You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
amarok/amarok/src/engine/helix/helix-sp/helix-include/common/include/hxcomm.h

626 lines
14 KiB

/*
*
* This software is released under the provisions of the GPL version 2.
* see file "COPYING". If that file is not available, the full statement
* of the license can be found at
*
* http://www.fsf.org/licensing/licenses/gpl.txt
*
* Portions Copyright (c) 1995-2004 RealNetworks, Inc. All Rights Reserved.
*
*/
#ifndef _HXCOMM_H_
#define _HXCOMM_H_
#include "hxengin.h" /* For HXTimeval */
#include "hxccf.h" /* For IHXCommonClassFactory. Formerly declared in this file. */
/*
* Forward declarations of some interfaces defined here-in.
*/
typedef _INTERFACE IHXStatistics IHXStatistics;
typedef _INTERFACE IHXRegistryID IHXRegistryID;
typedef _INTERFACE IHXServerFork IHXServerFork;
typedef _INTERFACE IHXServerControl IHXServerControl;
typedef _INTERFACE IHXReconfigServerResponse IHXReconfigServerResponse;
typedef _INTERFACE IHXBuffer IHXBuffer;
typedef _INTERFACE IHXWantServerReconfigNotification
IHXWantServerReconfigNotification;
typedef _INTERFACE IHXFastAlloc IHXFastAlloc;
/****************************************************************************
*
* Interface:
*
* IHXStatistics
*
* Purpose:
*
* This interface allows update of the client statistics.
*
* IID_IHXStatistics:
*
* {00000001-0901-11d1-8B06-00A024406D59}
*
*/
DEFINE_GUID(IID_IHXStatistics, 0x00000001, 0x901, 0x11d1, 0x8b, 0x6, 0x0,
0xa0, 0x24, 0x40, 0x6d, 0x59);
#undef INTERFACE
#define INTERFACE IHXStatistics
DECLARE_INTERFACE_(IHXStatistics, IUnknown)
{
/*
* IUnknown methods
*/
STDTQT_METHOD(QueryInterface) (THIS_
REFIID riid,
void** ppvObj) PURE;
STDMETHOD_(ULONG32,AddRef) (THIS) PURE;
STDMETHOD_(ULONG32,Release) (THIS) PURE;
/*
* IHXStatistics methods
*/
/************************************************************************
* Method:
* IHXStatistics::Init
* Purpose:
* Pass registry ID to the caller
*
*/
STDTQT_METHOD(InitializeStatistics) (THIS_
UINT32 /*IN*/ ulRegistryID) PURE;
/************************************************************************
* Method:
* IHXStatistics::Update
* Purpose:
* Notify the client to update its statistics stored in the registry
*
*/
STDTQT_METHOD(UpdateStatistics) (THIS) PURE;
};
/****************************************************************************
*
* Interface:
*
* IHXRegistryID
*
* Purpose:
*
* This interface is implemented by IHXPlayer, IHXStreamSource,
* and IHXStream. It allows the user to get the registry Base ID,
* for an object that you have a pointer to.
*
* IID_IHXRegistryID:
*
* {00000002-0901-11d1-8B06-00A024406D59}
*
*/
DEFINE_GUID(IID_IHXRegistryID, 0x00000002, 0x901, 0x11d1, 0x8b, 0x6, 0x0,
0xa0, 0x24, 0x40, 0x6d, 0x59);
#undef INTERFACE
#define INTERFACE IHXRegistryID
DECLARE_INTERFACE_(IHXRegistryID, IUnknown)
{
/*
* IUnknown methods
*/
STDTQT_METHOD(QueryInterface) (THIS_
REFIID riid,
void** ppvObj) PURE;
STDMETHOD_(ULONG32,AddRef) (THIS) PURE;
STDMETHOD_(ULONG32,Release) (THIS) PURE;
/*
* IHXRegistryID methods
*/
/************************************************************************
* Method:
* IHXRegistryID::GetID
* Purpose:
* Get the registry ID of the object.
*
*/
STDTQT_METHOD(GetID) (THIS_
REF(UINT32) /*OUT*/ ulRegistryID) PURE;
};
/****************************************************************************
*
* Interface:
*
* IHXServerFork
*
* Purpose:
*
* This interface is implemented by the server context on Unix
* platforms. This interface allows your plugin to fork off a
* process. Note that the process that is forked off cannot use
* any RMA APIs. The fork() system call is prohibited from within
* a RMA plugin.
*
* IID_IHXServerFork:
*
* {00000003-0901-11d1-8B06-00A024406D59}
*
*/
DEFINE_GUID(IID_IHXServerFork, 0x00000003, 0x901, 0x11d1, 0x8b, 0x6, 0x0,
0xa0, 0x24, 0x40, 0x6d, 0x59);
#undef INTERFACE
#define INTERFACE IHXServerFork
DECLARE_INTERFACE_(IHXServerFork, IUnknown)
{
/*
* IUnknown methods
*/
STDTQT_METHOD(QueryInterface) (THIS_
REFIID riid,
void** ppvObj) PURE;
STDMETHOD_(ULONG32,AddRef) (THIS) PURE;
STDMETHOD_(ULONG32,Release) (THIS) PURE;
/*
* IHXServerFork methods
*/
/************************************************************************
* Method:
* IHXServerFork::Fork
* Purpose:
* Fork off a child process. The child process cannot use any RMA
* APIs. Upon successful completion, Fork returns 0 to the child
* process and the PID of the child to the parent. A return value
* of -1 indicates an error.
*
* Note: The child process should *NOT* Release any interfaces.
* The cleanup of the IHXServerFork() interface and other
* RMA interfaces is done by the parent.
*
*/
STDMETHOD_(INT32, Fork) (THIS) PURE;
};
/*
*
* Interface:
*
* IHXServerControl
*
* Purpose:
*
* This interface provides access to the RealMedia server's controls
* for shutting down (for now).
*
* Note: This registry is not related to the Windows system registry.
*
* IID_IHXServerControl:
*
* {00000004-0901-11d1-8B06-00A024406D59}
*
*/
DEFINE_GUID(IID_IHXServerControl, 0x00000004, 0x901, 0x11d1, 0x8b, 0x6, 0x0,
0xa0, 0x24, 0x40, 0x6d, 0x59);
#define CLSID_IHXServerControl IID_IHXServerControl
#undef INTERFACE
#define INTERFACE IHXServerControl
DECLARE_INTERFACE_(IHXServerControl, IUnknown)
{
/*
* IUnknown methods
*/
STDTQT_METHOD(QueryInterface) (THIS_
REFIID riid,
void** ppvObj) PURE;
STDMETHOD_(ULONG32,AddRef) (THIS) PURE;
STDMETHOD_(ULONG32,Release) (THIS) PURE;
/*
* IHXServerControl methods
*/
/************************************************************************
* Method:
* IHXServerControl::ShutdownServer
* Purpose:
* Shutdown the server.
*/
STDTQT_METHOD(ShutdownServer) (THIS_
UINT32 status) PURE;
};
/*
*
* Interface:
*
* IHXServerControl2
*
* Purpose:
*
* Interface for extended server control methods.
*
*
* IID_IHXServerControl2:
*
* {00000005-0901-11d1-8B06-00A024406D59}
*
*/
DEFINE_GUID(IID_IHXServerControl2, 0x00000005, 0x901, 0x11d1, 0x8b, 0x6, 0x0,
0xa0, 0x24, 0x40, 0x6d, 0x59);
#undef INTERFACE
#define INTERFACE IHXServerControl2
DECLARE_INTERFACE_(IHXServerControl2, IUnknown)
{
/*
* IUnknown methods
*/
STDTQT_METHOD(QueryInterface) (THIS_
REFIID riid,
void** ppvObj) PURE;
STDMETHOD_(ULONG32,AddRef) (THIS) PURE;
STDMETHOD_(ULONG32,Release) (THIS) PURE;
/*
* IHXServerControl2 methods
*/
/************************************************************************
* IHXServerControl2::RestartServer
*
* Purpose:
*
* Completely shutdown the server, then restart. Mainly used to
* cause not hot setting config var changes to take effect.
*/
STDTQT_METHOD(RestartServer) (THIS) PURE;
/************************************************************************
* IHXServerControl2::ReconfigServer
*
* Purpose:
*
* Used to cause the server to re-read in config from file or registry
* (however it was started) and attempt to use the values.
*/
STDTQT_METHOD(ReconfigServer) (THIS_ IHXReconfigServerResponse* pResp) PURE;
};
/*
*
* Interface:
*
* IHXReconfigServerResponse
*
* Purpose:
*
* Response interface for IHXServerControl2::ReconfigServer
*
*
* IID_IHXReconfigServerResponse:
*
* {00000006-0901-11d1-8B06-00A024406D59}
*
*/
DEFINE_GUID(IID_IHXReconfigServerResponse, 0x00000006, 0x901, 0x11d1, 0x8b, 0x6, 0x0,
0xa0, 0x24, 0x40, 0x6d, 0x59);
#undef INTERFACE
#define INTERFACE IHXReconfigServerResponse
DECLARE_INTERFACE_(IHXReconfigServerResponse, IUnknown)
{
/*
* IUnknown methods
*/
STDTQT_METHOD(QueryInterface) (THIS_
REFIID riid,
void** ppvObj) PURE;
STDMETHOD_(ULONG32,AddRef) (THIS) PURE;
STDMETHOD_(ULONG32,Release) (THIS) PURE;
/************************************************************************
* IHXReconfigServerResponse::ReconfigServerDone
*
* Purpose:
*
* Notification that reconfiguring the server is done.
*/
STDTQT_METHOD(ReconfigServerDone) (THIS_
HX_RESULT res,
IHXBuffer** pInfo,
UINT32 ulNumInfo) PURE;
};
/*
*
* Interface:
*
* IHXServerReconfigNotification
*
* Purpose:
*
* Register with the server that you want notification when a reconfig
* request comes in and want/need to take part in the reconfiguration. This
* is used when you have configuration info outside the server config file
* which needs to be re-initialized.
*
*
* IID_IHXServerReconfigNotification:
*
* {00000007-0901-11d1-8B06-00A024406D59}
*
*/
DEFINE_GUID(IID_IHXServerReconfigNotification, 0x00000007, 0x901, 0x11d1, 0x8b, 0x6, 0x0,
0xa0, 0x24, 0x40, 0x6d, 0x59);
#undef INTERFACE
#define INTERFACE IHXServerReconfigNotification
DECLARE_INTERFACE_(IHXServerReconfigNotification, IUnknown)
{
/*
* IUnknown methods
*/
STDTQT_METHOD(QueryInterface) (THIS_
REFIID riid,
void** ppvObj) PURE;
STDMETHOD_(ULONG32,AddRef) (THIS) PURE;
STDMETHOD_(ULONG32,Release) (THIS) PURE;
/************************************************************************
* IHXServerReconfigNotification::WantReconfigNotification
*
* Purpose:
*
* Tell the server that you want reconfig notification.
*/
STDTQT_METHOD(WantReconfigNotification) (THIS_
IHXWantServerReconfigNotification* pResponse) PURE;
/************************************************************************
* IHXServerReconfigNotification::CancelReconfigNotification
*
* Purpose:
*
* Tell the server that you no longer want reconfig notification.
*/
STDTQT_METHOD(CancelReconfigNotification) (THIS_
IHXWantServerReconfigNotification* pResponse) PURE;
};
/*
*
* Interface:
*
* IHXWantServerReconfigNotification
*
* Purpose:
*
* Tell user that the server got a reconfig request and it is time to
* do your reconfiguration. NOTE: You should not need this if all of your
* configuration is stored in the config file; that is taken care of through
* IHXActiveRegistry.
*
* IID_IHXWantServerReconfigNotification:
*
* {00000008-0901-11d1-8B06-00A024406D59}
*
*/
DEFINE_GUID(IID_IHXWantServerReconfigNotification, 0x00000008, 0x901, 0x11d1, 0x8b, 0x6, 0x0,
0xa0, 0x24, 0x40, 0x6d, 0x59);
#undef INTERFACE
#define INTERFACE IHXWantServerReconfigNotification
DECLARE_INTERFACE_(IHXWantServerReconfigNotification, IUnknown)
{
/*
* IUnknown methods
*/
STDTQT_METHOD(QueryInterface) (THIS_
REFIID riid,
void** ppvObj) PURE;
STDMETHOD_(ULONG32,AddRef) (THIS) PURE;
STDMETHOD_(ULONG32,Release) (THIS) PURE;
/************************************************************************
* IHXWantServerReconfigNotification::ServerReconfig
*
* Purpose:
*
* Notify user that a server reconfig request had come in and it
* is now your turn to do external (not server config) reconfiguration.*
*/
STDTQT_METHOD(ServerReconfig) (THIS_
IHXReconfigServerResponse* pResponse) PURE;
};
// $Private:
DEFINE_GUID(IID_IHXResolverExec, 0x00000009, 0x901, 0x11d1, 0x8b, 0x6, 0x0,
0xa0, 0x24, 0x40, 0x6d, 0x59);
#undef INTERFACE
#define INTERFACE IHXResolverExec
DECLARE_INTERFACE_(IHXResolverExec, IUnknown)
{
/*
* IUnknown methods
*/
STDTQT_METHOD(QueryInterface) (THIS_
REFIID riid,
void** ppvObj) PURE;
STDMETHOD_(ULONG32,AddRef) (THIS) PURE;
STDMETHOD_(ULONG32,Release) (THIS) PURE;
STDTQT_METHOD(ResolverExec) (THIS_ int readfd, int writefd) PURE;
};
/****************************************************************************
*
* Interface:
*
* IHXFastAlloc
*
* Purpose:
*
* Basic memory management interface.
*
* IID_IHXFastAlloc:
*
* {0000000a-0901-11d1-8B06-00A024406D59}
*
*/
DEFINE_GUID(IID_IHXFastAlloc, 0x0000000a, 0x901, 0x11d1, 0x8b, 0x6, 0x0,
0xa0, 0x24, 0x40, 0x6d, 0x59);
#undef INTERFACE
#define INTERFACE IHXFastAlloc
DECLARE_INTERFACE_(IHXFastAlloc, IUnknown)
{
/*
* IUnknown methods
*/
STDTQT_METHOD(QueryInterface) (THIS_
REFIID riid,
void** ppvObj) PURE;
STDMETHOD_(ULONG32,AddRef) (THIS) PURE;
STDMETHOD_(ULONG32,Release) (THIS) PURE;
/*
* IHXFastAlloc methods
*/
STDMETHOD_(void*,FastAlloc) (THIS_
UINT32 /*IN*/ count) PURE;
STDMETHOD_(void,FastFree) (THIS_
void* /*IN*/ pMem) PURE;
};
#define FAST_CACHE_MEM\
void* operator new(size_t size, IHXFastAlloc* pMalloc = NULL)\
{\
void* pMem;\
if (pMalloc)\
{\
pMem = pMalloc->FastAlloc(size + sizeof(IHXFastAlloc*));\
}\
else\
{\
pMem = (void *)::new char [size + sizeof(IHXFastAlloc*)];\
}\
*(IHXFastAlloc**)pMem = pMalloc;\
return ((unsigned char*)pMem + sizeof(IHXFastAlloc*));\
}\
\
void operator delete(void* pMem)\
{\
pMem = (unsigned char*)pMem - sizeof(IHXFastAlloc*);\
IHXFastAlloc* pMalloc = *(IHXFastAlloc**)pMem;\
if (pMalloc)\
{\
pMalloc->FastFree((char *)pMem);\
}\
else\
{\
delete[] (char *)pMem;\
}\
}\
/****************************************************************************
*
* Interface:
*
* IHXAccurateClock
*
* Purpose:
*
* High Accuracy, Cheap (no system-call) gettimeofday()
* [ Only available on some Unix platforms, except QI can fail!! ]
*
* IID_IHXAccurateClock:
*
* {0000000b-0901-11d1-8B06-00A024406D59}
*
*/
DEFINE_GUID(IID_IHXAccurateClock, 0x0000000b, 0x901, 0x11d1, 0x8b, 0x6, 0x0,
0xa0, 0x24, 0x40, 0x6d, 0x59);
#undef INTERFACE
#define INTERFACE IHXAccurateClock
DECLARE_INTERFACE_(IHXAccurateClock, IUnknown)
{
/*
* IUnknown methods
*/
STDTQT_METHOD(QueryInterface) (THIS_
REFIID riid,
void** ppvObj) PURE;
STDMETHOD_(ULONG32,AddRef) (THIS) PURE;
STDMETHOD_(ULONG32,Release) (THIS) PURE;
/*
* IHXAccurateClock methods
*/
STDMETHOD_(HXTimeval,GetTimeOfDay) (THIS) PURE;
};
// $EndPrivate.
#endif /*_HXCOMM_H_*/