tde-i18n/tde-i18n-zh_TW/messages/tdeedu/kmplot.po

# translation of kmplot.po to Chinese Traditional
# Copyright (C) 2002, 2006 Free Software Foundation, Inc.
#
# Sarah Smith <sarahs@redhat.com>, 2002.
# Xiong Jiang <jxiong@offtopic.org>, 2002.
# Funda Wang <fundawang@linux.net.cn>, 2004.
# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
msgid ""
msgstr ""
"Project-Id-Version: kmplot\n"
"POT-Creation-Date: 2008-07-08 01:24+0200\n"
"PO-Revision-Date: 2006-10-30 09:40+0800\n"
"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
"dot tw>\n"
"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"

#: kmplotio.cpp:229 kparametereditor.cpp:143
msgid "The file does not exist."
msgstr "檔案不存在。"

#: kmplotio.cpp:235 kmplotio.cpp:245 kparametereditor.cpp:154
#: kparametereditor.cpp:195
msgid "An error appeared when opening this file"
msgstr "開啟此檔案時發生錯誤"

#: kmplotio.cpp:250
msgid "The file could not be loaded"
msgstr "無法載入此檔案"

#: kmplotio.cpp:289
msgid "The file had an unknown version number"
msgstr "檔案的版本號未知"

#. i18n: file settingspagescaling.ui line 192
#: View.cpp:1147 kmplotio.cpp:326 rc.cpp:1360 rc.cpp:1441 rc.cpp:3014
#: rc.cpp:3095
#, no-c-format
msgid "automatic"
msgstr "自動"

#: kmplotio.cpp:541
msgid "The function %1 could not be loaded"
msgstr "無法載入函數 %1"

#: coordsconfigdialog.cpp:57 coordsconfigdialog.cpp:72 editfunction.cpp:220
#: keditparametric.cpp:154 keditpolar.cpp:138 kminmax.cpp:243
msgid "The minimum range value must be lower than the maximum range value"
msgstr "最小範圍值必須低於最大範圍值"

#: editfunction.cpp:311 keditparametric.cpp:177 keditpolar.cpp:160
#: kminmax.cpp:293
msgid "Function could not be found"
msgstr "找不到函數"

#: ksliderwindow.cpp:48
#, c-format
msgid "Slider %1"
msgstr "滑動器 %1"

#: ksliderwindow.cpp:49
#, c-format
msgid "Slider no. %1"
msgstr "第 %1 個滑動器"

#: ksliderwindow.cpp:50
msgid ""
"Move slider to change the parameter of the function plot connected to this "
"slider."
msgstr "移動滑動器可以更改與此滑動器相關的函數圖的參數。"

#: ksliderwindow.cpp:64
msgid "&Change Minimum Value"
msgstr "更改最小值(&C)"

#: ksliderwindow.cpp:66
msgid "&Change Maximum Value"
msgstr "更改最大值(&C)"

#: ksliderwindow.cpp:102
msgid "Change Minimum Value"
msgstr "更改最小值"

#: ksliderwindow.cpp:102
msgid "Type a new minimum value for the slider:"
msgstr "輸入滑動器的新最小值："

#: ksliderwindow.cpp:113
msgid "Change Maximum Value"
msgstr "更改最大值"

#: ksliderwindow.cpp:113
msgid "Type a new maximum value for the slider:"
msgstr "輸入滑動器的新最大值："

#: kprinterdlg.cpp:39
msgid "KmPlot Options"
msgstr "KmPlot 選項"

#: kprinterdlg.cpp:45
msgid "Print header table"
msgstr "列印標頭表格"

#: kprinterdlg.cpp:46
msgid "Transparent background"
msgstr "透明背景"

#: parser.cpp:534
msgid "This function is depending on an other function"
msgstr "此函數依賴其它函數"

#: parser.cpp:961
msgid ""
"Parser error at position %1:\n"
"Syntax error"
msgstr ""
"位置 %1 發生剖析錯誤：\n"
"語法錯誤"

#: parser.cpp:964
msgid ""
"Parser error at position %1:\n"
"Missing parenthesis"
msgstr ""
"位置 %1 發生剖析錯誤：\n"
"缺少括號"

#: parser.cpp:967
msgid ""
"Parser error at position %1:\n"
"Function name unknown"
msgstr ""
"位置 %1 發生剖析錯誤：\n"
"未知函數名稱"

#: parser.cpp:970
msgid ""
"Parser error at position %1:\n"
"Void function variable"
msgstr ""
"位置 %1 發生剖析錯誤：\n"
"無效函數變數"

#: parser.cpp:973
msgid ""
"Parser error at position %1:\n"
"Too many functions"
msgstr ""
"位置 %1 發生剖析錯誤：\n"
"函數過多"

#: parser.cpp:976
msgid ""
"Parser error at position %1:\n"
"Token-memory overflow"
msgstr ""
"位置 %1 發生剖析錯誤：\n"
"標記記憶體溢位"

#: parser.cpp:979
msgid ""
"Parser error at position %1:\n"
"Stack overflow"
msgstr ""
"位置 %1 發生剖析錯誤：\n"
"堆疊溢位"

#: parser.cpp:982
msgid ""
"Parser error at position %1:\n"
"Name of function not free."
msgstr ""
"位置 %1 發生剖析錯誤：\n"
"函數名稱不自由。"

#: parser.cpp:985
msgid ""
"Parser error at position %1:\n"
"recursive function not allowed."
msgstr ""
"位置 %1 發生剖析錯誤：\n"
"不允許遞迴函數。"

#: parser.cpp:988
#, c-format
msgid "Could not find a defined constant at position %1."
msgstr "在位置 %1 處找不到定義的常數。"

#: parser.cpp:991
msgid "Empty function"
msgstr "空函數"

#: parser.cpp:993
msgid "The function name is not allowed to contain capital letters."
msgstr "函數名不能有大寫字母。"

#: parser.cpp:995
msgid "Function could not be found."
msgstr "找不到函數。"

#: parser.cpp:997
msgid "The expression must not contain user-defined constants."
msgstr "列出使用者定義的常數。"

#: keditconstant.cpp:61
msgid "Please insert a valid constant name between A and Z."
msgstr "請插入一個 A 到 Z 之間的有效常數。"

#: keditconstant.cpp:78
msgid "The constant already exists."
msgstr "常數已經存在。"

#: _translatorinfo.cpp:1
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr ""
"簡體中文：Sarah Smith,Funda Wang\n"
"繁體中文轉換與修改：Frank Weng (a.k.a. Franklin)"

#: _translatorinfo.cpp:3
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr ""
"簡體中文：sarahs@redhat.com,fundawang@linux.net.cn\n"
"繁體中文轉換與修改：Frank Weng (a.k.a. Franklin)"

#: main.cpp:43
msgid "Mathematical function plotter for TDE"
msgstr "TDE 的數學函數繪圖器"

#: main.cpp:47
msgid "File to open"
msgstr "要開啟的檔案"

#: main.cpp:57
msgid "KmPlot"
msgstr "KmPlot"

#: main.cpp:63
msgid "Original Author"
msgstr "原作者"

#: main.cpp:66
msgid "GUI"
msgstr "使用者介面"

#: main.cpp:68
msgid "Various improvements"
msgstr "各種改進"

#: main.cpp:69
msgid "svg icon"
msgstr "SVG 圖示"

#: main.cpp:70
msgid "command line options, MIME type"
msgstr "命令列選項，MIME 類型"

#: keditparametric.cpp:108
msgid "Recursive function not allowed"
msgstr "不允許遞迴函數"

#: kparametereditor.cpp:81 kparametereditor.cpp:107
msgid "Parameter Value"
msgstr "參數值"

#: kparametereditor.cpp:81 kparametereditor.cpp:107
msgid "Enter a new parameter value:"
msgstr "請輸入新參數值："

#: kparametereditor.cpp:92
msgid "The value %1 already exists and will therefore not be added."
msgstr "值 %1 已經存在，所以不會新增。"

#: kparametereditor.cpp:119
msgid "The value %1 already exists."
msgstr "已經新增值 %1。"

#: kparametereditor.cpp:137 kparametereditor.cpp:205
msgid "*.txt|Plain Text File "
msgstr "*.txt|純文字檔案"

#: kparametereditor.cpp:182
msgid ""
"Line %1 is not a valid parameter value and will therefore not be included. Do "
"you want to continue?"
msgstr "第 %1 行不是有效的參數值，所以不會被引入。您要繼續嗎？"

#: kparametereditor.cpp:188
msgid "Would you like to be informed about other lines that cannot be read?"
msgstr "其它行不可讀時是否要通知您？"

#: kparametereditor.cpp:188
msgid "Get Informed"
msgstr "要通知"

#: kparametereditor.cpp:188
msgid "Ignore Information"
msgstr "不要通知"

#: MainDlg.cpp:271 MainDlg.cpp:296 kparametereditor.cpp:209
msgid ""
"A file named \"%1\" already exists. Are you sure you want to continue and "
"overwrite this file?"
msgstr "檔案 %1 已存在。您要繼續並覆寫此檔案嗎？"

#: MainDlg.cpp:271 MainDlg.cpp:296 kparametereditor.cpp:209
msgid "Overwrite File?"
msgstr "要覆寫檔案嗎？"

#: MainDlg.cpp:271 MainDlg.cpp:296 kparametereditor.cpp:209
msgid "&Overwrite"
msgstr "覆寫(&O)"

#: kparametereditor.cpp:234 kparametereditor.cpp:238 kparametereditor.cpp:263
msgid "An error appeared when saving this file"
msgstr "儲存檔案時發生錯誤"

#. i18n: file qminmax.ui line 52
#: kminmax.cpp:71 rc.cpp:745 rc.cpp:2399
#, no-c-format
msgid "Search between the x-value:"
msgstr "搜尋的 x 值範圍："

#. i18n: file qminmax.ui line 63
#: kminmax.cpp:72 kminmax.cpp:125 rc.cpp:748 rc.cpp:2402
#, no-c-format
msgid "and:"
msgstr "與："

#. i18n: file qminmax.ui line 27
#: kminmax.cpp:73 rc.cpp:742 rc.cpp:2396
#, no-c-format
msgid "&Find"
msgstr "尋找(&F)"

#: kminmax.cpp:74 kminmax.cpp:100 kminmax.cpp:118
msgid "Lower boundary of the plot range"
msgstr "繪圖範圍的下邊界"

#. i18n: file editfunctionpage.ui line 241
#: kminmax.cpp:75 kminmax.cpp:101 kminmax.cpp:119 rc.cpp:298 rc.cpp:624
#: rc.cpp:712 rc.cpp:1952 rc.cpp:2278 rc.cpp:2366
#, no-c-format
msgid ""
"Enter the lower boundary of the plot range. Expressions like 2*pi are allowed, "
"too."
msgstr "輸入繪圖範圍的下邊界。像 2*pi 這樣的表示式也可以。"

#: kminmax.cpp:76 kminmax.cpp:120
msgid "Upper boundary of the plot range"
msgstr "繪圖範圍的上邊界"

#. i18n: file editfunctionpage.ui line 269
#: kminmax.cpp:77 kminmax.cpp:121 rc.cpp:313 rc.cpp:618 rc.cpp:718 rc.cpp:1967
#: rc.cpp:2272 rc.cpp:2372
#, no-c-format
msgid ""
"Enter the upper boundary of the plot range. Expressions like 2*pi are allowed, "
"too."
msgstr "輸入繪圖範圍的上邊界。像 2*pi 這樣的表示式也可以。"

#: kminmax.cpp:81
msgid "Find Maximum Point"
msgstr "尋找最大值點"

#: kminmax.cpp:82
msgid "Search for the maximum point in the range you specified"
msgstr "在您指定的範圍搜尋最大值點"

#: kminmax.cpp:83
msgid ""
"Search for the highest y-value in the x-range you specified and show the result "
"in a message box."
msgstr "在您指定的 x 範圍內搜尋最大的 y 值，並在訊息盒中顯示結果。"

#. i18n: file qminmax.ui line 16
#: kminmax.cpp:87 rc.cpp:739 rc.cpp:2393
#, no-c-format
msgid "Find Minimum Point"
msgstr "尋找最小值點"

#: kminmax.cpp:88
msgid "Search for the minimum point in the range you specified"
msgstr "在您指定的範圍搜尋最小值點"

#: kminmax.cpp:89
msgid ""
"Search for the lowest y-value in the x-range you specified and show the result "
"in a message box."
msgstr "在您指定的 x 範圍內搜尋最小的 y 值，並在訊息盒中顯示結果。"

#: kminmax.cpp:94
msgid "Get y-Value"
msgstr "取得 y 值"

#: kminmax.cpp:95
msgid "X:"
msgstr "X："

#: kminmax.cpp:96
msgid "Y:"
msgstr "Y："

#: kminmax.cpp:102
msgid "No returned y-value yet"
msgstr "尚未返回 y 值"

#: kminmax.cpp:103
msgid ""
"Here you will see the y-value which you got from the x-value in the textbox "
"above. To calculate the y-value, press the Calculate button."
msgstr "您將在此看到與上面文字框中 x 值對應的 y 值。要計算 y 值，請按計算按鈕。"

#: kminmax.cpp:105 kminmax.cpp:126
msgid "&Calculate"
msgstr "計算(&C)"

#: kminmax.cpp:106
msgid "Get the y-value from the x-value you typed"
msgstr "獲得與您輸入的 x 值對應的 y 值"

#: kminmax.cpp:107
msgid ""
"Get the y-value from the x-value you typed and show it in the y-value box."
msgstr "獲得與您輸入的 x 值對應的 y 值，然後在 y 值框中顯示。"

#: kminmax.cpp:123
msgid "Calculate Integral"
msgstr "計算積分"

#: kminmax.cpp:124
msgid "Calculate the integral between the x-values:"
msgstr "計算 x 值之間的積分："

#: kminmax.cpp:127
msgid "Calculate the integral between the x-values"
msgstr "計算 x 值之間的積分"

#: kminmax.cpp:128
msgid ""
"Calculate the numeric integral between the x-values and draw the result as an "
"area."
msgstr "計算 x 值和繪製結果所圍成區域的定積分"

#: kminmax.cpp:221
msgid "Please choose a function"
msgstr "請選擇函數"

#: editfunction.cpp:229 kminmax.cpp:251
msgid "Please insert a minimum and maximum range between %1 and %2"
msgstr "請插入 %1 和 %2 之間的最小值和最大值範圍"

#: kminmax.cpp:301
msgid "You must choose a parameter for that function"
msgstr "您必須為函數選擇參數"

#: kminmax.cpp:311
msgid ""
"Minimum value:\n"
"x: %1\n"
"y: %2"
msgstr ""
"最小值：\n"
"x：%1\n"
"y：%2"

#: kminmax.cpp:317
msgid ""
"Maximum value:\n"
"x: %1\n"
"y: %2"
msgstr ""
"最大值：\n"
"x：%1\n"
"y：%2"

#: kminmax.cpp:328
msgid "The returned y-value"
msgstr "返回的 y 值"

#: kminmax.cpp:329
msgid ""
"Here you see the result of the calculation: the returned y-value you got from "
"the x-value in the textbox above"
msgstr "您可在此看到計算結果：你得到的 y 值與上方文字框中的 x 值相對應"

#: kminmax.cpp:339
msgid ""
"The integral in the interval [%1, %2] is:\n"
"%3"
msgstr ""
"[%1，%2]內的積分是：\n"
"%3"

#: kminmax.cpp:344
msgid "The operation was cancelled by the user."
msgstr "操作已被使用者取消。"

#: kminmax.cpp:420
msgid "Choose Parameter"
msgstr "選擇參數"

#: kminmax.cpp:420
msgid "Choose a parameter to use:"
msgstr "選擇要使用的參數："

#: kmplot.cpp:77
msgid "Could not find KmPlot's part."
msgstr "找不到 KmPlot 部件。"

#: kmplot.cpp:228
msgid ""
"*.fkt|KmPlot Files (*.fkt)\n"
"*.*|All Files"
msgstr ""
"*.fkt|KmPlot 檔案 (*.fkt)\n"
"*.*|所有檔案"

#: FktDlg.cpp:188 MainDlg.cpp:466
msgid "New Function Plot"
msgstr "新增函數圖"

#. i18n: file editfunctionpage.ui line 19
#: FktDlg.cpp:189 View.cpp:1940 rc.cpp:210 rc.cpp:1864
#, no-c-format
msgid "Edit Function Plot"
msgstr "編輯函數圖"

#: FktDlg.cpp:213 MainDlg.cpp:479 View.cpp:1928
msgid "New Parametric Plot"
msgstr "新增參數方程式圖"

#: FktDlg.cpp:239 MainDlg.cpp:492
msgid "New Polar Plot"
msgstr "新增極座標圖"

#. i18n: file kmplot_part.rc line 23
#: rc.cpp:6
#, no-c-format
msgid "&Plot"
msgstr "繪圖(&P)"

#. i18n: file kmplot_part.rc line 47
#: rc.cpp:18 rc.cpp:36
#, no-c-format
msgid "Show S&liders"
msgstr "顯示滑動器(&L)"

#. i18n: file FktDlgData.ui line 22
#: rc.cpp:54 rc.cpp:1708
#, no-c-format
msgid "Edit Plots"
msgstr "編輯圖"

#. i18n: file FktDlgData.ui line 75
#: rc.cpp:63 rc.cpp:1717
#, no-c-format
msgid "apply the changes and close the dialog"
msgstr "套用更改並關閉對話框"

#. i18n: file FktDlgData.ui line 78
#: rc.cpp:66 rc.cpp:1720
#, no-c-format
msgid "Click here to apply your changes and close this dialog."
msgstr "單擊此處套用您的更改並關閉此對話框。"

#. i18n: file FktDlgData.ui line 89
#: rc.cpp:72 rc.cpp:1726
#, no-c-format
msgid "cancel without any changes"
msgstr "不更改直接取消"

#. i18n: file FktDlgData.ui line 92
#: rc.cpp:75 rc.cpp:1729
#, no-c-format
msgid "Click here to close the dialog without any changes."
msgstr "單擊此處關閉對話框而不進行更改。"

#. i18n: file FktDlgData.ui line 130
#: rc.cpp:78 rc.cpp:1732
#, no-c-format
msgid "list of functions to be plotted"
msgstr "要繪圖的函數列表"

#. i18n: file FktDlgData.ui line 133
#: rc.cpp:81 rc.cpp:1735
#, no-c-format
msgid ""
"Here you see the list of all functions to be plotted. The checked functions are "
"visible, the others are hidden. Click on a checkbox to show or hide the "
"function."
msgstr "您可在此看到要進行繪圖的全部函數的清單。選中的函數是可見的，其它函數是不可見的。點選勾選盒可以顯示或隱藏函數。"

#. i18n: file FktDlgData.ui line 155
#: rc.cpp:87 rc.cpp:1741
#, no-c-format
msgid "delete the selected function"
msgstr "刪除選中的函數"

#. i18n: file FktDlgData.ui line 158
#: rc.cpp:90 rc.cpp:1744
#, no-c-format
msgid "Click here to delete the selected function from the list."
msgstr "單擊此處從列表中刪除選中的函數。"

#. i18n: file FktDlgData.ui line 177
#: rc.cpp:93 rc.cpp:1747
#, no-c-format
msgid "&Edit..."
msgstr "編輯(&E)..."

#. i18n: file FktDlgData.ui line 180
#: rc.cpp:96 rc.cpp:1750
#, no-c-format
msgid "edit the selected function"
msgstr "編輯選中函數"

#. i18n: file FktDlgData.ui line 183
#: rc.cpp:99 rc.cpp:1753
#, no-c-format
msgid "Click here to edit the selected function."
msgstr "單擊此處編輯選中函數。"

#. i18n: file FktDlgData.ui line 199
#: rc.cpp:102 rc.cpp:1756
#, no-c-format
msgid "Ne&w Function Plot..."
msgstr "新增函數圖(&W)..."

#. i18n: file FktDlgData.ui line 205
#: rc.cpp:105 rc.cpp:114 rc.cpp:123 rc.cpp:132 rc.cpp:141 rc.cpp:1759
#: rc.cpp:1768 rc.cpp:1777 rc.cpp:1786 rc.cpp:1795
#, no-c-format
msgid "define a new function"
msgstr "定義新函數"

#. i18n: file FktDlgData.ui line 208
#: rc.cpp:108 rc.cpp:117 rc.cpp:126 rc.cpp:135 rc.cpp:144 rc.cpp:1762
#: rc.cpp:1771 rc.cpp:1780 rc.cpp:1789 rc.cpp:1798
#, no-c-format
msgid ""
"Click here to define a new function. There are 3 types of function, explicit "
"given functions, parametric plots and polar plots. Choose the appropriate type "
"from the drop down list."
msgstr "單擊此處定義新函數。您可選擇三種函數類型之一，外部函數、參數函數和極座標函數。您可從下拉列表中選擇相應的類型。"

#. i18n: file FktDlgData.ui line 224
#: rc.cpp:111 rc.cpp:1765
#, no-c-format
msgid "New &Parametric Plot..."
msgstr "新增參數方程式圖(&P)..."

#. i18n: file FktDlgData.ui line 246
#: rc.cpp:120 rc.cpp:1774
#, no-c-format
msgid "&New Polar Plot..."
msgstr "新增極座標圖(&N)..."

#. i18n: file FktDlgData.ui line 288
#: rc.cpp:129 rc.cpp:1783
#, no-c-format
msgid "Cop&y Function..."
msgstr "複製函數(&Y)..."

#. i18n: file FktDlgData.ui line 313
#: rc.cpp:138 rc.cpp:1792
#, no-c-format
msgid "&Move Function..."
msgstr "移動函數(&M)..."

#. i18n: file editderivativespage.ui line 16
#: rc.cpp:147 rc.cpp:1801
#, no-c-format
msgid "Edit Derivatives"
msgstr "編輯導函數"

#. i18n: file editderivativespage.ui line 47
#: rc.cpp:150 rc.cpp:183 rc.cpp:322 rc.cpp:385 rc.cpp:549 rc.cpp:661
#: rc.cpp:1804 rc.cpp:1837 rc.cpp:1976 rc.cpp:2039 rc.cpp:2203 rc.cpp:2315
#, no-c-format
msgid "color of the plot line"
msgstr "繪圖線的顏色"

#. i18n: file editderivativespage.ui line 50
#: rc.cpp:153 rc.cpp:186 rc.cpp:325 rc.cpp:388 rc.cpp:552 rc.cpp:664
#: rc.cpp:1807 rc.cpp:1840 rc.cpp:1979 rc.cpp:2042 rc.cpp:2206 rc.cpp:2318
#, no-c-format
msgid "Click this button to choose a color for the plot line."
msgstr "單擊此按鈕選擇繪圖線的顏色。"

#. i18n: file editderivativespage.ui line 58
#: rc.cpp:156 rc.cpp:198 rc.cpp:337 rc.cpp:400 rc.cpp:564 rc.cpp:676
#: rc.cpp:1810 rc.cpp:1852 rc.cpp:1991 rc.cpp:2054 rc.cpp:2218 rc.cpp:2330
#, no-c-format
msgid "0.1mm"
msgstr "0.1mm"

#. i18n: file editderivativespage.ui line 66
#: rc.cpp:159 rc.cpp:1813
#, no-c-format
msgid "&Color:"
msgstr "顏色(&C)："

#. i18n: file editderivativespage.ui line 83
#: rc.cpp:162 rc.cpp:192 rc.cpp:331 rc.cpp:394 rc.cpp:558 rc.cpp:670
#: rc.cpp:1816 rc.cpp:1846 rc.cpp:1985 rc.cpp:2048 rc.cpp:2212 rc.cpp:2324
#, no-c-format
msgid "width of the plot line"
msgstr "繪圖線的寬度"

#. i18n: file editderivativespage.ui line 86
#: rc.cpp:165 rc.cpp:195 rc.cpp:334 rc.cpp:397 rc.cpp:561 rc.cpp:673
#: rc.cpp:1819 rc.cpp:1849 rc.cpp:1988 rc.cpp:2051 rc.cpp:2215 rc.cpp:2327
#, no-c-format
msgid "Change the width of the plot line in steps of 0.1mm."
msgstr "繪圖線寬每次增加 0.1 毫米。"

#. i18n: file editderivativespage.ui line 94
#: rc.cpp:168 rc.cpp:1822
#, no-c-format
msgid "Show &1st derivative"
msgstr "顯示一階導函數(&1)"

#. i18n: file editderivativespage.ui line 97
#: rc.cpp:171 rc.cpp:1825
#, no-c-format
msgid "Show first derivative"
msgstr "顯示一階導函數"

#. i18n: file editderivativespage.ui line 100
#: rc.cpp:174 rc.cpp:207 rc.cpp:1828 rc.cpp:1861
#, no-c-format
msgid "If this box is checked, the first derivative will be plotted, too."
msgstr "如果勾選此項目，也將繪製一階導函數。"

#. i18n: file editderivativespage.ui line 108
#: rc.cpp:177 rc.cpp:1831
#, no-c-format
msgid "&Line width:"
msgstr "線寬(&L)："

#. i18n: file editderivativespage.ui line 135
#: rc.cpp:180 rc.cpp:546 rc.cpp:658 rc.cpp:1834 rc.cpp:2200 rc.cpp:2312
#, no-c-format
msgid "Colo&r:"
msgstr "顏色(&R)"

#. i18n: file editderivativespage.ui line 163
#: rc.cpp:189 rc.cpp:328 rc.cpp:555 rc.cpp:667 rc.cpp:1177 rc.cpp:1843
#: rc.cpp:1982 rc.cpp:2209 rc.cpp:2321 rc.cpp:2831
#, no-c-format
msgid "Line &width:"
msgstr "線寬(&W)："

#. i18n: file editderivativespage.ui line 199
#: rc.cpp:201 rc.cpp:1855
#, no-c-format
msgid "Show &2nd derivative"
msgstr "顯示二階導函數(&2)"

#. i18n: file editderivativespage.ui line 202
#: rc.cpp:204 rc.cpp:1858
#, no-c-format
msgid "Show second derivative"
msgstr "顯示二階導函數"

#. i18n: file editfunctionpage.ui line 36
#: rc.cpp:213 rc.cpp:484 rc.cpp:630 rc.cpp:1867 rc.cpp:2138 rc.cpp:2284
#, no-c-format
msgid "Definition"
msgstr "定義"

#. i18n: file editfunctionpage.ui line 47
#: rc.cpp:216 rc.cpp:1870
#, no-c-format
msgid "&Equation:"
msgstr "方程式(&E)："

#. i18n: file editfunctionpage.ui line 66
#: rc.cpp:219 rc.cpp:1873
#, no-c-format
msgid "enter an equation, for instance f(x)=x^2"
msgstr "輸入一個方程式，如 f(x)=x^2"

#. i18n: file editfunctionpage.ui line 70
#: rc.cpp:222 rc.cpp:1876
#, no-c-format
msgid ""
"Enter an equation for the function.\n"
"Example: f(x)=x^2"
msgstr ""
"輸入一個函數方程式。\n"
"如：f(x)=x^2"

#. i18n: file editfunctionpage.ui line 80
#: rc.cpp:226 rc.cpp:534 rc.cpp:646 rc.cpp:1880 rc.cpp:2188 rc.cpp:2300
#, no-c-format
msgid "Extensions"
msgstr "擴展"

#. i18n: file editfunctionpage.ui line 91
#: MainDlg.cpp:193 rc.cpp:229 rc.cpp:1883
#, no-c-format
msgid "&Hide"
msgstr "隱藏(&H)"

#. i18n: file editfunctionpage.ui line 94
#: rc.cpp:232 rc.cpp:346 rc.cpp:540 rc.cpp:652 rc.cpp:1886 rc.cpp:2000
#: rc.cpp:2194 rc.cpp:2306
#, no-c-format
msgid "hide the plot"
msgstr "隱藏圖像"

#. i18n: file editfunctionpage.ui line 97
#: rc.cpp:235 rc.cpp:349 rc.cpp:543 rc.cpp:655 rc.cpp:1889 rc.cpp:2003
#: rc.cpp:2197 rc.cpp:2309
#, no-c-format
msgid "Check this box if you want to hide the plot of the function."
msgstr "如果您想要隱藏函數圖像，請勾選此項目。"

#. i18n: file editfunctionpage.ui line 107
#: rc.cpp:238 rc.cpp:1892
#, no-c-format
msgid "Parameter Values"
msgstr "參數值"

#. i18n: file editfunctionpage.ui line 118
#: rc.cpp:241 rc.cpp:1895
#, no-c-format
msgid "Use"
msgstr "使用"

#. i18n: file editfunctionpage.ui line 121
#: rc.cpp:244 rc.cpp:1898
#, no-c-format
msgid "change parameter value by moving a slider"
msgstr "移動滑動器更改參數值"

#. i18n: file editfunctionpage.ui line 124
#: rc.cpp:247 rc.cpp:1901
#, no-c-format
msgid ""
"Check this to change the parameter value by moving a slider. Select the slider "
"from the list box on the right. The values vary from 0 (left) to 100 (right)."
msgstr "勾選此項目可透過移動滑動器更改參數值。從右側的列表框中選擇滑動器。值的變化範圍是 0(最左側) 到 100(最右側)。"

#. i18n: file editfunctionpage.ui line 135
#: rc.cpp:250 rc.cpp:1904
#, no-c-format
msgid "Select a slider"
msgstr "選擇滑動器"

#. i18n: file editfunctionpage.ui line 138
#: rc.cpp:253 rc.cpp:1907
#, no-c-format
msgid ""
"Select one of the sliders to change the parameter value dynamically. The values "
"vary from 0 (left) to 100 (right)."
msgstr "選擇滑動器之一，以便動態更改參數值。值的變化範圍是 0(最左側) 到 100(最右側)。"

#. i18n: file editfunctionpage.ui line 146
#: rc.cpp:256 rc.cpp:1910
#, no-c-format
msgid "Values from a list"
msgstr "列表中的值"

#. i18n: file editfunctionpage.ui line 149
#: rc.cpp:259 rc.cpp:1913
#, no-c-format
msgid "read parameter values from a list"
msgstr "從列表中讀取參數值"

#. i18n: file editfunctionpage.ui line 152
#: rc.cpp:262 rc.cpp:1916
#, no-c-format
msgid ""
"Check this to let KmPlot use parameter values given in a list. Edit this list "
"by clicking the button on the right."
msgstr "勾選此項目可讓 KmPlot 使用列表中給出的參數值。單擊右側按鈕可編輯此列表。"

#. i18n: file editfunctionpage.ui line 163
#: rc.cpp:265 rc.cpp:1919
#, no-c-format
msgid "Edit List..."
msgstr "編輯列表..."

#. i18n: file editfunctionpage.ui line 166
#: rc.cpp:268 rc.cpp:1922
#, no-c-format
msgid "Edit the list of parameters"
msgstr "編輯參數列表"

#. i18n: file editfunctionpage.ui line 169
#: rc.cpp:271 rc.cpp:1925
#, no-c-format
msgid ""
"Click here to open a list of parameter values. Here you can add, remove, and "
"change them."
msgstr "單擊此處可開啟參數值列表。您可在此新增、刪除或進行更改。"

#. i18n: file editfunctionpage.ui line 177
#: rc.cpp:274 rc.cpp:1928
#, no-c-format
msgid "Disable parameter values"
msgstr "關閉參數值"

#. i18n: file editfunctionpage.ui line 183
#: rc.cpp:277 rc.cpp:1931
#, no-c-format
msgid "Do not use any parameter values"
msgstr "不使用任何參數值"

#. i18n: file editfunctionpage.ui line 186
#: rc.cpp:280 rc.cpp:1934
#, no-c-format
msgid ""
"By having this option selected parameter values are disabled in the function."
msgstr "選中此選項將在函數中關閉參數值。"

#. i18n: file editfunctionpage.ui line 210
#: rc.cpp:283 rc.cpp:1937
#, no-c-format
msgid "Custom plot m&inimum-range:"
msgstr "自訂最小繪圖範圍(&I)："

#. i18n: file editfunctionpage.ui line 213
#: rc.cpp:286 rc.cpp:609 rc.cpp:1940 rc.cpp:2263
#, no-c-format
msgid "Customize the minimum plot range"
msgstr "自訂最小繪圖範圍"

#. i18n: file editfunctionpage.ui line 216
#: rc.cpp:289 rc.cpp:307 rc.cpp:1943 rc.cpp:1961
#, no-c-format
msgid "Check this button and enter the plot range boundarys below."
msgstr "勾選此項目並在下方輸入繪圖範圍邊界。"

#. i18n: file editfunctionpage.ui line 224
#: rc.cpp:292 rc.cpp:591 rc.cpp:1946 rc.cpp:2245
#, no-c-format
msgid "&Min:"
msgstr "最小(&M)："

#. i18n: file editfunctionpage.ui line 238
#: rc.cpp:295 rc.cpp:621 rc.cpp:709 rc.cpp:1949 rc.cpp:2275 rc.cpp:2363
#, no-c-format
msgid "lower boundary of the plot range"
msgstr "繪圖範圍的下邊界"

#. i18n: file editfunctionpage.ui line 249
#: rc.cpp:301 rc.cpp:1955
#, no-c-format
msgid "Custom plot m&aximum-range:"
msgstr "自訂最大繪圖範圍(&A)："

#. i18n: file editfunctionpage.ui line 252
#: rc.cpp:304 rc.cpp:600 rc.cpp:733 rc.cpp:1958 rc.cpp:2254 rc.cpp:2387
#, no-c-format
msgid "Customize the maximum plot range"
msgstr "自訂最大繪圖範圍"

#. i18n: file editfunctionpage.ui line 266
#: rc.cpp:310 rc.cpp:615 rc.cpp:715 rc.cpp:1964 rc.cpp:2269 rc.cpp:2369
#, no-c-format
msgid "upper boundary of the plot range"
msgstr "繪圖範圍的上邊界"

#. i18n: file editfunctionpage.ui line 277
#: rc.cpp:316 rc.cpp:1970
#, no-c-format
msgid "Ma&x:"
msgstr "最大(&X)："

#. i18n: file editfunctionpage.ui line 304
#: rc.cpp:319 rc.cpp:1973
#, no-c-format
msgid "Co&lor:"
msgstr "顏色(&L)："

#. i18n: file editintegralpage.ui line 16
#: editfunction.cpp:66 rc.cpp:340 rc.cpp:1994
#, no-c-format
msgid "Integral"
msgstr "積分"

#. i18n: file editintegralpage.ui line 27
#: rc.cpp:343 rc.cpp:1997
#, no-c-format
msgid "Show integral"
msgstr "顯示積分"

#. i18n: file editintegralpage.ui line 44
#: rc.cpp:352 rc.cpp:2006
#, no-c-format
msgid "Initial Point"
msgstr "起始點"

#. i18n: file editintegralpage.ui line 55
#: rc.cpp:355 rc.cpp:2009
#, no-c-format
msgid "&x-value:"
msgstr "x 值(&X)："

#. i18n: file editintegralpage.ui line 66
#: rc.cpp:358 rc.cpp:2012
#, no-c-format
msgid "&y-value:"
msgstr "y 值(&Y)："

#. i18n: file editintegralpage.ui line 77
#: rc.cpp:361 rc.cpp:2015
#, no-c-format
msgid "Enter the initial x-point,for instance 2 or pi"
msgstr "輸入起始點的 x 值，如 2 或 pi"

#. i18n: file editintegralpage.ui line 80
#: rc.cpp:364 rc.cpp:2018
#, no-c-format
msgid ""
"Enter the initial x-value or expression for the integral, for example 2 or pi/2"
msgstr "輸入積分起始點的 x 值或表示式，如 2 或 pi/2"

#. i18n: file editintegralpage.ui line 88
#: rc.cpp:367 rc.cpp:2021
#, no-c-format
msgid "enter the initial y-point, eg 2 or pi"
msgstr "輸入起始點的 y 值，如 2 或 pi"

#. i18n: file editintegralpage.ui line 91
#: rc.cpp:370 rc.cpp:2024
#, no-c-format
msgid ""
"Enter the initial y-value or expression for the integral, for example 2 or pi/2"
msgstr "輸入積分起始點的 y 值或表示式，如 2 或 pi/2"

#. i18n: file editintegralpage.ui line 118
#: rc.cpp:373 rc.cpp:2027
#, no-c-format
msgid "P&recision:"
msgstr "精確度(&R)："

#. i18n: file editintegralpage.ui line 140
#: rc.cpp:376 rc.cpp:2030
#, no-c-format
msgid "Custom &precision"
msgstr "自訂精確度(&P)"

#. i18n: file editintegralpage.ui line 143
#: rc.cpp:379 rc.cpp:2033
#, no-c-format
msgid "Customize the precision"
msgstr "自訂精確度"

#. i18n: file editintegralpage.ui line 170
#: rc.cpp:382 rc.cpp:2036
#, no-c-format
msgid "Color:"
msgstr "顏色："

#. i18n: file editintegralpage.ui line 192
#: rc.cpp:391 rc.cpp:2045
#, no-c-format
msgid "Line width:"
msgstr "線寬："

#. i18n: file qconstanteditor.ui line 16
#: rc.cpp:403 rc.cpp:2057
#, no-c-format
msgid "Constant Editor"
msgstr "常數編輯器"

#. i18n: file qconstanteditor.ui line 33
#: rc.cpp:409 rc.cpp:817 rc.cpp:2063 rc.cpp:2471
#, no-c-format
msgid "delete selected constant"
msgstr "刪除選中的常數"

#. i18n: file qconstanteditor.ui line 36
#: rc.cpp:412 rc.cpp:820 rc.cpp:2066 rc.cpp:2474
#, no-c-format
msgid ""
"Click here to delete the selected constant; it can only be removed if it is not "
"currently used by a plot."
msgstr "單擊此處刪除選中的常數；僅當該常數不被任何圖像使用時，才可刪除該常數。"

#. i18n: file qconstanteditor.ui line 47
#: rc.cpp:415 rc.cpp:781 rc.cpp:2069 rc.cpp:2435
#, no-c-format
msgid "&Change Value..."
msgstr "更改值(&C)..."

#. i18n: file qconstanteditor.ui line 50
#: rc.cpp:418 rc.cpp:784 rc.cpp:2072 rc.cpp:2438
#, no-c-format
msgid "Change the value of a user-defined constant"
msgstr "更改使用者定義的常數值"

#. i18n: file qconstanteditor.ui line 53
#: rc.cpp:421 rc.cpp:787 rc.cpp:2075 rc.cpp:2441
#, no-c-format
msgid ""
"Click here to edit the value of the selected constant. Its name cannot be "
"changed."
msgstr "單擊此處更改選中常數的值。您無法更改其名稱。"

#. i18n: file qconstanteditor.ui line 64
#: rc.cpp:424 rc.cpp:2078
#, no-c-format
msgid "D&uplicate"
msgstr "複製(&U)"

#. i18n: file qconstanteditor.ui line 67
#: rc.cpp:427 rc.cpp:2081
#, no-c-format
msgid "Duplicate the selected constant"
msgstr "複製選中的常數"

#. i18n: file qconstanteditor.ui line 70
#: rc.cpp:430 rc.cpp:2084
#, no-c-format
msgid ""
"Click here to Copy the selected constant to another constant. You can choose "
"the new name from a list."
msgstr "單擊此處將把選中的常數複製到另外一個常數中。您可以從列表中選擇一個新名稱。"

#. i18n: file qconstanteditor.ui line 78
#: rc.cpp:433 rc.cpp:796 rc.cpp:2087 rc.cpp:2450
#, no-c-format
msgid "&New..."
msgstr "新增(&N)..."

#. i18n: file qconstanteditor.ui line 81
#: rc.cpp:436 rc.cpp:799 rc.cpp:2090 rc.cpp:2453
#, no-c-format
msgid "Add a new constant"
msgstr "新增新常數"

#. i18n: file qconstanteditor.ui line 84
#: rc.cpp:439 rc.cpp:802 rc.cpp:2093 rc.cpp:2456
#, no-c-format
msgid "Click this button to add a new constant."
msgstr "單擊此按鈕可新增一個新常數。"

#. i18n: file qconstanteditor.ui line 90
#: rc.cpp:442 rc.cpp:2096
#, no-c-format
msgid "Variable"
msgstr "變數"

#. i18n: file qconstanteditor.ui line 101
#: rc.cpp:445 rc.cpp:2099
#, no-c-format
msgid "Value"
msgstr "值"

#. i18n: file qconstanteditor.ui line 120
#: rc.cpp:448 rc.cpp:2102
#, no-c-format
msgid "List of user-defined constants"
msgstr "列出使用者定義的常數"

#. i18n: file qconstanteditor.ui line 123
#: rc.cpp:451 rc.cpp:2105
#, no-c-format
msgid "Select a constant to change its value, remove it or duplicate it."
msgstr "選擇一個常數以便更改其值，刪除它或複製它。"

#. i18n: file qeditconstant.ui line 16
#: rc.cpp:454 rc.cpp:2108
#, no-c-format
msgid "Edit Constant"
msgstr "編輯常數"

#. i18n: file qeditconstant.ui line 30
#: rc.cpp:457 rc.cpp:2111
#, no-c-format
msgid "Variable:"
msgstr "變數："

#. i18n: file qeditconstant.ui line 38
#: rc.cpp:460 rc.cpp:2114
#, no-c-format
msgid "Value:"
msgstr "值："

#. i18n: file qeditconstant.ui line 95
#: rc.cpp:469 rc.cpp:2123
#, no-c-format
msgid "Name of the constant (only 1 character but \"E\")"
msgstr "常數名稱(只能是一個字符，但不能是“E”)"

#. i18n: file qeditconstant.ui line 98
#: rc.cpp:472 rc.cpp:2126
#, no-c-format
msgid ""
"Enter the name of the constant here. User-defined constant names only have 1 "
"character; the constant \"E\" (Euler number) is reserved."
msgstr "在此輸入常數的名稱。使用者定義的常數只能有一個字符；常數“E”（尤拉常數，Euler number）已被保留。"

#. i18n: file qeditconstant.ui line 106
#: rc.cpp:475 rc.cpp:2129
#, no-c-format
msgid "Enter the constant's value here."
msgstr "在此輸入常數的值。"

#. i18n: file qeditconstant.ui line 109
#: rc.cpp:478 rc.cpp:2132
#, no-c-format
msgid ""
"The value of a constant can be an expression, for instance PI/2 or sqrt(2)."
msgstr "常數值可以是表示式，例如 PI/2 或 sqrt(2)。"

#. i18n: file qeditparametric.ui line 24
#: rc.cpp:481 rc.cpp:2135
#, no-c-format
msgid "Edit Parametric Plot"
msgstr "編輯參數方程式圖"

#. i18n: file qeditparametric.ui line 49
#: rc.cpp:487 rc.cpp:2141
#, no-c-format
msgid "Name:"
msgstr "名稱："

#. i18n: file qeditparametric.ui line 71
#: rc.cpp:490 rc.cpp:517 rc.cpp:2144 rc.cpp:2171
#, no-c-format
msgid "enter an expression"
msgstr "輸入表示式"

#. i18n: file qeditparametric.ui line 76
#: rc.cpp:493 rc.cpp:2147
#, no-c-format
msgid ""
"Enter an expression for the function.\n"
"The dummy variable is t.\n"
"Example: cos(t)"
msgstr ""
"輸入函數表示式。\n"
"中間變數為 t。\n"
"如：cos(t)"

#. i18n: file qeditparametric.ui line 84
#: rc.cpp:498 rc.cpp:511 rc.cpp:528 rc.cpp:2152 rc.cpp:2165 rc.cpp:2182
#, no-c-format
msgid "f"
msgstr "f"

#. i18n: file qeditparametric.ui line 87
#: rc.cpp:501 rc.cpp:2155
#, no-c-format
msgid "name of the function"
msgstr "函數名"

#. i18n: file qeditparametric.ui line 91
#: rc.cpp:504 rc.cpp:2158
#, no-c-format
msgid ""
"Enter the name of the function.\n"
"The name of a function must be unique. If you leave this line empty KmPlot will "
"set a default name. You can change it later."
msgstr ""
"輸入函數名稱。\n"
"函數名稱必須唯一。如果您將此行留空，KmPlot 將會設定一個預設名稱。您稍後可進行更改。"

#. i18n: file qeditparametric.ui line 110
#: rc.cpp:508 rc.cpp:2162
#, no-c-format
msgid "y"
msgstr "y"

#. i18n: file qeditparametric.ui line 131
#: rc.cpp:514 rc.cpp:531 rc.cpp:2168 rc.cpp:2185
#, no-c-format
msgid "(t) ="
msgstr "(t) ="

#. i18n: file qeditparametric.ui line 154
#: rc.cpp:520 rc.cpp:2174
#, no-c-format
msgid ""
"Enter an expression for the function.\n"
"The dummy variable is t.\n"
"Example: sin(t)"
msgstr ""
"輸入函數表示式。\n"
"中間變數為 t。\n"
"例如：sin(t)"

#. i18n: file qeditparametric.ui line 176
#: rc.cpp:525 rc.cpp:2179
#, no-c-format
msgid "x"
msgstr "x"

#. i18n: file qeditparametric.ui line 220
#: rc.cpp:537 rc.cpp:649 rc.cpp:2191 rc.cpp:2303
#, no-c-format
msgid "Hide"
msgstr "隱藏"

#. i18n: file qeditparametric.ui line 327
#: rc.cpp:570 rc.cpp:682 rc.cpp:2224 rc.cpp:2336
#, no-c-format
msgid "F1"
msgstr "F1"

#. i18n: file qeditparametric.ui line 364
#: rc.cpp:576 rc.cpp:688 rc.cpp:2230 rc.cpp:2342
#, no-c-format
msgid "apply changes to the list"
msgstr "將更改套用到列表"

#. i18n: file qeditparametric.ui line 367
#: rc.cpp:579 rc.cpp:691 rc.cpp:2233 rc.cpp:2345
#, no-c-format
msgid "Click this button to apply the changes to the list of functions."
msgstr "單擊此按鈕將更改套用到函數列表。"

#. i18n: file qeditparametric.ui line 381
#: rc.cpp:585 rc.cpp:697 rc.cpp:2239 rc.cpp:2351
#, no-c-format
msgid "abort without changing anything"
msgstr "中止而不更改"

#. i18n: file qeditparametric.ui line 384
#: rc.cpp:588 rc.cpp:700 rc.cpp:2242 rc.cpp:2354
#, no-c-format
msgid "Click here to close the dialog without changing anything."
msgstr "單擊此處關閉對話框而不更改。"

#. i18n: file qeditparametric.ui line 419
#: rc.cpp:594 rc.cpp:2248
#, no-c-format
msgid "&Max:"
msgstr "最大(&M)："

#. i18n: file qeditparametric.ui line 430
#: rc.cpp:597 rc.cpp:2251
#, no-c-format
msgid "Custom plot maximum t-range:"
msgstr "自訂繪圖的最大 t 範圍："

#. i18n: file qeditparametric.ui line 436
#: rc.cpp:603 rc.cpp:736 rc.cpp:2257 rc.cpp:2390
#, no-c-format
msgid "Check this button and enter the plot maximum range boundary below."
msgstr "勾選此項目並在下方輸入繪圖的最大範圍邊界。"

#. i18n: file qeditparametric.ui line 444
#: rc.cpp:606 rc.cpp:2260
#, no-c-format
msgid "Custom plot minimum t-range:"
msgstr "自訂繪圖的最小 t 範圍："

#. i18n: file qeditparametric.ui line 450
#: rc.cpp:612 rc.cpp:727 rc.cpp:2266 rc.cpp:2381
#, no-c-format
msgid "Check this button and enter the plot minimum range boundary below."
msgstr "勾選此項目並在下方輸入繪圖的最小範圍邊界。"

#. i18n: file qeditpolar.ui line 24
#: rc.cpp:627 rc.cpp:2281
#, no-c-format
msgid "Edit Polar Plot"
msgstr "編輯參數方程式圖"

#. i18n: file qeditpolar.ui line 57
#: rc.cpp:633 rc.cpp:2287
#, no-c-format
msgid "enter an equation, for instance loop(angle)=ln(angle)"
msgstr "輸入一個方程式，如 loop(angle)=ln(angle)"

#. i18n: file qeditpolar.ui line 61
#: rc.cpp:636 rc.cpp:2290
#, no-c-format
msgid ""
"Enter an expression for the function. The prefix \"r\" will be added "
"automatically.\n"
"Example: loop(angle)=ln(angle)"
msgstr ""
"輸入函數的表示式。程序會自動新增前置字串 r 。\n"
"如：loop(angle)=ln(angle)"

#. i18n: file qeditpolar.ui line 69
#: rc.cpp:640 rc.cpp:2294
#, no-c-format
msgid "r"
msgstr "r"

#. i18n: file qeditpolar.ui line 77
#: rc.cpp:643 rc.cpp:2297
#, no-c-format
msgid "Equation:"
msgstr "公式："

#. i18n: file qeditpolar.ui line 286
#: rc.cpp:703 rc.cpp:1000 rc.cpp:1060 rc.cpp:2357 rc.cpp:2654 rc.cpp:2714
#, no-c-format
msgid "Max:"
msgstr "最大："

#. i18n: file qeditpolar.ui line 297
#: rc.cpp:706 rc.cpp:1003 rc.cpp:1063 rc.cpp:2360 rc.cpp:2657 rc.cpp:2717
#, no-c-format
msgid "Min:"
msgstr "最小："

#. i18n: file qeditpolar.ui line 336
#: rc.cpp:721 rc.cpp:2375
#, no-c-format
msgid "Custom plot minimum r-range:"
msgstr "自訂繪圖的最小 r 範圍："

#. i18n: file qeditpolar.ui line 339
#: rc.cpp:724 rc.cpp:2378
#, no-c-format
msgid "Customize the plot range"
msgstr "自訂繪圖範圍"

#. i18n: file qeditpolar.ui line 350
#: rc.cpp:730 rc.cpp:2384
#, no-c-format
msgid "Custom plot maximum r-range:"
msgstr "自訂繪圖的最大 r 範圍："

#. i18n: file qminmax.ui line 92
#: rc.cpp:751 rc.cpp:2405
#, no-c-format
msgid "Graph"
msgstr "圖形"

#. i18n: file qminmax.ui line 103
#: rc.cpp:754 rc.cpp:2408
#, no-c-format
msgid "The available functions you can search in"
msgstr "您可搜尋的函數"

#. i18n: file qminmax.ui line 106
#: rc.cpp:757 rc.cpp:2411
#, no-c-format
msgid ""
"Here you can see all available functions you can use. Select one of them."
msgstr "您可在此看到您可以使用的全部函數。從中選擇一個。"

#. i18n: file qminmax.ui line 119
#: rc.cpp:763 rc.cpp:2417
#, no-c-format
msgid "close the dialog"
msgstr "關閉對話框"

#. i18n: file qminmax.ui line 122
#: rc.cpp:766 rc.cpp:2420
#, no-c-format
msgid "Close the dialog and return to the main window."
msgstr "關閉對話框並回到主視窗。"

#. i18n: file qminmax.ui line 130
#: rc.cpp:769 rc.cpp:2423
#, no-c-format
msgid "Choose Parameter Value..."
msgstr "選擇參數值..."

#. i18n: file qminmax.ui line 133
#: rc.cpp:772 rc.cpp:2426
#, no-c-format
msgid "select the parameter value you want to use"
msgstr "選擇您想要使用的參數值"

#. i18n: file qminmax.ui line 136
#: rc.cpp:775 rc.cpp:2429
#, no-c-format
msgid "If the function has any parameter values you must select it here."
msgstr "如果此函數有任何參數值，您必須在此選擇。"

#. i18n: file qparametereditor.ui line 16
#: rc.cpp:778 rc.cpp:2432
#, no-c-format
msgid "Parameter Editor"
msgstr "參數編輯器"

#. i18n: file qparametereditor.ui line 61
#: rc.cpp:790 rc.cpp:2444
#, no-c-format
msgid "list of parameter values"
msgstr "參數值列表"

#. i18n: file qparametereditor.ui line 64
#: rc.cpp:793 rc.cpp:2447
#, no-c-format
msgid "Here you see the list of all parameter values for the function."
msgstr "您可在此看到函數的全部參數值。"

#. i18n: file qparametereditor.ui line 89
#: rc.cpp:808 rc.cpp:2462
#, no-c-format
msgid "Close the dialog"
msgstr "關閉此對話框"

#. i18n: file qparametereditor.ui line 92
#: rc.cpp:811 rc.cpp:2465
#, no-c-format
msgid "Close the window and return to the function dialog."
msgstr "關閉視窗並回到函數對話框。"

#. i18n: file qparametereditor.ui line 137
#: rc.cpp:823 rc.cpp:2477
#, no-c-format
msgid "&Export..."
msgstr "匯出(&E)..."

#. i18n: file qparametereditor.ui line 140
#: rc.cpp:826 rc.cpp:2480
#, no-c-format
msgid "Export values to a textfile"
msgstr "將值匯出為文字檔案"

#. i18n: file qparametereditor.ui line 143
#: rc.cpp:829 rc.cpp:2483
#, no-c-format
msgid ""
"Export values to a textfile. Every value in the parameter list will be written "
"to one line in the file."
msgstr "將值匯出為文字檔案。參數列表中的每個值都會寫入為檔案中的一行。"

#. i18n: file qparametereditor.ui line 171
#: rc.cpp:832 rc.cpp:2486
#, no-c-format
msgid "&Import..."
msgstr "匯入(&I)..."

#. i18n: file qparametereditor.ui line 174
#: rc.cpp:835 rc.cpp:2489
#, no-c-format
msgid "Import values from a textfile"
msgstr "從文字檔案匯入值"

#. i18n: file qparametereditor.ui line 177
#: rc.cpp:838 rc.cpp:2492
#, no-c-format
msgid ""
"Import values from a textfile. Every line in the file is parsed as a value or "
"expression."
msgstr "從文字檔案匯入值。檔案的每一行都會被分析為值或表示式。"

#. i18n: file settingspagecolor.ui line 28
#: rc.cpp:841 rc.cpp:2495
#, no-c-format
msgid "&Coords"
msgstr "座標(&C)"

#. i18n: file settingspagecolor.ui line 47
#: rc.cpp:844 rc.cpp:2498
#, no-c-format
msgid "&Axes:"
msgstr "軸(&A)："

#. i18n: file settingspagecolor.ui line 61
#: rc.cpp:847 rc.cpp:2501
#, no-c-format
msgid "select color for the axes"
msgstr "選擇軸的顏色"

#. i18n: file settingspagecolor.ui line 64
#: rc.cpp:850 rc.cpp:2504
#, no-c-format
msgid ""
"Specify the color of the axes. The change will appear as soon as you press the "
"OK button."
msgstr "指定軸的顏色。當您單擊確定按鈕時，更改將會立即生效。"

#. i18n: file settingspagecolor.ui line 75
#: rc.cpp:853 rc.cpp:2507
#, no-c-format
msgid "select color for the grid"
msgstr "選擇格線的顏色"

#. i18n: file settingspagecolor.ui line 78
#: rc.cpp:856 rc.cpp:2510
#, no-c-format
msgid ""
"Specify the color of the grid. The change will appear as soon as you press the "
"OK button."
msgstr "指定格線的顏色。當您單擊確定按鈕時，更改將會立即生效。"

#. i18n: file settingspagecolor.ui line 86
#: rc.cpp:859 rc.cpp:2513
#, no-c-format
msgid "&Grid:"
msgstr "格線(&G)："

#. i18n: file settingspagecolor.ui line 118
#: rc.cpp:862 rc.cpp:2516
#, no-c-format
msgid "&Default Function Colors"
msgstr "預設函數顏色(&D)"

#. i18n: file settingspagecolor.ui line 148
#: rc.cpp:865 rc.cpp:2519
#, no-c-format
msgid "the default color for function number 2"
msgstr "第二個函數的預設顏色"

#. i18n: file settingspagecolor.ui line 151
#: rc.cpp:868 rc.cpp:2522
#, no-c-format
msgid ""
"The default color for function number 2. Please note that this color setting "
"only affects empty functions, so if you have defined a function at number 1 and "
"you change the color for that number here, the setting will be shown next time "
"you define a new function at number 1."
msgstr ""
"第二個函數的預設顏色。請注意，此顏色設定只影響空函數，所以如果您定義了第一個函數，而您稍後又在此更改了第一個函數的顏色，設定將會在您下次定義第一個函數時生效。"

#. i18n: file settingspagecolor.ui line 162
#: rc.cpp:871 rc.cpp:2525
#, no-c-format
msgid "the default color for function number 5"
msgstr "第五個函數的預設顏色"

#. i18n: file settingspagecolor.ui line 165
#: rc.cpp:874 rc.cpp:2528
#, no-c-format
msgid ""
"The default color for function number 5. Please note that this color setting "
"only affects empty functions, so if you have defined a function at number 1 and "
"you change the color for that number here, the setting will be shown next time "
"you define a new function at number 1."
msgstr ""
"第五個函數的預設顏色。請注意，此顏色設定只影響空函數，所以如果您定義了第一個函數，而您稍後又在此更改了第一個函數的顏色，設定將會在您下次定義第一個函數時生效。"

#. i18n: file settingspagecolor.ui line 176
#: rc.cpp:877 rc.cpp:2531
#, no-c-format
msgid "the default color for function number 1"
msgstr "第一個函數的預設顏色"

#. i18n: file settingspagecolor.ui line 179
#: rc.cpp:880 rc.cpp:2534
#, no-c-format
msgid ""
"The default color for function number 1. Please note that this color setting "
"only affects empty functions, so if you have defined a function at number 1 and "
"you change the color for that number here, the setting will be shown next time "
"you define a new function at number 1."
msgstr ""
"第一個函數的預設顏色。請注意，此顏色設定只影響空函數，所以如果您定義了第一個函數，而您稍後又在此更改了第一個函數的顏色，設定將會在您下次定義第一個函數時生效。"

#. i18n: file settingspagecolor.ui line 187
#: rc.cpp:883 rc.cpp:2537
#, no-c-format
msgid "Function &1:"
msgstr "函數 1(&1)："

#. i18n: file settingspagecolor.ui line 201
#: rc.cpp:886 rc.cpp:2540
#, no-c-format
msgid "the default color for function number 3"
msgstr "第三個函數的預設顏色"

#. i18n: file settingspagecolor.ui line 204
#: rc.cpp:889 rc.cpp:2543
#, no-c-format
msgid ""
"The default color for function number 3. Please note that this color setting "
"only affects empty functions, so if you have defined a function at number 1 and "
"you change the color for that number here, the setting will be shown next time "
"you define a new function at number 1."
msgstr ""
"第三個函數的預設顏色。請注意，此顏色設定只影響空函數，所以如果您定義了第一個函數，而您稍後又在此更改了第一個函數的顏色，設定將會在您下次定義第一個函數時生效。"

#. i18n: file settingspagecolor.ui line 212
#: rc.cpp:892 rc.cpp:2546
#, no-c-format
msgid "Function &3:"
msgstr "函數 3(&3)："

#. i18n: file settingspagecolor.ui line 223
#: rc.cpp:895 rc.cpp:2549
#, no-c-format
msgid "Function &2:"
msgstr "函數 2(&2)："

#. i18n: file settingspagecolor.ui line 234
#: rc.cpp:898 rc.cpp:2552
#, no-c-format
msgid "Function &4:"
msgstr "函數 4(&4)："

#. i18n: file settingspagecolor.ui line 248
#: rc.cpp:901 rc.cpp:2555
#, no-c-format
msgid "the default color for function number 4"
msgstr "第四個函數的預設顏色"

#. i18n: file settingspagecolor.ui line 251
#: rc.cpp:904 rc.cpp:2558
#, no-c-format
msgid ""
"The default color for function number 4. Please note that this color setting "
"only affects empty functions, so if you have defined a function at number 1 and "
"you change the color for that number here, the setting will be shown next time "
"you define a new function at number 1."
msgstr ""
"第四個函數的預設顏色。請注意，此顏色設定只影響空函數，所以如果您定義了第一個函數，而您稍後又在此更改了第一個函數的顏色，設定將會在您下次定義第一個函數時生效。"

#. i18n: file settingspagecolor.ui line 259
#: rc.cpp:907 rc.cpp:2561
#, no-c-format
msgid "Function &5:"
msgstr "函數 5(&5)："

#. i18n: file settingspagecolor.ui line 297
#: rc.cpp:910 rc.cpp:2564
#, no-c-format
msgid "Function &7:"
msgstr "函數 7(&7)："

#. i18n: file settingspagecolor.ui line 308
#: rc.cpp:913 rc.cpp:2567
#, no-c-format
msgid "Function &8:"
msgstr "函數 8(&8)："

#. i18n: file settingspagecolor.ui line 322
#: rc.cpp:916 rc.cpp:2570
#, no-c-format
msgid "the default color for function number 9"
msgstr "第九個函數的預設顏色"

#. i18n: file settingspagecolor.ui line 325
#: rc.cpp:919 rc.cpp:2573
#, no-c-format
msgid ""
"The default color for function number 9. Please note that this color setting "
"only affects empty functions, so if you have defined a function at number 1 and "
"you change the color for that number here, the setting will be shown next time "
"you define a new function at number 1."
msgstr ""
"第九個函數的預設顏色。請注意，此顏色設定只影響空函數，所以如果您定義了第一個函數，而您稍後又在此更改了第一個函數的顏色，設定將會在您下次定義第一個函數時生效。"

#. i18n: file settingspagecolor.ui line 333
#: rc.cpp:922 rc.cpp:2576
#, no-c-format
msgid "Function &6:"
msgstr "函數 6(&6)："

#. i18n: file settingspagecolor.ui line 347
#: rc.cpp:925 rc.cpp:2579
#, no-c-format
msgid "the default color for function number 7"
msgstr "第七個函數的預設顏色"

#. i18n: file settingspagecolor.ui line 350
#: rc.cpp:928 rc.cpp:2582
#, no-c-format
msgid ""
"The default color for function number 7. Please note that this color setting "
"only affects empty functions, so if you have defined a function at number 1 and "
"you change the color for that number here, the setting will be shown next time "
"you define a new function at number 1."
msgstr ""
"第七個函數的預設顏色。請注意，此顏色設定只影響空函數，所以如果您定義了第一個函數，而您稍後又在此更改了第一個函數的顏色，設定將會在您下次定義第一個函數時生效。"

#. i18n: file settingspagecolor.ui line 361
#: rc.cpp:931 rc.cpp:2585
#, no-c-format
msgid "the default color for function number 8"
msgstr "第八個函數的預設顏色"

#. i18n: file settingspagecolor.ui line 364
#: rc.cpp:934 rc.cpp:2588
#, no-c-format
msgid ""
"The default color for function number 8. Please note that this color setting "
"only affects empty functions, so if you have defined a function at number 1 and "
"you change the color for that number here, the setting will be shown next time "
"you define a new function at number 1."
msgstr ""
"第八個函數的預設顏色。請注意，此顏色設定只影響空函數，所以如果您定義了第一個函數，而您稍後又在此更改了第一個函數的顏色，設定將會在您下次定義第一個函數時生效。"

#. i18n: file settingspagecolor.ui line 375
#: rc.cpp:937 rc.cpp:2591
#, no-c-format
msgid "the default color for function number 6"
msgstr "第六個函數的預設顏色"

#. i18n: file settingspagecolor.ui line 378
#: rc.cpp:940 rc.cpp:2594
#, no-c-format
msgid ""
"The default color for function number 6. Please note that this color setting "
"only affects empty functions, so if you have defined a function at number 1 and "
"you change the color for that number here, the setting will be shown next time "
"you define a new function at number 1."
msgstr ""
"第六個函數的預設顏色。請注意，此顏色設定只影響空函數，所以如果您定義了第一個函數，而您稍後又在此更改了第一個函數的顏色，設定將會在您下次定義第一個函數時生效。"

#. i18n: file settingspagecolor.ui line 386
#: rc.cpp:943 rc.cpp:2597
#, no-c-format
msgid "Function &9:"
msgstr "函數 9(&9)："

#. i18n: file settingspagecolor.ui line 400
#: rc.cpp:946 rc.cpp:2600
#, no-c-format
msgid "the default color for function number 10"
msgstr "第十個函數的預設顏色"

#. i18n: file settingspagecolor.ui line 403
#: rc.cpp:949 rc.cpp:2603
#, no-c-format
msgid ""
"The default color for function number 10. Please note that this color setting "
"only affects empty functions, so if you have defined a function at number 1 and "
"you change the color for that number here, the setting will be shown next time "
"you define a new function at number 1."
msgstr ""
"第十個函數的預設顏色。請注意，此顏色設定只影響空函數，所以如果您定義了第一個函數，而您稍後又在此更改了第一個函數的顏色，設定將會在您下次定義第一個函數時生效。"

#. i18n: file settingspagecolor.ui line 411
#: rc.cpp:952 rc.cpp:2606
#, no-c-format
msgid "Function 1&0:"
msgstr "函數 10(&0)："

#. i18n: file settingspagecoords.ui line 28
#: rc.cpp:955 rc.cpp:2609
#, no-c-format
msgid "&Axes"
msgstr "軸(&A)"

#. i18n: file settingspagecoords.ui line 47
#: rc.cpp:958 rc.cpp:2612
#, no-c-format
msgid "&X Axis"
msgstr "X 軸(&X)"

#. i18n: file settingspagecoords.ui line 58
#: rc.cpp:961 rc.cpp:1021 rc.cpp:2615 rc.cpp:2675
#, no-c-format
msgid "[-8 | +8]"
msgstr "[-8 | +8]"

#. i18n: file settingspagecoords.ui line 64
#: rc.cpp:964 rc.cpp:973 rc.cpp:982 rc.cpp:991 rc.cpp:1024 rc.cpp:1033
#: rc.cpp:1042 rc.cpp:1051 rc.cpp:2618 rc.cpp:2627 rc.cpp:2636 rc.cpp:2645
#: rc.cpp:2678 rc.cpp:2687 rc.cpp:2696 rc.cpp:2705
#, no-c-format
msgid "Predefined plot ranges"
msgstr "預先定義繪圖範圍"

#. i18n: file settingspagecoords.ui line 67
#: rc.cpp:967 rc.cpp:976 rc.cpp:985 rc.cpp:994 rc.cpp:1027 rc.cpp:1036
#: rc.cpp:1045 rc.cpp:1054 rc.cpp:2621 rc.cpp:2630 rc.cpp:2639 rc.cpp:2648
#: rc.cpp:2681 rc.cpp:2690 rc.cpp:2699 rc.cpp:2708
#, no-c-format
msgid "Select one of the predefined plot ranges."
msgstr "選擇預先定義的繪圖範圍。"

#. i18n: file settingspagecoords.ui line 75
#: rc.cpp:970 rc.cpp:1030 rc.cpp:2624 rc.cpp:2684
#, no-c-format
msgid "[-5 | +5]"
msgstr "[-5 | +5]"

#. i18n: file settingspagecoords.ui line 92
#: rc.cpp:979 rc.cpp:1039 rc.cpp:2633 rc.cpp:2693
#, no-c-format
msgid "[0 | +16]"
msgstr "[0 | +16]"

#. i18n: file settingspagecoords.ui line 109
#: rc.cpp:988 rc.cpp:1048 rc.cpp:2642 rc.cpp:2702
#, no-c-format
msgid "[0 | +10]"
msgstr "[0 | +10]"

#. i18n: file settingspagecoords.ui line 126
#: rc.cpp:997 rc.cpp:1057 rc.cpp:2651 rc.cpp:2711
#, no-c-format
msgid "Custom:"
msgstr "自訂："

#. i18n: file settingspagecoords.ui line 164
#: rc.cpp:1006 rc.cpp:1012 rc.cpp:1066 rc.cpp:1072 rc.cpp:2660 rc.cpp:2666
#: rc.cpp:2720 rc.cpp:2726
#, no-c-format
msgid "Custom boundary of the plot range"
msgstr "自訂繪圖範圍邊界"

#. i18n: file settingspagecoords.ui line 167
#: rc.cpp:1009 rc.cpp:1015 rc.cpp:1069 rc.cpp:1075 rc.cpp:2663 rc.cpp:2669
#: rc.cpp:2723 rc.cpp:2729
#, no-c-format
msgid "Enter a valid expression, for instance 2*pi or e/2."
msgstr "輸入有效的表示式，例如 2*pi 或 e/2。"

#. i18n: file settingspagecoords.ui line 193
#: rc.cpp:1018 rc.cpp:2672
#, no-c-format
msgid "&Y Axis"
msgstr "Y 軸(&Y)"

#. i18n: file settingspagecoords.ui line 349
#: rc.cpp:1078 rc.cpp:2732
#, no-c-format
msgid "Axis-line width:"
msgstr "軸線寬度："

#. i18n: file settingspagecoords.ui line 363
#: rc.cpp:1081 rc.cpp:1090 rc.cpp:2735 rc.cpp:2744
#, no-c-format
msgid "Line width"
msgstr "線寬"

#. i18n: file settingspagecoords.ui line 371
#: rc.cpp:1084 rc.cpp:1093 rc.cpp:1105 rc.cpp:1186 rc.cpp:2738 rc.cpp:2747
#: rc.cpp:2759 rc.cpp:2840
#, no-c-format
msgid "0.1 mm"
msgstr "0.1 mm"

#. i18n: file settingspagecoords.ui line 389
#: rc.cpp:1087 rc.cpp:2741
#, no-c-format
msgid "Tic width:"
msgstr "刻度線寬度："

#. i18n: file settingspagecoords.ui line 429
#: rc.cpp:1096 rc.cpp:2750
#, no-c-format
msgid "Tic length:"
msgstr "刻度線長度："

#. i18n: file settingspagecoords.ui line 443
#: rc.cpp:1099 rc.cpp:2753
#, no-c-format
msgid "Length of the tic line"
msgstr "刻度線長度"

#. i18n: file settingspagecoords.ui line 446
#: rc.cpp:1102 rc.cpp:2756
#, no-c-format
msgid "Enter the length of a tic line."
msgstr "輸入刻度線長度。"

#. i18n: file settingspagecoords.ui line 472
#: rc.cpp:1108 rc.cpp:2762
#, no-c-format
msgid "Show arrows"
msgstr "顯示箭頭"

#. i18n: file settingspagecoords.ui line 478
#: rc.cpp:1111 rc.cpp:2765
#, no-c-format
msgid "visible arrows at the end of the axes"
msgstr "在軸線尾部顯示箭頭"

#. i18n: file settingspagecoords.ui line 481
#: rc.cpp:1114 rc.cpp:2768
#, no-c-format
msgid "Check this if the axes should have arrows at their ends."
msgstr "勾選此項目代表在軸線尾部顯示箭頭。"

#. i18n: file settingspagecoords.ui line 489
#: rc.cpp:1117 rc.cpp:2771
#, no-c-format
msgid "Show labels"
msgstr "顯示標籤"

#. i18n: file settingspagecoords.ui line 495
#: rc.cpp:1120 rc.cpp:2774
#, no-c-format
msgid "visible tic labels"
msgstr "可見的刻度線標籤"

#. i18n: file settingspagecoords.ui line 498
#: rc.cpp:1123 rc.cpp:2777
#, no-c-format
msgid "Check this if the axes' tics should be labeled."
msgstr "勾選此項目代表要為軸線刻度顯示標籤。"

#. i18n: file settingspagecoords.ui line 506
#: rc.cpp:1126 rc.cpp:2780
#, no-c-format
msgid "Show extra frame"
msgstr "顯示額外的框架"

#. i18n: file settingspagecoords.ui line 512
#: rc.cpp:1129 rc.cpp:2783
#, no-c-format
msgid "visible extra frame"
msgstr "可見的額外框架"

#. i18n: file settingspagecoords.ui line 515
#: rc.cpp:1132 rc.cpp:2786
#, no-c-format
msgid "Check this if the plot area should be framed by an extra line."
msgstr "勾選此項目代表要在繪圖區外側繪製一條額外的線。"

#. i18n: file settingspagecoords.ui line 523
#: rc.cpp:1135 rc.cpp:2789
#, no-c-format
msgid "Show axes"
msgstr "顯示軸"

#. i18n: file settingspagecoords.ui line 529
#: rc.cpp:1138 rc.cpp:2792
#, no-c-format
msgid "visible axes"
msgstr "可見軸"

#. i18n: file settingspagecoords.ui line 532
#: rc.cpp:1141 rc.cpp:2795
#, no-c-format
msgid "Check this if the axes should be visible."
msgstr "勾選此項目代表軸可見。"

#. i18n: file settingspagecoords.ui line 561
#: rc.cpp:1144 rc.cpp:2798
#, no-c-format
msgid "&Grid"
msgstr "格線(&G)"

#. i18n: file settingspagecoords.ui line 572
#: rc.cpp:1147 rc.cpp:2801
#, no-c-format
msgid "Grid &Style"
msgstr "格線樣式(&S)"

#. i18n: file settingspagecoords.ui line 575
#: rc.cpp:1150 rc.cpp:2804
#, no-c-format
msgid "Available grid styles"
msgstr "可用的格線樣式"

#. i18n: file settingspagecoords.ui line 586
#: rc.cpp:1153 rc.cpp:2807
#, no-c-format
msgid "None"
msgstr "無"

#. i18n: file settingspagecoords.ui line 589
#: rc.cpp:1156 rc.cpp:2810
#, no-c-format
msgid "No Grid will be plotted."
msgstr "不繪製格線。"

#. i18n: file settingspagecoords.ui line 597
#: rc.cpp:1159 rc.cpp:2813
#, no-c-format
msgid "Lines"
msgstr "直線"

#. i18n: file settingspagecoords.ui line 600
#: rc.cpp:1162 rc.cpp:2816
#, no-c-format
msgid "A line for every tic."
msgstr "每個刻度繪製直線。"

#. i18n: file settingspagecoords.ui line 608
#: rc.cpp:1165 rc.cpp:2819
#, no-c-format
msgid "Crosses"
msgstr "格點"

#. i18n: file settingspagecoords.ui line 611
#: rc.cpp:1168 rc.cpp:2822
#, no-c-format
msgid "Only little crosses in the plot area."
msgstr "僅在繪圖區繪製小交叉點。"

#. i18n: file settingspagecoords.ui line 619
#: rc.cpp:1171 rc.cpp:2825
#, no-c-format
msgid "Polar"
msgstr "極座標"

#. i18n: file settingspagecoords.ui line 622
#: rc.cpp:1174 rc.cpp:2828
#, no-c-format
msgid "Circles around the Origin."
msgstr "原點週圍的圓。"

#. i18n: file settingspagecoords.ui line 654
#: rc.cpp:1180 rc.cpp:2834
#, no-c-format
msgid "Width for the grid lines"
msgstr "格線線的寬度"

#. i18n: file settingspagecoords.ui line 657
#: rc.cpp:1183 rc.cpp:1483 rc.cpp:2837
#, no-c-format
msgid "Enter the width of the grid lines."
msgstr "輸入格線線的寬度。"

#. i18n: file settingspagefonts.ui line 41
#: rc.cpp:1189 rc.cpp:2843
#, no-c-format
msgid "&Header table:"
msgstr "標頭表格(&H)："

#. i18n: file settingspagefonts.ui line 60
#: rc.cpp:1192 rc.cpp:2846
#, no-c-format
msgid "Axis &font:"
msgstr "軸字型(&F)："

#. i18n: file settingspagefonts.ui line 79
#: rc.cpp:1195 rc.cpp:2849
#, no-c-format
msgid "Axis font &size:"
msgstr "軸字型大小(&S)："

#. i18n: file settingspagefonts.ui line 90
#: rc.cpp:1198 rc.cpp:2852
#, no-c-format
msgid "the font for the axis"
msgstr "軸字型"

#. i18n: file settingspagefonts.ui line 93
#: rc.cpp:1201 rc.cpp:2855
#, no-c-format
msgid ""
"Select the font you want to use for the axis labels. If you cannot see the "
"labels, check that you have enabled \"Show labels\" in the coordinate setting "
"dialog."
msgstr "選擇您想要為軸標籤使用的字型。如果您看不到標籤，請確定您在座標設定對話框中啟用了“顯示標籤”。"

#. i18n: file settingspagefonts.ui line 101
#: rc.cpp:1204 rc.cpp:2858
#, no-c-format
msgid "The font size for the axis"
msgstr "軸字型大小"

#. i18n: file settingspagefonts.ui line 104
#: rc.cpp:1207 rc.cpp:2861
#, no-c-format
msgid "Here you set the font size for the axis"
msgstr "您可在此設定軸字型大小"

#. i18n: file settingspagefonts.ui line 112
#: rc.cpp:1210 rc.cpp:2864
#, no-c-format
msgid "the font for the header table"
msgstr "標頭表格字型"

#. i18n: file settingspagefonts.ui line 115
#: rc.cpp:1213 rc.cpp:2867
#, no-c-format
msgid ""
"Select the font you want to use in the header table. The header table can be "
"included when you are printing a graph."
msgstr "選擇您想要在標頭表格中使用的字型。標頭表格可在您列印圖像時選用。"

#. i18n: file settingspageprecision.ui line 52
#: rc.cpp:1219 rc.cpp:2873
#, no-c-format
msgid "Zoom in by:"
msgstr "放大比例："

#. i18n: file settingspageprecision.ui line 63
#: rc.cpp:1222 rc.cpp:2876
#, no-c-format
msgid "Zoom out by:"
msgstr "縮小比例："

#. i18n: file settingspageprecision.ui line 86
#: rc.cpp:1225 rc.cpp:1231 rc.cpp:2879 rc.cpp:2885
#, no-c-format
msgid "%"
msgstr "%"

#. i18n: file settingspageprecision.ui line 89
#: rc.cpp:1228 rc.cpp:2882
#, no-c-format
msgid "The value the zoom-in tool should use."
msgstr "放大工具應使用的值。"

#. i18n: file settingspageprecision.ui line 112
#: rc.cpp:1234 rc.cpp:2888
#, no-c-format
msgid "The value the zoom-out tool should use."
msgstr "縮小工具應使用的值。"

#. i18n: file settingspageprecision.ui line 122
#: rc.cpp:1237 rc.cpp:2891
#, no-c-format
msgid "Background Color"
msgstr "背景顏色"

#. i18n: file settingspageprecision.ui line 136
#: rc.cpp:1240 rc.cpp:2894
#, no-c-format
msgid "Color for the plot area behind the grid."
msgstr "格線後繪圖區域的顏色。"

#. i18n: file settingspageprecision.ui line 139
#: rc.cpp:1243 rc.cpp:2897
#, no-c-format
msgid ""
"Click on the button the choose the color of the background. This option has no "
"effect on printing nor export."
msgstr "單擊此按鈕可選擇背景顏色。此選項與列印或匯出無關。"

#. i18n: file settingspageprecision.ui line 166
#: rc.cpp:1246 rc.cpp:2900
#, no-c-format
msgid "Angle Mode"
msgstr "角度模式"

#. i18n: file settingspageprecision.ui line 177
#: rc.cpp:1249 rc.cpp:2903
#, no-c-format
msgid "&Radian"
msgstr "弧度(&R)"

#. i18n: file settingspageprecision.ui line 180
#: rc.cpp:1252 rc.cpp:2906
#, no-c-format
msgid "Trigonometric functions use radian mode for angles."
msgstr "三角函數的角度使用弧度模式。"

#. i18n: file settingspageprecision.ui line 183
#: rc.cpp:1255 rc.cpp:2909
#, no-c-format
msgid ""
"Check this button to use radian mode to measure angles. This is important for "
"trigonometric functions only."
msgstr "選中此按鈕可使用弧度模式度量角度。這只對三角函數非常重要。"

#. i18n: file settingspageprecision.ui line 191
#: rc.cpp:1258 rc.cpp:2912
#, no-c-format
msgid "&Degree"
msgstr "度數(&D)"

#. i18n: file settingspageprecision.ui line 194
#: rc.cpp:1261 rc.cpp:2915
#, no-c-format
msgid "Trigonometric functions use degree mode for angles."
msgstr "三角函數的角度使用度數模式。"

#. i18n: file settingspageprecision.ui line 197
#: rc.cpp:1264 rc.cpp:2918
#, no-c-format
msgid ""
"Check this button to use degree mode to measure angles. This is important for "
"trigonometric functions only."
msgstr "選中此按鈕可使用度數模式度量角度。這只對三角函數非常重要。"

#. i18n: file settingspageprecision.ui line 207
#: rc.cpp:1267 rc.cpp:2921
#, no-c-format
msgid "Precision"
msgstr "精確度"

#. i18n: file settingspageprecision.ui line 226
#: rc.cpp:1270 rc.cpp:2924
#, no-c-format
msgid "Points per pixel:"
msgstr "每像素點數："

#. i18n: file settingspageprecision.ui line 243
#: rc.cpp:1273 rc.cpp:2927
#, no-c-format
msgid "How many points per pixel shall be calculated."
msgstr "每個像素應該計算多少個點。"

#. i18n: file settingspageprecision.ui line 246
#: rc.cpp:1276 rc.cpp:2930
#, no-c-format
msgid ""
"Enter the amount of points per pixel which shall be calculated. For slow "
"computers or very complex plots use higher values."
msgstr "輸入要在每個像素計算多少個點。對於較慢的計算機，或者較複雜的圖形，請使用較高的值。"

#. i18n: file settingspageprecision.ui line 256
#: rc.cpp:1279 rc.cpp:2933
#, no-c-format
msgid "&Use relative step width"
msgstr "使用相對步進寬度(&U)"

#. i18n: file settingspageprecision.ui line 259
#: rc.cpp:1282 rc.cpp:2936
#, no-c-format
msgid "Use the same precision independent of the window's size"
msgstr "使用獨立於視窗大小的相同精確度"

#. i18n: file settingspageprecision.ui line 262
#: rc.cpp:1285 rc.cpp:1681 rc.cpp:2939
#, no-c-format
msgid ""
"If relative step width is set to true, the step width will be adapted to the "
"size of the window."
msgstr "如果相對步進寬度設定為 true 的話，步進寬度將會根據視窗的大小變化。"

#. i18n: file settingspagescaling.ui line 32
#: rc.cpp:1288 rc.cpp:2942
#, no-c-format
msgid "X-Axis"
msgstr "X 軸"

#. i18n: file settingspagescaling.ui line 43
#: rc.cpp:1291 rc.cpp:1372 rc.cpp:2945 rc.cpp:3026
#, no-c-format
msgid "Scaling:"
msgstr "比例："

#. i18n: file settingspagescaling.ui line 65
#: rc.cpp:1294 rc.cpp:1375 rc.cpp:2948 rc.cpp:3029
#, no-c-format
msgid "Printing:"
msgstr "列印："

#. i18n: file settingspagescaling.ui line 73
#: rc.cpp:1297 rc.cpp:1300 rc.cpp:1378 rc.cpp:1381 rc.cpp:2951 rc.cpp:2954
#: rc.cpp:3032 rc.cpp:3035
#, no-c-format
msgid "1 tic ="
msgstr "1 格 ="

#. i18n: file settingspagescaling.ui line 93
#: rc.cpp:1303 rc.cpp:1336 rc.cpp:1384 rc.cpp:1417 rc.cpp:2957 rc.cpp:2990
#: rc.cpp:3038 rc.cpp:3071
#, no-c-format
msgid "10"
msgstr "10"

#. i18n: file settingspagescaling.ui line 98
#: rc.cpp:1306 rc.cpp:1339 rc.cpp:1387 rc.cpp:1420 rc.cpp:2960 rc.cpp:2993
#: rc.cpp:3041 rc.cpp:3074
#, no-c-format
msgid "5"
msgstr "5"

#. i18n: file settingspagescaling.ui line 103
#: rc.cpp:1309 rc.cpp:1342 rc.cpp:1390 rc.cpp:1423 rc.cpp:2963 rc.cpp:2996
#: rc.cpp:3044 rc.cpp:3077
#, no-c-format
msgid "2"
msgstr "2"

#. i18n: file settingspagescaling.ui line 108
#: rc.cpp:1312 rc.cpp:1345 rc.cpp:1393 rc.cpp:1426 rc.cpp:2966 rc.cpp:2999
#: rc.cpp:3047 rc.cpp:3080
#, no-c-format
msgid "1"
msgstr "1"

#. i18n: file settingspagescaling.ui line 113
#: rc.cpp:1315 rc.cpp:1348 rc.cpp:1396 rc.cpp:1429 rc.cpp:2969 rc.cpp:3002
#: rc.cpp:3050 rc.cpp:3083
#, no-c-format
msgid "0.5"
msgstr "0.5"

#. i18n: file settingspagescaling.ui line 118
#: rc.cpp:1318 rc.cpp:1351 rc.cpp:1399 rc.cpp:1432 rc.cpp:2972 rc.cpp:3005
#: rc.cpp:3053 rc.cpp:3086
#, no-c-format
msgid "pi/2"
msgstr "pi/2"

#. i18n: file settingspagescaling.ui line 123
#: rc.cpp:1321 rc.cpp:1354 rc.cpp:1402 rc.cpp:1435 rc.cpp:2975 rc.cpp:3008
#: rc.cpp:3056 rc.cpp:3089
#, no-c-format
msgid "pi/3"
msgstr "pi/3"

#. i18n: file settingspagescaling.ui line 128
#: rc.cpp:1324 rc.cpp:1357 rc.cpp:1405 rc.cpp:1438 rc.cpp:2978 rc.cpp:3011
#: rc.cpp:3059 rc.cpp:3092
#, no-c-format
msgid "pi/4"
msgstr "pi/4"

#. i18n: file settingspagescaling.ui line 135
#: rc.cpp:1327 rc.cpp:2981
#, no-c-format
msgid "set the x-axis' printing scaling"
msgstr "設定 x 軸的列印縮放比例"

#. i18n: file settingspagescaling.ui line 138
#: rc.cpp:1330 rc.cpp:2984
#, no-c-format
msgid ""
"This is similar to the setting above, but this sets the distance between two "
"x-axis-grids when printing or drawing on the screen."
msgstr "與上面的設定類型類似，但此處設定列印或在螢幕上繪製時 x 軸上格線間的距離。"

#. i18n: file settingspagescaling.ui line 146
#: rc.cpp:1333 rc.cpp:1414 rc.cpp:2987 rc.cpp:3068
#, no-c-format
msgid "cm"
msgstr "cm"

#. i18n: file settingspagescaling.ui line 199
#: rc.cpp:1363 rc.cpp:3017
#, no-c-format
msgid "set the x-axis' scaling"
msgstr "設定 x 軸的縮放比例"

#. i18n: file settingspagescaling.ui line 202
#: rc.cpp:1366 rc.cpp:3020
#, no-c-format
msgid ""
"Choose how many units apart the x-axis tics will be, and therefore, how far "
"apart grid lines will be drawn."
msgstr "選擇 x 軸刻度的間隔，即每隔多遠繪製一條格線。"

#. i18n: file settingspagescaling.ui line 212
#: rc.cpp:1369 rc.cpp:3023
#, no-c-format
msgid "Y-Axis"
msgstr "Y 軸"

#. i18n: file settingspagescaling.ui line 315
#: rc.cpp:1408 rc.cpp:1444 rc.cpp:3062 rc.cpp:3098
#, no-c-format
msgid "set the y-axis' scaling"
msgstr "設定 y 軸的縮放比例"

#. i18n: file settingspagescaling.ui line 318
#: rc.cpp:1411 rc.cpp:3065
#, no-c-format
msgid ""
"This is similar to the setting above, but this sets the distance between two "
"y-axis-grids when printing or drawing on the screen."
msgstr "與上面的設定類型類似，但此處設定列印或在螢幕上繪製時 y 軸上格線間的距離。"

#. i18n: file settingspagescaling.ui line 382
#: rc.cpp:1447 rc.cpp:3101
#, no-c-format
msgid ""
"Choose how many units apart the y-axis tics will be, and therefore, how far "
"apart grid lines will be drawn."
msgstr "選擇 y 軸刻度的間隔，即每隔多遠繪製一條格線。"

#. i18n: file sliderwindow.ui line 16
#: rc.cpp:1450 rc.cpp:3104
#, no-c-format
msgid "Slider"
msgstr "滑動器"

#. i18n: file sliderwindow.ui line 70
#: rc.cpp:1453 rc.cpp:3107
#, no-c-format
msgid "0"
msgstr "0"

#. i18n: file kmplot.kcfg line 11
#: rc.cpp:1456
#, no-c-format
msgid "Axis-line width"
msgstr "軸線寬度"

#. i18n: file kmplot.kcfg line 12
#: rc.cpp:1459
#, no-c-format
msgid "Enter the width of the axis lines."
msgstr "輸入軸線的寬度。"

#. i18n: file kmplot.kcfg line 16
#: rc.cpp:1462
#, no-c-format
msgid "Checked if labels are visible"
msgstr "標籤是否可見"

#. i18n: file kmplot.kcfg line 17
#: rc.cpp:1465
#, no-c-format
msgid "Check this box if the labels at the tics should be shown."
msgstr "是否在刻度中顯示標籤。"

#. i18n: file kmplot.kcfg line 21
#: rc.cpp:1468
#, no-c-format
msgid "Checked if axes are visible"
msgstr "軸是否可見"

#. i18n: file kmplot.kcfg line 22
#: rc.cpp:1471
#, no-c-format
msgid "Check this box if axes should be shown."
msgstr "是否顯示軸。"

#. i18n: file kmplot.kcfg line 26
#: rc.cpp:1474
#, no-c-format
msgid "Checked if arrows are visible"
msgstr "是否顯示箭頭"

#. i18n: file kmplot.kcfg line 27
#: rc.cpp:1477
#, no-c-format
msgid "Check this box if axes should have arrows."
msgstr "軸是否顯示箭頭。"

#. i18n: file kmplot.kcfg line 31
#: rc.cpp:1480
#, no-c-format
msgid "Grid Line Width"
msgstr "格線線寬"

#. i18n: file kmplot.kcfg line 36
#: rc.cpp:1486
#, no-c-format
msgid "Grid Style"
msgstr "格線樣式"

#. i18n: file kmplot.kcfg line 37
#: rc.cpp:1489
#, no-c-format
msgid "Choose a suitable grid style."
msgstr "選擇適合的格線樣式。"

#. i18n: file kmplot.kcfg line 41
#: rc.cpp:1492
#, no-c-format
msgid "Checked if a frame is visible"
msgstr "框架是否可見"

#. i18n: file kmplot.kcfg line 42
#: rc.cpp:1495
#, no-c-format
msgid "Check this box if a frame should be drawn around the plot area."
msgstr "是否要在繪圖區外側繪製框架。"

#. i18n: file kmplot.kcfg line 46
#: rc.cpp:1498
#, no-c-format
msgid "Checked if an extra frame is visible"
msgstr "額外框架是否可見"

#. i18n: file kmplot.kcfg line 47
#: rc.cpp:1501
#, no-c-format
msgid "Check this box if an extra frame should be drawn around the plot area."
msgstr "是否要在繪圖區外側繪製額外框架。"

#. i18n: file kmplot.kcfg line 51
#: rc.cpp:1504
#, no-c-format
msgid "Tic length"
msgstr "刻度線長度"

#. i18n: file kmplot.kcfg line 52
#: rc.cpp:1507
#, no-c-format
msgid "Enter the length of the tic lines"
msgstr "輸入刻度線長度"

#. i18n: file kmplot.kcfg line 56
#: rc.cpp:1510
#, no-c-format
msgid "Tic width"
msgstr "刻度線寬度"

#. i18n: file kmplot.kcfg line 57
#: rc.cpp:1513
#, no-c-format
msgid "Enter the width of the tic lines."
msgstr "輸入刻度線寬度。"

#. i18n: file kmplot.kcfg line 61
#: rc.cpp:1516
#, no-c-format
msgid "Plot-line width"
msgstr "繪圖線寬"

#. i18n: file kmplot.kcfg line 62
#: rc.cpp:1519
#, no-c-format
msgid "Enter the width of the plot line."
msgstr "輸入繪圖線寬。"

#. i18n: file kmplot.kcfg line 66
#: rc.cpp:1522
#, no-c-format
msgid "Predefined x-axis range"
msgstr "預先定義的 x 軸範圍"

#. i18n: file kmplot.kcfg line 67
#: rc.cpp:1525
#, no-c-format
msgid "Predefined plot area widths."
msgstr "預先定義的繪圖區寬度。"

#. i18n: file kmplot.kcfg line 71
#: rc.cpp:1528
#, no-c-format
msgid "Predefined y-axis range"
msgstr "預先定義的 y 軸範圍"

#. i18n: file kmplot.kcfg line 72
#: rc.cpp:1531
#, no-c-format
msgid "Predefined plot area heights."
msgstr "預先定義的繪圖區高度。"

#. i18n: file kmplot.kcfg line 76
#: rc.cpp:1534
#, no-c-format
msgid "Left boundary"
msgstr "左邊界"

#. i18n: file kmplot.kcfg line 77
#: rc.cpp:1537
#, no-c-format
msgid "Enter the left boundary of the plotting area."
msgstr "輸入繪圖區域的左邊界。"

#. i18n: file kmplot.kcfg line 81
#: rc.cpp:1540
#, no-c-format
msgid "Right boundary"
msgstr "右邊界"

#. i18n: file kmplot.kcfg line 82
#: rc.cpp:1543
#, no-c-format
msgid "Enter the right boundary of the plotting area."
msgstr "輸入繪圖區域的右邊界。"

#. i18n: file kmplot.kcfg line 86
#: rc.cpp:1546
#, no-c-format
msgid "Lower boundary"
msgstr "下邊界"

#. i18n: file kmplot.kcfg line 87
#: rc.cpp:1549
#, no-c-format
msgid "Enter the lower boundary of the plotting area."
msgstr "輸入繪圖區域的下邊界。"

#. i18n: file kmplot.kcfg line 91
#: rc.cpp:1552
#, no-c-format
msgid "Upper boundary"
msgstr "上邊界"

#. i18n: file kmplot.kcfg line 92
#: rc.cpp:1555
#, no-c-format
msgid "Enter the upper boundary of the plotting area."
msgstr "輸入繪圖區域的上邊界。"

#. i18n: file kmplot.kcfg line 99
#: rc.cpp:1558
#, no-c-format
msgid "Width of a unit from tic to tic"
msgstr "刻度之間的寬度單位"

#. i18n: file kmplot.kcfg line 100
#: rc.cpp:1561
#, no-c-format
msgid "Enter the width of a unit from tic to tic."
msgstr "輸入刻度之間的寬度單位。"

#. i18n: file kmplot.kcfg line 104
#: rc.cpp:1564
#, no-c-format
msgid "Height of a unit from tic to tic"
msgstr "刻度之間的高度單位"

#. i18n: file kmplot.kcfg line 105
#: rc.cpp:1567
#, no-c-format
msgid "Enter the height of a unit from tic to tic."
msgstr "刻度之間的高度單位。"

#. i18n: file kmplot.kcfg line 109
#: rc.cpp:1570
#, no-c-format
msgid "Printed width of 1 unit"
msgstr "一個單位的列印寬度"

#. i18n: file kmplot.kcfg line 110
#: rc.cpp:1573
#, no-c-format
msgid "Enter the width of a unit in cm."
msgstr "一個單位的列印寬度，以公分為單位。"

#. i18n: file kmplot.kcfg line 114
#: rc.cpp:1576
#, no-c-format
msgid "Printed height of 1 unit"
msgstr "一個單位的列印高度"

#. i18n: file kmplot.kcfg line 115
#: rc.cpp:1579
#, no-c-format
msgid "Enter the height of a unit in cm."
msgstr "一個單位的列印高度，以公分為單位。"

#. i18n: file kmplot.kcfg line 122
#: rc.cpp:1582
#, no-c-format
msgid "Font name of the axis labels"
msgstr "軸標籤的字型名稱"

#. i18n: file kmplot.kcfg line 123
#: rc.cpp:1585
#, no-c-format
msgid "Choose a font name for the axis labels."
msgstr "為軸標籤選擇字型名稱。"

#. i18n: file kmplot.kcfg line 127
#: rc.cpp:1588
#, no-c-format
msgid "Font size of the axis labels"
msgstr "軸標籤的字型大小"

#. i18n: file kmplot.kcfg line 128
#: rc.cpp:1591
#, no-c-format
msgid "Choose a font size for the axis labels."
msgstr "為軸標籤選擇字型大小。"

#. i18n: file kmplot.kcfg line 132
#: rc.cpp:1594
#, no-c-format
msgid "Font name of the printed header table"
msgstr "列印標頭表格的字型名稱"

#. i18n: file kmplot.kcfg line 133
#: rc.cpp:1597
#, no-c-format
msgid "Choose a font name for the table printed at the top of the page."
msgstr "為頁面上方列印的表格選擇字型名稱。"

#. i18n: file kmplot.kcfg line 140
#: rc.cpp:1600
#, no-c-format
msgid "Axis-line color"
msgstr "軸線顏色"

#. i18n: file kmplot.kcfg line 141
#: rc.cpp:1603
#, no-c-format
msgid "Enter the color of the axis lines."
msgstr "輸入軸線的顏色。"

#. i18n: file kmplot.kcfg line 144
#: rc.cpp:1606
#, no-c-format
msgid "Grid Color"
msgstr "格線顏色"

#. i18n: file kmplot.kcfg line 145
#: rc.cpp:1609
#, no-c-format
msgid "Choose a color for the grid lines."
msgstr "選擇格線的顏色。"

#. i18n: file kmplot.kcfg line 149
#: rc.cpp:1612
#, no-c-format
msgid "Color of function 1"
msgstr "函數 1 的顏色"

#. i18n: file kmplot.kcfg line 150
#: rc.cpp:1615
#, no-c-format
msgid "Choose a color for function 1."
msgstr "選擇函數 1 的顏色。"

#. i18n: file kmplot.kcfg line 154
#: rc.cpp:1618
#, no-c-format
msgid "Color of function 2"
msgstr "函數 2 的顏色"

#. i18n: file kmplot.kcfg line 155
#: rc.cpp:1621
#, no-c-format
msgid "Choose a color for function 2."
msgstr "選擇函數 2 的顏色。"

#. i18n: file kmplot.kcfg line 159
#: rc.cpp:1624
#, no-c-format
msgid "Color of function 3"
msgstr "函數 3 的顏色"

#. i18n: file kmplot.kcfg line 160
#: rc.cpp:1627
#, no-c-format
msgid "Choose a color for function 3."
msgstr "選擇函數 3 的顏色。"

#. i18n: file kmplot.kcfg line 164
#: rc.cpp:1630
#, no-c-format
msgid "Color of function 4"
msgstr "函數 4 的顏色"

#. i18n: file kmplot.kcfg line 165
#: rc.cpp:1633
#, no-c-format
msgid "Choose a color for function 4."
msgstr "選擇函數 4 的顏色。"

#. i18n: file kmplot.kcfg line 169
#: rc.cpp:1636
#, no-c-format
msgid "Color of function 5"
msgstr "函數 5 的顏色"

#. i18n: file kmplot.kcfg line 170
#: rc.cpp:1639
#, no-c-format
msgid "Choose a color for function 5."
msgstr "選擇函數 5 的顏色。"

#. i18n: file kmplot.kcfg line 174
#: rc.cpp:1642
#, no-c-format
msgid "Color of function 6"
msgstr "函數 6 的顏色"

#. i18n: file kmplot.kcfg line 175
#: rc.cpp:1645
#, no-c-format
msgid "Choose a color for function 6."
msgstr "選擇函數 6 的顏色。"

#. i18n: file kmplot.kcfg line 179
#: rc.cpp:1648
#, no-c-format
msgid "Color of function 7"
msgstr "函數 7 的顏色"

#. i18n: file kmplot.kcfg line 180
#: rc.cpp:1651
#, no-c-format
msgid "Choose a color for function 7."
msgstr "選擇函數 7 的顏色。"

#. i18n: file kmplot.kcfg line 184
#: rc.cpp:1654
#, no-c-format
msgid "Color of function 8"
msgstr "函數 8 的顏色"

#. i18n: file kmplot.kcfg line 185
#: rc.cpp:1657
#, no-c-format
msgid "Choose a color for function 8."
msgstr "選擇函數 8 的顏色。"

#. i18n: file kmplot.kcfg line 189
#: rc.cpp:1660
#, no-c-format
msgid "Color of function 9"
msgstr "函數 9 的顏色"

#. i18n: file kmplot.kcfg line 190
#: rc.cpp:1663
#, no-c-format
msgid "Choose a color for function 9."
msgstr "選擇函數 9 的顏色。"

#. i18n: file kmplot.kcfg line 194
#: rc.cpp:1666
#, no-c-format
msgid "Color of function 10"
msgstr "函數 10 的顏色"

#. i18n: file kmplot.kcfg line 195
#: rc.cpp:1669
#, no-c-format
msgid "Choose a color for function 10."
msgstr "選擇函數 10 的顏色。"

#. i18n: file kmplot.kcfg line 202
#: rc.cpp:1672
#, no-c-format
msgid "Step width in pixel"
msgstr "像素的步進寬度"

#. i18n: file kmplot.kcfg line 203
#: rc.cpp:1675
#, no-c-format
msgid ""
"The greater the step width the faster but the less precise the plot is done."
msgstr "步進寬度越大，繪圖完成越快，但精確度就越低。"

#. i18n: file kmplot.kcfg line 207
#: rc.cpp:1678
#, no-c-format
msgid "Use relative step width"
msgstr "使用相對步進寬度"

#. i18n: file kmplot.kcfg line 212
#: rc.cpp:1684
#, no-c-format
msgid "Radians instead of degrees"
msgstr "使用弧度而非角度"

#. i18n: file kmplot.kcfg line 213
#: rc.cpp:1687
#, no-c-format
msgid "Check the box if you want to use radians"
msgstr "如果您想要使用弧度，請勾選此項目"

#. i18n: file kmplot.kcfg line 217
#: rc.cpp:1690
#, no-c-format
msgid "Background color"
msgstr "背景顏色"

#. i18n: file kmplot.kcfg line 218
#: rc.cpp:1693
#, no-c-format
msgid "The background color for the graph"
msgstr "圖形的背景顏色"

#. i18n: file kmplot.kcfg line 222
#: rc.cpp:1696
#, no-c-format
msgid "Zoom-in step"
msgstr "放大步進"

#. i18n: file kmplot.kcfg line 223
#: rc.cpp:1699
#, no-c-format
msgid "The value the zoom-in tool should use"
msgstr "放大工具應該使用的值"

#. i18n: file kmplot.kcfg line 227
#: rc.cpp:1702
#, no-c-format
msgid "Zoom-out step"
msgstr "縮小步進"

#. i18n: file kmplot.kcfg line 228
#: rc.cpp:1705
#, no-c-format
msgid "The value the zoom-out tool should use"
msgstr "縮小工具應該使用的值"

#: View.cpp:440 View.cpp:1783
msgid "The drawing was cancelled by the user."
msgstr "繪圖已被使用者取消。"

#: View.cpp:478
msgid "Parameters:"
msgstr "參數："

#: View.cpp:479
msgid "Plotting Area"
msgstr "繪圖區"

#: View.cpp:480
msgid "Axes Division"
msgstr "軸分割"

#: View.cpp:481
msgid "Printing Format"
msgstr "列印格式"

#: View.cpp:482
msgid "x-Axis:"
msgstr "X 軸："

#: View.cpp:483
msgid "y-Axis:"
msgstr "Y 軸："

#: View.cpp:491
msgid "Functions:"
msgstr "函數："

#: View.cpp:681
msgid "root"
msgstr "根"

#: View.cpp:1897
msgid "Are you sure you want to remove this function?"
msgstr "您確定想要刪除此函數嗎？"

#: xparser.cpp:120
msgid "Error in extension."
msgstr "擴展中發生錯誤。"

#: xparser.cpp:769
msgid "There are no other Kmplot instances running"
msgstr "目前沒有其它正在運行的 Kmplot"

#: xparser.cpp:781
msgid "kmplot"
msgstr "kmplot"

#: xparser.cpp:781
msgid ""
"Choose which KmPlot instance\n"
"you want to copy the function to:"
msgstr "選擇您想要將函數複製到哪個 KmPlot 實體："

#: xparser.cpp:807 xparser.cpp:816
msgid "An error appeared during the transfer"
msgstr "傳送過程中發生錯誤"

#: kconstanteditor.cpp:95
msgid "A function uses this constant; therefore, it cannot be removed."
msgstr "有函數使用此常數；所以無法刪除此常數。"

#: kconstanteditor.cpp:111 kconstanteditor.cpp:190
msgid "The item could not be found."
msgstr "找不到項目。"

#: kconstanteditor.cpp:158
msgid "Choose Name"
msgstr "選擇名稱"

#: kconstanteditor.cpp:158
msgid "Choose a name for the constant:"
msgstr "選擇常數名稱："

#: MainDlg.cpp:94
msgid "Enter a function equation, for example: f(x)=x^2"
msgstr "輸入一個函數方程式，如 f(x)=x^2"

#: MainDlg.cpp:108
msgid "General"
msgstr "常規"

#: MainDlg.cpp:108
msgid "General Settings"
msgstr "常規設定"

#: MainDlg.cpp:109
msgid "Constants"
msgstr "常數"

#: MainDlg.cpp:133
msgid "Configure KmPlot..."
msgstr "設定 KmPlot..."

#: MainDlg.cpp:140
msgid "E&xport..."
msgstr "匯出(&X)..."

#: MainDlg.cpp:143
msgid "&No Zoom"
msgstr "不縮放(&N)"

#: MainDlg.cpp:144
msgid "Zoom &Rectangular"
msgstr "矩形縮放(&R)"

#: MainDlg.cpp:145
msgid "Zoom &In"
msgstr "放大(&I)"

#: MainDlg.cpp:146
msgid "Zoom &Out"
msgstr "縮小(&O)"

#: MainDlg.cpp:147
msgid "&Center Point"
msgstr "中點(&C)"

#: MainDlg.cpp:148
msgid "&Fit Widget to Trigonometric Functions"
msgstr "調整元件配合三角函數(&F)"

#: MainDlg.cpp:157
msgid "Predefined &Math Functions"
msgstr "預先定義的數學函數(&M)"

#: MainDlg.cpp:160
msgid "&Colors..."
msgstr "顏色(&C)..."

#: MainDlg.cpp:161
msgid "&Coordinate System..."
msgstr "座標系(&C)..."

#: MainDlg.cpp:163
msgid "&Scaling..."
msgstr "縮放(&S)..."

#: MainDlg.cpp:164
msgid "&Fonts..."
msgstr "字型(&F)..."

#: MainDlg.cpp:166
msgid "Coordinate System I"
msgstr "座標系 I"

#: MainDlg.cpp:167
msgid "Coordinate System II"
msgstr "座標系 II"

#: MainDlg.cpp:168
msgid "Coordinate System III"
msgstr "座標系 III"

#: MainDlg.cpp:171
msgid "&New Function Plot..."
msgstr "新增函數圖(&N)..."

#: MainDlg.cpp:172
msgid "New Parametric Plot..."
msgstr "新增參數函數圖..."

#: MainDlg.cpp:173
msgid "New Polar Plot..."
msgstr "新增極座標圖..."

#: MainDlg.cpp:174
msgid "Edit Plots..."
msgstr "編輯圖..."

#: MainDlg.cpp:177
msgid "&Get y-Value..."
msgstr "獲得 y 值(&G)..."

#: MainDlg.cpp:178
msgid "&Search for Minimum Value..."
msgstr "搜尋最小值(&S)..."

#: MainDlg.cpp:179
msgid "&Search for Maximum Value..."
msgstr "搜尋最大值(&S)..."

#: MainDlg.cpp:180
msgid "&Calculate Integral"
msgstr "計算積分(&C)"

#: MainDlg.cpp:183
msgid "Quick Edit"
msgstr "快速編輯"

#: MainDlg.cpp:184
msgid ""
"Enter a simple function equation here.\n"
"For instance: f(x)=x^2\n"
"For more options use Functions->Edit Plots... menu."
msgstr ""
"在此輸入簡單函數方程式。\n"
"例如：f(x)=x^2\n"
"要查看更改選項，請使用選單中的函數->編輯圖...。"

#: MainDlg.cpp:187
msgid "Show Slider 1"
msgstr "顯示滑動器 1"

#: MainDlg.cpp:188
msgid "Show Slider 2"
msgstr "顯示滑動器 2"

#: MainDlg.cpp:189
msgid "Show Slider 3"
msgstr "顯示滑動器 3"

#: MainDlg.cpp:190
msgid "Show Slider 4"
msgstr "顯示滑動器 4"

#: MainDlg.cpp:202
msgid "&Move"
msgstr "移動(&M)"

#: MainDlg.cpp:214
msgid ""
"The plot has been modified.\n"
"Do you want to save it?"
msgstr ""
"繪圖已經修改。\n"
"您想要儲存嗎？"

#: MainDlg.cpp:252
msgid ""
"This file is saved with an old file format; if you save it, you cannot open the "
"file with older versions of Kmplot. Are you sure you want to continue?"
msgstr "此檔案是以舊檔案格式儲存的；如果您儲存的話，您將無法使用舊版本的 KmPlot 開啟該檔案。您確定想要繼續嗎？"

#: MainDlg.cpp:252
msgid "Save New Format"
msgstr "儲存新格式"

#: MainDlg.cpp:266
msgid ""
"*.fkt|KmPlot Files (*.fkt)\n"
"*|All Files"
msgstr ""
"*.fkt|KmPlot 檔案 (*.fkt)\n"
"*|所有檔案"

#: MainDlg.cpp:274
msgid "The file could not be saved"
msgstr "無法儲存檔案"

#: MainDlg.cpp:290
msgid ""
"*.svg|Scalable Vector Graphics (*.svg)\n"
"*.bmp|Bitmap 180dpi (*.bmp)\n"
"*.png|Bitmap 180dpi (*.png)"
msgstr ""
"*.svg|可縮放向量圖像(*.svg)\n"
"*.bmp|180dpi 位圖(*.bmp)\n"
"*.png|180dpi 位圖(*.png)"

#: MainDlg.cpp:309 MainDlg.cpp:325 MainDlg.cpp:341
msgid "The URL could not be saved."
msgstr "無法儲存 URL。"

#: MainDlg.cpp:395
msgid "Print Plot"
msgstr "列印圖像"

#: MainDlg.cpp:407
msgid "Colors"
msgstr "顏色"

#: MainDlg.cpp:407
msgid "Edit Colors"
msgstr "編輯顏色"

#: MainDlg.cpp:433
msgid "Scale"
msgstr "比例"

#: MainDlg.cpp:433
msgid "Edit Scaling"
msgstr "編輯縮放"

#: MainDlg.cpp:445
msgid "Edit Fonts"
msgstr "編輯字型"

#: MainDlg.cpp:538
msgid ""
"Parametric functions must be definied in the \"New Parametric Plot\"-dialog "
"which you can find in the menubar"
msgstr "參數函數必須在“新增參數函數圖”對話框中定義，您可選單欄中找到這一功能"

#: MainDlg.cpp:543
msgid "Recursive function is not allowed"
msgstr "不允許使用遞迴函數"

#: MainDlg.cpp:802
msgid "KmPlotPart"
msgstr "KmPlotPart"

#: coordsconfigdialog.cpp:39
msgid "Coords"
msgstr "座標"

#: coordsconfigdialog.cpp:39
msgid "Edit Coordinate System"
msgstr "編輯座標系"

#: editfunction.cpp:62
msgid "Function"
msgstr "函數"

#: editfunction.cpp:64
msgid "Derivatives"
msgstr "導函數"

#: editfunction.cpp:70
#, c-format
msgid "Slider No. %1"
msgstr "第 %1 個滑動器"

#: editfunction.cpp:180
msgid "You can only define plot functions in this dialog"
msgstr "您只能在此對話框中定義繪圖函數"

#: editfunction.cpp:247
msgid "Please insert a valid x-value"
msgstr "請插入有效的 x 值"

#: editfunction.cpp:259
msgid "Please insert a valid y-value"
msgstr "請插入有效的 y 值"

#: editfunction.cpp:301
msgid "Recursive function is only allowed when drawing integral graphs"
msgstr "只能在繪製積分圖時使用遞迴函數"