Running TQt/Embedded applications

A TQt/Embedded application requires a master application to be running or to be a master application itself. The master application is primarily responsible for managing top-level window regions, and pointer and keyboard input.

Any TQt/Embedded application can be a master application by constructing the TQApplication object with the TQApplication::GuiServer type, or by being run with the -qws command line option.

This document assumes you have the Linux framebuffer configured correctly and no master process is running. If you do not have a working Linux framebuffer you can use the TQt/Embedded virtual framebuffer, or you can run TQt/Embedded as a VNC server.

Change to a Linux console and select an example to run, e.g. examples/widgets. Make sure $QTDIR is set to the directory where you installed TQt/Embedded and add the $QTDIR/lib directory to $LD_LIBRARY_PATH, e.g.:

export QTDIR=$HOME/qt-VERSION
export LD_LIBRARY_PATH=$QTDIR/lib:$LD_LIBRARY_PATH

Run the application with the -qws option:

cd $QTDIR/examples/widgets
./widgets -qws

You should see the widgets example appear. If your mouse doesn't work correctly you must specify the type of mouse to use. You can exit the master application at any time using Ctrl+Alt+Backspace.

If you wish to run additional applications you should run them as clients i.e. without the -qws option.

Displays

TQt/Embedded allows multiple displays to be used simultaneously by running multiple TQt/Embedded master processes. This is achieved using the -display command line parameter or the $TQWS_DISPLAY environment variable.

The -display parameter's syntax is:

    [gfx driver][:driver specific options][:display number]

For example, if you want to use the mach64 driver on fb1 as display 2:

    $ ./launcher -display Mach64:/dev/fb1:2

To try this functionality you can do the following:

Change to VC 1 (virtual console one) and run the launcher:
```
    $ cd examples/launcher
    $ ./launcher
```
Switch to VC 2 and run another one:
```
    $ cd examples/launcher
    $ ./launcher -display :1
```
Another launcher will be started. Start an application in this launcher.
Press Ctrl+Alt+F1 - back to display 0. You can also start additional applications on a particular display by specifying the display id. Change to VC 3:
```
    $ cd examples/widgets
    $ ./widgets -display :1
```
will display the widgets example on dislpay :1 (VC 2).

Only the master process needs to specify the driver/device part explicitly. The clients get the information they need from the master when they connect. So once you have a master server running using a particular driver, you can just use "client -display :n" to use display n.

Mouse Input

TQt/Embedded attempts to autodetect a mouse by default. The supported protocols are MouseMan, Microsoft, IntelliMouse and some other devices specific to certain hardware (e.g. Vr touch panel). To specify the mouse to use set the $TQWS_MOUSE_PROTO environment variable, e.g.:

export TQWS_MOUSE_PROTO=IntelliMouse

The mouse autodetection opens the serial devices and psaux which may cause conflicts with other programs using those devices. If this is the case then specify the mouse driver protocol and device explicitly.