You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
mlt/docs/inigo.txt

379 lines
12 KiB

Inigo Documentation
Copyright (C) 2004 Ushodaya Enterprised Limited
Author: Charles Yates <charles.yates@pandora.be>
Last Revision: 2004-03-20
INIGO
-----
Preamble:
inigo was developed as a test tool for the MLT framework. It can be thought
of as a powerful, if somewhat obscure, multitrack command line oriented
video editor.
The following details the usage of the tool and as a result, provides a lot
of insight into the workings of the MLT framework.
Usage:
inigo [ -group [ name=value ]* ]
[ -consumer id[:arg] [ name=value ]* ]
[ -filter filter[:arg] [ name=value ] * ]
[ -attach filter[:arg] [ name=value ] * ]
[ -mix length [ -mixer transition ]* ]
[ -transition id[:arg] [ name=value ] * ]
[ -blank frames ]
[ -track ]
[ -split relative-frame ]
[ -join clips ]
[ -repeat times ]
[ producer [ name=value ] * ]+
General rules:
1. Order is incredibly important;
2. Error checking on command line parsing is weak;
3. Please refer to services.txt for details on services available;
4. The MLT framework, from which inigo has inherited its naming convention,
is very mlt-centric. Producers produce MLT frame objects and consumers
consume MLT frame objects. The distinction is important - a DV producer
does not produce DV, it produces MLT frames from a DV source, and similarly
a DV consumer does not consume DV, it consumes MLT frames and produces DV
frames.
Terminology:
'Producers' typically refer to files but may also indicate devices (such as
dv1394 input or video4linux). Hence, the more generic term is used [the more
generic usage is out of scope for now...].
'Filters' are frame modifiers - they always guarantee that for every frame
they receive, they output *precisely* one frame. Never more, never less,
ever. Nothing says that a filter cannot generate frames though
'Transitions' collect frames from two tracks (a and b) and output 1
modified frame on their 'a track', and 1 unmodified frame on their 'b track'.
Never more, never less, ever.
'Consumers' collect frames from a producer, do something with them and
destroy them.
Collectively, these are known as 'services'.
All services have 'properties' associated to them. These are typically
defaulted or evaluated and may be overriden on a case by case basis.
All services except consumers obey in and out properties.
Consumers have no say in the flow of frames [though they may give the
illusion that they do]. They get frames from a connected producer, use them,
destroy them and get more.
Basics:
To play a file with the default SDL PAL consumer, usage is:
$ inigo file
Note that 'file' can be anything that inigo has a known 'producer' mapping
for (so this can be anything from .dv to .txt).
You can also specify the producer directly, for example:
$ inigo avformat:file.mpeg
Would force the direct use of avformat for loading the file.
Properties:
Properties can be assigned to the producer by adding additional name=value
pairs after the producer:
$ inigo file in=50 out=100 something="something else"
Note that while some properties have meaning to all producers (for example:
in, out and length are guaranteed to be valid for all, though typically,
length is determined automatically), the validity of others are dependent on
the producer - however, properties will always be assigned and silently
ignored if they won't be used.
Multiple Files:
Multiple files of different types can be used:
$ inigo a.dv b.mpg c.png
Properties can be assigned to each file:
$ inigo a.dv in=50 out=100 b.mpg out=500 c.png out=500
MLT will take care of 'normalising' the output of a producer to ensure
that the consumer gets what it needs. So, in the case above, the mlt
framework will ensure that images are rescaled and audio resampled to meet
the requirements of your configuration (which, by default, will be PAL).
See 'Appendix A: Normalisation Rules' below.
Filters:
Filters are frame modifiers - they can change the contents of the audio or
the images associated to a frame.
$ inigo a.dv -filter greyscale
As with producers, properties may be specified on filters too.
Again, in and out properties are common to all, so to apply a filter to a
range of frames, you would use something like:
$ inigo a.dv -filter greyscale in=0 out=50
Again, filters have their own set of rules about properties and will
silently ignore properties that do not apply.
Groups:
The -group switch is provided to force default properties on the following
'services'. For example:
$ inigo -group in=0 out=49 clip*
would play the first 50 frames of all clips that match the wild card
pattern.
Note that the last -group settings also apply to the following filters,
transitions and consumers, so:
$ inigo -group in=0 out=49 clip* -filter greyscale
is *probably not* what you want (ie: the greyscale filter would only be
applied to the first 50 frames).
To shed the group properties, you can use any empty group:
$ inigo -group in=0 out=49 clip* -group -filter greyscale
Attached Filters:
As described above, the -filter switch applies filters to an entire track. To
localise filters to a specific clip on a track, you have to know information
about the lengths of the clip and all clips leading up to it. In practise,
this is horrifically impractical, especially at a command line level (and not
even that practical from a programing point of view...).
The -attach family of switches simplify things enormously. By default, -attach
will attach a filter to the last service created, so:
$ inigo clip1.dv clip2.dv -attach greyscale clip3.dv
would only apply the filter to clip2.dv. You can further narrow down the area of
the effect by specifying in/out points on the attached filter.
This might seem simple so far, but there is a catch... consider the following:
$ ingo clip1.dv -attach watermark:+hello.txt -attach invert
The second attached filter is actually attached to the watermark. You might
think, yay, nice (and it is :-)), but, it might not be what you want. For example
you might want to attach both to clip1.dv. To do that, you can use:
$ ingo clip1.dv -attach-cut watermark:+hello.txt -attach-cut invert
As you shall see below, there are still another couple of gotchas associated to
-attach, and even another variant :-).
Mixes:
The -mix switch provides the simplest means to introduce transitions between
adjacent clips.
For example:
$ inigo clip1.dv clip2.dv -mix 25 -mixer luma -mixer mix:-1
would provide both an audio and video transition between clip1 and clip2.
This functionality supercedes the enforced use of the -track and -transition
switches from earlier versions of inigo and makes life a lot easier :-).
These can be used in combination, so you can for example do a fade from black
and to black using the following:
$ inigo colour:black out=24 clip1.dv -mix 25 -mixer luma \
colour:black out=24 -mix 25 -mixer luma
while this may not be immediately obvious, consider what's happening as the
command line is being parsed from left to right:
Input: Track
----------------------- -----------------------------------------------------
colour:black out=24 [black]
clip1.dv [black][clip1.dv]
-mix 25 [black+clip1.dv][clip1.dv]
-mixer luma [luma:black+clip1.dv][clip1.dv]
colour:black out=24 [luma:black+clip1.dv][clip1.dv][black]
-mix 25 [luma:black+clip1.dv][clip1.dv][clip1.dv+black]
-mixer luma [luma:black+clip1.dv][clip1.dv][luma:clip1.dv+black]
Obviously, the clip1.dv instances refer to different parts of the clip, but
hopefully that will demonstrate what happens as we construct the track.
You will find more details on the mix in the framework.txt.
Mix and Attach:
As noted, -attach normally applies to the last created service - so, you can
attach a filter to the transition region using:
$ inigo clip1.dv clip2.dv -mix 25 -mixer luma -attach watermark:+Transition.txt
Again, nice, but take care - if you want the attached filter to be associated
to the region following the transition, use -attach-cut instead.
Splits, Joins, Removes and Swaps:
COMPLEX - needs simplification....
Introducing Tracks and Blanks:
So far, all of the examples have shown the definition of a single
playlist, or more accurately, track.
When multiple tracks exist, the consumer will receive a frame
from the 'highest numbered' track that is generating a non-blank
frame.
It is best to visualise a track arrangement, so we'll start with
an example:
$ inigo a.dv -track b.dv in=0 out=49
This can be visualised as follows:
+------------------+
|a |
+-------+----------+
|b |
+-------+
Playout will show the first 50 frames of b and the 51st frame shown will be
the 51st frame of a.
This rule also applies to audio only producers on the second track, for
example, the following would show the video from the a track, but the audio
would come from the second track:
$ inigo a.dv -track b.mp3 in=0 out=49
To have the 51st frame be the first frame of b, we can use the -blank switch:
$ inigo a.dv out=49 -track -blank 49 b.dv
Which we can visualise as:
+-------+
|a |
+-------+-------------------+
|b |
+-------------------+
Now playout will continue as though a and b clips are on the
same track (which on its own, is about as useful as reversing the
process of slicing bread).
Transitions:
Where tracks become useful is in the placing of transitions.
Here we need tracks to overlap, so a useful multitrack
definition could be given as:
$ inigo a.dv out=49 \
-track \
-blank 24 b.dv \
-transition luma in=25 out=49 a_track=0 b_track=1
Now we're cooking - our visualisation would be something like:
+-------+
|a |
+---+---+--------------+
|b |
+------------------+
Playout will now show the first 25 frames of a and then a fade
transition for 25 frames between a and b, and will finally
playout the remainder of b.
Reversing a Transition:
When we visualise a track definition, we also see situations
like:
+-------+ +----------+
|a1 | |a2 |
+---+---+--------------+----+-----+
|b |
+-----------------------+
In this case, we have two transitions, a1 to b and b to a2.
In this scenario, we define a command line as follows:
$ inigo a.dv out=49 -blank 49 a2.dv \
-track \
-blank 24 b.dv out=99 \
-transition luma in=25 out=49 a_track=0 b_track=1 \
-transition luma in=100 out=124 reverse=1 a_track=0 b_track=1
Serialisation:
Inigo has a built in serialisation mechanism - you can build up
your command, test it via any consumer and then add a -serialise
file.inigo switch to save it.
The saved file can be subsequently used as a clip by either
miracle or inigo. Take care though - paths to files are saved as
provided on the command line....
A more expressive serialisation can be obtained with the westley consumer
- this will provide an xml document which can be used freely in inigo and
miracle.
See westley.txt for more information.
Missing Features:
Some filters/transitions should be applied on the output frame regardless
of which track it comes from - for example, you might have a 3rd text
track or a watermark which you want composited on every frame, and of
course, there's the obscure filter....
inigo only supports this in two invocations - as a simple example:
$ inigo a.dv -track -blank 100 b.dv -consumer westley:basic.westley
$ inigo basic.westley -filter watermark:watermark.png