BSD"> Minix"> ]> Thad McGinnis

ctmcginnis@compuserve.com

Nicolas Goutte

goutte@kde.org

Bernd Johannes Wuebben

wuebben@math.cornell.edu

Developer Chris Howells

howells@kde.org

Developer (User Interface re-design) Adriaan de Groot

groot@kde.org

Developer (Add BSD support) Lauri Watts Reviewer

lauri@kde.org

2005-06-01 3.5 2000 Thad McGinnis 2005 Nicolas Goutte &FDLNotice; &kfloppy; Formatter is a utility that provides a straightforward graphical means to format 3.5" and 5.25" floppy disks. KDE kfloppy floppy format &kfloppy; Formatter is a utility that provides a straightforward graphical means to format 3.5" and 5.25" floppy disks. &kfloppy; depends on external programs and therefore currently works only with &Linux; and &BSD;. Depending if you are using &kfloppy; on &Linux; or on &BSD;, &kfloppy; has slightly different features. Make sure that your floppy disk is not mounted. &kfloppy; cannot format a mounted floppy disk. Starting &kfloppy; opens a single window by which the user may choose appropriate settings and control the formatting process. These options and controls are detailed below. Make sure that your floppy disk is not mounted. &kfloppy; cannot format a mounted floppy disk. The settings are chosen by means of three drop down boxes located at the top left center of &kfloppy;. Clicking on the top drop down box, which is labeled Floppy drive:, offers the user the following two choices: Primary Secondary Clicking on the second drop down box from the top, which is labeled Size:, offers the user the following four choices: 3.5" 1.44MB 3.5" 720KB 5.25" 1.2MB 5.25" 360KB The &Linux; version of &kfloppy; has also a choice of size named: Auto-Detect The 800KB disk format used by &Mac; floppy drives cannot be supported on PC floppy drives since they are not capable of formatting disks in that fashion. The third drop down box, labeled File System, offers the user the following choices, if they are applicable: Dos This selection will have &kfloppy; place the MS-DOS/&Windows; type of file system on the diskette. The user will most likely want to choose this system if she or he will be using the diskette with those operating systems as they do not recognize other system types. (This is supported for &Linux; and &BSD;.) ext2 This selection will have &kfloppy; place the type of file system on the diskette which is most commonly used with &Linux;, however seldomly on floppy disks. (This is supported for &Linux; and &BSD;.) UFS This selection will have &kfloppy; place the type of file system on the diskette which is most commonly used with FreeBSD. The user will likely want to choose this system if he or she will only be using the floppy disk with FreeBSD. (This is supported for &BSD; only.) Minix This selection will have &kfloppy; place the type of file system on the diskette which often used on floppy disks used with &Linux;, (This is supported for &Linux; only.) Within the outline of a box in the left center of &kfloppy; the user may find a set of five formatting options. The top two are a pair of radio buttons. This term (radio buttons) indicates a set of options among which only one can be selected - in the same way that only one preset channel selection may be set on a car radio.The bottom two options are for labeling the diskette. All are explained below: &kfloppy; can format a disk in the following two ways: Quick Format This simply puts the new file system on the disk. All data on the disk will be lost, even if the data itself will not erased. Zero out and quick format This format first puts zeros on the disk and then creates the new file system. All data on the disk will be erased. Full Format A full format reallocates the tracks and sectors, puts the selected file system on the disk, and then verifies the format, blocking out any bad sectors it finds. All data on the disk will be erased. This tells &kfloppy; to check that the formatting was correctly written to the floppy. This allows bad sectors to be identified. If bad sectors a found during the verify phase of a Full Format, the formatting is aborted and the file system is not written! The bottom two features allow the user to add (or change) a label to the diskette. If the Volume label: check box is selected then the user can enter a name (label) for the diskette that is to be formatted in the text box located immediately below. When the diskette is subsequently formatted the label will be written to the diskette. Due to a limitation of the DOS file system, a label can only be at most 11 characters long. For simplification, &kfloppy; assumes that this limit is true for all file systems. The file system &Minix; cannot have any volume label. In this case, &kfloppy; will ignore the volume label. There are three buttons located vertically along the right side of &kfloppy;. Format This button initiates the formatting process. Once the user is sure that all the settings are correct he or she may begin the process by clicking on this button. There will be a change in the two long rectangular boxes that span the bottom of &kfloppy;. The upper box is a status indicator that gives information about the process underway, especially the error encountered during the processing. The lower box is a progress bar. This displays both graphically and numerically the progress of first the formatting and then the verification. Before starting it appears to be empty - showing only the figure 0% in the center. As each process takes place the progress is tracked graphically as the box fills from left to right. At the same time the number in the center will increase reflecting the precise percentage of the process that has been completed. As &kfloppy; uses external programs to format the floppy disk, it has to rely on these programs to give the right information for being able to display the progress bar. Unfortunately, this is not the case. Especially, the programs writing the file systems do not return enough data, so that the progress bar will remain at 0%. Make sure that your floppy disk is not mounted. &kfloppy; cannot format a mounted floppy disk. &kfloppy; does not unmount the floppy by itself, as this could mean that the user may overwrite a floppy disk with important data on it. Help This invokes the &kde; help system starting at the &kfloppy; help pages (this document). Report Bug Report a problem to the &kde; team. About KFloppy This displays version and author information of &kfloppy;. About KDE This displays version and author information of KDE. Quit Clicking on this button will close &kfloppy;. Though &kfloppy; may most often be started from the &kde; program menu, or a desktop icon, it can also be opened at the command line prompt of a terminal window. There are a few options that are available when doing this. They are: kfloppy --help This lists the most basic options available at the command line. kfloppy --help-qt This lists the options available for changing the way &kfloppy; interacts with &Qt;. kfloppy --help-kde This lists the options available for changing the way &kfloppy; interacts with KDE. kfloppy --help-all This lists all of the command line options. kfloppy --author Lists &kfloppy;'s author in the terminal window kfloppy --version Lists version information for &Qt;, &kde;, and &kfloppy;. Also available through kfloppy -V &kfloppy; Formatter Program Copyright 1997 - 2000 Bernd Johannes Wuebben wuebben@math.cornell.edu &kfloppy; Formatter Program Copyright 2002 Adriaan de Groot groot@kde.org &kfloppy; Formatter Program Copyright 2004, 2005 Nicolas Goutte goutte@kde.org Documentation Copyright 2000 by Thad McGinnis ctmcginnis@compuserve.com. Documentation Copyright 2005 by Nicolas Goutte goutte@kde.org. This version of the &kfloppy; Handbook is based on the original by David Rugge davidrugge@mindspring.com &underFDL; &underGPL; As already written earlier in this handbook, &kfloppy; works with the help of external programs to do the different formatting tasks. If one of the programs is missing, &kfloppy; tries to work nevertheless. However the corresponding option will not be available. fdformat This program is needed for low-level formatting, on &Linux; and on &BSD;. If it is missing, Full format will be disabled. dd This program is needed for zeroing-out, on &Linux; and on &BSD;. If it is missing, Zero out and quick format will be disabled. mkdosfs This program is needed for DOS formatting, on &Linux;. newfs_msdos This program is needed for DOS formatting, on &BSD;. newfs This program is needed for UFS formatting, on &BSD;. mke2fs This program is needed for ext2 formatting, on &Linux; and on &BSD;. mkfs.minix This program is needed for &Minix; formatting, on &Linux;. "User Given Devices" is the work title of a still experimental feature of &kfloppy;. It allows the user to give a device name and to use it nearly as if it was a floppy drive. This feature is mainly intended as a work-around for users having USB floppy drives of any kind (including ZIP disk drives) or any other non-legacy floppy drives. Unfortunately at the time of writing this documentation, the feature is not very user friendly, as it does not offer any help to the user on how a device is called and &kfloppy; does not even remember the device name from call to call. (This is partially a security, as the device of the floppy drive might change between reboots.) As this feature was developed under &Linux;, the &BSD; version of &kfloppy; offers less choices than &kfloppy; under &Linux;. Using "User Given Devices" is quite simple, you just need to enter a device name, for example /dev/sdz4 in the Floppy drive: combobox instead of selecting Primary or Secondary. You need to enter the /dev/ part of the device for two reasons: It is how &kfloppy; recognizes the "User Given Devices" mode. It is a security, to avoid that the user writes anything in the combobox that is by change a device name. Unfortunately, using any device instead of a floppy device has a few consequences. The major one is that Full Format cannot be selected anymore. Doing so will result in a error message box when trying to start the format. However you can use Zero out and quick format instead. It will not format the device, just zeroing it out, but in practice it is nearly the same; especially all data on the device will be erased. Be careful when entering the device name. &kfloppy; will pass the device name as is to the external programs. Especially it does not check (and the external programs do not check either) if the device is a floppy drive device. If you give your any of your main disk partitions as device, it will be accepted. (If the partition is mounted or if you cannot write on this device, you will probably get an error message nevertheless, avoiding the worst.) Even if you can specify a floppy device like /dev/fd0u2880, &kfloppy; will refuse to make a Full Format on it. On &Linux;, you can select any file system that you want. On &BSD;, only UFS is currently supported (and not tested at time of writing this documentation). When you are ready to format, click on the Format button as usual. You will get a message box asking you to verify the device name. This is the last chance to check the device name before formating. After it, it is too late.