# translation of libkdcraw.po to Slovak # # Richard Fric , 2007. msgid "" msgstr "" "Project-Id-Version: libkdcraw\n" "POT-Creation-Date: 2008-09-15 08:37+0200\n" "PO-Revision-Date: 2007-02-19 19:15+0100\n" "Last-Translator: Richard Fric \n" "Language-Team: Slovak \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" #: libkdcraw/rcombobox.cpp:73 libkdcraw/rnuminput.cpp:74 #: libkdcraw/rnuminput.cpp:172 msgid "Reset to default value" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:183 msgid "16 bits color depth" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:184 msgid "" "

If enabled, all RAW files will be decoded in 16-bit color depth using a " "linear gamma curve. To prevent dark picture rendering in the editor, it is " "recommended to use Color Management in this mode." "

If disabled, all RAW files will be decoded in 8-bit color depth with a " "BT.709 gamma curve and a 99th-percentile white point. This mode is faster than " "16-bit decoding." msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:203 msgid "Interpolate RGB as four colors" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:204 msgid "" "

Interpolate RGB as four colors" "

The default is to assume that all green pixels are the same. If even-row " "green pixels are more sensitive to ultraviolet light than odd-row this " "difference causes a mesh pattern in the output; using this option solves this " "problem with minimal loss of detail." "

To resume, this option blurs the image a little, but it eliminates false 2x2 " "mesh patterns with VNG quality method or mazes with AHD quality method." msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:217 #, c-format msgid "libraw %1" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:220 msgid "Visit dcraw project website" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:224 msgid "Do not stretch or rotate pixels" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:225 msgid "" "

Do not stretch or rotate pixels" "

For Fuji Super CCD cameras, show the image tilted 45 degrees. For cameras " "with non-square pixels, do not stretch the image to its correct aspect ratio. " "In any case, this option guarantees that each output pixel corresponds to one " "RAW pixel." "

" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:235 msgid "Quality:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:237 msgid "Bilinear" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:238 msgid "VNG" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:239 msgid "PPG" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:240 msgid "AHD" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:242 msgid "" "

Quality (interpolation)" "

Select here the demosaicing RAW images decoding interpolation method. A " "demosaicing algorithm is a digital image process used to interpolate a complete " "image from the partial raw data received from the color-filtered image sensor " "internal to many digital cameras in form of a matrix of colored pixels. Also " "known as CFA interpolation or color reconstruction, another common spelling is " "demosaicing. There are 4 methods to demosaicing RAW images:" "

Bilinear: use high-speed but low-quality bilinear interpolation " "(default - for slow computer). In this method, the red value of a non-red pixel " "is computed as the average of the adjacent red pixels, and similar for blue and " "green." "

VNG: use Variable Number of Gradients interpolation. This method " "computes gradients near the pixel of interest and uses the lower gradients " "(representing smoother and more similar parts of the image) to make an " "estimate." "

PPG: use Patterned Pixel Grouping interpolation. Pixel Grouping uses " "assumptions about natural scenery in making estimates. It has fewer color " "artifacts on natural images than the Variable Number of Gradients method." "

AHD: use Adaptive Homogeneity-Directed interpolation. This method " "selects the direction of interpolation so as to maximize a homogeneity metric, " "thus typically minimizing color artifacts." "

" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:272 msgid "Filter:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:273 msgid "" "

Median Filter" "

Set here the passes used by median filter applied after interpolation to " "Red-Green and Blue-Green channels." msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:282 msgid "Demosaicing" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:290 msgid "Method:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:292 msgid "Default D65" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:293 msgid "Camera" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:294 msgid "Automatic" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:295 msgid "Manual" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:297 msgid "" "

White Balance Method" "

Configure the raw white balance :" "

Default D65: Use a standard daylight D65 white balance (dcraw " "defaults)" "

Camera: Use the white balance specified by the camera. If not " "available, reverts to default neutral white balance" "

Automatic: Calculates an automatic white balance averaging the entire " "image" "

Manual: Set a custom temperature and green level values" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:309 msgid "T(K):" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:310 msgid "

Temperature

Set here the color temperature in Kelvin." msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:317 msgid "Green:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:318 msgid "" "

Set here the green component to set magenta color cast removal level." msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:321 msgid "Highlights:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:323 msgid "Solid white" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:324 msgid "Unclip" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:325 msgid "Blend" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:326 msgid "Rebuild" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:328 msgid "" "

Highlights" "

Select here the highlight clipping method:" "

Solid white: clip all highlights to solid white" "

Unclip: leave highlights unclipped in various shades of pink" "

Blend:Blend clipped and unclipped values together for a gradual fade " "to white" "

Rebuild: reconstruct highlights using a level value" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:337 msgid "Level:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:341 msgid "" "

Level" "

Specify the reconstruct highlight level. Low values favor whites and high " "values favor colors." msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:345 msgid "Brightness:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:350 msgid "" "

Brighness" "

Specify the brightness level of output image.The default value is 1.0 (works " "in 8-bit mode only)." "

" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:360 msgid "Black:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:361 msgid "" "

Black point" "

Use a specific black point value to decode RAW pictures. If you set this " "option to off, the Black Point value will be automatically computed." "

" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:368 msgid "" "

Black point value" "

Specify specific black point value of the output image." "

" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:371 msgid "White:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:372 msgid "" "

White point" "

Use a specific white point value to decode RAW pictures. If you set this " "option to off, the White Point value will be automatically computed." "

" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:379 msgid "" "

White point value" "

Specify specific white point value of the output image." "

" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:409 msgid "White Balance" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:417 msgid "Enable noise reduction" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:418 msgid "" "

Enable Noise Reduction" "

Use wavelets to erase noise while preserving real detail." "

" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:424 msgid "Threshold:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:425 msgid "" "

Threshold" "

Set here the noise reduction threshold value to use." msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:428 msgid "Enable Chromatic Aberration correction" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:429 msgid "" "

Enable Chromatic Aberration correction" "

Enlarge the raw red and blue layers by the given factors, typically 0.999 to " "1.001, to correct chromatic aberration." "

" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:433 msgid "Red:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:438 msgid "" "

Red multiplier" "

Set here the magnification factor of the red layer" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:441 msgid "Blue:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:446 msgid "" "

Blue multiplier" "

Set here the magnification factor of the blue layer" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:461 msgid "Corrections" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:469 msgid "Camera Profile:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:471 msgid "None" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:472 msgid "Embedded" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:473 libkdcraw/dcrawsettingswidget.cpp:492 msgid "Custom" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:475 msgid "" "

Camera Profile" "

Select here the input color space used to decode RAW data." "

None: no input color profile is used during RAW decoding." "

Embedded: use embedded color profile from RAW file if exist." "

Custom: use a custom input color space profile." msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:483 libkdcraw/dcrawsettingswidget.cpp:513 msgid "ICC Files (*.icc; *.icm)" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:485 msgid "Workspace:" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:487 msgid "Raw (linear)" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:488 msgid "sRGB" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:489 msgid "Adobe RGB" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:490 msgid "Wide Gamut" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:491 msgid "Pro-Photo" msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:494 msgid "" "

Workspace" "

Select here the output color space used to decode RAW data." "

Raw (linear): in this mode, no output color space is used during RAW " "decoding." "

sRGB: this is a RGB color space, created cooperatively by " "Hewlett-Packard and Microsoft. It is the best choice for images destined for " "the Web and portrait photography." "

Adobe RGB: this color space is an extended RGB color space, developed " "by Adobe. It is used for photography applications such as advertising and fine " "art." "

Wide Gamut: this color space is an expanded version of the Adobe RGB " "color space." "

Pro-Photo: this color space is an RGB color space, developed by " "Kodak, that offers an especially large gamut designed for use with photographic " "outputs in mind." "

Custom: use a custom output color space profile." msgstr "" #: libkdcraw/dcrawsettingswidget.cpp:525 msgid "Color Management" msgstr ""