Replaced Autotools build files with CMake rules

Signed-off-by: Mavridis Philippe <mavridisf@gmail.com>
pull/1/head
Mavridis Philippe 2 years ago
parent e822245ef1
commit 9ef5a045dd
No known key found for this signature in database
GPG Key ID: F8D2D7E2F989A494

@ -0,0 +1,70 @@
############################################
# #
# Improvements and feedbacks are welcome #
# #
# This file is released under GPL >= 3 #
# #
############################################
cmake_minimum_required( VERSION 2.8.12 )
#### general package setup
project( twin-style-dekorator )
set( VERSION R14.1.0 )
#### include essential cmake modules
include( FindPkgConfig )
include( CheckFunctionExists )
include( CheckSymbolExists )
include( CheckIncludeFile )
include( CheckLibraryExists )
include( CheckCSourceCompiles )
include( CheckCXXSourceCompiles )
#### include our cmake modules
set( CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}/cmake/modules" )
include( TDEMacros )
##### setup install paths
include( TDESetupPaths )
tde_setup_paths( )
##### optional stuff
option( WITH_ALL_OPTIONS "Enable all optional support" OFF )
option( WITH_GCC_VISIBILITY "Enable fvisibility and fvisibility-inlines-hidden" ${WITH_ALL_OPTIONS} )
##### configure checks
include( ConfigureChecks.cmake )
###### global compiler settings
add_definitions( -DHAVE_CONFIG_H )
set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${TQT_CXX_FLAGS}" )
set( CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -Wl,--no-undefined" )
set( CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} -Wl,--no-undefined" )
##### directories
add_subdirectory( client )
##### write configure files
configure_file( config.h.cmake config.h @ONLY )

@ -0,0 +1,25 @@
###########################################
# #
# Improvements and feedback are welcome #
# #
# This file is released under GPL >= 3 #
# #
###########################################
# required stuff
find_package( TQt )
find_package( TDE )
tde_setup_architecture_flags( )
include(TestBigEndian)
test_big_endian(WORDS_BIGENDIAN)
tde_setup_largefiles( )
##### check for gcc visibility support
if( WITH_GCC_VISIBILITY )
tde_setup_gcc_visibility( )
endif( WITH_GCC_VISIBILITY )

File diff suppressed because it is too large Load Diff

863
aclocal.m4 vendored

@ -1,863 +0,0 @@
# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION so it can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.9.6])])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory. The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run. This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
# fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
# fails if $ac_aux_dir is absolute,
# fails when called from a subdirectory in a VPATH build with
# a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir. In an in-source build this is usually
# harmless because $srcdir is `.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
# MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH. The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.
AC_DEFUN([AM_AUX_DIR_EXPAND],
[dnl Rely on autoconf to set up CDPATH properly.
AC_PREREQ([2.50])dnl
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
])
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 7
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ(2.52)dnl
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])
AC_SUBST([$1_FALSE])
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 8
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery. Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "GCJ", or "OBJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
[$1], CXX, [depcc="$CXX" am_compiler_list=],
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
AC_CACHE_CHECK([dependency style of $depcc],
[am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named `D' -- because `-MD' means `put the output
# in D'.
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_$1_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
# Solaris 8's {/usr,}/bin/sh.
touch sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
case $depmode in
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
none) break ;;
esac
# We check with `-c' and `-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle `-M -o', and we need to detect this.
if depmode=$depmode \
source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_$1_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])
# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])
# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE(dependency-tracking,
[ --disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors])
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
#serial 3
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[for mf in $CONFIG_FILES; do
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# We used to match only the files named `Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
# So let's grep whole file.
if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
dirpart=`AS_DIRNAME("$mf")`
else
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
# from the Makefile without running `make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
test -z "am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n 's/^U = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`AS_DIRNAME(["$file"])`
AS_MKDIR_P([$dirpart/$fdir])
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
# is enabled. FIXME. This creates each `.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 8
# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 12
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out. PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition. After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_PREREQ([2.58])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
# test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" &&
test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
# test whether we have cygpath
if test -z "$CYGPATH_W"; then
if (cygpath --version) >/dev/null 2>/dev/null; then
CYGPATH_W='cygpath -w'
else
CYGPATH_W=echo
fi
fi
AC_SUBST([CYGPATH_W])
# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
AM_PROG_INSTALL_SH
AM_PROG_INSTALL_STRIP
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
[_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
[_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
[_AM_DEPENDENCIES(CC)],
[define([AC_PROG_CC],
defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
[_AM_DEPENDENCIES(CXX)],
[define([AC_PROG_CXX],
defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
])
])
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
# loop where config.status creates the headers, so we can generate
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$1 | $1:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
install_sh=${install_sh-"$am_aux_dir/install-sh"}
AC_SUBST(install_sh)])
# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 2
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
[rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
am__leading_dot=.
else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
# Check to see how 'make' treats includes. -*- Autoconf -*-
# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 3
# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
@echo done
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# We grep out `Entering directory' and `Leaving directory'
# messages which can occur if `w' ends up in MAKEFLAGS.
# In particular we don't look at `^make:' because GNU make might
# be invoked under some other name (usually "gmake"), in which
# case it prints its new name instead of `make'.
if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
am__include=include
am__quote=
_am_result=GNU
fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
am__include=.include
am__quote="\""
_am_result=BSD
fi
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
AC_MSG_RESULT([$_am_result])
rm -f confinc confmf
])
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 4
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])
# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it supports --run.
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
else
am_missing_run=
AC_MSG_WARN([`missing' script is too old or missing])
fi
])
# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_MKDIR_P
# ---------------
# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
#
# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
# created by `make install' are always world readable, even if the
# installer happens to have an overly restrictive umask (e.g. 077).
# This was a mistake. There are at least two reasons why we must not
# use `-m 0755':
# - it causes special bits like SGID to be ignored,
# - it may be too restrictive (some setups expect 775 directories).
#
# Do not use -m 0755 and let people choose whatever they expect by
# setting umask.
#
# We cannot accept any implementation of `mkdir' that recognizes `-p'.
# Some implementations (such as Solaris 8's) are not thread-safe: if a
# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
# concurrently, both version can detect that a/ is missing, but only
# one can create it and the other will error out. Consequently we
# restrict ourselves to GNU make (using the --version option ensures
# this.)
AC_DEFUN([AM_PROG_MKDIR_P],
[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
# We used to keeping the `.' as first argument, in order to
# allow $(mkdir_p) to be used without argument. As in
# $(mkdir_p) $(somedir)
# where $(somedir) is conditionally defined. However this is wrong
# for two reasons:
# 1. if the package is installed by a user who cannot write `.'
# make install will fail,
# 2. the above comment should most certainly read
# $(mkdir_p) $(DESTDIR)$(somedir)
# so it does not work when $(somedir) is undefined and
# $(DESTDIR) is not.
# To support the latter case, we have to write
# test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
# so the `.' trick is pointless.
mkdir_p='mkdir -p --'
else
# On NextStep and OpenStep, the `mkdir' command does not
# recognize any option. It will interpret all options as
# directories to create, and then abort because `.' already
# exists.
for d in ./-p ./--version;
do
test -d $d && rmdir $d
done
# $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
if test -f "$ac_aux_dir/mkinstalldirs"; then
mkdir_p='$(mkinstalldirs)'
else
mkdir_p='$(install_sh) -d'
fi
fi
AC_SUBST([mkdir_p])])
# Helper functions for option handling. -*- Autoconf -*-
# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 3
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
# _AM_SET_OPTION(NAME)
# ------------------------------
# Set option NAME. Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
# _AM_SET_OPTIONS(OPTIONS)
# ----------------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
# Check to make sure that the build environment is sane. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 4
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftest.file`
fi
rm -f conftest.file
if test "$[*]" != "X $srcdir/configure conftest.file" \
&& test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
test "$[2]" = conftest.file
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT(yes)])
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor `install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in `make install-strip', and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'. However `strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the `STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 2
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of `v7', `ustar', or `pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
# tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility.
AM_MISSING_PROG([AMTAR], [tar])
m4_if([$1], [v7],
[am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
[m4_case([$1], [ustar],, [pax],,
[m4_fatal([Unknown tar format])])
AC_MSG_CHECKING([how to create a $1 tar archive])
# Loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
_am_tools=${am_cv_prog_tar_$1-$_am_tools}
# Do not fold the above two line into one, because Tru64 sh and
# Solaris sh will not grok spaces in the rhs of `-'.
for _am_tool in $_am_tools
do
case $_am_tool in
gnutar)
for _am_tar in tar gnutar gtar;
do
AM_RUN_LOG([$_am_tar --version]) && break
done
am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
am__untar="$_am_tar -xf -"
;;
plaintar)
# Must skip GNU tar: if it does not support --format= it doesn't create
# ustar tarball either.
(tar --version) >/dev/null 2>&1 && continue
am__tar='tar chf - "$$tardir"'
am__tar_='tar chf - "$tardir"'
am__untar='tar xf -'
;;
pax)
am__tar='pax -L -x $1 -w "$$tardir"'
am__tar_='pax -L -x $1 -w "$tardir"'
am__untar='pax -r'
;;
cpio)
am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
am__untar='cpio -i -H $1 -d'
;;
none)
am__tar=false
am__tar_=false
am__untar=false
;;
esac
# If the value was cached, stop now. We just wanted to have am__tar
# and am__untar set.
test -n "${am_cv_prog_tar_$1}" && break
# tar/untar a dummy directory, and stop if the command works
rm -rf conftest.dir
mkdir conftest.dir
echo GrepMe > conftest.dir/file
AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
rm -rf conftest.dir
if test -s conftest.tar; then
AM_RUN_LOG([$am__untar <conftest.tar])
grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
fi
done
rm -rf conftest.dir
AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
AC_MSG_RESULT([$am_cv_prog_tar_$1])])
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
m4_include([acinclude.m4])

@ -1,100 +0,0 @@
## generate API documentation with doxygen
apidox-am-yes:
@if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$ADMIN" ; then \
export DOXDATA=$(kde_libs_htmldir)/en/common ; \
fi ; \
test -d $(top_builddir)/apidocs || \
( cd $(top_builddir) && sh $(top_srcdir)/admin/doxygen.sh \
--no-modulename --installdir=$(kde_libs_htmldir)/en \
--no-recurse $(top_srcdir) . ) ; \
cd $(top_builddir) && sh $(top_srcdir)/admin/doxygen.sh \
--recurse --no-modulename --installdir=$(kde_libs_htmldir)/en \
$(top_srcdir) $(subdir)
apidox-am-toplevel-yes:
@if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$ADMIN" ; then \
export DOXDATA=$(kde_libs_htmldir)/en/common ; \
fi ; \
cd $(top_builddir) && sh $(top_srcdir)/admin/doxygen.sh \
--no-modulename --installdir=$(kde_libs_htmldir)/en \
$(top_srcdir)
## Don't generate API documentation without doxygen
apidox-am-no:
apidox-am-toplevel-no:
apidox:
@if test "$(subdir)" != "."; then \
$(MAKE) apidox-am-@KDE_HAS_DOXYGEN@ ;\
else \
$(MAKE) apidox-am-toplevel-@KDE_HAS_DOXYGEN@ ;\
fi
install-data-local: install-apidox
## install API documentation
install-apidox:
@if test "$(subdir)" != "."; then \
$(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html ; \
if test -f $(top_builddir)/apidocs/$(subdir)/$(subdir).tag; then \
echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
$(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
fi; \
if test -d $(top_builddir)/apidocs/$(subdir)/html; then \
list=`ls $(top_builddir)/apidocs/$(subdir)/html`; \
echo "installing $(top_builddir)/apidocs/$(subdir)/html" ;\
for file in $$list; do \
$(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \
done; \
fi; \
else\
if test -d $(top_builddir)/apidocs; then \
$(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs ;\
list=`cd $(top_builddir)/apidocs && ls -1`; \
echo "installing $(top_builddir)/apidocs/$$file" ;\
echo "target directory $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs" ; \
for file in $$list; do \
if test -f $(top_builddir)/apidocs/$$file; then \
$(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
fi; \
done ; fi; \
fi
uninstall-local: uninstall-apidox
## uninstall API documentation
uninstall-apidox:
@if test "$(subdir)" != "."; then \
if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); then \
rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
fi\
else\
if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; then \
rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
fi\
fi
install-apidox-recurse: install-apidox
@set fnord $(MAKEFLAGS); amf=$$2; if test -n '$(SUBDIRS)'; then \
list='$(SUBDIRS)'; \
for subdir in $$list; do \
if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am > /dev/null ; then \
echo "Installing apidox from $$subdir"; \
if test "$$subdir" != "."; then \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=no install-apidox-recurse) || exit 1; \
fi ; fi ;\
done; \
fi
.PHONY: apidox-am-yes apidox-am-no install-data-local install-apidox install-apidox uninstall-local uninstall-apidox uninstall-apidox apidox apidox-am-toplevel-no apidox-am-toplevel-yes
# Local Variables:
# mode: makefile
# End:

@ -1,192 +0,0 @@
OUTPUT_LANGUAGE = English
USE_WINDOWS_ENCODING = NO
BRIEF_MEMBER_DESC = NO
REPEAT_BRIEF = YES
ABBREVIATE_BRIEF =
ALWAYS_DETAILED_SEC = YES
INLINE_INHERITED_MEMB = NO
FULL_PATH_NAMES = NO
STRIP_FROM_PATH =
SHORT_NAMES = NO
JAVADOC_AUTOBRIEF = YES
MULTILINE_CPP_IS_BRIEF = NO
INHERIT_DOCS = YES
DISTRIBUTE_GROUP_DOC = NO
TAB_SIZE = 4
OPTIMIZE_OUTPUT_FOR_C = NO
OPTIMIZE_OUTPUT_JAVA = NO
SUBGROUPING = YES
EXTRACT_ALL = NO
EXTRACT_PRIVATE = NO
EXTRACT_STATIC = YES
EXTRACT_LOCAL_CLASSES = NO
HIDE_UNDOC_MEMBERS = NO
HIDE_UNDOC_CLASSES = YES
HIDE_FRIEND_COMPOUNDS = NO
HIDE_IN_BODY_DOCS = NO
INTERNAL_DOCS = NO
CASE_SENSE_NAMES = YES
HIDE_SCOPE_NAMES = NO
SHOW_INCLUDE_FILES = YES
INLINE_INFO = YES
SORT_BRIEF_DOCS = NO
SORT_BY_SCOPE_NAME = NO
GENERATE_TESTLIST = NO
GENERATE_BUGLIST = YES
GENERATE_DEPRECATEDLIST= YES
ENABLED_SECTIONS =
MAX_INITIALIZER_LINES = 30
SHOW_USED_FILES = YES
QUIET = YES
WARNINGS = NO
WARN_IF_UNDOCUMENTED = NO
WARN_IF_DOC_ERROR = YES
WARN_FORMAT =
WARN_LOGFILE =
INPUT =
FILE_PATTERNS = *.h \
*.cpp \
*.cc \
*.hpp \
*.dox \
*.c++ \
*.cxx \
*.h++ \
*.hh
RECURSIVE = YES
EXCLUDE =
EXCLUDE_SYMLINKS = NO
EXCLUDE_PATTERNS = *.moc.* \
moc* \
*.all_cpp.* \
*unload.* \
*/test/* \
*/tests/* \
*_p.h
EXAMPLE_PATH =
EXAMPLE_PATTERNS =
EXAMPLE_RECURSIVE = NO
IMAGE_PATH =
INPUT_FILTER =
FILTER_SOURCE_FILES = NO
SOURCE_BROWSER = YES
INLINE_SOURCES = NO
STRIP_CODE_COMMENTS = YES
REFERENCED_BY_RELATION = YES
REFERENCES_RELATION = YES
VERBATIM_HEADERS = YES
ALPHABETICAL_INDEX = YES
COLS_IN_ALPHA_INDEX = 3
HTML_OUTPUT =
HTML_FILE_EXTENSION = .html
HTML_HEADER = ../apidocs/common/header.html
HTML_FOOTER = ../apidocs/common/footer.html
HTML_STYLESHEET = ../apidocs/common/doxygen.css
HTML_ALIGN_MEMBERS = YES
GENERATE_HTMLHELP = NO
CHM_FILE =
HHC_LOCATION =
GENERATE_CHI = NO
BINARY_TOC = NO
TOC_EXPAND = NO
DISABLE_INDEX = YES
ENUM_VALUES_PER_LINE = 4
GENERATE_TREEVIEW = NO
TREEVIEW_WIDTH = 250
GENERATE_LATEX = NO
LATEX_OUTPUT =
LATEX_CMD_NAME = latex
MAKEINDEX_CMD_NAME = makeindex
COMPACT_LATEX = NO
PAPER_TYPE = a4wide
EXTRA_PACKAGES =
LATEX_HEADER =
PDF_HYPERLINKS = NO
USE_PDFLATEX = NO
LATEX_BATCHMODE = NO
LATEX_HIDE_INDICES = NO
GENERATE_RTF = NO
RTF_OUTPUT =
COMPACT_RTF = NO
RTF_HYPERLINKS = NO
RTF_STYLESHEET_FILE =
RTF_EXTENSIONS_FILE =
GENERATE_MAN = NO
MAN_OUTPUT =
MAN_EXTENSION = .kde3
MAN_LINKS = YES
GENERATE_XML = NO
XML_OUTPUT = xml
XML_SCHEMA =
XML_DTD =
XML_PROGRAMLISTING = NO
GENERATE_AUTOGEN_DEF = NO
GENERATE_PERLMOD = NO
PERLMOD_LATEX = NO
PERLMOD_PRETTY = YES
PERLMOD_MAKEVAR_PREFIX =
ENABLE_PREPROCESSING = YES
SEARCH_INCLUDES = YES
INCLUDE_PATH =
INCLUDE_FILE_PATTERNS =
PREDEFINED = QT_VERSION=320 \
__cplusplus \
Q_WS_X11
EXPAND_AS_DEFINED =
SKIP_FUNCTION_MACROS = YES
TAGFILES =
GENERATE_TAGFILE =
ALLEXTERNALS = NO
EXTERNAL_GROUPS = NO
PERL_PATH =
CLASS_DIAGRAMS = YES
HIDE_UNDOC_RELATIONS = NO
HAVE_DOT = NO
UML_LOOK = NO
TEMPLATE_RELATIONS = YES
INCLUDE_GRAPH = YES
INCLUDED_BY_GRAPH = YES
CALL_GRAPH = NO
GRAPHICAL_HIERARCHY = YES
DOT_IMAGE_FORMAT = png
DOT_PATH =
DOTFILE_DIRS =
MAX_DOT_GRAPH_WIDTH = 800
MAX_DOT_GRAPH_HEIGHT = 1024
MAX_DOT_GRAPH_DEPTH = 0
GENERATE_LEGEND = YES
DOT_CLEANUP = YES
SEARCHENGINE = NO
### KDE Settings
ALIASES = \
"intern=\par<b>Internal use only.</b>" \
"reimp=\par<b>Reimplemented from superclass.</b>" \
"obsolete=@deprecated" \
"feature=\xrefitem features \"Feature(s)\" \"Features\"" \
"maintainer=\xrefitem maintainers \"Maintainer(s)\" \"Maintainers\"" \
"unmaintained=\xrefitem unmaintained \"Unmaintained\" \"Unmaintained\"" \
"requirement=\xrefitem requirements \"Requirement(s)\" \"Requirements\"" \
"faq=\xrefitem FAQ \"F.A.Q.\" \"F.A.Q.\"" \
"authors=\xrefitem authors \"Author(s)\" \"Authors\"" \
"FIXME=\xrefitem fixme \"Fixme\" \"Fixme\""
HTML_ALIGN_MEMBERS = YES
REFERENCED_BY_RELATION = NO
REFERENCES_RELATION = NO
VERBATIM_HEADERS = NO
GENERATE_HTML = YES
SOURCE_BROWSER = YES
GENERATE_AUTOGEN_DEF = NO
DETAILS_AT_TOP = YES
SORT_MEMBER_DOCS = YES
GENERATE_TODOLIST = YES
IGNORE_PREFIX = K
GENERATE_HTML = YES
CLASS_GRAPH = YES
COLLABORATION_GRAPH = NO
MACRO_EXPANSION = YES
EXPAND_ONLY_PREDEF = YES

@ -1,37 +0,0 @@
### Makefile.common
###
### Copyright (C) 2002 by the KDE developers
### All the real work is done by the shellscript cvs.sh
SHELL=/bin/sh
cvs dist configure configure.in configure.files subdirs package-messages package-merge Makefile.am acinclude.m4 extract-messages:
@admindir=$(admindir); \
if test "x$$admindir" = x; then \
admindir=.; until test -f $$admindir/admin/cvs.sh; do \
admindir=$$admindir/..; \
if test `cd $$admindir && pwd` = / ; then break; fi; \
done; \
admindir=$$admindir/admin; \
if test -f $$admindir/cvs.sh; then :; else \
echo "Can't find the admin/ directory in any parent of the"; \
echo "current directory. Please set it with admindir=..."; \
exit 1; \
fi; \
fi; \
if test "$@" = "package-merge"; then \
MAKE="$(MAKE)" POFILES="$(POFILES)" PACKAGE="$(PACKAGE)" \
$(SHELL) $$admindir/cvs.sh package-merge ;\
else \
MAKE="$(MAKE)" $(SHELL) $$admindir/cvs.sh $@ ;\
fi
configure.in: configure.files subdirs
configure.files: subdirs
svn: cvs
.SILENT:
.PHONY: svn cvs dist package-merge package-messages

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

@ -1,157 +0,0 @@
#!/usr/bin/perl -w
use DB_File;
use Fcntl ':flock';
if (!defined($ARGV[0])) {
print "usage: requires .class dump as parameter!\n";
exit;
}
sub bailout
{
untie %bcheckdb if(defined(%bcheckdb));
if(defined(MYLOCK)) {
flock MYLOCK, LOCK_UN;
close(MYLOCK);
}
print @_;
exit 5;
}
sub ask_user
{
my ($dbkey, $dbchunk) = @_;
if (defined($ENV{"BCHECK_UPDATE"})) {
$bcheckdb{$dbkey} = $dbchunk;
return;
}
&bailout("BC problem detected") if (! -t STDIN);
print "(I)gnore / (Q)uit / (U)pdate: ";
my $key;
while(defined(read STDIN, $key, 1)) {
$key = lc($key);
print "got: >$key<\n";
return if ($key eq 'i');
&bailout("BC problem. aborted") if ($key eq 'q');
if ($key eq 'u') {
$bcheckdb{$dbkey} = $dbchunk;
return;
}
print "\n(I)gnore / (Q)uit / (U)pdate: ";
}
}
sub diff_chunk($$)
{
my ($oldl, $newl) = @_;
my @old = split /^/m, $oldl;
my @new = split /^/m, $newl;
my $haschanges = 0;
my $max = $#old > $#new ? $#old : $#new;
die "whoops. key different" if ($old[0] ne $new[0]);
if ($#old != $#new) {
warn ("Structural difference.\n");
print @old;
print "-----------------------------------------------\n";
print @new;
$haschanges = 1;
return $haschanges;
}
print $old[0];
my ($class) = ($old[0] =~ /^(?:Class |Vtable for )(\S+)/);
my $c = 1;
while ($c < $max) {
my ($o, $n) = ($old[$c], $new[$c]);
chomp $o;
chomp $n;
$c++;
next if ($o eq $n);
if(defined($class) and $n =~ /^(\d+\s+)\w+(::\S+\s*.*)$/) {
next if ($n eq "$1$class$2");
}
$haschanges = 1;
print "-$o\n+$n\n\n";
}
return $haschanges;
}
local $dblock = $ENV{"HOME"} . "/bcheck.lock";
my $dbfile = $ENV{"HOME"} . "/bcheck.db";
my $cdump = $ARGV[0];
die "file $cdump is not readable: $!" if (! -f $cdump);
# make sure the advisory lock exists
open(MYLOCK, ">$dblock");
print MYLOCK "";
flock MYLOCK, LOCK_EX;
tie %bcheckdb, 'DB_File', $dbfile;
my $chunk = "";
open (IN, "<$cdump") or die "cannot open $cdump: $!";
while (<IN>) {
chop;
s/0x[0-9a-fA-F]+/0x......../g;
s/base size=/size=/g;
s/\(\)\s*$//g;
s/base align=/align=/g;
$chunk .= $_ . "\n";
if(/^\s*$/) {
my @lines = split /^/m, $chunk;
my $key = $lines[0];
chomp $key;
if($key !~ /<anonymous struct>/ &&
$key !~ /<anonymous union>/) {
if(defined($bcheckdb{$key})) {
my $dbversion = $bcheckdb{$key};
if($dbversion ne $chunk) {
&ask_user($key, $chunk) if(&diff_chunk($dbversion, $chunk));
}
}
else {
$bcheckdb{$key} = $chunk;
print "NEW: $key\n";
}
}
$chunk = "";
next;
}
}
close(IN);
untie %bcheckdb;
flock MYLOCK, LOCK_UN;
close(MYLOCK);
exit 0;

@ -1,142 +0,0 @@
#! /bin/sh
# Wrapper for compilers which do not understand `-c -o'.
scriptversion=2005-05-14.22
# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
case $1 in
'')
echo "$0: No command. Try \`$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand `-c -o'.
Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file `INSTALL'.
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "compile $scriptversion"
exit $?
;;
esac
ofile=
cfile=
eat=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as `compile cc -o foo foo.c'.
# So we strip `-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no `-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# `.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
# Create the lock directory.
# Note: use `[/.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:

@ -1,191 +0,0 @@
#!/usr/bin/env perl
# this script patches a config.status file, to use our own perl script
# in the main loop
# we do it this way to circumvent hacking (and thereby including)
# autoconf function (which are GPL) into our LGPL acinclude.m4.in
# written by Michael Matz <matz@kde.org>
# adapted by Dirk Mueller <mueller@kde.org>
#
# This file is free software; you can redistribute it and/or
# modify it under the terms of the GNU Library General Public
# License as published by the Free Software Foundation; either
# version 2 of the License, or (at your option) any later version.
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Library General Public License for more details.
# You should have received a copy of the GNU Library General Public License
# along with this library; see the file COPYING.LIB. If not, write to
# the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
# Boston, MA 02110-1301, USA.
# we have to change two places
# 1. the splitting of the substitutions into chunks of 90 (or even 48 in
# later autoconf's
# 2. the big main loop which patches all Makefile.in's
use strict;
use File::Basename;
my $ac_aux_dir = dirname($0);
my ($flag);
my $ac_version = 0;
my $vpath_seen = 0;
$flag = 0;
while (<>) {
# usage of $flag: 0 -- we have seen nothing yet
# 1 -- we are in (1)
# 2 -- we have ended (1)
# 3 -- we are in (2)
# 4 -- we ended (2)
if ($flag == 4) {
print;
} elsif ($flag == 0) {
# 1. begins with (including): "ac_max_sed_\S+\s*=\s*[0-9]+..."
# ends with (excluding) "CONFIG_FILE=..."
# in later autoconf (2.14.1) there is no CONFIG_FILES= line,
# but instead the (2) directly follow (1)
if (/^\s*ac_max_sed_([a-z]+).*=\s*([0-9]+)/ ) {
$flag = 1;
if ($1 eq 'lines') {
# lets hope its different with 2141,
# wasn't able to verify that
if ($2 eq '48') {
$ac_version = 250;
}
else {
$ac_version = 2141;
}
} elsif ($1 eq 'cmds') {
$ac_version = 213;
}
# hmm, we don't know the autoconf version, but we try anyway
} else {
print;
}
} elsif ($flag == 1) {
if (/^\s*CONFIG_FILES=/ && ($ac_version != 250)) {
print;
$flag = 2;
} elsif (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
$flag = 3;
}
} elsif ($flag == 2) {
# 2. begins with: "for ac_file in.*CONFIG_FILES" (the next 'for' after (1))
# end with: "rm -f conftest.s\*"
# on autoconf 250, it ends with '# CONFIG_HEADER section'
#
# gg: if a post-processing commands section is found first,
# stop there and insert a new loop to honor the case/esac.
# (pattern: /^\s+#\sRun the commands associated with the file./)
if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
$flag = 3;
} else {
print;
}
} elsif ($flag == 3) {
if (/^\s*rm\s+-f\s+conftest/ ) {