# translation of kopete.po to Chinese Traditional # Kopete Traditional Chinese Translation # # Sonyu Chen , 2005. # Frank Weng (a.k.a. Franklin) , 2006, 2007. # Franklin Weng , 2007, 2008. msgid "" msgstr "" "Project-Id-Version: kopete\n" "POT-Creation-Date: 2019-01-23 23:20+0100\n" "PO-Revision-Date: 2008-02-04 08:21+0800\n" "Last-Translator: Franklin Weng \n" "Language-Team: Chinese Traditional \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" #: _translatorinfo:1 kopete/main.cpp:96 msgid "" "_: NAME OF TRANSLATORS\n" "Your names" msgstr "Sonyu Chen, Frank Weng (a.k.a. Franklin)" #: _translatorinfo:2 kopete/main.cpp:97 msgid "" "_: EMAIL OF TRANSLATORS\n" "Your emails" msgstr "sonyu@micro.ee.nthu.edu.tw,franklin at goodhorse dot idv dot tw" # TERM: messaging service 傳訊服務 #: kopete/addaccountwizard/addaccountwizard.cpp:49 msgid "" "_: 1st message shown to users on first run of Kopete. Please keep the " "formatting.\n" "

Welcome to Kopete

Which messaging service do you want to connect " "to?

" msgstr "

歡迎使用 Kopete

您想連線到哪個傳訊服務呢?

" # DECISION: 從 kde 3.5 beta 2 的中文翻譯來看,config 翻成設定的比組態多很多。 # DECISION (configure 一面倒, configuration 約 2:1),所以就跟著翻設定了。 # DECISION 雖然這樣跟 settings 就分不清楚,但通常不會有 config/settings 同時存 # DECISION 在的且意思不同的情形,所以無妨。 # POLICY: 左右箭號都由全形的 > - < 來表示,雖然有→←,但某些情況下字出不來,所以不用。 # POLICY: 如果訊息中單獨出現 `' ``'',都改成中文單括號。 #: kopete/addaccountwizard/addaccountwizard.cpp:56 msgid "" "_: 2nd message shown to users on first run of Kopete. Please keep the " "formatting.\n" "

Congratulations

You have finished configuring the account. You " "can add more accounts with Settings->Configure. Please click the " "\"Finish\" button.

" msgstr "" "

恭喜

您已經完成了帳號的設定。您可以加入更多帳號。請按一下「完成」" "按鈕。

" #: kopete/addaccountwizard/addaccountwizard.cpp:131 msgid "Cannot load the %1 protocol plugin." msgstr "無法載入協定 %1 的外掛程式。" #: kopete/addaccountwizard/addaccountwizard.cpp:132 #: kopete/addaccountwizard/addaccountwizard.cpp:141 msgid "Error While Adding Account" msgstr "加入帳號時發生錯誤" #: kopete/addaccountwizard/addaccountwizard.cpp:140 msgid "This protocol does not currently support adding accounts." msgstr "此協定目前尚未支援增加聯絡人" #: kopete/addaccountwizard/addaccountwizard.cpp:145 msgid "Step Two: Account Information" msgstr "步驟二: 帳號資訊" #: kopete/addcontactwizard/addcontactwizard.cpp:163 #: kopete/contactlist/kopetecontactlistview.cpp:599 #: kopete/contactlist/kopetemetacontactlvi.cpp:645 msgid "New Group" msgstr "新群組" #: kopete/addcontactwizard/addcontactwizard.cpp:164 #: kopete/contactlist/kopetecontactlistview.cpp:600 #: kopete/contactlist/kopetemetacontactlvi.cpp:645 msgid "Please enter the name for the new group:" msgstr "請輸入新群組的名稱:" #: kopete/addcontactwizard/addcontactwizard.cpp:286 msgid "" "_: The user has to select the contact to add to the given account name\n" "Choose New Contact For %1 Account %2" msgstr "選擇加入協定 %1 的帳號 %2 的新聯絡人。" #: kopete/addcontactwizard/fastaddcontactwizard.cpp:89 msgid "" "_: The account name is prepended here\n" "%1 contact information" msgstr "%1 聯絡人資訊" #: kopete/chatwindow/chatmessagepart.cpp:266 #: kopete/chatwindow/chatmessagepart.cpp:291 #, fuzzy msgid "Import Emoticon" msgstr "匯入聯絡人(&I)" #: kopete/chatwindow/chatmessagepart.cpp:267 #: plugins/history/historydialog.cpp:178 msgid "Copy Link Address" msgstr "複製超連結" #: kopete/chatwindow/chatmessagepart.cpp:292 msgid "" "
Insert the string for the emoticon
separated by " "space if you want multiple strings
" msgstr "" #: kopete/chatwindow/chatmessagepart.cpp:339 msgid "Save Conversation" msgstr "儲存對話" #: kopete/chatwindow/chatmessagepart.cpp:377 msgid "Could not open %1 for writing." msgstr "無法開啟 %1 以寫入。" #: kopete/chatwindow/chatmessagepart.cpp:378 msgid "Error While Saving" msgstr "儲存時發生錯誤" #: kopete/chatwindow/chatmessagepart.cpp:726 msgid "User Has Left" msgstr "使用者已經離開" #: kopete/chatwindow/chatview.cpp:356 #: kopete/chatwindow/kopeteemailwindow.cpp:425 msgid "" "You are about to leave the group chat session %1.
You will not " "receive future messages from this conversation.
" msgstr "" "您打算離開群組聊天室 %1 了。
您將不會再收到此對話的任何訊息。" "
" #: kopete/chatwindow/chatview.cpp:357 #: kopete/chatwindow/kopeteemailwindow.cpp:426 msgid "Closing Group Chat" msgstr "關閉群組聊天" #: kopete/chatwindow/chatview.cpp:358 kopete/chatwindow/chatview.cpp:365 #: kopete/chatwindow/chatview.cpp:372 #: kopete/chatwindow/kopeteemailwindow.cpp:427 #: kopete/chatwindow/kopeteemailwindow.cpp:434 #: kopete/chatwindow/kopeteemailwindow.cpp:441 msgid "Cl&ose Chat" msgstr "關閉聊天視窗(&S)" #: kopete/chatwindow/chatview.cpp:363 #: kopete/chatwindow/kopeteemailwindow.cpp:432 msgid "" "You have received a message from %1 in the last second. Are you " "sure you want to close this chat?" msgstr "您剛剛接收到來自 %1 的訊息。您確定要關閉此次聊天嗎?" #: kopete/chatwindow/chatview.cpp:364 #: kopete/chatwindow/kopeteemailwindow.cpp:433 msgid "Unread Message" msgstr "未讀訊息" #: kopete/chatwindow/chatview.cpp:370 #: kopete/chatwindow/kopeteemailwindow.cpp:439 msgid "" "You have a message send in progress, which will be aborted if this chat is " "closed. Are you sure you want to close this chat?" msgstr "" "您有正在送出的訊息,如果此時關閉聊天視窗,訊息會被取消。您確定要關閉聊天視窗" "嗎?" #: kopete/chatwindow/chatview.cpp:371 #: kopete/chatwindow/kopeteemailwindow.cpp:440 msgid "Message in Transit" msgstr "訊息傳送中" #: kopete/chatwindow/chatview.cpp:408 #, c-format msgid "" "_n: One other person in the chat\n" "%n other people in the chat" msgstr "聊天室中尚有 %n 人。" #: kopete/chatwindow/chatview.cpp:551 msgid "%1 is typing a message" msgstr "%1 正在輸入訊息" #: kopete/chatwindow/chatview.cpp:555 msgid "" "_: %1 is a list of names\n" "%1 are typing a message" msgstr "%1 正在輸入訊息" #: kopete/chatwindow/chatview.cpp:597 kopete/chatwindow/chatview.cpp:606 msgid "%1 is now known as %2" msgstr "%1 現在改名為 %2" #: kopete/chatwindow/chatview.cpp:635 msgid "%1 has joined the chat." msgstr "%1 加入聊天室。" #: kopete/chatwindow/chatview.cpp:686 msgid "%1 has left the chat." msgstr "%1 已經離開聊天室。" #: kopete/chatwindow/chatview.cpp:688 msgid "%1 has left the chat (%2)." msgstr "%1 已經離開聊天室(%2)。" #: kopete/chatwindow/chatview.cpp:788 #, c-format msgid "You are now marked as %1." msgstr "您現在標示為 %1。" #: kopete/chatwindow/chatview.cpp:795 kopete/chatwindow/chatview.cpp:801 msgid "%2 is now %1." msgstr "%2 現在是 %1 了。" #: kopete/chatwindow/kopetechatwindow.cpp:194 #: kopete/chatwindow/kopeteemailwindow.cpp:466 #: kopete/chatwindow/kopeteemailwindow.cpp:484 msgid "Send" msgstr "傳送" #: kopete/chatwindow/kopetechatwindow.cpp:205 msgid "Ready." msgstr "就緒。" #: kopete/chatwindow/kopetechatwindow.cpp:316 #: kopete/chatwindow/kopeteemailwindow.cpp:209 msgid "&Send Message" msgstr "傳送訊息(&S)" #: kopete/chatwindow/kopetechatwindow.cpp:323 msgid "Close All Chats" msgstr "關閉所有聊天" #: kopete/chatwindow/kopetechatwindow.cpp:327 msgid "&Activate Next Tab" msgstr "換到下一個分頁" #: kopete/chatwindow/kopetechatwindow.cpp:329 msgid "&Activate Previous Tab" msgstr "換到上一個分頁" #: kopete/chatwindow/kopetechatwindow.cpp:334 msgid "Nic&k Completion" msgstr "暱稱補全(&K)" #: kopete/chatwindow/kopetechatwindow.cpp:337 msgid "&Detach Chat" msgstr "分離聊天視窗(&D)" #: kopete/chatwindow/kopetechatwindow.cpp:341 msgid "&Move Tab to Window" msgstr "移動分頁到視窗(&M)" #: kopete/chatwindow/kopetechatwindow.cpp:347 msgid "&Tab Placement" msgstr "標籤位置(&T)" #: kopete/chatwindow/kopetechatwindow.cpp:357 msgid "Set Default &Font..." msgstr "設定預設字型(&F)..." #: kopete/chatwindow/kopetechatwindow.cpp:358 msgid "Set Default Text &Color..." msgstr "設定預設文字顏色(&C)..." #: kopete/chatwindow/kopetechatwindow.cpp:359 #: kopete/chatwindow/kopeteemailwindow.cpp:224 msgid "Set &Background Color..." msgstr "設定背景顏色(&B)..." #: kopete/chatwindow/kopetechatwindow.cpp:361 msgid "Previous History" msgstr "較早的記錄" #: kopete/chatwindow/kopetechatwindow.cpp:365 msgid "Next History" msgstr "較晚的記錄" #: kopete/chatwindow/kopetechatwindow.cpp:374 msgid "Place to Left of Chat Area" msgstr "放在聊天區左邊" #: kopete/chatwindow/kopetechatwindow.cpp:376 msgid "Place to Right of Chat Area" msgstr "放在聊天區右邊" #: kopete/chatwindow/kopetechatwindow.cpp:378 msgid "Show" msgstr "顯示" #: kopete/chatwindow/kopetechatwindow.cpp:380 msgid "Hide" msgstr "隱藏" #: kopete/chatwindow/kopetechatwindow.cpp:381 msgid "Automatic Spell Checking" msgstr "自動拼字檢查" #: kopete/chatwindow/kopetechatwindow.cpp:389 msgid "Co&ntacts" msgstr "聯絡人(&N)" #: kopete/chatwindow/kopetechatwindow.cpp:415 #: kopete/chatwindow/kopeteemailwindow.cpp:248 msgid "Toolbar Animation" msgstr "工具列動畫" #: kopete/chatwindow/kopetechatwindow.cpp:608 msgid "Close the current tab" msgstr "關閉目前分頁" #: kopete/chatwindow/kopetechatwindow.cpp:996 msgid "More..." msgstr "更多..." #: kopete/chatwindow/kopetechatwindow.cpp:1199 msgid "Plugin Actions" msgstr "外掛程式動作" #: kopete/chatwindow/kopeteemailwindow.cpp:155 msgid "<< Prev" msgstr "<< 上一個" #: kopete/chatwindow/kopeteemailwindow.cpp:160 msgid "(0) Next >>" msgstr "(0) 下一個 >>" #: kopete/chatwindow/kopeteemailwindow.cpp:220 msgid "&Set Font..." msgstr "設定字型(&S)..." #: kopete/chatwindow/kopeteemailwindow.cpp:222 msgid "Set Text &Color..." msgstr "設定文字顏色(&C)..." #: kopete/chatwindow/kopeteemailwindow.cpp:347 msgid "(%1) Next >>" msgstr "(%1) 下一個 >>" #: kopete/chatwindow/kopeteemailwindow.cpp:473 #: protocols/irc/ui/irceditaccount.ui:774 #, no-c-format msgid "Reply" msgstr "回覆" #: kopete/chatwindow/kopeteemoticonaction.cpp:65 msgid "Add Smiley" msgstr "加入表情" #: kopete/chatwindow/krichtexteditpart.cpp:117 msgid "KopeteRichTextEditPart" msgstr "KopeteRichTextEditPart" #: kopete/chatwindow/krichtexteditpart.cpp:118 msgid "A simple rich text editor part for Kopete" msgstr "Kopete 的簡單 richtext 編輯器" #: kopete/chatwindow/krichtexteditpart.cpp:127 msgid "Enable &Rich Text" msgstr "啟用 RichText (&R)" #: kopete/chatwindow/krichtexteditpart.cpp:129 msgid "Disable &Rich Text" msgstr "停用 RichText (&R)" #: kopete/chatwindow/krichtexteditpart.cpp:133 msgid "Check &Spelling" msgstr "檢查拼字(&S)" #: kopete/chatwindow/krichtexteditpart.cpp:137 msgid "Text &Color..." msgstr "文字顏色(&C)..." #: kopete/chatwindow/krichtexteditpart.cpp:142 msgid "Background Co&lor..." msgstr "背景顏色(&L)..." #: kopete/chatwindow/krichtexteditpart.cpp:147 msgid "&Font" msgstr "字型(&F)" #: kopete/chatwindow/krichtexteditpart.cpp:153 msgid "Font &Size" msgstr "字型大小(&S)" #: kopete/chatwindow/krichtexteditpart.cpp:159 msgid "&Bold" msgstr "粗體(&B)" #: kopete/chatwindow/krichtexteditpart.cpp:164 msgid "&Italic" msgstr "斜體(&I)" #: kopete/chatwindow/krichtexteditpart.cpp:169 msgid "&Underline" msgstr "底線(&U)" #: kopete/chatwindow/krichtexteditpart.cpp:183 msgid "Align &Left" msgstr "向左對齊(&L)" #: kopete/chatwindow/krichtexteditpart.cpp:188 msgid "Align &Center" msgstr "向中對齊(&C)" #: kopete/chatwindow/krichtexteditpart.cpp:193 msgid "Align &Right" msgstr "向右對齊(&R)" #: kopete/chatwindow/krichtexteditpart.cpp:198 msgid "&Justify" msgstr "兩端對齊(&J)" #: kopete/config/accounts/kopeteaccountconfig.cpp:198 #: libkopete/kopeteaccount.cpp:514 msgid "Edit Account" msgstr "編輯帳號" #: kopete/config/accounts/kopeteaccountconfig.cpp:234 msgid "Are you sure you want to remove the account \"%1\"?" msgstr "您確定要移除帳號 %1 ?" #: kopete/config/accounts/kopeteaccountconfig.cpp:235 msgid "Remove Account" msgstr "移除帳號" #: kopete/config/appearance/appearanceconfig.cpp:152 #: kopete/config/appearance/appearanceconfig.cpp:653 msgid "The Chat Window style was successfully installed." msgstr "已成功安裝此聊天視窗風格。" #: kopete/config/appearance/appearanceconfig.cpp:152 #: kopete/config/appearance/appearanceconfig.cpp:653 msgid "Install successful" msgstr "安裝成功" #: kopete/config/appearance/appearanceconfig.cpp:157 #: kopete/config/appearance/appearanceconfig.cpp:640 msgid "" "The specified archive cannot be opened.\n" "Make sure that the archive is valid ZIP or TAR archive." msgstr "無法開啟指定的壓縮文件。請確定它是合法的 ZIP 或 TAR 壓縮檔。" #: kopete/config/appearance/appearanceconfig.cpp:157 msgid "Cannot open archive" msgstr "無法開啟壓縮文件" #: kopete/config/appearance/appearanceconfig.cpp:162 #: kopete/config/appearance/appearanceconfig.cpp:645 msgid "" "Could not find a suitable place to install the Chat Window style in user " "directory." msgstr "在使用者目錄中找不到合適的地方安裝聊天視窗風格。" #: kopete/config/appearance/appearanceconfig.cpp:162 msgid "Cannot find styles directory" msgstr "找不到風格目錄" #: kopete/config/appearance/appearanceconfig.cpp:167 #: kopete/config/appearance/appearanceconfig.cpp:649 msgid "The specified archive does not contain a valid Chat Window style." msgstr "指定的壓縮文件中並沒有合法的聊天視窗風格。" #: kopete/config/appearance/appearanceconfig.cpp:167 #: kopete/config/appearance/appearanceconfig.cpp:649 msgid "Invalid Style" msgstr "無效的風格" #: kopete/config/appearance/appearanceconfig.cpp:174 #: kopete/config/appearance/appearanceconfig.cpp:659 msgid "An unknow error occurred while trying to install the Chat Window style." msgstr "要安裝聊天視窗風格時發生未知的錯誤。" #: kopete/config/appearance/appearanceconfig.cpp:174 #: kopete/config/appearance/appearanceconfig.cpp:659 msgid "Unknow error" msgstr "未知的錯誤" #: kopete/config/appearance/appearanceconfig.cpp:212 msgid "&Emoticons" msgstr "表情圖示(&E)" #: kopete/config/appearance/appearanceconfig.cpp:251 #: kopete/config/appearance/appearanceconfig_colors.ui:33 #, no-c-format msgid "Chat Window" msgstr "聊天視窗" #: kopete/config/appearance/appearanceconfig.cpp:287 #: kopete/config/appearance/appearanceconfig_colors.ui:190 #, no-c-format msgid "Contact List" msgstr "聯絡人清單" #: kopete/config/appearance/appearanceconfig.cpp:325 msgid "Colors && Fonts" msgstr "色彩及字型" #: kopete/config/appearance/appearanceconfig.cpp:589 msgid "(No Variant)" msgstr "(沒有變化)" #: kopete/config/appearance/appearanceconfig.cpp:627 msgid "Choose Chat Window style to install." msgstr "選擇要安裝的聊天室風格。" #: kopete/config/appearance/appearanceconfig.cpp:640 msgid "Can't open archive" msgstr "無法開啟壓縮文件" #: kopete/config/appearance/appearanceconfig.cpp:645 msgid "Can't find styles directory" msgstr "找不到風格目錄" #: kopete/config/appearance/appearanceconfig.cpp:676 msgid "" "_: It's the deleted style name\n" "The style %1 was successfully deleted." msgstr "風格「%1」已成功刪除。" #: kopete/config/appearance/appearanceconfig.cpp:685 msgid "" "_: It's the deleted style name\n" "An error occured while trying to delete %1 style." msgstr "刪除風格「%1」時發生錯誤。" #: kopete/config/appearance/appearanceconfig.cpp:743 msgid "" "_: This is the myself preview contact id\n" "myself@preview" msgstr "myself@preview" #: kopete/config/appearance/appearanceconfig.cpp:744 msgid "" "_: This is the myself preview contact nickname\n" "Myself" msgstr "自己" #: kopete/config/appearance/appearanceconfig.cpp:746 msgid "" "_: This is the other preview contact id\n" "jack@preview" msgstr "jack@preview" #: kopete/config/appearance/appearanceconfig.cpp:747 msgid "" "_: This is the other preview contact nickname\n" "Jack" msgstr "Jack" #: kopete/config/appearance/appearanceconfig.cpp:748 msgid "Myself" msgstr "自己" # 菜市場名XD #: kopete/config/appearance/appearanceconfig.cpp:750 msgid "Jack" msgstr "傑克" #: kopete/config/appearance/appearanceconfig.cpp:762 msgid "Hello, this is an incoming message :-)" msgstr "嗨,這是個新進訊息 :-)" #: kopete/config/appearance/appearanceconfig.cpp:763 msgid "Hello, this is an incoming consecutive message." msgstr "嗨,這是個連續新進訊息 :-)" #: kopete/config/appearance/appearanceconfig.cpp:765 msgid "Ok, this is an outgoing message" msgstr "嗯,這是個外送訊息" #: kopete/config/appearance/appearanceconfig.cpp:766 msgid "Ok, a outgoing consecutive message." msgstr "嗯,這是個連續外送訊息" #: kopete/config/appearance/appearanceconfig.cpp:768 msgid "Here is an incoming colored message" msgstr "這是彩色新進訊息" #: kopete/config/appearance/appearanceconfig.cpp:771 msgid "This is an internal message" msgstr "這是內部訊息" #: kopete/config/appearance/appearanceconfig.cpp:772 msgid "performed an action" msgstr "執行某個動作" #: kopete/config/appearance/appearanceconfig.cpp:774 msgid "This is a highlighted message" msgstr "這是高亮度訊息" #: kopete/config/appearance/appearanceconfig.cpp:777 msgid "" "_: This special UTF-8 string is to test if the style support Right-to-Left " "language display.\n" "הודעות טקסט" msgstr "הודעות טקסט" #: kopete/config/appearance/appearanceconfig.cpp:778 msgid "" "That message was in a Right-to-Left language, which Kopete also supports." msgstr "該訊息使用的語言為由右到左,Kopete 也支援。" #: kopete/config/appearance/appearanceconfig.cpp:779 msgid "Bye" msgstr "掰掰" #: kopete/config/appearance/appearanceconfig.cpp:814 msgid "Drag or Type Emoticon Theme URL" msgstr "把表情圖示主題的網址拖拉到此,或是手動輸入" #: kopete/config/appearance/appearanceconfig.cpp:821 msgid "Sorry, emoticon themes must be installed from local files." msgstr "抱歉,表情圖示主題必須自本機檔案安裝。" #: kopete/config/appearance/appearanceconfig.cpp:822 msgid "Could Not Install Emoticon Theme" msgstr "無法安裝表情圖示主題" # 因為目前的表情符號主題通常是英文名字,所以還是前面空半形吧。 # 後面是全型標點,照例不加空白。 #: kopete/config/appearance/appearanceconfig.cpp:838 msgid "" "Are you sure you want to remove the %1 emoticon theme?" "

This will delete the files installed by this theme.
" msgstr "" "您確定要移除表情圖示主題 %1

這樣會刪除所有此主" "題安裝的檔案。
" #: kopete/config/appearance/appearanceconfig.cpp:844 msgid "Confirmation" msgstr "確認" #: kopete/config/appearance/appearanceconfig.cpp:863 msgid "Get New Emoticons" msgstr "抓新的表情圖示" #: kopete/config/appearance/emoticonseditdialog.cpp:58 msgid "" "Insert the string for the emoticon\n" "separated by space if you want multiple strings" msgstr "" #: kopete/config/appearance/emoticonseditdialog.cpp:82 #, fuzzy msgid "Emoticons Editor" msgstr "表情圖示(&E)" #: kopete/config/appearance/emoticonseditdialog.cpp:90 #: kopete/config/appearance/emoticonseditwidget.ui:43 #: plugins/highlight/highlightprefsbase.ui:167 #: protocols/gadu/gaducontact.cpp:204 #, no-c-format msgid "Edit..." msgstr "編輯..." #: kopete/config/appearance/tooltipeditdialog.cpp:56 msgid "Tooltip Editor" msgstr "工具提示編輯器" #: kopete/config/avdevice/avdeviceconfig.cpp:69 msgid "&Video" msgstr "視訊(&V)" #: kopete/config/behavior/behaviorconfig.cpp:59 #: kopete/contactlist/kopetegvipropswidget.ui:31 #: kopete/contactlist/kopetemetalvipropswidget.ui:31 #: protocols/jabber/ui/dlgvcard.ui:28 #, no-c-format msgid "&General" msgstr "一般(&G)" #: kopete/config/behavior/behaviorconfig.cpp:63 msgid "&Events" msgstr "事件(&E)" #: kopete/config/behavior/behaviorconfig.cpp:67 msgid "A&way Settings" msgstr "離開設定(&A)" #: kopete/config/behavior/behaviorconfig.cpp:71 msgid "Cha&t" msgstr "聊天" #: kopete/config/identity/globalidentitiesmanager.cpp:164 msgid "Default Identity" msgstr "預設身份" #: kopete/config/identity/kopeteidentityconfig.cpp:367 #: kopete/contactlist/kopetelviprops.cpp:357 msgid "No Contacts with Photo Support" msgstr "不支援聯絡人的相片功能" #: kopete/config/identity/kopeteidentityconfig.cpp:416 msgid "New Identity" msgstr "新身份" #: kopete/config/identity/kopeteidentityconfig.cpp:416 #: kopete/config/identity/kopeteidentityconfig.cpp:431 #: kopete/config/identity/kopeteidentityconfig.cpp:456 msgid "Identity name:" msgstr "身份名稱:" #: kopete/config/identity/kopeteidentityconfig.cpp:431 msgid "Copy Identity" msgstr "複製身份" #: kopete/config/identity/kopeteidentityconfig.cpp:446 #: kopete/config/identity/kopeteidentityconfig.cpp:474 msgid "An identity with the same name was found." msgstr "已經有相同名稱的身份了。" #: kopete/config/identity/kopeteidentityconfig.cpp:446 #: kopete/config/identity/kopeteidentityconfig.cpp:474 #: kopete/config/identity/kopeteidentityconfig.cpp:573 #: kopete/config/identity/kopeteidentityconfig.cpp:582 msgid "Identity Configuration" msgstr "身份設定" #: kopete/config/identity/kopeteidentityconfig.cpp:456 msgid "Rename Identity" msgstr "重新命名身份" #: kopete/config/identity/kopeteidentityconfig.cpp:506 #: libkopete/ui/addressbooklinkwidget.cpp:81 msgid "Addressbook Association" msgstr "通訊錄關聯" #: kopete/config/identity/kopeteidentityconfig.cpp:506 msgid "Choose the person who is yourself." msgstr "選擇您是哪一位。" #: kopete/config/identity/kopeteidentityconfig.cpp:572 #: kopete/config/identity/kopeteidentityconfig.cpp:581 msgid "An error occurred when trying to save the custom photo for %1 identity." msgstr "儲存身份 %1 的自訂相片時發生錯誤。" #: kopete/config/plugins/kopetepluginconfig.cpp:43 msgid "Configure Plugins" msgstr "設定外掛程式" #: kopete/config/plugins/kopetepluginconfig.cpp:44 msgid "&Reset" msgstr "重設(&R)" #: kopete/config/plugins/kopetepluginconfig.cpp:62 msgid "General Plugins" msgstr "一般外掛程式" #: kopete/contactlist/kopeteaddrbookexport.cpp:76 #: kopete/contactlist/kopeteaddrbookexport.cpp:83 #: kopete/contactlist/kopeteaddrbookexport.cpp:90 #: kopete/contactlist/kopeteaddrbookexport.cpp:99 #: kopete/contactlist/kopeteaddrbookexport.cpp:119 msgid "" msgstr "<尚未設定>" #: kopete/contactlist/kopeteaddrbookexport.cpp:177 msgid "Export to Address Book" msgstr "匯出到通訊錄" #: kopete/contactlist/kopeteaddrbookexport.cpp:181 msgid "Set address book fields using the selected data from Kopete" msgstr "使用從 Kopete 選取的資料來設定通訊錄欄位" #: kopete/contactlist/kopetecontactlistview.cpp:291 msgid "Online contacts (%1)" msgstr "線上聯絡人 (%1)" #: kopete/contactlist/kopetecontactlistview.cpp:292 msgid "Offline contacts (%1)" msgstr "離線聯絡人 (%1)" #: kopete/contactlist/kopetecontactlistview.cpp:447 msgid "Contacts" msgstr "聯絡人" #: kopete/contactlist/kopetecontactlistview.cpp:470 msgid "Create New Group..." msgstr "建立新群組..." #: kopete/contactlist/kopetecontactlistview.cpp:478 msgid "&Move To" msgstr "移動到(&M)" #: kopete/contactlist/kopetecontactlistview.cpp:480 msgid "&Copy To" msgstr "複製到(&C)" #: kopete/contactlist/kopetecontactlistview.cpp:485 msgid "Send Email..." msgstr "傳送電子郵件..." #: kopete/contactlist/kopetecontactlistview.cpp:488 #: kopete/contactlist/kopetecontactlistview.cpp:1395 msgid "Rename" msgstr "重新命名" #: kopete/contactlist/kopetecontactlistview.cpp:493 kopete/kopetewindow.cpp:208 #: protocols/irc/ui/ircadd.ui:34 #, no-c-format msgid "&Add Contact" msgstr "加入聯絡人(&A)" #: kopete/contactlist/kopetecontactlistview.cpp:495 msgid "Select Account" msgstr "選擇帳號" #: kopete/contactlist/kopetecontactlistview.cpp:497 msgid "Add to Your Contact List" msgstr "加入到您的聯絡人清單" #: kopete/contactlist/kopetecontactlistview.cpp:505 #: protocols/groupwise/ui/gwchatsearchwidget.ui:79 #, no-c-format msgid "&Properties" msgstr "屬性(&P)" #: kopete/contactlist/kopetecontactlistview.cpp:690 msgid "" "_: Translators: format: ' ()'\n" "%1 (%2)" msgstr "%1 (%2)" #: kopete/contactlist/kopetecontactlistview.cpp:715 msgid "" "_: Translators: format: ' ()'\n" "%2 <%1>" msgstr "%2 <%1>" #: kopete/contactlist/kopetecontactlistview.cpp:760 #: kopete/contactlist/kopetecontactlistview.cpp:991 #: kopete/contactlist/kopetecontactlistview.cpp:1007 #: kopete/contactlist/kopetecontactlistview.cpp:1477 kopete/main.cpp:52 #: protocols/irc/ui/irceditaccountwidget.cpp:275 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:535 #: protocols/oscar/liboscar/userdetails.cpp:323 #, no-c-format msgid "Kopete" msgstr "Kopete" #: kopete/contactlist/kopetecontactlistview.cpp:989 msgid "" "Would you like to add %1 to your contact list as a member of " "%2?" msgstr "您確定要新增 %1%2 的成員嗎?" #: kopete/contactlist/kopetecontactlistview.cpp:991 #: kopete/contactlist/kopetecontactlistview.cpp:1007 #: kopete/contactlist/kopetecontactlistview.cpp:1477 #: protocols/oscar/icq/icqprotocol.cpp:148 msgid "Do Not Add" msgstr "不要新增" #: kopete/contactlist/kopetecontactlistview.cpp:1005 msgid "" "Would you like to add %1 to your contact list as a child contact " "of %2?" msgstr "" "您確定要新增 %1 到您的聯絡人清單中,做為 %2 的子聯絡人嗎?" "" #: kopete/contactlist/kopetecontactlistview.cpp:1056 msgid "" "This contact is already on your contact list. It is a child contact of " "%1" msgstr "這個聯絡人已經在您的清單中了。它是 %1 的子聯絡人。" #: kopete/contactlist/kopetecontactlistview.cpp:1374 msgid "Rename Contact" msgstr "重新命名聯絡人" #: kopete/contactlist/kopetecontactlistview.cpp:1375 #: libkopete/kopetecontact.cpp:461 msgid "Remove Contact" msgstr "移除聯絡人" #: kopete/contactlist/kopetecontactlistview.cpp:1376 msgid "Send Single Message..." msgstr "傳送單一訊息..." #: kopete/contactlist/kopetecontactlistview.cpp:1379 msgid "&Add Subcontact" msgstr "新增子聯絡人(&A)" #: kopete/contactlist/kopetecontactlistview.cpp:1384 msgid "Rename Group" msgstr "重新命名群組" #: kopete/contactlist/kopetecontactlistview.cpp:1385 msgid "Remove Group" msgstr "刪除群組" #: kopete/contactlist/kopetecontactlistview.cpp:1386 msgid "Send Message to Group" msgstr "傳送訊息到群組" #: kopete/contactlist/kopetecontactlistview.cpp:1390 msgid "&Add Contact to Group" msgstr "加入聯絡人到群組(&A)" #: kopete/contactlist/kopetecontactlistview.cpp:1448 msgid "There is no email address set for this contact in the TDE address book." msgstr "這個聯絡人在 TDE 通訊錄中沒有設定電子郵件地址。" #: kopete/contactlist/kopetecontactlistview.cpp:1448 msgid "No Email Address in Address Book" msgstr "通訊錄中沒有電子郵件地址" #: kopete/contactlist/kopetecontactlistview.cpp:1451 msgid "" "This contact was not found in the TDE address book. Check that a contact is " "selected in the properties dialog." msgstr "" "這個聯絡人在 TDE 通訊錄中找不到。請檢查是否已經在內容對話框中選取聯絡人。" #: kopete/contactlist/kopetecontactlistview.cpp:1451 #: kopete/contactlist/kopetecontactlistview.cpp:1454 #: kopete/kimifaceimpl.cpp:383 msgid "Not Found in Address Book" msgstr "通訊錄中找不到" #: kopete/contactlist/kopetecontactlistview.cpp:1454 msgid "" "This contact is not associated with a TDE address book entry, where the " "email address is stored. Check that a contact is selected in the properties " "dialog." msgstr "" "您的 TDE 通訊錄中沒有這個聯絡人。請檢查您已經在內容對話框中選取聯絡人。" #: kopete/contactlist/kopetecontactlistview.cpp:1476 msgid "Would you like to add this contact to your contact list?" msgstr "您要將此聯絡人加入聯絡人清單中嗎?" #: kopete/contactlist/kopetecontactlistview.cpp:1556 msgid "" "Are you sure you want to remove the contact %1 from your contact " "list?" msgstr "您確定要從清單中移除聯絡人%1嗎?" #: kopete/contactlist/kopetecontactlistview.cpp:1562 msgid "" "Are you sure you want to remove the group %1 and all contacts " "that are contained within it?" msgstr "您確定要移除群組%1及其包含的所有聯絡人嗎?" #: kopete/contactlist/kopetecontactlistview.cpp:1579 msgid "Are you sure you want to remove these contacts from your contact list?" msgstr "您確定要從清單中移除這些聯絡人嗎?" #: kopete/contactlist/kopetecontactlistview.cpp:1581 msgid "" "Are you sure you want to remove these groups and contacts from your contact " "list?" msgstr "您確定要移除這些群組及聯絡人嗎?" #: kopete/contactlist/kopetecontactlistview.cpp:1689 #: kopete/kopetewindow.cpp:1061 msgid "Add Contact" msgstr "新增聯絡人" #: kopete/contactlist/kopetegrouplistaction.cpp:62 libkopete/kopetegroup.cpp:47 msgid "Top Level" msgstr "最上層(沒有群組)" #: kopete/contactlist/kopetegroupviewitem.cpp:169 msgid "" "_: (NUMBER OF ONLINE CONTACTS/NUMBER OF CONTACTS IN GROUP)\n" "(%1/%2)" msgstr "(%1/%2)" #: kopete/contactlist/kopetelviprops.cpp:69 #, c-format msgid "Properties of Group %1" msgstr "群組 %1 的屬性" #: kopete/contactlist/kopetelviprops.cpp:76 #: kopete/contactlist/kopetelviprops.cpp:169 msgid "Custom &Notifications" msgstr "自訂通知(&N)" #: kopete/contactlist/kopetelviprops.cpp:149 #, c-format msgid "Properties of Meta Contact %1" msgstr "整合聯絡人 %1 的屬性" #: kopete/contactlist/kopetelviprops.cpp:164 msgid "Sync KABC..." msgstr "同步 KABC..." #: kopete/contactlist/kopetelviprops.cpp:513 msgid "No contacts were imported from the address book." msgstr "沒有從此通訊錄中匯入任何聯絡人。" #: kopete/contactlist/kopetelviprops.cpp:514 msgid "No Change" msgstr "沒有改變" #: kopete/contactlist/kopetemetacontactlvi.cpp:134 msgid "" "_: STATUS ICON PROTOCOL NAME (ACCOUNT NAME)STATUS " "DESCRIPTION\n" " %2 (%3)%4" msgstr "" " %2 (%3)%4" #: kopete/contactlist/kopetemetacontactlvi.cpp:384 msgid "%1 is now %2." msgstr "%1 的狀態變成 %2 了。 " #: kopete/config/behavior/behaviorconfig_chat.ui:16 #: kopete/contactlist/kopetemetacontactlvi.cpp:441 #: kopete/contactlist/kopetemetacontactlvi.cpp:445 #, no-c-format msgid "Chat" msgstr "聊天" #: kopete/contactlist/tdeabcexport.cpp:90 msgid "No writeable addressbook resource found." msgstr "沒找到可寫入的通訊錄資源" #: kopete/contactlist/tdeabcexport.cpp:91 msgid "Add or enable one using the Trinity Control Center." msgstr "使用 TDE 控制中心來新增或開啟。" #: kopete/contactlist/tdeabcexport.cpp:102 msgid " (already in address book)" msgstr "(已在通訊錄)" #: kopete/kimifaceimpl.cpp:383 msgid "" "Another TDE application tried to use Kopete for instant messaging, but " "Kopete could not find the specified contact in the TDE address book." msgstr "" "另一個 TDE 程式試著使用 Kopete 做即時傳訊,但Kopete 在 TDE 通訊錄中找不到指定" "的聯絡人。" #: kopete/kimifaceimpl.cpp:388 msgid "" "_: Translators: %1 is the name of a person taken from the TDE address book, " "who Kopete doesn't know about. Kopete must either be told that an existing " "contact in Kopete is this person, or add a new contact for them\n" "

The TDE Address Book has no instant messaging information for

%1.

If he/she is already present in the Kopete contact " "list, indicate the correct addressbook entry in their properties.

Otherwise, add a new contact using the Add Contact wizard.

" msgstr "" "

TDE 通訊錄中沒有 %1 的即時訊息資訊。

如果此人已經在 " "Kopete 的聯絡人清單中,請在該聯絡人的內容中設定其在通訊錄中的哪裡。

否" "則,您可以使用新增聯絡人精靈來新增聯絡人。

" #: kopete/kimifaceimpl.cpp:390 msgid "No Instant Messaging Address" msgstr "找不到即時通訊地址" #: kopete/kopeteballoon.cpp:98 msgid "" "_: to view\n" "View" msgstr "檢視" #: kopete/kopeteballoon.cpp:100 protocols/irc/ui/irceditaccount.ui:602 #: protocols/irc/ui/irceditaccount.ui:635 #: protocols/irc/ui/irceditaccount.ui:686 #: protocols/irc/ui/irceditaccount.ui:724 protocols/yahoo/yahooaccount.cpp:1231 #: protocols/yahoo/yahooaccount.cpp:1685 protocols/yahoo/yahooaccount.cpp:1896 #, no-c-format msgid "Ignore" msgstr "忽略" #: kopete/kopeteeditglobalidentitywidget.cpp:166 #: kopete/kopeteeditglobalidentitywidget.cpp:173 #: kopete/kopeteeditglobalidentitywidget.cpp:217 msgid "Global Photo" msgstr "通用相片" #: kopete/kopeteeditglobalidentitywidget.cpp:173 msgid "Remote photos are not allowed." msgstr "不允許使用遠端的相片。" #: kopete/kopeteeditglobalidentitywidget.cpp:216 msgid "An error occurred when trying to save the global photo." msgstr "儲存通用相片時發生錯誤。" #: kopete/kopeteiface.cpp:160 msgid "" "An external application is attempting to add the '%1' contact '%2' to your " "contact list. Do you want to allow this?" msgstr "" "有外部應用程式試著要將協定 %1 的聯絡人 %2 加入您的聯絡人清單中。您同意嗎?" #: kopete/kopeteiface.cpp:162 msgid "Allow Contact?" msgstr "同意新增聯絡人?" #: kopete/kopeteiface.cpp:162 msgid "Allow" msgstr "同意" #: kopete/kopeteiface.cpp:162 msgid "Reject" msgstr "拒絕" #: kopete/kopeteiface.cpp:175 msgid "" "An external application has attempted to add a contact using the %1 " "protocol, which either does not exist or is not loaded." msgstr "有外部程式試圖加入協定 %1 的聯絡人,但此協定不存在或尚未載入。" #: kopete/kopeteiface.cpp:177 msgid "Missing Protocol" msgstr "找不到協定" #: kopete/kopetewindow.cpp:145 msgid "Global status message" msgstr "通用狀態訊息" #: kopete/kopetewindow.cpp:222 protocols/gadu/gaduprotocol.cpp:59 #: protocols/gadu/ui/gaduawayui.ui:122 protocols/groupwise/gwprotocol.cpp:48 #: protocols/oscar/icq/icqpresence.cpp:71 #, no-c-format msgid "O&ffline" msgstr "離線(&F)" #: kopete/kopetewindow.cpp:226 msgid "&Export Contacts..." msgstr "匯出聯絡人(&E)..." #: kopete/kopetewindow.cpp:240 protocols/groupwise/gwprotocol.cpp:54 #: protocols/oscar/icq/icqpresence.cpp:75 msgid "&Away" msgstr "離開(&A)" #: kopete/kopetewindow.cpp:244 protocols/gadu/ui/gaduawayui.ui:88 #: protocols/groupwise/gwprotocol.cpp:52 #, no-c-format msgid "&Busy" msgstr "忙碌(&B)" #: kopete/kopetewindow.cpp:249 protocols/gadu/ui/gaduawayui.ui:105 #, no-c-format msgid "&Invisible" msgstr "隱形(&I)" #: kopete/kopetewindow.cpp:260 protocols/gadu/gaduprotocol.cpp:71 #: protocols/gadu/gaduprotocol.cpp:73 protocols/groupwise/gwprotocol.cpp:50 #: protocols/yahoo/ui/yahoostealthsetting.ui:61 #, no-c-format msgid "&Online" msgstr "上線(&O)" #: kopete/kopetewindow.cpp:265 msgid "&Set Status" msgstr "設定狀態(&S)" #: kopete/kopetewindow.cpp:283 msgid "Configure Plugins..." msgstr "設定外掛程式..." #: kopete/kopetewindow.cpp:285 msgid "Configure &Global Shortcuts..." msgstr "設定全域快速鍵(&G)..." #: kopete/kopetewindow.cpp:291 msgid "Show Offline &Users" msgstr "顯示離線聯絡人(&U)" #: kopete/kopetewindow.cpp:293 msgid "Show Empty &Groups" msgstr "顯示空白群組(&G)" #: kopete/kopetewindow.cpp:296 msgid "Hide Offline &Users" msgstr "隱藏離線聯絡人(&U)" #: kopete/kopetewindow.cpp:297 msgid "Hide Empty &Groups" msgstr "隱藏空白群組(&G)" #: kopete/kopetewindow.cpp:300 msgid "Se&arch:" msgstr "搜尋(&A):" #: kopete/kopeteui.rc:55 kopete/kopetewindow.cpp:303 #, no-c-format msgid "Quick Search Bar" msgstr "快速搜尋工具列" #: kopete/kopetewindow.cpp:304 plugins/history/historyviewer.ui:89 #, no-c-format msgid "Search:" msgstr "搜尋:" #: kopete/kopetewindow.cpp:307 msgid "Reset Quick Search" msgstr "重設快速搜尋" #: kopete/kopetewindow.cpp:310 msgid "" "Reset Quick Search\n" "Resets the quick search so that all contacts and groups are shown again." msgstr "" "重設快速搜尋\n" "重設搜尋內容以重新顯示所有聯絡人及群組。" #: kopete/kopetewindow.cpp:316 msgid "Edit Global Identity Widget" msgstr "編輯全域身份元件" #: kopete/kopetewindow.cpp:320 msgid "Set Status Message" msgstr "設定狀態訊息" #: kopete/kopetewindow.cpp:330 protocols/groupwise/ui/gwchatpropswidget.ui:284 #, no-c-format msgid "Read Message" msgstr "閱讀訊息" #: kopete/kopetewindow.cpp:330 msgid "Read the next pending message" msgstr "讀取下一個未讀訊息" #: kopete/kopetewindow.cpp:333 msgid "Show/Hide Contact List" msgstr "顯示/隱藏聯絡人清單" #: kopete/kopetewindow.cpp:333 msgid "Show or hide the contact list" msgstr "顯示或隱藏聯絡人清單" #: kopete/kopetewindow.cpp:336 msgid "Set Away/Back" msgstr "設定離開/回來" #: kopete/kopetewindow.cpp:336 msgid "Sets away from keyboard or sets back" msgstr "設定不在電腦前或已經回來了" #: kopete/kopetewindow.cpp:628 msgid "" "Closing the main window will keep Kopete running in the system tray. Use " "'Quit' from the 'File' menu to quit the application." msgstr "" "關閉主視窗後,Kopete 會繼續在系統匣中執行。使用「檔案」選單中的「離開」來" "離開本程式。" #: kopete/kopetewindow.cpp:630 msgid "Docking in System Tray" msgstr "顯示系統匣圖示" #: kopete/kopetewindow.cpp:870 msgid "" "_: Account tooltip information: ICON PROTOCOL: NAME (STATUS)
\n" "
%1: %2 (%5)
" msgstr "" "
%1: %2 (%5)
" #: kopete/kopetewindow.cpp:1000 libkopete/kopeteawayaction.cpp:85 msgid "No Message" msgstr "沒有訊息" #: kopete/main.cpp:30 msgid "Kopete, the TDE Instant Messenger" msgstr "Kopete,TDE 的即時通訊軟體" #: kopete/main.cpp:34 msgid "Do not load plugins. This option overrides all other options." msgstr "不要載入外掛程式,這個選項凌駕所有其他選項。" #: kopete/main.cpp:35 msgid "Disable auto-connection" msgstr "停用自動連線" #: kopete/main.cpp:36 msgid "" "Auto-connect the specified accounts. Use a comma-separated list\n" "to auto-connect multiple accounts." msgstr "自動連線指定的帳號。使用逗點分隔清單來自動連線多個帳號。" #: kopete/main.cpp:38 msgid "" "Do not load the specified plugin. Use a comma-separated list\n" "to disable multiple plugins." msgstr "不要載入指定的外掛程式。使用逗點分隔清單來停用多個外掛程式。" #: kopete/main.cpp:40 msgid "" "Load only the specified plugins. Use a comma-separated list\n" "to load multiple plugins. This option has no effect when\n" "--noplugins is set and overrides all other plugin related\n" "command line options." msgstr "" "只載入指定的外掛程式。使用逗點分隔清單來載入多個外掛程式。\n" "若有 --noplugin 選項凌駕其他相關的外掛程式命令列選項時,這個選項就會無效。" #: kopete/main.cpp:46 msgid "URLs to pass to kopete / emoticon themes to install" msgstr "傳送給 kopete 的網址/要安裝的表情圖示主題" #: kopete/main.cpp:54 #, fuzzy msgid "" "(c) 2009-2010, Timothy Pearson\n" "(c) 2001-2004, Duncan Mac-Vicar Prett\n" "(c) 2002-2005, Kopete Development Team" msgstr "" "(c) 2001-2004, Duncan Mac-Vicar Prett\n" "(c) 2002-2005, Kopete 開發團隊" #: kopete/main.cpp:56 msgid "Developer and Project founder" msgstr "開發人員,專案共同創立者" #: kopete/main.cpp:57 #, fuzzy msgid "Developer, maintainer" msgstr "開發人員,介面維護人員" #: kopete/main.cpp:58 msgid "Developer, Yahoo plugin maintainer" msgstr "開發人員,Yahoo 外掛程式維護人員" #: kopete/main.cpp:59 kopete/main.cpp:65 msgid "Developer" msgstr "開發人員" #: kopete/main.cpp:60 msgid "Developer, Yahoo" msgstr "開發人員,Yahoo" #: kopete/main.cpp:61 msgid "Developer, Connection status plugin author" msgstr "開發人員,連線狀態外掛程式維護人員" #: kopete/main.cpp:62 msgid "Developer, Video device support" msgstr "開發人員,視訊裝置支援" #: kopete/main.cpp:63 msgid "Developer, MSN" msgstr "開發人員,MSN" #: kopete/main.cpp:64 msgid "Developer, Gadu plugin maintainer" msgstr "開發人員,Gadu 外掛程式維護人員" #: kopete/main.cpp:66 msgid "Lead Developer, AIM and ICQ plugin maintainer" msgstr "首席開發人員,AIM 與 ICQ 外掛程式維護人員" #: kopete/main.cpp:67 msgid "IRC plugin maintainer" msgstr "IRC 外掛程式維護人員" #: kopete/main.cpp:68 msgid "Lead Developer" msgstr "首席開發人員" #: kopete/main.cpp:69 msgid "Lead Developer, MSN plugin maintainer" msgstr "首席開發人員,MSN 外掛程式維護人員" #: kopete/main.cpp:70 msgid "Artist / Developer, Artwork maintainer" msgstr "開發人員,介面維護人員" #: kopete/main.cpp:71 msgid "Developer, UI maintainer" msgstr "開發人員,介面維護人員" #: kopete/main.cpp:72 msgid "Developer, Jabber plugin maintainer" msgstr "開發人員,Jabber 外掛程式維護人員" #: kopete/main.cpp:73 msgid "Lead Developer, GroupWise maintainer" msgstr "首席開發人員,GroupWise 維護人員" #: kopete/main.cpp:75 msgid "Konki style author" msgstr "Konki 風格作者" #: kopete/main.cpp:76 msgid "Hacker style author" msgstr "Hacker 風格作者" #: kopete/main.cpp:77 msgid "Kopete's icon author" msgstr "Kopete 的圖示作者" #: kopete/main.cpp:78 msgid "Sounds" msgstr "聲音" #: kopete/main.cpp:79 msgid "Kopete Docugoddess, Bug and Patch Testing." msgstr "Kopete Docugoddess,錯誤與修補測試" #: kopete/main.cpp:80 msgid "Iris Jabber Backend Library" msgstr "Iris Jabber 後端函式庫" #: kopete/main.cpp:81 msgid "OscarSocket author" msgstr "OscarSocket 作者" #: kopete/main.cpp:82 msgid "Kmerlin MSN code" msgstr "Kmerlin 的 MSN 程式碼" #: kopete/main.cpp:83 msgid "Former developer, project co-founder" msgstr "退休開發人員,專案共同創立者" #: kopete/main.cpp:84 kopete/main.cpp:85 kopete/main.cpp:86 kopete/main.cpp:87 #: kopete/main.cpp:90 kopete/main.cpp:93 msgid "Former developer" msgstr "退休開發人員" #: kopete/main.cpp:88 msgid "Misc bugfixes and enhancements" msgstr "其他臭蟲修正及功能增強" #: kopete/main.cpp:89 msgid "Former developer, original Gadu plugin author" msgstr "退休開發人員,原始 Gadu 外掛程式作者" #: kopete/main.cpp:91 msgid "Former developer, Jabber plugin author" msgstr "退休開發人員,Jabber 外掛程式作者" #: kopete/main.cpp:92 msgid "Former developer, Oscar plugin" msgstr "退休開發人員,Oscar 外掛程式" #: kopete/main.cpp:94 msgid "Former developer and WinPopup maintainer" msgstr "退休開發人員及 WinPopup 維護人員" #: kopete/systemtray.cpp:304 msgid "" "
New Message from %1:
\"%2\"" msgstr "來自%1的訊息:
%2
" #: libkopete/connectionmanager.cpp:144 msgid "" "A network connection was disconnected. The application is now in offline " "mode. Do you want the application to resume network operations when the " "network is available again?" msgstr "網路連線已中斷。應用程式目前為離線狀態。您要在網路恢復時恢復連線嗎?" #: libkopete/connectionmanager.cpp:145 msgid "This application is currently in offline mode. Do you want to connect?" msgstr "應用程式目前在離線模式。您要連線嗎?" #: libkopete/connectionmanager.cpp:147 msgid "" "This application is currently in offline mode. Do you want to connect in " "order to carry out this operation?" msgstr "應用程式目前在離線模式。您要連線以執行此命令嗎?" #: libkopete/connectionmanager.cpp:148 msgid "Leave Offline Mode?" msgstr "離開離線模式?" #: libkopete/connectionmanager.cpp:149 #: protocols/jabber/ui/dlgjabberchangepassword.cpp:81 msgid "Connect" msgstr "連線" #: libkopete/connectionmanager.cpp:149 #: protocols/jabber/ui/dlgjabberchangepassword.cpp:81 msgid "Stay Offline" msgstr "保持離線" #: libkopete/knotification.cpp:121 libkopete/knotification.cpp:142 #: protocols/jabber/jabberaccount.cpp:1129 #: protocols/jabber/jabbercontact.cpp:920 msgid "Notification" msgstr "通知" #: libkopete/knotification.cpp:130 libkopete/knotification.cpp:151 msgid "Fatal" msgstr "嚴重" #: libkopete/kopeteaccount.cpp:142 msgid "You have been disconnected" msgstr "您已經斷線了" #: libkopete/kopeteaccount.cpp:142 msgid "You have connected from another client or computer to the account '%1'" msgstr "您已經在另一台電腦使用帳號 %1 連線了。" #: libkopete/kopeteaccount.cpp:142 msgid "" "Most proprietary Instant Messaging services do not allow you to connect from " "more than one location. Check that nobody is using your account without your " "permission. If you need a service that supports connection from various " "locations at the same time, use the Jabber protocol." msgstr "" "大部份即時訊息服務都不允許一個帳號同時在兩處連線。請確認您的帳號沒有別人在使" "用。如果您必須要使用一個可以接受同時由多處連線的即時訊息系統,請改用 Jabber。" #: libkopete/kopeteaccount.cpp:258 libkopete/kopeteaccount.cpp:324 msgid "" "You are not allowed to add yourself to the contact list. The addition of " "\"%1\" to account \"%2\" will not take place." msgstr "您不能將自己加入聯絡人清單中。將 %1 加入帳號 %2 無效。" #: libkopete/kopeteaccount.cpp:258 libkopete/kopeteaccount.cpp:324 msgid "Error Creating Contact" msgstr "建立聯絡人時發生錯誤" #: libkopete/kopeteaccount.cpp:368 protocols/jabber/jabbertransport.cpp:126 msgid "%2 <%1>" msgstr "%2 <%1>" #: libkopete/kopeteaway.cpp:170 msgid "Sorry, I am busy right now" msgstr "抱歉,我現在在忙。" #: libkopete/kopeteaway.cpp:171 libkopete/kopeteaway.cpp:184 msgid "I am gone right now, but I will be back later" msgstr "現在不在,稍後回來。" #: libkopete/kopeteawayaction.cpp:86 msgid "New Message..." msgstr "新的訊息..." #: libkopete/kopeteawayaction.cpp:113 msgid "New Away Message" msgstr "新的離開訊息" #: libkopete/kopeteawayaction.cpp:113 msgid "Please enter your away reason:" msgstr "請輸入離開理由:" #: libkopete/kopeteawaydialog.cpp:37 msgid "Global Away Message" msgstr "通用離開訊息" #: libkopete/kopetechatsession.cpp:251 msgid "Outgoing Message Sent" msgstr "已送出外送訊息" #: libkopete/kopetechatsession.cpp:267 msgid "A contact sent you a buzz/nudge." msgstr "有聯絡人對您送出來電震動。" #: libkopete/kopetechatsession.cpp:451 msgid "" "An error has occurred while creating a new chat window. The chat window " "has not been created." msgstr "產生新的聊天視窗時發生錯誤。此視窗無法建立。" #: libkopete/kopetechatsession.cpp:452 msgid "Error While Creating Chat Window" msgstr "建立聊天視窗時發生錯誤" #: libkopete/kopetecommandhandler.cpp:107 msgid "" "USAGE: /help [] - Used to list available commands, or show help for " "a specified command." msgstr "用法:/help [<命令>] -用來列出可用的命令,或是顯示指定命令的說明。" #: libkopete/kopetecommandhandler.cpp:110 msgid "USAGE: /close - Closes the current view." msgstr "用法:/close -關閉目前畫面。" #: libkopete/kopetecommandhandler.cpp:114 msgid "USAGE: /part - Closes the current view." msgstr "用法:/part -關閉目前畫面。" #: libkopete/kopetecommandhandler.cpp:117 msgid "USAGE: /clear - Clears the active view's chat buffer." msgstr "用法:/clear -關閉作用中畫面的聊天緩衝區。" #: libkopete/kopetecommandhandler.cpp:123 msgid "" "USAGE: /away [] - Marks you as away/back for the current account " "only." msgstr "用法:/away [<理由>] -標示您離開/回來了(僅限目前的帳號)。" #: libkopete/kopetecommandhandler.cpp:126 msgid "USAGE: /awayall [] - Marks you as away/back for all accounts." msgstr "用法:/awayall [<理由>] -標示您離開/回來了(所有帳號)。" #: libkopete/kopetecommandhandler.cpp:129 msgid "" "USAGE: /say - Say text in this chat. This is the same as just typing " "a message, but is very useful for scripts." msgstr "" "用法:/say <文字> -在聊天中發言。這跟直接鍵入訊息一樣,但寫 script 時很有" "用。" #: libkopete/kopetecommandhandler.cpp:133 msgid "" "USAGE: /exec [-o] - Executes the specified command and displays " "the output in the chat buffer. If -o is specified, the output is sent to all " "members of the chat." msgstr "" "用法:/exec [-o] <命令> -執行指定的命令,並將結果顯示在聊天緩衝區中。如果加" "上 -o,結果會傳送給聊天中的所有成員。" #: libkopete/kopetecommandhandler.cpp:236 msgid "Available Commands:\n" msgstr "可用命令:\n" #: libkopete/kopetecommandhandler.cpp:249 msgid "" "\n" "Type /help for more information." msgstr "" "\n" "鍵入 /help <命令> 以獲得更多資訊。" #: libkopete/kopetecommandhandler.cpp:258 msgid "There is no help available for '%1'." msgstr "沒有「%1」的說明。" #: libkopete/kopetecommandhandler.cpp:304 msgid "" "ERROR: Shell access has been restricted on your system. The /exec command " "will not function." msgstr "錯誤:您的系統限制了 shell 的存取。/exec 命令將沒有作用。" #: libkopete/kopetecontact.cpp:212 msgid "&Add to Your Contact List" msgstr "加入您的聯絡人清單(&A)" #: libkopete/kopetecontact.cpp:270 libkopete/kopetecontact.cpp:318 msgid "Move Contact" msgstr "移動聯絡人" #: libkopete/kopetecontact.cpp:276 msgid "Select the meta contact to which you want to move this contact:" msgstr "選擇您要將此聯絡人移到哪個整合聯絡人:" #: libkopete/kopetecontact.cpp:279 msgid "Create a new metacontact for this contact" msgstr "為此聯絡人建立新的整合聯絡人" #: libkopete/kopetecontact.cpp:280 msgid "" "If you select this option, a new metacontact will be created in the top-" "level group with the name of this contact and the contact will be moved to " "it." msgstr "選取此選項的話,會在頂層建立一個新的整合聯絡人群組,並將該聯絡人移入。" #: libkopete/kopetecontact.cpp:315 msgid "" "You are moving the contact `%1' to the meta contact `%2'.\n" "`%3' will be empty afterwards. Do you want to delete this contact?" msgstr "" "您正將聯絡人 %1 移入整合聯絡人 %2。\n" "%3 之後會變空。您要刪除此聯絡人嗎?" #: libkopete/kopetecontact.cpp:318 msgid "&Keep" msgstr "保留(&K)" #: libkopete/kopetecontact.cpp:452 msgid "" "This user is not reachable at the moment. Please try a protocol that " "supports offline sending, or wait until this user comes online." msgstr "" "目前無法聯繫此使用者。請確認您使用支援離線傳送訊息的協定,或是等待該使用者上" "線。" #: libkopete/kopetecontact.cpp:453 libkopete/kopetemetacontact.cpp:346 #: libkopete/kopetemetacontact.cpp:364 libkopete/kopetemetacontact.cpp:440 msgid "User is Not Reachable" msgstr "無法聯繫使用者" #: libkopete/kopetecontact.cpp:460 msgid "" "Are you sure you want to remove the contact '%1' from your contact list?" msgstr "您確定要從聯絡人清單中移除聯絡人「%1」嗎?" #: libkopete/kopetecontact.cpp:658 msgid "" "_: DISPLAY NAME
 CONTACT STATUS\n" "%3
 %1" msgstr "%3
 %1" #: libkopete/kopetecontact.cpp:665 msgid "" "_: DISPLAY NAME (CONTACT ID)
 CONTACT STATUS\n" "%4 (%3)
 %1" msgstr "%4 (%3)
 %1" #: libkopete/kopetecontact.cpp:682 msgid "" "_:
Full Name: FORMATTED NAME\n" "
Full Name: %1" msgstr "
完整名稱: %1" #: libkopete/kopetecontact.cpp:691 msgid "" "_:
Idle: FORMATTED IDLE TIME\n" "
Idle: %1" msgstr "
閒置: %1" #: libkopete/kopetecontact.cpp:700 msgid "" "_:
Home Page: FORMATTED URL\n" "
Home Page: %2" msgstr "
個人首頁: %2" #: libkopete/kopetecontact.cpp:710 #, c-format msgid "" "_:
Away Message: FORMATTED AWAY MESSAGE\n" "
Away Message: %1" msgstr "
離開訊息: %1" #: libkopete/kopetecontact.cpp:747 msgid "" "_:
PROPERTY LABEL: PROPERTY VALUE\n" "
%2: %1" msgstr "
%2: %1" #: libkopete/kopetecontact.cpp:770 msgid "" "_: firstName lastName\n" "%2 %1" msgstr "%2 %1" #: libkopete/kopetecontact.cpp:806 msgid "" "_: d h m s\n" "%4d %3h %2m %1s" msgstr "%4 天 %3 小時 %2 分 %1 秒" #: libkopete/kopetecontact.cpp:814 msgid "" "_: h m s\n" "%3h %2m %1s" msgstr "%3 小時 %2 分 %1 秒" #: libkopete/kopetecontact.cpp:821 #, c-format msgid "" "_: m s\n" "%2m %1s" msgstr "%2 分 %1 秒" #: libkopete/kopeteglobal.cpp:112 protocols/irc/ircprotocol.cpp:160 msgid "Full Name" msgstr "完整名稱" #: libkopete/kopeteglobal.cpp:118 msgid "Idle Time" msgstr "閒置時間" #: libkopete/kopeteglobal.cpp:124 msgid "Online Since" msgstr "上線時間" #: libkopete/kopeteglobal.cpp:130 msgid "Last Seen" msgstr "上次上線" #: libkopete/kopeteglobal.cpp:136 msgid "Away Message" msgstr "離開訊息" #: libkopete/kopeteglobal.cpp:142 protocols/groupwise/ui/gwcontactsearch.ui:278 #: protocols/jabber/ui/dlgbrowse.ui:64 #: protocols/oscar/icq/ui/icqsearchbase.ui:383 #, no-c-format msgid "First Name" msgstr "名字" #: libkopete/kopeteglobal.cpp:148 protocols/groupwise/ui/gwcontactsearch.ui:289 #: protocols/jabber/ui/dlgbrowse.ui:69 #: protocols/oscar/icq/ui/icqsearchbase.ui:394 #, no-c-format msgid "Last Name" msgstr "姓氏" #: libkopete/kopeteglobal.cpp:154 msgid "Private Phone" msgstr "私人電話" #: libkopete/kopeteglobal.cpp:160 msgid "Private Mobile Phone" msgstr "私人行動電話" #: libkopete/kopeteglobal.cpp:166 msgid "Work Phone" msgstr "工作電話" #: libkopete/kopeteglobal.cpp:172 msgid "Work Mobile Phone" msgstr "工作行動電話" #: libkopete/kopeteglobal.cpp:178 #: protocols/groupwise/ui/gwcontactproperties.cpp:116 msgid "Email Address" msgstr "電子郵件地址" #: libkopete/kopeteglobal.cpp:184 protocols/gadu/ui/gadusearch.ui:439 #, no-c-format msgid "Nick Name" msgstr "暱稱" #: kopete/contactlist/kopetemetalvipropswidget.ui:264 #: libkopete/kopeteglobal.cpp:190 #: libkopete/ui/addressbookselectorwidget_base.ui:77 #: protocols/jabber/ui/dlgvcard.ui:326 #, no-c-format msgid "Photo" msgstr "相片" #: libkopete/kopeteglobal.cpp:232 msgid "Could not find suitable place to install emoticon themes into." msgstr "找不到合適的地方安裝表情圖示主題。" #: libkopete/kopeteglobal.cpp:238 msgid "Installing Emoticon Themes..." msgstr "安裝新的表情圖示主題..." #: libkopete/kopeteglobal.cpp:260 msgid "Could not open \"%1\" for unpacking." msgstr "無法解開「%1」。" #: libkopete/kopeteglobal.cpp:285 msgid "The file \"%1\" is not a valid emoticon theme archive." msgstr "檔案「%1」不是個有效的表情圖示主題壓縮文件。" #: libkopete/kopeteglobal.cpp:296 msgid "Installing %1 emoticon theme" msgstr "正在安裝 %1 表情圖示主題" #: libkopete/kopeteglobal.cpp:334 msgid "" "A problem occurred during the installation process. However, some of the " "emoticon themes in the archive may have been installed." msgstr "安裝程序中出現錯誤。不過,有些表情圖示可能已安裝。" #: libkopete/kopetegroup.cpp:55 msgid "Not in your contact list" msgstr "不在您的聯絡人清單" #: libkopete/kopetegroup.cpp:217 msgid "(Unnamed Group)" msgstr "(未命名群組)" #: libkopete/kopetemetacontact.cpp:345 libkopete/kopetemetacontact.cpp:363 #: libkopete/kopetemetacontact.cpp:439 msgid "" "This user is not reachable at the moment. Please make sure you are connected " "and using a protocol that supports offline sending, or wait until this user " "comes online." msgstr "" "目前無法聯繫此使用者。請確認您已連線,並且是使用支援離線傳送訊息的協定,或是" "等待該使用者上線。" #: libkopete/kopetemetacontact.cpp:503 libkopete/kopeteonlinestatus.cpp:110 #: plugins/statistics/statisticscontact.cpp:362 #: plugins/statistics/statisticsdialog.cpp:340 #: protocols/gadu/gaduprotocol.cpp:71 protocols/gadu/gaduprotocol.cpp:73 #: protocols/groupwise/gwprotocol.cpp:50 protocols/irc/ircprotocol.cpp:111 #: protocols/irc/ircprotocol.cpp:116 protocols/irc/ircprotocol.cpp:139 #: protocols/jabber/jabbercontact.cpp:156 #: protocols/jabber/jabberprotocol.cpp:75 #: protocols/meanwhile/meanwhileprotocol.cpp:42 #: protocols/oscar/icq/icqpresence.cpp:77 protocols/sms/smsprotocol.cpp:37 #: protocols/winpopup/wpprotocol.cpp:53 protocols/yahoo/yahooprotocol.cpp:43 msgid "Online" msgstr "上線" #: libkopete/kopetemetacontact.cpp:505 libkopete/kopeteonlinestatus.cpp:113 #: plugins/statistics/statisticscontact.cpp:363 #: plugins/statistics/statisticsdialog.cpp:345 #: protocols/groupwise/gwprotocol.cpp:54 protocols/irc/ircprotocol.cpp:124 #: protocols/irc/ircprotocol.cpp:130 protocols/irc/ircprotocol.cpp:136 #: protocols/irc/ircprotocol.cpp:143 protocols/jabber/jabbercontact.cpp:160 #: protocols/jabber/jabberprotocol.cpp:76 #: protocols/meanwhile/meanwhileprotocol.cpp:46 #: protocols/oscar/icq/icqpresence.cpp:75 protocols/winpopup/wpprotocol.cpp:54 msgid "Away" msgstr "離開" #: libkopete/kopetemetacontact.cpp:507 libkopete/kopeteonlinestatus.cpp:122 #: plugins/statistics/statisticscontact.cpp:364 #: plugins/statistics/statisticsdialog.cpp:350 #: protocols/gadu/gaduprotocol.cpp:59 protocols/gadu/gaduprotocol.cpp:61 #: protocols/groupwise/gwprotocol.cpp:48 protocols/irc/ircprotocol.cpp:113 #: protocols/irc/ircprotocol.cpp:118 protocols/irc/ircprotocol.cpp:147 #: protocols/jabber/jabberprotocol.cpp:79 #: protocols/meanwhile/meanwhileprotocol.cpp:37 #: protocols/oscar/icq/icqpresence.cpp:71 protocols/sms/smsprotocol.cpp:39 #: protocols/winpopup/wpprotocol.cpp:55 protocols/yahoo/yahooprotocol.cpp:42 msgid "Offline" msgstr "離線" #: libkopete/kopetemetacontact.cpp:510 protocols/irc/ircprotocol.cpp:150 msgid "Status not available" msgstr "狀態無法取得" #: libkopete/kopetemimetypehandler.cpp:153 #, c-format msgid "Unable to find the file %1." msgstr "無法找到檔案 %1。" #: libkopete/kopetemimetypehandler.cpp:157 msgid "" "Unable to download the requested file;
please check that address %1 " "is correct.
" msgstr "無法下載要求的檔案。
請檢查位址 %1 是否正確。
" #: libkopete/kopeteonlinestatus.cpp:116 protocols/gadu/gaduprotocol.cpp:75 #: protocols/groupwise/gwprotocol.cpp:66 protocols/irc/ircprotocol.cpp:145 #: protocols/jabber/jabberprotocol.cpp:81 protocols/sms/smsprotocol.cpp:38 #: protocols/yahoo/yahooprotocol.cpp:56 msgid "Connecting" msgstr "連線中" #: libkopete/kopeteonlinestatus.cpp:119 protocols/gadu/gaduprotocol.cpp:67 #: protocols/gadu/gaduprotocol.cpp:69 protocols/jabber/jabbercontact.cpp:166 #: protocols/jabber/jabberprotocol.cpp:80 protocols/yahoo/yahooprotocol.cpp:53 msgid "Invisible" msgstr "隱身" #: libkopete/kopeteonlinestatus.cpp:126 plugins/cryptography/kgpgselkey.cpp:89 #: plugins/translator/translatorlanguages.cpp:35 #: protocols/groupwise/gwprotocol.cpp:62 protocols/irc/ircaccount.cpp:270 #: protocols/oscar/icq/icqpresence.cpp:131 msgid "Unknown" msgstr "未知" #: libkopete/kopetepassword.cpp:181 msgid "Password Required" msgstr "需要密碼" #: libkopete/kopetepassword.cpp:293 msgid "" "Kopete is unable to save your password securely in your wallet;
do " "you want to save the password in the unsafe configuration file " "instead?
" msgstr "" "Kopete 無法在您的錢包中安全儲存您的密碼。
您要將密碼儲存在(不安全" "的)設定檔中嗎?
" #: libkopete/kopetepassword.cpp:295 msgid "Unable to Store Secure Password" msgstr "無法安全儲存密碼" #: libkopete/kopetepassword.cpp:296 msgid "Store &Unsafe" msgstr "儲存(&U)" #: libkopete/kopetepasswordedaccount.cpp:83 msgid "" "The password was wrong; please re-enter your password for %1 account " "%2" msgstr "密碼錯了;請重新輸入 %1 帳號 %2 的密碼。" #: libkopete/kopetepasswordedaccount.cpp:85 msgid "Please enter your password for %1 account %2" msgstr "請輸入您的 %1 帳號 %2 的密碼" #: libkopete/kopeteprotocol.cpp:61 protocols/meanwhile/meanwhileprotocol.cpp:60 msgid "Account Offline" msgstr "帳號已離線" #: libkopete/kopetetask.cpp:32 msgid "The operation has not finished yet" msgstr "操作尚未完成" #: libkopete/kopetetask.cpp:67 msgid "Aborted" msgstr "中止" #: libkopete/kopetetransfermanager.cpp:190 msgid "" msgstr "<未知>" #: libkopete/kopetetransfermanager.cpp:237 protocols/gadu/gaducontact.cpp:99 #: protocols/irc/ircusercontact.cpp:150 protocols/jabber/jabbercontact.cpp:1018 #: protocols/jabber/jabbergroupcontact.cpp:299 #: protocols/jabber/jabbergroupmembercontact.cpp:153 msgid "Kopete File Transfer" msgstr "Kopete 檔案傳輸" #: libkopete/kopetetransfermanager.cpp:258 msgid "" "Sorry, sending files which are not stored locally is not yet supported by " "this protocol.\n" "Please copy this file to your computer and try again." msgstr "" "抱歉,目前此協定尚未支援傳送非本地端檔案。\n" "請先將檔案複製到您的電腦中再嚐試。" #: libkopete/kopeteutils.cpp:38 msgid "You have been disconnected." msgstr "您已經斷線了。" #: libkopete/kopeteutils.cpp:39 msgid "Connection Lost." msgstr "連線已中斷。" #: libkopete/kopeteutils.cpp:40 msgid "" "Kopete lost the channel used to talk to the instant messaging system.\n" "This can be because either your internet access went down, the service is " "experiencing problems, or the service disconnected you because you tried to " "connect with the same account from another location. Try connecting again " "later." msgstr "" "Kopete 失去了與此即時訊息系統溝通的頻道。這有可能是因為您的網路連線已中斷,服" "務遇到問題,或是另外有人使用此帳號連線到此服務。請稍候再試。" #: libkopete/kopeteutils.cpp:42 msgid "Can't connect with the instant messaging server or peers." msgstr "無法連線到此即時訊息伺服器。" #: libkopete/kopeteutils.cpp:43 msgid "Can't connect." msgstr "無法連線。" #: libkopete/kopeteutils.cpp:44 msgid "" "This means Kopete can't reach the instant messaging server or peers.\n" "This can be because either your internet access is down or the server is " "experiencing problems. Try connecting again later." msgstr "" "這表示 Kopete 無法連線到此即時訊息伺服器。\n" "這有可能是因為您的網路連線已中斷或是服務遇到問題。請稍候再試。" #: libkopete/kopeteutils.cpp:55 msgid "More Information..." msgstr "更多資訊..." #: libkopete/private/kopetecommand.cpp:64 msgid "Enter Arguments" msgstr "輸入參數" #: libkopete/private/kopetecommand.cpp:64 msgid "Enter the arguments to %1:" msgstr "輸入給 %1 的參數" #: libkopete/private/kopetecommand.cpp:77 msgid "Alias \"%1\" expands to itself." msgstr "別名 %1 會擴充為自己。" #: libkopete/private/kopetecommand.cpp:82 msgid "" "_n: \"%1\" requires at least %n argument.\n" "\"%1\" requires at least %n arguments." msgstr "%1 至少需要 %n 個參數。" #: libkopete/private/kopetecommand.cpp:88 msgid "" "_n: \"%1\" has a maximum of %n argument.\n" "\"%1\" has a maximum of %n arguments." msgstr "%1 最多只能有 %n 個參數。" #: libkopete/private/kopetecommand.cpp:93 msgid "You are not authorized to perform the command \"%1\"." msgstr "您不被允許執行此命令 %1。" #: libkopete/private/kopetecommand.cpp:132 msgid "Command Error" msgstr "命令錯誤" #: libkopete/private/kopeteviewmanager.cpp:225 msgid "Incoming message from %1
\"%2\"
" msgstr "從 %1 來的訊息:
%2
" #: libkopete/private/kopeteviewmanager.cpp:234 msgid "A highlighted message arrived from %1
\"%2\"
" msgstr "從 %1 來的高亮度訊息:
%2
" #: libkopete/tdeabcpersistence.cpp:294 msgid "\"%1\" is not supported by Kopete." msgstr " Kopete 不支援「%1」。" #: libkopete/tdeabcpersistence.cpp:295 msgid "Could Not Sync with TDE Address Book" msgstr "無法與 TDE 通訊錄同步" #: libkopete/tdeabcpersistence.cpp:342 msgid "" "An address was added to this contact by another application.
Would " "you like to use it in Kopete?
Protocol: %1
Address: %2" msgstr "" "有另一個應用程式對這個聯絡人新增了一個地址。
您要在 Kopete 使用嗎?" "
協定:%1
地址:%2
" #: libkopete/tdeabcpersistence.cpp:342 msgid "Import Address From Address Book" msgstr "從通訊錄匯入地址" #: libkopete/tdeabcpersistence.cpp:342 msgid "Use" msgstr "使用" #: libkopete/tdeabcpersistence.cpp:342 #: protocols/gadu/ui/gadueditaccountui.ui:304 #, no-c-format msgid "Do Not Use" msgstr "不使用" #: libkopete/tdeabcpersistence.cpp:356 msgid "" "One or more of your accounts using %1 are offline. Most systems have to " "be connected to add contacts. Please connect these accounts and try again." msgstr "" "您使用的帳號 %1 在離線模式。大部份的系統都要先連線才能新增聯絡人。請先連" "線後再嚐試。" #: libkopete/tdeabcpersistence.cpp:357 protocols/gadu/gadusession.cpp:217 #: protocols/gadu/gadusession.cpp:230 protocols/gadu/gadusession.cpp:242 #: protocols/gadu/gadusession.cpp:275 protocols/gadu/gadusession.cpp:289 #: protocols/gadu/gadusession.cpp:307 protocols/irc/ui/channellist.cpp:304 msgid "Not Connected" msgstr "未連線" #: libkopete/tdeabcpersistence.cpp:367 protocols/oscar/icq/icqprotocol.cpp:119 msgid "Choose Account" msgstr "選擇帳號" #: libkopete/tdeabcpersistence.cpp:381 msgid "" "You do not have an account configured for %1 yet. Please create " "an account, connect it, and try again." msgstr "" "您沒有建立帳號,無法設定 %1。請先建立帳號,連線後再嚐試。" #: libkopete/tdeabcpersistence.cpp:382 msgid "No Account Found" msgstr "找不到帳號" #: libkopete/tdeabcpersistence.cpp:398 msgid "It was not possible to add the contact." msgstr "無法新增聯絡人。" #: libkopete/tdeabcpersistence.cpp:399 msgid "Could Not Add Contact" msgstr "無法新增聯絡人" #: libkopete/tests/kopetepasswordtest_program.cpp:35 msgid "Config group to store password in" msgstr "設定儲存密碼的群組" #: libkopete/tests/kopetepasswordtest_program.cpp:36 msgid "Set password to new" msgstr "設定新密碼" #: libkopete/tests/kopetepasswordtest_program.cpp:37 msgid "Claim password was erroneous" msgstr "宣告密碼不正確" #: libkopete/tests/kopetepasswordtest_program.cpp:38 msgid "Password prompt" msgstr "密碼提示" #: libkopete/tests/kopetepasswordtest_program.cpp:39 msgid "Image to display in password dialog" msgstr "在密碼對話框中顯示的影像" #: libkopete/tests/kopetepasswordtest_program.cpp:120 msgid "" "Hopefully this popped up because you set the password to the empty string." msgstr "希望這會跳出來,因為您將密碼設為空字串。" #: libkopete/ui/addressbooklinkwidget.cpp:77 msgid "Choose the corresponding entry for '%1'" msgstr "選擇 %1 的通訊錄項目。" #: libkopete/ui/addressbooklinkwidget.cpp:79 msgid "Choose the corresponding entry in the address book" msgstr "在您的通訊錄中選擇對應的項目" #: libkopete/ui/addressbookselectorwidget.cpp:77 #: libkopete/ui/addressbookselectorwidget_base.ui:99 #: plugins/cryptography/popuppublic.cpp:128 protocols/jabber/ui/dlgbrowse.ui:79 #: protocols/oscar/icq/ui/icqsearchbase.ui:405 #, no-c-format msgid "Email" msgstr "電子郵件" #: libkopete/ui/addressbookselectorwidget.cpp:147 msgid "New Address Book Entry" msgstr "新的通訊錄項目" #: libkopete/ui/addressbookselectorwidget.cpp:147 msgid "Name the new entry:" msgstr "命名新的項目:" #: libkopete/ui/contactaddednotifydialog.cpp:62 msgid "Someone Has Added You" msgstr "有人將您加入聯絡人清單" #: libkopete/ui/contactaddednotifydialog.cpp:73 msgid "" " The contact %2 has added " "you to his/her contactlist. (Account %3)" msgstr "" "聯絡人 %2 已將您加入他的聯絡" "人清單中(帳號 %3)" #: libkopete/ui/fileconfirmbase.ui:16 #: libkopete/ui/kopetefileconfirmdialog.cpp:35 #, no-c-format msgid "A User Would Like to Send You a File" msgstr "有聯絡人想傳送檔案給您" #: libkopete/ui/kopetefileconfirmdialog.cpp:36 msgid "&Refuse" msgstr "拒絕(&R)" #: libkopete/ui/kopetefileconfirmdialog.cpp:36 msgid "&Accept" msgstr "接受(&A)" #: libkopete/ui/kopetefileconfirmdialog.cpp:64 msgid "File Transfer" msgstr "檔案傳輸" #: libkopete/ui/kopetefileconfirmdialog.cpp:86 msgid "" "The file '%1' already exists.\n" "Do you want to overwrite it ?" msgstr "檔案 %1 已存在。您確定要覆寫嗎?" #: libkopete/ui/kopetefileconfirmdialog.cpp:87 msgid "Overwrite File" msgstr "覆寫檔案" #: libkopete/ui/kopetefileconfirmdialog.cpp:96 msgid "You must provide a valid local filename" msgstr "您必須提供合法的本地檔案名稱" #: libkopete/ui/kopetestdaction.cpp:43 msgid "&Configure Kopete..." msgstr "設定 Kopete(&C)..." #: libkopete/ui/kopetestdaction.cpp:73 msgid "Start &Chat..." msgstr "開始聊天(&C)..." #: libkopete/ui/kopetestdaction.cpp:78 msgid "&Send Single Message..." msgstr "傳送單一訊息(&S)..." #: libkopete/ui/kopetestdaction.cpp:83 msgid "User &Info" msgstr "使用者資訊(&I)" #: libkopete/ui/kopetestdaction.cpp:88 msgid "Send &File..." msgstr "傳送檔案(&F)..." #: libkopete/ui/kopetestdaction.cpp:93 msgid "View &History..." msgstr "檢視歷史記錄(&H)..." #: libkopete/ui/kopetestdaction.cpp:98 msgid "&Create Group..." msgstr "建立新群組(&C)..." #: libkopete/ui/kopetestdaction.cpp:103 msgid "Cha&nge Meta Contact..." msgstr "變更整合聯絡人(&N)..." #: libkopete/ui/kopetestdaction.cpp:108 msgid "&Delete Contact" msgstr "刪除聯絡人(&D)" #: libkopete/ui/kopetestdaction.cpp:113 msgid "Change A&lias..." msgstr "變更別名(&L)..." #: libkopete/ui/kopetestdaction.cpp:118 msgid "&Block Contact" msgstr "封鎖聯絡人(&B)" #: libkopete/ui/kopetestdaction.cpp:123 msgid "Un&block Contact" msgstr "解除封鎖聯絡人(&B)" #: libkopete/ui/userinfodialog.cpp:62 protocols/winpopup/wpuserinfo.cpp:41 #, c-format msgid "User Info for %1" msgstr "%1 的使用者資訊" #: libkopete/ui/userinfodialog.cpp:209 #: protocols/gadu/ui/gadueditaccountui.ui:435 #: protocols/gadu/ui/gadusearch.ui:88 #: protocols/oscar/icq/ui/icqworkinfowidget.ui:112 #: protocols/yahoo/ui/yahooworkinfowidget.ui:72 #, no-c-format msgid "Name:" msgstr "名稱:" #: libkopete/ui/userinfodialog.cpp:213 msgid "Contact ID:" msgstr "聯絡人 ID:" #: libkopete/ui/userinfodialog.cpp:217 #: protocols/groupwise/ui/gwcontactpropswidget.ui:76 #, no-c-format msgid "Status:" msgstr "狀態:" #: libkopete/ui/userinfodialog.cpp:221 msgid "Warning level:" msgstr "警告等級:" #: libkopete/ui/userinfodialog.cpp:225 msgid "Online since:" msgstr "上線時間:" #: libkopete/ui/userinfodialog.cpp:229 #: protocols/oscar/icq/ui/icqworkinfowidget.ui:128 #: protocols/yahoo/ui/yahooworkinfowidget.ui:133 #, no-c-format msgid "Address:" msgstr "地址:" #: libkopete/ui/userinfodialog.cpp:233 #: protocols/oscar/icq/ui/icqworkinfowidget.ui:35 #: protocols/yahoo/ui/yahooworkinfowidget.ui:35 #, no-c-format msgid "Phone:" msgstr "電話:" #: libkopete/ui/userinfodialog.cpp:238 msgid "Away message:" msgstr "離開訊息:" #: libkopete/ui/userinfodialog.cpp:246 msgid "User info:" msgstr "使用者資訊:" #: plugins/alias/aliaspreferences.cpp:326 #: plugins/autoreplace/autoreplaceprefs.ui:108 #: protocols/groupwise/ui/gwcustomstatuswidget.ui:68 #: protocols/oscar/oscarlistnonservercontacts.cpp:33 #, no-c-format msgid "&Add" msgstr "加入(&A)" #: plugins/alias/aliaspreferences.cpp:336 #: plugins/alias/aliaspreferences.cpp:425 msgid "" "Could not add alias %1. An alias name cannot contain the " "characters \"_\" or \"=\"." msgstr "無法加入別名%1。別名不能包含字元 _ 或 =。" #: plugins/alias/aliaspreferences.cpp:338 #: plugins/alias/aliaspreferences.cpp:427 msgid "Invalid Alias Name" msgstr "無效的別名" #: plugins/alias/aliaspreferences.cpp:354 #: plugins/alias/aliaspreferences.cpp:450 msgid "" "Could not add alias %1. This command is already being handled by " "either another alias or Kopete itself." msgstr "" "無法新增別名%1。這個命令已經被另一個別名或是 Kopete 自己處理了。" #: plugins/alias/aliaspreferences.cpp:356 #: plugins/alias/aliaspreferences.cpp:452 msgid "Could Not Add Alias" msgstr "無法新增別名" #: plugins/alias/aliaspreferences.cpp:469 msgid "Are you sure you want to delete the selected aliases?" msgstr "您確定要刪除選取的別名嗎?" #: plugins/alias/aliaspreferences.cpp:469 msgid "Delete Aliases" msgstr "刪除別名" #: plugins/autoreplace/autoreplaceconfig.cpp:67 msgid "" "_: list_of_words_to_replace\n" "ur,your,r,are,u,you,theres,there is,arent,are not,dont,do not" msgstr "ur,your,r,are,u,you,theres,there is,arent,are not,dont,do not" #: plugins/autoreplace/autoreplacepreferences.cpp:46 msgid "Text" msgstr "文字" #: plugins/autoreplace/autoreplacepreferences.cpp:47 msgid "Replacement" msgstr "取代" #: plugins/contactnotes/contactnotesedit.cpp:29 msgid "Contact Notes" msgstr "聯絡人備忘錄" #: plugins/contactnotes/contactnotesedit.cpp:36 msgid "Notes about %1:" msgstr "%1 的備忘錄" #: plugins/contactnotes/contactnotesplugin.cpp:40 msgid "&Notes" msgstr "備忘錄(&N)" #: plugins/cryptography/cryptographyguiclient.cpp:51 msgid "Encrypt Messages" msgstr "加密訊息" #: plugins/cryptography/cryptographyplugin.cpp:51 msgid "Cryptography" msgstr "加密" #: plugins/cryptography/cryptographyplugin.cpp:71 msgid "&Select Cryptography Public Key..." msgstr "選擇加密公開金鑰(&S)..." #: plugins/cryptography/cryptographyplugin.cpp:188 msgid "Outgoing Encrypted Message: " msgstr "外送加密訊息:" #: plugins/cryptography/cryptographyplugin.cpp:219 msgid "Incoming Encrypted Message: " msgstr "接收加密訊息:" #: plugins/cryptography/cryptographyselectuserkey.cpp:29 msgid "Select Contact's Public Key" msgstr "選擇聯絡人的公開金鑰" #: plugins/cryptography/cryptographyselectuserkey.cpp:38 #, c-format msgid "Select public key for %1" msgstr "選擇 %1 的公開金鑰" #: plugins/cryptography/kgpginterface.cpp:99 msgid "Enter passphrase for %1:" msgstr "輸入%1的密碼片語:" #: plugins/cryptography/kgpginterface.cpp:101 msgid "Bad passphrase
You have %1 tries left.
" msgstr "錯誤的密碼片語
您還能再試 %1 次。
" #: plugins/cryptography/kgpgselkey.cpp:41 msgid "Private Key List" msgstr "私密金鑰清單" #: kopete/addaccountwizard/addaccountwizardpage1.ui:72 #: libkopete/ui/addressbookselectorwidget_base.ui:88 #: plugins/cryptography/kgpgselkey.cpp:53 #: plugins/cryptography/popuppublic.cpp:127 protocols/gadu/ui/gadusearch.ui:428 #: protocols/groupwise/ui/gwcustomstatuswidget.ui:25 #: protocols/jabber/ui/dlgservices.ui:100 #, no-c-format msgid "Name" msgstr "名稱" #: plugins/cryptography/kgpgselkey.cpp:57 msgid "Choose secret key:" msgstr "選擇私鑰:" #: plugins/cryptography/kgpgselkey.cpp:64 msgid "Local signature (cannot be exported)" msgstr "本地端簽章(不能匯出)" #: plugins/cryptography/kgpgselkey.cpp:84 #: plugins/cryptography/popuppublic.cpp:401 msgid "Unlimited" msgstr "沒有限制" #: plugins/cryptography/kgpgselkey.cpp:92 msgid "Invalid" msgstr "不合法" #: plugins/cryptography/kgpgselkey.cpp:95 msgid "Disabled" msgstr "關閉" #: plugins/cryptography/kgpgselkey.cpp:98 msgid "Revoked" msgstr "銷毀" #: plugins/cryptography/kgpgselkey.cpp:101 msgid "Expired" msgstr "已過期" #: plugins/cryptography/kgpgselkey.cpp:104 msgid "Undefined" msgstr "未定義" #: plugins/cryptography/kgpgselkey.cpp:107 msgid "None" msgstr "無" #: plugins/cryptography/kgpgselkey.cpp:110 msgid "Marginal" msgstr "最低限度的" #: plugins/cryptography/kgpgselkey.cpp:113 msgid "Full" msgstr "完全" #: plugins/cryptography/kgpgselkey.cpp:116 msgid "Ultimate" msgstr "絕對信任" #: plugins/cryptography/kgpgselkey.cpp:119 msgid "?" msgstr "?" #: plugins/cryptography/kgpgselkey.cpp:150 msgid "ID: %1, trust: %2, expiration: %3" msgstr "ID:%1,信任:%2,逾時:%3" #: plugins/cryptography/popuppublic.cpp:94 msgid "Select Public Key" msgstr "選擇公開金鑰" #: plugins/cryptography/popuppublic.cpp:111 #, c-format msgid "Select Public Key for %1" msgstr "選擇 %1 的公開金鑰" #: plugins/cryptography/popuppublic.cpp:119 msgid "Clear Search" msgstr "清除搜尋" #: plugins/cryptography/popuppublic.cpp:122 msgid "Search: " msgstr "搜尋:" #: plugins/cryptography/popuppublic.cpp:129 msgid "ID" msgstr "ID" #: plugins/cryptography/popuppublic.cpp:147 msgid "&Go to Default Key" msgstr "移至預設金鑰(&G)" #: plugins/cryptography/popuppublic.cpp:150 msgid "ASCII armored encryption" msgstr "ASCII 裝甲加密" #: plugins/cryptography/popuppublic.cpp:151 msgid "Allow encryption with untrusted keys" msgstr "允許以不信任的金鑰加密" #: plugins/cryptography/popuppublic.cpp:152 msgid "Hide user id" msgstr "隱藏使用者代號" #: plugins/cryptography/popuppublic.cpp:155 msgid "" "Public keys list: select the key that will be used for encryption." msgstr "公開金鑰清單:選擇要用來加密的金鑰。" #: plugins/cryptography/popuppublic.cpp:157 msgid "" "ASCII encryption: makes it possible to open the encrypted file/" "message in a text editor" msgstr "ASCII 加密:讓您可以在文字編輯器中開啟加密的檔案/訊息" #: plugins/cryptography/popuppublic.cpp:159 msgid "" "Hide user ID: Do not put the keyid into encrypted packets. This " "option hides the receiver of the message and is a countermeasure against " "traffic analysis. It may slow down the decryption process because all " "available secret keys are tried." msgstr "" "隱藏使用者代號:不要將 keyid 放入加密封包。這個選項會隱藏這封郵件的收" "件者,這是一種反制傳輸分析的手段。它可能會拖慢解密程序的速度,因為所有可用的" "私密金鑰都會被試過。" #: plugins/cryptography/popuppublic.cpp:163 msgid "" "Allow encryption with untrusted keys: when you import a public key, " "it is usually marked as untrusted and you cannot use it unless you sign it " "in order to make it 'trusted'. Checking this box enables you to use any key, " "even if it has not be signed." msgstr "" "允許以不信任的金鑰加密:當您匯入公鑰時,它通常會標記為不信任的,除非您" "為了讓它變成「信任的」而簽署它,否則您不能使用它。核取此方塊讓您可以使用任何" "金鑰,即使它尚未被簽署。" #: plugins/cryptography/popuppublic.cpp:172 msgid "Shred source file" msgstr "撕碎來源檔案" #: plugins/cryptography/popuppublic.cpp:174 msgid "" "Shred source file: permanently remove source file. No recovery will " "be possible" msgstr "撕碎來源檔案:永久移除來源檔案。將不可能恢復。" #: plugins/cryptography/popuppublic.cpp:176 msgid "" "Shred source file:

Checking this option will shred " "(overwrite several times before erasing) the files you have encrypted. This " "way, it is almost impossible that the source file is recovered.

But " "you must be aware that this is not secure on all file systems, and that " "parts of the file may have been saved in a temporary file or in the spooler " "of your printer if you previously opened it in an editor or tried to print " "it. Only works on files (not on folders).

" msgstr "" "撕碎原始檔案:

勾選此選項會撕碎(在消除前複寫多次)您剛剛" "加密的檔案。這樣一來,此原始檔案幾乎不可能被復原。

但是您必須了解這" "並非在所有檔案系統都是安全的,而檔案的某些部分個可能在您先前在編輯器中開" "啟它或嘗試列印它時,被儲存在暫存的檔案中或者在您印表機的排程器裡。這只對檔案" "有效(不適用於資料夾)。" #: plugins/cryptography/popuppublic.cpp:177 msgid "Read this before using shredding" msgstr "在使用撕碎前請先閱讀此項" #: plugins/cryptography/popuppublic.cpp:182 msgid "Symmetrical encryption" msgstr "對稱式加密" #: plugins/cryptography/popuppublic.cpp:184 msgid "" "Symmetrical encryption: encryption does not use keys. You just need " "to give a password to encrypt/decrypt the file" msgstr "對稱式加密:加密不需使用金鑰。您只需要提供加密/解密檔案的密碼" #: plugins/highlight/highlightconfig.cpp:72 msgid "-New filter-" msgstr "-新的過濾器-" #: plugins/highlight/highlightpreferences.cpp:207 msgid "Rename Filter" msgstr "重新命名過濾器" #: plugins/highlight/highlightpreferences.cpp:207 msgid "Please enter the new name for the filter:" msgstr "請輸入這個過濾器的新名字:" #: plugins/history/converter.cpp:40 msgid "Would you like to remove old history files?" msgstr "您想要移除舊的歷史記錄檔案嗎?" #: plugins/history/converter.cpp:40 msgid "History Converter" msgstr "歷史記錄轉換器" #: plugins/history/converter.cpp:40 protocols/jabber/jabberaccount.cpp:1129 #: protocols/jabber/jabbercontact.cpp:921 msgid "Keep" msgstr "保留" #: plugins/history/converter.cpp:42 msgid "History converter" msgstr "歷史記錄轉換器" #: plugins/history/converter.cpp:97 #, c-format msgid "Parsing old history in %1" msgstr "正在解析 %1 的舊歷史記錄" #: plugins/history/converter.cpp:107 msgid "" "Parsing old history in %1:\n" "%2" msgstr "" "正在解析 %1 的舊歷史記錄:\n" "%2" #: plugins/history/historydialog.cpp:98 plugins/history/historydialog.cpp:556 #, c-format msgid "History for %1" msgstr "%1 的歷史記錄" #: plugins/history/historydialog.cpp:119 msgid "All" msgstr "所有人" #: plugins/history/historydialog.cpp:213 msgid "Loading..." msgstr "載入中..." #: plugins/history/historydialog.cpp:470 msgid "Searching..." msgstr "正在搜尋..." #: plugins/history/historydialog.cpp:536 plugins/history/historyviewer.ui:125 #, no-c-format msgid "Se&arch" msgstr "搜尋(&A)" #: plugins/history/historydialog.cpp:549 msgid "History for All Contacts" msgstr "所有聯絡人的歷史記錄" #: plugins/history/historydialog.cpp:572 plugins/history/historyviewer.ui:55 #, no-c-format msgid "Ready" msgstr "就緒" #: plugins/history/historyguiclient.cpp:44 msgid "History Last" msgstr "最後歷史" #: plugins/history/historyplugin.cpp:41 msgid "History" msgstr "歷史記錄" #: plugins/history/historyplugin.cpp:47 msgid "View &History" msgstr "檢視歷史記錄(&H)" #: plugins/history/historyplugin.cpp:66 msgid "" "Old history files from Kopete 0.6.x or older has been detected.\n" "Do you want to import and convert it to the new history format?" msgstr "" "偵測到來自 Kopete 0.6.x 或更早版本的舊的歷史記錄檔案。\n" "您要匯入它們並轉換成新的格式嗎?" #: plugins/history/historyplugin.cpp:68 msgid "History Plugin" msgstr "歷史記錄外掛程式" #: plugins/history/historyplugin.cpp:68 msgid "Import && Convert" msgstr "匯入並轉換" #: plugins/history/historyplugin.cpp:68 msgid "Do Not Import" msgstr "不要匯入" #: plugins/latex/latexguiclient.cpp:44 msgid "Preview Latex Images" msgstr "預覽 Latex 圖片" #: plugins/latex/latexguiclient.cpp:62 msgid "" "There are no latex in the message you are typing. The latex formula must be " "included between $$ and $$ " msgstr "您輸入的訊息中沒有 latex。Latex 公式必須包含在兩個 $$ 之間。" #: plugins/latex/latexguiclient.cpp:62 msgid "No Latex Formula" msgstr "沒有 Latex 公式" #: plugins/latex/latexguiclient.cpp:67 #, c-format msgid "Preview of the latex message :
%1" msgstr "Latex 訊息預覽:
%1" #: plugins/latex/latexplugin.cpp:95 msgid "" "I cannot find the Magick convert program.\n" "convert is required to render the Latex formulas.\n" "Please go to www.imagemagick.org or to your distribution site and get the " "right package." msgstr "" "找不到 Magick 轉換程式。\n" "要匯出 Latex 公式必須做轉換。\n" "請到 www.imagemagick.org 取得相關軟體。" #: plugins/nowlistening/nowlisteningguiclient.cpp:37 msgid "Send Media Info" msgstr "傳送媒體資訊" #: plugins/nowlistening/nowlisteningguiclient.cpp:60 msgid "" "None of the supported media players (KsCD, JuK, amaroK, Noatun or Kaffeine) " "are playing anything." msgstr "" "沒有支援的播放程式(KsCD、Juk、amaroK、Noatun 或是 Kaffeine)正在播放。" #: plugins/nowlistening/nowlisteningguiclient.cpp:61 msgid "Nothing to Send" msgstr "無可傳送內容" #: plugins/nowlistening/nowlisteningplugin.cpp:135 msgid "USAGE: /media - Displays information on current song" msgstr "用法:/media -顯示目前歌曲的資訊" #: plugins/nowlistening/nowlisteningplugin.cpp:174 msgid "" "_: Message from Kopete user to another user; used when sending media " "information even though there are no songs playing or no media players " "running\n" "Now Listening for Kopete - it would tell you what I am listening to, if I " "was listening to something on a supported media player." msgstr "" "注意聽 Kopete - 如果我正在使用支援的媒體播放器聽音樂,它會告訴您我現在在聽什" "麼。" #: plugins/nowlistening/nowlisteningplugin.cpp:405 msgid "Unknown track" msgstr "不明曲目" #: plugins/nowlistening/nowlisteningplugin.cpp:414 msgid "Unknown artist" msgstr "未知歌手" #: plugins/nowlistening/nowlisteningplugin.cpp:421 msgid "Unknown album" msgstr "未知專輯" #: plugins/nowlistening/nowlisteningplugin.cpp:428 msgid "Unknown player" msgstr "未知播放程式" #: plugins/smpppdcs/smpppdcspreferences.cpp:57 msgid "connection status is managed by Kopete" msgstr "連線狀態由 Kopete 管理" #: plugins/smpppdcs/smpppdcsprefsimpl.cpp:98 #: protocols/groupwise/ui/gwsearch.cpp:135 msgid "Searching" msgstr "搜尋" #: plugins/smpppdcs/smpppdcsprefsimpl.cpp:98 msgid "Searching for a SMPPPD on the local network..." msgstr "在本地端網路中搜尋 SMPPPD..." #: plugins/smpppdcs/unittest/main.cpp:26 plugins/smpppdcs/unittest/main.cpp:31 msgid "SMPPPDClientTests" msgstr "SMPPPDClientTests" #: plugins/statistics/statisticsdialog.cpp:45 #, c-format msgid "Statistics for %1" msgstr "%1 的統計資料" #: kopete/config/behavior/behaviorconfig_general.ui:16 #: kopete/config/behavior/kopeteawayconfigbase.ui:33 #: plugins/statistics/statisticsdialog.cpp:62 #, no-c-format msgid "General" msgstr "一般" #: plugins/statistics/statisticsdialog.cpp:193 msgid "

Statistics for %1

" msgstr "

%1 的統計資料

" #: plugins/statistics/statisticsdialog.cpp:196 msgid "" "
" msgstr "" "
" #: plugins/statistics/statisticsdialog.cpp:227 msgid "" "

Today

" msgstr "" "

今天

StatusFromTo
" #: plugins/statistics/statisticsdialog.cpp:387 msgid "
" msgstr "
" #: plugins/statistics/statisticsdialog.cpp:388 msgid "" "Total seen " "time : %2 hour(s)
" msgstr "總共看到時間 : %2 小時
" #: plugins/statistics/statisticsdialog.cpp:390 msgid "" "Total online time : %2 " "hour(s)
" msgstr "總上線時間 : %2 小時
" #: plugins/statistics/statisticsdialog.cpp:392 msgid "" "Total busy time : %2 " "hour(s)
" msgstr "總忙碌時間 : %2 小時
" #: plugins/statistics/statisticsdialog.cpp:393 msgid "" "Total offline time : " "%2 hour(s)" msgstr "總離線時間 : %2 小時" #: plugins/statistics/statisticsdialog.cpp:396 #: plugins/statistics/statisticsdialog.cpp:464 #: plugins/statistics/statisticsdialog.cpp:482 msgid "General information" msgstr "一般資訊" #: plugins/statistics/statisticsdialog.cpp:402 msgid "Average message length : %1 characters
" msgstr "平均訊息長度 : %1 個字元長
" #: plugins/statistics/statisticsdialog.cpp:403 msgid "Time between two messages : %1 second(s)" msgstr "訊息的時間間隔 : %1 秒" #: plugins/statistics/statisticsdialog.cpp:407 msgid "Last talk : %2
" msgstr "最後交談:%2
" #: plugins/statistics/statisticsdialog.cpp:408 msgid "" "Last time contact " "was present : %2" msgstr "聯絡人最後出現時間:%2" #: plugins/statistics/statisticsdialog.cpp:418 msgid "Current status" msgstr "目前狀態" #: plugins/statistics/statisticsdialog.cpp:419 msgid "Is %1 since %2" msgstr "從 %2起為 %1" #: plugins/statistics/statisticsdialog.cpp:429 msgid "When have I seen this contact ?" msgstr "我什麼時候看到這個聯絡人?" #: plugins/statistics/statisticsdialog.cpp:443 msgid "Between %1:00 and %2:00, I was able to see %3 status %4% of the hour." msgstr "在 %1 點到 %2 點之間,我有 %4% 的機會看到 %3 的狀態。" #: plugins/statistics/statisticsdialog.cpp:452 msgid "Online time" msgstr "上線時間" #: plugins/statistics/statisticsdialog.cpp:452 msgid "Away time" msgstr "離開時間" #: plugins/statistics/statisticsdialog.cpp:452 msgid "Offline time" msgstr "離線時間" #: plugins/statistics/statisticsdialog.cpp:457 msgid "online" msgstr "線上" #: plugins/statistics/statisticsdialog.cpp:459 msgid "away" msgstr "離開" #: plugins/statistics/statisticsdialog.cpp:461 msgid "offline" msgstr "離線" #: plugins/statistics/statisticsdialog.cpp:502 msgid "Between %1:00 and %2:00, I have seen %3 %4% %5." msgstr "在 %1 點到 %2 點之間,我看到%3 有 %4% 的 %5。" #: plugins/statistics/statisticsdialog.cpp:526 msgid "" "_: 1 is date, 2 is contact name, 3 is online status\n" "%1, %2 was %3" msgstr "於 %1,%2 為 %3" #: plugins/statistics/statisticsplugin.cpp:46 msgid "Statistics" msgstr "統計" #: plugins/statistics/statisticsplugin.cpp:55 msgid "View &Statistics" msgstr "檢視統計資料(&S)" #: plugins/translator/translatordialog.cpp:24 msgid "Translator Plugin" msgstr "翻譯外掛程式" #: plugins/translator/translatorguiclient.cpp:44 msgid "Translate" msgstr "翻譯" #: plugins/translator/translatorlanguages.cpp:36 msgid "English" msgstr "英文" #: plugins/translator/translatorlanguages.cpp:37 msgid "Chinese" msgstr "中文" #: plugins/translator/translatorlanguages.cpp:38 msgid "French" msgstr "法文" #: plugins/translator/translatorlanguages.cpp:39 msgid "German" msgstr "德文" #: plugins/translator/translatorlanguages.cpp:40 msgid "Italian" msgstr "義大利文" #: plugins/translator/translatorlanguages.cpp:41 msgid "Japanese" msgstr "日文" #: plugins/translator/translatorlanguages.cpp:42 msgid "Korean" msgstr "韓文" #: plugins/translator/translatorlanguages.cpp:43 msgid "Portuguese" msgstr "葡萄牙文" #: plugins/translator/translatorlanguages.cpp:44 msgid "Russian" msgstr "俄文" #: plugins/translator/translatorlanguages.cpp:45 msgid "Spanish" msgstr "西班牙文" #: plugins/translator/translatorplugin.cpp:48 msgid "Translator" msgstr "翻譯" #: plugins/translator/translatorplugin.cpp:79 msgid "Set &Language" msgstr "設定語言(&L)" #: plugins/translator/translatorplugin.cpp:367 #, fuzzy msgid "" "%2 \n" "Auto Translated: \n" "%1" msgstr "" "%2\n" "自動翻譯:%1" #: plugins/webpresence/webpresenceplugin.cpp:208 msgid "" "An error occurred when uploading your presence page.\n" "Check the path and write permissions of the destination." msgstr "" "上傳您的頁面時發生錯誤。\n" "請檢查您的目的路徑,以及是否有寫入權限。" #: plugins/webpresence/webpresenceplugin.cpp:218 msgid "Not yet known" msgstr "尚未知" #: protocols/gadu/gaduaccount.cpp:186 msgid "&Search for Friends" msgstr "搜尋朋友(&S)" #: protocols/gadu/gaduaccount.cpp:188 msgid "Export Contacts to Server" msgstr "將聯絡人匯出到伺服器" #: protocols/gadu/gaduaccount.cpp:190 msgid "Export Contacts to File..." msgstr "將聯絡人匯出到檔案..." #: protocols/gadu/gaduaccount.cpp:192 msgid "Import Contacts From File..." msgstr "由檔案匯入聯絡人..." #: protocols/gadu/gaduaccount.cpp:194 msgid "Only for Friends" msgstr "只顯示好友" #: protocols/gadu/gaduaccount.cpp:255 msgid "%1 <%2> " msgstr "%1 <%2> " #: protocols/gadu/gaduaccount.cpp:289 msgid "Go O&nline" msgstr "上線(&N)" #: protocols/gadu/gaduaccount.cpp:293 msgid "Set &Busy" msgstr "設定為忙碌(&B)" #: protocols/gadu/gaduaccount.cpp:297 msgid "Set &Invisible" msgstr "設定為隱身(&I)" #: protocols/gadu/gaduaccount.cpp:301 msgid "Go &Offline" msgstr "離線(&O)" #: protocols/gadu/gaduaccount.cpp:305 msgid "Set &Description..." msgstr "設定描述..." #: protocols/gadu/gaduaccount.cpp:685 msgid "connection using SSL was not possible, retrying without." msgstr "無法使用 SSL 連線,試著不用 SSL 重新連線。" #: protocols/gadu/gaduaccount.cpp:713 msgid "unable to connect to the Gadu-Gadu server(\"%1\")." msgstr "無法連線到 Gadu-Gadu 伺服器 %1。" #: protocols/gadu/gaduaccount.cpp:714 protocols/gadu/gaducommands.cpp:328 #: protocols/gadu/gaducommands.cpp:336 protocols/gadu/gaducommands.cpp:384 msgid "Connection Error" msgstr "連線錯誤" #: protocols/gadu/gaduaccount.cpp:897 msgid "Contacts exported to the server." msgstr "聯絡人已匯出到伺服器。" #: protocols/gadu/gaduaccount.cpp:928 msgid "Save Contacts List for Account %1 As" msgstr "儲存帳號 %1 的聯絡人清單為" #: protocols/gadu/gaduaccount.cpp:936 msgid "Unable to create temporary file." msgstr "無法建立暫存檔。" #: protocols/gadu/gaduaccount.cpp:936 protocols/gadu/gaduaccount.cpp:950 msgid "Save Contacts List Failed" msgstr "儲存聯絡人清單失敗" #: protocols/gadu/gaduaccount.cpp:974 msgid "Load Contacts List for Account %1 As" msgstr "載入帳號 %1 的聯絡人清單為" #: protocols/gadu/gaduaccount.cpp:994 protocols/gadu/gaduaccount.cpp:1000 msgid "Contacts List Load Has Failed" msgstr "載入聯絡人清單失敗" #: protocols/gadu/gaduaway.cpp:40 protocols/gadu/ui/gaduawayui.ui:19 #, no-c-format msgid "Away Dialog" msgstr "離開對話框" #: protocols/gadu/gaducommands.cpp:146 protocols/gadu/gaducommands.cpp:183 #: protocols/gadu/gaducommands.cpp:199 protocols/gadu/gaducommands.cpp:234 #: protocols/gadu/gaducommands.cpp:250 protocols/gadu/gadueditaccount.cpp:194 #: protocols/gadu/gadueditaccount.cpp:215 #: protocols/gadu/gadueditaccount.cpp:220 #: protocols/gadu/gadueditaccount.cpp:225 #: protocols/gadu/gadueditaccount.cpp:256 msgid "Gadu-Gadu" msgstr "Gadu-Gadu" #: protocols/gadu/gaducommands.cpp:146 protocols/gadu/gaducommands.cpp:234 msgid "Unable to retrieve token." msgstr "無法取得記號。" #: protocols/gadu/gaducommands.cpp:183 msgid "Registration FAILED" msgstr "註冊失敗" #: protocols/gadu/gaducommands.cpp:199 msgid "Unknown connection error while retrieving token." msgstr "取得記號時發生未知的連線錯誤。" #: protocols/gadu/gaducommands.cpp:207 #, c-format msgid "Token retrieving status: %1" msgstr "取得記號狀態:%1" #: protocols/gadu/gaducommands.cpp:216 msgid "Gadu-Gadu token retrieve problem" msgstr "取得 Gadu-Gadu 記號時發生問題" #: protocols/gadu/gaducommands.cpp:250 msgid "Unknown connection error while registering." msgstr "註冊時發生未知的連線錯誤。" #: protocols/gadu/gaducommands.cpp:257 #, c-format msgid "Registration status: %1" msgstr "註冊狀態:%1" #: protocols/gadu/gaducommands.cpp:266 msgid "Gadu-Gadu Registration Error" msgstr "Gadu-Gadu 註冊錯誤" #: protocols/gadu/gaducommands.cpp:278 msgid "Registration Finished" msgstr "已完成註冊" #: protocols/gadu/gaducommands.cpp:278 msgid "Registration has completed successfully." msgstr "已成功完成註冊程序。" #: protocols/gadu/gaducommands.cpp:281 msgid "Registration Error" msgstr "註冊錯誤" #: protocols/gadu/gaducommands.cpp:281 msgid "Incorrect data sent to server." msgstr "送出不正確的資料給伺服器。" #: protocols/gadu/gaducommands.cpp:328 protocols/gadu/gaducommands.cpp:336 msgid "Password reminding finished prematurely due to a connection error." msgstr "密碼提示過早完成,因為連線錯誤。" #: protocols/gadu/gaducommands.cpp:344 msgid "Successfully" msgstr "成功" #: protocols/gadu/gaducommands.cpp:344 msgid "Unsuccessful. Please retry." msgstr "不成功。請稍後再試。" #: protocols/gadu/gaducommands.cpp:345 msgid "Remind Password" msgstr "提示密碼" #: protocols/gadu/gaducommands.cpp:345 msgid "Remind password finished: " msgstr "密碼提示完成:" #: protocols/gadu/gaducommands.cpp:384 msgid "Password changing finished prematurely due to a connection error." msgstr "密碼變更過早完成,因為連線錯誤。" #: protocols/gadu/gaducommands.cpp:392 msgid "State Error" msgstr "狀態錯誤" #: protocols/gadu/gaducommands.cpp:393 msgid "" "Password changing finished prematurely due to a session related problem (try " "again later)." msgstr "密碼提示過早完成,因為發生連線相關問題。請稍後再試。" #: protocols/gadu/gaducommands.cpp:400 msgid "Changed Password" msgstr "已變更密碼" #: protocols/gadu/gaducommands.cpp:400 msgid "Your password has been changed." msgstr "您的密碼已經變更。" #: protocols/gadu/gaducontact.cpp:198 msgid "Show Profile" msgstr "顯示個人檔案" #: protocols/gadu/gaducontact.cpp:229 msgid "Gadu contact" msgstr "Gadu 聯絡人" #: protocols/gadu/gaducontact.cpp:247 msgid "Please go online to remove a contact from your contact list." msgstr "要移除聯絡人,請先上線。" #: protocols/gadu/gaducontact.cpp:248 msgid "Gadu-Gadu Plugin" msgstr "Gadu-Gadu 外掛程式" #: protocols/gadu/gadudcctransaction.cpp:237 #: protocols/jabber/jabberfiletransfer.cpp:148 msgid "&Resume" msgstr "恢復(&R)" #: protocols/gadu/gadudcctransaction.cpp:238 #: protocols/jabber/jabberfiletransfer.cpp:149 msgid "Over&write" msgstr "覆寫(&W)" #: protocols/gadu/gadudcctransaction.cpp:240 #: protocols/jabber/jabberfiletransfer.cpp:152 msgid "The file %1 already exists, do you want to resume or overwrite it?" msgstr "檔案 %1 已存在,您要恢復或覆寫?" #: protocols/gadu/gadudcctransaction.cpp:241 #: protocols/jabber/jabberfiletransfer.cpp:153 #, c-format msgid "File Exists: %1" msgstr "檔案已存在:%1" #: protocols/gadu/gadudcctransaction.cpp:408 msgid "" "Connection to peer was refused; it possibly does not listen for incoming " "connections." msgstr "連線被拒。有可能對方並未等待連線中。" #: protocols/gadu/gadudcctransaction.cpp:412 msgid "File transfer transaction was not agreed by peer." msgstr "檔案傳輸未被同意。" #: protocols/gadu/gadudcctransaction.cpp:416 msgid "File-transfer handshake failure." msgstr "檔案傳輸溝通失敗。" #: protocols/gadu/gadudcctransaction.cpp:419 msgid "File transfer had problems with the file." msgstr "檔案傳輸時檔案發生問題。" #: protocols/gadu/gadudcctransaction.cpp:422 msgid "There was network error during file transfer." msgstr "檔案傳輸時發生網路錯誤。" #: protocols/gadu/gadudcctransaction.cpp:425 msgid "Unknown File-Transfer error." msgstr "未知的檔案傳輸錯誤。" #: protocols/gadu/gadueditaccount.cpp:88 msgid "" "_: personal information being fetched from server\n" "

Fetching from server

" msgstr "

從伺服器抓取

" #: protocols/gadu/gadueditaccount.cpp:194 msgid "Registration FAILED." msgstr "註冊失敗。" #: protocols/gadu/gadueditaccount.cpp:215 msgid "Enter UIN please." msgstr "請輸入 UIN。" #: protocols/gadu/gadueditaccount.cpp:220 msgid "UIN should be a positive number." msgstr "UIN 應該為一正整數。" #: protocols/gadu/gadueditaccount.cpp:225 msgid "Enter password please." msgstr "請輸入密碼。" #: protocols/gadu/gadueditaccount.cpp:256 msgid "Starting DCC listening socket failed; dcc is not working now." msgstr "啟動 DCC 監聽 socket 時失敗,DCC 目前無法工作。" #: protocols/gadu/gadueditcontact.cpp:50 protocols/gadu/gadueditcontact.cpp:68 msgid "Edit Contact's Properties" msgstr "編輯聯絡人內容" #: protocols/gadu/gaduprotocol.cpp:57 msgid "Blocked" msgstr "已封鎖" #: protocols/gadu/gaduprotocol.cpp:61 msgid "A&way" msgstr "離開(&W)" #: protocols/gadu/gaduprotocol.cpp:63 protocols/gadu/gaduprotocol.cpp:65 #: protocols/groupwise/gwprotocol.cpp:52 #: protocols/meanwhile/meanwhileprotocol.cpp:51 #: protocols/yahoo/yahooprotocol.cpp:45 msgid "Busy" msgstr "忙碌" #: protocols/gadu/gaduprotocol.cpp:63 protocols/gadu/gaduprotocol.cpp:65 msgid "B&usy" msgstr "忙碌(&U)" #: protocols/gadu/gaduprotocol.cpp:67 protocols/gadu/gaduprotocol.cpp:69 msgid "I&nvisible" msgstr "隱身(&N)" #: protocols/gadu/gadupubdir.cpp:74 protocols/gadu/gadupubdir.cpp:315 msgid "Search &More..." msgstr "搜尋更多(&M)..." #: protocols/gadu/gadupubdir.cpp:95 msgid "Gadu-Gadu Public Directory" msgstr "Gadu-Gadu 公開目錄" #: protocols/gadu/gadupubdir.cpp:102 msgid "&New Search" msgstr "新搜尋(&N)" #: protocols/gadu/gadupubdir.cpp:103 protocols/gadu/gadupubdir.cpp:280 #: protocols/irc/ui/channellist.cpp:207 msgid "S&earch" msgstr "搜尋(&E)" #: protocols/gadu/gadupubdir.cpp:104 msgid "&Add User..." msgstr "加入使用者(&A)..." #: protocols/gadu/gaduregisteraccount.cpp:39 msgid "Register New Account" msgstr "註冊新帳號" #: protocols/gadu/gaduregisteraccount.cpp:45 #: protocols/jabber/ui/dlgregister.ui:129 #: protocols/jabber/ui/dlgservices.ui:151 #, no-c-format msgid "&Register" msgstr "註冊(&R)" #: protocols/gadu/gaduregisteraccount.cpp:67 msgid "Retrieving token" msgstr "取得記號中" #: protocols/gadu/gaduregisteraccount.cpp:89 msgid "Please enter a valid E-Mail Address." msgstr "請輸入有效的電子郵件地址。" #: protocols/gadu/gaduregisteraccount.cpp:99 #: protocols/jabber/ui/jabberregisteraccount.cpp:152 msgid "Please enter the same password twice." msgstr "請輸入相同的密碼兩次。" #: protocols/gadu/gaduregisteraccount.cpp:106 #: protocols/jabber/ui/jabberregisteraccount.cpp:161 msgid "Password entries do not match." msgstr "密碼不符合。" #: protocols/gadu/gaduregisteraccount.cpp:113 msgid "Please enter the verification sequence." msgstr "請輸入檢查序列。" #: protocols/gadu/gaduregisteraccount.cpp:159 #, c-format msgid "Account created; your new UIN is %1." msgstr "帳號已建立。您的新的 UIN 為 %1。" #: protocols/gadu/gaduregisteraccount.cpp:167 #, c-format msgid "Registration failed: %1" msgstr "註冊失敗:%1" #: protocols/gadu/gadusession.cpp:217 protocols/gadu/gadusession.cpp:230 #: protocols/gadu/gadusession.cpp:242 protocols/gadu/gadusession.cpp:275 msgid "You are not connected to the server." msgstr "無法連線到伺服器。" #: protocols/gadu/gadusession.cpp:289 protocols/gadu/gadusession.cpp:307 msgid "You have to be connected to the server to change your status." msgstr "您要變更您的狀態,必須先連線到伺服器。" #: protocols/gadu/gadusession.cpp:574 msgid "idle" msgstr "閒置" #: protocols/gadu/gadusession.cpp:576 msgid "resolving host" msgstr "反解主機" #: protocols/gadu/gadusession.cpp:578 msgid "connecting" msgstr "連線中" #: protocols/gadu/gadusession.cpp:580 msgid "reading data" msgstr "讀取資料中" #: protocols/gadu/gadusession.cpp:582 msgid "error" msgstr "錯誤" #: protocols/gadu/gadusession.cpp:584 msgid "connecting to hub" msgstr "連線到集線器" #: protocols/gadu/gadusession.cpp:586 msgid "connecting to server" msgstr "連線到伺服器" #: protocols/gadu/gadusession.cpp:588 msgid "retrieving key" msgstr "取得金鑰中" #: protocols/gadu/gadusession.cpp:590 msgid "waiting for reply" msgstr "等待回應中" #: protocols/gadu/gadusession.cpp:592 msgid "connected" msgstr "已連線" #: protocols/gadu/gadusession.cpp:594 msgid "sending query" msgstr "送出查詢中" #: protocols/gadu/gadusession.cpp:596 msgid "reading header" msgstr "讀取標頭中" #: protocols/gadu/gadusession.cpp:598 msgid "parse data" msgstr "剖析資料中" #: protocols/gadu/gadusession.cpp:600 msgid "done" msgstr "完成" #: protocols/gadu/gadusession.cpp:602 msgid "Tls connection negotiation" msgstr "TLS 連線交涉" #: protocols/gadu/gadusession.cpp:604 msgid "unknown" msgstr "未知" #: protocols/gadu/gadusession.cpp:612 msgid "Resolving error." msgstr "反解錯誤。" #: protocols/gadu/gadusession.cpp:614 msgid "Connecting error." msgstr "連線錯誤。" #: protocols/gadu/gadusession.cpp:616 msgid "Reading error." msgstr "讀取錯誤。" #: protocols/gadu/gadusession.cpp:618 msgid "Writing error." msgstr "寫入錯誤。" #: protocols/gadu/gadusession.cpp:620 protocols/gadu/gadusession.cpp:645 #, c-format msgid "Unknown error number %1." msgstr "未知的錯誤編號 %1。" #: protocols/gadu/gadusession.cpp:629 msgid "Unable to resolve server address. DNS failure." msgstr "無法反解伺服器位址。名稱伺服器失敗。" #: protocols/gadu/gadusession.cpp:631 msgid "Unable to connect to server." msgstr "無法連線到伺服器。" #: protocols/gadu/gadusession.cpp:633 msgid "Server send incorrect data. Protocol error." msgstr "伺服器送出不正確的資料。協定錯誤。" #: protocols/gadu/gadusession.cpp:635 msgid "Problem reading data from server." msgstr "從伺服器上讀取資料時發生問題。" #: protocols/gadu/gadusession.cpp:637 msgid "Problem sending data to server." msgstr "送出資料給伺服器時發生問題。" #: protocols/gadu/gadusession.cpp:639 msgid "Incorrect password." msgstr "不正確的密碼。" #: protocols/gadu/gadusession.cpp:643 msgid "" "Unable to connect over encrypted channel.\n" "Try to turn off encryption support in Gadu account settings and reconnect." msgstr "" "無法透過加密頻道連線。\n" "請試著將 Gadu 帳號設定中加密支援關閉,然後再試一次。" #: protocols/groupwise/gwaccount.cpp:82 msgid "&Set Auto-Reply..." msgstr "設定自動回覆(&S)..." #: protocols/groupwise/gwaccount.cpp:84 msgid "&Join Channel..." msgstr "加入頻道(&J)..." #: protocols/groupwise/gwaccount.cpp:86 msgid "&Manage Privacy..." msgstr "管理隱私(&M)..." #: protocols/groupwise/gwaccount.cpp:251 protocols/jabber/jabberaccount.cpp:428 #: protocols/jabber/ui/jabberregisteraccount.cpp:270 #, fuzzy msgid "" "SSL support could not be initialized for account %1. This is most likely " "because the TQCA TLS plugin is not installed on your system." msgstr "" "無法初始化帳號 %1 的 SSL 支援。這最有可能是因為您的系統上沒裝 QCA TLS 外掛程" "式。" #: protocols/groupwise/gwaccount.cpp:253 msgid "GroupWise SSL Error" msgstr "GroupWise SSL 錯誤" #: protocols/groupwise/gwaccount.cpp:367 msgid "" "_: Message Sending Failed\n" "Kopete was not able to send the last message sent on account '%1'.\n" "If possible, please send the console output from Kopete to " " for analysis." msgstr "" "Kopete 無法送出最後一個訊息到帳號 %1。\n" "如果可以的話,請送出主控台的除錯輸出給 來分析原因。" #: protocols/groupwise/gwaccount.cpp:367 msgid "Unable to Send Message on Account '%1'" msgstr "無法送出訊息到帳號 %1" #: protocols/groupwise/gwaccount.cpp:577 msgid "Conflicting Changes Made Offline" msgstr "離線時發生衝突的改變" #: protocols/groupwise/gwaccount.cpp:577 msgid "" "A change happened to your GroupWise contact list while you were offline " "which was impossible to reconcile." msgstr "當您離線時,您的 GroupWise 聯絡人清單被改變了,因此無法同步。" #: protocols/groupwise/gwaccount.cpp:650 msgid "" "_: Error shown when connecting failed\n" "Kopete was not able to connect to the GroupWise Messenger server for account " "'%1'.\n" "Please check your server and port settings and try again." msgstr "" "Kopete 無法連線到帳號 %1 的 GroupWise Messenger 伺服器。請檢查您的伺服器與連" "接埠的設定,然後再試一次。" #: protocols/groupwise/gwaccount.cpp:650 msgid "Unable to Connect '%1'" msgstr "無法連線到 %1" #: protocols/groupwise/gwaccount.cpp:720 protocols/jabber/jabberaccount.cpp:459 msgid "No certificate was presented." msgstr "沒有憑證。" #: protocols/groupwise/gwaccount.cpp:724 protocols/jabber/jabberaccount.cpp:463 msgid "The host name does not match the one in the certificate." msgstr "此主機名稱與憑證中不符。" #: protocols/groupwise/gwaccount.cpp:728 protocols/jabber/jabberaccount.cpp:467 msgid "The Certificate Authority rejected the certificate." msgstr "憑證認證中心拒絕此憑證。" #: protocols/groupwise/gwaccount.cpp:733 protocols/jabber/jabberaccount.cpp:472 msgid "The certificate is untrusted." msgstr "此憑證不受信任。" #: protocols/groupwise/gwaccount.cpp:737 protocols/jabber/jabberaccount.cpp:476 msgid "The signature is invalid." msgstr "此簽章不正確。" #: protocols/groupwise/gwaccount.cpp:741 protocols/jabber/jabberaccount.cpp:480 msgid "The Certificate Authority is invalid." msgstr "憑證認證中心不正確。" #: protocols/groupwise/gwaccount.cpp:746 protocols/jabber/jabberaccount.cpp:485 msgid "Invalid certificate purpose." msgstr "不合法的憑證目的。" #: protocols/groupwise/gwaccount.cpp:750 protocols/jabber/jabberaccount.cpp:489 msgid "The certificate is self-signed." msgstr "此憑證為自行簽署。" #: protocols/groupwise/gwaccount.cpp:754 protocols/jabber/jabberaccount.cpp:493 msgid "The certificate has been revoked." msgstr "此憑證已被撤銷。" #: protocols/groupwise/gwaccount.cpp:758 protocols/jabber/jabberaccount.cpp:497 msgid "Maximum certificate chain length was exceeded." msgstr "已超過最大憑證鍊長度。" #: protocols/groupwise/gwaccount.cpp:762 protocols/jabber/jabberaccount.cpp:501 msgid "The certificate has expired." msgstr "憑證已過期。" #: protocols/groupwise/gwaccount.cpp:767 protocols/jabber/jabberaccount.cpp:506 msgid "An unknown error occurred trying to validate the certificate." msgstr "要確認憑證時發生未知的錯誤。" #: protocols/groupwise/gwaccount.cpp:773 msgid "The certificate of server %1 could not be validated for account %2: %3" msgstr "無法確認帳號 %2 的伺服器 %1 的憑證:%3" #: protocols/groupwise/gwaccount.cpp:777 msgid "GroupWise Connection Certificate Problem" msgstr "GroupWise 連線憑證問題" #: protocols/groupwise/gwaccount.cpp:826 msgid "" "_: Prefix used for automatically generated auto-reply messages when the " "contact is Away, contains contact's name\n" "Auto reply from %1: " msgstr "來自 %1 的自動回覆:" #: protocols/groupwise/gwaccount.cpp:832 msgid "" "_: Prefix used for broadcast messages\n" "Broadcast message from %1: " msgstr "來自 %1 的廣播訊息:" #: protocols/groupwise/gwaccount.cpp:838 msgid "" "_: Prefix used for system broadcast messages\n" "System Broadcast message from %1: " msgstr "來自 %1 的廣播訊息:" #: protocols/groupwise/gwaccount.cpp:1212 msgid "" "The contact %1 could not be added to the contact list, with error message: %2" msgstr "無法將聯絡人 %1 加入聯絡人清單,錯誤訊息:%2" #: protocols/groupwise/gwaccount.cpp:1214 msgid "Error Adding Contact" msgstr "加入聯絡人時發生錯誤" #: protocols/groupwise/gwaccount.cpp:1258 msgid "Signed in as %1 Elsewhere" msgstr "由別處登入為 %1" #: protocols/groupwise/gwaccount.cpp:1259 msgid "" "_: The parameter is the user's own account id for this protocol\n" "You have been disconnected from GroupWise Messenger because you signed in as " "%1 elsewhere" msgstr "您已中斷與 GroupWise Messenger 的連線,因為從別處又登入為 %1" #: protocols/groupwise/gwaccount.cpp:1367 msgid "%1 has been invited to join this conversation." msgstr "%1 被邀請加入此對話。" #: protocols/groupwise/gwaccount.cpp:1393 msgid "Enter Auto-Reply Message" msgstr "輸入自動回覆訊息" #: protocols/groupwise/gwaccount.cpp:1394 msgid "" "Please enter an Auto-Reply message that will be shown to users who message " "you while Away or Busy" msgstr "請輸入自動回覆訊息,在您離開或忙碌時會自動回覆給其他使用者。" #: protocols/groupwise/gwcontact.cpp:166 msgid "Unblock User" msgstr "解除封鎖使用者" #: protocols/groupwise/gwcontact.cpp:166 msgid "Block User" msgstr "封鎖使用者" #: protocols/groupwise/gwcontact.cpp:240 msgid "%1|Blocked" msgstr "%1|已封鎖" #: protocols/groupwise/gwmessagemanager.cpp:65 msgid "&Invite" msgstr "邀請(&I)" #: protocols/groupwise/gwmessagemanager.cpp:68 #: protocols/groupwise/gwmessagemanager.cpp:506 msgid "Security Status" msgstr "安全性狀態" #: protocols/groupwise/gwmessagemanager.cpp:69 msgid "Conversation is secure" msgstr "對話是安全的" #: protocols/groupwise/gwmessagemanager.cpp:71 #: protocols/groupwise/gwmessagemanager.cpp:513 msgid "Archiving Status" msgstr "歸檔狀態" #: protocols/groupwise/gwmessagemanager.cpp:199 #, c-format msgid "An error occurred when trying to start a chat: %1" msgstr "開啟聊天時發生錯誤:%1" #: protocols/groupwise/gwmessagemanager.cpp:226 msgid "" "Your message could not be sent. You cannot send messages while your status " "is Appear Offline. " msgstr "當您的狀態是「離線」時,您的訊息無法送出。" #: protocols/groupwise/gwmessagemanager.cpp:319 msgid "&Other..." msgstr "其他(&O)..." #: protocols/groupwise/gwmessagemanager.cpp:338 #: protocols/groupwise/gwmessagemanager.cpp:384 msgid "Enter Invitation Message" msgstr "輸入邀請訊息" #: protocols/groupwise/gwmessagemanager.cpp:339 #: protocols/groupwise/gwmessagemanager.cpp:385 msgid "Enter the reason for the invitation, or leave blank for no reason:" msgstr "輸入邀請的理由,或留白:" #: protocols/groupwise/gwmessagemanager.cpp:363 msgid "Search for Contact to Invite" msgstr "搜尋要邀請的聯絡人" #: protocols/groupwise/gwmessagemanager.cpp:398 msgid "" "_: label attached to contacts who have been invited but are yet to join a " "chat\n" "(pending)" msgstr "(已邀請)" #: protocols/groupwise/gwmessagemanager.cpp:445 msgid "" "All the other participants have left, and other invitations are still " "pending. Your messages will not be delivered until someone else joins the " "chat." msgstr "" "某些邀請還在等待回覆,而所有其他的參加者已離開。您的訊息現在無法送出,直到有" "人加入。" #: protocols/groupwise/gwmessagemanager.cpp:471 msgid "%1 has rejected an invitation to join this conversation." msgstr "%1 已拒絕加入此對話。" #: protocols/groupwise/gwmessagemanager.cpp:493 msgid "Conversation is being administratively logged" msgstr "對話已被紀錄。" #: protocols/groupwise/gwmessagemanager.cpp:498 msgid "Conversation is not being administratively logged" msgstr "對話未被紀錄。" #: protocols/groupwise/gwmessagemanager.cpp:506 msgid "This conversation is secured with SSL security." msgstr "此對話經由 SSL 加密。" #: protocols/groupwise/gwmessagemanager.cpp:513 msgid "This conversation is being logged administratively." msgstr "此對話已被紀錄。" #: protocols/groupwise/gwprotocol.cpp:56 #: protocols/meanwhile/meanwhileprotocol.cpp:56 #: protocols/yahoo/yahooprotocol.cpp:55 msgid "Idle" msgstr "閒置" #: protocols/groupwise/gwprotocol.cpp:59 msgid "Appear Offline" msgstr "離線" #: protocols/groupwise/gwprotocol.cpp:59 msgid "A&ppear Offline" msgstr "離線(&P)" #: protocols/groupwise/gwprotocol.cpp:64 msgid "Invalid Status" msgstr "不合法的狀態" #: protocols/groupwise/gwprotocol.cpp:71 msgid "Auto Reply Message" msgstr "自動回覆訊息" #: protocols/groupwise/gwprotocol.cpp:72 msgid "Common Name" msgstr "通用名稱(Common Name)" #: protocols/groupwise/libgroupwise/gwerror.cpp:29 msgid "Access denied" msgstr "存取被拒" #: protocols/groupwise/libgroupwise/gwerror.cpp:32 msgid "Not supported" msgstr "未支援" #: protocols/groupwise/libgroupwise/gwerror.cpp:35 msgid "Password expired" msgstr "密碼已過期" #: protocols/groupwise/libgroupwise/gwerror.cpp:38 msgid "Invalid password" msgstr "不正確的密碼" #: protocols/groupwise/libgroupwise/gwerror.cpp:41 msgid "User not found" msgstr "找不到使用者" #: protocols/groupwise/libgroupwise/gwerror.cpp:44 msgid "Attribute not found" msgstr "找不到屬性" #: protocols/groupwise/libgroupwise/gwerror.cpp:47 msgid "User is disabled" msgstr "使用者已被關閉" #: protocols/groupwise/libgroupwise/gwerror.cpp:50 msgid "Directory failure" msgstr "目錄失敗" #: protocols/groupwise/libgroupwise/gwerror.cpp:53 msgid "Host not found" msgstr "找不到主機" #: protocols/groupwise/libgroupwise/gwerror.cpp:56 msgid "Locked by admin" msgstr "被管理者鎖定" #: protocols/groupwise/libgroupwise/gwerror.cpp:59 msgid "Duplicate participant" msgstr "複製參加者" #: protocols/groupwise/libgroupwise/gwerror.cpp:62 msgid "Server busy" msgstr "伺服器忙碌" #: protocols/groupwise/libgroupwise/gwerror.cpp:65 msgid "Object not found" msgstr "找不到物件" #: protocols/groupwise/libgroupwise/gwerror.cpp:68 msgid "Directory update" msgstr "目錄更新" #: protocols/groupwise/libgroupwise/gwerror.cpp:71 msgid "Duplicate folder" msgstr "複製資料夾" #: protocols/groupwise/libgroupwise/gwerror.cpp:74 msgid "Contact list entry already exists" msgstr "聯絡人清單項目已存在" #: protocols/groupwise/libgroupwise/gwerror.cpp:77 msgid "User not allowed" msgstr "使用者未經允許" #: protocols/groupwise/libgroupwise/gwerror.cpp:80 msgid "Too many contacts" msgstr "聯絡人太多" #: protocols/groupwise/libgroupwise/gwerror.cpp:83 msgid "Conference not found" msgstr "找不到會議" #: protocols/groupwise/libgroupwise/gwerror.cpp:86 msgid "Too many folders" msgstr "資料夾太多" #: protocols/groupwise/libgroupwise/gwerror.cpp:89 msgid "Server protocol error" msgstr "伺服器協定錯誤" #: protocols/groupwise/libgroupwise/gwerror.cpp:92 msgid "Conversation invitation error" msgstr "對話邀請發生錯誤" #: protocols/groupwise/libgroupwise/gwerror.cpp:95 msgid "User is blocked" msgstr "使用者被封鎖" #: protocols/groupwise/libgroupwise/gwerror.cpp:98 msgid "Master archive is missing" msgstr "主要歸檔遺失" #: protocols/groupwise/libgroupwise/gwerror.cpp:101 msgid "Expired password in use" msgstr "使用中的已過期密碼" #: protocols/groupwise/libgroupwise/gwerror.cpp:104 msgid "Credentials missing" msgstr "憑證遺失" #: protocols/groupwise/libgroupwise/gwerror.cpp:107 msgid "Authentication failed" msgstr "認證失敗" #: protocols/groupwise/libgroupwise/gwerror.cpp:110 msgid "Eval connection limit" msgstr "Eval 連線限制" #: protocols/groupwise/libgroupwise/gwerror.cpp:113 msgid "Unsupported client version" msgstr "未支援的客戶端版本。" #: protocols/groupwise/libgroupwise/gwerror.cpp:116 msgid "A duplicate chat was found" msgstr "發現重複的聊天" #: protocols/groupwise/libgroupwise/gwerror.cpp:119 msgid "Chat not found" msgstr "找不到聊天" #: protocols/groupwise/libgroupwise/gwerror.cpp:122 msgid "Invalid chat name" msgstr "無效的聊天名稱" #: protocols/groupwise/libgroupwise/gwerror.cpp:125 msgid "The chat is active" msgstr "此聊天進行中" #: protocols/groupwise/libgroupwise/gwerror.cpp:128 msgid "Chat is busy; try again" msgstr "聊天忙碌中,請再試一次" #: protocols/groupwise/libgroupwise/gwerror.cpp:131 msgid "Tried request too soon after another; try again" msgstr "要求太過頻繁,請再試一次" #: protocols/groupwise/libgroupwise/gwerror.cpp:134 msgid "Server's chat subsystem is not active" msgstr "伺服器的聊天系統未開啟" #: protocols/groupwise/libgroupwise/gwerror.cpp:137 msgid "The chat update request is invalid" msgstr "聊天更新要求不合法" #: protocols/groupwise/libgroupwise/gwerror.cpp:140 msgid "Write failed due to directory mismatch" msgstr "寫入失敗,因為目錄不符合" #: protocols/groupwise/libgroupwise/gwerror.cpp:143 msgid "Recipient's client version is too old" msgstr "接收者的客戶端版本太舊" #: protocols/groupwise/libgroupwise/gwerror.cpp:146 msgid "Chat has been removed from server" msgstr "已從伺服器上移除聊天" #: protocols/groupwise/libgroupwise/gwerror.cpp:149 #, c-format msgid "Unrecognized error code: %s" msgstr "無法辨識的錯誤代碼:%s" #: protocols/groupwise/ui/gwaddcontactpage.cpp:63 #: protocols/jabber/ui/jabberaddcontactpage.cpp:62 msgid "You need to be connected to be able to add contacts." msgstr "您要新增聯絡人必須先連線。" #: protocols/groupwise/ui/gwaddcontactpage.cpp:64 msgid "Connect to GroupWise Messenger and try again." msgstr "連線到 GroupWise Nessenger 然後再試一次。" #: protocols/groupwise/ui/gwchatpropsdialog.cpp:33 #: protocols/groupwise/ui/gwchatpropsdialog.cpp:41 msgid "Chatroom properties" msgstr "聊天室屬性" #: protocols/groupwise/ui/gwchatsearchdialog.cpp:38 msgid "Search Chatrooms" msgstr "搜尋聊天室" #: protocols/groupwise/ui/gwchatsearchdialog.cpp:67 msgid "Updating chatroom list..." msgstr "更新聊天室清單" #: protocols/groupwise/ui/gwcontactproperties.cpp:81 msgid "Contact Properties" msgstr "聯絡人屬性" #: protocols/groupwise/ui/gwcontactproperties.cpp:104 msgid "Telephone Number" msgstr "電話號碼" #: protocols/groupwise/ui/gwcontactproperties.cpp:106 msgid "Department" msgstr "部門" #: protocols/groupwise/ui/gwcontactproperties.cpp:108 msgid "Location" msgstr "位置" #: protocols/groupwise/ui/gwcontactproperties.cpp:110 msgid "Mailstop" msgstr "內部郵遞位址" #: protocols/groupwise/ui/gwcontactproperties.cpp:112 msgid "Personal Title" msgstr "個人職稱" #: protocols/groupwise/ui/gwcontactproperties.cpp:114 #: protocols/yahoo/yahooprotocol.cpp:65 msgid "Title" msgstr "職稱" #: protocols/groupwise/ui/gweditaccountwidget.cpp:104 msgid "" "The changes you just made will take effect next time you log in with " "GroupWise." msgstr "您做的修改會在下一次登入 GroupWise 時生效。" #: protocols/groupwise/ui/gweditaccountwidget.cpp:105 msgid "GroupWise Settings Changed While Signed In" msgstr "GroupWise 設定在登入時已變更" #: protocols/groupwise/ui/gwprivacydialog.cpp:52 #, c-format msgid "" "_: Account specific privacy settings\n" "Manage Privacy for %1" msgstr "管理 %1 的隱私設定" #: protocols/groupwise/ui/gwprivacydialog.cpp:62 msgid "Privacy settings have been administratively locked" msgstr "隱私設定被管理者鎖住了" #: protocols/groupwise/ui/gwprivacydialog.cpp:100 msgid "" msgstr "<所有其他人>" #: protocols/groupwise/ui/gwprivacydialog.cpp:180 msgid "Search for Contact to Block" msgstr "搜尋要封鎖的聯絡人" #: protocols/groupwise/ui/gwprivacydialog.cpp:346 msgid "" "You can only change privacy settings while you are logged in to the " "GroupWise Messenger server." msgstr "只有您登入到 GroupWise Messenger 伺服器時才能更改隱私設定。" #: protocols/groupwise/ui/gwprivacydialog.cpp:346 msgid "'%1' Not Logged In" msgstr "%1 尚未登入" #: protocols/groupwise/ui/gwreceiveinvitationdialog.cpp:37 msgid "Invitation to Conversation" msgstr "邀請到會話" #: protocols/groupwise/ui/gwsearch.cpp:167 #, c-format msgid "" "_n: 1 matching user found\n" "%n matching users found" msgstr "找到 %n 個符合的使用者" #: protocols/irc/ircaccount.cpp:82 msgid "Kopete IRC Plugin %1 [http://trinitydesktop.org]" msgstr "Kopete IRC 外掛程式 %1 【http://trinitydesktop.org】" #: protocols/irc/ircaccount.cpp:112 msgid "Set Away" msgstr "設定離開" #: protocols/irc/ircaccount.cpp:176 #, c-format msgid "Temporary Network - %1" msgstr "暫時網路 - %1" #: protocols/irc/ircaccount.cpp:177 msgid "Network imported from previous version of Kopete, or an IRC URI" msgstr "由前一版本的 Kopete 或 IRC URI 匯入的網路" #: protocols/irc/ircaccount.cpp:210 msgid "Join Channel..." msgstr "加入頻道..." #: protocols/irc/ircaccount.cpp:212 msgid "Search Channels..." msgstr "搜尋頻道..." #: protocols/irc/ircaccount.cpp:219 msgid "Plugin Unloaded" msgstr "外掛程式已卸載" #: protocols/irc/ircaccount.cpp:228 protocols/irc/ircaccount.cpp:246 #: protocols/irc/ircaccount.cpp:698 protocols/irc/ircaccount.cpp:785 #: protocols/irc/ircchannelcontact.cpp:442 #: protocols/irc/ircchannelcontact.cpp:568 #: protocols/irc/ircchannelcontact.cpp:575 #: protocols/irc/ircchannelcontact.cpp:583 #: protocols/irc/ircchannelcontact.cpp:589 msgid "IRC Plugin" msgstr "IRC 外掛程式" #: protocols/irc/ircaccount.cpp:229 msgid "The nickname %1 is already in use. Please enter an alternate nickname:" msgstr "暱稱 %1 已經被使用了。請輸入另一個暱稱:" #: protocols/irc/ircaccount.cpp:246 msgid "The nickname %1 is already in use" msgstr "暱稱 %1 已經被使用了" #: protocols/irc/ircaccount.cpp:308 msgid "" "The network associated with this account, %1, no longer exists. " "Please ensure that the account has a valid network. The account will not be " "enabled until you do so." msgstr "" "與此帳號 %1 相關的網路已不存在。請確認此帳號有一個合法的網路,然後" "此帳號才會被開啟。" #: protocols/irc/ircaccount.cpp:310 #, c-format msgid "Problem Loading %1" msgstr "載入 %1 時發生問題" #: protocols/irc/ircaccount.cpp:429 msgid "Show Server Window" msgstr "顯示伺服器視窗" #: protocols/irc/ircaccount.cpp:433 msgid "Show Security Information" msgstr "顯示安全性資訊" #: protocols/irc/ircaccount.cpp:458 msgid "" "The network associated with this account, %1, has no valid hosts. " "Please ensure that the account has a valid network." msgstr "" "與此帳號 %1 相關的主機已不存在。請確認此帳號有一個合法的網路。" #: protocols/irc/ircaccount.cpp:459 msgid "Network is Empty" msgstr "網路是空的" #: protocols/irc/ircaccount.cpp:465 msgid "" "Kopete could not connect to any of the servers in the network associated " "with this account (%1). Please try again later." msgstr "" "Kopete 無法連接到此帳號 %1 相關網路上的任何伺服器。請稍候再試。" #: protocols/irc/ircaccount.cpp:466 msgid "Network is Unavailable" msgstr "網路無法使用" #: protocols/irc/ircaccount.cpp:493 msgid "Connecting to %1..." msgstr "連線到 %1 ..." #: protocols/irc/ircaccount.cpp:495 msgid "Using SSL" msgstr "使用 SSL" #: protocols/irc/ircaccount.cpp:590 msgid "The IRC server is currently too busy to respond to this request." msgstr "IRC 伺服器目前過於忙碌,因此無法回應。" #: protocols/irc/ircaccount.cpp:591 msgid "Server is Busy" msgstr "伺服器忙碌中" #: protocols/irc/ircaccount.cpp:600 #, c-format msgid "Channel List for %1" msgstr "%1 的頻道清單" #: protocols/irc/ircaccount.cpp:698 msgid "\"You are not allowed to add yourself to your contact list." msgstr "您不能將自己加入聯絡人清單中。" #: protocols/irc/ircaccount.cpp:751 msgid "Please enter name of the channel you want to join:" msgstr "請輸入您要加入的頻道名稱:" #: protocols/irc/ircaccount.cpp:784 protocols/irc/ircprotocol.cpp:538 #: protocols/irc/ircprotocol.cpp:558 msgid "" "\"%1\" is an invalid channel. Channels must start with '#', '!', '+', or '&'." msgstr "「%1」 是不合法的頻道名稱。頻道名稱必須以 #,!,+ 或 & 開頭。" #: protocols/irc/ircaccount.cpp:792 msgid "CTCP %1 REPLY: %2" msgstr "CTCP %1 回覆:%2" #: protocols/irc/ircaccount.cpp:798 msgid "The channel \"%1\" does not exist" msgstr "頻道 %1 不存在" #: protocols/irc/ircaccount.cpp:800 msgid "The nickname \"%1\" does not exist" msgstr "暱稱 %1 不存在" #: protocols/irc/ircaddcontactpage.cpp:74 msgid "You need to specify a channel to join, or query to open." msgstr "您必須指定要加入哪個頻道或是查詢才能開啟。" #: protocols/irc/ircaddcontactpage.cpp:74 msgid "You Must Specify a Channel" msgstr "您必須指定一個頻道" #: protocols/irc/ircchannelcontact.cpp:62 msgid "Only Operators Can Change &Topic" msgstr "只有管理員才能改變標題(&T)" #: protocols/irc/ircchannelcontact.cpp:63 msgid "&No Outside Messages" msgstr "不接受外部訊息(&N)" #: protocols/irc/ircchannelcontact.cpp:64 msgid "&Secret" msgstr "秘密(&S)" #: protocols/irc/ircchannelcontact.cpp:65 msgid "&Moderated" msgstr "受管控中(&M)" #: protocols/irc/ircchannelcontact.cpp:66 msgid "&Invite Only" msgstr "被邀請才能加入(&I)" #: protocols/irc/ircchannelcontact.cpp:275 msgid "Topic for %1 is set empty." msgstr "%1 的標題已被清空。" #: protocols/irc/ircchannelcontact.cpp:280 msgid "Topic for %1 is %2" msgstr "%1 的標題為 %2" #: protocols/irc/ircchannelcontact.cpp:365 #, c-format msgid "You have joined channel %1" msgstr "您已經加入頻道 %1" #: protocols/irc/ircchannelcontact.cpp:381 msgid "User %1 joined channel %2" msgstr "使用者 %1 已經加入頻道 %2" #: protocols/irc/ircchannelcontact.cpp:416 msgid "%1 was kicked by %2. Reason: %3" msgstr "%1 被 %2 踢走了。理由:%3" #: protocols/irc/ircchannelcontact.cpp:418 msgid "%1 was kicked by %2." msgstr "%1 被 %2 踢走了。" #: protocols/irc/ircchannelcontact.cpp:437 msgid "You were kicked from %1 by %2. Reason: %3" msgstr "您被 %2 從 %1 中踢出去了。理由:%3" #: protocols/irc/ircchannelcontact.cpp:439 msgid "You were kicked from %1 by %2." msgstr "您被 %2 從 %1 中踢出去了。" #: protocols/irc/ircchannelcontact.cpp:459 msgid "New Topic" msgstr "新話題" #: protocols/irc/ircchannelcontact.cpp:459 msgid "Enter the new topic:" msgstr "輸入新話題:" #: protocols/irc/ircchannelcontact.cpp:471 msgid "You must be a channel operator on %1 to do that." msgstr "您必需是 %1 的頻道管理者才能進行此動作。" #: protocols/irc/ircchannelcontact.cpp:486 msgid "%1 has changed the topic to: %2" msgstr "%1 將標題更換為:%2" #: protocols/irc/ircchannelcontact.cpp:497 msgid "Topic set by %1 at %2" msgstr "%1 於 %2 設定標題" #: protocols/irc/ircchannelcontact.cpp:506 msgid "%1 sets mode %2 on %3" msgstr "%1 將 %3 模式設定為 %2" #: protocols/irc/ircchannelcontact.cpp:567 msgid "You can not join %1 because you have been banned." msgstr "您無法加入 %1,因為您已經被列入黑名單。" #: protocols/irc/ircchannelcontact.cpp:575 msgid "" "You can not join %1 because it is set to invite only, and no one has " "invited you." msgstr "您無法加入 %1,因為沒有被邀請。" #: protocols/irc/ircchannelcontact.cpp:582 msgid "You can not join %1 because it has reached its user limit." msgstr "您無法加入 %1,因為使用者數量已達上限。" #: protocols/irc/ircchannelcontact.cpp:590 msgid "Please enter key for channel %1: " msgstr "請輸入頻道 %1 的密碼:" #: protocols/irc/ircchannelcontact.cpp:661 #: protocols/jabber/ui/dlgchatjoin.ui:88 #: protocols/jabber/ui/dlgchatroomslist.ui:128 #, no-c-format msgid "&Join" msgstr "加入(&J)" #: protocols/irc/ircchannelcontact.cpp:662 msgid "&Part" msgstr "離開(&P)" #: protocols/irc/ircchannelcontact.cpp:663 msgid "Change &Topic..." msgstr "變更標題(&T)..." #: protocols/irc/ircchannelcontact.cpp:664 msgid "Channel Modes" msgstr "頻道模式" #: protocols/irc/ircchannelcontact.cpp:668 msgid "Visit &Homepage" msgstr "參觀網頁(&H)" #: protocols/irc/ircchannelcontact.cpp:683 protocols/irc/ircusercontact.cpp:569 msgid "&Encoding" msgstr "編碼(&E)" #: protocols/irc/irccontact.cpp:189 msgid "Quit: \"%1\" " msgstr "離開:%1" #: protocols/irc/ircprotocol.cpp:121 protocols/irc/ircprotocol.cpp:127 msgid "Op" msgstr "管理者" #: protocols/irc/ircprotocol.cpp:133 msgid "Voice" msgstr "可交談" #: protocols/irc/ircprotocol.cpp:152 protocols/irc/ui/channellist.cpp:193 #: protocols/irc/ui/channellist.cpp:213 msgid "Topic" msgstr "主題" #: protocols/groupwise/ui/gwchatsearchwidget.ui:44 #: protocols/irc/ircprotocol.cpp:153 #, no-c-format msgid "Members" msgstr "成員" #: protocols/irc/ircprotocol.cpp:154 msgid "Home Page" msgstr "個人首頁" #: protocols/irc/ircprotocol.cpp:156 msgid "IRC User" msgstr "IRC 使用者" #: protocols/irc/ircprotocol.cpp:157 msgid "IRC Server" msgstr "IRC 伺服器" #: protocols/irc/ircprotocol.cpp:158 msgid "IRC Channels" msgstr "IRC 頻道" #: protocols/irc/ircprotocol.cpp:159 msgid "IRC Hops" msgstr "IRC 副管理員" #: protocols/irc/ircprotocol.cpp:161 msgid "User Is Authenticated" msgstr "使用者已認證" #: protocols/irc/ircprotocol.cpp:173 msgid "USAGE: /raw - Sends the text in raw form to the server." msgstr "用法: /raw <文字> - 將文字以原始形式送到伺服器。" #: protocols/irc/ircprotocol.cpp:177 msgid "USAGE: /quote - Sends the text in quoted form to the server." msgstr "用法:/quote <文字> - 將文字以引言形式送到伺服器" #: protocols/irc/ircprotocol.cpp:181 msgid "USAGE: /ctcp - Send the CTCP message to nick." msgstr "用法:/ctcp <暱稱> <訊息> - 送出 CTCP 訊息給某人。" #: protocols/irc/ircprotocol.cpp:185 msgid "USAGE: /ping - Alias for /CTCP PING." msgstr "用法:/ping <暱稱> - 就是 /CTCP <暱稱> PING" #: protocols/irc/ircprotocol.cpp:189 msgid "" "USAGE: /motd [] - Shows the message of the day for the current or " "the given server." msgstr "用法:/motd [<伺服器>] - 顯示此伺服器的本日訊息。" #: protocols/irc/ircprotocol.cpp:193 msgid "USAGE: /list - List the public channels on the server." msgstr "用法:/list - 列出伺服器上的公開頻道。" #: protocols/irc/ircprotocol.cpp:197 msgid "USAGE: /join <#channel 1> [] - Joins the specified channel." msgstr "用法:/join <#頻道 1> [<密碼>] - 加入指定的頻道。" #: protocols/irc/ircprotocol.cpp:201 msgid "" "USAGE: /topic [] - Sets and/or displays the topic for the active " "channel." msgstr "用法:/topic [<標題>] - 設定或顯示目前頻道的標題。" #: protocols/irc/ircprotocol.cpp:206 msgid "USAGE: /whois - Display whois info on this user." msgstr "用法:/whois <暱稱> - 顯示此使用者的目前個人資訊。" #: protocols/irc/ircprotocol.cpp:210 msgid "USAGE: /whowas - Display whowas info on this user." msgstr "用法:/whowas <暱稱> - 顯示先前使用此暱稱的使用者的個人資訊。" #: protocols/irc/ircprotocol.cpp:214 msgid "USAGE: /who - Display who info on this user/channel." msgstr "" "用法:/who <暱稱或頻道名稱> - 顯示此使用者的資訊或是此頻道的使用者資訊。" #: protocols/irc/ircprotocol.cpp:218 msgid "" "USAGE: /query [] - Open a private chat with this user." msgstr "用法:/query <暱稱> [<訊息>] - 開啟與此使用者的秘密對話。" #: protocols/irc/ircprotocol.cpp:222 msgid "USAGE: /mode - Set modes on the given channel." msgstr "用法:/mode <頻道> <模式> - 設定此頻道的模式。" #: protocols/irc/ircprotocol.cpp:226 msgid "USAGE: /nick - Change your nickname to the given one." msgstr "用法:/nick <暱稱> - 變更您的暱稱。" #: protocols/irc/ircprotocol.cpp:230 msgid "USAGE: /me - Do something." msgstr "用法:/me <動作> - 做某些動作。" #: protocols/irc/ircprotocol.cpp:234 msgid "USAGE: /ame - Do something in every open chat." msgstr "用法:/ame <動作> - 在每個開啟的聊天室中做某個動作。" #: protocols/irc/ircprotocol.cpp:238 msgid "" "USAGE: /kick [] - Kick someone from the channel (requires " "operator status)." msgstr "" "用法:/kick <暱稱> [<理由>] - 將某人從頻道中踢出去。需要管理者的權限才能執行" "此動作。" #: protocols/irc/ircprotocol.cpp:243 msgid "" "USAGE: /ban - Add someone to this channel's ban list. (requires " "operator status)." msgstr "" "用法:/ban <遮罩> - 將某人加入此頻道的黑名單中。需要管理者權限才能執行此動" "作。" #: protocols/irc/ircprotocol.cpp:248 msgid "" "USAGE: /bannick - Add someone to this channel's ban list. Uses " "the hostmask nickname!*@* (requires operator status)." msgstr "" "用法:/bannick <暱稱> - 將某人加入此頻道的黑名單中,遮罩設為 nickname!*@*。需" "要管理者權限才能執行此動作。" #: protocols/irc/ircprotocol.cpp:252 msgid "" "USAGE: /op [ <...>] - Give channel operator status " "to someone (requires operator status)." msgstr "" "用法:/op <暱稱 1> [<暱稱 2> <...>] - 給這些人此頻道的管理者權限。需要管理者" "權限才能執行此動作。" #: protocols/irc/ircprotocol.cpp:257 msgid "" "USAGE: /deop [ <...>]- Remove channel operator status " "from someone (requires operator status)." msgstr "" "用法:/deop <暱稱> [<暱稱 2> <...>] - 將這些人的管理權限拔除。需要管理者權限" "才能執行此動作。" #: protocols/irc/ircprotocol.cpp:261 msgid "" "USAGE: /voice [ <...>]- Give channel voice status to " "someone (requires operator status)." msgstr "" "用法:/voice <暱稱> [<暱稱 2> <...>] - 將這些人設為可交談。需要管理者權限才能" "執行此動作。" #: protocols/irc/ircprotocol.cpp:266 msgid "" "USAGE: /devoice [ <...>]- Remove channel voice status " "from someone (requires operator status)." msgstr "" "用法:/devoice <暱稱> [<暱稱 2> <...>] - 將這些人設為不可交談。需要管理者權限" "才能執行此動作。" #: protocols/irc/ircprotocol.cpp:270 msgid "" "USAGE: /quit [] - Disconnect from IRC, optionally leaving a message." msgstr "用法:/quit [<理由>] - 從 IRC 離開,並留下訊息。" #: protocols/irc/ircprotocol.cpp:274 msgid "" "USAGE: /part [] - Part from a channel, optionally leaving a message." msgstr "用法:/part [<理由>] - 從頻道離開,並留下訊息。" #: protocols/irc/ircprotocol.cpp:278 msgid "" "USAGE: /invite [] - Invite a user to join a channel." msgstr "用法:/invite <暱稱> [<頻道>] - 邀請某使用者加入某個頻道。" #: protocols/irc/ircprotocol.cpp:282 msgid "USAGE: /j <#channel 1> [] - Alias for JOIN." msgstr "用法:/j <#頻道 1> [<密碼>] - 就是 /JOIN。" #: protocols/irc/ircprotocol.cpp:287 msgid "" "USAGE: /msg [] - Alias for QUERY ." msgstr "用法:/msn <暱稱> [<頻道>] - 就是 /QUERY。" #: protocols/irc/ircprotocol.cpp:457 protocols/irc/ircprotocol.cpp:472 msgid "You must enter some text to send to the server." msgstr "您必須輸入文字才能送到伺服器。" #: protocols/irc/ircprotocol.cpp:521 protocols/irc/ircprotocol.cpp:721 msgid "You must be in a channel to use this command." msgstr "您必須在頻道之內才能使用此命令。" #: protocols/irc/ircprotocol.cpp:578 protocols/irc/ircprotocol.cpp:682 #: protocols/irc/ircprotocol.cpp:699 protocols/irc/ircprotocol.cpp:764 msgid "You must be a channel operator to perform this operation." msgstr "您必須是頻道管理者才能執行此動作。" #: protocols/irc/ircprotocol.cpp:602 msgid "" "\"%1\" is an invalid nickname. Nicknames must not start with '#','!','+', or " "'&'." msgstr "%1 為不合法的暱稱。暱稱不能以 #、!、+ 或 & 開頭。" #: protocols/irc/ircprotocol.cpp:919 msgid "" "Are you sure you want to delete the network %1?
Any accounts " "which use this network will have to be modified.
" msgstr "" "您確定您要刪除網路 %1
任何使用此網路的帳號都會跟著改變。" #: protocols/irc/ircprotocol.cpp:921 msgid "Deleting Network" msgstr "刪除網路中" #: protocols/irc/ircprotocol.cpp:922 msgid "&Delete Network" msgstr "刪除網路(&D)" #: protocols/irc/ircprotocol.cpp:946 msgid "Are you sure you want to delete the host %1?" msgstr "您確定您要刪除主機 %1" #: protocols/irc/ircprotocol.cpp:947 msgid "Deleting Host" msgstr "刪除主機中" #: protocols/irc/ircprotocol.cpp:948 msgid "&Delete Host" msgstr "刪除主機(&D)" #: protocols/irc/ircprotocol.cpp:1001 msgid "New Host" msgstr "新增主機" #: protocols/irc/ircprotocol.cpp:1002 msgid "Enter the hostname of the new server:" msgstr "輸入新伺服器的主機名稱:" #: protocols/irc/ircprotocol.cpp:1009 msgid "A host already exists with that name" msgstr "此主機已存在" #: protocols/irc/ircprotocol.cpp:1039 msgid "Rename Network" msgstr "重新命名網路" #: protocols/irc/ircprotocol.cpp:1040 msgid "Enter the new name for this network:" msgstr "輸入此網路的新名稱:" #: protocols/irc/ircprotocol.cpp:1050 msgid "A network already exists with that name" msgstr "此網路名稱已存在" #: protocols/irc/ircservercontact.cpp:95 protocols/irc/ircusercontact.cpp:219 msgid "%1 @ %2" msgstr "%1 @ %2" #: protocols/irc/ircservercontact.cpp:106 msgid "KIRC Error - Parse error: " msgstr "KIRC 錯誤 - 剖析錯誤:" #: protocols/irc/ircservercontact.cpp:109 msgid "KIRC Error - Unknown command: " msgstr "KIRC 錯誤 - 未知的指令: " #: protocols/irc/ircservercontact.cpp:112 msgid "KIRC Error - Unknown numeric reply: " msgstr "KIRC 錯誤 - 未知的數值回覆:" #: protocols/irc/ircservercontact.cpp:115 msgid "KIRC Error - Invalid number of arguments: " msgstr "KIRC 錯誤 - 參數數量錯誤:" #: protocols/irc/ircservercontact.cpp:118 msgid "KIRC Error - Method failed: " msgstr "KIRC 錯誤 - 方法失敗:" #: protocols/irc/ircservercontact.cpp:121 msgid "KIRC Error - Unknown error: " msgstr "KIRC 錯誤 - 未知的錯誤:" #: protocols/irc/ircservercontact.cpp:131 msgid "" "You can not talk to the server, you can only issue commands here. Type /help " "for supported commands." msgstr "您無法與伺服器交談,您在此只能下命令。/help 可以列出所有支援的命令。" #: protocols/irc/ircservercontact.cpp:150 #: protocols/irc/ircservercontact.cpp:164 msgid "NOTICE from %1: %2" msgstr "來自 %1 的提醒:%2" #: protocols/irc/ircservercontact.cpp:158 msgid "NOTICE from %1 (%2): %3" msgstr "來自 %1(%2)的提醒:%3" #: protocols/irc/ircusercontact.cpp:188 msgid "%1 is away (%2)" msgstr "%1 已離開(%2)" #: protocols/irc/ircusercontact.cpp:417 msgid "True" msgstr "真" #: protocols/irc/ircusercontact.cpp:435 msgid "%1 is (%2@%3): %4
" msgstr "%1 為 (%2@%3):%4
" #: protocols/irc/ircusercontact.cpp:442 msgid "%1 is authenticated with NICKSERV
" msgstr "%1 以經由 NICKSERV 認證
" #: protocols/irc/ircusercontact.cpp:445 msgid "%1 is an IRC operator
" msgstr "%1 為 IRC 頻道管理員
" #: protocols/irc/ircusercontact.cpp:448 msgid "on channels %1
" msgstr "於頻道 %1
" #: protocols/irc/ircusercontact.cpp:451 msgid "on IRC via server %1 ( %2 )
" msgstr "於 IRC 伺服器 %1 (%2)
" #: protocols/irc/ircusercontact.cpp:455 msgid "idle: %2
" msgstr "閒置:%2
" #: protocols/irc/ircusercontact.cpp:468 msgid "%1 was (%2@%3): %4\n" msgstr "%1 為(%2@%3):%4\n" #: protocols/irc/ircusercontact.cpp:474 msgid "Last Online: %1\n" msgstr "最後上線:%1\n" #: protocols/irc/ircusercontact.cpp:538 msgid "C&TCP" msgstr "CTCP(&T)" #: protocols/irc/ircusercontact.cpp:539 msgid "&Version" msgstr "版本(&V)" #: protocols/irc/ircusercontact.cpp:541 msgid "&Ping" msgstr "Ping(&P)" #: protocols/irc/ircusercontact.cpp:544 msgid "&Modes" msgstr "模式(&M)" #: protocols/irc/ircusercontact.cpp:545 msgid "&Op" msgstr "管理員(&O)" #: protocols/irc/ircusercontact.cpp:547 msgid "&Deop" msgstr "解除管理(&D)" #: protocols/irc/ircusercontact.cpp:549 msgid "&Voice" msgstr "可聊天(&V)" #: protocols/irc/ircusercontact.cpp:551 msgid "Devoice" msgstr "不可聊天" #: protocols/irc/ircusercontact.cpp:555 msgid "&Kick" msgstr "踢出(&K)" #: protocols/irc/ircusercontact.cpp:558 msgid "&Ban" msgstr "黑名單(&B)" #: protocols/irc/ircusercontact.cpp:559 msgid "Host (*!*@host.domain.net)" msgstr "主機 (*!*@host.domain.net)" #: protocols/irc/ircusercontact.cpp:561 msgid "Domain (*!*@*.domain.net)" msgstr "網域 (*!*@*.domain.net)" #: protocols/irc/ircusercontact.cpp:563 msgid "User@Host (*!*user@host.domain.net)" msgstr "User@Host (*!*user@host.domain.net)" #: protocols/irc/ircusercontact.cpp:565 msgid "User@Domain (*!*user@*.domain.net)" msgstr "User@Domain (*!*user@*.domain.net)" #: protocols/irc/libkirc/kirctransfer.cpp:359 msgid "Acknowledge size is greater than the expected file size" msgstr "確認(Acknowledge)的大小比預期的檔案大小還大。" #: protocols/irc/libkirc/ksslsocket.cpp:371 msgid "" "The IP address of the host %1 does not match the one the certificate was " "issued to." msgstr "主機 %1 的 IP 與憑證中的不符。" #: protocols/irc/libkirc/ksslsocket.cpp:376 #: protocols/irc/libkirc/ksslsocket.cpp:386 #: protocols/irc/libkirc/ksslsocket.cpp:407 msgid "Server Authentication" msgstr "伺服器認證" #: protocols/irc/libkirc/ksslsocket.cpp:377 #: protocols/irc/libkirc/ksslsocket.cpp:387 msgid "&Details" msgstr "細節(&D)" #: protocols/irc/libkirc/ksslsocket.cpp:378 #: protocols/irc/libkirc/ksslsocket.cpp:388 msgid "Co&ntinue" msgstr "繼續(&N)" #: protocols/irc/libkirc/ksslsocket.cpp:382 msgid "The server certificate failed the authenticity test (%1)." msgstr "伺服器憑證未通過認證測試(%1)。" #: protocols/irc/libkirc/ksslsocket.cpp:404 msgid "" "Would you like to accept this certificate forever without being prompted?" msgstr "您要永久接受這個憑證嗎?" #: protocols/irc/libkirc/ksslsocket.cpp:408 msgid "&Forever" msgstr "永久接受(&F)" #: protocols/irc/libkirc/ksslsocket.cpp:409 msgid "&Current Sessions Only" msgstr "只在這個連線接受(&C)" #: protocols/irc/ui/channellist.cpp:182 msgid " members" msgstr " 名成員" #: protocols/irc/ui/channellist.cpp:190 protocols/irc/ui/channellist.cpp:211 msgid "Channel" msgstr "頻道" #: protocols/irc/ui/channellist.cpp:191 protocols/irc/ui/channellist.cpp:212 msgid "Users" msgstr "使用者" #: protocols/irc/ui/channellist.cpp:200 msgid "Search for:" msgstr "我想找:" #: protocols/irc/ui/channellist.cpp:201 protocols/irc/ui/channellist.cpp:205 msgid "" "You may search for channels on the IRC server for a text string entered here." msgstr "您可以輸入您要搜尋的 IRC 伺盧器上的頻道名稱。" #: protocols/irc/ui/channellist.cpp:202 protocols/irc/ui/channellist.cpp:203 msgid "Channels returned must have at least this many members." msgstr "要搜尋至少有多少成員的頻道。" #: protocols/irc/ui/channellist.cpp:204 protocols/irc/ui/channellist.cpp:206 msgid "" "You may search for channels on the IRC server for a text string entered " "here. For instance, you may type 'linux' to find channels that have " "something to do with linux." msgstr "" "您可以輸入您要搜尋的 IRC 伺盧器上的頻道名稱。例如,您可以輸入 linux 來尋找某" "些討論 linux 的頻道。" #: protocols/irc/ui/channellist.cpp:208 msgid "Perform a channel search." msgstr "執行頻道搜尋。" #: protocols/irc/ui/channellist.cpp:209 msgid "" "Perform a channel search. Please be patient, as this can be slow depending " "on the number of channels on the server." msgstr "執行頻道搜尋。請保持耐心,這有可能會很慢,依伺服器上頻道總數而定。" #: protocols/irc/ui/channellist.cpp:210 msgid "Double click on a channel to select it." msgstr "雙擊某頻道以選擇。" #: protocols/irc/ui/channellist.cpp:255 msgid "You have been disconnected from the IRC server." msgstr "您已經中斷與此 IRC 伺服器的連線。" #: protocols/irc/ui/channellist.cpp:256 msgid "Disconnected" msgstr "已斷線" #: protocols/irc/ui/channellist.cpp:303 msgid "You must be connected to the IRC server to perform a channel listing." msgstr "您必須先連線到 IRC 伺服器,才能列出頻道。" #: protocols/irc/ui/irceditaccountwidget.cpp:177 msgid "Remove Command" msgstr "移除命令" #: protocols/irc/ui/irceditaccountwidget.cpp:185 msgid "Remove CTCP Reply" msgstr "移除 CTCP 回覆" #: protocols/irc/ui/irceditaccountwidget.cpp:275 msgid "You must enter a nickname." msgstr "您必須輸入暱稱。" #: protocols/jabber/jabberaccount.cpp:166 msgid "" "Could not bind Jabber file transfer manager to local port. Please check if " "the file transfer port is already in use or choose another port in the " "account settings." msgstr "" "無法將 Jabber 檔案傳輸管理員與本地端連接埠配對。請檢查是否檔案傳輸連接埠已經" "在使用中,或是在帳號設定中選擇另一個連接埠。" #: protocols/jabber/jabberaccount.cpp:167 msgid "Failed to start Jabber File Transfer Manager" msgstr "無法開始 Jabber 檔案傳輸管理員" #: protocols/jabber/jabberaccount.cpp:181 msgid "Join Groupchat..." msgstr "加入群組聊天..." #: protocols/jabber/jabberaccount.cpp:192 msgid "Services..." msgstr "服務..." #: protocols/jabber/jabberaccount.cpp:197 msgid "Send Raw Packet to Server..." msgstr "傳送原始封包到伺服器..." #: protocols/jabber/jabberaccount.cpp:202 msgid "Edit User Info..." msgstr "編輯使用者資訊..." #: protocols/jabber/jabberaccount.cpp:259 msgid "Please connect first." msgstr "請先連線。" #: protocols/jabber/jabberaccount.cpp:259 #: protocols/jabber/ui/dlgjabberbrowse.cpp:63 #: protocols/jabber/ui/dlgjabberchatroomslist.cpp:89 #: protocols/jabber/ui/dlgjabberregister.cpp:53 #: protocols/jabber/ui/dlgjabberservices.cpp:125 msgid "Jabber Error" msgstr "Jabber 錯誤" #: protocols/jabber/jabberaccount.cpp:430 #: protocols/jabber/ui/jabberregisteraccount.cpp:272 msgid "Jabber SSL Error" msgstr "Jabber SSL 錯誤" #: protocols/jabber/jabberaccount.cpp:512 msgid "" "

The certificate of server %1 could not be validated for account %2: " "%3

Do you want to continue?

" msgstr "" "

伺服器 %1 的憑證無法被帳號 %2 確認:%3。

您確定要繼續嗎?

" #: protocols/jabber/jabberaccount.cpp:514 msgid "Jabber Connection Certificate Problem" msgstr "Jabber 連線憑證發生問題" #: protocols/jabber/jabberaccount.cpp:546 msgid "" "An encrypted connection with the Jabber server could not be established." msgstr "無法建立與 Jabber 伺服器的加密連線。" #: protocols/jabber/jabberaccount.cpp:547 msgid "Jabber Connection Error" msgstr "Jabber 連線錯誤" #: protocols/jabber/jabberaccount.cpp:747 msgid "Malformed packet received." msgstr "接收到不正確的封包。" #: protocols/jabber/jabberaccount.cpp:752 msgid "There was an unrecoverable error in the protocol." msgstr "無法在協定中修復此錯誤。" #: protocols/jabber/jabberaccount.cpp:759 msgid "Generic stream error (sorry, I do not have a more-detailed reason)" msgstr "一般的串流錯誤(抱歉,沒有更詳盡的理由)" #: protocols/jabber/jabberaccount.cpp:763 msgid "There was a conflict in the information received." msgstr "接收到的資訊有衝突。" #: protocols/jabber/jabberaccount.cpp:766 msgid "The stream timed out." msgstr "串流已逾時。" #: protocols/jabber/jabberaccount.cpp:769 msgid "Internal server error." msgstr "內部伺服器錯誤。" #: protocols/jabber/jabberaccount.cpp:772 msgid "Stream packet received from an invalid address." msgstr "由不正確的地址傳來的串流封包。" #: protocols/jabber/jabberaccount.cpp:775 msgid "Malformed stream packet received." msgstr "接收到不正確的串流封包。" #: protocols/jabber/jabberaccount.cpp:779 msgid "Policy violation in the protocol stream." msgstr "協定串流違反了政策。" #: protocols/jabber/jabberaccount.cpp:783 msgid "Resource constraint." msgstr "資源限制。" #: protocols/jabber/jabberaccount.cpp:787 msgid "System shutdown." msgstr "系統已關閉。" #: protocols/jabber/jabberaccount.cpp:790 msgid "Unknown reason." msgstr "未知的理由。" #: protocols/jabber/jabberaccount.cpp:794 #, c-format msgid "There was an error in the protocol stream: %1" msgstr "協定串流中發生錯誤:%1" #: protocols/jabber/jabberaccount.cpp:802 msgid "Host not found." msgstr "找不到主機。" #: protocols/jabber/jabberaccount.cpp:805 msgid "Address is already in use." msgstr "地址已在使用中。" #: protocols/jabber/jabberaccount.cpp:808 msgid "Cannot recreate the socket." msgstr "無法重建 socket。" #: protocols/jabber/jabberaccount.cpp:811 msgid "Cannot bind the socket again." msgstr "無法重新結合 socket。" #: protocols/jabber/jabberaccount.cpp:814 msgid "Socket is already connected." msgstr "Socket 已連接。" #: protocols/jabber/jabberaccount.cpp:817 msgid "Socket is not connected." msgstr "Socket 未連接。" #: protocols/jabber/jabberaccount.cpp:820 msgid "Socket is not bound." msgstr "Socket 未結合。" #: protocols/jabber/jabberaccount.cpp:823 msgid "Socket has not been created." msgstr "Socket 未建立。" #: protocols/jabber/jabberaccount.cpp:826 msgid "" "Socket operation would block. You should not see this error, please use " "\"Report Bug\" from the Help menu." msgstr "Socket 運作為阻斷式。您不應看到此訊息,請回報錯誤。" #: protocols/jabber/jabberaccount.cpp:829 msgid "Connection refused." msgstr "連線被拒。" #: protocols/jabber/jabberaccount.cpp:832 msgid "Connection timed out." msgstr "連線逾時。" #: protocols/jabber/jabberaccount.cpp:835 msgid "Connection attempt already in progress." msgstr "已嘗試連線中。" #: protocols/jabber/jabberaccount.cpp:838 msgid "Network failure." msgstr "網路失敗。" #: protocols/jabber/jabberaccount.cpp:841 msgid "Operation is not supported." msgstr "未支援此動作。" #: protocols/jabber/jabberaccount.cpp:844 msgid "Socket timed out." msgstr "Socket 逾時。" #: protocols/jabber/jabberaccount.cpp:852 #, c-format msgid "There was a connection error: %1" msgstr "連線錯誤:%1" #: protocols/jabber/jabberaccount.cpp:860 msgid "Unknown host." msgstr "未知的主機。" #: protocols/jabber/jabberaccount.cpp:864 msgid "Could not connect to a required remote resource." msgstr "無法連接到請求的遠端資源。" #: protocols/jabber/jabberaccount.cpp:867 msgid "" "It appears we have been redirected to another server; I do not know how to " "handle this." msgstr "我們似乎被導向到另一台伺服器。我不知道怎麼處理。" #: protocols/jabber/jabberaccount.cpp:870 msgid "Unsupported protocol version." msgstr "未支援的協定版本。" #: protocols/jabber/jabberaccount.cpp:873 #: protocols/jabber/jabberaccount.cpp:890 #: protocols/jabber/jabberaccount.cpp:934 #: protocols/jabber/jabberaccount.cpp:951 #: protocols/jabber/jabberaccount.cpp:968 #: protocols/jabber/jabberaccount.cpp:976 msgid "Unknown error." msgstr "未知的錯誤。" #: protocols/jabber/jabberaccount.cpp:877 #, c-format msgid "There was a negotiation error: %1" msgstr "交涉錯誤:%1" #: protocols/jabber/jabberaccount.cpp:884 msgid "Server rejected our request to start the TLS handshake." msgstr "伺服器拒絕我們開始 TLS 互動的請求。" #: protocols/jabber/jabberaccount.cpp:887 msgid "Failed to establish a secure connection." msgstr "建立秘密連線失敗。" #: protocols/jabber/jabberaccount.cpp:894 #, c-format msgid "There was a Transport Layer Security (TLS) error: %1" msgstr "TLS 錯誤:%1" #: protocols/jabber/jabberaccount.cpp:901 msgid "Login failed with unknown reason." msgstr "登入失敗,理由未知。" #: protocols/jabber/jabberaccount.cpp:904 msgid "No appropriate authentication mechanism available." msgstr "沒有適當的認證機制。" #: protocols/jabber/jabberaccount.cpp:907 msgid "Bad SASL authentication protocol." msgstr "錯誤的 SASL 認證協定。" #: protocols/jabber/jabberaccount.cpp:910 msgid "Server failed mutual authentication." msgstr "伺服器相互認證失敗。" #: protocols/jabber/jabberaccount.cpp:913 msgid "Encryption is required but not present." msgstr "必須加密,但無法加密。" #: protocols/jabber/jabberaccount.cpp:916 msgid "Invalid user ID." msgstr "不合法的使用者代號。" #: protocols/jabber/jabberaccount.cpp:919 msgid "Invalid mechanism." msgstr "不合法的機制。" #: protocols/jabber/jabberaccount.cpp:922 msgid "Invalid realm." msgstr "不合法的領域。" #: protocols/jabber/jabberaccount.cpp:925 msgid "Mechanism too weak." msgstr "機制太薄弱。" #: protocols/jabber/jabberaccount.cpp:928 msgid "Wrong credentials supplied. (check your user ID and password)" msgstr "使用者代號或密碼錯誤" #: protocols/jabber/jabberaccount.cpp:931 msgid "Temporary failure, please try again later." msgstr "暫時失敗,請稍後再試。" #: protocols/jabber/jabberaccount.cpp:938 #, c-format msgid "There was an error authenticating with the server: %1" msgstr "與伺服器認證時失敗:%1" #: protocols/jabber/jabberaccount.cpp:945 msgid "Transport Layer Security (TLS) problem." msgstr "TLS 的問題。" #: protocols/jabber/jabberaccount.cpp:948 msgid "Simple Authentication and Security Layer (SASL) problem." msgstr "SASL 的問題。" #: protocols/jabber/jabberaccount.cpp:955 #, c-format msgid "There was an error in the security layer: %1" msgstr "安全性層級的錯誤:%1" #: protocols/jabber/jabberaccount.cpp:962 msgid "No permission to bind the resource." msgstr "不允許結合此資源。" #: protocols/jabber/jabberaccount.cpp:965 msgid "The resource is already in use." msgstr "此資源已在使用中。" #: protocols/jabber/jabberaccount.cpp:972 #, c-format msgid "Could not bind a resource: %1" msgstr "無法結合資源:%1" #: protocols/jabber/jabberaccount.cpp:988 #, c-format msgid "Connection problem with Jabber server %1" msgstr "連線到 Jabber 伺服器 %1 時發生問題" #: protocols/jabber/jabberaccount.cpp:1126 msgid "" "The Jabber user %1 removed %2's subscription to them. This account will no " "longer be able to view their online/offline status. Do you want to delete " "the contact?" msgstr "" "Jabber 使用者 %1 已移除 %2 的同意。此帳號將無法再看到他們的上線/離線狀態。您" "要刪除此聯絡人嗎?" #: protocols/jabber/jabberaccount.cpp:1306 msgid "Waiting for authorization" msgstr "等待認證" #: protocols/jabber/jabberaccount.cpp:1519 #, c-format msgid "A password is required to join the room %1." msgstr "加入聊天室 %1 需要密碼。" #: protocols/jabber/jabberaccount.cpp:1528 msgid "Error trying to join %1 : nickname %2 is already in use" msgstr "加入 %1 時發生錯誤:暱稱 %2 已經被使用了" #: protocols/jabber/jabberaccount.cpp:1529 msgid "Give your nickname" msgstr "請輸入您的暱稱" #: protocols/jabber/jabberaccount.cpp:1542 msgid "You can't join the room %1 because you were banned" msgstr "您無法加入 %1,因為您已經被列入黑名單。" #: protocols/jabber/jabberaccount.cpp:1543 #: protocols/jabber/jabberaccount.cpp:1550 #: protocols/jabber/jabberaccount.cpp:1560 msgid "Jabber Group Chat" msgstr "Jabber 群組聊天" #: protocols/jabber/jabberaccount.cpp:1549 msgid "You can't join the room %1 because the maximum users has been reached" msgstr "您無法加入聊天室 %1,因為裡面被塞爆了。" #: protocols/jabber/jabberaccount.cpp:1555 msgid "No reason given by the server" msgstr "伺服器未給理由" #: protocols/jabber/jabberaccount.cpp:1559 msgid "" "There was an error processing your request for group chat %1. (Reason: %2, " "Code %3)" msgstr "處理您對群組聊天 %1 的要求時發生錯誤。(理由:%2,代碼 %3)" #: protocols/jabber/jabberaccount.cpp:1692 msgid "" "Do you want to also unregister \"%1\" from the Jabber server ?\n" "If you unregister, all your contact list may be removed on the server,And " "you will never be able to connect to this account with any client" msgstr "" "您也要從 Jabber 伺服器中解除 %1 註冊嗎?\n" "如果您解除註冊,您所有的聯絡人清單都會從伺服器上移除。您將無法再使用此帳號連" "線。" #: protocols/jabber/jabberaccount.cpp:1695 msgid "Unregister" msgstr "解除註冊" #: protocols/jabber/jabberaccount.cpp:1696 msgid "Remove and Unregister" msgstr "移除並解除註冊" #: protocols/jabber/jabberaccount.cpp:1697 msgid "Remove from kopete only" msgstr "只從 kopete 移除" #: protocols/jabber/jabberaccount.cpp:1741 #, c-format msgid "" "An error occured when trying to remove the account:\n" "%1" msgstr "移除此帳號時發生錯誤:%1" #: protocols/jabber/jabberaccount.cpp:1742 msgid "Jabber Account Unregistration" msgstr "Jabber 帳號解除註冊" #: protocols/jabber/jabberbasecontact.cpp:133 msgid "You cannot see each others' status." msgstr "您們無法看到彼此的狀態。" #: protocols/jabber/jabberbasecontact.cpp:137 msgid "You can see this contact's status but they cannot see your status." msgstr "您可以看到此聯絡人的狀態,但是他們看不到您的狀態。" #: protocols/jabber/jabberbasecontact.cpp:141 msgid "This contact can see your status but you cannot see their status." msgstr "此聯絡人可以看到您的狀態,但您無法看到他的。" #: protocols/jabber/jabberbasecontact.cpp:145 msgid "You can see each others' status." msgstr "您們可以看到彼此的狀態。" #: protocols/jabber/jabberbasecontact.cpp:255 msgid "Client" msgstr "客戶端" #: protocols/jabber/jabberbasecontact.cpp:280 msgid "Timestamp" msgstr "時間" #: protocols/jabber/jabberbasecontact.cpp:287 msgid "Message" msgstr "訊息" #: protocols/jabber/jabberbasecontact.cpp:651 #: protocols/jabber/ui/dlgjabbervcard.cpp:480 msgid "Downloading of Jabber contact photo failed!" msgstr "下載 Jabber 聯絡人圖片時失敗。" #: protocols/jabber/jabberbookmarks.cpp:132 msgid "Groupchat bookmark" msgstr "Groupchat 書籤" #: protocols/jabber/jabberchatsession.cpp:68 #: protocols/jabber/jabbercontact.cpp:233 msgid "Voice call" msgstr "語音呼叫" #: protocols/jabber/jabberchatsession.cpp:88 #: protocols/yahoo/yahoochatsession.cpp:60 msgid "Send File" msgstr "傳送檔案" #: protocols/jabber/jabberchatsession.cpp:120 msgid "" "_: a contact's online status in parenthesis.\n" " (%1)" msgstr " (%1)" #: protocols/jabber/jabberchatsession.cpp:267 #: protocols/jabber/jabbergroupchatmanager.cpp:103 msgid "This message is encrypted." msgstr "訊息已加密。" #: protocols/jabber/jabbercontact.cpp:135 msgid "Authorization" msgstr "認證" #: protocols/jabber/jabbercontact.cpp:139 msgid "(Re)send Authorization To" msgstr "(重新)送出認證到" #: protocols/jabber/jabbercontact.cpp:144 msgid "(Re)request Authorization From" msgstr "(重新)要求認證從" #: protocols/jabber/jabbercontact.cpp:149 msgid "Remove Authorization From" msgstr "移除認證從" #: protocols/jabber/jabbercontact.cpp:154 msgid "Set Availability" msgstr "設定可效性" #: protocols/jabber/jabbercontact.cpp:158 msgid "Free to Chat" msgstr "有空聊天" #: protocols/jabber/jabbercontact.cpp:162 #: protocols/jabber/jabberprotocol.cpp:77 msgid "Extended Away" msgstr "離開(進階)" #: protocols/jabber/jabbercontact.cpp:164 #: protocols/oscar/icq/icqpresence.cpp:72 msgid "Do Not Disturb" msgstr "請勿打擾" #: protocols/jabber/jabbercontact.cpp:169 msgid "Select Resource" msgstr "選擇資源" #: protocols/jabber/jabbercontact.cpp:186 msgid "Automatic (best/default resource)" msgstr "自動(最佳/預設資源)" #: protocols/jabber/jabbercontact.cpp:266 msgid "The original message is : \" %1 \"
" msgstr "原始訊息為:「%1」
" #: protocols/jabber/jabbercontact.cpp:267 msgid "" "%1 invited you to join the conference %2
%3
If you " "want to accept and join, just enter your nickname and press ok
If " "you want to decline, press cancel
" msgstr "" "%1 邀請您加入會議 %2
%3
如果您要接受邀請並加入,只" "要輸入您的暱稱然後按下確定。
如果您要拒絕,請按下取消。
" #: protocols/jabber/jabbercontact.cpp:273 msgid "Invited to a conference - Jabber Plugin" msgstr "受邀參加會議 - Jabber 外掛程式" #: protocols/jabber/jabbercontact.cpp:290 msgid "Message has been displayed" msgstr "訊息已顯示" #: protocols/jabber/jabbercontact.cpp:292 msgid "Message has been delivered" msgstr "訊息已送達" #: protocols/jabber/jabbercontact.cpp:295 msgid "Message stored on the server, contact offline" msgstr "由於聯絡人離線,訊息儲存在伺服器上。" #: protocols/jabber/jabbercontact.cpp:302 msgid "%1 has ended their participation in the chat session." msgstr "%1 已結束了此次聊天。" #: protocols/jabber/jabbercontact.cpp:340 #: protocols/jabber/jabbergroupcontact.cpp:164 #: protocols/jabber/jabbergroupmembercontact.cpp:120 msgid "Your message could not be delivered: \"%1\", Reason: \"%2\"" msgstr "您的訊息「%1」無法送達。理由:%2" #: protocols/jabber/jabbercontact.cpp:919 msgid "" "Do you also want to remove the authorization from user %1 to see your status?" msgstr "您也要移除使用者 %1 看到您的狀態的認證嗎?" #: protocols/jabber/jabbercontact.cpp:1089 msgid "" "You have preselected a resource for contact %1, but you still have open chat " "windows for this contact. The preselected resource will only apply to newly " "opened chat windows." msgstr "" "您已經預先選擇聯絡人 %1 的資源,但是已經有與此聯絡人聊天的視窗了。預先選擇的" "資源只會在新視窗中生效。" #: protocols/jabber/jabbercontact.cpp:1093 msgid "Jabber Resource Selector" msgstr "Jabber 資源選擇器" #: protocols/jabber/jabbergroupchatmanager.cpp:148 #, c-format msgid "You have been invited to %1" msgstr "您已受邀至 %1" #: protocols/jabber/jabbergroupcontact.cpp:116 msgid "Change nick name" msgstr "改變暱稱" #: protocols/jabber/jabbergroupcontact.cpp:356 msgid "Change nickanme - Jabber Plugin" msgstr "改變暱稱 - Jabber 外掛程式" #: protocols/jabber/jabbergroupcontact.cpp:357 msgid "Please enter the new nick name you want to have on the room %1" msgstr "請輸入您在聊天室 %1 中使用的新暱稱" #: protocols/jabber/jabberprotocol.cpp:74 msgid "Free for Chat" msgstr "有空聊天" #: protocols/jabber/jabberprotocol.cpp:78 msgid "Do not Disturb" msgstr "請勿打擾" #: protocols/jabber/jabberprotocol.cpp:93 protocols/jabber/ui/dlgsendraw.ui:96 #, no-c-format msgid "Subscription" msgstr "訂閱" #: protocols/jabber/jabberprotocol.cpp:94 msgid "Authorization Status" msgstr "認證狀態" #: protocols/jabber/jabberprotocol.cpp:95 msgid "Available Resources" msgstr "可用資源" #: protocols/jabber/jabberprotocol.cpp:96 msgid "vCard Cache Timestamp" msgstr "vCard 快取時間" #: protocols/jabber/jabberprotocol.cpp:98 msgid "Jabber ID" msgstr "Jabber 代號" #: protocols/jabber/jabberprotocol.cpp:99 protocols/yahoo/yahooprotocol.cpp:94 msgid "Birthday" msgstr "生日" #: protocols/jabber/jabberprotocol.cpp:100 msgid "Timezone" msgstr "時區" #: protocols/jabber/jabberprotocol.cpp:101 msgid "Homepage" msgstr "首頁" #: protocols/jabber/jabberprotocol.cpp:102 msgid "Company name" msgstr "公司名稱" #: protocols/jabber/jabberprotocol.cpp:103 msgid "Company Departement" msgstr "公司部門" #: protocols/jabber/jabberprotocol.cpp:104 msgid "Company Position" msgstr "公司職位" #: protocols/jabber/jabberprotocol.cpp:105 msgid "Company Role" msgstr "公司職責" #: protocols/jabber/jabberprotocol.cpp:106 msgid "Work Street" msgstr "工作地址" #: protocols/jabber/jabberprotocol.cpp:107 msgid "Work Extra Address" msgstr "額外工作地址" #: protocols/jabber/jabberprotocol.cpp:108 msgid "Work PO Box" msgstr "工作郵政信箱" #: protocols/jabber/jabberprotocol.cpp:109 protocols/yahoo/yahooprotocol.cpp:88 msgid "Work City" msgstr "工作城市" #: protocols/jabber/jabberprotocol.cpp:110 msgid "Work Postal Code" msgstr "工作郵遞區號" #: protocols/jabber/jabberprotocol.cpp:111 protocols/yahoo/yahooprotocol.cpp:91 msgid "Work Country" msgstr "工作國家" #: protocols/jabber/jabberprotocol.cpp:112 msgid "Work Email Address" msgstr "工作電子郵件" #: protocols/jabber/jabberprotocol.cpp:113 msgid "Home Street" msgstr "住家地址" #: protocols/jabber/jabberprotocol.cpp:114 msgid "Home Extra Address" msgstr "額外住家地址" #: protocols/jabber/jabberprotocol.cpp:115 msgid "Home PO Box" msgstr "住家郵政信箱" #: protocols/jabber/jabberprotocol.cpp:116 msgid "Home City" msgstr "住家城市" #: protocols/jabber/jabberprotocol.cpp:117 msgid "Home Postal Code" msgstr "住家郵遞區號" #: protocols/jabber/jabberprotocol.cpp:118 msgid "Home Country" msgstr "住家國家" #: protocols/jabber/jabberprotocol.cpp:119 msgid "Fax" msgstr "傳真" #: protocols/jabber/jingle/jinglevoicesessiondialog.cpp:47 #, c-format msgid "Voice session with %1" msgstr "與 %1 進行語音聊天" #: protocols/jabber/jingle/jinglevoicesessiondialog.cpp:72 msgid "Incoming Session..." msgstr "新的階段..." #: protocols/jabber/jingle/jinglevoicesessiondialog.cpp:98 msgid "Waiting for other peer..." msgstr "等待另一端點..." #: protocols/jabber/jingle/jinglevoicesessiondialog.cpp:109 #: protocols/jabber/jingle/jinglevoicesessiondialog.cpp:162 msgid "Session accepted." msgstr "階段已接受。" #: protocols/jabber/jingle/jinglevoicesessiondialog.cpp:121 #: protocols/jabber/jingle/jinglevoicesessiondialog.cpp:174 msgid "Session declined." msgstr "階段已拒絕。" #: protocols/jabber/jingle/jinglevoicesessiondialog.cpp:134 #: protocols/jabber/jingle/jinglevoicesessiondialog.cpp:186 msgid "Session terminated." msgstr "階段已結束。" #: protocols/jabber/jingle/jinglevoicesessiondialog.cpp:150 msgid "Session in progress." msgstr "階段進行中。" #: protocols/jabber/tdeioslave/jabberdisco.cpp:113 #: protocols/jabber/tdeioslave/jabberdisco.cpp:214 msgid "TLS" msgstr "TLS" #: protocols/jabber/tdeioslave/jabberdisco.cpp:192 msgid "The server certificate is invalid. Do you want to continue? " msgstr "這個伺服器認證是不合法的。您確定要繼續嗎?" #: protocols/jabber/tdeioslave/jabberdisco.cpp:193 msgid "Certificate Warning" msgstr "認證警告" #: protocols/jabber/tdeioslave/jabberdisco.cpp:324 msgid "The login details are incorrect. Do you want to try again?" msgstr "登入詳情不正確。您要再試一次嗎?" #: protocols/jabber/ui/dlgjabberbrowse.cpp:63 msgid "Unable to retrieve search form." msgstr "無法取得搜尋表格。" #: protocols/jabber/ui/dlgjabberbrowse.cpp:114 msgid "The Jabber server declined the search." msgstr "Jabber 伺服器拒絕搜尋。" #: protocols/jabber/ui/dlgbrowse.ui:16 #: protocols/jabber/ui/dlgjabberbrowse.cpp:114 #, no-c-format msgid "Jabber Search" msgstr "Jabber 搜尋" #: protocols/jabber/ui/dlgjabberchangepassword.cpp:34 msgid "Change Jabber Password" msgstr "變更 Jabber 密碼" #: protocols/jabber/ui/dlgjabberchangepassword.cpp:56 msgid "You entered your current password incorrectly." msgstr "您輸入的密碼不正確。" #: protocols/jabber/ui/dlgjabberchangepassword.cpp:57 #: protocols/jabber/ui/dlgjabberchangepassword.cpp:65 #: protocols/jabber/ui/dlgjabberchangepassword.cpp:73 msgid "Password Incorrect" msgstr "密碼錯誤" #: protocols/jabber/ui/dlgjabberchangepassword.cpp:64 msgid "Your new passwords do not match. Please enter them again." msgstr "您的新密碼配不起來。請重新輸入。" #: protocols/jabber/ui/dlgjabberchangepassword.cpp:72 msgid "For security reasons, you are not allowed to set an empty password." msgstr "基於安全性考量,您不可以設定空白密碼。" #: protocols/jabber/ui/dlgjabberchangepassword.cpp:80 msgid "" "Your account needs to be connected before the password can be changed. Do " "you want to try to connect now?" msgstr "您要變更密碼,必須先連線。您要現在連線嗎?" #: protocols/jabber/ui/dlgjabberchangepassword.cpp:81 #: protocols/jabber/ui/dlgjabberchangepassword.cpp:121 msgid "Jabber Password Change" msgstr "Jabber 密碼變更" #: protocols/jabber/ui/dlgjabberchangepassword.cpp:120 msgid "" "Your password has been changed successfully. Please note that the change may " "not be instantaneous. If you have problems logging in with your new " "password, please contact the administrator." msgstr "" "您的密碼已成功變更。請注意,此變更不會立刻生效。如果您使用新密碼無法登入,請" "與管理者聯絡。" #: protocols/jabber/ui/dlgjabberchangepassword.cpp:128 msgid "" "Your password could not be changed. Either your server does not support this " "feature or the administrator does not allow you to change your password." msgstr "" "您無法變更密碼。可能是您的伺服器不支援此功能,或是管理者不允許您變更密碼。" #: protocols/jabber/ui/dlgjabberchatjoin.cpp:34 msgid "Join Jabber Groupchat" msgstr "加入 Jabber 群組聊天" #: protocols/jabber/ui/dlgchatroomslist.ui:16 #: protocols/jabber/ui/dlgjabberchatroomslist.cpp:36 #, no-c-format msgid "List Chatrooms" msgstr "列出聊天室" #: protocols/jabber/ui/dlgjabberchatroomslist.cpp:89 msgid "Unable to retrieve the list of chat rooms." msgstr "無法取得聊天室清單。" #: protocols/jabber/ui/dlgjabberregister.cpp:53 msgid "" "Unable to retrieve registration form.\n" "Reason: \"%1\"" msgstr "" "無法取得註冊單。\n" "理由:%1" #: protocols/jabber/ui/dlgjabberregister.cpp:95 msgid "Registration sent successfully." msgstr "已成功送出註冊單。" #: protocols/jabber/ui/dlgjabberregister.cpp:95 #: protocols/jabber/ui/dlgjabberregister.cpp:102 msgid "Jabber Registration" msgstr "Jabber 註冊" #: protocols/jabber/ui/dlgjabberregister.cpp:102 msgid "" "The server denied the registration form.\n" "Reason: \"%1\"" msgstr "" "伺服器已拒絕此註冊單。\n" "理由:%1" #: protocols/jabber/ui/dlgjabberservices.cpp:125 #, c-format msgid "" "Unable to retrieve the list of services.\n" "Reason: %1" msgstr "" "無法取得服務清單。\n" "理由:%1" #: protocols/jabber/ui/dlgjabbervcard.cpp:64 msgid "Jabber vCard" msgstr "Jabber vCard" #: protocols/jabber/ui/dlgjabbervcard.cpp:64 msgid "&Save User Info" msgstr "儲存個人資訊(&S)" #: protocols/jabber/ui/dlgjabbervcard.cpp:64 msgid "&Fetch vCard" msgstr "抓取 vCard(&F)" #: protocols/jabber/ui/dlgjabbervcard.cpp:299 msgid "Saving vCard to server..." msgstr "儲存 vCard 到伺服器..." #: protocols/jabber/ui/dlgjabbervcard.cpp:421 msgid "vCard save sucessful." msgstr "vCard 已成功儲存。" #: protocols/jabber/ui/dlgjabbervcard.cpp:426 msgid "Error: Unable to save vCard." msgstr "錯誤:無法儲存 vCard" #: protocols/jabber/ui/dlgjabbervcard.cpp:434 msgid "Fetching contact vCard..." msgstr "抓取聯絡人的 vCard 中..." #: protocols/jabber/ui/dlgjabbervcard.cpp:457 msgid "vCard fetching Done." msgstr "vCard 已抓取完成。" #: protocols/jabber/ui/dlgjabbervcard.cpp:461 msgid "" "Error: vCard could not be fetched correctly. Check connectivity with the " "Jabber server." msgstr "錯誤:無法正確抓取 vCard。請檢查與 Jabber 伺服器的連線。" #: protocols/jabber/ui/dlgjabbervcard.cpp:472 msgid "Jabber Photo" msgstr "Jabber 相片" #: protocols/jabber/ui/dlgjabbervcard.cpp:535 msgid "" "An error occurred when trying to change the photo.
Make sure that you " "have selected a correct image file
" msgstr "改變顯示圖片時發生錯誤。
請確定您選擇了正確的圖片檔。
" #: protocols/jabber/ui/jabberaddcontactpage.cpp:52 msgid "Loading instruction from gateway..." msgstr "從閘道器載入指令..." #: protocols/jabber/ui/jabberaddcontactpage.cpp:63 msgid "Connect to the Jabber network and try again." msgstr "連線到 Jabber 網路,然後再試一次。" #: protocols/jabber/ui/jabberaddcontactpage.cpp:150 msgid "An error occured while loading instructions from gateway." msgstr "從閘道器中載入指令時發生錯誤。" #: protocols/jabber/ui/jabberchooseserver.cpp:34 msgid "Choose Jabber Server" msgstr "選擇 Jabber 伺服器" #: protocols/jabber/ui/jabberchooseserver.cpp:44 msgid "Retrieving server list..." msgstr "取得伺服器清單..." #: protocols/jabber/ui/jabberchooseserver.cpp:111 msgid "Could not retrieve server list." msgstr "無法取得伺服器清單。" #: protocols/jabber/ui/jabberchooseserver.cpp:126 msgid "Could not parse the server list." msgstr "無清解析伺服器清單。" #: protocols/jabber/ui/jabbereditaccountwidget.cpp:153 msgid "" "The changes you just made will take effect next time you log in with Jabber." msgstr "您所做的變更將在下次登入 Jabber 時生效。" #: protocols/jabber/ui/jabbereditaccountwidget.cpp:154 msgid "Jabber Changes During Online Jabber Session" msgstr "Jabber 在工作階段中變更" #: protocols/jabber/ui/jabbereditaccountwidget.cpp:209 msgid "" "The Jabber ID you have chosen is invalid. Please make sure it is in the form " "user@server.com, like an email address." msgstr "" "您選擇的 Jabber 代號無效。請確定已經依照 user@server.com 的格式了,它有點像電" "子信箱地址。" #: protocols/jabber/ui/jabbereditaccountwidget.cpp:211 msgid "Invalid Jabber ID" msgstr "無效的 Jabber 代號" #: protocols/jabber/ui/jabberregisteraccount.cpp:51 msgid "Register New Jabber Account" msgstr "註冊新的 Jabber 帳號" #: protocols/jabber/ui/jabberregisteraccount.cpp:63 msgid "Register" msgstr "註冊" #: protocols/jabber/ui/jabberregisteraccount.cpp:128 msgid "Please enter a server name, or click Choose." msgstr "請輸入伺服器名稱,或是按一下選擇。" #: protocols/jabber/ui/jabberregisteraccount.cpp:139 msgid "Please enter a valid Jabber ID." msgstr "請輸入有效的 Jabber 代號。" #: protocols/jabber/ui/jabberregisteraccount.cpp:193 msgid "" "Unless you know what you are doing, your JID should be of the form " "\"username@server.com\". In your case for example \"username@%1\"." msgstr "" "除非您知道在做什麼,不然您的 JID 應該是 username@server.com 的形式。以您的情" "況舉例,username@%1。" #: protocols/jabber/ui/jabberregisteraccount.cpp:248 msgid "Connecting to server..." msgstr "連線到伺服器..." #: protocols/jabber/ui/jabberregisteraccount.cpp:317 msgid "Protocol error." msgstr "通訊協定錯誤。" #: protocols/jabber/ui/jabberregisteraccount.cpp:330 msgid "Connected successfully, registering new account..." msgstr "已成功連線,正在註冊新帳號..." #: protocols/jabber/ui/jabberregisteraccount.cpp:345 msgid "Registration successful." msgstr "已成功註冊。" #: protocols/jabber/ui/jabberregisteraccount.cpp:379 msgid "Registration failed." msgstr "註冊失敗。" #: protocols/jabber/ui/jabberregisteraccount.cpp:381 msgid "" "Unable to create account on the server. The Jabber ID is probably already in " "use." msgstr "無法在伺服器上建立帳號。Jabber 代號可能已經有人使用了。" #: protocols/jabber/ui/jabberregisteraccount.cpp:382 msgid "Jabber Account Registration" msgstr "Jabber 帳號註冊" #: protocols/meanwhile/meanwhileaccount.cpp:141 msgid "&Change Status Message" msgstr "變更狀態訊息(&C)" #: protocols/meanwhile/meanwhileaccount.cpp:204 msgid "Meanwhile Plugin: Message from server" msgstr "Meanwhile 外掛程式:伺服器訊息" #: protocols/meanwhile/meanwhileeditaccountwidget.cpp:151 #: protocols/winpopup/wpeditaccount.cpp:100 #: protocols/yahoo/yahooeditaccount.cpp:108 msgid "You must enter a valid screen name." msgstr "您必須輸入一個合法的螢幕名稱。" #: protocols/meanwhile/meanwhileeditaccountwidget.cpp:152 #: protocols/meanwhile/meanwhileeditaccountwidget.cpp:159 #: protocols/meanwhile/meanwhileeditaccountwidget.cpp:166 #: protocols/meanwhile/meanwhileeditaccountwidget.cpp:173 #: protocols/meanwhile/meanwhilesession.cpp:202 msgid "Meanwhile Plugin" msgstr "Meanwhile 外掛程式" #: protocols/meanwhile/meanwhileeditaccountwidget.cpp:158 msgid "" "You must deselect password remembering or enter a valid password." msgstr "您必須解除「記住密碼」,或輸入正確的密碼。" #: protocols/meanwhile/meanwhileeditaccountwidget.cpp:165 msgid "You must enter the server's hostname/ip address." msgstr "您必須輸入伺服器的主機名稱或 IP 位址。" #: protocols/meanwhile/meanwhileeditaccountwidget.cpp:172 msgid "0 is not a valid port number." msgstr "0 不是正確的連接埠。" #: protocols/meanwhile/meanwhileprotocol.cpp:63 msgid "Status Message" msgstr "狀態訊息" #: protocols/meanwhile/meanwhilesession.cpp:202 msgid "Could not connect to server" msgstr "無法連線到伺服器" #: protocols/meanwhile/meanwhilesession.cpp:961 msgid "Meanwhile Plugin: Conference invitation" msgstr "Meanwhile 外掛程式:會議邀請" #: protocols/oscar/icq/icqaccount.cpp:130 msgid "In&visible" msgstr "隱身(&V)" #: protocols/oscar/icq/icqaccount.cpp:137 msgid "Set Visibility..." msgstr "設定可見性,,," #: protocols/oscar/icq/icqaccount.cpp:226 msgid "You must be online to set users visibility." msgstr "您必須先上線才能設定使用者可見設定。" #: protocols/oscar/icq/icqaccount.cpp:227 #: protocols/oscar/icq/ui/icqaddcontactpage.cpp:86 #: protocols/oscar/icq/ui/icqaddcontactpage.cpp:94 #: protocols/oscar/icq/ui/icqsearchdialog.cpp:83 #: protocols/oscar/icq/ui/icqsearchdialog.cpp:108 #: protocols/oscar/icq/ui/icqsearchdialog.cpp:147 #: protocols/oscar/icq/ui/icqsearchdialog.cpp:196 msgid "ICQ Plugin" msgstr "ICQ 外掛程式" #: protocols/oscar/icq/icqcontact.cpp:253 msgid "Request Authorization" msgstr "要求認證" #: protocols/oscar/icq/icqcontact.cpp:254 msgid "Reason for requesting authorization:" msgstr "要求認證的理由:" #: protocols/oscar/icq/icqcontact.cpp:278 msgid "" "User %1 has granted your authorization request.\n" "Reason: %2" msgstr "" "使用者 %1 已同意您的認證請求。\n" "理由:%2" #: protocols/oscar/icq/icqcontact.cpp:287 msgid "" "User %1 has rejected the authorization request.\n" "Reason: %2" msgstr "" "使用者 %1 已拒絕您的認證請求。\n" "理由:%2" #: protocols/oscar/icq/icqcontact.cpp:542 #: protocols/oscar/liboscar/userdetails.cpp:129 msgid "" "_: Translators: client-name client-version\n" "%1 %2" msgstr "%1 %2" #: protocols/oscar/icq/icqcontact.cpp:551 protocols/oscar/oscarcontact.cpp:182 msgid "UTF-8" msgstr "萬國碼(UTF-8)" #: protocols/oscar/icq/icqcontact.cpp:553 msgid "RTF-Messages" msgstr "RTF 訊息" #: protocols/oscar/icq/icqcontact.cpp:555 protocols/oscar/oscarcontact.cpp:190 msgid "DirectIM/IMImage" msgstr "DirectIM/IMImage" #: protocols/oscar/icq/icqcontact.cpp:557 msgid "Groupchat" msgstr "群組聊天" #: protocols/oscar/icq/icqcontact.cpp:628 msgid "" "You must be logged on to ICQ before you can send a message to a user." msgstr "您要送訊息給使用者,必須先登入 ICQ。" #: protocols/oscar/icq/icqcontact.cpp:630 msgid "Not Signed On" msgstr "尚未登入" #: protocols/oscar/icq/icqcontact.cpp:690 msgid "&Request Authorization" msgstr "請求認證(&R)" #: protocols/oscar/icq/icqcontact.cpp:692 msgid "&Grant Authorization" msgstr "同意認證(&G)" #: protocols/oscar/icq/icqcontact.cpp:703 msgid "&Ignore" msgstr "忽略(&I)" #: protocols/oscar/icq/icqcontact.cpp:705 msgid "Always &Visible To" msgstr "永遠讓誰看見(&V)" #: protocols/oscar/icq/icqcontact.cpp:707 msgid "Always &Invisible To" msgstr "永遠對誰隱身(&I)" #: protocols/oscar/icq/icqcontact.cpp:719 msgid "Select Encoding..." msgstr "選取編碼..." #: protocols/oscar/icq/icqpresence.cpp:72 msgid "&Do Not Disturb" msgstr "請勿打擾(&D)" #: protocols/oscar/icq/icqpresence.cpp:72 msgid "Do Not Disturb (Invisible)" msgstr "請勿打擾(隱身)" #: protocols/oscar/icq/icqpresence.cpp:73 msgid "O&ccupied" msgstr "忙碌中(&C)" #: protocols/oscar/icq/icqpresence.cpp:73 msgid "Occupied" msgstr "忙碌中" #: protocols/oscar/icq/icqpresence.cpp:73 msgid "Occupied (Invisible)" msgstr "忙碌中(隱身)" #: protocols/oscar/icq/icqpresence.cpp:74 msgid "Not A&vailable" msgstr "無法聯繫(&V)" #: protocols/oscar/icq/icqpresence.cpp:74 msgid "Not Available" msgstr "無法聯繫" #: protocols/oscar/icq/icqpresence.cpp:74 msgid "Not Available (Invisible)" msgstr "無法聯繫(隱身)" #: protocols/oscar/icq/icqpresence.cpp:75 msgid "Away (Invisible)" msgstr "離開(隱身)" #: protocols/oscar/icq/icqpresence.cpp:76 msgid "&Free for Chat" msgstr "有空聊天(&F)" #: protocols/oscar/icq/icqpresence.cpp:76 msgid "Free For Chat" msgstr "有空聊天" #: protocols/oscar/icq/icqpresence.cpp:76 msgid "Free For Chat (Invisible)" msgstr "有空聊天(隱身)" #: protocols/gadu/ui/gaduawayui.ui:71 protocols/oscar/icq/icqpresence.cpp:77 #, no-c-format msgid "O&nline" msgstr "線上(&N)" #: protocols/oscar/icq/icqpresence.cpp:77 msgid "Online (Invisible)" msgstr "上線(隱身)" #: protocols/oscar/icq/icqpresence.cpp:129 msgid "Connecting..." msgstr "連線中..." #: protocols/oscar/icq/icqpresence.cpp:133 msgid "Waiting for Authorization" msgstr "等待認證" #: protocols/oscar/icq/icqprotocol.cpp:139 #: protocols/oscar/icq/ui/icqaddcontactpage.cpp:86 msgid "You must be online to add a contact." msgstr "您必須上線才可以加入聯絡人" #: protocols/oscar/icq/icqprotocol.cpp:139 protocols/oscar/oscaraccount.cpp:797 #: protocols/yahoo/yahooprotocol.cpp:74 msgid "ICQ" msgstr "ICQ" #: protocols/oscar/icq/icqprotocol.cpp:144 msgid "'%1'" msgstr "'%1'" #: protocols/oscar/icq/icqprotocol.cpp:145 msgid "'%1' (%2)" msgstr "'%1' (%2)" #: protocols/oscar/icq/icqprotocol.cpp:148 msgid "Do you want to add %1 to your contact list?" msgstr "您要新增 %1 到您的聯絡人清單中嗎?" #: protocols/oscar/icq/icqprotocol.cpp:182 msgid "IP Address" msgstr "IP 位址" #: protocols/oscar/icq/icqprotocol.cpp:183 msgid "Client Features" msgstr "客戶端功能" #: protocols/oscar/icq/icqprotocol.cpp:184 msgid "Buddy Icon MD5 Hash" msgstr "好友圖示 MD5 Hash" #: protocols/oscar/icq/icqprotocol.cpp:185 msgid "Contact Encoding" msgstr "聯絡人編碼" #: protocols/gadu/ui/gadueditaccountui.ui:520 #: protocols/gadu/ui/gadusearch.ui:267 protocols/oscar/icq/icqprotocol.cpp:215 #, no-c-format msgid "Female" msgstr "女" #: protocols/gadu/ui/gadueditaccountui.ui:525 #: protocols/gadu/ui/gadusearch.ui:262 protocols/oscar/icq/icqprotocol.cpp:216 #, no-c-format msgid "Male" msgstr "男" #: protocols/oscar/icq/icqprotocol.cpp:235 msgid "Ascension Island" msgstr "復活島" #: protocols/oscar/icq/icqprotocol.cpp:237 msgid "Australian Antarctic Territory" msgstr "澳洲南極領土" #: protocols/oscar/icq/icqprotocol.cpp:244 msgid "Barbuda" msgstr "巴布達" #: protocols/oscar/icq/icqprotocol.cpp:255 msgid "British Virgin Islands" msgstr "英屬維爾京群島" #: protocols/oscar/icq/icqprotocol.cpp:281 msgid "Diego Garcia" msgstr "迪戈加西亞 (Diego Garcia)" #: protocols/oscar/icq/icqprotocol.cpp:297 msgid "French Antilles" msgstr "法屬安地列斯群島" #: protocols/oscar/icq/icqprotocol.cpp:311 msgid "Guantanamo Bay" msgstr "關塔那摩灣(Guantanamo Bay)" #: protocols/oscar/icq/icqprotocol.cpp:320 msgid "INMARSAT (Atlantic-East)" msgstr "國際航海通訊衛星(東大西洋區)" #: protocols/oscar/icq/icqprotocol.cpp:321 msgid "INMARSAT (Atlantic-West)" msgstr "國際航海通訊衛星(西大西洋區)" #: protocols/oscar/icq/icqprotocol.cpp:322 msgid "INMARSAT (Indian)" msgstr "國際航海通訊衛星(印度洋區)" #: protocols/oscar/icq/icqprotocol.cpp:323 msgid "INMARSAT (Pacific)" msgstr "國際航海通訊衛星(太平洋區)" #: protocols/oscar/icq/icqprotocol.cpp:324 msgid "INMARSAT" msgstr "國際航海通訊衛星" #: protocols/oscar/icq/icqprotocol.cpp:328 msgid "International Freephone Service" msgstr "國際免付費電話服務" #: protocols/oscar/icq/icqprotocol.cpp:334 #: protocols/oscar/icq/icqprotocol.cpp:408 msgid "Ivory Coast" msgstr "象牙海岸" #: protocols/oscar/icq/icqprotocol.cpp:380 msgid "Nevis" msgstr "尼維斯(Nevis)" #: protocols/oscar/icq/icqprotocol.cpp:402 msgid "Reunion Island" msgstr "留尼旺島(Reunion Island)" #: protocols/oscar/icq/icqprotocol.cpp:404 msgid "Rota Island" msgstr "羅塔島(Rota Island)" #: protocols/oscar/icq/icqprotocol.cpp:437 msgid "Tinian Island" msgstr "天寧島(Tinian Island)" #: protocols/oscar/icq/icqprotocol.cpp:475 msgid "Bhojpuri" msgstr "博杰普里(Bhojpuri)" #: protocols/oscar/icq/icqprotocol.cpp:478 msgid "Cantonese" msgstr "廣東話" #: protocols/oscar/icq/icqprotocol.cpp:488 msgid "Farsi" msgstr "波斯語" #: protocols/oscar/icq/icqprotocol.cpp:528 msgid "Taiwanese" msgstr "台語" #: protocols/oscar/icq/icqprotocol.cpp:537 #: protocols/oscar/oscarencodingselectiondialog.cpp:36 msgid "Big5" msgstr "Big5(繁體中文)" #: protocols/oscar/icq/icqprotocol.cpp:538 #: protocols/oscar/oscarencodingselectiondialog.cpp:37 msgid "Big5-HKSCS" msgstr "Big5-HKSCS(繁體中文)" #: protocols/oscar/icq/icqprotocol.cpp:539 #: protocols/oscar/oscarencodingselectiondialog.cpp:38 msgid "euc-JP Japanese" msgstr "euc-JP(日文)" #: protocols/oscar/icq/icqprotocol.cpp:540 #: protocols/oscar/oscarencodingselectiondialog.cpp:39 msgid "euc-KR Korean" msgstr "euc-KR(韓文)" #: protocols/oscar/icq/icqprotocol.cpp:541 #: protocols/oscar/oscarencodingselectiondialog.cpp:40 msgid "GB-2312 Chinese" msgstr "GB-2312(簡體中文)" #: protocols/oscar/icq/icqprotocol.cpp:542 #: protocols/oscar/oscarencodingselectiondialog.cpp:41 msgid "GBK Chinese" msgstr "GBK(簡體中文)" #: protocols/oscar/icq/icqprotocol.cpp:543 #: protocols/oscar/oscarencodingselectiondialog.cpp:42 msgid "GB18030 Chinese" msgstr "GB18030(簡體中文)" #: protocols/oscar/icq/icqprotocol.cpp:545 #: protocols/oscar/oscarencodingselectiondialog.cpp:44 msgid "JIS Japanese" msgstr "JIS(日文)" #: protocols/oscar/icq/icqprotocol.cpp:546 #: protocols/oscar/oscarencodingselectiondialog.cpp:45 msgid "Shift-JIS Japanese" msgstr "Shift-JIS(日文)" #: protocols/oscar/icq/icqprotocol.cpp:548 #: protocols/oscar/oscarencodingselectiondialog.cpp:47 msgid "KOI8-R Russian" msgstr "KOI8-R(俄文)" #: protocols/oscar/icq/icqprotocol.cpp:549 #: protocols/oscar/oscarencodingselectiondialog.cpp:48 msgid "KOI8-U Ukrainian" msgstr "KOI8-U (烏克蘭文)" #: protocols/oscar/icq/icqprotocol.cpp:551 #: protocols/oscar/oscarencodingselectiondialog.cpp:50 msgid "ISO-8859-1 Western" msgstr "ISO-8859-1 西方語系" #: protocols/oscar/icq/icqprotocol.cpp:552 #: protocols/oscar/oscarencodingselectiondialog.cpp:51 msgid "ISO-8859-2 Central European" msgstr "ISO-8859-2 中歐語系" #: protocols/oscar/icq/icqprotocol.cpp:553 #: protocols/oscar/oscarencodingselectiondialog.cpp:52 msgid "ISO-8859-3 Central European" msgstr "ISO-8859-3 中歐語系" #: protocols/oscar/icq/icqprotocol.cpp:554 #: protocols/oscar/oscarencodingselectiondialog.cpp:53 msgid "ISO-8859-4 Baltic" msgstr "ISO-8859-4 波羅的海語系" #: protocols/oscar/icq/icqprotocol.cpp:555 #: protocols/oscar/oscarencodingselectiondialog.cpp:54 msgid "ISO-8859-5 Cyrillic" msgstr "ISO-8859-5 斯拉夫語系" #: protocols/oscar/icq/icqprotocol.cpp:556 #: protocols/oscar/oscarencodingselectiondialog.cpp:55 msgid "ISO-8859-6 Arabic" msgstr "ISO-8859-6 阿拉伯語系" #: protocols/oscar/icq/icqprotocol.cpp:557 #: protocols/oscar/oscarencodingselectiondialog.cpp:56 msgid "ISO-8859-7 Greek" msgstr "ISO-8859-7 希臘語系" #: protocols/oscar/icq/icqprotocol.cpp:558 #: protocols/oscar/oscarencodingselectiondialog.cpp:57 msgid "ISO-8859-8 Hebrew, visually ordered" msgstr "ISO-8859-8 希伯來語系" #: protocols/oscar/icq/icqprotocol.cpp:559 #: protocols/oscar/oscarencodingselectiondialog.cpp:58 msgid "ISO-8859-8-I Hebrew, logically ordered" msgstr "ISO-8859-8-I 希伯來語系" #: protocols/oscar/icq/icqprotocol.cpp:560 #: protocols/oscar/oscarencodingselectiondialog.cpp:59 msgid "ISO-8859-9 Turkish" msgstr "ISO-8859-9 土耳其語系" #: protocols/oscar/icq/icqprotocol.cpp:561 #: protocols/oscar/oscarencodingselectiondialog.cpp:60 msgid "ISO-8859-10" msgstr "ISO-8859-10" #: protocols/oscar/icq/icqprotocol.cpp:562 #: protocols/oscar/oscarencodingselectiondialog.cpp:61 msgid "ISO-8859-13" msgstr "ISO-8859-13" #: protocols/oscar/icq/icqprotocol.cpp:563 #: protocols/oscar/oscarencodingselectiondialog.cpp:62 msgid "ISO-8859-14" msgstr "ISO-8859-14" #: protocols/oscar/icq/icqprotocol.cpp:564 #: protocols/oscar/oscarencodingselectiondialog.cpp:63 msgid "ISO-8859-15 Western" msgstr "ISO-8859-15 西方語系" #: protocols/oscar/icq/icqprotocol.cpp:566 #: protocols/oscar/oscarencodingselectiondialog.cpp:65 msgid "Windows-1250 Central European" msgstr "Windows-1250 中歐語系" #: protocols/oscar/icq/icqprotocol.cpp:567 #: protocols/oscar/oscarencodingselectiondialog.cpp:66 msgid "Windows-1251 Cyrillic" msgstr "Windows-1251 斯拉夫語系" #: protocols/oscar/icq/icqprotocol.cpp:568 #: protocols/oscar/oscarencodingselectiondialog.cpp:67 msgid "Windows-1252 Western" msgstr "Windows-1252 西方語系" #: protocols/oscar/icq/icqprotocol.cpp:569 #: protocols/oscar/oscarencodingselectiondialog.cpp:68 msgid "Windows-1253 Greek" msgstr "Windows-1253 希臘語系" #: protocols/oscar/icq/icqprotocol.cpp:570 #: protocols/oscar/oscarencodingselectiondialog.cpp:69 msgid "Windows-1254 Turkish" msgstr "Windows-1254 土耳其語系" #: protocols/oscar/icq/icqprotocol.cpp:571 #: protocols/oscar/oscarencodingselectiondialog.cpp:70 msgid "Windows-1255 Hebrew" msgstr "Windows-1255 希伯來語系" #: protocols/oscar/icq/icqprotocol.cpp:572 #: protocols/oscar/oscarencodingselectiondialog.cpp:71 msgid "Windows-1256 Arabic" msgstr "Windows-1256 阿拉伯語系" #: protocols/oscar/icq/icqprotocol.cpp:573 #: protocols/oscar/oscarencodingselectiondialog.cpp:72 msgid "Windows-1257 Baltic" msgstr "Windows-1257 波羅的海語系" #: protocols/oscar/icq/icqprotocol.cpp:574 #: protocols/oscar/oscarencodingselectiondialog.cpp:73 msgid "Windows-1258 Viet Nam" msgstr "Windows-1258 越南語系" #: protocols/oscar/icq/icqprotocol.cpp:576 #: protocols/oscar/oscarencodingselectiondialog.cpp:75 msgid "IBM 850" msgstr "IBM 850" #: protocols/oscar/icq/icqprotocol.cpp:577 #: protocols/oscar/oscarencodingselectiondialog.cpp:76 msgid "IBM 866" msgstr "IBM 866" #: protocols/oscar/icq/icqprotocol.cpp:579 #: protocols/oscar/oscarencodingselectiondialog.cpp:78 msgid "TIS-620 Thai" msgstr "TIS-620 泰語" #: protocols/oscar/icq/icqprotocol.cpp:581 #: protocols/oscar/oscarencodingselectiondialog.cpp:80 msgid "UTF-8 Unicode" msgstr "UTF-8 萬國碼" #: protocols/oscar/icq/icqprotocol.cpp:582 #: protocols/oscar/oscarencodingselectiondialog.cpp:81 msgid "UTF-16 Unicode" msgstr "UTF-16 萬國碼" #: protocols/oscar/icq/icqprotocol.cpp:596 msgid "Single" msgstr "單身" #: protocols/oscar/icq/icqprotocol.cpp:597 msgid "Long term relationship" msgstr "長期關係" #: protocols/oscar/icq/icqprotocol.cpp:598 msgid "Engaged" msgstr "已訂婚" #: protocols/oscar/icq/icqprotocol.cpp:599 msgid "Married" msgstr "已結婚" #: protocols/oscar/icq/icqprotocol.cpp:600 msgid "Divorced" msgstr "已離婚" #: protocols/oscar/icq/icqprotocol.cpp:601 msgid "Separated" msgstr "已分居" #: protocols/oscar/icq/icqprotocol.cpp:602 msgid "Widowed" msgstr "已守寡" #: protocols/oscar/icq/icqprotocol.cpp:609 msgid "Art" msgstr "藝術" #: protocols/oscar/icq/icqprotocol.cpp:610 msgid "Cars" msgstr "車" #: protocols/oscar/icq/icqprotocol.cpp:611 msgid "Celebrities" msgstr "名流" #: protocols/oscar/icq/icqprotocol.cpp:612 msgid "Collections" msgstr "收集" #: protocols/oscar/icq/icqprotocol.cpp:613 msgid "Computers" msgstr "電腦" #: protocols/oscar/icq/icqprotocol.cpp:614 msgid "Culture" msgstr "文化" #: protocols/oscar/icq/icqprotocol.cpp:615 msgid "Fitness" msgstr "健身" #: protocols/oscar/icq/icqprotocol.cpp:616 protocols/oscar/oscarcontact.cpp:196 msgid "Games" msgstr "遊戲" #: protocols/oscar/icq/icqprotocol.cpp:617 msgid "Hobbies" msgstr "嗜好" #: protocols/oscar/icq/icqprotocol.cpp:618 msgid "ICQ - Help" msgstr "ICQ - 說明" #: protocols/oscar/icq/icqprotocol.cpp:619 msgid "Internet" msgstr "網際網路" #: protocols/oscar/icq/icqprotocol.cpp:620 msgid "Lifestyle" msgstr "生活風格" #: protocols/oscar/icq/icqprotocol.cpp:621 msgid "Movies" msgstr "電影" #: protocols/oscar/icq/icqprotocol.cpp:622 msgid "Music" msgstr "音樂" #: protocols/oscar/icq/icqprotocol.cpp:623 msgid "Outdoors" msgstr "戶外" #: protocols/oscar/icq/icqprotocol.cpp:624 msgid "Parenting" msgstr "親子" #: protocols/oscar/icq/icqprotocol.cpp:625 msgid "Pets and animals" msgstr "寵物與動物" #: protocols/oscar/icq/icqprotocol.cpp:626 msgid "Religion" msgstr "宗教" #: protocols/oscar/icq/icqprotocol.cpp:627 msgid "Science" msgstr "科學" #: protocols/oscar/icq/icqprotocol.cpp:628 msgid "Skills" msgstr "技能" #: protocols/oscar/icq/icqprotocol.cpp:629 msgid "Sports" msgstr "運動" #: protocols/oscar/icq/icqprotocol.cpp:630 msgid "Web design" msgstr "網站設計" #: protocols/oscar/icq/icqprotocol.cpp:631 msgid "Ecology" msgstr "經濟" #: protocols/oscar/icq/icqprotocol.cpp:632 msgid "News and media" msgstr "新聞與媒體" #: protocols/oscar/icq/icqprotocol.cpp:633 msgid "Government" msgstr "政府" #: protocols/oscar/icq/icqprotocol.cpp:634 msgid "Business" msgstr "商業" #: protocols/oscar/icq/icqprotocol.cpp:635 msgid "Mystics" msgstr "玄學" #: protocols/oscar/icq/icqprotocol.cpp:636 msgid "Travel" msgstr "旅行" #: protocols/oscar/icq/icqprotocol.cpp:637 msgid "Astronomy" msgstr "天文學" #: protocols/oscar/icq/icqprotocol.cpp:638 msgid "Space" msgstr "太空" #: protocols/oscar/icq/icqprotocol.cpp:639 msgid "Clothing" msgstr "服裝" #: protocols/oscar/icq/icqprotocol.cpp:640 msgid "Parties" msgstr "派對" #: protocols/oscar/icq/icqprotocol.cpp:641 msgid "Women" msgstr "女人" #: protocols/oscar/icq/icqprotocol.cpp:642 msgid "Social science" msgstr "社會科學" #: protocols/oscar/icq/icqprotocol.cpp:643 msgid "60's" msgstr "六十年代" #: protocols/oscar/icq/icqprotocol.cpp:644 msgid "70's" msgstr "七十年代" #: protocols/oscar/icq/icqprotocol.cpp:645 msgid "40's" msgstr "四十年代" #: protocols/oscar/icq/icqprotocol.cpp:646 msgid "50's" msgstr "五十年代" #: protocols/oscar/icq/icqprotocol.cpp:647 msgid "Finance and corporate" msgstr "財政與企業" #: protocols/oscar/icq/icqprotocol.cpp:648 msgid "Entertainment" msgstr "娛樂" #: protocols/oscar/icq/icqprotocol.cpp:649 msgid "Consumer electronics" msgstr "消費性電子" #: protocols/oscar/icq/icqprotocol.cpp:650 msgid "Retail stores" msgstr "零售商店" #: protocols/oscar/icq/icqprotocol.cpp:651 msgid "Health and beauty" msgstr "健康與美容" #: protocols/oscar/icq/icqprotocol.cpp:652 msgid "Media" msgstr "媒體" #: protocols/oscar/icq/icqprotocol.cpp:653 msgid "Household products" msgstr "家庭產品" #: protocols/oscar/icq/icqprotocol.cpp:654 msgid "Mail order catalog" msgstr "郵購目錄" #: protocols/oscar/icq/icqprotocol.cpp:655 msgid "Business services" msgstr "商業服務" #: protocols/oscar/icq/icqprotocol.cpp:656 msgid "Audio and visual" msgstr "聲音與視覺" #: protocols/oscar/icq/icqprotocol.cpp:657 msgid "Sporting and athletic" msgstr "體育" #: protocols/oscar/icq/icqprotocol.cpp:658 msgid "Publishing" msgstr "出版" #: protocols/oscar/icq/icqprotocol.cpp:659 msgid "Home automation" msgstr "家庭自動化" #: protocols/oscar/icq/icqreadaway.cpp:34 msgid "&Fetch Again" msgstr "重新抓取(&F)" #: protocols/oscar/icq/icqreadaway.cpp:40 #: protocols/oscar/icq/icqreadaway.cpp:82 msgid "'%2' Message for %1" msgstr "給 %1 的 %2 訊息" #: protocols/oscar/icq/icqreadaway.cpp:77 msgid "Fetching '%2' Message for %1..." msgstr "抓取給 %1 的 %2 訊息..." #: protocols/oscar/icq/ui/icqaddcontactpage.cpp:94 #: protocols/oscar/icq/ui/icqsearchdialog.cpp:108 msgid "You must enter a valid UIN." msgstr "您必須輸入合法的 UIN。" #: protocols/oscar/icq/ui/icqauthreplydialog.cpp:28 msgid "Authorization Reply" msgstr "認證回覆" #: protocols/oscar/icq/ui/icqauthreplydialog.cpp:53 msgid "%1 requested authorization to add you to his/her contact list." msgstr "%1請求您同意加入他的聯絡人清單中。" #: protocols/oscar/icq/ui/icqauthreplydialog.cpp:55 msgid "Authorization reply to %1." msgstr "認證回覆到%1。" #: protocols/oscar/icq/ui/icqsearchdialog.cpp:45 msgid "ICQ User Search" msgstr "ICQ 使用者搜尋" #: protocols/oscar/icq/ui/icqsearchdialog.cpp:83 msgid "You must be online to search the ICQ Whitepages." msgstr "您必須先上線才能搜尋 ICQ 白頁。" #: protocols/oscar/icq/ui/icqsearchdialog.cpp:147 msgid "You must enter search criteria." msgstr "您必須輸入搜尋條件。" #: protocols/oscar/icq/ui/icqsearchdialog.cpp:196 msgid "You must be online to display user info." msgstr "您必須先上線才能顯示使用者資訊。" #: protocols/oscar/icq/ui/icquserinfowidget.cpp:44 msgid "ICQ User Information" msgstr "ICQ 使用者資訊" #: protocols/oscar/icq/ui/icquserinfowidget.cpp:48 #: protocols/yahoo/ui/yahoouserinfodialog.cpp:48 msgid "General Info" msgstr "一般資訊" #: protocols/oscar/icq/ui/icquserinfowidget.cpp:49 msgid "General ICQ Information" msgstr "一般 ICQ 資訊" #: protocols/oscar/icq/ui/icquserinfowidget.cpp:55 #: protocols/yahoo/ui/yahoouserinfodialog.cpp:55 msgid "Work Info" msgstr "工作資訊" #: protocols/oscar/icq/ui/icquserinfowidget.cpp:56 #: protocols/yahoo/ui/yahoouserinfodialog.cpp:56 msgid "Work Information" msgstr "工作資訊" #: protocols/oscar/icq/ui/icquserinfowidget.cpp:62 #: protocols/yahoo/ui/yahoouserinfodialog.cpp:62 msgid "Other Info" msgstr "其他資訊" #: protocols/oscar/icq/ui/icquserinfowidget.cpp:63 msgid "Other ICQ Information" msgstr "其他 ICQ 資訊" #: protocols/oscar/icq/ui/icquserinfowidget.cpp:69 msgid "Interest Info" msgstr "興趣資訊" #: protocols/oscar/icq/ui/icquserinfowidget.cpp:70 msgid "Interest" msgstr "興趣" #: protocols/oscar/liboscar/userdetails.cpp:328 msgid "MICQ" msgstr "MICQ" #: protocols/oscar/liboscar/userdetails.cpp:333 msgid "SIM" msgstr "SIM" #: protocols/oscar/liboscar/userdetails.cpp:338 msgid "Trillian" msgstr "Trillian" #: protocols/oscar/liboscar/userdetails.cpp:343 msgid "MacICQ" msgstr "MacICQ" #: protocols/oscar/liboscar/userdetails.cpp:350 msgid "Licq SSL" msgstr "Licq SSL" #: protocols/oscar/liboscar/userdetails.cpp:352 msgid "Licq" msgstr "Licq" #: protocols/oscar/oscaraccount.cpp:226 protocols/oscar/oscaraccount.cpp:605 #: protocols/oscar/oscaraccount.cpp:611 msgid "Buddies" msgstr "好友" #: protocols/oscar/oscaraccount.cpp:395 msgid "ICQ Web Express" msgstr "ICQ 網路快遞" #: protocols/oscar/oscaraccount.cpp:397 msgid "ICQ Email Express" msgstr "ICQ 電子郵件快遞" #: protocols/oscar/oscaraccount.cpp:719 protocols/oscar/oscaraccount.cpp:736 msgid "" "_: account has been disconnected\n" "%1 disconnected" msgstr "%1 已離線" #: protocols/oscar/oscaraccount.cpp:760 msgid "" "There was an error in the protocol handling; it was not fatal, so you will " "not be disconnected." msgstr "處理協定時發生錯誤。這個錯誤並不嚴重,因此您不會被迫離線。" #: protocols/oscar/oscaraccount.cpp:762 msgid "" "There was an error in the protocol handling; automatic reconnection " "occurring." msgstr "處理協定時發生錯誤。自動重新連線中。" #: protocols/oscar/oscaraccount.cpp:764 msgid "OSCAR Protocol error" msgstr "OSCAR 協定錯誤" #: protocols/oscar/oscaraccount.cpp:798 msgid "" "_: ICQ user id\n" "UIN" msgstr "UIN" #: protocols/oscar/oscaraccount.cpp:808 msgid "" "You have logged in more than once with the same %1, account %2 is now " "disconnected." msgstr "您以同樣的 %1 重覆登入。%2 已離線。" #: protocols/oscar/oscaraccount.cpp:814 msgid "" "Sign on failed because either your %1 or password are invalid. Please check " "your settings for account %2." msgstr "登入失敗,可能您的 %1 或密碼不正確。請檢查帳號 %2 的設定。" #: protocols/oscar/oscaraccount.cpp:822 msgid "The %1 service is temporarily unavailable. Please try again later." msgstr "服務 %1 暫時無法使用。請稍候再試。" #: protocols/oscar/oscaraccount.cpp:827 msgid "" "Could not sign on to %1 with account %2 because the password was incorrect." msgstr "無法在 %1 上登入帳號 %2,因為密碼不正確。" #: protocols/oscar/oscaraccount.cpp:832 msgid "Could not sign on to %1 with nonexistent account %2." msgstr "無法在 %1 以不存在的帳號 %2 登入。" #: protocols/oscar/oscaraccount.cpp:836 msgid "Sign on to %1 failed because your account %2 expired." msgstr "登入 %1 失敗,因為帳號 %2 已過期。" #: protocols/oscar/oscaraccount.cpp:840 msgid "Sign on to %1 failed because your account %2 is currently suspended." msgstr "登入 %1 失敗,因為帳號 %2 目前暫時被停用。" #: protocols/oscar/oscaraccount.cpp:846 msgid "" "Could not sign on to %1 as there are too many clients from the same computer." msgstr "無法登入 %1,因為有太多客戶端從同一部電腦登入。" #: protocols/oscar/oscaraccount.cpp:852 msgid "" "Account %1 was blocked on the %2 server for sending messages too quickly. " "Wait ten minutes and try again. If you continue to try, you will need to " "wait even longer." msgstr "" "帳號 %1 在伺服器 %2 上被封鎖,因為送出訊息的速度太快。請等十分鐘後再試一次。" "如果您繼續試,您可能就得等更久。" #: protocols/oscar/oscaraccount.cpp:861 msgid "" "Account %1 was blocked on the %2 server for reconnecting too quickly. Wait " "ten minutes and try again. If you continue to try, you will need to wait " "even longer." msgstr "" "帳號 %1 在伺服器 %2 上被封鎖,因為重新連線的速度太快。請等十分鐘後再試一次。" "如果您繼續試,您可能就得等更久。" #: protocols/oscar/oscaraccount.cpp:873 protocols/oscar/oscaraccount.cpp:893 msgid "Sign on to %1 with your account %2 failed." msgstr "帳號 %2 登入到 %1 時失敗。" #: protocols/oscar/oscaraccount.cpp:880 msgid "" "The %1 server thinks the client you are using is too old. Please report this " "as a bug at http://bugs.trinitydesktop.org" msgstr "" "伺服器 %1 認為您使用的客戶端太舊了。請回報此錯誤到 http://bugs." "trinitydesktop.org" #: protocols/oscar/oscaraccount.cpp:886 msgid "" "Account %1 was disabled on the %2 server because of your age (less than 13)." msgstr "帳號 %1 在伺服器 %2 上被關閉了,因為您的年紀太小(小於十三歲)。" #: protocols/oscar/oscarcontact.cpp:175 #, c-format msgid "" "_: Translators: client name and version\n" "%1" msgstr "%1" #: protocols/oscar/oscarcontact.cpp:180 msgid "Buddy icons" msgstr "好友圖示" #: protocols/oscar/oscarcontact.cpp:184 msgid "Rich text messages" msgstr "RichText 訊息" #: protocols/oscar/oscarcontact.cpp:186 msgid "Group chat" msgstr "群組聊天" #: protocols/oscar/oscarcontact.cpp:188 msgid "Voice chat" msgstr "語音聊天" #: protocols/oscar/oscarcontact.cpp:192 msgid "Send buddy list" msgstr "傳送好友名單" #: protocols/oscar/oscarcontact.cpp:194 msgid "File transfers" msgstr "檔案傳輸" #: protocols/oscar/oscarcontact.cpp:198 msgid "Trillian user" msgstr "Trillian 使用者" #: protocols/oscar/oscarencodingselectiondialog.cpp:28 msgid "Select Encoding" msgstr "選取編碼" #: protocols/oscar/oscarlistnonservercontacts.cpp:28 msgid "Add Contacts to Server List" msgstr "新增聯絡人到伺服器清單" #: protocols/oscar/oscarlistnonservercontacts.cpp:34 msgid "Do &Not Add" msgstr "不要加入(&N)" #: protocols/oscar/oscarvisibilitydialog.cpp:29 msgid "Add Contacts to Visible or Invisible List" msgstr "新增聯絡人到可見或不可見清單" #: protocols/sms/serviceloader.cpp:46 #, c-format msgid "Could not load service %1." msgstr "無法載入服務 %1。" #: protocols/sms/serviceloader.cpp:47 msgid "Error Loading Service" msgstr "載入服務時發生錯誤" #: protocols/sms/services/gsmlib.cpp:447 msgid "" "GSMLib is a library (and utilities) for sending SMS via a GSM device. " "The program can be found on %1" msgstr "" "GSMLib 是以 GSM 裝置傳送 SMS 的函式庫。程式可以在 %1 " "找到。" #: protocols/sms/services/smsclient.cpp:66 msgid "No provider configured" msgstr "沒有設定提供者" #: protocols/sms/services/smsclient.cpp:66 #: protocols/sms/services/smssend.cpp:57 #: protocols/sms/services/smssendprovider.cpp:216 #: protocols/sms/services/smssendprovider.cpp:224 #: protocols/sms/smscontact.cpp:57 msgid "Could Not Send Message" msgstr "無法傳送訊息" #: protocols/sms/services/smsclient.cpp:178 msgid "" "SMSClient is a program for sending SMS with the modem. The program can " "be found on %1" msgstr "" "SMSClient 是以數據機傳送 SMS 的程式。可以在 %1 找到。" "" #: protocols/sms/services/smssend.cpp:57 msgid "No provider configured." msgstr "未設定提供者。" #: protocols/sms/services/smssend.cpp:64 msgid "" "No prefix set for SMSSend, please change it in the configuration dialog." msgstr "未設定 SMSSend 的前置。請在設定對話框中設定。" #: protocols/sms/services/smssend.cpp:64 msgid "No Prefix" msgstr "沒有前置" #: protocols/sms/services/smssend.cpp:184 msgid "%1 Settings" msgstr "%1 設定" #: protocols/sms/services/smssend.cpp:240 msgid "" "SMSSend is a program for sending SMS through gateways on the web. It can " "be found on %2" msgstr "" "SMSSend 是一個透過網路閘道器送出 SMS 的程式。可以在 %2 找到。" #: protocols/sms/services/smssendprovider.cpp:215 msgid "Could not determine which argument which should contain the message." msgstr "無法決定哪個參數包含此訊息。" #: protocols/sms/services/smssendprovider.cpp:223 msgid "Could not determine which argument which should contain the number." msgstr "無法決定哪個參數包含此編號。" #: protocols/sms/smsaccount.cpp:86 msgid "" "This message is longer than the maximum length (%1). Should it be divided to " "%2 messages?" msgstr "訊息超過最大長度(%1)。要將它切割成 %2 個訊息嗎?" #: protocols/sms/smsaccount.cpp:87 msgid "Message Too Long" msgstr "訊息過長" #: protocols/sms/smsaccount.cpp:87 msgid "Divide" msgstr "切割" #: protocols/sms/smsaccount.cpp:87 msgid "Do Not Divide" msgstr "不要切割" #: protocols/sms/smsaccount.cpp:149 msgid "Message too long." msgstr "訊息過長。" #: protocols/sms/smscontact.cpp:56 msgid "Something went wrong when sending message." msgstr "送出訊息時發生錯誤。" #: protocols/sms/smscontact.cpp:126 msgid "&Contact Settings" msgstr "聯絡人設定(&C)" #: kopete/addaccountwizard/addaccountwizardpage1.ui:83 #: protocols/jabber/ui/dlgjabberchooseserver.ui:39 #: protocols/sms/smseditaccountwidget.cpp:134 #, no-c-format msgid "Description" msgstr "描述" #: protocols/sms/smsuserpreferences.cpp:27 msgid "User Preferences" msgstr "使用者喜好設定" #: protocols/winpopup/libwinpopup/libwinpopup.cpp:106 msgid "" "Working directory %1 does not exist.\n" "If you have not configured anything yet (samba) please see\n" "Install Into Samba (Configure... -> Account -> Edit) information\n" "on how to do this.\n" "Should the directory be created? (May need root password)" msgstr "" "工作目錄 %1 不存在。\n" "如果您沒有設定 samba,您最好呼叫「安裝到 Samba」(在設定...>帳號>編輯" "中)。\n" "要建立此目錄嗎?(可能需要 root 密碼)" #: protocols/winpopup/libwinpopup/libwinpopup.cpp:111 msgid "Create Directory" msgstr "建立目錄" #: protocols/winpopup/libwinpopup/libwinpopup.cpp:111 msgid "Do Not Create" msgstr "不要建立" #: protocols/winpopup/libwinpopup/libwinpopup.cpp:125 msgid "" "Permissions of the working directory %1 are wrong!\n" "You will not receive messages if you say no.\n" "You can also correct it manually (chmod 0777 %1) and restart kopete.\n" "Fix? (May need root password)" msgstr "" "工作目錄 %1 的權限錯誤!\n" "如果您不修正,您將無法接收訊息。\n" "您可以手動修正(chmod 0777 %1)並重新啟動 kopete。\n" "要修正嗎?(可能需要 root 密碼)" #: protocols/winpopup/libwinpopup/libwinpopup.cpp:130 #: protocols/winpopup/libwinpopup/libwinpopup.cpp:306 msgid "Fix" msgstr "修正" #: protocols/winpopup/libwinpopup/libwinpopup.cpp:130 #: protocols/winpopup/libwinpopup/libwinpopup.cpp:306 msgid "Do Not Fix" msgstr "不要修正" #: protocols/winpopup/libwinpopup/libwinpopup.cpp:234 msgid "" "Connection to localhost failed!\n" "Is your samba server running?" msgstr "" "連線到 localhost 失敗。\n" "您的 Samba 伺服器有在執行中嗎?" #: protocols/winpopup/libwinpopup/libwinpopup.cpp:303 msgid "" "A message file could not be removed; maybe the permissions are wrong.\n" "Fix? (May need root password)" msgstr "" "無法移除訊息檔。也許權限有問題。\n" "要修正嗎?(可能需要 root 密碼)" #: protocols/winpopup/libwinpopup/libwinpopup.cpp:311 msgid "Still cannot remove it; please fix manually." msgstr "還是無法移除。請手動修正。" #: protocols/winpopup/wpaccount.cpp:163 msgid "WinPopup (%1)" msgstr "WinPopup (%1)" #: protocols/winpopup/wpaddcontact.cpp:90 msgid "You must enter a valid hostname." msgstr "您必須輸入合法的主機名稱。" #: protocols/winpopup/wpaddcontact.cpp:90 #: protocols/winpopup/wpaddcontact.cpp:97 #: protocols/winpopup/wpeditaccount.cpp:100 #: protocols/winpopup/wpeditaccount.cpp:106 msgid "WinPopup" msgstr "WinPopup" #: protocols/winpopup/wpaddcontact.cpp:97 msgid "LOCALHOST is not allowed as contact." msgstr "LOCALHOST 不允許做為聯絡人。" #: protocols/winpopup/wpeditaccount.cpp:106 msgid "You must enter a valid smbclient path." msgstr "您必須輸入 smbclient 的路徑。" #: protocols/winpopup/wpprotocol.cpp:144 msgid "The Samba configuration file is modified." msgstr "已變更 Samba 設定檔。" #: protocols/winpopup/wpprotocol.cpp:144 msgid "Configuration Succeeded" msgstr "設定成功" #: protocols/winpopup/wpprotocol.cpp:146 msgid "Updating the Samba configuration file failed." msgstr "變更 Samba 設定失敗。" #: protocols/winpopup/wpprotocol.cpp:146 msgid "Configuration Failed" msgstr "設定失敗" #: protocols/winpopup/wpuserinfo.cpp:37 msgid "N/A" msgstr "不存在" #: protocols/winpopup/wpuserinfo.cpp:48 protocols/winpopup/wpuserinfo.cpp:49 #: protocols/winpopup/wpuserinfo.cpp:50 protocols/winpopup/wpuserinfo.cpp:51 msgid "Looking" msgstr "觀看" #: protocols/yahoo/libkyahoo/modifyyabtask.cpp:93 #: protocols/yahoo/libkyahoo/modifyyabtask.cpp:121 #, fuzzy msgid "An error occurred while saving the address book entry." msgstr "儲存通訊錄項目時發生錯誤。" #: protocols/yahoo/libkyahoo/modifyyabtask.cpp:177 #, fuzzy msgid "" "The Yahoo Address Book entry could not be saved:\n" "%1 - %2" msgstr "" "無法儲存 Yahoo 通訊錄項目:\n" "%1 - %2" #: protocols/yahoo/libkyahoo/modifyyabtask.cpp:184 #, fuzzy msgid "" "The Yahoo Address Book entry could not be created:\n" "%1 - %2" msgstr "" "無法建立 Yahoo 通訊錄項目:\n" "%1 - %2" #: protocols/yahoo/libkyahoo/modifyyabtask.cpp:191 #, fuzzy msgid "" "The Yahoo Address Book entry could not be deleted:\n" "%1 - %2" msgstr "" "無法刪除 Yahoo 通訊錄項目:\n" "%1 - %2" #: protocols/yahoo/libkyahoo/picturenotifiertask.cpp:151 #: protocols/yahoo/libkyahoo/sendpicturetask.cpp:79 msgid "The picture was not successfully uploaded" msgstr "圖片沒有成功上傳。" #: protocols/yahoo/libkyahoo/receivefiletask.cpp:55 #: protocols/yahoo/libkyahoo/receivefiletask.cpp:174 msgid "Could not open file for writing." msgstr "無法開啟檔案以寫入。" #: protocols/yahoo/libkyahoo/receivefiletask.cpp:143 #, fuzzy msgid "An error occurred while downloading the file." msgstr "下載檔案時發生錯誤。" #: protocols/yahoo/libkyahoo/sendfiletask.cpp:101 #, fuzzy msgid "Unknown error" msgstr "未知的錯誤。" #: protocols/yahoo/libkyahoo/sendfiletask.cpp:144 #, fuzzy msgid "Unable to connect to file transfer server" msgstr "無法連線到伺服器。" #: protocols/yahoo/libkyahoo/sendfiletask.cpp:209 #, fuzzy msgid "An error occurred while sending the file." msgstr "送出檔案時發生錯誤。" #: protocols/yahoo/libkyahoo/sendmessagetask.cpp:42 #, fuzzy msgid "An error occurred while sending the message" msgstr "送出訊息時發生錯誤。" #: protocols/yahoo/libkyahoo/sendmessagetask.cpp:42 msgid "The message is empty." msgstr "訊息是空的。" #: protocols/yahoo/libkyahoo/sendpicturetask.cpp:108 #, c-format msgid "Error opening file: %1" msgstr "開啟檔案時發生錯誤:%1" #: protocols/yahoo/libkyahoo/statusnotifiertask.cpp:103 #, fuzzy msgid "An unknown error has occurred." msgstr "發生未知的錯誤。" #: protocols/yahoo/libkyahoo/webcamtask.cpp:199 msgid "" "Webcam connection to the user %1 could not be established.\n" "\n" "Please relogin and try again." msgstr "" "無法建立與使用者 %1 的視訊連線。\n" "\n" "請重新登入後再重試一次。" #: protocols/yahoo/libkyahoo/webcamtask.cpp:537 #, fuzzy msgid "An error occurred closing the webcam session. " msgstr "關閉視訊階段時發生錯誤。" #: protocols/yahoo/libkyahoo/webcamtask.cpp:537 #, fuzzy msgid "You tried to close a connection that did not exist." msgstr "您試圖關閉一個不存在的連線。" #: protocols/yahoo/libkyahoo/yabtask.cpp:119 #, fuzzy msgid "Could not retrieve server side address book for user info." msgstr "無法取得伺服器端使用者資訊的通訊錄。" #: protocols/yahoo/libkyahoo/yahoobuddyiconloader.cpp:84 #, fuzzy msgid "An error occurred while downloading a buddy icon (%1)" msgstr "下載朋友圖示(%1)時發生錯誤。" #: protocols/yahoo/libkyahoo/yahoochattask.cpp:270 #: protocols/yahoo/libkyahoo/yahoochattask.cpp:274 #: protocols/yahoo/libkyahoo/yahoochattask.cpp:278 #, fuzzy msgid "Could not join chat" msgstr "無法新增聯絡人" #: protocols/yahoo/libkyahoo/yahoochattask.cpp:271 msgid "The room is full. Please choose another one." msgstr "" #: protocols/yahoo/libkyahoo/yahoochattask.cpp:275 #, fuzzy msgid "Invalid user." msgstr "不合法的使用者代號。" #: protocols/yahoo/libkyahoo/yahoochattask.cpp:279 #, fuzzy msgid "An unknown error occurred while joining the chat room." msgstr "要安裝聊天視窗風格時發生未知的錯誤。" #: protocols/yahoo/ui/yahoouserinfodialog.cpp:43 msgid "Yahoo User Information" msgstr "Yahoo 使用者資訊" #: protocols/yahoo/ui/yahoouserinfodialog.cpp:43 msgid "Save and Close" msgstr "儲存並離開" #: protocols/yahoo/ui/yahoouserinfodialog.cpp:43 msgid "Merge with existing entry" msgstr "與現有的項目合併" #: protocols/yahoo/ui/yahoouserinfodialog.cpp:49 msgid "General Yahoo Information" msgstr "一般 Yahoo 資訊" #: protocols/yahoo/ui/yahoouserinfodialog.cpp:63 msgid "Other Yahoo Information" msgstr "其他 Yahoo 資訊" #: protocols/yahoo/ui/yahoouserinfodialog.cpp:207 msgid "Replace existing entry" msgstr "取代現有的項目" #: protocols/yahoo/ui/yahoowebcamdialog.cpp:31 #, c-format msgid "Webcam for %1" msgstr "%1 的視訊" #: protocols/yahoo/ui/yahoowebcamdialog.cpp:45 msgid "No webcam image received" msgstr "沒有接收到視訊影像" #: protocols/yahoo/ui/yahoowebcamdialog.cpp:80 msgid "%1 has stopped broadcasting" msgstr "%1 已停止廣播" #: protocols/yahoo/ui/yahoowebcamdialog.cpp:82 msgid "%1 has cancelled viewing permission" msgstr "%1 已取消檢視權限" #: protocols/yahoo/ui/yahoowebcamdialog.cpp:84 msgid "%1 has declined permission to view webcam" msgstr "%1 已拒絕檢視視訊的權限" #: protocols/yahoo/ui/yahoowebcamdialog.cpp:86 msgid "%1 does not have his/her webcam online" msgstr "%1 線上並沒有視訊裝置" #: protocols/yahoo/ui/yahoowebcamdialog.cpp:88 msgid "Unable to view the webcam of %1 for an unknown reason" msgstr "因未知的理由無法檢視 %1 的視訊。" #: protocols/yahoo/ui/yahoowebcamdialog.cpp:97 msgid "%1 viewer(s)" msgstr "%1 個檢視者" #: protocols/yahoo/yahooaccount.cpp:97 msgid "Open Inbo&x..." msgstr "開啟收件匣(&X)..." #: protocols/yahoo/yahooaccount.cpp:98 msgid "Open &Addressbook..." msgstr "開啟通訊錄(&A)..." #: protocols/yahoo/yahooaccount.cpp:99 msgid "&Edit my contact details..." msgstr "編輯我的聯絡人詳情(&E)..." #: protocols/yahoo/yahooaccount.cpp:100 #, fuzzy msgid "&Join chat room..." msgstr "加入聊天..." #: protocols/yahoo/yahooaccount.cpp:753 #, fuzzy msgid "" "Could not log into the Yahoo service: your account has been locked.\n" "Visit %1 to reactivate it." msgstr "" "無法登入 Yahoo 服務:您的帳號已被鎖住。\n" "請到 %1 以重新啟動。" #: protocols/yahoo/yahooaccount.cpp:762 msgid "" "Could not log into the Yahoo service: the username specified was invalid." msgstr "無法登入 Yahoo 服務:使用者名稱錯誤。" #: protocols/yahoo/yahooaccount.cpp:771 msgid "" "You have been logged out of the Yahoo service, possibly due to a duplicate " "login." msgstr "您已登出 Yahoo 服務,可能是因為有重覆登入。" #: protocols/yahoo/yahooaccount.cpp:803 msgid "" "%1 has been disconnected.\n" "Error message:\n" "%2 - %3" msgstr "" "%1 已斷線。\n" "錯誤訊息:\n" "%2 - %3" #: protocols/yahoo/yahooaccount.cpp:816 msgid "" "There was an error while connecting %1 to the Yahoo server.\n" "Error message:\n" "%2 - %3" msgstr "" "連線 %1 到 Yahoo 伺服器時發生錯誤。\n" "錯誤訊息:\n" "%2 - %3" #: protocols/yahoo/yahooaccount.cpp:828 protocols/yahoo/yahooaccount.cpp:831 #, fuzzy msgid "" "%1\n" "\n" "Reason: %2" msgstr "" "%1\n" "\n" "理由: %2 - %3" #: protocols/yahoo/yahooaccount.cpp:829 protocols/yahoo/yahooaccount.cpp:832 #: protocols/yahoo/yahooaccount.cpp:1501 protocols/yahoo/yahooaccount.cpp:1693 #: protocols/yahoo/yahooaccount.cpp:1791 protocols/yahoo/yahooaccount.cpp:1806 #: protocols/yahoo/yahooeditaccount.cpp:180 #: protocols/yahoo/yahooeditaccount.cpp:186 msgid "Yahoo Plugin" msgstr "Yahoo 外掛程式" #: protocols/yahoo/yahooaccount.cpp:891 msgid "User %1 has granted your authorization request." msgstr "使用者 %1 已同意您的認證請求。" #: protocols/yahoo/yahooaccount.cpp:902 #, fuzzy msgid "" "User %1 has rejected your authorization request.\n" "%2" msgstr "" "使用者 %1 已同意您的認證請求。\n" "%2" #: protocols/yahoo/yahooaccount.cpp:1192 #, fuzzy msgid "" "_: This string is shown when the user is buzzed by a contact\n" "Buzz" msgstr "呼叫!呼叫!聽到請回答!" #: protocols/yahoo/yahooaccount.cpp:1230 #, fuzzy msgid "" "%1 has invited you to join a conference with %2.\n" "\n" "His/her message: %3\n" "\n" "Accept?" msgstr "" "%1 邀請您加入與 %2 的會議。\n" "\n" "他的訊息:%3\n" "\n" "要接受嗎?" #: protocols/yahoo/yahooaccount.cpp:1231 protocols/yahoo/yahooaccount.cpp:1685 #: protocols/yahoo/yahooaccount.cpp:1896 msgid "Accept" msgstr "接受" #: protocols/yahoo/yahooaccount.cpp:1332 #, fuzzy msgid "%1 has declined to join the conference: \"%2\"" msgstr "%1 拒絕加入此會議:「%2」。" #: protocols/yahoo/yahooaccount.cpp:1646 #, c-format msgid "" "_n: You have one unread message in your Yahoo inbox.\n" "You have %n unread messages in your Yahoo inbox." msgstr "您的 Yahoo 收件匣中有 %n 封未讀訊息。" #: protocols/yahoo/yahooaccount.cpp:1654 #, fuzzy msgid "You have a message from %1 in your Yahoo inbox.

Subject: %2" msgstr "您的 Yahoo 收件匣中有一封來自 %1 的訊息。" #: protocols/yahoo/yahooaccount.cpp:1684 msgid "%1 has invited you to view his/her webcam. Accept?" msgstr "%1 邀請您與他做視訊連線。要接受嗎?" #: protocols/yahoo/yahooaccount.cpp:1693 msgid "Webcam for %1 is not available." msgstr "%1 的視訊無法使用。" #: protocols/yahoo/yahooaccount.cpp:1791 #, fuzzy msgid "" "The selected buddy icon could not be opened.
Please set a new " "buddy icon.
" msgstr "所選取的好友圖示無法開啟。
請設定新的好友圖示。
" #: protocols/yahoo/yahooaccount.cpp:1806 #: protocols/yahoo/yahooeditaccount.cpp:180 msgid "An error occurred when trying to change the display picture." msgstr "變更顯示圖片時發生錯誤。" #: protocols/yahoo/yahooaccount.cpp:1895 msgid "%1 wants to view your webcam. Grant access?" msgstr "%1 想要看您的視訊。要接受嗎?" #: protocols/yahoo/yahoochatsession.cpp:56 msgid "Buzz Contact" msgstr "呼叫聯絡人" #: protocols/yahoo/yahoochatsession.cpp:57 msgid "Show User Info" msgstr "顯示使用者資訊" #: protocols/yahoo/yahoochatsession.cpp:58 msgid "Request Webcam" msgstr "要求視訊" #: protocols/yahoo/yahoochatsession.cpp:59 protocols/yahoo/yahoocontact.cpp:380 msgid "Invite to view your Webcam" msgstr "邀請檢視您的視訊" #: protocols/yahoo/yahoochatsession.cpp:65 msgid "Yahoo Display Picture" msgstr "Yahoo 顯示圖片" #: protocols/yahoo/yahooconferencemessagemanager.cpp:50 msgid "&Invite others" msgstr "邀請其他人(&I)" #: protocols/yahoo/yahoocontact.cpp:117 msgid "%1|Stealthed" msgstr "%1|秘密檢視" #: protocols/yahoo/yahoocontact.cpp:369 msgid "View &Webcam" msgstr "檢視視訊(&W)" #: protocols/yahoo/yahoocontact.cpp:391 msgid "&Buzz Contact" msgstr "呼叫聯絡人(&B)" #: protocols/yahoo/yahoocontact.cpp:401 msgid "&Stealth Setting" msgstr "秘密設定(&S)" #: protocols/yahoo/yahoocontact.cpp:411 msgid "&Invite to Conference" msgstr "邀請到會議(&I)" #: protocols/yahoo/yahoocontact.cpp:421 msgid "&View Yahoo Profile" msgstr "檢視 Yahoo 設定檔(&V)" #: protocols/yahoo/yahoocontact.cpp:465 msgid "Stealth Setting" msgstr "秘密設定" #: protocols/yahoo/yahoocontact.cpp:519 msgid "Buzzz!!!" msgstr "呼叫!呼叫!聽到請回答!" #: protocols/yahoo/yahoocontact.cpp:609 protocols/yahoo/yahoocontact.cpp:664 msgid "" "I cannot find the jasper image convert program.\n" "jasper is required to render the yahoo webcam images.\n" "Please see %1 for further information." msgstr "" "找不到 Jasper 影像轉換程式。\n" "要使用 Yahoo 視訊功能必須要有 jasper。\n" "詳情請參考 %1。" #: protocols/yahoo/yahooeditaccount.cpp:108 #: protocols/yahoo/yahooeditaccount.cpp:113 msgid "Yahoo" msgstr "Yahoo" #: protocols/yahoo/yahooeditaccount.cpp:113 msgid "You must enter a valid password." msgstr "您必須輸入正確的密碼。" #: protocols/yahoo/yahooeditaccount.cpp:167 msgid "Yahoo Buddy Icon" msgstr "Yahoo 好友圖示" #: protocols/yahoo/yahooeditaccount.cpp:186 msgid "" "The selected buddy icon could not be opened.
Please set a new buddy " "icon.
" msgstr "所選取的好友圖示無法開啟。
請設定新的好友圖示。
" #: protocols/yahoo/yahooprotocol.cpp:44 msgid "Be right back" msgstr "馬上回來" #: protocols/yahoo/yahooprotocol.cpp:46 msgid "Not at home" msgstr "不在家" #: protocols/yahoo/yahooprotocol.cpp:47 msgid "Not at my desk" msgstr "不在桌前" #: protocols/yahoo/yahooprotocol.cpp:48 msgid "Not in the office" msgstr "不在辦公室" #: protocols/yahoo/yahooprotocol.cpp:49 msgid "On the phone" msgstr "電話中" #: protocols/yahoo/yahooprotocol.cpp:50 msgid "On vacation" msgstr "休假中" #: protocols/yahoo/yahooprotocol.cpp:51 msgid "Out to lunch" msgstr "外出用餐" #: protocols/yahoo/yahooprotocol.cpp:52 msgid "Stepped out" msgstr "離開" #: protocols/yahoo/yahooprotocol.cpp:54 msgid "Custom" msgstr "自訂" #: protocols/yahoo/yahooprotocol.cpp:58 msgid "Buddy Icon Checksum" msgstr "好友圖示檢查碼" #: protocols/yahoo/yahooprotocol.cpp:59 msgid "Buddy Icon Expire" msgstr "好友圖示過期" #: protocols/yahoo/yahooprotocol.cpp:60 msgid "Buddy Icon Remote Url" msgstr "好友圖示遠端網址" #: protocols/yahoo/yahooprotocol.cpp:68 msgid "YAB Id" msgstr "YAB Id" #: protocols/yahoo/yahooprotocol.cpp:69 msgid "Pager number" msgstr "呼叫器號碼" #: protocols/yahoo/yahooprotocol.cpp:70 msgid "Fax number" msgstr "傳真號碼" #: protocols/yahoo/yahooprotocol.cpp:71 msgid "Additional number" msgstr "額外號碼" #: protocols/yahoo/yahooprotocol.cpp:72 protocols/yahoo/yahooprotocol.cpp:73 msgid "Alternative email 1" msgstr "其他的電子郵件地址 1" #: protocols/yahoo/yahooprotocol.cpp:75 msgid "GoogleTalk" msgstr "GoogleTalk" #: protocols/yahoo/yahooprotocol.cpp:76 msgid "Skype" msgstr "Skype" #: protocols/irc/ircchatui.rc:5 protocols/yahoo/yahooprotocol.cpp:77 #, no-c-format msgid "IRC" msgstr "IRC" #: protocols/yahoo/yahooprotocol.cpp:78 msgid "QQ" msgstr "QQ" #: protocols/yahoo/yahooprotocol.cpp:79 msgid "Private Address" msgstr "私人位址" #: protocols/yahoo/yahooprotocol.cpp:80 msgid "Private City" msgstr "私人城市" #: protocols/yahoo/yahooprotocol.cpp:81 msgid "Private State" msgstr "私人州/省" #: protocols/yahoo/yahooprotocol.cpp:82 msgid "Private ZIP" msgstr "私人郵遞區號" #: protocols/yahoo/yahooprotocol.cpp:83 msgid "Private Country" msgstr "私人國家" #: protocols/yahoo/yahooprotocol.cpp:85 msgid "Private URL" msgstr "私人網址" #: protocols/yahoo/yahooprotocol.cpp:86 msgid "Corporation" msgstr "公司" #: protocols/yahoo/yahooprotocol.cpp:87 msgid "Work Address" msgstr "工作地址" #: protocols/yahoo/yahooprotocol.cpp:89 msgid "Work State" msgstr "工作州/省" #: protocols/yahoo/yahooprotocol.cpp:90 msgid "Work ZIP" msgstr "工作郵遞區號" #: protocols/yahoo/yahooprotocol.cpp:93 msgid "Work URL" msgstr "工作網址" #: protocols/yahoo/yahooprotocol.cpp:95 msgid "Anniversary" msgstr "週年紀念" #: protocols/yahoo/yahooprotocol.cpp:96 msgid "Notes" msgstr "備忘" #: protocols/yahoo/yahooprotocol.cpp:97 msgid "Additional 1" msgstr "額外屬性 1" #: protocols/yahoo/yahooprotocol.cpp:98 msgid "Additional 2" msgstr "額外屬性 2" #: protocols/yahoo/yahooprotocol.cpp:99 msgid "Additional 3" msgstr "額外屬性 3" #: protocols/yahoo/yahooprotocol.cpp:100 msgid "Additional 4" msgstr "額外屬性 4" #: protocols/yahoo/yahooverifyaccount.cpp:41 msgid "Account Verification - Yahoo" msgstr "帳號檢查 - Yahoo" #: kopete/addaccountwizard/addaccountwizardpage1.ui:22 #, no-c-format msgid "Step One: Select Messaging Service" msgstr "步驟一: 選取傳訊服務" #: kopete/addaccountwizard/addaccountwizardpage1.ui:121 #, no-c-format msgid "" "

Welcome to the Add Account Wizard

\n" "

Select the messaging service from the list below.

" msgstr "" "

歡迎使用加入帳號精靈

\n" "

請從下列清單中選擇即時傳訊服務。

" #: kopete/addaccountwizard/addaccountwizardpage2.ui:16 #: kopete/addaccountwizard/addaccountwizardpage3.ui:16 #: kopete/addcontactwizard/addcontactwizard_base.ui:420 #, no-c-format msgid "Finished" msgstr "已完成" #: kopete/addaccountwizard/addaccountwizardpage2.ui:38 #, no-c-format msgid "" "

Congratulations

\n" "

You have finished configuring the account. Please click the \"Finish\" " "button.

" msgstr "" "

恭喜

\n" "

您已經完成設定這個帳號。請按「完成」按鈕。

" #: kopete/addaccountwizard/addaccountwizardpage2.ui:58 #: kopete/addaccountwizard/addaccountwizardpage3.ui:60 #, no-c-format msgid "" "Use &custom color\n" "for account:" msgstr "帳號使用自訂顏色(&C)" #: kopete/addaccountwizard/addaccountwizardpage2.ui:62 #: kopete/addaccountwizard/addaccountwizardpage3.ui:64 #, no-c-format msgid "Use a custom color for this account" msgstr "這個帳號使用自訂顏色" #: kopete/addaccountwizard/addaccountwizardpage2.ui:65 #: kopete/addaccountwizard/addaccountwizardpage3.ui:67 #, no-c-format msgid "" "Account are often differentiated by the protocol icon. But if you have " "severals accounts of the same protocol, you may apply a color filter to that " "icon to differentiate accounts from the same protocols." msgstr "" "通常帳號是以協定來區分。不過如果您在一個通訊協定中有多個帳號,您可以使用顏色" "來區別。" #: kopete/addaccountwizard/addaccountwizardpage2.ui:76 #: kopete/addaccountwizard/addaccountwizardpage3.ui:78 #: kopete/config/accounts/kopeteaccountconfigbase.ui:117 #, no-c-format msgid "Account custom color selector" msgstr "帳號自訂顏色選擇器" #: kopete/addaccountwizard/addaccountwizardpage2.ui:131 #: kopete/addaccountwizard/addaccountwizardpage3.ui:133 #, no-c-format msgid "Co&nnect now" msgstr "現在就連線(&N)" #: kopete/addaccountwizard/addaccountwizardpage2.ui:137 #: kopete/addaccountwizard/addaccountwizardpage3.ui:139 #, no-c-format msgid "Connect right after Finish is pressed" msgstr "按下「完成」之後就連線" #: kopete/addaccountwizard/addaccountwizardpage2.ui:140 #: kopete/addaccountwizard/addaccountwizardpage3.ui:142 #, no-c-format msgid "" "If this is checked, the account will be connected right after you clicked on " "Finished." msgstr "勾選此選項的話,在您按下完成鍵之後,就會馬上開始連線。" #: kopete/addaccountwizard/addaccountwizardpage3.ui:38 #, no-c-format msgid "" "

Congratulations

\n" "

You have finished configuring the account. Please click the \"Finish\" " "button.

\n" "\n" msgstr "" "

恭喜

\n" "

此帳號已設定完成。請按下「完成」鍵。

\n" "\n" #: kopete/addcontactwizard/addcontactwizard_base.ui:16 #, no-c-format msgid "Contact Addition Wizard" msgstr "加入聯絡人精靈" #: kopete/addcontactwizard/addcontactwizard_base.ui:23 #, no-c-format msgid "Introduction" msgstr "介紹" # 使用「加入」(add) 以與「新增」(create, new)等等做分別 # 因為連絡人是「已經存在」、我們只是加進去清單裡面而已。 # 05/11/12:some cleanup! #: kopete/addcontactwizard/addcontactwizard_base.ui:42 #, no-c-format msgid "" "

Welcome to the Add Contact Wizard

\n" "\n" "

This wizard will guide you through the process of adding a new contact to " "Kopete.

" msgstr "" "

歡迎使用加入聯絡人精靈

\n" "\n" "

這個精靈將引導您在 Kopete 中加入聯絡人。

" #: kopete/addcontactwizard/addcontactwizard_base.ui:55 #, no-c-format msgid "" "

Kopete shares contact information with the TDE Addressbook. This gives " "you seamless integration between instant messaging, e-mail and other " "personal information management applications.

\n" "

If you prefer not to store instant messaging information in the TDE " "Addressbook, uncheck the box below.

" msgstr "" "

Kopete 與 TDE 通訊錄共享聯絡人資訊。這提供您在即時通訊、電子郵件及其他個人" "資訊管理程式之間的最佳整合。

\n" "

如果您不想在 TDE 通訊錄中儲存即時通訊的資訊,請取消勾選下面的選項。

" #: kopete/addcontactwizard/addcontactwizard_base.ui:64 #, no-c-format msgid "

Press the \"Next\" button to begin.

" msgstr "

請按「下一步」按鈕開始。

" #: kopete/addcontactwizard/addcontactwizard_base.ui:123 #, no-c-format msgid "&Use the TDE address book for this contact" msgstr "對這個聯絡人使用 TDE 通訊錄(&U)" #: kopete/addcontactwizard/addcontactwizard_base.ui:129 #, no-c-format msgid "" "Check this box if you do not want to integrate other TDE applications with " "Kopete" msgstr "如果您不想將 Kopete 與其他 TDE 應用程式整合,請勾選此選項" #: kopete/addcontactwizard/addcontactwizard_base.ui:156 #, no-c-format msgid "Select Address Book Entry" msgstr "選擇通訊錄項目" #: kopete/addcontactwizard/addcontactwizard_base.ui:169 #, no-c-format msgid "Select Display Name & Group" msgstr "選擇顯示名稱及群組" #: kopete/addcontactwizard/addcontactwizard_base.ui:180 #, no-c-format msgid "

Select Display Name and Group

" msgstr "

選擇顯示名稱及群組

" #: kopete/addcontactwizard/addcontactwizard_base.ui:194 #, no-c-format msgid "" "Enter the contact's displa&y name. This is how the contact will appear in " "Kopete:" msgstr "輸入聯絡人的顯示名稱。Kopete 將用來顯示此聯絡人(&Y):" #: kopete/addcontactwizard/addcontactwizard_base.ui:205 #, no-c-format msgid "Leave this blank to use any display name set by the contact" msgstr "保留此欄空白,以使用聯絡人自行設定的顯示名稱" #: kopete/addcontactwizard/addcontactwizard_base.ui:244 #, no-c-format msgid "Select the contact list &group(s) that this contact should belong to :" msgstr "選擇聯絡人所屬的聯絡人清單群組(&G):" #: kopete/addcontactwizard/addcontactwizard_base.ui:256 #, no-c-format msgid "Groups" msgstr "群組" #: kopete/addcontactwizard/addcontactwizard_base.ui:272 #, no-c-format msgid "A contact may be present in more than one group" msgstr "聯絡人可在多個群組中出現" #: kopete/addcontactwizard/addcontactwizard_base.ui:280 #, no-c-format msgid "Create New G&roup..." msgstr "新增群組(&G)..." #: kopete/addcontactwizard/addcontactwizard_base.ui:283 #, no-c-format msgid "Click here to create a new group" msgstr "按此新增群組" #: kopete/addcontactwizard/addcontactwizard_base.ui:310 #: kopete/addcontactwizard/fastaddcontactwizard_base.ui:23 #, no-c-format msgid "Select Instant Messaging Accounts" msgstr "選擇即時通訊帳號" #: kopete/addcontactwizard/addcontactwizard_base.ui:321 #, no-c-format msgid "

Select Instant Messaging Accounts

" msgstr "

選擇即時通訊服務帳號

" #: kopete/addcontactwizard/addcontactwizard_base.ui:332 #, no-c-format msgid "" "Select the &account(s) you would like to use for this contact from the list " "below." msgstr "從下列清單,選擇您想用來與他/她聯絡的帳號。(&A)" #: kopete/addcontactwizard/addcontactwizard_base.ui:343 #, no-c-format msgid "" "

Note: If a messaging service is missing from the list, please make " "sure you have created an account for it in Kopete, and that it ready to add " "new contacts.

" msgstr "" "

注意: 如果清單中找不到某個傳訊服務,請確定您已在 Kopete 中建立了使" "用該服務的帳號,並且已經準備好加入新的聯絡人了。

" #: kopete/addcontactwizard/addcontactwizard_base.ui:349 #: kopete/addcontactwizard/fastaddcontactwizard_base.ui:86 #: kopete/config/accounts/kopeteaccountconfigbase.ui:79 #: plugins/smpppdcs/smpppdcsprefs.ui:224 #, no-c-format msgid "Account" msgstr "帳號" #: kopete/addcontactwizard/addcontactwizard_base.ui:360 #: kopete/addcontactwizard/fastaddcontactwizard_base.ui:97 #: kopete/config/accounts/kopeteaccountconfigbase.ui:68 #, no-c-format msgid "Protocol" msgstr "即時通訊協定" #: kopete/addcontactwizard/addcontactwizard_base.ui:379 #: kopete/addcontactwizard/fastaddcontactwizard_base.ui:113 #, no-c-format msgid "" "Select the Instant Messaging systems to message the contact. If they use " "more than one IM system, select them all here" msgstr "選擇此聯絡人使用的即時通訊系統。如果他們使用不只一個系統,請全部選擇。" #: kopete/addcontactwizard/addcontactwizard_base.ui:399 #: kopete/addcontactwizard/addcontactwizard_base.ui:410 #, no-c-format msgid "" "How do you want to message the contact? If they use more than one Instant " "Messaging system, select them all here" msgstr "" "您要如何傳訊給這位聯絡人?如果他/她們不止使用一個即時通訊系統,請在此全部選" "取。" #: kopete/addcontactwizard/addcontactwizard_base.ui:407 #, no-c-format msgid "You can always add more ways to message this contact later." msgstr "您稍後可以加入更多這個聯絡人的傳訊方式。" #: kopete/addcontactwizard/addcontactwizard_base.ui:439 #, no-c-format msgid "" "

Congratulations

\n" "\n" "

You have finished configuring a contact. Please click Finish and your " "contact will be added to your contact list.

\n" "\n" "

Note: If adding this contact requires authorization from one or " "more of the messaging services, Kopete may prompt you for further " "information after this screen.

" msgstr "" "

恭喜

\n" "\n" "

您已經完成聯絡人的設定了。請按完成以加入到聯絡人清單。

\n" "\n" "

注意:如果加入的聯絡人,所用的即時服務需要對方認可,Kopete 稍後會提" "示您更多資訊。

" #: kopete/addcontactwizard/fastaddcontactwizard_base.ui:16 #, no-c-format msgid "Fast Contact Addition Wizard" msgstr "快速新增聯絡人精靈" #: kopete/addcontactwizard/fastaddcontactwizard_base.ui:80 #, no-c-format msgid "

Select IM Accounts

" msgstr "

選擇即時通訊帳號

" #: kopete/addcontactwizard/fastaddcontactwizard_base.ui:125 #, no-c-format msgid "Done" msgstr "完成" #: kopete/addcontactwizard/fastaddcontactwizard_base.ui:182 #, no-c-format msgid "" "

Contact added.

\n" "

That was fast.

" msgstr "" "

聯絡人已加入

\n" "

吧。

" #: kopete/chatwindow/kopetechatwindow.rc:5 #: kopete/chatwindow/kopeteemailwindow.rc:5 protocols/groupwise/gwchatui.rc:5 #: protocols/jabber/jabberchatui.rc:5 protocols/yahoo/yahooconferenceui.rc:5 #, no-c-format msgid "&Chat" msgstr "聊天(&C)" #: kopete/chatwindow/kopetechatwindow.rc:18 #: kopete/chatwindow/kopeteemailwindow.rc:14 #, no-c-format msgid "&Format" msgstr "格式(&F)" #: kopete/chatwindow/kopetechatwindow.rc:23 #, no-c-format msgid "&Tabs" msgstr "分頁(&T)" #: kopete/chatwindow/kopetechatwindow.rc:35 #, no-c-format msgid "&Chat Members List" msgstr "聊天成員清單(&C)" #: kopete/chatwindow/kopetechatwindow.rc:57 #: kopete/chatwindow/kopeteemailwindow.rc:41 protocols/gadu/ui/gaduawayui.ui:47 #: protocols/gadu/ui/gadusearch.ui:414 #: protocols/groupwise/ui/gwcontactsearch.ui:267 #, no-c-format msgid "Status" msgstr "狀態" #: kopete/chatwindow/kopetechatwindow.rc:60 #: kopete/chatwindow/kopeterichtexteditpartfull.rc:32 #, no-c-format msgid "Format Toolbar" msgstr "格式工具列" #: kopete/chatwindow/kopeterichtexteditpartfull.rc:4 #, no-c-format msgid "F&ormat" msgstr "格式(&O)" #: kopete/chatwindow/kopeterichtexteditpartfull.rc:11 #, no-c-format msgid "&Alignment" msgstr "對齊方式(&A)" #: kopete/config/accounts/kopeteaccountconfigbase.ui:17 #, no-c-format msgid "Manage Accounts" msgstr "管理帳號" #: kopete/config/accounts/kopeteaccountconfigbase.ui:31 #: protocols/irc/ui/networkconfig.ui:196 #, no-c-format msgid "&New..." msgstr "新增(&N)..." #: kopete/config/accounts/kopeteaccountconfigbase.ui:34 #, no-c-format msgid "Add new account" msgstr "加入新的帳號" #: kopete/config/accounts/kopeteaccountconfigbase.ui:42 #, no-c-format msgid "&Modify..." msgstr "修改(&M)..." #: kopete/config/accounts/kopeteaccountconfigbase.ui:45 #, no-c-format msgid "Modify selected account" msgstr "修改選取的帳號" #: kopete/config/accounts/kopeteaccountconfigbase.ui:48 #, no-c-format msgid "Let you edit the account's properties." msgstr "讓您編輯這個帳號的屬性" #: kopete/config/accounts/kopeteaccountconfigbase.ui:59 #: kopete/config/accounts/kopeteaccountconfigbase.ui:62 #, no-c-format msgid "Remove selected account" msgstr "移除選取的帳號" #: kopete/config/accounts/kopeteaccountconfigbase.ui:100 #, no-c-format msgid "Use &custom color" msgstr "使用自訂顏色(&C)" #: kopete/config/accounts/kopeteaccountconfigbase.ui:103 #, no-c-format msgid "Use custom color for account" msgstr "帳號使用自訂顏色" #: kopete/config/accounts/kopeteaccountconfigbase.ui:106 #, no-c-format msgid "Allows you to set a custom color for this account" msgstr "讓您設定這個帳號的顏色" #: kopete/config/accounts/kopeteaccountconfigbase.ui:120 #, no-c-format msgid "" "Allows you to set a custom color for this account.\n" "The icon of every contact of this account will be coloured with this color. " "Useful if you have several accounts of the same protocol" msgstr "" "讓您設定這個帳號的顏色。\n" "這個帳號中所有聯絡人的圖示都會抹上這個顏色。當您有同一種即時傳訊協定的多個帳" "號時很有用。" #: kopete/config/accounts/kopeteaccountconfigbase.ui:163 #, no-c-format msgid "Increase the priority" msgstr "提高優先權" #: kopete/config/accounts/kopeteaccountconfigbase.ui:166 #: kopete/config/accounts/kopeteaccountconfigbase.ui:204 #, no-c-format msgid "" "Uses these buttons to increase or decrease the priority.\n" "The priority is used to determine which contact to use when you click on a " "metacontact: Kopete will use the contact of the account with the greatest " "priority (if all contacts have the same online status.)" msgstr "" "使用這些按鈕來提高或降低優先權。\n" "優先權是當您按了某個整合聯絡人時,用來判斷要使用哪一個聯絡人:Kopete會使用帳" "號具有最高優先權的聯絡人(如果其中的整合聯絡人中的所有聯絡人都有一樣的上線狀" "態。)" #: kopete/config/accounts/kopeteaccountconfigbase.ui:201 #, no-c-format msgid "Decrease the priority" msgstr "降低優先權" #: kopete/config/appearance/appearanceconfig_chatwindow.ui:24 #, no-c-format msgid "Chat Window Appearance" msgstr "聊天視窗外觀" #: kopete/config/appearance/appearanceconfig_chatwindow.ui:43 #, no-c-format msgid "Styles" msgstr "樣式" #: kopete/config/appearance/appearanceconfig_chatwindow.ui:113 #, no-c-format msgid "&Get New..." msgstr "抓新的(&G)..." #: kopete/config/appearance/appearanceconfig_chatwindow.ui:116 #, no-c-format msgid "Get new Chat Window styles over the Internet" msgstr "在網路上抓取新的聊天室視窗風格" #: kopete/config/appearance/appearanceconfig_chatwindow.ui:124 #, no-c-format msgid "&Install..." msgstr "安裝(&I)..." #: kopete/config/appearance/appearanceconfig_chatwindow.ui:142 #, no-c-format msgid "Style Variant:" msgstr "風格變化:" #: kopete/config/appearance/appearanceconfig_chatwindow.ui:165 #, no-c-format msgid "Display" msgstr "顯示" #: kopete/config/appearance/appearanceconfig_chatwindow.ui:176 #, no-c-format msgid "Group consecuti&ve messages" msgstr "將連續訊息群組起來(&V)" #: kopete/config/appearance/appearanceconfig_colors.ui:16 #: plugins/texteffect/texteffectprefs.ui:46 #, no-c-format msgid "Colors" msgstr "顏色" #: kopete/config/appearance/appearanceconfig_colors.ui:44 #, no-c-format msgid "Base font:" msgstr "基本字型:" #: kopete/config/appearance/appearanceconfig_colors.ui:60 #, no-c-format msgid "Highlight foreground:" msgstr "高亮度前景:" #: kopete/config/appearance/appearanceconfig_colors.ui:91 #, no-c-format msgid "Base font color:" msgstr "基本字型顏色:" #: kopete/config/appearance/appearanceconfig_colors.ui:122 #, no-c-format msgid "Highlight background:" msgstr "高亮度背景:" #: kopete/config/appearance/appearanceconfig_colors.ui:130 #, no-c-format msgid "Link color:" msgstr "超連結顏色:" #: kopete/config/appearance/appearanceconfig_colors.ui:138 #, no-c-format msgid "Background color:" msgstr "背景顏色:" #: kopete/config/appearance/appearanceconfig_colors.ui:153 #, no-c-format msgid "Formatting Overrides" msgstr "覆蓋格式" #: kopete/config/appearance/appearanceconfig_colors.ui:164 #, no-c-format msgid "Do not show user specified &background color" msgstr "不要顯示使用者指定的背景顏色(&B)" #: kopete/config/appearance/appearanceconfig_colors.ui:172 #, no-c-format msgid "Do not show user specified &foreground color" msgstr "不要顯示使用者指定的前景顏色(&F)" #: kopete/config/appearance/appearanceconfig_colors.ui:180 #, no-c-format msgid "Do not show user specified &rich text" msgstr "不要顯示使用者指定的 Rich Text (&R)" #: kopete/config/appearance/appearanceconfig_colors.ui:201 #, no-c-format msgid "Use custom fonts for contact list items" msgstr "聯絡人清單項目使用自訂字型" #: kopete/config/appearance/appearanceconfig_colors.ui:253 #, fuzzy, no-c-format msgid "Group font:" msgstr "群組聊天" #: kopete/config/appearance/appearanceconfig_colors.ui:282 #, no-c-format msgid "Normal font:" msgstr "正常字型:" #: kopete/config/appearance/appearanceconfig_colors.ui:311 #, no-c-format msgid "Small font:" msgstr "小字型:" #: kopete/config/appearance/appearanceconfig_colors.ui:360 #, no-c-format msgid "Recolor contacts marked as idle:" msgstr "變更閒置的聯絡人的顏色" #: kopete/config/appearance/appearanceconfig_colors.ui:368 #, no-c-format msgid "Group name color:" msgstr "群組顏色:" #: kopete/config/appearance/appearanceconfig_contactlist.ui:16 #, no-c-format msgid "Contact List Appearance" msgstr "聯絡人清單外觀" #: kopete/config/appearance/appearanceconfig_contactlist.ui:35 #, no-c-format msgid "Layout" msgstr "版面" #: kopete/config/appearance/appearanceconfig_contactlist.ui:46 #, no-c-format msgid "Arrange metacontacts by &group" msgstr "依群組排列整合聯絡人(&G)" #: kopete/config/appearance/appearanceconfig_contactlist.ui:54 #, no-c-format msgid "Show tree &branch lines" msgstr "顯示樹狀分支線(&B)" #: kopete/config/appearance/appearanceconfig_contactlist.ui:87 #, no-c-format msgid "In&dent contacts" msgstr "縮排聯絡人(&D)" #: kopete/config/appearance/appearanceconfig_contactlist.ui:99 #, no-c-format msgid "Contact Display Mode" msgstr "聯絡人顯示模式" #: kopete/config/appearance/appearanceconfig_contactlist.ui:110 #, no-c-format msgid "List Style" msgstr "清單風格" #: kopete/config/appearance/appearanceconfig_contactlist.ui:121 #, no-c-format msgid "&Classic, left-aligned status icons" msgstr "傳統模式,狀態圖示向左對齊(&C)" #: kopete/config/appearance/appearanceconfig_contactlist.ui:124 #, no-c-format msgid "Alt+C" msgstr "" #: kopete/config/appearance/appearanceconfig_contactlist.ui:135 #, no-c-format msgid "&Right-aligned status icons" msgstr "狀態圖示向右對齊(&R)" #: kopete/config/appearance/appearanceconfig_contactlist.ui:138 #, no-c-format msgid "Alt+R" msgstr "" #: kopete/config/appearance/appearanceconfig_contactlist.ui:146 #, no-c-format msgid "Detailed &view" msgstr "詳細模式,顯示離開/個人化訊息(&V)" #: kopete/config/appearance/appearanceconfig_contactlist.ui:149 #, no-c-format msgid "Alt+V" msgstr "" #: kopete/config/appearance/appearanceconfig_contactlist.ui:159 #, no-c-format msgid "Use contact photos when available" msgstr "聯絡人有相片時就用" #: kopete/config/appearance/appearanceconfig_contactlist.ui:171 #, fuzzy, no-c-format msgid "Displayed Theme Path" msgstr "顯示名稱" #: kopete/config/appearance/appearanceconfig_contactlist.ui:192 #, no-c-format msgid "Contact List Animations" msgstr "聯絡人清單動畫效果" #: kopete/config/appearance/appearanceconfig_contactlist.ui:203 #, no-c-format msgid "&Animate changes to contact list items" msgstr "聯絡人清單的項目有變更時以動畫表示(&A)" #: kopete/config/appearance/appearanceconfig_contactlist.ui:206 #, no-c-format msgid "Alt+A" msgstr "" #: kopete/config/appearance/appearanceconfig_contactlist.ui:214 #, no-c-format msgid "Fade in / out contacts as the&y appear / disappear" msgstr "當聯絡人出現/消失時,以淡入/淡出表示(&Y)" #: kopete/config/appearance/appearanceconfig_contactlist.ui:222 #, no-c-format msgid "Fo&ld in / out contacts as they appear / disappear" msgstr "當聯絡人出現/消失時,以折起/拉開表示(&L)" #: kopete/config/appearance/appearanceconfig_contactlist.ui:232 #, no-c-format msgid "Contact List Auto-Hide" msgstr "聯絡人清單自動隱藏" #: kopete/config/appearance/appearanceconfig_contactlist.ui:235 #, no-c-format msgid "" "When enabled, the contact list will automatically be hidden a fixed amount " "of time after the mouse cursor leaves the window. You can set the amount of " "time in the 'Time until autohide' box below." msgstr "" "當啟用的時候,聯絡人清單在游標離開視窗後一段時間就會自動隱藏。您可以在下面的" "「自動隱藏時間」方塊中設定時間" #: kopete/config/appearance/appearanceconfig_contactlist.ui:246 #, no-c-format msgid "A&uto-hide contact list" msgstr "自動隱藏聯絡人清單(&U)" #: kopete/config/appearance/appearanceconfig_contactlist.ui:282 #: kopete/config/behavior/behaviorconfig_events.ui:202 #, no-c-format msgid " Sec" msgstr " 秒" #: kopete/config/appearance/appearanceconfig_contactlist.ui:294 #, no-c-format msgid "The timeout value for both contact list and scrollbar auto-hiding." msgstr "聯絡人清單及垂直捲軸的自動隱藏時間。" #: kopete/config/appearance/appearanceconfig_contactlist.ui:305 #, no-c-format msgid "after the cursor left the window" msgstr "游標離開視窗後" #: kopete/config/appearance/appearanceconfig_contactlist.ui:342 #, no-c-format msgid "Change &Tooltip Contents..." msgstr "變更提示內容(&T)..." #: kopete/config/appearance/appearanceconfig_emoticons.ui:24 #, no-c-format msgid "&Use emoticons" msgstr "使用表情圖示(&U)" #: kopete/config/appearance/appearanceconfig_emoticons.ui:30 #, no-c-format msgid "" "If this is checked, the text representation of emoticons in messages will be " "replaced by an image" msgstr "若勾選本選項,文字形式的表情圖示將會以影像來取代" #: kopete/config/appearance/appearanceconfig_emoticons.ui:38 #, no-c-format msgid "&Require separators (spaces) around emoticons" msgstr "表情圖示必須以空白隔開(&R)" #: kopete/config/appearance/appearanceconfig_emoticons.ui:44 #, no-c-format msgid "" "If this is checked, only emoticons that are separated from the text by " "spaces will be shown as images." msgstr "如果勾選此選項,則只有以空白跟文字隔開的表情圖示會以圖形來顯示。" #: kopete/config/appearance/appearanceconfig_emoticons.ui:55 #, no-c-format msgid "Select emoticon theme:" msgstr "選取表情圖示主題:" #: kopete/config/appearance/appearanceconfig_emoticons.ui:68 #, no-c-format msgid "Preview:" msgstr "預覽:" #: kopete/config/appearance/appearanceconfig_emoticons.ui:106 #, no-c-format msgid "&Get New Themes..." msgstr "抓取新的主題(&G)..." #: kopete/config/appearance/appearanceconfig_emoticons.ui:109 #, no-c-format msgid "Download emoticon theme from the Internet" msgstr "從網路上下載新的表情圖示主題" #: kopete/config/appearance/appearanceconfig_emoticons.ui:117 #: kopete/config/appearance/appearanceconfig_emoticons.ui:128 #, fuzzy, no-c-format msgid "&Edit Theme..." msgstr "編輯(&E)..." #: kopete/config/appearance/appearanceconfig_emoticons.ui:120 #: kopete/config/appearance/appearanceconfig_emoticons.ui:131 #, fuzzy, no-c-format msgid "Edit the selected emoticons theme" msgstr "選取表情圖示主題:" #: kopete/config/appearance/appearanceconfig_emoticons.ui:139 #, no-c-format msgid "&Install Theme File..." msgstr "安裝主題檔案(&I)..." #: kopete/config/appearance/appearanceconfig_emoticons.ui:155 #, no-c-format msgid "Remove Theme" msgstr "移除主題" #: kopete/config/appearance/emoticonseditwidget.ui:16 #, fuzzy, no-c-format msgid "EmoticonsEditWidget" msgstr "表情圖示(&E)" #: kopete/config/appearance/emoticonseditwidget.ui:35 #, fuzzy, no-c-format msgid "Add..." msgstr "新增(&A)..." #: kopete/config/appearance/tooltipeditwidget.ui:46 #, no-c-format msgid "" "Using the arrow buttons, put on the right the items you want to see in the " "contact tooltips. You can then sort them." msgstr "使用箭頭按鈕,將您想在聯絡人提示中看到的項目移到右邊。您可以排序它們。" #: kopete/config/appearance/tooltipeditwidget.ui:57 #, no-c-format msgid "Here you can customize the contact tooltips" msgstr "在此您可以自訂聯絡人提示" #: kopete/config/appearance/tooltipeditwidget.ui:87 #, no-c-format msgid "" "This list contains elements which are currently not present in the " "contact tooltip." msgstr "本清單包含目前不在提示中的項目。" #: kopete/config/appearance/tooltipeditwidget.ui:128 #, no-c-format msgid "v" msgstr "↓" #: kopete/config/appearance/tooltipeditwidget.ui:131 #, no-c-format msgid "Use this arrow to reorder the items in the list." msgstr "使用這些箭頭來重新排序清單中的項目。" #: kopete/config/appearance/tooltipeditwidget.ui:139 #, no-c-format msgid "^" msgstr "↑" #: kopete/config/appearance/tooltipeditwidget.ui:147 #, no-c-format msgid "<" msgstr "←" #: kopete/config/appearance/tooltipeditwidget.ui:155 #, no-c-format msgid ">" msgstr ">" #: kopete/config/appearance/tooltipeditwidget.ui:158 #, no-c-format msgid "Use this arrows to add or remove items to your contact tooltips." msgstr "使用這些箭頭來加入或移除提示中的項目。" #: kopete/config/appearance/tooltipeditwidget.ui:201 #, no-c-format msgid "" "This list contains elements which are currently present in the " "contact tooltips." msgstr "本清單包含目前提示中的項目。" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:24 #, no-c-format msgid "Video" msgstr "視訊" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:47 #, no-c-format msgid "Device" msgstr "裝置" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:66 #, no-c-format msgid "&Video Device Configuration" msgstr "視訊裝置設定(&V)" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:93 #: protocols/sms/services/gsmlibprefs.ui:79 #, no-c-format msgid "Device:" msgstr "裝置:" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:101 #, no-c-format msgid "Input:" msgstr "輸入:" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:109 #, no-c-format msgid "Standard:" msgstr "標準:" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:174 #, no-c-format msgid "Con&trols" msgstr "控制(&T)" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:193 #, no-c-format msgid "&Image Adjustment" msgstr "影像調整(&I)" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:228 #, no-c-format msgid "Brightness:" msgstr "亮度:" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:244 #, no-c-format msgid "Contrast:" msgstr "對比:" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:260 #, no-c-format msgid "Saturation:" msgstr "飽和:" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:276 #, no-c-format msgid "Whiteness:" msgstr "白度:" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:292 #, no-c-format msgid "Hue:" msgstr "色調:" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:443 #, no-c-format msgid "Optio&ns" msgstr "選項(&N)" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:470 #, no-c-format msgid "Image options" msgstr "影像選項" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:489 #, no-c-format msgid "Au&tomatic brightness/contrast adjustment" msgstr "自動調整亮度/對比(&T)" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:505 #, no-c-format msgid "Automatic color correction" msgstr "自動色彩校正" #: kopete/config/avdevice/avdeviceconfig_videoconfig.ui:524 #, no-c-format msgid "See preview mirrored" msgstr "看鏡射預覽" #: kopete/config/behavior/behaviorconfig_chat.ui:27 #, no-c-format msgid "&Interface Preference" msgstr "介面喜好設定(&I)" #: kopete/config/behavior/behaviorconfig_chat.ui:90 #, no-c-format msgid "Chat Window Grouping &Policy" msgstr "聊天視窗群聚策略(&P)" #: kopete/config/behavior/behaviorconfig_chat.ui:99 #, no-c-format msgid "Open All Messages in New Chat Window" msgstr "每個聊天都開啟新的聊天視窗" #: kopete/config/behavior/behaviorconfig_chat.ui:104 #, no-c-format msgid "Group Messages From Same Account in Same Chat Window" msgstr "將相同帳號的訊息集中在同一個聊天視窗" #: kopete/config/behavior/behaviorconfig_chat.ui:109 #, no-c-format msgid "Group All Messages in Same Chat Window" msgstr "將所有訊息集中在同一個視窗" #: kopete/config/behavior/behaviorconfig_chat.ui:114 #, no-c-format msgid "Group Messages From Contacts in Same Group in Same Chat Window" msgstr "將來自相同群組的聯絡人的訊息集中在同一個視窗" #: kopete/config/behavior/behaviorconfig_chat.ui:119 #, no-c-format msgid "Group Messages From Same Metacontact in Same Chat Window" msgstr "將來自相同整合聯絡人的訊息集中在同一個視窗" #: kopete/config/behavior/behaviorconfig_chat.ui:126 #, no-c-format msgid "" "
\n" "
Open all messages in a new chat " "window\n" "
Every chat will have its own window.\n" "
Group messages from the same account " "in the same chat window\n" "
All chats for one account get grouped in " "to one window by using tabs.\n" "
Group all messages in the same chat " "window\n" "
All chats get grouped in to one window " "by using tabs.\n" "
Group messages from contacts in the " "same group in the same chat window\n" "
All chats from one group get grouped in " "to one window by using tabs.\n" "
Group messages from the same " "metacontact in the same chat window\n" "
All chats from one metacontact get " "grouped in to one window by using tabs.\n" "
\n" " " msgstr "" "
\n" "
每個聊天都開啟新的聊天視窗\n" "
每個聊天都會有自己的視窗。\n" "
將相同帳號的訊息集中在同一個聊天視窗\n" "
同一個帳號的所有聊天都會集中在同一個視窗,使用頁面來區分。\n" "
將所有訊息集中在同一個視窗\n" "
所有的聊天都會集中在同一個視窗,使用頁面來區分。\n" "
將來自相同群組的聯絡人的訊息集中在同一個視窗\n" "
所有來自相同群組聯絡人的訊息會集中在同一個視窗,使用頁面來區分。\n" "
將來自相同整合聯絡人的訊息集中在同一個視窗\n" "
所有來自相同整合聯絡人的訊息會集中在同一個視窗,使用頁面來區分。\n" "
" #: kopete/config/behavior/behaviorconfig_chat.ui:156 #, no-c-format msgid "High&light messages containing your nickname" msgstr "訊息包含您的暱稱時以高亮度顯示(&L)" #: kopete/config/behavior/behaviorconfig_chat.ui:172 #, no-c-format msgid "E&nable automatic spell checking" msgstr "啟用自動拼字檢查(&N)" #: kopete/config/behavior/behaviorconfig_chat.ui:180 #, no-c-format msgid "&Show events in chat window" msgstr "在聊天視窗中顯示事件(&S)" #: kopete/config/behavior/behaviorconfig_chat.ui:196 #, no-c-format msgid "T&runcate contact name with more characters than:" msgstr "聯絡人名稱超過此長度時予以截斷(&R):" #: kopete/config/behavior/behaviorconfig_chat.ui:245 #, no-c-format msgid "&Maximum number of chat window lines:" msgstr "聊天視窗中的最大行數(&M):" #: kopete/config/behavior/behaviorconfig_chat.ui:251 #, no-c-format msgid "" "Limit the maximum number of lines visible in a chat window to improve speed " "for complex layouts." msgstr "限制聊天視窗中可見的最大行數,當版面很複雜時可提升速度。" #: kopete/config/behavior/behaviorconfig_events.ui:16 #, no-c-format msgid "Events" msgstr "事件" #: kopete/config/behavior/behaviorconfig_events.ui:27 #, no-c-format msgid "Tray Flash && Bubble" msgstr "系統匣閃爍與泡泡訊息" #: kopete/config/behavior/behaviorconfig_events.ui:38 #, no-c-format msgid "Flash s&ystem tray" msgstr "閃爍系統匣(&Y)" #: kopete/config/behavior/behaviorconfig_events.ui:41 #, no-c-format msgid "Flash the system tray icon on an incoming message" msgstr "有新訊息時閃爍系統匣圖示" #: kopete/config/behavior/behaviorconfig_events.ui:44 #, no-c-format msgid "Flash the system tray icon whenever a message comes in." msgstr "有新訊息時閃爍系統匣圖示。" #: kopete/config/behavior/behaviorconfig_events.ui:80 #, no-c-format msgid "&Left mouse click opens message" msgstr "滑鼠左鍵開啟訊息視窗(&L)" #: kopete/config/behavior/behaviorconfig_events.ui:83 #, no-c-format msgid "" "Left mouse click on flashing system tray opens message instead of restoring/" "minimizing contact list" msgstr "" "系統匣圖示閃爍時,對圖示點選滑鼠左鍵用於開啟訊息視窗,而非放大/縮小聯絡人清" "單。" #: kopete/config/behavior/behaviorconfig_events.ui:86 #, no-c-format msgid "" "A left mouse click on the flashing system tray icon opens the incoming " "message instead of restoring/minimizing the contact list (e.g. to check who " "is sending messages). A middle click always opens this message." msgstr "" "系統匣圖示閃爍時,對圖示點選滑鼠左鍵用於開啟訊息視窗,而非放大/縮小聯絡人清" "單。滑鼠中鍵用於開啟此訊息。" #: kopete/config/behavior/behaviorconfig_events.ui:96 #, no-c-format msgid "Sho&w bubble" msgstr "顯示泡泡訊息(&W)" #: kopete/config/behavior/behaviorconfig_events.ui:99 #, no-c-format msgid "Show a bubble on an incoming message" msgstr "有新訊息時顯示泡泡訊息(Bubble)" #: kopete/config/behavior/behaviorconfig_events.ui:102 #, no-c-format msgid "Show a bubble whenever a message comes in." msgstr "有新訊息時顯示泡泡訊息(Bubble)。" #: kopete/config/behavior/behaviorconfig_events.ui:138 #, no-c-format msgid "Button \"&Ignore\" closes chat" msgstr "按下「忽略」鍵就關閉聊天視窗" #: kopete/config/behavior/behaviorconfig_events.ui:141 #, no-c-format msgid "" "The \"Ignore\" button of the bubble closes the chat window for the sender" msgstr "按下「忽略」鍵就關閉聊天視窗。" #: kopete/config/behavior/behaviorconfig_events.ui:144 #, no-c-format msgid "" "If there is already a chat window opened for the sender of the message " "displayed in the bubble the \"Ignore\" button will close this chat window." msgstr "" "如果已經有一個聊天視窗是與送出訊息的使用者聊天中的,則按下泡泡訊息中的「忽" "略」鍵會將該視窗一起關閉。" #: kopete/config/behavior/behaviorconfig_events.ui:182 #, no-c-format msgid "Close &bubble automatically after" msgstr "多久後關閉泡泡(&B):" #: kopete/config/behavior/behaviorconfig_events.ui:188 #, no-c-format msgid "Automatically close bubble after fixed amount of time" msgstr "在固定時間後自動關閉泡泡" #: kopete/config/behavior/behaviorconfig_events.ui:191 #, no-c-format msgid "" "Bubbles will automatically be closed after a fixed amount of time. A closed " "one will be replaced by a new one if another message is waiting." msgstr "" "在固定時間後泡泡會自動關閉。如果有新訊息進來,則會用新訊息的泡泡來取代。" #: kopete/config/behavior/behaviorconfig_events.ui:238 #, no-c-format msgid "Exclude non-highlighted messages in grou&p chats" msgstr "排除群組聊天中的非高亮度訊息(&P)" #: kopete/config/behavior/behaviorconfig_events.ui:241 #, no-c-format msgid "Notify only highlighted messages in group chats" msgstr "群組聊天時只通知高亮度訊息。" #: kopete/config/behavior/behaviorconfig_events.ui:244 #, no-c-format msgid "" "In very active group chats important messages can be singled out by " "excluding non-highlighted messages from notification." msgstr "" "在非常熱烈的群組聊天室中,您可以設定只有標示為高亮度(重要)訊息才會發出通" "知。" #: kopete/config/behavior/behaviorconfig_events.ui:252 #, no-c-format msgid "Exclude messages in chats on current des&ktop" msgstr "排除在目前桌面上的聊天訊息(&K)" #: kopete/config/behavior/behaviorconfig_events.ui:255 #, no-c-format msgid "" "Do not display notification for messages in chat windows on current desktop" msgstr "目前在桌面上的聊天訊息不要發出通知" #: kopete/config/behavior/behaviorconfig_events.ui:258 #, no-c-format msgid "" "This option allows you to turn off the notification of events for chat " "windows that are on the current desktop. If this option is turned on, then " "only chat windows on different desktops than the current one will notify you " "that an event has occured. Otherwise, all chat windows will notify you that " "an event has occured." msgstr "" "這個選項讓您關閉目前桌面上的聊天視窗中的事件通知。如果開啟此選項,則只有在不" "同桌面上的聊天視窗會通知您有事件發生。反之,則所有的聊天視窗都會送出通知。" #: kopete/config/behavior/behaviorconfig_events.ui:279 #, no-c-format msgid "E&nable events while away" msgstr "即使離開時仍啟用事件通知(&N)" #: kopete/config/behavior/behaviorconfig_events.ui:282 #, no-c-format msgid "Enable events if your account status is \"Away\"" msgstr "帳號狀態是「離開」時開啟事件通知" #: kopete/config/behavior/behaviorconfig_events.ui:285 #, no-c-format msgid "" "Enable notification events even if your account status is \"Away\" or less " "available, e.g. \"Not Available\" or \"Do not Disturb\". Note: This does not " "affect the flashing of the system tray icon." msgstr "" "即使您的帳號狀態是「離開」,或是「不在線上」,或是「勿打擾」時,仍開啟事件通" "知。注意:這個設定不會影響系統匣圖示閃爍的功能。" #: kopete/config/behavior/behaviorconfig_events.ui:293 #, no-c-format msgid "Enable events for acti&ve chat windows" msgstr "正在聊天中的視窗開啟事件通知" #: kopete/config/behavior/behaviorconfig_events.ui:296 #, no-c-format msgid "Enable events for incoming messages if the chat window is active" msgstr "對正在聊天中的視窗開啟事件通知" #: kopete/config/behavior/behaviorconfig_events.ui:299 #, no-c-format msgid "" "Enable notification events for incoming messages even if the receiving chat " "window is active. Note: Neither the system tray icon flashes nor the bubble " "is shown." msgstr "" "即使此視窗正在聊天中,仍開啟事件通知。注意:此時不會顯示泡泡訊息,或是閃爍系" "統匣圖示。" #: kopete/config/behavior/behaviorconfig_events.ui:307 #, no-c-format msgid "Switch &to desktop containing chat on opening message" msgstr "開啟訊息時切換到該桌面(&T)" #: kopete/config/behavior/behaviorconfig_events.ui:310 #, no-c-format msgid "" "Switch to the desktop which contains the chat window for the sender when " "opening his/her message" msgstr "開啟訊息時,自動切換到該聊天室所在的桌面" #: kopete/config/behavior/behaviorconfig_events.ui:313 #, no-c-format msgid "" "If there is already a chat window open for the sender of the message, " "opening his/her message will cause a switch to the desktop which contains " "this chat window." msgstr "" "如果在一個已開啟的聊天室視窗中,有人發送訊息,則開啟該訊息時,會自動切換到該" "聊天室視窗所在的桌面。" #: kopete/config/behavior/behaviorconfig_events.ui:321 #, no-c-format msgid "&Raise window on incoming message" msgstr "新訊息到來時提升視窗(&R)" #: kopete/config/behavior/behaviorconfig_events.ui:324 #, no-c-format msgid "Raise the chat window/tab on an incoming message" msgstr "新訊息到來時,提升該聊天室的視窗或頁面" #: kopete/config/behavior/behaviorconfig_events.ui:327 #, no-c-format msgid "" "If there is already a chat window opened for the sender of an incoming " "message this window will be put on the current desktop and in front of all " "other windows." msgstr "" "如果在一個已開啟的聊天室視窗中有新來的訊息,則此視窗會被提升到目前桌面的最上" "層。" #: kopete/config/behavior/behaviorconfig_general.ui:27 #, no-c-format msgid "System Tray" msgstr "系統匣" #: kopete/config/behavior/behaviorconfig_general.ui:38 #, no-c-format msgid "Show system tray &icon" msgstr "顯示系統匣圖示(&I)" #: kopete/config/behavior/behaviorconfig_general.ui:41 #, no-c-format msgid "Show the icon in the system tray" msgstr "在系統匣中顯示圖示" #: kopete/config/behavior/behaviorconfig_general.ui:44 #, no-c-format msgid "" "By default, the system tray icon indicates new incoming messages by flashing " "and showing a bubble. A left or middle mouse click on the icon will open the " "message in a new chat window. Pressing the \"View\" button in the bubble has " "the same effect." msgstr "" "系統匣圖示在有新訊息進來時,預設會閃爍並顯示泡泡訊息。對圖示按下滑鼠左鍵或中" "鍵就能開啟新的聊天視窗。在泡泡訊息中按下「檢視」也有相同效果。" #: kopete/config/behavior/behaviorconfig_general.ui:55 #, no-c-format msgid "Start with hidden &main window" msgstr "啟動時隱藏主視窗(&M)" #: kopete/config/behavior/behaviorconfig_general.ui:58 #, no-c-format msgid "Start with the main window minimized to the system tray" msgstr "啟動時將主視窗最小化到系統匣中。" #: kopete/config/behavior/behaviorconfig_general.ui:61 #, no-c-format msgid "" "Start with the main window hidden. The only visible item is the system tray " "icon." msgstr "啟動時主視窗隱藏,只看得到系統匣圖示。" #: kopete/config/behavior/behaviorconfig_general.ui:71 #, no-c-format msgid "Message Handling" msgstr "訊息處理" #: kopete/config/behavior/behaviorconfig_general.ui:82 #, no-c-format msgid "Open messages instantl&y" msgstr "立即開啟訊息(&Y)" #: kopete/config/behavior/behaviorconfig_general.ui:85 #, no-c-format msgid "Instantly open incoming messages" msgstr "立即開啟送來的訊息" #: kopete/config/behavior/behaviorconfig_general.ui:88 #, no-c-format msgid "" "If there is no existing chat window a new window will be opened when a new " "message comes in. If there is already a chat window opened for the sender of " "the message it will be displayed there instantly." msgstr "" "如果目前沒有開啟任何聊天視窗,則新訊息到來時會開啟一個新的視窗。如果已經與某" "人聊天中,則對方送來的訊息會立刻顯示在聊天視窗中。" #: kopete/config/behavior/behaviorconfig_general.ui:96 #, no-c-format msgid "Use message &queue" msgstr "使用訊息佇列(&Q)" #: kopete/config/behavior/behaviorconfig_general.ui:99 #, no-c-format msgid "Use a message queue to store incoming messages" msgstr "有新訊息來時,使用訊息佇列,而不是開啟一個新的聊天視窗。" #: kopete/config/behavior/behaviorconfig_general.ui:102 #, no-c-format msgid "" "Store new incoming messages in a message queue. New messages are messages " "that cannot be displayed in an already open chat window. Only queued or " "stacked messages trigger notification via bubble, a flashing tray icon, or " "both.." msgstr "" "新訊息來時使用訊息佇列。新訊息不會顯示在已經開啟的聊天視窗中。只有佇列或堆疊" "中的訊息會啟動泡泡通知及閃爍系統匣圖示。" #: kopete/config/behavior/behaviorconfig_general.ui:110 #, no-c-format msgid "Use message stac&k" msgstr "使用訊息堆疊(&K)" #: kopete/config/behavior/behaviorconfig_general.ui:113 #, no-c-format msgid "Use a message stack to store incoming messages" msgstr "有新訊息來時,使用訊息堆疊,而不是開啟一個新的聊天視窗。" #: kopete/config/behavior/behaviorconfig_general.ui:116 #, no-c-format msgid "" "Store new incoming messages in a message stack. New messages are messages " "that cannot be displayed in an already open chat window. Only queued or " "stacked messages trigger notification via bubble and flashing tray." msgstr "" "新訊息來時使用訊息堆疊。新訊息不會顯示在已經開啟的聊天視窗中。只有佇列或堆疊" "中的訊息會啟動泡泡通知及閃爍系統匣圖示。" #: kopete/config/behavior/behaviorconfig_general.ui:127 #, no-c-format msgid "Queue/stack &unread messages" msgstr "將未讀訊息送進佇列或堆疊(&U)" #: kopete/config/behavior/behaviorconfig_general.ui:130 #, no-c-format msgid "Also add unread messages to queue/stack" msgstr "將未讀訊息加入佇列或堆疊中" #: kopete/config/behavior/behaviorconfig_general.ui:133 #, no-c-format msgid "" "Unread messages are messages that will be displayed in an already opened but " "inactive chat window. Only incoming queued messages trigger notification via " "the bubble, the flashing tray icon, or both. With this option disabled only " "new incoming messages are queued, i.e. messages that cannot be displayed in " "an already open chat window." msgstr "" "未讀訊息是指顯示在已開啟但未取得焦點的聊天視窗中的訊息。只有佇列或堆疊中的訊" "息會啟動泡泡通知訊息並閃爍系統匣圖示。關閉這個選項的話,只有新的訊息,也就是" "尚未顯示在已開啟聊天視窗的訊息會放進佇列。" #: kopete/config/behavior/behaviorconfig_general.ui:154 #, no-c-format msgid "Connect automatically at &startup" msgstr "啟動時自動連線(&S)" #: kopete/config/behavior/behaviorconfig_general.ui:157 #, no-c-format msgid "Connect all your accounts automatically when starting Kopete" msgstr "啟動 Kopete 時自動連線所有帳號" #: kopete/config/behavior/behaviorconfig_general.ui:160 #, no-c-format msgid "" "When starting Kopete all your accounts will be connected automatically. " "Note: You can exclude accounts individually in their properties." msgstr "" "啟動 Kopete 時,您所有的帳號都會自動連線。注意:您可以在個別帳號設定中排除自" "動連線。" #: kopete/config/behavior/kopeteawayconfigbase.ui:16 #, no-c-format msgid "Away Configuration" msgstr "離開設定" #: kopete/config/behavior/kopeteawayconfigbase.ui:44 #, no-c-format msgid "Number of away messages to remember:" msgstr "記住的離開訊息數量:" #: kopete/config/behavior/kopeteawayconfigbase.ui:47 #: kopete/config/behavior/kopeteawayconfigbase.ui:50 #: kopete/config/behavior/kopeteawayconfigbase.ui:64 #: kopete/config/behavior/kopeteawayconfigbase.ui:67 #, no-c-format msgid "" "Kopete will remember this many away messages for use at a later date; if " "this limit is exceeded, the least-used message will be removed." msgstr "" "Kopete 會盡量記得最近用過的離開訊息;當數量超過的時候,最不常用的會被移除。" #: kopete/config/behavior/kopeteawayconfigbase.ui:94 #, no-c-format msgid "Auto Away" msgstr "自動離開" #: kopete/config/behavior/kopeteawayconfigbase.ui:97 #, fuzzy, no-c-format msgid "" "

If you check the Use auto away checkbox, Kopete will automaticaly " "set you globally away when the TDE screen saver starts, or after the " "selected minutes of user inactivity (i.e no mouse move, or key pressed)

\n" "

Kopete will set you available again when you come back if you checked " "Become available when detecting activity again

" msgstr "" "

如果您勾選自動離開選項,當 TDE 螢幕保護程式啟動時,或是使用者閒置" "(沒有移動滑鼠,或按鍵等動作)特定時間以後,Kopete 會自動將您設定為離開。\n" "

若您勾選偵測到動作時就設為線上的話,則當您回來時 Kopete 會自動將您" "設回上線狀態。

" #: kopete/config/behavior/kopeteawayconfigbase.ui:109 #, no-c-format msgid "&Use auto away" msgstr "使用自動離開(&U)" #: kopete/config/behavior/kopeteawayconfigbase.ui:128 #, no-c-format msgid "Become away after" msgstr "在" #: kopete/config/behavior/kopeteawayconfigbase.ui:153 #, no-c-format msgid "minutes of user inactivity" msgstr "分鐘沒動作後就設為離開" #: kopete/config/behavior/kopeteawayconfigbase.ui:183 #, no-c-format msgid "Become available when detecting activity again" msgstr "偵測到動作時就設為線上" #: kopete/config/behavior/kopeteawayconfigbase.ui:196 #, no-c-format msgid "Auto Away Message" msgstr "自動離開訊息" #: kopete/config/behavior/kopeteawayconfigbase.ui:210 #, no-c-format msgid "Display the last away message used" msgstr "顯示上次使用的離開訊息" #: kopete/config/behavior/kopeteawayconfigbase.ui:224 #, no-c-format msgid "Display the following away message:" msgstr "顯示以下的離開訊息:" #: kopete/config/identity/kopeteidentityconfigbase.ui:25 #, no-c-format msgid "Enable &global identity" msgstr "啟用通用身分(&G)" #: kopete/config/identity/kopeteidentityconfigbase.ui:41 #, no-c-format msgid "Identity:" msgstr "身分:" #: kopete/config/identity/kopeteidentityconfigbase.ui:75 #, no-c-format msgid "Ne&w Identity..." msgstr "新的身份(&W)..." #: kopete/config/identity/kopeteidentityconfigbase.ui:83 #, no-c-format msgid "Cop&y Identity..." msgstr "複製身份(&Y)..." #: kopete/config/identity/kopeteidentityconfigbase.ui:91 #, no-c-format msgid "Rename I&dentity..." msgstr "重新命名身份(&D)..." #: kopete/config/identity/kopeteidentityconfigbase.ui:99 #, no-c-format msgid "Remo&ve Identity" msgstr "移除身分(&V)" #: kopete/config/identity/kopeteidentityconfigbase.ui:113 #, no-c-format msgid "&Nickname" msgstr "暱稱(&N)" #: kopete/config/identity/kopeteidentityconfigbase.ui:152 #, no-c-format msgid "Cu&stom:" msgstr "自訂(&S):" #: kopete/config/identity/kopeteidentityconfigbase.ui:165 #, no-c-format msgid "Use address boo&k name (need address book link)" msgstr "使用通訊錄的名稱(需要通訊錄的連結)(&K)" #: kopete/config/identity/kopeteidentityconfigbase.ui:173 #, no-c-format msgid "Use nickname from con&tact for global nickname:" msgstr "使用聯絡人的暱稱作為通用暱稱(&T):" #: kopete/config/identity/kopeteidentityconfigbase.ui:189 #: kopete/contactlist/kopetemetalvipropswidget.ui:183 #: kopete/contactlist/kopetemetalvipropswidget.ui:324 #, no-c-format msgid "Contact to synchronize the displayname with." msgstr "要將顯示名稱同步的聯絡人。" #: kopete/config/identity/kopeteidentityconfigbase.ui:220 #, no-c-format msgid "P&hoto" msgstr "相片(&H)" #: kopete/config/identity/kopeteidentityconfigbase.ui:275 #, no-c-format msgid "S&ync address book photo with global photo" msgstr "通訊錄相片同步為通用相片" #: kopete/config/identity/kopeteidentityconfigbase.ui:296 #: kopete/contactlist/kopetemetalvipropswidget.ui:201 #, no-c-format msgid "Cus&tom:" msgstr "自訂(&T):" #: kopete/config/identity/kopeteidentityconfigbase.ui:304 #, no-c-format msgid "U&se photo from contact for global photo:" msgstr "使用聯絡人的相片作為通用相片(&S):" #: kopete/config/identity/kopeteidentityconfigbase.ui:312 #, no-c-format msgid "Use a&ddress book photo (needs address book link)" msgstr "使用通訊錄的相片(需要通訊錄的連結)(&D)" #: kopete/config/identity/kopeteidentityconfigbase.ui:365 #, no-c-format msgid "
Photo
" msgstr "
相片
" #: kopete/config/identity/kopeteidentityconfigbase.ui:419 #, no-c-format msgid "Address &Book Link" msgstr "通訊錄連結(&B)" #: kopete/config/identity/kopeteidentityconfigbase.ui:449 #: libkopete/ui/addressbooklinkwidget_base.ui:63 #, no-c-format msgid "C&hange..." msgstr "變更(&H)..." #: kopete/config/identity/kopeteidentityconfigbase.ui:459 #, no-c-format msgid "" "Note: The address book link uses KAddressBook's \n" "current user contact." msgstr "注意:通訊錄連結會使用 KAddressBook 的目前使用者聯絡人。" #: kopete/config/identity/kopeteidentityconfigpreferences.kcfg:11 #, fuzzy, no-c-format msgid "Latest selected global identity." msgstr "啟用通用身分(&G)" #: kopete/contactlist/customnotifications.ui:32 #, no-c-format msgid "On &event:" msgstr "當發生事件(&E):" #: kopete/contactlist/customnotifications.ui:43 #, no-c-format msgid "Choose the event that should have a custom notification" msgstr "選擇要自訂通知的事件" #: kopete/contactlist/customnotifications.ui:64 #, no-c-format msgid "Select the sound to play" msgstr "選擇要播放的音效" #: kopete/contactlist/customnotifications.ui:72 #, no-c-format msgid "&Play a sound:" msgstr "播放音效(&P):" #: kopete/contactlist/customnotifications.ui:75 #, no-c-format msgid "Play a sound when this event occurs for this contact" msgstr "聯絡人發生此事件時播放音效" #: kopete/contactlist/customnotifications.ui:100 #, no-c-format msgid "Start a cha&t" msgstr "開始聊天(&T)" #: kopete/contactlist/customnotifications.ui:103 #, no-c-format msgid "" "Open a chat window with this contact when this event occurs for this contact" msgstr "聯絡人發生此事件時開啟聊天視窗" #: kopete/contactlist/customnotifications.ui:111 #, no-c-format msgid "&Display a message:" msgstr "顯示訊息(&D)" #: kopete/contactlist/customnotifications.ui:114 #, no-c-format msgid "" "Display a message on your screen when this event occurs for this contact" msgstr "聯絡人發生此事件時在畫面上顯示訊息" #: kopete/contactlist/customnotifications.ui:125 #, no-c-format msgid "Enter the message to display" msgstr "輸入要顯示的訊息" #: kopete/contactlist/customnotifications.ui:136 #, no-c-format msgid "D&isplay once" msgstr "只顯示一次(&I)" #: kopete/contactlist/customnotifications.ui:139 #, no-c-format msgid "Only display a message the next time the event occurs" msgstr "只在下次發生此事件時顯示訊息" #: kopete/contactlist/customnotifications.ui:150 #, no-c-format msgid "P&lay once" msgstr "只播放一次(&L)" #: kopete/contactlist/customnotifications.ui:153 #, no-c-format msgid "Only play a sound the next time the event occurs" msgstr "只在下次發生此事件時播放音效" #: kopete/contactlist/customnotifications.ui:164 #, no-c-format msgid "T&rigger once" msgstr "只觸發一次(&R)" #: kopete/contactlist/customnotifications.ui:167 #, no-c-format msgid "Only start a chat the next time the event occurs" msgstr "只在下次發生此事件時開啟聊天視窗" #: kopete/contactlist/customnotifications.ui:177 #, no-c-format msgid "S&uppress standard notifications" msgstr "關掉標準通知(&U)" #: kopete/contactlist/customnotifications.ui:183 #, no-c-format msgid "" "Check to prevent notifications common to all contacts from happening for " "this contact" msgstr "勾選此選項以避免從此聯絡人所發出的通知發給所有聯絡人" #: kopete/contactlist/kopeteaddrbookexportui.ui:16 #, no-c-format msgid "Merge with Address Book" msgstr "與通訊錄合併" #: kopete/contactlist/kopeteaddrbookexportui.ui:27 #: protocols/groupwise/ui/gwcontactpropswidget.ui:106 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:35 #, no-c-format msgid "First name:" msgstr "名:" #: kopete/contactlist/kopeteaddrbookexportui.ui:38 #, no-c-format msgid "Home phone:" msgstr "住家電話:" #: kopete/contactlist/kopeteaddrbookexportui.ui:73 #, no-c-format msgid "Work phone:" msgstr "工作電話:" #: kopete/contactlist/kopeteaddrbookexportui.ui:84 #, no-c-format msgid "Mobile phone:" msgstr "行動電話:" #: kopete/contactlist/kopeteaddrbookexportui.ui:95 #, no-c-format msgid "URL:" msgstr "網址:" #: kopete/contactlist/kopeteaddrbookexportui.ui:121 #: protocols/groupwise/ui/gwcontactpropswidget.ui:139 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:57 #, no-c-format msgid "Last name:" msgstr "姓:" #: kopete/contactlist/kopeteaddrbookexportui.ui:140 #: protocols/jabber/ui/dlgvcard.ui:566 protocols/jabber/ui/dlgvcard.ui:697 #, no-c-format msgid "Email:" msgstr "電子郵件地址:" #: kopete/contactlist/kopetegvipropswidget.ui:50 #: protocols/groupwise/ui/gwcustomstatusedit.ui:76 #, no-c-format msgid "&Name:" msgstr "名稱(&N):" #: kopete/contactlist/kopetegvipropswidget.ui:68 #: kopete/contactlist/kopetemetalvipropswidget.ui:419 #, no-c-format msgid "Icons" msgstr "圖示" #: kopete/contactlist/kopetegvipropswidget.ui:87 #, no-c-format msgid "O&pen:" msgstr "開啟(&P)" #: kopete/contactlist/kopetegvipropswidget.ui:98 #, no-c-format msgid "C&losed:" msgstr "關閉(&L)" #: kopete/contactlist/kopetegvipropswidget.ui:117 #, no-c-format msgid "Use custom &icons" msgstr "使用自訂圖示(&I)" #: kopete/contactlist/kopetemetalvipropswidget.ui:50 #, no-c-format msgid "Address Book Link" msgstr "通訊錄連結" #: kopete/contactlist/kopetemetalvipropswidget.ui:77 #, no-c-format msgid "E&xport Details..." msgstr "匯出細節(&X)..." #: kopete/contactlist/kopetemetalvipropswidget.ui:80 #, no-c-format msgid "Export contact's details to the TDE Address Book" msgstr "匯出聯絡人的細節到 TDE 通訊錄" #: kopete/contactlist/kopetemetalvipropswidget.ui:108 #, no-c-format msgid "&Import Contacts" msgstr "匯入聯絡人(&I)" #: kopete/contactlist/kopetemetalvipropswidget.ui:111 #, no-c-format msgid "Import contacts from the TDE Address Book" msgstr "從 TDE 通訊錄中匯入聯絡人" #: kopete/contactlist/kopetemetalvipropswidget.ui:123 #, no-c-format msgid "Display Name Source" msgstr "顯示名稱來源" #: kopete/contactlist/kopetemetalvipropswidget.ui:134 #, no-c-format msgid "Use addressbook &name (needs addressbook link)" msgstr "使用通訊錄中的名字(需要通訊錄的連結)(&N)" #: kopete/contactlist/kopetemetalvipropswidget.ui:150 #: kopete/contactlist/kopetemetalvipropswidget.ui:291 #, no-c-format msgid "From contact:" msgstr "來自聯絡人:" #: kopete/contactlist/kopetemetalvipropswidget.ui:235 #, no-c-format msgid "Photo Source" msgstr "相片來源" #: kopete/contactlist/kopetemetalvipropswidget.ui:275 #, no-c-format msgid "U&se addressbook photo (needs addressbook link)" msgstr "使用通訊錄中的相片(需要通訊錄中的連結)(&S)" #: kopete/contactlist/kopetemetalvipropswidget.ui:342 #, no-c-format msgid "Custom:" msgstr "自訂:" #: kopete/contactlist/kopetemetalvipropswidget.ui:398 #, no-c-format msgid "S&ync photo to addressbook" msgstr "相片同步到通訊錄(&Y)" #: kopete/contactlist/kopetemetalvipropswidget.ui:408 #: protocols/groupwise/ui/gwaddui.ui:116 #, no-c-format msgid "Ad&vanced" msgstr "進階(&V)" #: kopete/contactlist/kopetemetalvipropswidget.ui:430 #, no-c-format msgid "Awa&y:" msgstr "離開(&Y):" #: kopete/contactlist/kopetemetalvipropswidget.ui:441 #, no-c-format msgid "&Online:" msgstr "上線(&O):" #: kopete/contactlist/kopetemetalvipropswidget.ui:452 #, no-c-format msgid "Use custom status &icons" msgstr "使用自訂狀態圖示(&I)" #: kopete/contactlist/kopetemetalvipropswidget.ui:455 #, no-c-format msgid "Check to set custom icons for this contact" msgstr "打勾以自訂此聯絡人的圖示" #: kopete/contactlist/kopetemetalvipropswidget.ui:495 #, no-c-format msgid "O&ffline:" msgstr "離線(&F):" #: kopete/contactlist/kopetemetalvipropswidget.ui:506 #, no-c-format msgid "Un&known:" msgstr "未知(&K):" #: kopete/contactlist/tdeabcexport_base.ui:16 #, no-c-format msgid "Export Contacts" msgstr "匯出聯絡人" #: kopete/contactlist/tdeabcexport_base.ui:23 #, no-c-format msgid "Export Contacts to Address Book" msgstr "匯出聯絡人到通訊錄" #: kopete/contactlist/tdeabcexport_base.ui:42 #, no-c-format msgid "" "This wizard helps you export instant messaging contacts to the TDE address " "book." msgstr "這個精靈幫助您匯出即時通訊的聯絡人到 TDE 通訊錄中。" #: kopete/contactlist/tdeabcexport_base.ui:61 #, no-c-format msgid "&Select Address Book" msgstr "選擇通訊錄(&S)" #: kopete/contactlist/tdeabcexport_base.ui:92 #, no-c-format msgid "Select Contacts to Export" msgstr "選擇要匯出的聯絡人" #: kopete/contactlist/tdeabcexport_base.ui:111 #, no-c-format msgid "Selected contacts will be added to the TDE address book." msgstr "選擇的聯絡人將會被加入到 TDE 通訊錄。" #: kopete/contactlist/tdeabcexport_base.ui:117 #: plugins/history/historyviewer.ui:190 #, no-c-format msgid "Contact" msgstr "聯絡人" #: kopete/contactlist/tdeabcexport_base.ui:149 #, no-c-format msgid "Select &All" msgstr "全選(&A)" #: kopete/contactlist/tdeabcexport_base.ui:157 #, no-c-format msgid "&Deselect All" msgstr "全不選(&D)" #: kopete/grouptdeabcselectorwidget.ui:49 #, no-c-format msgid "Addressbook entry:" msgstr "通訊錄項目:" #: kopete/grouptdeabcselectorwidget.ui:65 #, no-c-format msgid "&Group" msgstr "群組(&G)" #: kopete/kopeteui.rc:61 #, no-c-format msgid "Global Identity Bar" msgstr "全域身份列" #: kopete/kopeteui.rc:70 #, no-c-format msgid "&Other Actions" msgstr "其他動作(&O)" #: kopete/kopeteui.rc:77 #, no-c-format msgid "&Groups" msgstr "群組(&G)" #: libkopete/kopete.kcfg:6 #, fuzzy, no-c-format msgid "Enable the global identity feature" msgstr "啟用通用身分(&G)" #: libkopete/kopete.kcfg:7 #, no-c-format msgid "" "When enabled, this allows you to set your data in a central place. All your " "IM accounts will use this global data.\n" msgstr "" #: libkopete/kopetecommandui.rc:6 #, no-c-format msgid "Commands" msgstr "命令" #: libkopete/ui/addressbooklinkwidget_base.ui:41 #, no-c-format msgid "The TDE Address Book entry associated with this Kopete Contact" msgstr "與此 Kopete 聯絡人相關的 TDE 通訊錄資料" #: libkopete/ui/addressbooklinkwidget_base.ui:66 #, no-c-format msgid "Select an address book entry" msgstr "選取通訊錄項目" #: libkopete/ui/addressbookselectorwidget_base.ui:24 #: libkopete/ui/metacontactselectorwidget_base.ui:24 #, no-c-format msgid "Select Contact" msgstr "選取聯絡人" #: libkopete/ui/addressbookselectorwidget_base.ui:55 #, no-c-format msgid "Create New Entr&y..." msgstr "建立新項目(&Y)..." #: libkopete/ui/addressbookselectorwidget_base.ui:58 #, no-c-format msgid "Create a new entry in your address book" msgstr "在您的通訊錄中建立新項目" #: libkopete/ui/addressbookselectorwidget_base.ui:126 #, no-c-format msgid "Select the contact you want to communicate with via Instant Messaging" msgstr "選擇您要透過即時訊息聯絡的聯絡人" #: libkopete/ui/addressbookselectorwidget_base.ui:150 #: libkopete/ui/metacontactselectorwidget_base.ui:64 #, no-c-format msgid "S&earch:" msgstr "搜尋(&E):" #: libkopete/ui/contactaddednotifywidget.ui:25 #, no-c-format msgid "The contact XXX added you in his contactlist" msgstr "聯絡人 XXX 已經將您加到他(她)的聯絡人清單" #: libkopete/ui/contactaddednotifywidget.ui:61 #, no-c-format msgid "Read More Info About This Contact" msgstr "讀取更多關於此聯絡人的資訊。" #: libkopete/ui/contactaddednotifywidget.ui:71 #, no-c-format msgid "Authorize this contact to see my status" msgstr "允許這個聯絡人看見我的狀態" #: libkopete/ui/contactaddednotifywidget.ui:82 #, no-c-format msgid "Add this contact in my contactlist" msgstr "加入這個聯絡人到我的聯絡人清單" #: libkopete/ui/contactaddednotifywidget.ui:112 #, no-c-format msgid "Display name:" msgstr "顯示名稱:" #: libkopete/ui/contactaddednotifywidget.ui:115 #: libkopete/ui/contactaddednotifywidget.ui:127 #, no-c-format msgid "" "The display name of the contact. Leave it empty to use the contact nickname" msgstr "這個聯絡人的顯示名稱。保持空白以使用聯絡人的暱稱。" #: libkopete/ui/contactaddednotifywidget.ui:118 #: libkopete/ui/contactaddednotifywidget.ui:130 #, no-c-format msgid "" "Enter the contact display name. This is how the contact will appears in the " "contactlist.\n" "Leave it empty if you want to see the contact nickname as display name." msgstr "" "輸入聯絡人的顯示名稱。它會顯示在聯絡人清單裡。\n" "如果您想用聯絡人的暱稱,請保持空白。" #: libkopete/ui/contactaddednotifywidget.ui:149 #, no-c-format msgid "In the group:" msgstr "置於群組:" #: libkopete/ui/contactaddednotifywidget.ui:152 #: libkopete/ui/contactaddednotifywidget.ui:171 #, no-c-format msgid "" "Enter the group where the contact should be added. Leave it empty to add it " "in the top level group." msgstr "輸入此聯絡人要加入的群組。若是要放在頂層,則請留白。" #: libkopete/ui/contactaddednotifywidget.ui:181 #, no-c-format msgid "Addressbook link:" msgstr "通訊錄連結:" #: libkopete/ui/fileconfirmbase.ui:33 #, no-c-format msgid "" "A user is trying to send you a file. The file will only be downloaded if you " "accept this dialog. If you do not wish to receive it, please click 'Refuse'. " "This file will never be executed by Kopete at any point during or after the " "transfer." msgstr "" "有一名使用者正打算傳送檔案給您。您同意接收後才會下載檔案。如果您不打算接收," "請點選「拒絕」。Kopete 將不會執行此檔。" #: libkopete/ui/fileconfirmbase.ui:44 #, no-c-format msgid "From:" msgstr "來自:" #: libkopete/ui/fileconfirmbase.ui:52 #, no-c-format msgid "File name:" msgstr "檔案名稱:" #: libkopete/ui/fileconfirmbase.ui:65 #, no-c-format msgid "&Browse..." msgstr "瀏覽(&B)..." #: libkopete/ui/fileconfirmbase.ui:73 #, no-c-format msgid "Size:" msgstr "檔案大小:" #: libkopete/ui/fileconfirmbase.ui:81 #: protocols/groupwise/ui/gwchatpropswidget.ui:204 #, no-c-format msgid "Description:" msgstr "描述:" #: libkopete/ui/fileconfirmbase.ui:114 #, no-c-format msgid "Save to:" msgstr "另存到:" #: libkopete/ui/kopeteawaydialogbase.ui:27 #, no-c-format msgid "Please specify an away message, or choose a predefined one." msgstr "請指定一個離開訊息,或是從選單中選取。" #: libkopete/ui/kopetepassworddialog.ui:64 #: protocols/gadu/ui/gaduregisteraccountui.ui:240 #: protocols/irc/ui/networkconfig.ui:128 #, no-c-format msgid "&Password:" msgstr "密碼(&P):" #: libkopete/ui/kopetepassworddialog.ui:82 #, no-c-format msgid "&Remember password" msgstr "記住密碼(&R)" #: libkopete/ui/kopetepasswordwidgetbase.ui:36 #, no-c-format msgid "Remember password" msgstr "記住密碼" #: libkopete/ui/kopetepasswordwidgetbase.ui:39 #, no-c-format msgid "" "Check this and enter your password below if you would like your password to " "be stored in your wallet, so Kopete does not have to ask you for it each " "time it is needed." msgstr "" "勾選此選項,並在底下輸入您的密碼,您可以將密碼儲存在錢包中,Kopete 就不必每次" "詢問您密碼。" #: libkopete/ui/kopetepasswordwidgetbase.ui:64 #, no-c-format msgid "Password:" msgstr "密碼:" #: libkopete/ui/kopetepasswordwidgetbase.ui:83 #, no-c-format msgid "Enter your password here." msgstr "在此輸入您的密碼。" #: libkopete/ui/kopetepasswordwidgetbase.ui:86 #, no-c-format msgid "" "Enter your password here. If you would rather not save your password, " "uncheck the Remember password checkbox above; you will then be prompted for " "your password whenever it is needed." msgstr "" "在此輸入您的密碼。如果您不打算儲存密碼,則將「記住密碼」小方塊取消,此後每次" "需要時系統就會詢問您密碼。" #: libkopete/ui/metacontactselectorwidget_base.ui:80 #, no-c-format msgid "Meta Contact" msgstr "整合聯絡人" #: plugins/addbookmarks/addbookmarksprefsui.ui:24 #, no-c-format msgid "Use Subfolder for Each Contact" msgstr "每個聯絡人都使用子資料夾" #: plugins/addbookmarks/addbookmarksprefsui.ui:38 #, no-c-format msgid "Always" msgstr "永遠" #: plugins/addbookmarks/addbookmarksprefsui.ui:52 #: plugins/cryptography/cryptographyprefsbase.ui:154 #, no-c-format msgid "Never" msgstr "從不" #: plugins/addbookmarks/addbookmarksprefsui.ui:66 #, no-c-format msgid "Onl&y the selected contacts" msgstr "只有選取的聯絡人(&Y)" #: plugins/addbookmarks/addbookmarksprefsui.ui:83 #, no-c-format msgid "Not the selected contacts" msgstr "所選取的之外的聯絡人" #: plugins/addbookmarks/addbookmarksprefsui.ui:98 #, no-c-format msgid "Add Bookmarks from Contacts Not In Your Contact List" msgstr "從不在您的聯絡人清單中的聯絡人新增書籤" #: plugins/alias/aliasdialog.ui:16 #, no-c-format msgid "Add New Alias" msgstr "加入新的別名" #: plugins/alias/aliasdialog.ui:27 #, no-c-format msgid "Command:" msgstr "命令:" #: plugins/alias/aliasdialog.ui:38 #, no-c-format msgid "This is the command that you want to run when you execute this alias. " msgstr "這是當您執行別名時想下的命令" #: plugins/alias/aliasdialog.ui:41 #, no-c-format msgid "" "This is the command that you want to run when you execute this alias.\n" "\n" "You can use the variables %1, %2 ... %9 in your command, and they " "will be replaced with the arguments of the alias. The variable %s " "will be replaced with all arguments. %n expands to your nickname.\n" "\n" "Do not include the '/' in the command (if you do it will be stripped off " "anyway)." msgstr "" "這是當您執行別名時想下的命令。\n" "\n" "您可以在命令中用變數 %1, %2, ... %9,它們會被取代為別名的參數。%s 則會取代為所有的參數。%n 會被取代為您的暱稱。\n" "\n" "命令中不能有斜線 /,它們會被拿掉。" #: plugins/alias/aliasdialog.ui:53 #, no-c-format msgid "Alias:" msgstr "別名:" #: plugins/alias/aliasdialog.ui:64 #, no-c-format msgid "" "This is the alias you are adding (what you will type after the command " "identifier, '/')." msgstr "這是您增加的別名(在 / 後面輸入的命令)。" #: plugins/alias/aliasdialog.ui:67 #, no-c-format msgid "" "This is the alias you are adding (what you will type after the command " "identifier, '/'). Do not include the '/' (it will be stripped off if you do " "anyway)." msgstr "" "這是您增加的別名(在 / 後面輸入的命令)。請不要有斜線 /,它們會被拿掉。" #: plugins/alias/aliasdialog.ui:92 plugins/alias/aliasdialogbase.ui:44 #, no-c-format msgid "Protocols" msgstr "即時通訊協定" #: plugins/alias/aliasdialog.ui:123 plugins/alias/aliasdialog.ui:126 #, no-c-format msgid "" "If you want this alias to only be active for certain protocols, select those " "protocols here." msgstr "如果這個別名只對某些協定使用,請選擇這些協定。" #: plugins/alias/aliasdialog.ui:137 #, no-c-format msgid "For protocols:" msgstr "使用的協定:" #: plugins/alias/aliasdialogbase.ui:22 #, no-c-format msgid "Alias" msgstr "別名" #: plugins/alias/aliasdialogbase.ui:33 protocols/irc/ui/irceditaccount.ui:921 #, no-c-format msgid "Command" msgstr "命令" #: plugins/alias/aliasdialogbase.ui:69 #, no-c-format msgid "" "This is the list of custom aliases and the commands that you have already " "added" msgstr "這是您已經加入的自訂別名清單,以及它們所對應的命令。" #: plugins/alias/aliasdialogbase.ui:77 #, no-c-format msgid "&Add New Alias..." msgstr "加入新的別名(&A)..." #: plugins/alias/aliasdialogbase.ui:85 #, no-c-format msgid "&Delete Selected" msgstr "刪除選擇的項目(&D)" #: plugins/alias/aliasdialogbase.ui:93 #, no-c-format msgid "Edit Alias..." msgstr "編輯別名..." #: plugins/autoreplace/autoreplaceprefs.ui:25 #, no-c-format msgid "Sentence Options" msgstr "句子選項" #: plugins/autoreplace/autoreplaceprefs.ui:36 #, no-c-format msgid "Add a dot at the end of each sent line" msgstr "在每一行後面加上一個點" #: plugins/autoreplace/autoreplaceprefs.ui:44 #, no-c-format msgid "Start each sent line with a capital letter" msgstr "在每一行開始的字母轉為大寫" #: plugins/autoreplace/autoreplaceprefs.ui:54 #, no-c-format msgid "Replacement Options" msgstr "取代選項" #: plugins/autoreplace/autoreplaceprefs.ui:65 #, no-c-format msgid "Auto replace on incoming messages" msgstr "自動取代接收到的訊息" #: plugins/autoreplace/autoreplaceprefs.ui:73 #, no-c-format msgid "Auto replace on outgoing messages" msgstr "自動取代送出的訊息" #: plugins/autoreplace/autoreplaceprefs.ui:86 #, no-c-format msgid "Replacements List" msgstr "取代清單" #: plugins/autoreplace/autoreplaceprefs.ui:171 #, no-c-format msgid "Te&xt:" msgstr "文字(&X):" #: plugins/autoreplace/autoreplaceprefs.ui:187 #, no-c-format msgid "Re&placement:" msgstr "取代為(&P)" #: plugins/cryptography/cryptographyprefsbase.ui:25 #, no-c-format msgid "Your private PGP key:" msgstr "您的私密 PGP 金鑰:" #: plugins/cryptography/cryptographyprefsbase.ui:33 #: plugins/cryptography/cryptographyuserkey_ui.ui:40 #, no-c-format msgid "Select..." msgstr "選擇..." #: plugins/cryptography/cryptographyprefsbase.ui:49 #, no-c-format msgid "Encrypt outgoing messages with this key" msgstr "將輸出訊息以此金鑰加密" #: plugins/cryptography/cryptographyprefsbase.ui:52 #, no-c-format msgid "" "Check this box if you want to encrypt outgoing messages with this key, " "so that you will be able to decrypt them yourself later.
\n" "Warning: This can increase the size of messages, and some protocols " "will refuse to send your messages because they are too large." msgstr "" "如果您要以此金鑰將送出的訊息加密,以便您稍候可以自己解密,請勾選此項。" "
警告:這樣會增加訊息的大小。有些協定會拒絕傳送太大的訊息。
" #: plugins/cryptography/cryptographyprefsbase.ui:78 #, no-c-format msgid "Cache Passphrase" msgstr "將密碼片語保留在快取" #: plugins/cryptography/cryptographyprefsbase.ui:89 #, no-c-format msgid "Until Kopete closes" msgstr "直到 Kopete 關閉為止" #: plugins/cryptography/cryptographyprefsbase.ui:130 #: plugins/motionautoaway/motionawayprefs.ui:231 #, no-c-format msgid "minutes" msgstr "分鐘" #: plugins/cryptography/cryptographyprefsbase.ui:146 #, no-c-format msgid "For" msgstr "持續" #: plugins/cryptography/cryptographyprefsbase.ui:164 #, no-c-format msgid "Do not ask for the passphrase" msgstr "不詢問密碼片語" #: plugins/cryptography/cryptographyuserkey_ui.ui:24 #, no-c-format msgid "PGP key:" msgstr "PGP 金鑰:" #: plugins/cryptography/cryptographyuserkey_ui.ui:73 #, no-c-format msgid "TextLabel2" msgstr "TextLabel2" #: plugins/highlight/highlightprefsbase.ui:17 #, no-c-format msgid "HighlighPrefsUI" msgstr "HighlighPrefsUI" #: plugins/highlight/highlightprefsbase.ui:36 #, no-c-format msgid "Available Filters" msgstr "可用的過濾器" #: plugins/highlight/highlightprefsbase.ui:69 #, no-c-format msgid "Rename..." msgstr "重新命名..." #: plugins/highlight/highlightprefsbase.ui:75 #, no-c-format msgid "Filters" msgstr "過濾器" #: plugins/highlight/highlightprefsbase.ui:111 #, no-c-format msgid "Criteria" msgstr "準則" #: plugins/highlight/highlightprefsbase.ui:130 #, no-c-format msgid "If the message contains:" msgstr "如果訊息包含:" #: plugins/highlight/highlightprefsbase.ui:151 #, no-c-format msgid "Regular expression" msgstr "正規運算式" #: plugins/highlight/highlightprefsbase.ui:194 #, no-c-format msgid "Case sensitive" msgstr "分辨大小寫" #: plugins/highlight/highlightprefsbase.ui:212 #, no-c-format msgid "Action" msgstr "動作" #: plugins/highlight/highlightprefsbase.ui:239 #, no-c-format msgid "Set the message importance to:" msgstr "設定訊息重要性成:" #: plugins/highlight/highlightprefsbase.ui:245 #, no-c-format msgid "Low" msgstr "低" #: plugins/highlight/highlightprefsbase.ui:250 #, no-c-format msgid "Normal" msgstr "正常" #: plugins/highlight/highlightprefsbase.ui:255 #, no-c-format msgid "Highlight" msgstr "高亮度" #: plugins/highlight/highlightprefsbase.ui:302 #, no-c-format msgid "Change the background color to:" msgstr "改變背景顏色成:" #: plugins/highlight/highlightprefsbase.ui:353 #, no-c-format msgid "Change the foreground color to:" msgstr "改變前景顏色成:" #: plugins/highlight/highlightprefsbase.ui:404 #, no-c-format msgid "Play a sound:" msgstr "播放音效:" #: plugins/highlight/highlightprefsbase.ui:427 #, no-c-format msgid "Raise window" msgstr "提升視窗" #: plugins/history/historyconfig.kcfg:11 #, fuzzy, no-c-format msgid "Show previous messages in new chats." msgstr "在新的聊天視窗中顯示歷史記錄" #: plugins/history/historyconfig.kcfg:16 #, fuzzy, no-c-format msgid "Number of messages to show." msgstr "顯示訊息數量:" #: plugins/history/historyconfig.kcfg:21 #, fuzzy, no-c-format msgid "Number of messages per page" msgstr "每頁訊息數量:" #: plugins/history/historyconfig.kcfg:26 #, fuzzy, no-c-format msgid "Color of messages" msgstr "訊息顏色:" #: plugins/history/historyconfig.kcfg:31 #, no-c-format msgid "Style to use in history-browser." msgstr "" #: plugins/history/historyprefsui.ui:17 #, no-c-format msgid "HistoryPrefsWidget" msgstr "HistoryPrefsWidget" #: plugins/history/historyprefsui.ui:28 #, no-c-format msgid "Chat History" msgstr "聊天歷史記錄" #: plugins/history/historyprefsui.ui:39 #, no-c-format msgid "Number of messages per page:" msgstr "每頁訊息數量:" #: plugins/history/historyprefsui.ui:42 #, no-c-format msgid "" "The number of messages that are shown when browsing history in the chat " "window" msgstr "在聊天視窗中保留多少訊息" #: plugins/history/historyprefsui.ui:59 #, no-c-format msgid "" "The number of message that are shown when borwsing history in the chat window" msgstr "在聊天視窗中保留多少訊息" #: plugins/history/historyprefsui.ui:67 #, no-c-format msgid "Color of messages:" msgstr "訊息顏色:" #: plugins/history/historyprefsui.ui:73 plugins/history/historyprefsui.ui:91 #, no-c-format msgid "Color of history messages in the chat window" msgstr "聊天視窗中舊訊息的顏色" #: plugins/history/historyprefsui.ui:108 plugins/history/historyprefsui.ui:122 #, no-c-format msgid "" "This is the number of messages that will be added automatically in the chat " "window when opening a new chat." msgstr "這是開啟新聊天視窗時,會自動加入的訊息數量" #: plugins/history/historyprefsui.ui:116 #, no-c-format msgid "Number of messages to show:" msgstr "顯示訊息數量:" #: plugins/history/historyprefsui.ui:130 #, no-c-format msgid "Show chat history in new chats" msgstr "在新的聊天視窗中顯示歷史記錄" #: plugins/history/historyprefsui.ui:136 #, no-c-format msgid "" "When a new chat is opened, automatically add the last few messages between " "you and that contact." msgstr "" "當開啟新的聊天視窗時,會自動將過去您們之間聊天的最後幾筆訊息加入視窗中。" #: plugins/history/historyviewer.ui:179 #, no-c-format msgid "Date" msgstr "日期" #: plugins/history/historyviewer.ui:275 #, no-c-format msgid "Contact:" msgstr "聯絡人:" #: plugins/history/historyviewer.ui:296 #, no-c-format msgid "Message Filter:" msgstr "訊息過濾器:" #: plugins/history/historyviewer.ui:302 #, no-c-format msgid "All messages" msgstr "所有訊息" #: plugins/history/historyviewer.ui:307 #, no-c-format msgid "Only incoming" msgstr "只有接收到的訊息" #: plugins/history/historyviewer.ui:312 #, no-c-format msgid "Only outgoing" msgstr "只有外送的訊息" #: plugins/latex/latexconfig.kcfg:11 #, fuzzy, no-c-format msgid "Horizontal Rendering Resolution (DPI)." msgstr "合成的解析度 (DPI):" #: plugins/latex/latexconfig.kcfg:15 #, fuzzy, no-c-format msgid "Vertical Rendering Resolution (DPI)." msgstr "合成的解析度 (DPI):" #: plugins/latex/latexprefsbase.ui:28 #, no-c-format msgid "" "

The KopeTeX plugin allows Kopete to render Latex formulas in the chat window. The sender " "must enclose the formula between two $ signs. ie: $$formula$$

\n" "

This plugin requires ImageMagick convert program installed in order to " "work.

" msgstr "" "

KopeTeX 外掛程式讓 Kopete 可以在聊天視窗中合成出 LaTeX 數學公式。傳送者必須將公式夾在兩個 $$ 之" "間,即 $$formula$$

\n" "

這個外掛程式要能動,必須安裝 ImageMagick 的 convert 程式。

" #: plugins/latex/latexprefsbase.ui:73 #, no-c-format msgid "Rendering resolution (DPI):" msgstr "合成的解析度 (DPI):" #: plugins/latex/latexprefsbase.ui:113 #, no-c-format msgid "x" msgstr "x" #: plugins/motionautoaway/motionawayconfig.kcfg:9 #, fuzzy, no-c-format msgid "Become available again when the plugin detects motion" msgstr "偵測到動作時就設為線上" #: plugins/motionautoaway/motionawayconfig.kcfg:10 #, no-c-format msgid "" "If this option is set, the plugin will put you in status available if you " "are away and it detects motion again." msgstr "" #: plugins/motionautoaway/motionawayconfig.kcfg:14 #, no-c-format msgid "Video device to use for motion detection" msgstr "" #: plugins/motionautoaway/motionawayconfig.kcfg:15 #, no-c-format msgid "" "This is the Video4Linux path of the camera or device you want to use to " "detect motion. In most systems the first video device is /dev/video0." msgstr "" #: plugins/motionautoaway/motionawayconfig.kcfg:19 #, fuzzy, no-c-format msgid "Become away after this many minutes of inactivity" msgstr "當偵測不到動作多久之後設為離開(&B):" #: plugins/motionautoaway/motionawayconfig.kcfg:20 #, no-c-format msgid "" "This setting affects how fast the plugin switches to away status. Once the " "plugin detects no motion, it will wait this amount of minutes before " "switching to away status." msgstr "" #: plugins/motionautoaway/motionawayprefs.ui:33 #, no-c-format msgid "" "

Motion Auto-Away can set you to be away automatically when it does not " "detect motion from your webcam or any video4linux device.

It will put " "you online again when it detects you moving in front of the camera.

" msgstr "" "

「動作自動離開」(Motion Auto-Away)可以在您的視訊裝置或任何 video4linux " "裝置偵測不到任何動作時,將您自動設為離開。

而當裝置又偵測到您回到攝影" "機前時,則會自動設為上線。

" #: plugins/motionautoaway/motionawayprefs.ui:55 #, no-c-format msgid "Video Settings" msgstr "視訊設定" #: plugins/motionautoaway/motionawayprefs.ui:74 #, no-c-format msgid "&Video4Linux device:" msgstr "Video4Linux 裝置(&V):" #: plugins/motionautoaway/motionawayprefs.ui:102 #, no-c-format msgid "/dev/video0" msgstr "/dev/video0" #: plugins/motionautoaway/motionawayprefs.ui:131 #, no-c-format msgid "Away Settings" msgstr "離開設定" #: plugins/motionautoaway/motionawayprefs.ui:150 #, no-c-format msgid "Become available when &detecting activity again" msgstr "偵測到動作時再變回上線狀態(&D)" #: plugins/motionautoaway/motionawayprefs.ui:188 #, no-c-format msgid "&Become away after this many minutes of inactivity:" msgstr "當偵測不到動作多久之後設為離開(&B):" #: plugins/nowlistening/nowlisteningconfig.kcfg:11 #, fuzzy, no-c-format msgid "Header of the message advertised." msgstr "發佈時使用此訊息:" #: plugins/nowlistening/nowlisteningconfig.kcfg:16 #, fuzzy, no-c-format msgid "Core of the message advertised." msgstr "發佈時使用此訊息:" #: plugins/nowlistening/nowlisteningconfig.kcfg:21 #, no-c-format msgid "Conjunction when multiple track are playing." msgstr "" #: plugins/nowlistening/nowlisteningconfig.kcfg:26 #, no-c-format msgid "" "Show explicitly the current music listened via a menu or /media command." msgstr "" #: plugins/nowlistening/nowlisteningconfig.kcfg:31 #, fuzzy, no-c-format msgid "Show the current music listened in chat window." msgstr "在聊天視窗中顯示事件(&S)" #: plugins/nowlistening/nowlisteningconfig.kcfg:36 #, fuzzy, no-c-format msgid "Show the current music listened in place of your status message." msgstr "將您正在聽的音樂顯示在您的狀態訊息中(&T)" #: plugins/nowlistening/nowlisteningconfig.kcfg:41 #, fuzzy, no-c-format msgid "Show the current music listened appended to your status message." msgstr "將您正在聽的音樂顯示在您的狀態訊息中(&T)" #: plugins/nowlistening/nowlisteningconfig.kcfg:46 #, fuzzy, no-c-format msgid "Use the specified media player." msgstr "使用指定的播放程式(&S)" #: plugins/nowlistening/nowlisteningconfig.kcfg:51 #, no-c-format msgid "Selected Media Player for source of listening advertising." msgstr "" #: plugins/nowlistening/nowlisteningprefs.ui:16 #, no-c-format msgid "Now Listening" msgstr "正在收聽" #: plugins/nowlistening/nowlisteningprefs.ui:33 #, no-c-format msgid "Share Your Musical Taste" msgstr "分享您的音樂品味" #: plugins/nowlistening/nowlisteningprefs.ui:59 #, no-c-format msgid "Messa&ge" msgstr "訊息(&G)" #: plugins/nowlistening/nowlisteningprefs.ui:78 #, no-c-format msgid "Use this message when advertising:" msgstr "發佈時使用此訊息:" #: plugins/nowlistening/nowlisteningprefs.ui:86 #, no-c-format msgid "" "%track, %artist, %album, %player will be substituted if known.\n" "Expressions in brackets depend on a substitution being made." msgstr "" "%track(曲名)、%artist(歌手)、%album(專輯)、%player\n" "(播放程式)如果可用的話就會取代。\n" "Expressions in brackets depend on a substitution being made." #: plugins/nowlistening/nowlisteningprefs.ui:106 #, no-c-format msgid "Start with:" msgstr "開頭:" #: plugins/nowlistening/nowlisteningprefs.ui:120 #, no-c-format msgid "Now Listening To: " msgstr "正在收聽:" #: plugins/nowlistening/nowlisteningprefs.ui:128 #, no-c-format msgid "For each track:" msgstr "個別曲目:" #: plugins/nowlistening/nowlisteningprefs.ui:142 #, no-c-format msgid "%track (by %artist)(on %album)" msgstr "%track (專輯 %album,%artist 演唱)" #: plugins/nowlistening/nowlisteningprefs.ui:150 #, no-c-format msgid "Conjunction (if >1 track):" msgstr "連接(如果大於一首曲目):" #: plugins/nowlistening/nowlisteningprefs.ui:164 #, no-c-format msgid ", and " msgstr ",以及" #: plugins/nowlistening/nowlisteningprefs.ui:195 #, no-c-format msgid "A&dvertising Mode" msgstr "廣告模式(&D)" #  → 有時候出不來,所以換掉... #: plugins/nowlistening/nowlisteningprefs.ui:220 #, no-c-format msgid "" "Explicit &via \"Tools->Send Media Info\",\n" "or by typing \"/media\" in the chat\n" "window edit area." msgstr "" "手動透過「工具」->「傳送媒體資訊」,或是在聊天視窗中的編輯區鍵入「/media」" "(&V)" #: plugins/nowlistening/nowlisteningprefs.ui:230 #, no-c-format msgid "&Show in chat window (automatic)" msgstr "顯示在聊天視窗中(自動)(&S)" #: plugins/nowlistening/nowlisteningprefs.ui:238 #, no-c-format msgid "" "Show &the music you are listening to \n" "in place of your status message." msgstr "將您正在聽的音樂顯示在您的狀態訊息中(&T)" #: plugins/nowlistening/nowlisteningprefs.ui:247 #, no-c-format msgid "Appe&nd to your status message" msgstr "附加在您的狀態訊息中(&N)" #: plugins/nowlistening/nowlisteningprefs.ui:276 #, no-c-format msgid "Media Pla&yer" msgstr "播放程式(&Y)" #: plugins/nowlistening/nowlisteningprefs.ui:295 #, no-c-format msgid "Use &specified media player" msgstr "使用指定的播放程式(&S)" #: plugins/smpppdcs/smpppdcs.kcfg:7 #, fuzzy, no-c-format msgid "Password to connect to the SMPPPD." msgstr "SMPPPD 位置" #: plugins/smpppdcs/smpppdcs.kcfg:10 #, no-c-format msgid "Accounts to ignore in the plugin." msgstr "" #: plugins/smpppdcs/smpppdcs.kcfg:13 #, no-c-format msgid "SMPPPD-Server to connect." msgstr "" #: plugins/smpppdcs/smpppdcs.kcfg:17 #, no-c-format msgid "SMPPPD-Server port to connect." msgstr "" #: plugins/smpppdcs/smpppdcs.kcfg:21 #, fuzzy, no-c-format msgid "Use the netstat tool to determine the connection status." msgstr "netstat - 標準偵測連線狀態的方法 (&N)" #: plugins/smpppdcs/smpppdcs.kcfg:25 #, no-c-format msgid "Use the SMPPPD to determine the connection status." msgstr "" #: plugins/smpppdcs/smpppdcsprefs.ui:17 #, no-c-format msgid "SMPPPDCS Preferences" msgstr "SMPPPDCS 喜好設定" #: plugins/smpppdcs/smpppdcsprefs.ui:32 #, no-c-format msgid "&Connection" msgstr "連線(&C)" #: plugins/smpppdcs/smpppdcsprefs.ui:57 #, no-c-format msgid "Method of Connection Status Detection" msgstr "連線狀態偵測的方法" #: plugins/smpppdcs/smpppdcsprefs.ui:74 #, no-c-format msgid "&netstat - Standard method of connection status detection" msgstr "netstat - 標準偵測連線狀態的方法 (&N)" #: plugins/smpppdcs/smpppdcsprefs.ui:80 #, no-c-format msgid "" "Uses the netstat command to find a gateway; suitable on dial-up computers" msgstr "使用 netstat 命令來找出適用於撥接命令的閘道器" #: plugins/smpppdcs/smpppdcsprefs.ui:88 #, no-c-format msgid "smpppd - Ad&vanced method of connection status detection" msgstr "smpppd - 偵測連線狀態的進階方法(&V)" #: plugins/smpppdcs/smpppdcsprefs.ui:91 #, no-c-format msgid "" "Uses the smpppd on a gateway; suitable for a computer in a private network" msgstr "在閘道器上使用 smpppd,適用於私人網路中" #: plugins/smpppdcs/smpppdcsprefs.ui:107 #, no-c-format msgid "&Try to Detect Automatically" msgstr "嚐試自動偵測(&T)" #: plugins/smpppdcs/smpppdcsprefs.ui:110 #, no-c-format msgid "Tries to find an appropriate connection method" msgstr "試著自動找出適合的連線方法" #: plugins/smpppdcs/smpppdcsprefs.ui:142 #, no-c-format msgid "Location of the SMPPPD" msgstr "SMPPPD 位置" #: plugins/smpppdcs/smpppdcsprefs.ui:187 #, no-c-format msgid "Acco&unts" msgstr "帳號(&U)" #: plugins/smpppdcs/smpppdcsprefs.ui:218 #, no-c-format msgid "Choose the accounts to ignore:" msgstr "選擇要忽略的帳號:" #: plugins/smpppdcs/smpppdlocationui.ui:16 #, no-c-format msgid "SMPPPDLocation" msgstr "SMPPPDLocation" #: plugins/smpppdcs/smpppdlocationui.ui:27 #: protocols/groupwise/ui/gwaccountpreferences.ui:146 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:365 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:149 #: protocols/yahoo/ui/yahooeditaccountbase.ui:267 #, no-c-format msgid "Ser&ver:" msgstr "伺服器(&V):" #: plugins/smpppdcs/smpppdlocationui.ui:41 #, no-c-format msgid "localhost" msgstr "localhost" #: plugins/smpppdcs/smpppdlocationui.ui:47 #, no-c-format msgid "The server on which the SMPPPD is running" msgstr "SMPPPD 執行的伺服器" #: plugins/smpppdcs/smpppdlocationui.ui:55 #: protocols/yahoo/ui/yahooeditaccountbase.ui:304 #, no-c-format msgid "P&ort:" msgstr "連接埠(&O):" #: plugins/smpppdcs/smpppdlocationui.ui:83 #, no-c-format msgid "The port on which the SMPPPD is running on" msgstr "SMPPPD 監聽的連接埠" #: plugins/smpppdcs/smpppdlocationui.ui:91 #, no-c-format msgid "Default: 3185" msgstr "預設:3185" #: plugins/smpppdcs/smpppdlocationui.ui:118 #: protocols/jabber/ui/dlgjabberregisteraccount.ui:87 #, no-c-format msgid "Pass&word:" msgstr "密碼(&W):" #: plugins/smpppdcs/smpppdlocationui.ui:135 #, no-c-format msgid "The password to authenticate with the smpppd" msgstr "要與 smpppd 認證的密碼" #: plugins/statistics/statisticswidget.ui:36 #, no-c-format msgid "Ask &Database" msgstr "詢問資料庫(&D)" #: plugins/statistics/statisticswidget.ui:47 #, no-c-format msgid "Date && Time" msgstr "日期及時間" #: plugins/statistics/statisticswidget.ui:112 #, no-c-format msgid "Time :" msgstr "時間:" #: plugins/statistics/statisticswidget.ui:167 #, no-c-format msgid "Question" msgstr "問題" #: plugins/statistics/statisticswidget.ui:184 #, no-c-format msgid "Contact Status at Date & Time" msgstr "某日期時間的聯絡人狀態" #: plugins/statistics/statisticswidget.ui:189 #, no-c-format msgid "Most Used Status at Date" msgstr "某日期最多使用的狀態" #: plugins/statistics/statisticswidget.ui:209 #, no-c-format msgid "&Ask" msgstr "詢問(&A)" #: plugins/statistics/statisticswidget.ui:221 #, no-c-format msgid "Answer" msgstr "答案" #: plugins/texteffect/texteffectprefs.ui:35 #, no-c-format msgid "&Colors" msgstr "顏色(&C)" #: plugins/texteffect/texteffectprefs.ui:62 #, no-c-format msgid "&Add..." msgstr "新增(&A)..." #: plugins/texteffect/texteffectprefs.ui:78 #, no-c-format msgid "Move &Up" msgstr "向上移動(&U)" #: plugins/texteffect/texteffectprefs.ui:86 #, no-c-format msgid "Move &Down" msgstr "向下移動(&D)" #: plugins/texteffect/texteffectprefs.ui:113 #, no-c-format msgid "Random order" msgstr "隨機順序" #: plugins/texteffect/texteffectprefs.ui:135 #, no-c-format msgid "Change global text foreground color" msgstr "變更全域文字前景顏色" #: plugins/texteffect/texteffectprefs.ui:143 #, no-c-format msgid "Change color every letter" msgstr "每個字母都變更顏色" #: plugins/texteffect/texteffectprefs.ui:151 #, no-c-format msgid "Change color every word" msgstr "每個單字都變更顏色" #: plugins/texteffect/texteffectprefs.ui:161 #, no-c-format msgid "Effects" msgstr "效果" #: plugins/texteffect/texteffectprefs.ui:180 #, no-c-format msgid "L4m3r t4lk" msgstr "L4m3r t4lk" #: plugins/texteffect/texteffectprefs.ui:196 #, no-c-format msgid "CasE wAVes" msgstr "CasE wAVes" #: plugins/translator/translatorprefsbase.ui:38 #, no-c-format msgid "Translation service:" msgstr "翻譯服務:" #: plugins/translator/translatorprefsbase.ui:46 #, no-c-format msgid "Default native language:" msgstr "預設母語:" #: plugins/translator/translatorprefsbase.ui:67 #, no-c-format msgid "Incoming Messages" msgstr "接收的訊息" #: plugins/translator/translatorprefsbase.ui:78 #: plugins/translator/translatorprefsbase.ui:130 #, no-c-format msgid "Do not translate" msgstr "不要翻譯" #: plugins/translator/translatorprefsbase.ui:92 #: plugins/translator/translatorprefsbase.ui:144 #, no-c-format msgid "Show the original message" msgstr "顯示原始訊息" #: plugins/translator/translatorprefsbase.ui:106 #: plugins/translator/translatorprefsbase.ui:158 #, no-c-format msgid "Translate directly" msgstr "直接翻譯" #: plugins/translator/translatorprefsbase.ui:119 #, no-c-format msgid "Outgoing Messages" msgstr "送出的訊息" #: plugins/translator/translatorprefsbase.ui:166 #, no-c-format msgid "Show dialog before sending" msgstr "傳送前顯示對話方塊" #: plugins/webpresence/webpresenceprefs.ui:33 #, no-c-format msgid "Uploading" msgstr "上傳" #: plugins/webpresence/webpresenceprefs.ui:56 #, no-c-format msgid "Uplo&ad to:" msgstr "上傳到(&A):" #: plugins/webpresence/webpresenceprefs.ui:91 #, no-c-format msgid "Formatting" msgstr "格式" #: plugins/webpresence/webpresenceprefs.ui:108 #, no-c-format msgid "HTML (simple loo&k)" msgstr "簡單的 HTML(&K)" #: plugins/webpresence/webpresenceprefs.ui:114 #, no-c-format msgid "" "HTML 4.01 Transitional using the ISO-8859-1 (aka. Latin 1) character set " "encoding." msgstr "HTML 4.01 Transitional,使用 ISO-8859-1(又名 Latin-1)字元集。" #: plugins/webpresence/webpresenceprefs.ui:117 #, no-c-format msgid "" "HTML 4.01 Transitional formatting using ISO-8859-1 (aka. Latin 1) character " "set encoding.\n" "\n" "This version should be easily opened by most web browsers." msgstr "" "HTML 4.01 Transitional,使用 ISO-8859-1(又名 Latin-1)字元集。\n" "\n" "這個版本應該能很容易地被大部份的瀏覽器開啟。" #: plugins/webpresence/webpresenceprefs.ui:127 #, no-c-format msgid "XHTML (simple look)" msgstr "簡單的 XTML" #: plugins/webpresence/webpresenceprefs.ui:130 #, no-c-format msgid "XHTML 1.0 Strict" msgstr "XHTML 1.0 Strict" #: plugins/webpresence/webpresenceprefs.ui:133 #, no-c-format msgid "" "The resulting page will be formatted using the XHTML 1.0 Strict W3C " "Recommendation. The character set encoding is UTF-8.\n" "\n" "Note that some web browsers do not support XHTML. You should also make sure " "your web server serves it out with the correct mime type, such as " "application/xhtml+xml." msgstr "" "結果頁會被格式化為 XHTML 1.0 Strict W3C 推薦格式。字元集為 UTF-8。\n" "\n" "注意,有些網路瀏覽器不支援 XHTML。您應該確認您的網頁伺服器能正確處理其 MIME " "型態,如 application/xhtml+xml。" #: plugins/webpresence/webpresenceprefs.ui:143 #, no-c-format msgid "&XML" msgstr "XML(&X)" #: plugins/webpresence/webpresenceprefs.ui:146 #, no-c-format msgid "Save the output in XML format using UTF-8 character set." msgstr "將輸出以 XML 格式儲存,使用 UTF-8 字元集。" #: plugins/webpresence/webpresenceprefs.ui:149 #, no-c-format msgid "Save the output in XML format using the UTF-8 encoding." msgstr "將輸出以 XML 格式儲存,使用 UTF-8 編碼。" #: plugins/webpresence/webpresenceprefs.ui:157 #, no-c-format msgid "XML transformation &using this XSLT sheet:" msgstr "使用 XSLT 轉換 XML (&U)" #: plugins/webpresence/webpresenceprefs.ui:200 #, no-c-format msgid "Repla&ce protocol text with images in (X)HTML" msgstr "將協定文字轉換為圖片,使用 XHTML(&C)" #: plugins/webpresence/webpresenceprefs.ui:203 #, fuzzy, no-c-format msgid "Replaces the protocol names, such as IRC with images." msgstr "將協定名稱,如 MSN 與 IRC,換成圖片。" #: plugins/webpresence/webpresenceprefs.ui:206 #, fuzzy, no-c-format msgid "" "Replaces the protocol names, such as IRC with images.\n" "\n" "Note that you have to manually copy the PNG files into place.\n" "\n" "The following files are used by default:\n" "\n" "images/icq_protocol.png\n" "images/jabber_protocol.png\n" "images/yahoo_protocol.png\n" "images/irc_protocol.png\n" "images/sms_protocol.png\n" "images/gadu_protocol.png\n" "images/winpopup_protocol.png" msgstr "" "將協定名稱,如 MSN 與 IRC,換成圖片。\n" "\n" "注意,您必須手動將 PNG 檔案複製到正確位置。" #: plugins/webpresence/webpresenceprefs.ui:228 #, no-c-format msgid "Display Name" msgstr "顯示名稱" #: plugins/webpresence/webpresenceprefs.ui:245 #, no-c-format msgid "Use one of &your IM names" msgstr "使用您的其中一個即時通訊名稱(&Y)" #: plugins/webpresence/webpresenceprefs.ui:256 #, no-c-format msgid "Use another &name:" msgstr "使用其他名稱(&N):" #: plugins/webpresence/webpresenceprefs.ui:299 #, no-c-format msgid "Include &IM addresses" msgstr "引入即時通訊位址(&I)" #: protocols/gadu/ui/gaduadd.ui:40 protocols/gadu/ui/gadueditaccountui.ui:72 #, no-c-format msgid "Gadu-Gadu &UIN:" msgstr "Gadu-Gadu UIN(&U):" #: protocols/gadu/ui/gaduadd.ui:55 protocols/gadu/ui/gaduadd.ui:66 #, no-c-format msgid "The user ID of the Gadu-Gadu account you would like to add." msgstr "您要新增的 Gadu-Gadu 帳號的使用者代碼。" #: protocols/gadu/ui/gaduadd.ui:58 protocols/gadu/ui/gaduadd.ui:69 #, no-c-format msgid "" "The user ID of the Gadu-Gadu account you would like to add. This should be " "in the form of a number (no decimals, no spaces). This field is mandatory." msgstr "" "您要新增的 Gadu-Gadu 帳號的使用者代碼。這應該是以數字組成(沒有空白與小數" "點)。這個欄位必須輸入。" #: protocols/gadu/ui/gaduadd.ui:79 #, no-c-format msgid "(for example: 1234567)" msgstr "(例如:1234567)" #: protocols/gadu/ui/gaduadd.ui:109 #, no-c-format msgid "&Forename:" msgstr "名(&F):" #: protocols/gadu/ui/gaduadd.ui:115 protocols/gadu/ui/gaduadd.ui:240 #, no-c-format msgid "The forename of the contact you wish to add." msgstr "您要新增的聯絡人的名字。" #: protocols/gadu/ui/gaduadd.ui:118 protocols/gadu/ui/gaduadd.ui:243 #, no-c-format msgid "" "The forename (first name) of the contact you wish to add. Optionally this " "may include a middle name." msgstr "您要新增的聯絡人的名字。這可以包含中間教名(middle name)。" #: protocols/gadu/ui/gaduadd.ui:129 #, no-c-format msgid "&Surname:" msgstr "姓(&S):" #: protocols/gadu/ui/gaduadd.ui:135 protocols/gadu/ui/gaduadd.ui:254 #, no-c-format msgid "The surname of the contact you wish to add." msgstr "您要新增的聯絡人的姓氏。" #: protocols/gadu/ui/gaduadd.ui:138 protocols/gadu/ui/gaduadd.ui:257 #, no-c-format msgid "The surname (last name) of the contact you wish to add." msgstr "您要新增的聯絡人的姓氏。" #: protocols/gadu/ui/gaduadd.ui:154 protocols/irc/ui/irceditaccount.ui:120 #, no-c-format msgid "N&ickname:" msgstr "暱稱(&N):" #: protocols/gadu/ui/gaduadd.ui:160 protocols/gadu/ui/gaduadd.ui:163 #: protocols/gadu/ui/gaduadd.ui:265 protocols/gadu/ui/gaduadd.ui:268 #, no-c-format msgid "A nickname for the contact you wish to add." msgstr "您要新增的聯絡人的暱稱。" #: protocols/gadu/ui/gaduadd.ui:182 #, no-c-format msgid "&Email address:" msgstr "電子郵件地址(&E):" #: protocols/gadu/ui/gaduadd.ui:188 protocols/gadu/ui/gaduadd.ui:191 #: protocols/gadu/ui/gaduadd.ui:216 protocols/gadu/ui/gaduadd.ui:219 #: protocols/gadu/ui/gaduadd.ui:279 protocols/gadu/ui/gaduadd.ui:282 #: protocols/gadu/ui/gaduadd.ui:293 protocols/gadu/ui/gaduadd.ui:296 #, no-c-format msgid "E-Mail address for this contact." msgstr "此聯絡人的電子郵件地址。" #: protocols/gadu/ui/gaduadd.ui:210 protocols/sms/ui/smsadd.ui:54 #: protocols/sms/ui/smsuserprefs.ui:70 #, no-c-format msgid "&Telephone number:" msgstr "電話號碼(&T):" #: protocols/gadu/ui/gaduadd.ui:311 #, no-c-format msgid "Offline to contact when you set \"&Just for friends\"" msgstr "當您設定「只顯示好友」時,對此聯絡人顯示離線(&J)" #: protocols/gadu/ui/gaduadd.ui:314 protocols/gadu/ui/gaduadd.ui:317 #, no-c-format msgid "" "Check if you want to exclude this contact from the \"Just for friends\" " "status mode." msgstr "勾選此選項,在您設定為「只顯示好友」模式時,則對此聯絡人顯示離線。" #: protocols/gadu/ui/gaduadd.ui:323 #, no-c-format msgid "Group" msgstr "群組" #: protocols/gadu/ui/gaduawayui.ui:50 #, no-c-format msgid "" "Choose status, by default present status is selected. \n" "So all you need to do is just to type in your description. \n" "Choosing Offline status will disconnect you, with given description." msgstr "" "選擇狀態。預設選擇為「上線」狀態。\n" "因此您只需要輸入您的說明即可。 選擇「離線」狀態會中斷連線,並附上說明。" #: protocols/gadu/ui/gaduawayui.ui:77 #, no-c-format msgid "Set your status to Online." msgstr "將您的狀態設定為「上線」。" #: protocols/gadu/ui/gaduawayui.ui:80 #, no-c-format msgid "" "Set your status to Online, indicating that you are available to chat with " "anyone who wishes." msgstr "將您的狀態設定為「上線」,表示您目前可以接受別人的聊天。" #: protocols/gadu/ui/gaduawayui.ui:94 #, no-c-format msgid "Set your status to busy." msgstr "將您的狀態設定為「忙碌」。" #: protocols/gadu/ui/gaduawayui.ui:97 #, no-c-format msgid "" "Set your status to busy, indicating that you may should not be bothered with " "trivial chat, and may not be able to reply immediately." msgstr "將您的狀態設定為「忙碌」,表示您可能不希望被打擾,或是無法立即回應。" #: protocols/gadu/ui/gaduawayui.ui:111 #, no-c-format msgid "" "Set status to invisible, which will hide your presence from other users." msgstr "將您的狀態設定為「隱身」,讓其他使用者看不到您。" #: protocols/gadu/ui/gaduawayui.ui:114 #, no-c-format msgid "" "Set status to invisible, which will hide your presence from other users (who " "will see you as offline). However you may still chat, and see the online " "presence of others." msgstr "" "將您的狀態設定為「隱身」,讓其他使用者看不到您。然而您還是可以開啟聊天,也可" "以看到其他上線的聯絡人。" #: protocols/gadu/ui/gaduawayui.ui:128 protocols/gadu/ui/gaduawayui.ui:131 #, no-c-format msgid "Choose this status to disconnect with description entered below." msgstr "選擇此狀態會中斷連線,並附上底下的說明。" #: protocols/gadu/ui/gaduawayui.ui:151 #, no-c-format msgid "&Message:" msgstr "訊息(&M):" #: protocols/gadu/ui/gaduawayui.ui:157 protocols/gadu/ui/gaduawayui.ui:174 #, no-c-format msgid "Description of your status." msgstr "您的狀態說明。" #: protocols/gadu/ui/gaduawayui.ui:160 protocols/gadu/ui/gaduawayui.ui:177 #, no-c-format msgid "Description of your status (up to 70 characters)." msgstr "您的狀態說明(最多 70 字元)。" #: protocols/gadu/ui/gadueditaccountui.ui:24 #, no-c-format msgid "Account Preferences - Gadu-Gadu" msgstr "Gadu Gadu 的帳號喜好設定" #: protocols/gadu/ui/gadueditaccountui.ui:42 #: protocols/groupwise/ui/gwaccountpreferences.ui:37 #: protocols/irc/ui/irceditaccount.ui:50 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:31 #: protocols/sms/ui/smsactprefs.ui:60 #, no-c-format msgid "B&asic Setup" msgstr "基本設定(&A)" #: protocols/gadu/ui/gadueditaccountui.ui:53 #: protocols/groupwise/ui/gwaccountpreferences.ui:48 #: protocols/irc/ui/irceditaccount.ui:109 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:52 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:42 #: protocols/sms/ui/smsactprefs.ui:71 #: protocols/winpopup/ui/wpeditaccountbase.ui:59 #: protocols/yahoo/ui/yahooeditaccountbase.ui:54 #, no-c-format msgid "Account Information" msgstr "帳號資訊" #: protocols/gadu/ui/gadueditaccountui.ui:78 #: protocols/gadu/ui/gadueditaccountui.ui:101 #, no-c-format msgid "The user ID of your Gadu-Gadu account." msgstr "您的 Gadu-Gadu 使用者代號。" #: protocols/gadu/ui/gadueditaccountui.ui:81 #: protocols/gadu/ui/gadueditaccountui.ui:104 #, no-c-format msgid "" "The user ID of your Gadu-Gadu account. This should be in the form of a " "number (no decimals, no spaces)." msgstr "您的 Gadu-Gadu 使用者代號。應該是一串數字(沒有空白與小數點)。" #: protocols/gadu/ui/gadueditaccountui.ui:119 #: protocols/groupwise/ui/gwaccountpreferences.ui:102 #: protocols/irc/ui/irceditaccount.ui:390 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:109 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:96 #: protocols/oscar/icq/ui/icqeditaccountui.ui:105 #: protocols/yahoo/ui/yahooeditaccountbase.ui:103 #, no-c-format msgid "E&xclude from connect all" msgstr "從全部連線中排除(&X)" #: protocols/gadu/ui/gadueditaccountui.ui:125 #, no-c-format msgid "" "Check to disable automatic connection. If checked, you may connect to this " "account manually using the icon in the bottom of the main Kopete window." msgstr "" "勾選此選項以關閉自動連線。您還是可以利用 Kopete 主視窗底下的圖示按鈕來手動連" "線。" #: protocols/gadu/ui/gadueditaccountui.ui:143 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:138 #: protocols/oscar/icq/ui/icqeditaccountui.ui:134 #: protocols/yahoo/ui/yahooeditaccountbase.ui:132 #, no-c-format msgid "Registration" msgstr "註冊" #: protocols/gadu/ui/gadueditaccountui.ui:168 #, no-c-format msgid "" "To connect to the Gadu-Gadu network, you will need a Gadu-Gadu account." "

\n" "If you do not currently have an account, please click the button to create " "one." msgstr "" "要連線到 Gadu-Gadu 網路,您需要一個 Gadu-Gadu 帳號。

\n" "如果您目前沒有帳號,請按此按鈕來建立。" #: protocols/gadu/ui/gadueditaccountui.ui:183 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:174 #: protocols/oscar/icq/ui/icqeditaccountui.ui:171 #, no-c-format msgid "Re&gister New Account" msgstr "註冊新帳號(&G)" #: protocols/gadu/ui/gadueditaccountui.ui:186 #: protocols/gadu/ui/gadueditaccountui.ui:189 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:177 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:180 #: protocols/yahoo/ui/yahooeditaccountbase.ui:174 #: protocols/yahoo/ui/yahooeditaccountbase.ui:177 #, no-c-format msgid "Register a new account on this network." msgstr "在此網路上註冊新帳號。" #: protocols/gadu/ui/gadueditaccountui.ui:218 #: protocols/sms/ui/smsactprefs.ui:220 #, no-c-format msgid "A&ccount Preferences" msgstr "帳號喜好設定(&C)" #: protocols/gadu/ui/gadueditaccountui.ui:246 #: protocols/irc/ui/irceditaccount.ui:371 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:271 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:122 #: protocols/oscar/icq/ui/icqeditaccountui.ui:211 #: protocols/yahoo/ui/yahooeditaccountbase.ui:234 #, no-c-format msgid "Connection Preferences" msgstr "連線喜好設定" #: protocols/gadu/ui/gadueditaccountui.ui:260 #, no-c-format msgid "&Use direct connections (DCC)" msgstr "使用直接連線(DCC)(&U)" #: protocols/gadu/ui/gadueditaccountui.ui:279 #, no-c-format msgid "Use protocol encr&yption (SSL):" msgstr "使用協定加密(SSL)(&Y):" #: protocols/gadu/ui/gadueditaccountui.ui:285 #: protocols/gadu/ui/gadueditaccountui.ui:317 #, no-c-format msgid "" "Whether or not you want to enable SSL encrypted communication with the " "server." msgstr "您是否要開啟 SSL 加密通訊。" #: protocols/gadu/ui/gadueditaccountui.ui:288 #: protocols/gadu/ui/gadueditaccountui.ui:320 #, no-c-format msgid "" "Whether or not you want to enable SSL encrypted communication with the " "server. Note that this is not end-to-end encryption, but rather encrypted " "communication with the server." msgstr "" "您是否要開啟 SSL 加密通訊。注意這不是點對點的加密,而是與伺服器的通訊加密。" #: protocols/gadu/ui/gadueditaccountui.ui:294 #, no-c-format msgid "If Available" msgstr "可以的話" #: protocols/gadu/ui/gadueditaccountui.ui:299 #, no-c-format msgid "Required" msgstr "請求" #: protocols/gadu/ui/gadueditaccountui.ui:333 #, no-c-format msgid "C&ache server information" msgstr "快取伺服器資訊(&A)" #: protocols/gadu/ui/gadueditaccountui.ui:339 #, no-c-format msgid "" "Cache connection information for each server connected to in case the main " "load-balancing server fails." msgstr "對每個已連接的伺服器保留快取資訊,以防主要的負載平衡的伺服器失效。" #: protocols/gadu/ui/gadueditaccountui.ui:342 #, no-c-format msgid "" "This option is used whenever the primary Gadu-Gadu load-balancing server " "fails. If this is checked, Kopete will try to connect to the actual servers " "directly using cached information about them. This prevents connection " "errors when the main load-balancing server does not answer. In practice it " "only helps very rarely." msgstr "" "這個選項是在 Gadu-Gadu 負載平衡伺服器失效時使用。如果勾選此選項,Kopete 會利" "用保留的快取伺服器資訊,直接連到實際使用的伺服器。這只在負載平衡伺服器失效時" "比較有用,其他時間很少用到。" #: protocols/gadu/ui/gadueditaccountui.ui:353 #, no-c-format msgid "Ignore people off your contact list" msgstr "忽略不在您的聯絡人清單中的人" #: protocols/gadu/ui/gadueditaccountui.ui:371 #, no-c-format msgid "U&ser Information" msgstr "使用者資訊(&S)" #: protocols/gadu/ui/gadueditaccountui.ui:397 #, no-c-format msgid "" "

You must be connected to change your Personal " "Information.

" msgstr "

您必須連線以改變您的個人資訊。

" #: protocols/gadu/ui/gadueditaccountui.ui:408 #, no-c-format msgid "User Information" msgstr "使用者資訊" #: protocols/gadu/ui/gadueditaccountui.ui:443 #: protocols/gadu/ui/gadusearch.ui:96 #, no-c-format msgid "Surname:" msgstr "姓氏:" #: protocols/gadu/ui/gadueditaccountui.ui:451 #, no-c-format msgid "Your nick name:" msgstr "暱稱:" #: protocols/gadu/ui/gadueditaccountui.ui:459 #: protocols/gadu/ui/gadusearch.ui:245 #, no-c-format msgid "Gender:" msgstr "性別:" #: protocols/gadu/ui/gadueditaccountui.ui:467 #, no-c-format msgid "Year of birth:" msgstr "出生年份:" #: protocols/gadu/ui/gadueditaccountui.ui:475 #: protocols/gadu/ui/gadusearch.ui:112 protocols/jabber/ui/dlgvcard.ui:462 #: protocols/jabber/ui/dlgvcard.ui:666 #: protocols/oscar/icq/ui/icqgeneralinfo.ui:551 #: protocols/oscar/icq/ui/icqworkinfowidget.ui:152 #: protocols/yahoo/ui/yahooworkinfowidget.ui:182 #, no-c-format msgid "City:" msgstr "城市:" #: protocols/gadu/ui/gadueditaccountui.ui:560 #, no-c-format msgid "" "Values below are going to be used in search, but will not appear in results." msgstr "底下的值是用於搜尋,但不會出現在結果中。" #: protocols/gadu/ui/gadueditaccountui.ui:601 #, no-c-format msgid "Maiden name:" msgstr "娘家姓氏:" #: protocols/gadu/ui/gadueditaccountui.ui:609 #, no-c-format msgid "City of origin:" msgstr "出生城市:" #: protocols/gadu/ui/gadueditaccountui.ui:651 #, no-c-format msgid "&File Transfer" msgstr "檔案傳輸(&F)" #: protocols/gadu/ui/gadueditaccountui.ui:665 #, no-c-format msgid "Global DCC Options" msgstr "全域 DCC 選項" #: protocols/gadu/ui/gadueditaccountui.ui:676 #, no-c-format msgid "" "

These options affect all Gadu-Gadu accounts.

" msgstr "" "

這些選項會影響所有的 " "Gadu-Gadu 帳號。

" #: protocols/gadu/ui/gadueditaccountui.ui:684 #, no-c-format msgid "&Override default configuration" msgstr "覆蓋預設設定(&O)" #: protocols/gadu/ui/gadueditaccountui.ui:714 #, no-c-format msgid "Local &IP address /" msgstr "本地 IP 位址(&I) /" #: protocols/gadu/ui/gadueditaccountui.ui:728 #, no-c-format msgid "po&rt:" msgstr "連接埠(&R):" #: protocols/gadu/ui/gadueditaccountui.ui:752 #, no-c-format msgid "0.0.0.0" msgstr "0.0.0.0" #: protocols/gadu/ui/gaduregisteraccountui.ui:16 #, no-c-format msgid "Register Account - Gadu-Gadu" msgstr "註冊帳號 - Gadu-Gadu" #: protocols/gadu/ui/gaduregisteraccountui.ui:66 #, no-c-format msgid "Repeat pass&word:" msgstr "重複輸入密碼(&W):" #: protocols/gadu/ui/gaduregisteraccountui.ui:72 #: protocols/gadu/ui/gaduregisteraccountui.ui:260 #, no-c-format msgid "A confirmation of the password you would like to use." msgstr "確認您要使用的密碼。" #: protocols/gadu/ui/gaduregisteraccountui.ui:75 #: protocols/gadu/ui/gaduregisteraccountui.ui:263 #, no-c-format msgid "A confirmation of the password you would like to use for this account." msgstr "確認您要使用的密碼。" #: protocols/gadu/ui/gaduregisteraccountui.ui:86 #: protocols/gadu/ui/gaduregisteraccountui.ui:246 #, no-c-format msgid "The password you would like to use." msgstr "您要使用的密碼。" #: protocols/gadu/ui/gaduregisteraccountui.ui:89 #: protocols/gadu/ui/gaduregisteraccountui.ui:249 #, no-c-format msgid "The password you would like to use for this account." msgstr "您要使用的密碼。" #: protocols/gadu/ui/gaduregisteraccountui.ui:97 #: protocols/gadu/ui/gaduregisteraccountui.ui:142 #, no-c-format msgid "Your E-mail address." msgstr "您的電子郵件地址。" #: protocols/gadu/ui/gaduregisteraccountui.ui:100 #: protocols/gadu/ui/gaduregisteraccountui.ui:145 #, no-c-format msgid "The E-mail address you would like to use to register this account." msgstr "您要註冊此帳號使用的電子郵件地址。" #: protocols/gadu/ui/gaduregisteraccountui.ui:136 #, no-c-format msgid "&E-Mail address:" msgstr "電子郵件地址(&E):" #: protocols/gadu/ui/gaduregisteraccountui.ui:184 #, no-c-format msgid "&Verification sequence:" msgstr "檢查序列(&V):" #: protocols/gadu/ui/gaduregisteraccountui.ui:190 #: protocols/gadu/ui/gaduregisteraccountui.ui:201 #, no-c-format msgid "The text from the image below." msgstr "底下圖片顯示的文字。" #: protocols/gadu/ui/gaduregisteraccountui.ui:193 #: protocols/gadu/ui/gaduregisteraccountui.ui:204 #, no-c-format msgid "" "The text from the image below. This is used to prevent abusive automated " "registration scripts." msgstr "底下圖片顯示的文字。這是為了預防被自動註冊文稿攻擊。" #: protocols/gadu/ui/gaduregisteraccountui.ui:337 #, no-c-format msgid "Gadu-Gadu registration token." msgstr "Gadu-Gadu 註冊記號。" #: protocols/gadu/ui/gaduregisteraccountui.ui:340 #, no-c-format msgid "" "This field contains an image with number that you need to type into the " "Verification Sequence field above." msgstr "這個欄位包含您要輸入到上方檢查序列欄位的數字的圖片。" #: protocols/gadu/ui/gaduregisteraccountui.ui:375 #, no-c-format msgid "" "Type the letters and numbers shown in the image above into the " "Verification Sequence field. This is used to prevent automated " "registration abuse." msgstr "" "將上方影像中顯示的字母與數字輸入到檢查序列欄位中。這是為了避免被攻" "擊。" #: protocols/gadu/ui/gadusearch.ui:104 protocols/jabber/ui/dlgchatjoin.ui:24 #, no-c-format msgid "Nick:" msgstr "暱稱:" #: protocols/gadu/ui/gadusearch.ui:162 #, no-c-format msgid "Age from:" msgstr "年紀從:" #: protocols/gadu/ui/gadusearch.ui:190 #, no-c-format msgid "to:" msgstr "到:" #: protocols/gadu/ui/gadusearch.ui:304 #, no-c-format msgid "User number:" msgstr "使用者編號:" #: protocols/gadu/ui/gadusearch.ui:327 #, no-c-format msgid "Request information about user:" msgstr "要求的使用者資訊:" #: protocols/gadu/ui/gadusearch.ui:341 #, no-c-format msgid "Search by specified data:" msgstr "搜尋特定資料:" #: protocols/gadu/ui/gadusearch.ui:357 #, no-c-format msgid "Lookup only those that are currently online" msgstr "只搜尋目前上線的使用者" #: protocols/gadu/ui/gadusearch.ui:450 #, no-c-format msgid "Age" msgstr "年紀" #: protocols/gadu/ui/gadusearch.ui:461 #, no-c-format msgid "City" msgstr "城市" #: protocols/gadu/ui/gadusearch.ui:472 #: protocols/oscar/icq/ui/icqsearchbase.ui:361 #, no-c-format msgid "UIN" msgstr "UIN" #: protocols/gadu/ui/gadusearch.ui:483 #, no-c-format msgid "12" msgstr "12" #: protocols/gadu/ui/gadusearch.ui:486 #, no-c-format msgid "DONT_TRANSLATE" msgstr "DONT_TRANSLATE" #: protocols/gadu/ui/gadusearch.ui:489 protocols/gadu/ui/gadusearch.ui:495 #, no-c-format msgid "DONT_TRANSL" msgstr "DONT_TRANSL" #: protocols/gadu/ui/gadusearch.ui:492 #, no-c-format msgid "999" msgstr "999" #: protocols/gadu/ui/gadusearch.ui:498 #, no-c-format msgid "245324956234" msgstr "245324956234" #: protocols/groupwise/gwaddui.ui:38 protocols/sms/ui/smsactprefs.ui:82 #, no-c-format msgid "&Account name:" msgstr "帳號名稱(&A):" #: protocols/groupwise/gwaddui.ui:44 protocols/groupwise/gwaddui.ui:47 #: protocols/groupwise/gwaddui.ui:55 protocols/groupwise/gwaddui.ui:58 #, no-c-format msgid "The account name of the account you would like to add." msgstr "您要加入的帳號的帳號名稱。" #: protocols/groupwise/gwaddui.ui:68 #, no-c-format msgid "Contact Type" msgstr "聯絡人類型" #: protocols/groupwise/gwaddui.ui:79 #, no-c-format msgid "&Echo" msgstr "Echo(&E)" #: protocols/groupwise/gwaddui.ui:85 protocols/groupwise/gwaddui.ui:88 #, no-c-format msgid "" "Hey look! Only one option. Could you please make this a dropdown and add " "Null?" msgstr "" "Hey look! Only one option. Could you please make this a dropdown and add " "Null?" #: protocols/groupwise/ui/gwaccountpreferences.ui:16 #, no-c-format msgid "Account Preferences - Groupwise" msgstr "Groupwise 的帳號喜好設定" #: protocols/groupwise/ui/gwaccountpreferences.ui:67 #, no-c-format msgid "&User ID:" msgstr "使用者代號(&U):" #: protocols/groupwise/ui/gwaccountpreferences.ui:73 #: protocols/groupwise/ui/gwaccountpreferences.ui:76 #: protocols/groupwise/ui/gwaccountpreferences.ui:84 #: protocols/groupwise/ui/gwaccountpreferences.ui:87 #, no-c-format msgid "The account name of your account." msgstr "您的帳號的帳號名稱。" #: protocols/groupwise/ui/gwaccountpreferences.ui:105 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:112 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:99 #: protocols/yahoo/ui/yahooeditaccountbase.ui:106 #, no-c-format msgid "" "Check to disable automatic connection. If checked, you may connect to this " "account manually using the icon in the bottom of the main Kopete window" msgstr "" "勾選此選項關閉自動連線。您還是可以用 Kopete 主視窗底下的圖示按鈕來手動連線。" #: protocols/groupwise/ui/gwaccountpreferences.ui:152 #: protocols/groupwise/ui/gwaccountpreferences.ui:169 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:371 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:388 #, no-c-format msgid "The IP address or hostname of the server you would like to connect to." msgstr "您要連線的伺服器的 IP 位址或主機名稱。" #: protocols/groupwise/ui/gwaccountpreferences.ui:155 #: protocols/groupwise/ui/gwaccountpreferences.ui:172 #, no-c-format msgid "" "The IP address or hostname of the server you would like to connect to (for " "example im.yourcorp.com)." msgstr "您要連線的伺服器的 IP 位址或主機名稱(例如:im.yourcorp.com)。" #: protocols/groupwise/ui/gwaccountpreferences.ui:191 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:410 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:187 #: protocols/oscar/icq/ui/icqeditaccountui.ui:265 #, no-c-format msgid "Po&rt:" msgstr "連接埠(&R):" #: protocols/groupwise/ui/gwaccountpreferences.ui:197 #: protocols/groupwise/ui/gwaccountpreferences.ui:231 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:416 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:450 #, no-c-format msgid "The port on the server that you would like to connect to." msgstr "您要連線的伺服器的連接埠。" #: protocols/groupwise/ui/gwaccountpreferences.ui:200 #: protocols/groupwise/ui/gwaccountpreferences.ui:234 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:419 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:453 #, no-c-format msgid "" "The port on the server that you would like to connect to (default is 5222)." msgstr "您要連線的伺服器的連接埠。預設為 5222。" #: protocols/groupwise/ui/gwaccountpreferences.ui:248 #, no-c-format msgid "Advanced &Options" msgstr "進階選項(&O)" #: protocols/groupwise/ui/gwaccountpreferences.ui:259 #: protocols/groupwise/ui/gwshowinvitation.ui:129 #, no-c-format msgid "A&lways accept invitations" msgstr "永遠接受邀請(&L)" #: protocols/groupwise/ui/gwaddui.ui:16 #, no-c-format msgid "TestbedAddUI" msgstr "TestbedAddUI" #: protocols/groupwise/ui/gwaddui.ui:40 #, no-c-format msgid "&Basic" msgstr "基本(&B)" #: protocols/groupwise/ui/gwaddui.ui:51 #, no-c-format msgid "Add Using" msgstr "新增使用" #: protocols/groupwise/ui/gwaddui.ui:65 #, no-c-format msgid "A full or partial name. Asterisks are ignored" msgstr "完整或部份的名稱。星號 * 會被忽略。" #: protocols/groupwise/ui/gwaddui.ui:68 #, no-c-format msgid "Type some or all of the contact's name. Matches will be shown below" msgstr "輸入部份或完整的聯絡人名稱。符合的聯絡人會顯示在下方" #: protocols/groupwise/ui/gwaddui.ui:76 #, no-c-format msgid "User &ID:" msgstr "使用者代號(&I):" #: protocols/groupwise/ui/gwaddui.ui:90 #, no-c-format msgid "Userna&me:" msgstr "使用者名稱(&M):" #: protocols/groupwise/ui/gwaddui.ui:101 #, no-c-format msgid "A correct User ID" msgstr "正確的使用者代號" #: protocols/groupwise/ui/gwaddui.ui:104 #, no-c-format msgid "" "Use this field to add a contact if you already know the user's exact User ID" msgstr "如果您已經知到某使用者的正確代號,您可以使用此欄位以加入聯絡人。" #: protocols/groupwise/ui/gwchatpropswidget.ui:16 #, no-c-format msgid "GroupWiseChatPropertiesWidget" msgstr "GroupWiseChatPropertiesWidget" #: protocols/groupwise/ui/gwchatpropswidget.ui:27 #, no-c-format msgid "DISPLAY NAME" msgstr "顯示名稱" #: protocols/groupwise/ui/gwchatpropswidget.ui:49 #, no-c-format msgid "The user who created the chatroom" msgstr "建立此聊天室的使用者" #: protocols/groupwise/ui/gwchatpropswidget.ui:57 #, no-c-format msgid "Query:" msgstr "查詢:" #: protocols/groupwise/ui/gwchatpropswidget.ui:68 #, no-c-format msgid "Topic:" msgstr "主題:" #: protocols/groupwise/ui/gwchatpropswidget.ui:85 #, no-c-format msgid "A disclaimer for users entering the chatroom" msgstr "給進入此聊天室的使用者的聲明" #: protocols/groupwise/ui/gwchatpropswidget.ui:93 #, no-c-format msgid "Owner:" msgstr "擁有者:" #: protocols/groupwise/ui/gwchatpropswidget.ui:110 #, no-c-format msgid "The current topic of the discussion" msgstr "目前討論的主題" #: protocols/groupwise/ui/gwchatpropswidget.ui:124 #, no-c-format msgid "UNKNOWN" msgstr "未知" #: protocols/groupwise/ui/gwchatpropswidget.ui:132 #, no-c-format msgid "Maximum Users:" msgstr "最大使用者數:" #: protocols/groupwise/ui/gwchatpropswidget.ui:143 #, no-c-format msgid "Created on:" msgstr "建立於:" #: protocols/groupwise/ui/gwchatpropswidget.ui:154 #, no-c-format msgid "Disclaimer:" msgstr "聲明:" #: protocols/groupwise/ui/gwchatpropswidget.ui:171 #, no-c-format msgid "General description of the chatroom" msgstr "此聊天室的一般描述" #: protocols/groupwise/ui/gwchatpropswidget.ui:185 #, no-c-format msgid "Maximum simultaneous users allowed in the chatroom" msgstr "允許同時進入此聊天室的最大使用者數量" #: protocols/groupwise/ui/gwchatpropswidget.ui:193 #, no-c-format msgid "Creator:" msgstr "建立者:" #: protocols/groupwise/ui/gwchatpropswidget.ui:221 #, no-c-format msgid "Date and time the chatroom was created" msgstr "此聊天室的建立日期與時間" #: protocols/groupwise/ui/gwchatpropswidget.ui:229 #, no-c-format msgid "Archived" msgstr "已歸檔" #: protocols/groupwise/ui/gwchatpropswidget.ui:235 #, no-c-format msgid "Indicates if the chatroom is being archived on the server" msgstr "指出此聊天室已在伺服器上紀錄歸檔" #: protocols/groupwise/ui/gwchatpropswidget.ui:249 #, no-c-format msgid "The user who owns this chatroom" msgstr "擁有此聊天室的使用者" #: protocols/groupwise/ui/gwchatpropswidget.ui:273 #, no-c-format msgid "Default Access" msgstr "預設存取權限" #: protocols/groupwise/ui/gwchatpropswidget.ui:290 #, no-c-format msgid "General permission to read messages in the chatroom" msgstr "此聊天室中讀取訊息的一般權限" #: protocols/groupwise/ui/gwchatpropswidget.ui:298 #, no-c-format msgid "Write Message" msgstr "寫入訊息" #: protocols/groupwise/ui/gwchatpropswidget.ui:304 #, no-c-format msgid "General permission to write messages in the chatroom" msgstr "此聊天室中寫入訊息的一般權限" #: protocols/groupwise/ui/gwchatpropswidget.ui:312 #, no-c-format msgid "Modify Access" msgstr "變更權限" #: protocols/groupwise/ui/gwchatpropswidget.ui:318 #, no-c-format msgid "General permission to modify the chatroom's access control list" msgstr "變更此聊天室存取控制清單的一般權限" #: protocols/groupwise/ui/gwchatpropswidget.ui:328 #, no-c-format msgid "Access Control List" msgstr "存取控制清單" #: protocols/groupwise/ui/gwchatpropswidget.ui:339 #, no-c-format msgid "Access permissions for specific users" msgstr "特定使用者的存取權限" #: protocols/groupwise/ui/gwchatpropswidget.ui:355 #, no-c-format msgid "A&dd" msgstr "新增(&D)" #: protocols/groupwise/ui/gwchatpropswidget.ui:358 #, no-c-format msgid "Add a new ACL entry" msgstr "新增存取控制清單的項目" #: protocols/groupwise/ui/gwchatpropswidget.ui:366 #, no-c-format msgid "Ed&it" msgstr "編輯(&I)" #: protocols/groupwise/ui/gwchatpropswidget.ui:369 #, no-c-format msgid "Edit an existing ACL entry" msgstr "編輯現有的存取控制清單項目" #: protocols/groupwise/ui/gwchatpropswidget.ui:377 #, no-c-format msgid "D&elete" msgstr "刪除(&E)" #: protocols/groupwise/ui/gwchatpropswidget.ui:380 #, no-c-format msgid "Delete a ACL entry" msgstr "刪除存取控制清單的項目" #: protocols/groupwise/ui/gwchatsearchwidget.ui:22 #, no-c-format msgid "Chatroom " msgstr "聊天室" #: protocols/groupwise/ui/gwchatsearchwidget.ui:33 #, no-c-format msgid "Owner" msgstr "擁有者" #: protocols/groupwise/ui/gwchatsearchwidget.ui:104 #: protocols/winpopup/ui/wpaddcontactbase.ui:148 #, no-c-format msgid "&Refresh" msgstr "刷新(&R)" #: protocols/groupwise/ui/gwcontactpropswidget.ui:32 #, no-c-format msgid "USER_ID" msgstr "USER_ID" #: protocols/groupwise/ui/gwcontactpropswidget.ui:68 #: protocols/groupwise/ui/gwcontactpropswidget.ui:90 #: protocols/groupwise/ui/gwcontactpropswidget.ui:131 #, no-c-format msgid "Change the display name used for this contact" msgstr "改變此聯絡人使用的顯示名稱" #: protocols/groupwise/ui/gwcontactpropswidget.ui:98 #, no-c-format msgid "USER_STATUS" msgstr "USER_STATUS" #: protocols/groupwise/ui/gwcontactpropswidget.ui:114 #, no-c-format msgid "&Display name:" msgstr "顯示名稱(&D):" #: protocols/groupwise/ui/gwcontactpropswidget.ui:163 #, no-c-format msgid "Additional properties:" msgstr "額外屬性:" #: protocols/groupwise/ui/gwcontactpropswidget.ui:169 #, no-c-format msgid "Property" msgstr "屬性" #: protocols/groupwise/ui/gwcontactpropswidget.ui:180 #, no-c-format msgid "Value" msgstr "數值" #: protocols/groupwise/ui/gwcontactsearch.ui:16 #, no-c-format msgid "Search GroupWise Messenger" msgstr "搜尋 GroupWise 信差" #: protocols/groupwise/ui/gwcontactsearch.ui:35 #, no-c-format msgid "&First name" msgstr "名(&F)" #: protocols/groupwise/ui/gwcontactsearch.ui:46 #, no-c-format msgid "&User ID" msgstr "使用者代號(&U)" #: protocols/groupwise/ui/gwcontactsearch.ui:57 #, no-c-format msgid "&Title" msgstr "職稱(&T)" #: protocols/groupwise/ui/gwcontactsearch.ui:78 #, no-c-format msgid "&Department" msgstr "部門(&D)" #: protocols/groupwise/ui/gwcontactsearch.ui:87 #: protocols/groupwise/ui/gwcontactsearch.ui:107 #: protocols/groupwise/ui/gwcontactsearch.ui:132 #: protocols/groupwise/ui/gwcontactsearch.ui:171 #: protocols/groupwise/ui/gwcontactsearch.ui:212 #, no-c-format msgid "contains" msgstr "內含" #: protocols/groupwise/ui/gwcontactsearch.ui:92 #: protocols/groupwise/ui/gwcontactsearch.ui:112 #: protocols/groupwise/ui/gwcontactsearch.ui:137 #: protocols/groupwise/ui/gwcontactsearch.ui:176 #: protocols/groupwise/ui/gwcontactsearch.ui:217 #, no-c-format msgid "begins with" msgstr "開頭為" #: protocols/groupwise/ui/gwcontactsearch.ui:97 #: protocols/groupwise/ui/gwcontactsearch.ui:117 #: protocols/groupwise/ui/gwcontactsearch.ui:142 #: protocols/groupwise/ui/gwcontactsearch.ui:181 #: protocols/groupwise/ui/gwcontactsearch.ui:222 #, no-c-format msgid "equals" msgstr "等於" #: protocols/groupwise/ui/gwcontactsearch.ui:154 #, no-c-format msgid "Last &name" msgstr "姓(&N)" #: protocols/groupwise/ui/gwcontactsearch.ui:165 #, no-c-format msgid "Cl&ear" msgstr "清除(&E)" #: protocols/groupwise/ui/gwcontactsearch.ui:203 #: protocols/jabber/ui/dlgbrowse.ui:154 protocols/oscar/icq/ui/icqadd.ui:86 #: protocols/oscar/icq/ui/icqsearchbase.ui:440 #, no-c-format msgid "&Search" msgstr "搜尋(&S)" #: protocols/groupwise/ui/gwcontactsearch.ui:250 #, no-c-format msgid "&Results:" msgstr "結果(&R):" #: protocols/groupwise/ui/gwcontactsearch.ui:300 #, no-c-format msgid "User ID" msgstr "使用者代號" #: protocols/groupwise/ui/gwcontactsearch.ui:335 #, no-c-format msgid "Detai&ls" msgstr "詳細資料(&L)" #: protocols/groupwise/ui/gwcontactsearch.ui:364 #, no-c-format msgid "0 matching users found" msgstr "找不到符合的使用者" #: protocols/groupwise/ui/gwcustomstatusedit.ui:54 #, no-c-format msgid "&Status:" msgstr "狀態(&S):" #: protocols/groupwise/ui/gwcustomstatusedit.ui:65 #, no-c-format msgid "Awa&y message:" msgstr "離開訊息(&Y)" #: protocols/groupwise/ui/gwcustomstatuswidget.ui:36 #, no-c-format msgid "Auto Reply" msgstr "自動回覆" #: protocols/groupwise/ui/gwprivacy.ui:24 #, no-c-format msgid "Who can see my online status and send me messages:" msgstr "誰能看到我上線狀態及送訊息給我:" #: protocols/groupwise/ui/gwprivacy.ui:48 #, no-c-format msgid "A&llowed" msgstr "允許(&L)" #: protocols/groupwise/ui/gwprivacy.ui:91 #, no-c-format msgid "&Block >>" msgstr "封鎖>> (&B)" #: protocols/groupwise/ui/gwprivacy.ui:99 #, no-c-format msgid "<< Allo&w" msgstr "<<允許 (&W)" #: protocols/groupwise/ui/gwprivacy.ui:124 #, no-c-format msgid "A&dd..." msgstr "加入(&D)..." #: protocols/groupwise/ui/gwprivacy.ui:167 #, no-c-format msgid "Bloc&ked" msgstr "封鎖(&K)" #: protocols/groupwise/ui/gwshowinvitation.ui:35 #, no-c-format msgid "

From:

" msgstr "

寄件者:

" #: protocols/groupwise/ui/gwshowinvitation.ui:43 #, no-c-format msgid "

Sent:

" msgstr "

送件人:

" #: protocols/groupwise/ui/gwshowinvitation.ui:59 #, no-c-format msgid "INVITE_DATE_TIME" msgstr "INVITE_DATE_TIME" #: protocols/groupwise/ui/gwshowinvitation.ui:67 #, no-c-format msgid "CONTACT_NAME" msgstr "CONTACT_NAME" #: protocols/groupwise/ui/gwshowinvitation.ui:83 #, no-c-format msgid "INVITE_MESSAGE" msgstr "INVITE_MESSAGE" #: protocols/groupwise/ui/gwshowinvitation.ui:102 #, no-c-format msgid "Would you like to join the conversation?" msgstr "您要加入此對話嗎?" #: protocols/irc/ui/ircadd.ui:59 #, no-c-format msgid "N&ickname/channel to add:" msgstr "要增加的暱稱/頻道(&I):" #: protocols/irc/ui/ircadd.ui:65 protocols/irc/ui/ircadd.ui:76 #, no-c-format msgid "The name of the IRC contact or channel you would like to add." msgstr "您要加入的 IRC 聯絡人或頻道名稱。" #: protocols/irc/ui/ircadd.ui:68 #, no-c-format msgid "" "The name of the IRC contact or channel you would like to add. You may type " "simply the text of a person's nickname, or you may type a channel name, " "preceded by a pound sign ('#')." msgstr "" "您要加入的 IRC 聯絡人或頻道名稱。您可以只輸入某人的暱稱,或是某個頻道名稱(前" "面要加上 # 號)。" #: protocols/irc/ui/ircadd.ui:79 #, no-c-format msgid "" "The name of the IRC contact or channel you would like to add. You may type " "simply the text of a person's nickname, or you may type a channel name, " "preceded by a pound sign ('#')" msgstr "" "您要加入的 IRC 聯絡人或頻道名稱。您可以只輸入某人的暱稱,或是某個頻道名稱(前" "面要加上 # 號)。" #: protocols/irc/ui/ircadd.ui:89 #, no-c-format msgid "(for example: joe_bob or #somechannel)" msgstr "(例如:joe_bob 或 #somechannel)" #: protocols/irc/ui/ircadd.ui:119 #, no-c-format msgid "&Search Channels" msgstr "搜尋頻道(&S)" #: protocols/irc/ui/irceditaccount.ui:92 #, no-c-format msgid "" "

Note: Most IRC servers do not require a password, and only a " "nickname is required to connect

" msgstr "" "

注意:大部份的 IRC 伺服器不需要密碼,只要有暱稱就可以連線了

" #: protocols/irc/ui/irceditaccount.ui:126 #: protocols/irc/ui/irceditaccount.ui:156 #, no-c-format msgid "This is the name that everyone will see everytime you say something" msgstr "這是當您在談話時大家會看到的您的名稱。" #: protocols/irc/ui/irceditaccount.ui:134 #, no-c-format msgid "Alternate ni&ckname:" msgstr "備用暱稱(&C):" #: protocols/irc/ui/irceditaccount.ui:140 #: protocols/irc/ui/irceditaccount.ui:167 #: protocols/irc/ui/irceditaccount.ui:170 #, no-c-format msgid "" "When the nickname is already in use when connecting, this name will be used " "instead" msgstr "連線時,若您的暱稱已被使用,則會改用這個暱稱。" #: protocols/irc/ui/irceditaccount.ui:159 #, no-c-format msgid "" "The alias you would like to use on IRC. You may change this once online " "with the /nick command." msgstr "您在 IRC 上使用的別名。您可以在線上使用 /nick 命令來修改。" #: protocols/irc/ui/irceditaccount.ui:183 #, no-c-format msgid "&Real name:" msgstr "真實名稱(&R):" #: protocols/irc/ui/irceditaccount.ui:194 #, no-c-format msgid "&Username:" msgstr "使用者名稱(&U):" #: protocols/irc/ui/irceditaccount.ui:200 #: protocols/irc/ui/irceditaccount.ui:219 #: protocols/irc/ui/irceditaccount.ui:222 #: protocols/irc/ui/irceditaccount.ui:244 #, no-c-format msgid "" "The username you would prefer to use on IRC, if your system does not have " "identd support. Leave blank to use your system account name." msgstr "" "如果您的系統沒有 identd 支援,您可以在這裡設定您在 IRC 上使用的使用者名稱。若" "留白則使用您系統帳號的名稱。" #: protocols/irc/ui/irceditaccount.ui:241 #, no-c-format msgid "" "The username you would prefer to use on IRC, if your system does not have " "identd support." msgstr "" "如果您的系統沒有 identd 支援,您可以在這裡設定您在 IRC 上使用的使用者名稱。" #: protocols/irc/ui/irceditaccount.ui:256 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:111 #, no-c-format msgid "Connection" msgstr "連線" #: protocols/irc/ui/irceditaccount.ui:323 #, no-c-format msgid "&Edit..." msgstr "編輯(&E)..." #: protocols/irc/ui/irceditaccount.ui:350 #, no-c-format msgid "&Network:" msgstr "網路(&N):" #: protocols/irc/ui/irceditaccount.ui:382 #, no-c-format msgid "&Prefer SSL-based connections" msgstr "預設使用 SSL 連線(&P)" #: protocols/irc/ui/irceditaccount.ui:393 #: protocols/oscar/icq/ui/icqeditaccountui.ui:108 #, no-c-format msgid "" "If you check that case, the account will not be connected when you press the " "\"Connect All\" button, or at startup even if you selected to automatically " "connect at startup" msgstr "" "勾選此選項,則在您按下「全部連線」,或是程式剛啟動時,這個帳號不會被連線,即" "使您設定啟動時自動連線也一樣。" #: protocols/irc/ui/irceditaccount.ui:409 #, no-c-format msgid "Default &charset:" msgstr "預設字元集(&C):" #: protocols/irc/ui/irceditaccount.ui:446 #, no-c-format msgid "Default Messages" msgstr "預設的訊息" #: protocols/irc/ui/irceditaccount.ui:457 #, no-c-format msgid "&Part message:" msgstr "離開訊息(&P):" #: protocols/irc/ui/irceditaccount.ui:468 #, no-c-format msgid "&Quit message:" msgstr "離線訊息(&Q):" #: protocols/irc/ui/irceditaccount.ui:479 #: protocols/irc/ui/irceditaccount.ui:482 #, no-c-format msgid "" "The message you want people to see when you part a channel without giving a " "reason. Leave this field blank to use the Kopete default message." msgstr "" "您離開一個頻道而沒有給理由時,其他人會看到的訊息。留白則會使用 Kopete 預設的" "訊息。" #: protocols/irc/ui/irceditaccount.ui:490 #: protocols/irc/ui/irceditaccount.ui:493 #, no-c-format msgid "" "The message you want people to see when you disconnect from IRC without " "giving a reason. Leave this field blank to use the Kopete default message." msgstr "" "您離開 IRC 而沒有給理由時,其他人會看到的訊息。留白則會使用 Kopete 預設的訊" "息。" #: protocols/irc/ui/irceditaccount.ui:522 #, no-c-format msgid "A&dvanced Configuration" msgstr "進階設定(&D)" #: protocols/irc/ui/irceditaccount.ui:533 #, no-c-format msgid "Message Destinations" msgstr "訊息目的地" #: protocols/irc/ui/irceditaccount.ui:544 #, no-c-format msgid "Auto-show anonymous windows" msgstr "自動顯示匿名視窗" #: protocols/irc/ui/irceditaccount.ui:552 #, no-c-format msgid "Auto-show the server window" msgstr "自動顯示伺服器視窗" #: protocols/irc/ui/irceditaccount.ui:568 #, no-c-format msgid "Server messages:" msgstr "伺服器訊息:" #: protocols/irc/ui/irceditaccount.ui:576 #, no-c-format msgid "Server notices:" msgstr "伺服器通知:" #: protocols/irc/ui/irceditaccount.ui:582 #: protocols/irc/ui/irceditaccount.ui:615 #: protocols/irc/ui/irceditaccount.ui:666 #: protocols/irc/ui/irceditaccount.ui:704 #, no-c-format msgid "Active Window" msgstr "作用中視窗" #: protocols/irc/ui/irceditaccount.ui:587 #: protocols/irc/ui/irceditaccount.ui:620 #: protocols/irc/ui/irceditaccount.ui:671 #: protocols/irc/ui/irceditaccount.ui:709 #, no-c-format msgid "Server Window" msgstr "伺服器視窗" #: protocols/irc/ui/irceditaccount.ui:592 #: protocols/irc/ui/irceditaccount.ui:625 #: protocols/irc/ui/irceditaccount.ui:676 #: protocols/irc/ui/irceditaccount.ui:714 #, no-c-format msgid "Anonymous Window" msgstr "匿名視窗" #: protocols/irc/ui/irceditaccount.ui:597 #: protocols/irc/ui/irceditaccount.ui:630 #: protocols/irc/ui/irceditaccount.ui:681 #: protocols/irc/ui/irceditaccount.ui:719 #, no-c-format msgid "KNotify" msgstr "KNotify" #: protocols/irc/ui/irceditaccount.ui:660 #, no-c-format msgid "Error messages:" msgstr "錯誤訊息:" #: protocols/irc/ui/irceditaccount.ui:698 #, no-c-format msgid "Information replies:" msgstr "資訊回應:" #: protocols/irc/ui/irceditaccount.ui:754 #, no-c-format msgid "Custom CTCP Replies" msgstr "自訂 CTCP 回應" #: protocols/irc/ui/irceditaccount.ui:763 #, no-c-format msgid "CTCP" msgstr "CTCP" #: protocols/irc/ui/irceditaccount.ui:807 #, no-c-format msgid "" "You can use this dialog to add custom replies for when people send CTCP " "requests to you. You can also use this dialog to override the built-in " "replies for VERSION, USERINFO, and CLIENTINFO." msgstr "" "您可以在這個視窗設定當某人送出 CTCP 要求給您時您的回應。這可以覆蓋內建對 " "VERSION,USERINFO 與 CLIENTINFO 的回應。" #: protocols/irc/ui/irceditaccount.ui:823 #, no-c-format msgid "&CTCP:" msgstr "CTCP(&C):" #: protocols/irc/ui/irceditaccount.ui:839 #, no-c-format msgid "&Reply:" msgstr "回覆(&R):" #: protocols/irc/ui/irceditaccount.ui:855 #, no-c-format msgid "Add Repl&y" msgstr "加入回覆(&Y)" #: protocols/irc/ui/irceditaccount.ui:881 #, no-c-format msgid "Run Following Commands on Connect" msgstr "連線時執行下列命令" #: protocols/irc/ui/irceditaccount.ui:913 #, no-c-format msgid "Add Co&mmand" msgstr "加入命令(&M)" #: protocols/irc/ui/irceditaccount.ui:954 #: protocols/irc/ui/irceditaccount.ui:957 #, no-c-format msgid "" "Any commands added here will be run as soon as you are connected to the IRC " "server." msgstr "加到這裡的命令,會在您連接到 IRC 伺服器時立刻被執行。" #: protocols/irc/ui/networkconfig.ui:16 #, no-c-format msgid "Network Configuration" msgstr "網路設定" #: protocols/irc/ui/networkconfig.ui:40 #, no-c-format msgid "&Description:" msgstr "描述(&D):" #: protocols/irc/ui/networkconfig.ui:62 #, no-c-format msgid "Host Con&figuration" msgstr "主機設定(&F)" #: protocols/irc/ui/networkconfig.ui:81 #, no-c-format msgid "The IRC servers associated with this network" msgstr "與此網路相關的 IRC 伺服器" #: protocols/irc/ui/networkconfig.ui:84 #, no-c-format msgid "" "The IRC servers associated with this network. Use the up and down buttons to " "alter the order in which connections are attempted." msgstr "與此網路相關的 IRC 伺服器。使用上下鍵來改變連接的順序。" #: protocols/irc/ui/networkconfig.ui:95 #, no-c-format msgid "Most IRC servers do not require a password" msgstr "大部份的 IRC 伺服器不需要密碼" #: protocols/irc/ui/networkconfig.ui:103 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:707 #, no-c-format msgid "Por&t:" msgstr "連接埠(&T):" #: protocols/irc/ui/networkconfig.ui:139 #, no-c-format msgid "&Host:" msgstr "主機(&H):" #: protocols/irc/ui/networkconfig.ui:161 #, no-c-format msgid "Use SS&L" msgstr "使用 SSL(&L)" #: protocols/irc/ui/networkconfig.ui:164 #, no-c-format msgid "Check this to enable SSL for this connection" msgstr "勾選此選項以開啟 SSL 連線" #: protocols/irc/ui/networkconfig.ui:224 #, no-c-format msgid "Down" msgstr "下移" #: protocols/irc/ui/networkconfig.ui:227 #, no-c-format msgid "Move this server down" msgstr "下移這個伺服器" #: protocols/irc/ui/networkconfig.ui:230 #, no-c-format msgid "Move this server down in connection attempt priority" msgstr "將此伺服器的連線優先權往下移" #: protocols/irc/ui/networkconfig.ui:258 #, no-c-format msgid "Up" msgstr "上移" #: protocols/irc/ui/networkconfig.ui:261 #, no-c-format msgid "Move this server up" msgstr "上移這個伺服器" #: protocols/irc/ui/networkconfig.ui:264 #, no-c-format msgid "Move this server up in connection attempt priority" msgstr "將此伺服器的連線優先權往上移" #: protocols/irc/ui/networkconfig.ui:290 #, no-c-format msgid "Ne&w" msgstr "新增(&W)" #: protocols/irc/ui/networkconfig.ui:328 #, no-c-format msgid "Rena&me..." msgstr "重新命名(&M)..." #: protocols/irc/ui/networkconfig.ui:336 #, no-c-format msgid "Remo&ve" msgstr "移除(&V)" #: protocols/jabber/jingle/jinglevoicesessiondialogbase.ui:16 #, no-c-format msgid "JabberVoiceSessionDialogBase" msgstr "JabberVoiceSessionDialogBase" #: protocols/jabber/jingle/jinglevoicesessiondialogbase.ui:60 #, no-c-format msgid "Voice session with:" msgstr "語音聯繫:" #: protocols/jabber/jingle/jinglevoicesessiondialogbase.ui:178 #, no-c-format msgid "Contact displayname" msgstr "聯絡人顯示名稱" #: protocols/jabber/jingle/jinglevoicesessiondialogbase.ui:266 #, no-c-format msgid "Accep&t" msgstr "接受(&T)" #: protocols/jabber/jingle/jinglevoicesessiondialogbase.ui:277 #, no-c-format msgid "&Decline" msgstr "婉拒(&D)" #: protocols/jabber/jingle/jinglevoicesessiondialogbase.ui:288 #, no-c-format msgid "Termi&nate" msgstr "終結(&N)" #: protocols/jabber/jingle/jinglevoicesessiondialogbase.ui:323 #, no-c-format msgid "Current status:" msgstr "目前狀態:" #: protocols/jabber/jingle/jinglevoicesessiondialogbase.ui:339 #, no-c-format msgid "Session status" msgstr "階段狀態" #: protocols/jabber/ui/dlgaddcontact.ui:16 #, no-c-format msgid "Add Contacts" msgstr "加入聯絡人" #: protocols/jabber/ui/dlgaddcontact.ui:41 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:71 #, no-c-format msgid "&Jabber ID:" msgstr "Jabber 代號(&J):" #: protocols/jabber/ui/dlgaddcontact.ui:50 #: protocols/jabber/ui/dlgaddcontact.ui:61 #, no-c-format msgid "The Jabber ID for the account you would like to add." msgstr "您要加入此帳號的 Jabber 代號。" #: protocols/jabber/ui/dlgaddcontact.ui:53 #: protocols/jabber/ui/dlgaddcontact.ui:64 #, no-c-format msgid "" "The Jabber ID for the account you would like to add. Note that this must " "include the username and the domain (like an E-mail address), as there are " "many Jabber servers." msgstr "" "您要加入此帳號的 Jabber 代號。注意,必須包含使用者名稱與網域(像是電子郵件地" "址),因為有許多 Jabber 伺服器。" #: protocols/jabber/ui/dlgaddcontact.ui:74 #, no-c-format msgid "(for example: joe@jabber.org)" msgstr "(例如:joe@jabber.org)" #: protocols/jabber/ui/dlgbrowse.ui:34 #, no-c-format msgid "Search For" msgstr "我想找" #: protocols/jabber/ui/dlgbrowse.ui:48 #, no-c-format msgid "Please wait while retrieving search form..." msgstr "請稍候,取得伺服器表格中..." #: protocols/jabber/ui/dlgbrowse.ui:59 #, no-c-format msgid "JID" msgstr "JID" #: protocols/jabber/ui/dlgbrowse.ui:74 #, no-c-format msgid "Nick" msgstr "暱稱" #: protocols/jabber/ui/dlgchangepassword.ui:24 #, no-c-format msgid "Current password:" msgstr "目前密碼:" #: protocols/jabber/ui/dlgchangepassword.ui:32 #: protocols/jabber/ui/dlgchangepassword.ui:40 #, no-c-format msgid "New password:" msgstr "新的密碼:" #: protocols/jabber/ui/dlgchangepassword.ui:71 #, no-c-format msgid "" "Please enter your current password first\n" "and then your new password twice." msgstr "請先輸入您目前的密碼,再輸入新密碼兩次。" #: protocols/jabber/ui/dlgchatjoin.ui:47 #, no-c-format msgid "Room:" msgstr "聊天室:" #: protocols/jabber/ui/dlgchatjoin.ui:55 protocols/jabber/ui/dlgservices.ui:46 #, no-c-format msgid "Server:" msgstr "伺服器:" #: protocols/jabber/ui/dlgchatjoin.ui:99 #, no-c-format msgid "Bro&wse" msgstr "瀏覽(&W)" #: protocols/jabber/ui/dlgchatroomslist.ui:35 #: protocols/jabber/ui/dlgjabberchooseserver.ui:31 #, no-c-format msgid "Server" msgstr "伺服器" #: protocols/jabber/ui/dlgchatroomslist.ui:48 #, no-c-format msgid "&Query" msgstr "查詢(&Q)" #: protocols/jabber/ui/dlgchatroomslist.ui:56 #, no-c-format msgid "Chatroom Name" msgstr "聊天室名稱" #: protocols/jabber/ui/dlgchatroomslist.ui:64 #, no-c-format msgid "Chatroom Description" msgstr "聊天室描述" #: protocols/jabber/ui/dlgchatroomslist.ui:136 #, no-c-format msgid "Clos&e" msgstr "關閉(&E)" #: protocols/jabber/ui/dlgjabberchooseserver.ui:22 #, no-c-format msgid "Choose Server - Jabber" msgstr "Jabber - 選擇伺服器" #: protocols/jabber/ui/dlgjabberchooseserver.ui:85 #, no-c-format msgid "" "
Details about free public Jabber " "servers" msgstr "" "關於 Jabber 伺服器的詳細資料" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:17 #, no-c-format msgid "Account Preferences - Jabber" msgstr "Jabber 的帳號喜好設定" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:41 #: protocols/oscar/icq/ui/icqeditaccountui.ui:37 #: protocols/yahoo/ui/yahooeditaccountbase.ui:43 #, no-c-format msgid "&Basic Setup" msgstr "基本設定(&B)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:77 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:91 #, no-c-format msgid "The Jabber ID for the account you would like to use." msgstr "這個帳號中您想使用的 Jabber ID。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:80 #, no-c-format msgid "" "The Jabber ID for the account you would like to use. Note that this must " "include the username and the domain (like an E-mail address), as there are " "many Jabber servers." msgstr "" "您要加入此帳號的 Jabber 代號。注意,必須包含使用者名稱與網域(像是電子郵件地" "址),因為有許多 Jabber 伺服器。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:94 #, no-c-format msgid "" "The Jabber ID for the account you would like to use. Note that this must " "include the username and the domain (for example, joe@jabber.org), as there " "are many Jabber servers." msgstr "" "您要加入此帳號的 Jabber 代號。注意,必須包含使用者名稱與網域(例如:" "joe@jabber.org),因為有許多 Jabber 伺服器。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:120 #: protocols/oscar/icq/ui/icqeditaccountui.ui:116 #, no-c-format msgid "Exclu&de from Global Identity" msgstr "從通用身份中排除(&D)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:163 #, no-c-format msgid "" "To connect to the Jabber network, you will need an account on a Jabber " "server. If you do not yet have an account, please click the button to " "create one." msgstr "" "要連線到 Jabber 網路,您需要一個 Jabber 伺服器的帳號。如果還沒有,請按一下按" "鈕來建立一個。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:198 #, no-c-format msgid "Change Password" msgstr "變更密碼" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:209 #, no-c-format msgid "Change &Your Password" msgstr "變更您的密碼(&Y)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:228 #, no-c-format msgid "" "If you have an existing Jabber account and would like to change its " "password, you can use this button to enter a new password." msgstr "如果您已經有 Jabber 帳號,要變更它的密碼,請按此鍵並輸入新密碼。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:260 #, no-c-format msgid "Co&nnection" msgstr "連線(&N)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:282 #: protocols/jabber/ui/dlgjabberregisteraccount.ui:122 #, no-c-format msgid "Use protocol encr&yption (SSL)" msgstr "使用加密協定(SSL)(&Y)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:285 #: protocols/jabber/ui/dlgjabberregisteraccount.ui:128 #, no-c-format msgid "Check this box to enable SSL encrypted communication with the server." msgstr "勾選此選項以開啟與伺服器間的 SSL 加密通訊。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:288 #: protocols/jabber/ui/dlgjabberregisteraccount.ui:131 #, no-c-format msgid "" "Check this box to enable SSL encrypted communication with the server. Note " "that this is not end-to-end encryption, but rather encrypted communication " "with the server." msgstr "" "勾選此選項以開啟與伺服器間的 SSL 加密通訊。注意這不是點對點的加密,只是與伺服" "器間通訊的加密。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:313 #, no-c-format msgid "" "
Select this only for old Jabber servers that use a separate SSL port. " "Newer servers use StartSSL and this option should not be required.
" msgstr "" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:324 #, no-c-format msgid "Allow plain-te&xt password authentication" msgstr "允許純文字密碼認證(&X)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:335 #: protocols/oscar/icq/ui/icqeditaccountui.ui:302 #, no-c-format msgid "&Override default server information" msgstr "覆蓋預設伺服器資訊(&O)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:374 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:391 #, no-c-format msgid "" "The IP address or hostname of the server you would like to connect to (for " "example jabber.org)." msgstr "您要連線的伺服器的 IP 位址或主機名稱(例如:jabber.org)。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:480 #, no-c-format msgid "" "
Newer Jabber servers may not work correctly if a server name and port " "are enforced, because this would prevent the use of StartSSL and a newer " "Jabber protocol.
" msgstr "" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:493 #, no-c-format msgid "Location Settings" msgstr "位置設定" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:504 #, no-c-format msgid "R&esource:" msgstr "資源(&E):" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:510 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:538 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:583 #, no-c-format msgid "The resource name you would like to use on the Jabber network." msgstr "您要在 Jabber 網路中使用的資源名稱。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:513 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:541 #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:586 #, no-c-format msgid "" "The resource name you would like to use on the Jabber network. Jabber " "allows you to sign on with the same account from multiple locations with " "different resource names, so you may wish to enter 'Home' or 'Work' here, " "for example." msgstr "" "您要在 Jabber 網路中使用的資源名稱。Jabber 允許您使用同一個帳號,在不同的位址" "使用不同的資源名稱同時簽入,您可以指定像是「家裡」或「辦公室」。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:574 #, no-c-format msgid "P&riority:" msgstr "優先順序(&R):" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:617 #, no-c-format msgid "" "Each resource can have different priority levels. The messages " "will be sent to the resource which has the highest priority level.\n" "\n" "If two resources have the same priority, the messages will be sent to the " "one connected the latest." msgstr "" "每個資源可以有不同的優先權等級。訊息會送到最高優先權的資源去。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:648 #, no-c-format msgid "Fi&le Transfer" msgstr "檔案傳輸(&L)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:659 #, no-c-format msgid "File Transfer Settings" msgstr "檔案傳輸設定" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:683 #, no-c-format msgid "Pro&xy JID:" msgstr "代理伺服器 JID(&X):" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:731 #, no-c-format msgid "Public &IP address:" msgstr "公開 IP 地址(&I):" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:744 #, no-c-format msgid "" "
  • The information in the \"public IP address\" and \"port\" fields " "apply to all Jabber accounts.
  • \n" "
  • You can leave the \"public IP address\" empty if you do not use NAT.\n" "
  • A hostname is also valid.
  • \n" "
  • Changes to these fields will only take effect the next time you start " "Kopete.
  • \n" "
  • The \"Proxy JID\" can be configured per account.
" msgstr "" "
  • 「公開 IP 位址」與「連接埠」資訊將會套用到所有的 Jabber 帳號。\n" "
  • 如果您沒有使用 NAT,您可以將「公開 IP 位址」留白。
  • \n" "
  • 也可以輸入主機名稱。
  • \n" "
  • 變更這些欄位,只會在下次啟動 Kopete 時生效。
  • \n" "
  • 「代理伺服器 JID」可以在每個帳號中設定。
" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:780 #, no-c-format msgid "Pri&vacy" msgstr "隱私(&V)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:791 #, no-c-format msgid "General Privacy" msgstr "一般隱私" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:819 #, no-c-format msgid "&Hide system and client info" msgstr "隱藏系統及客戶端資訊(&H)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:822 #, no-c-format msgid "" "By default, Kopete gives the other users some info about your system and the " "client. You can check this box in order to hide those infos." msgstr "" "Kopete 預設會將您的系統與客戶端資訊送給其他使用者。您可以勾選此選項以隱藏這些" "資訊。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:832 #, no-c-format msgid "Notifications" msgstr "通知" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:846 #, no-c-format msgid "Always send not&ifications" msgstr "總是傳送通知(&I)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:852 #, no-c-format msgid "" "Check this box if you want to always send notifications to your contacts." msgstr "如果您希望總是傳送通知給您的聯絡人,請勾選此選項。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:896 #, no-c-format msgid "Alwa&ys send delivered notifications" msgstr "總是傳送到達通知(&Y)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:902 #, no-c-format msgid "" "Check this box to send the Delivered notification to your " "contacts : when a message is delivered to Kopete, Kopete can notify your " "contact that it has received the message." msgstr "" "勾選此選項以傳送到達通知給您的聯絡人:訊息送到 Kopete 時,Kopete " "可以通知您的聯絡人訊息已經收到。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:913 #, no-c-format msgid "Al&ways send displayed notifications" msgstr "總是傳送顯示通知(&W)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:919 #, no-c-format msgid "" "Check this box to send the Displayed notification to your " "contacts : when a message is displayed in Kopete, Kopete can notify your " "contact that it has displayed the message." msgstr "" "勾選此選項以傳送顯示通知給您的聯絡人:當訊息在 Kopete 中顯示出來," "Kopete 可以通知您的聯絡人。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:930 #, no-c-format msgid "Always send &typing notifications" msgstr "總是傳送輸入通知(&T)" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:936 #, no-c-format msgid "" "Check this box to send the Typing notification to your contacts : " "when you are composing a message, you might want your contact to know that " "you are typing so that he knows you are answering." msgstr "" "勾選此選像以傳送輸入通知給您的聯絡人:當您正在輸入訊息時,您的聯絡" "人可以知道您正在輸入訊息。" #: protocols/jabber/ui/dlgjabbereditaccountwidget.ui:944 #, no-c-format msgid "Always send &gone notifications (closing the window)" msgstr "總是傳送關閉視窗通知(&G)" #: protocols/jabber/ui/dlgjabberregisteraccount.ui:22 #, no-c-format msgid "Register Account - Jabber" msgstr "註冊帳號 - Jabber" #: protocols/jabber/ui/dlgjabberregisteraccount.ui:33 #, no-c-format msgid "Desired Jabber &ID:" msgstr "想要的 Jabber 代號(&I):" #: protocols/jabber/ui/dlgjabberregisteraccount.ui:77 #, no-c-format msgid "C&hoose..." msgstr "選擇(&H)..." #: protocols/jabber/ui/dlgjabberregisteraccount.ui:156 #, no-c-format msgid "&Port:" msgstr "連接埠(&P):" #: protocols/jabber/ui/dlgjabberregisteraccount.ui:170 #, no-c-format msgid "&Repeat password:" msgstr "確認密碼(&R):" #: protocols/jabber/ui/dlgjabberregisteraccount.ui:206 #, no-c-format msgid "Jabber &server:" msgstr "Jabber 伺服器(&S):" #: protocols/jabber/ui/dlgregister.ui:24 #, no-c-format msgid "Register with Jabber Service" msgstr "註冊 Jabber 服務" #: protocols/jabber/ui/dlgregister.ui:49 #, no-c-format msgid "Registration Form" msgstr "註冊表" #: protocols/jabber/ui/dlgregister.ui:68 #, no-c-format msgid "Please wait while querying the server..." msgstr "請稍候,正在查詢伺服器..." #: protocols/jabber/ui/dlgsendraw.ui:16 #, no-c-format msgid "Send Raw XML Packet" msgstr "傳送原始 XML 封包" #: protocols/jabber/ui/dlgsendraw.ui:42 #, no-c-format msgid "Type in the packet that should be sent to the server:" msgstr "輸入應該送到伺服器的封包:" #: protocols/jabber/ui/dlgsendraw.ui:56 #, no-c-format msgid "User Defined" msgstr "使用者定義" #: protocols/jabber/ui/dlgsendraw.ui:61 #, no-c-format msgid "Account Deletion" msgstr "帳號刪除" #: protocols/jabber/ui/dlgsendraw.ui:66 #, no-c-format msgid "Availability Status" msgstr "上線狀態" #: protocols/jabber/ui/dlgsendraw.ui:71 #, no-c-format msgid "Last Active Time" msgstr "最後活動時間" #: protocols/jabber/ui/dlgsendraw.ui:76 #, no-c-format msgid "Message with Body" msgstr "訊息本文" #: protocols/jabber/ui/dlgsendraw.ui:81 #, no-c-format msgid "Message with Subject" msgstr "訊息主旨" #: protocols/jabber/ui/dlgsendraw.ui:86 #, no-c-format msgid "Add Roster Item" msgstr "新增名冊項目" #: protocols/jabber/ui/dlgsendraw.ui:91 #, no-c-format msgid "Delete Roster Item" msgstr "刪除名冊項目" #: protocols/jabber/ui/dlgsendraw.ui:116 #, no-c-format msgid "Clea&r" msgstr "清除(&R)" #: protocols/jabber/ui/dlgsendraw.ui:124 #, no-c-format msgid "&Send" msgstr "傳送(&S)" #: protocols/jabber/ui/dlgservices.ui:16 #, no-c-format msgid "Jabber Service Management" msgstr "Jabber 服務管理" #: protocols/jabber/ui/dlgservices.ui:75 #, no-c-format msgid "&Query Server" msgstr "查詢伺服器(&Q)" #: protocols/jabber/ui/dlgservices.ui:89 #, no-c-format msgid "Jid" msgstr "Jid" #: protocols/jabber/ui/dlgservices.ui:167 #, no-c-format msgid "&Browse" msgstr "瀏覽(&B)" #: protocols/jabber/ui/dlgvcard.ui:47 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:203 #, no-c-format msgid "Birthday:" msgstr "生日:" #: protocols/jabber/ui/dlgvcard.ui:78 #: protocols/oscar/icq/ui/icqworkinfowidget.ui:120 #: protocols/yahoo/ui/yahooworkinfowidget.ui:80 #, no-c-format msgid "Homepage:" msgstr "首頁:" #: protocols/jabber/ui/dlgvcard.ui:173 #, no-c-format msgid "Timezone:" msgstr "時區:" #: protocols/jabber/ui/dlgvcard.ui:204 #, no-c-format msgid "Jabber ID:" msgstr "Jabber 代號:" #: protocols/jabber/ui/dlgvcard.ui:235 #, no-c-format msgid "Full name:" msgstr "全名:" #: protocols/jabber/ui/dlgvcard.ui:269 #, no-c-format msgid "Nickname:" msgstr "暱稱:" #: protocols/jabber/ui/dlgvcard.ui:337 #, no-c-format msgid "&Select Photo..." msgstr "選擇圖片(&S)..." #: protocols/jabber/ui/dlgvcard.ui:345 #, no-c-format msgid "Clear Pho&to" msgstr "清除相片(&T)" #: protocols/jabber/ui/dlgvcard.ui:422 #, no-c-format msgid "&Home Address" msgstr "住家地址(&H)" #: protocols/jabber/ui/dlgvcard.ui:441 protocols/jabber/ui/dlgvcard.ui:735 #, no-c-format msgid "Postal code:" msgstr "郵遞區號:" #: protocols/jabber/ui/dlgvcard.ui:449 protocols/jabber/ui/dlgvcard.ui:679 #, no-c-format msgid "PO box:" msgstr "郵遞信箱:" #: protocols/jabber/ui/dlgvcard.ui:542 protocols/jabber/ui/dlgvcard.ui:705 #: protocols/oscar/icq/ui/icqgeneralinfo.ui:559 #: protocols/oscar/icq/ui/icqworkinfowidget.ui:168 #: protocols/yahoo/ui/yahooworkinfowidget.ui:112 #, no-c-format msgid "Country:" msgstr "國家:" #: protocols/jabber/ui/dlgvcard.ui:550 protocols/jabber/ui/dlgvcard.ui:743 #, no-c-format msgid "Street:" msgstr "街道:" #: protocols/jabber/ui/dlgvcard.ui:620 #, no-c-format msgid "&Work Address" msgstr "工作地址(&W)" #: protocols/jabber/ui/dlgvcard.ui:818 #, no-c-format msgid "Wor&k Information" msgstr "工作資訊(&K)" #: protocols/jabber/ui/dlgvcard.ui:864 #: protocols/oscar/icq/ui/icqworkinfowidget.ui:67 #, no-c-format msgid "Position:" msgstr "職位:" #: protocols/jabber/ui/dlgvcard.ui:882 #, no-c-format msgid "Role:" msgstr "職責:" #: protocols/jabber/ui/dlgvcard.ui:890 #: protocols/oscar/icq/ui/icqworkinfowidget.ui:51 #, no-c-format msgid "Department:" msgstr "部門:" #: protocols/jabber/ui/dlgvcard.ui:898 #, no-c-format msgid "Company:" msgstr "公司:" #: protocols/jabber/ui/dlgvcard.ui:910 #, no-c-format msgid "Phone &Numbers" msgstr "電話號碼(&N)" #: protocols/jabber/ui/dlgvcard.ui:956 #: protocols/oscar/icq/ui/icqworkinfowidget.ui:43 #, no-c-format msgid "Fax:" msgstr "傳真:" #: protocols/jabber/ui/dlgvcard.ui:969 #, no-c-format msgid "Cell:" msgstr "行動:" #: protocols/jabber/ui/dlgvcard.ui:982 #, no-c-format msgid "Work:" msgstr "工作:" #: protocols/jabber/ui/dlgvcard.ui:990 #, no-c-format msgid "Home:" msgstr "住家:" #: protocols/meanwhile/ui/meanwhileaddcontactbase.ui:16 #, no-c-format msgid "Add Sametime Contact" msgstr "新增 Sametime 聯絡人" #: protocols/meanwhile/ui/meanwhileaddcontactbase.ui:41 #, no-c-format msgid "&Userid:" msgstr "使用者代號(&U):" #: protocols/meanwhile/ui/meanwhileaddcontactbase.ui:47 #: protocols/meanwhile/ui/meanwhileaddcontactbase.ui:50 #: protocols/meanwhile/ui/meanwhileaddcontactbase.ui:58 #: protocols/meanwhile/ui/meanwhileaddcontactbase.ui:61 #, no-c-format msgid "The user id of the contact you would like to add." msgstr "您要加入的聯絡人的使用者代號。" #: protocols/meanwhile/ui/meanwhileaddcontactbase.ui:69 #, no-c-format msgid "&Find" msgstr "尋找(&F)" #: protocols/meanwhile/ui/meanwhileaddcontactbase.ui:72 #: protocols/meanwhile/ui/meanwhileaddcontactbase.ui:75 #, no-c-format msgid "Find Userid" msgstr "尋找使用者代號" #: protocols/meanwhile/ui/meanwhileaddcontactbase.ui:85 #, no-c-format msgid "(for example: johndoe)" msgstr "(例如:johndoe)" #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:16 #, no-c-format msgid "Edit Meanwhile Account" msgstr "編輯 Meanwhile 帳號" #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:61 #, no-c-format msgid "Meanwhile &username:" msgstr "Meanwhile 使用者名稱(&U):" #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:67 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:70 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:78 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:81 #, no-c-format msgid "Your Sametime userid" msgstr "您的 Sametime 使用者代號" #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:155 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:158 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:166 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:169 #, no-c-format msgid "" "The IP address or hostname of the Sametime server you wish to connect to." msgstr "您要連線的 Sametime 伺服器的 IP 位址或主機名稱。" #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:193 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:213 #, no-c-format msgid "The port on the Sametime server that you would like to connect to." msgstr "您要連線的 Sametime 伺服器的連接埠。" #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:196 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:216 #, no-c-format msgid "" "The port on the Sametime server that you would like to connect to. Usually " "this is 1533." msgstr "您要連線的 Sametime 伺服器的連接埠。通常是 1533。" #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:228 #, no-c-format msgid "Client Identifier" msgstr "客戶端識別" #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:239 #, no-c-format msgid "Use custom client identifier" msgstr "使用自訂客戶端識別" #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:266 #, no-c-format msgid "Client identifier" msgstr "客戶端識別" #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:299 #, no-c-format msgid "." msgstr "." #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:326 #, no-c-format msgid "Client version (major.minor)" msgstr "客戶端版本(主版本.次版本)" #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:341 #, no-c-format msgid "Restore &Defaults" msgstr "回復預設值(&D)" #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:344 #: protocols/meanwhile/ui/meanwhileeditaccountbase.ui:347 #, no-c-format msgid "Restore the server and port values to their defaults." msgstr "將伺服器與連接埠設回預設值。" #: protocols/oscar/icq/ui/icqadd.ui:38 #, no-c-format msgid "UIN #:" msgstr "UIN 編號:" #: protocols/oscar/icq/ui/icqadd.ui:61 #, no-c-format msgid "Alternatively, you can search the ICQ Whitepages :" msgstr "此外,您可以搜尋 ICQ 白頁:" #: protocols/oscar/icq/ui/icqauthreplyui.ui:16 #, no-c-format msgid "ICQ Authorization Reply" msgstr "ICQ 認證回覆" #: protocols/oscar/icq/ui/icqauthreplyui.ui:43 #, no-c-format msgid "Reason:" msgstr "理由:" #: protocols/oscar/icq/ui/icqauthreplyui.ui:108 #, no-c-format msgid "&Grant authorization" msgstr "認證通過(&G)" #: protocols/oscar/icq/ui/icqauthreplyui.ui:119 #, no-c-format msgid "&Decline authorization" msgstr "認證被拒(&D)" #: protocols/oscar/icq/ui/icqauthreplyui.ui:148 #, no-c-format msgid "%1 requested authorization to add you to his/her contact list." msgstr "%1 想將您加入他/她的聯絡人清單,請求您確認。" #: protocols/oscar/icq/ui/icqauthreplyui.ui:172 #, no-c-format msgid "Request Reason:" msgstr "請求理由:" #: protocols/oscar/icq/ui/icqauthreplyui.ui:188 #, no-c-format msgid "Some reason..." msgstr "某些理由..." #: protocols/oscar/icq/ui/icqeditaccountui.ui:16 #, no-c-format msgid "Account Preferences - ICQ" msgstr "ICQ 的帳號喜好設定" #: protocols/oscar/icq/ui/icqeditaccountui.ui:48 #, no-c-format msgid "Account Preferences" msgstr "帳號喜好設定" #: protocols/oscar/icq/ui/icqeditaccountui.ui:67 #, no-c-format msgid "IC&Q UIN:" msgstr "ICQ UIN(&Q):" #: protocols/oscar/icq/ui/icqeditaccountui.ui:73 #: protocols/oscar/icq/ui/icqeditaccountui.ui:84 #, no-c-format msgid "The user ID of your ICQ account." msgstr "您的 ICQ 帳號的使用者代碼。" #: protocols/oscar/icq/ui/icqeditaccountui.ui:76 #: protocols/oscar/icq/ui/icqeditaccountui.ui:87 #, no-c-format msgid "" "The user ID of your ICQ account. This should be in the form of a number (no " "decimals, no spaces)." msgstr "您的 ICQ 帳號的使用者代碼。這應該是一串數字(沒有空白與小數點)。" #: protocols/oscar/icq/ui/icqeditaccountui.ui:159 #, no-c-format msgid "" "To connect to the ICQ network, you will need an ICQ account.

\n" "If you do not currently have an ICQ account, please click the button to " "create one." msgstr "" "要連線到 ICQ 網路,您需要一個 ICQ 帳號。

\n" "如果您目前沒有 ICQ 帳號,請按此鍵以建立。" #: protocols/oscar/icq/ui/icqeditaccountui.ui:200 #, no-c-format msgid "Accou&nt Preferences" msgstr "帳號喜好設定(&N)" #: protocols/oscar/icq/ui/icqeditaccountui.ui:234 #: protocols/oscar/icq/ui/icqeditaccountui.ui:271 #, no-c-format msgid "The port on the ICQ server that you would like to connect to." msgstr "您要連線的 ICQ 伺服器的連接埠。" #: protocols/oscar/icq/ui/icqeditaccountui.ui:237 #: protocols/oscar/icq/ui/icqeditaccountui.ui:274 #, no-c-format msgid "" "The port on the ICQ server that you would like to connect to. Normally this " "is 5190." msgstr "您要連線的 ICQ 伺服器的連接埠。通常是 5190。" #: protocols/oscar/icq/ui/icqeditaccountui.ui:248 #, no-c-format msgid "login.icq.com" msgstr "login.icq.com" #: protocols/oscar/icq/ui/icqeditaccountui.ui:251 #: protocols/oscar/icq/ui/icqeditaccountui.ui:291 #, no-c-format msgid "The IP address or hostmask of the ICQ server you wish to connect to." msgstr "您要連線的 ICQ 伺服器的 IP 位址或主機遮罩。" #: protocols/oscar/icq/ui/icqeditaccountui.ui:254 #: protocols/oscar/icq/ui/icqeditaccountui.ui:294 #, no-c-format msgid "" "The IP address or hostmask of the ICQ server you wish to connect to. " "Normally you will want the default (login.icq.com)." msgstr "" "您要連線的 ICQ 伺服器的 IP 位址或主機遮罩。通常使用預設值(login.icq.com)即" "可。" #: protocols/oscar/icq/ui/icqeditaccountui.ui:285 #, no-c-format msgid "Ser&ver /" msgstr "伺服器(&V)/" #: protocols/oscar/icq/ui/icqeditaccountui.ui:312 #, no-c-format msgid "Privacy Options" msgstr "隱私選項" #: protocols/oscar/icq/ui/icqeditaccountui.ui:323 #, no-c-format msgid "&Require authorization before someone can add you to their contact list" msgstr "當其他人將您加入他們聯絡人清單時需要確認(&R)" #: protocols/oscar/icq/ui/icqeditaccountui.ui:326 #, no-c-format msgid "" "Enable authorization requirement, which will not allow users to add you to " "their contact list without authorization from you." msgstr "開啟此選項,避免其他人未經您同意就將您加入聯絡人。" #: protocols/oscar/icq/ui/icqeditaccountui.ui:329 #, no-c-format msgid "" "Enable authorization requirement, which will not allow users to add you to " "their contact list without authorization from you. Check this box, and you " "will have to confirm any users who add you to their list before they may see " "your online status." msgstr "" "開啟此選項,避免其他人未經您同意就將您加入聯絡人。勾選此選項,在您尚未確認之" "前,他們將看不到您上線。" #: protocols/oscar/icq/ui/icqeditaccountui.ui:337 #, no-c-format msgid "Hide &IP address" msgstr "隱藏 IP 位址(&I)" #: protocols/oscar/icq/ui/icqeditaccountui.ui:340 #, no-c-format msgid "" "Check this to hide your IP address from people when they view your user info" msgstr "勾選此選項,讓其他人從您的使用者資訊中看不到您的 IP 位址。" #: protocols/oscar/icq/ui/icqeditaccountui.ui:343 #, no-c-format msgid "" "Checking this box will not allow people to see what your IP address if they " "view your ICQ user details such as name, address, or age." msgstr "" "勾選此選項,其他人在檢視您的 ICQ 使用者詳情如名稱、地址、年紀時,無法看到您" "的 IP 位址。" #: protocols/oscar/icq/ui/icqeditaccountui.ui:351 #, no-c-format msgid "Make my status available via &ICQ's unified messaging center" msgstr "讓我的狀態可以在 ICQ 的統一訊息中心裡取得(&I)" #: protocols/oscar/icq/ui/icqeditaccountui.ui:357 #, no-c-format msgid "Check this box to enable Web Aware functionality." msgstr "勾選此選項以開啟網頁連線功能" #: protocols/oscar/icq/ui/icqeditaccountui.ui:360 #, no-c-format msgid "" "Check this box to enable ICQ's Web Aware functionality, which allows people " "to see your online status from ICQ's web page, and send you a message " "without necessarily having ICQ themselves." msgstr "" "勾選此選項以開啟 ICQ 的網頁連線(Web Aware)功能,讓其他人可以透過 ICQ 的網頁" "看到您的線上狀態,並送訊息給您,不需要安裝 ICQ。" #: protocols/oscar/icq/ui/icqeditaccountui.ui:398 #, no-c-format msgid "Default to the following &encoding for messages:" msgstr "預設訊息編碼(&E):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:24 #, no-c-format msgid "Location && Contact Information" msgstr "位置與聯絡人資訊" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:35 #: protocols/oscar/icq/ui/icqsearchbase.ui:270 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:558 #, no-c-format msgid "&City:" msgstr "城市(&C)" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:46 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:487 #, no-c-format msgid "&Address:" msgstr "地址(&A):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:57 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:425 #, no-c-format msgid "&Phone:" msgstr "電話(&P):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:68 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:531 #, no-c-format msgid "&State:" msgstr "省/州(&S):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:95 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:498 #, no-c-format msgid "Countr&y:" msgstr "國家(&Y):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:122 #: protocols/oscar/icq/ui/icqsearchbase.ui:222 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:282 #, no-c-format msgid "&Email:" msgstr "電子郵件(&E):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:149 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:255 #, no-c-format msgid "&Homepage:" msgstr "首頁(&H):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:200 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:371 #, no-c-format msgid "Fa&x:" msgstr "傳真(&X):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:230 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:452 #, no-c-format msgid "Ce&ll:" msgstr "行動電話(&L):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:257 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:593 #, no-c-format msgid "&Zip:" msgstr "郵遞區號(&Z):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:289 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:24 #, no-c-format msgid "Personal Information" msgstr "個人資訊" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:316 #, no-c-format msgid "&Full name:" msgstr "全名(&F):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:376 #: protocols/oscar/icq/ui/icqsearchbase.ui:233 #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:92 #, no-c-format msgid "&Nickname:" msgstr "暱稱(&N):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:387 #: protocols/oscar/icq/ui/icqsearchbase.ui:144 #, no-c-format msgid "&UIN #:" msgstr "UIN 編號(&U):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:398 #, no-c-format msgid "&Birthday:" msgstr "生日(&B):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:414 #, no-c-format msgid "Gen&der:" msgstr "性別(&D):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:449 #, no-c-format msgid "&IP:" msgstr "IP(&I):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:460 #, no-c-format msgid "&Timezone:" msgstr "時區(&T):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:471 #, no-c-format msgid "Marital status:" msgstr "婚姻狀態:" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:487 #, no-c-format msgid "A&ge:" msgstr "年紀(&G):" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:508 #, no-c-format msgid "Origin" msgstr "出生地" #: protocols/oscar/icq/ui/icqgeneralinfo.ui:567 #: protocols/oscar/icq/ui/icqworkinfowidget.ui:144 #: protocols/yahoo/ui/yahooworkinfowidget.ui:174 #, no-c-format msgid "State:" msgstr "省/州:" #: protocols/oscar/icq/ui/icqinterestinfowidget.ui:24 #, no-c-format msgid "Interests" msgstr "興趣" #: protocols/oscar/icq/ui/icqotherinfowidget.ui:41 #, no-c-format msgid "Email addresses:" msgstr "電子郵件地址:" #: protocols/oscar/icq/ui/icqotherinfowidget.ui:54 #, no-c-format msgid "Contact notes:" msgstr "聯絡人備忘錄:" #: protocols/oscar/icq/ui/icqsearchbase.ui:27 #, no-c-format msgid "C&lear" msgstr "清除(&L)" #: protocols/oscar/icq/ui/icqsearchbase.ui:33 #, no-c-format msgid "Clear the results" msgstr "清除結果" #: protocols/oscar/icq/ui/icqsearchbase.ui:47 #, no-c-format msgid "Close this dialog" msgstr "關閉對話方塊" #: protocols/oscar/icq/ui/icqsearchbase.ui:67 #, no-c-format msgid "Stops the search" msgstr "停止搜尋" #: protocols/oscar/icq/ui/icqsearchbase.ui:87 #, no-c-format msgid "Add the selected user to your contact list" msgstr "加入選擇的使用者到您的聯絡人清單" #: protocols/oscar/icq/ui/icqsearchbase.ui:98 #, no-c-format msgid "User Info" msgstr "使用者資訊" #: protocols/oscar/icq/ui/icqsearchbase.ui:104 #, no-c-format msgid "Show information about the selected contact" msgstr "顯示所選取聯絡人的資訊" #: protocols/oscar/icq/ui/icqsearchbase.ui:133 #, no-c-format msgid "UIN Search" msgstr "UIN 搜尋" #: protocols/oscar/icq/ui/icqsearchbase.ui:179 #, no-c-format msgid "ICQ Whitepages Search" msgstr "ICQ 白頁搜尋" #: protocols/oscar/icq/ui/icqsearchbase.ui:200 #, no-c-format msgid "&Last name:" msgstr "姓(&L):" #: protocols/oscar/icq/ui/icqsearchbase.ui:211 #, no-c-format msgid "&First name:" msgstr "名(&F):" #: protocols/oscar/icq/ui/icqsearchbase.ui:249 #, no-c-format msgid "Lan&guage:" msgstr "語言(&G):" #: protocols/oscar/icq/ui/icqsearchbase.ui:291 #, no-c-format msgid "&Gender:" msgstr "性別(&G):" #: protocols/oscar/icq/ui/icqsearchbase.ui:307 #, no-c-format msgid "Only search for online contacts" msgstr "只搜尋上線的聯絡人" #: protocols/oscar/icq/ui/icqsearchbase.ui:315 #, no-c-format msgid "C&ountry:" msgstr "國家(&O):" #: protocols/oscar/icq/ui/icqsearchbase.ui:372 #, no-c-format msgid "Nickname" msgstr "暱稱" #: protocols/oscar/icq/ui/icqsearchbase.ui:416 #, no-c-format msgid "Requires Authorization?" msgstr "需要認證嗎?" #: protocols/oscar/icq/ui/icqsearchbase.ui:432 #, no-c-format msgid "" "This is where the results from your search are displayed. If you double-" "click a result, the search window will close and pass the UIN of the contact " "you wish to add back to the Add Contact Wizard. You can only add one contact " "at a time." msgstr "" "這裡是您搜尋結果顯示的地方。如果您雙擊顯示結果,則搜尋視窗會關閉,並將您要新" "增的 UIN 傳送給新增聯絡人精靈。一次只能新增一個聯絡人。" #: protocols/oscar/icq/ui/icqsearchbase.ui:443 #, no-c-format msgid "Search the ICQ Whitepages with your search criteria" msgstr "依您設定的條件搜尋 ICQ 白頁" #: protocols/oscar/icq/ui/icqsearchbase.ui:454 #, no-c-format msgid "New Search" msgstr "新的搜尋" #: protocols/oscar/icq/ui/icqsearchbase.ui:457 #, no-c-format msgid "Clears both search fields and results" msgstr "清除搜尋欄位及結果" #: protocols/oscar/icq/ui/icqworkinfowidget.ui:24 #: protocols/yahoo/ui/yahooworkinfowidget.ui:24 #, no-c-format msgid "Personal Work Information" msgstr "個人工作資訊" #: protocols/oscar/icq/ui/icqworkinfowidget.ui:101 #: protocols/yahoo/ui/yahooworkinfowidget.ui:61 #, no-c-format msgid "Company Location Information" msgstr "公司位置資訊" #: protocols/oscar/icq/ui/icqworkinfowidget.ui:136 #: protocols/yahoo/ui/yahooworkinfowidget.ui:190 #, no-c-format msgid "Zip:" msgstr "郵遞區號:" #: protocols/oscar/oscarencodingselectionbase.ui:27 #, no-c-format msgid "Use this &encoding when chatting with this contact:" msgstr "與此聯絡人聊天時使用此編碼(&E):" #: protocols/oscar/oscarlistcontactsbase.ui:24 #, no-c-format msgid "" "The following contacts are not on your contact list. Would you like to add " "them?" msgstr "底下聯絡人不在您的清單中。您要加入他們嗎?" #: protocols/oscar/oscarlistcontactsbase.ui:43 #, no-c-format msgid "Do ¬ ask again" msgstr "不要再問我(&N)" #: protocols/oscar/oscarvisibilitybase.ui:24 #, no-c-format msgid "Always visible:" msgstr "永遠可見:" #: protocols/oscar/oscarvisibilitybase.ui:32 #, no-c-format msgid "Contacts:" msgstr "聯絡人:" #: protocols/oscar/oscarvisibilitybase.ui:155 #, no-c-format msgid "Always invisible:" msgstr "永遠不可見:" #: protocols/sms/services/gsmlibprefs.ui:49 #, no-c-format msgid "GSMLib Settings" msgstr "GSMLib 設定" #: protocols/sms/services/smsclientprefs.ui:49 #, no-c-format msgid "SMSClient Settings" msgstr "SMSClient 設定" #: protocols/sms/services/smsclientprefs.ui:79 #, no-c-format msgid "SMSClient &program:" msgstr "SMSClient 程式(&P):" #: protocols/sms/services/smsclientprefs.ui:90 #: protocols/sms/services/smssendprefs.ui:105 #, no-c-format msgid "Pro&vider:" msgstr "提供者(&V):" #: protocols/sms/services/smsclientprefs.ui:116 #, no-c-format msgid "SMSClient &config path:" msgstr "SMSClient 設定路徑(&C):" #: protocols/sms/services/smssendprefs.ui:49 #, no-c-format msgid "SMSSend Options" msgstr "SMSSend 選項" #: protocols/sms/services/smssendprefs.ui:124 #, no-c-format msgid "SMSSend prefi&x:" msgstr "SMSSend 前置(&X):" #: protocols/sms/services/smssendprefs.ui:159 #, no-c-format msgid "Provider Options" msgstr "提供者選項" #: protocols/sms/ui/smsactprefs.ui:25 #, no-c-format msgid "Account Preferences - SMS" msgstr "SMS 的帳號喜好設定" #: protocols/sms/ui/smsactprefs.ui:88 protocols/sms/ui/smsactprefs.ui:91 #: protocols/sms/ui/smsactprefs.ui:116 protocols/sms/ui/smsadd.ui:77 #: protocols/sms/ui/smsadd.ui:80 protocols/sms/ui/smsadd.ui:109 #: protocols/sms/ui/smsadd.ui:112 #, no-c-format msgid "A unique name for this SMS account." msgstr "此 SMS 帳號的唯一名稱。" #: protocols/sms/ui/smsactprefs.ui:99 #, no-c-format msgid "&SMS delivery service:" msgstr "SMS 傳送服務(&S):" #: protocols/sms/ui/smsactprefs.ui:105 protocols/sms/ui/smsactprefs.ui:140 #, no-c-format msgid "The delivery service that you would like to use." msgstr "您要使用的傳送服務。" #: protocols/sms/ui/smsactprefs.ui:108 protocols/sms/ui/smsactprefs.ui:143 #, no-c-format msgid "" "The delivery service that you would like to use. Note that you will need to " "have this software installed prior to using this account." msgstr "您要使用的傳送服務。注意,您必須要先安裝相關軟體才能使用此帳號。" #: protocols/sms/ui/smsactprefs.ui:151 #, no-c-format msgid "&Description" msgstr "說明(&D)" #: protocols/sms/ui/smsactprefs.ui:154 #, no-c-format msgid "Description of the SMS delivery service." msgstr "SMS 傳送服務的說明。" #: protocols/sms/ui/smsactprefs.ui:157 #, no-c-format msgid "Description of the SMS delivery service, including download locations." msgstr "SMS 傳送服務的說明,包括下載位置。" #: protocols/sms/ui/smsactprefs.ui:188 #, no-c-format msgid "To use SMS, you will need an account with a delivery service." msgstr "要使用 SMS,您必須先有傳送服務的帳號。" #: protocols/sms/ui/smsactprefs.ui:231 #, no-c-format msgid "Messaging Preferences" msgstr "訊息喜好設定" #: protocols/sms/ui/smsactprefs.ui:250 #, no-c-format msgid "If the message is too &long:" msgstr "訊息太長時(&L):" #: protocols/sms/ui/smsactprefs.ui:256 protocols/sms/ui/smsactprefs.ui:282 #, no-c-format msgid "" "What should happen if you type a message that is too long to fit in a single " "SMS message." msgstr "如果您輸入的訊息太長,無法放在一個 SMS 訊息中時要怎麼做。" #: protocols/sms/ui/smsactprefs.ui:259 protocols/sms/ui/smsactprefs.ui:285 #, no-c-format msgid "" "What should happen if you type a message that is too long to fit in a single " "SMS message. You can either choose to break it up into smaller messages " "automatically, cancel the message from being sent entirely, or have Kopete " "prompt you each time you enter a message that is too long." msgstr "" "如果您輸入的訊息太長,無法放在一個 SMS 訊息中時要怎麼做。您可以選擇要自動切成" "多筆小的訊息,取消該訊息,或是讓 Kopete 每次都提醒您。" #: protocols/sms/ui/smsactprefs.ui:265 #, no-c-format msgid "Prompt (recommended)" msgstr "提醒(建議使用)" #: protocols/sms/ui/smsactprefs.ui:270 #, no-c-format msgid "Break Into Multiple" msgstr "切成多筆發送" #: protocols/sms/ui/smsactprefs.ui:275 #, no-c-format msgid "Cancel Sending" msgstr "取消傳送" #: protocols/sms/ui/smsactprefs.ui:295 #, no-c-format msgid "&Enable phone number internationalization" msgstr "開啟電話號碼國際化(&E)" #: protocols/sms/ui/smsactprefs.ui:298 #, no-c-format msgid "Check if you would like to enable phone number internationalization." msgstr "勾選此選項以將電話號碼國際化。" #: protocols/sms/ui/smsactprefs.ui:301 #, no-c-format msgid "" "Check if you would like to enable phone number internationalization. " "Without this option, you will only be able to use SMS for accounts within " "your country." msgstr "" "勾選此選項以將電話號碼國際化。不選擇此選項的話,您只能對自己國家的帳號使用 " "SMS。" #: protocols/sms/ui/smsactprefs.ui:328 #, no-c-format msgid "Substitute leading &zero with code:" msgstr "將開頭的 0 替換為(&Z):" #: protocols/sms/ui/smsactprefs.ui:334 protocols/sms/ui/smsactprefs.ui:337 #: protocols/sms/ui/smsactprefs.ui:362 protocols/sms/ui/smsactprefs.ui:365 #, no-c-format msgid "What you would like to substitute a leading zero with." msgstr "您要將開頭的 0 替換為什麼。" #: protocols/sms/ui/smsactprefs.ui:356 #, no-c-format msgid "+" msgstr "+" #: protocols/sms/ui/smsactprefs.ui:359 #, no-c-format msgid "1234567890+" msgstr "1234567890+" #: protocols/sms/ui/smsadd.ui:60 protocols/sms/ui/smsadd.ui:98 #, no-c-format msgid "The telephone number of the contact you would like to add." msgstr "您要加入的聯絡人電話號碼。" #: protocols/sms/ui/smsadd.ui:63 protocols/sms/ui/smsadd.ui:101 #, no-c-format msgid "" "The telephone number of the contact you would like to add. This should be a " "number with SMS service available." msgstr "您要加入的聯絡人電話號碼。這應該是可使用 SMS 服務的號碼。" #: protocols/sms/ui/smsadd.ui:71 #, no-c-format msgid "Contact na&me:" msgstr "聯絡人名稱(&M):" #: protocols/sms/ui/smsuserprefs.ui:40 #, no-c-format msgid "Some One" msgstr "某人" #: protocols/sms/ui/smsuserprefs.ui:76 protocols/sms/ui/smsuserprefs.ui:87 #, no-c-format msgid "The telephone number of the contact." msgstr "聯絡人的電話號碼。" #: protocols/sms/ui/smsuserprefs.ui:79 protocols/sms/ui/smsuserprefs.ui:90 #, no-c-format msgid "" "The telephone number of the contact. This should be a number with SMS " "service available." msgstr "聯絡人的電話號碼。這應該是可以使用 SMS 服務的號碼。" #: protocols/winpopup/ui/wpaddcontactbase.ui:50 #, no-c-format msgid "Com&puter hostname:" msgstr "電腦主機名稱(&P):" #: protocols/winpopup/ui/wpaddcontactbase.ui:56 #: protocols/winpopup/ui/wpaddcontactbase.ui:59 #: protocols/winpopup/ui/wpaddcontactbase.ui:97 #: protocols/winpopup/ui/wpaddcontactbase.ui:100 #, no-c-format msgid "The hostname you would like to use to send WinPopup messages to." msgstr "您要送出 WinPopup 訊息所使用的主機名稱。" #: protocols/winpopup/ui/wpaddcontactbase.ui:67 #: protocols/winpopup/ui/wpuserinfowidget.ui:73 #, no-c-format msgid "&Workgroup/domain:" msgstr "工作群組/網域(&W):" #: protocols/winpopup/ui/wpaddcontactbase.ui:73 #: protocols/winpopup/ui/wpaddcontactbase.ui:76 #: protocols/winpopup/ui/wpaddcontactbase.ui:108 #: protocols/winpopup/ui/wpaddcontactbase.ui:111 #, no-c-format msgid "" "The workgroup or domain the computer is on that you would like to use to " "send WinPopup messages to." msgstr "您要送出 WinPopup 訊息所使用的主機所屬的工作群組或網域。" #: protocols/winpopup/ui/wpaddcontactbase.ui:151 #: protocols/winpopup/ui/wpaddcontactbase.ui:154 #, no-c-format msgid "" "Refresh the list of available workgroups & domains on the Windows network." msgstr "在 Windows 網路上刷新可用的工作群組或網域清單。" #: protocols/winpopup/ui/wpeditaccountbase.ui:16 #, no-c-format msgid "Account Preferences - WinPopup" msgstr "WinPopup 的帳號喜好設定" #: protocols/winpopup/ui/wpeditaccountbase.ui:48 #, no-c-format msgid "Basi&c Setup" msgstr "基本設定(&C)" #: protocols/winpopup/ui/wpeditaccountbase.ui:78 #, no-c-format msgid "Hos&tname:" msgstr "主機名稱(&T):" #: protocols/winpopup/ui/wpeditaccountbase.ui:84 #: protocols/winpopup/ui/wpeditaccountbase.ui:95 #, no-c-format msgid "The hostname you would like to use to send WinPopup messages as." msgstr "您要送出 WinPopup 訊息的主機名稱。" #: protocols/winpopup/ui/wpeditaccountbase.ui:87 #: protocols/winpopup/ui/wpeditaccountbase.ui:98 #, no-c-format msgid "" "The hostname you would like to use to send WinPopup messages as. Note that " "this does not have to be the actual hostname of the machine to send " "messages, but it does to receive them." msgstr "" "您要用於送出 WinPopup 訊息的主機名稱。注意,這不需要是您的真實主機名稱,但是" "如果您要接收對方傳來的訊息,最好設定為真實主機名稱。" #: protocols/winpopup/ui/wpeditaccountbase.ui:106 #, no-c-format msgid "I&nstall Into Samba" msgstr "安裝到 Samba(&N)" #: protocols/winpopup/ui/wpeditaccountbase.ui:109 #: protocols/winpopup/ui/wpeditaccountbase.ui:112 #, no-c-format msgid "Install support into Samba to enable this service." msgstr "安裝 Samba 的支援以開啟此服務。" #: protocols/winpopup/ui/wpeditaccountbase.ui:143 #, no-c-format msgid "" "To receive WinPopup messages sent from other machines, the hostname above " "must be set to this machine's hostname." msgstr "" "要接收其他機器送來的 WinPopup 訊息,主機名稱必須設定為此機器的主機名稱。" #: protocols/winpopup/ui/wpeditaccountbase.ui:154 #, no-c-format msgid "The samba server must be configured and running." msgstr "必須設定好並執行 Samba 伺服器。" #: protocols/winpopup/ui/wpeditaccountbase.ui:162 #, no-c-format msgid "" "\"Install into Samba\" is a simple method to create the directory for the " "temporary message files and configure your samba server.
\n" "However, the recommended way is to ask your administrator to create this " "directory ('mkdir -p -m 0777 /var/lib/winpopup') and add\n" "'message command = _PATH_TO_/winpopup-send.sh %s %m %t &' (substitute " "_PATH_TO_ by the real path) to your smb.conf [global]-section." msgstr "" "「安裝到 Samba」會建立一個暫時存放訊息檔案的目錄,並簡單設定您的 Samba 伺服" "器。
\n" "不過,比較好的方法還是請您的系統管理員建立此目錄('mkdir -p -m 0777 /var/lib/" "winpopup'),並在您的 smb.conf 中的 [global] 區塊中加入此指令:'message " "command = _PATH_TO_/winpopup-send.sh %s %m %t &'" #: protocols/winpopup/ui/wpeditaccountbase.ui:196 #, no-c-format msgid "S&ystem" msgstr "系統(&Y)" #: protocols/winpopup/ui/wpeditaccountbase.ui:235 #, no-c-format msgid "These options apply to all WinPopup accounts." msgstr "此選項會套用到所有 WinPopup 帳號。" #: protocols/winpopup/ui/wpeditaccountbase.ui:245 #, no-c-format msgid "Protocol Preferences" msgstr "通訊協定喜好設定" #: protocols/winpopup/ui/wpeditaccountbase.ui:256 #, no-c-format msgid "Host check frequency:" msgstr "主機檢查頻率:" #: protocols/winpopup/ui/wpeditaccountbase.ui:264 #, no-c-format msgid "Path to 'smbclient' executable:" msgstr "smbclient 執行路徑:" #: protocols/winpopup/ui/wpeditaccountbase.ui:315 #, no-c-format msgid "second(s)" msgstr "秒" #: protocols/winpopup/ui/wpuserinfowidget.ui:48 #, no-c-format msgid "&Computer name:" msgstr "電腦名稱(&C):" #: protocols/winpopup/ui/wpuserinfowidget.ui:54 #: protocols/winpopup/ui/wpuserinfowidget.ui:57 #: protocols/winpopup/ui/wpuserinfowidget.ui:137 #: protocols/winpopup/ui/wpuserinfowidget.ui:140 #, no-c-format msgid "The hostname of the computer for this contact." msgstr "此聯絡人的電腦主機名稱。" #: protocols/winpopup/ui/wpuserinfowidget.ui:65 #, no-c-format msgid "Comment:" msgstr "註解:" #: protocols/winpopup/ui/wpuserinfowidget.ui:79 #: protocols/winpopup/ui/wpuserinfowidget.ui:82 #: protocols/winpopup/ui/wpuserinfowidget.ui:165 #: protocols/winpopup/ui/wpuserinfowidget.ui:168 #, no-c-format msgid "The workgroup or domain the contact's computer is on." msgstr "此聯絡人電腦所屬的工作群組或網域。" #: protocols/winpopup/ui/wpuserinfowidget.ui:90 #, no-c-format msgid "Operating s&ystem:" msgstr "作業系統(&Y):" #: protocols/winpopup/ui/wpuserinfowidget.ui:96 #: protocols/winpopup/ui/wpuserinfowidget.ui:99 #: protocols/winpopup/ui/wpuserinfowidget.ui:179 #: protocols/winpopup/ui/wpuserinfowidget.ui:182 #, no-c-format msgid "The operating system the contact's computer is running." msgstr "此聯絡人電腦所執行的作業系統。" #: protocols/winpopup/ui/wpuserinfowidget.ui:107 #, no-c-format msgid "Ser&ver software:" msgstr "伺服器軟體(&V):" #: protocols/winpopup/ui/wpuserinfowidget.ui:113 #: protocols/winpopup/ui/wpuserinfowidget.ui:116 #: protocols/winpopup/ui/wpuserinfowidget.ui:193 #: protocols/winpopup/ui/wpuserinfowidget.ui:196 #, no-c-format msgid "The software the contact's computer is running." msgstr "此聯絡人電腦執行的軟體。" #: protocols/winpopup/ui/wpuserinfowidget.ui:151 #: protocols/winpopup/ui/wpuserinfowidget.ui:154 #, no-c-format msgid "The comment of the computer for this contact." msgstr "此聯絡人電腦的註解。" #: protocols/yahoo/ui/yahooadd.ui:16 #, no-c-format msgid "Add Yahoo Contact" msgstr "加入 Yahoo 聯絡人" #: protocols/yahoo/ui/yahooadd.ui:41 #: protocols/yahoo/ui/yahooeditaccountbase.ui:73 #, no-c-format msgid "&Yahoo username:" msgstr "Yahoo 使用者名稱(&Y):" #: protocols/yahoo/ui/yahooadd.ui:47 protocols/yahoo/ui/yahooadd.ui:58 #, no-c-format msgid "The account name of the Yahoo account you would like to add." msgstr "您要加入的 Yahoo 帳號名稱。" #: protocols/yahoo/ui/yahooadd.ui:50 protocols/yahoo/ui/yahooadd.ui:61 #, no-c-format msgid "" "The account name of the Yahoo account you would like to add. This should be " "in the form of an alphanumeric string (no spaces)." msgstr "您要加入的 Yahoo 帳號名稱。應該是字母與數字組成的字串(不含空白)。" #: protocols/yahoo/ui/yahooadd.ui:71 #, no-c-format msgid "(for example: joe8752)" msgstr "(例如:joe8752)" #: protocols/yahoo/ui/yahooeditaccountbase.ui:16 #, no-c-format msgid "Account Preferences - Yahoo" msgstr "Yahoo 的帳號喜好設定" #: protocols/yahoo/ui/yahooeditaccountbase.ui:79 #: protocols/yahoo/ui/yahooeditaccountbase.ui:90 #, no-c-format msgid "The account name of your Yahoo account." msgstr "您的 Yahoo 帳號的名稱。" #: protocols/yahoo/ui/yahooeditaccountbase.ui:82 #: protocols/yahoo/ui/yahooeditaccountbase.ui:93 #, no-c-format msgid "" "The account name of your Yahoo account. This should be in the form of an " "alphanumeric string (no spaces)." msgstr "您的 Yahoo 帳號的名稱。應該是字母與數字組成的字串(不含空白)。" #: protocols/yahoo/ui/yahooeditaccountbase.ui:114 #, no-c-format msgid "Exclude from &Global Identity" msgstr "從通用身分中排除(&G)" #: protocols/yahoo/ui/yahooeditaccountbase.ui:157 #, no-c-format msgid "" "To connect to the Yahoo network, you will need a Yahoo account.

If " "you do not currently have a Yahoo account, please click the button to create " "one." msgstr "" "要連線到 Yahoo 網路,您需要一個 Yahoo 帳號。

如果您沒有 Yahoo 帳號," "請按此鍵以建立。" #: protocols/yahoo/ui/yahooeditaccountbase.ui:171 #, no-c-format msgid "Register &New Account" msgstr "註冊新帳號(&N)" #: protocols/yahoo/ui/yahooeditaccountbase.ui:206 #, no-c-format msgid "Accoun&t Preferences" msgstr "帳號喜好設定(&T)" #: protocols/yahoo/ui/yahooeditaccountbase.ui:245 #, no-c-format msgid "O&verride default server information" msgstr "覆蓋預設伺服器資訊(&V)" #: protocols/yahoo/ui/yahooeditaccountbase.ui:273 #: protocols/yahoo/ui/yahooeditaccountbase.ui:290 #, no-c-format msgid "The IP address or hostmask of the Yahoo server you wish to connect to." msgstr "您要連線的 Yahoo 伺服器的 IP 位址或主機遮罩。" #: protocols/yahoo/ui/yahooeditaccountbase.ui:276 #: protocols/yahoo/ui/yahooeditaccountbase.ui:293 #, no-c-format msgid "" "The IP address or hostmask of the Yahoo server you wish to connect to. " "Normally you will want the default (scs.msg.yahoo.com)." msgstr "" "您要連線的 Yahoo 伺服器的 IP 位址或主機遮罩。通常使用預設值(scs.msg.yahoo." "com)即可。" #: protocols/yahoo/ui/yahooeditaccountbase.ui:287 #, no-c-format msgid "scs.msg.yahoo.com" msgstr "scs.msg.yahoo.com" #: protocols/yahoo/ui/yahooeditaccountbase.ui:310 #, no-c-format msgid "The port on the Yahoo server that you would like to connect to." msgstr "您要連線的 Yahoo 伺服器連接埠。" #: protocols/yahoo/ui/yahooeditaccountbase.ui:313 #: protocols/yahoo/ui/yahooeditaccountbase.ui:336 #, no-c-format msgid "" "The port on the Yahoo server that you would like to connect to. Normally " "this is 5050, but Yahoo also allows port 80 in case you are behind a " "firewall." msgstr "" "您要連線的 Yahoo 伺服器連接埠。通常是 5050,但若您在防火牆之後,Yahoo 也允許" "使用 80。" #: protocols/yahoo/ui/yahooeditaccountbase.ui:333 #, no-c-format msgid "The port on the Yahoo server that you would like to connect to." msgstr "您要連線的 Yahoo 伺服器連接埠。" #: protocols/yahoo/ui/yahooeditaccountbase.ui:348 #, no-c-format msgid "Buddy Icon" msgstr "好友圖示" #: protocols/yahoo/ui/yahooeditaccountbase.ui:364 #, no-c-format msgid "Select Picture..." msgstr "選擇圖片..." #: protocols/yahoo/ui/yahooeditaccountbase.ui:404 #, no-c-format msgid "Se&nd buddy icon to other users" msgstr "傳送好友圖示給其他使用者(&N)" #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:46 #, no-c-format msgid "Second name:" msgstr "第二名稱:" #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:119 #, no-c-format msgid "Yahoo ID:" msgstr "Yahoo ID:" #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:130 #, no-c-format msgid "Title:" msgstr "職稱:" #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:141 #, no-c-format msgid "Anniversary:" msgstr "週年紀念:" #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:233 #, no-c-format msgid "Contact Information" msgstr "聯絡人資訊" #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:244 #, no-c-format msgid "Pager:" msgstr "呼叫器:" #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:293 #, no-c-format msgid "Email &3:" msgstr "電子郵件地址 3(&3):" #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:304 #, no-c-format msgid "Email &2:" msgstr "電子郵件地址 2(&2):" #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:382 #, no-c-format msgid "Additional:" msgstr "額外屬性:" #: protocols/yahoo/ui/yahoogeneralinfowidget.ui:476 #, no-c-format msgid "Location Information" msgstr "位置資訊" #: protocols/yahoo/ui/yahooinvitelistbase.ui:16 #, no-c-format msgid "Invite Friends to Conference" msgstr "邀請朋友到會議中" #: protocols/yahoo/ui/yahooinvitelistbase.ui:35 #, no-c-format msgid "Conference Members" msgstr "會議成員" #: protocols/yahoo/ui/yahooinvitelistbase.ui:54 #, no-c-format msgid "Friend List" msgstr "朋友清單" #: protocols/yahoo/ui/yahooinvitelistbase.ui:60 #: protocols/yahoo/ui/yahooinvitelistbase.ui:94 #, no-c-format msgid "New Item" msgstr "新項目" #: protocols/yahoo/ui/yahooinvitelistbase.ui:88 #, no-c-format msgid "Chat Invitation List" msgstr "聊天邀請清單" #: protocols/yahoo/ui/yahooinvitelistbase.ui:162 #, no-c-format msgid "Add >>" msgstr "新增 >>" #: protocols/yahoo/ui/yahooinvitelistbase.ui:170 #, no-c-format msgid "<< Remove" msgstr "<< 移除" #: protocols/yahoo/ui/yahooinvitelistbase.ui:207 #, no-c-format msgid "Invitation Message" msgstr "邀請訊息" #: protocols/yahoo/ui/yahooinvitelistbase.ui:288 #, no-c-format msgid "Invite" msgstr "邀請" #: protocols/yahoo/ui/yahoootherinfowidget.ui:24 #, no-c-format msgid "Contact comments:" msgstr "聯絡人備註:" #: protocols/yahoo/ui/yahoootherinfowidget.ui:40 #, no-c-format msgid "Note 1:" msgstr "備忘 1:" #: protocols/yahoo/ui/yahoootherinfowidget.ui:56 #, no-c-format msgid "Note 2:" msgstr "備忘 2:" #: protocols/yahoo/ui/yahoootherinfowidget.ui:80 #, no-c-format msgid "Note 3:" msgstr "備忘 3:" #: protocols/yahoo/ui/yahoootherinfowidget.ui:96 #, no-c-format msgid "Note 4:" msgstr "備忘 4:" #: protocols/yahoo/ui/yahoostealthsetting.ui:30 #, no-c-format msgid "Show Me As" msgstr "將我顯示為" #: protocols/yahoo/ui/yahoostealthsetting.ui:45 #, no-c-format msgid "Perma&nently offline" msgstr "永遠離線(&N)" #: protocols/yahoo/ui/yahoostealthsetting.ui:83 #, no-c-format msgid "Off&line" msgstr "離線(&L)" #: protocols/yahoo/ui/yahooverifyaccountbase.ui:30 #, no-c-format msgid "" "Your Account has to be verified because of too many false login attempts.
" msgstr "必須檢查您的帳號,因為有太多登入失敗的紀錄。
" #: protocols/yahoo/ui/yahooverifyaccountbase.ui:46 #, no-c-format msgid "Please enter the chars shown in the picture:" msgstr "請輸入相片中顯示的角色:" #, fuzzy #~ msgid "Top" #~ msgstr "主題" #, fuzzy #~ msgid "Export" #~ msgstr "運動" #, fuzzy #~ msgid "Add" #~ msgstr "加入(&A)" #, fuzzy #~ msgid "Remove" #~ msgstr "移除(&V)" #, fuzzy #~ msgid "Warning" #~ msgstr "警告" #, fuzzy #~ msgid "Error" #~ msgstr "錯誤" #, fuzzy #~ msgid "Properties" #~ msgstr "屬性(&P)" #, fuzzy #~ msgid "Delete" #~ msgstr "刪除(&E)" #, fuzzy #~ msgid "Options" #~ msgstr "選項(&N)" #, fuzzy #~ msgid "&Cancel" #~ msgstr "進階(&V)" #, fuzzy #~ msgid "&Close" #~ msgstr "關閉(&E)" #, fuzzy #~ msgid "No" #~ msgstr "無" #, fuzzy #~ msgid "Default" #~ msgstr "預設:3185" #, fuzzy #~ msgid "&Settings" #~ msgstr "MSN 設定(&S)" #, fuzzy #~ msgid "Main Toolbar" #~ msgstr "格式工具列" #, fuzzy #~ msgid "&Remove" #~ msgstr "移除(&V)" #, fuzzy #~ msgid "&Delete" #~ msgstr "刪除(&E)" #, fuzzy #~ msgid "&Edit" #~ msgstr "編輯(&E)..." #, fuzzy #~ msgid "Clear" #~ msgstr "清除(&L)" #, fuzzy #~ msgid "&Save" #~ msgstr "另存到:" #, fuzzy #~ msgid "Information" #~ msgstr "工作資訊" #, fuzzy #~ msgid "Cancel" #~ msgstr "取消傳送" #~ msgid "AIM" #~ msgstr "AIM" #~ msgid "User Information on %1" #~ msgstr "%1 的使用者資訊" #~ msgid "&Save Profile" #~ msgstr "儲存設定檔(&S)" #~ msgid "Requesting User Profile, please wait..." #~ msgstr "要求使用者設定檔中。請稍候..." #~ msgid "No user information provided" #~ msgstr "沒有提供使用者資訊" #~ msgid "Do you want to add '%1' to your contact list?" #~ msgstr "您想要加入「%1」到您的聯絡人清單嗎?" #~ msgid "" #~ "Unable to connect to the chat room %1 because the account for %2 is not " #~ "connected." #~ msgstr "%2 的帳號尚未連線,因此無法連線到聊天室 %1。" #~ msgid "Mobile" #~ msgstr "行動" #~ msgid "Mobile Away" #~ msgstr "行動離開" #~ msgid "User Profile" #~ msgstr "使用者檔案" #~ msgid "Connect to the AIM network and try again." #~ msgstr "連線到 AIM 網路然後再試一次。" #~ msgid "No Screen Name" #~ msgstr "沒有螢幕名稱" #~ msgid "Join AIM Chat Room" #~ msgstr "加入 AIM 聊天室" #~ msgid "Join" #~ msgstr "加入" #~ msgid "&Warn User" #~ msgstr "警告使用者(&W)" #~ msgid "" #~ "Would you like to warn %1 anonymously or with your name?
(Warning " #~ "a user on AIM will result in a \"Warning Level\" increasing for the user " #~ "you warn. Once this level has reached a certain point, they will not be " #~ "able to sign on. Please do not abuse this function, it is meant for " #~ "legitimate practices.)
" #~ msgstr "" #~ "您要匿名警告 %1,還是要附上您的名稱?
(在 AIM 上警告使用者,會讓" #~ "該使用者的「警告等級」提升。一旦警告等級提升到一個程度,他們將無法再登入。" #~ "請不要濫用此功能。)
" #~ msgid "Warn User %1?" #~ msgstr "要警告使用者 %1 嗎?" #~ msgid "Warn Anonymously" #~ msgstr "匿名警告" #~ msgid "" #~ "Visit the Kopete website at http://" #~ "trinitydesktop.org" #~ msgstr "" #~ "請參考 Kopete 網站 http://kopete." #~ "kde.org" #~ msgid "Join Chat..." #~ msgstr "加入聊天..." #~ msgid "" #~ "Editing your user info is not possible because you are not connected." #~ msgstr "您尚未連線,所以無法編輯您的使用者資訊。" #~ msgid "Unable to edit user info" #~ msgstr "無法編輯使用者資訊" #~ msgid "" #~ "Joining an AIM chat room is not possible because you are not connected." #~ msgstr "您尚未連線,所以無法加入 AIM 聊天室。" #~ msgid "Unable to Join AIM Chat Room" #~ msgstr "無法加入 AIM 聊天室" #~ msgid "" #~ "_: AIM user id\n" #~ "screen name" #~ msgstr "螢幕名稱" #~ msgid "Mobile AIM Client" #~ msgstr "Mobile AIM 客戶端" #~ msgid "AIM screen name:" #~ msgstr "AIM 螢幕名稱:" #~ msgid "Please enter the name of the chat room you wish to join." #~ msgstr "請輸入您要加入的聊天室名稱。" #~ msgid "Room &name:" #~ msgstr "聊天室名稱(&N):" #~ msgid "E&xchange:" #~ msgstr "Exchange(&X):" #~ msgid "Account Preferences - AIM" #~ msgstr "帳號喜好設定 - AIM" #~ msgid "AIM &screen name:" #~ msgstr "AIM 螢幕名稱(&S):" #~ msgid "The screen name of your AIM account." #~ msgstr "您的 AIM 帳號的螢幕名稱。" #~ msgid "" #~ "The screen name of your AIM account. This should be in the form of an " #~ "alphanumeric string (spaces allowed, not case sensitive)." #~ msgstr "" #~ "您的 AIM 帳號的螢幕名稱。這應該是一串由字母與數字組成的字串(允許空白,不" #~ "分大小寫)。" #~ msgid "" #~ "To connect to the AOL Instant Messaging network, you will need to use a " #~ "screen name from AIM, AOL, or .Mac.

If you do not currently have " #~ "an AIM screen name, please click the button to create one." #~ msgstr "" #~ "要連接到 AOL 即時通訊(AIM)網路,您必須使用從AIM、AOL 或 .Mac 的螢幕名" #~ "稱。

如果您目前沒有 AIM 螢幕名稱,請按此鍵以建立。" #~ msgid "The IP address or hostmask of the AIM server you wish to connect to." #~ msgstr "您要連接的 AIM 伺服器的 IP 位址或主機遮罩。" #~ msgid "" #~ "The IP address or hostmask of the AIM server you wish to connect to. " #~ "Normally you will want the default (login.oscar.aol.com)." #~ msgstr "" #~ "您要連接的 AIM 伺服器的 IP 位址或主機遮罩。通常您只需要使用預設主機" #~ "(login.oscar.aol.com)。" #~ msgid "login.oscar.aol.com" #~ msgstr "login.oscar.aol.com" #~ msgid "The port on the AIM server that you would like to connect to." #~ msgstr "您要連接到 AIM 伺服器使用的連接埠。" #~ msgid "" #~ "The port on the AIM server that you would like to connect to. Normally " #~ "this is 5190." #~ msgstr "您要連接到 AIM 伺服器使用的連接埠。通常是 5190。" #~ msgid "Visibility settings" #~ msgstr "可見清單設定" #~ msgid "Allow only from visible list" #~ msgstr "只允許可見清單中的使用者" #~ msgid "Block all users" #~ msgstr "封鎖所有使用者" #~ msgid "Block AIM users" #~ msgstr "封鎖 AIM 使用者" #~ msgid "Block only from invisible list" #~ msgstr "只封鎖不可見清單中的使用者" #~ msgid "Allow all users" #~ msgstr "允許所有使用者" #~ msgid "Allow only contact list's users" #~ msgstr "只允許聯絡人清單中的使用者" #~ msgid "Screen name:" #~ msgstr "螢幕名稱:" #~ msgid "Idle minutes:" #~ msgstr "閒置分鐘數:" #~ msgid "Profile:" #~ msgstr "設定檔:" #~ msgid "" #~ "The NetMeeting Plugin allows you to start a video or voice chat with your " #~ "MSN Messenger contacts.\n" #~ "\n" #~ "This is not the same as webcam chat you can find in the newer Windows " #~ "Messenger®, but uses the older NetMeeting chat you can find in old " #~ "versions." #~ msgstr "" #~ "NetMeeting 外掛程式讓您可以啟動 MSN 上的影音聊天。\n" #~ "\n" #~ "這跟您在新版的 Windows Messenger®上看到的視訊聊天方式不太一樣,而是使用舊" #~ "式的 NetMeeting 聊天。" #~ msgid "Application to launch:" #~ msgstr "執行的程式:" #~ msgid "ekiga -c callto://%1" #~ msgstr "ekiga -c callto://%1" #~ msgid "konference callto://%1" #~ msgstr "konference callto://%1" #~ msgid "%1 will be replaced by the ip to call" #~ msgstr "%1 會換成要呼叫的 IP。" #~ msgid "" #~ "You can download Konference here: http://www.kde-apps.org/content/show.php?" #~ "content=10395" #~ msgstr "" #~ "您可以在這裡下載 Konference:http://www.kde-apps.org/content/show.php?" #~ "content=10395" #~ msgid "&Parameters:" #~ msgstr "引數(&P):" #~ msgid "Co&mmand:" #~ msgstr "命令(&M):" #~ msgid "Add &ID" #~ msgstr "新增 ID(&I)" #~ msgid "Add &new line" #~ msgstr "增加新的一行(&N)" #~ msgid "Message:" #~ msgstr "訊息:" #~ msgid "&MSN Passport ID:" #~ msgstr "MSN Passport 代號(&M):" #~ msgid "The user ID of the MSN contact you would like to add." #~ msgstr "您想加入的 MSN 聯絡人的使用者代號。" #~ msgid "" #~ "The user ID of the MSN contact you would like to add. This should be in " #~ "the form of a valid E-mail address." #~ msgstr "您要加入的 MSN 聯絡人使用者代號。通常是一個合法的電子郵件地址。" #~ msgid "(for example: joe@hotmail.com)" #~ msgstr "(例如:joe@hotmail.com)" #~ msgid "Account Preferences - MSN" #~ msgstr "MSN 的帳號喜好設定" #~ msgid "" #~ "To connect to the Microsoft network, you will need a Microsoft Passport." #~ "

If you do not currently have a Passport, please click the button " #~ "to create one." #~ msgstr "" #~ "要連線到 Microsoft 網路,您需要一個 Microsoft Passport。

如果您還沒" #~ "有 Passport,請按一下按鈕來建立。" #~ msgid "The user ID of the MSN contact you would like to use." #~ msgstr "您想使用的 MSN 聯絡人的使用者代號。" #~ msgid "" #~ "The user ID of the MSN contact you would like to use. This should be in " #~ "the form of a valid E-mail address." #~ msgstr "您想使用的 MSN 聯絡人的使用者代號。通常是一個合法的電子郵件地址。" #~ msgid "" #~ "If you check this checkbox, the account will not be connected when you " #~ "press the \"Connect All\" button, or at startup when automatic connection " #~ "at startup is enabled." #~ msgstr "" #~ "勾選此選項,則在您按下「全部連線」,或是程式剛啟動時,這個帳號不會被連線," #~ "即使您設定啟動時自動連線也一樣。" #~ msgid "Note: These settings are applicable to all MSN accounts" #~ msgstr "注意: 所有 MSN 帳號共用這些設定" #~ msgid "Global MSN Options" #~ msgstr "全域 MSN 選項" #~ msgid "Au&tomatically open a chat window when someone starts a conversation" #~ msgstr "有人開啟對話時,自動開啟聊天視窗(&T)" #~ msgid "" #~ "This option will notify you when a contact starts typing their message, " #~ "before the message is sent or finished." #~ msgstr "" #~ "當有人開始鍵入訊息時,本選項會在訊息送出或完成之前就通知您(即:抓別人開您" #~ "視窗的功能)。" #~ msgid "Download the msn picture:" #~ msgstr "下載 MSN 圖片:" #~ msgid "" #~ "

Indicate when Kopete will download the display pictures of " #~ "contacts

\n" #~ "
Only manually
The picture is not downloaded " #~ "automatically. It is only downloaded when the user requests it
\n" #~ "
When a chat is open
The picture is downloaded when a " #~ "conversation socket is opened, i.e. when you open a chat window
\n" #~ "
Automatically
Always try to download the picture if the " #~ "contact has one. Note: this will open a socket, and let the user " #~ "know you are downloading their picture.
" #~ msgstr "" #~ "

指示 Kopete 何時下載此聯絡人的圖片。

\n" #~ "
手動
不會自動下載圖片。只有在使用者要求時下載。
\n" #~ "
聊天視窗開啟時
當開啟聊天對話時下載圖片。
\n" #~ "
自動
聯絡人有設定顯示圖片就下載。注意:這會建立一個 " #~ "socket,並讓使用者知道您正在下載他們的圖片。
" #~ msgid "Only Manually" #~ msgstr "手動" #~ msgid "When a Chat is Open" #~ msgstr "聊天視窗開啟時" #~ msgid "Automatically" #~ msgstr "自動" #~ msgid "" #~ "

Indicate when Kopete will download the pictures of contacts

\n" #~ "
Only manually
The picture is not downloaded " #~ "automatically. It is only downloaded when the user requests it
\n" #~ "
When a chat is open
The picture is downloaded when a " #~ "conversation socket is opened, i.e. when you open a chat window
\n" #~ "
Automatically
Always try to download the picture if the " #~ "contact has one. Note: this will open a socket, and let the user " #~ "know you are downloading their picture.
" #~ msgstr "" #~ "

指示 Kopete 何時下載此聯絡人的圖片。

\n" #~ "
手動
不會自動下載圖片。只有在使用者要求時下載。
\n" #~ "
聊天視窗開啟時
當開啟聊天對話時下載圖片。
\n" #~ "
自動
聯絡人有設定顯示圖片就下載。注意:這會建立一個 " #~ "socket,並讓使用者知道您正在下載他們的圖片。
" #~ msgid "&Download and show custom emoticons" #~ msgstr "下載並顯示自訂表情圖示(&D)" #~ msgid "" #~ "MSN Messenger allows users to download and use custom emoticons. If this " #~ "option is enabled, Kopete will download these emoticons and show them." #~ msgstr "" #~ "MSN 允許使用者下載並使用自訂的表情圖示。如果開啟此選項,則 Kopete 會下載這" #~ "些表情圖示並顯示。" #~ msgid "E&xport the current emoticon theme to users" #~ msgstr "匯出目前的表情圖示主題給使用者(&X)" #~ msgid "Only work with emoticons in the PNG format" #~ msgstr "只對 PNG 格式的表情圖示有效" #~ msgid "" #~ "Export all the emoticon themes as custom emoticons.\n" #~ "Only works for emoticons in the PNG format." #~ msgstr "" #~ "將全部的表情圖示主題匯出成自定的表情圖示。只對 PNG 格式的表情圖示有效。" #~ msgid "Privacy" #~ msgstr "隱私" #~ msgid "Send client information" #~ msgstr "傳送客戶端資訊" #~ msgid "" #~ "Make it possible for your contacts to detect if you are using Kopete." #~ "
We recommend leaving this checked.
" #~ msgstr "" #~ "讓您的聯絡人能偵測到您正在使用 Kopete。
我們建議您勾選此選項。" #~ msgid "" #~ "Third party MSN clients, such as Kopete, give users the ability to let " #~ "other third party clients guess which client they are using. We recommend " #~ "leaving this checkbox checked." #~ msgstr "" #~ "非官方 MSN 客戶端,像是 Kopete,賦與使用者讓其他客戶端猜測所使用的客戶端的" #~ "能力。我們建議您勾選此選項。" #~ msgid "Send &typing notifications" #~ msgstr "送出輸入通知(&T)" #~ msgid "" #~ "Check this box to send Typing notifications to your contacts. " #~ "When you are composing a message, you might want your contact to know " #~ "that you are typing so that he knows you are answering." #~ msgstr "" #~ "勾選此選項,以送出輸入通知給聯絡人。當您正輸入訊息時,對方可以" #~ "知道您正在打字與回覆中。" #~ msgid "Expose my Jabber account to Jabber users" #~ msgstr "將我的 Jabber 帳號公開給 Jabber 使用者" #~ msgid "" #~ "If you have a Jabber account, you may let Jabber users on an MSN gateway " #~ "know that you are also using Jabber." #~ msgstr "" #~ "如果您有 Jabber 帳號,您可以讓在 MSN 閘道的 Jabber 使用者,知道您也使用 " #~ "Jabber。" #~ msgid "There are also privacy options in the \"Contacts\" tab" #~ msgstr "在「聯絡人」頁面中也有一些隱私選項。" #~ msgid "" #~ "The alias you would like to use on MSN. You may change this at any time " #~ "you wish." #~ msgstr "您在 MSN 上的別名。您可以在任何時候變更它。" #~ msgid "Phone Numbers" #~ msgstr "電話號碼" #~ msgid "Hom&e:" #~ msgstr "住家(&E):" #~ msgid "&Work:" #~ msgstr "工作(&W):" #~ msgid "&Mobile:" #~ msgstr "行動(&M):" #~ msgid "Display Picture" #~ msgstr "顯示圖片" #~ msgid "E&xport a display picture" #~ msgstr "匯出顯示圖片(&X)" #~ msgid "Please select a square image. The image will be scaled to 96x96." #~ msgstr "請選擇一個方型影像。它會被縮放成 96x96" #~ msgid "&Select Image..." #~ msgstr "選擇影像(&S)..." #~ msgid "WARNING: You need to be connected to modify this page." #~ msgstr "警告:您需要連線才可修改本頁。" #~ msgid "Con&tacts" #~ msgstr "聯絡人(&T)" #~ msgid "" #~ "Italics contacts are not on your contact list.
\n" #~ "
\n" #~ "Bold contacts are in your contact list but you are not in their " #~ "contact list." #~ msgstr "" #~ "以斜體表示的聯絡人,代表沒在您的聯絡人清單中。
\n" #~ "
\n" #~ "以粗體表示的聯絡人,代表他們在您的聯絡人清單中,但您不在他們的聯絡" #~ "人清單中。" #~ msgid "Bloc&ked contacts:" #~ msgstr "封鎖的聯絡人(&K):" #~ msgid "&>" #~ msgstr "&>" #~ msgid "&<" #~ msgstr "&<" #~ msgid "Allo&wed contacts:" #~ msgstr "允許的聯絡人(&W):" #~ msgid "Block all users not in 'Allowed' &list" #~ msgstr "封鎖所有沒在允許清單中的聯絡人(&L)" #~ msgid "" #~ "Checking this box will block all users not explicitly shown in the " #~ "allowed list here, including any contacts not on your contact list." #~ msgstr "" #~ "勾選這個方塊會封鎖所有沒在允許清單中的使用者,包含沒在您的聯絡人清單上的聯" #~ "絡人。" #~ msgid "View &Reverse List" #~ msgstr "檢視反向清單(&R)" #~ msgid "" #~ "The reverse list is the list of contacts who added you to their own " #~ "contact list." #~ msgstr "反向清單是指將您列入他們聯絡人清單中的聯絡人。" #~ msgid "WARNING: You need to be connected to modify this page" #~ msgstr "警告:您需要連線才可以修改本頁。" #~ msgid "Connection Preferences (for advanced users)" #~ msgstr "連線喜好設定(給進階使用者)" #~ msgid "messenger.hotmail.com" #~ msgstr "messenger.hotmail.com" #~ msgid "" #~ "Only modify these values if you want to use a special IM proxy server, " #~ "like SIMP" #~ msgstr "除非您要使用特別的代理伺服器,如 SIMP,才需要修改這些設定。" #~ msgid "Use &HTTP method" #~ msgstr "使用 HTTP 方式連線(&H)" #~ msgid "" #~ "Connect to MSN Messenger using an HTTP-like protocol on port 80.\n" #~ "This may be used to connect on a network with a restrictive firewall.\n" #~ "Only check this option if the normal connection doesn't work." #~ msgstr "" #~ "透過連接埠 80,以類似 HTTP 的通訊協定來連線到 MSN Messenger。\n" #~ "在受到防火牆限制的網路中,可用來連線。只有在無法正常連線時,才勾選此選項。" #~ msgid "S&pecify a base port for incoming webcam connections:" #~ msgstr "指定接收視訊連線的基底連接埠(&P):" #~ msgid "" #~ "If you are behind a firewall, you may specify a base port to use for the " #~ "incoming connection, and configure your firewall to accept connections on " #~ "a range of 10 ports, starting at this one. Incoming connections are used " #~ "for the webcam. If you don't specify a port yourself, the operating " #~ "system will choose an available port for you. It is recommended to leave " #~ "the checkbox unchecked." #~ msgstr "" #~ "如果您在防火牆後面,您可以指定要接收連線的連接埠,並將您的防火牆設定為接受" #~ "此連接埠的連線。這個連線用在視訊。如果您未指定連接埠,系統會自己選擇可用的" #~ "連接埠。建議您不要勾選此選項。" #~ msgid "Email address:" #~ msgstr "電子郵件地址:" #~ msgid "Personal message:" #~ msgstr "個人化訊息:" #~ msgid "Phones" #~ msgstr "電話" #~ msgid "Mobile:" #~ msgstr "行動:" #~ msgid "I am on &the contact list of this contact" #~ msgstr "我在這個聯絡人的聯絡人清單上(&T)" #~ msgid "Show whether you are on the contact list of this user" #~ msgstr "顯示您是否在這位使用者的聯絡人清單中。" #~ msgid "" #~ "If this box is checked, you are on this user's contact list.\n" #~ "If not, the user has not added you to their list, or has removed you." #~ msgstr "" #~ "如果它被勾選,您在此使用者的聯絡人清單上。\n" #~ "如果不是,就是對方沒有加您,或已經移除了。" #~ msgid "&Debug" #~ msgstr "偵錯(&D)" #~ msgid "&Automatically open a chat window when someone starts a conversation" #~ msgstr "有人開始會話時就自動開啟聊天視窗(&A)" #~ msgid "&Automatically download the display picture if possible" #~ msgstr "如果可行的話就自動下載顯示圖片(&A)" #~ msgid "Download and show custom emoticons (experimental)" #~ msgstr "下載並顯示自訂表情圖示 (實驗性質)" #~ msgid "Away Messages" #~ msgstr "離開訊息" #~ msgid "Send &away messages" #~ msgstr "傳送離開訊息(&A)" #~ msgid "Do not send more than one away message every" #~ msgstr "在多久內不要傳送一個以上離開訊息:" #~ msgid "seconds" #~ msgstr "秒" #~ msgid "NetMeeting" #~ msgstr "NetMeeting" #~ msgid "Invite to Use NetMeeting" #~ msgstr "邀請使用 NetMeeting" #~ msgid "%1 wants to start a chat with NetMeeting; do you want to accept it? " #~ msgstr "%1 想要啟動 NetMeeting 聊天,您要接受嗎?" #~ msgid "MSN Plugin" #~ msgstr "MSN 外掛程式" #~ msgid "Refuse" #~ msgstr "拒絕" #~ msgid "" #~ "An error occurred when trying to change the display picture.
Make " #~ "sure that you have selected a correct image file
" #~ msgstr "改變顯示圖片時發生錯誤。
請確定您選擇了正確的圖片檔。
" #~ msgid "You must enter a valid email address." #~ msgstr "您必須要輸入有效的電子郵件地址。" #~ msgid "" #~ "Here you can see a list of contacts who added you to their contact list" #~ msgstr "您可以在此看到將您加入聯絡人清單的聯絡人。" #~ msgid "Reverse List - MSN Plugin" #~ msgstr "MSN 外掛程式 - 反向清單" #~ msgid "MSN Display Picture" #~ msgstr "MSN 顯示圖片" #~ msgid "Downloading of display image failed" #~ msgstr "下載顯示圖片時失敗" #~ msgid "" #~ "The contact %1 wants to see your webcam, do you want them to " #~ "see it?" #~ msgstr "聯絡人 %1 想看您的視訊影像。您要讓他們看嗎?" #~ msgid "" #~ "The contact %1 wants to show you his/her webcam, do you want to see it?" #~ msgstr "聯絡人 %1 想要讓您看他們的視訊影像。您要看嗎?" #~ msgid "Webcam invitation - Kopete MSN Plugin" #~ msgstr "Kopete MSN 外掛程式 - 邀請視訊" #~ msgid "Decline" #~ msgstr "婉拒" #~ msgid "File Transfer - MSN Plugin" #~ msgstr "MSN 外掛程式 - 檔案傳輸" #~ msgid "An unknown error occurred" #~ msgstr "發生未知的錯誤" #~ msgid "Connection timed out" #~ msgstr "連線逾時" #~ msgid "The remote user aborted" #~ msgstr "對方取消了" #~ msgid "Cannot open file for writing" #~ msgstr "無法開啟檔案以寫入" #~ msgid "File transfer canceled." #~ msgstr "檔案傳輸已取消。" #~ msgid "MSN Messenger" #~ msgstr "MSN Messenger" #~ msgid "Be Right Back" #~ msgstr "馬上回來" #~ msgid "Be &Right Back" #~ msgstr "馬上回來(&R)" #~ msgid "Away From Computer" #~ msgstr "不在電腦前" #~ msgid "On the Phone" #~ msgstr "電話中" #~ msgid "On The &Phone" #~ msgstr "電話中(&P)" #~ msgid "Out to Lunch" #~ msgstr "外出用餐" #~ msgid "Out To &Lunch" #~ msgstr "外出用餐(&L)" #~ msgid "&Offline" #~ msgstr "離線(&O)" #~ msgid "&Idle" #~ msgstr "閒置(&I)" #~ msgid "Remote Client" #~ msgstr "遠端客戶端" #~ msgid "Contact GUID" #~ msgstr "聯絡人 GUID" #~ msgid "" #~ "Invalid user:\n" #~ "this MSN user does not exist; please check the MSN ID." #~ msgstr "" #~ "不合法的使用者:\n" #~ "此 MSN 使用者不存在。請檢查 MSN 使用者代號。" #~ msgid "user never joined" #~ msgstr "使用者從未加入" #~ msgid "The user %1 is already in this chat." #~ msgstr "使用者 %1 已加入。" #~ msgid "" #~ "The user %1 is online but has blocked you:\n" #~ "you can not talk to this user." #~ msgstr "" #~ "使用者 %1 在現上,但是已經將您封鎖。\n" #~ "您無法與他交談。" #~ msgid "user blocked you" #~ msgstr "使用者已將您封鎖" #~ msgid "" #~ "The user %1 is currently not signed in.\n" #~ "Messages will not be delivered." #~ msgstr "" #~ "使用者 %1 目前不在線上。\n" #~ "訊息無法送達。" #~ msgid "user disconnected" #~ msgstr "使用者已離線" #~ msgid "" #~ "You are trying to invite too many contacts to this chat at the same time" #~ msgstr "您同時邀請太多聯絡人加入此聊天室。" #~ msgid "" #~ "Kopete MSN plugin has trouble authenticating with switchboard server." #~ msgstr "Kopete 的 MSN 外掛程式與 switchboard 伺服器認證時失敗。" #~ msgid "timeout" #~ msgstr "逾時" #~ msgid "" #~ "The message you are trying to send is too long; it will be split into %1 " #~ "messages." #~ msgstr "您試圖送出的訊息太長了。它會被切割為 %1 個訊息。" #~ msgid "Message too big - MSN Plugin" #~ msgstr "MSN 外掛程式 - 訊息過大" #~ msgid "connection closed" #~ msgstr "連線關閉" #~ msgid "\"Typewrited" #~ msgstr "\"打字訊息\"" #~ msgid "" #~ "The MSN user '%1' does not exist.
Please check the MSN ID.
" #~ msgstr "MSN 使用者 %1 不存在。
請檢查 MSN 代號。
" #~ msgid "" #~ "An internal error occurred in the MSN plugin.
MSN Error: " #~ "%1
please send us a detailed bug report at kopete-devel@kde.org " #~ "containing the raw debug output on the console (in gzipped format, as it " #~ "is probably a lot of output.)" #~ msgstr "" #~ "MSN 外掛程式發生內部錯誤。
MSN 錯誤:%1
請將詳細的錯誤報告送到 " #~ "kopete-devel@kde.org。報告內容請包含 console 中原始的除錯輸出(若訊息很" #~ "多,請以 gzip 格式傳送)。" #~ msgid "" #~ "Unable to change your display name.\n" #~ "Please ensure your display is not too long and does not contains censored " #~ "words." #~ msgstr "" #~ "無法改變您的顯示名稱。\n" #~ "請確認您的顯示名稱不會太長,並且沒有包含不良字眼。" #~ msgid "Your contact list is full; you cannot add any new contacts." #~ msgstr "您的聯絡人清單已滿;無法再加入新的聯絡人。" #~ msgid "" #~ "The user '%1' already exists in this group on the MSN server;
if " #~ "Kopete does not show the user, please send us a detailed bug report at " #~ "kopete-devel@kde.org containing the raw debug output on the console (in " #~ "gzipped format, as it is probably a lot of output.)
" #~ msgstr "" #~ "使用者 %1 以存在於 MSN 伺服器上的此群組。
如果 Kopete 未顯示此使用" #~ "者,請將詳細的錯誤報告送到 kopete-devel@kde.org。報告內容請包含 console 中" #~ "原始的除錯輸出(若訊息很多,請以 gzip 格式傳送)。
" #~ msgid "The user '%1' seems to already be blocked or allowed on the server." #~ msgstr "使用者 %1 似乎已經在此伺服器上被封鎖或被允許了。" #~ msgid "" #~ "You have reached the maximum number of groups:\n" #~ "MSN does not support more than 30 groups." #~ msgstr "" #~ "您已經到達群組數量的上限了:\n" #~ "MSN不支援超過三十個群組。" #~ msgid "" #~ "Kopete is trying to perform an operation on a group or a contact that " #~ "does not exists on the server.\n" #~ "This might happen if the Kopete contact list and the MSN-server contact " #~ "list are not correctly synchronized; if this is the case, you probably " #~ "should send a bug report." #~ msgstr "" #~ "Kopete 試著對伺服器上不存在的聯絡人或群組執行某個動作。\n" #~ "這有可能是因為 Kopete 上的聯絡人清單與 MSN 伺服器上的清單未同步。如果是這" #~ "樣的話,可能要請您送出一份錯誤報告。" #~ msgid "" #~ "The group name is too long; it has not been changed on the MSN server." #~ msgstr "群組名稱過長;尚未變更 MSN 伺服器上的內容。" #~ msgid "" #~ "You cannot open a Hotmail inbox because you do not have an MSN account " #~ "with a valid Hotmail or MSN mailbox." #~ msgstr "" #~ "您無法開啟 Hotmail 收件匣,因為帳號並非使用有效的 Hotmail/MSN 信箱。" #~ msgid "" #~ "You can not send messages when you are offline or when you are invisible." #~ msgstr "您離線或隱形時無法傳送訊息。" #~ msgid "" #~ "You are trying to perform an action you are not allowed to perform in " #~ "'kid mode'." #~ msgstr "您正執行一個不被允許的動作。" #~ msgid "" #~ "_n: You have one unread message in your MSN inbox.\n" #~ "You have %n unread messages in your MSN inbox." #~ msgstr "您的 MSN 收件匣有 %n 封未讀郵件。" #~ msgid "Open Inbox..." #~ msgstr "開啟收件匣..." #~ msgid "You have one new email from %1 in your MSN inbox." #~ msgstr "您的 MSN 收件匣中有一封來自 %1 的電子郵件。" #~ msgid "More Information" #~ msgstr "更多資訊" #~ msgid "Manage Subscription" #~ msgstr "管理訂閱" #~ msgid "Now Listening: ♫ %1 ♫" #~ msgstr "現在正在聽: ♫ %1 ♫" #~ msgid "" #~ "There was an error while connecting to the MSN server.\n" #~ "Error message:\n" #~ msgstr "" #~ "連線到 MSN 伺服器時發生錯誤。\n" #~ "錯誤訊息:\n" #~ msgid "Unable to lookup %1" #~ msgstr "無法尋找 %1" #~ msgid "An internal server error occurred. Please try again later." #~ msgstr "發生內部伺服器錯誤。請稍候再試。" #~ msgid "" #~ "It is no longer possible to perform this operation. The MSN server does " #~ "not allow it anymore." #~ msgstr "無法再執行此動作。MSN 伺服器已不再允許。" #~ msgid "The MSN server is busy. Please try again later." #~ msgstr "MSN 伺服器忙碌中,請稍後再試。" #~ msgid "The server is not available at the moment. Please try again later." #~ msgstr "伺服器目前無法使用,請誚後再試。" #~ msgid "" #~ "Unhandled MSN error code %1 \n" #~ "Please fill a bug report with a detailed description and if possible the " #~ "last console debug output." #~ msgstr "" #~ "無法處理的 MSN 錯誤代號 %1。\n" #~ "請將詳細的情況,還有 console 中的除錯輸出回報給開發者。" #~ msgid "View Contact's Webcam" #~ msgstr "檢視聯絡人的視訊" #~ msgid "Send Webcam" #~ msgstr "傳送視訊" #~ msgid "Please go online to block or unblock a contact." #~ msgstr "要封鎖或解除封鎖聯絡人,請先上線。" #~ msgid "Web Messenger" #~ msgstr "Web Messenger" #~ msgid "Windows Mobile" #~ msgstr "Windows Mobile" #~ msgid "MSN Mobile" #~ msgstr "MSN Mobile" #~ msgid "Send Raw C&ommand..." #~ msgstr "傳送原始命令(&O)..." #~ msgid "Send Nudge" #~ msgstr "傳送來電震動" #~ msgid "Request Display Picture" #~ msgstr "要求顯示圖片" #~ msgid "Connection closed" #~ msgstr "連線關閉" #~ msgid "Other..." #~ msgstr "其他..." #~ msgid "Please enter the email address of the person you want to invite:" #~ msgstr "請輸入您要邀請的人的電子郵件地址:" #~ msgid "" #~ "The following message has not been sent correctly:\n" #~ "%1" #~ msgstr "" #~ "下列的訊息無法正確傳送:\n" #~ "%1" #~ msgid "" #~ "%1 has sent an unimplemented invitation, the invitation was rejected.\n" #~ "The invitation was: %2" #~ msgstr "" #~ "%1 傳送尚未實作的邀請,已經拒絕了。\n" #~ "邀請內容是:%2" #~ msgid "%1 has started a chat with you" #~ msgstr "%1 已經開始與您聊天" #~ msgid "has sent a nudge" #~ msgstr "送出來電震動。" #~ msgid "has sent you a nudge" #~ msgstr "對您送出來電震動。" #~ msgid "" #~ "The following message has not been sent correctly (%1): \n" #~ "%2" #~ msgstr "" #~ "下列訊息沒有正確被傳送(%1):\n" #~ "%2" #~ msgid "These messages have not been sent correctly (%1):
    " #~ msgstr "這些訊息沒有正確被傳送(%1):
      " #~ msgid "Impossible to establish the connection" #~ msgstr "無法建立連線" #~ msgid "DEBUG: Send Raw Command - MSN Plugin" #~ msgstr "偵錯:傳送原始命令-MSN外掛程式" #~ msgid "&Change Display Name..." #~ msgstr "改變顯示名稱(&C)..." #~ msgid "&Start Chat..." #~ msgstr "開始聊天(&S)..." #~ msgid "Start Chat - MSN Plugin" #~ msgstr "開始聊天-MSN外掛程式" #~ msgid "" #~ "Please enter the email address of the person with whom you want to chat:" #~ msgstr "請輸入您想聊天的聯絡人的電子郵件位址:" #~ msgid "Change Display Name - MSN Plugin" #~ msgstr "變更顯示名稱 - MSN 外掛程式" #~ msgid "" #~ "Enter the new display name by which you want to be visible to your " #~ "friends on MSN:" #~ msgstr "請輸入您想在 MSN 上讓您的朋友看到的新顯示名稱:" #~ msgid "" #~ "The display name you entered is too long. Please use a shorter name.\n" #~ "Your display name has not been changed." #~ msgstr "" #~ "您輸入的顯示名稱太長了。請換短一點的。\n" #~ "您的顯示名稱尚未改變。" #~ msgid "" #~ "The connection with the MSN server was lost unexpectedly.\n" #~ "If you cannot reconnect now, the server might be down. In that case, " #~ "please try again later." #~ msgstr "" #~ "與 MSN 伺服器的連線意外的中斷了。\n" #~ "如果您無法重新連線,可能表示伺服器已經掛了。請稍候再試。" #~ msgid "Connection Lost - MSN Plugin" #~ msgstr "連線中斷-MSN 外掛程式" #~ msgid "Fatal Error occured while downloading buddy icon." #~ msgstr "下載朋友圖示時發生嚴重錯誤。" #~ msgid "IconLoadJob has an empty KTempFile pointer." #~ msgstr "IconLoadJob 中有空的 KTempFile 指標。" #~ msgid "MSN" #~ msgstr "MSN"
狀態