# Simplified Chinese translation for knetworkconf messages.
# Copyright (C) 2006, Zhang Le
# This file is distributed under the same license as the tdebase package.
# Zhang Le <robert@thizgroup.com>, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: knetworkconf\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2014-11-05 10:17-0600\n"
"PO-Revision-Date: 2006-05-04 19:05+0800\n"
"Last-Translator: Zhang Le <robert@thizgroup.com>\n"
"Language-Team: zh_CN <i18n-translation@lists.linux.net.cn>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: knetworkconf.cpp:66
msgid "Could not load network configuration information."
msgstr "无法装入网络配置信息。"

#: knetworkconf.cpp:67
msgid "Error Reading Configuration File"
msgstr "读取配置文件时出错"

#: knetworkconf.cpp:118 knetworkconf.cpp:756
msgid "Enabled"
msgstr "已启用"

#: knetworkconf.cpp:128 knetworkconf.cpp:770
msgid "Disabled"
msgstr "已禁用"

#: knetworkconf.cpp:137 knetworkconf.cpp:304
msgid "Manual"
msgstr "手动"

#: knetworkconf.cpp:158
msgid ""
"The new configuration has not been saved.\n"
"Do you want to apply changes before quitting?"
msgstr ""
"新配置尚未保存。\n"
"您想在退出前应用更改吗？"

#: knetworkconf.cpp:159 knetworkconf.cpp:831 knetworkconf.cpp:850
msgid "New Configuration Not Saved"
msgstr "新配置尚未保存"

#: knetworkconf.cpp:206
msgid "Edit Server"
msgstr "编辑服务器"

#: knetworkconf.cpp:233
#, c-format
msgid "Configure Device %1"
msgstr "配置设备 %1"

#: knetworkconf.cpp:442
msgid "Could not open file '/etc/resolv.conf' for reading."
msgstr "无法打开文件“/etc/resolv.conf”进行读取。"

#: knetworkconf.cpp:443
msgid "Error Loading Config Files"
msgstr "装入配置文件时出错"

#: knetworkconf.cpp:590
msgid "The default Gateway IP address is invalid."
msgstr "默认网关的 IP 地址无效。"

#: kadddevicecontainer.cpp:129 kadddevicecontainer.cpp:132
#: kadddevicecontainer.cpp:135 kadddevicecontainer.cpp:138
#: kadddnsserverdlg.ui.h:42 kaddknownhostdlg.ui.h:25 knetworkconf.cpp:590
msgid "Invalid IP Address"
msgstr "无效的 IP 地址"

#: knetworkconf.cpp:681
msgid "Enabling interface <b>%1</b>"
msgstr "启用接口 <b>%1</b>"

#: knetworkconf.cpp:683
msgid "Disabling interface <b>%1</b>"
msgstr "禁用接口 <b>%1</b>"

#: knetworkconf.cpp:717
msgid ""
"Could not launch backend to change network device state. You will have to do it "
"manually."
msgstr "无法启动后端来更改网络设备状态。您需要手动完成。"

#: knetworkconf.cpp:738
msgid ""
"There was an error changing the device's state. You will have to do it "
"manually."
msgstr "更改设备状态时出错。您需要手动完成。"

#: knetworkconf.cpp:739
msgid "Could Not Change Device State"
msgstr "无法更改设备状态"

#: knetworkconf.cpp:830 knetworkconf.cpp:849
msgid ""
"The new configuration has not been saved.\n"
"Apply changes?"
msgstr ""
"新配置尚未保存。\n"
"应用更改吗？"

#. i18n: file kaddknownhostdlg.ui line 16
#: knetworkconf.cpp:867 rc.cpp:199
#, no-c-format
msgid "Add New Static Host"
msgstr "添加新静态主机"

#: knetworkconf.cpp:900
msgid "Edit Static Host"
msgstr "编辑静态主机"

#: knetworkconf.cpp:1038
msgid "Could not load the selected Network Profile."
msgstr "无法装入选中的网络配置文件。"

#: knetworkconf.cpp:1039
msgid "Error Reading Profile"
msgstr "读取配置文件时出错"

#: knetworkconf.cpp:1062
msgid "Create New Network Profile"
msgstr "创建新网络配置文件"

#: knetworkconf.cpp:1063
msgid "Name of new profile:"
msgstr "新配置文件名称："

#: knetworkconf.cpp:1092
msgid "There is already another profile with that name."
msgstr "已经存在同名的配置文件。"

#. i18n: file kadddevicedlg.ui line 44
#: rc.cpp:3
#, no-c-format
msgid "Configure Interface"
msgstr "配置接口"

#. i18n: file kadddevicedlg.ui line 64
#: rc.cpp:6
#, no-c-format
msgid "TCP/IP Address"
msgstr "TCP/IP 地址"

#. i18n: file kadddevicedlg.ui line 93
#: rc.cpp:9
#, no-c-format
msgid "dhcp"
msgstr "dhcp"

#. i18n: file kadddevicedlg.ui line 98
#: rc.cpp:12
#, no-c-format
msgid "bootp"
msgstr "bootp"

#. i18n: file kadddevicedlg.ui line 105
#: rc.cpp:15 rc.cpp:18
#, no-c-format
msgid "The boot protocol this network device should use"
msgstr "此网络设备应使用的启动协议"

#. i18n: file kadddevicedlg.ui line 133
#: rc.cpp:21
#, no-c-format
msgid "Manual:"
msgstr "手动："

#. i18n: file kadddevicedlg.ui line 136
#: rc.cpp:24
#, no-c-format
msgid "Use a static IP address. Use the fields below to enter the values"
msgstr "使用静态 IP 地址。使用下面的输入框输入值"

#. i18n: file kadddevicedlg.ui line 140
#: rc.cpp:27
#, no-c-format
msgid ""
"<p>Sets this interface to use static IP settings.</p>\n"
"<p>In this case, please use the fields below to enter the desired values "
"manually.</p>"
msgstr ""
"<p>将此设备设定为使用静态 IP 设置。</p>\n"
"<p>在这种情况下，请使用下面的输入框来手动输入您想要的值。</p>"

#. i18n: file kadddevicedlg.ui line 148
#: rc.cpp:31
#, no-c-format
msgid "Automatic:"
msgstr "自动："

#. i18n: file kadddevicedlg.ui line 151
#: rc.cpp:34
#, no-c-format
msgid "Use a dynamic IP address"
msgstr "使用动态 IP 地址"

#. i18n: file kadddevicedlg.ui line 156
#: rc.cpp:37
#, no-c-format
msgid ""
"<p>Using an dynamic IP address causes this device to get a free IP address "
"automatically.</p>\n"
"<p>The interface will try to contact an DHCP- or BOOTP-Server during the boot "
"process.</p>\n"
"<p>Rendevouz is not supported yet.</p>"
msgstr ""
"<p>使用动态 IP 地址将使得此设备自动获得一个空闲的 IP 地址。</p>\n"
"<p>接口在启动过程中会尝试连接一个 DHCP 或者 BOOTP 服务器。</p>\n"
"<p>暂不支持 Rendevouz。</p>"

#. i18n: file kadddevicedlg.ui line 184
#: rc.cpp:42
#, no-c-format
msgid "Activate when the computer starts"
msgstr "当计算机启动时激活"

#. i18n: file kadddevicedlg.ui line 187
#: rc.cpp:45
#, no-c-format
msgid "Ensures that this interface gets activated during boot time"
msgstr "保证此接口在启动时被激活"

#. i18n: file kadddevicedlg.ui line 191
#: rc.cpp:48
#, no-c-format
msgid ""
"<p>Ensures that this interface gets activated during boot time.</p>\n"
"<p>Otherwise, you will have to active the interface manually after you have "
"logged in after the boot process.</p>"
msgstr ""
"<p>保证此接口在启动时被激活。</p>\n"
"<p>否则，您需要在启动过程后登录再手工激活此接口。</p>"

#. i18n: file kadddevicedlg.ui line 197
#: rc.cpp:52
#, no-c-format
msgid "255.255.255.0"
msgstr "255.255.255.0"

#. i18n: file kadddevicedlg.ui line 202
#: rc.cpp:55
#, no-c-format
msgid "255.255.0.0"
msgstr "255.255.0.0"

#. i18n: file kadddevicedlg.ui line 207
#: rc.cpp:58
#, no-c-format
msgid "255.0.0.0"
msgstr "255.0.0.0"

#. i18n: file kadddevicedlg.ui line 212
#: rc.cpp:61
#, no-c-format
msgid "255.255.255.128"
msgstr "255.255.255.128"

#. i18n: file kadddevicedlg.ui line 217
#: rc.cpp:64
#, no-c-format
msgid "255.255.255.192"
msgstr "255.255.255.192"

#. i18n: file kadddevicedlg.ui line 222
#: rc.cpp:67
#, no-c-format
msgid "255.255.255.240"
msgstr "255.255.255.240"

#. i18n: file kadddevicedlg.ui line 227
#: rc.cpp:70
#, no-c-format
msgid "255.255.255.248"
msgstr "255.255.255.248"

#. i18n: file kadddevicedlg.ui line 237
#: rc.cpp:73
#, no-c-format
msgid "Subnetmask of the network device"
msgstr "此网络设备的子网掩码"

#. i18n: file kadddevicedlg.ui line 242
#: rc.cpp:76
#, no-c-format
msgid ""
"<p>Please enter the desired subnetmask for the interface here.</p>\n"
"<p>For small private networks, 255.255.255.0 will most often be a reasonable "
"default value.</p>\n"
"<p>This field will change from a popup box to a combo box as soon as you enable "
"the advanced settings below.</p>"
msgstr ""
"<p>请在此输入接口所需要的子网掩码。</p>\n"
"<p>对于小的私有网络，绝大多数情况下取 255.255.255.0 作为默认值即可。</p>\n"
"<p>如果您启用了下面的高级设置，此字段将会从一个下拉框变成一个组合框。</p> "

#. i18n: file kadddevicedlg.ui line 284
#: rc.cpp:81
#, no-c-format
msgid "Netmask:"
msgstr "网络掩码："

#. i18n: file kadddevicedlg.ui line 287
#: rc.cpp:84 rc.cpp:87
#, no-c-format
msgid ""
"The netmask defines a range of IP numbers which will build a subnet inside the "
"network."
msgstr "网络掩码定义了一段 IP 地址，这些 IP 地址将构成网络里的一个子网。"

#. i18n: file kadddevicedlg.ui line 301
#: rc.cpp:90
#, no-c-format
msgid "IP address for the network device"
msgstr "网络设备的 IP 地址"

#. i18n: file kadddevicedlg.ui line 311
#: rc.cpp:93
#, no-c-format
msgid ""
"<p>Here you should enter the IP address for the network interface.</p>\n"
"<p>Please note: If your network is connected to the internet, you should only "
"enter IP addresses you have been given by your provider.</p>\n"
"<p>Otherwise, you should enter one of the IP addresses which are explicitly "
"reserved for private use.</p>\n"
"<p>Most small private networks use class C networks, which allow up to 255 "
"computers in your network. So simply use addresses like 192.168.1.1, "
"192.168.1.2, 192.168.1.171 and so on for your computers.</p>\n"
"<p>Cass C networks: 192.168.0.0 to 192.168.255.25, for example 192.168.0.13.</p>"
"\n"
"<p>Class B networks: 172.16.0.0 to 172.31.255.255, for example 172.28.2.5</p>\n"
"<p>Class A networks: 10.0.0.0 to 10.255.255.255, for example 10.5.12.14</p>\n"
"<p>Please ensure that all IP addresses you give to your computers are unique; "
"you will have many problems if the same address is assigned to more than one "
"network device.</p>"
msgstr ""
"<p>您应在此输入网卡接口的 IP 地址。</p>\n"
"<p>请注意：如果您的网络是连到 Internet 的，您应该只输入网络供应商所提供的 IP 地址。</p>\n"
"<p>否则，您应该在此输入一个私有网络 IP 地址。</p>\n"
"<p>大多数私有网络使用 C 类网络，可以容纳多至 255 台主机。所以您的计算机使用像 "
"192.168.1.1、192.168.1.2、192.168.1.171 这样的地址就行了。</p>\n"
"<p>C 类网络：192.168.0.0 到 192.168.255.255，比如 192.168.0.13</p>\n"
"<p>B 类网络：172.16.0.0 到 172.31.255.255，比如 172.28.2.5</p>\n"
"<p>A 类网络：10.0.0.0 到 10.255.255.255，比如 10.5.12.14</p>\n"
"<p>请确保您为您的计算机设定的IP地址都是唯一的；如果将同一个地址指派给了多个网络设备的话，您会有很多麻烦。</p>"

#. i18n: file kadddevicedlg.ui line 336
#: rc.cpp:103 rc.cpp:184 rc.cpp:202 rc.cpp:286
#, no-c-format
msgid "IP address:"
msgstr "IP 地址："

#. i18n: file kadddevicedlg.ui line 339
#: rc.cpp:106 rc.cpp:109 rc.cpp:142 rc.cpp:145
#, no-c-format
msgid ""
"An IP address is an unique identifier of a networking device in an TCP/IP "
"network"
msgstr "IP 地址是 TCP/IP 网络中网络设备的唯一标识符"

#. i18n: file kadddevicedlgextension.ui line 16
#: rc.cpp:112
#, no-c-format
msgid "Advanced Options"
msgstr "高级选项"

#. i18n: file kadddevicedlgextension.ui line 27
#: rc.cpp:115
#, no-c-format
msgid "Advanced Device Information"
msgstr "高级设备信息"

#. i18n: file kadddevicedlgextension.ui line 30
#: rc.cpp:118
#, no-c-format
msgid "Set advanced setting for the network device"
msgstr "设置网络设备的高级设置"

#. i18n: file kadddevicedlgextension.ui line 41
#: rc.cpp:121
#, no-c-format
msgid "Description:"
msgstr "描述："

#. i18n: file kadddevicedlgextension.ui line 44
#: rc.cpp:124 rc.cpp:133
#, no-c-format
msgid "IP address of the network device"
msgstr "网络设备的 IP 地址"

#. i18n: file kadddevicedlgextension.ui line 55
#: rc.cpp:127 rc.cpp:130
#, no-c-format
msgid "Simply enter a short human-readable description for this device"
msgstr "为此设备输入一段简短的描述"

#. i18n: file kadddevicedlgextension.ui line 72
#: rc.cpp:136
#, no-c-format
msgid ""
"The Broadcast is a special address. All devices of a network respond if "
"packages are sent to this address."
msgstr "广播地址是一个特殊的地址。如果有数据包发到此地址，网络中的全部设备都会响应。"

#. i18n: file kadddevicedlgextension.ui line 80
#: rc.cpp:139
#, no-c-format
msgid "Gateway:"
msgstr "网关："

#. i18n: file kadddevicedlgextension.ui line 100
#: rc.cpp:148
#, no-c-format
msgid "Default gateway for the network device"
msgstr "网络设备的默认网关"

#. i18n: file kadddevicedlgextension.ui line 103
#: rc.cpp:151
#, no-c-format
msgid ""
"<p>Here you should enter the default gateway for the network device.</p>"
msgstr "<p>在此输入网络设备的默认网关。</p>"

#. i18n: file kadddevicedlgextension.ui line 111
#: rc.cpp:154
#, no-c-format
msgid "Broadcast:"
msgstr "广播："

#. i18n: file kadddevicewifiext.ui line 18
#: rc.cpp:157 rc.cpp:160
#, no-c-format
msgid "Wireless Settings"
msgstr "无线设置"

#. i18n: file kadddevicewifiext.ui line 43
#: rc.cpp:163
#, no-c-format
msgid "WEP key:"
msgstr "WEP 密钥："

#. i18n: file kadddevicewifiext.ui line 61
#: rc.cpp:166
#, no-c-format
msgid "ESSID:"
msgstr "ESSID："

#. i18n: file kadddevicewifiext.ui line 69
#: rc.cpp:169
#, no-c-format
msgid "Key type:"
msgstr "密钥类型："

#. i18n: file kadddevicewifiext.ui line 75
#: rc.cpp:172
#, no-c-format
msgid "ASCII"
msgstr "ASCII"

#. i18n: file kadddevicewifiext.ui line 80
#: rc.cpp:175
#, no-c-format
msgid "Hexadecimal"
msgstr "十六进制"

#. i18n: file kadddnsserverdlg.ui line 28
#: rc.cpp:178
#, no-c-format
msgid "Add New DNS Server"
msgstr "添加新 DNS 服务器"

#. i18n: file kadddnsserverdlg.ui line 59
#: rc.cpp:181
#, no-c-format
msgid "IP address of the new DNS server"
msgstr "新 DNS 服务器的 IP 地址"

#. i18n: file kadddnsserverdlg.ui line 92
#: rc.cpp:187
#, no-c-format
msgid "&Add"
msgstr "添加(&A)"

#. i18n: file kadddnsserverdlg.ui line 95
#: rc.cpp:190
#, no-c-format
msgid "Add the server to the list"
msgstr "将服务器添加到列表"

#. i18n: file kadddnsserverdlg.ui line 106
#: rc.cpp:196
#, no-c-format
msgid "Forget it"
msgstr "放弃"

#. i18n: file kaddknownhostdlg.ui line 154
#: rc.cpp:211 rc.cpp:325
#, no-c-format
msgid "Aliases"
msgstr "别名"

#. i18n: file kaddknownhostdlg.ui line 184
#: rc.cpp:214 rc.cpp:310 rc.cpp:328
#, no-c-format
msgid "&Add..."
msgstr "添加(&A)..."

#. i18n: file kaddknownhostdlg.ui line 201
#: rc.cpp:217 rc.cpp:313 rc.cpp:331
#, no-c-format
msgid "&Edit..."
msgstr "编辑(&E)..."

#. i18n: file kdetectdistrodlg.ui line 16
#: rc.cpp:223
#, no-c-format
msgid "Detecting Your Current Platform"
msgstr "检测您目前的平台"

#. i18n: file kdetectdistrodlg.ui line 60
#: rc.cpp:226
#, no-c-format
msgid "Please wait while detecting your current platform..."
msgstr "请稍候，正在检测您目前的平台..."

#. i18n: file kinterfaceupdowndlg.ui line 16
#: rc.cpp:229
#, no-c-format
msgid "Changing Interface State"
msgstr "更改接口状态"

#. i18n: file kinterfaceupdowndlg.ui line 64
#: rc.cpp:232
#, no-c-format
msgid "Bringing up interface <b>eth0</b>..."
msgstr "正在启用接口 <b>eth0</b>..."

#. i18n: file knetworkconfdlg.ui line 36
#: rc.cpp:235
#, no-c-format
msgid "Network Settings"
msgstr "网络设置"

#. i18n: file knetworkconfdlg.ui line 42
#: rc.cpp:238
#, no-c-format
msgid "Configure your TCP/IP settings"
msgstr "配置您的 TCP/IP 设置"

#. i18n: file knetworkconfdlg.ui line 45
#: rc.cpp:241
#, no-c-format
msgid "Change TCP/IP settings"
msgstr "更改 TCP/IP 设置"

#. i18n: file knetworkconfdlg.ui line 66
#: rc.cpp:244
#, no-c-format
msgid "Network Interfaces"
msgstr "网络接口"

#. i18n: file knetworkconfdlg.ui line 85
#: rc.cpp:247
#, no-c-format
msgid "Available Network Interfaces"
msgstr "可用的网络接口"

#. i18n: file knetworkconfdlg.ui line 110
#: rc.cpp:250
#, no-c-format
msgid "Interface"
msgstr "接口"

#. i18n: file knetworkconfdlg.ui line 121
#: rc.cpp:253 rc.cpp:322
#, no-c-format
msgid "IP Address"
msgstr "IP 地址"

#. i18n: file knetworkconfdlg.ui line 132
#: rc.cpp:256
#, no-c-format
msgid "Protocol"
msgstr "协议"

#. i18n: file knetworkconfdlg.ui line 143
#: rc.cpp:259
#, no-c-format
msgid "State"
msgstr "状态"

#. i18n: file knetworkconfdlg.ui line 154
#: rc.cpp:262
#, no-c-format
msgid "Comment"
msgstr "注释"

#. i18n: file knetworkconfdlg.ui line 175
#: rc.cpp:265
#, no-c-format
msgid "List of configured network devices"
msgstr "已配置的网络设备列表"

#. i18n: file knetworkconfdlg.ui line 194
#: rc.cpp:268
#, no-c-format
msgid "Configure Interface..."
msgstr "配置接口..."

#. i18n: file knetworkconfdlg.ui line 197
#: rc.cpp:271
#, no-c-format
msgid "Change the settings of the selected device"
msgstr "更改选中设备的设置"

#. i18n: file knetworkconfdlg.ui line 208
#: rc.cpp:274
#, no-c-format
msgid "Enable Interface"
msgstr "启用接口"

#. i18n: file knetworkconfdlg.ui line 219
#: rc.cpp:277
#, no-c-format
msgid "Disable Interface"
msgstr "禁用接口"

#. i18n: file knetworkconfdlg.ui line 248
#: rc.cpp:280
#, no-c-format
msgid "Routes"
msgstr "路由"

#. i18n: file knetworkconfdlg.ui line 265
#: rc.cpp:283
#, no-c-format
msgid "Default Gateway"
msgstr "默认网关"

#. i18n: file knetworkconfdlg.ui line 348
#: rc.cpp:289
#, no-c-format
msgid "Default Gateway IP address"
msgstr "默认网关 IP 地址"

#. i18n: file knetworkconfdlg.ui line 373
#: rc.cpp:292
#, no-c-format
msgid "Device:"
msgstr "设备："

#. i18n: file knetworkconfdlg.ui line 401
#: rc.cpp:295
#, no-c-format
msgid "Network device where to send packets"
msgstr "数据包发送目的网络设备"

#. i18n: file knetworkconfdlg.ui line 432
#: rc.cpp:298
#, no-c-format
msgid "Domain Name System"
msgstr "域名系统"

#. i18n: file knetworkconfdlg.ui line 443
#: rc.cpp:301
#, no-c-format
msgid "Domain Name Servers"
msgstr "域名服务器"

#. i18n: file knetworkconfdlg.ui line 499
#: rc.cpp:304
#, no-c-format
msgid "Move up the selected server on the list (higher priority)"
msgstr "将列表中选中的服务器上移(高优先级)"

#. i18n: file knetworkconfdlg.ui line 513
#: rc.cpp:307
#, no-c-format
msgid "Move down the selected server on the list (less priority)"
msgstr "将列表中选中的服务器下移(低优先级)"

#. i18n: file knetworkconfdlg.ui line 637
#: rc.cpp:319
#, no-c-format
msgid "Static Hosts"
msgstr "静态主机"

#. i18n: file knetworkconfdlg.ui line 738
#: rc.cpp:337
#, no-c-format
msgid "Host name:"
msgstr "主机名："

#. i18n: file knetworkconfdlg.ui line 762
#: rc.cpp:340
#, no-c-format
msgid "Domain name:"
msgstr "域名："

#. i18n: file knetworkconfdlg.ui line 772
#: rc.cpp:343
#, no-c-format
msgid "Network Profiles"
msgstr "网络配置文件"

#. i18n: file knetworkconfdlg.ui line 783
#: rc.cpp:346
#, no-c-format
msgid "Available Network Profiles"
msgstr "可用的网络配置文件"

#. i18n: file knetworkconfdlg.ui line 792
#: rc.cpp:349
#, no-c-format
msgid "Name"
msgstr "名称"

#. i18n: file knetworkconfdlg.ui line 821
#: rc.cpp:352
#, no-c-format
msgid "&Load Selected"
msgstr "装入选中(&L)"

#. i18n: file knetworkconfdlg.ui line 829
#: rc.cpp:355
#, no-c-format
msgid "&Save Selected"
msgstr "保存选中(&S)"

#. i18n: file knetworkconfdlg.ui line 837
#: rc.cpp:358
#, no-c-format
msgid "&Create New..."
msgstr "创建(&C)..."

#. i18n: file knetworkconfdlg.ui line 845
#: rc.cpp:361
#, no-c-format
msgid "&Delete Selected"
msgstr "删除选中(&D)"

#. i18n: file kreloadnetworkdlg.ui line 28
#: knetworkconfigparser.cpp:303 rc.cpp:364
#, no-c-format
msgid "Reloading Network"
msgstr "重新装入网络"

#. i18n: file kreloadnetworkdlg.ui line 112
#: rc.cpp:370
#, no-c-format
msgid ""
"Please wait while the network is reloaded so\n"
"the changes can take effect."
msgstr "请稍候，正在重新装入网络，以便让更改生效。"

#. i18n: file tdeselectdistrodlg.ui line 16
#: rc.cpp:374
#, no-c-format
msgid "Unsupported Platform"
msgstr "不支持的平台"

#. i18n: file tdeselectdistrodlg.ui line 69
#: rc.cpp:383
#, no-c-format
msgid "Do not ask again"
msgstr "不要再次询问"

#. i18n: file tdeselectdistrodlg.ui line 94
#: rc.cpp:386
#, no-c-format
msgid ""
"<font size=\"+1\"><p align=\"center\"><b>Your Platform is Not Supported</b></p>"
"</font>"
msgstr ""
"<font size=\"+1\"><p align=\"center\"><b>您的平台暂不支持</b></\n"
"p></font>"

#. i18n: file tdeselectdistrodlg.ui line 102
#: rc.cpp:389
#, no-c-format
msgid ""
"You may choose one of the following supported platforms if you are <b>sure</b> "
"your platform behaves the same as the chosen one. Please be sure, because your "
"current network configuration could be damaged."
msgstr "您可以选择以下被支持的平台，如果您<b>确定</b>您的平台和所选择平台表现一致的话。请务必确认这一点，因为您现在的网络配置可能因此被破坏。"

#: kadddevicecontainer.cpp:53
msgid "&Advanced Settings"
msgstr "高级设置(&A)"

#: kadddevicecontainer.cpp:54 kadddevicecontainer.cpp:55
msgid "Toggle between advanced and basic settings"
msgstr "切换高级和基此设置"

#: kadddevicecontainer.cpp:57
msgid "Apply changes"
msgstr "应用更改"

#: kadddevicecontainer.cpp:59
msgid "Forget changes"
msgstr "放弃更改"

#: kadddevicecontainer.cpp:129 kadddnsserverdlg.ui.h:42
#: kaddknownhostdlg.ui.h:25
msgid "The format of the specified IP address is not valid."
msgstr "指定 IP 地址的格式无效。"

#: kadddevicecontainer.cpp:132
msgid "The format of the specified netmask is not valid."
msgstr "指定的网络掩码的格式无效。"

#: kadddevicecontainer.cpp:135
msgid "The format of the specified broadcast is not valid."
msgstr "指定的广播地址的格式无效。"

#: kadddevicecontainer.cpp:138
msgid "The format of the specified Gateway is not valid."
msgstr "指定的网关的格式无效。"

#: kadddevicecontainer.cpp:174
msgid "Basic Settings"
msgstr "基此设置"

#: kadddevicecontainer.cpp:179
msgid "Advanced Settings"
msgstr "高级设置"

#: kprofileslistviewtooltip.h:84
msgid "<b>Network Configuration of this Profile:</b>"
msgstr "<b>此配置文件的网络配置：</b>"

#: kprofileslistviewtooltip.h:94
#, c-format
msgid "<p><b>Interface:</b> %1"
msgstr "<p><b>接口：</b> %1"

#: kprofileslistviewtooltip.h:95
#, c-format
msgid "<br><b>Type:</b> %1"
msgstr "<br><b>类型：</b> %1"

#: kprofileslistviewtooltip.h:101
#, c-format
msgid "<br><b>Boot Protocol:</b> %1"
msgstr "<br><b>启动协议：</b> %1"

#: kprofileslistviewtooltip.h:104
#, c-format
msgid "<br><b>IP Address:</b>   %1"
msgstr "<br><b>IP 地址：</b>   %1"

#: kprofileslistviewtooltip.h:105
#, c-format
msgid "<br><b>Broadcast Address:</b> %1"
msgstr "<br><b>广播地址：</b> %1"

#: kprofileslistviewtooltip.h:107
#, c-format
msgid "<br><b>On Boot:</b> %1"
msgstr "<br><b>启动时：</b> %1"

#: kprofileslistviewtooltip.h:111
#, c-format
msgid "</p><p><b>Default Gateway:</b>   %1"
msgstr "</p><p><b>默认网关：</b>   %1"

#: kprofileslistviewtooltip.h:113
#, c-format
msgid "<br><b>Domain Name:</b> %1"
msgstr "<br><b>域名：</b> %1"

#: kprofileslistviewtooltip.h:114
#, c-format
msgid "<br><b>Machine Name:</b> %1"
msgstr "<br><b>机器名：</b> %1"

#: kprofileslistviewtooltip.h:118
#, c-format
msgid "<br><b>DNS Name Server:</b> %1"
msgstr "<br><b>DNS 服务器：</b> %1"

#: kaddknownhostdlg.ui.h:29
msgid "You must add at least one alias for the specified IP address."
msgstr "您必须为指定的 IP 地址至少添加一个别名。"

#: kaddknownhostdlg.ui.h:29
msgid "Insufficient Aliases"
msgstr "别名不足"

#: kaddknownhostdlg.ui.h:63
msgid "Edit Alias"
msgstr "编辑别名"

#: kaddknownhostdlg.ui.h:64 kaddknownhostdlg.ui.h:92
msgid "Alias:"
msgstr "别名："

#: kaddknownhostdlg.ui.h:91
msgid "Add New Alias"
msgstr "添加新别名"

#: _translatorinfo.cpp:1
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Zhang Le"

#: _translatorinfo.cpp:3
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "robert@thizgroup.com"

#: version.h:5
msgid ""
"KNetworkConf - A Trinity Control Center module to configure TCP/IP settings."
msgstr "KNetworkConf - 允许您配置 TCP/IP 设置的 TDE 控制中心模块。"

#: knetworkconfmodule.cpp:94
msgid "KNetworkConf"
msgstr "KNetworkConf"

#: knetworkconfmodule.cpp:97
msgid "Lead Developer"
msgstr "首席开发者"

#: knetworkconfmodule.cpp:99
msgid "Provided the Network backend which KNetworkConf relies on."
msgstr "提供了 KNetworkConf 所依赖的网络后端。"

#: knetworkconfmodule.cpp:101
msgid "Conectiva Linux Support"
msgstr "Conectiva Linux 支持"

#: knetworkconfmodule.cpp:103
msgid "Documentation maintainer, and German translator"
msgstr "文档维护者和德语翻译"

#: knetworkconfmodule.cpp:105
msgid "Various bugfixes and features"
msgstr "各种错误修正和特性"

#: knetworkconfmodule.cpp:107
msgid "Various bugfixes and Brazilian Portuguese translator"
msgstr "各种错误修正和巴西葡萄牙语翻译"

#: knetworkconfmodule.cpp:113
msgid ""
"%1Network configuration%2This module allows you to configure your TCP/IP "
"settings.%3"
msgstr "%1网络配置%2此模块允许您配置您的 TCP/IP 设置。%3"

#: kadddnsserverdlg.ui.h:54
msgid "You have to type an alias first."
msgstr "您必须先输入一个别名。"

#: kadddnsserverdlg.ui.h:54
msgid "Invalid Text"
msgstr "无效文字"

#: knetworkconfigparser.cpp:41
#, fuzzy
msgid ""
"Could not find the backend script for the network configuration detection. "
"Something is wrong with your installation.\n"
" Please check that \n"
"{TDE_PATH}/%1 \n"
"file is present."
msgstr ""
"无法找到后端脚本此来进行网络配置检测。您的安装可能存在问题。\n"
"请检查 \n"
"{TDE_PATH}/%1 \n"
"文件是否存在。"

#: knetworkconfigparser.cpp:42
msgid "Could Not Find Network Configuration Backend Script"
msgstr "找不到网络配置后端脚本"

#: knetworkconfigparser.cpp:65 knetworkconfigparser.cpp:95
#: knetworkconfigparser.cpp:320 knetworkconfigparser.cpp:1016
msgid ""
"Could not execute backend script for the network configuration detection. "
"Something is wrong with your installation."
msgstr "无法执行后端脚本进行网络配置检测。您的安装可能存在问题。"

#: knetworkconfigparser.cpp:66 knetworkconfigparser.cpp:96
#: knetworkconfigparser.cpp:321 knetworkconfigparser.cpp:1017
msgid "Could Not Launch Network Configuration Backend Script"
msgstr "无法执行网络配置后端脚本"

#: knetworkconfigparser.cpp:113 knetworkconfigparser.cpp:837
msgid "Could not parse the XML output from the network configuration backend."
msgstr "无法分析网络配置后端的 XML 输出。"

#: knetworkconfigparser.cpp:114
msgid "Error While Listing Network Interfaces"
msgstr "列出网络接口时出错"

#: knetworkconfigparser.cpp:191
msgid "Could not open file /proc/net/route."
msgstr "无法打开文件 /proc/net/route。"

#: knetworkconfigparser.cpp:192
msgid "Could Not Open File"
msgstr "无法打开文件"

#: knetworkconfigparser.cpp:304
msgid "%1Please wait while saving the network settings...%2"
msgstr "%1请稍候，正在保存网络设置...%2"

#: knetworkconfigparser.cpp:762
msgid "Ethernet Network Device"
msgstr "以太网设备"

#: knetworkconfigparser.cpp:764
msgid "Wireless Network Device"
msgstr "无线网络设备"

#: knetworkconfigparser.cpp:838
msgid "Error Loading The Network Configuration"
msgstr "装入网络配置时出错"

#: knetworkconfigparser.cpp:1030
msgid ""
"Could not parse the list of supported platforms from the network configuration "
"backend."
msgstr "无法分析网络配置后端的支持平台列表。"

#: knetworkconfigparser.cpp:1031
msgid "Error Obtaining Supported Platforms List"
msgstr "获取支持平台列表时出错"