You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
kpilot/po/tr.po

6641 lines
170 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# translation of kpilot.po to Türkçe
# translation of kpilot.po to
# translation of kpilot.po to Turkish
# Copyright (C) 2003,2004 Free Software Foundation, Inc
# Görkem Çetin <gorkem@kde.org>, 2002,2003.
# Engin ÇAĞATAY <engincagatay@yahoo.com>, 2004.
# Serdar Soytetir <tulliana@gmail.com>, 2008.
msgid ""
msgstr ""
"Project-Id-Version: kpilot\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2021-05-29 18:31+0000\n"
"PO-Revision-Date: 2008-02-28 23:55+0200\n"
"Last-Translator: Serdar Soytetir <tulliana@gmail.com>\n"
"Language-Team: Turkish <kde-i18n-doc@lists.kde.org>\n"
"Language: tr\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: LoKalize 0.2\n"
"Plural-Forms: nplurals=1; plural=0;\n"
#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Serdar Soytetir"
#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "tulliana@gmail.com"
#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:50
#: conduits/malconduit/mal-factory.cpp:70
msgid "MAL Synchronization Conduit for KPilot"
msgstr "KPilot için MAL Senkronizasyon Kanalı"
#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:52
#: conduits/malconduit/mal-factory.cpp:72
msgid "Synchronizes the content from MAL Servers like AvantGo to the Handheld"
msgstr ""
#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:56
#: conduits/abbrowserconduit/abbrowser-setup.cpp:54
#: conduits/knotes/knotes-factory.cpp:73 conduits/malconduit/mal-factory.cpp:76
#: conduits/memofileconduit/memofile-factory.cpp:69
#: conduits/notepadconduit/notepad-factory.cpp:73
#: conduits/null/null-factory.cpp:71 conduits/recordconduit/factory.cpp:72
#: conduits/sysinfoconduit/sysinfo-setup.cpp:101
#: conduits/timeconduit/time-setup.cpp:54
msgid "Primary Author"
msgstr "Asıl Yazar"
#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:58
#: conduits/malconduit/mal-factory.cpp:78
msgid "Author of libmal and the JPilot AvantGo conduit"
msgstr "libmal ve JPilot AvantGo bağlantısının yazarı"
#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:60
#: conduits/malconduit/mal-factory.cpp:80
msgid "Author of syncmal"
msgstr ""
#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:62
#: conduits/malconduit/mal-factory.cpp:82
msgid "Authors of the malsync library (c) 1997-1999"
msgstr "Malsync kitaplığının yazarları (c) 1997-1999"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:125
#: conduits/abbrowserconduit/abbrowser-setup.cpp:71
msgid "Addressbook"
msgstr "Adres Defteri"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:291
#: conduits/vcalconduit/vcal-conduitbase.cpp:298
msgid ""
"You chose to sync with the file \"%1\", which cannot be opened. Please make "
"sure to supply a valid file name in the conduit's configuration dialog. "
"Aborting the conduit."
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:327
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:328
msgid "Unable to initialize and load the addressbook for the sync."
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:340
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:341
msgid "Unable to lock addressbook for writing. Can't sync!"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:396
msgid ""
"An error occurred while uploading \"%1\". You can try to upload the "
"temporary local file \"%2\" manually"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:518
msgid "Unable to open the addressbook databases on the handheld."
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:539
msgid "Unable to open the addressbook."
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1526
msgid "Item on PC"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1527
#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:308
msgid "Handheld"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1528
msgid "Last sync"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1549
msgid "Last name"
msgstr "Soyadı"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1550
msgid "First name"
msgstr "İlk Ad"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1551
msgid "Organization"
msgstr "Kurum"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1552
msgid "Title"
msgstr "Ünvanı"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1553
msgid "Note"
msgstr "Not"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1555
msgid "Custom 1"
msgstr "Özel 1"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1556
msgid "Custom 2"
msgstr "Özel 2"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1557
msgid "Custom 3"
msgstr "Özel 3"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1558
msgid "Custom 4"
msgstr "Özel 4"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1560
msgid "Work Phone"
msgstr "İş Telefonu"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1561
msgid "Home Phone"
msgstr "Ev Telefonu"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1562
msgid "Mobile Phone"
msgstr "Cep Telefonu"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1563
msgid "Fax"
msgstr "Faks"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1564
msgid "Pager"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1565
msgid "Other"
msgstr "Diğer"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1566
msgid "Email"
msgstr "E-posta"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1569
msgid "Address"
msgstr "Adres"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1570
msgid "City"
msgstr "Şehir"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1571
msgid "Region"
msgstr "Bölge"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1572
msgid "Postal code"
msgstr "Posta kodu"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1573
msgid "Country"
msgstr "Ülke"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1587 kpilot/listCat.cpp:84
msgid "Category"
msgstr "Kategori"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1752
msgid ""
"The following address entry was changed, but does no longer exist on the "
"handheld. Please resolve this conflict:"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1756
msgid ""
"The following address entry was changed, but does no longer exist on the PC. "
"Please resolve this conflict:"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1760
msgid ""
"The following address entry was changed on the handheld as well as on the PC "
"side. The changes could not be merged automatically, so please resolve the "
"conflict yourself:"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1762
msgid "Address conflict"
msgstr "Adres çakışması"
#: conduits/abbrowserconduit/abbrowser-setup.cpp:48
msgid "Abbrowser Conduit for KPilot"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-setup.cpp:50
msgid "Configures the Abbrowser Conduit for KPilot"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-setup.cpp:56
#: conduits/abbrowserconduit/abbrowser-setup.cpp:59
#: conduits/docconduit/doc-factory.cpp:68 conduits/popmail/setupDialog.cpp:74
#: conduits/vcalconduit/todo-setup.cpp:59
#: conduits/vcalconduit/todo-setup.cpp:63
#: conduits/vcalconduit/vcal-setup.cpp:50
#: conduits/vcalconduit/vcal-setup.cpp:54 kpilot/kpilot.cpp:1027
#: kpilot/pilotDaemon.cpp:1323
msgid "Maintainer"
msgstr "Yönetici"
#: conduits/abbrowserconduit/abbrowser-setup.cpp:61
#: conduits/knotes/knotes-factory.cpp:77
msgid "UI"
msgstr "UI"
#: conduits/abbrowserconduit/resolutionDialog.cpp:162
msgid ""
"_: Entries in the resolution dialog. First the name of the field, then the "
"entry from the Handheld or PC after the colon\n"
"%1: %2"
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog.cpp:164
msgid ""
"_: Denoting newlines in Address entries. No need to translate\n"
" | "
msgstr " | "
#: conduits/abbrowserconduit/resolutionDialog.cpp:214
#: conduits/abbrowserconduit/resolutionDialog.cpp:220
msgid "Delete entry"
msgstr "Girdiyi silGirdiyi Sil"
#: conduits/docconduit/DOC-converter.cpp:198
msgid "Unable to open text file %1 for reading."
msgstr ""
#: conduits/docconduit/DOC-converter.cpp:383
msgid "Unable to open Database for writing"
msgstr ""
#: conduits/docconduit/DOC-converter.cpp:440
#, c-format
msgid "Unable to open palm doc database %1"
msgstr ""
#: conduits/docconduit/DOC-converter.cpp:510
msgid "No filename set for the conversion"
msgstr ""
#: conduits/docconduit/DOC-converter.cpp:515
msgid "Unable to open Database for reading"
msgstr "Veritabanı okumak için açılamadı"
#: conduits/docconduit/DOC-converter.cpp:523
#, c-format
msgid "Unable to read database header for database %1."
msgstr ""
#: conduits/docconduit/DOC-converter.cpp:543
#, c-format
msgid "Unable to open output file %1."
msgstr ""
#: conduits/docconduit/DOC-converter.cpp:558
msgid "Could not read text record #%1 from Database %2"
msgstr ""
#: conduits/docconduit/DOC-converter.cpp:577
msgid "Could not read bookmark record #%1 from Database %2"
msgstr ""
#: conduits/docconduit/DOC-converter.cpp:594
msgid "Unable to open file %1 for the bookmarks of %2."
msgstr ""
#: conduits/docconduit/doc-conduit.cpp:84
msgid "DOC"
msgstr ""
#: conduits/docconduit/doc-conduit.cpp:272
msgid "Searching for texts and databases to synchronize"
msgstr ""
#: conduits/docconduit/doc-conduit.cpp:332
msgid "Database created."
msgstr "Veritabanı oluşturuldu."
#: conduits/docconduit/doc-conduit.cpp:380
msgid "Unable to install the locally created PalmDOC %1 to the handheld."
msgstr ""
#: conduits/docconduit/doc-conduit.cpp:383
msgid "Conversion of PalmDOC \"%1\" failed."
msgstr ""
#: conduits/docconduit/doc-conduit.cpp:391
#, c-format
msgid "Unable to open or create the database %1."
msgstr "%1 veritabanıılamadı ya da oluşturulamadı."
#: conduits/abbrowserconduit/kaddressbookConduit.ui:147
#: conduits/docconduit/doc-conduit.cpp:625
#: conduits/docconduit/doc-setupdialog.ui:401
#, no-c-format
msgid "Conflict Resolution"
msgstr ""
#: conduits/docconduit/doc-conduit.cpp:630
msgid "Sync aborted by user."
msgstr ""
#: conduits/docconduit/doc-conduit.cpp:668
msgid "Synchronizing text \"%1\""
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cpp:53
msgid ""
"Here is a list of all text files and DOC databases the conduit found. The "
"conduit tried to determine the correct sync direction, but for databases in "
"bold red letters a conflict occurred (i.e. the text was changed both on the "
"desktop and on the handheld). For these databases please specify which "
"version is the current one."
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cpp:57
msgid ""
"You can also change the sync direction for databases without a conflict."
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cpp:61
msgid "DOC Databases"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cpp:106
msgid "No Sync"
msgstr "Senkronizasyon Yok"
#: conduits/docconduit/doc-conflictdialog.cpp:107
msgid "Sync Handheld to PC"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cpp:108
msgid "Sync PC to Handheld"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cpp:109
msgid "Delete Both Databases"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cpp:113
msgid "More Info..."
msgstr "Daha Fazla Bilgi..."
#: conduits/docconduit/doc-conflictdialog.cpp:155
msgid "unchanged"
msgstr "değiştirilmemiş"
#: conduits/docconduit/doc-conflictdialog.cpp:156
msgid "new"
msgstr "yeni"
#: conduits/docconduit/doc-conflictdialog.cpp:157
msgid "changed"
msgstr "değiştirilmiş"
#: conduits/docconduit/doc-conflictdialog.cpp:158
msgid "only bookmarks changed"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cpp:159
msgid "deleted"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cpp:160
msgid "does not exist"
msgstr "mevcut değil"
#: conduits/docconduit/doc-conflictdialog.cpp:161
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:207
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:404
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:405
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:406
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:407
msgid "unknown"
msgstr "bilinmeyen"
#: conduits/docconduit/doc-conflictdialog.cpp:171
msgid ""
"Status of the database %1:\n"
"\n"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cpp:172
msgid "Handheld: %1\n"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cpp:173
msgid "Desktop: %1\n"
msgstr "Masaüstü: %1\n"
#: conduits/docconduit/doc-conflictdialog.cpp:175
msgid "Database information"
msgstr "Veritabanı bilgisi"
#: conduits/docconduit/doc-conflictdialog.h:60
msgid "Resolution Dialog"
msgstr ""
#: conduits/docconduit/doc-factory.cpp:63
msgid "Palm DOC Conduit for KPilot"
msgstr ""
#: conduits/docconduit/doc-factory.cpp:64
msgid "Configures the DOC Conduit for KPilot"
msgstr ""
#: conduits/docconduit/doc-setup.cpp:64
msgid "Palm DOC"
msgstr "Palm DOC"
#: conduits/docconduit/kpalmdoc.cpp:42
msgid "KPalmDOC"
msgstr "KPalmDOC"
#: conduits/docconduit/kpalmdoc.cpp:45
msgid "Main Developer"
msgstr "Ana Geliştirici"
#: conduits/docconduit/kpalmdoc.cpp:47
msgid "Maintainer of KPilot"
msgstr "KPilot Yazarı"
#: conduits/docconduit/kpalmdoc.cpp:54
msgid "PalmDOC Converter"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cpp:178
#: conduits/docconduit/kpalmdoc_dlg.cpp:214
#: conduits/docconduit/kpalmdoc_dlg.cpp:327
#: conduits/docconduit/kpalmdoc_dlg.cpp:352
msgid ""
"<qt>You selected to sync folders, but gave a filename instead (<em>%1</em>)."
"<br>Use folder <em>%2</em> instead?</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cpp:181
#: conduits/docconduit/kpalmdoc_dlg.cpp:217
#: conduits/docconduit/kpalmdoc_dlg.cpp:330
#: conduits/docconduit/kpalmdoc_dlg.cpp:356
msgid "Use Folder"
msgstr "Dizini Kullan"
#: conduits/docconduit/kpalmdoc_dlg.cpp:194
msgid ""
"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
"folder.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cpp:203
msgid ""
"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
"directory.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cpp:231
msgid ""
"<qt>The folder <em>%1</em> for the text files could not be created.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cpp:254
#: conduits/docconduit/kpalmdoc_dlg.cpp:392
msgid "The following texts were successfully converted:"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cpp:255
#: conduits/docconduit/kpalmdoc_dlg.cpp:393
msgid "Conversion Successful"
msgstr "Çevrim Başarılı"
#: conduits/docconduit/kpalmdoc_dlg.cpp:259
#: conduits/docconduit/kpalmdoc_dlg.cpp:397
msgid "No text files were converted correctly"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cpp:269
#: conduits/docconduit/kpalmdoc_dlg.cpp:407
msgid "<qt>The file <em>%1</em> does not exist.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cpp:285
#: conduits/docconduit/kpalmdoc_dlg.cpp:415
msgid "Conversion of file %1 successful."
msgstr "%1 dosyasının çevrimi başarılı."
#: conduits/docconduit/kpalmdoc_dlg.cpp:342
msgid ""
"<qt>The folder <em>%1</em> for the text files is not a valid folder.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cpp:369
msgid ""
"<qt>The folder <em>%1</em> for the PalmDOC files could not be created.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cpp:437
msgid "&Text folder:"
msgstr "&Metin dizini:"
#: conduits/docconduit/kpalmdoc_dlg.cpp:438
msgid "&PalmDOC folder:"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cpp:442
#: conduits/docconduit/kpalmdoc_dlgbase.ui:66
#, no-c-format
msgid "&Text file:"
msgstr "&Metin dosyası:"
#: conduits/docconduit/kpalmdoc_dlg.cpp:443
msgid "&DOC file:"
msgstr "&DOC dosyası:"
#: conduits/docconduit/kpalmdoc_dlg.cpp:458
msgid "<qt>The database file <em>%1</em> already exists. Overwrite it?</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cpp:459
#: conduits/docconduit/kpalmdoc_dlg.cpp:504 kpilot/addressWidget.cpp:698
#: kpilot/logWidget.cpp:343
msgid "Overwrite"
msgstr "Üzerine Yaz"
#: conduits/docconduit/kpalmdoc_dlg.cpp:484
#: conduits/docconduit/kpalmdoc_dlg.cpp:520
msgid "<qt>Error while converting the text %1.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cpp:503
msgid "<qt>The text file <em>%1</em> already exists. Overwrite it?</qt>"
msgstr ""
#: conduits/knotes/knotes-action.cpp:232
msgid "Could not open MemoDB on the handheld."
msgstr ""
#: conduits/knotes/knotes-action.cpp:272
#, c-format
msgid "Could not load the resource at: %1"
msgstr "Buradaki kaynak yüklenemedi: %1"
#: conduits/knotes/knotes-action.cpp:808
#, c-format
msgid ""
"_n: Added one new memo.\n"
"Added %n new memos."
msgstr ""
#: conduits/knotes/knotes-action.cpp:814
#, c-format
msgid ""
"_n: Modified one memo.\n"
"Modified %n memos."
msgstr ""
#: conduits/knotes/knotes-action.cpp:821
#, c-format
msgid ""
"_n: Deleted one memo.\n"
"Deleted %n memos."
msgstr ""
#: conduits/knotes/knotes-action.cpp:827
#, c-format
msgid ""
"_n: Added one note to KNotes.\n"
"Added %n notes to KNotes."
msgstr ""
#: conduits/knotes/knotes-action.cpp:833
#, c-format
msgid ""
"_n: Modified one note in KNotes.\n"
"Modified %n notes in KNotes."
msgstr ""
#: conduits/knotes/knotes-action.cpp:839
#, c-format
msgid ""
"_n: Deleted one note from KNotes.\n"
"Deleted %n notes from KNotes."
msgstr ""
#: conduits/knotes/knotes-action.cpp:844
msgid "No change to KNotes."
msgstr ""
#: conduits/knotes/knotes-factory.cpp:67
msgid "KNotes Conduit for KPilot"
msgstr "KPilot için KNotes Kanalı"
#: conduits/knotes/knotes-factory.cpp:69
msgid "Configures the KNotes Conduit for KPilot"
msgstr "KPilot için KNotes Bağlantısını Ayarlar"
#: conduits/knotes/knotes-setup.cpp:59
msgid "KNotes"
msgstr "KNotes"
#: conduits/malconduit/mal-conduit.cpp:121 conduits/malconduit/mal-setup.cpp:62
msgid "MAL"
msgstr "MAL"
#: conduits/malconduit/mal-conduit.cpp:193
msgid ""
"Skipping MAL sync, because last synchronization was not long enough ago."
msgstr ""
#: conduits/malconduit/mal-conduit.cpp:202
msgid "MAL synchronization failed (no SyncInfo)."
msgstr ""
#: conduits/malconduit/mal-conduit.cpp:217
msgid "No proxy server is set."
msgstr ""
#: conduits/malconduit/mal-conduit.cpp:220
#, c-format
msgid "Using proxy server: %1"
msgstr ""
#: conduits/malconduit/mal-conduit.cpp:259
msgid "No SOCKS proxy is set."
msgstr ""
#: conduits/malconduit/mal-conduit.cpp:262
#, c-format
msgid "Using SOCKS proxy: %1"
msgstr ""
#: conduits/memofileconduit/memofile-conduit.cpp:70
#: conduits/memofileconduit/memofile-factory.cpp:61
msgid "Memofile"
msgstr ""
#: conduits/memofileconduit/memofile-conduit.cpp:101
msgid "Unable to open the memo databases on the handheld."
msgstr ""
#: conduits/memofileconduit/memofile-conduit.cpp:109
msgid "Cannot initialize from pilot."
msgstr ""
#: conduits/memofileconduit/memofile-conduit.cpp:116
msgid "Cannot initialize the memo files from disk."
msgstr ""
#: conduits/memofileconduit/memofile-conduit.cpp:123
#, c-format
msgid " Syncing with %1."
msgstr "%1 ile eşzamanlanıyor."
#: conduits/memofileconduit/memofile-conduit.cpp:126
msgid " Copying Pilot to PC..."
msgstr "Pilot Bilgisayara Kopyalanıyor..."
#: conduits/memofileconduit/memofile-conduit.cpp:131
msgid " Copying PC to Pilot..."
msgstr "Bilgisayar Pilota Kopyalanıyor..."
#: conduits/memofileconduit/memofile-conduit.cpp:135
msgid " Doing regular sync..."
msgstr "Olağan eşzamanlama yapılıyor..."
#: conduits/memofileconduit/memofile-factory.cpp:63
msgid "Memofile Conduit for KPilot"
msgstr ""
#: conduits/memofileconduit/memofile-factory.cpp:65
msgid "Configures the Memofile Conduit for KPilot"
msgstr ""
#: conduits/notepadconduit/notepad-conduit.cpp:59
#: conduits/notepadconduit/notepad-factory.cpp:89
msgid "Notepad"
msgstr "Not defteri"
#: conduits/notepadconduit/notepad-conduit.cpp:79
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:591
#, c-format
msgid "Unable to open %1"
msgstr "%1 açılamadı"
#: conduits/notepadconduit/notepad-conduit.cpp:105
#, c-format
msgid ""
"_n: 1 notepad could not be saved\n"
"%n notepads could not be saved"
msgstr ""
#: conduits/notepadconduit/notepad-conduit.cpp:106
#, c-format
msgid ""
"_n: 1 notepad saved\n"
"%n notepads saved"
msgstr ""
#: conduits/notepadconduit/notepad-factory.cpp:67
msgid "Saves notepads to png files"
msgstr ""
#: conduits/notepadconduit/notepad-factory.cpp:69
msgid "Configures the Notepad Conduit for KPilot"
msgstr ""
#: conduits/notepadconduit/notepad-factory.cpp:78
msgid "Notepad conduit is based on Angus' read-notepad, part of pilot-link"
msgstr ""
#: conduits/null/null-conduit.cpp:63 conduits/null/null-factory.cpp:63
msgid "Null"
msgstr "BOŞ"
#: conduits/null/null-conduit.cpp:81
msgid "NULL conduit is programmed to fail."
msgstr ""
#: conduits/null/null-factory.cpp:65
msgid "Null Conduit for KPilot"
msgstr "KPilot için Boş Kanal"
#: conduits/null/null-factory.cpp:67
msgid "Configures the Null Conduit for KPilot"
msgstr "KPilot için Boş Kanalı Yapılandırır"
#: conduits/popmail/popmail-conduit.cpp:89 conduits/popmail/setupDialog.cpp:66
msgid "KMail"
msgstr "KMail"
#: conduits/popmail/popmail-conduit.cpp:118
#, c-format
msgid ""
"_n: Sent one message\n"
"Sent %n messages"
msgstr ""
#: conduits/popmail/popmail-conduit.cpp:138
msgid "No mail was sent."
msgstr ""
#: conduits/popmail/popmail-conduit.cpp:145
msgid "No mail could be sent."
msgstr ""
#: conduits/popmail/popmail-conduit.cpp:195
msgid "Could not connect to DCOP server for the KMail connection."
msgstr ""
#: conduits/popmail/popmail-conduit.cpp:197
#: conduits/popmail/popmail-conduit.cpp:232
#: conduits/popmail/popmail-conduit.cpp:245
#: conduits/popmail/popmail-conduit.cpp:273
msgid "Error Sending Mail"
msgstr "İleti Göndermede Hata"
#: conduits/popmail/popmail-conduit.cpp:230
#: conduits/popmail/popmail-conduit.cpp:243
msgid "Cannot open temporary file to store mail from Pilot in."
msgstr ""
#: conduits/popmail/popmail-conduit.cpp:272
msgid "DCOP connection with KMail failed."
msgstr "KMail ile DCOP bağlantısı başarısız."
#: conduits/popmail/popmail-conduit.cpp:397
msgid "Cannot perform backup of mail database"
msgstr ""
#: conduits/popmail/popmail-conduit.cpp:405
msgid "Unable to open mail database on handheld"
msgstr ""
#: conduits/popmail/setupDialog.cpp:68
msgid "Mail Conduit for KPilot"
msgstr "KPilot için Posta Kanalı"
#: conduits/popmail/setupDialog.cpp:70
msgid "Configures the Mail Conduit for KPilot"
msgstr ""
#: conduits/popmail/setupDialog.cpp:78 conduits/vcalconduit/todo-setup.cpp:53
#: conduits/vcalconduit/todo-setup.cpp:55
#: conduits/vcalconduit/todo-setup.cpp:57
#: conduits/vcalconduit/vcal-setup.cpp:58
#: conduits/vcalconduit/vcal-setup.cpp:60
#: conduits/vcalconduit/vcal-setup.cpp:62
msgid "Original Author"
msgstr "Asıl Yazar"
#: conduits/popmail/setupDialog.cpp:80
msgid "POP3 code"
msgstr "POP3 kodu"
#: conduits/popmail/setupDialog.cpp:82
msgid "SMTP support and redesign"
msgstr "SMTP desteği"
#: conduits/recordconduit/factory.cpp:64
msgid "Record Conduit"
msgstr ""
#: conduits/recordconduit/factory.cpp:66
msgid "Record Conduit for KPilot"
msgstr ""
#: conduits/recordconduit/factory.cpp:68
msgid "Configures the Record Conduit for KPilot"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:163
#: conduits/sysinfoconduit/sysinfo-setup.cpp:112
msgid "System Information"
msgstr "Sistem Bilgisi"
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:254
msgid "Password set"
msgstr "Parola tanımlandı"
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:258
msgid "No password set"
msgstr "Parola tanımlanmadı"
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:308
msgid "No Cards available via pilot-link"
msgstr "Pilot-link üzerinden Kart mevcut değil"
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:463
msgid "No debug data"
msgstr "Hata ayıklama verisi yok"
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:587
msgid "Unable to open output file, using %1 instead."
msgstr "Çıktı dosyasıılamadı, yerine %1 kullanılıyor."
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:602
#, c-format
msgid "Handheld system information written to the file %1"
msgstr "Avuçiçi sistem bilgisi %1 dosyasına yazıldı"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:52
msgid "HardwareInfo"
msgstr "Donanım Bilgisi"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:53
msgid "UserInfo"
msgstr "Kullanıcı Bilgisi"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:54
msgid "MemoryInfo"
msgstr "Bellek Bilgisi"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:55
msgid "StorageInfo"
msgstr "Depolama Bilgisi"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:56
msgid "DatabaseList"
msgstr "Veritabanı Listesi"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:57
msgid "RecordNumbers"
msgstr "Kayıt Numaraları"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:58
msgid "SyncInfo"
msgstr "Eşzamanlama Bilgisi"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:59
#, fuzzy
msgid "KDEVersion"
msgstr "TDE Sürümü"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:60
msgid "PalmOSVersion"
msgstr "PalmOS Sürümü"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:61
msgid "DebugInformation"
msgstr "Hata Ayıklama Bilgisi"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:95
msgid "KPilot System Information conduit"
msgstr "KPilot Sistem Bilgisi bağlantısı"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:97
msgid ""
"Retrieves System, Hardware, and User Info from the Handheld and stores them "
"to a file."
msgstr ""
"Avuçiçi Aygıt'tan, Sistem, Donanım ve Kullanıcı Bilgisi'ni alır ve bir "
"dosyada saklar."
#: conduits/timeconduit/time-conduit.cpp:57
#: conduits/timeconduit/time-setup.cpp:68 kpilot/datebookWidget.cpp:68
msgid "Time"
msgstr "Zaman"
#: conduits/timeconduit/time-conduit.cpp:91
msgid "Setting the clock on the handheld"
msgstr "El bilgisayarı üzerindeki saat ayarlandı"
#: conduits/timeconduit/time-conduit.cpp:108
msgid ""
"PalmOS 3.25 and 3.3 do not support setting the system time. Skipping the "
"time conduit..."
msgstr ""
"PalmOS 3.25 ve 3.3 sistem zamanın ayarlanmasını desteklemiyor. Zaman ayarı "
"atlanıyor..."
#: conduits/timeconduit/time-setup.cpp:48
msgid "Time Synchronization Conduit for KPilot"
msgstr ""
#: conduits/timeconduit/time-setup.cpp:50
msgid "Synchronizes the Time on the Handheld and the PC"
msgstr ""
#: conduits/vcalconduit/cleanupstate.cpp:62
msgid "Cleaning up ..."
msgstr "Temizleniyor ...Temizleniyor"
#: conduits/vcalconduit/cleanupstate.cpp:91
msgid ""
"An error occurred while uploading \"%1\". You can try to upload the "
"temporary local file \"%2\" manually."
msgstr ""
#: conduits/vcalconduit/initstate.cpp:59
msgid "Initializing conduit ..."
msgstr ""
#: conduits/vcalconduit/pctohhstate.cpp:71
msgid "Copying records to Pilot ..."
msgstr ""
#: conduits/vcalconduit/todo-conduit.cpp:183
#: conduits/vcalconduit/todo-setup.cpp:45
msgid "To-do"
msgstr "Yapılacaklar"
#: conduits/vcalconduit/todo-setup.cpp:47
msgid "To-do Conduit for KPilot"
msgstr ""
#: conduits/vcalconduit/todo-setup.cpp:49
msgid "Configures the To-do Conduit for KPilot"
msgstr ""
#: conduits/vcalconduit/todo-setup.cpp:69
msgid "To-do Destination"
msgstr ""
#: conduits/vcalconduit/vcal-conduit.cpp:178
#: conduits/vcalconduit/vcal-setup.cpp:70
msgid "Calendar"
msgstr "Takvim"
#: conduits/vcalconduit/vcal-conduit.cpp:222
msgid ""
"Event \"%1\" has a yearly recurrence other than by month, will change this "
"to recurrence by month on handheld."
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cpp:183
msgid "Could not open the calendar databases."
msgstr "Takvim veritabanlarıılamadı."
#: conduits/vcalconduit/vcal-conduitbase.cpp:269
msgid ""
"You selected to sync with an iCalendar file, but did not give a filename. "
"Please select a valid file name in the conduit's configuration dialog"
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cpp:291
#: conduits/vcalconduit/vcal-conduitbase.cpp:356
#, c-format
msgid "Using local time zone: %1"
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cpp:292
#: conduits/vcalconduit/vcal-conduitbase.cpp:357
#, c-format
msgid "Using non-local time zone: %1"
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cpp:321
msgid ""
"You chose to sync with the file \"%1\", which cannot be opened or created. "
"Please make sure to supply a valid file name in the conduit's configuration "
"dialog. Aborting the conduit."
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cpp:330
msgid "Syncing with file \"%1\""
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cpp:354
msgid "Syncing with standard calendar resource."
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cpp:367
msgid ""
"Unable to initialize the calendar object. Please check the conduit's setup"
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cpp:425
msgid ""
"The following item was modified both on the Handheld and on your PC:\n"
"PC entry:\n"
"\t"
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cpp:428
msgid ""
"\n"
"Handheld entry:\n"
"\t"
msgstr ""
"\n"
"El bilgisayarı girdisi:\n"
"\t"
#: conduits/vcalconduit/vcal-conduitbase.cpp:430
msgid ""
"\n"
"\n"
"Which entry do you want to keep? It will overwrite the other entry."
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cpp:435
msgid "Conflicting Entries"
msgstr "Çakışan Girdiler"
#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:309
msgid "PC"
msgstr ""
#: conduits/vcalconduit/vcal-setup.cpp:44
msgid "VCal Conduit for KPilot"
msgstr ""
#: conduits/vcalconduit/vcal-setup.cpp:46
msgid "Configures the VCal Conduit for KPilot"
msgstr ""
#: conduits/vcalconduit/vcal-setup.cpp:64
msgid "iCalendar port"
msgstr "iCalendar portu"
#: conduits/vcalconduit/vcal-setup.cpp:66 kpilot/kpilot.cpp:1038
#: kpilot/kpilot.cpp:1039
msgid "Bugfixer"
msgstr "Hata Düzeltici"
#: conduits/vcalconduit/vcal-setup.cpp:69
msgid "Calendar Destination"
msgstr ""
#: kpilot/addressEditor.cpp:59
msgid "Address Editor"
msgstr "Adres Düzenleyici"
#: kpilot/addressEditor.cpp:107
msgid "Phone"
msgstr "Telefon"
#: kpilot/addressEditor.cpp:180
msgid "Last name:"
msgstr "Soyadı:"
#: kpilot/addressEditor.cpp:181
msgid "First name:"
msgstr "Adı:"
#: kpilot/addressEditor.cpp:182
msgid "Title:"
msgstr "Ünvanı:"
#: kpilot/addressEditor.cpp:183
msgid "Company:"
msgstr "Firma:"
#: kpilot/addressEditor.cpp:192
msgid "Address:"
msgstr "Adres:"
#: kpilot/addressEditor.cpp:193
msgid "City:"
msgstr "Şehir:"
#: kpilot/addressEditor.cpp:194
msgid "State:"
msgstr "Durum:"
#: kpilot/addressEditor.cpp:195
msgid "Zip code:"
msgstr "Posta kodu:"
#: kpilot/addressEditor.cpp:196
msgid "Country:"
msgstr "Ülke:"
#: kpilot/addressEditor.cpp:197
msgid "Custom 1:"
msgstr "Özel 1:"
#: kpilot/addressEditor.cpp:198
msgid "Custom 2:"
msgstr "Özel 2:"
#: kpilot/addressEditor.cpp:199
msgid "Custom 3:"
msgstr "Özel 3:"
#: kpilot/addressEditor.cpp:200
msgid "Custom 4:"
msgstr "Özel 4:"
#: kpilot/addressWidget.cpp:187
msgid "There are still %1 address editing windows open."
msgstr ""
#: kpilot/addressWidget.cpp:191
#, c-format
msgid ""
"_n: There is still an address editing window open.\n"
"There are still %n address editing windows open."
msgstr ""
#: kpilot/addressWidget.cpp:224
msgid "<qt>Select the category of addresses to display here.</qt>"
msgstr "<qt>Adres kategorisini görüntülemek için tıklayın.</qt>"
#: kpilot/addressWidget.cpp:226 kpilot/memoWidget.cpp:238
#: kpilot/todoWidget.cpp:220
msgid "Category:"
msgstr "Kategori:"
#: kpilot/addressWidget.cpp:237
msgid ""
"<qt>This list displays all the addresses in the selected category. Click on "
"one to display it to the right.</qt>"
msgstr ""
#: kpilot/addressWidget.cpp:241
msgid "Address info:"
msgstr "Adres bilgisi:"
#: kpilot/addressWidget.cpp:251 kpilot/todoWidget.cpp:257
msgid "Edit Record..."
msgstr "Kaydı Düzenle..."
#: kpilot/addressWidget.cpp:255
msgid "<qt>You can edit an address when it is selected.</qt>"
msgstr ""
#: kpilot/addressWidget.cpp:256 kpilot/todoWidget.cpp:263
msgid "<qt><i>Editing is disabled by the 'internal editors' setting.</i></qt>"
msgstr ""
#: kpilot/addressWidget.cpp:259 kpilot/todoWidget.cpp:266
msgid "New Record..."
msgstr "Yeni Kayıt..."
#: kpilot/addressWidget.cpp:263
msgid "<qt>Add a new address to the address book.</qt>"
msgstr "<qt>Adres defterine yeni bir adres ekle.</qt>"
#: kpilot/addressWidget.cpp:264
msgid "<qt><i>Adding is disabled by the 'internal editors' setting.</i></qt>"
msgstr ""
#: kpilot/addressWidget.cpp:269 kpilot/todoWidget.cpp:275
msgid "Delete Record"
msgstr "Kayıt sil"
#: kpilot/addressWidget.cpp:274
msgid "<qt>Delete the selected address from the address book.</qt>"
msgstr "<qt>Seçili adresleri adres defterinden sil.</qt>"
#: kpilot/addressWidget.cpp:275 kpilot/memoWidget.cpp:285
#: kpilot/todoWidget.cpp:281
msgid "<qt><i>Deleting is disabled by the 'internal editors' setting.</i></qt>"
msgstr ""
#: kpilot/addressWidget.cpp:277
msgid ""
"_: Export addresses to file\n"
"Export..."
msgstr ""
#: kpilot/addressWidget.cpp:281
msgid "<qt>Export all addresses in the selected category to CSV format.</qt>"
msgstr ""
#: kpilot/addressWidget.cpp:393 lib/pilotMemo.cpp:132
msgid "[unknown]"
msgstr "[bilinmeyen]"
#: kpilot/addressWidget.cpp:435 kpilot/todoWidget.cpp:363
msgid "Cannot edit new records until HotSynced with Pilot."
msgstr ""
#: kpilot/addressWidget.cpp:437 kpilot/addressWidget.cpp:574
#: kpilot/todoWidget.cpp:365 kpilot/todoWidget.cpp:498
msgid "HotSync Required"
msgstr "Senkronizasyon Gerekiyor"
#: kpilot/addressWidget.cpp:480
msgid ""
"You cannot add addresses to the address book until you have done a HotSync "
"at least once to retrieve the database layout from your Pilot."
msgstr ""
#: kpilot/addressWidget.cpp:483
msgid "Cannot Add New Address"
msgstr ""
#: kpilot/addressWidget.cpp:572 kpilot/todoWidget.cpp:496
msgid "New records cannot be deleted until HotSynced with pilot."
msgstr ""
#: kpilot/addressWidget.cpp:579 kpilot/todoWidget.cpp:503
msgid "Delete currently selected record?"
msgstr "Seçili olan kayıt silinsin mş?"
#: kpilot/addressWidget.cpp:580 kpilot/todoWidget.cpp:504
msgid "Delete Record?"
msgstr "Kayıt Silinsin Mi?"
#: kpilot/addressWidget.cpp:677
msgid "Export All Addresses"
msgstr ""
#: kpilot/addressWidget.cpp:678
#, c-format
msgid "Export Address Category %1"
msgstr ""
#: kpilot/addressWidget.cpp:696
msgid "The file <i>%1</i> exists. Overwrite?"
msgstr "<i>%1</i> dosyası zaten var. Üzerine yazılsın mı?"
#: kpilot/addressWidget.cpp:697
msgid "Overwrite File?"
msgstr "Dosyanın üzerine yazılsın mı?"
#: kpilot/addressWidget.cpp:710
msgid "The file <i>%1</i> could not be opened for writing."
msgstr ""
#: kpilot/conduitConfigDialog.cpp:252
msgid "<qt>This conduit appears to be broken and cannot be configured.</qt>"
msgstr ""
#: kpilot/conduitConfigDialog.cpp:260
msgid "<qt>This is an old-style conduit.</qt>"
msgstr ""
#: kpilot/conduitConfigDialog.cpp:264
msgid "Configure..."
msgstr "Yapılandır..."
#: kpilot/conduitConfigDialog.cpp:274
msgid ""
"<qt><i>Conduits</i> are external (possibly third-party) programs that "
"perform synchronization actions. They may have individual configurations. "
"Select a conduit to configure it, and enable it by clicking on its checkbox. "
"</qt>"
msgstr ""
#: kpilot/conduitConfigDialog.cpp:282
msgid ""
"<qt><p>The <i>general</i> portion of KPilot's setup contains settings for "
"your hardware and the way KPilot should display your data. For the basic "
"setup, which should fulfill the need of most users, just use the setup "
"wizard below.</p>If you need some special settings, this dialog provides all "
"the options for fine-tuning KPilot. But be warned: The HotSync settings are "
"various esoteric things.</p><p>You can enable an action or conduit by "
"clicking on its checkbox. Checked conduits will be run during a HotSync. "
"Select a conduit to configure it.</p></qt>"
msgstr ""
#: kpilot/conduitConfigDialog.cpp:295
msgid "Configuration Wizard"
msgstr "Yapılandırma Sihirbazı"
#: kpilot/conduitConfigDialog.cpp:369
msgid "About KPilot. Credits."
msgstr ""
#: kpilot/conduitConfigDialog.cpp:372
msgid "Conduits"
msgstr "Kanallar"
#: kpilot/conduitConfigDialog.cpp:374
msgid "General Setup"
msgstr "Genel Ayarlar"
#: kpilot/conduitConfigDialog.cpp:382
msgid "General setup of KPilot (User name, port, general sync settings)"
msgstr ""
#: kpilot/conduitConfigDialog.cpp:384
msgid "Actions for HotSync with individual configuration."
msgstr ""
#: kpilot/conduitConfigDialog.cpp:395 kpilot/kpilotConfigDialog.cpp:470
msgid "Startup and Exit"
msgstr "Başlat ve Çık"
#: kpilot/conduitConfigDialog.cpp:395
msgid "Behavior at startup and exit."
msgstr ""
#: kpilot/conduitConfigDialog.cpp:396 kpilot/kpilotConfigDialog.cpp:418
#: kpilot/kpilotConfigDialog_viewers.ui:33
#, no-c-format
msgid "Viewers"
msgstr "Göstericiler"
#: kpilot/conduitConfigDialog.cpp:396
msgid "Viewer settings."
msgstr ""
#: kpilot/conduitConfigDialog.cpp:397 kpilot/kpilotConfigDialog.cpp:328
#: lib/syncAction.cpp:208
msgid "Backup"
msgstr "Yedekle"
#: kpilot/conduitConfigDialog.cpp:397
msgid "Special settings for backup."
msgstr ""
#: kpilot/conduitConfigDialog.cpp:398 kpilot/kpilot.cpp:261
#: kpilot/kpilot.cpp:263 kpilot/kpilot.cpp:515
#: kpilot/kpilotConfigDialog.cpp:242 lib/syncAction.cpp:204
msgid "HotSync"
msgstr "Senkronizasyon"
#: kpilot/conduitConfigDialog.cpp:398
msgid "Special behavior during HotSync."
msgstr ""
#: kpilot/conduitConfigDialog.cpp:399 kpilot/kpilotConfigDialog.cpp:102
msgid "Device"
msgstr ""
#: kpilot/conduitConfigDialog.cpp:399
msgid "Hardware settings and startup and exit options."
msgstr ""
#: kpilot/conduitConfigDialog.cpp:542
msgid ""
"<qt>This is an internal action which has no configuration options. The "
"action's description is: <i>%1</i> </qt>"
msgstr ""
#: kpilot/conduitConfigDialog.cpp:722
msgid "KPilot Setup"
msgstr "KPilot Yapılandırması"
#: kpilot/conduitConfigDialog.cpp:735
msgid ""
"<qt>No library could be found for the conduit %1. This means that the "
"conduit was not installed properly.</qt>"
msgstr ""
#: kpilot/conduitConfigDialog.cpp:745 kpilot/conduitConfigDialog.cpp:762
msgid "Conduit Error"
msgstr "Kanal Hatası"
#: kpilot/conduitConfigDialog.cpp:752
msgid ""
"<qt>There was a problem loading the library for the conduit %1. This means "
"that the conduit was not installed properly.</qt>"
msgstr ""
#: kpilot/datebookWidget.cpp:58 kpilot/dbviewerWidget.cpp:109
msgid "&Add..."
msgstr "&Ekle..."
#: kpilot/datebookWidget.cpp:61 kpilot/dbviewerWidget.cpp:111
msgid "&Edit..."
msgstr "&Düzenle..."
#: kpilot/datebookWidget.cpp:64
msgid "&Delete..."
msgstr "&Sil..."
#: kpilot/datebookWidget.cpp:69
msgid "Al"
msgstr ""
#: kpilot/datebookWidget.cpp:70
msgid "Rec"
msgstr ""
#: kpilot/datebookWidget.cpp:71 kpilot/listCat.cpp:85
msgid "Description"
msgstr "Açıklama"
#: kpilot/dbAppInfoEditor.cpp:46
msgid "Edit AppInfo Block"
msgstr ""
#: kpilot/dbAppInfoEditor.cpp:68
msgid ""
"To view the Application info block data, please install a hex editor (e.g. "
"khexedit from tdeutils)."
msgstr ""
#: kpilot/dbAppInfoEditor.cpp:86
msgid "Changing the AppInfo block isn't yet supported by KPilot!"
msgstr ""
#: kpilot/dbFlagsEditor.cpp:45
msgid "Edit Database Flags"
msgstr ""
#: kpilot/dbFlagsEditor.cpp:60
msgid ""
"Changing the database flags might corrupt the whole database, or make the "
"data unusable. Do not change the values unless you are absolutely sure you "
"know what you are doing.\n"
"\n"
"Really assign these new flags?"
msgstr ""
#: kpilot/dbFlagsEditor.cpp:60
msgid "Changing Database Flags"
msgstr "Veritabanı Bayrakları Değiştiriliyor"
#: kpilot/dbFlagsEditor.cpp:60 kpilot/dbRecordEditor.cpp:75
msgid "Assign"
msgstr ""
#: kpilot/dbRecordEditor.cpp:53
msgid "Edit Record"
msgstr "Kaydı Düzenle"
#: kpilot/dbRecordEditor.cpp:75
msgid ""
"Changing the record data and flags might corrupt the whole record, or even "
"make the database unusable. Do not change the values unless you are "
"absolutely sure you know what you are doing.\n"
"\n"
"Really assign these new flags?"
msgstr ""
#: kpilot/dbRecordEditor.cpp:75
msgid "Changing Record"
msgstr "Kayıt Değiştiriliyor"
#: kpilot/dbRecordEditor.cpp:106 kpilot/dbRecordEditor_base.ui:24
#, no-c-format
msgid "Record index:"
msgstr "Kayıt indisi:"
#: kpilot/dbRecordEditor.cpp:107 kpilot/dbRecordEditor_base.ui:32
#, no-c-format
msgid "Record ID:"
msgstr "Kayıt No:"
#: kpilot/dbRecordEditor.cpp:108 kpilot/dbRecordEditor.cpp:109
#: kpilot/dbRecordEditor_base.ui:40 kpilot/dbRecordEditor_base.ui:51
#: kpilot/todoEditor_base.ui:99
#, no-c-format
msgid "1"
msgstr "1"
#: kpilot/dbRecordEditor.cpp:110 kpilot/dbRecordEditor_base.ui:70
#, no-c-format
msgid "Flags"
msgstr "Bayraklar"
#: kpilot/dbRecordEditor.cpp:111 kpilot/dbRecordEditor_base.ui:81
#, no-c-format
msgid "&Dirty"
msgstr ""
#: kpilot/dbRecordEditor.cpp:112
msgid "De&leted"
msgstr "&Silindi"
#: kpilot/dbRecordEditor.cpp:113
msgid "&Busy"
msgstr "&Meşgul"
#: kpilot/dbRecordEditor.cpp:114 kpilot/dbRecordEditor_base.ui:105
#, no-c-format
msgid "&Secret"
msgstr "&Gizli"
#: kpilot/dbRecordEditor.cpp:115 kpilot/dbRecordEditor_base.ui:113
#, no-c-format
msgid "&Archived"
msgstr "&Arşivlenmiş"
#: kpilot/dbRecordEditor.cpp:193
msgid ""
"To view and edit the record data, please install a hex editor (e.g. "
"kbytesedit from tdeutils)."
msgstr ""
#: kpilot/dbSelectionDialog.cpp:108
msgid ""
"This is a database that exists on the device. It was not added manually, so "
"it can not removed from the list."
msgstr ""
#: kpilot/dbSelectionDialog.cpp:108
msgid "Database on Device"
msgstr "Aygıttaki Veritabanı"
#: kpilot/dbSelectionDialog.cpp:119
msgid "You need to select a database to delete in the list."
msgstr ""
#: kpilot/dbSelectionDialog.cpp:119
msgid "No Database Selected"
msgstr "Veritabanı Seçilmedi"
#: kpilot/dbviewerWidget.cpp:84
msgid "All Databases"
msgstr "Tüm Veritabanları"
#: kpilot/dbviewerWidget.cpp:85
msgid "Only Applications (*.prc)"
msgstr "Sadece Uygulamalar (*.prc)"
#: kpilot/dbviewerWidget.cpp:86
msgid "Only Databases (*.pdb)"
msgstr "Sadece veritabanları (*.pdb)"
#: kpilot/dbviewerWidget.cpp:93
msgid "General Database &Information"
msgstr "&Genel Veritabanı Bilgisi"
#: kpilot/dbviewerWidget.cpp:95
msgid "&Application Info Block (Categories etc.)"
msgstr ""
#: kpilot/dbviewerWidget.cpp:101
msgid "Rec. Nr."
msgstr ""
#: kpilot/dbviewerWidget.cpp:102
msgid "Length"
msgstr ""
#: kpilot/dbviewerWidget.cpp:103
msgid "Record ID"
msgstr ""
#: kpilot/dbviewerWidget.cpp:189
#, c-format
msgid "<B>Warning:</B> Cannot read database file %1."
msgstr ""
#: kpilot/dbviewerWidget.cpp:194
msgid "<B>Database:</B> %1, %2 records<BR>"
msgstr ""
#: kpilot/dbviewerWidget.cpp:203
msgid "<B>Type:</B> %1, <B>Creator:</B> %2<br><br>"
msgstr ""
#: kpilot/dbviewerWidget.cpp:246 kpilot/dbviewerWidget.cpp:253
#, c-format
msgid "<B>Warning:</B> Cannot read application file %1."
msgstr ""
#: kpilot/dbviewerWidget.cpp:260
msgid "<B>Application:</B> %1<BR><BR>"
msgstr ""
#: kpilot/dbviewerWidget.cpp:267
msgid "Created: %1<BR>"
msgstr ""
#: kpilot/dbviewerWidget.cpp:270
msgid "Modified: %1<BR>"
msgstr ""
#: kpilot/dbviewerWidget.cpp:273
msgid "Backed up: %1<BR>"
msgstr ""
#: kpilot/dbviewerWidget.cpp:353
msgid "You must select a record for editing."
msgstr ""
#: kpilot/dbviewerWidget.cpp:353
msgid "No Record Selected"
msgstr "Hiç Kayıt Seçilmedi"
#: kpilot/dbviewerWidget.cpp:366
msgid ""
"<qt>Do you really want to delete the selected record? This cannot be undone."
"<br><br>Delete record?<qt>"
msgstr ""
#: kpilot/dbviewerWidget.cpp:366
msgid "Deleting Record"
msgstr "Kayıt Siliniyor"
#: kpilot/fileInstallWidget.cpp:71
msgid "Files to install:"
msgstr "Kurulacak dosyalar:"
#: kpilot/fileInstallWidget.cpp:77
msgid "Add File..."
msgstr "Dosya Ekle..."
#: kpilot/fileInstallWidget.cpp:81
msgid "<qt>Choose a file to add to the list of files to install.</qt>"
msgstr "<qt>Yüklenecek dosya listesine eklemek için bir dosya seçin.</qt>"
#: kpilot/fileInstallWidget.cpp:83
msgid "Clear List"
msgstr "Listeyi sil"
#: kpilot/fileInstallWidget.cpp:87
msgid ""
"<qt>Clear the list of files to install. No files will be installed.</qt>"
msgstr ""
#: kpilot/fileInstallWidget.cpp:95
msgid ""
"<qt>This lists files that will be installed on the Pilot during the next "
"HotSync. Drag files here or use the Add button.</qt>"
msgstr ""
#: kpilot/fileInstallWidget.cpp:217
msgid "*.pdb *.prc|PalmOS Databases (*.pdb *.prc)"
msgstr ""
#: kpilot/fileInstallWidget.cpp:291
msgid ""
"_: Delete a single file item\n"
"Delete"
msgstr ""
#: kpilot/fileInstallWidget.cpp:294
msgid "Delete selected files"
msgstr "Seçili dosyaları sil"
#: kpilot/fileInstaller.cpp:109
#, c-format
msgid "Cannot install %1"
msgstr "%1 yüklenemedi"
#: kpilot/fileInstaller.cpp:110
msgid ""
"Only PalmOS database files (like *.pdb and *.prc) can be installed by the "
"file installer."
msgstr ""
#: kpilot/hotSync.cpp:339
#, c-format
msgid "Backup directory: %1."
msgstr "Yedekleme dizini: %1."
#: kpilot/hotSync.cpp:353
msgid "Full backup started."
msgstr "Tam yedekleme başlatıldı."
#: kpilot/hotSync.cpp:358
msgid "Fast backup started"
msgstr "Hızlı yedekleme başlatıldı"
#: kpilot/hotSync.cpp:387
msgid "Exiting on cancel."
msgstr "İşlem iptal edildi."
#: kpilot/hotSync.cpp:399
msgid "Full backup complete."
msgstr "Tam yedekleme tamamlandı."
#: kpilot/hotSync.cpp:403
msgid "Fast backup complete."
msgstr "Hızlı yedekleme tamamlandı."
#: kpilot/hotSync.cpp:419
#, c-format
msgid "Backing up: %1"
msgstr "%1 Yedekleniyor"
#: kpilot/hotSync.cpp:447
#, c-format
msgid "Skipping %1"
msgstr "%1 atlanıyor"
#: kpilot/hotSync.cpp:482
msgid "Backup of %1 failed.\n"
msgstr "%1 Yedeklemesi başarısız.\n"
#: kpilot/hotSync.cpp:540
msgid "... OK.\n"
msgstr "... Tamam.\n"
#: kpilot/hotSync.cpp:548
msgid "Backup failed."
msgstr "Yedekleme başarısız oldu."
#: kpilot/hotSync.cpp:607
msgid "[File Installer]"
msgstr "[Dosya Yükleyici]"
#: kpilot/hotSync.cpp:612
msgid "No Files to install"
msgstr "Kurulacak Dosya Yok."
#: kpilot/hotSync.cpp:624
#, c-format
msgid ""
"_n: Installing one file\n"
"Installing %n Files"
msgstr ""
#: kpilot/hotSync.cpp:649
msgid "Done Installing Files"
msgstr "Dosyaların Kurulumu Tamamlandı"
#: kpilot/hotSync.cpp:663
#, c-format
msgid "Installing %1"
msgstr "%1 Kuruluyor"
#: kpilot/hotSync.cpp:686
msgid "Cannot install file &quot;%1&quot;."
msgstr ""
#: kpilot/hotSync.cpp:713 kpilot/hotSync.cpp:723
msgid "Unable to open file &quot;%1&quot;."
msgstr ""
#: kpilot/hotSync.cpp:732
msgid "Unable to read file &quot;%1&quot;."
msgstr ""
#: kpilot/hotSync.cpp:748
msgid ""
"The database in &quot;%1&quot; has a resource name that is longer than 31 "
"characters. This suggests a bug in the tool used to create the database. "
"KPilot cannot install this database."
msgstr ""
#: kpilot/hotSync.cpp:806
msgid ""
"_: A common name\n"
"John Doe"
msgstr "Murat Yılmaz"
#: kpilot/hotSync.cpp:808
msgid ""
"<qt>Neither KPilot nor the handheld have a username set. They <i>should</i> "
"be set. Should KPilot set them to a default value (<i>%1</i>)?</qt>"
msgstr ""
#: kpilot/hotSync.cpp:814 kpilot/hotSync.cpp:831 kpilot/hotSync.cpp:855
msgid "User Unknown"
msgstr "Bilinmeyen Kullanıcı"
#: kpilot/hotSync.cpp:826
msgid ""
"<qt>The handheld has a username set (<i>%1</i>) but KPilot does not. Should "
"KPilot use this username in future?</qt>"
msgstr ""
#: kpilot/hotSync.cpp:844
msgid ""
"KPilot has a username set (<i>%1</i>) but the handheld does not. Should "
"KPilot's username be set in the handheld as well?"
msgstr ""
#: kpilot/hotSync.cpp:848
msgid ""
"<br/>(<i>Note:</i> If your handheld has been reset to factory defaults, you "
"should use <i>Restore</i> instead of a regular HotSync. Click on Cancel to "
"stop this sync.)"
msgstr ""
#: kpilot/hotSync.cpp:877
msgid ""
"<qt>The handheld thinks that the username is %1; however, KPilot says you "
"are %2.Which of these is the correct name?\n"
"If you click on Cancel, the sync will proceed, but the usernames will not be "
"changed.</qt>"
msgstr ""
#: kpilot/hotSync.cpp:887
msgid "User Mismatch"
msgstr "Kullanıcı Eşleşme Hatası"
#: kpilot/hotSync.cpp:890
msgid "Use KPilot Name"
msgstr ""
#: kpilot/hotSync.cpp:891
msgid "Use Handheld Name"
msgstr ""
#: kpilot/hotSync.cpp:997
msgid "Restore directory does not exist."
msgstr "Kaydetme dizini yok."
#: kpilot/hotSync.cpp:998 kpilot/hotSync.cpp:1013
msgid "Restore not performed."
msgstr ""
#: kpilot/hotSync.cpp:1003
msgid ""
"<qt>Are you sure you want to completely restore your Pilot from the backup "
"directory (<i>%1</i>)? This will erase any information you currently have on "
"your Pilot.</qt>"
msgstr ""
#: kpilot/hotSync.cpp:1008
msgid "Restore Pilot"
msgstr ""
#: kpilot/hotSync.cpp:1010
msgid "Restore <i>not</i> performed."
msgstr ""
#: kpilot/hotSync.cpp:1012
msgid "Canceled by user."
msgstr ""
#: kpilot/hotSync.cpp:1024 kpilot/hotSync.cpp:1094
msgid "Restoring %1..."
msgstr ""
#: kpilot/hotSync.cpp:1044
msgid "File '%1' cannot be read."
msgstr ""
#: kpilot/hotSync.cpp:1071
msgid "OK."
msgstr "Tamam."
#: kpilot/hotSync.cpp:1085
msgid "Restore incomplete."
msgstr "Yeniden yükleme tamamlanmadı."
#: kpilot/hotSync.cpp:1100
msgid "Cannot restore file `%1'."
msgstr "`%1' dosyası yeniden yüklenemedi."
#: kpilot/internalEditorAction.cpp:62
msgid "[Internal Editors]"
msgstr ""
#: kpilot/internalEditorAction.cpp:76
#, c-format
msgid "Databases with changed records: %1"
msgstr ""
#: kpilot/internalEditorAction.cpp:101
msgid "Unable to open the serial or local database for %1. Skipping it."
msgstr ""
#: kpilot/internalEditorAction.cpp:156
msgid "record"
msgstr "kayıt"
#: kpilot/internalEditorAction.cpp:166
msgid "address"
msgstr "adres"
#: kpilot/internalEditorAction.cpp:177
msgid "to-do entry"
msgstr ""
#: kpilot/internalEditorAction.cpp:186
msgid "memo"
msgstr "hatırlatma"
#: kpilot/internalEditorAction.cpp:197
msgid "calendar entry"
msgstr ""
#: kpilot/internalEditorAction.cpp:204
msgid ""
"The %1 with ID %2 of the database \"%3\" was changed on the handheld and in "
"the internal editor. Shall the changes in KPilot be copied to the handheld, "
"and so override the changes there?"
msgstr ""
#: kpilot/internalEditorAction.cpp:209
#, c-format
msgid "Conflict in database %1"
msgstr ""
#: kpilot/internalEditorAction.cpp:211
msgid "Use KPilot"
msgstr ""
#: kpilot/internalEditorAction.cpp:211
msgid "Use Handheld"
msgstr ""
#: kpilot/internalEditorAction.cpp:212
msgid "Use &KPilot"
msgstr ""
#: kpilot/internalEditorAction.cpp:213
msgid "Use &Handheld"
msgstr ""
#: kpilot/internalEditorAction.cpp:228 kpilot/internalEditorAction.cpp:244
msgid "Entry in KPilot"
msgstr ""
#: kpilot/internalEditorAction.cpp:235 kpilot/internalEditorAction.cpp:272
msgid "Entry on Handheld"
msgstr ""
#: kpilot/internalEditorAction.cpp:263 kpilot/internalEditorAction.cpp:291
msgid ""
"To view and edit the record data, please install a hex editor (e.g. khexedit "
"from tdeutils)."
msgstr ""
#: kpilot/internalEditorAction.cpp:315
#, c-format
msgid "Databases with changed flags: %1"
msgstr ""
#: kpilot/internalEditorAction.cpp:333
msgid "Setting the database flags on the handheld is not yet supported."
msgstr ""
#: kpilot/internalEditorAction.cpp:356
#, c-format
msgid "Databases with changed AppBlock: %1"
msgstr ""
#: kpilot/kpilot.cpp:162
msgid "Starting the KPilot daemon ..."
msgstr ""
#: kpilot/kpilot.cpp:179
msgid ""
"Could not start the KPilot daemon. The system error message was: &quot;"
"%1&quot;"
msgstr ""
#: kpilot/kpilot.cpp:196
msgid "Daemon status is `%1'"
msgstr ""
#: kpilot/kpilot.cpp:197
msgid "not running"
msgstr ""
#: kpilot/kpilot.cpp:214
msgid "Using character set %1 on the handheld."
msgstr ""
#: kpilot/kpilot.cpp:266 kpilot/kpilot.cpp:268
msgid "To-do Viewer"
msgstr "Yapılacak Ögesi Gösterici"
#: kpilot/kpilot.cpp:270 kpilot/kpilot.cpp:272
#: kpilot/kpilotConfigDialog_viewers.ui:74
#, no-c-format
msgid "Address Viewer"
msgstr "Adres Görüntüleyici"
#: kpilot/kpilot.cpp:274 kpilot/kpilot.cpp:276
msgid "Memo Viewer"
msgstr "Not Görüntüleyici"
#: kpilot/kpilot.cpp:278 kpilot/kpilot.cpp:281 kpilot/pilotDaemon.cpp:736
msgid "File Installer"
msgstr "Dosya Yükleyici"
#: kpilot/kpilot.cpp:283 kpilot/kpilot.cpp:285
msgid "Generic DB Viewer"
msgstr ""
#: kpilot/kpilot.cpp:360
msgid "Next sync will be a backup. "
msgstr ""
#: kpilot/kpilot.cpp:361 kpilot/kpilot.cpp:369 kpilot/kpilot.cpp:377
#: kpilot/kpilot.cpp:385 kpilot/kpilot.cpp:393 kpilot/kpilot.cpp:401
#: kpilot/pilotDaemon.cpp:671
msgid "Please press the HotSync button."
msgstr "Lütfen senkronizasyon tuşuna basın"
#: kpilot/kpilot.cpp:368
msgid "Next sync will restore the Pilot from backup. "
msgstr ""
#: kpilot/kpilot.cpp:376
msgid "Next sync will be a regular HotSync. "
msgstr ""
#: kpilot/kpilot.cpp:384
msgid "Next sync will be a Full Sync. "
msgstr ""
#: kpilot/kpilot.cpp:392
msgid "Next sync will copy Handheld data to PC. "
msgstr ""
#: kpilot/kpilot.cpp:400
msgid "Next sync will copy PC data to Handheld. "
msgstr ""
#: kpilot/kpilot.cpp:428
msgid "The daemon has exited."
msgstr ""
#: kpilot/kpilot.cpp:429
msgid "No further HotSyncs are possible."
msgstr ""
#: kpilot/kpilot.cpp:430
msgid "Restart the daemon to HotSync again."
msgstr ""
#: kpilot/kpilot.cpp:450
#, c-format
msgid "Cannot start a Sync now. %1"
msgstr ""
#: kpilot/kpilot.cpp:463
msgid "Cannot start Sync"
msgstr ""
#: kpilot/kpilot.cpp:517
msgid "Select the kind of HotSync to perform next."
msgstr ""
#: kpilot/kpilot.cpp:518
msgid ""
"Select the kind of HotSync to perform next. This applies only to the next "
"HotSync; to change the default, use the configuration dialog."
msgstr ""
#: kpilot/kpilot.cpp:525
msgid "&HotSync"
msgstr "&Senkronizasyon"
#: kpilot/kpilot.cpp:528
msgid "Next HotSync will be normal HotSync."
msgstr ""
#: kpilot/kpilot.cpp:529
msgid "Tell the daemon that the next HotSync should be a normal HotSync."
msgstr ""
#: kpilot/kpilot.cpp:533
msgid "Full&Sync"
msgstr ""
#: kpilot/kpilot.cpp:536
msgid "Next HotSync will be a FullSync."
msgstr ""
#: kpilot/kpilot.cpp:537
msgid ""
"Tell the daemon that the next HotSync should be a FullSync (check data on "
"both sides)."
msgstr ""
#: kpilot/kpilot.cpp:541
msgid "&Backup"
msgstr "&Yedekle"
#: kpilot/kpilot.cpp:544 kpilot/kpilot.cpp:560
msgid "Next HotSync will be backup."
msgstr ""
#: kpilot/kpilot.cpp:545
msgid ""
"Tell the daemon that the next HotSync should back up the Handheld to the PC."
msgstr ""
#: kpilot/kpilot.cpp:549
msgid "&Restore"
msgstr "&Kurtar"
#: kpilot/kpilot.cpp:552
msgid "Next HotSync will be restore."
msgstr ""
#: kpilot/kpilot.cpp:553
msgid ""
"Tell the daemon that the next HotSync should restore the Handheld from data "
"on the PC."
msgstr ""
#: kpilot/kpilot.cpp:557 kpilot/kpilotConfigDialog_sync.ui:59
#: lib/syncAction.cpp:207
#, no-c-format
msgid "Copy Handheld to PC"
msgstr "Avuçiçi'ni bilgisayara kopyala"
#: kpilot/kpilot.cpp:561
msgid ""
"Tell the daemon that the next HotSync should copy all data from the Handheld "
"to the PC, overwriting entries on the PC."
msgstr ""
#: kpilot/kpilot.cpp:566 kpilot/kpilotConfigDialog_sync.ui:54
#: lib/syncAction.cpp:206
#, no-c-format
msgid "Copy PC to Handheld"
msgstr "Bilgisayarı Avuçiçi'ne kopyala"
#: kpilot/kpilot.cpp:569
msgid "Next HotSync will copy PC to Handheld."
msgstr ""
#: kpilot/kpilot.cpp:570
msgid ""
"Tell the daemon that the next HotSync should copy all data from the PC to "
"the Handheld, overwriting entries on the Handheld."
msgstr ""
#: kpilot/kpilot.cpp:577
msgid "&List Only"
msgstr ""
#: kpilot/kpilot.cpp:580
msgid "Next HotSync will list databases."
msgstr ""
#: kpilot/kpilot.cpp:581
msgid ""
"Tell the daemon that the next HotSync should just list the files on the "
"Handheld and do nothing else."
msgstr ""
#: kpilot/kpilot.cpp:588
msgid "Rese&t Link"
msgstr "&Bağlantıyı Sıfırla"
#: kpilot/kpilot.cpp:591
msgid "Reset the device connection."
msgstr ""
#: kpilot/kpilot.cpp:592
msgid "Try to reset the daemon and its connection to the Handheld."
msgstr ""
#: kpilot/kpilot.cpp:597
msgid "Quit KPilot, (and stop the daemon if configured that way)."
msgstr ""
#: kpilot/kpilot.cpp:613
msgid "Configuration &Wizard..."
msgstr "Yapılandırma &Sihirbazı...Yapılandırma Sihirbazı"
#: kpilot/kpilot.cpp:616
msgid "Configure KPilot using the configuration wizard."
msgstr ""
#: kpilot/kpilot.cpp:851
msgid ""
"The library containing the configuration wizard for KPilot could not be "
"loaded, and the wizard is not available. Please try to use the regular "
"configuration dialog."
msgstr ""
#: kpilot/kpilot.cpp:854
msgid "Wizard Not Available"
msgstr "Sihirbaz Kullanılabilir Değil"
#: kpilot/kpilot.cpp:898
msgid "Changed username to `%1'."
msgstr ""
#: kpilot/kpilot.cpp:927
msgid ""
"Cannot run KPilot's configuration wizard right now (KPilot's UI is already "
"busy)."
msgstr ""
#: kpilot/kpilot.cpp:951
msgid "Cannot configure KPilot right now (KPilot's UI is already busy)."
msgstr ""
#: kpilot/kpilot.cpp:991
msgid "Setup the Pilot device, conduits and other parameters"
msgstr ""
#: kpilot/kpilot.cpp:993 kpilot/pilotDaemon.cpp:1296
msgid "Set debugging level"
msgstr "Hata ayıklma seviyesini ayarla"
#: kpilot/kpilot.cpp:1015
msgid "KPilot"
msgstr "KPilot"
#: kpilot/kpilot.cpp:1024 kpilot/pilotDaemon.cpp:1320
msgid "Project Leader"
msgstr "Proje Lideri"
#: kpilot/kpilot.cpp:1030 kpilot/kpilot.cpp:1032
msgid "Core and conduits developer"
msgstr ""
#: kpilot/kpilot.cpp:1034
msgid "VCal conduit"
msgstr "VCal kanalı"
#: kpilot/kpilot.cpp:1035
msgid "Abbrowser conduit"
msgstr "Abbrowser kanalı"
#: kpilot/kpilot.cpp:1036
msgid "Expenses conduit"
msgstr ""
#: kpilot/kpilot.cpp:1037
msgid "Notepad conduit, Bugfixer"
msgstr ""
#: kpilot/kpilot.cpp:1041
msgid "XML GUI"
msgstr "XML GUI"
#: kpilot/kpilot.cpp:1044
msgid ".ui files"
msgstr ".ui dosyaları"
#: kpilot/kpilot.cpp:1046
msgid "Bugfixer, coolness"
msgstr ""
#: kpilot/kpilot.cpp:1048
msgid "VCalconduit state machine, CMake"
msgstr ""
#: kpilot/kpilotConfig.cpp:163
msgid "The configuration file is outdated."
msgstr "Yapılandırma dosyasının günü geçmiş."
#: kpilot/kpilotConfig.cpp:165
msgid "The configuration file has version %1, while KPilot needs version %2."
msgstr ""
"Yapılandırma dosyasının sürümü %1, ancak KPilot programının %2 sürümüne "
"ihtiyacı var."
#: kpilot/kpilotConfig.cpp:170
msgid ""
"Please run KPilot and check the configuration carefully to update the file."
msgstr ""
#: kpilot/kpilotConfig.cpp:174
msgid "Important changes to watch for are:"
msgstr "İzlenmesi gereken önemli değişiklikler:"
#: kpilot/kpilotConfig.cpp:178
msgid ""
"Renamed conduits, Kroupware and file installer have been made conduits as "
"well."
msgstr ""
#: kpilot/kpilotConfig.cpp:181
msgid "Conflict resolution is now a global setting."
msgstr ""
#: kpilot/kpilotConfig.cpp:186
msgid "Changed format of no-backup databases."
msgstr ""
#: kpilot/kpilotConfig.cpp:199
msgid ""
"The configuration file for KPilot is out-of date. Please run KPilot to "
"update it."
msgstr ""
#: kpilot/kpilotConfig.cpp:202 kpilot/kpilotConfig.cpp:327
msgid "Configuration File Out-of Date"
msgstr "Yapılandırma Dosyası Güncel Değil"
#: kpilot/kpilotConfig.cpp:220
msgid ""
"The settings for the file installer have been moved to the conduits "
"configuration. Check the installed conduits list."
msgstr ""
#: kpilot/kpilotConfig.cpp:223
msgid "Settings Updated"
msgstr "Ayarlar Güncellendi"
#: kpilot/kpilotConfig.cpp:248
msgid ""
"<qt>The following old conduits were found on your system. It is a good idea "
"to remove them and the associated <tt>.la</tt> and <tt>.so.0</tt> files.</qt>"
msgstr ""
#: kpilot/kpilotConfig.cpp:253
msgid "Old Conduits Found"
msgstr ""
#: kpilot/kpilotConfig.cpp:285
msgid ""
"<qt>The no backup databases listed in your configuration file have been "
"adjusted to the new format. Database creator IDs have been changed to use "
"square brackets []."
msgstr ""
#: kpilot/kpilotConfig.cpp:289
msgid "No Backup Databases Updated"
msgstr ""
#: kpilot/kpilotConfig.cpp:310
msgid ""
"KPilot is not configured for use. You may use the configuration wizard or "
"the normal configure dialog to configure KPilot."
msgstr ""
#: kpilot/kpilotConfig.cpp:313
msgid "Not Configured"
msgstr "Yapılandırılmamış"
#: kpilot/kpilotConfig.cpp:314
msgid "Use &Wizard"
msgstr ""
#: kpilot/kpilotConfig.cpp:315
msgid "Use &Dialog"
msgstr ""
#: kpilot/kpilotConfig.cpp:323
msgid ""
"The configuration file for KPilot is out-of date. KPilot can update some "
"parts of the configuration automatically. Do you wish to continue?"
msgstr ""
#: kpilot/kpilotConfigDialog.cpp:68
msgid ""
"<qt>The settings for configuration page <i>%1</i> have been changed. Do you "
"want to save the changes before continuing?</qt>"
msgstr ""
"<qt><i>%1</i> yapılandırma ayarları değiştirildi. Devam etmeden önce "
"değişiklikleri saklamak ister misiniz?</qt>"
#: kpilot/kpilotConfigDialog.cpp:145
msgid ""
"<qt>The device name you entered (<i>%1</i>) is longer than 13 characters. "
"This is probably unsupported and can cause problems. Are you sure you want "
"to use this device name?</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog.cpp:150
msgid "Device Name too Long"
msgstr "Aygıt Adı Çok Uzun"
#: kpilot/kpilotConfigDialog.cpp:150
msgid "Use"
msgstr ""
#: kpilot/kpilotConfigDialog.cpp:150
msgid "Do Not Use"
msgstr "Kullanma"
#: kpilot/kpilotConfigWizard.cpp:62
msgid "Pilot Info"
msgstr "KPilot Bilgisi"
#: kpilot/kpilotConfigWizard.cpp:64
msgid "Application to Sync With"
msgstr ""
#: kpilot/kpilotConfigWizard.cpp:127
msgid "general TDE-PIM"
msgstr "Genel TDE-PIM"
#: kpilot/kpilotConfigWizard.cpp:133
msgid ""
"_: Gnome's PIM suite\n"
"Evolution"
msgstr "Evolution"
#: kpilot/kpilotConfigWizard.cpp:157
msgid ""
"KPilot cannot yet synchronize the addressbook with Evolution, so the "
"addressbook conduit was disabled.\n"
"When syncing the calendar or to-do list using KPilot please quit Evolution "
"before the sync, otherwise you will lose data."
msgstr ""
#: kpilot/kpilotConfigWizard.cpp:157
msgid "Restrictions with Evolution"
msgstr ""
#: kpilot/kpilotConfigWizard.cpp:162
msgid ""
"_: Kpilot will sync with nothing\n"
"nothing (it will backup only)"
msgstr ""
#: kpilot/kpilotConfigWizard.cpp:166
msgid ""
"_: TDE's PIM suite\n"
"Kontact"
msgstr ""
#: kpilot/kpilotConfigWizard.cpp:200
#, c-format
msgid "KPilot is now configured to sync with %1."
msgstr ""
#: kpilot/kpilotConfigWizard.cpp:205
msgid ""
"The remaining options in the config dialog are advanced options and can be "
"used to fine-tune KPilot."
msgstr ""
#: kpilot/kpilotConfigWizard.cpp:210
msgid "Automatic Configuration Finished"
msgstr "Otomatik Yapılandırma Tamamlandı"
#: kpilot/kpilotConfigWizard.cpp:217
msgid ""
"Please put the handheld in the cradle, press the hotsync button and click on "
"\"Continue\".\n"
"\n"
"Some kernel versions (Linux 2.6.x) have problems with the visor kernel "
"module (for Sony Clie devices). Running an autodetection in that case might "
"block the computer from doing hotsyncs until it is rebooted. In that case it "
"might be advisable not to continue."
msgstr ""
#: kpilot/kpilotConfigWizard.cpp:223
msgid "Handheld Detection"
msgstr ""
#: kpilot/kpilotProbeDialog.cpp:90
msgid "Autodetecting Your Handheld"
msgstr ""
#: kpilot/kpilotProbeDialog.cpp:90
msgid "Restart Detection"
msgstr ""
#: kpilot/kpilotProbeDialog.cpp:97
msgid ""
"KPilot is now trying to automatically detect the device of your handheld. "
"Please press the hotsync button if you have not done so already."
msgstr ""
#: kpilot/kpilotProbeDialog.cpp:100
msgid "Status"
msgstr "Durum"
#: kpilot/kpilotProbeDialog.cpp:104
msgid "Autodetection not yet started..."
msgstr ""
#: kpilot/kpilotProbeDialog.cpp:113
msgid "Detected Values"
msgstr ""
#: kpilot/kpilotProbeDialog.cpp:119
msgid "Handheld user:"
msgstr ""
#: kpilot/kpilotProbeDialog.cpp:123
msgid "Device:"
msgstr "Aygıt:"
#: kpilot/kpilotProbeDialog.cpp:126 kpilot/kpilotProbeDialog.cpp:129
msgid "[Not yet known]"
msgstr ""
#: kpilot/kpilotProbeDialog.cpp:195
msgid "Starting detection..."
msgstr ""
#: kpilot/kpilotProbeDialog.cpp:233
msgid "Waiting for handheld to connect..."
msgstr ""
#: kpilot/kpilotProbeDialog.cpp:266
msgid "Timeout reached, could not detect a handheld."
msgstr ""
#: kpilot/kpilotProbeDialog.cpp:267
msgid ""
"<qt>A handheld could not be detected. Possible check the following things:</"
"p><ul><li> Have you pressed the hotsync button on the handheld?\n"
"<li> Make sure the device sits in the cradle correctly.\n"
"<li> Make sure the cradle is correctly plugged in to the computer.\n"
"<li> Have you checked that your device is actually supported by kpilot (see "
"http://www.kpilot.org).\n"
"</ul>"
msgstr ""
#: kpilot/kpilotProbeDialog.cpp:273
msgid "Automatic Detection Failed"
msgstr "Otomatik Bulma Başarısız Oldu"
#: kpilot/kpilotProbeDialog.cpp:288
#, c-format
msgid "Found a connected device on %1"
msgstr ""
#: kpilot/kpilotProbeDialog.cpp:338
msgid "Disconnected from all devices"
msgstr ""
#: kpilot/kroupware.cpp:126
msgid "Syncing to-dos with KMail"
msgstr ""
#: kpilot/kroupware.cpp:135
msgid "Syncing calendar with KMail"
msgstr ""
#: kpilot/kroupware.cpp:177
msgid "Syncing Notes with Mail"
msgstr ""
#: kpilot/kroupware.cpp:188
msgid "Rewriting to-dos to KMail..."
msgstr ""
#: kpilot/kroupware.cpp:195
msgid "Rewriting Calendar to KMail"
msgstr ""
#: kpilot/kroupware.cpp:230
msgid "Syncing KMail with Addresses "
msgstr ""
#: kpilot/kroupware.cpp:259
msgid "Syncing KMail with Notes"
msgstr ""
#: kpilot/logFile.cpp:97 lib/actions.cpp:134
msgid "HotSync finished."
msgstr "Senkronizasyon tamamlandı."
#: kpilot/logWidget.cpp:90
msgid ""
"<qt>This lists all the messages received during the current HotSync</qt>"
msgstr ""
#: kpilot/logWidget.cpp:119
msgid "<qt><b>HotSync Log</b></qt>"
msgstr ""
#: kpilot/logWidget.cpp:134
msgid ""
"_: Clear the text of HotSync messages\n"
"Clear Log"
msgstr "Kayıtları Temizle"
#: kpilot/logWidget.cpp:136
msgid "<qt>Clears the list of messages from the current HotSync.</qt>"
msgstr ""
#: kpilot/logWidget.cpp:140
msgid "Save Log..."
msgstr ""
#: kpilot/logWidget.cpp:141
msgid ""
"<qt>You can save the list of messages received during this HotSync to a file "
"(for example for use in a bug report) by clicking here.</qt>"
msgstr ""
#: kpilot/logWidget.cpp:150
msgid "Sync progress:"
msgstr ""
#: kpilot/logWidget.cpp:153
msgid "<qt>The (estimated) percentage completed in the current HotSync.</qt>"
msgstr ""
#: kpilot/logWidget.cpp:270
msgid "<b>HotSync Finished.</b>"
msgstr ""
#: kpilot/logWidget.cpp:334
msgid "Save Log"
msgstr "Günlüğü Kaydet"
#: kpilot/logWidget.cpp:341
msgid "The file exists. Do you want to overwrite it?"
msgstr "Bu dosya mevcut. Üzerine yazılsın mı?"
#: kpilot/logWidget.cpp:343
msgid "File Exists"
msgstr "Dosya Mevcut"
#: kpilot/logWidget.cpp:343
msgid "Do Not Overwrite"
msgstr "Üzerine Yazma"
#: kpilot/logWidget.cpp:367
msgid "<qt>Cannot open the file &quot;%1&quot; for writing; try again?</qt>"
msgstr ""
#: kpilot/logWidget.cpp:369
msgid "Cannot Save"
msgstr "Kaydedilemiyor"
#: kpilot/logWidget.cpp:369
msgid "Try Again"
msgstr "Yeniden Dene"
#: kpilot/logWidget.cpp:369
msgid "Do Not Try"
msgstr "Deneme"
#: kpilot/main-test.cpp:66
msgid "Path to Pilot device node"
msgstr ""
#: kpilot/main-test.cpp:69
msgid "List DBs"
msgstr ""
#: kpilot/main-test.cpp:71
msgid "Backup Pilot to <dest dir>"
msgstr ""
#: kpilot/main-test.cpp:73
msgid "Restore Pilot from backup"
msgstr ""
#: kpilot/main-test.cpp:76
msgid "Run conduit from desktop file <filename>"
msgstr ""
#: kpilot/main-test.cpp:80
msgid "Run a specific check (with the device)"
msgstr ""
#: kpilot/main-test.cpp:83
msgid "Show KPilot configuration information"
msgstr "KPilot Yapılandırma bilgilerini göster"
#: kpilot/main-test.cpp:86
msgid "Set the debug level"
msgstr ""
#: kpilot/main-test.cpp:94
msgid "*Really* run the conduit, not in test mode."
msgstr ""
#: kpilot/main-test.cpp:98
msgid "Run the conduit in file-test mode."
msgstr ""
#: kpilot/main-test.cpp:101
msgid "Copy Pilot to Desktop."
msgstr ""
#: kpilot/main-test.cpp:104
msgid "Copy Desktop to Pilot."
msgstr ""
#: kpilot/main-test.cpp:107
msgid "Repeated perform action - only useful for --list"
msgstr ""
#: kpilot/main-test.cpp:347
msgid "KPilotTest"
msgstr "KPilot Deneme"
#: kpilot/main-test.cpp:352
msgid "KPilot Maintainer"
msgstr "KPilot Yazarı"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:38
#: conduits/docconduit/doc-setupdialog.ui:43
#: conduits/docconduit/kpalmdoc_dlgbase.ui:28 conduits/knotes/setup_base.ui:34
#: conduits/malconduit/mal-setup_dialog.ui:38
#: conduits/memofileconduit/setup_base.ui:68
#: conduits/notepadconduit/notepad-setup.ui:32 conduits/null/setup_base.ui:68
#: conduits/recordconduit/setup_base.ui:68
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:35
#: conduits/timeconduit/time-setup_dialog.ui:35
#: conduits/vcalconduit/korganizerConduit.ui:66 kpilot/main-test.cpp:357
#, no-c-format
msgid "General"
msgstr "Genel"
#: kpilot/main-test.cpp:359
msgid "Conduit Actions"
msgstr "Kanal Eylemleri"
#: kpilot/memoWidget.cpp:234
msgid ""
"Select the category of addresses\n"
"to display here."
msgstr ""
"Adres kategorisini görüntülemek\n"
" için tıklayın."
#: kpilot/memoWidget.cpp:237
msgid "Memos:"
msgstr "Notlar:"
#: kpilot/memoWidget.cpp:249
msgid ""
"This list displays all the memos\n"
"in the selected category. Click on\n"
"one to display it to the right."
msgstr ""
"Seçilen kategorideki tüm notları\n"
"görüntüler. Sağ tarafta görmek\n"
"istediğiniz nota tıklayın"
#: kpilot/memoWidget.cpp:253
msgid "Memo text:"
msgstr "Not içeriği:"
#: kpilot/memoWidget.cpp:261
msgid "The text of the selected memo appears here."
msgstr "Seçilen notun içeriği buradan görülebilir."
#: kpilot/memoWidget.cpp:264
msgid "Import Memo..."
msgstr "Hatırlatmaları Al..."
#: kpilot/memoWidget.cpp:268
msgid "Read a text file and add it to the Pilot's memo database."
msgstr "Bir metin belgesini okur ve Pilot'un not veritabanına ekler."
#: kpilot/memoWidget.cpp:269
msgid "<qt><i>Import is disabled by the 'internal editors' setting.</i></qt>"
msgstr ""
#: kpilot/memoWidget.cpp:272
msgid "Export Memo..."
msgstr "Hatırlatmaları Aktar..."
#: kpilot/memoWidget.cpp:277
msgid "Write the selected memo to a file."
msgstr "Seçili notu dosyaya yazar"
#: kpilot/memoWidget.cpp:279
msgid "Delete Memo"
msgstr "Not Sil"
#: kpilot/memoWidget.cpp:284
msgid "Delete the selected memo."
msgstr "Seçili olan notu sil"
#: kpilot/memoWidget.cpp:288
msgid "Add Memo"
msgstr ""
#: kpilot/memoWidget.cpp:291
msgid "Add a new memo to the database."
msgstr ""
#: kpilot/memoWidget.cpp:343
msgid "Delete currently selected memo?"
msgstr "Seçili olan not silinsin mi?"
#: kpilot/memoWidget.cpp:344
msgid "Delete Memo?"
msgstr "Not silinsin mi?"
#: kpilot/memoWidget.cpp:367
msgid "Cannot open MemoDB to delete record."
msgstr ""
#: kpilot/memoWidget.cpp:368
msgid "Cannot Delete Memo"
msgstr ""
#: kpilot/pilotComponent.cpp:153
msgid "All"
msgstr "Hepsi"
#: kpilot/pilotDaemon.cpp:157
msgid "Start &KPilot"
msgstr "KPilot'u &Başlat"
#: kpilot/pilotDaemon.cpp:159
msgid "&Configure KPilot..."
msgstr "&KPilot Uygulamasını Yapılandır..."
#: kpilot/pilotDaemon.cpp:164
msgid ""
"_: Appended to names of sync types to indicate the sync will happen just one "
"time\n"
" (once)"
msgstr ""
#: kpilot/pilotDaemon.cpp:168
msgid "Default (%1)"
msgstr "Öntanımlı (%1)Öntanımlı"
#: kpilot/pilotDaemon.cpp:185
msgid "Next &Sync"
msgstr "So&nraki Eşzamanlama"
#: kpilot/pilotDaemon.cpp:670
msgid "Next HotSync will be: %1. "
msgstr ""
#: kpilot/pilotDaemon.cpp:902
msgid "HotSync is disabled while the screen is locked."
msgstr ""
#: kpilot/pilotDaemon.cpp:907
msgid ""
"HotSync is disabled because KPilot could not determine the state of the "
"screen saver. You can disable this security feature by unchecking the 'do "
"not sync when screensaver is active' box in the HotSync page of the "
"configuration dialog."
msgstr ""
#: kpilot/pilotDaemon.cpp:1165 kpilot/pilotDaemon.cpp:1166
msgid "HotSync Completed.<br>"
msgstr "Senkronizasyon Tamamlandı.<br>"
#: kpilot/pilotDaemon.cpp:1274
#, c-format
msgid "Next sync is %1."
msgstr ""
#: kpilot/pilotDaemon.cpp:1298
msgid "Device to try first"
msgstr ""
#: kpilot/pilotDaemon.cpp:1299
msgid "Exit instead of complaining about bad configuration files"
msgstr ""
#: kpilot/pilotDaemon.cpp:1311
msgid "KPilot Daemon"
msgstr "KPilot Programı"
#: kpilot/pilotDaemon.cpp:1326
msgid "Developer"
msgstr "Geliştirici"
#: kpilot/todoEditor.cpp:48
msgid "To-do Editor"
msgstr "Yapılacak Ögesi Düzenleyici"
#: kpilot/todoWidget.cpp:174
msgid "There are still %1 to-do editing windows open."
msgstr ""
#: kpilot/todoWidget.cpp:178
#, c-format
msgid ""
"_n: There is still a to-do editing window open.\n"
"There are still %n to-do editing windows open."
msgstr ""
#: kpilot/todoWidget.cpp:218
msgid "<qt>Select the category of to-dos to display here.</qt>"
msgstr ""
#: kpilot/todoWidget.cpp:225
msgid "To-do Item"
msgstr "Yapılacak Ögesi"
#: kpilot/todoWidget.cpp:243
msgid ""
"<qt>This list displays all the to-dos in the selected category. Click on one "
"to display it to the right.</qt>"
msgstr ""
#: kpilot/todoWidget.cpp:247
msgid "To-do info:"
msgstr "Yapılacak bilgileri:"
#: kpilot/todoWidget.cpp:262
msgid "<qt>You can edit a to-do when it is selected.</qt>"
msgstr ""
#: kpilot/todoWidget.cpp:270
msgid "<qt>Add a new to-do to the to-do list.</qt>"
msgstr ""
#: kpilot/todoWidget.cpp:271
msgid ""
"<qt><i>Adding new to-dos is disabled by the 'internal editors' setting.</i></"
"qt>"
msgstr ""
#: kpilot/todoWidget.cpp:280
msgid "<qt>Delete the selected to-do from the to-do list.</qt>"
msgstr ""
#: kpilot/todoWidget.cpp:408
msgid ""
"You cannot add to-dos to the to-do list until you have done a HotSync at "
"least once to retrieve the database layout from your Pilot."
msgstr ""
#: kpilot/todoWidget.cpp:411
msgid "Cannot Add New To-do"
msgstr ""
#: lib/actionQueue.cpp:136
msgid ""
"The connection to the handheld was lost. Synchronization cannot continue."
msgstr ""
#: lib/actions.cpp:54
msgid "KPilot %1 HotSync starting...\n"
msgstr ""
#: lib/actions.cpp:56
msgid "Using encoding %1 on the handheld."
msgstr "El bilgisayarı üzerinde %1 kodlamasını kullan."
#: lib/actions.cpp:67
msgid "KPilot is busy and cannot process the HotSync right now."
msgstr ""
#: lib/actions.cpp:114
msgid "Testing.\n"
msgstr "Test ediliyor.\n"
#: lib/actions.cpp:130
msgid "Syncing database %1..."
msgstr "%1 veritabanı senkronize ediliyor"
#: lib/kpilotdevicelink.cpp:148
msgid "Could not open device: %1 (will retry)"
msgstr "%1 aygıtıılamadı (yeniden deneme yapılacak)"
#: lib/kpilotdevicelink.cpp:187
msgid "Trying to open device %1..."
msgstr "%1 aygıtıılıyor..."
#: lib/kpilotdevicelink.cpp:241
msgid "Already listening on that device"
msgstr ""
#: lib/kpilotdevicelink.cpp:261
msgid "Cannot create socket for communicating with the Pilot (%1)"
msgstr "Pilot (%1) ile iletişim kurmak için soket oluşturulamadı"
#: lib/kpilotdevicelink.cpp:289
msgid "Cannot open Pilot port \"%1\". "
msgstr "Pilot portu \"%1\" açılamadı. "
#: lib/kpilotdevicelink.cpp:391
msgid "Cannot listen on Pilot socket (%1)"
msgstr "Pilot üzerindeki soket (%1) dinlenemiyor"
#: lib/kpilotdevicelink.cpp:411 lib/kpilotdevicelink.cpp:426
msgid "Cannot accept Pilot (%1)"
msgstr "Pilot (%1) kabul edilemiyor"
#: lib/kpilotdevicelink.cpp:427
msgid "already connected"
msgstr ""
#: lib/kpilotdevicelink.cpp:441
msgid "Unable to read system information from Pilot"
msgstr "Pilot'tan sistem bilgisi okunamıyor"
#: lib/kpilotdevicelink.cpp:478
msgid "Checking last PC..."
msgstr "Son PC denetleniyor..."
#: lib/kpilotdevicelink.cpp:487
msgid ""
"Could not read user information from the Pilot. Perhaps you have a password "
"set on the device?"
msgstr ""
"Pilot aygıtındaki kullanıcı bilgisi okunamadı. Bu aygıt üzerinde bir "
"kullanıcı parolası tanımlanmış olabilir."
#: lib/kpilotdevicelink.cpp:670
msgid "The Pilot device is not configured yet."
msgstr "Pilot aygıtı henüz yapılandırılmadı."
#: lib/kpilotdevicelink.cpp:709
msgid "Pilot device %1 is not read-write."
msgstr "Pilot aygıtı %1 yazılabilir-okunabilir değil."
#: lib/kpilotdevicelink.cpp:719
msgid ""
"Pilot device %1 does not exist. Probably it is a USB device and will appear "
"during a HotSync."
msgstr ""
#: lib/kpilotdevicelink.cpp:765 lib/kpilotdevicelink.cpp:774
msgid "<qt>Cannot install the file &quot;%1&quot;.</qt>"
msgstr "<qt>&quot;%1&quot; dosyası yüklenemiyor.</qt>"
#: lib/kpilotdevicelink.cpp:846
msgid "End of HotSync\n"
msgstr ""
#: lib/kpilotdevicelinkPrivate.h:307
msgid " The port does not exist."
msgstr " Port bulunamadı."
#: lib/kpilotdevicelinkPrivate.h:310
#, fuzzy
msgid " There is no such device."
msgstr " Böyle bir aygıt yok."
#: lib/kpilotdevicelinkPrivate.h:313
#, fuzzy
msgid " You do not have permission to open the Pilot device."
msgstr " Pilot aygıtını açmak için yetkiye sahip değilsiniz."
#: lib/kpilotdevicelinkPrivate.h:317
msgid " Check Pilot path and permissions."
msgstr " Pilot patikasını ve yetkilerini kontrol edin."
#: lib/pilotDateEntry.cpp:179
#, c-format
msgid "Start date: %1"
msgstr "Başlangıç tarihi: %1"
#: lib/pilotDateEntry.cpp:185
msgid "Whole-day event"
msgstr "Tüm gün olayı"
#: lib/pilotDateEntry.cpp:193
#, c-format
msgid "End date: %1"
msgstr "Bitiş tarihi: %1"
#: lib/pilotDateEntry.cpp:200
msgid ""
"_: %1 is the duration, %2 is the time unit\n"
"Alarm: %1 %2 before event starts"
msgstr ""
#: lib/pilotDateEntry.cpp:204
msgid "minutes"
msgstr "dakika"
#: lib/pilotDateEntry.cpp:205
msgid "hours"
msgstr "saat"
#: lib/pilotDateEntry.cpp:206
msgid "days"
msgstr "gün"
#: lib/pilotDateEntry.cpp:216
msgid "Recurrence: every %1 %2"
msgstr "Tekrar: her %1 %2"
#: lib/pilotDateEntry.cpp:222
msgid "day(s)"
msgstr "günde bir"
#: lib/pilotDateEntry.cpp:223
msgid "week(s)"
msgstr "haftada bir"
#: lib/pilotDateEntry.cpp:225
msgid "month(s)"
msgstr "ayda bir"
#: lib/pilotDateEntry.cpp:226
msgid "year(s)"
msgstr "yılda bir"
#: lib/pilotDateEntry.cpp:235
msgid "Repeats indefinitely"
msgstr "Sonsuza kadar tekrar eder"
#: lib/pilotDateEntry.cpp:240
#, c-format
msgid "Until %1"
msgstr "Araç %1"
#: lib/pilotDateEntry.cpp:244
msgid "Repeating on the i-th day of week j"
msgstr ""
#: lib/pilotDateEntry.cpp:245
msgid "Repeating on the n-th day of the month"
msgstr ""
#: lib/pilotDateEntry.cpp:263
msgid "Exceptions:"
msgstr "İstisnalar:"
#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
msgid "<b><em>Note:</em></b><br>"
msgstr "<b><em>Not:</em></b><br>"
#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
msgid "Note:\n"
msgstr "Not:\n"
#: lib/pilotMemo.cpp:81
msgid ""
"<i>Title:</i> %1<br>\n"
"<i>MemoText:</i><br>%2"
msgstr ""
"<i>Başlık:</i> %1<br>\n"
"<i>Hatırlatma metni:</i><br>%2"
#: lib/pilotMemo.cpp:86
msgid ""
"Title: %1\n"
"MemoText:\n"
"%2"
msgstr ""
"Başlık: %1\n"
"Hafıza Metni:\n"
"%2"
#: lib/pilotTodoEntry.cpp:133
msgid "Completed"
msgstr "Tamamlanmış"
#: lib/pilotTodoEntry.cpp:135
msgid "Not completed"
msgstr "Tamamlanmamış"
#: lib/pilotTodoEntry.cpp:143
#, c-format
msgid "Due date: %1"
msgstr "Son tarih: %1"
#: lib/pilotTodoEntry.cpp:151
#, c-format
msgid "Priority: %1"
msgstr "Öncelik: %1"
#: lib/plugin.cpp:73
msgid "Unnamed"
msgstr "İsimsiz"
#: lib/plugin.cpp:93
msgid ""
"<qt>The <i>%1</i> conduit's settings have been changed. Do you want to save "
"the changes before continuing?</qt>"
msgstr ""
"<qt><i>%1</i> bağlantı ayarları değiştirildi. Devam etmeden önce "
"değişiklikleri saklamak ister misiniz?</qt>"
#: lib/plugin.cpp:105
msgid "%1 Conduit"
msgstr "%1 Bağlantısı"
#: lib/plugin.cpp:144
msgid "Send questions and comments to tdepim-users@kde.org"
msgstr "Soru ve yorumlarınızı tdepim-users@kde.org adresine gönderin"
#: lib/plugin.cpp:194
msgid "Send questions and comments to <a href=\"mailto:%1\">%2</a>."
msgstr "Soru ve yorumlarınızı <a href=\"mailto:%1\">%2</a> adresine gönderin."
#: lib/plugin.cpp:198
msgid "Send bug reports to <a href=\"mailto:%1\">%2</a>."
msgstr "Hata raporlarını <a href=\"mailto:%1\">%2</a> adresine gönderin."
#: lib/plugin.cpp:202
msgid ""
"For trademark information, see the <a href=\"help:/kpilot/trademarks.html"
"\">KPilot User's Guide</a>."
msgstr ""
"Ticari marka bilgisi için, <a href=\"help:/kpilot/trademarks.html\">KPilot "
"Kullanıcı Rehberi</a>'ne göz atın."
#: lib/plugin.cpp:213
msgid "<b>Authors:</b> "
msgstr "<b>Yazarlar:</b> "
#: lib/plugin.cpp:234
msgid "<b>Credits:</b> "
msgstr "<b>Destekleyenler:</b> "
#: lib/plugin.cpp:480
msgid "Large Changes Detected"
msgstr ""
#: lib/plugin.cpp:482
msgid ""
"The %1 conduit has made a large number of changes to your %2. Do you want "
"to allow this change?\n"
"Details:\n"
"\t%3"
msgstr ""
#: lib/plugin.cpp:536
#, c-format
msgid "Could not find conduit %1."
msgstr "%1 kanalı bulunamadı."
#: lib/plugin.cpp:559
#, c-format
msgid "Could not load conduit %1."
msgstr "%1 kanalı yüklenemedi."
#: lib/plugin.cpp:571
msgid "Conduit %1 has wrong version (%2)."
msgstr ""
#: lib/plugin.cpp:581
#, c-format
msgid "Could not initialize conduit %1."
msgstr "%1 kanalı başlatılamadı."
#: lib/plugin.cpp:594 lib/plugin.cpp:603
#, c-format
msgid "Could not create conduit %1."
msgstr "%1 kanalı oluşturulamadı."
#: lib/plugin.cpp:607
msgid "[Conduit %1]"
msgstr "[Kanal %1]"
#: lib/plugin.cpp:749
msgid "Start: %1. End: %2. "
msgstr "Başlangıç: %1. Bitiş: %2."
#: lib/plugin.cpp:751
msgid "%1 new. "
msgstr "%1 yeni."
#: lib/plugin.cpp:752
msgid "%1 changed. "
msgstr "%1 değiştirildi."
#: lib/plugin.cpp:753
msgid "%1 deleted. "
msgstr "%1 silindi."
#: lib/plugin.cpp:755
msgid "No changes made. "
msgstr "Değişiklik yapılmadı."
#: lib/recordConduit.cpp:69 lib/recordConduit.cpp:289
#, fuzzy
msgid "Unable to open the %1 database on the handheld."
msgstr "El bilgisayarı üzerindeki veritabanıılamadı."
#: lib/recordConduit.cpp:295
#, c-format
msgid "Unable to open %1."
msgstr "%1 açılamadı."
#: lib/syncAction.cpp:103
msgid "The conduit %1 could not be executed."
msgstr "%1 bağlantısı oluşturulamadı."
#: lib/syncAction.cpp:205
msgid "Full Synchronization"
msgstr ""
#: lib/syncAction.cpp:209
msgid "Restore From Backup"
msgstr ""
#: lib/syncAction.cpp:220
msgid "Test Sync"
msgstr "Test Eşzamanlaması"
#: lib/syncAction.cpp:224
msgid "Local Sync"
msgstr "Yerel Eşzamanlama"
#: lib/syncAction.cpp:316 lib/syncAction.cpp:428
msgid "Question"
msgstr "Soru"
#: lib/syncAction.cpp:335 lib/syncAction.cpp:448
msgid "&Do not ask again"
msgstr "&Tekrar sorma"
#: lib/syncAction.cpp:369 lib/syncAction.cpp:481
msgid "Do not ask again"
msgstr "Tekrar sorma"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:18
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:32
#, no-c-format
msgid "KPilot Custom Fields"
msgstr "KPilot Özel Alanları"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:35
#, no-c-format
msgid ""
"On your handheld, each address also provides four custom fields for your "
"personal use. KPilot can sync these either to birthdate, URL, IM address, or "
"just store them as a custom field on your PC with no special meaning. In the "
"last case, you can change the values here. Note, however, that for all other "
"settings the values entered here will have no effect."
msgstr ""
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:46
#, no-c-format
msgid "Custom &3:"
msgstr "Özel &3:"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:52
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:74
#, no-c-format
msgid ""
"<qt>Edit or enter the value of the third custom field here. Using KPilot, "
"you can synchronize these values with the handheld's Address application "
"custom fields.</qt>"
msgstr ""
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:60
#, no-c-format
msgid "Custom &4:"
msgstr "Özel &4:"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:66
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:90
#, no-c-format
msgid ""
"<qt>Edit or enter the value of the fourth custom field here. Using KPilot, "
"you can synchronize these values with the handheld's Address application "
"custom fields.</qt>"
msgstr ""
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:82
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:104
#, no-c-format
msgid ""
"<qt>Edit or enter the value of the second custom field here. Using KPilot, "
"you can synchronize these values with the handheld's Address application "
"custom fields.</qt>"
msgstr ""
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:98
#, no-c-format
msgid "Custom &2:"
msgstr "Özel &2:"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:112
#, no-c-format
msgid "Custom &1:"
msgstr "Özel &1:"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:118
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:134
#, no-c-format
msgid ""
"<qt>Edit or enter the value of the first custom field here. Using KPilot, "
"you can synchronize these values with the handheld's Address application "
"custom fields.</qt>"
msgstr ""
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:142
#, no-c-format
msgid ""
"If you let KPilot sync the handheld's custom fields as custom fields on the "
"PC, you can change the values here. Note, however, that for all other "
"settings the values entered here will have no effect."
msgstr ""
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:158
#, no-c-format
msgid "KPilot's Private (meta-sync) Settings"
msgstr ""
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:169
#, no-c-format
msgid "Record&ID:"
msgstr "Kayıt &No:"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:180
#, no-c-format
msgid "Sync &flag:"
msgstr ""
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:225
#, no-c-format
msgid ""
"These values indicate the state of the record for KPilot, and connect an "
"entry on the handheld with an entry on the PC.\n"
"Do NOT change these values: doing so will almost certainly result in data "
"loss when you next do a sync."
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:66
#: conduits/vcalconduit/korganizerConduit.ui:94
#, no-c-format
msgid "Sync Destination"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:77
#, no-c-format
msgid "&Standard addressbook"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:80
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with TDE's standard addressbook (i.e. "
"the addressbook that you edit in KAddressBook, and which you use in KMail)</"
"qt>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:91
#, no-c-format
msgid "vCard &file:"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:94
#, no-c-format
msgid ""
"<qt>Select this option to use a specific address book file, instead of the "
"standard TDE address book. This file must be in the vCard format (.vcf). "
"Type the location of this file in the edit box or select it clicking the "
"file picker button.</qt>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:113
#, no-c-format
msgid ""
"<qt>Enter the vCard file name here or select it by clicking the file picker "
"button. vCard is a standard format for exchanging contact information. </qt>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:123
#, no-c-format
msgid "Store &archived records in the TDE addressbook"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:126
#, no-c-format
msgid ""
"<qt>If you delete an address on your handheld, you can determine if it "
"should be archived on the PC. If you check that and this checkbox, the "
"address will be added to your addressbook, but no longer synchronized with "
"the handheld.</qt>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:136
#: conduits/docconduit/doc-setupdialog.ui:390
#: conduits/vcalconduit/korganizerConduit.ui:165
#, no-c-format
msgid "Conflicts"
msgstr "Çakışmalar"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:166
#: conduits/vcalconduit/korganizerConduit.ui:184
#: kpilot/kpilotConfigDialog_sync.ui:148
#, no-c-format
msgid "Conflict &resolution:"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:172
#: conduits/abbrowserconduit/kaddressbookConduit.ui:218
#, no-c-format
msgid ""
"<qt>Select in this list how conflicting entries (entries which were edited "
"both on your handheld and on the PC) are resolved. Possibly values are \"Use "
"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" "
"to allow the entries to be different, \"PC overrides\", \"Handheld overrides"
"\", \"Use values from last sync\" and \"Use both entries\" to create a new "
"entry on both the PC and handheld.</qt>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:178
#: conduits/vcalconduit/korganizerConduit.ui:193
#, no-c-format
msgid "Use KPilot's Global Setting"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:183
#: conduits/vcalconduit/korganizerConduit.ui:198
#: kpilot/kpilotConfigDialog_sync.ui:100
#, no-c-format
msgid "Ask User"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:188
#: conduits/vcalconduit/korganizerConduit.ui:203
#: kpilot/kpilotConfigDialog_sync.ui:105
#, no-c-format
msgid "Do Nothing"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:193
#: conduits/vcalconduit/korganizerConduit.ui:208
#: kpilot/kpilotConfigDialog_sync.ui:110
#, no-c-format
msgid "Handheld Overrides"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:198
#: conduits/vcalconduit/korganizerConduit.ui:213
#: kpilot/kpilotConfigDialog_sync.ui:115
#, no-c-format
msgid "PC Overrides"
msgstr "Üstüne Yaz"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:203
#: conduits/vcalconduit/korganizerConduit.ui:218
#: kpilot/kpilotConfigDialog_sync.ui:120
#, no-c-format
msgid "Values From Last Sync (if possible)"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:208
#: conduits/vcalconduit/korganizerConduit.ui:223
#: kpilot/kpilotConfigDialog_sync.ui:125
#, no-c-format
msgid "Use Both Entries"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:226
#, no-c-format
msgid ""
"<p>Select the default action if an event was modified on both sides here. </"
"p>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:258
#, no-c-format
msgid "Fields"
msgstr "Alanlar"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:275
#, no-c-format
msgid "Handheld other phone:"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:278
#: conduits/abbrowserconduit/kaddressbookConduit.ui:334
#, no-c-format
msgid ""
"<qt>Select which KAddressBook field should be used to store the Pilot's "
"&quot;Other&quot; phone here.</qt>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:284
#, no-c-format
msgid "Other Phone"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:289
#, no-c-format
msgid "Assistant"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:294
#: conduits/abbrowserconduit/kaddressbookConduit.ui:385
#, no-c-format
msgid "Business Fax"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:299
#, no-c-format
msgid "Car Phone"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:304
#, no-c-format
msgid "Email 2"
msgstr "E-posta 2"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:309
#: conduits/abbrowserconduit/kaddressbookConduit.ui:380
#, no-c-format
msgid "Home Fax"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:314
#, no-c-format
msgid "Telex"
msgstr "Telex"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:319
#, no-c-format
msgid "TTY/TTD Phone"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:342
#, no-c-format
msgid "Handheld street address:"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:345
#: conduits/abbrowserconduit/kaddressbookConduit.ui:363
#, no-c-format
msgid ""
"<qt>Select which KAddressBook field should be used to store the Pilot's "
"Street Address here.</qt>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:351
#, no-c-format
msgid "Preferred, then Home Address"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:356
#, no-c-format
msgid "Preferred, then Business Address"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:371
#, no-c-format
msgid "Handheld fax:"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:374
#: conduits/abbrowserconduit/kaddressbookConduit.ui:392
#, no-c-format
msgid ""
"<qt>Select which KAddressBook field should be used to store the Fax number "
"from the Pilot here.</qt>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:419
#, no-c-format
msgid "Custom Fields"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:438
#, no-c-format
msgid "Handheld custom field 1:"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:441
#: conduits/abbrowserconduit/kaddressbookConduit.ui:510
#, no-c-format
msgid ""
"<qt>Select the field from this list that represents best the meaning given "
"by your use of the first custom field on your handheld.</qt>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:449
#, no-c-format
msgid "Handheld custom field 2:"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:452
#: conduits/abbrowserconduit/kaddressbookConduit.ui:546
#, no-c-format
msgid ""
"<qt>Select the field from this list that represents best the meaning given "
"by your use of the second custom field on your handheld.</qt>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:460
#, no-c-format
msgid "Handheld custom field 3:"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:463
#: conduits/abbrowserconduit/kaddressbookConduit.ui:582
#, no-c-format
msgid ""
"<qt>Select the field from this list that represents best the meaning given "
"by your use of the third custom field on your handheld.</qt>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:471
#, no-c-format
msgid "Handheld custom field 4:"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:474
#: conduits/abbrowserconduit/kaddressbookConduit.ui:618
#, no-c-format
msgid ""
"<qt>Select the field from this list that represents best the meaning given "
"by your use of the fourth custom field on your handheld.</qt>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:480
#: conduits/abbrowserconduit/kaddressbookConduit.ui:516
#: conduits/abbrowserconduit/kaddressbookConduit.ui:552
#: conduits/abbrowserconduit/kaddressbookConduit.ui:588
#, no-c-format
msgid "Store as Custom Field"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:485
#: conduits/abbrowserconduit/kaddressbookConduit.ui:521
#: conduits/abbrowserconduit/kaddressbookConduit.ui:557
#: conduits/abbrowserconduit/kaddressbookConduit.ui:593
#, no-c-format
msgid "Birthdate"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:490
#: conduits/abbrowserconduit/kaddressbookConduit.ui:526
#: conduits/abbrowserconduit/kaddressbookConduit.ui:562
#: conduits/abbrowserconduit/kaddressbookConduit.ui:598
#, no-c-format
msgid "URL"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:495
#, no-c-format
msgid "IM Address (ICQ, MS, ...)"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:531
#: conduits/abbrowserconduit/kaddressbookConduit.ui:567
#: conduits/abbrowserconduit/kaddressbookConduit.ui:603
#, no-c-format
msgid "IM Address (ICQ, MSN, ...)"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:640
#, no-c-format
msgid "Date &format:"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:646
#: conduits/abbrowserconduit/kaddressbookConduit.ui:700
#, no-c-format
msgid ""
"<qt>Select the birthdate format here, if you selected \"birthdate\" for any "
"of the custom fields above. Possible placeholders are:<br> %d for the day, "
"%m for the month, %y for the two-digit year, %Y for the four-digit year. "
"For example, %d.%m.%Y would generate a date like 27.3.1952, while %m/%d/%y "
"would write the same date as 03/27/52. </qt>"
msgstr ""
#: conduits/abbrowserconduit/kaddressbookConduit.ui:652
#, no-c-format
msgid "Locale Settings"
msgstr "Yerel dil ayarları"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:657
#, no-c-format
msgid "%d.%m.%Y"
msgstr "%d.%m.%Y"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:662
#, no-c-format
msgid "%d.%m.%y"
msgstr "%d.%m.%y"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:667
#, no-c-format
msgid "%d/%m/%Y"
msgstr "%d/%m/%Y"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:672
#, no-c-format
msgid "%d/%m/%y"
msgstr "%d/%m/%y"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:677
#, no-c-format
msgid "%m/%d/%Y"
msgstr "%m/%d/%Y"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:682
#, no-c-format
msgid "%m/%d/%y"
msgstr "%m/%d/%y"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:16
#, no-c-format
msgid "widget2"
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog_base.ui:27
#, no-c-format
msgid ""
"The following record was edited both on the handheld and on the PC. Please "
"choose which values shall be synced:"
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog_base.ui:36
#, no-c-format
msgid "Field"
msgstr "Alan"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:55
#, no-c-format
msgid ""
"<qt>Use this list to resolve, field by field, the conflicts created when a "
"record was edited both on the handheld and on the PC. For each record, the "
"different values from the last sync, the handheld and PC are displayed for "
"each field, allowing you to choose the desired value.</qt>"
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog_base.ui:63
#, no-c-format
msgid ""
"Line breaks in any of the entries are denoted by a \" | \" (without the "
"quotes)."
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog_base.ui:85
#, no-c-format
msgid "&Keep Both"
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog_base.ui:88
#, no-c-format
msgid ""
"<qt>Click this button to use both values, resulting in the duplication of "
"the record.</qt>"
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog_base.ui:96
#, no-c-format
msgid "&PC Values"
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog_base.ui:99
#, no-c-format
msgid ""
"<qt>Click this button to use the PC values for synchronizing all conflicting "
"fields in this record.</qt>"
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog_base.ui:107
#, no-c-format
msgid "&Last Sync Values"
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog_base.ui:110
#, no-c-format
msgid ""
"<qt>Click this button to use the last sync values (old values) for "
"synchronizing all conflicting fields in this record.</qt>"
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog_base.ui:118
#, no-c-format
msgid "&Handheld Values"
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog_base.ui:121
#, no-c-format
msgid ""
"<qt>Click this button to use the handheld values for synchronizing all "
"conflicting fields in this record.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:54
#, no-c-format
msgid "&Text files:"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:60
#: conduits/docconduit/doc-setupdialog.ui:82
#, no-c-format
msgid ""
"<qt>Enter here, or select clicking the file picker button, the name and "
"location of the folder used to find and synchronize text files. All files "
"with extension .txt located in this folder will be synced to Palm DOC "
"databases in your handheld.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:68
#, no-c-format
msgid "Local co&py:"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:74
#, no-c-format
msgid ""
"<qt>Check this box if you want to save a copy of the Palm DOC databases (."
"pdb files) on your PC.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:90
#, no-c-format
msgid "Synchronization Mode"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:107
#, no-c-format
msgid "Sync only P&C to PDA"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:113
#, no-c-format
msgid ""
"<qt>Select this option to synchronize texts changed in your PC to Palm DOC "
"databases in your handheld. Palm DOC databases modified in the handheld will "
"not be converted to text files, but texts changed in the PC will be "
"converted to the Palm DOC databases.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:121
#, no-c-format
msgid "Sync only P&DA to PC"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:124
#, no-c-format
msgid ""
"<qt>Select this option to synchronize the changes made to Palm DOC databases "
"in your handheld to the PC text files. Palm DOC databases modified in the "
"handheld will be converted to text files, but texts changed in the PC will "
"not be converted to the Palm DOC databases.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:132
#, no-c-format
msgid "Sync &all"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:141
#, no-c-format
msgid ""
"<qt>Select this option to synchronize the file texts in your PC to Palm DOC "
"databases in your handheld. Palm DOC databases modified in the handheld will "
"be converted to text files, and texts changed in the PC will be converted to "
"the Palm DOC databases, keeping both versions in sync.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:168
#, no-c-format
msgid ""
"<qt>Enter here, or select clicking the file picker button, the name and "
"location of the folder where copies of the handheld databases are kept (.pdb "
"files). Local copies are only made if the box is checked as well.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:178
#: conduits/docconduit/kpalmdoc_dlgbase.ui:168
#, no-c-format
msgid "PC -> Handheld"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:189
#: conduits/docconduit/kpalmdoc_dlgbase.ui:255
#, no-c-format
msgid "&Compress"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:195
#: conduits/docconduit/kpalmdoc_dlgbase.ui:261
#, no-c-format
msgid ""
"Check this box, if the text should be compressed on the handheld to save "
"memory. Most doc reader on the handheld support compressed texts."
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:198
#, no-c-format
msgid ""
"<qt>The Palm DOC format supports compressing the text to save memory. Check "
"this box to enable text compression, so the resulting Palm DOC database will "
"consume about 50% less memory than in uncompressed state. Almost all DOC "
"readers on the Palm support compressed texts.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:206
#: conduits/docconduit/kpalmdoc_dlgbase.ui:272
#, no-c-format
msgid "Convert &bookmarks"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:212
#, no-c-format
msgid ""
"<qt>Check this box to enable bookmark creation when converting text files to "
"Palm DOC databases. Most doc readers support bookmarks. In order to create a "
"bookmark, it is necessary to to provide the location in the text where the "
"bookmark should be set and the bookmark title, in at least one of the "
"formats listed below.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:237
#: conduits/docconduit/kpalmdoc_dlgbase.ui:230
#, no-c-format
msgid "&Inline tags in text"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:243
#, no-c-format
msgid ""
"Check this box to create bookmarks from inline tags in the text. The inline "
"tag consist of tags in the form <* bookmarktext *>. The bookmark location is "
"set using the location of the inline tag in the text, and the name is the "
"text between the <* and the *>. The inline tag (<*...*>) will be removed "
"from the text."
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:251
#: conduits/docconduit/kpalmdoc_dlgbase.ui:155
#, no-c-format
msgid "&Encoding:"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:262
#: conduits/docconduit/kpalmdoc_dlgbase.ui:244
#, no-c-format
msgid "&Tags at end of text"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:265
#, no-c-format
msgid ""
"Check this box to convert tags of the form <bookmarkname> at the end of the "
"text to bookmarks. The text inside the tag (\"bookmarkname\") will be "
"searched in the text, and whenever found, a bookmark will be set there. The "
"endtags <...> will then be removed from the end of the text."
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:273
#: conduits/docconduit/kpalmdoc_dlgbase.ui:286
#, no-c-format
msgid "Regular &expressions in .bmk file"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:276
#, no-c-format
msgid ""
"<qt>Check this box to use regular expressions in a file to search the text "
"for bookmarks. The file should have the same name as the text file, but "
"should end in .bmk instead of .txt (for instance, the regular expression "
"file for textname.txt should be textname.bmk). See the documentation for a "
"description of the format of the bmk file.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:291
#: conduits/docconduit/kpalmdoc_dlgbase.ui:316
#, no-c-format
msgid "Handheld -> PC"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:319
#, no-c-format
msgid "Do not convert, if text unchanged (only bookmarks)"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:322
#, no-c-format
msgid ""
"<qt>Check this box to avoid syncing the text on the handheld to the PC if "
"you only changed the bookmarks on the handheld (but not the text).</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:330
#: conduits/docconduit/kpalmdoc_dlgbase.ui:344
#, no-c-format
msgid "Convert Bookmarks"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:341
#: conduits/docconduit/kpalmdoc_dlgbase.ui:372
#, no-c-format
msgid "Do &not convert bookmarks"
msgstr "Yer imlerini &dönüştürme"
#: conduits/docconduit/doc-setupdialog.ui:347
#, no-c-format
msgid ""
"<qt>Check this box to avoid converting Palm DOC bookmarks to inline tags or "
"to a bookmark file.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:355
#, no-c-format
msgid "Convert into .bm &file"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:364
#, no-c-format
msgid ""
"<qt>Check this box to convert the Palm DOC database bookmarks to a separate "
"file, in the bmk format (see more about this format in the documentation). "
"The resulting bookmark file shares the same filename as the resulting .txt "
"file, but ends in .bmk instead. This approach creates a clean text file and "
"a bookmark file.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:372
#: conduits/docconduit/kpalmdoc_dlgbase.ui:358
#, no-c-format
msgid "Convert as &inline tags"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:378
#, no-c-format
msgid ""
"<qt>Check this box to convert the Palm DOC database bookmarks to inline "
"tags, in the form &lt;* BookmarkName *&gt;. These tags are inserted in the "
"text in the position marked by the bookmark, and the text inside the tag "
"corresponds to the bookmark name. Inline tags are easy to create, delete, "
"move and edit.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:404
#, no-c-format
msgid ""
"If the same text was changed on the PC and the handheld, which of the two "
"versions should be used as the new version?"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:407
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a "
"text is changed both in the handheld and in the computer. Therefore, the "
"choice is between working with the files out of sync, or discarding the "
"changes in one of them.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:418
#, no-c-format
msgid "&No resolution"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:424
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a "
"text is changed both in the handheld and in the computer. Therefore, when "
"conflicts appear, the choice is between working with the files out of sync, "
"or discarding the changes in one of them. Select this option to prevent "
"KPilot from overwriting your modifications.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:432
#, no-c-format
msgid "P&DA overrides"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:438
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a "
"text is changed both in the handheld and in the computer. Therefore, when "
"conflicts appear, the choice is between working with the files out of sync, "
"or discarding the changes in one of them. Select this option to make the PDA "
"version overwrite the PC version in case of conflict.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:446
#, no-c-format
msgid "P&C overrides"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:452
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a "
"text is changed both in the handheld and in the computer. Therefore, when "
"conflicts appear, the choice is between working with the files out of sync, "
"or discarding the changes in one of them. Select this option to make the PC "
"version overwrite the PDA version in case of conflict.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:460
#, no-c-format
msgid "&Ask the user"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:469
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a "
"text is changed both in the handheld and in the computer. Therefore, when "
"conflicts appear, the choice is between working with the files out of sync, "
"or discarding the changes in one of them. Select this option to show the "
"resolution dialog to let the user decide on a case by case basis.</qt>"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:479
#, no-c-format
msgid "&Always show the resolution dialog"
msgstr ""
#: conduits/docconduit/doc-setupdialog.ui:482
#, no-c-format
msgid ""
"<qt>Check this box to force the resolution dialog to appear even when there "
"are no conflicts.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:47
#, no-c-format
msgid "&PalmDOC file:"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:77
#, no-c-format
msgid "Convert whole &folders"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:85
#, no-c-format
msgid ""
"Folder where copies of the handheld databases are kept. You can install them "
"to any PalmOS handheld, and distribute these copies to other people (but "
"beware of copyright infringement)."
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:93
#, no-c-format
msgid "&Ask before overwriting files"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:101
#, no-c-format
msgid "&Verbose messages"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:109
#, no-c-format
msgid "Convert Text to PalmDOC"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:117
#, no-c-format
msgid "Convert PalmDOC to Text"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:142
#, no-c-format
msgid ""
"Enter the name of the folder where the text files reside on the PC. All "
"files with extension .txt will be synced to the handheld."
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:236
#, no-c-format
msgid ""
"When a <* bookmarktext *> appears somewhere in the text, a bookmark will be "
"set at this position, and the text between the <* and the *> will be used as "
"bookmark name. The <*...*> will be removed from the text."
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:247
#, no-c-format
msgid ""
"Tags of the form <bookmarkname> at the end of the text will be used to "
"search the text for the pattern between the < and >. Whenever \"bookmarkname"
"\" appears in the text, a bookmark will be set there. The endtags <...> will "
"then be removed from the end of the text."
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:264
#, no-c-format
msgid ""
"The Palm doc format supports compressing the text to save memory. If you "
"check this box, the text will consume about 50% less memory than in "
"uncompressed state. Almost all DOC readers on the Palm support compressed "
"texts."
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:278
#, no-c-format
msgid ""
"Do you want to convert bookmarks? Most doc readers support bookmarks. You "
"have to provide some information about where the bookmarks should be set and "
"their titles. Check at least one of the bookmark types below."
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:289
#, no-c-format
msgid ""
"Use regular expressions in a file textname.bmk (textname.txt is the filename "
"of the text) to search the text for bookmarks.See the documentation for a "
"description of the format of the bmk file."
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:386
#, no-c-format
msgid "Convert as &end tags"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlgbase.ui:394
#, no-c-format
msgid "Convert into .bmk &file"
msgstr ""
#: conduits/knotes/knotesconduit.kcfg:12
#, no-c-format
msgid "Suppress the confirmation KNotes normally shows when deleting a note."
msgstr ""
#: conduits/knotes/knotesconduit.kcfg:17
#, no-c-format
msgid "list of the synced MemoDB records"
msgstr ""
#: conduits/knotes/knotesconduit.kcfg:21
#, no-c-format
msgid "list of the corresponding KNotes note IDs"
msgstr ""
#: conduits/knotes/setup_base.ui:45
#, no-c-format
msgid "Delete KNote when Pilot memo is deleted"
msgstr ""
#: conduits/knotes/setup_base.ui:51
#, no-c-format
msgid ""
"<qt>Check this box if you wish to delete notes from KNotes automatically "
"when the corresponding Pilot memo is deleted. Use this option with care, as "
"the notes you want to keep in the handheld and in the desktop are not "
"necessarily the same.</qt>"
msgstr ""
#: conduits/knotes/setup_base.ui:59
#, no-c-format
msgid "Suppress delete-confirmation in KNotes"
msgstr ""
#: conduits/knotes/setup_base.ui:62
#, no-c-format
msgid ""
"<qt>Check this box if you wish to delete notes from KNotes, without "
"confirmation, when the corresponding Pilot memo is deleted. Use this option "
"only if you want to keep the same notes in the handheld and in the PC.</qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:49
#, no-c-format
msgid "Sync"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:52
#, no-c-format
msgid "Select how often AvantGo should be synchronised"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:72
#, no-c-format
msgid "&Every sync"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:78
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync. "
"To perform a successful synchronization, you need to have access to the MAL "
"server during the HotSync.</qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:86
#, no-c-format
msgid "Once per &hour"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:92
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync "
"that is at least one hour after the previous MAL sync. To perform a "
"successful synchronization, you need to have access to the MAL server during "
"the HotSync.</qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:100
#, no-c-format
msgid "Once a &day"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:103
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync "
"that is at least one day after the previous MAL sync. To perform a "
"successful synchronization, you need to have access to the MAL server during "
"the HotSync.</qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:111
#, no-c-format
msgid "Once a &week"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:114
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync "
"that is at least one week after the previous MAL sync. To perform a "
"successful synchronization, you need to have access to the MAL server during "
"the HotSync.</qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:122
#, no-c-format
msgid "Once a &month"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:125
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync "
"that is at least one month after the previous MAL sync. To perform a "
"successful synchronization, you need to have access to the MAL server during "
"the HotSync.</qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:154
#, no-c-format
msgid "Proxy"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:168
#, no-c-format
msgid "Proxy Type"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:185
#, no-c-format
msgid "&No proxy"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:191
#, no-c-format
msgid ""
"<qt>Select this option if you do not want KPilot to use a proxy server. Use "
"this option if you connect to the internet directly.</qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:199
#, no-c-format
msgid "&HTTP proxy"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:202
#, no-c-format
msgid "<qt>Select this option if you want KPilot to use a HTTP proxy.</qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:210
#, no-c-format
msgid "&SOCKS proxy"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:213
#, no-c-format
msgid "<qt>Select this option if you want KPilot to use a SOCKS proxy.</qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:226
#, no-c-format
msgid "Server Information"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:260
#: conduits/malconduit/mal-setup_dialog.ui:462
#, no-c-format
msgid "Custom &port:"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:263
#, no-c-format
msgid "Check this box to use a non-standard proxy port."
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:271
#, no-c-format
msgid "Ser&ver name:"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:277
#: conduits/malconduit/mal-setup_dialog.ui:285
#, no-c-format
msgid ""
"<qt>If you selected HTTP or SOCKS proxy, type the address of the proxy "
"server to use here, in the form <i>foo.bar.com</i> (not <i>http://foo.bar."
"com</i> or <i>http://foo.bar.com:8080</i>).</qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:305
#, no-c-format
msgid ""
"<qt>Enter the port you want KPilot to use when connecting to your proxy "
"server here.</qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:316
#, no-c-format
msgid ""
"<qt>If your proxy requires authentication, enter your password here.</qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:324
#: conduits/malconduit/mal-setup_dialog.ui:349
#, no-c-format
msgid ""
"<qt>If your proxy requires authentication, enter your username here.</qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:332
#: conduits/malconduit/mal-setup_dialog.ui:514
#, no-c-format
msgid "&Password:"
msgstr "&Parola:"
#: conduits/malconduit/mal-setup_dialog.ui:343
#: conduits/malconduit/mal-setup_dialog.ui:525
#, no-c-format
msgid "&User name:"
msgstr "K&ullanıcı adı:"
#: conduits/malconduit/mal-setup_dialog.ui:371
#: conduits/malconduit/mal-setup_dialog.ui:385
#, no-c-format
msgid ""
"<qt>Enter a list of MAL servers that do not need the use of a proxy here, "
"separated with commas, e.g: <br><i>localhost,127.0.0.1,.lan</i><qt>"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:379
#, no-c-format
msgid "N&o proxy for:"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:414
#, no-c-format
msgid "MAL Server"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:434
#, no-c-format
msgid "MAL Server Information"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:451
#, no-c-format
msgid "&MAL server name:"
msgstr ""
#: conduits/malconduit/mal-setup_dialog.ui:574
#, no-c-format
msgid ""
"<qt>There is currently <b>no way to set server parameters on the desktop</"
"b>; you need to use the <i>MobileLink</i> or <i>AGConnect</i> application on "
"the handheld device. </qt>"
msgstr ""
#: conduits/memofileconduit/memofileconduit.kcfg:6
#, no-c-format
msgid "What directory do you want to sync your PDA's memos with?"
msgstr ""
#: conduits/memofileconduit/memofileconduit.kcfg:10
#, no-c-format
msgid "Do you want to sync your private records to the filesystem?"
msgstr ""
#: conduits/memofileconduit/setup_base.ui:33
#, no-c-format
msgid "Memofile Conduit Options"
msgstr ""
#: conduits/memofileconduit/setup_base.ui:96
#, no-c-format
msgid "Sync private records:"
msgstr ""
#: conduits/memofileconduit/setup_base.ui:104
#, no-c-format
msgid "Memos directory:"
msgstr ""
#: conduits/memofileconduit/setup_base.ui:115
#, no-c-format
msgid "Select the directory you want to store your PDA's memos in"
msgstr ""
#: conduits/notepadconduit/notepad-setup.ui:17
#, no-c-format
msgid "Path to the directory to which the pictures should be exported."
msgstr ""
#: conduits/notepadconduit/notepad-setup.ui:65
#, no-c-format
msgid "Output:"
msgstr "Çıktı:"
#: conduits/notepadconduit/notepadconduit.kcfg:9
#, no-c-format
msgid "The export directory for the notepad drawings"
msgstr ""
#: conduits/null/nullconduit.kcfg:9 conduits/recordconduit/settings.kcfg:13
#, no-c-format
msgid "The error message if the null conduit is supposed to fail"
msgstr ""
#: conduits/null/setup_base.ui:33 conduits/recordconduit/setup_base.ui:33
#, no-c-format
msgid "Null-Conduit Options"
msgstr ""
#: conduits/null/setup_base.ui:85 conduits/recordconduit/setup_base.ui:85
#, no-c-format
msgid "KPilot was here."
msgstr "KPilot buradaydı."
#: conduits/null/setup_base.ui:88 conduits/recordconduit/setup_base.ui:88
#, no-c-format
msgid "<qt>Enter the message to add to the Sync Log on your Pilot here.</qt>"
msgstr ""
#: conduits/null/setup_base.ui:96 conduits/recordconduit/setup_base.ui:96
#, no-c-format
msgid "&Log message:"
msgstr "&Günlük iletisi:&Günlük iletisi:"
#: conduits/popmail/popmail.kcfg:9
#, no-c-format
msgid "Selects the way in which mail is sent: none (0), kmail (1)."
msgstr ""
#: conduits/popmail/popmail.kcfg:13
#, no-c-format
msgid "The email address entered in the To: field of outgoing messages."
msgstr ""
#: conduits/popmail/popmail.kcfg:17
#, no-c-format
msgid "The pathname of your .signature file."
msgstr ""
#: conduits/popmail/popmail.kcfg:21
#, no-c-format
msgid "The name of KMail's outbox - use with caution."
msgstr ""
#: conduits/popmail/setup-dialog.ui:34
#, no-c-format
msgid "Send Mail"
msgstr "İletiyi Gönder"
#: conduits/popmail/setup-dialog.ui:62
#, no-c-format
msgid "Send method:"
msgstr ""
#: conduits/popmail/setup-dialog.ui:65 conduits/popmail/setup-dialog.ui:127
#, no-c-format
msgid ""
"<qt>Select the method KPilot will use to send the mail from your Handheld to "
"the recipients here. Depending on the method you choose, the other fields in "
"the dialog may be enabled or disabled. Currently, the only <i>working</i> "
"method is through KMail.</qt>"
msgstr ""
#: conduits/popmail/setup-dialog.ui:73
#, no-c-format
msgid "Email address:"
msgstr "E-posta adresi:"
#: conduits/popmail/setup-dialog.ui:76 conduits/popmail/setup-dialog.ui:87
#, no-c-format
msgid "<qt>Enter the email address you want to send messages as here.</qt>"
msgstr ""
#: conduits/popmail/setup-dialog.ui:84
#, no-c-format
msgid "$USER"
msgstr ""
#: conduits/popmail/setup-dialog.ui:95
#, no-c-format
msgid "Signature file:"
msgstr ""
#: conduits/popmail/setup-dialog.ui:98 conduits/popmail/setup-dialog.ui:106
#, no-c-format
msgid ""
"<qt>If you want to add a signature file, enter the location of your "
"signature file (usually, <i>.signature</i>, located in your home folder) "
"here, or select it clicking the file picker button. The signature file "
"contains the text that is added to the end of your outgoing mail messages.</"
"qt>"
msgstr ""
#: conduits/popmail/setup-dialog.ui:112
#, no-c-format
msgid "Do Not Send Mail"
msgstr "İletiyi gönderme"
#: conduits/popmail/setup-dialog.ui:117
#, no-c-format
msgid "Use KMail"
msgstr "KMail kullan"
#: conduits/recordconduit/settings.kcfg:9
#, no-c-format
msgid "Whether the conduit should immediately bail out with an error"
msgstr ""
#: conduits/recordconduit/settings.kcfg:17
#, no-c-format
msgid "Databases that are skipped on sync"
msgstr ""
#: conduits/recordconduit/setup_base.ui:107
#, no-c-format
msgid "&Databases:"
msgstr "&Veritabanları:"
#: conduits/recordconduit/setup_base.ui:118
#, no-c-format
msgid ""
"<qt>The Null-conduit can be attached to several databases, effectively "
"preventing them from Syncing. Enter the database names here.</qt>"
msgstr ""
#: conduits/recordconduit/setup_base.ui:143
#, no-c-format
msgid "Simulate failure"
msgstr ""
#: conduits/recordconduit/setup_base.ui:146
#, no-c-format
msgid "Force the conduit to simulate a failure to perform the HotSync."
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:63
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:77
#, no-c-format
msgid ""
"<qt>Enter here, or select by clicking the file picker button, the location "
"and file name of the output file used to store the handheld's system "
"information.</qt>"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:71
#, no-c-format
msgid "Output &file:"
msgstr "Çıktı &dosyası:"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:85
#, no-c-format
msgid "Type of Output"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:96
#, no-c-format
msgid "&HTML"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:102
#, no-c-format
msgid ""
"<qt>Select this option to output the system information data as a HTML "
"document.</qt>"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:110
#, no-c-format
msgid "Te&xt file"
msgstr "&Metin dosyası"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:113
#, no-c-format
msgid ""
"<qt>Select this option to output the system information data as a text "
"document.</qt>"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:124
#, no-c-format
msgid ""
"<qt>Enter here, or select by clicking on the file picker button, the "
"location of the template to be used if you select the Custom template option."
"</qt>"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:132
#, no-c-format
msgid "&Custom template:"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:135
#, no-c-format
msgid ""
"<qt>Select this option to output the system information data as defined by a "
"custom template. Enter the location of the template in the edit box, or "
"select it clicking on the file picker button.</qt>"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:147
#, no-c-format
msgid "Parts Included"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:173
#, no-c-format
msgid "Output Type"
msgstr "Çıktı Türü"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:189
#, no-c-format
msgid ""
"<qt>Check on this list the types of information about your system and "
"handheld you want to display in the output file.</qt>"
msgstr ""
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:23
#, no-c-format
msgid "Debug information (for KPilot developers)"
msgstr "Hata ayıklama bilgisi (KPilot geliştiricileri için)"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:27
#, fuzzy, no-c-format
msgid "Hardware information"
msgstr "Veritabanı bilgisi"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:31
#, no-c-format
msgid "List of databases on handheld (takes long!)"
msgstr "Avuçiçi'ndeki veritabanlarının listesi (uzun zaman alır!)"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:35
#, fuzzy, no-c-format
msgid "Memory information"
msgstr "Kullanıcı Bilgisi"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:39
#, no-c-format
msgid "Number of addresses, todos, events and memos"
msgstr "Adreslerin, yapılacakların, olayların ve hafızaların sayısı"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:43
#, fuzzy, no-c-format
msgid "PalmOS version"
msgstr "PalmOS Sürümü"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:47
#, no-c-format
msgid "Storage info (SD card, memory stick, ...)"
msgstr "Saklama bilgisi (SD kartı, hafıza çubuğu, ...)"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:51
#, fuzzy, no-c-format
msgid "Synchronization information"
msgstr "KPilot Yapılandırma bilgilerini göster"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:55
#, no-c-format
msgid "User information"
msgstr "Kullanıcı Bilgisi"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:59
#, fuzzy, no-c-format
msgid "Version of KPilot, pilot-link and TDE"
msgstr "Kpilot, pilot-link ve TDE sürümü"
#: conduits/timeconduit/time-setup_dialog.ui:63
#, no-c-format
msgid "Direction"
msgstr ""
#: conduits/timeconduit/time-setup_dialog.ui:80
#, no-c-format
msgid "Set the &handheld time from the time on the PC"
msgstr ""
#: conduits/timeconduit/time-setup_dialog.ui:86
#, no-c-format
msgid ""
"<qt>Select this option to synchronize the handheld time with the PC time, by "
"using the PC time on both.</qt>"
msgstr ""
#: conduits/timeconduit/time-setup_dialog.ui:97
#, no-c-format
msgid "Set the &PC time from the time on the handheld"
msgstr ""
#: conduits/timeconduit/time-setup_dialog.ui:100
#, no-c-format
msgid ""
"<qt>Select this option to synchronize the handheld time with the PC time, by "
"using the handheld time on both.</qt>"
msgstr ""
#: conduits/timeconduit/time-setup_dialog.ui:110
#, no-c-format
msgid ""
"<qt>PalmOS Version 3.25 and 3.3 do not support setting the system time, so "
"this conduit will be skipped for handhelds that run either of these "
"operating systems.</qt>"
msgstr ""
#: conduits/vcalconduit/korganizerConduit.ui:31
#, no-c-format
msgid "Calendar-Conduit Options"
msgstr ""
#: conduits/vcalconduit/korganizerConduit.ui:105
#, no-c-format
msgid "&Standard calendar"
msgstr ""
#: conduits/vcalconduit/korganizerConduit.ui:108
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the calendar specified by the TDE "
"calendar settings.</qt>"
msgstr ""
#: conduits/vcalconduit/korganizerConduit.ui:119
#, no-c-format
msgid "Calendar &file:"
msgstr ""
#: conduits/vcalconduit/korganizerConduit.ui:122
#, no-c-format
msgid ""
"<qt>Select this option to use a specific calendar file, instead of the "
"standard TDE calendar. This file must be in the in the vCalendar or "
"iCalendar format. Enter the location of this file in the edit box or select "
"it clicking the file picker button.</qt>"
msgstr ""
#: conduits/vcalconduit/korganizerConduit.ui:141
#, no-c-format
msgid ""
"<qt>Enter here the location and filename of the calendar file or select it "
"clicking the file picker button. This file must be in the iCalendar or "
"vCalendar format.</qt>"
msgstr ""
#: conduits/vcalconduit/korganizerConduit.ui:151
#, no-c-format
msgid "Store &archived records in the TDE calendar"
msgstr ""
#: conduits/vcalconduit/korganizerConduit.ui:154
#, no-c-format
msgid ""
"When this box is checked, archived records will still\n"
"be saved in the calendar on the PC."
msgstr ""
#: conduits/vcalconduit/korganizerConduit.ui:233
#, no-c-format
msgid ""
"<qt>Select in this list how conflicting entries (entries which were edited "
"both on your handheld and on the PC) are resolved. Possibly values are \"Use "
"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" "
"to allow the entries to be different, \"PC overrides\", \"Handheld overrides"
"\", \"Use values from last sync\" and \"Use both entries\" to create a new "
"entry on both the PC and handheld. Note that this does <i>not</i> handle "
"double-scheduling conflicts.</qt>"
msgstr ""
#: kpilot/dbFlagsEditor_base.ui:32
#, no-c-format
msgid "Database &name:"
msgstr "&Veritabanı adı:"
#: kpilot/dbFlagsEditor_base.ui:51
#, no-c-format
msgid "&Creator:"
msgstr "&Oluşturan:"
#: kpilot/dbFlagsEditor_base.ui:70
#, no-c-format
msgid "&Type:"
msgstr "&Tür:"
#: kpilot/dbFlagsEditor_base.ui:97
#, no-c-format
msgid "Database Flags"
msgstr "Veri Tabanı Bayrakları"
#: kpilot/dbFlagsEditor_base.ui:108
#, no-c-format
msgid "&Ressource database"
msgstr "&Kaynak veritabanı"
#: kpilot/dbFlagsEditor_base.ui:116
#, no-c-format
msgid "Rea&d-only"
msgstr "&Salt-oku"
#: kpilot/dbFlagsEditor_base.ui:124
#, no-c-format
msgid "Database is &backed up"
msgstr "Veritabanı &yedeklendi"
#: kpilot/dbFlagsEditor_base.ui:132
#, no-c-format
msgid "Copy &protected"
msgstr "&Kopyalama korumalı"
#: kpilot/dbFlagsEditor_base.ui:159
#, no-c-format
msgid "Misc Flags"
msgstr ""
#: kpilot/dbFlagsEditor_base.ui:187
#, no-c-format
msgid "Reset after &installation"
msgstr "&Kurulumdan sonra yeniden başlat"
#: kpilot/dbFlagsEditor_base.ui:195
#, no-c-format
msgid "E&xclude from sync"
msgstr ""
#: kpilot/dbFlagsEditor_base.ui:205
#, no-c-format
msgid "Time Stamps"
msgstr "Zaman Etiketleri"
#: kpilot/dbFlagsEditor_base.ui:224
#, no-c-format
msgid "Cr&eation time:"
msgstr "Y&aratılma zamanı:"
#: kpilot/dbFlagsEditor_base.ui:235
#, no-c-format
msgid "&Modification time:"
msgstr "&Değiştirme zamanı:"
#: kpilot/dbFlagsEditor_base.ui:246
#, no-c-format
msgid "Back&up time:"
msgstr "&Yedekleme zamanı:"
#: kpilot/dbRecordEditor_base.ui:89
#, no-c-format
msgid "&Deleted"
msgstr "&Silindi"
#: kpilot/dbRecordEditor_base.ui:97
#, no-c-format
msgid "Busy"
msgstr "Meşgul"
#: kpilot/dbSelection_base.ui:23
#, no-c-format
msgid "Database"
msgstr "Veritabanı"
#: kpilot/dbSelection_base.ui:60
#, no-c-format
msgid "&Add"
msgstr "&Ekle"
#: kpilot/kpilot.kcfg:10 kpilot/kpilot.kcfg:15 kpilot/kpilot.kcfg:20
#: kpilot/kpilot.kcfg:26 kpilot/kpilot.kcfg:31 kpilot/kpilot.kcfg:36
#: kpilot/kpilot.kcfg:41 kpilot/kpilot.kcfg:55 kpilot/kpilot.kcfg:60
#: kpilot/kpilot.kcfg:65 kpilot/kpilot.kcfg:70 kpilot/kpilot.kcfg:75
#: kpilot/kpilot.kcfg:82 kpilot/kpilot.kcfg:87 kpilot/kpilot.kcfg:92
#: kpilot/kpilot.kcfg:100 kpilot/kpilot.kcfg:105 kpilot/kpilot.kcfg:114
#: kpilot/kpilot.kcfg:127 kpilot/kpilot.kcfg:132 kpilot/kpilot.kcfg:150
#: kpilot/kpilot.kcfg:158 kpilot/kpilot.kcfg:162 kpilot/kpilot.kcfg:166
#: kpilot/kpilot.kcfg:174 kpilot/kpilot.kcfg:179
#, no-c-format
msgid ""
"\n"
" "
msgstr ""
#: kpilot/kpilot.kcfg:110
#, no-c-format
msgid "Which databases not to backup."
msgstr ""
#: kpilot/kpilot.kcfg:137
#, no-c-format
msgid "Prevent HotSync when screen locked"
msgstr ""
#: kpilot/kpilot.kcfg:138
#, no-c-format
msgid ""
"Turning this option on prevents syncing\n"
"\twhen the screen is locked. This is a security measure\n"
"\tto prevent people from stealing your data through physical\n"
"\taccess to a Pilot device link to your machine.\n"
"\tIt doesn't work with screensavers other than TDE, though,\n"
"\tso you will need to turn it off for other environments."
msgstr ""
#: kpilot/kpilotConfigDialog_backup.ui:18
#: kpilot/kpilotConfigDialog_device.ui:18
#: kpilot/kpilotConfigDialog_startup.ui:19 kpilot/kpilotConfigDialog_sync.ui:18
#: kpilot/kpilotConfigDialog_viewers.ui:19
#, no-c-format
msgid "KPilot Options"
msgstr ""
#: kpilot/kpilotConfigDialog_backup.ui:29
#, no-c-format
msgid "Backup Frequency"
msgstr "Yedekleme Sıklığı"
#: kpilot/kpilotConfigDialog_backup.ui:54
#, no-c-format
msgid "Do &backup:"
msgstr "Y&edekle:"
#: kpilot/kpilotConfigDialog_backup.ui:63
#, no-c-format
msgid "On every HotSync"
msgstr ""
#: kpilot/kpilotConfigDialog_backup.ui:68
#, no-c-format
msgid "On request only"
msgstr ""
#: kpilot/kpilotConfigDialog_backup.ui:90
#, no-c-format
msgid "Databases"
msgstr "Veritabanları"
#: kpilot/kpilotConfigDialog_backup.ui:107
#, no-c-format
msgid "&No backup:"
msgstr "Y&edekleme yok:"
#: kpilot/kpilotConfigDialog_backup.ui:113
#: kpilot/kpilotConfigDialog_backup.ui:141
#, no-c-format
msgid ""
"<qt><p>Enter the databases types you wish to exclude from the backup "
"operation here. Use this setting if backing up some databases crashes the "
"handheld, or if you do not want a backup of some databases (like AvantGo "
"pages).</p><p>Entries with square brackets [] are <i>creator codes</i> like "
"<tt>[lnch]</tt> and can exclude a whole range of databases. Entries without "
"the brackets list database names, and may include shell-style wildcards, "
"like <tt>*_a68k</tt>.</p></qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_backup.ui:127
#, no-c-format
msgid "Not &restored:"
msgstr "&Geri Alınmadı:"
#: kpilot/kpilotConfigDialog_backup.ui:133
#: kpilot/kpilotConfigDialog_backup.ui:149
#, no-c-format
msgid ""
"<qt><p>Enter the databases types you wish to exclude from the restore "
"operation here (like AvantGo databases). They will be skipped even if they "
"exist in the set of backup databases on the handheld. If you still want to "
"install an ignored database to the handheld, you can always manually install "
"it to the handheld.</p><p>Entries with square brackets [] are <i>creator "
"codes</i> like <tt>[lnch]</tt> and can exclude a whole range of databases. "
"Entries without the brackets list database names, and may include shell-"
"style wildcards, like <tt>*_a68k</tt>.</p></qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_backup.ui:157
#: kpilot/kpilotConfigDialog_backup.ui:168
#, no-c-format
msgid "..."
msgstr "..."
#: kpilot/kpilotConfigDialog_backup.ui:160
#, no-c-format
msgid ""
"<qt>Click here to open the database selection dialog. This dialog allows you "
"to check the databases you want to exclude from the backup from a list.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_backup.ui:171
#, no-c-format
msgid ""
"<qt>Click here to open the database selection dialog. This dialog allows you "
"to select the databases you want to exclude from the restore operation from "
"a list.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_backup.ui:181
#, no-c-format
msgid "Run conduits durin&g a backup sync"
msgstr ""
#: kpilot/kpilotConfigDialog_backup.ui:184
#, no-c-format
msgid ""
"<qt>Check this box to run the selected conduits before every backup. This "
"makes sure the backup is up to date with the last changes from your PC.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_device.ui:29
#, no-c-format
msgid "Pilot &device:"
msgstr "&Pilot aygıtı:"
#: kpilot/kpilotConfigDialog_device.ui:35
#: kpilot/kpilotConfigDialog_device.ui:43
#, no-c-format
msgid ""
"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to "
"the correct device. You need write permission to successfully synchronize "
"with the handheld.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_device.ui:51
#, no-c-format
msgid "&Speed:"
msgstr "&Hız:"
#: kpilot/kpilotConfigDialog_device.ui:57
#: kpilot/kpilotConfigDialog_device.ui:115
#, no-c-format
msgid ""
"<qt>Select the speed of the serial connection to your handheld here. This "
"has no meaning for USB devices. For an older model, choose 9600. Newer "
"models may be able to handle speeds up to the maximum listed, 115200. You "
"can experiment with the connection speed: the manual suggests starting at a "
"speed of 19200 and trying faster speeds to see if they work.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_device.ui:65
#: kpilot/kpilotConfigDialog_device.ui:143
#, no-c-format
msgid ""
"<qt>Enter your name here, as it appears in the Pilot's &quot;Owner&quot; "
"setting.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_device.ui:88
#, no-c-format
msgid "9600"
msgstr "9600"
#: kpilot/kpilotConfigDialog_device.ui:93
#, no-c-format
msgid "19200"
msgstr "19200"
#: kpilot/kpilotConfigDialog_device.ui:98
#, no-c-format
msgid "38400"
msgstr "38400"
#: kpilot/kpilotConfigDialog_device.ui:103
#, no-c-format
msgid "57600"
msgstr "57600"
#: kpilot/kpilotConfigDialog_device.ui:108
#, no-c-format
msgid "115200"
msgstr "115200"
#: kpilot/kpilotConfigDialog_device.ui:123
#, no-c-format
msgid "En&coding:"
msgstr ""
#: kpilot/kpilotConfigDialog_device.ui:129
#: kpilot/kpilotConfigDialog_device.ui:154
#, no-c-format
msgid ""
"<qt>PalmOS devices are available in many different languages. If your device "
"uses a different encoding than ISO-latin1 (ISO8859-1), select the correct "
"encoding here, in order to display special characters correctly.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_device.ui:137
#, no-c-format
msgid "Pilot &user:"
msgstr "Pilot &kullanıcısı:"
#: kpilot/kpilotConfigDialog_device.ui:162
#, no-c-format
msgid "&Workarounds:"
msgstr ""
#: kpilot/kpilotConfigDialog_device.ui:171
#, no-c-format
msgid "None"
msgstr "Hiçbiri"
#: kpilot/kpilotConfigDialog_device.ui:176
#, no-c-format
msgid "Zire 31, 72, Tungsten T5"
msgstr ""
#: kpilot/kpilotConfigDialog_device.ui:183
#, no-c-format
msgid ""
"<qt>Workarounds enable special handling for specific devices. Most devices "
"do not need special handling. However, the Zire&tm; 31, Zire 72 and Tungsten "
"T5 <i>do</i> have special needs, so if you are connecting such a device, "
"please select the workaround for them.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_startup.ui:33
#, no-c-format
msgid "Exit Options"
msgstr "Çıkış Seçenekleri"
#: kpilot/kpilotConfigDialog_startup.ui:44
#, no-c-format
msgid "S&top KPilot's system tray application on exit"
msgstr ""
#: kpilot/kpilotConfigDialog_startup.ui:47
#, no-c-format
msgid ""
"<qt>Check this box to stop the KPilot daemon when you quit KPilot (only if "
"KPilot started the daemon itself).</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_startup.ui:55
#, no-c-format
msgid "Quit &after HotSync"
msgstr ""
#: kpilot/kpilotConfigDialog_startup.ui:58
#, no-c-format
msgid ""
"<qt>Check this box to stop both KPilot and the KPilot daemon after the "
"HotSync finishes. This may be useful for systems where KPilot is started by "
"the USB daemon.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_startup.ui:68
#, no-c-format
msgid "Startup Options"
msgstr "Başlangıç Seçenekleri"
#: kpilot/kpilotConfigDialog_startup.ui:79
#: kpilot/kpilotConfigWizard_user.ui:133
#, no-c-format
msgid "&Start KPilot at login"
msgstr "&Girişte KPilot uygulamasını çalıştır"
#: kpilot/kpilotConfigDialog_startup.ui:82
#, no-c-format
msgid ""
"<qt>Check this box to start up the KPilot daemon every time you log in to "
"TDE.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_startup.ui:90
#, no-c-format
msgid "S&how KPilot in system tray"
msgstr "KPilot Uygulamasını Sistem çekmecesinde &göster"
#: kpilot/kpilotConfigDialog_startup.ui:93
#, no-c-format
msgid ""
"<qt>Check this box to place a Kpilot icon in the system tray, which shows "
"the daemon's status, and allows you to select the next sync type and to "
"configure KPilot.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_sync.ui:32
#, no-c-format
msgid "Do full sync when chan&ging PCs"
msgstr ""
#: kpilot/kpilotConfigDialog_sync.ui:38
#, no-c-format
msgid ""
"<qt>Check this box to perform a full sync when your last sync was performed "
"with another PC or system, to guarantee the completeness of your data.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_sync.ui:44
#, no-c-format
msgid "HotSync (sync all changes)"
msgstr ""
#: kpilot/kpilotConfigDialog_sync.ui:49
#, no-c-format
msgid "FullSync (sync also unchanged records)"
msgstr ""
#: kpilot/kpilotConfigDialog_sync.ui:66
#, no-c-format
msgid ""
"<qt>Select in this list the synchronization type that KPilot will use as "
"default. Possible values are:<br>\"HotSync\", to run all selected conduits, "
"and sync the databases with a modified flag set, updating the modified "
"records only;<br>\"FullSync\" to run all selected conduits, and sync all "
"databases, reading all records, and performing a full backup;<br>\"Copy PC "
"to handheld\" to run all conduits and sync all databases, but instead of "
"merging the information from both sources, copy the PC data to the handheld;"
"<br>\"Copy handheld to PC\" to run all conduits and sync all databases, but "
"instead of merging the information from both sources, copy the handheld data "
"to the PC.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_sync.ui:74
#, no-c-format
msgid "&Default sync:"
msgstr ""
#: kpilot/kpilotConfigDialog_sync.ui:132
#, no-c-format
msgid ""
"<qt>Select in this list how conflicting entries (entries which were edited "
"both on your handheld and on the PC) are resolved. Possibly values are "
"\"Ask User\" to let you decide case by case, \"Do Nothing\" to allow the "
"entries to be different, \"PC overrides\", \"Handheld overrides\", \"Use "
"values from last sync\" and \"Use both entries\" to create a new entry on "
"both the PC and handheld. Note that the conflict resolution option selected "
"here can be overridden by conduits that have their own conflict resolution "
"configuration.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_sync.ui:159
#, no-c-format
msgid "Do not sync when screensaver is active"
msgstr ""
#: kpilot/kpilotConfigDialog_sync.ui:165
#, no-c-format
msgid ""
"<qt>Check this box to prevent KPilot from syncing your handheld while the "
"screensaver is active: this is a security measure to prevent others from "
"syncing <i>their</i> handhelds with your data. This option must be disabled "
"when you use a different desktop, since KPilot is not aware of screensavers "
"other than TDE's.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_viewers.ui:47
#, no-c-format
msgid "Make internal viewers &editable"
msgstr ""
#: kpilot/kpilotConfigDialog_viewers.ui:53
#, no-c-format
msgid ""
"<qt>The internal viewers can be read only or editable. The editable mode "
"allows you to add new records, delete or edit the existing records and sync "
"your modifications back to the handheld. Check this box to set the internal "
"viewers to editable mode, uncheck to set them to read only mode.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_viewers.ui:61
#, no-c-format
msgid "&Show private records"
msgstr "&Özel kayıtları göster"
#: kpilot/kpilotConfigDialog_viewers.ui:64
#, no-c-format
msgid ""
"<qt>Check this box to display in the internal viewers records that are "
"marked &quot;Private&quot; in the Pilot.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_viewers.ui:85
#, no-c-format
msgid "Show as \"&Last, first\""
msgstr ""
#: kpilot/kpilotConfigDialog_viewers.ui:88
#, no-c-format
msgid ""
"<qt>Select this option to display addresses in the internal address viewer "
"sorted by last name, first name.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_viewers.ui:96
#, no-c-format
msgid "Show as \"&Company, last\""
msgstr ""
#: kpilot/kpilotConfigDialog_viewers.ui:99
#, no-c-format
msgid ""
"<qt>Select this option to display addresses in the internal address viewer "
"sorted by company name, last name.</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog_viewers.ui:121
#, no-c-format
msgid "&Use key field"
msgstr ""
#: kpilot/kpilotConfigDialog_viewers.ui:124
#, no-c-format
msgid ""
"<qt>Check this box to combine all entries with the same last name in the "
"internal address viewer.</qt>"
msgstr ""
#: kpilot/kpilotConfigWizard_app.ui:24
#, no-c-format
msgid ""
"Finally, you can configure KPilot specifically for some PIM applications, "
"like Kontact (TDE's integrated PIM application) or Evolution (GNOME's "
"integrated PIM application).\n"
"\n"
"Press \"Finish\" to setup KPilot according to the settings in this "
"configuration Wizard."
msgstr ""
#: kpilot/kpilotConfigWizard_app.ui:37
#, no-c-format
msgid "Set Default Values for Syncing With"
msgstr ""
#: kpilot/kpilotConfigWizard_app.ui:48
#, no-c-format
msgid "&TDE-PIM suite (Kontact)"
msgstr "&TDE-PIM takımı (Kontact)"
#: kpilot/kpilotConfigWizard_app.ui:59
#, no-c-format
msgid "&GNOME-PIM (Evolution)"
msgstr "&GNOME-PIM (Evolution)"
#: kpilot/kpilotConfigWizard_app.ui:67
#, no-c-format
msgid "No sync, just backup"
msgstr ""
#: kpilot/kpilotConfigWizard_user.ui:24
#, no-c-format
msgid "This wizard will help you configure KPilot."
msgstr ""
#: kpilot/kpilotConfigWizard_user.ui:35
#, no-c-format
msgid ""
"As a first step, we need to determine the user name and how the handheld is "
"connected to the computer."
msgstr ""
#: kpilot/kpilotConfigWizard_user.ui:46
#, no-c-format
msgid "Handheld && User Name"
msgstr ""
#: kpilot/kpilotConfigWizard_user.ui:49
#, no-c-format
msgid ""
"<p>You can either let KPilot detect these values automatically (for this you "
"need your handheld ready and connected to the PC) or enter them manually.</"
"p>\n"
"<p>Please enter the username exactly as set on the handheld. </p>\n"
"<p>If setting the device type manually (i.e., if automatic detection did not "
"work for you), please look below for tips on choosing the right device "
"name. {0...n} means a number from 0 up to a very large number, though "
"usually just 255.\n"
"<p>\n"
"Serial Port: an old method of connection, used primarily by the original "
"line of Palm Pilots, and various Palm-based cellphones. Device name will "
"look like /dev/ttyS{0...n} (Linux) or /dev/cuaa{0...n} (FreeBSD).</p>\n"
"<p>\n"
"USB Port: A newer style of connection, used by most newer Palms, "
"Handsprings, and Sony Clies. Device name will look like /dev/ttyUSB{0...n} "
"or /dev/usb/tts/{0...n} (Linux) or /dev/ucom{0...n} (FreeBSD). On Linux, "
"definitely check both 0 and 1: newer devices tend to use 1; older devices "
"tend to use 0.</p>\n"
"<p>\n"
"Infrared: (pronounced infra-red) is a relatively slow connection type used "
"solely as a last resort. Device name will be /dev/ircomm0 or /dev/ttyS{0..."
"n} (Linux), or /dev/sio{0...n} (FreeBSD).</p>\n"
"<p>\n"
"Bluetooth: A new connection method, this is used almost exclusively on new, "
"high-end devices, like the Tungsten T3 or the Zire 72. Device name will be /"
"dev/usb/ttub/{0...n} or /dev/ttyUB{0...n} (Linux), or /dev/ttyp{0...n} "
"(FreeBSD).</p>\n"
"<p>\n"
"Network: This has not been tested by any of the KPilot developers themselves "
"(hardware donations always accepted!), but it has been reported that setting "
"the device to \"net:any\" will work for network-enabled devices. However, "
"this has also been known to lock KPilot up when doing anything other than "
"just syncing. Use it with caution.\n"
"</p>"
msgstr ""
#: kpilot/kpilotConfigWizard_user.ui:73
#, no-c-format
msgid "&Device:"
msgstr "&Aygıt:"
#: kpilot/kpilotConfigWizard_user.ui:79 kpilot/kpilotConfigWizard_user.ui:101
#, no-c-format
msgid ""
"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to "
"the correct device. Use the button below to automatically detect the device. "
"You need write permission to successfully synchronize with the handheld.</qt>"
msgstr ""
#: kpilot/kpilotConfigWizard_user.ui:87
#, no-c-format
msgid "&Automatically Detect Handheld && User Name"
msgstr ""
#: kpilot/kpilotConfigWizard_user.ui:90
#, no-c-format
msgid ""
"<qt>Click this button to open the detection dialog. The wizard will try to "
"automatically find and display the correct device and username for your "
"handheld. If the wizard cannot retrieve this information, check if you have "
"write permission for the device.</qt>"
msgstr ""
#: kpilot/kpilotConfigWizard_user.ui:98
#, no-c-format
msgid "/dev/pilot"
msgstr ""
#: kpilot/kpilotConfigWizard_user.ui:109 kpilot/kpilotConfigWizard_user.ui:123
#, no-c-format
msgid ""
"<qt>Enter your username here, as it appears in the Pilot's &quot;Owner&quot; "
"setting, or use the button below to automatically detect it.</qt>"
msgstr ""
#: kpilot/kpilotConfigWizard_user.ui:117
#, no-c-format
msgid "User na&me:"
msgstr "K&ullanıcı adı:"
#: kpilot/kpilotConfigWizard_user.ui:139
#, no-c-format
msgid ""
"<qt>Check this box to make the kpilot daemon load when you first log in "
"until you log out. That means (in theory), that you should not have to do "
"anything other than connect your handheld and push \"sync\", and kpilot will "
"appear and magically do your bidding. </qt>"
msgstr ""
#: kpilot/todoEditor_base.ui:32
#, no-c-format
msgid "&Description:"
msgstr "&Açıklama:"
#: kpilot/todoEditor_base.ui:54
#, no-c-format
msgid "&Note:"
msgstr "&Not:"
#: kpilot/todoEditor_base.ui:71
#, no-c-format
msgid "Ca&tegory:"
msgstr "&Kategori:"
#: kpilot/todoEditor_base.ui:90
#, no-c-format
msgid "&Priority:"
msgstr "Ö&ncelik:"
#: kpilot/todoEditor_base.ui:104
#, no-c-format
msgid "2"
msgstr "2"
#: kpilot/todoEditor_base.ui:109
#, no-c-format
msgid "3"
msgstr "3"
#: kpilot/todoEditor_base.ui:114
#, no-c-format
msgid "4"
msgstr "4"
#: kpilot/todoEditor_base.ui:119
#, no-c-format
msgid "5"
msgstr "5"
#: kpilot/todoEditor_base.ui:147
#, no-c-format
msgid "&Completed"
msgstr "&Tamamlandı"
#: kpilot/todoEditor_base.ui:155
#, no-c-format
msgid "Has &end date:"
msgstr ""
#, fuzzy
#~ msgid "&About"
#~ msgstr "Hakkında"
#, fuzzy
#~ msgid "About"
#~ msgstr "Hakkında"
#, fuzzy
#~ msgid "&Delete"
#~ msgstr "&Silindi"
#, fuzzy
#~ msgid "Configuration"
#~ msgstr "Yapılandırma Sihirbazı"
#, fuzzy
#~ msgid "&File"
#~ msgstr "CSV Dosya adı:"
#, fuzzy
#~ msgid "&Settings"
#~ msgstr "Yerel dil ayarları"
#~ msgid "Cannot open database"
#~ msgstr "Veritabanıılamadı"
#~ msgid "Pilot database error"
#~ msgstr "Pilot veritabanı hatası"
#~ msgid "Cannot create database %1 on the handheld"
#~ msgstr "Avuçiçinde %1 veritabanı oluşturulamadı"
#~ msgid "Device link ready."
#~ msgstr "Aygıt bağlantısı hazır."
#~ msgid "(empty)"
#~ msgstr "(boş)"
#, fuzzy
#~ msgid "Creating local backup of databases in %1."
#~ msgstr "Veritabanıılamadı"
#, fuzzy
#~ msgid "Creating local backup .."
#~ msgstr "Palm Pilot yedekleniyor..."
#, fuzzy
#~ msgid "FastSync"
#~ msgstr "&Hızlı-Senkronizasyon"
#~ msgid "Exiting on cancel. All data not restored."
#~ msgstr "İşlem iptal edildi. Verilerin tamamı yedeklenmedi."
#, fuzzy
#~ msgid "Python"
#~ msgstr "Telefon"
#, fuzzy
#~ msgid "Python Conduit for KPilot"
#~ msgstr "KPilot için Posta Kanalı"
#, fuzzy
#~ msgid "Configures the Python Conduit for KPilot"
#~ msgstr "KPilot için Boş Kanalı Yapılandırır"
#, fuzzy
#~ msgid "Cannot open file `%1' for restore."
#~ msgstr "Pilot portu \"%1\" açılamadı. "
#~ msgid "&FastSync"
#~ msgstr "&Hızlı-Senkronizasyon"
#~ msgid "List available conduits"
#~ msgstr "Kullanılabilir kanalları listele"
#~ msgid "Reset"
#~ msgstr "Sıfırla"
#, fuzzy
#~ msgid "Python-Conduit Options"
#~ msgstr "KPilot için Posta Kanalı"
#, fuzzy
#~ msgid "ConfigWizard_base3"
#~ msgstr "Bağlantı Ayarlama İletişim Kutusu"
#, fuzzy
#~ msgid "Export..."
#~ msgstr "Hatırlatmaları Aktar..."
#, fuzzy
#~ msgid "local"
#~ msgstr "vcal"
#~ msgid "&General"
#~ msgstr "&Genel"
#, fuzzy
#~ msgid "C&onflicts"
#~ msgstr "Çakışan Girdiler"
#, fuzzy
#~ msgid "Unknown sync mode"
#~ msgstr "[bilinmeyen]"
#, fuzzy
#~ msgid "Conduit flags: "
#~ msgstr "Kanal"
#~ msgid "Setting the clock on the PC from the time on the handheld"
#~ msgstr "Bilgisayarın saati avuçiçinin saatinden ayarlanıyor"
#, fuzzy
#~ msgid "Pilot device %1 does not exist. Assuming the device uses DevFS."
#~ msgstr "Pilot aygıtı %1 yok. Aygıtın DevFS kullandığı varsayılıyor."
#~ msgid "Could not start KMail. The error message was: %1."
#~ msgstr "KMail başlatılamadı. Alınan hata: %1"
#~ msgid "Kroupware syncing is enabled."
#~ msgstr "Kroupware senkronizasyonu etkinleştirildi."
#~ msgid "ToDo"
#~ msgstr "Yapılacaklar"
#, fuzzy
#~ msgid "FullSync"
#~ msgstr "Senkronizasyon Yok"
#, fuzzy
#~ msgid "Serial port"
#~ msgstr "Genel"
#, fuzzy
#~ msgid "USB port"
#~ msgstr "CSV Aktar"
#, fuzzy
#~ msgid "General &TDE"
#~ msgstr "Genel"
#, fuzzy
#~ msgid "We really do not know what this does."
#~ msgstr "Bunun ne yaptığını gerçekten bilmiyoruz"
#~ msgid ""
#~ "<qt>Sets the speed of the connection to your Pilot. This is only "
#~ "important for serial devices.</qt>"
#~ msgstr ""
#~ "<qt>Pilot'unuza bağlantı hızınızı ayarlar. Bu işlem sadece seri aygıtlar "
#~ "için önemlidir. </qt>"
#, fuzzy
#~ msgid "Hot Sync"
#~ msgstr "Senkronizasyon"
#, fuzzy
#~ msgid "Fast Sync"
#~ msgstr "&Hızlı-Senkronizasyon"
#~ msgid ""
#~ "*.so|JPilot Plugins\n"
#~ "*.*|All Files"
#~ msgstr ""
#~ "*.so|JPilot Eklentileri\n"
#~ "*.*|Tüm dosyalar"
#~ msgid "Loading the JPilot plugin failed"
#~ msgstr "JPilot eklentisinin yüklenmesi başarısız oldu"
#~ msgid "Error finding the plugin in memory."
#~ msgstr "Eklenti hafızada bulunamıyor."
#~ msgid "This JPilot plugin does not have a configuration dialog"
#~ msgstr "Bu JPilot eklentisi bir ayarlama iletişim kutusuna sahip değil"
#~ msgid "Change Plugin Folder"
#~ msgstr "Eklenti Dizinini Değiştir"
#~ msgid "Add Plugin Folder"
#~ msgstr "Eklenti Dizini Ekle"
#~ msgid "JPilotProxy Conduit for KPilot"
#~ msgstr "KPilot için JPilotProxy Bağlantısı"
#~ msgid "Configures the JPilotProxy Conduit for KPilot"
#~ msgstr "KPilot için JPilotProxy Bağlantısını Ayarlar"
#~ msgid "Original author and maintainer of this conduit"
#~ msgstr "Bu bağlantının asıl yazarı ve dağıtıcısı"
#~ msgid "Author of JPilot"
#~ msgstr "JPilot Yazarı"
#~ msgid "Expense"
#~ msgstr "Masraf"
#~ msgid "JPilot plugin folders:"
#~ msgstr "JPilot eklenti dizinleri:"
#~ msgid "&Scan Plugin Folders"
#~ msgstr "&Eklenti Dizinlerini Tara"
#~ msgid "CSV Export"
#~ msgstr "CSV Aktar"
#~ msgid "&Rotate"
#~ msgstr "&Yönlendir"
#~ msgid "&Append"
#~ msgstr "&Ekle"
#~ msgid "Database Export"
#~ msgstr "VeriTabanı(VT) Aktar"
#~ msgid "DB table:"
#~ msgstr "VT tablo:"
#~ msgid "DB name:"
#~ msgstr "VT adı:"
#~ msgid "DB passwd:"
#~ msgstr "VT parolası:"
#~ msgid "DB login:"
#~ msgstr "VT giriş:"
#~ msgid "DB server:"
#~ msgstr "VT sunucusu:"
#~ msgid "username"
#~ msgstr "kullanıcı adı"
#~ msgid "Database Type"
#~ msgstr "Veritabanı Türü"
#~ msgid "&PostgreSQL"
#~ msgstr "&PostgreSQL"
#~ msgid "&MySQL"
#~ msgstr "&MySQL"
#~ msgid "Password"
#~ msgstr "Parola"
#~ msgid "<qt>%1<br/>%2</qt>"
#~ msgstr "<qt>%1<br/>%2</qt>"
#~ msgid "Backing up Pilot. "
#~ msgstr "Pilot Yedekleniyor. "
#~ msgid "Restoring Pilot. "
#~ msgstr "Pilot Yeniden Yükleniyor. "
#~ msgid "HotSyncing. "
#~ msgstr "Senkronizasyon yapılıyor."
#~ msgid "FastSyncing. "
#~ msgstr "Hızlı-Senkronizasyon."
#, fuzzy
#~ msgid "&Serial port"
#~ msgstr "Genel"
#, fuzzy
#~ msgid "&USB port"
#~ msgstr "CSV Aktar"
#, fuzzy
#~ msgid "Actions"
#~ msgstr "Aktif"
#~ msgid "&Viewers"
#~ msgstr "&Göstericiler"
#~ msgid "Retrieve Mail"
#~ msgstr "İletiyi Al"
#~ msgid "POP/Mail"
#~ msgstr "POP/Posta"
#~ msgid "Popmail"
#~ msgstr "Popmail"
#~ msgid "Error retrieving mail"
#~ msgstr "E-posta alırken hata"
#~ msgid " (Timed out)"
#~ msgstr " (Zaman doldu)"
#~ msgid ""
#~ "\n"
#~ "\n"
#~ "POPMail conduit sent to SMTP server:\n"
#~ msgstr ""
#~ "\n"
#~ "\n"
#~ "SMTP sunucuya gönderilen POPMail kanalı:\n"
#~ msgid ""
#~ "\n"
#~ "SMTP server responded with:\n"
#~ msgstr ""
#~ "\n"
#~ "SMTP sunucu cevabı:\n"
#~ msgid "Cannot connect to SMTP server"
#~ msgstr "SMTP sunucuya bağlantı kurulamıyor"
#~ msgid "SMTP server failed to announce itself"
#~ msgstr "SMTP sunucu kendisini tanıtmadı"
#~ msgid "Couldn't EHLO to SMTP server"
#~ msgstr "SMTP sunucuya EHLO bilgisi gönderilemedi"
#~ msgid "Couldn't start sending new mail."
#~ msgstr "Yeni e-posta atılamadı."
#~ msgid "The recipient doesn't exist!"
#~ msgstr "Alıcı bulunamadı!"
#~ msgid "Unable to send message"
#~ msgstr "İleti gönderilemedi"
#~ msgid "QUIT command to SMTP server failed.\n"
#~ msgstr "SMTP sunucuya gönderilen QUIT komutunda hata.\n"
#~ msgid "Error reading message"
#~ msgstr "İleti okunmasında hata"
#~ msgid "Error writing message to the Pilot."
#~ msgstr "İletinin Pilot'a yazdırılması sırasında hata."
#~ msgid "Please enter your POP password:"
#~ msgstr "Lütfen POP parolanızı girin:"
#~ msgid "Error writing mail message to Pilot"
#~ msgstr "E-posta dosyasının yazdırılmasında hata"
#, fuzzy
#~ msgid "HotSync finished!"
#~ msgstr "Senkronizasyon tamamlandı."
#~ msgid "SMTP server:"
#~ msgstr "STMP sunucusu:"
#~ msgid "Sendmail:"
#~ msgstr "Sendmail:"
#~ msgid "/usr/lib/sendmail -t -i"
#~ msgstr "/usr/lib/sendmail -t -i"
#~ msgid "Receive method:"
#~ msgstr "Alma yöntemi:"
#~ msgid "POP server:"
#~ msgstr "POP sunucusu:"
#~ msgid "POP username:"
#~ msgstr "POP kullanıcı adı:"
#~ msgid "POP password:"
#~ msgstr "Pop parolası:"
#~ msgid "pop:110"
#~ msgstr "pop:110"
#~ msgid "Do Not Receive Mail"
#~ msgstr "İleti Alma"
#~ msgid "System mailbox:"
#~ msgstr "Sistem posta kutusu:"
#~ msgid "&Leave mail on server"
#~ msgstr "İ&letileri sunucuda bırak"
#~ msgid "Save &POP password"
#~ msgstr "&Pop parolasını kaydet"
#~ msgid "Conduit"
#~ msgstr "Kanal"
#~ msgid "Conduit Configuration Dialog"
#~ msgstr "Bağlantı Ayarlama İletişim Kutusu"
#~ msgid ""
#~ "This is an old-style conduit.\n"
#~ "To configure it, click the\n"
#~ "configure button below."
#~ msgstr ""
#~ "Bu eski tür bir bağnatıdır.\n"
#~ "Bunu ayarlamak için\n"
#~ "aşağıdaki ayarla düğmesine basınız."
#~ msgid ""
#~ "<p align=\"center\">This conduit appears to be broken and cannot be "
#~ "configured.</p>"
#~ msgstr ""
#~ "<p align=\"center\">Bu bağlantı bozuk gibi görünüyor ve ayarlanamıyor.</p>"
#~ msgid "Send Method"
#~ msgstr "Göndeme Yöntemi"
#~ msgid "&Do not send mail"
#~ msgstr "&İletiyi gönderme"
#~ msgid "Use &sendmail"
#~ msgstr "&Sendmail kullan"
#~ msgid "Use S&MTP"
#~ msgstr "S&MTP Kullan"
#~ msgid "Email address: "
#~ msgstr "E-posta adresi: "
#~ msgid "Signature file: "
#~ msgstr "İmza dosyası: "
#~ msgid "Sendmail command:"
#~ msgstr "Sendmail komutu:"
#~ msgid "SMTP port:"
#~ msgstr "SMTP portu:"
#~ msgid "Firewall:"
#~ msgstr "Güvenlik duvarı:"
#~ msgid "Send mail through KMail immediately"
#~ msgstr "İletiyi KMail kullanarak hemen gönder"
#~ msgid "Signature File %1 is missing."
#~ msgstr "İmza Dosyası %1 eksik. "
#~ msgid "Retrieve Method"
#~ msgstr "Alma Yöntemi"
#~ msgid "Use &POP3 server"
#~ msgstr "&POP3 sunucu kullan"
#~ msgid "Use &UNIX mailbox"
#~ msgstr "&UNIX posta kutusu kullan"
#~ msgid "UNIX mailbox:"
#~ msgstr "UNIX posta kutusu:"
#~ msgid "POP port:"
#~ msgstr "POP portu:"
#~ msgid "Use SMTP"
#~ msgstr "SMTP kullan"
#~ msgid "Use POP3 Server"
#~ msgstr "POP3 sunucu kullan"
#~ msgid "External Conduit Setup"
#~ msgstr "Harici Kanal Ayarı"
#~ msgid "Activate"
#~ msgstr "Etkinleştir"
#~ msgid "Deactivate"
#~ msgstr "Kapat"
#~ msgid "Active"
#~ msgstr "Aktif"
#~ msgid "Conduits installed on your system but not active"
#~ msgstr "Sisteminze yüklenmiş fakat aktif olmayan kanallar"
#~ msgid ""
#~ "The conduit %1 did not identify what database it supports. \n"
#~ "Please check with the conduits author to correct it."
#~ msgstr ""
#~ "Kanal %1 hangi veritabanını desteklediğini bulamadı.\n"
#~ "Lütfen kanal yazarı ile temasa geçip düzeltilmesini isteyin."
#~ msgid "No executable could be found for the conduit %1."
#~ msgstr "Kanal %1 için çalıştırılabilir bulunamadı."
#~ msgid ""
#~ "A conduit is already being set up. Please complete that action before "
#~ "setting up another conduit."
#~ msgstr ""
#~ "Bir kanal şu anda ayarlanmakta .\n"
#~ "Önce o ayarı bitirip daha sonra başkasına başlayın."
#~ msgid "Conduit Setup Error"
#~ msgstr "Kanal Kurulum Hatası"
#~ msgid "&Configure Conduits..."
#~ msgstr "&Kanalları Yapılandır..."
#~ msgid "C&onfigure Conduits..."
#~ msgstr "Kanalla&rı Yapılandır..."
#~ msgid "unnamed"
#~ msgstr "isimsiz"
#~ msgid "Last Name:"
#~ msgstr "Soyadı:"
#~ msgid "First Name:"
#~ msgstr "Adı:"
#~ msgid "Zip Code:"
#~ msgstr "Posta Kodu:"
#, fuzzy
#~ msgid "Adress"
#~ msgstr "Adres:"
#~ msgid "KNotes Conduit"
#~ msgstr "KNotes Kanalı"
#~ msgid "Changed %1/%2 Memos/Notes"
#~ msgstr "%1/%2 Hatırlatma/Not değiştirildi"
#~ msgid "last name"
#~ msgstr "soyadı"
#~ msgid "first name"
#~ msgstr "adı"
#~ msgid "title"
#~ msgstr "ünvan"
#~ msgid "note"
#~ msgstr "not"
#, fuzzy
#~ msgid "custom 1"
#~ msgstr "Özel 1:"
#, fuzzy
#~ msgid "custom 2"
#~ msgstr "Özel 2:"
#, fuzzy
#~ msgid "custom 3"
#~ msgstr "Özel 3:"
#, fuzzy
#~ msgid "custom 4"
#~ msgstr "Özel 4:"
#~ msgid "work phone"
#~ msgstr "iş telefonu"
#~ msgid "home phone"
#~ msgstr "ev telefonu"
#~ msgid "mobile phone"
#~ msgstr "cep telefonu"
#~ msgid "city"
#~ msgstr "şehir"
#~ msgid "country"
#~ msgstr "ülke"
#, fuzzy
#~ msgid "category"
#~ msgstr "Kategori"
#, fuzzy
#~ msgid "File could not be opened for reading"
#~ msgstr "Takvim veritabanıılamadı."
#, fuzzy
#~ msgid "Unknown"
#~ msgstr "[bilinmeyen]"
#, fuzzy
#~ msgid "Abbrowser Contact"
#~ msgstr "Abbrowser kanalı"
#, fuzzy
#~ msgid "Street:"
#~ msgstr "Eyalet:"
#, fuzzy
#~ msgid "Fax phone:"
#~ msgstr "Telefon"
#, fuzzy
#~ msgid "Company name:"
#~ msgstr "Kuruluş:"
#, fuzzy
#~ msgid "Other phone:"
#~ msgstr "Telefon"
#, fuzzy
#~ msgid "Palm Pilot Address"
#~ msgstr "E-posta Adresi: "
#, fuzzy
#~ msgid "Select Pilot"
#~ msgstr "KPilot'a Hoşgeldiniz"
#, fuzzy
#~ msgid "Don't Sync"
#~ msgstr "Senkronizasyon"
#, fuzzy
#~ msgid "Deconfliction"
#~ msgstr "Açıklama"
#, fuzzy
#~ msgid "<qt>Use key fields to merge address books.</qt>"
#~ msgstr "Adres defterine yeni bir adres ekler."
#, fuzzy
#~ msgid "&Install files"
#~ msgstr "Dosyalar yükleniyor"
#~ msgid "Conduit Error."
#~ msgstr "Kanal Hatası."
#, fuzzy
#~ msgid "&Hot Sync (fast)"
#~ msgstr "Senkronizasyon"
#, fuzzy
#~ msgid "Do &nothing"
#~ msgstr "Tekrar sorma"
#, fuzzy
#~ msgid "&KAddressbook overrides"
#~ msgstr "Abbrowser kanalı"
#, fuzzy
#~ msgid "&User choose"
#~ msgstr "kullanıcı adı"
#, fuzzy
#~ msgid "&Desktop overrides handheld"
#~ msgstr "Pilot yeniden yükleniyor. "
#, fuzzy
#~ msgid "Address Formats"
#~ msgstr "Adres Düzenleyici"
#, fuzzy
#~ msgid "Skip:"
#~ msgstr "&Geç"
#, fuzzy
#~ msgid "&Local overrides Pilot"
#~ msgstr "Pilot yeniden yükleniyor. "
#, fuzzy
#~ msgid "do nothing (ask again next sync)"
#~ msgstr "Tekrar sorma"
#, fuzzy
#~ msgid "Active Conduits"
#~ msgstr "KNotes Kanalı"
#, fuzzy
#~ msgid "Available Conduits"
#~ msgstr "Kullanılabilir kanalları listele"
#, fuzzy
#~ msgid "Original Author of KPilot"
#~ msgstr "Asıl Yazar"
#, fuzzy
#~ msgid "Unable to delete the text file \"%1\" on the PC"
#~ msgstr "&quot;%1&quot; dosyasıılamıyor!"
#, fuzzy
#~ msgid "Completely ignore database"
#~ msgstr "Veritabanıılamadı"
#~ msgid "Save as iCalendar file"
#~ msgstr "iCalendar dosyası olarak kaydet"
#, fuzzy
#~ msgid "Sync failed for database: "
#~ msgstr "%1 veritabanı senkronize ediliyor"
#, fuzzy
#~ msgid "ListMaker Conduit for KPilot"
#~ msgstr "KPilot için Boş Kanal"
#, fuzzy
#~ msgid "Configures the ListMaker Conduit for KPilot"
#~ msgstr "KPilot için Boş Kanalı Yapılandırır"
#, fuzzy
#~ msgid "Original Author of the VCal conduit"
#~ msgstr "Asıl Yazar"
#, fuzzy
#~ msgid "file locations"
#~ msgstr "Açıklama"
#, fuzzy
#~ msgid ""
#~ "New memo cannot be edited until\n"
#~ "HotSynced with pilot."
#~ msgstr ""
#~ "Yeni notun düzeltilmesi pilot ile \n"
#~ "bağlantı kurulmadan olmaz."
#, fuzzy
#~ msgid "<qt>What to map the pim's \"Fax\" field to locally</qt>"
#~ msgstr ""
#~ "Yüklenecek dosya listesine eklemek\n"
#~ "için bir dosya seçin."
#, fuzzy
#~ msgid ""
#~ "<qt>Use key fields (like Name and Company) to merge address books</qt>"
#~ msgstr "Adres defterine yeni bir adres ekler."
#~ msgid "Browse"
#~ msgstr "Gözat"
#, fuzzy
#~ msgid "Cannot delete new records until Hot-Synced with pilot."
#~ msgstr ""
#~ "Yeni kayıtların silinmesi pilot ile \n"
#~ "senkronizasyon kurulmadan yapılamaz."
#, fuzzy
#~ msgid "Last Name"
#~ msgstr "Soyadı:"
#, fuzzy
#~ msgid "First Name"
#~ msgstr "Adı:"
#, fuzzy
#~ msgid "home address"
#~ msgstr "Adres:"
#, fuzzy
#~ msgid "work address"
#~ msgstr "Adres:"
#~ msgid "Files To Install:"
#~ msgstr "Yüklenecek Dosyalar"
#, fuzzy
#~ msgid "Prompt before changing data"
#~ msgstr "&Veriyi değiştirmeden önce bildir."
#, fuzzy
#~ msgid "Delete locally deleted records on PDA"
#~ msgstr "Pilot üzerindeki silinmiş kayıtları yerel olarak sil"
#, fuzzy
#~ msgid ""
#~ "<qt>The %1 could not open the file `%2'. Please configure the conduit "
#~ "with the correct filename and try again.</qt>"
#~ msgstr ""
#~ "%1 '%2' dosyasını açamıyor. Lütfen kanalı doğru dosya adı ile "
#~ "yapılandırın ve tekrar deneyin."
#~ msgid "%1 Fatal Error"
#~ msgstr "%1 Kritik Hatası."
#~ msgid "ToDo Conduit"
#~ msgstr "Yapılacaklar Kanalı"
#, fuzzy
#~ msgid ""
#~ "<qt>This is the first time that you have done a HotSync with the "
#~ "vCalendar conduit. There is a to-do item in the PalmPilot which is not in "
#~ "the vCalendar (KOrganizer).<br>Item: <i>%1</i><br>What must be done with "
#~ "this item?</qt>"
#~ msgstr ""
#~ "vCalendar kanalı ile ilk defa senkronizasyon yapılıyor.\n"
#~ "PalmPilot'ta, vCalendar (KOrganizer) içinde yeralmayan\n"
#~ "bir randevu var.\n"
#~ "\n"
#~ msgid "&Skip"
#~ msgstr "&Geç"
#~ msgid "Insert &All"
#~ msgstr "Tümünü &Ekle"
#~ msgid ""
#~ "This is the first time that you have done a HotSync\n"
#~ "with the vCalendar conduit. There is an appointment\n"
#~ "in the PalmPilot which is not in the vCalendar (KOrganizer).\n"
#~ "\n"
#~ msgstr ""
#~ "vCalendar kanalı ilke ilk defa senkronizasyon yapılıyor.\n"
#~ "PalmPilot'ta, vCalendar (KOrganizer) içinde yeralmayan\n"
#~ "bir randevu var.\n"
#~ "\n"
#~ msgid ""
#~ "Appointment: %1.\n"
#~ "\n"
#~ "What must be done with this appointment?"
#~ msgstr ""
#~ "Randevu: %1.\n"
#~ "\n"
#~ "Bu randevu ne yapılsın?"
#~ msgid "KPilot vCalendar Conduit"
#~ msgstr "KPilot vCalendar Kanalı"
#~ msgid "Replace all data on Pilot with local data?"
#~ msgstr "Pilottaki bilgiler tamamen değiştirilsin mi?"
#~ msgid "Full Restore"
#~ msgstr "Tamamını geri yükle"
#~ msgid "Restoring databases to Palm Pilot. Slow sync required."
#~ msgstr ""
#~ "Palm Pilot'a bilgiler geri yükleniyor. Yavaş senkronizasyon gerekli."
#~ msgid "Backing up all data..."
#~ msgstr "Tüm veriler yedekleniyor..."
#~ msgid ""
#~ "Exiting on cancel.\n"
#~ "<B>Not</B> all the data was backed up."
#~ msgstr ""
#~ "İşlem iptal edildi.\n"
#~ "<b>Not</b>:Tüm veriler yedeklendi."
#~ msgid "Backing Up: "
#~ msgstr "Yedekleniyor: "
#~ msgid "Could not backup data!"
#~ msgstr "Bilgiler yedeklenmedi!"
#~ msgid "Missing File"
#~ msgstr "Kayıp Dosya"
#~ msgid "Install File Error"
#~ msgstr "Kurulum Dosyası Hatası"
#~ msgid "%1: Running conduit"
#~ msgstr "%1: Çalışan kanallar"
#~ msgid "Could not backup data for database &quot;%1&quot;"
#~ msgstr "&quot;%1&quot; için veri yedeklenemedi"
#, fuzzy
#~ msgid "No previous copy. Copying data from pilot..."
#~ msgstr "Önceden alınmış kopya yok. Pilot'tan veri alınıyor..."
#~ msgid "Hot-Syncing Pilot. Looking for modified data..."
#~ msgstr ""
#~ "Pilot ile senkronizasyon yapılıyor. Değiştirilmiş veriler aranıyor..."
#~ msgid "Cannot find database &quot;%1&quot;"
#~ msgstr "&quot;%1&quot; veritabanı bulunamadı"
#~ msgid "Error Syncing Database"
#~ msgstr "Veritabanı Senkronizasyonunda Hata"
#~ msgid ""
#~ "Item: %1.\n"
#~ "\n"
#~ "What must be done with this item?"
#~ msgstr ""
#~ "Öğe: %1.\n"
#~ "\n"
#~ "Bu öğe ne yapılsın?"
#~ msgid "Performing a TestSync."
#~ msgstr "Test Senkronizasyonu Yapılıyor."
#~ msgid "POP Mail Conduit"
#~ msgstr "POP E-posta Kanalı"
#~ msgid "TDE2 port"
#~ msgstr "TDE2 aktarımı"
#~ msgid "NULL Conduit author"
#~ msgstr "Boş Kanal düzenleyici"
#~ msgid "Receiving Mail"
#~ msgstr "İleti Alınıyor"
#~ msgid ""
#~ "The NULL conduit doesn't actually do anything.\n"
#~ "Fill in databases you don't want to sync in\n"
#~ "the database field, separated by commas."
#~ msgstr ""
#~ "Boş kanal aslında hiç birşey yapmıyor.\n"
#~ "Senkronize etmek istediğiniz veritabanlarını\n"
#~ "veritabanı alanına virgüllerle ayırarak yazın."
#~ msgid "NULL conduit was here!"
#~ msgstr "Boş Kanal"
#~ msgid ""
#~ "Enter a message here. This message will be entered into\n"
#~ "the Pilot's HotSync log when the NULL conduit runs."
#~ msgstr ""
#~ "Buraya bir mesaj yazın. Bu mesaj boş kanal çalıştığı zaman\n"
#~ "Pilot'un HotSync günlüğüne girilecektir."
#~ msgid ""
#~ "Enter a list of database names here. The NULL conduit\n"
#~ "will be run for each of these databases, effectively\n"
#~ "preventing them from being HotSynced."
#~ msgstr ""
#~ "Buraya veritabanı isimlerini yazın. Boş kanal her veritabanı için \n"
#~ "çalışacak ve senkronize edilmelerini önleyecektir."
#, fuzzy
#~ msgid "Log File"
#~ msgstr "Yapılacaklar Dosyası"