Kile"> ATEX"> ATEX"> EX"> teTEX"> TeX Live"> EX"> EX"> ImageMagick"> KDE"> KDVI"> dvipng"> KGhostView"> KPDF"> PostScript"> makeidx"> Kate"> CJK"> ucs"> URL"> ]> The &kile; Handbook JonathanPechta FedericoZenith
zenith@chemeng.ntnu.no
HolgerDanielsson
holger.danielsson@versanet.de
ThomasBraun MichelLudwig
michel.ludwig@kdemail.net
2003 Jonathan Pechta 200320052006 Federico Zenith 20052006 Holger Danielsson 2007 Thomas Braun 2007 Michel Ludwig November 19, 2007 2.0 &FDLNotice; &kile; is a &tex; and &latex; source editor and shell. KDE kdenonbeta Kile LaTeX TeX
Preface Requirements To Run &kile;, you will be required to have the following components installed on your system: K Desktop environment (&kde;): &kde; is a popular open-source desktop environment. Qt: Qt is a C++ GUI and network library needed to compile &kile;. &latex;: high-quality document typesetting program. Most likely you want the &texlive; (or on older systems the &tetex;) package, if you are on a Unix-like system. Most of these items might be included in your Linux distribution; please refer to your distribution documentation, or refer to your installation CD or DVD, for adding these packages to your computer. The &kile; project includes several binary packages of &kile; for different distributions that can be easily installed and run without having to compile; check out the &kile; homepage. Intended Audience This manual is intended for any individual, regardless of her or his experience with &latex;, &kde;, &kile; or Linux. Advanced users are not likely to read this manual, but all suggestions on documentation will be considered. If you would like to contribute to this project or the documentation, please consult the &kile; web page. Need answers about &kile;? Are you stuck with your compile? Want to see a new feature? The preferred way to ask technical questions or start a discussion is to use our mailing list: kile-devel@lists.sourceforge.net. Introduction Basic facts About &kile; &kile; is an integrated &latex; environment for the &kde; desktop. &kile; gives you the ability to use all the functionalities of &latex; in a graphical interface, giving you easy, immediate, and customized access to all programs for &latex; codecompletion, compiling, postprocessing, debugging, conversion and viewing tools; you also get very handy wizards, a &latex; reference and a powerful project management. What is &latex; &latex; is a text-processing system derived from &tex;, a program developed originally in 1977 by Donald Knuth to help him layout his work professionally, obtaining a work similar to a typesetter's; the typesetter is the professional that styles a document's look according to specifications for the type of document. &latex; was created by Leslie Lamport to give authors an automatic typesetter, especially when it came to the expensive and painstaking typesetting of mathematical formulas and expressions, that by no chance are enclosed in dollar signs in &latex;. Today, word-processing programs let any user be the typesetter; but what you often want is a document that looks good, not one that you spent hours on to make it look good. &latex; takes that burden, and lets you think of the document, not of the layout. And yes, it will look good! How do you pronounce it? Why that strange typesetting? There is a funny traditions of &tex;-related packages to have the strangest pronunciation and typesetting possible. &tex; was supposed to be brought in from the Greek τεχ, in Latin letters tech. There are a lot of explanations why, but most likely it is because &tex; was originally conceived for technical reports, and indeed its foremost ability was the correct and easy typesetting of mathematical formulae, then an extremely expensive, time-consuming and frustrating business. The pronunciation is supposed to be as follows: T as you would expect, E as in get, and X as in the German ich. If you do not know what ch sounds like, it is more or less as an hissing cat; the IPA symbol is /ç/. Many people report the different pronunciation of ach (IPA symbol /x/), but I have personally asked some Greeks, and can confirm the first version. You should be aware that a lot of people mispronounce /teks/ or /tek/. Last, in &latex; the first LA is pronounced as lay: the idea is that, while raw &tex; is difficult, even a layman can use &latex; macros. A less inspiring, but more realistic explanation is that it stems from the surname of Leslie Lamport, the creator of &latex;. Now you know! &latex; 101 The &latex; typesetting system is similar to other markup languages as XML, used for many types of documents (including the one you are reading), or HTML, used for web pages. The general idea is about having specially wrapped keywords, called tags, that tell a program (a word processor, a web browser, or the &latex; compiler) how to present text. &kile; offers you a good number of such tags in the menu LaTeX in the menu bar. While we will try to give you a good idea of what &latex; is, this is not The Definitive Book on &latex;. If you want to learn &latex; well, you may want to loan a book in your library. The writer has had a good experience with A Guide to &latex; by H. Kopka and P. W. Daly, and still keeps it on the shelf. As other markup languages, &latex; contains a preamble, which sets global commands, such as paper size, page numbering, dimensions of the text on the page, and a body, that contains the document text; the preamble contains at least the \documentclass command, and precedes the body, that starts with the command \begin{document}, and is quite predictably concluded by the command \end{document}. &kile;'s Main Features QuickStart Wizard The QuickStart wizard built into &kile; is a useful feature to quickly start creating documents in &kile;. Choosing the wizard from the menubar gives you several choices for the creation of your document. You can also specify some options related to the document right away. Class options: Document Class: choose the type of document you want to create: article, book, letter, report, scrartcl, scrreprt, scrbook, prosper, beamer or other custom-defined. Typeface Size: tell &kile; what point size (pt) you want to use. Paper Size: choose the size or style of sheets. Encoding: In general it is a good idea to use your systems standard encoding. Modern systems now move more and more to UTF-8 as the standard encoding. If you can, use utf8x (which is indeed the correct spelling for &latex; documents). Other options: this allows you to set further options such as printing, draft, and others. Packages This lists some of the most common additional packages used in &latex;. Select the checkbox to include it. Document Properties Author: put your name here. Title: add the document title here. Date: specify the date. Predefined Templates The predefined templates in &kile; are: Empty document: real freaks start from scratch! Article: sets the article format, for a document short enough not to be broken down to chapters. Report: sets the report format, for a middle-sized document, with for example page numbering on the page's outer edge. Book: sets the book format, a full-fledged flavor, so powerful that it is used to write many university textbooks. Letter: sets the letter format, that can automatically do those nasty indentations that nobody really remembers. Beamer,HA-Prosper: create nice presentations in PDF with a superior look and all &latex; power. Scrartcl,Scrbook,Scrreprt,Scrlttr2: the KOMA-Script document classes, especially adapted to german typography. Use them whenever you write german texts. New users need not to worry, this list is just a brief description of features, and more attention will be paid to complete these tasks in detail later in . Syntax Highlighting &kile; is similar to programs that deal with source code and editing, and will automatically highlight commands, options and items that are used (and abused). &kile; makes it possible to spot easily problem areas: for example, if you see major areas of text turned green, it is likely that you forgot closing a math environment somewhere; you would have noticed anyway by how crappy the output file would have looked, but highlighting really saves you time and frustration. Auto-Completion of Environments The auto-completion of environments means that, when you begin a new environment by typing \begin{environment}, &kile; will automatically insert a matching \end{environment} command, with a line in between them for your text. You can of course deactivate it if you want in SettingsConfigure Kile... LaTeXEnvironments. Jump to Structure Element All documents are normally structured in a hierarchy of some type. &latex; allows you to break up documents into the following hierarchy (part being highest in the hierarchy, and subparagraph being lowest): \part \chapter \section \subsection \subsubsection \paragraph \subparagraph When viewing a document in the Structure view, you can jump between elements by clicking on the element you would like to view. Inverse Search When creating your own &latex; files, inverse search can be very helpful. Once you have created a DVI file (DeVice Independent File), you can click the middle- mouse button in the DVI viewer and &kile; will jump to the corresponding line in the &latex; source code. A DVI is a type of file containing a description of a formatted document, along with other information including character font, and is besides PDF the usual output of &tex; or &latex;. A number of utilities exist to view, convert and print DVI files on various systems and devices. Forward Search When using inverse search, the selection of items in the DVI file is associated with the editor, so when you click on the DVI file, the main window jumps to the corresponding section of &latex; code in the editor. Forward search is the exact opposite of this. Forward search will allow you to click on a specific section of text in the &latex; code, and jump to the associated position in the DVI viewer window. The Toolbar New: begin a new document. Open: open a new document. Close: close your document. Define document as master: this is used when working with multiple files. Having a master document will let you work more easily with other .tex files included in your document. If you are using projects, you can also set in Project->Project Options a project-wide master document. Quickbuild: compiles your &latex; source code and displays the results automatically, unless you have code errors. Watch file mode: this mode will "watch" the DVI file for changes, and will not launch a new session of &kdvi; after Quickbuild. View logfile: views the .log file, so you can spot errors. Previous error: jumps backward through the .log file and highlights errors in source. Next error: jumps forward through .log file and highlights errors in source. Stop: halts current tool. LaTeX: runs &latex; on the active document. View DVI: launches DVI viewer. DVI to PS: converts a DVI to a &postscript; (PS). View PS: launches &postscript; (PS) viewer. PDFLaTeX: runs &pdflatex; on the active document. View PDF: launches the PDF viewer. DVI to PDF: converts a DVI to a PDF. PS to PDF: converts a PS to a PDF. View HTML: views HTML created. Kdvi Forward Search: jump to page that corresponds to the current line in the editor. If you look at the Edit toolbar, you will notice three large drop-down menus. The drop-down menus were designed for you to be able to quickly add certain common features into your document. The first drop-down box is used for quickly dividing your document by parts, chapter, sections and so on; the available commands to add segments to your &latex; source code are: part: highest level of sectioning for a document. chapter: starts a new chapter. section: create a new section. subsection: create a new subsection. subsubsection: a secondary section between subsection and paragraph. paragraph: create a new paragraph. subparagraph: create a new subparagraph. The drop-down box named label is used to insert items to your document such as indexes, footnotes, and references; the available commands are: label: a command that produces a label for a chapter, a figure or another element. index: creates an entry for the index. footnote: creates a footnote in your document. ref: used to refer to a predefined label, which you can choose from a drop-down list. pageref: just like ref, but refers to a page instead of a structure element. cite: create a reference with data from a bibliography. cite from ViewBib: ask the ViewBib tool for all selected references and insert them. Currently this is only avaible with &kbib; as ViewBib tool. The Label drop-down menu The Label drop-down menu The Label drop-down menu Selecting the label for a reference Selecting the label for a reference Selecting the label for a reference When using cite, you are presented with a drop-down list of bibitems, but if you are using &bibtex; this will only work if the file belongs to a Project. For editing &bibtex; files the usage of specialised editors is recommened. The author has made good experience with &kbibtex; and &kbib;. Of course you can also write the &bibtex; files by hand inside &kile;. The last drop-down box labeled tiny is used to set the size of the text. You can set the size of the main text, of footnotes, and so on. The available commands are: tiny: smallest. scriptsize: very small. footnotesize: smaller. small: small. normalsize: normal. large: large. Large: larger. LARGE: even larger. huge: still larger. Huge: largest. Quickstart Writing a &latex; Document with &kile; for Beginners Users of &kile; have two choices when starting a new document: they can use the Wizard to begin a new document, select the type of document they would like to create and options such as font size, paper size, and so on; otherwise, they can write the code by hand. \documentclass[12pt]{article} \begin{document} Here is a bunch of text coded in \LaTeX. \end{document} Every document in &latex; begins with the command \documentclass[optional argument]{class}, where class specifies the document type. Typing in the code example above from the text box gives you the following output: Compiled text in DVI output Compiled text in DVI output Compiled text in DVI output The brackets that come after the command \documentclass contain the options for the command. The option [12pt] sets the size of the font for your article; if you do not set the font size in the beginning, you can set it later in the text. Once you have typed in the code example from the box above, you will need to compile your &latex; source code. The easiest way for you to compile &latex; is to use the Build menu, or using the Quickbuild button. &Alt;2 is the keyboard shortcut to compile your source code. You have to save your source code before you can compile; &kile; will do this automatically for you. If your document did not compile, check the log for errors. When using the Quickbuild key, the &kdvi; viewer should be launched automatically; if it does not, look at the log. Environments An environment is a segment of text that is managed differently than the rest of the document. For example, you create a report with font size 12, but you need to change your font size for a few sentences. The commands \begin{environment}, \huge and \end{environment} will let you temporarily alter the text inside the environment commands to be size huge. Changes are only effective from \begin{environment} to \end{environment}. There are no limits as how many changes you can make inside an environment. There are many features you can add to your document that will make it more readable and user-friendly. You can add features such as specific fonts, bold, italics, underline etc. to your document, and these commands will end with either an \end command, or at the end of your environment. \begin{emph}: this command makes text italicized, and is valid until the code comes across a \end{emph}, \end{emph} or another environment. To italicize one word in a sentence, you can use the syntax: this is \emph{my} sentence. \textbf{I am making this text inside the brackets bold}: this command makes your text bold. \quote: to create a quote inside your document; begin your quote with \begin{quote} and end it with \end{quote}. \center: centers the text. \verse: creates offset text for poems. \itemize: makes an itemized list. Using &kile; Now that we have given you some background about how to write code using the &latex; markup language, we will show you how to create a document using &kile; step-by-step. Start &kile;. Select WizardQuick Start, then choose a format, and set your preferences in the wizard. Once the wizard has entered text, do some customization to make the document more readable, add a minimum of one quote, some bold text, italics, and a verse to see the difference between the commands. Save your file, and give it the name intro.tex. Build your document using &Alt;2, or the button labeled LaTeX. Select View DVI. Check out all your new text. When you are done viewing your document, click the Editor View button or press &Ctrl;e to return to the editor if you are using the embedded viewer, or close the viewer window if you are using a separate viewer. That's it! You have just created your first &latex; document! Once you have created your DVI, you will be able to print your document, or change it into a &postscript; or PDF file if you want. Experiment and have fun! DVI Files DVI stands for DeVice Independent file. These files are produced by &tex; or &latex; to be read by a driver of some sort on your computer. There are many different types of output that a .dvi can be sent to, such as a printer, &postscript; or PDF file converter, or your computer screen. Viewing a DVI You have already seen how to view a DVI file on the screen by using the View DVI button in the toolbar. Printing a DVI To print a DVI, you can use the same process that you used to create your document earlier (see ). At step 7, after clicking View DVI, select FilePrint in the viewer, and if you have your printer properly configured, you will be able to print the DVI. Converting DVI files The toolbar gives the options of Converting a DVI to other formats. Once you have created a DVI from your &latex; source code, you will be able to export it to a format of your choice using the toolbar buttons. Forward Search between &kile; and &kdvi; The forward search functions allow you to jump from your editor directly into the associated position of the &DVI; file. &kile; offers a configuration with this option for all &latex; binaries. Go to SettingsConfigure Kile... ToolsBuild and always choose the Modern configuration. To execute a forward search, position the cursor on a line of source code, and click Kdvi Forward Search to jump to the associated position in the DVI viewer window. Inverse Search between &kile; and &kdvi; Inverse search is a very useful feature when you are writing a &latex; document yourself. If everything is set up properly, you can click into &kdvi;'s window with the &MMB; (on some systems, when you do not have a three-button mouse, you can simultaneously use the left and the right button). After that kile load the &latex; source file and jump to the proper paragraph. To use inverse search, you have to compile your &latex; file with the Modern configuration. Inverse search cannot work unless: The source file has been compiled successfully. &kdvi; knows which editor you would like to use. With this feature of &kdvi;, a middle mouse click in the DVI document will result in &kile; opening the corresponding &latex; document and attempt to go to the corresponding line. Remember to tell &kdvi; to use &kile; as a text editor, in &kdvi;'s menu item SettingsDVI Options.... Configuring &kdvi; Configuring &kdvi; Configuring &kdvi; Resolving Errors If you are trying to use quickbuild, and the DVI viewer does not open, chances are you have an error. If you have an error, it will be visible in the log file / message area, and the summary of the error will be given. The log file will explain the source of the error in your code. In the editor, you can use the buttons in the toolbar labeled Previous LaTeX Error and Next LaTeX Error to jump to and from errors. The log file always states in which line the error occurred. To view the line where an error occurred, click on the error in the log window, and &kile; will take you to error's line. Starting a New Document When you click the button in the toolbar to begin a new document a dialog appears, asking which type of template you would like to use to write your document. The default choices are: Empty document Article Beamer Book HA-Prosper Letter Report Scrartcl (from the KOMA-Script package) Scrbook (from the KOMA-Script package) Scrlttr2 (from the KOMA-Script package) Scrreprt (from the KOMA-Script package) If you selected an Empty document, you can either start writing a document from scratch, or you can use the wizard to quickly start a new document (see ). Templates Frequent users of &latex; typically use the same preamble for almost every document they use. Templates can be created, saved and loaded within &kile; to make it easier to start a new document. Create a New Template To create a new template, you must first either open a &tex; / &latex; file, or create a file of your own. &kile; can generate a template from an existing document by opening the desired document and selecting FileCreate Template from Document. Configuring Automatic Substitutions When creating a new document by selecting a template from FileNew, certain character combinations will be replaced by data such as your name, or the character encoding your are using. These variables can be configured in SettingsConfigure Kile... SettingsGeneral. When designing your own template, it is useful to known which character combinations are replaced by which template variables: $$AUTHOR$$: This string will be replaced by the author variable. $$DOCUMENTCLASSOPTIONS$$: This string will be replaced by the documentclass options variable. Typically this is used as follows: \documentclass[$$DOCUMENTCLASSOPTIONS$$]{article}. $$INPUTENCODING$$: If the inputencoding variable is set to, say, latin1 this string is replaced by \input[latin1]{inputenc}. Create a Template from the Wizard The easiest way to create a new template is to start the wizard, and then add commands in the editor. Once you have your document set up the way you like: Save your file; Go to File; Choose Create Template from Document; Make any corrections necessary to the template; Enter a name for your new template; Click OK to add your template to the menu. Next time you start up a new document, you will be able to choose your customized template instead of the default ones. Creating a Template from any File A template can be created from any &latex; file. If you are looking for an easy way to configure a template, go find one you like on the Internet and follow the same steps listed in . For instance, you may want to create a full-fledged A0 poster. These posters are usually seen at scientific conferences, and &latex; will help you making an attractive, catchy poster. You can get a template for A0 posters at Jonathan Marchini's home page, but many more are available. Remember that you will need the a0poster package, which is normally not in standard tex distributions included. Download it from here and place it in the same directory as your &latex; file. Removing a Template To remove a template from &kile;, do as follows: Go to FileRemove Template...; A dialog box will appear with all templates listed: select a template; Click OK, and your template will be removed. Templates marked with an asterisk (*) cannot be removed without the proper permission. Editing &latex; Documents The internal editor that &kile; uses is &kate;. Kate is a text editor created for programmers, which incorporates the ability to read and highlight many different types of text files, among which are &latex; and &bibtex;; you can access many options for &kate; directly from &kile;'s Tools menu. To learn more about &kate; and its capabilities, see the Kate Handbook. &kile; users can start reading from the chapter Working with the Kate Editor. The &latex; Reference &kile; features a very practical &latex; tag reference, which you can access by choosing HelpLaTeX Reference. It contains a thorough description of almost all the commands that you may use in &latex; and their syntax. Cursor Movements To select text, you have the following options: Hold left mouse button, and drag mouse to highlight text. Click once on a word to move the cursor to a new area. Click twice on a word to select the whole word. Click twice on a word and pressing &Ctrl; to select the whole tex word. This means clicking in this way on \par from \par\bigskip only select \par. Click three times to select the whole sentence. Holding the left mouse button, and dragging the text you want to select, automatically copies the selected text to the clipboard. Holding shift and using the arrow keys allows you to select portions of the source code in the editor window. Brackets Bracket completion is a visual tool that the editor view uses to indicate you which bracket matches which. If you open any .tex file, and select any bracket, whether it be a parenthesis (), square brackets [] or braces {}, the editor will highlight the bracket and its match in yellow (this default color can be changed). So, for example, if you position the cursor on the braces in \section{Introduction}, you would see \section{Introduction} in the default yellow highlight, showing you the location of the beginning and ending brackets. Highlighting &kile; has the ability to look for and highlight different types of code. For example, &latex; commands are distinguished from normal text, and math formulas are highlighted also in a different color. Bullets Many wizards can insert optional bullets, a special kind of bookmarks within the text. The menu entries EditBullets or the corresponding keyboards shortcuts will allow you to jump to the next or last bullet. This will also highlight this bullet so that it will be deleted automatically, when you enter your first letter. Bullets Bullets &Ctrl;&Alt;Right Next Bullet Jump to the next bullet in the text if there is one. &Ctrl;&Alt;Left Last Bullet Jump to the previous bullet in the text if there is one. Select Editing is of course one of the main aspects when you use a program like &kile;. Although &kate; already has great capabilities, &kile; adds some important features, which are especially needed to write &latex; source. &latex; always needs a lot of environments and groups, so &kile; supports very special commands to select them. Under EditSelect you will find the following commands to select text. Edit->Select items Edit->Select items &Ctrl;&Alt;S E Environment (inside) Select an environment without the surrounding tags. &Ctrl;&Alt;S F Environment (outside) Select an environment including the surrounding tags. &Ctrl;&Alt;S T TeX Group (inside) Select a TeX group inside the surrounding braces. &Ctrl;&Alt;S U TeX Group (outside) Select a TeX group including the surrounding braces. &Ctrl;&Alt;S M Math Group Select the current math group including the math commands. &Ctrl;&Alt;S P Paragraph Select a whole paragraph, &ie; a group of text lines separated on both sides by empty lines. A paragraph does not mean just continuous lines of text, as it is in other text editors. This extended meaning also includes tables, &latex; commands and all other lines of source. The only important thing for &kile; is that kind of paragraph is separated by two empty lines. &Ctrl;&Alt;S L Line Select the text line of the current cursor position. &Ctrl;&Alt;S W TeX Word Select the word under the current cursor position. This selection has also en extended meaning, because this command can also select &latex; commands, which begin with a backslash and may also have an optional star at the end. Delete To delete some parts of a document you can of course select them, and then use the Delete key. Kate also offers the command &Ctrl;K which deletes the hole line.But &kile; offers a faster way with its own delete commands. Under EditDelete you will find following commands to delete text. Edit->Delete items Edit->Delete items &Ctrl;&Alt;T E Environment (inside) Delete an environment without the surrounding tags. &Ctrl;&Alt;T F Environment (outside) Delete an environment including the surrounding tags. &Ctrl;&Alt;T T TeX Group (inside) Delete a TeX group inside the surrounding braces. &Ctrl;&Alt;T U TeX Group (outside) Delete a TeX group including the surrounding braces. &Ctrl;&Alt;T M Math Group Delete the current math group including the math commands. &Ctrl;&Alt;T P Paragraph Delete a whole paragraph. Look at the SelectParagraph command, how a paragraph is defined in &kile;. &Ctrl;&Alt;T I To End of Line Delete the text from the current cursor position to the end of the line. &Ctrl;&Alt;T W TeX Word Delete the word or &latex; command under the current cursor position. Environment It was already mentioned that environments are a central point in &latex;. So &kile; offers five other commands to make the work with &latex; as easy as possible under submenus EditEnvironment. Edit->Environment items Edit->Environment items &Ctrl;&Alt;E B Go to Begin This command will jump to the beginning of the current environment, wherever your current position is. The cursor will be placed directly in front of the opening environment tag. &Ctrl;&Alt;E E Go to End This command will jump to the end of the current environment, wherever your current position is. The cursor will be placed directly behind the closing environment tag. &Ctrl;&Alt;E M Match When your cursor is placed in front of or above the \begin{environment} tag, it will be moved to the opposite end of the environment and vice versa. &Ctrl;&Alt;E C Close Typing a lot of nested environment tags, you may lose control of all those environments. This command will close the last opened environment, so that the nested structure of environments will not be broken. &Ctrl;&Alt;E A Close All This closes all open environments, not only the last opened environment. &tex; Group &kile; also offers some special commands for &latex; groups;, which are determined by braces {...}. In submenu EditTeX Group you will find some important commands, which correspond to those from EditEnvironment. Edit->TeX Group Edit->TeX Group &Ctrl;&Alt;G B Go to Begin This command will jump to the beginning of the current group, wherever your current position is. The cursor will be placed directly in front of the opening brace. &Ctrl;&Alt;G E Go to End This command will jump to the end of the current group, wherever your current position is. The cursor will be placed directly behind the closing brace. &Ctrl;&Alt;G M Match When your cursor is placed in front of or behind an opening brace of a &tex; group, he will be moved to the opposite end of the group and vice versa. &Ctrl;&Alt;G C Close Typing a lot of nested group braces may be hard work. This command will close the last opened group, so that the nested structure of &tex; groups will not be broken. Double Quotes In &latex;, two single quotes are used as double quotes. To help you insert these efficiently, &kile; allows you to press " to insert two opening single quotes. Furthermore, if you want to close a quotation, you also have to press ". &kile; will be smart enough to recognize this case and inserts two closing quotes for &latex;. To get a literal double quote on the other side, press " twice. You can enable or disable this auto insertion of opening and closing double quotes in section SettingsConfigure Kile...LaTeX. Double Quotes Double Quotes If you also include language-specific options like ngerman or french, you will also be able to use German or French double quotes. Many more languages are available. Smart Newline If you press &Shift;Return, &kile; inserts an intelligent newline. If your current position is inside a list environment, like enumerate or itemize, &kile; will not only insert a newline, but also add a \item command. If you are inside a tabular environment, &kile; will finish the current line with \\, followed by the newline. If you are inside a &latex; comment, &kile; will start the next line with a %. Even better, &kile; is smart enough to support predefined &latex; and user defined environment, which can be added in section SettingsConfigure Kile...LaTeX. Smart Tabulator Some users like to arrange columns in tabular environments and put all ampersand characters & beneath each other. &kile; tries to support this. If you press &Shift;&Alt;&, &kile; will look for the next tab in the row above. Although his which may not the corresponding tab, &kile; will add some spaces to adjust the column position with the current tab. Code Completion Although &kate; already offers a good completion mode, &kile; extended code completion to support some special methods especially for &latex;. Five different modes are integrated. Three of them work on demand, the other two are autocompletion modes. All modes can be configured to work very differently at SettingsConfigure Kile.... Automatic Environment Completion When you begin a new environment, typing \begin{environment}, &kile; will automatically add an \end{environment} command, with a line in between for your text. Autocompletion can be turned off in the &latex; section of SettingsConfigure Kile... LaTeXEnvironments. Completing an Equation Environment Completing an Equation Environment Completing an Equation Environment &latex; Commands When you type some letters, you can activate this completion mode for &latex; commands and normal words with EditComplete(La)TeX Command or the keyboard shortcut &Ctrl;Space. &kile; first reads the letters from the current cursor position to the left and stops at the first non-letter character or a backslash. If this pattern begins with a backslash, &kile; will enter completion mode for &tex; or &latex; commands. Otherwise it enters normal dictionary mode, where you will not find any &latex; commands. Depending on the chosen mode, a completion box will be opened. You will see all commands or words whose beginning matches the current pattern. You can navigate with the cursor keys through this list and select one entry with &Enter; or a double click with the mouse. Completing a LaTeX Command Completing a LaTeX Command When you push the &Backspace; key, the last letter of your pattern will be deleted, and the completion list may grow. On the other hand, if you type another letter will expand the pattern and the visible word list may shrink. If you decide not to select any of the suggestions, you can leave this dialog with &Esc;. You will see that all commands are written with a short description of their parameters. These descriptions are of course stripped when you select a command. Optionally you can let &kile; insert bullets at these places, so that you can easily jump to the these positions with EditBulletsNext Bullet and insert the parameter you want. Completing a LaTeX Command Completing a LaTeX Command Go to SettingsConfigure Kile... KileComplete to configure one or more of these lists. You can choose different word lists for &tex; and &latex; commands and dictionary mode for normal words. Environments The command mode is not useful to complete environments. You always have to type some letters of \begin, and invoking the completion mode will result in a huge list of environments tags. On the other hand, environments are so often used that &kile; offers a special mode to complete environments. Forget the opening tag and write, for example, eq. When you call the completion mode with EditCompleteEnvironment or keyboard shortcut &Alt;Space, the opening tag is automatically added and you will see \begin{eq}. After this change, the completion list is much less cluttered. Completing a LaTeX Command Completing a LaTeX Command Now select an environment, and you will see that it is also automatically closed. Even more, if &kile; recognizes it as a list environment, it will also insert a first \item tag. Completing a LaTeX Command Completing a LaTeX Command Go to SettingsConfigure Kile... KileComplete to configure one or more of these lists. This mode uses the same word lists as the completion mode for &tex; and &latex; commands. Abbreviations &kile; supports user defined lists of abbreviations, which are replaced on demand by longer text strings. Look at SettingsConfigure Kile... KileComplete to configure one or more of theses lists. For the example given here, the abbreviation list in example.cwl must be chosen. In this file you will find for example the entry L=\LaTeX for example. For example, type only the letter L. Now invoke the abbreviation mode of word completion with EditCompleteAbbreviation or keyboard shortcut &Ctrl;&Alt;Space, and the letter L is replaced by the string \LaTeX. Autocompletion Modes &latex; Commands You can also enable an autocompletion mode for &latex; commands. When a given threshold of letters (default: 3) is entered, a popup window opens with a list of all matching &latex; commands. You can select one of these commands, or ignore this window and type further letters. The entries of the completion box will always change and match your currently typed word. Go to SettingsConfigure Kile... KileComplete to enable or disable this mode or to change the threshold. Completing an Equation Environment Completing an Equation Environment Document Words Large dictionaries are not useful in autocompletion mode. But, we have seen that a lot of words in a document are typed more than once. So &kile; offers a completion for all words from the document that the user has already typed before. If you want to turn this mode on or off, go to SettingsConfigure Kile... KileComplete. In this configuration dialog you can also change the threshold at which the completion box pops up. Writing Own Completion Files The specification of the completion file format can found in the CWL file format specification. Completion files can be installed in a user's home directory under the ~/.kde/share/apps/kile/complete/<mode>/ subdirectory, where <mode> either stands for abbreviation, dictionary or tex. Wizards and Dialogs Include Graphics The Include Graphics dialog makes insertion of graphics as easy as possible. Please take a look at and to get an overview of some basic facts concerning graphic formats. Including a graphics element Including a graphics element Choose a graphics file. This can be a JPEG, PNG, EPS or even a zipped or gzipped EPS file. If you have installed &imagemagick; and also configured &kile; to use it (SettingsConfigure Kile... LaTeXGeneral), the width and the height of the graphic is automatically shown. If &imagemagick; can determine a resolution, the size of the graphics is also shown in centimeters. Decide whether your image shall be centered on the page. Choose either traditional &latex; or &pdflatex;. Please remember that &pdflatex; can also create DVI output, not only PDF. You can choose whether the filename should be taken relative. This is the preferred way, when you use the \graphicspath command. By default graphics files have to be in the same folder than your master document. However it is possible to put them in other folders to make things tidier. Without a \graphicspath command, &kile; would include the path for the graphics file. But if you use \graphicspath, like: \graphicspath{{/path/to/my/graphics}{other/path/to/more/graphics}} and check this option, &kile; with only use the base name of the graphics file. Another example: if you set \graphicspath command like: \graphicspath{{./}{camera/}{images/}} &latex; will search in the current folder, then in camera and finally in images to find your graphics file. If you choose either a width or a height, the whole graphics will be proportionally scaled. If you set two values for width and height at the same time, width and height may be scaled with different factors, and this could not be what you want. See also the information near the top of dialog to know the original size of the graphics. Insert an angle by which to rotate the graphics counterclockwise. The bounding-box information is set automatically when you choose a graphics file. This information is only needed when you work with traditional &latex; and bitmapped graphics. See the discussion of EPS graphics. Your last choice is whether to embed this graphics into a figure environment. If you decide to do so, you can also insert a caption and a label. It is a good idea to add a different prefix to each kind of label. It is common to use the prefix fig: for images. Array Wizard One of the most boring jobs one can do in &latex; is to write a matrix or a tabular environment. One has to keep track of all the elements, ensure that the environment is well formed, and that all things are where they are supposed to be. Good indentation helps, but there is a simpler way: using &kile;'s Wizard menu. It contains Tabular and Array (used in math environments). You will then have a matrix-formed input form that you can easily fill in with your entries. This dialog also offers some options to typeset the tabular material. Inserting a tabular environment Inserting a tabular environment The Tabbing option will display a simpler menu to set up a tabbing environment. In all these environments, you can easily set the number of rows and columns, along with other specific options. &postscript; Utilities PS files are not so popular as PDF files, but are an excellent base for manipulations and rearrangements of pages. If you need PDF output, you can rearrange pages with some &postscript; utilities and then convert it to PDF with ps2pdf. The &postscript; Wizard will suggest the most popular rearrangements, but you are free to do your own choice. Work is done by the programs pstops and psselect, which you will find in most distributions in the package psutils. If one of these programs is not available, the corresponding item will not be visible. Dialog PSTools Dialog PSTools First choose your input file. If &kile; finds a PS file corresponding to your current master document, it is already filled in as input file, but you are also free to choose another file. Then choose an output file, and select one of the tasks. Finally, you have to decide whether you want to do the conversion only, or also invoke &kghostview; to view the result. 1 A5 page + empty page --> A4 Combine one A5 page together with one empty page on one A4 page. Whenever two A5 pages are combined together, they are rotated 90 degrees and will be arranged on an A4 page in landscape mode. A5 + empty page A5 + empty page 1 A5 page + duplicate --> A4 Put one A5 page and a duplicate together on one A4 page. duplicate A5 pages Duplicate an A5 page 2 A5 pages --> A4 Put two consecutive A5 pages together on one A4 page. Combine two A5 pages Combine two A5 pages 2 A5L pages --> A4 Put two consecutive A5 pages in landscape mode together on one A4 page. 4 A5 pages --> A4 Combine four consecutive A5 pages together on one A4 page. The A5 pages have to be scaled with factor 0.7 to fit on the page. 4 A5 pages --> A4 4 A5 pages --> A4 1 A4 page + empty page --> A4 Combine one A4 page together with one empty page on one A4 page. Whenever two A4 pages are combined together on one resulting A4 page, they have to be scaled with factor 0.7 and will be arranged in portrait mode. 1 A4 page + empty page --> A4 1 A4 page + empty page --> A4 1 A4 page + duplicate --> A4 Put one A4 page and a duplicate together on one A4 page. 1 A4 page + duplicate --> A4 1 A4 page + duplicate --> A4 2 A4 pages --> A4 Put two consecutive A4 pages together on one A4 page. Combine two A4 pages Combine two A4 pages 2 A4L pages --> A4 Put two consecutive A4 pages in landscape mode together on one A4 page. select even pages Select all even pages of a document. select odd pages Select all odd pages of a document. select even pages (reverse order) Select all even pages of a document and reverse the order. select odd pages (reverse order) Select all even pages of a document and reverse the order. reverse all pages Reverse all pages of a document. copy all pages (sorted) Copy all pages of a document. You have to choose the number of sorted copies. Copy all pages (sorted) Copy all pages (sorted) copy all pages (unsorted) Copy all pages of a document. You have to choose the number of non-sorted copies. Copy all pages (unsorted) Copy all pages (unsorted) pstops: choose parameter There are many options for &postscript; utilities pstops and psselect. If you need a very special one, you can invoke pstops with an option of your choice. Please read the manual for all possible options. psselect: choose parameter You can invoke psselect with an option of your choice. Please read the manual for all possible options. Document Statistics The statistics dialog gives you an statistical overview for a selection, a document or an hole project. It includes the number of words, &latex; commands/environments and also includes the number of characters for each type. The statistical numbers can be copied as text or as a nice formatted &latex; tabular to the clipboard. If you want to get statistics for the hole project you can use FileOpen All Project Files for an easy and quick way to open all source files of your project. A note of caution has to be sounded about the accuracy of the numbers. We have included some logic to get a good estimate, e. g. K\"uhler gives one word and one command, with six resp. two characters. But there are other combinations in which parts of commands are counted as words and vice versa. It has also to be beared in mind that the algorithm was developed and tested for languages similiar to english or german. So don't take the numbers for granted. If you have to make an report with an exact numbers of words or characters, make some tests to check whether &kile;'s accuracy satisfies your needs. Special Tags in &latex; Using the &latex; Tag Library &latex; has thousands of tags for symbols and special characters. The easiest way to insert these tags is to use the sidebar menu, left of the editor window. The Sidebar Menu The Sidebar Menu The Sidebar Menu The following types are avaible: Most Frequently Used Relation Operators Arrows Miscellaneous Math Miscellaneous Text Delimiters Greek Special Characters Cyrillic Characters User Defined The tooltips of the icons show the &latex; commands and additionally needed packages. Pressing &Shift; and clicking a symbol will result in $\symbolcmd$ being inserted. Similiar pressing &Ctrl; inserts it in curly brackets. If you insert a command which requires a package which is not included in your &latex; document, you will see a warning message in the logview window. The first list of symbols holds the Most Frequently Used symbols. Inserted symbols will be added to this list, for quick and easy reference. The ordering of the symbols will not be changed upon addition of new symbols, instead a reference counter is incremented. If the number of items would exceed 30 items, the item wit the lowest count will get removed. The User Defined symbol list can hold your own symbols. To create your own symbols you need the program gesymb and the file definitions.tex from the kile source package. Additionaly you need a &latex; compiler (what a surprise) and &dvipng; (version 1.7 or later). The procedure is so that you create a &latex; file with \input{definitions}, which makes the commands listed below available, and let gesymb mysymbols.tex user (which calles &latex; and &dvipng;) create the icons. After copying them to $HOME/.kde/share/apps/kile/mathsymbols/user/ and restarting kile you can use your own symbols. The following commands are defined in definitions.tex: \command[\optarg]{\symbol}: Include the symbol \symbol in the symbol list, the optional argument \optarg specifies the command which kile should insert. If it is not given the command in the mandatory argument is used. \mathcommand[\optarg]{\symbol}: Same as above, except that the command in the mandatory argument is inserted in math mode. \pkgs[arg]{pkg}: Declare that the command given in this line needs the &latex; package pkg with the optional argument arg. This command has to be in front of the \command command and overrides any package specification by the neededpkgs enviroment. \begin{neededpkgs}[pkgs-args]{pkgs} ... \end{neededpkgs}: Has the same effect as above, but for all enclosed commands. An example for completeness is given here: \documentclass[a4paper,10pt]{article} \usepackage{amssymb} \input{definitions} % \begin{document} \pagestyle{empty} % \begin{neededpkgs}{amssymb} \mathcommand{\surd} \pkgs{amsmath}\mathcommand[\ddddot{}]{\ddddot{a}} \mathcommand{\angle} \end{neededpkgs} \command{\"A} \mathcommand{\exists} \mathcommand[\stackrel{}{}]{\stackrel{abc}{=}} %\begin{neededpkgs}[russian,koi8-r,T2C,]{babel,inputenc,fontenc,mathtext} % % \end{neededpkgs} % this would need to include the packages % \usepackage{mathtext} % \usepackage[T2C]{fontenc} % \usepackage[russian]{babel} % \usepackage[koi8-r]{inputenc} % just to explain the format \end{document} Using Bibitems \bibitem is a command used to enter a reference in a thebibliography environment in your document. The syntax for using \bibitem is \bibitem[label]{key}. The optional [label] is for you to add your own labeling system for the bibliography entry. If no label is set, the entries will be set in numerical order: [1], [2], [3], etc. The argument {key} is used to reference and link the commands \bibitem and \cite to each other and the information they contain. The command \cite contains the label associated with the intended \bibitem, which is located inside a thebibliography environment, and contains the reference data. Both corresponding \bibitem and \cite must have the same {key}; the easiest way to organize keys is by the author's last name. The secondary braces in the thebibliography environment denote the longest bibliography label you expect to have. So, inserting {foo} means you can have any label shorter or as large as the expression foo. Failure to set this parameter correctly may result in a not so attractive indentation of your bibliography. The bibliography is a section apart from your main document, and an example of code for the bibliography would look like the following: \begin{thebibliography}{50} \bibitem{Simpson} Homer J. Simpson. \textsl{Mmmmm...donuts}. Evergreen Terrace Printing Co., Springfield, SomewhereUSA, 1998 \end{thebibliography) Then, your main source code would contain the location of the information relating to the \bibitem using \cite. That source code would look similar to this: My thesis, about the philosophy of The Simpsons\copyright comes from my favorite book \cite{Simpson}. As it is often difficult to remember the exact citation key once you have many references, &kile; provides an easy way to insert a citation. On the Edit toolbar click on the second drop-down box (usually it reads label) and select cite. A list with all the citation keys pops up: select the correct reference and a citation will be inserted into your document. To update the list of keys, either save the file,EditRefresh Structure or press F12. The final product in your document's bibliography would then look like this: [1] Homer J. Simpson. Mmmmm...donuts. Evergreen Terrace Printing Co., Springfield, SomewhereUSA, 1998. The easiest way to work with \bibitem and \cite is to use the toolbar drop-down box marked cite. When you select a citation to insert, you will be given the list of bibitems you have created so far, and will be able to select the reference from the list. &kile; can also work together with &bibtex; editor applications, such as &kbibtex; to help make citations easier. User-Defined Tags &kile; gives you the ability to make your own tags. A tag is similar to a shortcut that launches some command or writes frequently-used text. For example, Joe Sixpack uses often the sentences I prefer \LaTeX\ to \TeX\ and What would I do without Linux?. To create user-defined tags to write these sentences, he would access LaTeXUser TagsEdit User Tags...; this will present him a dialog where he can create his own user-defined tags. The Edit User Tags Dialog The Edit User Tags Dialog The Edit User Tags Dialog Invoking a User-Defined Tag Invoking a User Defined Tag Invoking a User Defined Tag He would probably give each tag a name that can clearly identify it. The name you give your tag is entered in the section marked Menu item, and the text of frequently-used command should be entered into the section labeled Value. Once the commands are entered, he can use them quickly using the shortcut &Ctrl;&Shift;1 for the first tag to enter I prefer \LaTeX\ to \TeX\ and &Ctrl;&Shift; 2 to enter What would I do without Linux?. Placeholders in User-Defined Tags There are some placeholders you can use in user-defined tags: they are %B, %C, %M and %S. %B: will be replaced by a bullet. %C: this is where the cursor will be placed after the insertion of a user-defined tag. %M: this stands for marked text; the selected text is inserted in its place when inserting user-defined tags. %S: will be replaced by the source file's name without file extension. To show you how this works let's say for example that we have a user-defined tag, which contains the value \bfseries{%M}%C, and I have a selection of text highlighted in my document that we want to turn into bold text. So, we highlight the phrase I love Fridays, apply our user-defined tag by pressing &Ctrl;&Shift;1, and we get the text \bfseries{I love Fridays}, with the cursor placed at the end of the text. The Build Tools Compiling, converting and viewing To view the result of your work, you first need to compile the source. All the build tools are grouped closely together in the BuildCompile, BuildConvert, and BuildView menus. To compile your source code for screen viewers like &kdvi;, &kghostview;, &kpdf; or further conversion, you can use the shortcut &Alt;2. Then you can view the DVI file using your default viewer with &Alt;3, convert the DVI to a PS file with &Alt;4, and view the PS file with &Alt;5. &bibtex; If you are using &bibtex; for your bibliography entries, you usually have to follow a special compiling scheme. This means calling &latex; and then &bibtex; and then &latex; twice again. Fortunately &kile; is clever enough to detect automatically if it is necessary to call additional tools like &bibtex;, &makeidx; and &asymptote;. This logic is by default turned on and can be changed in SettingsConfigure Kile...ToolsBuild in the General tab in the &latex; and &pdflatex; tools. &makeidx; If you are using the &makeidx; package to make a final, alphabetical index for your document, you have also to follow a certain compilation pattern or let &kile; do this for you in the same way as with &bibtex; files. MetaPost and Asymptote If you want to compile your document with MetaPost or Asymptote, picture drawing programs, you can do it with BuildCompileMetapost. or BuildOtherAsymptote. &pdflatex; There is also another way to compile your document, if you want a PDF: you can run &pdflatex;, that will compile the source directly into a PDF file, with &Alt;6: you can then view the compiled file pressing &Alt;7. Alternatively, you can convert a PS into a PDF with &Alt;8, or directly a DVI into a PDF with &Alt;9. Using &pdflatex; instead of &latex; may be just a matter of simplicity or habit, but sometimes the behavior of the two program can differ. &latex; to Web Finally, you may want to publish your work on the web and not just on paper. You may then use the latex2html program, that can be called from &kile;'s menu BuildConvertLaTeX to Web. The result will be placed in a subfolder of the work folder, and you will be able to see the result of the conversion choosing the menu item BuildViewView HTML. Passing Command-Line Parameters If you want to pass some specific command-line parameters to the compile, convert or view tools, you can configure their call in Settings Configure Kile...ToolsBuild. Quick Preview You will always need some time to view the result, when working with &latex;. &latex; has to compile the source and the viewer has to be called. This can be annoying if you only changed some letters in an equation difficult to typeset. &kile; offers a Quick Preview mode, where you can compile only a part of a document and save a lot of time. It supports four different modes, which can be combined with seven configurations. Quick Preview Quick Preview All settings must be done in SettingsConfigure Kile... ToolsPreview. Quick Preview Configuration Quick Preview Configuration Selection Mode The user has to select a part of the document. Menu entry BuildQuickPreviewSelection or the keyboard shortcut &Ctrl;&Alt;P,S will start the selected programs. &kile; takes the preamble of the original text, so that all packages and user defined commands are included. The user can choose one of seven predefined configurations: LaTeX+DVI (embedded viewer) LaTeX+DVI (KDVI) LaTeX+PS (embedded viewer) LaTeX+PS (KGhostView) PDFLaTeX+PDF (embedded viewer) PDFLaTeX+PDF (KGhostView) PDFLaTeX+PDF (KPDF) This should be sufficient for all situations for which a quick preview is needed. Environment Mode Very often you want to preview the current environment, and especially mathematic environments, which sometimes may be difficult to write. &kile; offers a very fast way to do this. No selection is needed, only choose BuildQuickPreviewEnvironment or the keyboard shortcut &Ctrl;&Alt;P,E and the current environment will be compiled and shown. Subdocument Mode If you have a large project with a lot of documents, compiling the whole project is not a great idea, if you have made changes only in one single document. &kile; is able to compile and show a preview of the current subdocument. It takes the preamble from the master document and only compiles the current part when you choose BuildQuickPreviewSubdocument or the keyboard shortcut &Ctrl;&Alt;P,D. Mathgroup Mode The mathgroup preview mode allows you to preview the mathgroup you are currently editing. &kile; takes the preamble from the master document and only compiles the mathgroup the cursor is currently in when you choose BuildQuickPreviewMathgroup or the keyboard shortcut &Ctrl;&Alt;P,M. Quick Preview in Bottom Bar Instead of showing the preview in a new document &kile; can also be configured to use the bottom bar for preview compilations. You can activate this feature in the quick preview configuration panel. Graphic File Formats &latex; and &pdflatex; &pdflatex;, when used with graphics or graphicx packages, can compile correctly PNG and JPG files into DVI or PDF, but is not able to handle EPS files. Conversely, the process of compiling with &latex; to DVI and converting to PS and eventually PDF does support EPS, but does not support PNG and JPG. A lot of users want to create PDF documents, but also want to use of the excellent Pstricks package to create &postscript; graphics, or they want to use the &postscript; output of mathematical and scientific software like Mathematica, Maple or MuPAD. These &latex; users have to compile first in &postscript;, even if they want to create PDF documents, because these programs produce &postscript; code which cannot be managed by &pdflatex;. However, it is not so hard as it may sound, because &kile; will help. Graphics Conversion To overcome this frustrating loop, in case you want to include both &postscript; code and PNG or JPG files, you have a number of workarounds: If you need a file in PS format, but have JPG or PNG graphics, you can also simply use &pdflatex; with DVI output first, and then run dvips to create the PS file. You see that &pdflatex; is a very good choice, if your source contains no &postscript; code at all. You can convert EPS files to PNG or other formats with utilities as the Gimp or &imagemagick; and use &pdflatex;. A preferred way is to convert EPS graphics to PDF graphics with epstopdf, which comes with every &tex; distribution distribution and then use &pdflatex;. It produces high quality graphics, and you can even control the result with some of the following options: -dAutoFilterColorImages=false -dAutoFilterGrayImages=false -sColorImageFilter=FlateEncode -sGrayImageFilter=FlateEncode -dPDFSETTINGS=/prepress -dUseFlateCompression=true Even better: if your system allows shell-escape, conversion can be done on the fly. All you have to do is to include the epstopdf package, which is part of all &tex; distributions, with command \usepackage{epstopdf}. Assuming that your code is \includegraphics[width=5cm]{test.eps} When you call &pdflatex; with option , graphics test.eps is automatically converted into test.pdf. This conversion will take place each time you run &pdflatex;. If your graphics command is given implicitly: \includegraphics[width=5cm]{test} epstopdf checks whether test.pdf is already available, so that conversion step can be skipped. You can convert the other way around, and use &latex; and PS-PDF conversion. This is not always a good idea, since EPS encapsulation of JPG or PNG can yield larger files, that in turn yield unnecessarily large documents. This is however highly dependent on the graphic utility that you use, since EPS can encapsulate other graphics, but not all applications support this perfectly. Some might actually try to build your JPG image with vectors and various scripting, which will result in gigantic files. Conversion of all graphics formats to EPS can be done by &imagemagick;. Another simple program that does this process correctly is jpg2ps. You can also use an automatic conversion. All graphic files are converted on the fly to EPS, and inserted into the PS document. This is a comfortable way, but you have to set up your system properly. This is discussed in the section EPS Graphics. Use the right File for the right Graphic EPS is sort of a graphic vector scripting language, describing all the lines and dots the graph is made of; it looks good even when magnified beyond its default size, and suits best diagrams and vectorial graphic natively produced in EPS, which look very clear and sharp while maintaining a very small byte size. PNG (or the deprecated GIF) is a non-lossy file format, with good compression and quality. It is very good for diagrams, scans of drawings, or anything whose sharpness you do want to retain. It is sometimes overkill when used for photos. JPG is a lossy format, that compresses files better than PNG at the price of some loss in the picture detail. This is usually irrelevant for photos, but may cause bad quality for diagrams, drawings, and may make some thin lines disappear outright; in those cases use EPS or PNG. But always remember: garbage in, garbage out! No conversion will make a bad picture good. EPS Graphics EPS graphics files are the traditional way to insert graphics files into &latex; documents. As mailing lists are full with questions concerning EPS graphics, we will discuss some important aspects and demonstrate how &kile; supports them. &latex; and EPS Graphics If you decided to use the traditional &latex; to produce PS or PDF output, you will probably run into some problems with graphics. You have to use EPS graphics (Encapsulated &postscript;), no JPEG or PNG files. This should be no problem, as there are a lot of converters like convert from the excellent &imagemagick; package. But, it needs some time of course. The EPS files are used by both &latex; and the DVI-PS converter: &latex; scans the EPS file for the bounding box line, which tells &latex; how much space to reserve for the graphics. The DVI-PS converter then reads the EPS file and inserts the graphics in the PS file. This has some implications: &latex; never reads the EPS file if the bounding-box parameters are specified in the graphics-insertion command. Since &latex; cannot read non-ASCII files, it cannot read the bounding-box information from compressed or non-EPS graphics files. The EPS graphics are not included in the DVI file. Since the EPS files must be present when the DVI file is converted to PS, the EPS files must accompany DVI files whenever they are moved. Now you can call &latex;, and a DVI-PS converter like dvips to create your &postscript; document. If your goal is a PDF document, you should run dvips with option and then call ps2pdf. You will find a lot of documents describing this solution. The &postscript; Way of &kile; &kile; helps you to get the bounding-box information. If you have installed &imagemagick; package, &kile; will extract this information from the EPS file and insert it as an option. This is done automatically when you select the graphics file. There are two advantages to proceed like this: The information is already scanned in the dialog, and need not to be done by &latex; later on. Even more important is that the width and height of the picture can be calculated, when the its resolution is known. This information will be shown near the top of the dialog, and may serve as a clue when you want to scale the graphics. &kile; can also support zipped or gzipped EPS files, which are much smaller than uncompressed EPS files. But, this feature can only be used with a special system setup and a change of your local graphics configuration, like it is described in the Bitmap Graphics section. The &postscript; Way and Bitmap Graphics If your systems allows shell-escape, &kile; also supports an easy way to include bitmap graphics, if you set up your &tex; system properly. There is no need to convert JPEG or PNG graphics, this can be done automatically when the DVI file is converted to PS. &latex; needs some information about the file suffixes. The package graphicx looks for a file graphics.cfg, which must be somewhere in your search path for &latex; documents. Search for entries like: \DeclareGraphicsRule{.pz}{eps}{.bb}{}% \DeclareGraphicsRule{.eps.Z}{eps}{.eps.bb}{}% \DeclareGraphicsRule{.ps.Z}{eps}{.ps.bb}{}% \DeclareGraphicsRule{.ps.gz}{eps}{.ps.bb}{}% \DeclareGraphicsRule{.eps.gz}{eps}{.eps.bb}{}% and replace these lines with: \DeclareGraphicsRule{.pz}{eps}{.bb}{}% \DeclareGraphicsRule{.eps.Z}{eps}{.eps.bb}{}% \DeclareGraphicsRule{.ps.Z}{eps}{.ps.bb}{}% \DeclareGraphicsRule{.ps.gz}{eps}{.ps.bb}{}% % changed or new graphic rules \DeclareGraphicsRule{.eps.zip}{eps}{.eps.bb}{`unzip -p #1}% zipped EPS \DeclareGraphicsRule{.eps.gz}{eps}{.eps.bb}{`gunzip -c #1}% gzipped EPS \DeclareGraphicsRule{.jpg}{eps}{}{`convert #1 eps:-}% JPEG \DeclareGraphicsRule{.gif}{eps}{.bb}{`convert #1 eps:-}% GIF \DeclareGraphicsRule{.png}{eps}{.bb}{`convert #1 eps:-}% PNG \DeclareGraphicsRule{.tif}{eps}{.bb}{`convert #1 eps:-}% TIFF \DeclareGraphicsRule{.pdf}{eps}{.bb}{`convert #1 eps:-}% PDF-graphics You will find this file, for example in Debian, at /etc/texmf/latex/graphics.cfg. The best way to proceed is to copy this file to your local texpath and then change this file. See the yours &tex; distribution manual to learn how to get a list of your &tex; folders. With this configuration file you are able to insert bitmap graphics and zipped or gzipped EPS files in &latex;. The command for conversion is given by dvips. When you look at the conversion command you will see that no extra file is created. The result of the conversion process is directly piped into the PS file. The only thing &latex; must know is the size of the graphics, and therefore we need the bounding box, which is provided by &kile;. Some say that this way is insecure; you have to decide on how to work. In any case, you need no bounding box, as &kile; will extract this information from all types of graphics. &pdflatex; and EPS Graphics As already stated, &pdflatex; is not able to handle EPS graphic files, but converters like epstopdf will help. The best way is to include package epstopdf, which must follow the graphicx package. \usepackage[pdftex]{graphicx} \usepackage{epstopdf} Now you can already include EPS graphics, if you run pdflatex with option , but we can make it even better and also handle zipped or gzipped EPS files. Again we have to change the graphics configuration file graphics.cfg like above. This time we search for: % pdfTeX is running in pdf mode \ExecuteOptions{pdftex}% and simply add some lines. % pdfTeX is running in pdf mode \ExecuteOptions{pdftex}% \AtEndOfPackage{% \g@addto@macro\Gin@extensions{.eps.gz,.eps.zip}% \@namedef{Gin@rule@.eps.gz}#1{{pdf}{.pdf}{`gunzip -c #1 | epstopdf -f >\Gin@base.pdf}}% \@namedef{Gin@rule@.eps.zip}#1{{pdf}{.pdf}{`unzip -p #1 | epstopdf -f >\Gin@base.pdf}}% }% With these lines, &pdflatex; is able to handle EPS files, and hopefully there should be no more issues concerning graphics. Master Document Defining your document as a master allows you to work with separated files, which gives you a parent document (or Master document), and child documents that make up a complete work. After having defined your Master document, with the corresponding command in the Settings menu, all the commands of the Tools menu will apply only to this document, even when you are working on the child documents. You can even close the Master document. Error Handling After you have compiled something, &kile; takes a look at the error messages that were generated. If there are any errors or warnings, they will be briefly reported in the Log and Messages window. One can take a closer look at the messages by selecting BuildView Log File, or by using the keyboard shortcut &Alt;0. The generated log is then displayed in the Log and Messages view; errors and warnings are highlighted. Viewing the log Viewing the log Viewing the log You can easily jump from one message in the log file to another by using the BuildNext / Previous LaTeX Error / Warning menu items, or by using the corresponding toolbar buttons. To jump to the line in the &latex; source where the error or warning occurred, click on the error or warning in the Log and Messages view. &kile; will take you automatically to the offending line. The Watch File Mode When you launch the Quickbuild command, a viewer of some sort will normally be called after the compilation. If you are not using an embedded viewer, a new window will be open every time. If you are adjusting the look of your document, you might launch Quickbuild very often, and have many viewer windows open on your desktop; to avoid this confusion, you can activate the Watch file mode, that will prevent Quickbuild from launching a viewer. Presently, &kdvi; supports continuous updating of the viewed DVI file, but &kghostview; is not as perfect: to update the document after compiling, you will have to change page, and the number of pages will not be changed in &kghostview;'s visualization. This mode is of course useless with the embedded viewers, as you have to close them anyway to get back to editing the document and recompiling. Navigating the &latex; Source Using the Structure View The Structure view shows the hierarchy of the document being created in &kile;, and allows you to quickly navigate it, showing its segmentation. To navigate around your document, all you need to do is to left click on any label, chapter, section, subsection, etc., and you will be taken to the beginning of the corresponding area. If you included a separate &latex; file in your source using the \input or \include tags, these files will be referred to in the Structure view; double-clicking on their names in it will make &kile; bring up the included file in the editor window. The hierarchy tree has also a separate branch for labels used in the text. Using the Structure View Using the Structure View Using the Structure View Updating the Structure View To update your structure view you can either go to EditRefresh Structure, hit F12, or you can save your document, which will make &kile; update its Structure view. Bookmarks Bookmarks are your reference to a segment of text or a line inside the &kile; environment. To use a bookmark, select a specific line of your document you would like to return to, then press &Ctrl; B, and &kile; will add a bookmark to this line. Alternatively, you can also set a bookmark by highlighting a line and choosing the menu labeled BookmarkToggle Bookmark. To remove all your bookmarks, select Bookmarks Clear Bookmarks. Please note that currently the bookmarks are not saved after exiting &kile;. Projects Working with Projects In &kile; you can create and work with projects. A project is a group of &latex;, graphic, &bibtex; or other files that contain all the information that is used to build your complete document. A typical project would be a document consisting of several chapters, written in different .tex files; all of them could be included in a project, to make the whole document easier to manage. The specifications of the project are stored in a special file, with extension .kilepr. A Project adds the following functionalities: You need not set a master document, &kile; does this automatically. Project files can easily be archived together by going to BuildOtherArchive The Files and Project view shows which files are included in the project. After opening a project, any file that was previously opened will be restored with the original encoding and highlightning. Code completion works across all project files. Reference completion works across all project files. Citation completion works across all project files. Search in all project files. Specify custom quickbuild and &makeidx; command. Creating a Project To create a project, select Project New Project.... You will be asked to give the following information to create your project: Title of your project. Name of the project file with .kilepr extension. Filename. Type of file creating: Empty Document, Article, Book, Letter, Report, .... When you fill out the filename box, you have to include a relative path from where the .kilepr project file is stored to the file. The File and Project View The File and Project view is a button of the sidebar menu. From this view, you can see the structure of your project, its files, and the name of the .kilepr file that stores the project information. Adding, removing, or changing options in your project is done via the File and Projects view. The File and Project View The File and Project View The File and Project View Adding and Removing Files To add a file to your project, open any &tex; file, right click on its name in the Files and Project view, and select Add to Project. If you have multiple projects open, a dialog box will ask you which project the file has to be added to. If you have multiple files to be added to a project, you can select the project from the Files and Project view and right-click then select Add Files; you will then be able to select your files in a dialog box. You can also right-click on the project's name in the Files and Project view, and select Add Files... to bring up a file selection dialog. Adding a file to a project Adding a file to a project Adding a file to a project To remove a file from a project, right-click on it and select Remove File. This does not delete your file (and also does not close it), but only removes it from the list of files contained in the .kilepr extension. Project Options &kile; has a few options related to your project that can be set. To change them, right-click on the title of your project and select Project Options, and you will have the option of changing: The title of your project. The Master document. The Quickbuild command. The &makeidx; options. Archiving your Project &kile; allows you to easily backup your project by storing all its files into a single archive (often known as tarball). To archive your project right-click on its name in the Files and Project view, or select ProjectArchive. By default, all files in a project are added to the archive. If you do not want to include a certain file in the archive, right-click on it in the Files and Project view, and uncheck the Include in Archive option. Archive commands are simple shell commands that are executed from the project folder (where the .kilepr file is located). Closing a Project To close a project, select the Files and Project view from the vertical toolbar, right click on your project title, and then select Close. This will close your project, all the files associated with your project, and will also add the name of the project you just closed to Open Recent Project... in the Project menu. Document Encoding The &kile; editor allows you to read, convert and set the text to the encoding your document needs. This allows you to use non-standard letters and symbols; you can use, for example, accented characters for Italian or French. Selecting the encoding for your document can be done in three ways: One way to set the encoding is to use the Set encoding combo box, located at the bottom of the Open File sidebar view. Another way is using the submenu SettingsConfigure Kile...Editor, where you can set the default character encoding for all files. Set the default character encoding Set the default character encoding A third way to set the encoding for a document is to set the option when you use the wizard to create a new document. &latex; itself understands only ASCII, a very limited set of characters, so you could not use accented or special letters directly. To use accented letters, a special syntax was created: such as for example \"e for ë. There is a package to help you with this, called inputenc, and is included in the preamble using \usepackage[latin1]{inputenc}, where the optional argument is the encoding you would like to use (nowadays in most cases utf8x). This tells &latex; to translate all of the ë's you wrote to \"e's before compiling. Please refer to the inputenc documents directly for more information on inputenc. Last but not least: remember to make sure that your file is actually encoded in the same encoding you told inputenc! Choosing the source file's encoding Choosing the source file's encoding Choosing the source file's encoding This host of different character coding tables has been creating problems on many applications: for example, you cannot write a course of Turkish in French without losing one language's special characters. There is general agreement that, sooner or later, everybody will switch to Unicode. There are many implementations of Unicode, and UTF-8 is the most successful in Linux; Windows® relies instead on the more cumbersome and less flexible UCS-2. Some distributions, as RedHat, have already begun setting their default encoding to UTF-8, and therefore you may be very interested in using of the utf8x argument to the inputenc package. The &ucs; Package If you don't have the &ucs; package installed, you can proceed as follows: Get the &ucs; package from the home page of Unicode support for &latex;, by Dominique Unruh from the University of Karlsruhe. To install it, unpack the downloaded file and place it in a directory listed in your $TEXINPUTS envirnoment variable. This can also be set inside kile. \usepackage{ucs} \usepackage[utf8x]{inputenc} &cjk; Support Adding support for ideographic languages is quite tricky. However, once you are done with it, it will work quite well. Other than installing packages, there is some extra configuration work to do. Your Linux distribution might already have a &cjk; (Chinese, Japanese, Korean) package ready for you, so you might be saved the hassle of manually installing everything. Do check before going forward! There is the possibility of using the &ucs; package in order to write short snippets of &cjk; text, but that option is seriously limited as it does not handle, among other things, newlines. We will instead install the complete &cjk;-&latex; package and make it work for both &latex; and &pdflatex;. A lot of this material has been inspired by Pai H. Chou's page about how to setup &pdflatex;. Download the &cjk; package. Copy its unpacked files to an appropriate subfolder of $TEXMF, just like you did with the &ucs; package before (see ). The files will be unpacked in a CJK/X_Y.Z folder, it is not important that you take them out, though it will probably be tidier for you to maintain. Now you have to download a font that supports all the &cjk; characters you need. You can choose any *.ttf file that covers them, but in this walkthrough we will use Cyberbit. Unzip the file and rename Cyberbit.ttf to cyberbit.ttf, since uppercase might confuse your system. Place cyberbit.ttf in a folder together with Unicode.sfd, and generate the *.tfm and *.enc files with the command $ ttf2tfm cyberbit.ttf -w cyberbit@Unicode@. For some reasons, sometimes this does not produce the hundreds of files it should. Should that be your case, you can download both *.tfm and *.enc files. Place the *.tfm files in an appropriate folder, say $TEXMF/fonts/tfm/bitstream/cyberbit/; the *.enc files may be installed in $TEXMF/pdftex/enc/cyberbit/. Now we need a map file to connect the *.enc files to the font. Download cyberbit.map and install it in $TEXMF/pdftex/config/. Download another file, c70cyberbit.fd, and place it in an appropriate folder. You may choose, for example, $TEXMF/tex/misc/. The last file we have to generate is a &postscript; Type 1 font, necessary to read DVI files generated with &latex;. Run the command $ ttf2pfb cyberbit.ttf -o cyberbit.pfb, and copy the resulting cyberbit.pfb in a folder like $TEXMF/fonts/type1/cyberbit/. Let's now place cyberbit.ttf among the fonts where &latex; can find it. You could place it in a folder named $TEXMF/fonts/truetype/. Check the configuration file you find at $TEXMF/web2c/texmf.cnf, and make sure that the line mentioning TTFONTS is uncommented and points to the folder where you saved cyberbit.ttf. To make it possible for &pdflatex; to use your &cjk; fonts, it is necessary that you add a line in configuration file $TEXMF/pdftex/config/pdftex.cfg. Add map +cyberbit.map in the file to complete the configuration for &pdflatex;. To configure &latex; so that you can produce DVI files with &cjk; characters, you have to add a line in file ttfonts.map. The file might be in a folder named $TEXMF/ttf2pk/, but you will probably have to look for it. Add the line cyberbit@Unicode@ cyberbit.ttf into it. Now, you only have to run texhash and the system should be ready. To test whether your configuration is correct, you can try to compile this test file. &cjk; Troubleshooting There are many things that can go wrong when setting &cjk; support manually. If something seems not to work, the following checklist might help you. Obviously, since you run &latex; as a user and not as root, you must allow ordinary users to access the new files. Make sure all folders and files are accessible using the chmod command. If &latex; writes a DVI without problems, but you cannot view it, it is almost certainly because of some problems in the automatic generation of *.pk fonts. They are supposed to be generated on the fly when viewing a DVI file, but this might fail for a number of reasons: double-check ttfonts.map for your custom line first. However, it might happen that your ttf2pk command, which is usually invoked by the DVI viewer, has been compiled without support for the kpathsea libraries. If this is the case, ttf2pk will make no mention of kpathsea. As support for these libraries is necessary, you might have to find a new package, or recompile FreeType 1 by yourself. How do I input &cjk; in Unicode? There are a number of different input engines, and the choice can depend also on personal preference. The author uses Skim, a port to &kde; of the Scim engine. Refer to your distribution's documentation to learn how to install these programs. Configuration of such programs can be tricky too, in the case of Skim you will have to define an environment variable XMODIFIERS="@im=SCIM" before starting X. Scripting Scripting in &kile; &kile;'s scripting feature allows for the execution of ECMAScript code. Scripts can be managed through the scripting panel in the sidebar. API Reference In this section we describe &kile;'s scripting programming interface. Please note that the scripting API has not been finalized yet. The API described below might change in future versions of &kile;. First of all, &kile;'s script execution environment provides a global object called "kile", which owns the following methods: (kile).currentTextDocument() Returns a KileTextDocument object which reflects the currently active text document. Returns null if no text document is active. (kile).getInputValue(caption, label) Opens a dialog with the given caption and label. Returns the value that user has entered. Objects of the type KileTextDocument represent text documents in &kile;. They have the following properties: (KileTextDocument).backspace() Deletes the character that is located immediately before the current cursor position and moves the cursor one position backward in the text. (KileTextDocument).cursorLeft() Moves the cursor one position backward in the text. (KileTextDocument).cursorRight() Moves the cursor one position forward in the text. (KileTextDocument).insertText(text) Inserts the text contained in the variable text into the document at the current cursor location. (KileTextDocument).insertBullet() Inserts a bullet into the document at the current cursor position. (KileTextDocument).nextBullet() Selects the first bullet located in the document immediately after the current cursor location. (KileTextDocument).previousBullet() Selects the first bullet located in the document immediately before the current cursor location. (KileTextDocument).up() Moves the cursor one line up in the document. (KileTextDocument).down() Moves the cursor one line down in the document. (KileTextDocument).cursorLine() Returns the line which the cursor is currently located at. (KileTextDocument).cursorColumn() Returns the column which the cursor is currently located at. (KileTextDocument).setCursorLine(line) Moves the cursor to the line denoted by line. (KileTextDocument).setCursorColumn(column) Moves the cursor to the column denoted by line. Help Help Documents &latex; is a rather sophisticated system, where the basic features can be expanded by a great variety of additional packages. &kile; provides a lot of different help to support the user. LaTeX Reference An alphabetical index of the most common &latex; commands. TeX Documentation &tetex;/&texlive; comes with a huge amount of documents. This includes a documentation for all included packages and an additional &latex; reference. LaTeX A full reference for &tex; and friends. This is not only a description of all programs, some important packages are also mentioned. And it includes a full reference manual of &latex; commands—ideal for looking up a particular piece of formatting while writing a document. As this document is really extensive, &kile; separates it with three important bookmarks. LaTeX Command Another alphabetical index of the most common &latex; commands. LaTeX Subject A description of important &latex; subjects. LaTeX Env An alphabetical index of the most common &latex; environments. Context Sensitive Help &kile; also support a context sensitive help, which is called with &Ctrl;&Alt;H,K. In SettingsConfigure Kile... KileHelp you can choose whether you want to use &kile;'s &latex; reference or the help system of &tetex;/&texlive;, which is the default setting. Bullets Bullets Searching for Keywords It is not always easy to find the right document, as &tetex;/&texlive; comes with a huge amount of documents. As one possible help, &tetex;/&texlive; provides a tiny program texdoctk. It comes with a database of all documents that &kile; uses to offer an interface to it. Bullets Bullets All documents are grouped into some categories, and the main advantage is that you can search for packages names or keywords. &kile; will then show only the results. Bullets Bullets A mouse double click or the Space key will start the viewer for this document. This can be a arbitrary document, not only a DVI, PS, PDF or HTML document. &kile; will take &konqueror; settings to start a appropriate viewer. User Defined Help Beside this static &tetex;/&texlive; documentation, &kile; supports also another variable way for user-help documents. In Help menu &kile; has a special User help submenu, where the user can add documents of his own choice. These can be the most important documents of &tetex;/&texlive; documentation, or even self written documents. It is even possible to choose some Web URLs. Go to SettingsConfigure Kile... KileHelp and choose Configure button to configure this User help menu. You can add, remove or navigate menu entries, and also insert separators to get a better structure. Pressing the Add button will open another dialog, where you must edit the name of the menu entry, and choose the corresponding file or Web &url;. If you choose a Web &url;, &konqueror; is started and you should copy the final &url;. Bullets Bullets Credits and License &kile; is an open-source user-friendly &latex; / &tex; source code editor. It will run on systems with the &kde; Desktop Environment installed. &kde; is available for several architectures with Linux and other Unix-like systems installed. &kile; is also part of the Fink project, which means you can run &kile; on a Mac with OS-X. Many thanks are owed to those who strive to continue the &kile; project, and the many hours of contributions made by those who sacrifice their time to develop tools we can all use under the GNU license. Up-to-date information about contributors can be found in the About &kile; dialog from the Help menu. Contributions among others from: Rob Lensen, Roland Schulz, Michael Margraf, Holger Danielsson Many thanks to all those involved! &underFDL; &underGPL; &documentation.index;