You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
dbus-1-tqt/tqdbusconnection.h

664 lines
24 KiB

/* qdbusconnection.h TQT_DBusConnection object
*
* Copyright (C) 2005 Harald Fernengel <harry@kdevelop.org>
* Copyright (C) 2005-2007 Kevin Krammer <kevin.krammer@gmx.at>
*
* Licensed under the Academic Free License version 2.1
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA.
*
*/
#ifndef TQDBUSCONNECTION_H
#define TQDBUSCONNECTION_H
/**
* @mainpage TQt3 Bindings for D-Bus
*
* D-Bus is an IPC (inter process communication) technology designed to allow
* applications to interoperate without requiring tight coupling.
*
* For more information about D-Bus itself see its website:
* http://www.freedesktop.org/wiki/Software_2fdbus
*
* The TQt3 D-Bus bindings described here are a TQt3 style API around the base
* implementation to enable TQt3 developers to use D-Bus in their applications
* without requiring them to know about the details of the C based D-Bus API.
*
* The two main use cases are:
* - using the API to access service implemented in other applications.
* See section @ref dbusclient for an introduction on this
*
* - using the API to provide access to services implemented in your application
* See section @ref dbusservice for an introduction on this
*
* Of course an application can do both at the same time.
*/
/**
* @page dbusconventions Naming and syntax conventions in D-Bus
*
* @section dbusconventions-servicename Service names
*
* The service name is D-Bus application identifier, i.e. either
* the unique name handed out to the peer application by the bus on connect
* (see TQT_DBusConnection::uniqueName()) or, more likely, a well known name the
* peer application has requested, see TQT_DBusConnection::requestName()
*
* Such well known names have the form of word separated by dots, like
* Internet domain names but in reverse order.
*
* For example the name for the bus itself (the D-Bus daemon) would be
* @code
* "org.freedesktop.DBus"
* @endcode
*
* @section dbusconventions-objectpath Object paths
*
* The object path is like an address within the peer host application.
* The path format looks like a Unix file path, i.e. words separated by
* slash @c '/' characters.
*
* For example the path for the bus itself (the D-Bus daemon's main object)
* would be
* @code
* "/org/freedesktop/DBus"
* @endcode
*
* @section dbusconventions-interfacename Interface names
*
* The interface name specifies which group of methods and signals
* implemented by the peer service object is used in proxy operations.
*
* Interface names have the form of word separated by dots, like Internet
* domain names but in reverse order or like a fully qualified Java class name.
*
* For example the interface for the bus itself (the D-Bus daemon's main
* interface) would be
* @code
* "org.freedesktop.DBus"
* @endcode
*
* @section dbusconventions-errorname Error names
*
* A D-Bus error name is a sequence of words separated by dots, similar
* to D-Bus service names or interface names, or like a fully qualified
* Java class name.
*
* For example if a D-Bus service does not handle a method invocation sent
* to it because it doesn't know about the method it will return a D-Bus
* error named
* @code
* "org.freedesktop.DBus.Error.UnknownMethod"
* @endcode
* TQT_DBusError can create some of the more common errors based on a type value
* and decode their names into the type respectively. See TQT_DBusError#ErrorType
*
* @section dbusconventions-membername Method and signal names
*
* There is no mandatory convention for member names, neither for methods nor
* for signals.
*
* However, using the standard interfaces of D-Bus as a hint, it is recommended
* to use "camel case" names starting with an uppercase letter, for example
* @code
* "GetConnectionUnixUser"
* @endcode
*/
#include "tqdbusmacros.h"
#include <tqstring.h>
class TQT_DBusConnectionPrivate;
class TQT_DBusError;
class TQT_DBusMessage;
class TQT_DBusObjectBase;
class TQObject;
/**
* @brief Provides access to a specific D-Bus bus
*
* In order to access a D-Bus message bus an application has to connect to it.
* This is very similar to connecting to an FTP server using TQFtp, where any
* number of commands can be sent in sequence over the same connection.
*
* Additionally to the asynchronous command execution provided by TQFtp a
* TQT_DBusConnection can also execute synchronous (blocking) calls so the
* code around those calls stays closer to in-process method incovations.
*
* However it is recommended to only perform blocking calls on D-Bus service
* methods that are likely to be processed fast.
*
* TQT_DBusConnection implements a shared resource, i.e. if you create a
* connection with a specific name in one part of your code and then
* create one with the same name somewhere else, the second creation will
* actually return the same shared connection object the first caller created.
*
* The application can be connected to more than one message bus simultaniously
* using one or more connections per bus, however the most common case is to
* have one connection per bus.
*
* The two main bus types are:
* - System bus: a bus connecting applications on one system across user
* or session boundaries, for example allowing to communicate
* with system services like printer spoolers, etc
*
* - Session bus: a bus connecting applications within one user session, for
* example started at login or by a session manager. Use cases
* or this kind of bus would be accessing user specific
* resources like addressbooks, retrieving user settings or
* controlling session services (e.g. disabling screensaver
* in a video player application during playback)
*
* While TQT_DBusConnection provides the basic API to access D-Bus services
* it is more convenient to use TQT_DBusProxy on top of the connection.
*
* See sections @ref dbusclient and @ref dbusservice for examples
*/
class TQDBUS_EXPORT TQT_DBusConnection
{
public:
/**
* DBus bus types
*/
enum BusType
{
/**
* The session bus is a user and user session specific message
* channel. It will usually be started by a login script or a
* session manager.
*/
SessionBus,
/**
* The system bus is a message channel bridging user level and
* system level process boundaries, e.g. it can allow a user process
* with normal user access restrictions to perform a limited subset
* of operations on a process running with elevated rights.
*
* @warning if an applications exposed services on the system bus, i.e.
* registers objects using registerObject(), it should be
* carefully examined on potential security issues
*/
SystemBus,
// TODO tqfind out about ActivationBus purpose
ActivationBus
};
/**
* @brief Creates an empty/disconnected connection handle
*
* This is mainly used for initializing variables of this type, i.e. like
* the default TQString constructor.
*
* A variable set to such an empty connection can be assigned a working
* connection at any time.
*/
TQT_DBusConnection();
/**
* @brief Creates a connection handle to a named connection
*
* This will result in an disconnected connection handle if no
* connection with that name has been created by addConnection before.
*
* Therefore it is recommended to use addConnection() instead to get a
* connection handle.
*
* @param name identifier of the shared connection object
*/
TQT_DBusConnection(const TQString &name);
/**
* @brief Creates a shallow copy of the given connection
*
* Allows to pass connection handles around by value, similar to TQString
* thus avoiding problems like dangling pointers in application code
*
* @param other the connection to copy from
*/
TQT_DBusConnection(const TQT_DBusConnection &other);
/**
* @brief Destroys the connection handle
*
* If this handle is the last one referencing the shared connection object
* it will delete it, disconnecting it from any objects it was
* collaborating with
*/
~TQT_DBusConnection();
/**
* @brief Creates a shallow copy of the given connection
*
* Allows to pass connection handles around by value, similar to TQString
* thus avoiding problems like dangling pointers in application code
*
* @param other the connection to copy from
*
* @return a reference to this instance as required by assigment operator
* semantics
*/
TQT_DBusConnection &operator=(const TQT_DBusConnection &other);
/**
* @brief Returns whether the connection is connected to a bus
*
* @return @c true if the connection can be used, @c false if the handle
* does not have access to a shared connection object or if the
* connection to the bus could not be established or broke
*/
bool isConnected() const;
/**
* @brief Returns the last error seen by the connection
*
* This can be a connection error, e.g. attempt to connect failed, or a
* transmission error or an error reported by a method call
*
* @return the last error seen by the connection
*/
TQT_DBusError lastError() const;
/**
* @brief Flags for controlling the behavior name collision handling
*
* @see requestName()
*/
enum NameRequestMode
{
/**
* Do not allow others to take over a name requested by this
* application
*/
NoReplace = 0,
/**
* Allow other applications that request the same name to get it,
* i.e. allow the bus to transfer the name from this application
* to the one requesting it
*/
AllowReplace = 1,
/**
* Try to get the name transferred from the current owner to this
* application. This will only work if the other application as
* requested the name using the AllowReplace flag
*/
ReplaceExisting = 2
};
/**
* @brief Requests to be addressable on the bus by a given name
*
* Each connection to a bus gets a unique name once the connection is
* established. This is similar to getting an IP address when connecting
* to the Internet.
*
* If an application's purpose is to provide services to other applications
* the other applications require to know how to address the service
* provider. Similar to a domain name on the Internet D-Bus allows to
* register names on the bus and be addressed through those names instead
* of the connection identifier.
*
* @note this is not required if the application only needs to acccess
* services or only implements generic service APIs
*
* If more than one application request the same name, D-Bus will try
* to resolve this conflict as good as possible.
* The #NameRequestMode flags allow to control how an application prefers
* to be treated in such a conflict.
*
* @param name the name the connection should be addressable with. See
* section @ref dbusconventions-servicename
* @param modeFlags an OR'ed combination of #NameRequestMode flags
*
* @return @c true if the name request was successfull, @c false if
* the connection is not connected to a bus or the name is already
* taken and cannot be tranferred
*
* @see uniqueName()
*/
bool requestName(const TQString &name, int modeFlags = NoReplace);
/**
* @brief Returns the connection identifier assigned at connect
*
* The unique name is the connection address or identifier the bus assigned
* to this connection when it got established.
*
* @return the connection's unique bus identifier
*
* @see requestName()
*/
TQString uniqueName() const;
/**
* @brief Sends a message over the bus
*
* Sends a message composed through the TQT_DBusMessage API to the bus.
* This is the main method for service objects (see TQT_DBusObjectBase) to
* send replies and errors for method calls they accepted or for sending
* D-Bus signals.
*
* @note for doing method calls it is more convenient to use TQT_DBusProxy,
* see TQT_DBusProxy::send()
*
* @param message the message to send
*
* @return @c true if sending succeeded, @c false if the connection is not
* connected, if the message lacks information about the recepient
* or if sending fails a at a lower level in the communication
* stack
*
* @see lastError()
*/
bool send(const TQT_DBusMessage &message) const;
/**
* @brief Sends a message over the bus and waits for the reply
*
* Sends a message composed through the TQT_DBusMessage API to the bus.
* It then blocks and waits until the associated reply is received.
* Any message received in between is stored and can be processed
* by calling dispatch() or scheduleDispatch()
*
* @note for doing method calls it is more convenient to use TQT_DBusProxy,
* see TQT_DBusProxy::sendWithReply()
*
* @param message the message to send
* @param error an optional parameter to directly get any error that might
* occur during processing of the call
*
* @return a message containing either the call's reply or an invalid
* message in case the call failed
*
* @see lastError()
*/
TQT_DBusMessage sendWithReply(const TQT_DBusMessage &message, TQT_DBusError *error = 0) const;
/**
* @brief Sends a message over the bus, specifying a receiver object for
* replies
*
* Sends a message composed through the TQT_DBusMessage API to the bus and
* returns an identifier number to associate with the reply once it is
* received by the given receiver.
* See TQT_DBusMessage::replySerialNumber()
*
* The required slot signature is
* @code
* void slotname(const TQT_DBusMessage&);
* @endcode
*
* @note for doing method calls it is more convenient to use TQT_DBusProxy,
* see TQT_DBusProxy::sendWithAsyncReply()
*
* @param message the message to send
* @param receiver the TQObject to relay the reply to
* @param slot the slot to invoke for the reply
*
* @return a numeric identifier for association with the reply or @c 0 if
* sending failed
*
* @see lastError()
*/
int sendWithAsyncReply(const TQT_DBusMessage &message, TQObject *receiver,
const char *slot) const;
/**
* @brief Flushes buffered outgoing message
*
* Attempts to send all enqueued outgoing messages before returning.
*/
void flush() const;
/**
* @brief Processes buffered inbound messages
*
* Attempts to process all enqueued inbound messages, e.g. replies to
* method calls or received signals.
*
* @warning dispatching message can result in TQt signals being emitted
* before this method returns. In case you just want to make sure
* no inbound message is forgotten, call scheduleDispatch() which
* will execute the dispatch delayed through the event loop.
*/
void dispatch() const;
/**
* @brief Request a delayed check for inbound buffer processing
*
* Similar to dispatch() but delayed by a single shot timer to ensure
* the method has returned before the processing is started.
*
* If a asynchronous method call is followed by a synchronous call without
* returning to the event loop in between, a call to scheduleDispatch()
* ensures that a pending reply to the asynchronous call is processed
* as soon as possible
*/
void scheduleDispatch() const;
/**
* @brief Connects an object to receive D-Bus signals
*
* This provides a basic access to all D-Bus signals received on this
* connection.
* For every D-Bus signal processed by the connection object a TQt signal
* is emitted and thus delivered to all receiver objects connected
* through this method.
*
* The required slot signature is
* @code
* void slotname(const TQT_DBusMessage&);
* @endcode
*
* so a suitable receiver could look like this
* @code
* class DBusSignalReceiver : public TQObject
* {
* Q_OBJECT
* TQ_OBJECT
* public slots:
* void dbusSignal(const TQT_DBusMessage&);
* };
* @endcode
*
* and would be connected like this
* @code
* // assuming the following variables
* TQT_DBusConnection connection;
* DBusSignalReceiver* receiver;
*
* connection.connect(receiver, TQT_SLOT(dbusSignal(const TQT_DBusMessage&)));
* @endcode
*
* See TQT_DBusProxy::dbusSignal() for a more obvious way of connecting slots.
*
* @param object the receiver object
* @param slot the receiver slot (or signal for signal->signal connections)
*
* @return @c true if the connection was successfull, otherwise @c false
*
* @see disconnect()
*/
bool connect(TQObject* object, const char* slot);
/**
* @brief Disconnects a given receiver from the D-Bus signal handling
*
* @param object the receiver object to disconnect from
* @param slot the receiver slot (or signal for signal->signal connections)
*
* @return @c true if the disconnect was successfull, otherwise @c false
*
* @see connect()
*/
bool disconnect(TQObject* object, const char* slot);
/**
* @brief Registers a service object for a given path
*
* In order to receive method calls over the D-Bus connection the service
* objects path within its host application has to be registered with the
* connection. See section @ref dbusconventions-objectpath for details.
*
* Only one objects can be registered for a single object path, i.e.
* the path -> object mapping is unambiguous, similar to mapping of
* filesystem paths to files.
*
* If a service object offers more than one interface it is up to the
* service implementation if all are implemented in the object path to this
* method or if the passed object is just another demultiplexer which
* relays the message to the interface implementor.
*
* @param path the object path to register the object for
* @param object the service implementation object for that path
*
* @return @c true if the given object is now registered for the given path
* or @c false if path is empty, object is null or another object
* is already registered for this path
*
* @see unregisterObject()
*/
bool registerObject(const TQString& path, TQT_DBusObjectBase* object);
/**
* @brief Unregister a service object on a given path
*
* Removes any mapping of object path to service object previously
* registered by registerObject().
* See section @ref dbusconventions-objectpath for details.
*
* @warning always(!) unregister a service object before deleting it
*
* @param path the object path of the object to unregister
*
* @see registerObject()
*/
void unregisterObject(const TQString &path);
/**
* @brief Gets a connection to the session bus
*
* Convenience overload for creating the default shared connection to the
* D-Bus session bus.
*
* Equivalent to calling addConnection(SessionBus);
*
* @return a connection handle. Check isConnected() to tqfind out if the
* connection attempt has been successfull
*
* @see addConnection(BusType,const TQString&);
*/
static TQT_DBusConnection sessionBus();
/**
* @brief Gets a connection to the system bus
*
* Convenience overload for creating the default shared connection to the
* D-Bus system bus.
*
* Equivalent to calling addConnection(SystemBus);
*
* @return a connection handle. Check isConnected() to tqfind out if the
* connection attempt has been successfull
*
* @see addConnection(BusType,const TQString&);
*/
static TQT_DBusConnection systemBus();
/**
* @brief Add a connection to a bus with a specific bus type
*
* This is a factory method as it will create a connection for the given
* name if its not available yet, but return a previously created
* connection for that name if available.
*
* Depending on the #BusType the D-Bus library will connect to the address
* configured for that type, so this is the recommended way to create
* connection to D-Bus.
*
* @code
* // Associate the default connection name with a connection to the user's
* // session bus
* TQT_DBusConnection con = TQT_DBusConnection::addConnection(TQT_DBusConnection::SessionBus);
*
* // check if we are connected and which uniqueName we got
* if (con.isConnected())
* {
* qDebug("Connected to session bus. We got uniqueName %s",
* con.uniqueName().local8Bit().data());
* }
* @endcode
* For the common use cases see also sessionBus() and systemBus()
*
* @param type the #BusType of the bus to connect to
* @param name the name to use for TQT_DBusConnection's connection sharing
*
* @return a connection handle. Check isConnected() to tqfind out if the
* connection attempt has been successfull
*
* @see closeConnection()
*/
static TQT_DBusConnection addConnection(BusType type,
const TQString &name = default_connection_name);
/**
* @brief Add a connection to a bus at a specific address
*
* This is a factory method as it will create a connection for the given
* name if its not available yet, but return a previously created
* connection for that name if available.
*
* @note this requires to know the address of a D-Bus daemon to connect to
*
* @param address the address of the D-Bus daemon. Usually a Unix domain
* socket address
* @param name the name to use for TQT_DBusConnection's connection sharing
*
* @return a connection handle. Check isConnected() to tqfind out if the
* connection attempt has been successfull
*
* @see closeConnection()
*/
static TQT_DBusConnection addConnection(const TQString &address,
const TQString &name = default_connection_name);
// TODO check why this doesn't close the D-Bus connection
/**
* @brief Closes a connection with a given name
*
* Removes the name from the pool of shared connections, i.e. a call to
* addConnection() with the same name afterwards will create a new
* connection.
*
* @param name the connection name as used in addConnection()
*/
static void closeConnection(const TQString &name = default_connection_name);
/**
* String used as the default parameter for connection names
*/
QT_STATIC_CONST char *default_connection_name;
private:
TQT_DBusConnectionPrivate *d;
};
#endif