**Building TDE R14.0.4 on the Raspberry Pi3**
BUILD-TDE.sh has been set up with an option to build TDE on the Raspberry Pi3, with [Sarpi](http://sarpi.fatdog.eu/index.php?p=home) supplied kernel/modules/firmware.
All packages build on Slackware current and 14.2. There have been a number of patches to the source code for gcc 7.x.x, which is used on current.
Build times are as shown, with the number of parallel jobs set at 8 [1], and with one internationalization locale being included. The build was run with the top off the Pi casing, and the cpu temperature generally remained below 80 °C, occasionally peaking at about 82.5 °C. All four cpus ran @ 1200MHz [2].
[1] This may not be the optimum. Based on a sample, builds may be quicker or slower at -j6, some with little difference at -j4, so YMMV. I assume this is because [performance is degraded](https://www.raspberrypi.org/documentation/configuration/config-txt/overclocking.md) at temperatures in excess of 80 °C.
[2] `echo ondemand > /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor` if needed.
[3] Avahi-tqt needs libdaemon and avahi packages installed, and these can be built on the Pi from the SlackBuilds.org scripts.
[4] The inkscape build is memory intensive, and using too much swap slows the build. The best compromise is to build it separately and set NUMJOBS to -j3. ( [a] - inkscape-0.91, built with '-j1'/gcc-7.1.0/poppler-0.57 // [b] inkscape 0.92.2 cmake build with '-j3'/gcc-7.2.0/poppler-0.59.).
[5] Both inkscape 0.91 and tdegraphics builds on current with poppler 0.59 failed because of the introduction of a new Object API in poppler 0.58. The tdegraphics build was done with poppler 0.57.
**Build times**
Current - hard float Current - hard float 14.2 - soft float
without heatsinks with heatsinks with heatsinks
Required:
tqt3 50:39 45:52 39:48
tqtinterface 4:26 3:43 2:11
arts 6:47 6:07 5:37
dbus-tqt 24 26 23
dbus-1-tqt 51 45 40
libart_lgpl 35 35 30
tqca-tls 22 21 18
tdelibs 52:12 49:32 42:59
tdebase 54:47 49:01 44:02
------- ------- -------
2:51:03 2:36:22 2:16:28
Core:
tdeutils 12:29 10:57 10:24
tdemultimedia 43:46 42:13 39:02
tdeartwork 4:53 4:20 4:01
tdegraphics 21:21 21:14 [5] 17:59
tdegames 14:21 12:43 12:20
libcaldav 1:51 1:20 1:23
libcarddav 1:18 1:13 1:17
tdepim 1:00:09 53:01 47:20
tdeaddons 8:46 8:19 7:19
tdesdk 24:38 21:20 18:37
tdevelop 41:40 36:17 31:32
tdetoys 2:13 2:09 1:58
tdeedu 36:07 35:04 34:31
tdewebdev 23:48 23:26 21:06
tidy-html5 1:19 1:11 59
speex 47 44 42
tdenetwork 38:49 33:12 28:58
tdeadmin 6:31 6:27 5:50
tdeaccessibility 10:27 10:41 9:48
tde-i18n 13:42 13:13 12:41
------- ------- -------
6:08:55 5:39:04 5:07:47
Apps/Libs/Misc:
GraphicsMagick 7:08 5:36
abakus 1:05 53
avahi-tqt [3] 2:16 1:35 1:31
digikam 32:17 25:28
dolphin 1:18 1:05
graphviz 21:36 17:34
gtk-qt-engine 46 39
gtk3-tqt-engine 2:35 2:31
inkscape [4] 3:11:11 [a] 1:33:28 [b] 1:29:09
k9copy 5:27 5:22
kaffeine 6:28 6:19
kbfx 2:03 1:47
kbookreader 1:45 1:40
kdbg 2:26 2:11
kdbusnotification 1:36 1:36
kile 5:40 5:22
kipi-plugins 13:02 13:10
knemo 2:46 2:33
knights 2:45 2:33
knmap 2:09 2:07
koffice 3:40:32 3:24:30
koffice-i18n 1:08 1:10
krusader 8:23 8:19
kscope 3:16 3:00
ksensors 2:24 2:17
kshutdown 2:24 2:19
ksquirrel 5:37 5:26
kvkbd 1:51 1:41
kvpnc 8:14 7:48
libksquirrel 11:54 11:53
libmp4v2 3:21 2:12
libpng 39 31
lxml 9:00 7:19
moodbar 37 34
piklab 19:18 16:24
potrace 1:09 36
potracegui 1:53 1:46
rosegarden 28:04 19:35
soundkonverter 4:42 4:18
tde-style-lipstik 1:50 1:52
tde-style-qtcurve 1:25 1:19
tdeamarok 9:30 9:12
tdefilelight 49 43
tdegwenview 5:31 4:46
tdegwenview-i18n 2:20 2:27
tdeio-locate 37 35
tdek3b 9:25 8:08
tdek3b-i18n 30 20
tdektorrent 13:04 12:17
tdelibkdcraw 2:42 2:34
tdelibkexiv2 1:51 1:52
tdelibkipi 2:25 2:19
tdesudo 1:31 1:35
tdmtheme 1:35 1:36
twin-style-crystal 1:55 1:55
xmedcon 1:58 1:46
yakuake 2:09 2:08
yauap 5 5
-------- -------
11:41:57 9:08:13
Overall total 20:41:55 16:32:28