Browse Source

Drop automake build support.

Add basic build instructions to the INSTALL file.
Remove empty files NEWS and TODO.
Remove "specs" folder as well as several shell scripts
(Deb, Fedora, Mandriva...)
Rework of the REAME file and the help page.

Signed-off-by: gregory guy <gregory-tde@laposte.net>
pull/4/head
gregory guy 2 years ago
parent
commit
6ca05fe5e8
No known key found for this signature in database GPG Key ID: 3BCCA0F7AB4536F4
  1. 3
      .gitmodules
  2. 177
      INSTALL
  3. 24
      Makefile.am
  4. 10
      Makefile.cvs
  5. 0
      NEWS
  6. 22
      README
  7. 0
      TODO
  8. 11834
      acinclude.m4
  9. 1
      admin
  10. 1561
      config.guess
  11. 244
      config.h.in
  12. 1686
      config.sub
  13. 2
      configure.files
  14. 126
      configure.in
  15. 8
      configure.in.in
  16. 6
      doc/Makefile.am
  17. 2
      doc/cs/Makefile.am
  18. 2
      doc/en/Makefile.am
  19. 57
      doc/en/index.docbook
  20. 9
      installDeb.sh
  21. 9
      installFedora.sh
  22. 9
      installMandriva.sh
  23. 13
      installMandriva4.sh
  24. 8
      pics/Makefile.am
  25. 3
      po/Makefile.am
  26. 6
      specs/Makefile.am
  27. 58
      specs/knutclient.spec.fedora.10
  28. 56
      specs/knutclient.spec.fedora.5
  29. 60
      specs/knutclient.spec.fedora.8
  30. 60
      specs/knutclient.spec.fedora.9
  31. 100
      specs/knutclient.spec.mandrake.10.1
  32. 111
      specs/knutclient.spec.mandriva.2006
  33. 124
      specs/knutclient.spec.mandriva.2009
  34. 41
      src/Makefile.am
  35. 0
      stamp-h.in

3
.gitmodules

@ -1,6 +1,3 @@
[submodule "admin"]
path = admin
url = https://system@scm.trinitydesktop.org/scm/git/tde-common-admin
[submodule "cmake"]
path = cmake
url = https://system@scm.trinitydesktop.org/scm/git/tde-common-cmake

177
INSTALL

@ -1,167 +1,16 @@
Basic Installation
==================
These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If at some point `config.cache'
contains results you don't want to keep, you may remove or edit it.
The file `configure.in' is used to create `configure' by a program
called `autoconf'. You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
Running `configure' takes a while. While running, it prints some
messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Type `make install' to install the programs and any data files and
documentation.
4. You can remove the program binaries and object files from the
source code directory by typing `make clean'.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. You can give `configure'
initial values for variables by setting them in the environment. Using
a Bourne-compatible shell, you can do that on the command line like
this:
CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
Or on systems that have the `env' program, you can do it like this:
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory. After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
architecture.
Installation Names
==================
By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc. You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on. Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
CPU-COMPANY-SYSTEM
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.
If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Operation Controls
==================
`configure' recognizes the following options to control how it
operates.
`--cache-file=FILE'
Use and save the results of the tests in FILE instead of
`./config.cache'. Set FILE to `/dev/null' to disable caching, for
debugging `configure'.
`--help'
Print a summary of the options to `configure', and exit.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made.
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--version'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`configure' also accepts some other, not widely useful, options.
Knutclient relies on cmake to build.
Here are suggested default options:
-DCMAKE_INSTALL_PREFIX="/opt/trinity" \
-DCONFIG_INSTALL_DIR="/etc/trinity" \
-DSYSCONF_INSTALL_DIR="/etc/trinity" \
-DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
-DCMAKE_BUILD_TYPE=RelWithDebInfo \
-DCMAKE_VERBOSE_MAKEFILE="ON" \
-DCMAKE_SKIP_RPATH="OFF" \
-DBUILD_ALL="ON" \
-DWITH_ALL_OPTIONS="ON"

24
Makefile.am

@ -1,24 +0,0 @@
SUBDIRS = $(TOPSUBDIRS)
$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
$(top_srcdir)/subdirs:
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
package-messages:
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common package-messages
$(MAKE) -C po merge
EXTRA_DIST = admin COPYING configure.in.in
dist-hook:
cd $(top_distdir) && perl admin/am_edit -padmin
cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
noinst_HEADERS = Makefile.cvs installDeb.sh installFedora.sh installMandriva.sh \
installMandriva4.sh

10
Makefile.cvs

@ -1,10 +0,0 @@
all:
@echo "This Makefile is only for the CVS repository"
@echo "This will be deleted before making the distribution"
@echo ""
$(MAKE) -f admin/Makefile.common cvs
dist:
$(MAKE) -f admin/Makefile.common dist
.SILENT:

0
NEWS

22
README

@ -1 +1,21 @@
Knutclient is GUI client for UPS system NUT.
Knutclient - a GUI client for UPS system NUT.
knutclient monitors UPS statistics through NUT and presents the
information in a nice visual format.
NUT: Network UPS Tools, http://www.networkupstools.org
CONTRIBUTING
==============
If you wish to contribute to knutclient (TDE), you might do so:
- TDE Gitea Workspace (TGW) collaboration tool.
https://mirror.git.trinitydesktop.org/gitea
- TDE Weblate Translation Workspace (TWTW) collaboration tool.
https://mirror.git.trinitydesktop.org/weblate

0
TODO

11834
acinclude.m4

File diff suppressed because it is too large

1
admin

@ -1 +0,0 @@
Subproject commit 68f23556e638353e46b444d3a4863a64936bd36a

1561
config.guess

File diff suppressed because it is too large

244
config.h.in

@ -1,244 +0,0 @@
/* config.h.in. Generated from configure.in by autoheader. */
/* Define to 1 if you have the <Carbon/Carbon.h> header file. */
#undef HAVE_CARBON_CARBON_H
/* Define if you have the CoreAudio API */
#undef HAVE_COREAUDIO
/* Define to 1 if you have the <crt_externs.h> header file. */
#undef HAVE_CRT_EXTERNS_H
/* Defines if your system has the crypt function */
#undef HAVE_CRYPT
/* Define to 1 if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H
/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
/* Define if you have libjpeg */
#undef HAVE_LIBJPEG
/* Define if you have libpng */
#undef HAVE_LIBPNG
/* Define if you have a working libpthread (will enable threaded code) */
#undef HAVE_LIBPTHREAD
/* Define if you have libz */
#undef HAVE_LIBZ
/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
/* Define if your system needs _NSGetEnviron to set up the environment */
#undef HAVE_NSGETENVIRON
/* Define if you have res_init */
#undef HAVE_RES_INIT
/* Define if you have the res_init prototype */
#undef HAVE_RES_INIT_PROTO
/* Define if you have a STL implementation by SGI */
#undef HAVE_SGI_STL
/* Define to 1 if you have the `snprintf' function. */
#undef HAVE_SNPRINTF
/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H
/* Define if you have strlcat */
#undef HAVE_STRLCAT
/* Define if you have the strlcat prototype */
#undef HAVE_STRLCAT_PROTO
/* Define if you have strlcpy */
#undef HAVE_STRLCPY
/* Define if you have the strlcpy prototype */
#undef HAVE_STRLCPY_PROTO
/* Define to 1 if you have the <sys/bitypes.h> header file. */
#undef HAVE_SYS_BITYPES_H
/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
/* Define to 1 if you have the `vsnprintf' function. */
#undef HAVE_VSNPRINTF
/* Suffix for lib directories */
#undef KDELIBSUFF
/* Define a safe value for MAXPATHLEN */
#undef KDEMAXPATHLEN
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* The size of `char *', as computed by sizeof. */
#undef SIZEOF_CHAR_P
/* The size of `int', as computed by sizeof. */
#undef SIZEOF_INT
/* The size of `long', as computed by sizeof. */
#undef SIZEOF_LONG
/* The size of `short', as computed by sizeof. */
#undef SIZEOF_SHORT
/* The size of `size_t', as computed by sizeof. */
#undef SIZEOF_SIZE_T
/* The size of `unsigned long', as computed by sizeof. */
#undef SIZEOF_UNSIGNED_LONG
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
/* Version number of package */
#undef VERSION
/* Defined if compiling without arts */
#undef WITHOUT_ARTS
/* Define to 1 if your processor stores words with the most significant byte
first (like Motorola and SPARC, unlike Intel and VAX). */
#undef WORDS_BIGENDIAN
/*
* jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system
* headers and I'm too lazy to write a configure test as long as only
* unixware is related
*/
#ifdef _UNIXWARE
#define HAVE_BOOLEAN
#endif
/*
* AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
* that defines bzero.
*/
#if defined(_AIX)
#include <strings.h>
#endif
#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H)
# include <sys/time.h>
# include <crt_externs.h>
# define environ (*_NSGetEnviron())
#endif
#if !defined(HAVE_RES_INIT_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
int res_init(void);
#ifdef __cplusplus
}
#endif
#endif
#if !defined(HAVE_STRLCAT_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
unsigned long strlcat(char*, const char*, unsigned long);
#ifdef __cplusplus
}
#endif
#endif
#if !defined(HAVE_STRLCPY_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
unsigned long strlcpy(char*, const char*, unsigned long);
#ifdef __cplusplus
}
#endif
#endif
/*
* On HP-UX, the declaration of vsnprintf() is needed every time !
*/
#if !defined(HAVE_VSNPRINTF) || defined(hpux)
#if __STDC__
#include <stdarg.h>
#include <stdlib.h>
#else
#include <varargs.h>
#endif
#ifdef __cplusplus
extern "C"
#endif
int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
#ifdef __cplusplus
extern "C"
#endif
int snprintf(char *str, size_t n, char const *fmt, ...);
#endif
#if defined(__SVR4) && !defined(__svr4__)
#define __svr4__ 1
#endif
/* type to use in place of socklen_t if not defined */
#undef kde_socklen_t
/* type to use in place of socklen_t if not defined (deprecated, use
kde_socklen_t) */
#undef ksize_t

1686
config.sub

File diff suppressed because it is too large

2
configure.files

@ -1,2 +0,0 @@
./admin/configure.in.min
configure.in.in

126
configure.in

@ -1,126 +0,0 @@
dnl =======================================================
dnl FILE: ./admin/configure.in.min
dnl =======================================================
dnl This file is part of the KDE libraries/packages
dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
dnl This file is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Library General Public
dnl License as published by the Free Software Foundation; either
dnl version 2 of the License, or (at your option) any later version.
dnl This library is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl Library General Public License for more details.
dnl You should have received a copy of the GNU Library General Public License
dnl along with this library; see the file COPYING.LIB. If not, write to
dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
dnl Boston, MA 02110-1301, USA.
# Original Author was Kalle@kde.org
# I lifted it in some mater. (Stephan Kulow)
# I used much code from Janos Farkas
dnl Process this file with autoconf to produce a configure script.
AC_INIT(acinclude.m4) dnl a source file from your sub dir
dnl This is so we can use kde-common
AC_CONFIG_AUX_DIR(admin)
dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
unset CDPATH
dnl Checking host/target/build systems, for make, install etc.
AC_CANONICAL_SYSTEM
dnl Perform program name transformation
AC_ARG_PROGRAM
dnl Automake doc recommends to do this only here. (Janos)
AM_INIT_AUTOMAKE(knutclient, 0.9.5) dnl searches for some needed programs
KDE_SET_PREFIX
dnl generate the config header
AM_CONFIG_HEADER(config.h) dnl at the distribution this done
dnl Checks for programs.
AC_CHECK_COMPILERS
AC_ENABLE_SHARED(yes)
AC_ENABLE_STATIC(no)
KDE_PROG_LIBTOOL
dnl for NLS support. Call them in this order!
dnl WITH_NLS is for the po files
AM_KDE_WITH_NLS
KDE_USE_TQT(3.2.0)
AC_PATH_KDE
dnl =======================================================
dnl FILE: configure.in.in
dnl =======================================================
#MIN_CONFIG(3.2.0)
dnl PACKAGE set before
AC_C_BIGENDIAN
AC_CHECK_KDEMAXPATHLEN
KDE_CREATE_SUBDIRSLIST
AC_CONFIG_FILES([ Makefile ])
AC_CONFIG_FILES([ doc/Makefile ])
AC_CONFIG_FILES([ doc/cs/Makefile ])
AC_CONFIG_FILES([ doc/en/Makefile ])
AC_CONFIG_FILES([ pics/Makefile ])
AC_CONFIG_FILES([ po/Makefile ])
AC_CONFIG_FILES([ specs/Makefile ])
AC_CONFIG_FILES([ src/Makefile ])
AC_OUTPUT
# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
# And if so, warn when they don't match
if test "$kde_libs_prefix" != "$given_prefix"; then
# And if kde doesn't know about the prefix yet
echo ":"`tde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
if test $? -ne 0; then
echo ""
echo "Warning: you chose to install this package in $given_prefix,"
echo "but KDE was found in $kde_libs_prefix."
echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix"
echo "Then restart KDE."
echo ""
fi
fi
fi
if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
echo ""
echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
echo "was not included. Therefore, GCC symbol visibility support remains disabled."
echo ""
echo "For better performance, consider including the Qt visibility supporting patch"
echo "located at:"
echo ""
echo "http://bugs.kde.org/show_bug.cgi?id=109386"
echo ""
echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
echo "everything will continue to work just fine without it."
echo ""
fi
if test "$all_tests" = "bad"; then
if test ! "$cache_file" = "/dev/null"; then
echo ""
echo "Please remove the file $cache_file after changing your setup"
echo "so that configure will find the changes next time."
echo ""
fi
else
echo ""
echo "Good - your configure finished. Start make now"
echo ""
fi

8
configure.in.in

@ -1,8 +0,0 @@
#MIN_CONFIG(3.2.0)
KDE_ENABLE_HIDDEN_VISIBILITY
AM_INIT_AUTOMAKE(knutclient, 0.9.5)
AC_C_BIGENDIAN
AC_CHECK_KDEMAXPATHLEN

6
doc/Makefile.am

@ -1,6 +0,0 @@
# the SUBDIRS is filled automatically by am_edit. If files are
# in this directory they are installed into the english dir
KDE_LANG = en
KDE_DOCS = knutclient
SUBDIRS = $(AUTODIRS)

2
doc/cs/Makefile.am

@ -1,2 +0,0 @@
KDE_DOCS = knutclient
KDE_LANG = cs

2
doc/en/Makefile.am

@ -1,2 +0,0 @@
KDE_DOCS = knutclient
KDE_LANG = en

57
doc/en/index.docbook

@ -37,14 +37,7 @@ as Authors, publish date, the abstract, and Keywords -->
<copyright>
<year>2001</year>
<year>2002</year>
<year>2003</year>
<year>2004</year>
<year>2006</year>
<year>2007</year>
<year>2008</year>
<year>2009</year>
<year>2001 - 2009</year>
<holder>Daniel Prynych</holder>
</copyright>
@ -90,7 +83,7 @@ This document describes &knutclient; version 0.9.5
<title>Introduction</title>
<para>
The &knutclient; is the application that watches state of UPS for system NUT.
The &knutclient; is a GUI application that watches the state of UPS for system NUT.
</para>
</chapter>
@ -106,9 +99,9 @@ The &knutclient; is the application that watches state of UPS for system NUT.
Main window applications &knutclient;
</para>
<para>
The &knutclient; is the client graphics application for system NUT
"Network Ups Tools". It enables to watch the state of UPS and to show
values of variables which the choice UPS a its driver are supporting.
The &knutclient; is the graphic client application for system NUT
"Network Ups Tools" for TDE. It watches the states of the UPS and displays
the values of the variables for which the UPS device can support.
</para>
<para>
@ -134,10 +127,13 @@ From version 0.9.0 &knutclient; doesn't support protocol UDP.
Main window is divided in two parts.
</para>
<para>
The left part "Main panel" includes next dates which show the state of the UPS choice.
On line, on battery, overload,replace battery,battery low, calibration,runtime.
There are unchangeable dates in this panel, name of UPS, serial number,
manufactured. This dates are reading only once, when you UPS choose.
The bottom of the Main panel displays the day dates.
The left part of that panel shows the state of the UPS (On line, On battery,
Overload, Battery low, etc).
Some parameters can't be changed in this panel, such as the name of the UPS
and its serial number. Those parameters are read only once (when you choose
the UPS).
</para>
<para>
The right part includes analog panels. These panels show values of variables like
@ -1235,24 +1231,15 @@ Translations done by:
<title>How to obtain KNutClient</title>
<para>
&knutclient; is not part of the KDE project
<ulink url="http://www.kde.org">http://www.kde.org</ulink>.
&knutclient; can be found on
<ulink
url="ftp://ftp.buzuluk.cz/pub/alo/knutclient/">ftp://ftp.buzuluk.cz/pub/alo/knutclient/</ulink>, the
main ftp site of the A.L.O. </para>
The source code is available at <ulink url="https://mirror.git.trinitydesktop.org/gitea/TDE/knutclient">https://mirror.git.trinitydesktop.org/gitea/TDE/knutclient</ulink> .
</para>
</sect1>
<sect1 id="requirements">
<title>Requirements</title>
<para>
In order to successfully use &knutclient;, you need KDE 3.x
</para>
<para>
You can find a list of changes at <ulink
url="http://www.knut.noveradsl.cz/knutclient/">http://www.knut.noveradsl.cz/knutclient/</ulink>.
In order to successfully use &knutclient;, you will need the TDE libraries (tdelibs)
</para>
</sect1>
@ -1260,19 +1247,21 @@ url="http://www.knut.noveradsl.cz/knutclient/">http://www.knut.noveradsl.cz/knut
<title>Compilation and installation</title>
<para>
In order to compile and install &knutclient; on your system, type the following
in the base
directory of.
In order to compile and install &knutclient; on your system, you will need cmake.
<screen width="40">
<prompt>%</prompt> <userinput>./configure</userinput>
<prompt>%</prompt> <userinput>make</userinput>
<prompt>%</prompt> <userinput>mkdir -p build</userinput>
<prompt>%</prompt> <userinput>cd build</userinput>
<prompt>%</prompt> <userinput>cmake ..</userinput>
<prompt>%</prompt> <userinput>make install</userinput>
</screen>
For further instructions, please, read the INSTALL file.
</para>
<para>Since KApp uses autoconf and automake you should have not trouble
compiling it.
Should you run into problems please report them to the KDE mailing lists.</para>
Should you run into problems please report them to the TDE mailing lists.</para>
</sect1>
</appendix>

9
installDeb.sh

@ -1,9 +0,0 @@
#!/bin/sh
make -f Makefile.cvs
[ ! -f Makefile ] || make clean
export kde_htmldir=/usr/share/doc/tde/HTML
./configure --prefix=/usr
make
make install

9
installFedora.sh

@ -1,9 +0,0 @@
#!/bin/sh
make -f Makefile.cvs
[ ! -f Makefile ] || make clean
export kde_htmldir=/usr/share/doc/tde/HTML
./configure --prefix=/usr
make
make install

9
installMandriva.sh

@ -1,9 +0,0 @@
#!/bin/sh
make -f Makefile.cvs
[ ! -f Makefile ] || make clean
export kde_htmldir=/usr/share/doc/tde/HTML
./configure --prefix=/usr
make
make install

13
installMandriva4.sh

@ -1,13 +0,0 @@
#!/bin/sh
make -f Makefile.cvs
[ ! -f Makefile ] || make clean
export kde_htmldir=/opt/trinity/usr/share/doc/tde/HTML
export TDEDIRS=/usr:/opt/trinity
sh ./configure --prefix=/opt/trinity
make
make install
mv /opt/trinity/share/applnk/Utilities/knutclient.desktop /opt/trinity/share/applications/tde/

8
pics/Makefile.am

@ -1,8 +0,0 @@
METASOURCES = AUTO
kncpicsdir = $(kde_datadir)/knutclient/pics
kncpics_HEADERS = knc_conn.png knc_error.png knc_main.png knc_ups.png \
knc_batt.png knc_mpref.png knc_panel.png knc_mset.png knc_upses.png knc_analog.png \
knc_dock.png

3
po/Makefile.am

@ -1,3 +0,0 @@
POFILES = AUTO
noinst_HEADERS = cs.po de.po es.po fr.po it.po knutclient.pot pt_BR.po \
ru.po uk.po pl.po

6
specs/Makefile.am

@ -1,6 +0,0 @@
METASOURCES = AUTO
kncdatadir = specs
noinst_HEADERS = knutclient.spec.fedora.10 knutclient.spec.fedora.5 \
knutclient.spec.fedora.8 knutclient.spec.fedora.9 knutclient.spec.mandrake.10.1 \
knutclient.spec.mandriva.2006 knutclient.spec.mandriva.2009

58
specs/knutclient.spec.fedora.10

@ -1,58 +0,0 @@
Summary: NUT GUI Interface
Name: knutclient
Version: 0.9.5
Release: 1
License: GPL
Vendor: Daniel Prynych <Daniel@prynych.cz>
Url: http://www.knut.noveradsl.cz/knutclient
Packager: Daniel Prynych <Daniel@prynych.cz>
Group: Applications/System
Prefix: /usr
Source: knutclient-0.9.5.tar.gz
BuildRoot: %{_tmppath}/build-root-%{name}
%description
Knutclient is a GUI interface for UPS system NUT
%prep
%setup
make -f Makefile.cvs
CFLAGS="$RPM_OPT_FLAGS" CXXFLAGS="$RPM_OPT_FLAGS" ./configure --prefix=%{prefix} $LOCALFLAGS
%build
# Setup for parallel builds
numprocs=`egrep -c ^cpu[0-9]+ /proc/stat || :`
if [ "$numprocs" = "0" ]; then
numprocs=1
fi
make -j$numprocs
%install
export QA_RPATHS=$[ 0x0001|0x0010 ]
make install-strip DESTDIR=$RPM_BUILD_ROOT
cd $RPM_BUILD_ROOT
#mkdir -p usr/share/applications/
#cp -a usr/share/applnk/Applications/knutclient.desktop usr/share/applications/
#rm -rf usr/share/applnk
# as defattr point to root,root this will not work
#chown desktop.desktop kde-knutclient.desktop
cd $RPM_BUILD_ROOT
find . -type d | sed '1,2d;s,^\.,\%attr(-\,root\,root) \%dir ,' > $RPM_BUILD_DIR/file.list.%{name}
find . -type f | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.%{name}
find . -type l | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.%{name}
%clean
rm -rf $RPM_BUILD_ROOT/*
rm -rf $RPM_BUILD_DIR/%{name}
rm -rf ../file.list.%{name}
%files -f ../file.list.%{name}
%defattr(-,root,root,0755)

56
specs/knutclient.spec.fedora.5

@ -1,56 +0,0 @@
Summary: NUT GUI Interface
Name: knutclient
Version: 0.9.5
Release: 1
License: GPL
Vendor: Daniel Prynych <Daniel.Prynych@alo.cz>
Url: http://www.knut.noveradsl.cz/knutclient
Packager: Daniel Prynych <Daniel.Prynych@alo.cz>
Group: Applications/System
Prefix: /usr
Source: knutclient-0.9.5.tar.gz
BuildRoot: %{_tmppath}/build-root-%{name}
%description
Knutclient is a GUI interface for UPS system NUT
%prep
%setup
CFLAGS="$RPM_OPT_FLAGS" CXXFLAGS="$RPM_OPT_FLAGS" ./configure --prefix=%{prefix} $LOCALFLAGS
%build
# Setup for parallel builds
numprocs=`egrep -c ^cpu[0-9]+ /proc/stat || :`
if [ "$numprocs" = "0" ]; then
numprocs=1
fi
make -j$numprocs
%install
make install-strip DESTDIR=$RPM_BUILD_ROOT
cd $RPM_BUILD_ROOT
#mkdir -p usr/share/applications/
#cp -a usr/share/applnk/Applications/knutclient.desktop usr/share/applications/
#rm -rf usr/share/applnk
# as defattr point to root,root this will not work
#chown desktop.desktop kde-knutclient.desktop
cd $RPM_BUILD_ROOT
find . -type d | sed '1,2d;s,^\.,\%attr(-\,root\,root) \%dir ,' > $RPM_BUILD_DIR/file.list.%{name}
find . -type f | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.%{name}
find . -type l | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.%{name}
%clean
rm -rf $RPM_BUILD_ROOT/*
rm -rf $RPM_BUILD_DIR/%{name}
rm -rf ../file.list.%{name}
%files -f ../file.list.%{name}
%defattr(-,root,root,0755)

60
specs/knutclient.spec.fedora.8

@ -1,60 +0,0 @@
Summary: NUT GUI Interface
Name: knutclient
Version: 0.9.5
Release: 1
License: GNU GPL
Vendor: Daniel Prynych <Daniel@prynych.cz>
Url: http://www.knut.noveradsl.cz/knutclient
Packager: Daniel Prynych <Daniel@prynych.cz>
Group: Applications/System
Prefix: /usr
Source: knutclient-0.9.5.tar.gz
BuildRoot: %{_tmppath}/build-root-%{name}
%description
Knutclient is a GUI interface for UPS system NUT
%prep
%setup
make -f Makefile.cvs
CFLAGS="$RPM_OPT_FLAGS" CXXFLAGS="$RPM_OPT_FLAGS" ./configure --prefix=%{prefix} $LOCALFLAGS
%build
# Setup for parallel builds
numprocs=`egrep -c ^cpu[0-9]+ /proc/stat || :`
if [ "$numprocs" = "0" ]; then
numprocs=1
fi
make -j$numprocs
%install
make install-strip DESTDIR=$RPM_BUILD_ROOT
cd $RPM_BUILD_ROOT
#mkdir -p var/lib/menu/kde/Applications/Extras/Accessories/
#mkdir -p usr/share/applications/
#cp -a usr/share/applnk/Utilities/knutclient.desktop usr/share/applications/
#rm -rf usr/share/applnk
#cd var/lib/menu/kde/Applications/Extras/Accessories/
#ln -s /usr/share/applications/knutclient.desktop kde-knutclient.desktop
# as defattr point to root,root this will not work
#chown desktop.desktop kde-knutclient.desktop
cd $RPM_BUILD_ROOT
find . -type d | sed '1,2d;s,^\.,\%attr(-\,root\,root) \%dir ,' > $RPM_BUILD_DIR/file.list.%{name}
find . -type f | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.%{name}
find . -type l | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.%{name}
%clean
rm -rf $RPM_BUILD_ROOT/*
rm -rf $RPM_BUILD_DIR/%{name}
rm -rf ../file.list.%{name}
%files -f ../file.list.%{name}
%defattr(-,root,root,0755)

60
specs/knutclient.spec.fedora.9

@ -1,60 +0,0 @@
Summary: NUT GUI Interface
Name: knutclient
Version: 0.9.5
Release: 1
License: GNU GPL
Vendor: Daniel Prynych <Daniel@prynych.cz>
Url: http://www.knut.noveradsl.cz/knutclient
Packager: Daniel Prynych <Daniel@prynych.cz>
Group: Applications/System
Prefix: /usr
Source: knutclient-0.9.5.tar.gz
BuildRoot: %{_tmppath}/build-root-%{name}
%description
Knutclient is a GUI interface for UPS system NUT
%prep
%setup
make -f Makefile.cvs
CFLAGS="$RPM_OPT_FLAGS" CXXFLAGS="$RPM_OPT_FLAGS" ./configure --prefix=%{prefix} $LOCALFLAGS
%build
# Setup for parallel builds
numprocs=`egrep -c ^cpu[0-9]+ /proc/stat || :`
if [ "$numprocs" = "0" ]; then
numprocs=1
fi
make -j$numprocs
%install
make install-strip DESTDIR=$RPM_BUILD_ROOT
cd $RPM_BUILD_ROOT
#mkdir -p var/lib/menu/kde/Applications/Extras/Accessories/
#mkdir -p usr/share/applications/
#cp -a usr/share/applnk/Utilities/knutclient.desktop usr/share/applications/
#rm -rf usr/share/applnk
#cd var/lib/menu/kde/Applications/Extras/Accessories/
#ln -s /usr/share/applications/knutclient.desktop kde-knutclient.desktop
# as defattr point to root,root this will not work
#chown desktop.desktop kde-knutclient.desktop
cd $RPM_BUILD_ROOT
find . -type d | sed '1,2d;s,^\.,\%attr(-\,root\,root) \%dir ,' > $RPM_BUILD_DIR/file.list.%{name}
find . -type f | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.%{name}
find . -type l | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.%{name}
%clean
rm -rf $RPM_BUILD_ROOT/*
rm -rf $RPM_BUILD_DIR/%{name}
rm -rf ../file.list.%{name}
%files -f ../file.list.%{name}
%defattr(-,root,root,0755)

100
specs/knutclient.spec.mandrake.10.1

@ -1,100 +0,0 @@
Summary: NUT GUI Interface
Name: knutclient
Version: 0.9.5
Release: 1
License: GPL
Url: http://www.alo.cz/knutclient
Group: Monitoring
Source0: ftp://ftp.buzuluk.cz/pub/alo/knutclient/stable/%{name}-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot
%description
Knutclient is a GUI interface for UPS system NUT
%prep
%setup
sh admin/cvs.sh cvs
%build
CFLAGS="$RPM_OPT_FLAGS" \
CXXFLAGS="$RPM_OPT_FLAGS" \
./configure --prefix=%{_prefix} \
--libdir=%{_libdir} \
--enable-mt \
--disable-rpath
%make
%install
make install-strip DESTDIR=%buildroot
install -d %buildroot/%_menudir
cat > %buildroot/%_menudir/%{name} <<EOF
?package(%{name}):\
command="/usr/bin/knutclient"\
title="KNutClient"\
icon="knutclient.png"\
longtitle="A GUI interface for UPS system NUT"\
needs="X11"\
section="Applications/Monitoring"
EOF
%find_lang %{name}
%clean
rm -rf %{buildroot}
%post
%{update_menus}
%postun
%{clean_menus}
%files -f %name.lang
%defattr(-,root,root)
%doc README AUTHORS ChangeLog INSTALL TODO COPYING
%{_bindir}/knutclient
%{_menudir}/%{name}
%{_datadir}/applnk/Utilities/knutclient.desktop
%dir %{_datadir}/apps/knutclient
%{_datadir}/apps/knutclient/knutclientui.rc
%{_docdir}/HTML/*/knutclient
%{_iconsdir}/??color/??x??/apps/knutclient.png
%{_iconsdir}/??color/??x??/apps/knutclienterr.png
%{_iconsdir}/??color/??x??/apps/knutclientconn.png
%dir %{_datadir}/apps/knutclient/pics/knc_conn.png
%dir %{_datadir}/apps/knutclient/pics/knc_error.png
%dir %{_datadir}/apps/knutclient/pics/knc_main.png
%changelog
* Fri Dec 19 2003 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.7.4-1mdk
- New release
* Mon Nov 10 2003 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.7.3-3mdk
- Correction changelog
* Mon Nov 10 2003 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.7.3-2mdk
- Correction Buildrequires
* Fri Nov 07 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 0.7.3-1mdk
- new release
* Fri Jul 25 2003 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.6.3-1mdk
- New release
* Fri Jul 18 2003 Laurent MONTEL <lmontel@mandrakesoft.com> 0.6.0-3mdk
- Rebuild
* Wed Apr 30 2003 Lenny Cartier <lenny@mandrakesoft.com> 0.6.0-2mdk
- buildrequires
* Wed Jan 08 2003 Lenny Cartier <lenny@mandrakesoft.com> 0.6.0-1mdk
- 0.6.0
* Tue Aug 27 2002 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.5.0-2mdk
- New release
* Mon Aug 19 2002 Laurent Culioli <laurent@pschit.net> 0.4.1-4mdk
- rebuild with gcc3.2
* Sat Jul 27 2002 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.4.1-3mdk
- Mandrake adaptions
- Creation of patch for qt3 detection in configure
- Creation of french po file

111
specs/knutclient.spec.mandriva.2006

@ -1,111 +0,0 @@
Summary: NUT GUI Interface
Name: knutclient
Version: 0.9.5
Release: 1
License: GPL
Url: http://www.knut.noveradsl.cz/knutclient
Group: Monitoring
Source0: ftp://ftp.buzuluk.cz/pub/alo/knutclient/stable/%{name}-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot
%description
Knutclient is a GUI interface for UPS system NUT
%prep
%setup
sh admin/cvs.sh cvs
%build
CFLAGS="$RPM_OPT_FLAGS" \
CXXFLAGS="$RPM_OPT_FLAGS" \
kde_htmldir=/usr/share/doc/tde/HTML \
./configure --prefix=%{_prefix} \
--libdir=%{_libdir} \
--enable-mt \
--disable-rpath
%make
%install
make install-strip DESTDIR=%buildroot
install -d %buildroot/%_menudir
cat > %buildroot/%_menudir/%{name} <<EOF
?package(%{name}):\
command="/usr/bin/knutclient"\
title="KNutClient"\
icon="knutclient.png"\
longtitle="A GUI interface for UPS system NUT"\
needs="X11"\
section="Applications/Monitoring"
EOF
%find_lang %{name}
%clean
rm -rf %{buildroot}
%post
%{update_menus}
%postun
%{clean_menus}
%files -f %name.lang
%defattr(-,root,root)
%doc README AUTHORS ChangeLog INSTALL TODO COPYING
%{_bindir}/knutclient
%{_menudir}/%{name}
%{_datadir}/applnk/Utilities/knutclient.desktop
%dir %{_datadir}/apps/knutclient
%{_datadir}/apps/knutclient/knutclientui.rc
%{_docdir}/HTML/*/knutclient
%{_docdir}/kde/HTML/*/knutclient
%{_iconsdir}/??color/??x??/apps/knutclient.png
%{_iconsdir}/??color/??x??/apps/knutclienterr.png
%{_iconsdir}/??color/??x??/apps/knutclientconn.png
%dir %{_datadir}/apps/knutclient/pics/knc_conn.png
%dir %{_datadir}/apps/knutclient/pics/knc_error.png
%dir %{_datadir}/apps/knutclient/pics/knc_main.png
%dir %{_datadir}/apps/knutclient/pics/knc_analog.png
%dir %{_datadir}/apps/knutclient/pics/knc_batt.png
%dir %{_datadir}/apps/knutclient/pics/knc_dock.png
%dir %{_datadir}/apps/knutclient/pics/knc_mpref.png
%dir %{_datadir}/apps/knutclient/pics/knc_mset.png
%dir %{_datadir}/apps/knutclient/pics/knc_panel.png
%dir %{_datadir}/apps/knutclient/pics/knc_ups.png
%dir %{_datadir}/apps/knutclient/pics/knc_upses.png
%changelog
* Fri Dec 19 2003 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.7.4-1mdk
- New release
* Mon Nov 10 2003 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.7.3-3mdk
- Correction changelog
* Mon Nov 10 2003 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.7.3-2mdk
- Correction Buildrequires
* Fri Nov 07 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 0.7.3-1mdk
- new release
* Fri Jul 25 2003 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.6.3-1mdk
- New release
* Fri Jul 18 2003 Laurent MONTEL <lmontel@mandrakesoft.com> 0.6.0-3mdk
- Rebuild
* Wed Apr 30 2003 Lenny Cartier <lenny@mandrakesoft.com> 0.6.0-2mdk
- buildrequires
* Wed Jan 08 2003 Lenny Cartier <lenny@mandrakesoft.com> 0.6.0-1mdk
- 0.6.0
* Tue Aug 27 2002 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.5.0-2mdk
- New release
* Mon Aug 19 2002 Laurent Culioli <laurent@pschit.net> 0.4.1-4mdk
- rebuild with gcc3.2
* Sat Jul 27 2002 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.4.1-3mdk
- Mandrake adaptions
- Creation of patch for qt3 detection in configure
- Creation of french po file

124
specs/knutclient.spec.mandriva.2009

@ -1,124 +0,0 @@
Summary: NUT GUI Interface
Name: knutclient
Version: 0.9.5
Release: 1
License: GPL
Url: http://www.knut.noveradsl.cz/knutclient
Group: Monitoring
Source0: ftp://ftp.buzuluk.cz/pub/alo/knutclient/stable/%{name}-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot
%description
Knutclient is a GUI interface for UPS system NUT
%prep
%setup
sh admin/cvs.sh cvs
%build
CFLAGS="$RPM_OPT_FLAGS" \
CXXFLAGS="$RPM_OPT_FLAGS" \
export kde_htmldir=/opt/trinity/share/doc/tde/HTML \
export TDEDIRS=/usr:/opt/trinity
./configure --prefix=/opt/trinity \
--libdir=%{_libdir} \
--enable-mt \
--disable-rpath
%make
%install
make install-strip DESTDIR=%buildroot
install -d %buildroot/%_menudir
cat > %buildroot/%_menudir/%{name} <<EOF
?package(%{name}):\
command="/opt/trinity/bin/knutclient"\
title="KNutClient"\
icon="knutclient.png"\
longtitle="A GUI interface for UPS system NUT"\
needs="X11"\
section="Applications/Monitoring"
EOF
mkdir -p %buildroot/opt/trinity/share/applications/tde/
mv %buildroot/opt/trinity/share/applnk/Utilities/knutclient.desktop %buildroot/opt/trinity/share/applications/tde/
rmdir %buildroot/opt/trinity/share/applnk/Utilities
rm %buildroot/opt/trinity/share/applications/tde/Utilities/knutclient.desktop
rmdir %buildroot/opt/trinity/share/applications/tde/Utilities
%find_lang %{name}
%clean
rm -rf %{buildroot}
%post
%{update_menus}
%postun
%{clean_menus}
%files -f %name.lang
%defattr(-,root,root)
%doc README AUTHORS ChangeLog INSTALL TODO COPYING
/opt/trinity/bin/knutclient
%{_menudir}/%{name}
/opt/trinity/share/applications/tde/knutclient.desktop
%dir /opt/trinity/share/apps/knutclient
/opt/trinity/share/apps/knutclient/knutclientui.rc
/opt/trinity/share/doc/tde/HTML/*/knutclient
/opt/trinity/share/icons/??color/??x??/apps/knutclient.png
/opt/trinity/share/icons/??color/??x??/apps/knutclienterr.png
/opt/trinity/share/icons/??color/??x??/apps/knutclientconn.png
/opt/trinity/share/apps/knutclient/pics/knc_conn.png
/opt/trinity/share/apps/knutclient/pics/knc_error.png
/opt/trinity/share/apps/knutclient/pics/knc_main.png
/opt/trinity/share/apps/knutclient/pics/knc_analog.png
/opt/trinity/share/apps/knutclient/pics/knc_batt.png
/opt/trinity/share/apps/knutclient/pics/knc_dock.png
/opt/trinity/share/apps/knutclient/pics/knc_mpref.png
/opt/trinity/share/apps/knutclient/pics/knc_mset.png
/opt/trinity/share/apps/knutclient/pics/knc_panel.png
/opt/trinity/share/apps/knutclient/pics/knc_ups.png
/opt/trinity/share/apps/knutclient/pics/knc_upses.png
%changelog
* Sat Mar 21 2009 Daniel Prynych <Daniel@prynych.cz> 0.9.5-1
- changed part files
* Fri Dec 19 2003 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.7.4-1mdk
- New release
* Mon Nov 10 2003 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.7.3-3mdk
- Correction changelog
* Mon Nov 10 2003 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.7.3-2mdk
- Correction Buildrequires
* Fri Nov 07 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 0.7.3-1mdk
- new release
* Fri Jul 25 2003 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.6.3-1mdk
- New release
* Fri Jul 18 2003 Laurent MONTEL <lmontel@mandrakesoft.com> 0.6.0-3mdk
- Rebuild
* Wed Apr 30 2003 Lenny Cartier <lenny@mandrakesoft.com> 0.6.0-2mdk
- buildrequires
* Wed Jan 08 2003 Lenny Cartier <lenny@mandrakesoft.com> 0.6.0-1mdk
- 0.6.0
* Tue Aug 27 2002 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.5.0-2mdk
- New release
* Mon Aug 19 2002 Laurent Culioli <laurent@pschit.net> 0.4.1-4mdk
- rebuild with gcc3.2
* Sat Jul 27 2002 Arnaud de Lorbeau <adelorbeau@mandrakesoft.com> 0.4.1-3mdk
- Mandrake adaptions
- Creation of patch for qt3 detection in configure
- Creation of french po file

41
src/Makefile.am

@ -1,41 +0,0 @@
# set the include path for X, qt and KDE
INCLUDES = $(all_includes)
# these are the headers for your project
noinst_HEADERS = knutclient.h knutmainwindow.h knutprefdlg.h knutnewupsdlg.h \
knutupsdata.h knutvardata.h knutnet.h knutfrontpanel.h knutpanelmeter.h knutdock.h \
knutprintupsvar.h knutinstcomms.h knutrwvar.h knutanalog.h knutmessagemanager.h \
knutmessage.h
# let automoc handle all of the meta source files (moc)
METASOURCES = AUTO
messages: rc.cpp
$(EXTRACTRC) `find . -name \*.ui -o -name \*.rc` > rc.cpp
$(XGETTEXT) *.cpp -o $(podir)/knutclient.pot
KDE_ICON = AUTO
#########################################################################
# APPLICATION SECTION
#########################################################################
# this is the program that gets installed. it's name is used for all
# of the other Makefile.am variables
bin_PROGRAMS = knutclient
# the application source, library search path, and link libraries
knutclient_SOURCES = main.cpp knutclient.cpp knutmainwindow.cpp knutprefdlg.cpp \
knutnewupsdlg.cpp knutupsdata.cpp knutvardata.cpp knutnet.cpp knutfrontpanel.cpp \
knutpanelmeter.cpp knutdock.cpp knutprintupsvar.cpp knutinstcomms.cpp knutrwvar.cpp \
knutanalog.cpp knutmessagemanager.cpp knutmessage.cpp
knutclient_LDFLAGS = $(all_libraries) $(KDE_RPATH) $(LIB_TQT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor
knutclient_LDADD = $(LIB_TDEUI)
# this is where the desktop file will go
shelldesktopdir = $(kde_appsdir)/Utilities
shelldesktop_DATA = knutclient.desktop
# this is where the shell's XML-GUI resource file goes
shellrcdir = $(kde_datadir)/knutclient
shellrc_DATA = knutclientui.rc

0
stamp-h.in

Loading…
Cancel
Save