You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tde-i18n/tde-i18n-zh_TW/messages/tdebase/kcmkio.po

1987 lines
67 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# translation of kcmkio.po to Chinese (traditional)
# traditional Chinese translation of kcmkio
# Copyright (C) 2001-2002, 2003 Free Software Foundation, Inc.
# Translator: Kenduest Lee <kenduest@i18n.linux.org.tw>, 2001.
# Chao-Hsiung Liao <pesder.liao@msa.hinet.net>, 2002.
# 林耕宇 <s9321028@ncnu.edu.tw>, 2003.
msgid ""
msgstr ""
"Project-Id-Version: kcmkio\n"
"POT-Creation-Date: 2008-07-08 01:18+0200\n"
"PO-Revision-Date: 2005-08-08 12:01+0800\n"
"Last-Translator: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.2\n"
#: _translatorinfo.cpp:1
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Kenduest Lee,Chao-Hsiung Liao,林耕宇"
#: _translatorinfo.cpp:3
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr ""
"kenduest@i18n.linux.org.tw,pesder.liao@msa.hinet.net,s9321028@ncnu.edu.tw"
#: cache.cpp:105
msgid ""
"<h1>Cache</h1>"
"<p>This module lets you configure your cache settings.</p>"
"<p>The cache is an internal memory in Konqueror where recently read web pages "
"are stored. If you want to retrieve a web page again that you have recently "
"read, it will not be downloaded from the Internet, but rather retrieved from "
"the cache, which is a lot faster.</p>"
msgstr ""
"<h1>快取</h1>"
"<p>這個模組讓您設定您的快取設定。</p>"
"<p>此快取區域是在 Konqueror "
"裡存放剛讀取過的網頁的內部記憶體。如果您要再次接收剛剛讀過的網頁,就不會從網際網路下載,而是從快取中接收,這將會快得多。</p>"
#: kcookiesmain.cpp:32
msgid ""
"Unable to start the cookie handler service.\n"
"You will not be able to manage the cookies that are stored on your computer."
msgstr ""
"無法啟動 cookie handler 服務。\n"
"你無法管理儲存在你電腦上的 cookie。"
#: kcookiesmain.cpp:42
msgid "&Policy"
msgstr "政策(&P)"
#: kcookiesmain.cpp:48
msgid "&Management"
msgstr "管理(&M)"
#: kcookiesmain.cpp:83
msgid ""
"<h1>Cookies</h1> Cookies contain information that Konqueror (or other TDE "
"applications using the HTTP protocol) stores on your computer, initiated by a "
"remote Internet server. This means that a web server can store information "
"about you and your browsing activities on your machine for later use. You might "
"consider this an invasion of privacy. "
"<p> However, cookies are useful in certain situations. For example, they are "
"often used by Internet shops, so you can 'put things into a shopping basket'. "
"Some sites require you have a browser that supports cookies. "
"<p> Because most people want a compromise between privacy and the benefits "
"cookies offer, TDE offers you the ability to customize the way it handles "
"cookies. So you might want to set TDE's default policy to ask you whenever a "
"server wants to set a cookie, allowing you to decide. For your favorite "
"shopping web sites that you trust, you might want to set the policy to accept, "
"then you can access the web sites without being prompted every time TDE "
"receives a cookie."
msgstr ""
"<h1>Cookies</h1>Cookies 包含了遠端伺服器要求 Konqueror (或其他使用 HTTP 協定的 TDE 程式) "
"儲存在您電腦的資訊。這讓網頁伺服器可以在您的電腦儲存關於您的資訊與瀏覽動作以備後續使用。您可能會認為這侵犯您的隱私權。"
"<p>然而,在某些狀況下 Cookies 是非常有用的。例如在網路購物時,您可以「把貨品放入您的購物車中」。有些站台要求您必須要有一個支援 Cookies "
"的瀏覽器。"
"<p>由於大多數的人希望在方便與隱私之間取得一個平衡點, TDE 提供您一個自訂的處理 Cookies 方式。您可能希望 TDE 在伺服器要求設定 "
"Cookie 時,預設要先徵求您的同意,讓您有決定的機會,對於您偏好而且可信任的購物網站,您可以設定政策為接受 "
"Cookie如此您在使用該網站時不需要一直被詢問。"
#: kcookiesmanagement.cpp:150 kcookiesmanagement.cpp:170
msgid "DCOP Communication Error"
msgstr "DCOP 連線錯誤"
#: kcookiesmanagement.cpp:151
msgid "Unable to delete all the cookies as requested."
msgstr "無法刪除所有的 cookie"
#: kcookiesmanagement.cpp:171
msgid "Unable to delete cookies as requested."
msgstr "無法刪除 cookie"
#: kcookiesmanagement.cpp:241
msgid "<h1>Cookies Management Quick Help</h1>"
msgstr "<h1>Cookies 管理快速說明</h1>"
#: kcookiesmanagement.cpp:250
msgid "Information Lookup Failure"
msgstr "資訊查詢錯誤"
#: kcookiesmanagement.cpp:251
msgid ""
"Unable to retrieve information about the cookies stored on your computer."
msgstr "無法取得儲存在你電腦上的 cookie 的資訊"
#: kcookiesmanagement.cpp:332
msgid "End of session"
msgstr "結束工作階段"
#: kcookiespolicies.cpp:112
msgid "New Cookie Policy"
msgstr "新增 Cookie 政策"
#: kcookiespolicies.cpp:151
msgid "Change Cookie Policy"
msgstr "變更 Cookie 政策"
#: kcookiespolicies.cpp:176
msgid ""
"<qt>A policy already exists for"
"<center><b>%1</b></center>Do you want to replace it?</qt>"
msgstr "<qt>關於<center><b>%1</b></center>的政策已經存在,您確定要覆蓋它嗎?</qt>"
#: kcookiespolicies.cpp:180
msgid "Duplicate Policy"
msgstr "重複的政策"
#: kcookiespolicies.cpp:408
msgid ""
"Unable to communicate with the cookie handler service.\n"
"Any changes you made will not take effect until the service is restarted."
msgstr ""
"無法和 cookie handler 服務溝通。\n"
"這個服務重新啟動,你所做的變更才能被執行。"
#: kcookiespolicies.cpp:449
msgid ""
"<h1>Cookies</h1> Cookies contain information that Konqueror (or any other TDE "
"application using the HTTP protocol) stores on your computer from a remote "
"Internet server. This means that a web server can store information about you "
"and your browsing activities on your machine for later use. You might consider "
"this an invasion of privacy."
"<p>However, cookies are useful in certain situations. For example, they are "
"often used by Internet shops, so you can 'put things into a shopping basket'. "
"Some sites require you have a browser that supports cookies."
"<p>Because most people want a compromise between privacy and the benefits "
"cookies offer, TDE offers you the ability to customize the way it handles "
"cookies. You might, for example want to set TDE's default policy to ask you "
"whenever a server wants to set a cookie or simply reject or accept everything. "
"For example, you might choose to accept all cookies from your favorite shopping "
"web site. For this all you have to do is either browse to that particular site "
"and when you are presented with the cookie dialog box, click on <i> "
"This domain </i> under the 'apply to' tab and choose accept or simply specify "
"the name of the site in the <i> Domain Specific Policy </i> "
"tab and set it to accept. This enables you to receive cookies from trusted web "
"sites without being asked every time TDE receives a cookie."
msgstr ""
"<h1>Cookies</h1>Cookies 包含了遠端伺服器要求 Konqueror (或其他使用 HTTP 拹定的 TDE 程式) "
"儲存在您電腦的資訊。這讓網頁伺服器可以在您的電腦儲存關於您的資訊與瀏覽動作以備後續使用。您可能會認為這侵犯您的隱私權。"
"<p>然而,在某些狀況下 Cookies 是非常有用的。例如在網路購物時,您可以「把貨品放入您的購物車中」。有些站台要求您必須要有一個支援 Cookies "
"的瀏覽器。"
"<p>由於大多數的人希望在方便與隱私之間取得一個平衡點TDE 提供您一個自訂的處理 Cookies 方式。例如您可能想要設定 TDE "
"的預設政策為每次有伺服器要設定cookie 或單純地拒絕或接受任何事都要詢問您。您也可能選擇接受所有來自您喜愛的購物網站的 cookies "
"。要做這些事您可以瀏覽該特定網站,在出現 cookie 對話方塊時單擊「套用到」標籤下的<i>此網域</i>並選擇接受,或者也可以在<i>特定網域政策</i>"
"標籤中指定網站的名稱並設定為接受。這樣使您可以接收來自信任網站的 cookies 而不會在每次 TDE 收到 cookie 的時候都來問您。"
#: kenvvarproxydlg.cpp:70
msgid "Variable Proxy Configuration"
msgstr "代理伺服器參數設定"
#: kenvvarproxydlg.cpp:136 kenvvarproxydlg.cpp:285
msgid "You must specify at least one valid proxy environment variable."
msgstr "您必須指定至少一個合法的代理伺服器環境參數。"
#: kenvvarproxydlg.cpp:139 kenvvarproxydlg.cpp:288
msgid ""
"<qt>Make sure you entered the actual environment variable name rather than its "
"value. For example, if the environment variable is "
"<br><b>HTTP_PROXY=http://localhost:3128</b>"
"<br> you need to enter <b>HTTP_PROXY</b> here instead of the actual value "
"http://localhost:3128.</qt>"
msgstr ""
"<qt>請確定您輸入的是真實的環境變數名稱而非它的數值。例如環境變數為"
"<br><b>HTTP_PROXY=http://localhost:3128</b>"
"<br>則您需要在此輸入<b>HTTP_PROXY</b>而不是此變數的實際數值 http://localhost:3128。</qt>"
#: kenvvarproxydlg.cpp:147 kenvvarproxydlg.cpp:296 kproxydlg.cpp:372
msgid "Invalid Proxy Setup"
msgstr "不合法的代理伺服器設定"
#: kenvvarproxydlg.cpp:151
msgid "Successfully verified."
msgstr "檢查成功。"
#: kenvvarproxydlg.cpp:152
msgid "Proxy Setup"
msgstr "代理伺服器設定"
#: kenvvarproxydlg.cpp:179
msgid ""
"Did not detect any environment variables commonly used to set system wide proxy "
"information."
msgstr "無法找到任何常用於設定系統代理伺服器資訊的環境變數。"
#: kenvvarproxydlg.cpp:183
msgid ""
"<qt>To learn about the variable names the automatic detection process searches "
"for, press OK, click on the quick help button on the window title bar of the "
"previous dialog and then click on the \"<b>Auto Detect</b>\" button.</qt>"
msgstr "<qt>如果想要知道自動偵測之參數名稱,請按定,單擊前一個對話盒視窗標題列的快速說明按鈕,接著單擊「自動偵測」按鈕。</qt>"
#: kenvvarproxydlg.cpp:191
msgid "Automatic Proxy Variable Detection"
msgstr "自動偵測代理伺服器變數"
#: kmanualproxydlg.cpp:47
msgid "Manual Proxy Configuration"
msgstr "手動代理伺服器設定"
#: kmanualproxydlg.cpp:271
msgid "Invalid Proxy Setting"
msgstr "無效的代理伺服器設定"
#: kmanualproxydlg.cpp:272
msgid ""
"One or more of the specified proxy settings are invalid. The incorrect entries "
"are highlighted."
msgstr "一或多個指定的代理伺服器程式設定值無效。錯誤的項目已經標示出來。"
#: kmanualproxydlg.cpp:343
msgid "You entered a duplicate address. Please try again."
msgstr "您已經輸入了重複的位址。請再試一次。"
#: kmanualproxydlg.cpp:345
msgid "<qt><center><b>%1</b></center> is already in the list.</qt>"
msgstr "<qt><center><b>%1</b></center> 已經存在列表中。</qt>"
#: kmanualproxydlg.cpp:347
msgid "Duplicate Entry"
msgstr "重複的項目"
#: kmanualproxydlg.cpp:359
msgid "New Exception"
msgstr "新增例外"
#: kmanualproxydlg.cpp:366
msgid "Change Exception"
msgstr "更改例外"
#: kmanualproxydlg.cpp:442
msgid "Invalid Entry"
msgstr "無效的項目"
#: kmanualproxydlg.cpp:445
msgid "The address you have entered is not valid."
msgstr "您所輸入的位址無效。"
#: kmanualproxydlg.cpp:447
msgid ""
"<qt>Make sure none of the addresses or URLs you specified contain invalid or "
"wildcard characters such as spaces, asterisks (*), or question marks(?)."
"<p><u>Examples of VALID entries:</u>"
"<br/><code>http://mycompany.com, 192.168.10.1, mycompany.com, localhost, "
"http://localhost</code>"
"<p><u>Examples of INVALID entries:</u>"
"<br/><code>http://my company.com, http:/mycompany,com file:/localhost</code>"
"</qt>"
msgstr ""
"<qt>請確定您所指定的位址或網址沒有包含無效或萬用字元如空白、星號(*)或問號(?)。"
"<p><u>有效的項目範例:</u>"
"<br/><code>http://mycompany.com, 192.168.10.1, mycompany.com, localhost, "
"http://localhost</code>"
"<p><u>無效的項目範例:</u>"
"<br/><code>http://my company.com, http:/mycompany,com file:/localhost</code>"
"</qt>"
#: kmanualproxydlg.cpp:468
msgid "Enter the URL or address that should use the above proxy settings:"
msgstr "請輸入要使用上面的代理伺服器設定值的位址或 URL"
#: kmanualproxydlg.cpp:471
msgid ""
"Enter the address or URL that should be excluded from using the above proxy "
"settings:"
msgstr "請輸入不想使用上面的代理伺服器設定值的位址或 URL"
#: kmanualproxydlg.cpp:474
msgid ""
"<qt>Enter a valid address or url."
"<p><b><u>NOTE:</u></b> Wildcard matching such as <code>*.kde.org</code> "
"is not supported. If you want to match any host in the <code>.kde.org</code> "
"domain, e.g. <code>printing.kde.org</code>, then simply enter <code>"
".kde.org</code></qt>"
msgstr ""
"<qt>輸入有效的位址或網址。"
"<p><b><u>注意:</u></b>萬用字元例如 <code>*.kde.org</code> 是不支援的。如果您想要使用任何符合 <code>"
".kde.org</code> 網域的主機,如 <code>printing.kde.org</code>,只要輸入 <code>.kde.org</code> "
"即可</qt>"
#: kproxydlg.cpp:54
msgid "&Proxy"
msgstr "代理伺服器(&P)"
#: kproxydlg.cpp:55
msgid "&SOCKS"
msgstr "&SOCKS"
#: kproxydlg.cpp:220
msgid ""
"The address of the automatic proxy configuration script is invalid. Please "
"correct this problem before proceeding. Otherwise, your changes you will be "
"ignored."
msgstr "自動代理伺服器設定命令稿的位址是無效的。請修正後再執行。否則將忽略您的所做的變更。"
#: kproxydlg.cpp:348
msgid ""
"<h1>Proxy</h1>"
"<p>A proxy server is an intermediate program that sits between your machine and "
"the Internet and provides services such as web page caching and/or "
"filtering.</p>"
"<p>Caching proxy servers give you faster access to sites you have already "
"visited by locally storing or caching the content of those pages; filtering "
"proxy servers, on the other hand, provide the ability to block out requests for "
"ads, spam, or anything else you want to block.</p>"
"<p><u>Note:</u> Some proxy servers provide both services.</p>"
msgstr ""
"<h1>代理伺服器</h1>"
"<p>代理伺服器是位於您的電腦和網際網路的中介程式,提供網頁快取和/或過濾的服務。</p>"
"<p>快取式代理伺服器會將您曾經參訪過的網站內容儲存起來,以加速加速網際網路資料讀取速度;過濾式快取伺服器,則提供阻擋廣告、垃圾以及其他任何你想要阻擋的東西的能"
"力。</p>"
"<p><u>注意:</u>有些代理伺服器同時提供這兩種服務。</p>"
#: kproxydlg.cpp:367
msgid ""
"<qt>The proxy settings you specified are invalid."
"<p>Please click on the <b>Setup...</b> button and correct the problem before "
"proceeding; otherwise your changes will be ignored.</qt>"
msgstr ""
"<qt>您所指定的代理伺服器資訊設定無效。"
"<p>請單擊<em>設定...</em>按鈕以便在處理前修正這個問題;否則將忽略您的所做的變更。</qt>"
#: ksaveioconfig.cpp:239 ksaveioconfig.cpp:253
msgid "Update Failed"
msgstr "更新失敗"
#: ksaveioconfig.cpp:240
msgid ""
"You have to restart the running applications for these changes to take effect."
msgstr "您必須重新啟動執行中的程式才能讓這些改變生效。"
#: ksaveioconfig.cpp:254
msgid "You have to restart TDE for these changes to take effect."
msgstr "您必須重新啟動 TDE 才能讓這些改變生效。"
#: main.cpp:85
msgid ""
"<h1>Local Network Browsing</h1>Here you setup your <b>"
"\"Network Neighborhood\"</b>. You can use either the LISa daemon and the lan:/ "
"ioslave, or the ResLISa daemon and the rlan:/ ioslave."
"<br>"
"<br>About the <b>LAN ioslave</b> configuration:"
"<br> If you select it, the ioslave, <i>if available</i>"
", will check whether the host supports this service when you open this host. "
"Please note that paranoid people might consider even this to be an attack."
"<br><i>Always</i> means that you will always see the links for the services, "
"regardless of whether they are actually offered by the host. <i>Never</i> "
"means that you will never have the links to the services. In both cases you "
"will not contact the host, so nobody will ever regard you as an attacker."
"<br>"
"<br>More information about <b>LISa</b> can be found at <a "
"href=\"http://lisa-home.sourceforge.net\">the LISa Homepage</a> "
"or contact Alexander Neundorf &lt;<a href=\"mailto:neundorf@kde.org\">"
"neundorf@kde.org</a>&gt;."
msgstr ""
"<h1>本地網路瀏覽</h1>您在此設定您的<b>「網路芳鄰」</b>。您可以使用 LISa 伺服程式與 lan:/ ioslave ,或 ResLISa "
"伺服程式與 rlan:/ ioslave 。"
"<br>"
"<br>關於<b>LAN ioslave</b>設定:"
"<br>如果您選擇它,當 ioslave <i>可用時</i>會在您開啟主機時檢查該主機是否支援此服務。請注意多疑的人們甚至可能認為這是一種攻擊。"
"<br><i>總是</i>代表您會一直看到該服務的連結,不管它們是否真的是由該主機所提供。<i>永遠不</i>"
"代表您不會有該服務的連結。在這兩種情形您將不會連接到主機,因此沒有人會認為您是攻擊者。"
"<br>"
"<br>更多關於<b>LISa</b>的資訊可以在<a href=\"http://lisa-home.sourceforge.net\">"
"LISa 首頁</a>找到,或者連絡 Alexander Neundorf &lt;<a href=\"mailto:neundorf@kde.org\">"
"neundorf@kde.org</a>&gt;。"
#: main.cpp:105
msgid "&Windows Shares"
msgstr "&Windows 分享"
#: main.cpp:111
msgid "&LISa Daemon"
msgstr "&LISa 伺服程式"
#: main.cpp:125
msgid "lan:/ Iosla&ve"
msgstr "lan:/ Iosla&ve"
#: netpref.cpp:22
msgid "Timeout Values"
msgstr "逾時設定"
#: netpref.cpp:23
msgid ""
"Here you can set timeout values. You might want to tweak them if your "
"connection is very slow. The maximum allowed value is %1 seconds."
msgstr "您可以在此設定逾時時間。當連線速度很慢時,您可能會想調整它。 最大的允許值是 %1 秒。"
#: netpref.cpp:30 netpref.cpp:37 netpref.cpp:44 netpref.cpp:51
msgid " sec"
msgstr " 秒"
#: netpref.cpp:31
msgid "Soc&ket read:"
msgstr "讀取 Socket(&K):"
#: netpref.cpp:38
msgid "Pro&xy connect:"
msgstr "連結代理伺服器(&X):"
#: netpref.cpp:45
msgid "Server co&nnect:"
msgstr "連結伺服器(&N):"
#: netpref.cpp:52
msgid "&Server response:"
msgstr "伺服器回應(&S):"
#: netpref.cpp:56
msgid "FTP Options"
msgstr "FTP 選項"
#: netpref.cpp:57
msgid "Enable passive &mode (PASV)"
msgstr "啟用被動模式(PASV)(&M)"
#: netpref.cpp:58
msgid ""
"Enables FTP's \"passive\" mode. This is required to allow FTP to work from "
"behind firewalls."
msgstr "啟用 FTP 的「被動」模式。要讓 FTP 在防火牆下運作的話這是必要的。"
#: netpref.cpp:59
msgid "Mark &partially uploaded files"
msgstr "標記部分上傳的檔案(&P)"
#: netpref.cpp:60
msgid ""
"<p>Marks partially uploaded FTP files.</p>"
"<p>When this option is enabled, partially uploaded files will have a \".part\" "
"extension. This extension will be removed once the transfer is complete.</p>"
msgstr ""
"<p>標記已經部分上傳的 FTP 檔案。</p>"
"<p>當此啟用選項時,只上傳部分的檔案會加上「.part」的延伸檔名。這個延伸檔名會在傳輸全部完成後移除。</p>"
#: netpref.cpp:131
msgid ""
"<h1>Network Preferences</h1>Here you can define the behavior of TDE programs "
"when using Internet and network connections. If you experience timeouts or use "
"a modem to connect to the Internet, you might want to adjust these settings."
msgstr "<h1>網路設定</h1>您可以在這裡設定TDE程式使用網際網路及區域網路的行為。若您有逾時問題或使用數據機您或許會想調整這些設定。"
#. i18n: file cache_ui.ui line 47
#: rc.cpp:3
#, no-c-format
msgid "Disk cache &size:"
msgstr "磁碟快取大小(&S):"
#. i18n: file cache_ui.ui line 67
#: rc.cpp:6
#, no-c-format
msgid " KB"
msgstr " KB"
#. i18n: file cache_ui.ui line 78
#: rc.cpp:9
#, no-c-format
msgid "C&lear Cache"
msgstr "清除快取(&L)"
#. i18n: file cache_ui.ui line 103
#: rc.cpp:12
#, no-c-format
msgid "&Use cache"
msgstr "使用快取(&U)"
#. i18n: file cache_ui.ui line 106
#: rc.cpp:15
#, no-c-format
msgid ""
"Check this box if you want the web pages you visit to be stored on your hard "
"disk for quicker access. The stored pages will only be updated as needed "
"instead of on every visit to that site. This is especially useful if you have a "
"slow connection to the Internet."
msgstr ""
"如果您希望瀏覽過的資料能夠儲存在硬碟上,以便於能快速存取,您可以核取這個方塊。儲存的網頁只有在必要時才會下載而非在你每次參訪該網站時。如果您的網路連線速度很慢,"
"此功能將會特別有用。"
#. i18n: file cache_ui.ui line 117
#: rc.cpp:18 rc.cpp:246
#, no-c-format
msgid "Policy"
msgstr "政策"
#. i18n: file cache_ui.ui line 128
#: rc.cpp:21
#, no-c-format
msgid "&Keep cache in sync"
msgstr "保持快取同步(&K)"
#. i18n: file cache_ui.ui line 131
#: rc.cpp:24
#, no-c-format
msgid ""
"Verify whether the cached web page is valid before attempting to fetch the web "
"page again."
msgstr "直到要把一個網頁抓回來時,才確認快取的網頁是否還有效。"
#. i18n: file cache_ui.ui line 139
#: rc.cpp:27
#, no-c-format
msgid "Use cache whenever &possible"
msgstr "儘可能使用快取(&P)"
#. i18n: file cache_ui.ui line 142
#: rc.cpp:30
#, no-c-format
msgid ""
"Always use documents from the cache when available. You can still use the "
"reload button to synchronize the cache with the remote host."
msgstr "在可能的情形下永遠使用快取中的文件。您仍然可以使用重新整理按鈕來讓快取與遠端主機保持同步。"
#. i18n: file cache_ui.ui line 150
#: rc.cpp:33
#, no-c-format
msgid "O&ffline browsing mode"
msgstr "離線瀏覽模式(&F)"
#. i18n: file cache_ui.ui line 153
#: rc.cpp:36
#, no-c-format
msgid ""
"Do not fetch web pages that are not already stored in the cache. Offline mode "
"prevents you from viewing pages that you have not previously visited."
msgstr "既使網頁不在快取資料中,也不抓取。離線模式會使你只能瀏覽之前看過的網頁。"
#. i18n: file envvarproxy_ui.ui line 30
#: rc.cpp:39 rc.cpp:54
#, no-c-format
msgid ""
"<qt>\n"
"Enter the name of the environment variable, e.g. <b>FTP_PROXY</b>"
", used to store the address of the FTP proxy server."
"<p>\n"
"Alternatively, you can click on the <b>\"Auto Detect\"</b> "
"button to attempt an automatic discovery of this variable.\n"
"</qt>"
msgstr ""
"<qt>\n"
"請輸入環境變數名稱,例如 <tt>FTP_PROXY</tt>,這是用來儲存 FTP 代理伺服器的位址。"
"<p>\n"
"或者,您也可以單擊 <b>「自動偵測」</b> 按鈕試著自動取得此變數。\n"
"</qt>"
#. i18n: file envvarproxy_ui.ui line 41
#: rc.cpp:45 rc.cpp:87
#, no-c-format
msgid ""
"<qt>\n"
"Enter the name of the environment variable, e.g. <b>HTTP_PROXY</b>"
", used to store the address of the HTTP proxy server."
"<p>\n"
"Alternatively, you can click on the <b>\"Auto Detect\"</b> "
"button to attempt automatic discovery of this variable.\n"
"</qt>"
msgstr ""
"<qt>\n"
"請輸入環境變數名稱,例如 <tt>HTTP_PROXY</tt>,這是用來儲存 HTTP 代理伺服器的位址。"
"<p>\n"
"或者,您也可以單擊 <b>「自動偵測」</b> 按鈕試著自動取得此變數。\n"
"</qt>"
#. i18n: file envvarproxy_ui.ui line 49
#: rc.cpp:51 rc.cpp:375
#, no-c-format
msgid "&FTP:"
msgstr "&FTP:"
#. i18n: file envvarproxy_ui.ui line 66
#: rc.cpp:60 rc.cpp:378
#, no-c-format
msgid "HTTP&S:"
msgstr "HTTP&S:"
#. i18n: file envvarproxy_ui.ui line 75
#: rc.cpp:63 rc.cpp:93
#, no-c-format
msgid ""
"<qt>\n"
"Enter the name of the environment variable, e.g. <b>HTTPS_PROXY</b>"
", used to store the address of the HTTPS proxy server."
"<p>\n"
"Alternatively, you can click on the <b>\"Auto Detect\"</b> "
"button to attempt an automatic discovery of this variable.\n"
"</qt>"
msgstr ""
"<qt>\n"
"請輸入環境變數名稱,例如 <tt>HTTPS_PROXY</tt>,這是用來儲存 HTTPS 代理伺服器的位址。"
"<p>\n"
"或者,您也可以單擊 <b>「自動偵測」</b> 按鈕試著自動取得此變數。\n"
"</qt>"
#. i18n: file envvarproxy_ui.ui line 83
#: rc.cpp:69
#, no-c-format
msgid "Show the &value of the environment variables"
msgstr "顯示環境變數(&V)"
#. i18n: file envvarproxy_ui.ui line 91
#: rc.cpp:72
#, no-c-format
msgid "&Verify"
msgstr "檢查(&V)"
#. i18n: file envvarproxy_ui.ui line 94
#: rc.cpp:75
#, no-c-format
msgid ""
"<qt>Verify whether or not the environment variable names you supplied are "
"valid. If an environment variable is not found, the associated labels will be "
"<b>highlighted</b> to indicate that they are invalid.</qt>"
msgstr "<qt>單擊此按鈕以快速檢查您提供的環境變數名稱是否正確。如果找不到環境變數,相關的標籤會以<b>反白</b>來指出不正確的設定。</qt>"
#. i18n: file envvarproxy_ui.ui line 102
#: rc.cpp:78
#, no-c-format
msgid "Auto &Detect"
msgstr "自動偵測(&D)"
#. i18n: file envvarproxy_ui.ui line 105
#: rc.cpp:81
#, no-c-format
msgid ""
"<qt>Attempt automatic discovery of the environment variables used for setting "
"system wide proxy information."
"<p> This feature works by searching for commonly used variable names such as "
"HTTP_PROXY, FTP_PROXY and NO_PROXY.</qt>"
msgstr ""
"<qt>自動尋找系統中可能是用來設定 proxy 的環境變數。"
"<p>尋找方法是搜尋一些可能的變數名稱,像是 HTTP_PROXY, FTP_PROXY 和 NO_PROXY.</qt>"
#. i18n: file envvarproxy_ui.ui line 113
#: rc.cpp:84 rc.cpp:381
#, no-c-format
msgid "H&TTP:"
msgstr "H&TTP:"
#. i18n: file envvarproxy_ui.ui line 144
#: rc.cpp:99 rc.cpp:108
#, no-c-format
msgid ""
"<qt>\n"
"Enter the environment variable, e.g. <b>NO_PROXY</b>"
", used to store the addresses of sites for which the proxy server should not be "
"used."
"<p>\n"
"Alternatively, you can click on the <b>\"Auto Detect\"</b> "
"button to attempt an automatic discovery of this variable.\n"
"</qt>"
msgstr ""
"<qt>\n"
"請輸入環境變數名稱,例如 <tt>FTP_PROXY</tt>,這是用來儲存 FTP 代理伺服器的位址。"
"<p>\n"
"或者,您也可以單擊 <b>「自動偵測」</b> 按鈕試著自動取得此變數。\n"
"</qt>"
#. i18n: file envvarproxy_ui.ui line 152
#: rc.cpp:105
#, no-c-format
msgid "NO &PROXY:"
msgstr "無 PROXY(&P)"
#. i18n: file kcookiesmanagementdlg_ui.ui line 33
#: rc.cpp:114
#, no-c-format
msgid "Domain [Group]"
msgstr "網域 [群組]"
#. i18n: file kcookiesmanagementdlg_ui.ui line 44
#: rc.cpp:117
#, no-c-format
msgid "Host [Set By]"
msgstr "主機 [Set By]"
#. i18n: file kcookiesmanagementdlg_ui.ui line 85
#: rc.cpp:120 rc.cpp:237 rc.cpp:680
#, no-c-format
msgid "D&elete"
msgstr "刪除(&E)"
#. i18n: file kcookiesmanagementdlg_ui.ui line 93
#: rc.cpp:123 rc.cpp:240 rc.cpp:686
#, no-c-format
msgid "Delete A&ll"
msgstr "刪除全部(&L)"
#. i18n: file kcookiesmanagementdlg_ui.ui line 101
#: rc.cpp:126
#, no-c-format
msgid "Change &Policy..."
msgstr "變更政策(&P)..."
#. i18n: file kcookiesmanagementdlg_ui.ui line 109
#: rc.cpp:129
#, no-c-format
msgid "&Reload List"
msgstr "重新讀取列表(&R)"
#. i18n: file kcookiesmanagementdlg_ui.ui line 144
#: rc.cpp:132 rc.cpp:254
#, no-c-format
msgid "..."
msgstr "..."
#. i18n: file kcookiesmanagementdlg_ui.ui line 147
#: rc.cpp:135 rc.cpp:257
#, no-c-format
msgid "Clear Search"
msgstr "清除搜尋"
#. i18n: file kcookiesmanagementdlg_ui.ui line 155
#: rc.cpp:138 rc.cpp:260
#, no-c-format
msgid "&Search:"
msgstr "搜尋(&S):"
#. i18n: file kcookiesmanagementdlg_ui.ui line 166
#: rc.cpp:141
#, no-c-format
msgid "Search interactively for domains and hosts"
msgstr "互動式搜尋網域和主機"
#. i18n: file kcookiesmanagementdlg_ui.ui line 181
#: rc.cpp:144
#, no-c-format
msgid "Details"
msgstr "詳細資料"
#. i18n: file kcookiesmanagementdlg_ui.ui line 216
#: rc.cpp:147
#, no-c-format
msgid "Name:"
msgstr "名稱:"
#. i18n: file kcookiesmanagementdlg_ui.ui line 227
#: rc.cpp:150
#, no-c-format
msgid "Value:"
msgstr "數值:"
#. i18n: file kcookiesmanagementdlg_ui.ui line 238
#: rc.cpp:153
#, no-c-format
msgid "Domain:"
msgstr "網域:"
#. i18n: file kcookiesmanagementdlg_ui.ui line 249
#: rc.cpp:156
#, no-c-format
msgid "Path:"
msgstr "路徑:"
#. i18n: file kcookiesmanagementdlg_ui.ui line 260
#: rc.cpp:159
#, no-c-format
msgid "Expires:"
msgstr "過期:"
#. i18n: file kcookiesmanagementdlg_ui.ui line 271
#: rc.cpp:162
#, no-c-format
msgid "Secure:"
msgstr "安全性:"
#. i18n: file kcookiespoliciesdlg_ui.ui line 24
#: rc.cpp:165
#, no-c-format
msgid "Enable coo&kies"
msgstr "啟用 Cookies(&K)"
#. i18n: file kcookiespoliciesdlg_ui.ui line 30
#: rc.cpp:168
#, no-c-format
msgid ""
"<qt>\n"
"Enable cookie support. Normally you will want to have cookie support enabled "
"and customize it to suit your privacy needs."
"<p>\n"
"Please note that disabling cookie support might make many web sites "
"unbrowsable.\n"
"</qt>"
msgstr ""
"<qt>\n"
"這個選項將啟動 cookie 支援。一般您會希望啟用 cookie 支援並調整 它以符合您的隱私需求。"
"<p>\n"
"請注意停用 cookie 支援可能造成許多網站無法瀏覽。\n"
"</qt>"
#. i18n: file kcookiespoliciesdlg_ui.ui line 49
#: rc.cpp:174
#, no-c-format
msgid "Only acce&pt cookies from originating server"
msgstr "只接受來自原伺服器的 cookies(&P)"
#. i18n: file kcookiespoliciesdlg_ui.ui line 54
#: rc.cpp:177
#, no-c-format
msgid ""
"<qt>\n"
"Reject the so called third-party cookies. These are cookies that originate from "
"a site other than the one you are currently browsing. For example, if you visit "
"<b>www.foobar.com</b> while this option is on, only cookies that originate from "
"www.foobar.com will be processed per your settings. Cookies from any other site "
"will be rejected. This reduces the chances of site operators compiling a "
"profile about your daily browsing habits.\n"
"</qt>"
msgstr ""
"<qt>\n"
"拒絕所謂的第三方 cookies。這些 cookies 是由您正在瀏覽的網站以外的網站所產生的。比方說當您參觀 <b>www.foobar.com</b> "
"時選取了這個選項,只有來自 www.foobar.com 的 cookies 才會被處理。所有其他的 cookies "
"會被自動拒絕。這減少了網站管理者收集您每日瀏覽習慣的機會。\n"
"</qt>"
#. i18n: file kcookiespoliciesdlg_ui.ui line 62
#: rc.cpp:182
#, no-c-format
msgid "Automaticall&y accept session cookies"
msgstr "自動接受工作階段 cookies(&Y)"
#. i18n: file kcookiespoliciesdlg_ui.ui line 68
#: rc.cpp:185
#, no-c-format
msgid ""
"<qt>\n"
"Automatically accept temporary cookies meant to expire at the end of the "
"current session. Such cookies will not be stored in your computer's hard drive "
"or storage device. Instead, they are deleted when you close all applications "
"(e.g. your browser) that use them."
"<p>\n"
"<u>NOTE:</u> Checking this option along with the next one will override your "
"default as well as site specific cookie policies. However, doing so also "
"increases your privacy since all cookies will be removed when the current "
"session ends.\n"
"</qt>"
msgstr ""
"<qt>\n"
"自動接收暫存 cookies 代表它輔導報導們會在目前的工作階段結束時過期。。這類 cookies "
"不會儲存在您電腦的硬碟或儲存裝置裡。因為當您關閉所有使用它們的應用程式(例如您的瀏覽器)時,它們就被刪除了。"
"<p>\n"
"<u>注意:</u>選取此選項連帶地會覆蓋您的特定網站 cookie 政策。然而,這麼做會增進您的隱私,因為所有的 cookies "
"會在目前工作階段結束時移除。\n"
"</qt>"
#. i18n: file kcookiespoliciesdlg_ui.ui line 76
#: rc.cpp:191
#, no-c-format
msgid "Treat &all cookies as session cookies"
msgstr "把所有 cookies 當做工作階段 cookies(&A)"
#. i18n: file kcookiespoliciesdlg_ui.ui line 82
#: rc.cpp:194
#, no-c-format
msgid ""
"<qt>\n"
"Treat all cookies as session cookies. Session cookies are small pieces of data "
"that are temporarily stored in your computer's memory until you quit or close "
"all applications (e.g. your browser) that use them. Unlike regular cookies, "
"session cookies are never stored on your hard drive or other storage medium."
"<p>\n"
"<u>NOTE:</u> Checking this option along with the previous one will override "
"your default as well as site specific cookie policies. However, doing so also "
"increases your privacy since all cookies will be removed when the current "
"session ends.\n"
"</qt>"
msgstr ""
"<qt>\n"
"把所有 cookies 當做工作階段 cookies。工作階段 cookies "
"是一小段資料,它們暫時儲存在電腦的記憶體中,直到您離開或關閉所有使用它們的應用程式(例如您的瀏覽器)。不同於一般的 cookies ,工作階段 cookies "
"不會儲存在您的硬碟或本地端的儲存裝置上。"
"<p>\n"
"<u>注意:</u>選取此選項連帶地會覆蓋您的特定網站 cookie 政策。然而這麼做會增進您的隱私因為所有的cookies "
"會在目前工作階段結束時移除。\n"
"</qt>"
#. i18n: file kcookiespoliciesdlg_ui.ui line 92
#: rc.cpp:200
#, no-c-format
msgid "Default Policy"
msgstr "預設政策"
#. i18n: file kcookiespoliciesdlg_ui.ui line 106
#: rc.cpp:203
#, no-c-format
msgid ""
"<qt>\n"
"Determines how cookies received from a remote machine will be handled: \n"
"<ul>\n"
"<li><b>Ask</b> will cause TDE to ask for your confirmation whenever a server "
"wants to set a cookie.\"</li>\n"
"<li><b>Accept</b> will cause cookies to be accepted without prompting you.</li>"
"\n"
"<li><b>Reject</b> will cause the cookiejar to refuse all cookies it "
"receives.</li>\n"
"</ul>"
"<p>\n"
"<u>NOTE:</u> Domain specific policies, which can be set below, always take "
"precedence over the default policy.\n"
"</qt>"
msgstr ""
"<qt>\n"
"決定收到來自遠端機器的 cookies 將如何處理:\n"
"<ul>\n"
"<li><b>詢問</b>會讓 TDE 在每次有伺服器要設定 cookie 時要求您的許可</li>\n"
"<li><b>接受</b>會不提示您而接受 cookies</li>\n"
"<li><b>拒絕</b>會拒絕所有收到的 cookies</li>\n"
"</ul>"
"<p>\n"
"<u>注意:</u>特定網域政策可以在下面設定,它的優先權會高於預設的政策。\n"
"</qt>"
#. i18n: file kcookiespoliciesdlg_ui.ui line 117
#: rc.cpp:214
#, no-c-format
msgid "Ask &for confirmation"
msgstr "詢問以獲得確認(&F)"
#. i18n: file kcookiespoliciesdlg_ui.ui line 125
#: rc.cpp:217
#, no-c-format
msgid "Accep&t all cookies"
msgstr "接受所有 cookies(&T)"
#. i18n: file kcookiespoliciesdlg_ui.ui line 133
#: rc.cpp:220
#, no-c-format
msgid "Re&ject all cookies"
msgstr "拒絕所有 cookies(&J)"
#. i18n: file kcookiespoliciesdlg_ui.ui line 143
#: rc.cpp:223
#, no-c-format
msgid "Site Policy"
msgstr "網站政策"
#. i18n: file kcookiespoliciesdlg_ui.ui line 148
#: rc.cpp:226
#, no-c-format
msgid ""
"<qt>\n"
"To add a new policy, simply click on the <b>Add...</b> "
"button and supply the necessary information. To change an existing policy, use "
"the <b>Change...</b> button and choose the new policy from the policy dialog "
"box. Clicking on the <b>Delete</b> button will remove the currently selected "
"policy causing the default policy setting to be used for that domain whereas <b>"
"Delete All</b> will remove all the site specific policies.\n"
"</qt>"
msgstr ""
"<qt>\n"
"要增加新的政策。只要單擊 <b>新增...</b>按鈕,並提供對話窗中必須的資訊。要變更一個現存的政策,單擊 <b>變更...</b>"
"按鈕,並在對話窗中選擇新的政策。單擊 <b>刪除</b> 將會移除您所選擇的項目,並以預設的政策取代該網域的政策。<b>刪除全部</b> "
"會移除所有的特定網站政策。\n"
"</qt>"
#. i18n: file kcookiespoliciesdlg_ui.ui line 184
#: rc.cpp:231 rc.cpp:428 rc.cpp:668
#, no-c-format
msgid "&New..."
msgstr "新增(&N)..."
#. i18n: file kcookiespoliciesdlg_ui.ui line 192
#: rc.cpp:234 rc.cpp:674
#, no-c-format
msgid "Chan&ge..."
msgstr "變更(&H)..."
#. i18n: file kcookiespoliciesdlg_ui.ui line 216
#: rc.cpp:243
#, no-c-format
msgid "Domain"
msgstr "網域"
#. i18n: file kcookiespoliciesdlg_ui.ui line 254
#: rc.cpp:249
#, no-c-format
msgid ""
"<qt>\n"
"List of sites for which you have set a specific cookie policy. Specific "
"policies override the default policy setting for these sites.\n"
"</qt>"
msgstr ""
"<qt>\n"
"你所設定使用不同的 cookie 處理方式的網站列表。 對這些網站,系統會使用自訂的 cookie 處理方式,原不是預設的處理方式。\n"
"</qt>"
#. i18n: file kcookiespoliciesdlg_ui.ui line 295
#: rc.cpp:263
#, no-c-format
msgid "Search interactively for domains"
msgstr "互動式搜尋網域"
#. i18n: file kproxydlg_ui.ui line 22
#: rc.cpp:266
#, no-c-format
msgid ""
"<qt>\n"
"Setup proxy configuration.\n"
"<p>\n"
"A proxy server is an intermediate machine that sits between your computer and "
"the Internet and provides services such as web page caching and filtering. "
"Caching proxy servers give you faster access to web sites you have already "
"visited by locally storing or caching those pages; filtering proxy servers "
"usually provide the ability to block out requests for ads, spam, or anything "
"else you want to block.\n"
"<p>\n"
"If you are uncertain whether or not you need to use a proxy server to connect "
"to the Internet, consult your Internet service provider's setup guide or your "
"system administrator.\n"
"</qt>"
msgstr ""
"<qt>\n"
"設定代理伺服器組態。\n"
"<p>\n"
"代理伺服器是位於您的電腦和網際網路的中介程式,提供網頁快取和/或過濾的服務。</p>"
"<p>快取式代理伺服器會將您曾經參訪過的網站內容儲存起來,以加速加速網際網路資料讀取速度;過濾式快取伺服器,則提供阻擋廣告、垃圾以及其他任何你想要阻擋的東西的能"
"力。\n"
"<p>\n"
"若您不知道是否需要設定代理伺服器,請先參考您的網路服務供應商的設定指南,或詢問系統管理員。\n"
"</qt>"
#. i18n: file kproxydlg_ui.ui line 59
#: rc.cpp:275
#, no-c-format
msgid "Connect to the &Internet directly"
msgstr "直接連線到 Internet(&I)"
#. i18n: file kproxydlg_ui.ui line 65
#: rc.cpp:278
#, no-c-format
msgid "Connect to the Internet directly."
msgstr "直接連線到網際網路。"
#. i18n: file kproxydlg_ui.ui line 76
#: rc.cpp:281
#, no-c-format
msgid "A&utomatically detect proxy configuration"
msgstr "自動偵測代理伺服器設定(&U)"
#. i18n: file kproxydlg_ui.ui line 83
#: rc.cpp:284
#, no-c-format
msgid ""
"<qt>\n"
"Automatically detect and configure the proxy settings."
"<p>\n"
"Automatic detection is performed using the <b>Web Proxy Auto-Discovery Protocol "
"(WPAD)</b>."
"<p>\n"
"<b>NOTE:</b> This option might not work properly or not work at all in some "
"UNIX/Linux distributions. If you encounter a problem when using this option, "
"please check the FAQ section at http://konqueror.kde.org.\n"
"</qt>"
msgstr ""
"<qt>\n"
"自動偵測並設定代理伺服器設定值。"
"<p>\n"
"自動偵測是使用 <b>網頁代理伺服器自動發現協定 (WPAD)</b> 進行的。"
"<p>\n"
"<b>注意:</b>這個選項在某些 UNIX/Linux 發行版本可能無法正常運作或者完全無法運作。如果您在使用這個選項時遇到問題,請查閱在 "
"http://konqueror.kde.org 的 FAQ 章節。\n"
"</qt>"
#. i18n: file kproxydlg_ui.ui line 94
#: rc.cpp:291
#, no-c-format
msgid "U&se the following proxy configuration URL"
msgstr "使用下列代理伺服器設定網址(&s):"
#. i18n: file kproxydlg_ui.ui line 97
#: rc.cpp:294
#, no-c-format
msgid "Use the specified proxy script URL to configure the proxy settings."
msgstr "使用指定的代理伺服器命令稿網址來設定代理伺服器設定值。"
#. i18n: file kproxydlg_ui.ui line 141
#: rc.cpp:297
#, no-c-format
msgid "Enter the address for the proxy configuration script."
msgstr "請輸入代理伺服器組態命令稿位址。"
#. i18n: file kproxydlg_ui.ui line 170
#: rc.cpp:300
#, no-c-format
msgid "Use preset proxy environment &variables"
msgstr "預設環境變數(&V)"
#. i18n: file kproxydlg_ui.ui line 176
#: rc.cpp:303
#, no-c-format
msgid ""
"<qt>\n"
"Use environment variables to configure the proxy settings."
"<p>\n"
"Environment variables such as <b>HTTP_PROXY</b> and <b>NO_PROXY</b> "
"are usually used in multi-user UNIX installations, where both graphical and "
"non-graphical applications need to share the same proxy configuration "
"information.\n"
"</qt>"
msgstr ""
"<qt>\n"
"使用環境變數來設定代理伺服器設定值。"
"<p>\n"
"環境變數,像是 <b>HTTP_PROXY</b> 和 <b>NO_PROXY</b> 常常在多使用者的 UNIX "
"系統中使用,而無論是圖型介面程式或是文字介面程式都共用同樣的代理伺服器資訊。\n"
"</qt>"
#. i18n: file kproxydlg_ui.ui line 187
#: rc.cpp:309 rc.cpp:321
#, no-c-format
msgid "Setup..."
msgstr "設定..."
#. i18n: file kproxydlg_ui.ui line 190
#: rc.cpp:312
#, no-c-format
msgid "Show the proxy environment variable configuration dialog."
msgstr "顯示代理伺服器環境變數組態對話盒。"
#. i18n: file kproxydlg_ui.ui line 219
#: rc.cpp:315
#, no-c-format
msgid "&Manually specify the proxy settings"
msgstr "手動指定代理伺服器設定值(&M)"
#. i18n: file kproxydlg_ui.ui line 222
#: rc.cpp:318
#, no-c-format
msgid "Manually enter proxy server configuration information."
msgstr "手動輸入代理伺服器的設定資訊。"
#. i18n: file kproxydlg_ui.ui line 236
#: rc.cpp:324
#, no-c-format
msgid "Show the manual proxy configuration dialog."
msgstr "顯示手動代理伺服器設定對話盒。"
#. i18n: file kproxydlg_ui.ui line 251
#: rc.cpp:327
#, no-c-format
msgid "Authori&zation"
msgstr "認證(&Z)"
#. i18n: file kproxydlg_ui.ui line 262
#: rc.cpp:330
#, no-c-format
msgid "Prompt as &needed"
msgstr "需要時提示(&N)"
#. i18n: file kproxydlg_ui.ui line 268
#: rc.cpp:333
#, no-c-format
msgid "Prompt for login information whenever it is required."
msgstr "顯示登入資訊"
#. i18n: file kproxydlg_ui.ui line 279
#: rc.cpp:336
#, no-c-format
msgid "Use the following lo&gin information."
msgstr "使用下列登入資訊(&G)。"
#. i18n: file kproxydlg_ui.ui line 282
#: rc.cpp:339
#, no-c-format
msgid "Use the information below to login into proxy servers as needed."
msgstr "使用以下的資訊來登入代理伺服器"
#. i18n: file kproxydlg_ui.ui line 321
#: rc.cpp:342 rc.cpp:351
#, no-c-format
msgid "Login password."
msgstr "登入密碼。"
#. i18n: file kproxydlg_ui.ui line 332
#: rc.cpp:345 rc.cpp:357
#, no-c-format
msgid "Login name."
msgstr "登入名稱。"
#. i18n: file kproxydlg_ui.ui line 343
#: rc.cpp:348
#, no-c-format
msgid "Password:"
msgstr "密碼:"
#. i18n: file kproxydlg_ui.ui line 357
#: rc.cpp:354
#, no-c-format
msgid "Username:"
msgstr "使用者名稱:"
#. i18n: file kproxydlg_ui.ui line 375
#: rc.cpp:360
#, no-c-format
msgid "O&ptions"
msgstr "選項(&P)"
#. i18n: file kproxydlg_ui.ui line 386
#: rc.cpp:363
#, no-c-format
msgid "Use persistent connections to proxy"
msgstr "使用 HTTP/1.1 來連線(較快速)"
#. i18n: file kproxydlg_ui.ui line 392
#: rc.cpp:366
#, no-c-format
msgid ""
"<qt>\n"
"Use persistent proxy connection."
"<p>\n"
"Although a persistent proxy connection is faster, note that it only works "
"correctly with proxies that are fully HTTP 1.1 compliant. Do <b>not</b> "
"use this option in combination with non-HTTP 1.1 compliant proxy servers such "
"as JunkBuster and WWWOfle.\n"
"</qt>"
msgstr ""
"<qt>\n"
"使用 HTTP/1.1 來連線."
"<p>\n"
"雖然 HTTP/1.1 中的持續性連線比較快速,但是只能使用在支援 HTTP/1.1 的 代理伺服器上。<b>請勿</b> "
"在不支援 HTTP/1.1 的代理伺服器啟動這個選項。 (例如 JunkBuster 和 WWWOfle)\n"
"</qt>"
#. i18n: file manualproxy_ui.ui line 27
#: rc.cpp:372
#, no-c-format
msgid "Ser&vers"
msgstr "伺服器(&v)"
#. i18n: file manualproxy_ui.ui line 95
#: rc.cpp:384
#, no-c-format
msgid "Enter the address of the HTTP proxy server."
msgstr "請輸入 HTTP 代理伺服器位址。"
#. i18n: file manualproxy_ui.ui line 103
#: rc.cpp:387
#, no-c-format
msgid "Enter the address of the HTTPS proxy server."
msgstr "請輸入 HTTPS 代理伺服器位址。"
#. i18n: file manualproxy_ui.ui line 111
#: rc.cpp:390
#, no-c-format
msgid "Enter the address of the FTP proxy server."
msgstr "請輸入 FTP 代理伺服器位址。"
#. i18n: file manualproxy_ui.ui line 122
#: rc.cpp:393
#, no-c-format
msgid ""
"Enter the port number of the FTP proxy server. Default 8080. Another common "
"value is 3128."
msgstr "請輸入 FTP 代理伺服器通訊埠號碼。預設值為 8080。另一個常用的值是 3128。"
#. i18n: file manualproxy_ui.ui line 133
#: rc.cpp:396 rc.cpp:399
#, no-c-format
msgid ""
"Enter the port number of the HTTP proxy server. Default is 8080. Another common "
"value is 3128."
msgstr "請輸入 HTTP 代理伺服器通訊埠號碼。預設值為 8080。另一個常用的值是 3128。"
#. i18n: file manualproxy_ui.ui line 175
#: rc.cpp:402
#, no-c-format
msgid "&Use the same proxy server for all protocols"
msgstr "所有通訊協定都使用相同的代理伺服器(&U)"
#. i18n: file manualproxy_ui.ui line 193
#: rc.cpp:405
#, no-c-format
msgid "E&xceptions"
msgstr "例外(&X)"
#. i18n: file manualproxy_ui.ui line 204
#: rc.cpp:408
#, no-c-format
msgid "Use proxy only for entries in this list"
msgstr "只有在列表中的項目才使用代理伺服器"
#. i18n: file manualproxy_ui.ui line 209
#: rc.cpp:411
#, no-c-format
msgid ""
"<qt>\n"
"Reverse the use of the exception list. Checking this box will result in the "
"proxy servers being used only when the requested URL matches one of the "
"addresses listed here."
"<p>This feature is useful if all you want or need is to use a proxy server for "
"a few specific sites."
"<p>If you have more complex requirements you might want to use a configuration "
"script.\n"
"</qt>"
msgstr ""
"<qt>\n"
"反轉例外列表的功能。核取此選項會使得只有當要求的 URL 符合此位址列表其中之一時才使用代理伺服器。"
"<p>如果您只需要在少數特定網站使用代理伺服器時這個功能相當有幫助。"
"<p>如果您有更複雜的需求,您可能需要使用設定命令稿。\n"
"</qt>"
#. i18n: file manualproxy_ui.ui line 228
#: rc.cpp:416
#, no-c-format
msgid "D&elete All"
msgstr "刪除全部(&E)"
#. i18n: file manualproxy_ui.ui line 231
#: rc.cpp:419
#, no-c-format
msgid "Remove all proxy exception addresses from the list."
msgstr "移除所有的項目"
#. i18n: file manualproxy_ui.ui line 242
#: rc.cpp:422
#, no-c-format
msgid "De&lete"
msgstr "刪除(&L)"
#. i18n: file manualproxy_ui.ui line 245
#: rc.cpp:425
#, no-c-format
msgid "Remove the selected proxy exception address from the list."
msgstr "移除選取的項目"
#. i18n: file manualproxy_ui.ui line 256
#: rc.cpp:431
#, no-c-format
msgid "Add new proxy exception address to the list."
msgstr "加入一個新的不使用代理伺服器的網址"
#. i18n: file manualproxy_ui.ui line 267
#: rc.cpp:434
#, no-c-format
msgid "C&hange..."
msgstr "改變(&H)..."
#. i18n: file manualproxy_ui.ui line 270
#: rc.cpp:437
#, no-c-format
msgid "Change the selected proxy exception address."
msgstr "改變選擇的代理伺服器例外位址。"
#. i18n: file policydlg_ui.ui line 27
#: rc.cpp:440
#, no-c-format
msgid "&Domain name:"
msgstr "網域名稱(&D):"
#. i18n: file policydlg_ui.ui line 35
#: rc.cpp:443 rc.cpp:448
#, no-c-format
msgid ""
"<qt>\n"
"Enter the host or domain to which this policy applies, e.g. <b>www.kde.org</b> "
"or <b>.kde.org</b>.\n"
"</qt>"
msgstr ""
"<qt>\n"
"請輸入此要套用此政策的主機或網域。例如 <i>www.kde.org</i> 或 <i>.kde.org</i>。\n"
"</qt>"
#. i18n: file policydlg_ui.ui line 53
#: rc.cpp:453
#, no-c-format
msgid "&Policy:"
msgstr "政策(&P):"
#. i18n: file policydlg_ui.ui line 66
#: rc.cpp:456 rc.cpp:475
#, no-c-format
msgid ""
"<qt>\n"
"Select the desired policy:\n"
"<ul>\n"
"<li><b>Accept</b> - Allows this site to set cookies</li>\n"
"<li><b>Reject</b> - Refuse all cookies sent from this site</li>\n"
"<li><b>Ask</b> - Prompt when cookies are received from this site</li>\n"
"</ul>\n"
"</qt>"
msgstr ""
"<qt>\n"
"選擇欲使用的政策:\n"
"<ul>\n"
"<li><b>接受</b> - 允許此網址設定 cookie</li>\n"
"<li><b>拒絕</b> - 拒絕所有網址送來的 cookie</li>\n"
"<li><b>詢問</b> - 詢問使用者是否接受cookie</li>\n"
"</ul>\n"
"</qt>"
#. i18n: file policydlg_ui.ui line 72
#: rc.cpp:466
#, no-c-format
msgid "Accept"
msgstr "接受"
#. i18n: file policydlg_ui.ui line 77
#: rc.cpp:469
#, no-c-format
msgid "Reject"
msgstr "拒絕"
#. i18n: file policydlg_ui.ui line 82
#: rc.cpp:472
#, no-c-format
msgid "Ask"
msgstr "詢問"
#. i18n: file socksbase.ui line 16
#: rc.cpp:485
#, no-c-format
msgid "SOCKS"
msgstr "SOCKS"
#. i18n: file socksbase.ui line 34
#: rc.cpp:488
#, no-c-format
msgid "&Enable SOCKS support"
msgstr "啟用 SOCKS 的支援(&E)"
#. i18n: file socksbase.ui line 37
#: rc.cpp:491
#, no-c-format
msgid ""
"Check this to enable SOCKS4 and SOCKS5 support in TDE applications and I/O "
"subsystems."
msgstr "核取此項以啟用在 TDE 應用程式與輸出/入子系統中的 SOCKS4 與 SOCKS5 的支援。"
#. i18n: file socksbase.ui line 48
#: rc.cpp:494
#, no-c-format
msgid "SOCKS Implementation"
msgstr "SOCKS 實作"
#. i18n: file socksbase.ui line 59
#: rc.cpp:497
#, no-c-format
msgid "A&uto detect"
msgstr "自動偵測(&U)"
#. i18n: file socksbase.ui line 65
#: rc.cpp:500
#, no-c-format
msgid ""
"If you select Autodetect, then TDE will automatically search for an "
"implementation of SOCKS on your computer."
msgstr "如果您選擇自動偵測, TDE 將會自動搜尋在您電腦上 SOCKS 的實作。"
#. i18n: file socksbase.ui line 73
#: rc.cpp:503
#, no-c-format
msgid "&NEC SOCKS"
msgstr "&NEC SOCKS"
#. i18n: file socksbase.ui line 79
#: rc.cpp:506
#, no-c-format
msgid "This will force TDE to use NEC SOCKS if it can be found."
msgstr "這將會強迫 TDE 在找到 NEC SOCKS 時使用它。"
#. i18n: file socksbase.ui line 87
#: rc.cpp:509
#, no-c-format
msgid "Use &custom library"
msgstr "使用自訂函式庫(&C)"
#. i18n: file socksbase.ui line 93
#: rc.cpp:512
#, no-c-format
msgid ""
"Select custom if you wish to use an unlisted SOCKS library. Please note that "
"this may not always work as it depends on the API of the library which you "
"specify (below)."
msgstr "如果您希望使用未列出的 SOCKS 函式庫,請選擇自訂。請注意當它依附於您在下面指定的函式庫的 API 時並不一定能運作。"
#. i18n: file socksbase.ui line 117
#: rc.cpp:515
#, no-c-format
msgid "&Path:"
msgstr "路徑(&P):"
#. i18n: file socksbase.ui line 137
#: rc.cpp:518
#, no-c-format
msgid "Enter the path to an unsupported SOCKS library."
msgstr "輸入未支援的 SOCKS 函式庫的路徑。"
#. i18n: file socksbase.ui line 147
#: rc.cpp:521
#, no-c-format
msgid "&Dante"
msgstr "&Dante"
#. i18n: file socksbase.ui line 153
#: rc.cpp:524
#, no-c-format
msgid "This will force TDE to use Dante if it can be found."
msgstr "這將會強迫 TDE 在找到 Dante 時使用它。"
#. i18n: file socksbase.ui line 174
#: rc.cpp:527
#, no-c-format
msgid "Additional Library Search Paths"
msgstr "額外的函式庫搜尋路徑"
#. i18n: file socksbase.ui line 177
#: rc.cpp:530
#, no-c-format
msgid ""
"Here you can specify additional directories to search for the SOCKS libraries. "
"/usr/lib, /usr/local/lib, /usr/local/socks5/lib and /opt/socks5/lib are already "
"searched by default."
msgstr ""
"您可以在這裡指定用來搜尋 SOCKS 函式庫的額外目錄。/usr/lib、/usr/local/lib、/usr/local/socks5/lib 與 "
"/opt/socks5/lib 都已經預設為搜尋路徑。"
#. i18n: file socksbase.ui line 186
#: rc.cpp:533
#, no-c-format
msgid "Path"
msgstr "路徑"
#. i18n: file socksbase.ui line 207
#: rc.cpp:536
#, no-c-format
msgid "This is the list of additional paths that will be searched."
msgstr "這是會被搜尋的額外路徑清單。"
#. i18n: file socksbase.ui line 251
#: rc.cpp:539
#, no-c-format
msgid "&Add"
msgstr "增加(&A)"
#. i18n: file socksbase.ui line 299
#: rc.cpp:545
#, no-c-format
msgid "&Test"
msgstr "測試(&T)"
#. i18n: file socksbase.ui line 302
#: rc.cpp:548
#, no-c-format
msgid "Click here to test SOCKS support."
msgstr "按這裡以測試 SOCKS 支援。"
#. i18n: file uagentproviderdlg_ui.ui line 32
#: rc.cpp:551
#, no-c-format
msgid "&When browsing the following site:"
msgstr "當瀏覽下列網址時(&W):"
#. i18n: file uagentproviderdlg_ui.ui line 41
#: rc.cpp:554 rc.cpp:560
#, no-c-format
msgid ""
"<qt>\n"
"Enter the site or domain name where a fake browser identification should be "
"used."
"<p>\n"
"<u>NOTE:</u> Wildcard syntax such as \\\"*,?\\\" is NOT allowed: instead, use "
"the top level address of a site to make generic matches; for example, if you "
"want all TDE sites to receive a fake browser identification, you would enter "
"<code>.kde.org</code> - the fake identity would then be sent to any TDE site "
"that ends with <code>.kde.org</code>.\n"
"</qt>"
msgstr ""
"<qt>\n"
"請輸入您想使用偽裝識別碼的網址或網域。"
"<p>\n"
"<u>請注意:</u>您不可以使用萬用字元,如「*,?」。請輸入最頂層的網址讓所有在它之下找到的網址歸成一類;例如,若您要所有 TDE "
"網站都收到偽裝識別碼,您要輸入 <code>.kde.org</code> - 偽裝識別碼就會送到任何以 <code>.kde.org</code> "
"結尾的 TDE 網站。\n"
"</qt>"
#. i18n: file uagentproviderdlg_ui.ui line 60
#: rc.cpp:566
#, no-c-format
msgid "&Use the following identification:"
msgstr "使用下列識別碼(&U):"
#. i18n: file uagentproviderdlg_ui.ui line 68
#: rc.cpp:569 rc.cpp:574
#, no-c-format
msgid ""
"<qt>\n"
"Select the browser identification to use whenever contacting the site you "
"specified above.\n"
"</qt>"
msgstr ""
"<qt>\n"
"選擇連結您在上面指定的網址或網域之瀏覽器識別碼。\n"
"</qt>"
#. i18n: file uagentproviderdlg_ui.ui line 86
#: rc.cpp:579
#, no-c-format
msgid "Real identification:"
msgstr "真實的識別"
#. i18n: file uagentproviderdlg_ui.ui line 94
#: rc.cpp:582 rc.cpp:587
#, no-c-format
msgid ""
"<qt>\n"
"The actual browser identification text that will be sent to the remote "
"machine.\n"
"</qt>"
msgstr ""
"<qt>\n"
"這個瀏覽器資訊會被送給遠端機器。\n"
"</qt>"
#. i18n: file useragentdlg_ui.ui line 19
#: rc.cpp:598
#, no-c-format
msgid ""
"<qt>\n"
"Here you can modify the default browser-identification text or set a site <code>"
"(eg. www.kde.org)</code> or a domain <code>(eg. kde.org)</code> "
"specific identification text."
"<p>\n"
"To add a new site specific identification text, click the <code>New</code> "
"button and supply the necessary information. To change an existing site "
"specific entry, click on the <code>Change</code> button. The <code>Delete</code> "
"button will remove the selected site specific identification text, causing the "
"setting to be used for that site or domain.\n"
"</qt>"
msgstr ""
"<qt>\n"
"您可以在這邊修改網站<code>(如www.kde.org)</code>或網域<code>(如kde.org)</code>的預設瀏覽器識別碼。"
"<p>\n"
"要增加新的特定網站識別文字,只要單擊 <code>新增</code>按鈕,並提供對話窗中所需的資訊。要變更一個現存的網站識別項目,單擊 <code>"
"變更</code>按鈕。<code>刪除</code>按鈕將會移除您所選擇的特定網站識別文字,並將預設的設定使用於該網站或網域。\n"
"</qt>"
#. i18n: file useragentdlg_ui.ui line 33
#: rc.cpp:604
#, no-c-format
msgid "&Send identification"
msgstr "送出識別字串(&S)"
#. i18n: file useragentdlg_ui.ui line 43
#: rc.cpp:607
#, no-c-format
msgid ""
"<qt>\n"
"Send the browser identification to web sites."
"<p>\n"
"<u>NOTE:</u> Many sites rely on this information to display pages properly, "
"hence, it is highly recommended that you do not totally disable this feature "
"but rather customize it."
"<p>\n"
"By default, only minimal identification information is sent to remote sites. "
"The identification text that will be sent is shown below.\n"
"</qt>"
msgstr ""
"<qt>\n"
"送出瀏覽器識別碼給網站。"
"<p>\n"
"<u>注意:</u>許多網站需要這類訊息來使得網頁能正常顯示,因此強烈地建議您不要關掉所有的選項,但您可以自行設定。"
"<p>\n"
"預設的情況,只有最少的識別碼資訊會送至遠端網站。要送出的識別文字會顯示在下面。\n"
"</qt>"
#. i18n: file useragentdlg_ui.ui line 54
#: rc.cpp:614
#, no-c-format
msgid "Default Identification"
msgstr "預設的識別碼"
#. i18n: file useragentdlg_ui.ui line 57
#: rc.cpp:617
#, no-c-format
msgid ""
"The browser identification text sent to the sites you visit. Use the provided "
"options to customize it."
msgstr "將瀏覽器資訊送給瀏覽的網站。你可以使用提供的選項來自訂。"
#. i18n: file useragentdlg_ui.ui line 88
#: rc.cpp:620
#, no-c-format
msgid ""
"The browser identification text sent to the sites you visit. You can customize "
"it using the options provided below."
msgstr "這是在瀏覽時將送至遠端網站之瀏覽器識別碼。您可以利用下列選項自訂它。"
#. i18n: file useragentdlg_ui.ui line 96
#: rc.cpp:623
#, no-c-format
msgid "Add operating s&ystem name"
msgstr "新增作業系統名稱(&Y)"
#. i18n: file useragentdlg_ui.ui line 99
#: rc.cpp:626
#, no-c-format
msgid ""
"Includes your operating system's name in the browser identification text."
msgstr "在瀏覽器識別碼中包含您的作業系統名稱。"
#. i18n: file useragentdlg_ui.ui line 135
#: rc.cpp:629
#, no-c-format
msgid "Add operating system &version"
msgstr "新增作業系統版本(&V)"
#. i18n: file useragentdlg_ui.ui line 138
#: rc.cpp:632
#, no-c-format
msgid ""
"Includes your operating system's version number in the browser identification "
"text."
msgstr "在瀏覽器識別碼中包含您的作業系統版本。"
#. i18n: file useragentdlg_ui.ui line 148
#: rc.cpp:635
#, no-c-format
msgid "Add &platform name"
msgstr "新增平台名稱(&P)"
#. i18n: file useragentdlg_ui.ui line 151
#: rc.cpp:638
#, no-c-format
msgid "Includes your platform type in the browser identification text"
msgstr "在瀏覽器識別碼中包含您的平台類型。"
#. i18n: file useragentdlg_ui.ui line 159
#: rc.cpp:641
#, no-c-format
msgid "Add &machine (processor) type"
msgstr "新增機器(處理器)型號(&M)"
#. i18n: file useragentdlg_ui.ui line 162
#: rc.cpp:644
#, no-c-format
msgid "Includes your machine's CPU type in the browser identification text."
msgstr "在瀏覽器識別碼中包含您的電腦 CPU 類型。"
#. i18n: file useragentdlg_ui.ui line 170
#: rc.cpp:647
#, no-c-format
msgid "Add lang&uage information"
msgstr "加入語言資訊(&U)"
#. i18n: file useragentdlg_ui.ui line 173
#: rc.cpp:650
#, no-c-format
msgid "Includes your language settings in the browser identification text."
msgstr "在瀏覽器識別碼中包含您的語言設定。"
#. i18n: file useragentdlg_ui.ui line 186
#: rc.cpp:653
#, no-c-format
msgid "Site Specific Identification"
msgstr "特定網站識別碼"
#. i18n: file useragentdlg_ui.ui line 198
#: rc.cpp:656
#, no-c-format
msgid "Site Name"
msgstr "網站名稱"
#. i18n: file useragentdlg_ui.ui line 209
#: rc.cpp:659
#, no-c-format
msgid "Identification"
msgstr "識別"
#. i18n: file useragentdlg_ui.ui line 220
#: rc.cpp:662
#, no-c-format
msgid "User Agent"
msgstr "使用者代理"
#. i18n: file useragentdlg_ui.ui line 248
#: rc.cpp:665
#, no-c-format
msgid ""
"List of sites for which the specified identification text will be used instead "
"of the default one."
msgstr "對於這些網站,一個指定的瀏覽器資訊會被送出,而不是預設的瀏覽器。"
#. i18n: file useragentdlg_ui.ui line 267
#: rc.cpp:671
#, no-c-format
msgid "Add new identification text for a site."
msgstr "新增特定網站的識別碼。"
#. i18n: file useragentdlg_ui.ui line 278
#: rc.cpp:677
#, no-c-format
msgid "Change the selected identifier text."
msgstr "改變選擇的識別碼。"
#. i18n: file useragentdlg_ui.ui line 289
#: rc.cpp:683
#, no-c-format
msgid "Delete the selected identifier text."
msgstr "刪除選擇的識別碼。"
#. i18n: file useragentdlg_ui.ui line 300
#: rc.cpp:689
#, no-c-format
msgid "Delete all identifiers."
msgstr "等等等等刪除全部的識別碼。"
#. i18n: file kio_ftprc.kcfg line 10
#: rc.cpp:692
#, no-c-format
msgid "Disable Passive FTP"
msgstr "停用被動 FTP"
#. i18n: file kio_ftprc.kcfg line 11
#: rc.cpp:695
#, no-c-format
msgid ""
"When FTP connections are passive the client connects to the server, instead of "
"the other way round, so firewalls do not block the connection; old FTP servers "
"may not support Passive FTP though."
msgstr "當 FTP 連線是客戶端以被動連線到伺服器,而非其他方式,防火牆將不會阻擋該連線;舊式 FTP 伺服器可能不支援被動 FTP 通行。"
#. i18n: file kio_ftprc.kcfg line 16
#: rc.cpp:698
#, no-c-format
msgid "Mark partially uploaded files"
msgstr "標記部分上傳的檔案"
#. i18n: file kio_ftprc.kcfg line 17
#: rc.cpp:701
#, no-c-format
msgid ""
"While a file is being uploaded its extension is \".part\". When fully uploaded "
"it is renamed to its real name."
msgstr "當檔案開始上傳時為它加上延伸檔名「.part」。當檔案完整的上傳時將它的名稱改變為真實名稱。"
#: smbrodlg.cpp:43
msgid "This is the configuration for the samba client only, not the server."
msgstr "這只是用於 samba 客戶端的設定,而非伺服器。"
#: smbrodlg.cpp:47
msgid "Default user name:"
msgstr "預設使用者名稱:"
#: smbrodlg.cpp:53
msgid "Default password:"
msgstr "預設密碼:"
#: smbrodlg.cpp:171
msgid ""
"<h1>Windows Shares</h1>Konqueror is able to access shared windows filesystems "
"if properly configured. If there is a specific computer from which you want to "
"browse, fill in the <em>Browse server</em> field. This is mandatory if you do "
"not run Samba locally. The <em>Broadcast address</em> and <em>WINS address</em> "
"fields will also be available, if you use the native code, or the location of "
"the 'smb.conf' file from which the options are read, when using Samba. In any "
"case, the broadcast address (interfaces in smb.conf) must be set up if it is "
"guessed incorrectly or you have multiple cards. A WINS server usually improves "
"performance, and reduces the network load a lot."
"<p>The bindings are used to assign a default user for a given server, possibly "
"with the corresponding password, or for accessing specific shares. If you "
"choose to, new bindings will be created for logins and shares accessed during "
"browsing. You can edit all of them from here. Passwords will be stored locally, "
"and scrambled so as to render them unreadable to the human eye. For security "
"reasons, you may not want to do that, as entries with passwords are clearly "
"indicated as such."
"<p>"
msgstr ""
"<h1> Windows 資源</h1>Konqueror 可以存取視窗檔案系統的資源。如果有指定要瀏覽的電腦,請將之填入 <em>瀏覽伺服器</em> "
"欄位中。如果您沒有在本地端執行 Samba 時,這是必要的。<em>廣播位址</em> 與 <em>WINS 位址</em> "
"欄位在您要使用原生碼時是可用的,或是在使用 Samba 時由 smb.conf 中取得選項。在任一種狀況,瀏覽器位址 (smb.conf 中的介面) "
"在猜測錯誤或您有多張網路介面時是必須指定的。WINS 伺服器通常可以增進效能,並且有效減少網路負載。"
"<p>連結使用於指定特定伺服器的預設使用者,可能對應到密碼或存取指定的資源。如果您選擇這樣,新的連結將會為登入與資源而在瀏覽時建立。您可以在這邊編輯它們。密碼是"
"儲存在本地端的,並且經過編碼使它無法被讀取。基於安全因素,您可能要注意之。包含密碼的項目將會清楚的指示。"
"<p>"
#: socks.cpp:42
msgid "kcmsocks"
msgstr "kcmsocks"
#: socks.cpp:42
msgid "TDE SOCKS Control Module"
msgstr "TDE SOCKS 控制模組"
#: socks.cpp:44
msgid "(c) 2001 George Staikos"
msgstr "(c) 2001 George Staikos"
#: socks.cpp:92
msgid "These changes will only apply to newly started applications."
msgstr "這些變更將只會套用到新啟動的應用程式。"
#: socks.cpp:94 socks.cpp:127 socks.cpp:132
msgid "SOCKS Support"
msgstr "SOCKS 支援"
#: socks.cpp:126
msgid "Success: SOCKS was found and initialized."
msgstr "成功:找到並初始化 SOCKS 。"
#: socks.cpp:131
msgid "SOCKS could not be loaded."
msgstr "無法載入 SOCKS 。"
#: socks.cpp:270
msgid ""
"<h1>SOCKS</h1>"
"<p>This module allows you to configure TDE support for a SOCKS server or "
"proxy.</p>"
"<p>SOCKS is a protocol to traverse firewalls as described in <a "
"href=\"http://rfc.net/rfc1928.html\">RFC 1928</a>. "
"<p>If you have no idea what this is and if your system administrator does not "
"tell you to use it, leave it disabled.</p>"
msgstr ""
"<h1>SOCKS</h1>"
"<p>這個模組允許您設定 TDE 對 SOCKS 伺服器或代理伺服器的支援。</p>"
"<p>SOCKS 是用來穿過防火牆的協定,正如 <a href=\"http://rfc.net/rfc1928.html\">RFC 1928</a> "
"所述。"
"<p>如果您不知道這是什麼或您的系統管理者沒有要您使用它,請讓它保持停用。</p>"
#: useragentdlg.cpp:225
msgid ""
"<qt>"
"<center>Found an existing identification for"
"<br/><b>%1</b>"
"<br/>Do you want to replace it?</center></qt>"
msgstr "<qt><center>找到既存之關於<br/><b>%1</b><br/>的識別碼,您是否要置換它?</center></qt>"
#: useragentdlg.cpp:230
msgid "Duplicate Identification"
msgstr "重複的識別"
#: useragentdlg.cpp:248
msgid "Add Identification"
msgstr "新增識別"
#: useragentdlg.cpp:267
msgid "Modify Identification"
msgstr "修改識別"
#: useragentdlg.cpp:383
msgid ""
"<h1>Browser Identification</h1> The browser-identification module allows you to "
"have full control over how Konqueror will identify itself to web sites you "
"browse.<P>This ability to fake identification is necessary because some web "
"sites do not display properly when they detect that they are not talking to "
"current versions of either Netscape Navigator or Internet Explorer, even if the "
"browser actually supports all the necessary features to render those pages "
"properly. For such sites, you can use this feature to try to browse them. "
"Please understand that this might not always work, since such sites might be "
"using non-standard web protocols and or specifications.<P><u>NOTE:</u> "
"To obtain specific help on a particular section of the dialog box, simply click "
"on the quick help button on the window title bar, then click on the section for "
"which you are seeking help."
msgstr ""
"<h1>瀏覽器識別碼</h1> 瀏覽器識別碼控制視窗提供您來控制 Konqueror 回報遠端網站的資訊。"
"<p> 這項功能提供了必要的偽裝的識別碼這是因為某些網站在未能偵測到Netscape Navigator 或 Internet Explorer "
"時無法正常顯示,即使這些「未支援的瀏覽器」實際上支援必須的功能並能正常的顯示。因此您必須更改預設的瀏覽器識別碼來瀏覽這些網站"
"<p><u>注意:</u>要獲得對話盒特定部分的說明,只要按下視窗標題列的快速說明按鈕,然後按下您想求助的段落。"
#~ msgid "MS Windows encoding:"
#~ msgstr "MS Windows 編碼:"