You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
knutclient/doc/en/index.docbook

1289 lines
34 KiB

<?xml version="1.0" ?>
<!DOCTYPE book PUBLIC "-//KDE//DTD DocBook XML V4.1-Based Variant V1.0//EN"
"dtd/kdex.dtd" [
<!ENTITY knutclient '<application>KNutClient</application>'>
<!ENTITY kappname "&knutclient;"><!-- replace knutclient here -->
<!ENTITY % addindex "IGNORE">
<!ENTITY % English "INCLUDE"><!-- change language only here -->
<!-- Do not define any other entities; instead, use the entities
from kde-genent.entities and $LANG/user.entities. -->
]>
<!-- kdoctemplate v0.8 October 1 1999
Minor update to "Credits and Licenses" section on August 24, 2000
Removed "Revision history" section on 22 January 2001 -->
<!-- ................................................................ -->
<!-- The language must NOT be changed here. -->
<book lang="&language;">
<!-- This header contains all of the meta-information for the document such
as Authors, publish date, the abstract, and Keywords -->
<bookinfo>
<title>The KNutClient Handbook</title>
<authorgroup>
<author>
<firstname>Daniel</firstname>
<othername></othername>
<surname>Prynych</surname>
<affiliation>
<address><email>Daniel@prynych.cz</email></address>
</affiliation>
</author>
</authorgroup>
<copyright>
<year>2001</year>
<year>2002</year>
<year>2003</year>
<year>2004</year>
<year>2006</year>
<year>2007</year>
<year>2008</year>
<year>2009</year>
<holder>Daniel Prynych</holder>
</copyright>
<!-- Translators: put here the copyright notice of the translation -->
<!-- Put here the FDL notice. Read the explanation in fdl-notice.docbook
and in the FDL itself on how to use it. -->
<legalnotice>&FDLNotice;</legalnotice>
<!-- Date and version information of the documentation
Don't forget to include this last date and this last revision number, we
need them for translation coordination !
Please respect the format of the date (DD/MM/YYYY) and of the version
(V.MM.LL), it could be used by automation scripts.
Do NOT change these in the translation. -->
<date>15/01/2008</date>
<releaseinfo>0.12.01</releaseinfo>
<!-- Abstract about this handbook -->
<abstract>
<para>
&knutclient; is GUI client for UPS system NUT.
</para>
<para>
This document describes &knutclient; version 0.9.5
</para>
</abstract>
<keywordset>
<keyword>KDE</keyword>
<keyword>tdeutils</keyword>
<keyword>KNutClient</keyword>
<keyword>NUT</keyword>
<keyword>UPS</keyword>
</keywordset>
</bookinfo>
<chapter id="introduction">
<title>Introduction</title>
<para>
The &knutclient; is the application that watches state of UPS for system NUT.
</para>
</chapter>
<chapter id="using-knutclient">
<title>Using KNutClient</title>
<sect1 id="knutclient-mainwin">
<title>Main window &knutclient;</title>
<para>
Main window applications &knutclient;
</para>
<para>
The &knutclient; is the client graphics application for system NUT
"Network Ups Tools". It enables to watch the state of UPS and to show
values of variables which the choice UPS a its driver are supporting.
</para>
<para>
From version 0.6.0 &knutclient; supports the running of instant command and
enables the change of RW variables.
</para>
<para>
From version 0.9.0 &knutclient; doesn't support protocol UDP.
</para>
<para>
<screenshot>
<screeninfo>Main window &knutclient;</screeninfo>
<mediaobject>
<imageobject>
<imagedata fileref="knutclient-en.png" format="PNG"/>
</imageobject>
</mediaobject>
</screenshot>
</para>
<para>
Main window is divided in two parts.
</para>
<para>
The left part "Main panel" includes next dates which show the state of the UPS choice.
On line, on battery, overload,replace battery,battery low, calibration,runtime.
There are unchangeable dates in this panel, name of UPS, serial number,
manufactured. This dates are reading only once, when you UPS choose.
</para>
<para>
The right part includes analog panels. These panels show values of variables like
input voltage, load UPS, battery charge, UPS temperature, battery voltage.
</para>
<para>
&knutclient; includes toolbar, with standard buttons and button for the UPS choice.
</para>
</sect1>
<sect1 id="knutclient-kicker">
<title>&knutclient; and KDE panel</title>
<para>
<screenshot>
<screeninfo>&knutclient; and KDE panel</screeninfo>
<mediaobject>
<imageobject>
<imagedata fileref="tkicker-en.png" format="PNG"/>
</imageobject>
</mediaobject>
</screenshot>
</para>
<para>
From 0.8.0 version &knutclient; docks in KDE panel. His icon is variable and shows
information about UPS load, runtime and the charge of battery, depending on type of icons is selected.
After moving the pointer of the mouse on the icon, information window "ToolTip" is showes up,
which includes more information about UPS, Name, UPS name ,Address, State, Runtime ..
</para>
</sect1>
<sect1 id="knutclient-features">
<title>More KNutClient features</title>
<para>
For connecting with server side of NUT (upsd), &knutclient; uses protocol TCP.
When UPS is selected in toolbar, &knutclient; tries to read the data. When
reading fails, reading is repeated. The maximum count of repetitions is five.
Afterwards &knutclient; reads data in periodical sequences. The first reading
reads all variables, next reading reads variables that analog panels,
RUNTIME a state of UPS show only. Variables show UPS name, manufacturer, serial
number ... are read only once, because their changes aren't probable.
</para>
<para>
Errors which arise like answer from user actions are show in their own window.
</para>
</sect1>
</chapter>
<chapter id="commands">
<title>Command Reference</title>
<sect1 id="knutclient-mainwindow">
<title>The main KNutClient window</title>
<para></para>
<sect2>
<title>The File Menu</title>
<para>
<variablelist>
<varlistentry>
<term><menuchoice>
<guimenu>File</guimenu>
<guimenuitem>Showing Ups variables and commands</guimenuitem>
</menuchoice></term>
<listitem><para><action>Shows Ups variables for selected Ups
</action></para></listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenu>File</guimenu>
<guimenuitem>Running instant command</guimenuitem>
</menuchoice></term>
<listitem><para><action>Runs selected instant command for selected UPS</action></para></listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenu>File</guimenu>
<guimenuitem>Setting RW variables</guimenuitem>
</menuchoice></term>
<listitem>
<para><action> Changes selected UPS RW variable</action></para>
</listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<shortcut>
<keycombo><keycap>Ctrl</keycap><keycap>q</keycap></keycombo>
</shortcut>
<guimenu>File</guimenu>
<guimenuitem>Quit</guimenuitem>
</menuchoice></term>
<listitem><para><action>Quits program</action></para></listitem>
</varlistentry>
</variablelist>
</para>
</sect2>
<sect2>
<title>Menu Connection</title>
<para>
<variablelist>
<varlistentry>
<term><menuchoice>
<shortcut>
<keycombo><keycap>F1</keycap></keycombo>
</shortcut>
<guimenu>Connection</guimenu>
<guimenuitem>Reconnect</guimenuitem>
</menuchoice></term>
<listitem><para><action>Restore connection (reconnect) to UPS server(upsd).
</action></para></listitem>
</varlistentry>
</variablelist>
</para>
</sect2>
<sect2>
<title>Menu Settings</title>
<para>
<variablelist>
<varlistentry>
<term><menuchoice>
<guimenu>Settings</guimenu>
<guimenuitem>Show Toolbar</guimenuitem>
</menuchoice></term>
<listitem><para><action>Shows/Hides toolbar.</action></para></listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenu>Settings</guimenu>
<guimenuitem>Show Statusbar</guimenuitem>
</menuchoice></term>
<listitem><para><action>Shows/Hides statusbar.</action></para></listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenu>Settings</guimenu>
<guimenuitem>Configure Shortcuts... </guimenuitem>
</menuchoice></term>
<listitem>
<para><action>Opens dialog panels for configuration key/action associations.
</action></para>
</listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenu>Settings</guimenu>
<guimenuitem>Configure &knutclient; </guimenuitem>
</menuchoice></term>
<listitem>
<para><action>Opens main configuration dialog panels.
</action></para>
</listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenu>Settings</guimenu>
<guimenuitem>Using description</guimenuitem>
</menuchoice></term>
<listitem>
<para><action>Shows/Hides tooltip for showing UPS variables and commands.
</action></para>
</listitem>
</varlistentry>
</variablelist>
</para>
</sect2>
</sect1>
<sect1 id="knutclient-kicker-comm">
<title>Icon in KDE panel</title>
<para>
<screenshot>
<screeninfo>Menu of KDE panel's icon</screeninfo>
<mediaobject>
<imageobject>
<imagedata fileref="mkicker-cs.png" format="PNG"/>
</imageobject>
</mediaobject>
</screenshot>
</para>
<sect2>
<title>Menu</title>
<para>
<variablelist>
<varlistentry>
<term><menuchoice>
<guimenuitem>UPS</guimenuitem>
</menuchoice></term>
<listitem><para><action>Using for select Ups.</action></para></listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenuitem>Showing Ups variables and commands</guimenuitem>
</menuchoice></term>
<listitem><para><action>Shows Ups variables for selected Ups.
</action></para></listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenuitem>Running instant command</guimenuitem>
</menuchoice></term>
<listitem><para><action>Runs selected instant command for selected UPS.</action></para></listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenuitem>Setting RW variables</guimenuitem>
</menuchoice></term>
<listitem>
<para><action> Changes selected UPS RW variable.</action></para>
</listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenuitem>Reconnect</guimenuitem>
</menuchoice></term>
<listitem><para><action>Restore connection (reconnect) to UPS server(upsd).
</action></para></listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenuitem>Setting &knutclient; </guimenuitem>
</menuchoice></term>
<listitem>
<para><action>Opens configuration dialog panels.
</action></para>
</listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenuitem>About &knutclient;</guimenuitem>
</menuchoice></term>
<listitem>
<para><action>Shows information about aplication &knutclient;.</action></para></listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenuitem>Minimalize</guimenuitem>
</menuchoice></term>
<listitem>
<para><action>Closes main window.</action></para></listitem>
</varlistentry>
<varlistentry>
<term><menuchoice>
<guimenuitem>Quit</guimenuitem>
</menuchoice></term>
<listitem><para><action>Quits program.</action></para></listitem>
</varlistentry>
</variablelist>
</para>
</sect2>
</sect1>
<sect1 id="knuclient-show-variables">
<title>Showing variables</title>
<para>
This window shows list of all variables and instant commands, when exist for selected UPS.
<screenshot>
<screeninfo>Window of variables and instant commands</screeninfo>
<mediaobject>
<imageobject>
<imagedata fileref="variables-cs.png" format="PNG"/>
</imageobject>
</mediaobject>
</screenshot>
</para>
</sect1>
<sect1 id="knuclient-instant-command">
<title>Instant commands</title>
<para>
Instant commands run in UPS, the NUT server puts the command selected driver and
driver will run the command in UPS. The control window offers commands, which
the driver supports.
</para>
<para>
<variablelist>
<varlistentry>
<term><guilabel>OK</guilabel></term>
<listitem>
<para>The button <guibutton>OK</guibutton> runs the selected commands.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Cancel</guilabel></term>
<listitem>
<para>The Button <guibutton>Cancel</guibutton> closes the window.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Command</guilabel></term>
<listitem>
<para>The command for running is selected here.</para>
</listitem>
</varlistentry>
</variablelist>
</para>
</sect1>
<sect1 id="knutclient-RW-values">
<title>User changed (RW) variables</title>
<para>
User changed variables are group of variables which can be changed by the user.
Majority of them are equal to setting of UPS. There are two types of user
changed variables, char or enumerated variables. Char variables are a string of
chars with maximal length. Enumerated variables are a list of right values
for setting these variables.
</para>
<para>
User changed variable is not changed on server NUT (upsd) but the server
puts command for change to driver, it changes the setting immediately. This
activity is not instant and it can wait a few seconds.
</para>
<para>
<variablelist>
<varlistentry>
<term><guilabel>OK</guilabel></term>
<listitem>
<para>Button<guibutton>OK</guibutton> changes variable.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Cancel</guilabel></term>
<listitem>
<para>Button <guibutton>Cancel</guibutton> close window.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Default</guilabel></term>
<listitem>
<para>Button <guibutton>Default</guibutton> sets default values
this variable.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Variable</guilabel></term>
<listitem>
<para>Variable for changed is selected here.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Value</guilabel></term>
<listitem>
<para> Values for selected variable are selected here.
Array for changed of value is changes on base type of variable.
</para>
</listitem>
</varlistentry>
</variablelist>
</para>
</sect1>
<sect1 id="knutclient-configuration">
<title>Setting &knutclient;</title>
<para>
The window for setting has got five parts Setting, UPS, Panel, Fonts and Analog.
</para>
<sect2>
<title>Setting</title>
<para>
Part Setting is used for setting number of rows, analog panels, background color of the main window,
input voltage (120/230)V, frequency of input voltage (50/60)Hz and allowing of Xfer's values (LowXfer and HighXfer)
</para>
<para>
<screenshot>
<screeninfo>&knutclient; </screeninfo>
<mediaobject>
<imageobject>
<imagedata fileref="msetting-en.png" format="PNG" />
</imageobject>
</mediaobject>
</screenshot>
</para>
<para>
<variablelist>
<varlistentry>
<term><guilabel>Number of columns</guilabel></term>
<listitem>
<para>This sets the maximum number of columns for analog panels</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Use custom background color</guilabel></term>
<listitem>
<para>This allows to use the custom background color of the main window.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Color of Background</guilabel></term>
<listitem>
<para>This selects the background color.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Use dialog "Are you sure"</guilabel></term>
<listitem>
<para>
This switches on dialog "Are you sure" when you want to end the program.
When you don't acknowledge dialog "Are you sure", program doesn't stop.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Use Main window when program started</guilabel></term>
<listitem>
<para>Sets showing main window, when program started.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Show message window, when program reports error</guilabel></term>
<listitem>
<para>Permits showing message window, what shows description of error. It's useful when docking of program isn't forbided.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Nominal Input Voltage</guilabel></term>
<listitem>
<para> This selects nominal input voltage from 230V or 120V. The selection isn't
useless of <guilabel>"Use High-Low XFER"</guilabel> is switched on.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Nominal Input Frequency</guilabel></term>
<listitem>
<para> This selects nominal input frequency from 50Hz or 60Hz. The selection isn't
useless of<guilabel>"Use High-Low XFER"</guilabel> is switched on.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Use High-Low XFER</guilabel></term>
<listitem>
<para>This sets nominal input voltage and nominal input frequency on based values in variables of NUT LOWXFER and HIGHXFER.
These variables determine the range of value input voltage, which UPS can work with.
On the basis of thise values &knutclient; sets input voltage and input frequency for analog panels which use them.
These panels are input voltage, input frequency and etc.
</para>
</listitem>
</varlistentry>
</variablelist>
</para>
</sect2>
<sect2>
<title>UPS</title>
<para>
The part UPS is used for setting the list of UPS and their parameters
The left part includes list of UPS. The right part includes buttons for
adding, changed parameters and deleting the record of UPS.
</para>
<para>
<screenshot>
<screeninfo>&knutclient; </screeninfo>
<mediaobject>
<imageobject>
<imagedata fileref="usetting-en.png" format="PNG" />
</imageobject>
</mediaobject>
</screenshot>
</para>
<para>
<variablelist>
<varlistentry>
<term><guibutton>Add</guibutton></term>
<listitem>
<para>This adds into the list another UPS and sets its parameters.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guibutton>Change</guibutton></term>
<listitem>
<para>This changes parametric selected UPS.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guibutton>Delete</guibutton></term>
<listitem><para>This deletes UPS from list.</para>
</listitem>
</varlistentry>
</variablelist>
</para>
<sect3>
<title>Setting of parameters</title>
<para>
This windows is used for setting parameters of UPS.
</para>
<para>
<screenshot>
<mediaobject>
<imageobject>
<imagedata fileref="new-en.png" format="PNG"/>
</imageobject>
</mediaobject>
</screenshot>
</para>
<para>
<variablelist>
<varlistentry>
<term><guilabel>Name</guilabel></term>
<listitem>
<para>This sets the name of UPS for the &knutclient; program.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>UPS address</guilabel></term>
<listitem>
<para>
This sets name of PC. UPS is connected with this PC.
This name is UPS address on net.
Examples: ns.alo.cz, localhost, 192.168.1.12.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>UPS name</guilabel></term>
<listitem>
<para>
This sets name of UPS as it is defined in NUT. When name is not defined
program uses the first name of NUT system list on this PC.
This is true when minimal version of upsd is 1.3. Look into NUT documentacion.
Examples: victron, myups, apc700.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Delay (ms)</guilabel></term>
<listitem>
<para>
This sets the interval between two transmitions of data (reading data) from the NUT system.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Password</guilabel></term>
<listitem>
<para>This sets the password for the authorization of the user.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Store NUT password in configuration file</guilabel></term>
<listitem>
<para>
When you select this selection, the password will be saved into the configuration file.
Password saved in configuration file not crypt. When you don't select this selection,
the password will be forgotten, when the program is ended.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>UPS Variables</guilabel></term>
<listitem>
<para>This selects variables which will show in analog panels
in the right part main window.
</para>
</listitem>
</varlistentry>
</variablelist>
</para>
<para>
Parameters User Name and Password are used for instant command or change of RW variables only.
For watching the state of UPS the User name and the Password aren't needed.
The Password and The User name have got their equivalents in file upsd.users of the NUT system.
</para>
</sect3>
</sect2>
<sect2>
<title>Panel</title>
<para>
The part Panel is used for selecting which information's parts of the main panel will show.
</para>
<para>
<screenshot>
<screeninfo>&knutclient; </screeninfo>
<mediaobject>
<imageobject>
<imagedata fileref="psetting-en.png" format="PNG" />
</imageobject>
</mediaobject>
</screenshot>
</para>
<para>
<variablelist>
<varlistentry>
<term><guilabel>Overloading</guilabel></term>
<listitem>
<para>
Shows/Hides showing overloading
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>UPS Battery low</guilabel></term>
<listitem>
<para>
Shows/Hides showing battery low.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Replace battery</guilabel></term>
<listitem>
<para>
Shows/Hides showing that battery needs to be replaced
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Ups calibration</guilabel></term>
<listitem>
<para>
Shows/Hides showing UPS calibration.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Manufac. + Model</guilabel></term>
<listitem>
<para>
Shows/Hides showing Manufacturer and Model of UPS
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Manufacturer</guilabel></term>
<listitem>
<para>
Shows/Hides showing Manufacturer of UPS.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Model</guilabel></term>
<listitem>
<para>
Shows/Hides showing Model of UPS.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Serial</guilabel></term>
<listitem>
<para>
Shows/Hides showing serial number.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Firm. rev.</guilabel></term>
<listitem>
<para>
Shows/Hides showing firmware's revision.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Runtime</guilabel></term>
<listitem>
<para>
Shows/Hides show the time of the runtime on battery without power.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Use custom background color</guilabel></term>
<listitem>
<para>This allows to use the custom background color of the main panel.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Color of background</guilabel></term>
<listitem>
<para>This selects the background color.</para>
</listitem>
</varlistentry>
</variablelist>
</para>
</sect2>
<sect2>
<title>Fonts</title>
<para>
The part Fonts is used for selecting used fonts.
</para>
<para>
<screenshot>
<screeninfo>&knutclient; </screeninfo>
<mediaobject>
<imageobject>
<imagedata fileref="fsetting-en.png" format="PNG" />
</imageobject>
</mediaobject>
</screenshot>
</para>
<para>
<variablelist>
<varlistentry>
<term><guilabel>Use custom font</guilabel></term>
<listitem>
<para>
Shows/Hides allows to select custom fonts for the main panel and the analog panels.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Main panel / Analog panels</guilabel></term>
<listitem>
<para>This selects the panel for which the font is selected.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Font</guilabel></term>
<listitem>
<para>This selects the font for the selection panel.
This is used when select <guilabel>Use custom font</guilabel> is selected.
</para>
</listitem>
</varlistentry>
</variablelist>
</para>
</sect2>
<sect2>
<title>Analog</title>
<para>
The part Analog is used for setting color for the analog panels.
</para>
<para>
<screenshot>
<screeninfo>&knutclient; </screeninfo>
<mediaobject>
<imageobject>
<imagedata fileref="asetting-en.png" format="PNG" />
</imageobject>
</mediaobject>
</screenshot>
</para>
<para>
<variablelist>
<varlistentry>
<term><guilabel>Use custom background color</guilabel></term>
<listitem>
<para>This allows to use custom background color for the analog panel.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Color of background</guilabel></term>
<listitem>
<para>This selects the background color of analog panel.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Use custom other colors</guilabel></term>
<listitem>
<para>This allows to select custom color of the analog panel's other parts.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Color of pointer</guilabel></term>
<listitem>
<para>
This is used for selecting the color of analog panel's pointer (finger). Default color is black.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Color of OK range</guilabel></term>
<listitem>
<para>
This is used for selecting color of range OK for analog panel. Default color is green.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Color of warning range</guilabel></term>
<listitem>
<para>
This is used for selecting color of range warning for analog panel. Default color is yellow.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Color of error range</guilabel></term>
<listitem>
<para>
This is used for selecting color of range error for analog panel. Default color is red.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Color of scale</guilabel></term>
<listitem>
<para>
This is used for selecting color of scale for analog panel. Default color is black.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Color of font</guilabel></term>
<listitem>
<para>
This is used for selecting color of font for analog panel. Default color is black.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Digital processing of pointers</guilabel></term>
<listitem>
<para>
This is used for selecting type of graphics proccessing of pointers.
</para>
</listitem>
</varlistentry>
</variablelist>
</para>
</sect2>
<sect2>
<title>Docking</title>
<para>
The part DOCK is used for setting parameters of docking program.
</para>
<para>
<screenshot>
<screeninfo>&knutclient; </screeninfo>
<mediaobject>
<imageobject>
<imagedata fileref="ksetting-cs.png" format="PNG" />
</imageobject>
</mediaobject>
</screenshot>
</para>
<para>
Type of dock's showing (Dock is KDE panel).
</para>
<para>
<variablelist>
<varlistentry>
<term><guilabel>Picture</guilabel></term>
<listitem>
<para>
Sets picture type of icon.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>General</guilabel></term>
<listitem>
<para>
Sets general type of icon, for specialist only.
</para>
</listitem>
</varlistentry>
</variablelist>
</para>
<para>
Items of ToolTip. (ToolTip is bubble help.)
</para>
<para>
<variablelist>
<varlistentry>
<term><guilabel>Manufacturer</guilabel></term>
<listitem>
<para>
Shows/Hides showing Manufacturer of UPS.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Model</guilabel></term>
<listitem>
<para>
Shows/Hides showing Model of UPS.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Serial</guilabel></term>
<listitem>
<para>
Shows/Hides showing serial number.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Firm. rev.</guilabel></term>
<listitem>
<para>
Shows/Hides showing firmware's revision.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Runtime</guilabel></term>
<listitem>
<para>
Shows/Hides showing the time of the runtime on battery without power.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Battery Charge</guilabel></term>
<listitem>
<para>
Shows/Hides showing the Battery Charge.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Load UPS</guilabel></term>
<listitem>
<para>
Shows/Hides showing the Load of UPS.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Use custom background color</guilabel></term>
<listitem>
<para>This allows to use the custom background color of KDE panel's icon, when type of icon in KDE panel is picture.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Color of background</guilabel></term>
<listitem>
<para>This selects the background color.</para>
</listitem>
</varlistentry>
</variablelist>
</para>
</sect2>
</sect1>
</chapter>
<chapter id="faq">
<title>Questions and Answers</title>
&reporting.bugs;
&updating.documentation;
<qandaset id="faqlist">
<qandaentry>
<question>
<para>
The &knutclient; isn't working, but the upsc is. What shall I do ?
</para>
</question>
<answer>
<para>
See the setting number of port. From version 0.5 (NUT) the number of port is changed.
</para>
</answer>
</qandaentry>
</qandaset>
</chapter>
<chapter id="credits">
<title>Credits and License</title>
<para>
&knutclient;
</para>
<para>
Program copyright 2002, 2003, 2004, 2005, 2006, 2007, 2008 Daniel Prynych <email>Daniel@prynych.cz</email>
</para>
<para>
Documentation copyright 2003, 2004, 2005, 2006, 2007, 2008 Daniel Prynych <email>Daniel@prynych.cz</email>
</para>
<para>
Translations done by:
<itemizedlist>
<listitem>
<para>Daniel Prynych <email>Daniel@prynych.cz</email> Eng</para>
</listitem>
</itemizedlist>
</para>
&underFDL; <!-- FDL: do not remove -->
&underGPL; <!-- GPL License -->
</chapter>
<appendix id="installation">
<title>Installation</title>
<sect1 id="getting-knutclient">
<title>How to obtain KNutClient</title>
<para>
&knutclient; is not part of the KDE project
<ulink url="http://www.kde.org">http://www.kde.org</ulink>.
&knutclient; can be found on
<ulink
url="ftp://ftp.buzuluk.cz/pub/alo/knutclient/">ftp://ftp.buzuluk.cz/pub/alo/knutclient/</ulink>, the
main ftp site of the A.L.O. </para>
</sect1>
<sect1 id="requirements">
<title>Requirements</title>
<para>
In order to successfully use &knutclient;, you need KDE 3.x
</para>
<para>
You can find a list of changes at <ulink
url="http://www.knut.noveradsl.cz/knutclient/">http://www.knut.noveradsl.cz/knutclient/</ulink>.
</para>
</sect1>
<sect1 id="compilation">
<title>Compilation and installation</title>
<para>
In order to compile and install &knutclient; on your system, type the following
in the base
directory of.
<screen width="40">
<prompt>%</prompt> <userinput>./configure</userinput>
<prompt>%</prompt> <userinput>make</userinput>
<prompt>%</prompt> <userinput>make install</userinput>
</screen>
</para>
<para>Since KApp uses autoconf and automake you should have not trouble
compiling it.
Should you run into problems please report them to the KDE mailing lists.</para>
</sect1>
</appendix>
&documentation.index;
</book>
<!--
Local Variables:
mode: sgml
sgml-minimize-attributes: nil
sgml-general-insert-case: lower
End:
-->