Added kvirc-specific admin directory

git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/applications/kvirc@1096505 283d02a7-25f6-0310-bc7c-ecb5cbfe19da

admin/Makefile.am

@@ -0,0 +1,10 @@
+SUBDIRS = libtool
+
+EXTRA_DIST = acinclude.m4.in libtool.m4.in gendoc.pl gensrc.pl \
+		depcomp config.guess config.sub install-sh ltmain.sh \
+		missing objprelink.c sedfiles.sh \
+		searchmetaob.sh mkcvstag.sh src_cvstag src_date
+
+objprelink: objprelink.c
+	$(CC) -o $@ -O2 $< /usr/lib/libbfd.a /usr/lib/libiberty.a
+

admin/Makefile.in

@@ -0,0 +1,540 @@
+# Makefile.in generated by automake 1.10 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = admin
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in config.guess \
+	config.sub depcomp install-sh ltmain.sh missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SS_CPPFLAGS = @SS_CPPFLAGS@
+SS_INCDIRS = @SS_INCDIRS@
+SS_LDFLAGS = @SS_LDFLAGS@
+SS_LIBDIRS = @SS_LIBDIRS@
+SS_LIBLINK = @SS_LIBLINK@
+SS_MSGFMT = @SS_MSGFMT@
+SS_PERL_BINARY = @SS_PERL_BINARY@
+SS_PERL_CCFLAGS = @SS_PERL_CCFLAGS@
+SS_PERL_LDFLAGS = @SS_PERL_LDFLAGS@
+SS_QT_MOC = @SS_QT_MOC@
+SS_QT_MOC_FLAGS = @SS_QT_MOC_FLAGS@
+SS_RPATH = @SS_RPATH@
+SS_TOPSRCDIR = @SS_TOPSRCDIR@
+STRIP = @STRIP@
+VERSION = @VERSION@
+XMKMF = @XMKMF@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+applnkdir = @applnkdir@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+configdir = @configdir@
+configmodulesdir = @configmodulesdir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+defscriptdir = @defscriptdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+globalkvircdir = @globalkvircdir@
+headersdir = @headersdir@
+helpdir = @helpdir@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+iconapps128datadir = @iconapps128datadir@
+iconapps16datadir = @iconapps16datadir@
+iconapps32datadir = @iconapps32datadir@
+iconapps48datadir = @iconapps48datadir@
+iconapps64datadir = @iconapps64datadir@
+iconappsscalabledatadir = @iconappsscalabledatadir@
+iconmime128datadir = @iconmime128datadir@
+iconmime16datadir = @iconmime16datadir@
+iconmime32datadir = @iconmime32datadir@
+iconmime48datadir = @iconmime48datadir@
+iconmime64datadir = @iconmime64datadir@
+iconmimescalabledatadir = @iconmimescalabledatadir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+kdeservicesdir = @kdeservicesdir@
+libdir = @libdir@
+libexecdir = @libexecdir@
+licensedir = @licensedir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mimelnkdir = @mimelnkdir@
+mkdir_p = @mkdir_p@
+modulelibdir = @modulelibdir@
+msgcolorsdir = @msgcolorsdir@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+picsdir = @picsdir@
+pluglibdir = @pluglibdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+themedir = @themedir@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+topdir = @topdir@
+SUBDIRS = libtool
+EXTRA_DIST = acinclude.m4.in libtool.m4.in gendoc.pl gensrc.pl \
+		depcomp config.guess config.sub install-sh ltmain.sh \
+		missing objprelink.c sedfiles.sh \
+		searchmetaob.sh mkcvstag.sh src_cvstag src_date
+
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  admin/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  admin/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    distdir=`$(am__cd) $(distdir) && pwd`; \
+	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$top_distdir" \
+	        distdir="$$distdir/$$subdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-info: install-info-recursive
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+	install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am check check-am clean clean-generic clean-libtool \
+	ctags ctags-recursive distclean distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am
+
+
+objprelink: objprelink.c
+	$(CC) -o $@ -O2 $< /usr/lib/libbfd.a /usr/lib/libiberty.a
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

admin/depcomp

@@ -0,0 +1,530 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2005-07-09.11
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+  stat=$?
+
+  if test -f "$tmpdepfile"; then :
+  else
+    stripped=`echo "$stripped" | sed 's,^.*/,,'`
+    tmpdepfile="$stripped.u"
+  fi
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    outname="$stripped.o"
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mecanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+      exit $stat
+   fi
+
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no
+  for arg in "$@"; do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  "$@" || exit $?
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

admin/gensrc.pl

@@ -0,0 +1,67 @@
+#!/usr/bin/perl
+
+$name = $ARGV[0];
+
+if($name eq "")
+{
+	print "Usage: gensrc <filename>\n";
+	exit;
+}
+
+$bIsHeader = 0;
+$ifdefname = $name;
+$ifdefname =~ tr/a-z/A-Z/;
+$ifdefname =~ s/\./_/;
+$ifdefname = "_$ifdefname\_";
+
+if(open(THEFILE,">$name"))
+{
+	$_ = $name;
+	if(/[A-Za-z_]*.h/)
+	{
+		$bIsHeader = 1;
+	}
+
+
+	if($bIsHeader)
+	{
+		print THEFILE "#ifndef $ifdefname\n";
+		print THEFILE "#define $ifdefname\n";
+	}
+
+	$thetime = gmtime;
+
+	print THEFILE "//\n";
+	print THEFILE "//   File : $name\n";
+	print THEFILE "//   Creation date : $thetime GMT by Szymon Stefanek\n";
+	print THEFILE "//\n";
+	print THEFILE "//   This file is part of the KVirc irc client distribution\n";
+	print THEFILE "//   Copyright (C) 2002 Szymon Stefanek (pragma at kvirc dot net)\n";
+	print THEFILE "//\n";
+	print THEFILE "//   This program is FREE software. You can redistribute it and/or\n";
+	print THEFILE "//   modify it under the terms of the GNU General Public License\n";
+	print THEFILE "//   as published by the Free Software Foundation; either version 2\n";
+	print THEFILE "//   of the License, or (at your opinion) any later version.\n";
+	print THEFILE "//\n";
+	print THEFILE "//   This program is distributed in the HOPE that it will be USEFUL,\n";
+	print THEFILE "//   but WITHOUT ANY WARRANTY; without even the implied warranty of\n";
+	print THEFILE "//   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n";
+	print THEFILE "//   See the GNU General Public License for more details.\n";
+	print THEFILE "//\n";
+	print THEFILE "//   You should have received a copy of the GNU General Public License\n";
+	print THEFILE "//   along with this program. If not, write to the Free Software Foundation,\n";
+	print THEFILE "//   Inc. ,59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n";
+	print THEFILE "//\n";
+	print THEFILE "\n";
+
+	if($bIsHeader)
+	{
+		print THEFILE "\n";
+		print THEFILE "#endif //$ifdefname\n";
+	}
+
+	close(THEFILE);
+} else {
+	print "No way to open the file $name\n";
+}
+

admin/install-sh

@@ -0,0 +1,323 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2005-05-14.22
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c         (ignored)
+-d         create directories instead of installing files.
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+  case $1 in
+    -c) shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) chmodcmd="$chmodprog $2"
+        shift
+        shift
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t) dstarg=$2
+	shift
+	shift
+	continue;;
+
+    -T) no_target_directory=true
+	shift
+	continue;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    *)  # When -d is used, all remaining arguments are directories to create.
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
+        # Otherwise, the last argument is the destination.  Remove it from $@.
+	for arg
+	do
+          if test -n "$dstarg"; then
+	    # $@ is not empty: it contains at least $arg.
+	    set fnord "$@" "$dstarg"
+	    shift # fnord
+	  fi
+	  shift # arg
+	  dstarg=$arg
+	done
+	break;;
+  esac
+done
+
+if test -z "$1"; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src ;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    src=
+
+    if test -d "$dst"; then
+      mkdircmd=:
+      chmodcmd=
+    else
+      mkdircmd=$mkdirprog
+    fi
+  else
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dstarg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dstarg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst ;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+      fi
+      dst=$dst/`basename "$src"`
+    fi
+  fi
+
+  # This sed command emulates the dirname command.
+  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+  # Make sure that the destination directory exists.
+
+  # Skip lots of stat calls in the usual case.
+  if test ! -d "$dstdir"; then
+    defaultIFS='
+	 '
+    IFS="${IFS-$defaultIFS}"
+
+    oIFS=$IFS
+    # Some sh's can't handle IFS=/ for some reason.
+    IFS='%'
+    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+    shift
+    IFS=$oIFS
+
+    pathcomp=
+
+    while test $# -ne 0 ; do
+      pathcomp=$pathcomp$1
+      shift
+      if test ! -d "$pathcomp"; then
+        $mkdirprog "$pathcomp"
+	# mkdir can fail with a `File exist' error in case several
+	# install-sh are creating the directory concurrently.  This
+	# is OK.
+	test -d "$pathcomp" || exit
+      fi
+      pathcomp=$pathcomp/
+    done
+  fi
+
+  if test -n "$dir_arg"; then
+    $doit $mkdircmd "$dst" \
+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+  else
+    dstfile=`basename "$dst"`
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+    trap '(exit $?); exit' 1 2 13 15
+
+    # Copy the file name to the temp name.
+    $doit $cpprog "$src" "$dsttmp" &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	       || {
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		 (exit 1); exit 1
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+    }
+  fi || { (exit 1); exit 1; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+  (exit 0); exit 0
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

admin/libtool/Makefile.am

@@ -0,0 +1 @@
+EXTRA_DIST = ltmain.sh config.guess config.sub

admin/libtool/Makefile.in

@@ -0,0 +1,373 @@
+# Makefile.in generated by automake 1.10 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = admin/libtool
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in config.guess \
+	config.sub ltmain.sh
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SS_CPPFLAGS = @SS_CPPFLAGS@
+SS_INCDIRS = @SS_INCDIRS@
+SS_LDFLAGS = @SS_LDFLAGS@
+SS_LIBDIRS = @SS_LIBDIRS@
+SS_LIBLINK = @SS_LIBLINK@
+SS_MSGFMT = @SS_MSGFMT@
+SS_PERL_BINARY = @SS_PERL_BINARY@
+SS_PERL_CCFLAGS = @SS_PERL_CCFLAGS@
+SS_PERL_LDFLAGS = @SS_PERL_LDFLAGS@
+SS_QT_MOC = @SS_QT_MOC@
+SS_QT_MOC_FLAGS = @SS_QT_MOC_FLAGS@
+SS_RPATH = @SS_RPATH@
+SS_TOPSRCDIR = @SS_TOPSRCDIR@
+STRIP = @STRIP@
+VERSION = @VERSION@
+XMKMF = @XMKMF@
+X_CFLAGS = @X_CFLAGS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_LIBS = @X_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+applnkdir = @applnkdir@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+configdir = @configdir@
+configmodulesdir = @configmodulesdir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+defscriptdir = @defscriptdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+globalkvircdir = @globalkvircdir@
+headersdir = @headersdir@
+helpdir = @helpdir@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+iconapps128datadir = @iconapps128datadir@
+iconapps16datadir = @iconapps16datadir@
+iconapps32datadir = @iconapps32datadir@
+iconapps48datadir = @iconapps48datadir@
+iconapps64datadir = @iconapps64datadir@
+iconappsscalabledatadir = @iconappsscalabledatadir@
+iconmime128datadir = @iconmime128datadir@
+iconmime16datadir = @iconmime16datadir@
+iconmime32datadir = @iconmime32datadir@
+iconmime48datadir = @iconmime48datadir@
+iconmime64datadir = @iconmime64datadir@
+iconmimescalabledatadir = @iconmimescalabledatadir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+kdeservicesdir = @kdeservicesdir@
+libdir = @libdir@
+libexecdir = @libexecdir@
+licensedir = @licensedir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mimelnkdir = @mimelnkdir@
+mkdir_p = @mkdir_p@
+modulelibdir = @modulelibdir@
+msgcolorsdir = @msgcolorsdir@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+picsdir = @picsdir@
+pluglibdir = @pluglibdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+themedir = @themedir@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+topdir = @topdir@
+EXTRA_DIST = ltmain.sh config.guess config.sub
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  admin/libtool/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  admin/libtool/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

admin/missing

@@ -0,0 +1,360 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2005-06-08.21
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+#   Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  tar)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

admin/mkcvstag.sh

@@ -0,0 +1,19 @@
+OLDTAG=`cat admin/src_cvstag`
+
+echo "Old CVSTAG is $OLDTAG"
+
+if test -f configure.in; then
+	echo "Requesting cvs log in the current directory"
+else
+	echo "This script must be called from the top source directory"
+	exit -1
+fi
+
+cvs log > cvs.log
+
+CVSTAG=`cat cvs.log | grep revision | grep -v total | wc -l`
+
+echo $CVSTAG > admin/src_cvstag
+
+
+echo "CVSTAG is $CVSTAG"

admin/objprelink.c

@@ -0,0 +1,530 @@
+/* objprelink -- prelinks c++ files for producing a more efficient dynlink.
+   Copyright 2001, Leon Bottou
+
+   This program is free software; you can redistribute it and/or modify ait
+   under the terms of the GNU General Public License as published by the Free
+   Software Foundation; either version 2 of the License, or (at your option)
+   any later version.  
+
+   Compile with: 
+      gcc -O2 -o objprelink objprelink.c /usr/lib/libbfd.a /usr/lib/libiberty.a
+
+   This is i386 only.
+   There is very experimental PPC support (totally unproven).
+*/
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <errno.h>
+#include <string.h> 
+#include <unistd.h>
+#include <sys/stat.h>
+#include <stdarg.h>
+#include "bfd.h"
+
+static int verbose = 0;
+static int replace = 1;
+static const char *target = 0;
+static const char *program_name = "objprelink";
+static const char *enomem = "out of memory";
+static const char *eassert = "assertion failed";
+
+static void
+fatal(const char *fname, int lineno, const char *msg)
+{
+  if (program_name)
+    fprintf(stderr,"%s ", program_name);
+  if (fname)
+    fprintf(stderr,"(%s:%d) ", fname, lineno);
+  if (program_name || fname)
+    fprintf(stderr," : ");
+  if (bfd_get_error() != bfd_error_no_error)
+    bfd_perror(msg);
+  else if (errno)
+    perror(msg);
+  else 
+    fprintf(stderr,"%s\n", msg);
+  exit(5);
+}
+
+#define FATAL(s) \
+  do{fatal(__FILE__,__LINE__,s);}while(0)
+#define ASSERT(x,s) \
+  do{if(!(x))fatal(__FILE__,__LINE__,s);}while(0)
+#define CLEARERR() \
+  do{errno=0;bfd_set_error(bfd_error_no_error);}while(0)
+
+static const char *
+M(const char *format, ...)
+{
+  static char buffer[256*256];
+  va_list ap;
+  va_start(ap, format);
+  vsprintf(buffer, format, ap);
+  va_end(ap);
+  return buffer;
+}
+
+static void
+usage(FILE *stream, int status)
+{
+  fprintf(stream,
+          "Usage: %s [-v] [-n] <objectfiles>\n"
+          "-- \"prelink\" c++ virtual tables\n"
+            "\n"
+          "This program massages object files in order to accelerate the loading\n"
+          "of shared object files (.so files) created by linking these object files.\n"
+          "This is intel specific at the moment\n"
+          "\n"
+          "The program scans the specified object file for linkonce sections\n"
+          "containing virtual tables with 32 bit absolute relocations (R_386_32)\n"
+          "to undefined procedures.  For each such procedure, it creates a linkonce\n"
+          "text section containing a relay jump.  All absolute relocations to this\n"
+          "procedure are then redirected to the single relay jump.\n"
+          "\n"
+          "Program objprelink should be called on all object files before linking.\n"
+          "\n"
+          "Option -v selects verbose mode\n"
+          "Option -n does not change the object files but generates a new object\n"
+          "whose name is composed by appending \".new\" to the original filename.\n",
+          program_name);
+  exit(status);
+}
+
+
+/* ---------------- MACHINE DEPENDENT PART ---- */
+
+static char *stub;
+static int stub_size;
+static int stub_alignment; 
+static void (*stub_install)(bfd*, asection*, asymbol**);
+
+static reloc_howto_type *howto_32;
+
+
+/* I386 */
+
+static char stub_i386[] = {
+  0xb8, 0, 0, 0, 0,               /* mov $0,%eax */
+  0xff, 0xe0                      /* jmp *(%eax) */
+};
+
+static void 
+stub_install_i386(bfd *obfd, asection *p, asymbol **jumpto)
+{
+  int status;
+  int relcount = 1;
+  arelent **reloc = (arelent**)bfd_alloc(obfd, sizeof(arelent*)*relcount);
+  arelent *relent = (arelent*)bfd_alloc(obfd, sizeof(arelent)*relcount);
+  ASSERT(reloc, enomem);
+  ASSERT(relent, enomem);
+  reloc[0] = &relent[0];
+  reloc[0]->sym_ptr_ptr = jumpto;
+  reloc[0]->address = 1;
+  reloc[0]->addend = 0;
+  reloc[0]->howto = howto_32;
+  bfd_set_reloc(obfd, p, reloc, relcount);
+  status = bfd_set_section_contents(obfd, p, stub, (file_ptr) 0, stub_size);
+  ASSERT(status, eassert);
+}
+
+/* PPC */
+
+static char stub_ppc[] = {
+  0x48, 0, 0, 0                    
+};
+
+static reloc_howto_type *howto_ppc_pltrel24;
+static reloc_howto_type *howto_ppc_rel24;
+
+static void
+stub_install_ppc(bfd *obfd, asection *p, asymbol **jumpto)
+{
+  int status;
+  int relcount = 1;
+  arelent **reloc = (arelent**)bfd_alloc(obfd, sizeof(arelent*)*relcount);
+  arelent *relent = (arelent*)bfd_alloc(obfd, sizeof(arelent)*relcount);
+  ASSERT(reloc, enomem);
+  ASSERT(relent, enomem);
+  reloc[0] = &relent[0];
+  reloc[0]->sym_ptr_ptr = jumpto;
+  reloc[0]->address = 0;
+  reloc[0]->addend = 0;
+  reloc[0]->howto = howto_ppc_pltrel24;  /* Second choice: howto_ppc_rel24 */
+  bfd_set_reloc(obfd, p, reloc, relcount);
+  status = bfd_set_section_contents(obfd, p, stub, (file_ptr) 0, stub_size);
+  ASSERT(status, eassert);
+}
+
+/* ALPHA */
+
+/* ALL */
+
+static void
+prepare_stub_data(bfd *obfd, asymbol **syms, int symcount)
+{
+  switch (bfd_get_arch(obfd))
+    {
+    case bfd_arch_i386:
+      stub = stub_i386;
+      stub_size = sizeof(stub_i386);
+      stub_install = stub_install_i386;
+      stub_alignment = 1;
+      break;
+      
+    case bfd_arch_powerpc:
+      fprintf(stderr,"Warning: PPC support is experimental\n");
+      howto_ppc_pltrel24 = bfd_reloc_type_lookup(obfd, BFD_RELOC_24_PLT_PCREL);
+      howto_ppc_rel24 = bfd_reloc_type_lookup(obfd, BFD_RELOC_PPC_B26);
+      ASSERT(howto_ppc_pltrel24, eassert);
+      ASSERT(howto_ppc_rel24, eassert);
+      stub = stub_ppc;
+      stub_size = sizeof(stub_ppc);
+      stub_install = stub_install_ppc;
+      stub_alignment = 2;
+      break;
+
+    default:
+      FATAL("This cpu architecture is not supported (yet)");
+      break;
+    }
+  howto_32 =  bfd_reloc_type_lookup(obfd, BFD_RELOC_32);
+  ASSERT(howto_32, eassert);
+}
+
+
+/* ---------- END OF MACHINE DEPENDENT PART ---- */
+
+
+
+/* Symbol hash table */
+
+typedef struct symbol_entry_s {
+  struct bfd_hash_entry root;
+  struct symbol_entry_s *next;
+  asection *relay;
+  asymbol  *sym;
+} symbol_entry;
+
+static struct bfd_hash_entry *
+init_symbol_entry(struct bfd_hash_entry *entry, 
+                  struct bfd_hash_table *table,
+                  const char *string)
+{
+  symbol_entry *ret = (symbol_entry*)entry;
+  if (! ret)
+    ret = (symbol_entry*)bfd_hash_allocate(table, sizeof(symbol_entry));
+  ASSERT(ret,eassert);
+  memset(ret, 0, sizeof(symbol_entry));
+  return bfd_hash_newfunc((struct bfd_hash_entry*)ret, table, string);
+}
+
+static symbol_entry *
+lookup_symbol(struct bfd_hash_table *table, const char *id, boolean create)
+{
+  return (symbol_entry*) bfd_hash_lookup(table, id, create, true);
+}
+
+/* Cached relocations stored 
+   in section userdata field */
+
+struct section_userdata {
+  int relcount;
+  arelent **reloc;
+};
+
+/* Check if section is a virtual table */
+
+static const char *
+is_vt_section(bfd *abfd, asection *p)
+{
+  const char *name = bfd_section_name(abfd, p);
+  static const char prefix[] = ".gnu.linkonce.d.__vt_";
+  static flagword w = (SEC_ALLOC|SEC_LOAD|SEC_RELOC|SEC_DATA|SEC_LINK_ONCE);
+  flagword f = bfd_get_section_flags (abfd, p);
+  if (f & w == w)
+    if (!strncmp(name, prefix, sizeof(prefix)-1))
+      return name + sizeof(prefix)-6;
+  return false;
+}
+
+/* Process one object file.
+   Returns true if a new file has been successfully created. */
+
+static boolean
+process(char *iname, char *oname)
+{
+
+  bfd *ibfd = 0;
+  bfd *obfd = 0;
+  int isymcount = 0;
+  asymbol **isyms = 0;
+  struct bfd_hash_table vtsymtab;
+  symbol_entry *vtsyms = 0;
+  int vtcount = 0;
+
+  int relcount;
+  arelent **reloc;
+  asection *p;
+  symbol_entry *hsym;
+  int storage_needed;
+  int status;
+  int i;
+
+  if (verbose)
+    printf("processing file %s\n", iname);
+
+  /* --- open bfds */
+  ibfd = bfd_openr (iname, target);
+  ASSERT(ibfd, M("cannot read file \"%s\"", iname));
+  if (! bfd_check_format(ibfd, bfd_object))
+    FATAL(M("file \"%s\" is not a regular object file", iname));
+  CLEARERR();
+
+  /* --- get input symbols */
+  storage_needed = bfd_get_symtab_upper_bound(ibfd);
+  ASSERT(storage_needed>=0, eassert);
+  isyms = (asymbol**) bfd_alloc(ibfd, storage_needed);
+  ASSERT(isyms, enomem);
+  isymcount = bfd_canonicalize_symtab(ibfd, isyms);
+  ASSERT(isymcount>=0, eassert);
+  CLEARERR();
+
+  /* --- prepare variables required for stub generation */
+  prepare_stub_data(ibfd, isyms, isymcount);
+
+  /* --- cache all relocation entries */
+  for (p=ibfd->sections; p; p=p->next)
+    {
+      const char *name = bfd_section_name(ibfd, p);
+      if (! strncmp(name, ".gnu.linkonce.t.stub.", 21))
+        {
+          if (verbose)
+            printf(" file has already been processed\n");
+          bfd_close(ibfd);
+          return false;
+        }
+      p->userdata = 0;
+      storage_needed = bfd_get_reloc_upper_bound(ibfd, p);
+      if (storage_needed > 0)
+        {
+          struct section_userdata *u = (void*)bfd_alloc(ibfd, sizeof(*u));
+          ASSERT(u, enomem);
+          memset(u, 0, sizeof(*u));
+          reloc = (arelent**)bfd_alloc(ibfd, storage_needed);
+          ASSERT(reloc, enomem);
+          relcount = bfd_canonicalize_reloc(ibfd, p, reloc, isyms);
+          ASSERT(relcount>=0, M("Problem with relocations for section %s in file %s", 
+                                bfd_section_name(ibfd,p), bfd_get_filename(ibfd)));
+          u->relcount = relcount;
+          u->reloc = reloc;
+          p->userdata = u;
+        }
+    }
+
+  /* --- construct hash table of vt undefined symbols */
+  memset(&vtsymtab, 0, sizeof(vtsymtab));
+  status = bfd_hash_table_init(&vtsymtab, init_symbol_entry);
+  ASSERT(status, eassert);
+  for (p=ibfd->sections; p; p=p->next)
+    {
+      const char *vtname = is_vt_section(ibfd, p);
+      if (vtname)
+        {
+          if (verbose)
+            printf(" scanning section \"%s\"\n",  vtname);
+          reloc = (p->userdata) ? ((struct section_userdata*)p->userdata)->reloc : 0;
+          relcount = (p->userdata) ? ((struct section_userdata*)p->userdata)->relcount : 0;
+          for (i=0; i<relcount; i++)
+            {
+              arelent *rel = reloc[i];
+              asymbol *sym = (rel->sym_ptr_ptr ? *rel->sym_ptr_ptr : 0);
+              if (sym &&
+                  rel->howto->type == howto_32->type && 
+                  !lookup_symbol(&vtsymtab, sym->name, false))
+                {
+                  hsym = lookup_symbol(&vtsymtab, sym->name, true);
+                  ASSERT(hsym, eassert);
+                  hsym->next = vtsyms;
+                  hsym->sym = sym;
+                  vtsyms = hsym;
+                  vtcount += 1;
+                }
+            }
+        }
+    }
+  if (verbose)
+    printf(" found %d symbols in need for a stub\n", vtcount);
+  if (! vtcount) 
+    {
+      bfd_hash_table_free(&vtsymtab);
+      bfd_close(ibfd);
+      return false;
+    }
+      
+  /* --- create output bfd */
+  obfd = bfd_openw (oname, bfd_get_target (ibfd));
+  ASSERT(obfd, M("cannot create file \"%s\"", iname));
+  bfd_set_format (obfd, bfd_get_format (ibfd));
+  bfd_set_start_address (obfd, bfd_get_start_address(ibfd));
+  bfd_set_file_flags (obfd, (bfd_get_file_flags (ibfd) & bfd_applicable_file_flags (obfd)));
+  bfd_set_arch_mach (obfd, bfd_get_arch (ibfd), bfd_get_mach (ibfd));
+
+  /* --- create copied sections */
+  for (p=ibfd->sections; p; p=p->next)
+    {
+      const char *err = M("cannot replicate section %s from file %s", 
+                          bfd_section_name (ibfd, p), iname);
+      asection *isection = p;
+      asection *osection = bfd_make_section_anyway (obfd, bfd_section_name (ibfd, isection));
+      ASSERT(osection, err);
+      status = bfd_set_section_size (obfd, osection, bfd_section_size (ibfd, isection));
+      ASSERT(status, err);
+      status = bfd_set_section_vma (obfd, osection, bfd_section_vma (ibfd, isection));
+      ASSERT(status, err);
+      osection->lma = isection->lma;
+      status = bfd_set_section_alignment(obfd, osection, bfd_section_alignment (ibfd, isection));
+      ASSERT(status, err);
+      status = bfd_set_section_flags(obfd, osection, bfd_get_section_flags (ibfd, isection));
+      ASSERT(status, err);
+      isection->output_section = osection;
+      isection->output_offset = 0;
+      status = bfd_copy_private_section_data (ibfd, isection, obfd, osection);
+      ASSERT(status, err);
+    }
+  
+  /* --- create stub sections */
+  if (verbose)
+    printf(" defining stub sections\n");
+  for (hsym=vtsyms; hsym; hsym=hsym->next)
+    {
+      asection *osection;
+      asymbol *sym;
+      char *name;
+      /* new section */
+      name = (char*)bfd_alloc(obfd, strlen(hsym->sym->name) + 28);
+      ASSERT(name, enomem);
+      strcpy(name,".gnu.linkonce.t.stub.");
+      strcat(name,hsym->sym->name);
+      hsym->relay = osection = bfd_make_section_anyway (obfd, name);
+      ASSERT(osection, enomem);
+      bfd_set_section_size(obfd, osection, stub_size);
+      bfd_set_section_alignment(obfd, osection, stub_alignment);
+      bfd_set_section_flags(obfd, osection, 
+                            SEC_HAS_CONTENTS|SEC_ALLOC|SEC_LOAD|
+                            SEC_RELOC|SEC_READONLY|SEC_CODE|SEC_LINK_ONCE);
+    }
+  
+  /* --- copy symbols */
+  bfd_set_symtab (obfd, isyms, isymcount);
+
+  /* --- copy section relocs and data */
+  if (verbose)
+    printf(" copying section data from %s\n", iname);
+  for (p=ibfd->sections; p; p=p->next)
+    {
+      const char *sname;
+      const char *err = M("cannot copy data from section %s in file %s", 
+                          bfd_section_name (ibfd, p), iname);
+      asection *isection = p;
+      asection *osection = p->output_section;
+      bfd_size_type size = bfd_get_section_size_before_reloc (isection);
+      /* copy relocs */
+      reloc = (p->userdata) ? ((struct section_userdata*)isection->userdata)->reloc : 0;
+      relcount = (p->userdata) ? ((struct section_userdata*)isection->userdata)->relcount : 0;
+      sname = is_vt_section(ibfd, isection);
+      if (sname)
+        {
+          if (verbose)
+            printf("  patching relocs for %s\n", sname);
+          for (i=0; i<relcount; i++)
+            {
+              arelent *rel = reloc[i];
+              asymbol *sym = (rel->sym_ptr_ptr ? *rel->sym_ptr_ptr : 0);
+              ASSERT(sym, eassert);
+              hsym = lookup_symbol(&vtsymtab, sym->name, false);
+              if (hsym)
+                rel->sym_ptr_ptr = hsym->relay->symbol_ptr_ptr;
+            }
+        }
+      bfd_set_reloc(obfd, osection, (relcount) ? reloc : 0, relcount);
+      /* copy data */
+      if (bfd_get_section_flags (ibfd, isection) & SEC_HAS_CONTENTS)
+        {
+          void *memchunk = malloc(size);
+          ASSERT(memchunk, enomem);
+          status = bfd_get_section_contents (ibfd, isection, memchunk, (file_ptr) 0, size);
+          ASSERT(status, eassert);
+          status = bfd_set_section_contents(obfd, osection, memchunk, (file_ptr) 0, size);
+          ASSERT(status, eassert);
+          free(memchunk);
+        }
+    }
+
+  /* --- generate relocs and data for stub sections */
+  for (hsym=vtsyms; hsym; hsym=hsym->next)
+    {
+      asection *osection = hsym->relay;
+      (*stub_install)(obfd, osection, &hsym->sym);
+    }
+  
+  /* --- copy private data */
+  status = bfd_copy_private_bfd_data (ibfd, obfd);
+  ASSERT(status, M("error copying private data for %s", iname));
+  
+  /* --- close bfds */
+  if (verbose)
+    printf(" finishing %s\n", iname);
+  status = bfd_close(obfd);
+  ASSERT(status, M("error while writing %s", oname));
+  bfd_close(ibfd);
+  
+  /* --- cleanup */
+  bfd_hash_table_free(&vtsymtab);
+  return true;
+}
+
+
+
+/* Main */
+
+int
+main(int argc, char **argv)
+{
+  int i;
+  int status = 0;
+  program_name = strrchr(argv[0],'/');
+  program_name = (program_name) ? program_name + 1 : argv[0];
+  if (argc < 2)
+    usage(stderr, 5);
+  bfd_init();
+  bfd_set_error_program_name(program_name);
+  for (i=1; i<argc; i++)
+    {
+      if (!strcmp(argv[i], "-v"))
+        verbose = 1;
+      else if (!strcmp(argv[i], "-n"))
+        replace = 0;
+      else if (!strncmp(argv[i], "--target=", 9))
+        target = argv[i] + 9;
+      else
+        {
+          char *name = argv[i];
+          char *newname = malloc(strlen(name) + 8);
+          ASSERT(newname,enomem);
+          strcpy(newname, name);
+          strcat(newname, ".new");
+          if (process(name, newname) && replace)
+            {
+              unlink(name);
+              link(newname, name);
+              unlink(newname);
+            }
+          free(newname);
+        }
+    }
+  /* Finished */
+  return status;
+}
+
+

admin/searchmetaob.sh

@@ -0,0 +1,31 @@
+#!/bin/bash
+
+DIRS=`find ../src/modules/ -type d -maxdepth 1`
+
+HERE=`pwd`
+
+echo "Looking for unregistered meta objects"
+
+for adir in $DIRS; do
+
+	cd $HERE
+	cd $adir
+
+	THEFILES=`ls | grep "\.h"`
+
+	if test -n "$THEFILES"; then
+
+		echo "Checking dir $adir"
+
+		OBJECTS=`grep -h -B 4 "Q_OBJECT" *.h | grep "class" | grep ":" | sed -e 's/class[ ]*//g' | sed -e 's/[ ]*:[A-Za-z0-9 ,]*//g'`
+
+		for aob in $OBJECTS; do
+			META=`grep "unregisterMetaObject(\"$aob\")" *.cpp`
+			if test -z "$META"; then
+				echo "Class $aob is NOT UNREGISTERED in $adir"
+			fi
+		done
+
+	fi
+
+done

admin/sedfiles.sh

@@ -0,0 +1,37 @@
+#!/bin/bash
+
+if test -z "$*"; then
+	echo "No files to parse"
+	exit
+fi
+
+
+SEARCH="contextStackSize"
+REPLACE="actualStackSize"
+
+echo "Searching for $SEARCH"
+echo "Replacing with $REPLACE"
+
+for afile in $*; do
+	DATA=`grep "$SEARCH" $afile`
+
+	if test -n "$DATA"; then
+
+		echo "Processing $afile ..."
+
+		rm -f $afile.backup
+		rm -f $afile.backup2
+
+		cp $afile $afile.backup
+
+		COMMAND="s/$SEARCH/$REPLACE/g"
+		echo "`cat $afile.backup | sed -e $COMMAND`" > $afile
+
+		if grep "$SEARCH" $afile; then
+			echo "Ops.. maybe it didn't work..."
+		else
+			echo "Ok, it worked."
+		fi
+	fi
+
+done

admin/src_cvstag

@@ -0,0 +1 @@
+12746

admin/src_date

@@ -0,0 +1 @@
+2005.02.26