You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tdepim/certmanager/conf/dirservconfigpage.cpp

297 lines
11 KiB

/*
dirservconfigpage.cpp
This file is part of kleopatra
Copyright (c) 2004 Klarälvdalens Datakonsult AB
Libkleopatra is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License,
version 2, as published by the Free Software Foundation.
Libkleopatra is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
In addition, as a special exception, the copyright holders give
permission to link the code of this program with any edition of
the TQt library by Trolltech AS, Norway (or with modified versions
of TQt that use the same license as TQt), and distribute linked
combinations including the two. You must obey the GNU General
Public License in all respects for all of the code used other than
TQt. If you modify this file, you may extend this exception to
your version of the file, but you are not obligated to do so. If
you do not wish to do so, delete this exception statement from
your version.
*/
#include "dirservconfigpage.h"
#include "directoryserviceswidget.h"
#include <kleo/cryptobackendfactory.h>
#include <kmessagebox.h>
#include <klocale.h>
#include <kdebug.h>
#include <kconfig.h>
#include <knuminput.h>
#include <kdialog.h>
#include <tqhbox.h>
#include <tqlabel.h>
#include <tqdatetimeedit.h>
#include <tqcheckbox.h>
#include <tqlayout.h>
#include <tdepimmacros.h>
#if 0 // disabled, since it is apparently confusing
// For sync'ing kabldaprc
class KABSynchronizer
{
public:
KABSynchronizer()
: mConfig( "kabldaprc" ) {
mConfig.setGroup( "LDAP" );
}
KURL::List readCurrentList() const {
KURL::List lst;
// stolen from kabc/ldapclient.cpp
const uint numHosts = mConfig.readUnsignedNumEntry( "NumSelectedHosts" );
for ( uint j = 0; j < numHosts; j++ ) {
const TQString num = TQString::number( j );
KURL url;
url.setProtocol( "ldap" );
url.setPath( "/" ); // workaround KURL parsing bug
const TQString host = mConfig.readEntry( TQString( "SelectedHost" ) + num ).stripWhiteSpace();
url.setHost( host );
const int port = mConfig.readUnsignedNumEntry( TQString( "SelectedPort" ) + num );
if ( port != 0 )
url.setPort( port );
const TQString base = mConfig.readEntry( TQString( "SelectedBase" ) + num ).stripWhiteSpace();
url.setQuery( base );
const TQString bindDN = mConfig.readEntry( TQString( "SelectedBind" ) + num ).stripWhiteSpace();
url.setUser( bindDN );
const TQString pwdBindDN = mConfig.readEntry( TQString( "SelectedPwdBind" ) + num ).stripWhiteSpace();
url.setPass( pwdBindDN );
lst.append( url );
}
return lst;
}
void writeList( const KURL::List& lst ) {
mConfig.writeEntry( "NumSelectedHosts", lst.count() );
KURL::List::const_iterator it = lst.begin();
KURL::List::const_iterator end = lst.end();
unsigned j = 0;
for( ; it != end; ++it, ++j ) {
const TQString num = TQString::number( j );
KURL url = *it;
Q_ASSERT( url.protocol() == "ldap" );
mConfig.writeEntry( TQString( "SelectedHost" ) + num, url.host() );
mConfig.writeEntry( TQString( "SelectedPort" ) + num, url.port() );
// KURL automatically encoded the query (e.g. for spaces inside it),
// so decode it before writing it out
const TQString base = KURL::decode_string( url.query().mid(1) );
mConfig.writeEntry( TQString( "SelectedBase" ) + num, base );
mConfig.writeEntry( TQString( "SelectedBind" ) + num, url.user() );
mConfig.writeEntry( TQString( "SelectedPwdBind" ) + num, url.pass() );
}
mConfig.sync();
}
private:
KConfig mConfig;
};
#endif
static const char s_dirserv_componentName[] = "dirmngr";
static const char s_dirserv_groupName[] = "LDAP";
static const char s_dirserv_entryName[] = "LDAP Server";
static const char s_timeout_componentName[] = "dirmngr";
static const char s_timeout_groupName[] = "LDAP";
static const char s_timeout_entryName[] = "ldaptimeout";
static const char s_maxitems_componentName[] = "dirmngr";
static const char s_maxitems_groupName[] = "LDAP";
static const char s_maxitems_entryName[] = "max-replies";
static const char s_addnewservers_componentName[] = "dirmngr";
static const char s_addnewservers_groupName[] = "LDAP";
static const char s_addnewservers_entryName[] = "add-servers";
DirectoryServicesConfigurationPage::DirectoryServicesConfigurationPage( TQWidget * parent, const char * name )
: KCModule( parent, name )
{
mConfig = Kleo::CryptoBackendFactory::instance()->config();
TQVBoxLayout* lay = new TQVBoxLayout( this, 0, KDialog::spacingHint() );
Kleo::CryptoConfigEntry* entry = configEntry( s_dirserv_componentName, s_dirserv_groupName, s_dirserv_entryName,
Kleo::CryptoConfigEntry::ArgType_LDAPURL, true );
mWidget = new Kleo::DirectoryServicesWidget( entry, this );
lay->addWidget( mWidget );
connect( mWidget, TQT_SIGNAL( changed() ), this, TQT_SLOT( slotChanged() ) );
// LDAP timeout
TQHBox* box = new TQHBox( this );
box->setSpacing( KDialog::spacingHint() );
lay->addWidget( box );
TQLabel* label = new TQLabel( i18n( "LDAP &timeout (minutes:seconds)" ), box );
mTimeout = new TQTimeEdit( box );
mTimeout->setDisplay( TQTimeEdit::Minutes | TQTimeEdit::Seconds );
connect( mTimeout, TQT_SIGNAL( valueChanged( const TQTime& ) ), this, TQT_SLOT( slotChanged() ) );
label->setBuddy( mTimeout );
TQWidget* stretch = new TQWidget( box );
box->setStretchFactor( stretch, 2 );
// Max number of items returned by queries
box = new TQHBox( this );
box->setSpacing( KDialog::spacingHint() );
lay->addWidget( box );
mMaxItems = new KIntNumInput( box );
mMaxItems->setLabel( i18n( "&Maximum number of items returned by query" ), TQt::AlignLeft | TQt::AlignVCenter );
mMaxItems->setMinValue( 0 );
connect( mMaxItems, TQT_SIGNAL( valueChanged(int) ), this, TQT_SLOT( slotChanged() ) );
stretch = new TQWidget( box );
box->setStretchFactor( stretch, 2 );
#ifdef NOT_USEFUL_CURRENTLY
mAddNewServersCB = new TQCheckBox( i18n( "Automatically add &new servers discovered in CRL distribution points" ), this );
connect( mAddNewServersCB, TQT_SIGNAL( clicked() ), this, TQT_SLOT( slotChanged() ) );
lay->addWidget( mAddNewServersCB );
#endif
#ifndef HAVE_UNBROKEN_KCMULTIDIALOG
load();
#endif
}
void DirectoryServicesConfigurationPage::load()
{
mWidget->load();
mTimeoutConfigEntry = configEntry( s_timeout_componentName, s_timeout_groupName, s_timeout_entryName, Kleo::CryptoConfigEntry::ArgType_UInt, false );
if ( mTimeoutConfigEntry ) {
TQTime time = TQTime().addSecs( mTimeoutConfigEntry->uintValue() );
//kdDebug() << "timeout:" << mTimeoutConfigEntry->uintValue() << " -> " << time << endl;
mTimeout->setTime( time );
}
mMaxItemsConfigEntry = configEntry( s_maxitems_componentName, s_maxitems_groupName, s_maxitems_entryName, Kleo::CryptoConfigEntry::ArgType_UInt, false );
if ( mMaxItemsConfigEntry ) {
mMaxItems->blockSignals( true ); // KNumInput emits valueChanged from setValue!
mMaxItems->setValue( mMaxItemsConfigEntry->uintValue() );
mMaxItems->blockSignals( false );
}
#ifdef NOT_USEFUL_CURRENTLY
mAddNewServersConfigEntry = configEntry( s_addnewservers_componentName, s_addnewservers_groupName, s_addnewservers_entryName, Kleo::CryptoConfigEntry::ArgType_None, false );
if ( mAddNewServersConfigEntry ) {
mAddNewServersCB->setChecked( mAddNewServersConfigEntry->boolValue() );
}
#endif
}
void DirectoryServicesConfigurationPage::save()
{
mWidget->save();
TQTime time( mTimeout->time() );
unsigned int timeout = time.minute() * 60 + time.second();
if ( mTimeoutConfigEntry && mTimeoutConfigEntry->uintValue() != timeout )
mTimeoutConfigEntry->setUIntValue( timeout );
if ( mMaxItemsConfigEntry && mMaxItemsConfigEntry->uintValue() != (uint)mMaxItems->value() )
mMaxItemsConfigEntry->setUIntValue( mMaxItems->value() );
#ifdef NOT_USEFUL_CURRENTLY
if ( mAddNewServersConfigEntry && mAddNewServersConfigEntry->boolValue() != mAddNewServersCB->isChecked() )
mAddNewServersConfigEntry->setBoolValue( mAddNewServersCB->isChecked() );
#endif
mConfig->sync( true );
#if 0
// Also write the LDAP URLs to kabldaprc so that they are used by kaddressbook
KABSynchronizer sync;
const KURL::List toAdd = mWidget->urlList();
KURL::List currentList = sync.readCurrentList();
KURL::List::const_iterator it = toAdd.begin();
KURL::List::const_iterator end = toAdd.end();
for( ; it != end; ++it ) {
// check if the URL is already in currentList
if ( currentList.find( *it ) == currentList.end() )
// if not, add it
currentList.append( *it );
}
sync.writeList( currentList );
#endif
}
void DirectoryServicesConfigurationPage::defaults()
{
mWidget->defaults();
if ( mTimeoutConfigEntry )
mTimeoutConfigEntry->resetToDefault();
if ( mMaxItemsConfigEntry )
mMaxItemsConfigEntry->resetToDefault();
#ifdef NOT_USEFUL_CURRENTLY
if ( mAddNewServersConfigEntry )
mAddNewServersConfigEntry->resetToDefault();
#endif
load();
}
extern "C"
{
KDE_EXPORT KCModule *create_kleopatra_config_dirserv( TQWidget *parent, const char * )
{
DirectoryServicesConfigurationPage *page =
new DirectoryServicesConfigurationPage( parent, "kleopatra_config_dirserv" );
return page;
}
}
// tdelibs-3.2 didn't have the changed signal in KCModule...
void DirectoryServicesConfigurationPage::slotChanged()
{
emit changed(true);
}
// Find config entry for ldap servers. Implements runtime checks on the configuration option.
Kleo::CryptoConfigEntry* DirectoryServicesConfigurationPage::configEntry( const char* componentName,
const char* groupName,
const char* entryName,
Kleo::CryptoConfigEntry::ArgType argType,
bool isList )
{
Kleo::CryptoConfigEntry* entry = mConfig->entry( componentName, groupName, entryName );
if ( !entry ) {
KMessageBox::error( this, i18n( "Backend error: gpgconf does not seem to know the entry for %1/%2/%3" ).tqarg( componentName, groupName, entryName ) );
return 0;
}
if( entry->argType() != argType || entry->isList() != isList ) {
KMessageBox::error( this, i18n( "Backend error: gpgconf has wrong type for %1/%2/%3: %4 %5" ).tqarg( componentName, groupName, entryName ).tqarg( entry->argType() ).tqarg( entry->isList() ) );
return 0;
}
return entry;
}
#include "dirservconfigpage.moc"