Reset submodule main/applications/kvkbd/cmake to latest HEAD

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

.gitmodules

@@ -1,6 +1,3 @@
-[submodule "admin"]
-	path = admin
-	url = http://system@scm.trinitydesktop.org/scm/git/tde-common-admin
 [submodule "cmake"]
 	path = cmake
-	url = http://system@scm.trinitydesktop.org/scm/git/tde-common-cmake
+	url = https://system@scm.trinitydesktop.org/scm/git/tde-common-cmake

CMakeL10n.txt

@@ -0,0 +1,23 @@
+#################################################
+#
+#  (C) 2018 Slávek Banko
+#  slavek.banko (AT) axis.cz
+#
+#  Improvements and feedback are welcome
+#
+#  This file is released under GPL >= 2
+#
+#################################################
+
+cmake_minimum_required( VERSION 2.8 )
+
+
+##### include our cmake modules #################
+
+set( CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}/cmake/modules" )
+include( TDEL10n )
+
+
+##### create translation templates ##############
+
+tde_l10n_auto_add_subdirectories( )

CMakeLists.txt

@@ -0,0 +1,78 @@
+############################################
+#                                          #
+#  Improvements and feedbacks are welcome  #
+#                                          #
+#  This file is released under GPL >= 3    #
+#                                          #
+############################################
+
+
+cmake_minimum_required( VERSION 2.8 )
+
+
+#### general package setup
+
+project( kvkbd )
+set( VERSION R14.0.9 )
+
+
+#### include essential cmake modules
+
+include( FindPkgConfig          )
+include( CheckFunctionExists    )
+include( CheckSymbolExists      )
+include( CheckIncludeFile       )
+include( CheckLibraryExists     )
+include( CheckCSourceCompiles   )
+include( CheckCXXSourceCompiles )
+
+
+#### include our cmake modules
+
+set( CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}/cmake/modules" )
+include( TDEMacros )
+
+
+##### setup install paths
+
+include( TDESetupPaths )
+tde_setup_paths( )
+
+
+##### optional stuff
+
+option( WITH_ALL_OPTIONS    "Enable all optional support"                       OFF )
+option( WITH_GCC_VISIBILITY "Enable fvisibility and fvisibility-inlines-hidden" ${WITH_ALL_OPTIONS} )
+
+
+##### user requested modules
+
+option( BUILD_ALL          "Build all"           OFF )
+option( BUILD_DOC          "Build documentation" ${BUILD_ALL} )
+option( BUILD_TRANSLATIONS "Build translations"  ${BUILD_ALL} )
+
+
+##### configure checks
+
+include( ConfigureChecks.cmake )
+
+
+###### global compiler settings
+
+add_definitions( -DHAVE_CONFIG_H )
+
+set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${TQT_CXX_FLAGS}" )
+set( CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -Wl,--no-undefined" )
+set( CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} -Wl,--no-undefined" )
+
+
+##### directories
+
+add_subdirectory( src )
+tde_conditional_add_subdirectory( BUILD_DOC doc )
+tde_conditional_add_subdirectory( BUILD_TRANSLATIONS translations )
+
+
+##### write configure files
+
+configure_file( config.h.cmake config.h @ONLY )

ConfigureChecks.cmake

@@ -0,0 +1,34 @@
+###########################################
+#                                         #
+#  Improvements and feedback are welcome  #
+#                                         #
+#  This file is released under GPL >= 3   #
+#                                         #
+###########################################
+
+
+# required stuff
+find_package( TQt )
+find_package( TDE )
+
+tde_setup_architecture_flags( )
+
+include(TestBigEndian)
+test_big_endian(WORDS_BIGENDIAN)
+
+tde_setup_largefiles( )
+
+
+##### check for gcc visibility support
+
+if( WITH_GCC_VISIBILITY )
+  tde_setup_gcc_visibility( )
+endif( )
+
+
+##### check for X11 - XTest
+
+find_package( X11 )
+if( NOT X11_XTest_FOUND )
+    tde_message_fatal( "The XTest (X11) library is required but was not found on your system." )
+endif()

INSTALL

@@ -1,167 +1,16 @@
 Basic Installation
 ==================
 
-   These are generic installation instructions.
+kvkbd relies on cmake to build.
-
+
-   The `configure' shell script attempts to guess correct values for
+Here are suggested default options:
-various system-dependent variables used during compilation.  It uses
+
-those values to create a `Makefile' in each directory of the package.
+ -DCMAKE_INSTALL_PREFIX="/opt/trinity" \
-It may also create one or more `.h' files containing system-dependent
+ -DCONFIG_INSTALL_DIR="/etc/trinity" \
-definitions.  Finally, it creates a shell script `config.status' that
+ -DSYSCONF_INSTALL_DIR="/etc/trinity" \
-you can run in the future to recreate the current configuration, a file
+ -DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
-`config.cache' that saves the results of its tests to speed up
+ -DCMAKE_BUILD_TYPE=RelWithDebInfo \
-reconfiguring, and a file `config.log' containing compiler output
+ -DCMAKE_VERBOSE_MAKEFILE="ON" \
-(useful mainly for debugging `configure').
+ -DCMAKE_SKIP_RPATH="OFF" \
-
+ -DBUILD_ALL="ON" \
-   If you need to do unusual things to compile the package, please try
+ -DWITH_ALL_OPTIONS="ON"
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
-   The file `configure.in' is used to create `configure' by a program
-called `autoconf'.  You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes a while.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Type `make install' to install the programs and any data files and
-     documentation.
-
-  4. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  You can give `configure'
-initial values for variables by setting them in the environment.  Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
-     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
-     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory.  After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on.  Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
-     CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
-   If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Operation Controls
-==================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
-     Use and save the results of the tests in FILE instead of
-     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
-     debugging `configure'.
-
-`--help'
-     Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`--version'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
-

Makefile.am

@@ -1,23 +0,0 @@
-SUBDIRS = $(TOPSUBDIRS)
-
-$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
-	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
-
-$(top_srcdir)/subdirs:
-	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
-
-$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
-	@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
-
-MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files 
-
-package-messages:
-	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common package-messages
-	$(MAKE) -C po merge
-
-EXTRA_DIST = admin COPYING configure.in.in
-
-dist-hook:
-	cd $(top_distdir) && perl admin/am_edit -padmin
-	cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
-METASOURCES = AUTO

Makefile.cvs

@@ -1,10 +0,0 @@
-all: 
-	@echo "This Makefile is only for the CVS repository"
-	@echo "This will be deleted before making the distribution"
-	@echo ""
-	$(MAKE) -f admin/Makefile.common cvs
-
-dist:
-	$(MAKE) -f admin/Makefile.common dist
-
-.SILENT:

README

@@ -0,0 +1,31 @@
+
+ kvkbd - A virtual keyboard for TDE.
+ 
+
+Kvkbd is a nice virtual keyboard.
+It contains a systray widget as well as a dockwidget.
+The keyboard is resizable, provided with a numeric/cursor pad.
+
+
+Features include:
+=================
+
+ * systray
+ * dockwidget
+ * numeric pad
+ * dynamic detection of languages
+ * Auto font resize
+ * button repeat
+ * CSS Color themes
+
+
+ CONTRIBUTING
+==============
+
+If you wish to contribute to kvkbd (TDE), you might do so:
+
+- TDE Gitea Workspace (TGW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/gitea
+
+- TDE Weblate Translation Workspace (TWTW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/weblate

aclocal.m4

@@ -1,863 +0,0 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005  Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.9.6])])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 7
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 3
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`AS_DIRNAME("$mf")`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`AS_DIRNAME(["$file"])`
-    AS_MKDIR_P([$dirpart/$fdir])
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
-AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 12
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-	      		     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-])
-])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $1 | $1:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-#
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake.  There are at least two reasons why we must not
-# use `-m 0755':
-#   - it causes special bits like SGID to be ignored,
-#   - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out.  Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
-AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # We used to keeping the `.' as first argument, in order to
-  # allow $(mkdir_p) to be used without argument.  As in
-  #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.  However this is wrong
-  # for two reasons:
-  #  1. if the package is installed by a user who cannot write `.'
-  #     make install will fail,
-  #  2. the above comment should most certainly read
-  #     $(mkdir_p) $(DESTDIR)$(somedir)
-  #     so it does not work when $(somedir) is undefined and
-  #     $(DESTDIR) is not.
-  #  To support the latter case, we have to write
-  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
-  #  so the `.' trick is pointless.
-  mkdir_p='mkdir -p --'
-else
-  # On NextStep and OpenStep, the `mkdir' command does not
-  # recognize any option.  It will interpret all options as
-  # directories to create, and then abort because `.' already
-  # exists.
-  for d in ./-p ./--version;
-  do
-    test -d $d && rmdir $d
-  done
-  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
-  if test -f "$ac_aux_dir/mkinstalldirs"; then
-    mkdir_p='$(mkinstalldirs)'
-  else
-    mkdir_p='$(install_sh) -d'
-  fi
-fi
-AC_SUBST([mkdir_p])])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
-     [m4_case([$1], [ustar],, [pax],,
-              [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG([$_am_tar --version]) && break
-    done
-    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
-
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
-
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-  rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG([$am__untar <conftest.tar])
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([acinclude.m4])

admin

@@ -1 +0,0 @@
-Subproject commit 04db460623e1f235e7239f08fdcc2d0ef72636af

autogen.sh

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-make -f Makefile.cvs

cmake

@@ -1 +1 @@
-Subproject commit 1994b808819fd74446cb8f1a0491b3e10244f463
+Subproject commit 136cfe6ca9af12b6770b33a6ba54a821bbaca061

config.h.cmake

@@ -0,0 +1,8 @@
+#define VERSION "@VERSION@"
+
+// Defined if you have fvisibility and fvisibility-inlines-hidden support.
+#cmakedefine __KDE_HAVE_GCC_VISIBILITY 1
+
+/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
+   significant byte first (like Motorola and SPARC, unlike Intel). */
+#cmakedefine WORDS_BIGENDIAN @WORDS_BIGENDIAN@

config.h.in

@@ -1,244 +0,0 @@
-/* config.h.in.  Generated from configure.in by autoheader.  */
-
-/* Define to 1 if you have the <Carbon/Carbon.h> header file. */
-#undef HAVE_CARBON_CARBON_H
-
-/* Define if you have the CoreAudio API */
-#undef HAVE_COREAUDIO
-
-/* Define to 1 if you have the <crt_externs.h> header file. */
-#undef HAVE_CRT_EXTERNS_H
-
-/* Defines if your system has the crypt function */
-#undef HAVE_CRYPT
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define if you have libjpeg */
-#undef HAVE_LIBJPEG
-
-/* Define if you have libpng */
-#undef HAVE_LIBPNG
-
-/* Define if you have a working libpthread (will enable threaded code) */
-#undef HAVE_LIBPTHREAD
-
-/* Define if you have libz */
-#undef HAVE_LIBZ
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define if your system needs _NSGetEnviron to set up the environment */
-#undef HAVE_NSGETENVIRON
-
-/* Define if you have res_init */
-#undef HAVE_RES_INIT
-
-/* Define if you have the res_init prototype */
-#undef HAVE_RES_INIT_PROTO
-
-/* Define if you have a STL implementation by SGI */
-#undef HAVE_SGI_STL
-
-/* Define to 1 if you have the `snprintf' function. */
-#undef HAVE_SNPRINTF
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define if you have strlcat */
-#undef HAVE_STRLCAT
-
-/* Define if you have the strlcat prototype */
-#undef HAVE_STRLCAT_PROTO
-
-/* Define if you have strlcpy */
-#undef HAVE_STRLCPY
-
-/* Define if you have the strlcpy prototype */
-#undef HAVE_STRLCPY_PROTO
-
-/* Define to 1 if you have the <sys/bitypes.h> header file. */
-#undef HAVE_SYS_BITYPES_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the `vsnprintf' function. */
-#undef HAVE_VSNPRINTF
-
-/* Suffix for lib directories */
-#undef KDELIBSUFF
-
-/* Define a safe value for MAXPATHLEN */
-#undef KDEMAXPATHLEN
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* The size of `char *', as computed by sizeof. */
-#undef SIZEOF_CHAR_P
-
-/* The size of `int', as computed by sizeof. */
-#undef SIZEOF_INT
-
-/* The size of `long', as computed by sizeof. */
-#undef SIZEOF_LONG
-
-/* The size of `short', as computed by sizeof. */
-#undef SIZEOF_SHORT
-
-/* The size of `size_t', as computed by sizeof. */
-#undef SIZEOF_SIZE_T
-
-/* The size of `unsigned long', as computed by sizeof. */
-#undef SIZEOF_UNSIGNED_LONG
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION
-
-/* Defined if compiling without arts */
-#undef WITHOUT_ARTS
-
-/* Define to 1 if your processor stores words with the most significant byte
-   first (like Motorola and SPARC, unlike Intel and VAX). */
-#undef WORDS_BIGENDIAN
-
-/*
- * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system
- * headers and I'm too lazy to write a configure test as long as only
- * unixware is related
- */
-#ifdef _UNIXWARE
-#define HAVE_BOOLEAN
-#endif
-
-
-
-/*
- * AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
- * that defines bzero.
- */
-
-#if defined(_AIX)
-#include <strings.h>
-#endif
-
-
-
-#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H)
-# include <sys/time.h>
-# include <crt_externs.h>
-# define environ (*_NSGetEnviron())
-#endif
-
-
-
-#if !defined(HAVE_RES_INIT_PROTO)
-#ifdef __cplusplus
-extern "C" {
-#endif
-int res_init(void);
-#ifdef __cplusplus
-}
-#endif
-#endif
-
-
-
-#if !defined(HAVE_STRLCAT_PROTO)
-#ifdef __cplusplus
-extern "C" {
-#endif
-unsigned long strlcat(char*, const char*, unsigned long);
-#ifdef __cplusplus
-}
-#endif
-#endif
-
-
-
-#if !defined(HAVE_STRLCPY_PROTO)
-#ifdef __cplusplus
-extern "C" {
-#endif
-unsigned long strlcpy(char*, const char*, unsigned long);
-#ifdef __cplusplus
-}
-#endif
-#endif
-
-
-
-/*
- * On HP-UX, the declaration of vsnprintf() is needed every time !
- */
-
-#if !defined(HAVE_VSNPRINTF) || defined(hpux)
-#if __STDC__
-#include <stdarg.h>
-#include <stdlib.h>
-#else
-#include <varargs.h>
-#endif
-#ifdef __cplusplus
-extern "C"
-#endif
-int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
-#ifdef __cplusplus
-extern "C"
-#endif
-int snprintf(char *str, size_t n, char const *fmt, ...);
-#endif
-
-
-
-#if defined(__SVR4) && !defined(__svr4__)
-#define __svr4__ 1
-#endif
-
-
-/* type to use in place of socklen_t if not defined */
-#undef kde_socklen_t
-
-/* type to use in place of socklen_t if not defined (deprecated, use
-   kde_socklen_t) */
-#undef ksize_t

configure.files

@@ -1,2 +0,0 @@
-./admin/configure.in.min
-configure.in.in

configure.in

@@ -1,123 +0,0 @@
-dnl =======================================================
-dnl FILE: ./admin/configure.in.min
-dnl =======================================================
-
-dnl    This file is part of the KDE libraries/packages
-dnl    Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
- 
-dnl    This file is free software; you can redistribute it and/or
-dnl    modify it under the terms of the GNU Library General Public
-dnl    License as published by the Free Software Foundation; either
-dnl    version 2 of the License, or (at your option) any later version.
- 
-dnl    This library is distributed in the hope that it will be useful,
-dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
-dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-dnl    Library General Public License for more details.
- 
-dnl    You should have received a copy of the GNU Library General Public License
-dnl    along with this library; see the file COPYING.LIB.  If not, write to
-dnl    the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-dnl    Boston, MA 02110-1301, USA.
-
-# Original Author was Kalle@kde.org
-# I lifted it in some mater. (Stephan Kulow)
-# I used much code from Janos Farkas
-
-dnl Process this file with autoconf to produce a configure script.
-
-AC_INIT(acinclude.m4) dnl a source file from your sub dir
-
-dnl This is so we can use kde-common
-AC_CONFIG_AUX_DIR(admin)
-
-dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
-unset CDPATH
-
-dnl Checking host/target/build systems, for make, install etc.
-AC_CANONICAL_SYSTEM 
-dnl Perform program name transformation
-AC_ARG_PROGRAM
-
-dnl Automake doc recommends to do this only here. (Janos)
-AM_INIT_AUTOMAKE(kvkbd, 0.4.8) dnl searches for some needed programs
-
-KDE_SET_PREFIX
-
-dnl generate the config header
-AM_CONFIG_HEADER(config.h) dnl at the distribution this done
-
-dnl Checks for programs.
-AC_CHECK_COMPILERS
-AC_ENABLE_SHARED(yes)
-AC_ENABLE_STATIC(no)
-KDE_PROG_LIBTOOL
-
-dnl for NLS support. Call them in this order!
-dnl WITH_NLS is for the po files
-AM_KDE_WITH_NLS
-
-KDE_USE_QT(3.2.0)
-AC_PATH_KDE
-dnl =======================================================
-dnl FILE: configure.in.in
-dnl =======================================================
-
-#MIN_CONFIG(3.2.0)
-
-dnl PACKAGE set before
-AC_C_BIGENDIAN
-AC_CHECK_KDEMAXPATHLEN
-
-KDE_CREATE_SUBDIRSLIST
-AC_CONFIG_FILES([ Makefile ])
-AC_CONFIG_FILES([ doc/Makefile ])
-AC_CONFIG_FILES([ doc/en/Makefile ])
-AC_CONFIG_FILES([ po/Makefile ])
-AC_CONFIG_FILES([ src/Makefile ])
-AC_OUTPUT
-# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
-if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
-  # And if so, warn when they don't match
-  if test "$kde_libs_prefix" != "$given_prefix"; then
-    # And if kde doesn't know about the prefix yet
-    echo ":"`tde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
-    if test $? -ne 0; then
-      echo ""
-      echo "Warning: you chose to install this package in $given_prefix,"
-      echo "but KDE was found in $kde_libs_prefix."
-      echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
-      echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix"
-      echo "Then restart KDE."
-      echo ""
-    fi
-  fi
-fi
-
-if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
-  echo ""
-  echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
-  echo "was not included. Therefore, GCC symbol visibility support remains disabled."
-  echo ""
-  echo "For better performance, consider including the Qt visibility supporting patch"
-  echo "located at:"
-  echo ""
-  echo "http://bugs.kde.org/show_bug.cgi?id=109386"
-  echo ""
-  echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
-  echo "everything will continue to work just fine without it."
-  echo ""
-fi
-
-if test "$all_tests" = "bad"; then
-  if test ! "$cache_file" = "/dev/null"; then
-    echo ""
-    echo "Please remove the file $cache_file after changing your setup"
-    echo "so that configure will find the changes next time."
-    echo ""
-  fi
-else
-  echo ""
-  echo "Good - your configure finished. Start make now"
-  echo ""
-fi

configure.in.in

@@ -1,8 +0,0 @@
-#MIN_CONFIG(3.2.0)
-
-KDE_ENABLE_HIDDEN_VISIBILITY
-
-AM_INIT_AUTOMAKE(kvkbd, 0.4.8)
-AC_C_BIGENDIAN
-AC_CHECK_KDEMAXPATHLEN
-

doc/CMakeLists.txt

@@ -0,0 +1,14 @@
+file( GLOB _dirs RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} * )
+string( REGEX REPLACE "[ \r\n\t]+" ";" _linguas "$ENV{LINGUAS}" )
+
+foreach( _dir ${_dirs} )
+  if( IS_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/${_dir} AND
+      EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${_dir}/CMakeLists.txt )
+    if( "${_dir}" STREQUAL "en" OR
+        "${_dir}" STREQUAL "man" OR
+        "${_linguas}" MATCHES "^;*$" OR
+        ";${_linguas};" MATCHES ";${_dir};" )
+      add_subdirectory( ${_dir} )
+    endif( )
+  endif()
+endforeach()

doc/Makefile.am

@@ -1 +0,0 @@
-SUBDIRS = en

doc/en/CMakeLists.txt

@@ -0,0 +1 @@
+tde_create_handbook( DESTINATION ${PROJECT_NAME} )

doc/en/Makefile.am

@@ -1,2 +0,0 @@
-KDE_LANG = en
-KDE_DOCS = kvkbd

po/Makefile.am

@@ -1 +0,0 @@
-POFILES = AUTO

src/CMakeL10n.txt

@@ -0,0 +1,8 @@
+##### create translation templates ##############
+
+tde_l10n_create_template( "messages/kvkbd" )
+
+tde_l10n_create_template(
+    CATALOG "desktop_files/kvkbd.desktop/"
+    SOURCES kvkbd.desktop
+)

src/CMakeLists.txt

@@ -0,0 +1,50 @@
+include_directories(
+  ${CMAKE_BINARY_DIR}
+  ${CMAKE_CURRENT_BINARY_DIR}
+  ${CMAKE_CURRENT_SOURCE_DIR}
+  ${TDE_INCLUDE_DIR}
+  ${TQT_INCLUDE_DIRS}
+  ${X11_INCLUDE_DIR}
+  ${X11_XTest_INCLUDE_PATH}
+)
+
+link_directories(
+  ${TQT_LIBRARY_DIRS}
+  ${TDE_LIB_DIR}
+)
+
+
+##### kvkbd (executable)
+
+tde_add_executable( ${PROJECT_NAME} AUTOMOC
+
+  SOURCES
+        DragWidget.cpp
+        MainWidget.cpp
+        VButton.cpp
+        main.cpp
+        numpadvbutton.cpp
+        resizabledragwidget.cpp
+  LINK
+     tdecore-shared
+     tdeui-shared
+     tdeio-shared
+     ${X11_XTest_LIB}
+     
+  DESTINATION ${BIN_INSTALL_DIR}
+)
+
+
+##### icons
+
+tde_install_icons( ${PROJECT_NAME} )
+
+
+##### other data
+
+install(
+    FILES dock.png tray.png
+    DESTINATION ${DATA_INSTALL_DIR}/${PROJECT_NAME}/pics
+)
+
+tde_create_translated_desktop( ${PROJECT_NAME}.desktop )

src/DragWidget.cpp

@@ -33,3 +33,4 @@ void DragWidget::mouseMoveEvent(TQMouseEvent *e)
 	
 }
 
+#include "DragWidget.moc"

src/MainWidget.cpp

@@ -398,10 +398,10 @@ MainWidget::MainWidget ( TDEAboutData *about, bool tren, TQWidget *parent, const
 	setFocusPolicy ( TQ_NoFocus );
 
 
-	
-
 	int padx= 550;
-	TQString txt[9] = {"Ho\nme","▲","Pg\nUp","◄"," ","►","End","▼","Pg\nDn"};
+	TQString txt[9] = { "Ho\nme", TQString::fromUtf8("▲"), "Pg\nUp",
+		TQString::fromUtf8("◄"), " ", TQString::fromUtf8("►"),
+		"End", TQString::fromUtf8("▼"), "Pg\nDn" };
 	TQString nump[9] = {"7","8","9","4","5","6","1","2","3"};
 	int val=0;
 	int nval[9] = {16,17,18,13,14,15,10,11,12};
@@ -412,8 +412,8 @@ MainWidget::MainWidget ( TDEAboutData *about, bool tren, TQWidget *parent, const
 			v->move(padx+(b*35),sty+(a*35));
 			v->res();
 			v->setKeyCode(nval[val],cval[val]);
-			v->setText(TQString::fromUtf8(txt[val]));
+			v->setText(txt[val]);
-			v->setShiftText(TQString::fromUtf8(nump[val]));
+			v->setShiftText(nump[val]);
 			numl_keys.append(v);
 			connect ( v, TQT_SIGNAL ( keyClick ( unsigned int ) ), this, TQT_SLOT ( keyPress ( unsigned int ) ) );
 			val++;
@@ -1826,7 +1826,7 @@ void KbdTray::mousePressEvent(TQMouseEvent *e)
 	}
 }
 
-
+#include "MainWidget.moc"
 
 
 

src/Makefile.am

@@ -1,38 +0,0 @@
-# set the include path for X, qt and KDE
-INCLUDES = $(all_includes)
-
-# these are the headers for your project
-noinst_HEADERS = DragWidget.h KeyClip.h MainWidget.h VButton.h numpadvbutton.h
-
-# let automoc handle all of the meta source files (moc)
-
-messages: rc.cpp
-	$(EXTRACTRC) `find . -name \*.ui -o -name \*.rc` > rc.cpp
-	$(XGETTEXT) *.cpp -o $(podir)/kvkbd.pot
-
-KDE_ICON = kvkbd
-
-#########################################################################
-# APPLICATION SECTION
-#########################################################################
-# this is the program that gets installed.  it's name is used for all
-# of the other Makefile.am variables
-bin_PROGRAMS = kvkbd
-
-# the application source, library search path, and link libraries
-kvkbd_SOURCES = DragWidget.cpp KeyClip.cpp MainWidget.cpp VButton.cpp main.cpp \
-	numpadvbutton.cpp resizabledragwidget.cpp resizabledragwidget.h
-kvkbd_LDFLAGS = $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor
-kvkbd_LDADD = -lXtst $(LIB_TDEUI)
-
-# this is where the desktop file will go 
-shelldesktopdir = $(kde_appsdir)/Utilities
-shelldesktop_DATA = kvkbd.desktop
-
-# this is where the shell's XML-GUI resource file goes
-shellrcdir = $(kde_datadir)/kvkbd
-
-picsdir = $(kde_datadir)/kvkbd/pics
-picsdir_DATA = dock.png tray.png
-picsdirdir = $(kde_datadir)/kvkbd/pics
-METASOURCES = AUTO

src/VButton.cpp

@@ -119,3 +119,5 @@ void VButton::timerEvent(TQTimerEvent *)
 	}
 	sendKey();
 }
+
+#include "VButton.moc"

src/kvkbd.desktop

@@ -1,7 +1,6 @@
 [Desktop Entry]
 Encoding=UTF-8
 Name=Kvkbd
-Name[xx]=xxkvkbdxx
 GenericName=Virtual Keyboard
 Exec=kvkbd
 Icon=kvkbd

src/kvkbd.lsm

@@ -1,14 +0,0 @@
-Begin4
-Title:          kvkbd
-Version:        R14.0.0
-Entered-date:   2010-05-10
-Description:    A virtual keyboard for the Trinity Desktop Environment
-Keywords:       TDE Qt
-Author:         Todor Gyumyushev <yodor@developer.bg>
-Maintained-by:  The Trinity Desktop Environment (TDE) http://www.trinitydesktop.org/
-Primary-site:   http://git.trinitydesktop.org/cgit/
-Alternate-site:
-Original-site:  http://kde-apps.org/content/show.php/Kvkbd?content=56019
-Platforms:      Linux and other Unices running TDE
-Copying-policy: GPL
-End

src/main.cpp

@@ -45,8 +45,8 @@ static TDECmdLineOptions options[] =
 
 void findAloneWindow()
 {
-	unsigned int numkids, i,mapped,scrn;
+	unsigned int numkids, scrn;
-	Window r, p;
+	Window root_id, parent_id;
 	Window *kids=0;
 	//XWindowAttributes attr;
 	Window root;
@@ -59,11 +59,11 @@ void findAloneWindow()
 	scrn = DefaultScreen(dipsy);
 	root = RootWindow(dipsy, scrn);
 	
-	mapped = 0;
+	
-	XQueryTree(dipsy, root, &r, &p, &kids, &numkids);
+	XQueryTree(dipsy, root, &root_id, &parent_id, &kids, &numkids);
 		
 
-	for (i = 0; i < numkids;  ++i)
+	for (unsigned int i = 0; i < numkids;  ++i)
 	{
 			XFetchName(dipsy, kids[i], &win_name);
 			TQString c(win_name);

src/numpadvbutton.cpp

@@ -48,3 +48,5 @@ void NumpadVButton::setKeyCode(unsigned int numpad_keycode, unsigned int cursor_
 	numlock_code = numpad_keycode;
 	VButton::setKeyCode(cursor_code);
 }
+
+#include "numpadvbutton.moc"

src/resizabledragwidget.cpp

@@ -89,4 +89,4 @@ void ResizableDragWidget::paintEvent(TQPaintEvent *)
 	
 }
 
-
+#include "resizabledragwidget.moc"

subdirs

@@ -1,3 +0,0 @@
-doc
-po
-src

templates/cpp

@@ -1,19 +0,0 @@
-/***************************************************************************
- *   Copyright (C) 2007 by Todor Gyumyushev   *
- *   yodor@developer.bg   *
- *                                                                         *
- *   This program is free software; you can redistribute it and/or modify  *
- *   it under the terms of the GNU General Public License as published by  *
- *   the Free Software Foundation; either version 2 of the License, or     *
- *   (at your option) any later version.                                   *
- *                                                                         *
- *   This program is distributed in the hope that it will be useful,       *
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- *   GNU General Public License for more details.                          *
- *                                                                         *
- *   You should have received a copy of the GNU General Public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.             *
- ***************************************************************************/

templates/h

@@ -1,19 +0,0 @@
-/***************************************************************************
- *   Copyright (C) 2007 by Todor Gyumyushev   *
- *   yodor@developer.bg   *
- *                                                                         *
- *   This program is free software; you can redistribute it and/or modify  *
- *   it under the terms of the GNU General Public License as published by  *
- *   the Free Software Foundation; either version 2 of the License, or     *
- *   (at your option) any later version.                                   *
- *                                                                         *
- *   This program is distributed in the hope that it will be useful,       *
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- *   GNU General Public License for more details.                          *
- *                                                                         *
- *   You should have received a copy of the GNU General Public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.             *
- ***************************************************************************/

translations/CMakeLists.txt

@@ -0,0 +1 @@
+tde_auto_add_subdirectories()

translations/desktop_files/kvkbd.desktop/kvkbd.desktop.pot

@@ -0,0 +1,32 @@
+# SOME DESCRIPTIVE TITLE.
+# This file is put in the public domain.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2020-05-03 10:29+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Name
+#: kvkbd.desktop:3
+msgid "Kvkbd"
+msgstr ""
+
+#. GenericName
+#: kvkbd.desktop:4
+msgid "Virtual Keyboard"
+msgstr ""
+
+#. Comment
+#: kvkbd.desktop:8
+msgid "A virtual keyboard for TDE"
+msgstr ""

translations/messages/CMakeLists.txt

@@ -0,0 +1,14 @@
+file( GLOB_RECURSE po_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.po )
+string( REGEX REPLACE "[ \r\n\t]+" ";" _linguas "$ENV{LINGUAS}" )
+
+foreach( _po ${po_files} )
+  get_filename_component( _lang ${_po} NAME_WE )
+  if( "${_linguas}" MATCHES "^;*$" OR ";${_linguas};" MATCHES ";${_lang};" )
+    if( "${_po}" MATCHES "^([^/]*)/.*" )
+      string( REGEX REPLACE "^([^/]*)/.*" "\\1" _component "${_po}" )
+    else( )
+      set( _component "${PROJECT_NAME}" )
+    endif( )
+    tde_create_translation( FILES ${_po} LANG ${_lang} OUTPUT_NAME ${_component} )
+  endif( )
+endforeach( )

translations/messages/de.po

@@ -0,0 +1,40 @@
+# SOME DESCRIPTIVE TITLE.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"POT-Creation-Date: 2020-05-11 04:28+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: none\n"
+"Language: de\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr ""
+
+#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr ""
+
+#: main.cpp:36
+msgid "A virtual keyboard for TDE"
+msgstr ""
+
+#: main.cpp:42
+msgid ""
+"Stand alone version for use with TDM or XDM. \n"
+"You should Add : HOME=/root kvkbd --loginhelper & to Xsetup to run in xdm/tdm"
+msgstr ""
+
+#: main.cpp:186
+msgid "kvkbd"
+msgstr ""

translations/messages/kvkbd.pot

@@ -0,0 +1,42 @@
+# SOME DESCRIPTIVE TITLE.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"POT-Creation-Date: 2020-05-11 13:18+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
+#, ignore-inconsistent
+msgid ""
+"_: NAME OF TRANSLATORS\n"
+"Your names"
+msgstr ""
+
+#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
+#, ignore-inconsistent
+msgid ""
+"_: EMAIL OF TRANSLATORS\n"
+"Your emails"
+msgstr ""
+
+#: main.cpp:36
+msgid "A virtual keyboard for TDE"
+msgstr ""
+
+#: main.cpp:42
+msgid ""
+"Stand alone version for use with TDM or XDM. \n"
+"You should Add : HOME=/root kvkbd --loginhelper & to Xsetup to run in xdm/tdm"
+msgstr ""
+
+#: main.cpp:186
+msgid "kvkbd"
+msgstr ""