You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
libtdevnc/x11vnc/tkx11vnc

2622 lines
56 KiB

#!/bin/sh
# the next line restarts using wish. \
exec wish "$0" "$@"
catch {rename send {}}
#
# Copyright (c) 2004 Karl J. Runge <runge@karlrunge.com>
# All rights reserved.
#
# This is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This software is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this software; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
# USA.
#
# tkx11vnc v0.1
# This is a simple frontend to x11vnc. It uses the remote control
# and query features (-remote/-query aka -R/-Q) to interact with it.
# It is just a quick-n-dirty hack (it parses -help output, etc), but
# it could be of use playing with or learning about the (way too) many
# parameters x11vnc has.
#
# It can be used to interact with a running x11vnc (see the x11vnc
# -gui option), or to set the parameters and then start up x11vnc.
#
#
# Below is a simple picture of how the gui should be laid out and how
# the menus should be organized. Most menu items correspond to remote
# control commands. A trailing ":" after the item name means it is a string
# to be set rather than a boolean that can be toggled (e.g. the entry
# box must be used).
#
# Some tweak options may be set in the prefix "=" string.
# A means it is an "Action" (not a true variable)
# R means it is an action only valid in remote mode.
# S means it is an action only valid in startup mode.
# Q means it is an action worth querying after running.
# D means it is a good idea to delay a little before querying
# (i.e. perhaps it causes x11vnc to do a lot of work, new fb)
# No longer used, -sync is used instead.
# P means the string can be +/- appended/deleted (string may not
# be the same after the remote command)
# G means gui internal item
# F means can be set via file browse
# -C:val1,... means it will be a checkbox (radio button)
# the "-" means no other options follow
# 0 means to skip the item.
# -- means add a separator
#
proc set_template {} {
global template
set template "
Row: Actions Clients Permissions Keyboard Pointer Help
Row: Displays Screen Tuning Debugging Misc
Actions
=SA start
=RA stop
=GA attach
=RA detach
--
=RA ping
=RA update-all
=GA clear-all
--
=RA stop+quit
=GA Quit
Help
=GA gui
=GA all
Clients
=RQA current:
=F connect:
=RQA disconnect:
--
accept:
gone:
vncconnect
--
http
=F httpdir:
httpport:
enablehttpproxy
Displays
display:
=F auth:
desktop:
rfbport:
=0 gui:
Screen
=DRA refresh
=DRA reset
=DRA blacken
--
=D id:
=D sid:
=D scale:
--
=D overlay
overlay_nocursor
--
=D visual:
flashcmap
notruecolor
--
=DP blackout:
=D xinerama
--
solid
solid_color:
--
= xrandr
=-C:resize,newfbsize,exit xrandr_mode:
padgeom:
Keyboard
norepeat
add_keysyms
skip_keycodes:
modtweak
xkb
--
=FP remap:
--
clear_mods
clear_keys
Pointer
=-C:none,arrow,X,some,most cursor:
noxfixes
noalphablend
--
cursorpos
nocursorshape
--
buttonmap:
--
xwarppointer
Misc
=F rc:
norc
--
nofb
--
nobell
nosel
noprimary
--
bg
=-C:ignore,exit sigpipe:
=0 inetd
rfbwait:
--
=RA remote-cmd:
=GA all-settings
Debugging
debug_pointer
debug_keyboard
=F logfile:
=GA show-logfile
=GA tail-logfile
quiet
--
=GA show-start-cmd
=G debug_gui
Permissions
=RQA lock
=RQA unlock
=SQA deny_all
--
=FP allow:
localhost
=RA allowonce:
--
=RA noremote
--
viewonly
shared
forever
timeout:
--
=SA alwaysshared
=SA nevershared
=SA dontdisconnect
--
viewpasswd:
=F passwdfile:
=0 storepasswd
=F rfbauth:
passwd:
--
safer
unsafe
Tuning
=-C:0,1,2,3,4 pointer_mode:
input_skip:
nodragging
--
=D noshm
flipbyteorder
onetile
--
alphacut:
alphafrac:
alpharemove
--
speeds:
wait:
defer:
nap
screen_blank:
--
fs:
gaps:
grow:
fuzz:
snapfb
--
threads
--
progressive:
"
}
proc set_internal_help {} {
global helptext helpall
# set some internal item help here:
set helptext(start) "
Launch x11vnc with the settings you have prescribed in the gui.
The x11vnc process is started in an xterm window so you can see the
output, kill it, etc.
"
set helptext(show-start-cmd) "
Displays in the text area what the x11vnc start command (i.e. the command
run by \"Actions -> start\") looks like for the current values of the
settings. This can be done even in the attached state. Intended for
debugging the gui. The help item for \"Actions -> start\" gives the
same info.
"
set helptext(debug_gui) "
Set debug_gui to get more output printed in the text area.
"
set helptext(detach) "
No longer be associated with the x11vnc server. Switch to non-connected
state.
"
set helptext(attach) "
Attach to the x11vnc server, if possible. Switches to connected state
if successful. To change or set the X display use \"Displays -> display\"
"
set helptext(ping) "
Check if x11vnc still responds to \"ping\" remote command.
"
set helptext(update-all) "
Query the x11vnc server for the current values of all variables.
Populate the values into the gui's database.
"
set helptext(clear-all) "
Forget any variable settings either entered in by you or retrieved
from a running x11vnc server. Basically sets everything to 0 or
the string (unset).
"
set helptext(all-settings) "
Displays the gui's database of all of the x11vnc server's current
settings. Use \"Actions -> update-all\" or \"Control+R\" to
refresh this list if it ever gets out of sync.
"
set helptext(remote-cmd) "
Run a remote command (-R) or query (-Q) directly. Only a few
remote commands are not on a menu, but for those few you can
run the command directly this way. Just enter the command into
the Entry box when prompted. Use the prefix \"Q:\" to indicate
a -Q query. Examples: \"zero:20,20,100,100\", \"Q:ext_xfixes\"
"
set helptext(stop+quit) "
Send the stop command to the x11vnc server, then terminate the tkx11vnc gui.
"
set helptext(show-logfile) "
View the current contents of the logfile (if it exists and is accessible
by the gui process).
"
set helptext(tail-logfile) "
Run the tail(1) command with -f option on the logfile in an xterm.
"
set helptext(Quit) "
Terminate the tkx11vnc gui. Any x11vnc servers will be left running.
"
set helptext(current) "
Shows a menu of currently connected VNC clients on the x11vnc server.
Allows you to find more information about them or disconnect them.
You will be prompted to confirm any disconnections.
"
set helptext(solid_color) "
Set the -solid color value.
"
set helptext(xrandr_mode) "
Set the -xrandr mode value.
"
set helptext(all) $helpall
set helptext(gui) "
tkx11vnc is a simple frontend to x11vnc. Nothing fancy, it merely
provides an interface to each of the many x11vnc command line options and
remote control commands. See \"Help -> all\" for much info about x11vnc.
Most menu items have a (?) button one can click on to get more information
about the option or command.
There are two states tkx11vnc can be in:
1) Available to control a running x11vnc process.
2) Getting ready to start a x11vnc process.
In state 1) the Menu items available in the menus are those that
correspond to the x11vnc \"remote control\" commands. See the -remote
entry under \"Help -> all\" for a complete list. Also available is
the \"Actions -> stop\" item to shut down the running x11vnc server,
thereby changing to state 2). One could also simply \"Actions -> detach\"
leaving the x11vnc server running. \"Actions -> attach\" would
reestablish the connection.
In state 2) the Menu items available in the menus (Actions, Clients,
etc.) are those that correspond to command line options used in starting
an x11vnc process, and the \"Actions -> start\" item executes
x11vnc thereby changing to state 1). To see what x11vnc startup command
you have built so far, look at the (?) help for \"Actions -> start\"
and it will show you what the command looks like.
There is much overlap between the menu items available in state 1)
and state 2), but it is worth keeping in mind it is not 100%.
For example, you cannot set passwords or password files in state 1).
Also note that there may be *two* separate X displays involved, not just
one: 1) the X display x11vnc will be polling (and making available to
VNC viewers), and 2) the X display this GUI is intended to display on.
For example, one might use ssh to access the remote machine where the
GUI would display on :11 and x11vnc would poll display :0. By default
the gui will display on the value in the DISPLAY env. variable followed
by the value from the -display option. To override this, use something
like: \"-gui otherhost:0\", etc.
GUI components:
--- ----------
1) At the top of the gui is a info text label where information will
be posted, e.g. when traversing menu items text indicating how to get
help on the item and its current value will be displayed.
2) Below the info label is the area where the menu buttons, Actions,
Clients, etc., are presented. If a menu item has a checkbox,
it corresponds to a boolean on/off variable. Otherwise it is
either a string variable, or an action not associated with a
variable (for the most part).
3) Below the menu button area is a text label indicating the current x11vnc
X display being polled and the corresponding VNC display name. Both
will be \"(*none*)\" when there is no connection established.
4) Below the x11 and vnc displays text label is a text area there scrolling
information about actions being taken and commands being run is displayed.
To scroll click in the area and use PageUp/PageDown or the arrow keys.
5) At the bottom is an entry area. When one selects a menu item that
requires supplying a string value, the label will be set to the
parameter name and one types in the new value. Then one presses the
\"OK\" button or presses \"Enter\" to set the value. Or you can press
\"Skip\" or \"Escape\" to avoid changing the variable. Some variables
are boolean toggles (for example, \"Permissions -> viewonly\") or Radio
button selections. Selecting these menu items will not activate the
entry area but rather toggle the variable directly.
Cascades Bug: There is a bug not yet worked around for the cascade menus
where the (?) help button gets in the way. To get the mouse over to
the cascade menu click and release mouse to activate the cascade, then
you can click on its items. Dragging with a mouse button held down will
not work (sorry!).
Key Bindings:
In the Text Area: Control-/ selects all of the text.
Anywhere: Control-d invokes \"Actions -> detach\"
Anywhere: Control-a invokes \"Actions -> attach\"
Anywhere: Control-p invokes \"Actions -> ping\"
Anywhere: Control-u and Control-r invoke \"Actions -> update-all\"
Misc:
Since x11vnc has so many settings and to avoid further confusion,
the libvncserver options:
-alwaysshared
-nevershared
-dontdisconnect
are not available for changing in a running x11vnc (even though it
is feasible). These options overlap with the x11vnc options -shared
and -forever which are hopefully enough for most usage. They may be
specified for x11vnc startup if desired.
"
}
proc center_win {w} {
wm withdraw $w
set x [expr [winfo screenwidth $w]/2 - [winfo reqwidth $w]/2];
set y [expr [winfo screenheight $w]/2 - [winfo reqheight $w]/2];
wm geom $w +$x+$y
wm deiconify $w
update
}
proc textwidth {text} {
set min 0;
foreach line [split $text "\n"] {
set n [string length $line]
if {$n > $min} {
set min $n
}
}
return $min
}
proc textheight {text} {
set count 0;
foreach line [split $text "\n"] {
incr count
}
return $count
}
proc make_toplevel {w {title ""}} {
catch {destroy $w}
toplevel $w;
bind $w <Escape> "destroy $w"
if {$title != ""} {
wm title $w $title
}
}
proc textwin {name title text} {
global max_text_height max_text_width
global bfont ffont
set width [textwidth $text]
incr width
if {$width > $max_text_width} {
set width $max_text_width
}
set height [textheight $text]
if {$height > $max_text_height} {
set height $max_text_height
}
set w ".text_$name"
make_toplevel $w $title
frame $w.f -bd 0;
pack $w.f -fill both -expand 1
text $w.f.t -width $width -height $height -setgrid 1 -bd 2 \
-yscrollcommand "$w.f.y set" -relief ridge \
-font $ffont;
scrollbar $w.f.y -orient v -relief sunken -command "$w.f.t yview";
button $w.f.b -text "Dismiss" -command "destroy $w" -font $bfont \
-pady 2
$w.f.t insert 1.0 $text;
bind $w <Enter> "focus $w.f.t"
wm withdraw $w
pack $w.f.b -side bottom -fill x
pack $w.f.y -side right -fill y;
pack $w.f.t -side top -fill both -expand 1;
update
center_win $w
}
proc active_when_connected {item} {
global helpremote helptext
if {[opt_match G $item]} {
return 1
} elseif {[is_action $item]} {
if {[opt_match R $item]} {
return 1
} else {
return 0
}
} elseif {[info exists helpremote($item)]} {
return 1
} else {
return 0
}
}
proc active_when_starting {item} {
global helpremote helptext
if {[opt_match G $item]} {
return 1
} elseif {[is_action $item]} {
if {[opt_match S $item]} {
return 1
} else {
return 0
}
} elseif {[info exists helptext($item)]} {
return 1
} else {
return 0
}
}
proc help_win {item} {
global helptext helpremote menu_var
global query_ans query_aro
set ok 0
set text "Help on $item:\n\n"
if {[is_gui_internal $item]} {
if {$item != "gui" && $item != "all"} {
append text " + Is a gui internal Action (cannot be set).\n";
}
} elseif {[is_action $item]} {
append text " + Is a remote control Action (cannot be set).\n";
} elseif {[active_when_connected $item]} {
append text " + Can be changed in a running x11vnc.\n";
} else {
append text " - Cannot be changed in a running x11vnc.\n";
}
if {[is_gui_internal $item]} {
;
} elseif {[active_when_starting $item]} {
append text " + Can be set at x11vnc startup.\n";
} else {
append text " - Cannot be set at x11vnc startup.\n";
}
append text "\n"
if {[info exists helptext($item)]} {
append text "\n"
if {[is_gui_internal $item]} {
append text "==== x11vnc help: ====\n";
} else {
append text "==== x11vnc startup option help: ====\n";
}
append text "\n"
append text $helptext($item)
append text "\n"
set ok 1
}
if {[info exists helpremote($item)]} {
append text "\n"
append text "==== x11vnc remote control help: ====\n";
append text "\n"
append text $helpremote($item)
set ok 1
}
if {![is_action $item] && [info exists menu_var($item)]} {
global unset_str
append text "\n\n"
append text "==== current $item value: ====\n";
append text "\n"
if {$menu_var($item) == ""} {
append text "$unset_str\n"
} else {
append text "$menu_var($item)\n"
}
if {$item == "http" || $item == "httpdir" || $item == "httpport"} {
global vnc_url;
append text "\nURL: $vnc_url\n"
}
}
if {$item == "start"} {
set str [get_start_x11vnc_txt]
append text $str
append_text "$str\n"
append text "\nPossible \$HOME/.x11vncrc settings for this command:\n\n"
set rctxt [get_start_x11vnc_cmd 1]
append text "$rctxt\n"
}
regsub -all { } $item " " name
if {$ok} {
textwin $name "x11vnc help: $item" "$text";
}
return $ok
}
proc parse_help {} {
global env x11vnc_prog;
global helpall helptext;
set helppipe [open "| $x11vnc_prog -help" "r"];
if {$helppipe == ""} {
puts stderr "failed to run $x11vnc_prog -help";
exit 1;
}
set sawopts 0;
set curropt "";
while {[gets $helppipe line] > -1} {
append helpall "$line\n"
# XXX
if {[regexp {^Options:} $line]} {
set sawopts 1;
continue;
}
# XXX
if {[regexp {^These options} $line]} {
continue;
}
if {! $sawopts} {
continue;
}
if {[regexp {^-([A-z_][A-z_]*)} $line match name]} {
set allnames($name) 1;
if {"$curropt" != "no$name" && "no$curropt" != "$name"} {
set curropt $name;
set helptext($curropt) "$line\n";
} else {
append helptext($curropt) "$line\n";
}
} elseif {$curropt != ""} {
append helptext($curropt) "$line\n";
}
}
foreach name [array names allnames] {
if {[regexp {^no} $name]} {
regsub {^no} $name "" pair
} else {
set pair "no$name"
}
if {[info exists helptext($name)]} {
if ![info exists helptext($pair)] {
set helptext($pair) $helptext($name);
}
} elseif {[info exists helptext($pair)]} {
if ![info exists helptext($name)] {
set helptext($name) $helptext($pair);
}
}
}
set_internal_help
}
proc tweak_both {new old} {
tweak_help $new $old
tweak_remote_help $new $old
}
proc tweak_remote_help {new old} {
global helpremote
if ![info exists helpremote($new)] {
if {[info exists helpremote($old)]} {
set helpremote($new) $helpremote($old)
}
}
}
proc tweak_help {new old} {
global helptext
if ![info exists helptext($new)] {
if {[info exists helptext($old)]} {
set helptext($new) $helptext($old)
}
}
}
proc parse_remote_help {} {
global helpremote helptext help_indent remote_name;
set sawopts 0;
set curropt "";
set possopts "";
set offset [expr $help_indent - 1];
foreach line [split $helptext(remote) "\n"] {
set line [string range $line $offset end];
# XXX
if {[regexp {^The following -remote/-R commands} $line]} {
set sawopts 1;
continue;
}
# XXX
if {[regexp {^The vncconnect.*command} $line]} {
set sawopts 0;
}
if {! $sawopts} {
continue;
}
if {[regexp {^([A-z_][A-z_:]*)} $line match name]} {
regsub {:.*$} $name "" popt
lappend possopts $popt
if {"$curropt" != "no$name" && "no$curropt" != "$name"} {
set curropt $name;
regsub {:.*$} $curropt "" curropt
set remote_name($curropt) $name
set helpremote($curropt) "$line\n";
} else {
append helpremote($curropt) "$line\n";
}
} elseif {$curropt != ""} {
append helpremote($curropt) "$line\n";
}
}
foreach popt $possopts {
if {[info exists helpremote($popt)]} {
continue
}
if {[regexp {^no} $popt]} {
regsub {^no} $popt "" try
} else {
set try "no$popt"
}
if {[info exists helpremote($try)]} {
set helpremote($popt) $helpremote($try)
}
}
}
proc parse_query_help {} {
global query_ans query_aro query_ans_list query_aro_list helptext;
set sawans 0;
set sawaro 0;
set ans_str ""
set aro_str ""
foreach line [split $helptext(query) "\n"] {
if {! $sawans && [regexp {^ *ans=} $line]} {
set sawans 1
}
if {! $sawans} {
continue
}
if {[regexp {^ *aro=} $line]} {
set sawaro 1
}
if {$sawaro && [regexp {^[ ]*$} $line]} {
set sawans 0
break
}
regsub {ans=} $line "" line
regsub {aro=} $line "" line
set line [string trim $line]
if {$sawaro} {
set aro_str "$aro_str $line"
} else {
set ans_str "$ans_str $line"
}
}
regsub -all { *} $ans_str " " ans_str
regsub -all { *} $aro_str " " aro_str
set ans_str [string trim $ans_str]
set aro_str [string trim $aro_str]
set query_ans_list [split $ans_str]
set query_aro_list [split $aro_str]
foreach item $query_ans_list {
if {[regexp {^[ ]*$} $item]} {
continue
}
set query_ans($item) 1
}
foreach item $query_aro_list {
if {[regexp {^[ ]*$} $item]} {
continue
}
set query_aro($item) 1
}
}
proc in_debug_mode {} {
global menu_var
if {![info exists menu_var(debug_gui)]} {
return 0
}
return $menu_var(debug_gui)
}
# Menubar utilities:
proc menus_state {state} {
global menu_b
foreach case [array names menu_b] {
set menu_button $menu_b($case)
$menu_button configure -state $state
}
}
proc menus_enable {} {
global menus_disabled
menus_state "normal"
set menus_disabled 0
}
proc menus_disable {} {
global menus_disabled
set menus_disabled 1
menus_state "disabled"
}
# Entry box utilities:
proc entry_state {x state} {
global entry_box entry_label entry_ok entry_help entry_skip entry_browse
global old_labels
if {$x == "all"} {
if {!$old_labels} {
$entry_label configure -state $state
}
$entry_box configure -state $state
$entry_ok configure -state $state
$entry_skip configure -state $state
$entry_help configure -state $state
$entry_browse configure -state $state
} elseif {$x == "label"} {
if {!$old_labels} {
$entry_label configure -state $state
}
} elseif {$x == "box"} {
$entry_box configure -state $state
} elseif {$x == "ok"} {
$entry_ok configure -state $state
} elseif {$x == "skip"} {
$entry_skip configure -state $state
} elseif {$x == "help"} {
$entry_help configure -state $state
} elseif {$x == "browse"} {
$entry_browse configure -state $state
}
}
proc entry_enable {{x "all"}} {
entry_state $x normal
}
proc entry_disable {{x "all"}} {
entry_state $x disabled
}
proc entry_browse_button {{show 1}} {
global entry_browse
if {$show} {
pack $entry_browse -side left
} else {
pack forget $entry_browse
}
}
proc entry_focus {} {
global entry_box
focus $entry_box
}
proc entry_select {} {
global entry_box
$entry_box selection range 0 end
}
proc entry_get {} {
global entry_box
return [$entry_box get]
}
proc entry_insert {str} {
global entry_box
entry_delete
$entry_box insert end $str
$entry_box icursor end
}
proc entry_delete {} {
global entry_box
$entry_box delete 0 end
}
# Utilities for remote control and updating vars.
proc push_new_value {item name new {query 1}} {
global menu_var always_update remote_output query_output
global delay_sleep extra_sleep extra_sleep_split
global query_result_list
set debug [in_debug_mode]
set getout 0
set print_getout 0;
set do_query_all 0
set newnew ""
if {$item == "disconnect"} {
set newnew "N/A"
set do_query_all 1
} elseif {$always_update} {
set do_query_all 1
}
if {$item == "remote-cmd"} {
# kludge for arbitrary remote command:
if {[regexp {^Q:} $new]} {
# extra kludge for Q:var to mean -Q var
regsub {^Q:} $new "" new
set qonly 1
} else {
set qonly 0
}
# need to extract item from new:
set qtmp $new
regsub {:.*$} $qtmp "" qtmp
if {$qonly} {
set rargs [list "-Q" "$qtmp"]
set print_getout 1
set qargs ""
} else {
set rargs [list "-R" "$new"]
set qargs ""
}
set getout 1
} elseif {[value_is_string $item]} {
# string var:
set rargs [list "-R" "$name:$new"]
set qargs [list "-Q" "$name"]
} else {
# boolean var:
set rargs [list "-R" "$name"]
set qargs [list "-Q" "$name"]
}
if {! $query && ! $always_update} {
set getout 1
} elseif {$item == "noremote"} {
set getout 1
} elseif {[is_action $item] && ![opt_match Q $item] && $rargs != ""} {
set getout 1
} elseif {[regexp {^(sid|id)$} $item] && ![regexp {^0x} $new]} {
set getout 1
}
set remote_output ""
set query_output ""
if {!$debug} {
append_text "x11vnc $rargs ..."
}
if {$getout} {
set remote_output [run_remote_cmd $rargs]
if {$print_getout} {
append_text "\t$remote_output"
}
append_text "\n"
return
}
if {$do_query_all} {
set all [all_query_vars]
set qargs [list "-Q" $all]
}
set rqargs [concat $rargs $qargs]
set query [run_remote_cmd $rqargs]
set query_output $query
set query_result_list ""
if {$newnew != ""} {
set new $newnew
}
if {![see_if_ok $query $item "$name:$new"]} {
# failed
if {[regexp {^a..=} $query]} {
# but some result came back
# synchronize everything with a 2nd call.
set query_output [query_all 1]
} else {
# server may be dead
if {$item != "ping" && $item != "attach"} {
try_connect
}
}
} else {
# succeeded
# synchronize this variable (or variables)
# for a speedup used the list parsed by see_if_ok.
update_menu_vars "USE_LIST"
if {$do_query_all} {
global all_settings
set all_settings $query
}
}
}
# For updating a string variable. Also used for simple OK/Skip dialogs
# with entry = 0.
proc entry_dialog {item {entry 1}} {
global menu_var entry_str entry_set entry_dialog_item
global unset_str connected_to_x11vnc
set entry_str "Set $item"
set entry_set 0
set entry_dialog_item $item
entry_enable
menus_disable
if {$entry} {
entry_insert ""
if {[info exists menu_var($item)] &&
$menu_var($item) != $unset_str} {
entry_insert $menu_var($item)
entry_select
}
if {[is_browse $item]} {
entry_browse_button
}
set_info "Set parameter in entry box, "
entry_focus
} else {
entry_disable box
}
update
# wait for user reply:
vwait entry_set
set rc $entry_set
set entry_set 0
set value [entry_get]
update
entry_browse_button 0
set entry_str "Set... :"
entry_delete
entry_disable
menus_enable
update
if {! $entry} {
;
} elseif {$rc} {
set menu_var($item) $value
} else {
if {[in_debug_mode]} {
append_text "skipped setting $item\n"
}
}
return $rc
}
proc warning_dialog {msg {item "gui"} } {
append_text $msg
# just reuse the entry widgets for a yes/no dialog
return [entry_dialog $item 0]
}
# For updating a boolean toggle:
proc check_var {item} {
global menu_var
set inval $menu_var($item);
if {$item == "debug_gui"} {
return "";
}
set rname $item
if {! $inval} {
if {[regexp {^no} $item]} {
regsub {^no} $rname "" rname
} else {
set rname "no$rname"
}
}
return $rname
}
proc see_if_ok {query item expected} {
global query_result_list
set ok 0
set found ""
set query_result_list [split_query $query]
foreach q $query_result_list {
# XXX following will crash if $item is not a good regexp
# need to protect it \Q$item\E style...
# if {[regexp "^$item:" $q]} {
# set found $q
# }
if {[string first "$item:" $q] == 0} {
set found $q
}
if {$q == $expected} {
set ok 1
if {$found != ""} {
break;
}
}
}
if {$found == ""} {
set msg $query
regsub {^a..=} $msg {} msg
if {[string length $msg] > 60} {
set msg [string range $msg 0 60]
}
} else {
set msg $found
}
if {!$ok && $found != ""} {
# check for floating point match:
set v1 ""
set v2 ""
regexp {:([0-9.][0-9.]*)$} $found m0 v1
regexp {:([0-9.][0-9.]*)$} $expected m0 v2
if {$v1 != "" && $v2 != ""} {
set diff ""
catch {set diff [expr "$v1 - $v2"]}
if {$diff != ""} {
if {$diff < 0} {
set diff [expr "0.0 - $diff"]
}
if {$diff < 0.00001} {
set ok 1
}
}
}
}
if {$ok} {
append_text "\tSet OK ($msg)\n"
return 1
} elseif {[opt_match P $item] && [regexp {:(-|\+)} $expected]} {
# e.g. blackout:+30x30+20+20
append_text "\t($msg)\n"
return 1
} elseif {[regexp {:[0-9]\.[0-9]} $expected]} {
append_text "\t($msg)\n"
return 1
} elseif {$item == "connect" || $item == "disconnect"} {
append_text "\t($msg)\n"
return 1
} else {
append_text "\t*FAILED* $msg\n"
return 0
}
}
proc update_menu_vars {{query ""}} {
global all_settings menu_var query_result_list
set debug [in_debug_mode]
if {$query == "USE_LIST"} {
;
} elseif {$query == ""} {
set query_result_list [split_query $all_settings]
} else {
set query_result_list [split_query $query]
}
foreach piece $query_result_list {
if {[regexp {^([^:][^:]*):(.*)$} $piece m0 item val]} {
if {[info exists menu_var($item)]} {
set old $menu_var($item)
if {$val == "N/A"} {
continue
}
set menu_var($item) $val
}
if {$item == "clients"} {
update_clients_menu $val
} elseif {$item == "display"} {
set_x11_display $val
} elseif {$item == "vncdisplay"} {
set_vnc_display $val
} elseif {$item == "http_url"} {
set_vnc_url $val
}
}
}
}
proc clear_all {} {
global menu_var unset_str
set debug [in_debug_mode]
foreach item [array names menu_var] {
if {$item == "debug_gui"} {
continue
}
if {[info exists menu_var($item)]} {
if [is_action $item] {
set menu_var($item) ""
} elseif {[value_is_bool $item]} {
set menu_var($item) 0
} elseif {[value_is_string $item]} {
set menu_var($item) $unset_str
}
}
}
append_text "Cleared all settings.\n"
}
proc all_query_vars {} {
global query_ans_list query_aro_list all_settings
global cache_all_query_vars
if {$cache_all_query_vars != ""} {
return $cache_all_query_vars
}
set qry ""
foreach item $query_ans_list {
if {$qry == ""} {
set qry $item
} else {
append qry ",$item"
}
}
foreach item $query_aro_list {
if {$qry == ""} {
set qry $item
} else {
append qry ",$item"
}
}
set cache_all_query_vars $qry
return $qry
}
proc query_all {{quiet 0}} {
global query_ans_list query_aro_list all_settings
set qry [all_query_vars]
set qargs [list "-Q" $qry]
set all [run_remote_cmd $qargs]
if {[regexp {ans=} $all]} {
if {! $quiet} {
append_text "Retrieved all settings.\n"
}
set all_settings $all
update_menu_vars $all
} else {
if {! $quiet} {
append_text "Failed to retrieve settings.\n"
}
}
return $all
}
proc set_info {str} {
global info_str info_label
#set w1 [$info_label cget -width]
#set w2 [winfo width $info_label]
#puts "set_info: w=$w1 winfo=$w2"
#append_text "$str\n"
set info_str "$str"
update
}
proc append_text {str} {
global text_area
$text_area insert end $str
$text_area see end
}
proc show_all_settings {} {
global all_settings
set txt "\nRead-Write setting:\n\n"
foreach item [split_query $all_settings] {
regsub {:} $item {: } item
append txt " $item\n"
if {[regexp {noremote} $item]} {
append txt "\nRead-Only setting:\n\n"
}
}
textwin "Settings" "All Current Settings" $txt
}
proc show_logfile {} {
global menu_var unset_str
set logfile $menu_var(logfile)
if {$logfile == "" || $logfile == $unset_str} {
set txt "\nNo logfile has been specified.\n\n"
} elseif {![file exists $logfile]} {
set txt "\nLogfile \"$logfile\" does not exist.\n\n"
} else {
set fh "-3"
set err ""
catch {set fh [open $logfile "r"]} err
if {$fh == "-3"} {
set txt "\nError opening \"$logfile\" $err.\n\n"
} else {
set txt "\nLogfile \"$logfile\" current contents:\n"
while {[gets $fh line] > -1} {
append txt "$line\n"
}
close $fh
}
}
textwin "Logfile" "Logfile" $txt
}
proc tail_logfile {} {
global menu_var unset_str ffont
set logfile $menu_var(logfile)
set txt ""
if {$logfile == "" || $logfile == $unset_str} {
set txt "\nNo logfile has been specified.\n\n"
} elseif {![file exists $logfile]} {
set txt "\nLogfile \"$logfile\" does not exist.\n\n"
} else {
set cmd ""
set xterm_cmd "xterm -sb -fn $ffont -geometry 80x45 -title x11vnc-logfile -e"
set cmd [split $xterm_cmd]
lappend cmd "tail"
lappend cmd "+1f"
lappend cmd $logfile
lappend cmd "&"
catch {[eval exec $cmd]}
}
if {$txt != ""} {
textwin "Logfile" "Logfile" $txt
}
}
proc set_connected {yesno} {
global connected_to_x11vnc
set orig $connected_to_x11vnc
if {$yesno == "yes"} {
set connected_to_x11vnc 1
} else {
set connected_to_x11vnc 0
no_x11_display
no_vnc_display
}
if {$orig != $connected_to_x11vnc} {
set_widgets
}
}
proc detach_from_display {} {
global connected_to_x11vnc reply_xdisplay x11vnc_xdisplay
set str "Detaching from X display."
if {$reply_xdisplay != ""} {
set str "Detaching from $reply_xdisplay."
} elseif {$x11vnc_xdisplay != ""} {
set str "Detaching from $x11vnc_xdisplay."
}
if {$connected_to_x11vnc} {
append_text "$str\n"
}
set_connected no
}
# Menu item is an action:
proc do_action {item} {
global menu_var connected_to_x11vnc
if {[in_debug_mode]} {
append_text "action: \"$item\"\n"
}
if {$item == "ping"} {
try_connect
return
} elseif {$item == "start"} {
start_x11vnc
return
} elseif {$item == "detach"} {
detach_from_display
return
} elseif {$item == "attach"} {
try_connect_and_query_all
return
} elseif {$item == "update-all"} {
query_all
return
} elseif {$item == "clear-all"} {
clear_all
return
} elseif {$item == "show-start-cmd"} {
show_start_cmd
return
} elseif {$item == "all-settings"} {
show_all_settings
return
} elseif {$item == "show-logfile"} {
show_logfile
return
} elseif {$item == "tail-logfile"} {
tail_logfile
return
} elseif {$item == "stop+quit"} {
push_new_value "stop" "stop" 1 0
set_connected no
update
after 500
destroy .
}
if {[value_is_string $item]} {
if {! [entry_dialog $item]} {
return
}
set new $menu_var($item)
set name $item
} else {
set new 1
set name $item
}
if {! $connected_to_x11vnc} {
;
} elseif {[regexp {^(stop|quit|exit|shutdown)$} $item]} {
# just do -R
append_text "stopping remote x11vnc server...\n"
push_new_value $item $name $new 0
set_connected no
} elseif [opt_match Q $item] {
push_new_value $item $name $new 1
} else {
push_new_value $item $name $new 0
}
}
proc ptime {time} {
set usec [lindex [split $time] 0]
set sec [format "%.3f" [expr "$usec / 1000000.0"]]
puts "time: $sec secs."
}
proc do_var {item} {
global connected_to_x11vnc item_cascade menu_var
set debug [in_debug_mode]
set string 0
if {[is_action $item]} {
# Menu item is action:
if {$debug} {
ptime [time {do_action $item}]
} else {
do_action $item
}
return
}
if {[value_is_string $item]} {
# Menu item is a string:
if {$item_cascade($item) != ""} {
# Cascade sets variable automatically
} else {
# Otherwise Entry box
if {![entry_dialog $item]} {
return
}
}
set new $menu_var($item)
set name $item
} else {
# Menu item is a boolean:
set name [check_var $item]
if {$name == ""} {
return
}
set new 1
}
if {$connected_to_x11vnc} {
if {$debug} {
ptime [time {push_new_value $item $name $new 1}]
} else {
push_new_value $item $name $new 1
}
if {$item == "http"} {
global vnc_url
append_text " URL: $vnc_url\n"
}
}
}
proc menu_help {item} {
if ![help_win $item] {
textwin "nohelp" "No help available" \
"Sorry, no help avaiable for \"$item\""
}
}
proc opt_match {c item} {
global item_opts
if {[info exists item_opts($item)]} {
if {[regexp "^\[A-z\]*$c" $item_opts($item)]} {
return 1
}
}
return 0
}
proc is_action {item} {
return [opt_match A $item]
}
proc is_gui_internal {item} {
return [opt_match G $item]
}
proc is_browse {item} {
return [opt_match F $item]
}
proc value_is_string {item} {
global item_bool
if {! $item_bool($item)} {
return 1
} else {
return 0
}
}
proc value_is_bool {item} {
global item_bool
if {$item_bool($item)} {
return 1
} else {
return 0
}
}
proc split_query0 {query} {
# original slower way with regexp/regsub
regsub -all {aro=} $query {ans=} query
set items {}
while {1} {
if {! [regexp {^ans=(.*)$} $query m0 m1]} {
break
}
set item $m1
set m2 ""
regexp {,ans=.*$} $item m2
regsub {,ans=.*$} $item "" item
if {$item != ""} {
lappend items $item
}
set query $m2
regsub {^,} $query "" query
}
return $items
}
proc split_query {query} {
regsub -all {aro=} $query {ans=} query
set items {}
while {1} {
set n [string first "ans=" $query]
if {$n < 0} {
break
}
set from [expr $n+4]
set m [string first ",ans=" $query]
if {$m < 0} {
set more 0
set item [string range $query $from end]
} else {
set more 1
set to [expr $m-1]
set item [string range $query $from $to]
}
if {$item != ""} {
lappend items $item
}
if {$more} {
incr m
set query [string range $query $m end]
} else {
set query ""
}
}
return $items
}
proc set_x11_display {name} {
global x11_display
set x11_display "x11vnc X display: $name"
}
proc set_vnc_display {name} {
global vnc_display
set vnc_display "VNC display: $name"
}
proc set_vnc_url {name} {
global vnc_url
set vnc_url $name
}
proc no_x11_display {} {
set_x11_display "(*none*)"
}
proc no_vnc_display {} {
set_vnc_display "(*none*)"
}
proc no_vnc_url {} {
set_vnc_url "(*none*)"
}
proc fetch_displays {} {
set qargs [list "-Q" "display,vncdisplay"]
set result [run_remote_cmd $qargs]
set got_x11 0
set got_vnc 0
set got_url 0
foreach item [split_query $result] {
if {[regexp {^display:(.*)$} $item m0 m1]} {
set_x11_display $m1
set got_x11 1
} elseif {[regexp {^vncdisplay:(.*)$} $item m0 m1]} {
set_vnc_display $m1
set got_vnc 1
} elseif {[regexp {^http_url:(.*)$} $item m0 m1]} {
set_vnc_url $m1
set got_url 1
}
}
if {! $got_x11} {
no_x11_display
}
if {! $got_vnc} {
no_vnc_display
}
if {! $got_url} {
no_vnc_url
}
}
proc disconnect_dialog {client} {
set cid ""
set host ""
set msg "\n"
append msg "*** Client info string: $client\n"
if {[regexp {^(.*):(.*)/(.*)-(.*)$} $client m0 m1 m2 m3 m4]} {
if {$m4 == "ro"} {
set view "(viewonly)"
} else {
set view "(interactive)"
}
set host $m1
set cid $m3
append msg "*** Host: $m1, Port: $m2 Id: $m3 $view\n"
}
if {$cid == ""} {
append_text "Invalid client info string: $client\n"
return
}
append msg "*** To *DISCONNECT* this client press \"OK\", otherwise press \"Skip\"\n"
bell
if [warning_dialog $msg "current"] {
push_new_value "disconnect" "disconnect" $cid 1
} else {
append_text "disconnect cancelled.\n"
}
}
proc update_clients_and_repost {} {
global item_cascade menu_m menu_b
append_text "Refreshing connected clients list... "
query_all 1
update
set saw 0
set casc $item_cascade(current)
set last [$casc index end]
for {set i 0} {$i <= $last} {incr i} {
if {[$casc type $i] == "separator"} {
continue
}
set name [$casc entrycget $i -label]
if {[regexp {^#} $name]} {
continue
}
if {[regexp {^refresh-list} $name]} {
continue
}
if {! $saw} {
append_text "\n"
}
set saw 1
append_text "client: $name\n"
}
if {! $saw} {
append_text "done.\n"
}
}
proc update_clients_menu {list} {
global item_cascade ffont
set subm $item_cascade(current);
catch {destroy $subm}
menu $subm -tearoff 0 -font $ffont
$subm add command
$subm add command -label "refresh-list" -command "update_clients_and_repost"
$subm add separator
set count 0
foreach client [split $list ","] {
regsub {:[0-9][0-9]*/} $client {/} lab
$subm add command -label "$client" \
-command "disconnect_dialog $client"
incr count
}
$subm entryconfigure 0 -label "#clients: $count"
}
proc set_widgets {} {
global connected_to_x11vnc item_case item_entry menu_m
foreach item [array names item_case] {
set case $item_case($item)
set menu $menu_m($case)
set entry $item_entry($item)
set type [$menu type $entry]
if {$type == "separator" || $type == "tearoff"} {
continue
}
if {$connected_to_x11vnc} {
if {[active_when_connected $item]} {
$menu entryconfigure $entry -state normal
} else {
$menu entryconfigure $entry -state disabled
}
} else {
if {[active_when_starting $item]} {
$menu entryconfigure $entry -state normal
} else {
$menu entryconfigure $entry -state disabled
}
}
}
}
proc make_widgets {} {
global template
global menu_b menu_m
global item_opts item_bool item_case item_entry menu_var unset_str
global item_cascade
global info_label info_str x11_display vnc_display
global text_area
global entry_box entry_str entry_set entry_label entry_ok entry_browse
global entry_help entry_skip
global bfont ffont
global helptext helpremote helplabel
set label_width 80
set info_label .info
label $info_label -textvariable info_str -bd 2 -relief groove \
-anchor w -width $label_width -font $ffont
pack $info_label -side top -fill x -expand 0
# Extract the Rows:
set row 0;
set colmax 0;
foreach line [split $template "\n"] {
if {[regexp {^Row: (.*)} $line rest]} {
set col 0
foreach case [split $rest] {
if {$case == "" || $case == "Row:"} {
continue
}
set menu_row($case) $row
set menu_col($case) $col
set menu_count($case) 0
lappend cases($col) $case;
set len [string length $case]
if {[info exists max_len($col)]} {
if {$len > $max_len($col)} {
set max_len($col) $len
}
} else {
set max_len($col) $len
}
incr col
if {$col > $colmax} {
set colmax $col
}
}
incr row;
}
}
# Make frames for the rows and make the menu buttons.
set f ".menuframe"
frame $f
for {set c 0} {$c < $colmax} {incr c} {
set colf "$f.menuframe$c"
frame $colf
pack $colf -side left -fill y
set fbg [$colf cget -background]
foreach case $cases($c) {
set menub "$colf.menu$case";
set menu "$colf.menu$case.menu";
set menu_b($case) $menub
set menu_m($case) $menu
set ul 0
foreach char [split $case ""] {
set char [string tolower $char]
if {![info exists underlined($char)]} {
set underlined($char) 1
break
}
incr ul
}
menubutton $menub -text "$case" -underline $ul \
-anchor w -menu $menu -background $fbg \
-font $bfont
pack $menub -side top -fill x
menu $menu -tearoff 0
}
}
pack $f -side top -fill x
# Now extract the menu items:
set case "";
foreach line [split $template "\n"] {
if {[regexp {^Row:} $line]} {
continue
}
if {[regexp {^[A-z]} $line]} {
set case [string trim $line]
continue;
}
set item [string trim $line]
regsub -all { *} $item " " item
if {$item == ""} {
continue;
}
set opts ""
if {[regexp {^=} $item]} {
set opts [lindex [split $item] 0]
regsub {^=} $opts "" opts
set item [lindex [split $item] 1]
}
if {[regexp {^0} $opts]} {
continue;
}
if {[regexp {:$} $item]} {
set bool 0
} else {
set bool 1
}
regsub {:$} $item {} item
set item_opts($item) $opts
set item_case($item) $case
set item_bool($item) $bool
set item_cascade($item) ""
set item_entry($item) $menu_count($case)
if {0} { puts "ITEM: $item - $opts - $case - $bool - $menu_count($case)" }
set mvar 0
set m $menu_m($case)
# Create the menu items, its variables, etc., etc.
if {$item == "--"} {
$m add separator
} elseif {$item == "Quit"} {
# Quit item must shut us down:
$m add command -label "$item" -underline 0 \
-font $ffont \
-command {destroy .; exit 0}
} elseif {$case == "Help"} {
# Help is simple help:
$m add command -label "$item" \
-font $ffont \
-command "menu_help $item"
} elseif {$item == "current"} {
# Current clients cascade
set subm $m.cascade$menu_count($case)
set item_cascade($item) $subm
update_clients_menu ""
$m add cascade -label "$item" \
-font $ffont \
-menu $subm
} elseif {[is_action $item]} {
# Action
$m add command -label "$item" \
-font $ffont \
-command "do_var $item"
set menu_var($item) ""; # for convenience
} elseif {! $item_bool($item)} {
# String
if {[regexp -- {-C:(.*)} $item_opts($item) m0 m1]} {
# Radiobutton select
set subm $m.cascade$menu_count($case)
menu $subm -tearoff 0 -font $ffont
foreach val [split $m1 ","] {
$subm add radiobutton -label "$val" \
-command "do_var $item" \
-value "$val" \
-font $ffont \
-variable menu_var($item)
}
$m add cascade -label "$item" \
-font $ffont \
-menu $subm
set item_cascade($item) $subm
} else {
# Arbitrary_string
$m add command -label "$item" \
-font $ffont \
-command "do_var $item"
}
set mvar 1
} else {
# Boolean
$m add checkbutton -label "$item" \
-command "do_var $item" \
-font $ffont \
-variable menu_var($item)
set menu_var($item) 0
}
incr menu_count($case)
if {$mvar} {
set menu_var($item) $unset_str
}
}
# Now make the litte "(?)" help buttons
foreach case [array names menu_m] {
if {$case == "Help"} {
continue;
}
set m $menu_m($case);
set n [$m index end]
for {set i 0} {$i <= $n} {incr i} {
set type [$m type $i]
if {$type == "separator"} {
$m add separator
} elseif {$type == "tearoff"} {
continue;
} else {
set label [$m entrycget $i -label]
set str ""
if {[info exists helpremote($label)]} {
set str "(?)"
} elseif {[info exists helptext($label)]} {
set str "(?)"
}
$m add command -label $str \
-font $ffont \
-command "menu_help $label";
if {$str == ""} {
$m entryconfigure end -state disabled
}
set arg "$m,$i"
set helplabel($arg) $label
set j [$m index end]
set arg "$m,$j"
set helplabel($arg) $label
}
if {$i == 0} {
$m entryconfigure end -columnbreak 1
}
}
}
# Make the x11 and vnc display label bar:
set df .displayframe
frame $df -bd 1 -relief groove
set df_x11 "$df.xdisplay"
no_x11_display
set lw [expr {$label_width / 2}]
label $df_x11 -textvariable x11_display -width $lw -anchor w \
-font $ffont
set df_vnc "$df.vdisplay"
no_vnc_display
label $df_vnc -textvariable vnc_display -width $lw -anchor w \
-font $ffont
pack $df_x11 $df_vnc -side left
pack $df -side top -fill x
# text area
text .text -height 11 -relief ridge -font $ffont
set text_area .text
pack .text -side top -fill both -expand 1
set str "Click Help -> gui for overview."
append_text "\n$str\n\n"
# Make entry box stuff
set ef .entryframe
frame $ef -bd 1 -relief groove
# Entry Label
set ef_label "$ef.label"
label $ef_label -textvariable entry_str -anchor w -font $bfont
set entry_str "Set... : "
set ef_entry "$ef.entry"
entry $ef_entry -relief sunken -font $ffont
bind $ef_entry <KeyPress-Return> {set entry_set 1}
bind $ef_entry <KeyPress-Escape> {set entry_set 0}
# Entry OK button
set bpx "1m"
set bpy "1"
set hlt "0"
set ef_ok "$ef.ok"
button $ef_ok -text OK -pady $bpy -padx $bpx -command {set entry_set 1} \
-highlightthickness $hlt \
-font $bfont
# Entry Skip button
set ef_skip "$ef.skip"
button $ef_skip -text Skip -pady $bpy -padx $bpx -command {set entry_set 0} \
-highlightthickness $hlt \
-font $bfont
# Entry Help button
set ef_help "$ef.help"
button $ef_help -text Help -pady $bpy -padx $bpx -command \
{menu_help $entry_dialog_item} -font $bfont \
-highlightthickness $hlt
# Entry Browse button
set ef_browse "$ef.browse"
button $ef_browse -text "Browse..." -pady $bpy -padx $bpx -font $bfont \
-highlightthickness $hlt \
-command {entry_insert [tk_getOpenFile]}
pack $ef_label -side left
pack $ef_entry -side left -fill x -expand 1
pack $ef_ok -side right
pack $ef_skip -side right
pack $ef_help -side right
pack $ef -side bottom -fill x
set entry_ok $ef_ok
set entry_skip $ef_skip
set entry_help $ef_help
set entry_box $ef_entry
set entry_browse $ef_browse
set entry_label $ef_label
entry_disable
update
wm minsize . [winfo width .] [winfo height .]
#set w [winfo width .info]
#puts "w1: $w"
#set w [winfo reqwidth .info]
#puts "w2: $w"
}
proc menu_bindings {} {
bind Menu <<MenuSelect>> {
#syntax hilite bug \
MenuSelect>>
set n [%W index active]
set label " "
if {$n != "none"} {
set str %W,$n
set which ""
if {[info exists helplabel($str)]} {
set vname [format %%-16s $helplabel($str)]
set label "Click (?) for help on: $vname"
set which $helplabel($str)
}
if {$which == ""} {
;
} elseif {[is_action $which]} {
if {[info exists menu_var($which)]
&& $menu_var($which) != ""} {
set label "$label value: $menu_var($which)"
} else {
set label "$label (is action)"
}
} elseif {[info exists menu_var($which)]} {
set label "$label value: $menu_var($which)"
if {$which == "http"} {
global vnc_url
set label "$label URL: $vnc_url"
}
}
}
set_info $label
}
}
proc key_bindings {} {
global env menus_disabled
if {[info exists env(USER)] && $env(USER) == "runge"} {
# quick restart
bind . <Control-KeyPress-c> {exec $argv0 $argv &; destroy .}
}
bind . <Control-KeyPress-p> { \
global menus_disabled; \
if {!$menus_disabled} {try_connect_and_query_all} \
}
bind . <Control-KeyPress-u> { \
global menus_disabled; \
if {!$menus_disabled} {query_all 0} \
}
bind . <Control-KeyPress-r> { \
global menus_disabled; \
if {!$menus_disabled} {query_all 0} \
}
bind . <Control-KeyPress-d> { \
global menus_disabled; \
if {!$menus_disabled} {detach_from_display} \
}
bind . <Control-KeyPress-a> { \
global menus_disabled; \
if {!$menus_disabled} {try_connect_and_query_all} \
}
}
proc stop_watch {onoff} {
global orig_cursor text_area entry_box
set widgets [list . $text_area $entry_box]
if {$onoff == "on"} {
foreach item $widgets {
$item config -cursor {watch}
}
} else {
foreach item $widgets {
$item config -cursor {}
}
}
update
}
proc double_check_noremote {} {
set msg "\n\n"
append msg "WARNING: setting \"noremote\" will disable ALL remote control commands\n"
append msg "WARNING: (i.e. this gui will be locked out) Do you really want to do this?\n"
append msg "WARNING: If so, press \"OK\", otherwise press \"Skip\"\n"
append msg "\n"
bell
return [warning_dialog $msg "noremote"]
}
proc double_check_start_x11vnc {} {
global hostname
set msg [get_start_x11vnc_txt]
append msg "\n"
append msg "*** To run the above command on machine \"$hostname\" to\n"
append msg "*** start x11vnc press \"OK\" otherwise press \"Skip\".\n"
return [warning_dialog $msg "start"]
}
proc get_start_x11vnc_txt {} {
set cmd [get_start_x11vnc_cmd]
set str [join $cmd]
set msg ""
append msg "\n"
append msg "==== The command built so far is: ====\n";
append msg "\n"
append msg "$str\n"
return $msg
}
proc show_start_cmd {} {
set msg [get_start_x11vnc_txt]
append_text "$msg\n"
}
proc get_start_x11vnc_cmd {{show_rc 0}} {
global menu_var unset_str x11vnc_prog
set xterm_cmd "xterm -iconic -geometry 80x35 -title x11vnc-console -e"
set cmd [split $xterm_cmd]
lappend cmd $x11vnc_prog
set rc_txt ""
set saw_id 0
foreach item [lsort [array names menu_var]] {
if {![active_when_starting $item]} {
continue
}
if {[is_action $item]} {
continue
}
if {$item == "debug_gui"} {
continue
}
if {$item == "id" || $item == "sid"} {
set val $menu_var($item);
if {$val == "0x0" || $val == "root"} {
continue
}
}
if {$item == "sid" && $saw_id} {
continue
}
if {$item == "id"} {
set saw_id 1
}
if {$item == "httpport" && $menu_var($item) == "0"} {
continue
}
if {$item == "progressive" && $menu_var($item) == "0"} {
continue
}
if {$item == "dontdisconnect" && $menu_var($item) == "-1"} {
continue
}
if {$item == "alwaysshared" && $menu_var($item) == "-1"} {
continue
}
if {[value_is_bool $item]} {
if {[info exists menu_var($item)]} {
if {$menu_var($item)} {
lappend cmd "-$item"
append rc_txt "-$item\n"
}
}
} elseif {[value_is_string $item]} {
if {[info exists menu_var($item)]} {
if {$menu_var($item) != ""
&& $menu_var($item) != $unset_str} {
set nitem $item
if {$nitem == "screen_blank"} {
set nitem "sb"
} elseif {$nitem == "xrandr_mode"} {
set nitem "xrandr"
} elseif {$nitem == "solid_color"} {
set nitem "solid"
}
lappend cmd "-$nitem"
lappend cmd $menu_var($item)
append rc_txt "-$nitem $menu_var($item)\n"
}
}
}
}
lappend cmd "2>"
lappend cmd "/dev/null"
lappend cmd "&"
if {$show_rc} {
return $rc_txt
} else {
return $cmd
}
}
proc start_x11vnc {} {
global menu_var unset_str
global x11vnc_prog x11vnc_xdisplay
global connected_to_x11vnc
if {$connected_to_x11vnc} {
append_text "\n"
append_text "WARNING: Still connected to an x11vnc server.\n"
append_text "WARNING: Use \"stop\" or \"detach\" first.\n"
return 0
}
if {![double_check_start_x11vnc]} {
return
}
set x11vnc_xdisplay ""
if {[info exists menu_var(display)]} {
if {$menu_var(display) != "" && $menu_var(display) != $unset_str} {
set x11vnc_xdisplay $menu_var(display)
}
}
set cmd [get_start_x11vnc_cmd]
set str [join $cmd]
regsub { -e} $str " -e \\\n " str
if {0} {
puts "running: $str"
foreach word $cmd {
puts " word: $word"
}
}
append_text "Starting x11vnc in an iconified xterm with command:\n"
append_text " $str\n\n"
catch {[eval exec $cmd]}
after 500
try_connect_and_query_all 3
}
proc run_remote_cmd {opts} {
global menu_var x11vnc_prog x11vnc_cmdline x11vnc_xdisplay
set debug [in_debug_mode]
if {[lindex $opts 0] == "-R" && [lindex $opts 1] == "noremote"} {
set str [join $opts]
if ![double_check_noremote] {
append_text "skipping: x11vnc $str"
return ""
} else {
append_text "running: x11vnc $str (please do \"Actions -> detach\" to clean things up)\n"
append_text "subsequent -R/-Q commands should fail..."
}
}
set cmd ""
lappend cmd $x11vnc_prog;
if {$x11vnc_xdisplay != ""} {
lappend cmd "-display"
lappend cmd $x11vnc_xdisplay
}
lappend cmd "-sync"
foreach word $opts {
lappend cmd $word
}
lappend cmd "2>"
lappend cmd "/dev/null"
if {0} {
set str [join $cmd]
puts "running: $str"
foreach word $cmd {
puts " word: $word"
}
}
set output ""
menus_disable
stop_watch on
catch {set output [eval exec $cmd]}
stop_watch off
menus_enable
if {$debug} {
if {[string length $output] > 100} {
set str [string range $output 0 100]
append_text "output: $str ...\n"
} else {
append_text "output: $output\n"
}
}
return $output
}
proc try_connect_and_query_all {{n 2}} {
for {set i 0} {$i < $n} {incr i} {
if {$i > 0} {
after 500
append_text "trying again ...\n"
}
if {[try_connect]} {
query_all
break
}
}
}
proc try_connect {} {
global x11vnc_xdisplay connected_to_x11vnc reply_xdisplay
global menu_var unset_str
if {! $connected_to_x11vnc} {
if {[info exists menu_var(display)]} {
set d $menu_var(display)
if {$d != "" && $d != $unset_str && $d != $x11vnc_xdisplay} {
set x11vnc_xdisplay $menu_var(display)
append_text "Setting X display to: $x11vnc_xdisplay\n"
}
}
}
set_info "Pinging $x11vnc_xdisplay ..."
set rargs [list "-Q" "ping"]
set result [run_remote_cmd $rargs]
if {[regexp {^ans=ping:} $result]} {
regsub {^ans=ping:} $result {} reply_xdisplay
set msg "Connected to $reply_xdisplay"
set_info $msg
append_text "$msg\n"
set_connected yes
fetch_displays
return 1
} else {
set str "x11vnc server."
if {$x11vnc_xdisplay != ""} {
set str $x11vnc_xdisplay
}
set msg "No reply from $str"
set_info $msg
append_text "$msg\n"
set_connected no
return 0
}
}
############################################################################
# main:
global env x11vnc_prog x11vnc_cmdline x11vnc_xdisplay x11vnc_connect;
global helpall helptext helpremote helplabel hostname;
global all_settings reply_xdisplay always_update
global max_text_height max_text_width
global menu_var unset_str menus_disabled
global bfont ffont old_labels
global connected_to_x11vnc
global delay_sleep extra_sleep extra_sleep_split
global cache_all_query_vars
set unset_str "(unset)"
set connected_to_x11vnc 0
set menus_disabled 0
set max_text_height 40
set max_text_width 90
set bfont "-adobe-helvetica-bold-r-*-*-*-120-*-*-*-*-*-*"
set ffont "fixed"
set help_indent 24;
set reply_xdisplay ""
set all_settings "None so far."
set always_update 1
set cache_all_query_vars ""
# these are no longer used under x11vnc -sync:
set delay_sleep 350
set extra_sleep 1000
set extra_sleep_split 4
if {[regexp {^[34]} $tk_version] || $tk_version == "8.0"} {
set old_labels 1
} else {
set old_labels 0
}
if {"$argv" == "-spit"} {
set fh [open $argv0 r]
puts "/*"
puts " * tkx11vnc.h: generated by 'tkx11vnc -spit'"
puts " * Abandon all hope, ye who enter here..."
puts " * ...edit tkx11vnc instead."
puts " */"
puts " char gui_code\[\] ="
while {[gets $fh line] > -1} {
regsub -all {\\} $line {\\\\} line
regsub -all {"} $line {\\"} line
puts "\"$line\\n\""
}
close $fh
puts ";"
exit 0
}
# Read environment for clues:
if {[info exists env(X11VNC_PROG)]} {
set x11vnc_prog $env(X11VNC_PROG);
} else {
set x11vnc_prog "x11vnc";
}
if {[info exists env(X11VNC_CMDLINE)]} {
set x11vnc_cmdline $env(X11VNC_CMDLINE);
} else {
set x11vnc_cmdline "";
}
if {[info exists env(X11VNC_CONNECT)]} {
set x11vnc_connect 1
} else {
set x11vnc_connect 0;
}
if {[info exists env(X11VNC_XDISPLAY)]} {
set x11vnc_xdisplay $env(X11VNC_XDISPLAY);
set x11vnc_connect 1
} elseif {$argv != "" && [regexp {:[0-9]} $argv]} {
set x11vnc_xdisplay "$argv"
set x11vnc_connect 1
} elseif {[info exists env(DISPLAY)]} {
set x11vnc_xdisplay $env(DISPLAY);
} else {
set x11vnc_xdisplay ":0";
}
set hostname [exec uname -n]
#puts [exec env]
#puts "x11vnc_xdisplay: $x11vnc_xdisplay"
set env(X11VNC_STD_HELP) 1
# scrape the help output for the text and remote control vars:
parse_help;
parse_remote_help;
parse_query_help;
# tweaks to duplicate help text:
tweak_remote_help lock deny
tweak_remote_help unlock deny
tweak_both quiet q
tweak_help logfile o
tweak_both xwarppointer xwarp
tweak_both screen_blank sb
set_template
wm title . "tkx11vnc"
make_widgets;
menu_bindings;
key_bindings;
if {$x11vnc_connect} {
try_connect_and_query_all
}
set_widgets
# main loop.