You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
krusader/doc/en/installation.docbook

1250 lines
51 KiB

<chapter id="installation">
<!-- **********************************************************************
installation.docbook
++++++++++++++++++++++++++
copyright : (C) 2000 - 2008
Rafi Yanai, Shie Erlich, Frank Schoolmeesters
& the Krusader Krew
e-mail : krusader@users.sourceforge.net
web site : http://www.krusader.org
description : a Krusader Documentation File
***************************************************************************
* Permission is granted to copy, distribute and/or modify this *
* document under the terms of the GNU Free Documentation License, *
* Version 1.1 or any later version published by the Free Software *
* Foundation; with no Invariant Sections, no Front-Cover Texts and *
* no Back-Cover Texts. A copy of the license is available on the *
* GNU site http://www.gnu.org/licenses/fdl.html or by writing to: *
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, *
* MA 02110-1301, USA. *
*********************************************************************** -->
<title>Installation on KDE3.x</title>
<indexterm>
<primary>Installation</primary>
</indexterm>
<sect1 id="requirements">
<title>Requirements</title>
<para>In order to successfully use the most recent
&krusader;, you need &kde;libs
&gt;= 3.4</para>
<para>Required &kde; version:
<itemizedlist>
<listitem>
<para>&krusader; v1.01: &kde;
2</para>
</listitem>
<listitem>
<para>&krusader; v1.02 - 1.40: &kde;
3.0 - &kde; 3.2</para>
</listitem>
<listitem>
<para>&krusader; 1.40: prefers &kde;
3.2 (otherwise all features will not be available)</para>
</listitem>
<listitem>
<para>&krusader; v1.50 - v1.51: &kde;
3.2 - &kde; 3.3 (Konfigurator crash on
&kde; 3.4)</para>
</listitem>
<listitem>
<para>&krusader; v1.60.0 - v1.70.0:
&kde; 3.3 - &kde; 3.5</para>
</listitem>
<listitem>
<para>&krusader; 1.70.x: prefers
&kde; &gt;= 3.4 (otherwise all
features will not be available)</para>
</listitem>
<listitem>
<para>&krusader; 1.80.0: &kde; 3.4 -
&kde; 3.5</para>
</listitem>
<listitem>
<para>&krusader; v2.xx.x: &kde; 4 -
&Qt; 4 The big challenge, a first release in
2008</para>
</listitem>
</itemizedlist>
NOTE: there are no installation instructions for &kde;4 yet available since at moment of writing &krusader;
was not ported yet to &kde;4.</para>
<para>Platforms:
<itemizedlist>
<listitem>
<para>All POSIX
(&Linux;/BSD/&UNIX;-like OSes),
&Solaris;</para>
</listitem>
<listitem>
<para>All BSD Platforms
(&freebsd;/&netbsd;/&openbsd;/&MacOS;)</para>
</listitem>
</itemizedlist></para>
<para>&krusader; uses about 3-4 Mbyte of memory to
run and about 15 Mbyte of shared memory, which is also used by
other processes, but this may vary depending on your platform
and configuration. In order to handle archives the archivers
must be configured
<link linkend="konfig-dependencies">here</link>.</para>
<para>A package of popular (un)packers, &krusader;
itself and add-ons can be found on the
&krudownload-url;.</para>
<para>For more requirements, see below. Have a look at the
&faq-lnk; section as well.</para>
</sect1>
<sect1 id="getting-krusader">
<title>Obtaining &krusader;</title>
<para>The latest information about &krusader; can be
found on the &kruwebsite-url; .</para>
<sect2 id="krusader-download">
<title>&krusader; Downloads</title>
<para>it is recommended to use the &krusader; package
that is provided by your distribution.
&distrowatch-com-url; is a great resource to check
the availability. If your distribution does not offer
&krusader;, please contact the creators of your
distribution and ask them to provide a &krusader;
package</para>
<para>The latest version, as well as the older versions, can
be found on the &krudownload-url; and on the
&sfmirrors-url;. It contains the source tarballs,
RPM and DEB packages to whatever distro the
&krusader;-Krew is using and packages build by
&krusader; users and third parties.</para>
<para>Distributions who provide &krusader;:
<itemizedlist>
<listitem>
<para>&suse-download-url; &gt;=
9.3, Note: please use &krusader;-1.60.0
instead of &krusader;-1.51 (might be unstable
on &SuSE;9.3-&kde;3.4).</para>
</listitem>
<listitem>
<para>&fedora; via
&fedora-extras-url;
<command># yum install krusader</command> will do the job,
thanks to Marcin Garski. &RedHat; RPM packages
can usually found on the &krudownload-url; or
at &dag-wiers-download-url; and
&dries-verachtert-download-url; .</para>
</listitem>
<listitem>
<para>&debian-download-url;, on our
&krudownload-url; you might find more recent
DEB packages. Note: usually &debian; packages
work also on distributions that are "based on
&debian;", and some of these provide their own
(incompatible) packages.
&ubuntu-kubuntu-download-url;,
&linspire-download-url;, &knoppix;
4.x DVD, &kanotix;, etc.</para>
</listitem>
<listitem>
<para>&mandriva-download-url; via the contrib
repository
<command># urpmi krusader</command> will do the job,
&gentoo-download-url;,
&yoper-download-url;.</para>
</listitem>
<listitem>
<para>&archlinux-download-url;,
&frugalware-linux-download-url;,
&pclinuxos-download-url;,
&altlinux-download-url;.</para>
</listitem>
<listitem>
<para>&freebsd-download-url;, the port is
maintained by
<link linkend="credits">Heiner Eichmann</link>.</para>
</listitem>
<listitem>
<para>&netbsd-download-url;,
&lunarlinux-download-url;
,&arklinux;, &openlx;,
&sourcemage;.</para>
</listitem>
<listitem>
<para>Even more distributions can be found with
&distrowatch-com-url;.</para>
</listitem>
</itemizedlist>Use the installation tools included in your
distro to install the &krusader; package. You
might need an internet connection if &krusader; is
not included on the &CD; or DVD. There are
probably other distributions which include
&krusader;. If you know of one, please send
feedback so that we can include it on the distrolist.</para>
<para>Others
<itemizedlist>
<listitem>
<para>&slackware; tgz binaries can usually be
found on the &krudownload-url;. You can also
use &portpkg-url; that contains a
&kru-slackbuild-url;,
<command># portpkg krusader</command> will do the
job.</para>
</listitem>
<listitem>
<para>There is a &macosx-port-url;
with the help of &fink-url; , the port is
maintained by <ulink url="http://hritcu.wordpress.com/about/">Catalin Hritcu</ulink>.</para>
</listitem>
</itemizedlist></para>
<para>Installation via the &klik-protocol-url;
<itemizedlist>
<listitem>
<para>&klik-krusader-url; downloads
&krusader; provided by &debian;
stable, more information is
&klik-available-url; .</para>
</listitem>
<listitem>
<para>&klik-krusader-latest-url; downloads the
latest &klik-stable-krusader-url; provided by
the &krusader; Krew.</para>
</listitem>
<listitem>
<para>&klik-krusader-cvs-url; downloads a
&klik-cvs-krusader-url; provided by the
&krusader; Krew.</para>
</listitem>
</itemizedlist></para>
<para>Search engines
<itemizedlist>
<listitem>
<para>You can also find packages on &Linux;
software archives such as &freshmeat-url; or
&kde-apps-url; .</para>
</listitem>
<listitem>
<para>If you can notfind a package for your distribution,
we recommend searching for it with
&rpmfind-url;, &rpmpbone-url; or
&rpmseek-url;.</para>
</listitem>
</itemizedlist>If you enjoy using &krusader;, we
would appreciate it if you went to one of these sites and
rated it.</para>
<para>If you still can not find a package, follow the
installation procedure on how to compile
&krusader; from source. This very thorough HowTo
describes the process in such detail that even newcomers
should not have any problems.</para>
</sect2>
<sect2 id="version_scheme">
<title>Version Scheme</title>
<para>A new version scheme has been used since
&krusader;-1.60.0
<itemizedlist>
<listitem>
<para>First digit - the major version</para>
</listitem>
<listitem>
<para>Second digit(s) - percentage of features completed
for this major version</para>
</listitem>
<listitem>
<para>Third digit(s) - bugfixes.</para>
</listitem>
</itemizedlist>In essence, releasing
&krusader;-1.60.0 means that we believe that
&krusader; is about 60% done with all the features
we had scheduled for the 1.x.x series. Series 2.x.x will be
&kde; 4.x releases. Hopefully, it is easy to
understand.</para>
</sect2>
<sect2 id="krusader_stable">
<title>Stable Version</title>
<para>
<filename>krusader-x.xx.tar.gz</filename>
</para>
<note>
<para>&krusader; is released under the
&gpl-lnk;. This means that THE PROGRAM IS
PROVIDED "AS IS" WITH NO WARRANTY OF ANY KIND, even when it
is marked as a stable release.</para>
</note>
</sect2>
<sect2 id="krusader_devel">
<title>Development Version (beta release)</title>
<para>
<filename>krusader-x.xx-betax.tar.gz</filename>
</para>
<para>Before every stable release we release at least one
development version in order to hunt down the bugs.</para>
<warning>
<para>These releases are beta releases and will probably
contain some bugs.</para>
</warning>&dev-cvs-note;
<para>The beta release has 3 goals:
<itemizedlist>
<listitem>
<para>Apply a feature-freeze until the stable is released,
only bugs will be fixed. New features have to wait until
the stable is released.</para>
</listitem>
<listitem>
<para>Obtain feedback from &krusader; users so
that we can fix the bugs.</para>
</listitem>
<listitem>
<para>Give translators time to update the translations for
the coming stable. Please read the
&i18n-page-url;.</para>
</listitem>
</itemizedlist></para></sect2>
<sect2 id="krusader_cvs">
<title>CVS Builds</title>
<para>
<filename>krusader-cvs-yyyymmdd.tar.gz</filename>
</para>
<warning>
<para>These builds are untested and come without any
warranty. They may contain bugfixes, new features, or even
new bugs.</para>
</warning>
<para>We provide daily snapshots of &krusader;'s
CVS version. For those who are interested, the
<emphasis role="bold">nightly tarball</emphasis> can be found
on the &krucutedge-url;. Depending on the stage of
development, this version will either be stable or unstable.
Just before a stable release, the CVS version is almost
stable. After a stable release new features will be committed
into CVS, which might lead to the appearance of bugs. In some
rare cases, the build will not even compile if we make a
mistake. In that case we try to fix the error as soon as
possible.</para>
<para>&krusader; provides 2 nightly snapshots:
<orderedlist numeration="arabic">
<listitem>
<para>
<filename>krusader-cvs-yyyymmdd.tar.gz</filename>:
<command>make -f Makefile.cvs</command> must be run before
the
<command>./configure</command> script is available.</para>
</listitem>
<listitem>
<para>
<filename>krusader-cvs2-yyyymmdd.tar.gz</filename>: for
users who have problems with the
<command>make -f Makefile.cvs</command> command, we have
already done this for you and the
<command>./configure</command> script is included in the
tarball. This tarball is a bit bigger than the first
one.</para>
</listitem>
</orderedlist></para>
<para>
<emphasis role="bold">check out from CVS</emphasis>.
&krusader; can be checked out through anonymous
(pserver) CVS with the following instruction set. The module
you wish to check out must be specified as the module name.
When prompted for a password for anonymous, press the
&Enter; key.</para>
<para>Currently, there are two module options:
<itemizedlist>
<listitem>
<para>krusader_kde2: the &kde;2 branch, stable
but it is basically v1.01 and there are no planned
changes</para>
</listitem>
<listitem>
<para>krusader_trinity: the &kde;3 branch that we
currently use</para>
</listitem>
</itemizedlist></para>
<para>To check out &krusader; from CVS:
<screen><prompt>$</prompt> <userinput><command>cvs</command> <option>-d:pserver:anonymous@krusader.cvs.sourceforge.net:/cvsroot/krusader login</option></userinput></screen>
<screen><prompt>$</prompt> <userinput><command>cvs</command> <option>-z3 -d:pserver:anonymous@krusader.cvs.sourceforge.net:/cvsroot/krusader co krusader_trinity</option></userinput></screen>
(note: updates from within the modules directory do
not need the -d parameter)</para>
<para>If you want to check out a specific version of
&krusader; from CVS (&eg;
&krusader;-1.60.0) :
<screen><prompt>$</prompt> <userinput><command>cvs</command> <option>-z3 -d:pserver:anonymous@krusader.cvs.sourceforge.net:/cvsroot/krusader co -rversion_1_60_0 krusader_trinity</option></userinput></screen>
</para>
<para>If you want to check out a specific date of
&krusader; from CVS (&eg;
&krusader;-2006-10-29) :
<screen><prompt>$</prompt> <userinput><command>cvs</command> <option>-z3 -d:pserver:anonymous@krusader.cvs.sourceforge.net:/cvsroot/krusader co -D2006-10-29 krusader_trinity</option></userinput></screen>
</para>
<para>Mostly being &gentoo; users, we provide a
&gentoo-life-ebuild-url; for all those who want to
stay on the bleeding edge of file management and do not want
to miss the advantages of portage. Please take a look at our
&krucutedge-url; for more installation
details.</para>
<para>We also provide &viewcvs-url; to browse the
CVS repository.</para>
</sect2>
<sect2 id="krusader_svn">
<title>Subversion</title>
<para>&subversion-url; is used for
the &krusader; 2.x series for &kde;4.
it is also possible to
&browse-svn-repo-url;.</para>
<para>To check out the latest &krusader; 1.x for
&kde; 3 from SVN: (NOTE: at moment of writing use CVS for krusader_trinity, since krusader_trinity
is developed in CVS and NOT in SVN, currently you will get an old version in SVN)
<screen><prompt>$</prompt> <userinput><command>svn</command> <option>co https://krusader.svn.sourceforge.net/svnroot/krusader/trunk/krusader_trinity</option></userinput></screen>
To check out the latest &krusader; 2.x
for &kde; 4 from SVN:
<screen><prompt>$</prompt> <userinput><command>svn</command> <option>co https://krusader.svn.sourceforge.net/svnroot/krusader/trunk/krusader_kde4</option></userinput></screen>
</para>
</sect2>
<sect2 id="krusader_old">
<title>Older Releases</title>
<para>If you are looking for older releases we recommend the
&sfmirrors-url;, available from our project
page.</para>
</sect2>
</sect1>
<sect1 id="compilation">
<title>Compiling and Installing</title>
<sect2 id="sourcedownload">
<title>Compiling &krusader;. What now?</title>
<para>Check the environment variables
&kdetqtdir-lnk;.</para>
<para>To compile and install &krusader; on your
system, type the following in the base directory of the
&krusader; package:</para>
<screen>
<prompt>$</prompt> <userinput><command>./configure</command></userinput>
<prompt>$</prompt> <userinput><command>make</command></userinput>
<prompt>$</prompt> <userinput><command>su -c 'make</command> <option>install'</option></userinput></screen>
&krusaderui-rc-text;
<para>Since &krusader; uses
<command>autoconf</command> and
<command>automake</command> you should have no trouble compiling
it. If you run into problems, read the detailed installation
instructions below.</para></sect2>
<sect2 id="install_quickstart">
<title>Quickstart Installation Tutorial</title>
<sect3 id="install_quickstart_debian">
<title>Debian</title>
<para>These instructions should work as well on &debian; based distributions like:
&ubuntu;, &kubuntu;, &linspire;, &kanotix;, ...</para>
<para>Add the next lines in the <filename>~/.bashrc</filename> configuration file
<screen>
<userinput><command>export</command> <option>TQTDIR=/usr</option></userinput>
<userinput><command>export</command> <option>TDEDIR=/usr</option></userinput>
<userinput><command>export</command> <option>export TDEDIRS=/opt/krusader:/usr</option></userinput>
</screen>
</para>
<para>Install the <link linkend="faqi_missing_libs">build dependencies</link> for &krusader;
<screen>
<prompt>#</prompt> <userinput><command>apt-get</command> <option>build-dep krusader</option></userinput>
</screen>
</para>
<para><link linkend="version_scheme">Download</link> the &krusader; sourcecode, unpack and
enter the <filename>krusader_trinity</filename> directory.</para>
<para>
The next command will create <command>./configure</command>
<screen>
<prompt>$</prompt> <userinput><command>make -f</command> <option>Makefile.cvs</option></userinput>
</screen>
NOTE: you might need to upgrade <filename>automake</filename> and/or <filename>autoconf</filename>, if an error message appears.
</para>
<para>Install &krusader; in the <filename>/opt</filename> directory to not overwrite the official &debian; binary <filename>/usr/bin/krusader</filename>,
so that <command>krusader</command> will run the official &debian; package and <command>/opt/bin/krusader</command> runs the compiled version.
It's recommended to use enable the full debug, so that you can possible problems at us. Run configure.
<screen>
<prompt>$</prompt> <userinput><command>./configure</command> <option>--prefix=/opt/krusader --enable-debug=full</option></userinput>
</screen>
</para>
<para>Compile &krusader;
<screen>
<prompt>$</prompt> <userinput><command>make</command></userinput>
</screen>
</para>
<para>Install Krusader
<screen>
<prompt>$</prompt> <userinput><command>su -c</command> <option>"make install"</option></userinput>
</screen>
</para>
<para><command>/opt/bin/krusader</command> runs the compiled &krusader; version.</para>
</sect3>
<sect3 id="install_quickstart_suse">
<title>SuSE</title>
<para>Install the <link linkend="faqi_missing_libs">build dependencies</link> for &krusader;</para>
<para><link linkend="version_scheme">Download</link> the &krusader; sourcecode, unpack and
enter the <filename>krusader_trinity</filename> directory. Now you can compile and install &krusader;
<screen>
<prompt>$</prompt> <userinput><command>make -f</command> <option>Makefile.cvs</option></userinput>
<prompt>$</prompt> <userinput><command>./configure</command> <option>--prefix=/opt/krusader --enable-debug=full</option></userinput>
<prompt>$</prompt> <userinput><command>make</command></userinput>
<prompt>$</prompt> <userinput><command>su -c</command> <option>"make install"</option></userinput>
</screen>
</para>
</sect3>
<sect3 id="install_quickstart_others">
<title>For other Linuxes</title>
<para>Ofcource it's impossible to cover all Linuxes, but here are the general installation instructions.</para>
<para>Usually <command>./configure --prefix=/usr</command> should be used, though options like
<filename>/opt/krusader</filename> are usually better so that you don't overwrite files that
are installed by your package managment system.
Please don't use the <filename>/usr/local</filename> directory as it simply won't work.</para>
<para>Install the <link linkend="faqi_missing_libs">build dependencies</link> for &krusader;</para>
<para><link linkend="version_scheme">Download</link> the &krusader; sourcecode, unpack and enter the <filename>krusader_trinity</filename> directory. Now you can compile and install &krusader;
<screen>
<prompt>$</prompt> <userinput><command>make -f</command> <option>Makefile.cvs</option></userinput>
<prompt>$</prompt> <userinput><command>./configure</command> <option>--prefix=/usr</option></userinput>
<prompt>$</prompt> <userinput><command>make</command></userinput>
<prompt>$</prompt> <userinput><command>su -c</command> <option>"make install"</option></userinput>
</screen>
</para>
</sect3>
</sect2>
<sect2 id="install_tutorial">
<title>Detailed Installation Tutorial</title>
<para>The next section will explain how to install
&krusader; step by step. Questions about the
installation process have been asked many times and
especially users new to &Linux; often have
problems compiling software from source. Therefore, we are
trying to keep the explanations as detailed as possible even
if they are mostly not &krusader; specific.
Experienced users may easily skip most of the steps.</para>
<para>Unfortunately, because not all &Linux;
distributions follow the &fhs-url; it is impossible
to write a tutorial that would cover all circumstances.
However, these guidelines will help you in the right
direction.</para>
<note>
<para>If you encountered problems, please read first this
installation procedure and the &faq-lnk;. If the
problem persists, use the &help-request-lnk; to
ask for help.</para>
</note>
<orderedlist>
<listitem>
<para>Install all packages and libraries that are needed
for the compilation, please read the
&faq-lnk;.
<tip>
<para>If you install &tdevelop;, (almost)
everything that you need to compile
&krusader; will be installed on your
computer. However, if you are not a developer, please
follow the instructions and do not use
&tdevelop; to compile
&krusader;.</para>
</tip></para>
<para></para>
<!-- Empty line to make it more readable -->
</listitem>
<listitem>
<para>Open your favourite terminal emulator
(&eg; &konsole;).</para>
<para></para>
<!-- Empty line to make it more readable -->
</listitem>
<listitem>
<para>We recommend you create a separate directory to
keep all the sources you compile in. This way you will
have a better overview of the installed programs and it
will be easier to uninstall them later.
<screen><prompt>$</prompt> <userinput><command>mkdir</command> ~/source</userinput></screen>
The chosen directory is just an example, any
other will work.</para>
<para></para>
<!-- Empty line to make it more readable -->
<para></para>
<!-- Empty line to make it more readable (second line is needed) -->
</listitem>
<listitem>
<para>Copy the sources to the
<filename>~/source</filename> directory and unpack them.
<screen><prompt>$</prompt> <userinput><command>cp</command> /<replaceable>"your_dir"</replaceable> /krusader-x.xx.tar.gz ~/source</userinput></screen>
<screen><prompt>$</prompt> <userinput><command>cd</command> ~/source</userinput></screen>
<screen><prompt>$</prompt> <userinput><command>tar</command> <option>-xzvf</option> krusader-x.xx.tar.gz</userinput></screen>
</para>
<para></para>
<!-- Empty line to make it more readable -->
</listitem>
<listitem>
<para>Optional step: if you wish you can delete the
tarball at this point as it is no longer needed.
<screen><prompt>$</prompt> <userinput><command>rm</command> krusader-x.xx.tar.gz</userinput></screen>
</para>
<para></para>
<!-- Empty line to make it more readable -->
</listitem>
<listitem>
<para>Change to the directory containing the sources.
<screen><prompt>$</prompt> <userinput><command>cd</command> krusader-x.xx</userinput></screen>
</para>
<para></para>
<!-- Empty line to make it more readable -->
</listitem>
<listitem id="kde_qt_dir">
<para>Check the environment variables
<envar>TQTDIR</envar>and
<envar>TDEDIR</envar>. &krusader;'s
<command>./configure</command> script needs to know where
the &Qt; and &kde; directories
are.</para>
<para>
<envar>TQTDIR</envar>:
<replaceable>&lt;path to your Qt
installation&gt;</replaceable> &eg;
<filename>/usr/lib/qt3</filename> or
<filename>/usr/qt3</filename></para>
<para>
<envar>TDEDIR</envar>:
<replaceable>&lt;path to your KDE
installation&gt;</replaceable> &eg;
<filename>/usr</filename> or
<filename>/opt/trinity</filename></para>
<para>Normally your distribution will set them for you,
but experience has shown that some do not. You can easily
check the values with the
<command>echo</command> command.
<screen><prompt>$</prompt> <userinput><command>echo</command> $TQTDIR</userinput>/usr/lib/qt3
<prompt>$</prompt> <userinput><command>echo</command> $TDEDIR</userinput>/usr</screen>
If both commands give an output, the enviroment variables
are set (the above example are the settings of
&mandriva;-&Linux;). In case you
receive empty lines, the variables are not set and you
have to set them manually. If you do not know what to set
the variables to, or if you want to check if the
variables are correctly set, ask your distributor or use
the
<command>find</command> command.
<screen><prompt>$</prompt> <userinput><command>find</command> <option>/usr /opt -name</option> qtconfig <option>-type f 2>/dev/null</option></userinput>
/usr/lib/qt3/bin/qtconfig
<prompt>$</prompt> <userinput><command>find</command> <option>/usr /opt -name</option> tdeinit <option>-type f 2>/dev/null</option></userinput>
/usr/bin/tdeinit</screen>
In this case
<filename>/usr/lib/qt3</filename> is your
<envar>TQTDIR</envar> and
<filename>/usr</filename> is your
<envar>TDEDIR</envar>. The installed binaries will go to
<filename>/usr/bin</filename>. Now we will set the
enviroment variables with the
<command>export</command> command.
<screen><prompt>$</prompt> <userinput><command>export</command> TQTDIR=<replaceable>&lt;replace with your TQTDIR&gt;</replaceable></userinput></screen>
<screen><prompt>$</prompt> <userinput><command>export</command> TDEDIR=<replaceable>&lt;replace with your TDEDIR&gt;</replaceable></userinput></screen>
</para>
<note>
<para>These enviroment variables are only set for the
lifetime of your current shell. When you close your
terminal and open a new one they will be gone. Assuming
&krusader; is not the only
&Qt;/&kde; program you want to
compile, we recommend to make these settings permanent
(&eg; append both export commands to your
<filename class="directory">/etc/profile</filename>)
file.</para>
</note>
<para>If you can notdetermine your TDEDIR,
<command>tde-config --prefix</command> might help
you.</para>
<para></para>
<!-- Empty line to make it more readable -->
<para></para>
<!-- Empty line to make it more readable (second line is needed) -->
</listitem>
<listitem>
<para>If you have downloaded a stable version
<filename>"krusader-x.xx.tar.gz"</filename> or a beta
version
<filename>"krusader-x.xx-betax.tar.gz"</filename>, you
can skip this step. In this case the
<filename>./configure</filename> script is
provided.</para>
<para>If you have downloaded a CVS build or nightly
tarball
<filename>"krusader-cvs-yyyy-mm-dd.tar.gz"</filename>",
you will have to run the following command to create the
<filename>./configure</filename> script:
<screen><prompt>$</prompt> <userinput><command>make</command> <option>-f</option>Makefile.cvs</userinput></screen>
</para>
<para>If everything is OK you will see the following
output on your screen:
<screen><prompt>$</prompt> <userinput><command>make</command> <option>-f</option> Makefile.cvs</userinput>
This Makefile is only for the CVS repository
This will be deleted before making the distribution
*** Creating acinclude.m4
*** Creating list of subdirectories
*** Creating configure.in
*** Creating aclocal.m4
*** Creating configure
*** Creating config.h template
*** Creating Makefile templates
*** Postprocessing Makefile templates
*** Creating date/time stamp
*** Finished
Don't forget to run ./configure
If you haven't done so in a while, run ./configure --help
<prompt>$</prompt></screen>
</para>
<note>
<para>You will need to have
<application>autoconf 2.52, 2.53 or
2.54</application> and
<application>automake 1.6</application> (or higher) to
run the
<command>make -f Makefile.cvs</command> command</para>
</note>
<tip>
<para>If you encounter problems with this command click
<link linkend="krusader_cvs">here</link>.
&krusader; provides two nightly builds
(snapshots) one with a
<filename>./configure</filename> script and one
without.</para>
</tip>
<para></para>
<!-- Empty line to make it more readable -->
<para></para>
<!-- Empty line to make it more readable (second line is needed) -->
</listitem>
<listitem>
<para>Your &Linux; distro
&krusader; RPM or DEB package will normally
install &krusader; in the
<filename>TDEDIR/bin</filename> directory. According to
the &fhs-url;, any user installed files go to
the
<filename>/usr/local</filename> directory. If you wish
&krusader; to be installed in another
directory, it can be determed with the prefix option. If
you do not have root access,
<filename>/home/YOUR_USERNAME/.trinity</filename> is probably
a good choice.
<screen>
foo
Krusader Project:
-----------------
Source code location: .
C Compiler: gcc
C Compiler flags: -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith
-Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2
-Wformat-security -Wmissing-format-attribute
C++ Compiler: g++
prefix: /usr/local
kde_libraries: /usr/include
kde_includes: /usr/lib
kde_locale: /usr/share/locale
qt_libraries: /usr/lib/qt3/lib
tqt_includes: /usr/lib/qt3/include
TDEDIR: /usr
TQTDIR: /usr/lib/qt3
Install path: /usr/local/bin
krusader version: 1.80.0
krusader binary: /usr/local/bin/krusader (after 'make install')
Thank you for using Krusader
Good - your configure finished. Start make now
<prompt>bash$</prompt>
</screen>
</para>
<para>This is the output for
&Mandrake;-&Linux; 10, other
distributions may give a different output.</para>
<tip>
<para>At the end of the
<command>./configure</command> script you will find a
summary of the most important settings, &eg;
where the &krusader; binary will be
installed (after the 'make install' command). This part
will also display a warning if the environment
variables &kdetqtdir-lnk; are empty.</para>
</tip>
<para></para>
<!-- Empty line to make it more readable -->
<para>Since &krusader;-1.70.0
<command>./configure</command> has two specific
&krusader; options:
<itemizedlist>
<listitem>
<para>
<userinput>
<command>./configure</command>
<option>--without-konqueror</option>
</userinput>: build &krusader; without support
&konqueror;'s servicemenus, default=with.
This means that &konqueror;'s right-click
menu entries will not be available.</para>
</listitem>
<listitem>
<para>
<userinput>
<command>./configure</command>
<option>--without-javascript</option>
</userinput>: build &krusader; without JavaScript
support, default=with. This means that the
&javascript-console-lnk; will not be
available.</para>
</listitem>
<listitem>
<para>
<userinput>
<command>./configure</command>
<option>--without-acl</option>
</userinput>: build &krusader; without ACL support default=with.
Sometimes this option is needed if you get a ACL compile error when running <command>make</command>.</para>
</listitem>
</itemizedlist>In the past the support was always
compiled in when the headers where found, now you have
the choice.</para>
<para>Use
<userinput>
<command>./configure</command>
<option>--help</option>
</userinput>to see more options or read the
<filename>INSTALL</filename> file in the
&krusader; sources.</para>
<para>If you used another --prefix= than
<filename>$TDEDIR or /usr/local</filename>, it is
recommended to do an extra check:
<screen><prompt>$</prompt> <userinput><command>tde-config</command> <option>--path exe</option></userinput>
/home/frank/.trinity/bin/:/usr/bin/:/usr/local/bin/
<prompt>$</prompt></screen>
If the
&lt;prefix_dir/bin&gt; directory is
not shown, you need to use e.g.
<command>export TDEDIRS=/usr/local:/usr</command>. To
make these settings permanent you can &eg;
append this export command to your
<filename>/etc/profile</filename> file. After that you
need to restart &kde;.</para>
<note>
<para>If
<command>./configure</command> fails, take a look at
&missing-libs-lnk;.</para>
</note>
<para></para>
<!-- Empty line to make it more readable -->
</listitem>
<listitem>
<para>Start the compilation process with the
<command>make</command> command.
<screen><prompt>$</prompt> <userinput><command>make</command></userinput></screen>
This will take about 3 - 40 minutes depending on how fast your computer runs. If
everything goes well, it will &eg; end with
the following messages:
<screen>
foo
make[2]: Leaving directory `/home/source/krusader_trinity/tar'
make[2]: Entering directory `/home/source/krusader_trinity'
make[2]: Leaving directory `/home/source/krusader_trinity'
make[1]: Leaving directory `/home/source/krusader_trinity'
<prompt>bash$</prompt>
</screen>
</para>
<para></para>
<!-- Empty line to make it more readable -->
<para>If
<command>./configure</command> was successful and
<command>make</command> failed for some reason, continue
to read this page. If you can not find a solution to your
problem, feel free to post a help request at our
&forum-lnk;.</para>
<para></para>
<!-- Empty line to make it more readable -->
</listitem>
<listitem>
<para>If everything is correct, you can now install
&krusader;.
<screen><prompt>$</prompt> <userinput><command>su -c 'make</command> <option>install'</option></userinput></screen>
You will be asked to enter your root
password.</para>
<para></para>
<!-- Empty line to make it more readable -->
<para></para>
<!-- Empty line to make it more readable (second line is needed) -->
</listitem>
<listitem>&krusaderui-rc-text;
<para></para>
<!-- Empty line to make it more readable --></listitem>
<listitem>
<para>Now you can
<link linkend="starting-krusader">
start</link> &krusader;.</para>
<para></para>
<!-- Empty line to make it more readable -->
</listitem>
<listitem>
<para>Optional step: Cleaning up to save disk space.
Note: All compiled files created with the
<command>make</command>command will be deleted.
<screen><prompt>$</prompt> <userinput><command>make</command> <option>clean</option></userinput></screen>
</para>
<para></para>
<!-- Empty line to make it more readable -->
<para></para>
<!-- Empty line to make it more readable (second line is needed) -->
</listitem>
<listitem>
<para>If you ever want to uninstall
&krusader;, use
<screen><prompt>$</prompt> <userinput><command>su -c 'make</command> <option>uninstall'</option></userinput></screen>
You will be asked to enter your root
password.</para>
<para></para>
<!-- Empty line to make it more readable -->
</listitem>
</orderedlist>
<para>If you followed the installation procedure and still
encountered problems installing &krusader;, refer
to &faq-lnk;. If the problem persists, use the
&help-request-lnk; to ask for help.</para>
</sect2>
</sect1>
<sect1 id="mac-port">
<title>Installing on &MacOS;-X</title>
<indexterm>
<primary>&MacOS;-X port</primary>
</indexterm>
<note><para>Since June 2006 &krusader; is added into the
<ulink url="http://pdb.finkproject.org/pdb/package.php/krusader">&krusader; finkproject.org repository</ulink>
Please check this url for the latest information about the &MacOS;-X port,
please read the &fink-url; documentation for more information,
all information below could be outdated, though they should still work :)
From now on the port is maintained by
<ulink url="http://hritcu.wordpress.com/about/">Catalin Hritcu</ulink>.
</para></note>
<para>Krusader is ported to &MacOS; thanks the &fink-url;-project and Jonas
B&auml;hr and &bodo-tasche-url; .
Unfortunately the only *stable* kdelib-binaries which
&fink-url; has to offer is currenly 3.1.4 which
means you need to use &krusader;-1.40 .
Unfortunately the &MacOS; X &krusader;
port does not have the same power as in a native
&Linux;-&kde; environment. To run
&krusader; you need also X11, which doesn't interact
with the rest of the &MacOS; desktop. We hope that
&Qt;4/&kde;4 will solve most of these
problems. If you want a more recent Krusader version you need
to compile &kde;. With &fink-url; it is
rather easy but it takes some CPU cycles.</para>
<para>Installation Instructions for &krusader;-1.40
<orderedlist>
<listitem>
<para>Download and install &fink-url; with the
&kde;3.1 binaries provided by fink and read the
documentation.</para>
</listitem>
<listitem>
<para>Extract the
<filename>
krusader-1.40.fink.darwin-ppc.tar.bz2</filename> package to
<filename>/sw/fink/dist/local/main/</filename> Only root can
write here. You may have to create 'local' and
'main'.</para>
</listitem>
<listitem>
<para>Run as root:
<command>fink install krusader</command></para>
</listitem>
</orderedlist></para>
<para>Follow these instructions if you wish to compile more
source code or use a more recent version of
&krusader;:
<orderedlist>
<listitem>
<para>Install &apple-x11-url;</para>
</listitem>
<listitem>
<para>Install the &apple-x11-sdk-url;
developer-tools with X11 headers (gcc is included)</para>
</listitem>
<listitem>
<para>Install the fink-base</para>
</listitem>
<listitem>
<para>Compile tdelibs 3.4.1 or higher (fink provides the
necessary
<filename>.info</filename> files)</para>
</listitem>
<listitem>
<para>Compile the &krusader;-tarball or follow
steps 2 and 3 of the previous section if a recent
&krusader;-package &eg;
<filename>
krusader-1.70.0.fink.darwin-ppc.tar.bz2</filename> is
available</para>
</listitem>
</orderedlist></para>
<para>Follow these instructions if you wish to compile &krusader;-1.80.0 :
<orderedlist>
<listitem>
<para>Install &apple-x11-url;</para>
</listitem>
<listitem>
<para>nstall fink and
<ulink url="http://fink.sourceforge.net/faq/usage-fink.php#unstable">enable fink unstable</ulink>.</para>
</listitem>
<listitem>
<para>Compile and install the &kde; bundle in fink: fink install bundle-kde-ssl
(if you get “no package found” the previous step did not succeed).</para>
</listitem>
<listitem>
<para>Use <filename>krusader.info</filename> (provided in the &krusader;-sourcecode) and then copy to
<filename>/sw/fink/dists/local/main/finkinfo</filename> .</para>
</listitem>
<listitem>
<para>Compile and install &krusader; in fink: <command>fink install krusader</command>
</para>
</listitem>
<listitem>
<para>Start X11 (startx) and in xterm run &krusader;
</para>
</listitem>
</orderedlist>
Thanks to <ulink url="http://hritcu.wordpress.com/2006/08/10/krusader-on-intel-mac/">Catalin Hritcu </ulink> for these install instructions.
</para>
</sect1>
<sect1 id="starting-krusader">
<title>Starting &krusader;</title>
<para>Type
<userinput>
<command>krusader</command>
</userinput> (lower case) at a command prompt. You can create
shortcut on your desktop or create an entry in the
(&kde;) menu. Read the previous page and the
&faq-lnk; if &krusader; doesn't
start.</para>
<para>When &krusader; is started from the
command line, various options can be specified to modify its
behavior.</para>
<screen>
<prompt>$</prompt> <userinput><command>krusader</command></userinput>
WARNING: Mt.Man: Born, looking around to get familiar. foo</screen>
<note>
<para>Do not worry about the messages you get in the
&konsole;. These messages are log messages that
can be used for debugging &krusader;.</para>
</note>
<para>You can also use
<keycombo action="simul">&Alt;
<keycap>F2</keycap></keycombo> to open the Run Command dialog
box, type
<userinput>
<command>krusader</command>
</userinput> (lower case) and press &Enter; or click
on the
<guibutton>Run</guibutton> button.</para>
<para>If &krusader; is installed by an RPM or DEB
package then usually &krusader; can be started from
the &kmenu;. &eg; on
&Mandrake;-&Linux; 10.0 click on the
&ticon; button and choose
<emphasis role="bold">
<menuchoice>
<guimenuitem>Applications</guimenuitem>
<guimenuitem>File tools</guimenuitem>
<guimenuitem>&krusader;</guimenuitem>
</menuchoice>
</emphasis>.</para>
<variablelist>
<title>Command-line options:</title>
<varlistentry>
<term>
<option>--left</option>
<replaceable>
&lt;path&gt;</replaceable>
</term>
<listitem>
<para>
<action>start left panel at
&lt;path&gt;</action>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<option>--right</option>
<replaceable>
&lt;path&gt;</replaceable>
</term>
<listitem>
<para>
<action>start right panel at
&lt;path&gt;</action>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<option>--left</option>
<replaceable>
&lt;path1&gt;,&lt;path2&gt;,&lt;path3&gt;</replaceable>
</term>
<listitem>
<para>
<action>start left panel at
&lt;path1&gt;,&lt;path2&gt;,&lt;path3&gt;,
with tabs.</action>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<option>--profile</option>
<replaceable>
&lt;panel-profile&gt;</replaceable>
</term>
<listitem>
<para>
<action>load a
<link linkend="panel_profiles">panel-profile</link> on
startup (this overrides the
<link linkend="konfig-startup">default startup
profile</link>).</action>
</para>
</listitem>
</varlistentry>
</variablelist>
<para>Examples:
<screen><prompt>$</prompt> <userinput><command>krusader</command> <replaceable>--left=&lt;path&gt; --right=&lt;path&gt;</replaceable></userinput></screen>
<screen><prompt>$</prompt> <userinput><command>krusader</command> <replaceable>--left=/mnt/cdrom --right=ftp://downloads@myserver.net</replaceable></userinput></screen>
<screen><prompt>$</prompt> <userinput><command>krusader</command> <replaceable>--left=&lt;path1&gt;,&lt;path2&gt; --right=&lt;path1&gt;,&lt;path2&gt;,&lt;path3&gt;</replaceable></userinput></screen>
<screen><prompt>$</prompt> <userinput><command>krusader</command><replaceable>--profile &lt;panel-profile&gt;</replaceable></userinput></screen>
<screen><prompt>$</prompt> <userinput><command>krusader</command> <replaceable>--profile ftp-managment</replaceable></userinput></screen>
</para>
<para>The standard &Qt; and &kde;
command-line options are available, and can be listed by
entering
<userinput>
<command>krusader</command>
<option>--help</option>
</userinput>.</para>
<variablelist>
<title>Other command-line options:</title>
<varlistentry>
<term>
<option>--help-qt</option>
</term>
<listitem>
<para>
<action>List Qt-specific options</action>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<option>--help-kde</option>
</term>
<listitem>
<para>
<action>List KDE-specific options</action>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<option>--help-all</option>
</term>
<listitem>
<para>
<action>List all options</action>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<option>--author</option>
</term>
<listitem>
<para>
<action>Show the authors names</action>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<option>-v,--version</option>
</term>
<listitem>
<para>
<action>Show the version number</action>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<option>--license</option>
</term>
<listitem>
<para>
<action>Show license information</action>
</para>
</listitem>
</varlistentry>
</variablelist>
</sect1>
<sect1 id="configuration">
<title>Configuring &krusader;</title>
<para>When you run &krusader; for the first time,
the &krusader; configuration module
<link linkend="konfigurator">Konfigurator</link> will show up
and allow you to configure &krusader; as well as
detect installed packers and tools. You can always run
Konfigurator again from the
&settingsmenu-lnk;.</para>
</sect1>
<sect1 id="default-file-manager">
<title>Making &krusader; the default file
manager</title>
<para>To make &krusader; the default file manager in
Gnome, <ulink url="http://psychocats.net/ubuntu/nonautilusplease">click here</ulink> for more information.
</para>
<para>To make &krusader; the default file manager in
&kde;, <ulink url="http://groups.google.com/group/krusader-devel/browse_thread/thread/8209d785d3ba0ac6">click here</ulink> for more information.
</para>
</sect1>
</chapter>
<chapter id="krusader_kde4_install">
<title>Installation on KDE4.x</title>
<sect1 id="kde4_install">
<title>Krusader installation instructions on KDE4.0</title>
<note>
<para>From version &krusader;-2.0.0 and higher is &kde;-4 only.</para>
</note>
<note>
<para>At moment of writing &krusader;-2.0.0 is still under development, though it works :)</para>
</note>
<para>"krusader_kde4.tar.gz" is the supposed name of the krusader tarball (it will be probably a different one ;)</para>
<para>You can download the latest available krusader-2.x <link linkend="krusader_svn">from SVN</link>.</para>
<para><command>DCMAKE_INSTALL_PREFIX</command> is the location of the KDE DTQT_INCLUDES</para>
<para>
<screen>
<prompt>$</prompt> <userinput><command>tar -xzvf</command> <option>krusader_kde4.tar.gz</option></userinput>
<prompt>$</prompt> <userinput><command>cd </command> <option>krusader_kde4</option></userinput>
<prompt>$</prompt> <userinput><command>cmake </command> <option>-DCMAKE_INSTALL_PREFIX=/usr/ -DTQT_INCLUDES=/usr/share/qt4/include</option></userinput>
<prompt>$</prompt> <userinput><command>make</command></userinput>
<prompt>$</prompt> <userinput><command>su -c </command> <option>"make install"</option></userinput>
</screen>
</para>
</sect1>
</chapter>