tde-i18n/tde-i18n-zh_TW/messages/tdenetwork/kcmlanbrowser.po

# translation of kcmlanbrowser.po to Chinese Traditional
# Traditional Chinese Translation of atlantik
# Copyright (C) 2002, 2006 Free Software Foundation, Inc.
#
# tonniewalker <tonniewalker@hotmail.com>, 2002.
# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
msgid ""
msgstr ""
"Project-Id-Version: kcmlanbrowser\n"
"POT-Creation-Date: 2005-08-10 10:18+0200\n"
"PO-Revision-Date: 2006-06-19 12:55+0800\n"
"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
"dot tw>\n"
"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.2\n"

#: setupwizard.cpp:63
msgid "LISa Network Neighborhood Setup"
msgstr "LISa 網路芳鄰設定"

#: setupwizard.cpp:71 setupwizard.cpp:512
msgid "Advanced Settings"
msgstr "進階設定"

#: setupwizard.cpp:126
msgid ""
"<qt>"
"<p>This wizard will ask you a few questions about your network.</p> "
"<p>Usually you can simply keep the suggested settings.</p> "
"<p>After you have finished the wizard, you will be able to browse and use "
"shared resources on your LAN, not only Samba/Windows shares, but also FTP, HTTP "
"and NFS resources exactly the same way.</p> "
"<p>Therefore you need to setup the <i>LAN Information Server</i> "
"(LISa) on your machine. Think of the LISa server as an FTP or HTTP server; it "
"has to be run by root, it should be started during the boot process and only "
"one LISa server can run on one machine.</qt>"
msgstr ""
"<qt>"
"<p>這個精靈將會問您一點點關於您網路的問題。</p>"
"<p>通常您可以簡單地保留建議設定。</p>"
"<p>在您結束這個精靈之後，您將可以瀏覽並且使用在您區域網路上分享的資源，不只是 Samba/Windows 的分享，還有 FTP, HTTP 和 NFS "
"的資源。</p>"
"<p>因此您需要在您的機器上設定<i>區域網路資訊伺服器</i>(LISa)。將 LISa 當作像是 FTP 或 HTTP 伺服器一樣，它可以以 root "
"身份來執行，它應該在 boot 時期被啟動，並且一部機器只跑一個 LISa server 。</p></qt>"

#: setupwizard.cpp:149
msgid ""
"<qt>"
"<p>More than one network interface card was found on your system.</p>"
"<p>Please choose the one to which your LAN is connected.</p></qt>"
msgstr "<qt><p>在您的機器上發現超過一張以上的網路卡。</p><p>請選擇您的區域網路有連結的那一張。</p></qt>"

#: setupwizard.cpp:164
msgid ""
"<qt>"
"<p><b>No network interface card was found on your system.</b></p>"
"<p>Possible reason: no network card is installed. You probably want to cancel "
"now or enter your IP address and network manually</p>Example: <code>"
"192.168.0.1/255.255.255.0</code>.</qt>"
msgstr ""
"<qt>"
"<p><b>在您的機器上沒有發現網路卡。</b></p>"
"<p>可能的理由：沒有安裝網路卡。您現在也許想要離開，或是手動地輸入您的 IP 位址和網路設定。</p>例如：<code>"
"192.168.0.1/255.255.255.0</code>。</qt>"

#: setupwizard.cpp:185
msgid "There are two ways LISa can search hosts on your network."
msgstr "LISa 在您的網路上有兩個可以搜尋主機的方法。"

#: setupwizard.cpp:187
msgid "Send pings"
msgstr "送出 pings"

#: setupwizard.cpp:188
msgid ""
"All hosts with TCP/IP will respond,"
"<br>whether or not they are samba servers."
"<br>Don't use it if your network is very large, i.e. more than 1000 hosts."
"<br>"
msgstr ""
"所有 TCP/IP 的主機將回應，"
"<br> 不論他們是否是 samba 伺服器。"
"<br> 如果您的網路非常大，例如，超過 1000 台主機，請不要使用。"
"<br>"

#: setupwizard.cpp:191
msgid "Send NetBIOS broadcasts"
msgstr "送出 NetBIOS 廣播"

#: setupwizard.cpp:192
msgid ""
"You need to have the samba package (nmblookup) installed."
"<br>Only samba/windows servers will respond."
"<br>This method is not very reliable."
"<br>You should enable it if you are part of a large network."
msgstr ""
"您需要安裝 samba 套件(nmblookup)。"
"<br> 只有 samba/windows 伺服器會回應。"
"<br> 這個方法並不十分可靠。"
"<br> 但是如果您所在的網路很大，您應該用此選項。"

#: setupwizard.cpp:201 setupwizard.cpp:227 setupwizard.cpp:249
#: setupwizard.cpp:269 setupwizard.cpp:295 setupwizard.cpp:340
msgid "<b>If unsure, keep it as is.</b>"
msgstr "<b>如果不確定，保持原狀。</b>"

#: setupwizard.cpp:210
msgid ""
"All IP addresses included in the specified range will be pinged."
"<br>If you are part of a small network, e.g. with network mask 255.255.255.0"
"<br>use your IP address/network mask."
"<br>"
msgstr ""
"所有包含在指定範圍內的 IP 位址將會被測試。"
"<br> 如果您是一個小型網路的一部分，例如，網路遮罩為 255.255.255.0，"
"<br> 則請使用您的 IP 位址/網路遮罩。"
"<br>"

#: setupwizard.cpp:215
msgid ""
"<br>There are four ways to specify address ranges:"
"<br>1. IP address/network mask, like <code>192.168.0.0/255.255.255.0;</code>"
"<br>2. single IP addresses, like <code>10.0.0.23;</code>"
"<br>3. continuous ranges, like <code>10.0.1.0-10.0.1.200;</code>"
"<br>4. ranges for each part of the address, like <code>"
"10-10.1-5.1-25.1-3;</code>"
"<br>You can also enter combinations of 1 to 4, separated by \";\", like"
"<br><code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;</code>"
"<br>"
msgstr ""
"<br>有四個方法來指定位址範圍："
"<br> 1. IP 位址/網路遮罩，像是<code>192.168.0.0/255.255.255.0</code>。"
"<br> 2. 單一 IP 位址，像是<code>10.0.0.23</code>。"
"<br> 3. 連續的範圍，例如<code>10.0.1.0-10.0.1.200</code>。"
"<br> 4. 位址每個部份的範圍，像是<code>10-10.1-5.1-25.1-3</code>。"
"<br> 您也可以輸入 1 到 4 的組合，使用\";\"分開，"
"<br> 像是<code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100</code>"
"<br>"

#: setupwizard.cpp:236
msgid ""
"This is a security related setting."
"<br>It provides a simple IP address based way to specify \"trusted\" hosts."
"<br>Only hosts which fit into the addresses given here are accepted by LISa as "
"clients. The list of hosts published by LISa will also only contain hosts which "
"fit into this scheme."
"<br>Usually you enter your IP address/network mask here."
msgstr ""
"這是一個安全相關的設定。"
"<br>它提供一個簡易的以 IP 位址為基礎的方式來指定\"被信任的\"主機。"
"<br>只有這裡提供的合適位址才會被客戶端的 LISa 所接受。由 LISa 所發佈的主機列表也只包含適合這項計劃的主機。"
"<br>通常您可在這兒輸入您的 IP 位址/網路遮罩。"

#: setupwizard.cpp:258
msgid ""
"<br>Enter your IP address and network mask here, like <code>"
"192.168.0.1/255.255.255.0</code>"
msgstr "<br>在這兒輸入您的 IP 位址和網路遮罩，像是<code>192.168.0.1/255.255.255.0</code>"

#: setupwizard.cpp:261
msgid ""
"<br>To reduce the network load, the LISa servers in one network"
"<br>cooperate with each other. Therefore you have to enter the broadcast"
"<br>address here. If you are connected to more than one network, choose "
"<br>one of the broadcast addresses."
msgstr ""
"<br>為了減少網路負載，在網路上的 LISa 伺服器"
"<br>會彼此合作。因此您可以在此輸入廣播位址。"
"<br>如果您連結一個以上的網路，請選則其中一個"
"<br>廣播位址。"

#: setupwizard.cpp:280
msgid ""
"<br>Enter the interval after which LISa, if busy, will update its host list."
msgstr "<br>輸入當 LISa 忙碌時，下一次更新主機列表的時間間隔。"

#: kcmlisa.cpp:138 kcmreslisa.cpp:100 setupwizard.cpp:284
msgid " sec"
msgstr " 秒"

#: setupwizard.cpp:286
msgid ""
"<br>Please note that the update interval will grow automatically by up to 16 "
"times the value you enter here, if nobody accesses the LISa server. So if you "
"enter 300 sec = 5 min here, this does not mean that LISa will ping your whole "
"network every 5 minutes. The interval will increase up to 16 x 5 min = 80 min."
msgstr ""
"<br>請注意，若是都沒有人去存取 LISa 伺服器，更新間隔會自動拉大到您所輸入數值的十六倍。若是您輸入 300 秒（五分鐘），這並不表示 LISa "
"會每五分鐘 ping 一次您的網路。最大可能會 5x16=80 分鐘才會 ping 一次。"

#: setupwizard.cpp:305
msgid ""
"This page contains several settings you usually only"
"<br>need if LISa doesn't find all hosts in your network."
msgstr "如果 LISa 無法在您的網路上發現所有主機，<br>本頁包含一些您需要的設定。"

#: setupwizard.cpp:308
msgid "Re&port unnamed hosts"
msgstr "回覆未命名的主機(&P)"

#: setupwizard.cpp:309
msgid ""
"Should hosts for which LISa can't resolve the name be included in the host "
"list?"
"<br>"
msgstr "LISa 無法分析的主機名稱的主機，該被包含在主機列表裡嗎？<br>"

#: setupwizard.cpp:313
msgid "Wait for replies after first scan"
msgstr "等待第一次掃描後的回覆"

#: kcmlisa.cpp:147 kcmlisa.cpp:153 kcmreslisa.cpp:109 kcmreslisa.cpp:115
#: setupwizard.cpp:315 setupwizard.cpp:333
msgid " ms"
msgstr " 毫秒"

#: setupwizard.cpp:316
msgid ""
"How long should LISa wait for answers to pings?"
"<br>If LISa doesn't find all hosts, try to increase this value."
"<br>"
msgstr "LISa 應該等待 ping 的結果多久？<br> 如果 LISa 無法發現所有的主機，試著增加這個值。<br>"

#: setupwizard.cpp:320
msgid "Max. number of pings to send at once"
msgstr "同時送出 ping 封包的數字"

#: setupwizard.cpp:323
msgid ""
"How many ping packets should LISa send at once?"
"<br>If LISa doesn't find all hosts you could try to decrease this value."
"<br>"
msgstr "LISa 應該同時送出多少的 ping 封包？<br> 如果 LISa 無法發現所有的主機，試著減少這個值。<br>"

#: setupwizard.cpp:326
msgid "Al&ways scan twice"
msgstr "總是掃描兩次(&W)"

#: setupwizard.cpp:330
msgid "Wait for replies after second scan"
msgstr "等待第二次掃描後的回覆"

#: setupwizard.cpp:334
msgid "If LISa doesn't find all hosts, enable this option."
msgstr "如果 LISa 無法發現所有的主機，試著開啟這個選項。"

#: setupwizard.cpp:350
msgid ""
"<br>Your LAN browsing has been successfully set up."
"<br>"
"<br>Make sure that the LISa server is started during the boot process. How this "
"is done depends on your distribution and OS. Usually you have to insert it "
"somewhere in a boot script under <code>/etc</code>."
"<br>Start the LISa server as root and without any command line options."
"<br>The config file will now be saved to <code>/etc/lisarc</code>."
"<br>To test the server, try <code>lan:/</code> in Konqueror."
"<br>"
"<br>If you have problems or suggestions, visit "
"http://lisa-home.sourceforge.net."
msgstr ""
"<br>成功地建立了您的區域網路瀏覽。"
"<br>"
"<br>請確定lisa 伺服器已在 boot 過程中被啟動。如何完成啟動端視您的版本和作業系統。通常您必需在<code>/etc</code>"
"下的 boot script 的某處插入設定。"
"<br>以 root 身份啟動 lisa 伺服器，並且不要其它的命令列選項。"
"<br>設定檔將被儲存於<code>/etc/lisarc</code>。"
"<br>然後像在 Konqueror 中試試<code>lan:/</code>並且祝玩得愉快！:-)"
"<br>"
"<br>如果您有任何問題或建議，請參觀 http://lisa-home.sourceforge.net 。"

#: setupwizard.cpp:437
msgid "Congratulations!"
msgstr "恭喜！"

#: setupwizard.cpp:462
msgid "You can use the same syntax as on the previous page.<br>"
msgstr "您可以使用如同上一頁的相同語法。<br>"

#: setupwizard.cpp:464
msgid ""
"There are three ways to specify IP addresses:"
"<br>1. IP address/network mask, like<code> 192.168.0.0/255.255.255.0;</code>"
"<br>2. continuous ranges, like<code> 10.0.1.0-10.0.1.200;</code>"
"<br>3. single IP addresses, like<code> 10.0.0.23;</code>"
"<br>You can also enter combinations of 1 to 3, separated by \";\", "
"<br>like<code> 192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100;</code>"
"<br>"
msgstr ""
"這裡有三個方法去指定 IP 位址："
"<br> 1. IP 位址/網路遮罩，像是<code>192.168.0.0/255.255.255.0</code>。"
"<br> 2. 連續範圍，像是<code> 10.0.1.0-10.0.1.200</code>。"
"<br> 3. 單一 IP 位址，像是<code> 10.0.0.23</code>。"
"<br> 您也可以輸入 1 到 3 的組合，其中以\";\"隔開"
"<br> 像是<code>192.168.0.0/255.255.255.0;10.0.0.0;10.0.1.1-10.0.1.100</code>。"
"<br>"

#: setupwizard.cpp:490
msgid "Multiple Network Interfaces Found"
msgstr "發現多個網路介面"

#: setupwizard.cpp:493
msgid "No Network Interface Found"
msgstr "沒有發現網路介面"

#: setupwizard.cpp:498
msgid "Specify Search Method"
msgstr "指定搜尋方式"

#: setupwizard.cpp:501
msgid "Specify Address Range LISa Will Ping"
msgstr "指定位址範圍給 LISa 檢測"

#: setupwizard.cpp:504
msgid "\"Trusted\" Hosts"
msgstr "\"可信賴的\"主機"

#: setupwizard.cpp:507
msgid "Your Broadcast Address"
msgstr "您的廣播位址"

#: setupwizard.cpp:510
msgid "LISa Update Interval"
msgstr "LISa 更新時間間隔"

#: kcmlisa.cpp:63
msgid "Tell LISa Daemon How to Search for Hosts"
msgstr "告訴 LISa 如何搜尋主機"

#: kcmlisa.cpp:66
msgid "Send &NetBIOS broadcasts using nmblookup"
msgstr "使用 nmblookup 送出 NetBIOS 廣播(&N)"

#: kcmlisa.cpp:67 kcmreslisa.cpp:63
msgid "Only hosts running SMB servers will answer"
msgstr "只有執行 smb 伺服器的主機會回應"

#: kcmlisa.cpp:69
msgid "Send &pings (ICMP echo packets)"
msgstr "送出 ping 封包（ICMP 回應封包）(&P)"

#: kcmlisa.cpp:70
msgid "All hosts running TCP/IP will answer"
msgstr "所有執行 TCP/IP 的主機都會回應"

#: kcmlisa.cpp:77
msgid "To these &IP addresses:"
msgstr "掃描這些位址(&I)："

#: kcmlisa.cpp:78
msgid ""
"Enter all ranges to scan, using the format "
"'192.168.0.1/255.255.255.0;10.0.0.1;255.0.0.0'"
msgstr "輸入所有掃描的範圍，使用的格式為 '192.168.0.1/255.255.255.255.0;10.0.0.1;255.0.0.0'。"

#: kcmlisa.cpp:88
msgid "&Broadcast network address:"
msgstr "廣播網路位址(&B)："

#: kcmlisa.cpp:89
msgid "Your network address/subnet mask (e.g. 192.168.0.0/255.255.255.0;)"
msgstr "您的網路位址/子網路遮罩（例如：192.168.0.0/255.255.255.0）。"

#: kcmlisa.cpp:96
msgid "&Trusted IP addresses:"
msgstr "被信任的位址(&T)："

#: kcmlisa.cpp:97 kcmreslisa.cpp:71
msgid ""
"Usually your network address/subnet mask (e.g. 192.168.0.0/255.255.255.0;)"
msgstr "您的通常網路位址/子網路遮罩（例如：192.168.0.0/255.255.255.0）。"

#: kcmlisa.cpp:110
msgid "Setup Wizard..."
msgstr "設定精靈..."

#: kcmlisa.cpp:113 kcmreslisa.cpp:80
msgid "&Suggest Settings"
msgstr "建議設定(&S)"

#: kcmlisa.cpp:117
msgid "Ad&vanced Settings..."
msgstr "進階設定(&V)..."

#: kcmlisa.cpp:119
msgid "Advanced Settings for LISa"
msgstr "LISa 的進階設定"

#: kcmlisa.cpp:124
msgid "&Additionally Check These Hosts"
msgstr "另外檢驗這些的主機(&A)"

#: kcmlisa.cpp:126
msgid "The hosts listed here will be pinged"
msgstr "列在這裡的主機也會被檢驗"

#: kcmlisa.cpp:130 kcmreslisa.cpp:92
msgid "Show &hosts without DNS names"
msgstr "不以 DNS 名稱顯示主機(&H)"

#: kcmlisa.cpp:135 kcmreslisa.cpp:97
msgid "Host list update interval:"
msgstr "主機清單更新間隔："

#: kcmlisa.cpp:136 kcmlisa.cpp:139 kcmreslisa.cpp:98 kcmreslisa.cpp:101
msgid "Search hosts after this number of seconds"
msgstr "在幾秒後搜尋主機"

#: kcmlisa.cpp:141 kcmreslisa.cpp:103
msgid "Always check twice for hosts when searching"
msgstr "搜尋時檢查主機兩次"

#: kcmlisa.cpp:144 kcmreslisa.cpp:106
msgid "Wait for replies from hosts after first scan:"
msgstr "等待第一次掃描後的回覆："

#: kcmlisa.cpp:145 kcmlisa.cpp:148 kcmlisa.cpp:151 kcmlisa.cpp:154
#: kcmreslisa.cpp:107 kcmreslisa.cpp:110 kcmreslisa.cpp:113 kcmreslisa.cpp:116
msgid "How long to wait for replies to the ICMP echo requests from hosts"
msgstr "花多久的時間等待主機的 ICMP 回應要求的結果"

#: kcmlisa.cpp:150 kcmreslisa.cpp:112
msgid "Wait for replies from hosts after second scan:"
msgstr "等待第二次掃描後的回覆："

#: kcmlisa.cpp:156 kcmreslisa.cpp:118
msgid "Max. number of ping packets to send at once:"
msgstr "同時送出 ping 封包的數字："

#: kcmlisa.cpp:301
msgid "Saving the results to %1 failed."
msgstr "儲存結果至 %1 失敗。"

#: kcmlisa.cpp:310
msgid "No network interface cards found."
msgstr "沒有發現網路介面。"

#: kcmlisa.cpp:332 kcmreslisa.cpp:232
msgid ""
"You have more than one network interface installed."
"<br>Please make sure the suggested settings are correct."
"<br>"
"<br>The following interfaces were found:"
"<br>"
"<br>"
msgstr "您安裝了一個以上的網路介面。<br> 請確定建議的設定值是正確的。<br><br> 發現以下的介面：<br><br>"

#: kcmlisa.cpp:381
msgid ""
"The configuration has been saved to /etc/lisarc.\n"
"Make sure that the LISa daemon is started,\n"
" e.g. using an init script when booting.\n"
"You can find examples and documentation at http://lisa-home.sourceforge.net ."
msgstr ""
"設定已被儲存到 /etc/lisarc。\n"
"請確定 LISa 守護程式在開機時已經啟動。\n"
"您可以在 http://lisa-home.sourceforge.net 中找到範例與說明文件。"

#: kcmreslisa.cpp:59
msgid "Tell ResLISa Daemon How to Search for Hosts"
msgstr "告訴 ResLISa 守護程式如何搜尋主機"

#: kcmreslisa.cpp:62
msgid "Send &NetBIOS broadcasts using &nmblookup"
msgstr "使用 nmblookup 送出 NetBIOS 廣播來(&N)"

#: kcmreslisa.cpp:65
msgid "A&dditionally Check These Hosts"
msgstr "另外檢驗這些主機(&D)"

#: kcmreslisa.cpp:66
msgid "The hosts listed here will be pinged."
msgstr "列在這裡的主機也會被檢驗。"

#: kcmreslisa.cpp:70
msgid "&Trusted addresses:"
msgstr "被信任的位址(&T)："

#: kcmreslisa.cpp:77
msgid "Use &rlan:/ instead of lan:/ in Konqueror's navigation panel"
msgstr "在 Konqueror 的導覽面板中使用 rlan:/ 而不是 lan:/ (&R)。"

#: kcmreslisa.cpp:84
msgid "Ad&vanced Settings"
msgstr "進階設定(&V)"

#: kcmreslisa.cpp:87
msgid "Advanced Settings for ResLISa"
msgstr "ResLISa 進階設定"

#: kcmreslisa.cpp:214
msgid ""
"It appears you do not have any network interfaces installed on your system."
msgstr "您似乎沒有安裝任何網路介面裝置在您的系統上。"

#: kcmreslisa.cpp:242
msgid ""
"The ResLISa daemon is now configured correctly, hopefully."
"<br>Make sure that the reslisa binary is installed <i>suid root</i>."
msgstr "希望 ResLISa 守護程式現在已經被正確地設定了。<br> 請確定 reslisa 執行檔已裝好並設定為 suid root。"

#: kcmkiolan.cpp:41
msgid "Show Links for Following Services"
msgstr "顯示以下服務的連結"

#: kcmkiolan.cpp:43
msgid "FTP (TCP, port 21): "
msgstr "FTP (TCP, port 21)："

#: kcmkiolan.cpp:44
msgid "HTTP (TCP, port 80): "
msgstr "HTTP (TCP, port 80)："

#: kcmkiolan.cpp:45
msgid "NFS (TCP, port 2049): "
msgstr "NFS (TCP, port 2049)："

#: kcmkiolan.cpp:46
msgid "Windows shares (TCP, ports 445 and 139):"
msgstr "SMB (TCP, port 139 與 445)："

#: kcmkiolan.cpp:47
msgid "Secure Shell/Fish (TCP, port 22): "
msgstr "SSH/Fish (TCP, port 22)："

#: kcmkiolan.cpp:48
msgid "Show &short hostnames (without domain suffix)"
msgstr "顯示簡短的主機名稱（不含網域）(&S)"

#: kcmkiolan.cpp:51
msgid "Default LISa server host: "
msgstr "預設的 LISa 伺服器主機："

#: portsettingsbar.cpp:33
msgid "Check Availability"
msgstr "檢驗有效性"

#: portsettingsbar.cpp:34
msgid "Always"
msgstr "永遠"

#: portsettingsbar.cpp:35
msgid "Never"
msgstr "永不"

#: findnic.cpp:107 findnic.cpp:174
msgid "Up"
msgstr "上"

#: findnic.cpp:109 findnic.cpp:176
msgid "Down"
msgstr "下"

#: findnic.cpp:112 findnic.cpp:280
msgid "Broadcast"
msgstr "廣播"

#: findnic.cpp:114 findnic.cpp:273
msgid "Point to Point"
msgstr "點對點"

#: findnic.cpp:117 findnic.cpp:287
msgid "Multicast"
msgstr "Multicast"

#: findnic.cpp:120 findnic.cpp:294
msgid "Loopback"
msgstr "Loopback"

#: findnic.cpp:122 findnic.cpp:134
msgid "Unknown"
msgstr "未知的"