/*
 * Kivio - Visual Modelling and Flowcharting
 * Copyright (C) 2000-2001 theKompany.com & Dave Marotti
 * Copyright (C) 2003-2005 Peter Simonsson <psn@linux.se>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 */
#include "tool_connector.h"

#include <tqcursor.h>
#include <kdebug.h>
#include <kiconloader.h>
#include <kstandarddirs.h>
#include <KoPoint.h>
#include <KoZoomHandler.h>
#include <klocale.h>
#include <KoGuides.h>

#include "kivio_view.h"
#include "kivio_canvas.h"
#include "kivio_page.h"
#include "kivio_doc.h"
#include "kivio_factory.h"

#include "kivio_stencil_spawner_set.h"
#include "kivio_stencil_spawner.h"
#include "kivio_custom_drag_data.h"
#include "kivio_layer.h"
#include "kivio_point.h"
#include "kivio_stencil.h"
#include "straight_connector.h"
#include "kivio_pluginmanager.h"
#include "kivio_1d_stencil.h"
#include "kiviopolylineconnector.h"
#include "polylineconnectorspawner.h"
#include "mousetoolaction.h"

ConnectorTool::ConnectorTool( KivioView* tqparent ) : Kivio::MouseTool(tqparent, "Connector Mouse Tool")
{
  m_connectorAction = new Kivio::MouseToolAction(i18n("Straight Connector"), "kivio_connector", 0,
    actionCollection(), "connector");
  connect(m_connectorAction, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(setActivated(bool)));
  connect(m_connectorAction, TQT_SIGNAL(activated()), this, TQT_SLOT(activateStraight()));
  connect(m_connectorAction, TQT_SIGNAL(doubleClicked()), this, TQT_SLOT(makePermanent()));
  m_connectorAction->setExclusiveGroup("ConnectorTool");

  m_polyLineAction = new Kivio::MouseToolAction(i18n("Polyline Connector"), "kivio_connector", 0,
    actionCollection(), "polyLineConnector");
  connect(m_polyLineAction, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(setActivated(bool)));
  connect(m_polyLineAction, TQT_SIGNAL(activated()), this, TQT_SLOT(activatePolyline()));
  connect(m_connectorAction, TQT_SIGNAL(doubleClicked()), this, TQT_SLOT(makePermanent()));
  m_polyLineAction->setExclusiveGroup("ConnectorTool");

  m_permanent = false;

  m_type = StraightConnector;
  m_mode = stmNone;
  m_pDragData = 0;

  m_pConnectorCursor1 = new TQCursor(BarIcon("kivio_connector_cursor1",KivioFactory::global()),2,2);
  m_pConnectorCursor2 = new TQCursor(BarIcon("kivio_connector_cursor2",KivioFactory::global()),2,2);
}

ConnectorTool::~ConnectorTool()
{
  delete m_pConnectorCursor1;
  delete m_pConnectorCursor2;
  delete m_pDragData;
  m_pDragData = 0;
}


/**
 * Event delegation
 *
 * @param e The event to be identified and processed
 *
 */
bool ConnectorTool::processEvent(TQEvent* e)
{
  switch (e->type())
  {
  case TQEvent::MouseButtonPress:
    mousePress( TQT_TQMOUSEEVENT(e) );
    return true;
    break;

  case TQEvent::MouseButtonRelease:
    mouseRelease( TQT_TQMOUSEEVENT(e) );
    return true;
    break;

  case TQEvent::MouseMove:
    mouseMove( TQT_TQMOUSEEVENT(e) );
    return true;
    break;

  default:
    break;
  }

  return false;
}

void ConnectorTool::setActivated(bool a)
{
  if(a) {
    view()->canvasWidget()->setCursor(*m_pConnectorCursor1);
    m_mode = stmNone;
    m_pStencil = 0;
    m_pDragData = 0;
    view()->canvasWidget()->setShowConnectorTargets(true);
    view()->canvasWidget()->tqrepaint();
    emit activated(this);
  } else {
    if(m_pStencil && (m_mode == stmDrawRubber) && (m_type == PolyLineConnector)) {
      Kivio::PolyLineConnector* polyconnector = static_cast<Kivio::PolyLineConnector*>(m_pStencil);
      polyconnector->removeLastPoint();

      if(polyconnector->pointCount() > 1) {
        connector(view()->canvasWidget()->rect());
      } else {
        view()->activePage()->unselectStencil(polyconnector);
        view()->activePage()->curLayer()->takeStencil(polyconnector);
        delete polyconnector;
        polyconnector = 0;
      }

      view()->canvasWidget()->guideLines().repaintAfterSnapping();
    }

    m_pStencil = 0;
    delete m_pDragData;
    m_pDragData = 0;
    m_type = StraightConnector;
    m_connectorAction->setChecked(false);
    m_polyLineAction->setChecked(false);
    m_permanent = false;
    view()->setStatusBarInfo("");
    view()->canvasWidget()->setShowConnectorTargets(false);
    view()->canvasWidget()->tqrepaint();
  }
}

void ConnectorTool::connector(TQRect)
{
  if (!m_pStencil)
    return;

  delete m_pDragData;
  m_pDragData = 0;

  KivioDoc* doc = view()->doc();
  KivioPage* page = view()->activePage();

  m_pStencil->searchForConnections(page, view()->zoomHandler()->unzoomItY(4));
  doc->updateView(page);
}

void ConnectorTool::mousePress( TQMouseEvent *e )
{
  if(e->button() == Qt::LeftButton) {
    bool ok = true;
    if(!m_pStencil || (m_type == StraightConnector)) {
      ok = startRubberBanding(e);
    } else {
      if(m_pStencil) {
        Kivio::PolyLineConnector* connector = static_cast<Kivio::PolyLineConnector*>(m_pStencil);
        KivioCanvas* canvas = view()->canvasWidget();
        KivioPage* pPage = canvas->activePage();
        bool hit = false;
        KoPoint point = pPage->snapToTarget(canvas->mapFromScreen(e->pos()), 8.0, hit);
      
        if(!hit) {
          point = canvas->snapToGrid(startPoint);
        }
        
        if((m_mode == stmDrawRubber) && hit) {
          endRubberBanding(e);
        } else {
          connector->addPoint(point);
        }
      }
    }
    
    if(ok) {
      m_mode = stmDrawRubber;
    } else {
      m_mode = stmNone;
    }
  } else if(e->button() == Qt::RightButton) {
    if(m_type == PolyLineConnector) {
      if(m_mode == stmDrawRubber) {
        endRubberBanding(e);
      }
      
      view()->canvasWidget()->setCursor(*m_pConnectorCursor1);
      m_mode = stmNone;
    }
  }
}


/**
 * Tests if we should start rubber banding (always returns true).
 */
bool ConnectorTool::startRubberBanding( TQMouseEvent *e )
{
  KivioCanvas* canvas = view()->canvasWidget();
  KivioDoc* doc = view()->doc();
  KivioPage* pPage = canvas->activePage();
  TQString spawnerId;
  
  if(m_type == StraightConnector) {
    spawnerId = "Dave Marotti - Straight Connector";
  } else {
    spawnerId = "Internal - PolyLine Connector";
  }

  KivioStencilSpawner* ss = doc->findInternalStencilSpawner(spawnerId);
    
  if(!ss) {
    kdDebug(43000) << "ConnectorTool: Failed to find StencilSpawner!" << endl;
    return false;
  }
    
    // Create the stencil
  m_pStencil = static_cast<Kivio1DStencil*>(ss->newStencil());
  
  bool hit = false;
  startPoint = pPage->snapToTarget(canvas->mapFromScreen(e->pos()), 8.0, hit);

  if(!hit) {
    startPoint = canvas->snapToGrid(startPoint);
  }

  
  if(!m_pStencil) {
    return false;
  }
  
  m_pStencil->setTextFont(doc->defaultFont());

  // Unselect everything, add the stencil to the page, and select it
  pPage->unselectAllStencils();
  pPage->addStencil(m_pStencil);
  pPage->selectStencil(m_pStencil);
  // Get drag info ready
  m_pDragData = new KivioCustomDragData();
  m_pDragData->page = pPage;
  m_pDragData->x = startPoint.x();
  m_pDragData->y = startPoint.y();

  if(m_type == StraightConnector) {
    KivioStraightConnector* connector = static_cast<KivioStraightConnector*>(m_pStencil);
    m_pDragData->id = kctCustom + 2;
  
    connector->setStartPoint(startPoint.x(), startPoint.y());
    connector->setEndPoint(startPoint.x() + 10.0, startPoint.y() + 10.0);
  } else {
    Kivio::PolyLineConnector* connector = static_cast<Kivio::PolyLineConnector*>(m_pStencil);
    m_pDragData->id = kctCustom + 1;
    connector->addPoint(startPoint);
    connector->addPoint(startPoint);
  }

  m_pStencil->customDrag(m_pDragData);

  canvas->tqrepaint();
  canvas->setCursor(*m_pConnectorCursor2);
  return true;
}

void ConnectorTool::mouseMove( TQMouseEvent * e )
{
  switch( m_mode )
  {
    case stmDrawRubber:
      continueRubberBanding(e);
      break;

    default:
      break;
  }
}

void ConnectorTool::continueRubberBanding( TQMouseEvent *e )
{
  KivioCanvas* canvas = view()->canvasWidget();
  KivioPage* pPage = view()->activePage();
  bool hit = false;
  KoPoint endPoint = pPage->snapToTarget(canvas->mapFromScreen(e->pos()), 8.0, hit);

  if(!hit) {
    endPoint = canvas->snapToGridAndGuides(endPoint);
  }

  m_pDragData->x = endPoint.x();
  m_pDragData->y = endPoint.y();
  
  if(m_type == StraightConnector) {
    KivioStraightConnector* connector = static_cast<KivioStraightConnector*>(m_pStencil);
    connector->setEndPoint(endPoint.x(), endPoint.y());
  
    m_pDragData->id = kctCustom + 2;
  } else {
    Kivio::PolyLineConnector* connector = static_cast<Kivio::PolyLineConnector*>(m_pStencil);
    m_pDragData->id = kctCustom + connector->pointCount();
  }

  m_pStencil->customDrag(m_pDragData);
  m_pStencil->updateGeometry();
  canvas->tqrepaint();
}

void ConnectorTool::mouseRelease( TQMouseEvent *e )
{
  if(m_type == StraightConnector) {
    switch( m_mode )
    {
      case stmDrawRubber:
        endRubberBanding(e);
        break;
    }

    view()->canvasWidget()->setCursor(*m_pConnectorCursor1);
    m_mode = stmNone;
  }
}

void ConnectorTool::endRubberBanding(TQMouseEvent *)
{
  connector(view()->canvasWidget()->rect());
  m_pStencil = 0;
  m_mode = stmNone;
  view()->canvasWidget()->guideLines().repaintAfterSnapping();

  if(!m_permanent) {
    view()->pluginManager()->activateDefaultTool();
  }
}

void ConnectorTool::activateStraight()
{
  m_type = StraightConnector;
  m_connectorAction->setChecked(true);
  m_polyLineAction->setChecked(false);
}

void ConnectorTool::activatePolyline()
{
  m_type = PolyLineConnector;
  m_connectorAction->setChecked(false);
  m_polyLineAction->setChecked(true);
  view()->setStatusBarInfo(i18n("Left mouse button to start drawing, right to end drawing."));
}

void ConnectorTool::makePermanent()
{
  m_permanent = true;
}

#include "tool_connector.moc"