You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tdepowersave/po/uk.po

1619 lines
53 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# Translation of tdepowersave.uk.po to Ukrainian
# This file is distributed under the same license as the PACKAGE package.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER.
#
# Ivan Petrouchtchak <iip@telus.net>, 2005.
# Ivan Petrouchtchak <ivanpetrouchtchak@yahoo.com>, 2006, 2007.
# Roman Savochenko <roman@oscada.org>, 2021.
msgid ""
msgstr ""
"Project-Id-Version: tdepowersave.uk\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2021-07-07 18:33+0000\n"
"PO-Revision-Date: 2021-10-07 08:31+0000\n"
"Last-Translator: Roman Savochenko <roman@oscada.org>\n"
"Language-Team: Ukrainian <https://mirror.git.trinitydesktop.org/weblate/"
"projects/applications/tdepowersave/uk/>\n"
"Language: uk\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
"X-Generator: Weblate 4.8.1\n"
#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Роман Савоченко"
#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "roman@oscada.org"
#: blacklisteditdialog.cpp:60
msgid "General Blacklist"
msgstr "Загальний чорний список"
#: blacklisteditdialog.cpp:63
msgid "Scheme: "
msgstr "Схема: "
#: blacklisteditdialog.cpp:114
msgid "Selected entry removed."
msgstr "Вибраний запис вилучено."
#: blacklisteditdialog.cpp:117
msgid "Could not remove the selected entry."
msgstr "Не вдалось вилучити вибраний запис."
#: blacklisteditdialog.cpp:137
msgid "Inserted new entry."
msgstr "Вставлено новий запис."
#: blacklisteditdialog.cpp:141
msgid "Entry exists already. Did not insert new entry."
msgstr "Запис вже існує. Новий запис не був вставлений."
#: blacklisteditdialog.cpp:144
msgid "Empty entry was not inserted."
msgstr "Порожній запис не був вставлений."
#: configuredialog.cpp:125 configuredialog.cpp:130 configuredialog.cpp:741
msgid " - not supported"
msgstr " - не підтримується"
#: configure_Dialog.ui:988 configuredialog.cpp:159 configuredialog.cpp:332
#: detaileddialog.cpp:438 settings.cpp:65 tdepowersave.cpp:202
#, no-c-format
msgid "Performance"
msgstr "Швидкодія"
#: configure_Dialog.ui:998 configuredialog.cpp:163 configuredialog.cpp:334
#: detaileddialog.cpp:444 settings.cpp:67 tdepowersave.cpp:204
#, no-c-format
msgid "Powersave"
msgstr "Заощадження"
#: configuredialog.cpp:168 configuredialog.cpp:336 settings.cpp:69
#: tdepowersave.cpp:1699
msgid "Presentation"
msgstr "Презентація"
#: configuredialog.cpp:173 configuredialog.cpp:338 settings.cpp:71
#: tdepowersave.cpp:1694
msgid "Acoustic"
msgstr "Акустичний"
#: configuredialog.cpp:178 configuredialog.cpp:180 configuredialog.cpp:181
#: configuredialog.cpp:182 tdepowersave.cpp:1705
msgid "Advanced Powersave"
msgstr "Розширене керування живленням"
#: configuredialog.cpp:286
msgid ""
"This enables specific screen saver settings. \n"
"Note: If selected, the global screen saver settings are \n"
"overwritten while tdepowersave runs."
msgstr ""
"Вмикає специфічні параметри зберігача екрану. \n"
"Примітка: Якщо обрано, глобальні параметри зберігача екрану \n"
"перезаписуються допоки виконується tdepowersave."
#: configuredialog.cpp:289
msgid ""
"This disables the screen saver. \n"
"Note: If selected, the global screen saver settings are \n"
"overwritten while tdepowersave runs."
msgstr ""
"Вимикає зберігач екрану. \n"
"Примітка: Якщо обрано, глобальні параметри зберігача екрану \n"
"перезаписуються допоки виконується tdepowersave."
#: configuredialog.cpp:292
msgid ""
"This blanks the screen instead of using a specific screen saver. \n"
"Note: This may work only with TDEScreensaver."
msgstr ""
"Вимикає екран замість використання певного зберігача екрана. \n"
"Примітка: Можливо, це працюватиме тільки з TDEScreensaver."
#: configuredialog.cpp:294
msgid ""
"This enables specific DPMS settings. \n"
"Note: If selected, the global DPMS settings are \n"
"overwritten while tdepowersave runs."
msgstr ""
"Вмикає специфічні параметри DPMS. \n"
"Примітка: Якщо обрано, глобальні параметри DPMS \n"
"перезаписуються допоки виконується tdepowersave."
#: configuredialog.cpp:297
msgid "This disables DPMS support."
msgstr "Вимикає підтримку DPMS."
#: configuredialog.cpp:298
msgid "If selected, the screen is locked on suspend or standby."
msgstr "Якщо увімкнено, екран замикається в режимі сну або чергування."
#: configuredialog.cpp:299
msgid "If selected, the screen is locked if the lid close event is triggered."
msgstr ""
"Якщо увімкнено, екран замикається, коли спрацювала подія \"кришку закрито\"."
#: configuredialog.cpp:301
msgid ""
"Check this box to enable or disable automatic suspension of the computer."
msgstr "Увімкнути / вимкнути автоматичний перехід комп'ютера в режим сну."
#: configuredialog.cpp:303
msgid ""
"Activate this action if the user was inactive for the defined time \n"
"(greater than 0 minutes). If empty, nothing happens."
msgstr ""
"Ввімкнути цю дію, якщо користувач був неактивним певний час \n"
"(> 0 хв.). Якщо порожньо, то нічого не станеться."
#: configuredialog.cpp:306
msgid "All scheme-related screen saver and DPMS settings."
msgstr "Всі параметри схеми зберігача екрана і DPMS."
#: configuredialog.cpp:307
msgid "All scheme-related display brightness settings."
msgstr "Всі параметри схеми яскравості дисплею."
#: configuredialog.cpp:308
msgid "All scheme-related automatic suspend settings."
msgstr "Всі параметри схеми автоматичного переходу в режим сну."
#: configuredialog.cpp:310
msgid ""
"Here you can change the brightness of your display. \n"
"Use the slider to change the brightness directly for \n"
"testing. To reset back to previous level, please press \n"
"the 'Reset' button. "
msgstr ""
"Тут можна змінити яскравість вашого дисплея. \n"
"Вживайте повзунок для зміни яскравості для перевірки.\n"
"Щоб повернутись назад до попереднього рівня, будь \n"
"ласка, натисніть кнопку \"Скинути\". "
#: configuredialog.cpp:314
msgid "Use this button to set back the slider and the display brightness."
msgstr "Вживайте цю кнопку для відновлення попередньої яскравості екрана."
#: configuredialog.cpp:367
msgid "Press this button to delete the selected scheme."
msgstr "Натисніть цю кнопку, щоб вилучити вибрану схему."
#: configuredialog.cpp:372
msgid "You can't delete the current AC or battery scheme."
msgstr "Неможливо вилучити поточну схему живлення від ел. мережі або батареї."
#: configuredialog.cpp:378
msgid "You can't delete this default scheme."
msgstr "Неможливо вилучити цю типову схему."
#: configuredialog.cpp:561
msgid ""
"Your hardware supports to change the brightness. The values of the slider "
"are in percent and mapped to the available brightness levels of your "
"hardware."
msgstr ""
"Ваше обладнання підтримує зміну яскравості. Значення повзунка в процентах "
"відповідають наявним рівням яскравості обладнання."
#: configuredialog.cpp:568
msgid ""
"Your Hardware currently not support changing the brightness of your display."
msgstr "Ваше обладнання в даний час не підтримує зміну яскравості дисплея."
#: configuredialog.cpp:684
msgid "Select Automatically"
msgstr "Вибрати автоматично"
#: configuredialog.cpp:685
msgid "TDEScreensaver"
msgstr "TDEScreensaver"
#: configuredialog.cpp:686
msgid "XScreensaver"
msgstr "XScreensaver"
#: configuredialog.cpp:687
msgid "xlock"
msgstr "xlock"
#: configuredialog.cpp:688
msgid "GNOME Screensaver"
msgstr "Зберігач екрана GNOME"
#: configuredialog.cpp:950
msgid ""
"There are unsaved changes in the active scheme.\n"
"Apply the changes before jumping to the next scheme or discard the changes?"
msgstr ""
"В активній схемі є не збережені зміни.\n"
"Застосувати зроблені зміни перед переходом до нової схеми чи відкинути їх?"
#: configuredialog.cpp:953 configuredialog.cpp:1003
msgid "Unsaved Changes"
msgstr "Не збережені зміни"
#: configuredialog.cpp:1001
msgid ""
"There are unsaved changes.\n"
"Apply the changes before cancel or discard the changes?"
msgstr ""
"Існують не збережені зміни.\n"
"Хочете застосувати зміни перед скасуванням чи відкинути зміни?"
#: configuredialog.cpp:1052
msgid "Please insert a name for the new scheme:"
msgstr "Будь ласка, введіть назву нової схеми:"
#: configuredialog.cpp:1058
msgid "TDEPowersave Configuration"
msgstr "Налаштування TDEPowersave"
#: configuredialog.cpp:1066
msgid "Error: A scheme with this name already exist.\n"
msgstr "Помилка: вже існує схема з цією назвою.\n"
#: configuredialog.cpp:1096
msgid "Do you really want to delete the %1 scheme?"
msgstr "Ви дійсно хочете вилучити схему %1?"
#: configuredialog.cpp:1098
msgid "Confirm delete scheme"
msgstr "Підтвердити вилучення схеми"
#: configuredialog.cpp:1115
msgid "Could not delete the selected scheme."
msgstr "Не вдалось вилучити вибрану схему."
#: configuredialog.cpp:1345
msgid ""
"<b>Note:</b> If you select this option, the computer will suspend or standby "
"if the current user is inactive for the defined time even if somebody is "
"logged in remotely to the X server.<br><br> This feature can also produce "
"problems with some programs, such as video players or cd burner. These "
"programs can be blacklisted by checking <b>Enable scheme-specific blacklist</"
"b> and click <b>Edit Blacklist...</b>. If this does not help, report the "
"problem or deactivate autosuspend.<br><br> Really use this option?"
msgstr ""
"<b>Примітка:</b> Якщо ви виберете цей параметр, комп'ютер перейде в режим "
"сну або чергування, якщо поточний користувач бездіяльний протягом певного "
"часу, навіть, якщо хтось віддалено з'єднаний з X-сервером. <br><br> Ця "
"функціональність може призвести до проблем в деяких програмах, таких як "
"відеопрогравачах або програмах запису компакт-дисків. Ці програми можна "
"внести до чорного списку, увімкнувши параметр <b>Увімкнути специфічний для "
"схеми чорний список</b> і клацнувши <b>Змінити чорний список...</b>. Якщо це "
"не допоможе, повідомте про проблему або вимкніть режим автосну.<br><br> "
"Дійсно вживати цей параметр?"
#: configuredialog.cpp:1423 configuredialog.cpp:1553
msgid ""
"The blacklist of the selected scheme is empty. Import the general blacklist?"
msgstr ""
"Чорний список цієї схеми -- порожній. Імпортувати загальний чорний список?"
#: configuredialog.cpp:1425 configuredialog.cpp:1555
msgid "Do Not Import"
msgstr "Не імпортувати"
#: configuredialog.cpp:1437
msgid "General Autosuspend Blacklist"
msgstr "Чорний список режиму автосну"
#: configuredialog.cpp:1567
msgid "General Autodimm Blacklist"
msgstr "Чорний список автозатемнення"
#: configuredialog.cpp:1800 configuredialog.cpp:1843
msgid "Shutdown"
msgstr "Вимкнути"
#: configuredialog.cpp:1802 configuredialog.cpp:1846
msgid "Logout Dialog"
msgstr "Вікно виходу"
#: configuredialog.cpp:1805 configuredialog.cpp:1849 tdepowersave.cpp:197
#: tdepowersave.cpp:2525
msgid "Hibernate"
msgstr "Сон зі збереженням на диск"
#: configuredialog.cpp:1808 configuredialog.cpp:1852 tdepowersave.cpp:199
#: tdepowersave.cpp:2528
msgid "Hybrid Suspend"
msgstr "Гібридний Сон із Збереженням у RAM"
#: configuredialog.cpp:1811 configuredialog.cpp:1855 tdepowersave.cpp:195
#: tdepowersave.cpp:2531
msgid "Suspend"
msgstr "Сон із збереженням у RAM"
#: configuredialog.cpp:1814 configuredialog.cpp:1858 tdepowersave.cpp:191
#: tdepowersave.cpp:2534
msgid "Freeze"
msgstr "Заморозити"
#: configuredialog.cpp:1817 configuredialog.cpp:1861
msgid "CPU Powersave policy"
msgstr "Правила енергозбереження для ЦП"
#: configuredialog.cpp:1820 configuredialog.cpp:1864
msgid "CPU Dynamic policy"
msgstr "Динамічні правила для ЦП"
#: configuredialog.cpp:1823 configuredialog.cpp:1867
msgid "CPU Performance policy"
msgstr "Правила для швидкодії ЦП"
#: configuredialog.cpp:1826 configuredialog.cpp:1870
msgid "Set Brightness to"
msgstr "Встановити яскравість до"
#: countdowndialog.cpp:54 infodialog.cpp:76 infodialog.cpp:78 main.cpp:55
msgid "TDEPowersave"
msgstr "TDEPowersave"
#: countdowndialog.cpp:120 countdowndialog.cpp:175
msgid "%1 seconds"
msgstr "%1 секунд"
#: detaileddialog.cpp:61
msgid "TDEPowersave Information Dialog"
msgstr "Вікно інформації TDEPowersave"
#: detaileddialog.cpp:66
msgid "CPUs"
msgstr "Процесори"
#: detaileddialog.cpp:73 detaileddialog.cpp:459
msgid "Battery state:"
msgstr "Стан батареї:"
#: detaileddialog.cpp:79
msgid "Total:"
msgstr "Всього:"
#: detaileddialog.cpp:81 detaileddialog.cpp:83
#, c-format
msgid "Battery %1"
msgstr "Батарея %1"
#: detaileddialog.cpp:114
#, c-format
msgid "Processor %1"
msgstr "Процесор %1"
#: detaileddialog.cpp:230
msgid "not present"
msgstr "відсутня"
#: detaileddialog.cpp:243
msgid "charged"
msgstr "заряджена"
#: detaileddialog.cpp:245
msgid "%1:%2 h until charged"
msgstr "%1:%2 г. до закінчення зарядки"
#: detaileddialog.cpp:248
msgid "%1:%2 h remaining"
msgstr "%1:%2 г. залишилось"
#: detaileddialog.cpp:253 detaileddialog.cpp:447 detaileddialog.cpp:474
msgid "unknown"
msgstr "невідомий"
#: detaileddialog.cpp:330 detaileddialog.cpp:373
msgid "%v MHz"
msgstr "%v МГц"
#: detaileddialog.cpp:335 detaileddialog.cpp:368 dummy.cpp:58
msgid "deactivated"
msgstr "вимкнено"
#: detailed_Dialog.ui:323 detaileddialog.cpp:396
#, no-c-format
msgid "plugged in"
msgstr "з'єднаний"
#: detaileddialog.cpp:400
msgid "unplugged"
msgstr "виключено"
#: detaileddialog.cpp:418
msgid "Current Scheme: "
msgstr "Поточна схема: "
#: detaileddialog.cpp:435
msgid "Current CPU Frequency Policy:"
msgstr "Поточне правило керування частотою ЦП:"
#: configure_Dialog.ui:993 detaileddialog.cpp:441 tdepowersave.cpp:203
#, no-c-format
msgid "Dynamic"
msgstr "Динамічно"
#: detaileddialog.cpp:462
msgid "Critical"
msgstr "Критичний"
#: detaileddialog.cpp:465
msgid "Low"
msgstr "Низький"
#: detaileddialog.cpp:471
msgid "ok"
msgstr "гаразд"
#: detaileddialog.cpp:480 detaileddialog.cpp:483
msgid "Set brightness supported:"
msgstr "Підтримка керування яскравістю:"
#: detaileddialog.cpp:481
msgid "yes"
msgstr "так"
#: detaileddialog.cpp:484
msgid "no"
msgstr "ні"
#: detaileddialog.cpp:487 detaileddialog.cpp:491
msgid "TDE hardware subsystem:"
msgstr "Підсистема обладнання TDE:"
#: detaileddialog.cpp:488
msgid "active"
msgstr "активне"
#: detaileddialog.cpp:492
msgid "not available"
msgstr "не доступне"
#: dummy.cpp:36
msgid "If the current desktop user is inactive, dim the display to:"
msgstr ""
"Якщо поточний користувач стільниці не активний, зменшити яскравість екрана "
"до:"
#: dummy.cpp:37
msgid "Enable dim display on inactivity"
msgstr "Зменшити яскравість екрана при бездіяльності"
#: dummy.cpp:38
msgid "Blacklist"
msgstr "Чорний список"
#: dummy.cpp:39
msgid ""
"Here you can add programs which should, if running, prevent the dimming of "
"the display."
msgstr ""
"Сюди додайте програми, при виконанні яких, яскравість екрана не повинна "
"зменшуватись."
#: dummy.cpp:41
msgid "Would you like to import a predefined blacklist?"
msgstr "Хочете імпортувати готовий чорний список?"
#: dummy.cpp:42
msgid "Disable CPUs/Cores"
msgstr "Вимкнути процесори/їх ядра"
#: dummy.cpp:43
msgid "Max. running CPUs:"
msgstr "Макс. робочих процесорів:"
#: dummy.cpp:44
msgid "Max. running CPUs/Cores:"
msgstr "Макс. робочих процесорів/їх ядер:"
#: dummy.cpp:45
msgid "Min. running CPUs:"
msgstr "Мін. робочих процесорів:"
#: dummy.cpp:46
msgid "Min. running CPUs/Cores:"
msgstr "Мін. робочих процесорів/їх ядер:"
#: dummy.cpp:47
msgid "Enable to switch off CPUs/cores"
msgstr "Уможливити вимикання процесорів/їх ядер"
#: dummy.cpp:48
msgid "You have a multiprocessor/multicore machine."
msgstr "Ви маєте багатопроцесорний/багатоядровий комп'ютер."
#: dummy.cpp:49
msgid ""
"You can disable CPUs/cores to reduce power consumption and save battery "
"power."
msgstr ""
"Ви можете вимкнути процесори/ядра, щоб зменшити енерговитрати і заощадити "
"заряд батареї."
#: dummy.cpp:50
msgid "Device"
msgstr "Пристрій"
#: dummy.cpp:51
msgid "Devices"
msgstr "Пристрої"
#: dummy.cpp:52
msgid "Device class"
msgstr "Клас пристрою"
#: dummy.cpp:53
msgid "activate"
msgstr "увімкнути"
#: dummy.cpp:54
msgid "Activate"
msgstr "Увімкнути"
#: dummy.cpp:55
msgid "deactivate"
msgstr "вимкнути"
#: dummy.cpp:56
msgid "Deactivate"
msgstr "Вимкнути"
#: dummy.cpp:57
msgid "activated"
msgstr "увімкнено"
#: dummy.cpp:59
msgid "do nothing"
msgstr "нічого не робити"
#: dummy.cpp:60
msgid "Deactivate following devices:"
msgstr "Вимкнути наступні пристрої:"
#: dummy.cpp:61
msgid "Activate following devices"
msgstr "Увімкнути наступні пристрої"
#: dummy.cpp:62
msgid "Reactivate following devices"
msgstr "Заново увімкнути наступні пристрої"
#: dummy.cpp:63
msgid "Deactivate following device classes:"
msgstr "Вимкнути наступні класи пристроїв:"
#: dummy.cpp:64
msgid "Activate following devices classes"
msgstr "Увімкнути наступні класи пристроїв"
#: dummy.cpp:65
msgid "Reactivate following device classes"
msgstr "Заново увімкнути наступні класи пристроїв"
#: dummy.cpp:66
msgid "If the scheme switched all devices are again activated."
msgstr "Якщо змінено схему, то всі пристрої знов було увімкнено."
#: dummy.cpp:67
msgid "This is a experimental feature."
msgstr "Це експериментальна функціональність."
#: dummy.cpp:68
msgid "If you have problems with this feature, please report them."
msgstr "Якщо з цією функцією виникнуть проблеми, будь ласка, повідомте."
#: dummy.cpp:69
msgid "Select one of the available devices and click on "
msgstr "Виберіть один з наявних пристроїв і клацніть на "
#: dummy.cpp:70
msgid "Select one of the available device classes and click on "
msgstr "Виберіть один з наявних класів пристроїв і клацніть на "
#: dummy.cpp:71
msgid "Select one or more of the available devices and click on "
msgstr "Виберіть один або більше з наявних пристроїв і клацніть на "
#: dummy.cpp:72
msgid "Select one or more of the available device classes and click on "
msgstr "Виберіть один або більше з наявних класів пристроїв і клацніть на "
#: dummy.cpp:73
msgid ""
"Please note: If you e.g. deactivate a network device you may lose your "
"internet connection."
msgstr ""
"Примітка: Якщо ви, напр., вимкнете мережний пристрій, то можете втрати "
"з'єднання з Інтернетом."
#: dummy.cpp:75
msgid ""
"<b>Note:</b> If you select this option, the computer will suspend or standby "
"if the current user is inactive for the defined time. <br><br> This feature "
"can also produce problems with some programs, such as video players or cd "
"burner. These programs can be blacklisted by checking <b>Enable scheme-"
"specific blacklist</b> and click <b>Edit Blacklist...</b>. If this does not "
"help, report the problem or deactivate autosuspend.<br><br> Really use this "
"option?"
msgstr ""
"<b>Примітка:</b> Якщо ви виберете цей параметр, комп'ютер перейде в режим "
"сну або чергування, якщо поточний користувач бездіяльний протягом певного "
"часу. <br><br> Ця функціональність може призвести до проблем в деяких "
"програмах, таких як відеопрогравачах або програмах запису компакт-дисків. Ці "
"програми можна внести до чорного списку, увімкнувши параметр <b>Увімкнути "
"специфічний для схеми чорний список</b> і клацнувши <b>Змінити чорний "
"список...</b>. Якщо це не допоможе, повідомте про проблему або вимкніть "
"режим автосну.<br><br> Дійсно вживати цей параметр?"
#: dummy.cpp:82
msgid "Try to use only one CPU/Core."
msgstr "Намагатися вживати тільки один ЦП/ядро."
#: dummy.cpp:83
msgid ""
"Reduce power consumption by try to use only one CPU/Core instead of "
"spreading the work over all/multiple CPUs."
msgstr ""
"Зменшити енергоспоживання за допомогою вживання одного процесора/ядра, "
"замість розподілу роботи для виконання на всіх/декількох ЦП."
#: dummy.cpp:87
msgid "Could not load the global configuration."
msgstr "Не вдалось завантажити глобальну конфігурацію."
#: dummy.cpp:88
msgid "Could not load the requested scheme configuration."
msgstr "Не вдалось завантажити конфігурацію необхідної схеми."
#: dummy.cpp:89
msgid "Configure the current scheme."
msgstr "Налаштувати поточну схему."
#: dummy.cpp:90
msgid "Try loading the default configuration."
msgstr "Спробуйте завантажити типову конфігурацію."
#: dummy.cpp:91
msgid "Maybe the global configuration file is empty or missing."
msgstr "Можливо, файл глобальної конфігурації порожній або відсутній."
#: dummy.cpp:94
msgid "Cannot connect to D-Bus. The D-Bus daemon may not be running."
msgstr "Неможливо приєднатись до D-BUS. Можливо, не запущено даемон D-BUS."
#: dummy.cpp:95
msgid ""
"Scheme switched to %1. \n"
" Deactivate following devices: %2"
msgstr ""
"Схему перемкнено на %1. \n"
"Вимкнути наступні пристрої: %2"
#: dummy.cpp:96
msgid ""
"Scheme switched to %1. \n"
" Activate following devices: %2"
msgstr ""
"Схему перемкнено на %1. \n"
"Увімкнути наступні пристрої: %2"
#: dummy.cpp:97
msgid "Report ..."
msgstr "Звіт..."
#: dummy.cpp:98
msgid "Suspend mode is not supported on your machine."
msgstr "Режим сну зі збереженням у RAM не підтримується вашою машиною."
#: dummy.cpp:99
msgid "Additionally, please mail the output of %1 to %2 . Thanks!"
msgstr "Крім того, будь ласка, надішліть вивід з %1 до %2. Дякуємо!"
#: dummy.cpp:100
msgid "Power consumption"
msgstr "Споживання електроенергії"
#: dummy.cpp:103
msgid "TDEScreensaver not found."
msgstr "TDEScreensaver не знайдено."
#: dummy.cpp:104
msgid "Try locking with XScreensaver or xlock."
msgstr "Спробуйте заблокувати за допомогою XScreensaver або xlock."
#: dummy.cpp:105
msgid "XScreensaver not found."
msgstr "XScreensaver не знайдено."
#: dummy.cpp:106
msgid "Try locking the screen with xlock."
msgstr "Спробуйте заблокувати екран за допомогою xlock."
#: dummy.cpp:107
msgid ""
"XScreensaver and xlock not found. It is not possible to lock the screen. "
"Check your installation."
msgstr ""
"Не знайдено ні XScreensaver, ні xlock. Неможливо заблокувати екран. "
"Перевірте вашу інсталяцію."
#: dummy.cpp:111
msgid "D-Bus daemon:"
msgstr "Даемон D-BUS:"
#: dummy.cpp:112
msgid "ConsoleKit daemon:"
msgstr "Даемон ConsoleKit:"
#: dummy.cpp:113
msgid "Autosuspend activated:"
msgstr "Автоперехід в режим сну активовано:"
#: dummy.cpp:114
msgid "Autodimm activated:"
msgstr "Автозатемнення активовано:"
#: dummy.cpp:115
msgid "enabled"
msgstr "увімкнено"
#: dummy.cpp:116
msgid "Session active:"
msgstr "Активний сеанс:"
#: dummy.cpp:119
msgid "The display get dimmed down to %1% in: "
msgstr "Дисплей буде затемнено до %1% через: "
#: dummy.cpp:122
msgid "Could not call %1. The current desktop session is not active."
msgstr "Не вдалося викликати %1. Поточний стільничний сеанс - неактивний."
#: dummy.cpp:123
msgid "Could not set %1. The current desktop session is not active."
msgstr "Не вдалося встановити %1. Поточний стільничний сеанс - неактивний."
#: dummy.cpp:124
msgid "Stopped %1. The current desktop session is now inactive."
msgstr "Зупинено %1. Поточний стільничний сеанс тепер активний."
#: dummy.cpp:125
msgid "Restarted %1. The current desktop session is now active again."
msgstr "Перезапущено %1. Поточний стільничний сеанс тепер знову активний."
#: inactivity.cpp:328
msgid ""
"Could not start 'pidof'. Could not autosuspend the machine.\n"
"Please check your installation."
msgstr ""
"Не вдалося запустити \"pidof\". Не вдалося автоматично перемкнути комп'ютер "
"в режим сну.\n"
"Будь ласка, перевірте ваше встановлення."
#: logviewer.cpp:44
#, c-format
msgid "TDEPowersave Logfile Viewer: %1"
msgstr "Переглядач файлів журналу TDEPowersave: %1"
#: logviewer.cpp:89
msgid "File already exist. Overwrite the file?"
msgstr "Файл вже існує. Перезаписати його?"
#: logviewer.cpp:90 logviewer.cpp:97
msgid "Error while save logfile"
msgstr "Помилка під час збереження файла журналу"
#: logviewer.cpp:95
msgid "File already exist."
msgstr "Файл вже існує."
#: logviewer.cpp:98
msgid "Try other filename ..."
msgstr "Спробуйте іншу назву файла ..."
#: main.cpp:43
msgid "TDE Frontend for Power Management, Battery Monitoring and Suspend"
msgstr "Оболонка TDE для Менеджеру Живлення, Монітору Батареї та Призупинки"
#: main.cpp:45
msgid "Force a new check for ACPI support"
msgstr "Примусово наново перевірити підтримку ACPI"
#: main.cpp:46
msgid "Trace function entry and leave points for debug\n"
msgstr "Стежити за входом функції й залишити точки для зневадження\n"
#: main.cpp:56
msgid ""
"(c) 2004-2006, Danny Kukawka\n"
"(c) 2004 Thomas Renninger"
msgstr ""
"(c) 2004-2006, Danny Kukawka\n"
"(c) 2004 Thomas Renninger"
#: main.cpp:59
msgid "Current maintainer"
msgstr "Поточний супровід"
#: main.cpp:62
msgid "Powersave developer and for D-Bus integration"
msgstr "Розробка Powersave і інтеграція з DBUS"
#: main.cpp:64
msgid "Powersave developer and tester"
msgstr "Розробник і випробовувач Powersave"
#: main.cpp:66
msgid "Added basic detailed dialog"
msgstr "Додав просте вікно подробиць"
#: main.cpp:67
msgid "Packaging Debian and Ubuntu"
msgstr "Пакунки для Debian і Ubuntu"
#: suspenddialog.cpp:74
msgid "Preparing Suspend..."
msgstr "Підготовка до режиму сну..."
#: tdepowersave.cpp:121
msgid "Execute configured power button action"
msgstr "Виконати сконфігуровану дію кнопки живлення"
#: tdepowersave.cpp:123
msgid "Suspend configured power button action"
msgstr "Приспати у RAM сконфігуровану дію кнопки живлення"
#: tdepowersave.cpp:125
msgid "Hibernate configured power button action"
msgstr "Приспати на диск сконфігуровану дію кнопки живлення"
#: tdepowersave.cpp:178
msgid "Configure TDEPowersave..."
msgstr "Налаштувати TDEPowersave..."
#: configure_Dialog.ui:1948 tdepowersave.cpp:181
#, no-c-format
msgid "Configure Notifications..."
msgstr "Налаштувати сповіщення..."
#: tdepowersave.cpp:185
msgid "Start YaST2 Power Management Module..."
msgstr "Запуск модуля керування живленням - YaST2..."
#: tdepowersave.cpp:193 tdepowersave.cpp:2537
msgid "Standby"
msgstr "Режим чергування"
#: tdepowersave.cpp:201 tdepowersave.cpp:208
msgid "Set CPU Frequency Policy"
msgstr "Вказати правило керування частотою процесора"
#: tdepowersave.cpp:215 tdepowersave.cpp:216
msgid "Set Active Scheme"
msgstr "Наставити активну схему"
#: tdepowersave.cpp:222
msgid "Disable Actions on Inactivity"
msgstr "Вимкнути дії при бездіяльності"
#: tdepowersave.cpp:286 tdepowersave.cpp:637 tdepowersave.cpp:645
#: tdepowersave.cpp:692 tdepowersave.cpp:699 tdepowersave.cpp:748
#: tdepowersave.cpp:755 tdepowersave.cpp:804 tdepowersave.cpp:811
#: tdepowersave.cpp:860 tdepowersave.cpp:867 tdepowersave.cpp:915
#: tdepowersave.cpp:922 tdepowersave.cpp:1314 tdepowersave.cpp:1435
#: tdepowersave.cpp:1464 tdepowersave.cpp:2427
msgid "WARNING"
msgstr "ПОПЕРЕДЖЕННЯ"
#: tdepowersave.cpp:286
msgid "Cannot find any schemes."
msgstr "Не вдається знайти якусь схему."
#: tdepowersave.cpp:469
msgid "No information about battery and AC status available"
msgstr "Нема інформації про стан батареї і адаптера живлення"
#: tdepowersave.cpp:472
msgid "Plugged in -- fully charged"
msgstr "Увімкнений в електромережу - повний заряд"
#: tdepowersave.cpp:476
msgid "Plugged in"
msgstr "Увімкнений в електромережу"
#: tdepowersave.cpp:480
msgid "Plugged in -- %1% charged (%2:%3 h until full charged)"
msgstr "Увімкнено - %1% заряджено (%2: %3 год. до повного заряду)"
#: tdepowersave.cpp:483
msgid "Plugged in -- %1% charged (%2:%3 remaining hours)"
msgstr "Увімкнений в електромережу -- %1% заряду (залишилось %2:%3 год)"
#: tdepowersave.cpp:487 tdepowersave.cpp:491
msgid "Plugged in -- %1% charged"
msgstr "Увімкнений в електромережу -- %1% заряду"
#: tdepowersave.cpp:490
msgid "Plugged in -- no battery"
msgstr "Увімкнений в електромережу -- немає батареї"
#: tdepowersave.cpp:496
msgid "Running on batteries -- %1% charged (%2:%3 hours remaining)"
msgstr "Працює на батареї -- %1% заряду (залишилось %2:%3 год)"
#: tdepowersave.cpp:500
msgid "Running on batteries -- %1% charged"
msgstr "Працює на батареї -- %1% заряду"
#: tdepowersave.cpp:507
msgid " -- battery is charging"
msgstr " -- батарея заряджається"
#: tdepowersave.cpp:638 tdepowersave.cpp:646
msgid "Could not start YaST Power Management Module. Check if it is installed."
msgstr ""
"Не вдалось запустити модуль керування живленням YaST. Перевірте чи його "
"встановлено."
#: tdepowersave.cpp:692
msgid "Hibernation failed"
msgstr "Режим сну зі збереженням на диск зазнав невдачі"
#: tdepowersave.cpp:700
msgid "Hibernation disabled by administrator."
msgstr "Режим сну із збереженням на диск заблоковано адміністратором."
#: tdepowersave.cpp:748
msgid "Hybrid Suspend failed"
msgstr "Гібридний Сон із Збереженням у RAM зазнав невдачі"
#: tdepowersave.cpp:756
msgid "Hybrid Suspend disabled by administrator."
msgstr "Режим Гібридного Сну із збереженням у RAM заблоковано адміністратором."
#: tdepowersave.cpp:804
msgid "Suspend mode failed"
msgstr "Режим сну із збереженням у RAM зазнав невдачі"
#: tdepowersave.cpp:812
msgid "Suspend mode disabled by administrator."
msgstr "Режим сну із збереженням у RAM вимкнено адміністратором."
#: tdepowersave.cpp:860
msgid "Freeze failed"
msgstr "Замороження зазнало невдачі"
#: tdepowersave.cpp:867
msgid "Freeze disabled by administrator."
msgstr "Замороження вимкнено адміністратором."
#: tdepowersave.cpp:915
msgid "Standby failed"
msgstr "Режим чергування зазнав невдачі"
#: tdepowersave.cpp:922
msgid "Standby disabled by administrator."
msgstr "Режим чергування заблоковано адміністратором."
#: tdepowersave.cpp:996
msgid "Inactivity detected."
msgstr "Виявлено бездіяльність."
#: tdepowersave.cpp:997
msgid "To stop the %1 press the 'Cancel' button before the countdown expires."
msgstr ""
"Щоб зупинити %1, натисніть кнопку \"Скасувати\", перш ніж закінчиться відлік."
#: configure_Dialog.ui:556 tdepowersave.cpp:998
#, no-c-format
msgid "Autosuspend"
msgstr "Автоматично в режим сну"
#: tdepowersave.cpp:999
msgid "The computer autosuspend in: "
msgstr "Комп'ютер перейде в режим сну через: "
#: tdepowersave.cpp:1032
msgid "System is going into suspend mode now"
msgstr "Система тепер переходить в режим сну"
#: tdepowersave.cpp:1227
msgid "Could not call DCOP interface to umount external media."
msgstr ""
"Не вдалося викликати інтерфейс DCOP для демонтування зовнішнього носія."
#: tdepowersave.cpp:1232
msgid ""
"Could not umount external media before suspend/standby. \n"
" (Reason: %1)\n"
" \n"
" Would you like to continue suspend/standby anyway? \n"
"(Warning: Continue suspend can cause data loss!)"
msgstr ""
"Не вдалося демонтувати зовнішній носій перед режимом сну/чергування. \n"
" (Причина: %1)\n"
" \n"
" Хочете продовжити сон/чергування, попри все? \n"
"(Увага:продовження сну може спричинити втрату даних!)"
#: tdepowersave.cpp:1240
#, c-format
msgid "Error while prepare %1"
msgstr "Помилка під час приготування %1"
#: tdepowersave.cpp:1241
msgid "Suspend anyway"
msgstr "В режим сну, попри все"
#: tdepowersave.cpp:1241
msgid "Cancel suspend"
msgstr "Скасувати перехід в режим сну"
#: tdepowersave.cpp:1315
msgid ""
"Could not lock the screen. There may be a problem with the selected \n"
"lock method or something else."
msgstr ""
"Не вдалося заблокувати екран. Можливо, існує проблема з \n"
"вибраним методом блокування або якась інша."
#: tdepowersave.cpp:1337
msgid "The Lid was closed."
msgstr "Лептоп закрито."
#: tdepowersave.cpp:1349
msgid "The Lid was opened."
msgstr "Лептоп відкрито."
#: tdepowersave.cpp:1417
msgid "Start tdepowersave automatically when you log in?"
msgstr "Автоматично запускати tdepowersave при вході у систему?"
#: tdepowersave.cpp:1418
msgid "Question"
msgstr "Питання"
#: tdepowersave.cpp:1419
msgid "Start Automatically"
msgstr "Запускати автоматично"
#: tdepowersave.cpp:1419
msgid "Do Not Start"
msgstr "Не запускати"
#: tdepowersave.cpp:1436
msgid "CPU Freq Policy %1 could not be set."
msgstr "Не вдається вказати правило частоти ЦП %1."
#: tdepowersave.cpp:1465
msgid "Scheme %1 could not be activated."
msgstr "Не вдалось активувати схему %1."
#: tdepowersave.cpp:2087
msgid ""
"Battery state changed to WARNING -- remaining time: %1 hours and %2 minutes."
msgstr ""
"Заряд батареї змінився на ПОПЕРЕДЖЕННЯ -- залишилось часу:%1 год. і %2 хв."
#: tdepowersave.cpp:2096
msgid ""
"Battery state changed to LOW -- remaining time: %1 hours and %2 minutes."
msgstr "Заряд батареї змінився на НИЗЬКИЙ -- залишилось часу:%1 год. і %2 хв."
#: tdepowersave.cpp:2107
msgid ""
"Battery state changed to CRITICAL -- remaining time: %1 hours and %2 "
"minutes.\n"
"Shut down your system or plug in the power cable immediately. Otherwise the "
"machine\n"
"will go shutdown in 30 seconds"
msgstr ""
"Заряд батареї змінився на КРИТИЧНИЙ -- залишилось часу:%1 год. і %2 хв.\n"
"Вимкніть вашу систему або негайно увімкніть живлення з електромережі. "
"Інакше,\n"
"машина почне вимкнення через 30 секунд"
#: tdepowersave.cpp:2118
msgid ""
"Battery state changed to CRITICAL -- remaining time: %1 hours and %2 "
"minutes.\n"
"Shut down your system or plug in the power cable immediately."
msgstr ""
"Заряд батареї змінився на КРИТИЧНИЙ -- залишилось часу:%1 год. і %2 хв.\n"
"Вимкніть вашу систему або негайно увімкніть живлення з електромережі."
#: tdepowersave.cpp:2260
msgid "AC adapter plugged in"
msgstr "Адаптер AC увімкнено в електромережу"
#: tdepowersave.cpp:2262
msgid "AC adapter unplugged"
msgstr "Адаптер AC вимкнено з електромережі"
#: tdepowersave.cpp:2301
#, c-format
msgid "Switched to scheme: %1"
msgstr "Перемкнено на схему: %1"
#: tdepowersave.cpp:2318 tdepowersave.cpp:2323 tdepowersave.cpp:2328
#: tdepowersave.cpp:2333 tdepowersave.cpp:2338
msgid "System is going into %1 now."
msgstr "Система тепер переходить в %1."
#: tdepowersave.cpp:2319 tdepowersave.cpp:2389
msgid "hibernation"
msgstr "сон зі збереженням на диск"
#: tdepowersave.cpp:2324 tdepowersave.cpp:2394
msgid "hybrid suspension"
msgstr "гібридний сон зі збереженням у RAM"
#: tdepowersave.cpp:2329 tdepowersave.cpp:2399
msgid "sleep"
msgstr "сон"
#: tdepowersave.cpp:2334 tdepowersave.cpp:2404
msgid "freeze"
msgstr "замороження"
#: tdepowersave.cpp:2339 tdepowersave.cpp:2409
msgid "standby"
msgstr "чергування"
#: tdepowersave.cpp:2388 tdepowersave.cpp:2393 tdepowersave.cpp:2398
#: tdepowersave.cpp:2403 tdepowersave.cpp:2408
#, c-format
msgid "System is resumed from %1."
msgstr "Систему відновлено з %1."
#: tdepowersave.cpp:2428
msgid "Could not remount (all) external storage media."
msgstr "НЕ вдалося перемонтувати (всі) зовнішні носії."
#: tdepowersave.cpp:2436
msgid "An unknown error occurred while %1. The errorcode is: '%2'"
msgstr "Трапилась невідома помилка під час %1. Помилка коду: \"%2\""
# power-off message
#: tdepowersave.cpp:2441
msgid "Do you want to have a look at the log file?"
msgstr "Хочете переглянути файл журналу?"
#: tdepowersave.cpp:2442 tdepowersave.cpp:2476
#, c-format
msgid "Error while %1"
msgstr "Помилка під час %1"
#: blacklistedit_Dialog.ui:16
#, no-c-format
msgid "Autosuspend Blacklist Edit"
msgstr "Змінити чорний список режиму автосну"
#: configure_Dialog.ui:24
#, no-c-format
msgid "TDEPowersave Settings"
msgstr "Параметри TDEPowersave"
#: configure_Dialog.ui:147
#, no-c-format
msgid "Scheme Settings"
msgstr "Параметри схеми"
#: configure_Dialog.ui:185
#, no-c-format
msgid "Screen Saver and DPMS"
msgstr "Зберігач екрана і DPMS"
#: configure_Dialog.ui:199
#, no-c-format
msgid "Enable specific display power management"
msgstr "Ввімкнути певне керування живленням дисплея"
#: configure_Dialog.ui:210
#, no-c-format
msgid "Standby after:"
msgstr "Режим чергування після:"
#: configure_Dialog.ui:241
#, no-c-format
msgid "Only blank the screen"
msgstr "Тільки затемнити екран"
#: configure_Dialog.ui:252
#, no-c-format
msgid "Disable screen saver"
msgstr "Ввімкнути зберігач екрану"
#: configure_Dialog.ui:260
#, no-c-format
msgid "Enable specific screensaver settings"
msgstr "Увімкнути певні параметри зберігача екрана"
#: configure_Dialog.ui:271
#, no-c-format
msgid "Suspend after:"
msgstr "Режим сну після:"
#: configure_Dialog.ui:302
#, no-c-format
msgid "Power off after:"
msgstr "Вимкнути живлення після:"
#: configure_Dialog.ui:316
#, no-c-format
msgid "Disable display power management"
msgstr "Ввімкнути керування живленням дисплея"
#: configure_Dialog.ui:327 configure_Dialog.ui:344 configure_Dialog.ui:361
#: configure_Dialog.ui:666 configure_Dialog.ui:960
#, no-c-format
msgid " min"
msgstr " хв"
#: configure_Dialog.ui:380
#, no-c-format
msgid "Brightness"
msgstr "Яскравість"
#: configure_Dialog.ui:394
#, no-c-format
msgid "Settings"
msgstr "Параметри"
#: configure_Dialog.ui:425
#, no-c-format
msgid "Reset"
msgstr "Скинути"
#: configure_Dialog.ui:523
#, no-c-format
msgid "Enable scheme specific Brightness settings"
msgstr "Увімкнути параметри яскравості для схем"
#: configure_Dialog.ui:567
#, no-c-format
msgid "Enable autosuspend"
msgstr "Увімкнути автоперехід в режим сну"
#: configure_Dialog.ui:622 configure_Dialog.ui:796
#, no-c-format
msgid "Enable scheme-specific blacklist"
msgstr "Увімкнути специфічний для схеми чорний список"
#: configure_Dialog.ui:641 configure_Dialog.ui:871
#, no-c-format
msgid "after:"
msgstr "після:"
#: configure_Dialog.ui:683 configure_Dialog.ui:807
#, no-c-format
msgid "Edit Blacklist..."
msgstr "Змінити чорний список..."
#: configure_Dialog.ui:736 configure_Dialog.ui:832
#, no-c-format
msgid "If the current desktop user is inactive the computer will:"
msgstr "Якщо користувач стільниці бездіяльний, то:"
#: configure_Dialog.ui:752
#, no-c-format
msgid "Autodimm"
msgstr "Автозатемнення"
#: configure_Dialog.ui:763
#, no-c-format
msgid "Enable autodimm the display"
msgstr "Увімкнути автозатемнення дисплея"
#: configure_Dialog.ui:896 configure_Dialog.ui:1348 configure_Dialog.ui:1370
#: configure_Dialog.ui:1392 configure_Dialog.ui:1414 configure_Dialog.ui:1436
#: configure_Dialog.ui:1458
#, no-c-format
msgid " %"
msgstr " %"
#: configure_Dialog.ui:918
#, no-c-format
msgid "dimm to:"
msgstr "затемнити до:"
#: configure_Dialog.ui:979
#, no-c-format
msgid "CPU Frequency Policy"
msgstr "Правило для частоти ЦП"
#: configure_Dialog.ui:1027
#, no-c-format
msgid "Set CPU Frequency Policy:"
msgstr "Вкажіть правило для частоти ЦП:"
#: configure_Dialog.ui:1071
#, no-c-format
msgid "Disable Notifications"
msgstr "Вимкнути сповіщення"
#: configure_Dialog.ui:1115
#, no-c-format
msgid "New"
msgstr "Новий"
#: configure_Dialog.ui:1146
#, no-c-format
msgid "General Settings"
msgstr "Загальні параметри"
#: configure_Dialog.ui:1167
#, no-c-format
msgid "Battery"
msgstr "Батарея"
#: configure_Dialog.ui:1192
#, no-c-format
msgid ""
"Define the battery warning levels (in percentage) and the related action if "
"the level get reached:"
msgstr ""
"Вкажіть рівні попередження про розрядження батареї (у відсотках) і "
"відповідну дію, якщо досягнуто певного рівня:"
#: configure_Dialog.ui:1212
#, no-c-format
msgid "Warning level:"
msgstr "Рівень попередження:"
#: configure_Dialog.ui:1229
#, no-c-format
msgid "Low level:"
msgstr "Низький рівень:"
#: configure_Dialog.ui:1246
#, no-c-format
msgid "Critical level:"
msgstr "Критичний рівень:"
#: configure_Dialog.ui:1274 configure_Dialog.ui:1285 configure_Dialog.ui:1296
#, no-c-format
msgid "if reached call:"
msgstr "якщо досягнуто, викликати:"
#: configure_Dialog.ui:1477
#, no-c-format
msgid "Button Events"
msgstr "Події кнопок"
#: configure_Dialog.ui:1502
#, no-c-format
msgid ""
"Define the action which should be executed if the related button get pressed:"
msgstr "Вкажіть дію, яку треба виконати при натисканні відповідної кнопки:"
#: configure_Dialog.ui:1516
#, no-c-format
msgid "Suspend-to-disk Button:"
msgstr "Кнопка сну із збереженням на диск:"
#: configure_Dialog.ui:1527
#, no-c-format
msgid "Suspend button:"
msgstr "Кнопка сну:"
#: configure_Dialog.ui:1538
#, no-c-format
msgid "Lid close Button:"
msgstr "Кнопка закриття кришки:"
#: configure_Dialog.ui:1549
#, no-c-format
msgid "Power Button:"
msgstr "Кнопки живлення:"
#: configure_Dialog.ui:1694
#, no-c-format
msgid "Default Schemes"
msgstr "Типові схеми"
#: configure_Dialog.ui:1719
#, no-c-format
msgid ""
"Select the following schemes as default if the system is running on AC or on "
"batteries."
msgstr ""
"Виберіть наступні схеми як типові, якщо система живиться від електромережі "
"або від батареї."
#: configure_Dialog.ui:1733
#, no-c-format
msgid "Battery scheme:"
msgstr "Схема батареї:"
#: configure_Dialog.ui:1800
#, no-c-format
msgid "AC scheme:"
msgstr "Схема ел. мережі:"
#: configure_Dialog.ui:1833
#, no-c-format
msgid "Lock Screen"
msgstr "Заблокувати екран"
#: configure_Dialog.ui:1844
#, no-c-format
msgid "Lock screen before suspend or standby"
msgstr "Блокувати екран перед режимом сну або чергування"
#: configure_Dialog.ui:1877
#, no-c-format
msgid "Lock screen with:"
msgstr "Заблокувати екран за допомогою:"
#: configure_Dialog.ui:1888
#, no-c-format
msgid "Lock screen on lid close"
msgstr "Блокувати екран при закритті кришки"
#: configure_Dialog.ui:1937
#, no-c-format
msgid "Notifications"
msgstr "Сповіщення"
#: configure_Dialog.ui:1992
#, no-c-format
msgid "Autostart"
msgstr "Автозапуск"
#: configure_Dialog.ui:2003
#, no-c-format
msgid "Never ask me again on exit"
msgstr "Ніколи знов не запитувати при виході"
#: configure_Dialog.ui:2011
#, no-c-format
msgid "TDEPowersave starts automatically on login"
msgstr "TDEPowersave запускається автоматично при вході в систему"
#: configure_Dialog.ui:2046
#, no-c-format
msgid "General Blacklists"
msgstr "Загальні чорні списки"
#: configure_Dialog.ui:2057
#, no-c-format
msgid "Edit Autosuspend Blacklist..."
msgstr "Змінити чорний список режиму автосну..."
#: configure_Dialog.ui:2099
#, no-c-format
msgid "Edit Autodimm Blacklist..."
msgstr "Змінити чорний список автозатемнення..."
#: countdown_Dialog.ui:58
#, no-c-format
msgid "Alt+C"
msgstr "Alt+C"
#: detailed_Dialog.ui:24
#, no-c-format
msgid "tdepowersave"
msgstr "tdepowersave"
#: detailed_Dialog.ui:46
#, no-c-format
msgid "General Information"
msgstr "Загальна інформація"
#: detailed_Dialog.ui:208
#, no-c-format
msgid "Battery Status"
msgstr "Стан батареї"
#: detailed_Dialog.ui:260
#, no-c-format
msgid "AC Adapter"
msgstr "Адаптер живлення"
#: detailed_Dialog.ui:344
#, no-c-format
msgid "Power Consumption: "
msgstr "Споживання Електрики: "
#: detailed_Dialog.ui:468
#, no-c-format
msgid "Processor Status"
msgstr "Стан процесора"
#: log_viewer.ui:16
#, no-c-format
msgid "Form1"
msgstr "Form1"
#: log_viewer.ui:51
#, no-c-format
msgid "Save As ..."
msgstr "Зберегти як..."
#~ msgid "&TDEPowersave Handbook"
#~ msgstr "Підручник &TDEPowersave"
#~ msgid "&Report a bug ..."
#~ msgstr "&Надіслати звіт про помилку..."
#~ msgid "&About TDEPowersave"
#~ msgstr "&Про TDEPowersave"
#~ msgid "Delete"
#~ msgstr "Вилучити"
# cancel button label
#~ msgid "Cancel"
#~ msgstr "Скасувати"
#~ msgid "Import"
#~ msgstr "Імпортувати"
#~ msgid "Miscellaneous"
#~ msgstr "Різне"
#~ msgid "Warning"
#~ msgstr "Попередження"
#~ msgid "&Help"
#~ msgstr "&Довідка"
# ok button label
#~ msgid "OK"
#~ msgstr "Гаразд"
#~ msgid "Add"
#~ msgstr "Додати"
#~ msgid "Remove"
#~ msgstr "Вилучити"
#~ msgid "Apply"
#~ msgstr "Застосувати"
#~ msgid "Help"
#~ msgstr "Довідка"
# cancel button label
#, fuzzy
#~ msgid "&Cancel"
#~ msgstr "Скасувати"
#~ msgid "Information"
#~ msgstr "Інформація"
#~ msgid "Close"
#~ msgstr "Закрити"
#~ msgid "running"
#~ msgstr "запущено"
#~ msgid "not running"
#~ msgstr "не запущено"
#~ msgid ""
#~ "The D-Bus daemon is not running.\n"
#~ "Starting it will provide full functionality: /etc/init.d/dbus start"
#~ msgstr ""
#~ "Не запущено даемон DBUS. Його запуск надасть\n"
#~ "повну функціональність: /etc/init.d/messagebus start"
#~ msgid "Don't show this message again."
#~ msgstr "Не показувати це повідомлення знов."
#~ msgid "ERROR"
#~ msgstr "ПОМИЛКА"
#~ msgid "Error"
#~ msgstr "Помилка"