You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tde-i18n/tde-i18n-zh_TW/messages/tdewebdev/quanta.po

14514 lines
371 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# translation of quanta.po to Chinese Traditional
# traditional Chinese translation of quanta.
# Stanley Wong<stanley18fan0k@yahoo.com.hk>, 2005-2006.
#
msgid ""
msgstr ""
"Project-Id-Version: quanta\n"
"POT-Creation-Date: 2008-07-08 01:25+0200\n"
"PO-Revision-Date: 2006-08-01 22:34+0800 \n"
"Last-Translator: Stanley Wong <stanley18fan0k@yahoo.com.hk>\n"
"Language-Team: Chinese (Traditional) <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. i18n: file ./dialogs/fourbuttonmessagebox.ui line 74
#: rc.cpp:6
#, no-c-format
msgid "Save &As..."
msgstr "另存為(&A)..."
#. i18n: file ./dialogs/fourbuttonmessagebox.ui line 90
#: rc.cpp:9
#, no-c-format
msgid "&Do Not Save"
msgstr "不儲存(&D)"
#. i18n: file ./dialogs/dirtydialog.ui line 39
#: dialogs/dirtydlg.cpp:37 rc.cpp:15
#, no-c-format
msgid "File Changed"
msgstr "檔案已變更"
#. i18n: file ./dialogs/dirtydialog.ui line 58
#: rc.cpp:18
#, no-c-format
msgid "The file was changed outside of the Quanta editor."
msgstr "這個檔案已在 Quanta 外部被更改"
#. i18n: file ./dialogs/dirtydialog.ui line 66
#: rc.cpp:21
#, no-c-format
msgid " How Do You Want to Proceed?"
msgstr " 您希望如何繼續下去?"
#. i18n: file ./dialogs/dirtydialog.ui line 83
#: rc.cpp:24
#, no-c-format
msgid "&Do not load the modified version from disk"
msgstr "不要載入磁碟中已修改的版本(&D)"
#. i18n: file ./dialogs/dirtydialog.ui line 91
#: rc.cpp:27
#, no-c-format
msgid "&Use the version from disk (will lose the current content)"
msgstr "使用磁碟中的版本(目前的內容將會消失)(&U)"
#. i18n: file ./dialogs/dirtydialog.ui line 107
#: rc.cpp:30
#, no-c-format
msgid "(If you later save the document, you will lose what was on the disk.)"
msgstr "(如果您稍後儲存文件,磁碟中的版本會消失。)"
#. i18n: file ./dialogs/dirtydialog.ui line 135
#: rc.cpp:33
#, no-c-format
msgid "&Compare the two versions and load the result"
msgstr "比對兩個版本並載入比對結果(&C)"
#. i18n: file ./dialogs/dirtydialog.ui line 141
#: rc.cpp:36
#, no-c-format
msgid "Use Kompare if available. Otherwise this checkbox is disabled."
msgstr "可以的話使用 Kompare。否則這個選項會被停用。"
#. i18n: file ./dialogs/tagdialogs/tagmail.ui line 27
#: rc.cpp:39
#, no-c-format
msgid "Email address:"
msgstr "電子郵件地址:"
#. i18n: file ./dialogs/tagdialogs/tagmail.ui line 49
#: dialogs/filecombo.cpp:45 dialogs/filecombo.cpp:67
#: dialogs/tagdialogs/tagimgdlgdata.cpp:34
#: dialogs/tagdialogs/tagimgdlgdata.cpp:67 rc.cpp:42 rc.cpp:2518 rc.cpp:2640
#: rc.cpp:2901 rc.cpp:2907 rc.cpp:2910 rc.cpp:2988 rc.cpp:2991
#, no-c-format
msgid "..."
msgstr "..."
#. i18n: file ./dialogs/tagdialogs/tagmail.ui line 67
#: rc.cpp:45
#, no-c-format
msgid "Subject:"
msgstr "主題:"
#. i18n: file ./dialogs/tagdialogs/tagmail.ui line 83
#: rc.cpp:48 rc.cpp:1029 rc.cpp:1105 rc.cpp:1111 rc.cpp:1123 rc.cpp:1138
#: rc.cpp:1683 rc.cpp:4143
#, no-c-format
msgid "Title:"
msgstr "標題:"
#. i18n: file ./dialogs/tagdialogs/tagmisc.ui line 31
#: dialogs/tagdialogs/tagmiscdlg.cpp:23 rc.cpp:57
#, no-c-format
msgid "Misc. Tag"
msgstr "其他標籤"
#. i18n: file ./dialogs/tagdialogs/tagmisc.ui line 47
#: rc.cpp:60
#, no-c-format
msgid "Element name:"
msgstr "元素名稱:"
#. i18n: file ./dialogs/tagdialogs/tagmisc.ui line 55
#: rc.cpp:63
#, no-c-format
msgid "&Add closing tag"
msgstr "加上結束標籤(&A)"
#. i18n: file ./dialogs/debuggeroptionss.ui line 44
#: rc.cpp:66
#, no-c-format
msgid "Enable debugger"
msgstr "啟動除錯器"
#. i18n: file ./dialogs/debuggeroptionss.ui line 80
#: rc.cpp:69
#, no-c-format
msgid "PHP3 listener"
msgstr "PHP3 監聽程式"
#. i18n: file ./dialogs/debuggeroptionss.ui line 88
#: rc.cpp:72
#, no-c-format
msgid "PHP4 debugger"
msgstr "PHP4 除錯器"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 27
#: rc.cpp:75
#, no-c-format
msgid "Configure Actions"
msgstr "設定動作"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 56
#: rc.cpp:78
#, no-c-format
msgid "&Delete Action"
msgstr "刪除動作(&D)"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 64
#: rc.cpp:81
#, no-c-format
msgid "&New Action"
msgstr "新的動作(&N)"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 117
#: rc.cpp:84
#, no-c-format
msgid "Toolbar & Action Tree"
msgstr "工具列 & 動作樹狀列表"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 123
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:221
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:227
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:233
#: ../lib/compatibility/knewstuff/providerdialog.cpp:65
#: components/debugger/variableslistview.cpp:54 parts/kafka/domtreeview.cpp:34
#: parts/kafka/htmldocumentproperties.cpp:88 parts/kafka/wkafkapart.cpp:75
#: rc.cpp:87 rc.cpp:2548 rc.cpp:2784 treeviews/doctreeview.cpp:50
#: treeviews/structtreeview.cpp:84 treeviews/uploadtreeview.cpp:35
#, no-c-format
msgid "Name"
msgstr "名稱"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 134
#: rc.cpp:90 rc.cpp:117
#, no-c-format
msgid "Shortcut"
msgstr "捷徑"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 236
#: rc.cpp:102
#, no-c-format
msgid "Action Properties"
msgstr "動作屬性"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 247
#: rc.cpp:105 rc.cpp:611 rc.cpp:1502 rc.cpp:2778
#, no-c-format
msgid "&Add..."
msgstr "加入(&A)..."
#. i18n: file ./dialogs/actionconfigdialogs.ui line 280
#: rc.cpp:111
#, no-c-format
msgid "Tool &tip:"
msgstr "工具提示(&T):"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 296
#: rc.cpp:114
#, no-c-format
msgid "Te&xt:"
msgstr "文字(&X):"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 354
#: rc.cpp:120
#, no-c-format
msgid "C&ustom"
msgstr "自訂(&U)..."
#. i18n: file ./dialogs/actionconfigdialogs.ui line 365
#: dialogs/actionconfigdialog.cpp:320 dialogs/tagdialogs/colorcombo.cpp:220
#: rc.cpp:123 rc.cpp:159 rc.cpp:171 rc.cpp:189 rc.cpp:2527
#, no-c-format
msgid "None"
msgstr "無"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 373
#: rc.cpp:126 rc.cpp:2691 rc.cpp:2829
#, no-c-format
msgid "&None"
msgstr "無(&N)"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 391
#: rc.cpp:129
#, no-c-format
msgid "Container toolbars:"
msgstr "包含工具列:"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 397
#: rc.cpp:132 src/quantadoc.cpp:84 src/quantadoc.cpp:369
#, no-c-format
msgid "Tag"
msgstr "標籤"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 402
#: rc.cpp:135 rc.cpp:3737
#, no-c-format
msgid "Script"
msgstr "指令稿"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 407
#: rc.cpp:138 rc.cpp:427 rc.cpp:719
#, no-c-format
msgid "Text"
msgstr "文字"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 427
#: rc.cpp:141
#, no-c-format
msgid "T&ype:"
msgstr "類型(&Y)"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 438
#: rc.cpp:144
#, no-c-format
msgid "Detailed Settings"
msgstr "詳細設定"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 464
#: rc.cpp:147
#, no-c-format
msgid "<tag> :"
msgstr "<tag> :"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 482
#: rc.cpp:150
#, no-c-format
msgid "</tag> :"
msgstr "</tag> :"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 493
#: rc.cpp:153
#, no-c-format
msgid "Run \"Edit tag\" dialog if available"
msgstr "可以的話執行 \"編輯標籤\" 對話盒"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 544
#: rc.cpp:156
#, no-c-format
msgid "&Input:"
msgstr "輸入(&I)"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 558
#: rc.cpp:162
#, no-c-format
msgid "Current Document"
msgstr "目前的文件"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 563
#: rc.cpp:165
#, no-c-format
msgid "Selected Text"
msgstr "選擇的文字"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 591
#: rc.cpp:168
#, no-c-format
msgid "&Output:"
msgstr "輸出(&O)"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 605
#: rc.cpp:174
#, no-c-format
msgid "Insert in Cursor Position"
msgstr "於游標位置插入"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 610
#: rc.cpp:177
#, no-c-format
msgid "Replace Selection"
msgstr "取代選擇區域"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 615
#: rc.cpp:180
#, no-c-format
msgid "Replace Current Document"
msgstr "取代目前的文件"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 620
#: rc.cpp:183
#, no-c-format
msgid "Create New Document"
msgstr "建立新的文件"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 625
#: rc.cpp:186
#, no-c-format
msgid "Message Window"
msgstr "訊息視窗"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 651
#: rc.cpp:192
#, no-c-format
msgid "Insert in cursor position"
msgstr "於游標位置插入"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 656
#: rc.cpp:195
#, no-c-format
msgid "Replace selection"
msgstr "取代選擇區域"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 661
#: rc.cpp:198
#, no-c-format
msgid "Replace current document"
msgstr "取代目前的文件"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 666
#: rc.cpp:201
#, no-c-format
msgid "Create a new document"
msgstr "建立一份新的文件"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 671
#: rc.cpp:204
#, no-c-format
msgid "Message window"
msgstr "訊息視窗"
#. i18n: file ./dialogs/actionconfigdialogs.ui line 702
#: rc.cpp:207
#, no-c-format
msgid "&Error:"
msgstr "錯誤(&E)"
#. i18n: file ./dialogs/donationdialog.ui line 33
#: rc.cpp:210
#, no-c-format
msgid "Support Quanta with Financial Donation"
msgstr "以捐款支持 Quanta"
#. i18n: file ./dialogs/donationdialog.ui line 76
#: rc.cpp:216
#, fuzzy, no-c-format
msgid ""
"<div align=\"center\">"
"<h2>Your Contribution Can Make a Difference</h2></div>"
"&nbsp;&nbsp;&nbsp;Quanta Plus would not be what it is today without sponsored "
"developers. Andras Mantia has been full time since mid 2002 and Michal Rudolf "
"came on part time in spring of 2004. Over the life of the project development "
"has been largely sponsored by the efforts of the Project Manager, Eric Laffoon. "
"In addition to his minimum 10-20 hour a week time commitment, his company, <a "
"href=\"http://kittyhooch.com\" target=\"_blank\">Kitty Hooch</a> "
"LLP has an ongoing financial commitment to keep Quanta in continuous "
"development. Our sponsored developers are also a catalyst to our volunteer "
"developers.\n"
"<br>&nbsp;&nbsp;&nbsp;&nbsp;Kitty Hooch is a small company with no employees, 2 "
"active partners and several contract workers. After test marketing in the fall "
"of 2001 they began wholesale and retail to national and international markets "
"in early 2002. Kitty Hooch controls all aspects of their product production and "
"marketing. Quanta sponsorship is no small expense for a small start up company. "
"In 2003 cash flow and a bout with typhoid fever left Eric in debt and unable to "
"keep up payments to Andras without help from the community. Thankfully a number "
"of people stepped up. We now have several large sponsors along with a number of "
"generous contributors. This has enabled us to bring Michal on part time. Now we "
"are looking to be able to move him to full time. The challenge for this project "
"to assume a leading role as a \"killer desktop application\" is great.\n"
"<div align=\"center\">"
"<h3>Balancing open source ideals and fiscal\n"
"reality</h3></div>\n"
"&nbsp;&nbsp;&nbsp;&nbsp;We believe that the open source model\n"
"is the future of software, but it is no guarantee of success. How many open "
"source projects that we had high hopes for are unmaintained today? In early "
"2002 many people thought that Quanta Plus was dead. One person, Eric Laffoon, "
"was not about to let the dream die. Quanta is more than surviving now, but "
"developing a best-in-class tool is no easy task. We believe the key is "
"consistent momentum. Nothing ensures this better than programmers who can work "
"without financial or time distractions. Why do you think OSS projects die?"
"<br>&nbsp;&nbsp;&nbsp;&nbsp;As Quanta grows the project management demands are "
"increasing and ironically impacting the revenue stream it requires to continue. "
"The impact of our sponsored developers has been huge! We are looking to make "
"Quanta grow even faster. Eric needs to be able to free even more time to bring "
"several new and exciting ideas through coding to release. We have other "
"expenses too, with conferences and keeping our systems up to date so we don't "
"lose time fighting old hardware. <i>We want to make Quanta the best web tool "
"anywhere!</i>. This will require a nucleus of active core developers. We hope "
"professional developers and companies using Quanta will help us to reach our "
"goals with sponsorship donations that will relieve financial stresses.\n"
"<div align=\"center\">"
"<h3>Could Quanta die without your support?</h3></div>"
"&nbsp;&nbsp;&nbsp;&nbsp;We'd like to think not! But from February 2001 to June "
"2002 there was very little activity and many months with no work done at all. "
"This came about because of cash flow problems which led to the original "
"developers leaving to do a commercial project. The fact remains that our most "
"productive volunteer developers, as much as we think they're wonderful, go long "
"periods where they just can't make time to code on the project. We estimate our "
"active users number well over a million, yet we have only a few dozen people a "
"year supporting the project. In fact 3-4 people account for over half of our "
"current support. Clearly the actions of a few people make a huge difference, "
"and yours can make a difference too.\n"
"<br><div align=\"center\">"
"<h3>Will you help make a difference?</h3></div>\n"
"&nbsp;&nbsp;&nbsp;&nbsp;If you wish to donate through PayPal\n"
"(online money transfer or credit card), visit our <a "
"href=\"http://tdewebdev.org/donate.php\">donation page</a>.\n"
"<br>&nbsp;&nbsp;&nbsp;&nbsp;If you are outside the PayPal area or wish to "
"discuss corporate sponsorship contact the project manager:"
"<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Eric Laffoon, <a "
"href=\"mailto:sequitur@kde.org?subject=Quanta%20sponsorship%20inquiry\">"
"sequitur@kde.org</a>"
msgstr ""
"<div align=\"center\">"
"<h2>您的捐獻足以影響一切</h2></div>&nbsp;&nbsp;&nbsp;沒有一群熱心的贊助工程師Quanta Plus 就不會有今天的成就:自 "
"2002 年中 Andras Mantia 就開始全職開發 Quanta PlusMichal Rudolf 在 2004 "
"年春天以兼職身份加入開發行列;主管 Eric Laffoon 還是奉獻得最多的人:他除了每星期最少花 10-20 小時工作,還不斷在開設的公司 <a "
"href=\"http://kittyhooch.com\" target=\"_blank\">Kitty Hooch</a> "
"LLP 撥款贊助我們,令 Quanta 可以持續發展。另一方面,我們這些受贊助的工程師也可以促使志願開發人員做得更好。\n"
"<br>&nbsp;&nbsp;&nbsp;&nbsp;Kitty Hooch 是一間小公司,目前還沒有員工,只有兩個合夥人和幾個合約工人。它在 2001 "
"年秋天進行市場測試後,就於 2002 年上旬開拓國內外的批發零售市場。對於產品的製造和銷售Kitty Hooch 都全權負責,因此資助 Quanta "
"對這間剛剛起步的公司來說不是一筆小數目。2003 年,公司的資金週轉問題令 Eric 無法支付 Andras "
"的酬金。幸好當時社群沒有袖手旁觀慷慨解囊真是非常感謝隨著更多人了解到資金的問題捐助者的數目也不斷上升。到了現在Quanta "
"已經擁有一大群慷慨的贊助者了,使我們可以資助 Michal 兼職開發,贊助他全職開發也是我們的目標之一。而我們的最終目標,是成為殺手級的桌面應用程式。\n"
"<div align=\"center\">"
"<h3>在開放源碼的理想世界與金錢至上的現實生活\n"
"之間取得平衡</h3></div>\n"
"&nbsp;&nbsp;&nbsp;&nbsp;我們確信未來的軟體開發是開放源碼的世界,但是沒人敢保證這樣做會一定成功的:許多開源計劃都被寄予厚望,可是今天還有"
"人維護的剩下多少個呢2002 初,人們都認為 Quanta Plus 完了,只有 Eric Laffoon 盡自己的能力拯救這個夢想。雖然現在 Quanta "
"已復活過來還滿有生命力但要維護這個頂級的程式並非易事。那麼Quanta "
"是如何做到的呢?我們認為成功的秘訣,是持續不斷的熱情和動力。只要消除了時間和金錢上的問題,工程師就可以全情投入。這樣,您為什麼認為開源計劃活不下去呢?"
"<br>&nbsp;&nbsp;&nbsp;&nbsp;Quanta "
"的發展也帶來一個難題:它愈來愈難管理,意味著我們需要更多時間和經濟上的支持。贊助工程師在此的影響甚大!我們希望 Quanta 可以發展得更快。Eric "
"需要更多的時間發揮他的想像力,把更多刺激的新主意加入去。我們也有其他的開支的:我們需要開會討論,也需要更換古老設備,節省寶貴時間。<i>"
"我們的目標是使 Quanta 成為網頁工具的王者!</i>我們需要一群充滿活力的開發成員。我們希望使用 Quanta "
"的專業人士和公司能夠贊助我們,讓這目標可以得到實現。\n"
"<div align=\"center\">"
"<h3>沒有您們的支持Quanta "
"可以自食其力嗎?</h3></div>&nbsp;&nbsp;&nbsp;&nbsp;我們也希望可以但是在2001年2月至次年6月期間Quanta "
"的程式碼幾乎無人動過!這是因為資金的問題,導致一些原來的工程師離開了我們,從事另一些商業計劃。我們的志願工程師的情況也差不多:雖然他們的貢獻非常多,但總會有時候"
"終年不見人影。至於用戶支援方面,我們估計使用者的數目至少有一百萬,但提供支援的人們一年內只有十幾個。換句話說,社群中 3-4 "
"個人已經負責著大半的支援了。這些充份表現了關鍵小數的重要性,而您的支持也是一樣的!\n"
"<br><div align=\"center\">"
"<h3>您會幫助我們嗎?</h3></div>\n"
"&nbsp;&nbsp;&nbsp;&nbsp;如果您希望通過 PayPal 捐助\n"
"(線上交易或信用卡), 請到訪我們的<a "
"href=\"http://quanta.sourceforge.net/main1.php?actfile=donate\">捐助網頁</a>.\n"
"<br>&nbsp;&nbsp;&nbsp;&nbsp;如果您不使用 PayPal 或想談論一下贊助方面的事情,請聯絡計劃的負責人:"
"<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Eric Laffoon, <a "
"href=\"mailto:sequitur@kde.org?subject=Quanta%20sponsorship%20inquiry\">"
"sequitur@kde.org</a>"
#. i18n: file ./dialogs/donationdialog.ui line 136
#: rc.cpp:229
#, no-c-format
msgid ""
"<a href=\"http://tdewebdev.org/donate.php\">Donate</a> through PayPal now."
msgstr "現在就從 PayPal <a href=\"http://tdewebdev.org/donate.php\">捐獻</a>。"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 25
#: rc.cpp:232
#, no-c-format
msgid "Structure Group Editor"
msgstr "結構組別編輯器"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 36
#: rc.cpp:235 rc.cpp:2643 rc.cpp:2751
#, no-c-format
msgid "&Name:"
msgstr "名稱(&N)"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 47
#: rc.cpp:238
#, no-c-format
msgid "The name of the group"
msgstr "組別的名稱"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 50
#: rc.cpp:241
#, no-c-format
msgid ""
"The user visible name of the group. It will be shown in the structure tree as a "
"top node when there are elements belonging to this group in the document."
msgstr "顯示的組別名稱。如果文件中有著這個組別的元素,結構樹狀的最上層(top node)就會顯示這個名稱。"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 58
#: rc.cpp:244
#, no-c-format
msgid "&Icon:"
msgstr "圖示(&I)"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 103
#: rc.cpp:247
#, no-c-format
msgid "Filen&ame definition:"
msgstr "檔案名稱定義(&A):"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 109
#: rc.cpp:250 rc.cpp:262
#, no-c-format
msgid "Regular expression to get the filename"
msgstr "檔案名稱對應的正規表示式"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 112
#: rc.cpp:253 rc.cpp:265
#, no-c-format
msgid ""
"Regular expression to get the filename. The expression is used to <b>remove</b> "
"the unnecessary strings from the element's text."
msgstr "對應檔案名稱的正規表示式。它是用來<b>移除</b>元素文字中多餘的字串的。"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 120
#: rc.cpp:256
#, no-c-format
msgid "Contains a &filename"
msgstr "包含一個檔案名稱(&F)"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 123
#: rc.cpp:259
#, no-c-format
msgid "True if the element's text contains a filename"
msgstr "若元素的文字包含檔案名稱,就為真"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 145
#: rc.cpp:268
#, no-c-format
msgid "&Tag:"
msgstr "標籤(&T)"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 151
#: rc.cpp:271
#, no-c-format
msgid "Elements identified by this entry will belong to this group"
msgstr "這個項目辨識到的元素將會屬於這個組別"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 154
#: rc.cpp:274 rc.cpp:295
#, no-c-format
msgid ""
"Defines which tags belong to this group. The format is <i>"
"tagname(attribute1, attribute2, ...)</i>. Tags with name <i>tagname</i> "
"will appear under this group. The item text of the corresponding node in the "
"tree will be <i>attribute1_value | attribute2_value | ...</i>"
"Currently only one tag may be listed here."
msgstr ""
"定義哪一些標籤是屬於這個組別的。格式為<i>tagname(attribute1, attribute2, ...)</i>與 <i>tagname</i> "
"相符的標籤名稱會在這組別之下顯示。樹狀中相應節點(node)的項目文字將會成為<i>attribute1_value | attribute2_value | "
"...</i>目前來說只有一個標籤會在這裏列出來。"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 162
#: rc.cpp:277
#, no-c-format
msgid "\"No\" na&me:"
msgstr "\"無\"名稱(&M)"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 168
#: rc.cpp:280 rc.cpp:286
#, no-c-format
msgid "The name that appears when no element were found"
msgstr "找不到元素時顯示的名稱"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 171
#: rc.cpp:283 rc.cpp:289
#, no-c-format
msgid ""
"The user visible name of the group. It will be shown in the structure tree as a "
"top node when there are <b>no</b> elements belonging to this group in the "
"document."
msgstr "使用者可見的組別名稱。如果文件中<b>沒有</b>這個組別的元素,結構樹狀的最上層(top node)就會顯示這個名稱。"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 193
#: rc.cpp:292
#, no-c-format
msgid "Elements ideintified by this entry will belong to this group"
msgstr "這個項目辨認到的元素會成為這個組別的一部份"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 221
#: rc.cpp:298
#, no-c-format
msgid "Use elements as tags"
msgstr "把元素當作標籤使用"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 224
#: rc.cpp:301
#, no-c-format
msgid "Treat elements as new tags"
msgstr "把元素當作新標籤"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 227
#: rc.cpp:304
#, no-c-format
msgid ""
"Treat elements as new tags, so they will show up during tag autocompletion."
msgstr "把元素當作新的標籤,這樣它們就會在自動補完中顯示出來了。"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 235
#: rc.cpp:307
#, no-c-format
msgid "&Pseudo DTEP Specific Settings"
msgstr "虛擬 DTE&P 相關設定"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 246
#: rc.cpp:310 rc.cpp:342
#, no-c-format
msgid "Regular expression to find the type of the element"
msgstr "對應元素類型的正規表示式"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 254
#: rc.cpp:313 rc.cpp:345
#, no-c-format
msgid ""
"Regular expression to find the type of the element. The pattern is searched on "
"the result of the <i>DefinitionRx</i> match and the first captured area will "
"hold the element type."
"<br>\n"
"Example (simplified):"
"<br>\n"
"<b>DefinitionRx=\\$+([a-zA-Z]+)=new\\\\s[a-zA-Z]+;"
"<br>\n"
"TypeRx=new\\\\s([a-zA-Z]+);</b>"
"<br>"
"<br>\n"
"This will match strings like <b>$fooObj=new foo;</b>"
". Now this string is searched and it will find <b>new foo;</b>, where <b>foo</b> "
"is the first captured text (the regular expression matching <b>foo</b> "
"is between brackets)."
"<br>\n"
"So the type of <b>$fooObj</b> is <b>foo</b>."
msgstr ""
"對應元素類型的正規表示式。這個樣式會根據<i>定義表示式</i>得出的結果作搜尋。第一次抓到的文字(captured text)會被當作元素的類型。"
"<br>\n"
"舉一個簡單的例子:"
"<br>\n"
"<b>定義表示式=\\$+([a-zA-Z]+)=new\\\\s[a-zA-Z]+;"
"<br>\n"
"元素類型表示式=new\\\\s([a-zA-Z]+);</b>"
"<br>"
"<br>\n"
"這會對應到 <b>$fooObj=new foo;</b> 般的字串。然後類型表示式就會在它之內找到 <b>new foo;</b>,而 <b>foo</b> "
"是第一次抓到的文字。(對應 <b>foo</b> 的表示式正在括號之內)"
"<br>\n"
"所以 <b>$fooObj</b> 的類型為 <b>foo</b>。"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 262
#: rc.cpp:321
#, no-c-format
msgid "&Usage expression:"
msgstr "正規表示式(&U)"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 268
#: rc.cpp:324 rc.cpp:365
#, no-c-format
msgid "Regular expression to find the usage of a group element"
msgstr "對應組別元素用法的正規表示式"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 280
#: rc.cpp:327 rc.cpp:368
#, no-c-format
msgid ""
"Regular expression to find the usage of a group element in the document."
"<br>\n"
"Example 1:"
"<br>\n"
"- classes are defined as <b>class foo {...}</b>"
"<br>\n"
"- classes are used as <b>$objFoo</b>"
"<br>"
"<br>\n"
"Example 2:"
"<br>\n"
"- variables are defined as <b>int i</b>"
"<br>\n"
"- variables are used as <b>@i</b>"
"<br>"
"<br>\n"
"Example 3:"
"<br>\n"
"- variables are defined as <b>$i</b>"
"<br>\n"
"- variables are used as <b>$i</b>. In this case <i>UsageRx </i>"
"is the same as <i>DefinitionRx</i>."
msgstr ""
"對應文件中組別元素的用法的正規表示式。"
"<br>\n"
"何謂用法---例子一:"
"<br>\n"
"- 定義一個類別時使用 <b>class foo {...}</b>"
"<br>\n"
"- 以後使用類別的方法為 <b>$objFoo</b>"
"<br>"
"<br>\n"
"例子二:"
"<br>\n"
"- 定義一個變數時使用 <b>int i</b>"
"<br>\n"
"- 以後使用變數的方法為 <b>@i</b>"
"<br>"
"<br>\n"
"例子三:"
"<br>\n"
"- 定義一個變數時使用 <b>$i</b>"
"<br>\n"
"- 以後使用變數的方法為 <b>$i</b>。在這情況下<i>用法定義式</i>就與<i>元素定義式</i>一樣"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 288
#: rc.cpp:339
#, no-c-format
msgid "Element t&ype expression:"
msgstr "元素類型表示式(&Y):"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 310
#: rc.cpp:353
#, no-c-format
msgid "Definition e&xpression:"
msgstr "定義表示式(&X):"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 316
#: rc.cpp:356 rc.cpp:496
#, no-c-format
msgid "Regular expression to find what belong to this group"
msgstr "對應屬於這組別的文字的正規表示式"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 322
#: rc.cpp:359 rc.cpp:499
#, no-c-format
msgid ""
"Regular expression used to find text areas in the document, which will belong "
"to this group. The first captured area shouldbe the actual name of the group "
"entry."
"<br>\n"
"Example for a <i>class</i> group:"
"<br>\n"
"<b>\\bclass[\\\\s]+([0-9a-zA-Z_\\x7f-\\xff]*)[\\\\s]*</b>"
"<br>\n"
"The first captured area (between \"<b>(</b>\" and \"<b>)</b>"
"\") holds the class name."
msgstr ""
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 350
#: rc.cpp:380
#, no-c-format
msgid "Parent group:"
msgstr "母組別:"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 353
#: rc.cpp:383 rc.cpp:389
#, no-c-format
msgid "The name of the group that may be the parent of this"
msgstr "可以在這項之上的母組別的名稱"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 356
#: rc.cpp:386 rc.cpp:392
#, no-c-format
msgid ""
"The name of the group that may be the parent of this. For example <b>classes</b> "
"might be a parent of <b>functions</b> in case of member functions. This entry "
"indicates this possible relationship and is used to provide functionality like "
"member autocompletion."
msgstr ""
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 375
#: rc.cpp:395
#, no-c-format
msgid "Searched tags:"
msgstr "(已)搜尋的標籤:"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 378
#: rc.cpp:398 rc.cpp:451
#, no-c-format
msgid "Only tags of this type can be part of the group"
msgstr "只有這類型的標籤才可以成為這組別的一部份"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 386
#: rc.cpp:401
#, no-c-format
msgid "Remove when autocompleting:"
msgstr "自動補完時移除:"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 389
#: rc.cpp:404 rc.cpp:424
#, no-c-format
msgid ""
"Regular expression used to remove unwanted strings from the completion text"
msgstr ""
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 397
#: rc.cpp:407
#, no-c-format
msgid "Autocomplete after:"
msgstr ""
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 400
#: rc.cpp:410 rc.cpp:417
#, no-c-format
msgid ""
"Regular expression to tell when to bring up the completion box with the "
"elements of this group"
msgstr ""
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 404
#: rc.cpp:413 rc.cpp:420
#, no-c-format
msgid ""
"Regular expression to tell when to bring up the completion box with the "
"elements of this group."
"<br>\n"
"Example:<b>\\bnew[\\\\s]+$</b> tells that after typing <b>new&nbsp;</b>"
", the completion box with the elements should be shown."
msgstr ""
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 435
#: rc.cpp:430
#, no-c-format
msgid "XmlTag"
msgstr "Xml標籤"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 440
#: rc.cpp:433
#, no-c-format
msgid "XmlTagEnd"
msgstr "Xml結束標籤"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 445
#: rc.cpp:436 rc.cpp:5086 rc.cpp:5142 rc.cpp:5158 rc.cpp:5179
#, no-c-format
msgid "Comment"
msgstr "註解"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 450
#: rc.cpp:439 rc.cpp:4418
#, no-c-format
msgid "CSS"
msgstr "CSS"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 455
#: rc.cpp:442
#, no-c-format
msgid "ScriptTag"
msgstr "指令稿標籤"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 460
#: rc.cpp:445
#, no-c-format
msgid "ScriptStructureBegin"
msgstr "指令稿結構開始"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 465
#: rc.cpp:448
#, no-c-format
msgid "ScriptStructureEnd"
msgstr "指令稿結構結束"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 497
#: rc.cpp:454
#, no-c-format
msgid "Parse file"
msgstr "解析檔案"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 500
#: rc.cpp:457
#, no-c-format
msgid "Check if the filename that is in the elements text should be parsed"
msgstr ""
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 503
#: rc.cpp:460
#, no-c-format
msgid ""
"Check if the filename that is in the elements text should be parsed. This makes "
"sense only if the element may contain a filename and the <i>FileNameRx</i> "
"is specified."
msgstr ""
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 511
#: components/debugger/backtracelistview.cpp:58
#: components/debugger/variableslistview.cpp:57 rc.cpp:463
#, no-c-format
msgid "Type"
msgstr "類型"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 522
#: rc.cpp:466
#, no-c-format
msgid "Simple"
msgstr "簡單"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 525
#: rc.cpp:469
#, no-c-format
msgid "This is a simple group, nothing special"
msgstr "這是一個簡單的組別,沒什麼特別的"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 533
#: rc.cpp:472
#, no-c-format
msgid "Variable group"
msgstr "變數組別"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 536
#: rc.cpp:475
#, no-c-format
msgid "The group's elements are variables"
msgstr "這個組別的元素都是變數"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 544
#: rc.cpp:478
#, no-c-format
msgid "Function group"
msgstr "函式組別"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 547
#: rc.cpp:481
#, no-c-format
msgid "The group's elements are functions"
msgstr "這個組別的元素都是函式"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 555
#: rc.cpp:484
#, no-c-format
msgid "Class group"
msgstr "類別組別"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 558
#: rc.cpp:487
#, no-c-format
msgid "The group's elements are classes"
msgstr "這個組別的元素都是類別"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 566
#: rc.cpp:490
#, no-c-format
msgid "Ob&ject group"
msgstr "物件組別(&J)"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 569
#: rc.cpp:493
#, no-c-format
msgid "The group's elements are objects"
msgstr "這個組別的元素都是物件"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 593
#: rc.cpp:505
#, no-c-format
msgid "Minimal search mode"
msgstr "簡潔搜尋模式"
#. i18n: file ./dialogs/dtepstructureeditdlgs.ui line 596
#: rc.cpp:508
#, no-c-format
msgid ""
"Enable to use the minimal style search for definition instead of the standard "
"(greedy) matching"
msgstr ""
#. i18n: file ./dialogs/specialchardialogs.ui line 16
#: rc.cpp:511 src/quanta_init.cpp:1079
#, no-c-format
msgid "Insert Special Character"
msgstr "插入特殊字元"
#. i18n: file ./dialogs/specialchardialogs.ui line 44
#: rc.cpp:514
#, no-c-format
msgid "&Insert Code"
msgstr "插入代碼(&I)"
#. i18n: file ./dialogs/specialchardialogs.ui line 64
#: rc.cpp:517
#, no-c-format
msgid "Insert C&har"
msgstr "插入字元(&H)"
#. i18n: file ./dialogs/specialchardialogs.ui line 119
#: rc.cpp:523
#, no-c-format
msgid "&Filter:"
msgstr "篩選器(&F):"
#. i18n: file ./dialogs/loadentitydlgs.ui line 27
#: rc.cpp:526
#, no-c-format
msgid "Source DTD:"
msgstr "來源 DTD"
#. i18n: file ./dialogs/loadentitydlgs.ui line 35
#: rc.cpp:529
#, no-c-format
msgid "Target DTEP:"
msgstr "目標 DTEP"
#. i18n: file ./dialogs/loadentitydlgs.ui line 43
#: rc.cpp:532 src/dtds.cpp:904
#, no-c-format
msgid "*.dtd|DTD Definitions"
msgstr "*.dtd|DTD 定義檔案"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 47
#: rc.cpp:535
#, no-c-format
msgid "Attribute quotation:"
msgstr "包圍標籤屬性的括號:"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 53
#: rc.cpp:538
#, no-c-format
msgid "Double Quotes"
msgstr "雙括號"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 58
#: rc.cpp:541
#, no-c-format
msgid "Single Quotes"
msgstr "單括號"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 70
#: rc.cpp:544
#, no-c-format
msgid "Tag case:"
msgstr "標籤大小寫:"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 78
#: rc.cpp:547
#, no-c-format
msgid "Attribute case:"
msgstr "標籤屬性的大小寫:"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 84
#: rc.cpp:550 rc.cpp:562
#, no-c-format
msgid "Default Case"
msgstr "預設大小寫"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 89
#: rc.cpp:553 rc.cpp:565
#, no-c-format
msgid "Lower Case"
msgstr "小寫"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 94
#: rc.cpp:556 rc.cpp:568
#, no-c-format
msgid "Upper Case"
msgstr "大寫"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 106
#: rc.cpp:559
#, no-c-format
msgid "Auto-close o&ptional tags"
msgstr "自動關閉可選標籤(&P)"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 134
#: rc.cpp:571
#, no-c-format
msgid "Auto-close &non single and non optional tags"
msgstr "自動關閉非單個標籤及非可選標籤(&N)"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 159
#: rc.cpp:574
#, no-c-format
msgid "&Update opening/closing tag automatically"
msgstr "自動更新開始/結束標籤(&U)"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 175
#: rc.cpp:577
#, no-c-format
msgid "Use &auto-completion"
msgstr "使用自動補完(&A)"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 183
#: rc.cpp:580
#, no-c-format
msgid "Automatic &replacement of the accented characters"
msgstr "自動取代重音字母如áéíóú(&R)"
#. i18n: file ./dialogs/settings/styleoptionss.ui line 187
#: rc.cpp:583
#, no-c-format
msgid ""
"If this option is turned on the accented characters, like <b>&#225;</b>"
", will be automatically replaced by their unicode style notation, for the "
"above case with <b>&#038;#225;</b>."
"<br>\n"
"We suggest to leave this option off and use an unicode or locale encoding for "
"your documents."
msgstr ""
"此選項啟用後,所有重音字母如 <b>&#225;</b>, 會被自動取代成對應的 Unicode 風格標記。例如這個字母就會變成<b>"
"&#038;#225;</b>。"
"<br>\n"
"我們建議不要使用這選項,而使用 Unicode 或本地編碼作為文件的編碼類型。"
#. i18n: file ./dialogs/settings/abbreviations.ui line 25
#: rc.cpp:587 src/quanta.cpp:1253
#, no-c-format
msgid "Abbreviations"
msgstr "縮寫"
#. i18n: file ./dialogs/settings/abbreviations.ui line 36
#: rc.cpp:590 rc.cpp:2563 rc.cpp:2575
#, no-c-format
msgid "Add..."
msgstr "加入..."
#. i18n: file ./dialogs/settings/abbreviations.ui line 52
#: rc.cpp:596
#, no-c-format
msgid "&New..."
msgstr "新增(&N)..."
#. i18n: file ./dialogs/settings/abbreviations.ui line 68
#: rc.cpp:599
#, no-c-format
msgid "&Group:"
msgstr "組別(&G)"
#. i18n: file ./dialogs/settings/abbreviations.ui line 87
#: rc.cpp:602
#, no-c-format
msgid "&Valid for:"
msgstr "對於這些 DTEP 是有效的(&V)"
#. i18n: file ./dialogs/settings/abbreviations.ui line 117
#: rc.cpp:605
#, no-c-format
msgid "Template"
msgstr "範本"
#. i18n: file ./dialogs/settings/abbreviations.ui line 128
#: rc.cpp:608 treeviews/projecttreeview.cpp:109
#, no-c-format
msgid "Description"
msgstr "描述"
#. i18n: file ./dialogs/settings/abbreviations.ui line 193
#: rc.cpp:617 rc.cpp:1505 rc.cpp:2781
#, no-c-format
msgid "&Edit..."
msgstr "編輯(&E)..."
#. i18n: file ./dialogs/settings/abbreviations.ui line 207
#: rc.cpp:620
#, no-c-format
msgid "Expands to:"
msgstr "展開成:"
#. i18n: file ./dialogs/settings/abbreviations.ui line 226
#: rc.cpp:623
#, no-c-format
msgid "&Templates:"
msgstr "範本(&T)"
#. i18n: file ./dialogs/settings/filemaskss.ui line 52
#: rc.cpp:626 rc.cpp:3021
#, no-c-format
msgid ""
"New files will have the extension and highlighting according to this setting"
msgstr "新的檔案會使用這個設定指明的副檔名及語法加亮"
#. i18n: file ./dialogs/settings/filemaskss.ui line 66
#: rc.cpp:629
#, no-c-format
msgid "Mimetypes"
msgstr "Mime 類型"
#. i18n: file ./dialogs/settings/filemaskss.ui line 93
#: rc.cpp:632
#, no-c-format
msgid "&Reset to Default"
msgstr "重設(&R)"
#. i18n: file ./dialogs/settings/filemaskss.ui line 101
#: rc.cpp:635
#, no-c-format
msgid "Te&xts:"
msgstr "文字(&X)"
#. i18n: file ./dialogs/settings/filemaskss.ui line 112
#: rc.cpp:638
#, no-c-format
msgid "&Markups:"
msgstr "標記語言(Markups)(&M)"
#. i18n: file ./dialogs/settings/filemaskss.ui line 123
#: rc.cpp:641
#, no-c-format
msgid "&Images:"
msgstr "影像(&I)"
#. i18n: file ./dialogs/settings/filemaskss.ui line 156
#: rc.cpp:644
#, no-c-format
msgid "&Scripts:"
msgstr "指令稿(&S)"
#. i18n: file ./dialogs/settings/filemaskss.ui line 197
#: rc.cpp:647
#, no-c-format
msgid "Default character &encoding:"
msgstr "預設字元編碼(&E)"
#. i18n: file ./dialogs/settings/filemaskss.ui line 211
#: rc.cpp:650 rc.cpp:3012
#, no-c-format
msgid "Default &DTD:"
msgstr "預設 &DTD"
#. i18n: file ./dialogs/settings/filemaskss.ui line 239
#: rc.cpp:653
#, no-c-format
msgid "Startup Options"
msgstr "啟動選項"
#. i18n: file ./dialogs/settings/filemaskss.ui line 250
#: rc.cpp:656
#, no-c-format
msgid "L&oad last-opened files"
msgstr "載入上次已開啟的檔案(&O)"
#. i18n: file ./dialogs/settings/filemaskss.ui line 258
#: rc.cpp:659
#, no-c-format
msgid "S&how splashscreen"
msgstr "顯示啟動畫面(&H)"
#. i18n: file ./dialogs/settings/filemaskss.ui line 266
#: rc.cpp:662
#, no-c-format
msgid "&Load last-opened project"
msgstr "載入上次已開啟的專案(&L)"
#. i18n: file ./dialogs/settings/filemaskss.ui line 284
#: rc.cpp:665
#, no-c-format
msgid "Create backups every"
msgstr "每次備份相隔時間"
#. i18n: file ./dialogs/settings/filemaskss.ui line 306
#: rc.cpp:668
#, no-c-format
msgid "minutes"
msgstr "分鐘"
#. i18n: file ./dialogs/settings/filemaskss.ui line 316
#: rc.cpp:671
#, no-c-format
msgid "Show the DTD selection dialog when loading files with &unknown DTD"
msgstr "載入檔案時若它使用了未知的 DTD就顯示 DTD 選擇對話盒(&U)"
#. i18n: file ./dialogs/settings/codetemplatedlgs.ui line 31
#: dialogs/settings/abbreviation.cpp:167 rc.cpp:674
#, no-c-format
msgid "Add Code Template"
msgstr "加入代碼範本"
#. i18n: file ./dialogs/settings/codetemplatedlgs.ui line 42
#: rc.cpp:677
#, no-c-format
msgid "&Template:"
msgstr "範本(&T)"
#. i18n: file ./dialogs/settings/codetemplatedlgs.ui line 53
#: rc.cpp:680
#, no-c-format
msgid "&Description:"
msgstr "描述(&D)"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 39
#: rc.cpp:683
#, no-c-format
msgid "Reset window layout to the default on the next startup"
msgstr "下一次啟動時重設視窗布局"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 47
#: rc.cpp:686
#, no-c-format
msgid "Show hidden files in files tree"
msgstr "在檔案樹中顯示隱藏的檔案"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 55
#: rc.cpp:689
#, no-c-format
msgid "Save tree status for local trees"
msgstr "為本地樹狀儲存狀態"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 63
#: rc.cpp:692
#, no-c-format
msgid "Close Buttons on Tabs"
msgstr "分頁上的關閉按鈕"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 74
#: rc.cpp:695
#, no-c-format
msgid "&Always show"
msgstr "永遠顯示(&A)"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 85
#: rc.cpp:698
#, no-c-format
msgid "&Do not show"
msgstr "不顯示(&D)"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 93
#: rc.cpp:701
#, no-c-format
msgid "Show dela&yed"
msgstr "游標在分頁圖示上才顯示(&Y)"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 103
#: rc.cpp:704 rc.cpp:4916 src/quanta.cpp:5297 src/quanta_init.cpp:184
#: src/viewmanager.cpp:564
#, no-c-format
msgid "Documentation"
msgstr "文件"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 114
#: rc.cpp:707
#, no-c-format
msgid "New tab"
msgstr "新的分頁"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 125
#: rc.cpp:710 rc.cpp:728
#, no-c-format
msgid "Separate toolview"
msgstr "獨立的工具檢視"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 135
#: rc.cpp:713
#, no-c-format
msgid "Toolview Tabs"
msgstr "工具檢視的分頁"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 146
#: rc.cpp:716
#, no-c-format
msgid "Icon and text"
msgstr "圖示 + 文字"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 165
#: rc.cpp:722 rc.cpp:5171
#, no-c-format
msgid "Icon"
msgstr "圖示"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 175
#: rc.cpp:725 src/quanta.cpp:5283
#, no-c-format
msgid "Preview"
msgstr "預覽"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 200
#: rc.cpp:731
#, no-c-format
msgid "Editor area"
msgstr "編輯器區域"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 230
#: rc.cpp:734
#, no-c-format
msgid "&Warning Messages"
msgstr "警告訊息(&W)"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 241
#: rc.cpp:737
#, no-c-format
msgid "Warn about opening binar&y/unknown files"
msgstr "開啟二進制檔/未知檔案時警告(&Y)"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 249
#: rc.cpp:740
#, no-c-format
msgid "Warn when executing &actions associated with events"
msgstr "執行與事件有關聯的動作時警告(&A)"
#. i18n: file ./dialogs/settings/previewoptionss.ui line 257
#: rc.cpp:743
#, no-c-format
msgid "Show all warning messages"
msgstr "顯示所有訊息"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 47
#: rc.cpp:746
#, no-c-format
msgid "Structure Tree Look && Feel"
msgstr "結構樹狀的觀感"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 64
#: rc.cpp:749
#, no-c-format
msgid "Use 0 to disable the automatic refresh of structure tree"
msgstr "使用 0 禁止結構樹狀的自動更新"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 89
#: rc.cpp:752
#, no-c-format
msgid "Instant update"
msgstr "即時更新"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 92
#: rc.cpp:755 rc.cpp:776
#, no-c-format
msgid "Update the structure tree after every keystroke"
msgstr "每鍵入一字元就立刻更新結構樹狀"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 117
#: rc.cpp:758
#, no-c-format
msgid "Show closing tags"
msgstr "顯示結束標籤"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 125
#: rc.cpp:761
#, no-c-format
msgid "Show empt&y nodes and groups"
msgstr "顯示空白的結(nodes)及組別(&Y)"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 136
#: rc.cpp:764
#, no-c-format
msgid "Set to 0 in order to expand the whole tree"
msgstr "設為 0 可展開整個樹"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 144
#: rc.cpp:767
#, no-c-format
msgid "Refresh frequency (in seconds):"
msgstr "重新整理頻率(秒)"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 152
#: rc.cpp:770
#, no-c-format
msgid "Expand tree when reparse to level:"
msgstr "重新解析時展開樹狀的層次深度:"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 162
#: rc.cpp:773
#, no-c-format
msgid "Clicks on Structure Tree Items"
msgstr "在結構樹狀的項目上按滑鼠時"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 174
#: dialogs/settings/parseroptions.cpp:37 dialogs/settings/parseroptions.cpp:55
#: dialogs/settings/parseroptions.cpp:58 rc.cpp:779 rc.cpp:815
#: treeviews/structtreeview.cpp:111 treeviews/structtreeview.cpp:486
#: treeviews/structtreeview.cpp:488 treeviews/structtreeview.cpp:531
#, no-c-format
msgid "Select Tag Area"
msgstr "選擇標籤區域"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 179
#: dialogs/settings/parseroptions.cpp:35 dialogs/settings/parseroptions.cpp:56
#: rc.cpp:782 rc.cpp:818
#, no-c-format
msgid "Nothing"
msgstr "無"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 189
#: dialogs/settings/parseroptions.cpp:53 rc.cpp:785 rc.cpp:809
#, no-c-format
msgid "Find Tag"
msgstr "尋找標籤"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 194
#: dialogs/settings/parseroptions.cpp:34 dialogs/settings/parseroptions.cpp:43
#: dialogs/settings/parseroptions.cpp:52 rc.cpp:788 rc.cpp:806
#, no-c-format
msgid "Find Tag & Open Tree"
msgstr "尋找標籤 & 展開樹狀目錄"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 206
#: rc.cpp:791
#, no-c-format
msgid "Left button:"
msgstr "左鍵:"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 212
#: dialogs/settings/parseroptions.cpp:36 rc.cpp:794
#, no-c-format
msgid "Popup Menu"
msgstr "彈出選單"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 224
#: rc.cpp:797
#, no-c-format
msgid "Double click:"
msgstr "雙擊:"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 232
#: rc.cpp:800
#, no-c-format
msgid "Middle button:"
msgstr "中鍵:"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 240
#: rc.cpp:803
#, no-c-format
msgid "Right button:"
msgstr "右鍵:"
#. i18n: file ./dialogs/settings/parseroptionsui.ui line 256
#: dialogs/settings/parseroptions.cpp:54 rc.cpp:812
#: treeviews/structtreeview.cpp:112 treeviews/structtreeview.cpp:534
#, no-c-format
msgid "Go to End of Tag"
msgstr "前往標籤結尾"
#. i18n: file ./dialogs/casewidget.ui line 30
#: rc.cpp:821
#, no-c-format
msgid "Tag Case"
msgstr "標籤的大小寫"
#. i18n: file ./dialogs/casewidget.ui line 41
#: rc.cpp:824 rc.cpp:836
#, no-c-format
msgid "Upper case"
msgstr "大寫"
#. i18n: file ./dialogs/casewidget.ui line 49
#: rc.cpp:827 rc.cpp:839
#, no-c-format
msgid "Lower case"
msgstr "小寫"
#. i18n: file ./dialogs/casewidget.ui line 57
#: rc.cpp:830 rc.cpp:842
#, no-c-format
msgid "Unchanged"
msgstr "沒有改變"
#. i18n: file ./dialogs/casewidget.ui line 70
#: rc.cpp:833
#, no-c-format
msgid "Attribute Case"
msgstr "標籤屬性的大小寫"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 25
#: parsers/dtd/dtdparser.cpp:179 rc.cpp:845 src/quanta.cpp:3108
#, no-c-format
msgid "Configure DTEP"
msgstr "設定 DTEP"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 40
#: rc.cpp:848 rc.cpp:1968 rc.cpp:2141
#, no-c-format
msgid "&General"
msgstr "一般(&G)"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 59
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:57 rc.cpp:851 rc.cpp:2449
#: rc.cpp:2497 rc.cpp:2928
#, no-c-format
msgid "Name:"
msgstr "名稱:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 65
#: rc.cpp:854 rc.cpp:869
#, no-c-format
msgid "DTD definition string"
msgstr "DTD 定義字串"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 68
#: rc.cpp:857 rc.cpp:872
#, no-c-format
msgid ""
"The real name of the DTEP. In case of XML DTEPs this should be the DTD "
"definition string, like "
"-<i>//W3C//DTD&nbsp;HTML&nbsp;4.01&nbsp;Transitional//EN</i>."
msgstr ""
"DTEP 的真正名稱。對於 XML DTEP 來說,它就是 DTD "
"定義字串,例如-<i>//W3C//DTD&nbsp;HTML&nbsp;4.01&nbsp;Transitional//EN</i>."
#. i18n: file ./dialogs/dtepeditdlgs.ui line 84
#: rc.cpp:860
#, no-c-format
msgid "Short name:"
msgstr "短名:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 90
#: rc.cpp:863 rc.cpp:875
#, no-c-format
msgid "Beautified, user visible name"
msgstr "精簡而可見的名稱"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 93
#: rc.cpp:866 rc.cpp:878
#, no-c-format
msgid ""
"The user visible, beautified name. If not defined, the real name is used."
msgstr "使用者可見而又精簡的名稱。不定義的話會使用真實名稱。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 173
#: rc.cpp:881
#, no-c-format
msgid "Type Specific Settings"
msgstr "類型相關的設定"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 199
#: rc.cpp:884
#, no-c-format
msgid "URL:"
msgstr "URL"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 205
#: rc.cpp:887 rc.cpp:903
#, no-c-format
msgid "URL pointing to the DTD definiton file"
msgstr "DTD 定義檔案的 URL 位置"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 208
#: rc.cpp:890 rc.cpp:906
#, no-c-format
msgid ""
"URL pointing to the DTD definiton file, like "
"<i>http://www.w3.org/TR/html4/loose.dtd</i>."
msgstr "DTD 定義檔案的 URL 位置,如<i>http://www.w3.org/TR/html4/loose.dtd</i>."
#. i18n: file ./dialogs/dtepeditdlgs.ui line 216
#: rc.cpp:893
#, no-c-format
msgid "DOCT&YPE string:"
msgstr "DOCT&YPE 字串:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 222
#: rc.cpp:896 rc.cpp:909
#, no-c-format
msgid "The string that should appear in the !DOCTYPE tag"
msgstr "在 !DOCTYPE 標籤內出現的字串"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 226
#: rc.cpp:899 rc.cpp:912
#, no-c-format
msgid ""
"The string that should appear in the !DOCTYPE tag, like"
"<br>\n"
"<i>HTML&nbsp;PUBLIC&nbsp;\"-//W3C//DTD&nbsp;HTML&nbsp;4.01&nbsp;Transitional//EN"
"\"&nbsp;&nbsp;&nbsp;"
"<br>\"http://www.w3.org/TR/html4/loose.dtd\"</i>"
msgstr ""
"在 !DOCTYPE 標籤內出現的字串,如"
"<br>\n"
"<i>HTML&nbsp;PUBLIC&nbsp;\"-//W3C//DTD&nbsp;HTML&nbsp;4.01&nbsp;Transitional//EN"
"\"&nbsp;&nbsp;&nbsp;"
"<br>\"http://www.w3.org/TR/html4/loose.dtd\"</i>"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 274
#: rc.cpp:916
#, no-c-format
msgid "Top level"
msgstr "最上層"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 277
#: rc.cpp:919
#, no-c-format
msgid "Check if the DTEP can act as a top level DTEP."
msgstr "檢查 DTEP 是否可以作為最上層的 DTEP。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 280
#: rc.cpp:922
#, no-c-format
msgid ""
"Check if the DTEP can act as a top level DTEP. This means that the document can "
"be of this type. Some pseudo DTEPs cannot act as a top level DTEP, like <i>"
"PHP</i> as they are always included as part of another DTEP, while some others "
"can be included and act as standalone as well, like the case of <i>CSS</i>."
msgstr ""
"檢查 DTEP 是否可以作為最上層的 DTEP即是這類型是否可以獨立成為一個文件。某些虛擬 DTEP 不可以作為最上層,因為它們不能獨立存在,需要其他 "
"DTEP 把它們包含在內,如<i>PHP</i>。而有些可作最上層,如<i>CSS</i>。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 292
#: rc.cpp:925
#, no-c-format
msgid "Toolbar folder:"
msgstr "工具列目錄:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 298
#: rc.cpp:928 rc.cpp:934
#, no-c-format
msgid "The name of the folder where the toolbars are stored"
msgstr "工具列存放目錄的名稱"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 301
#: rc.cpp:931 rc.cpp:937
#, no-c-format
msgid ""
"The name of the folder where the toolbars are stored. This is a relative name "
"to "
"<br><i>$TDEDIR(&nbsp;or&nbsp;$TDEHOME)/share/apps/quanta/toolbars</i> ."
msgstr ""
"工具列存放目錄的名稱。它是相對於"
"<br><i>$TDEDIR(&nbsp;or&nbsp;$TDEHOME)/share/apps/quanta/toolbars</i>的路徑。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 320
#: rc.cpp:940
#, no-c-format
msgid "&Autoloaded toolbars:"
msgstr "自動載入的工具列(&A)"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 326
#: rc.cpp:943 rc.cpp:949
#, no-c-format
msgid "Comma separated list of toolbars"
msgstr "以逗號分隔的工具列清單"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 329
#: rc.cpp:946 rc.cpp:952
#, no-c-format
msgid ""
"Comma separated list of toolbars from the toolbar folder that will be loaded "
"when a document with this DTEP is loaded."
msgstr "這個 DTEP 載入時,從工具列目錄載入的工具列清單。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 356
#: rc.cpp:955
#, no-c-format
msgid "Case sensitive"
msgstr "區分大小寫"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 362
#: rc.cpp:958
#, no-c-format
msgid "Check if the DTEP has case sensitive tags"
msgstr "DTEP 的標籤是否區分大小寫"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 365
#: rc.cpp:961
#, no-c-format
msgid ""
"Indicates whether the DTEP has case sensitive tags. In case of XML this should "
"be checked, but for example HTML variants are not case sensitive."
msgstr "指出 DTEP 標籤是否區分大小寫。對於 XML 這項需要選上,但 HTML 之類的並不區分。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 381
#: rc.cpp:964 rc.cpp:2446
#, no-c-format
msgid "Type:"
msgstr "類型:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 384
#: rc.cpp:967 rc.cpp:989
#, no-c-format
msgid "The family to where this DTEP belongs."
msgstr "這個 DTEP 隸屬的家族。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 388
#: rc.cpp:970 rc.cpp:992
#, no-c-format
msgid ""
"The family to where this DTEP belong. There are two families:"
"<br>"
"<p><b>XML style</b>:DTEP describing an XML like language</p>\n"
"<p><b>Pseudo type</b>:DTEP describing some other language, where the notion of "
"a tag is not the same as in XML. Examples are <i>PHP, JavaScript, CSS</i>.</p>"
msgstr ""
"這個 DTEP 隸屬的家族。家族有兩個:"
"<br>"
"<p><b>XML 風格</b>DTEP 是用來描述類似 XML 語言的。</p>\n"
"<p><b>虛擬類型</b>DTEP 是用來描述其他與 XML 格式不相似的語言的,如<i>PHP, JavaScript, CSS</i>。</p>"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 396
#: rc.cpp:974
#, no-c-format
msgid "Inherits:"
msgstr "繼承:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 399
#: rc.cpp:977 rc.cpp:999
#, no-c-format
msgid "The DTEP name from where this DTEP inherits the tags."
msgstr "若這個 DTEP 繼承另一個 DTEP 的標籤,則輸入該來源 DTEP 名稱。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 402
#: rc.cpp:980 rc.cpp:1002
#, no-c-format
msgid ""
"The real name of the DTEP (like "
"-<i>//W3C//DTD&nbsp;HTML&nbsp;4.01&nbsp;Transitional//EN</i>"
") from where the current DTEP inherits the tags."
msgstr ""
"目前的 DTEP 繼承的另一個 DTEP 的真實名稱(如 "
"-<i>//W3C//DTD&nbsp;HTML&nbsp;4.01&nbsp;Transitional//EN</i>)。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 408
#: rc.cpp:983
#, no-c-format
msgid "XML Style"
msgstr "XML 風格"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 413
#: rc.cpp:986
#, no-c-format
msgid "Pseudo Type"
msgstr "虛擬類型"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 440
#: rc.cpp:996
#, no-c-format
msgid "Mimet&ypes:"
msgstr "Mime 類型(&T):"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 473
#: rc.cpp:1005
#, no-c-format
msgid "Comma separated list of mimetypes"
msgstr "以逗號分隔的 Mime 類型清單"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 476
#: rc.cpp:1008
#, no-c-format
msgid ""
"Comma separated list of mimetypes. Files of these types are treated as "
"belonging to this DTEP, unless the !DOCTYPE entry says something else."
msgstr "以逗號分隔的 Mime 類型清單。除非 !DOCTYPE 項目有其他的表示,否則這些類型的檔案會被當作是屬於這個 DTEP 的。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 484
#: rc.cpp:1011
#, no-c-format
msgid "The default extension of files belonging to this DTEP"
msgstr "屬於這個 DTEP 的檔案的預設副檔名"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 492
#: rc.cpp:1014
#, no-c-format
msgid "E&xtension:"
msgstr "副檔名(&X):"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 522
#: rc.cpp:1017
#, no-c-format
msgid "P&ages"
msgstr "頁面(&A)"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 550
#: rc.cpp:1020
#, no-c-format
msgid "Enable the first extra page"
msgstr "啟用第一張額外頁面"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 553
#: rc.cpp:1023
#, no-c-format
msgid ""
"Every tab edit dialog will have one more extra page aside of the main page"
msgstr "每個分頁編緝對話盒除了主頁之外還會多開一頁"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 556
#: rc.cpp:1026
#, no-c-format
msgid ""
"Every tab edit dialog will have one more extra page aside of the main page. You "
"can configure what will be on this page in the below fields."
msgstr "每個分頁編緝對話盒除了主頁之外還會多開一頁。您可以在下面設定頁面的內容。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 570
#: rc.cpp:1032 rc.cpp:1076
#, no-c-format
msgid "The title of the page"
msgstr "頁面的標題"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 573
#: rc.cpp:1035 rc.cpp:1079
#, no-c-format
msgid ""
"The title of the page, like <b>Core && i18n</b>. As you see, the ampersand must "
"be doubled."
msgstr "頁面的標題,如 <b>Core && i18n</b>。請注意:如您所見,''and''號需要鍵入兩次。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 584
#: rc.cpp:1038 rc.cpp:1096 rc.cpp:1117 rc.cpp:1129 rc.cpp:1147
#, no-c-format
msgid "Groups:"
msgstr "組別:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 587
#: rc.cpp:1041 rc.cpp:1082
#, no-c-format
msgid "Comma separated list of the common attribute groups"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 595
#: rc.cpp:1044 rc.cpp:1085
#, no-c-format
msgid ""
"Comma separated list of the common attribute groups. The attributes from the "
"listed groups will appear on this page."
"<br>The common attributes are specified in each DTEP's <i>common.tag</i> "
"file, where the <i>common=\"yes\"</i> attribute must be set."
"<br>The following example defined the common I18n attribute group:"
"<br>"
"<p><b>\n"
"&lt;tag name=\"I18n\" common=\"yes\">"
"<br>\n"
"&nbsp;&nbsp;&lt;attr name=\"lang\" type=\"input\" />"
"<br>\n"
"&nbsp;&nbsp;&lt;attr name=\"dir\" type=\"input\" />"
"<br>\n"
"&lt;/tag>\n"
"</b></p>"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 606
#: rc.cpp:1052
#, no-c-format
msgid "Enable the second extra page"
msgstr "啟用第二張額外頁面"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 609
#: rc.cpp:1055 rc.cpp:1061 rc.cpp:1067 rc.cpp:1073
#, no-c-format
msgid "See the tooltip and \"What's This?\" information for the first checkbox"
msgstr "請參看工具提示及「這是什麼」取得第一個剔選方塊的資訊"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 620
#: rc.cpp:1058
#, no-c-format
msgid "Enable the third extra page"
msgstr "啟用第三張額外頁面"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 634
#: rc.cpp:1064
#, no-c-format
msgid "Enable the fourth extra page"
msgstr "啟用第四張額外頁面"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 648
#: rc.cpp:1070
#, no-c-format
msgid "Enable the fifth extra page"
msgstr "啟用第五張額外頁面"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 695
#: rc.cpp:1093 rc.cpp:1099 rc.cpp:1102 rc.cpp:1108 rc.cpp:1114 rc.cpp:1120
#: rc.cpp:1126 rc.cpp:1132 rc.cpp:1135 rc.cpp:1141 rc.cpp:1144 rc.cpp:1150
#: rc.cpp:1153 rc.cpp:1156 rc.cpp:1159 rc.cpp:1162
#, no-c-format
msgid ""
"See the tooltip and \"What's This?\" information for the first page fields"
msgstr "請參看工具提示及「這是什麼」取得第一頁面的欄位資訊"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 894
#: rc.cpp:1165
#, no-c-format
msgid "Parsing &Rules"
msgstr "解析規則(&R)"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 905
#: rc.cpp:1168
#, no-c-format
msgid "Enable minus in words"
msgstr "允許字詞中包含減號"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 908
#: rc.cpp:1171
#, no-c-format
msgid "Treat the minus sign as part of a word"
msgstr "把字詞中的減號當作詞語的一部份"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 911
#: rc.cpp:1174
#, no-c-format
msgid ""
"If enabled <b>this-is-a-word</b> is treated like a word. Otherwise it is "
"treated like 4 words."
msgstr "啟用後,<b>this-is-a-word</b> 會被當作一個字詞,否則會被當成 4 個詞語。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 919
#: rc.cpp:1177
#, no-c-format
msgid "Comments:"
msgstr "註解:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 925
#: rc.cpp:1180 rc.cpp:1444
#, no-c-format
msgid "Comma separated list of area borders for comments"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 929
#: rc.cpp:1183 rc.cpp:1447
#, no-c-format
msgid ""
"Comma separated list of area borders for comments. <i>EOL</i> "
"means end of line, used for single line comments."
"<br>\n"
"Example: <b>//&nbsp;EOL,&nbsp;/*&nbsp;*/</b>"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 945
#: rc.cpp:1187
#, no-c-format
msgid "Type Specific Rules"
msgstr "類型相關的規則"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 971
#: rc.cpp:1190
#, no-c-format
msgid "XML style single tags"
msgstr "XML 風格單一標籤"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 977
#: rc.cpp:1193
#, no-c-format
msgid "Check to use XML style single tags"
msgstr "選取後使用 XML 風格的單一標籤"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 980
#: rc.cpp:1196
#, no-c-format
msgid ""
"Check to use XML style single tags (<b>&lt;single_tag /&gt;</b>"
"), otherwise HTML style single tags (<b>&lt;single_tag&gt;</b>) are used."
msgstr ""
"選取後使用 XML 風格的單一標籤(<b>&lt;single_tag /&gt;</b>),否則會使用 HTML 風格的單一標籤(<b>"
"&lt;single_tag&gt;</b>)。"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 988
#: rc.cpp:1199
#, no-c-format
msgid "Use common rules"
msgstr "使用一般的規則"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 994
#: rc.cpp:1202
#, no-c-format
msgid "Append common parsing rules"
msgstr "附加一般的解析規則"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1002
#: rc.cpp:1205
#, no-c-format
msgid ""
"Check it to append common parsing rules. These are:\n"
"<p><b>\n"
"&nbsp;&nbsp;SpecialAreas=&lt;?xml ?&gt;, &lt;!-- --&gt;, &lt;! &gt;\n"
"&nbsp;&nbsp;SpecialAreaNames = XML PI, comment, DTD\n"
"&nbsp;&nbsp;Comments = &lt;!-- --&gt;\n"
"</b></p>"
msgstr ""
"選取後會附加一般的解析規則。這些規則是:\n"
"<p><b>\n"
"&nbsp;&nbsp;SpecialAreas=&lt;?xml ?&gt;, &lt;!-- --&gt;, &lt;! &gt;\n"
"&nbsp;&nbsp;SpecialAreaNames = XML PI, comment, DTD\n"
"&nbsp;&nbsp;Comments = &lt;!-- --&gt;\n"
"</b></p>"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1010
#: rc.cpp:1213
#, no-c-format
msgid "Extended booleans"
msgstr "延伸型 Boolean"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1013
#: rc.cpp:1216
#, no-c-format
msgid "Check if the booleans are stored in extended form"
msgstr "把 Boolean 以延伸型式儲存"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1021
#: rc.cpp:1219
#, no-c-format
msgid ""
"Check if you want extended booleans in the language."
"<br>\n"
"Examples:"
"<br>\n"
"<i>Simple boolean</i>: <b>&lt;tag&nbsp;booleanAttr&gt;</b>"
"<br>\n"
"<i>Extended boolean</i>: <b>&lt;tag&nbsp;booleanAttr=\"1\"&gt;</b> or <b>"
"&lt;tag&nbsp;booleanAttr=\"true\"&gt;</b>.\n"
"<br>\n"
"See the <b>True</b> and <b>False</b> boxes to define the values for true and "
"false."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1040
#: rc.cpp:1227 rc.cpp:1230
#, no-c-format
msgid "The value of \"true\" in case of extended booleans"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1070
#: rc.cpp:1233
#, no-c-format
msgid "False:"
msgstr "假:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1084
#: rc.cpp:1236
#, no-c-format
msgid "True:"
msgstr "真:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1112
#: rc.cpp:1239 rc.cpp:1250
#, no-c-format
msgid ""
"Comma separated list of the beginning and closing string for special areas"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1117
#: rc.cpp:1242 rc.cpp:1253
#, no-c-format
msgid ""
"The beginning and closing string of special areas, separated by a comma."
"<br>\n"
" Special areas are not parsed according to this DTD's rules, but according to "
"their own rules."
"<br>\n"
" A special area can be a pseudo DTD, a comment or something like that, for "
"example <i>&lt;!--&nbsp;--&gt;</i>."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1125
#: rc.cpp:1247
#, no-c-format
msgid "Special areas:"
msgstr "特殊區域:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1144
#: rc.cpp:1258 rc.cpp:1264
#, no-c-format
msgid "Comma-separated list of the names for the above-defined special areas"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1152
#: rc.cpp:1261
#, no-c-format
msgid "Special area names:"
msgstr "特殊區域名稱:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1166
#: rc.cpp:1267
#, no-c-format
msgid "Special tags:"
msgstr "特殊標籤:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1169
#: rc.cpp:1270 rc.cpp:1277
#, no-c-format
msgid "Specifies a tag that defines the start of a special area"
msgstr "指定特殊區域的開始標籤"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1173
#: rc.cpp:1273 rc.cpp:1280
#, no-c-format
msgid ""
"Specifies a tag which defines the start of a special area in the form of <i>"
"tagname(attributename)</i>."
"<br>\n"
"Example:<b>script(language)</b> means that any <b>&lt;script&gt;</b> "
"tag having a <b>language</b> attribute indicates a special area."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1206
#: rc.cpp:1284
#, no-c-format
msgid "Definition tags:"
msgstr "定義標籤:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1212
#: rc.cpp:1287 rc.cpp:1355
#, no-c-format
msgid "Tags and attributes defining this DTEP"
msgstr "定義這 DTEP 的標籤及標籤屬性"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1219
#: rc.cpp:1290 rc.cpp:1358
#, no-c-format
msgid ""
"Comma separated list of tags that define this DTEP. The format used is <i>"
"tagname(attribute[defaultvalue])</i>. If the parent (a real) DTEP has a tag "
"with <i>tagname</i> and\n"
"the <i>attribute value</i> of this tag is equal with the name of this DTEP, the "
"tag area\n"
"is parsed according to the rules of this DTEP."
"<br>\n"
"If <i>[defaultvalue]</i> is present, it means that if the attribute is not "
"present in the tag it is taken as present with <i>value = defaultvalue</i>."
"<br>\n"
"Example: <b>Tags=style(type[text/css])</b> means that both <b>&lt;style&gt;</b> "
"and <b>&lt;style&nbsp;type=\"text/css\"&gt;</b> are treated the same way and "
"the DTEP defined by this tag is named <b>text/css</b>."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1227
#: rc.cpp:1297
#, fuzzy, no-c-format
msgid "Area borders:"
msgstr "無排序"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1233
#: rc.cpp:1300 rc.cpp:1365
#, no-c-format
msgid "Comma separated list of the area borders"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1237
#: rc.cpp:1303 rc.cpp:1368
#, no-c-format
msgid ""
"Comma separated list of the area borders encapsulating this pseudo DTEP. In the "
"case of PHP it is:"
"<br>\n"
"<b>&lt;?&nbsp;?&gt;,&nbsp;&lt;*&nbsp;*&gt;,&nbsp;&lt;%&nbsp;%&gt;</b>"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1245
#: rc.cpp:1307
#, no-c-format
msgid "Structure keywords:"
msgstr "結構關鍵字:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1251
#: rc.cpp:1310 rc.cpp:1349
#, no-c-format
msgid "Comma separated list of structure keywords"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1254
#: rc.cpp:1313 rc.cpp:1352
#, no-c-format
msgid ""
"Comma separated list of structure keywords. The keywords used here are used to "
"create new node (nodes for structures) in the structure tree, like for a "
"function, class or if block."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1262
#: rc.cpp:1316
#, no-c-format
msgid "Structure delimiting:"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1268
#: rc.cpp:1319 rc.cpp:1429
#, no-c-format
msgid "Regular expression that finds the beginning or end of a structure"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1271
#: rc.cpp:1322 rc.cpp:1432
#, no-c-format
msgid ""
"Regular expression that finds the beginning or end of a structure. This is "
"usually the combination of <b>Structure beginning</b> and <b>Structure end</b>"
", like <b>\\{&nbsp;|&nbsp;\\}</b>"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1279
#: rc.cpp:1325
#, no-c-format
msgid "Structure beginning:"
msgstr "結構開始:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1285
#: rc.cpp:1328 rc.cpp:1387
#, no-c-format
msgid "A string specifying the beginning of a structure"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1288
#: rc.cpp:1331 rc.cpp:1390
#, no-c-format
msgid ""
"A string specifying the beginning of a structure, like <b>{</b> in many cases."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1296
#: rc.cpp:1334
#, fuzzy, no-c-format
msgid "Local scope keywords:"
msgstr "關鍵字"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1302
#: rc.cpp:1337 rc.cpp:1343
#, no-c-format
msgid "Comma separated list of the local scope defining keywords"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1305
#: rc.cpp:1340 rc.cpp:1346
#, no-c-format
msgid ""
"Comma separated list of the local scope defining keywords. Other structure "
"group elements found under a structure node that was created based on a keyword "
"from this list are treated as local elements. For example if this list contains "
"<b>function</b>, it means that elements, like variables found under a <b>"
"function</b> are local, relative to the node that holds the <b>function</b>."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1362
#: rc.cpp:1372 rc.cpp:1381
#, no-c-format
msgid "A string specifying the end of a structure"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1365
#: rc.cpp:1375 rc.cpp:1384
#, no-c-format
msgid ""
"A string specifying the end of a structure, like <b>}</b> in many cases."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1373
#: rc.cpp:1378
#, no-c-format
msgid "Structure end:"
msgstr "結構結束:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1409
#: rc.cpp:1393
#, no-c-format
msgid "Complete class members after:"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1415
#: rc.cpp:1396 rc.cpp:1417
#, no-c-format
msgid "Regular expression to find out when to invoke member autocompletion"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1424
#: rc.cpp:1399
#, no-c-format
msgid ""
"Regular expression to find out when to invoke member autocompletion. "
"<br>\n"
"Example:"
"<br>\n"
"- we have a class called <b>foo</b> with some member variables"
"<br>\n"
"- the object of type <b>foo</b> is used in the document as $<b>objFoo</b>"
"<br>\n"
"- the members can appear as <b>$objFoo->member</b> or <b>$objFoo.member</b>\n"
"- in the above case this entry should look like <b>(?:-&gt;|\\.)$</b> "
"(autocomplete if the object is followed by <b>-&gt;</b> or <b>.</b>)"
"<br>\n"
" The regular expression must be terminated with <b>$</b> "
"(match end of line)."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1440
#: rc.cpp:1408
#, no-c-format
msgid "Complete attributes after:"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1446
#: rc.cpp:1411 rc.cpp:1414
#, no-c-format
msgid ""
"Autocomplete attributes after this character. See the information for the same "
"entry valid for tags."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1471
#: rc.cpp:1420
#, no-c-format
msgid ""
"Regular expression to find out when to invoke member autocompletion. "
"<br>\n"
"Example:"
"<br>\n"
"- we have a class called <b>foo</b> with some member variables"
"<br>\n"
"- the object of type <b>foo</b> is used in the document as $<b>objFoo</b>"
"<br>\n"
"- the members can appear as <b>$objFoo->member</b> or <b>$objFoo.member</b>\n"
"- in the above case this entry shoul look like <b>(?:-&gt;|\\.)$</b> "
"(autocomplete if the object is followed by <b>-&gt;</b> or <b>.</b>)"
"<br>\n"
" The regular expression must be terminated with <b>$</b> "
"(match end of line)."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1495
#: rc.cpp:1435
#, no-c-format
msgid "Attribute separator:"
msgstr "標籤屬性分隔符:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1501
#: rc.cpp:1438 rc.cpp:1484
#, no-c-format
msgid "The character specifying the end of an attribute"
msgstr "表示標籤屬性的結束的字元"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1504
#: rc.cpp:1441 rc.cpp:1487
#, no-c-format
msgid ""
"The character specifying the end of an attribute. By default it is <b>\"</b> "
"for XML DTEPs and <b>,</b> for pseudo DTEPs."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1524
#: rc.cpp:1451
#, no-c-format
msgid "Included DTEPs:"
msgstr "包含的 DTEP:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1530
#: rc.cpp:1454 rc.cpp:1490
#, no-c-format
msgid "Comma-separated list of DTEPs that can be present inside this DTEP"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1533
#: rc.cpp:1457 rc.cpp:1493
#, no-c-format
msgid ""
"Comma-separated list of DTEPs that can be present inside this DTEP. The list "
"consist usually of pseudo DTEPs."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1541
#: rc.cpp:1460
#, no-c-format
msgid "Autocomplete tags after:"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1547
#: rc.cpp:1463 rc.cpp:1469
#, no-c-format
msgid "The character after which the list of tags should be shown"
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1550
#: rc.cpp:1466
#, no-c-format
msgid ""
"The autocompletion box is brought up automatically once this character is "
"entered or space is pressed after this character."
"<br> For real DTEPs it's usually <b>&lt;</b>, but for example for the CSS "
"pseudo DTEP it is <b>{</b>. The text <b>none</b> instead of a character "
"specifies that the tag completion box should not be brought up automatically, "
"only if the user requests it."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1561
#: rc.cpp:1472
#, no-c-format
msgid ""
"The autocompletion box is brought up automatically once this character is "
"entered or space is pressed after this character"
"<br>. For real DTEPs it's usually <b>&lt;</b>, but for example for the CSS "
"pseudo DTEP it is <b>{</b>. The text <b>none</b> instead of a character "
"specifies that the tag completion box should not be brought up automatically, "
"only if the user requests it."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1577
#: rc.cpp:1475 rc.cpp:1481
#, no-c-format
msgid ""
"The character specifying the end of a tag. See the information for the "
"attribute separator for details."
msgstr ""
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1585
#: rc.cpp:1478
#, no-c-format
msgid "Tag separator:"
msgstr "標籤分隔符:"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1623
#: rc.cpp:1496
#, no-c-format
msgid "Structures"
msgstr "架構"
#. i18n: file ./dialogs/dtepeditdlgs.ui line 1634
#: rc.cpp:1499
#, no-c-format
msgid "Available groups:"
msgstr "可用的組別:"
#. i18n: file ./dialogs/dtdselectdialog.ui line 31
#: rc.cpp:1511 src/document.cpp:2931 src/quanta.cpp:3053
#, no-c-format
msgid "DTD Selector"
msgstr "DTD 選擇器"
#. i18n: file ./dialogs/dtdselectdialog.ui line 43
#: rc.cpp:1514
#, no-c-format
msgid ""
"Dialog message:\n"
"Dialog message2:"
msgstr ""
"對話框訊息:\n"
"對話框訊息2:"
#. i18n: file ./dialogs/dtdselectdialog.ui line 62
#: rc.cpp:1518
#, no-c-format
msgid "Current DTD:"
msgstr "目前的 DTD"
#. i18n: file ./dialogs/dtdselectdialog.ui line 70
#: rc.cpp:1521
#, no-c-format
msgid "Select DTD:"
msgstr "選擇 DTD"
#. i18n: file ./dialogs/dtdselectdialog.ui line 86
#: rc.cpp:1524
#, no-c-format
msgid "Conver&t the document to the selected DTD"
msgstr "把目前的文件的 DTD 都轉換成選擇的(&T)"
#. i18n: file ./dialogs/dtdselectdialog.ui line 94
#: rc.cpp:1527
#, no-c-format
msgid "Do not show this dialog, use the closest matching DTD"
msgstr "不要顯示這個對話框,直接使用最接近格式的 DTD"
#. i18n: file ./parts/kafka/kafkasyncoptionsui.ui line 24
#: rc.cpp:1530
#, no-c-format
msgid "Dual Views Mode Synchronization"
msgstr "雙檢視模式的同步處理"
#. i18n: file ./parts/kafka/kafkasyncoptionsui.ui line 66
#: rc.cpp:1533 rc.cpp:1542
#, no-c-format
msgid "ms"
msgstr "ms"
#. i18n: file ./parts/kafka/kafkasyncoptionsui.ui line 85
#: rc.cpp:1536
#, no-c-format
msgid "Refresh the VPL editor on click"
msgstr "按下後重新整理 VPL 編輯器"
#. i18n: file ./parts/kafka/kafkasyncoptionsui.ui line 93
#: rc.cpp:1539
#, no-c-format
msgid "Refresh the VPL editor every:"
msgstr "每次重新整理 VPL 編輯器的相隔時間:"
#. i18n: file ./parts/kafka/kafkasyncoptionsui.ui line 153
#: rc.cpp:1545
#, no-c-format
msgid "Refresh the source editor on click"
msgstr "按下後重新整理代碼編輯器"
#. i18n: file ./parts/kafka/kafkasyncoptionsui.ui line 161
#: rc.cpp:1548
#, no-c-format
msgid "Refresh the source editor every:"
msgstr "每次重新整理代碼編輯器的相隔時間:"
#. i18n: file ./parts/kafka/kafkasyncoptionsui.ui line 190
#: rc.cpp:1551
#, no-c-format
msgid "Show an icon where scripts are located"
msgstr "在指令稿的所在置顯示一個圖示"
#. i18n: file ./parts/kafka/htmldocumentpropertiesui.ui line 16
#: rc.cpp:1554
#, no-c-format
msgid "Document Properties"
msgstr "文件屬性"
#. i18n: file ./parts/kafka/htmldocumentpropertiesui.ui line 25
#: rc.cpp:1557
#, no-c-format
msgid "Column 1"
msgstr "欄 1"
#. i18n: file ./parts/kafka/htmldocumentpropertiesui.ui line 36
#: rc.cpp:1560
#, no-c-format
msgid "New Item"
msgstr "新的項目"
#. i18n: file ./parts/kafka/htmldocumentpropertiesui.ui line 79
#: rc.cpp:1563
#, no-c-format
msgid "Current DTD: "
msgstr "目前的 DTD"
#. i18n: file ./parts/kafka/htmldocumentpropertiesui.ui line 95
#: rc.cpp:1566
#, no-c-format
msgid "Title: "
msgstr "標題:"
#. i18n: file ./parts/kafka/htmldocumentpropertiesui.ui line 111
#: rc.cpp:1569
#, no-c-format
msgid "Link CSS stylesheet:"
msgstr "連結外部的 CSS 樣式表:"
#. i18n: file ./parts/kafka/htmldocumentpropertiesui.ui line 127
#: rc.cpp:1572
#, no-c-format
msgid "Meta items:"
msgstr "中介項目(Meta items):"
#. i18n: file ./parts/kafka/htmldocumentpropertiesui.ui line 160
#: rc.cpp:1575
#, no-c-format
msgid "CSS rules:"
msgstr "CSS 規則:"
#. i18n: file ./components/framewizard/fmrceditors.ui line 36
#: rc.cpp:1599
#, no-c-format
msgid "Rows Columns Editor"
msgstr "列 & 欄的編輯器"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 16
#: rc.cpp:1608
#, no-c-format
msgid "Frame Properties"
msgstr "框架屬性"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 80
#: rc.cpp:1617
#, no-c-format
msgid "Common"
msgstr "一般"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 132
#: rc.cpp:1629
#, no-c-format
msgid "Margins"
msgstr "邊界"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 177
#: rc.cpp:1632
#, no-c-format
msgid "From left:"
msgstr "從左方:"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 185
#: rc.cpp:1635 rc.cpp:1641
#, no-c-format
msgid "px"
msgstr "px"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 212
#: rc.cpp:1638
#, no-c-format
msgid "From top:"
msgstr "從上方:"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 237
#: rc.cpp:1644
#, no-c-format
msgid "Scrolling"
msgstr "捲動"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 262
#: rc.cpp:1650
#, no-c-format
msgid "Auto"
msgstr "自動"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 283
#: rc.cpp:1656
#, no-c-format
msgid "Resize"
msgstr "重新調整大小"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 352
#: rc.cpp:1665
#, no-c-format
msgid "Frame source:"
msgstr "框架來源:"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 360
#: rc.cpp:1668
#, no-c-format
msgid "Frame name:"
msgstr "框架名稱:"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 400
#: rc.cpp:1671
#, no-c-format
msgid "Others"
msgstr "其他"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 425
#: rc.cpp:1674
#, no-c-format
msgid "Id:"
msgstr "Id:"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 433
#: rc.cpp:1677
#, no-c-format
msgid "Class:"
msgstr "Class:"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 441
#: dialogs/tagdialogs/tagquicklistdlgdata.cpp:41 rc.cpp:1680
#, no-c-format
msgid "Style:"
msgstr "樣式:"
#. i18n: file ./components/framewizard/fmfpeditors.ui line 457
#: rc.cpp:1686
#, no-c-format
msgid "Long description:"
msgstr "詳細描述:"
#. i18n: file ./components/framewizard/framewizards.ui line 36
#: rc.cpp:1689
#, no-c-format
msgid "Frame Wizard"
msgstr "框架(Frame)精靈"
#. i18n: file ./components/framewizard/framewizards.ui line 184
#: rc.cpp:1701
#, no-c-format
msgid "Splitting"
msgstr "分割"
#. i18n: file ./components/framewizard/framewizards.ui line 244
#: rc.cpp:1710
#, no-c-format
msgid "Editing"
msgstr "編輯"
#. i18n: file ./components/framewizard/framewizards.ui line 261
#: rc.cpp:1713
#, no-c-format
msgid "Edit Frame"
msgstr "編輯框架"
#. i18n: file ./components/framewizard/framewizards.ui line 283
#: rc.cpp:1719 rc.cpp:5075 rc.cpp:5121
#, no-c-format
msgid "Reset"
msgstr "重設"
#. i18n: file ./components/csseditor/encodingselectors.ui line 16
#: rc.cpp:1722
#, no-c-format
msgid "Encoding Selector"
msgstr "編碼選擇器"
#. i18n: file ./components/csseditor/encodingselectors.ui line 43
#: rc.cpp:1725
#, no-c-format
msgid "Select encoding:"
msgstr "選擇編碼:"
#. i18n: file ./components/csseditor/cssselectors.ui line 16
#: rc.cpp:1734
#, no-c-format
msgid "CSS Selector Dialog"
msgstr "CSS 選擇器對話盒"
#. i18n: file ./components/csseditor/cssselectors.ui line 41
#: rc.cpp:1737
#, no-c-format
msgid "Apply to file:"
msgstr "套用到檔案:"
#. i18n: file ./components/csseditor/cssselectors.ui line 106
#: rc.cpp:1746
#, no-c-format
msgid "Tags"
msgstr "標籤"
#. i18n: file ./components/csseditor/cssselectors.ui line 150
#: rc.cpp:1749 rc.cpp:1782 rc.cpp:1806 rc.cpp:1830
#, no-c-format
msgid "Remove Selector"
msgstr "移除選擇器"
#. i18n: file ./components/csseditor/cssselectors.ui line 165
#: rc.cpp:1752 rc.cpp:1785 rc.cpp:1809 rc.cpp:1836
#, no-c-format
msgid "Selected"
msgstr "已選擇"
#. i18n: file ./components/csseditor/cssselectors.ui line 173
#: dialogs/actionconfigdialog.cpp:80 dialogs/actionconfigdialog.cpp:191
#: dialogs/actionconfigdialog.cpp:219 rc.cpp:1755 rc.cpp:1788 rc.cpp:1812
#: rc.cpp:1833 rc.cpp:1917
#, no-c-format
msgid "All"
msgstr "全部"
#. i18n: file ./components/csseditor/cssselectors.ui line 200
#: rc.cpp:1758
#, no-c-format
msgid "DTD Selection"
msgstr "DTD 選擇"
#. i18n: file ./components/csseditor/cssselectors.ui line 235
#: rc.cpp:1761 rc.cpp:1791 rc.cpp:1815 rc.cpp:1839
#, no-c-format
msgid "Add Selector"
msgstr "加入 Selector"
#. i18n: file ./components/csseditor/cssselectors.ui line 281
#: parts/kafka/htmldocumentproperties.cpp:97 parts/kafka/wkafkapart.cpp:68
#: rc.cpp:1767 rc.cpp:1776 rc.cpp:1800 rc.cpp:1824
#, no-c-format
msgid "Selector"
msgstr "Selector"
#. i18n: file ./components/csseditor/cssselectors.ui line 346
#: rc.cpp:1773
#, no-c-format
msgid "IDs"
msgstr "ID"
#. i18n: file ./components/csseditor/cssselectors.ui line 540
#: rc.cpp:1797
#, no-c-format
msgid "Classes"
msgstr "Classes"
#. i18n: file ./components/csseditor/cssselectors.ui line 734
#: rc.cpp:1821
#, no-c-format
msgid "Pseudo"
msgstr "Pseudo"
#. i18n: file ./components/csseditor/fontfamilychoosers.ui line 24
#: rc.cpp:1848
#, no-c-format
msgid "Font Family Chooser"
msgstr "字型家族選擇器"
#. i18n: file ./components/csseditor/fontfamilychoosers.ui line 78
#: rc.cpp:1851
#, no-c-format
msgid "Available system font families:"
msgstr "系統上可用的字型家族:"
#. i18n: file ./components/csseditor/fontfamilychoosers.ui line 101
#: rc.cpp:1854
#, no-c-format
msgid "Generic family:"
msgstr "一般家族:"
#. i18n: file ./components/csseditor/fontfamilychoosers.ui line 107
#: rc.cpp:1857
#, no-c-format
msgid "cursive"
msgstr "cursive"
#. i18n: file ./components/csseditor/fontfamilychoosers.ui line 112
#: rc.cpp:1860
#, no-c-format
msgid "fantasy"
msgstr "fantasy"
#. i18n: file ./components/csseditor/fontfamilychoosers.ui line 117
#: rc.cpp:1863
#, no-c-format
msgid "monospace"
msgstr "monospace"
#. i18n: file ./components/csseditor/fontfamilychoosers.ui line 122
#: rc.cpp:1866
#, no-c-format
msgid "sans-serif"
msgstr "sans-serif"
#. i18n: file ./components/csseditor/fontfamilychoosers.ui line 127
#: rc.cpp:1869
#, no-c-format
msgid "serif"
msgstr "serif"
#. i18n: file ./components/csseditor/fontfamilychoosers.ui line 332
#: rc.cpp:1872
#, no-c-format
msgid "Selected font families:"
msgstr "已選擇的字型家族:"
#. i18n: file ./components/csseditor/csseditors.ui line 16
#: rc.cpp:1881
#, no-c-format
msgid "CSS Editor"
msgstr "CSS 編輯器"
#. i18n: file ./components/csseditor/csseditors.ui line 89
#: rc.cpp:1890
#, no-c-format
msgid "Use shorthand form"
msgstr "使用簡略形式"
#. i18n: file ./components/csseditor/csseditors.ui line 137
#: rc.cpp:1893
#, no-c-format
msgid "Visual"
msgstr "Visual"
#. i18n: file ./components/csseditor/csseditors.ui line 175
#: rc.cpp:1899
#, no-c-format
msgid "Paged"
msgstr "Paged"
#. i18n: file ./components/csseditor/csseditors.ui line 210
#: rc.cpp:1905
#, no-c-format
msgid "Interactive"
msgstr "Interactive"
#. i18n: file ./components/csseditor/csseditors.ui line 245
#: rc.cpp:1911
#, no-c-format
msgid "Aural"
msgstr "Aural"
#. i18n: file ./components/cvsservice/cvsupdatetodlgs.ui line 25
#: rc.cpp:1926
#, no-c-format
msgid "CVS Update"
msgstr "CVS 更新"
#. i18n: file ./components/cvsservice/cvsupdatetodlgs.ui line 53
#: rc.cpp:1929
#, no-c-format
msgid "Update to &date ('yyyy-mm-dd'):"
msgstr "更新至日期 ('yyyy-mm-&dd'):"
#. i18n: file ./components/cvsservice/cvsupdatetodlgs.ui line 61
#: rc.cpp:1932
#, no-c-format
msgid "Update to &tag/branch:"
msgstr "更新至分支/標籤(&T):"
#. i18n: file ./components/cvsservice/cvscommitdlgs.ui line 25
#: rc.cpp:1941
#, no-c-format
msgid "CVS Commit "
msgstr "CVS 提交 "
#. i18n: file ./components/cvsservice/cvscommitdlgs.ui line 41
#: rc.cpp:1944
#, no-c-format
msgid "Commit the following files:"
msgstr "提交下列的檔案:"
#. i18n: file ./components/cvsservice/cvscommitdlgs.ui line 57
#: rc.cpp:1947
#, no-c-format
msgid "Older &messages:"
msgstr "以往的訊息(&M):"
#. i18n: file ./components/cvsservice/cvscommitdlgs.ui line 68
#: rc.cpp:1950
#, no-c-format
msgid "&Log message:"
msgstr "記錄訊息(&L):"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 16
#: rc.cpp:1959
#, no-c-format
msgid "DBGp Settings"
msgstr "DBGp 設定"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 78
#: rc.cpp:1965 rc.cpp:2138 rc.cpp:2335
#, no-c-format
msgid "Ca&ncel"
msgstr "取消(&N)"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 117
#: rc.cpp:1971 rc.cpp:2153
#, no-c-format
msgid "Connection Settings"
msgstr "連線設定"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 136
#: rc.cpp:1974 rc.cpp:2165
#, no-c-format
msgid "Listen port:"
msgstr "監聽的連接埠:"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 165
#: rc.cpp:1977
#, no-c-format
msgid "Request URL:"
msgstr "要求的 URL:"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 181
#: rc.cpp:1980 rc.cpp:2012 rc.cpp:2171
#, no-c-format
msgid "See \"What's This?\" for available variables"
msgstr "請查看 '這是什麼' 找出可用的變數"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 195
#: rc.cpp:1983 rc.cpp:2174
#, no-c-format
msgid ""
"%afn - Filename of the current script\n"
"%afd - Absolute directory of the current script\n"
"%afp - Absolute path (directory + filename) of the current script\n"
"\n"
"%rfpd - Directory of the current script relative to project root\n"
"%rfpp - Path of the current script relative to project root\n"
"\n"
"%rfdd - Directory of the current script relative to document root\n"
"%rfdp - Path of the current script relative to document root\n"
"\n"
"%apd - Project root\n"
"%add - Document root of current script"
msgstr ""
"%afn - 目前指令稿的檔案名稱\n"
"%afd - 指令稿所在目錄的絕對路徑\n"
"%afp - 指令稿的絕對路徑(目錄 + 檔案名稱)\n"
"\n"
"%rfpd - 指令稿所在目錄的相對路徑 -- 相對於專案根目錄\n"
"%rfpp - 指令稿的相對路徑 -- 相對於專案根目錄\n"
"\n"
"%rfdd - 指令稿所在目錄的相對路徑 -- 相對於文件根目錄\n"
"%rfdp - 指令稿的相對路徑 -- 相對於文件根目錄\n"
"\n"
"%apd - 專案根目錄\n"
"%add - 目前指令稿的文件根目錄"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 222
#: rc.cpp:1997 rc.cpp:2144 rc.cpp:2273 rc.cpp:2276
#, no-c-format
msgid "Directory Mapping"
msgstr "目錄對應"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 254
#: rc.cpp:2000 rc.cpp:2147 rc.cpp:2282
#, no-c-format
msgid "Server basedir:"
msgstr "伺服器的基底目錄:"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 305
#: rc.cpp:2003 rc.cpp:2150 rc.cpp:2279
#, no-c-format
msgid "Local basedir:"
msgstr "本地基底目錄:"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 321
#: rc.cpp:2006
#, no-c-format
msgid "Local project:"
msgstr "本地專案:"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 331
#: rc.cpp:2009
#, no-c-format
msgid "Profiling"
msgstr "Profiling"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 355
#: rc.cpp:2015
#, no-c-format
msgid ""
"Path to the profiler output\n"
"%a - Appid as returned from the debugger\n"
"%c - CRC32 of the initial filepath"
msgstr ""
"Profiler 輸出的路徑\n"
"%a - 從除錯器傳回的 Appid\n"
"%c - 最初檔案路徑的 CRC32"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 371
#: rc.cpp:2020
#, no-c-format
msgid "Profiler output:"
msgstr "Profiler 輸出:"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 387
#: rc.cpp:2023
#, no-c-format
msgid "Map profiler output:"
msgstr ""
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 409
#: rc.cpp:2026
#, no-c-format
msgid ""
"If this checkbox is checked, the profiler output filename will be mapped using "
"the basedirs just like the remote script files."
msgstr ""
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 425
#: rc.cpp:2029
#, no-c-format
msgid "Open automatically:"
msgstr "自動開啟:"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 447
#: rc.cpp:2032
#, no-c-format
msgid ""
"If this checkbox is checked, the profiler output will be opened automatically "
"once the session ends."
msgstr ""
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 459
#: rc.cpp:2035 rc.cpp:2194
#, no-c-format
msgid "Deb&ug Behavior"
msgstr "除錯行為(&U)"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 470
#: rc.cpp:2038 rc.cpp:2197
#, no-c-format
msgid "Error Handling"
msgstr "錯誤處理"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 489
#: rc.cpp:2041 rc.cpp:2200
#, no-c-format
msgid "User errors"
msgstr "使用者錯誤"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 497
#: rc.cpp:2044 rc.cpp:2203
#, no-c-format
msgid "Break on:"
msgstr "中斷於:"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 516
#: rc.cpp:2047 rc.cpp:2206
#, no-c-format
msgid "User warnings"
msgstr "使用者警告"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 532
#: rc.cpp:2050 rc.cpp:2209
#, no-c-format
msgid "User notices"
msgstr "使用者提示"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 548
#: rc.cpp:2053 rc.cpp:2212
#, no-c-format
msgid "Notices"
msgstr "提示"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 564
#: rc.cpp:2056 rc.cpp:2215
#, no-c-format
msgid "W&arnings"
msgstr "警告(&A)"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 574
#: rc.cpp:2059 rc.cpp:2218
#, no-c-format
msgid "Execution"
msgstr "執行動作"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 583
#: components/debugger/interfaces/debuggerclient.cpp:53 rc.cpp:2062
#: rc.cpp:2227
#, no-c-format
msgid "Pause"
msgstr "暫停"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 591
#: components/debugger/interfaces/debuggerclient.cpp:84 rc.cpp:2065
#: rc.cpp:2233
#, no-c-format
msgid "Run"
msgstr "執行"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 606
#: rc.cpp:2068 rc.cpp:2236
#, no-c-format
msgid "Default mode:"
msgstr "預設模式:"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 657
#: rc.cpp:2074
#, no-c-format
msgid "<h4>DBGp Plugin for Quanta +</h4>"
msgstr "<h4>DBGp Plugin for Quanta +</h4>"
#. i18n: file ./components/debugger/dbgp/dbgpsettingss.ui line 675
#: rc.cpp:2077
#, no-c-format
msgid ""
"<html><head><meta name=\"qrichtext\" content=\"1\" /></head>"
"<body style=\"font-size:10pt;font-family:Bitstream Vera Sans\">\n"
"<p><span style=\"font-weight:600\">About</span></p>\n"
"<p>DBGp is a debugger protocol defined by the developers of Xdebug. This plugin "
"integrates debuggers that supports the DBGp protocol with Quanta. </p>\n"
"<p>In order to use this plugin for PHP debugging, you need to get a supporting "
"debugger. Currently, only <a href=\"http://xdebug.org\">Xdebug</a> "
"is tested.</p>\n"
"<p>For more info about Xdebug, please visit the Xdebug website at <a "
"href=\"http://xdebug.org\">http://xdebug.org</a> </p>\n"
"<p><span style=\"font-weight:600\">Technical Details</span></p>\n"
"<p>This version of the debugger supports version %PROTOCOLVERSION% of the DBGp "
"protocol. </p>\n"
"</body></html>"
msgstr ""
#. i18n: file ./components/debugger/conditionalbreakpointdialogs.ui line 16
#: rc.cpp:2087
#, no-c-format
msgid "Add Conditional Breakpoint"
msgstr "加入條件中斷"
#. i18n: file ./components/debugger/conditionalbreakpointdialogs.ui line 38
#: rc.cpp:2090
#, no-c-format
msgid "Expression:"
msgstr "運算式:"
#. i18n: file ./components/debugger/conditionalbreakpointdialogs.ui line 110
#: rc.cpp:2099
#, no-c-format
msgid "Break When"
msgstr "中斷條件"
#. i18n: file ./components/debugger/conditionalbreakpointdialogs.ui line 121
#: rc.cpp:2102
#, no-c-format
msgid "When expression is true"
msgstr "當運算式為真時"
#. i18n: file ./components/debugger/conditionalbreakpointdialogs.ui line 129
#: rc.cpp:2105
#, no-c-format
msgid "When expression changes"
msgstr "當運算式改變時"
#. i18n: file ./components/debugger/conditionalbreakpointdialogs.ui line 189
#: rc.cpp:2108
#, no-c-format
msgid "Lit when a finding a single equal sign in expression (common error)"
msgstr ""
#. i18n: file ./components/debugger/conditionalbreakpointdialogs.ui line 197
#: rc.cpp:2111
#, fuzzy, no-c-format
msgid "Only Break In"
msgstr "專案名稱"
#. i18n: file ./components/debugger/conditionalbreakpointdialogs.ui line 216
#: rc.cpp:2114 rc.cpp:2925
#, no-c-format
msgid "File:"
msgstr "檔案:"
#. i18n: file ./components/debugger/conditionalbreakpointdialogs.ui line 235
#: rc.cpp:2117
#, no-c-format
msgid "Objects of class:"
msgstr "類別的物件:"
#. i18n: file ./components/debugger/conditionalbreakpointdialogs.ui line 254
#: rc.cpp:2120
#, no-c-format
msgid "Function:"
msgstr "函式:"
#. i18n: file ./components/debugger/conditionalbreakpointdialogs.ui line 275
#: rc.cpp:2123 rc.cpp:2126 rc.cpp:2129 rc.cpp:2847
#, no-c-format
msgid "x"
msgstr "x"
#. i18n: file ./components/debugger/gubed/gubedsettingss.ui line 16
#: rc.cpp:2132
#, no-c-format
msgid "Gubed Settings"
msgstr "Gubed 設定"
#. i18n: file ./components/debugger/gubed/gubedsettingss.ui line 253
#: rc.cpp:2156
#, no-c-format
msgid "Use proxy"
msgstr "使用 Proxy"
#. i18n: file ./components/debugger/gubed/gubedsettingss.ui line 269
#: rc.cpp:2159
#, no-c-format
msgid "Proxy host:"
msgstr "Proxy 主機:"
#. i18n: file ./components/debugger/gubed/gubedsettingss.ui line 285
#: rc.cpp:2162
#, no-c-format
msgid "Proxy port:"
msgstr "Proxy 埠號:"
#. i18n: file ./components/debugger/gubed/gubedsettingss.ui line 311
#: rc.cpp:2168
#, no-c-format
msgid "Mode"
msgstr "模式"
#. i18n: file ./components/debugger/gubed/gubedsettingss.ui line 347
#: rc.cpp:2188
#, no-c-format
msgid "&Add include"
msgstr "加入 Include (&A)"
#. i18n: file ./components/debugger/gubed/gubedsettingss.ui line 355
#: rc.cpp:2191
#, no-c-format
msgid "Start session:"
msgstr "開始工作階段:"
#. i18n: file ./components/debugger/gubed/gubedsettingss.ui line 526
#: rc.cpp:2221
#, no-c-format
msgid "Fast"
msgstr "快"
#. i18n: file ./components/debugger/gubed/gubedsettingss.ui line 567
#: rc.cpp:2224
#, no-c-format
msgid "Slow"
msgstr "慢"
#. i18n: file ./components/debugger/gubed/gubedsettingss.ui line 584
#: components/debugger/interfaces/debuggerclient.cpp:79 rc.cpp:2230
#, no-c-format
msgid "Trace"
msgstr "追蹤"
#. i18n: file ./components/debugger/gubed/gubedsettingss.ui line 618
#: rc.cpp:2239
#, no-c-format
msgid "Run speed:"
msgstr "執行速度:"
#. i18n: file ./components/debugger/gubed/gubedsettingss.ui line 652
#: rc.cpp:2245
#, no-c-format
msgid "<h4>Gubed PHP Debugger Plugin for Quanta +</h4>"
msgstr "<h4>Gubed PHP Debugger Plugin for Quanta +</h4>"
#. i18n: file ./components/debugger/gubed/gubedsettingss.ui line 692
#: rc.cpp:2248
#, no-c-format
msgid ""
"<html><head><meta name=\"qrichtext\" content=\"1\" /></head>"
"<body style=\"font-size:10pt;font-family:Bitstream Vera Sans\">\n"
"<p><span style=\"font-weight:600\">About</span></p>\n"
"<p>Gubed is a PHP debugger available for free through GPL. This plugin "
"integrates Gubed with Quanta. </p>\n"
"<p>In order to use this plugin for PHP debugging, you need to get the Quanta "
"package from the Gubed project page, <a "
"href=\"http://sourceforge.net/projects/gubed\">http://sourceforge.net/projects/g"
"ubed</a>, at SourceForge </p>\n"
"<p>For more info about Gubed, please visit the Gubed website at <a "
"href=\"http://gubed.sf.net\">http://gubed.sf.net</a> </p>\n"
"<p><span style=\"font-weight:600\">Technical Details</span></p>\n"
"<p>This version of the debugger supports the %PROTOCOLVERSION% version of the "
"Gubed protocol. </p>\n"
"</body></html>"
msgstr ""
#. i18n: file ./components/debugger/debuggervariablesets.ui line 16
#: components/debugger/debuggermanager.cpp:267
#: components/debugger/debuggermanager.cpp:270 rc.cpp:2258
#, no-c-format
msgid "Set Value of Variable"
msgstr "設定變數的數值"
#. i18n: file ./components/debugger/debuggervariablesets.ui line 110
#: rc.cpp:2267
#, no-c-format
msgid "Variable:"
msgstr "變數:"
#. i18n: file ./components/debugger/debuggervariablesets.ui line 126
#: components/debugger/variableslistview.cpp:262 rc.cpp:2270
#, no-c-format
msgid "New value:"
msgstr "新的數值:"
#. i18n: file ./components/debugger/pathmapperdialogs.ui line 74
#: rc.cpp:2285
#, no-c-format
msgid ""
"This is where the local part of path is specified. If a file is located on the "
"computer running Quanta at \"/home/user/htdocs/project/file.php\" and that file "
"is located on the server as \"/var/www/project/file.php\", local basedir should "
"be \"/home/user/htdocs/\" and server basedir should be \"/var/www/\".\n"
"The quanta will know that files starting with \"/home/user/project/\" on the "
"local computer, will start with \"/var/www/\" on the remote computer."
msgstr ""
#. i18n: file ./components/debugger/pathmapperdialogs.ui line 83
#: rc.cpp:2289
#, no-c-format
msgid ""
"This is where the server part of path is specified. If a file is located on the "
"computer running Quanta at \"/home/user/htdocs/project/file.php\" and that file "
"is located on the server as \"/var/www/project/file.php\", local basedir should "
"be \"/home/user/htdocs/\" and server basedir should be \"/var/www/\".\n"
"The quanta will know that files starting with \"/home/user/project/\" on the "
"local computer, will start with \"/var/www/\" on the remote computer."
msgstr ""
#. i18n: file ./components/debugger/pathmapperdialogs.ui line 157
#: rc.cpp:2299
#, fuzzy, no-c-format
msgid "Previous Mappings"
msgstr "上一個檔案(&P)"
#. i18n: file ./components/debugger/pathmapperdialogs.ui line 166
#: rc.cpp:2302
#, no-c-format
msgid "Local Directory"
msgstr "本地目錄"
#. i18n: file ./components/debugger/pathmapperdialogs.ui line 177
#: rc.cpp:2305
#, no-c-format
msgid "Server Directory"
msgstr "伺服器目錄"
#. i18n: file ./components/debugger/pathmapperdialogs.ui line 202
#: rc.cpp:2308
#, no-c-format
msgid "This is a list of previously used mappings. Click on one to use it"
msgstr ""
#. i18n: file ./components/debugger/pathmapperdialogs.ui line 212
#: rc.cpp:2311
#, no-c-format
msgid "Sample"
msgstr "樣本"
#. i18n: file ./components/debugger/pathmapperdialogs.ui line 231
#: rc.cpp:2314
#, no-c-format
msgid "Translates to:"
msgstr "轉譯成:"
#. i18n: file ./components/debugger/pathmapperdialogs.ui line 247
#: rc.cpp:2317
#, fuzzy, no-c-format
msgid "Original path:"
msgstr "編輯器"
#. i18n: file ./components/debugger/pathmapperdialogs.ui line 276
#: rc.cpp:2320
#, no-c-format
msgid "Indicates whether the translated path exists on disk or not"
msgstr ""
#. i18n: file ./components/debugger/pathmapperdialogs.ui line 279
#: rc.cpp:2323
#, no-c-format
msgid ""
"This indicator tells you whether the translated path exists on local disk or "
"not."
msgstr ""
#. i18n: file ./components/debugger/pathmapperdialogs.ui line 297
#: rc.cpp:2326
#, no-c-format
msgid ""
"This field shows what the \"original path\" above will look like after "
"translation."
msgstr ""
#. i18n: file ./components/debugger/pathmapperdialogs.ui line 315
#: rc.cpp:2329
#, no-c-format
msgid "This field shows the path currently needing to be translated."
msgstr ""
#. i18n: file ./components/tableeditor/tableeditors.ui line 16
#: rc.cpp:2332
#, no-c-format
msgid "Table Editor"
msgstr "表格編輯器"
#. i18n: file ./components/tableeditor/tableeditors.ui line 75
#: rc.cpp:2344
#, no-c-format
msgid "F1"
msgstr "F1"
#. i18n: file ./components/tableeditor/tableeditors.ui line 90
#: rc.cpp:2347
#, no-c-format
msgid "&Main"
msgstr "主要(&M)"
#. i18n: file ./components/tableeditor/tableeditors.ui line 101
#: rc.cpp:2350
#, no-c-format
msgid "Ta&ble data:"
msgstr "表格資料(&B)"
#. i18n: file ./components/tableeditor/tableeditors.ui line 185
#: rc.cpp:2353
#, no-c-format
msgid "Co&lumns:"
msgstr "欄(&L):"
#. i18n: file ./components/tableeditor/tableeditors.ui line 201
#: rc.cpp:2356
#, no-c-format
msgid "Bod&y Properties"
msgstr "表格身部(Bod&y)屬性..."
#. i18n: file ./components/tableeditor/tableeditors.ui line 209
#: rc.cpp:2359
#, no-c-format
msgid "&Table Properties"
msgstr "表格屬性(&T)"
#. i18n: file ./components/tableeditor/tableeditors.ui line 225
#: rc.cpp:2362
#, no-c-format
msgid "C&aption:"
msgstr "標題(&A)"
#. i18n: file ./components/tableeditor/tableeditors.ui line 236
#: rc.cpp:2365
#, no-c-format
msgid "&Rows:"
msgstr "行(&R):"
#. i18n: file ./components/tableeditor/tableeditors.ui line 260
#: rc.cpp:2368
#, no-c-format
msgid "Header"
msgstr "表格頭部"
#. i18n: file ./components/tableeditor/tableeditors.ui line 339
#: rc.cpp:2371
#, no-c-format
msgid "Header &rows:"
msgstr "表頭列數(&R)"
#. i18n: file ./components/tableeditor/tableeditors.ui line 358
#: rc.cpp:2374
#, no-c-format
msgid "Header co&lumns:"
msgstr "表頭欄數(&L)"
#. i18n: file ./components/tableeditor/tableeditors.ui line 369
#: rc.cpp:2377
#, no-c-format
msgid "Header &data:"
msgstr "表頭資料(&D)"
#. i18n: file ./components/tableeditor/tableeditors.ui line 382
#: rc.cpp:2380
#, no-c-format
msgid "Insert ta&ble header"
msgstr "插入表格頭部(&B)"
#. i18n: file ./components/tableeditor/tableeditors.ui line 410
#: rc.cpp:2383
#, no-c-format
msgid "&Header Properties"
msgstr "表頭屬性(&H)"
#. i18n: file ./components/tableeditor/tableeditors.ui line 420
#: rc.cpp:2386
#, no-c-format
msgid "Footer"
msgstr "表格尾部"
#. i18n: file ./components/tableeditor/tableeditors.ui line 485
#: rc.cpp:2389
#, no-c-format
msgid "Footer &rows:"
msgstr "表尾列數(&R)"
#. i18n: file ./components/tableeditor/tableeditors.ui line 504
#: rc.cpp:2392
#, no-c-format
msgid "Footer co&lumns:"
msgstr "表尾欄數(&L)"
#. i18n: file ./components/tableeditor/tableeditors.ui line 515
#: rc.cpp:2395
#, no-c-format
msgid "Footer &data:"
msgstr "表尾資料(&D):"
#. i18n: file ./components/tableeditor/tableeditors.ui line 545
#: rc.cpp:2398
#, no-c-format
msgid "Insert ta&ble footer"
msgstr "插入表格尾部(&B)"
#. i18n: file ./components/tableeditor/tableeditors.ui line 573
#: rc.cpp:2401
#, no-c-format
msgid "&Footer Properties"
msgstr "表尾屬性(&F)"
#. i18n: file ./treeviews/fileinfodlg.ui line 32
#: rc.cpp:2404
#, no-c-format
msgid "Number of lines:"
msgstr "行數:"
#. i18n: file ./treeviews/fileinfodlg.ui line 40
#: rc.cpp:2407
#, no-c-format
msgid "Number of images included:"
msgstr "包含的圖片數目:"
#. i18n: file ./treeviews/fileinfodlg.ui line 48
#: rc.cpp:2410
#, no-c-format
msgid "Size of the included images:"
msgstr "包含的圖片大小:"
#. i18n: file ./treeviews/fileinfodlg.ui line 56
#: rc.cpp:2413
#, no-c-format
msgid "Total file size:"
msgstr "總共檔案大小:"
#. i18n: file ./treeviews/fileinfodlg.ui line 72
#: rc.cpp:2416
#, no-c-format
msgid "Included images:"
msgstr "包含的圖片:"
#. i18n: file ./treeviews/fileinfodlg.ui line 80
#: rc.cpp:2419 rc.cpp:3900 treeviews/basetreeview.cpp:512
#, no-c-format
msgid "Description:"
msgstr "描述:"
#. i18n: file ./treeviews/quantapropertiespage.ui line 39
#: rc.cpp:2422
#, no-c-format
msgid "Quanta Properties"
msgstr "Quanta 屬性"
#. i18n: file ./treeviews/quantapropertiespage.ui line 65
#: rc.cpp:2425
#, no-c-format
msgid "&Inherit type from parent (nothing)"
msgstr "從上層繼承類型(無)(&I)"
#. i18n: file ./treeviews/quantapropertiespage.ui line 73
#: rc.cpp:2428
#, no-c-format
msgid "&Type:"
msgstr "類型(&T)"
#. i18n: file ./treeviews/quantapropertiespage.ui line 117
#: rc.cpp:2431
#, no-c-format
msgid "Use &pre/post text"
msgstr "使用前綴/後綴文字(&P)"
#. i18n: file ./treeviews/quantapropertiespage.ui line 125
#: rc.cpp:2434
#, no-c-format
msgid "Pre-text:"
msgstr "前綴文字:"
#. i18n: file ./treeviews/quantapropertiespage.ui line 141
#: rc.cpp:2437
#, no-c-format
msgid "Post-text:"
msgstr "後綴文字:"
#. i18n: file ./treeviews/quantapropertiespage.ui line 189
#: rc.cpp:2440
#, no-c-format
msgid "Filtering &action:"
msgstr "過濾動作(&A):"
#. i18n: file ./treeviews/templatedirform.ui line 26
#: rc.cpp:2443
#, no-c-format
msgid "Create Template Folder"
msgstr "建立範本目錄"
#. i18n: file ./treeviews/templatedirform.ui line 63
#: rc.cpp:2452
#, no-c-format
msgid "&Inherit parent attribute"
msgstr "從上層繼承標籤屬性(&I)"
#. i18n: file ./parsers/dtd/dtepcreationdlg.ui line 31
#: parsers/dtd/dtdparser.cpp:110 rc.cpp:2461
#, no-c-format
msgid "DTD - > DTEP Conversion"
msgstr "DTD - > DTEP 轉換"
#. i18n: file ./parsers/dtd/dtepcreationdlg.ui line 55
#: rc.cpp:2464
#, no-c-format
msgid "Name: "
msgstr "名稱:"
#. i18n: file ./parsers/dtd/dtepcreationdlg.ui line 63
#: rc.cpp:2467 rc.cpp:2661
#, no-c-format
msgid "Nickname:"
msgstr "別名:"
#. i18n: file ./parsers/dtd/dtepcreationdlg.ui line 71
#: rc.cpp:2470
#, no-c-format
msgid "!DOCTYPE definition line:"
msgstr "!DOCTYPE 定義行:"
#. i18n: file ./parsers/dtd/dtepcreationdlg.ui line 94
#: rc.cpp:2473
#, no-c-format
msgid "DTD URL:"
msgstr "DTD URL:"
#. i18n: file ./parsers/dtd/dtepcreationdlg.ui line 102
#: rc.cpp:2476
#, no-c-format
msgid "Target directory name:"
msgstr "目標目錄名稱:"
#. i18n: file ./parsers/dtd/dtepcreationdlg.ui line 110
#: rc.cpp:2479
#, no-c-format
msgid "Default extension:"
msgstr "預設副檔名:"
#. i18n: file ./parsers/dtd/dtepcreationdlg.ui line 123
#: rc.cpp:2482
#, no-c-format
msgid "Case-sensitive tags and attributes"
msgstr "區分大小寫的標籤及標籤屬性"
#. i18n: file ./parsers/dtd/dtepcreationdlg.ui line 134
#: rc.cpp:2485
#, no-c-format
msgid "&Fine-tune the DTEP after conversion"
msgstr "轉換後微調 DTEP (&F)"
#. i18n: file ./plugins/pluginconfig.ui line 33
#: plugins/quantapluginconfig.cpp:40 rc.cpp:2488
#, no-c-format
msgid "Configure Plugin"
msgstr "設定外掛程式"
#. i18n: file ./plugins/pluginconfig.ui line 44
#: rc.cpp:2491
#, no-c-format
msgid "Validate plugin"
msgstr "檢驗外掛程式"
#. i18n: file ./plugins/pluginconfig.ui line 86
#: rc.cpp:2494
#, no-c-format
msgid "Plugin Options"
msgstr "外掛程式選項"
#. i18n: file ./plugins/pluginconfig.ui line 105
#: rc.cpp:2500
#, no-c-format
msgid "The plugin name as it appears in the Plugins menu."
msgstr "外掛程式選單的中顯示的名稱。"
#. i18n: file ./plugins/pluginconfig.ui line 141
#: rc.cpp:2503
#, no-c-format
msgid "Location:"
msgstr "位置:"
#. i18n: file ./plugins/pluginconfig.ui line 149
#: rc.cpp:2506
#, no-c-format
msgid ""
"The exact location of the plugin. If not set the global search paths setting is "
"used."
msgstr "外掛程式的實際路徑。不設定的話會以全域搜尋路徑尋找它。"
#. i18n: file ./plugins/pluginconfig.ui line 157
#: rc.cpp:2509
#, no-c-format
msgid "The plugin executable or library name (with extension)."
msgstr "外掛程式的執行檔或程式庫的名稱(含副檔名)。"
#. i18n: file ./plugins/pluginconfig.ui line 165
#: rc.cpp:2512 treeviews/basetreeview.cpp:1209
#: treeviews/projecttreeview.cpp:393
#, no-c-format
msgid "File name:"
msgstr "檔案名稱:"
#. i18n: file ./plugins/pluginconfig.ui line 186
#: rc.cpp:2515
#, no-c-format
msgid "Output window:"
msgstr "輸出視窗:"
#. i18n: file ./plugins/pluginconfig.ui line 208
#: rc.cpp:2521
#, no-c-format
msgid "&Read only part"
msgstr "唯讀部件(pa&rt)"
#. i18n: file ./plugins/pluginconfig.ui line 216
#: rc.cpp:2524
#, no-c-format
msgid "Input:"
msgstr "輸入資料:"
#. i18n: file ./plugins/pluginconfig.ui line 227
#: messages/annotationoutput.cpp:42 rc.cpp:2530
#, no-c-format
msgid "Current File"
msgstr "目前的檔案"
#. i18n: file ./plugins/pluginconfig.ui line 232
#: rc.cpp:2533
#, no-c-format
msgid "Current File Path"
msgstr "目前的檔案路徑"
#. i18n: file ./plugins/pluginconfig.ui line 237
#: rc.cpp:2536
#, no-c-format
msgid "Project Folder"
msgstr "專案目錄"
#. i18n: file ./plugins/plugineditor.ui line 32
#: plugins/quantaplugineditor.cpp:45 plugins/quantaplugininterface.cpp:260
#: rc.cpp:2539
#, no-c-format
msgid "Edit Plugins"
msgstr "編輯外掛程式"
#. i18n: file ./plugins/plugineditor.ui line 49
#: rc.cpp:2542
#, no-c-format
msgid "Search paths:"
msgstr "搜尋路徑:"
#. i18n: file ./plugins/plugineditor.ui line 57
#: rc.cpp:2545 treeviews/basetreeview.cpp:617
#, no-c-format
msgid "Plugins"
msgstr "外掛程式"
#. i18n: file ./plugins/plugineditor.ui line 83
#: rc.cpp:2551
#, no-c-format
msgid "Valid"
msgstr "有效"
#. i18n: file ./plugins/plugineditor.ui line 94
#: rc.cpp:2554
#, no-c-format
msgid "Location"
msgstr "位置"
#. i18n: file ./plugins/plugineditor.ui line 105
#: rc.cpp:2557 rc.cpp:5200
#, no-c-format
msgid "File Name"
msgstr "檔案名稱"
#. i18n: file ./plugins/plugineditor.ui line 116
#: rc.cpp:2560
#, no-c-format
msgid "Output Window"
msgstr "輸出視窗"
#. i18n: file ./plugins/plugineditor.ui line 145
#: rc.cpp:2566
#, no-c-format
msgid "Configure..."
msgstr "設定..."
#. i18n: file ./plugins/plugineditor.ui line 178
#: rc.cpp:2572 rc.cpp:5363
#, no-c-format
msgid "Refresh"
msgstr "重新整理"
#. i18n: file ./project/projectnewwebs.ui line 142
#: project/projectnewweb.cpp:140 project/projectnewweb.cpp:147
#: project/projectnewweb.cpp:157 project/projectnewweb.cpp:167 rc.cpp:2578
#, no-c-format
msgid "Start"
msgstr "開始"
#. i18n: file ./project/projectnewwebs.ui line 192
#: rc.cpp:2581
#, no-c-format
msgid "wget's command line:"
msgstr "wget 的命令列:"
#. i18n: file ./project/projectnewwebs.ui line 215
#: rc.cpp:2584
#, no-c-format
msgid "HTTP"
msgstr "HTTP"
#. i18n: file ./project/projectnewwebs.ui line 220
#: rc.cpp:2587
#, no-c-format
msgid "FTP"
msgstr "FTP"
#. i18n: file ./project/projectnewwebs.ui line 237
#: rc.cpp:2590
#, no-c-format
msgid "Protocol:"
msgstr "通訊協定:"
#. i18n: file ./project/projectnewwebs.ui line 250
#: rc.cpp:2593
#, no-c-format
msgid "Site source:"
msgstr "網站來源:"
#. i18n: file ./project/uploadprofiledlgs.ui line 26
#: project/uploadprofiles.cpp:90 rc.cpp:2596
#, no-c-format
msgid "Upload Profile"
msgstr "上傳 Profile"
#. i18n: file ./project/uploadprofiledlgs.ui line 42
#: rc.cpp:2599
#, no-c-format
msgid "&Host:"
msgstr "主機(&H)"
#. i18n: file ./project/uploadprofiledlgs.ui line 53
#: rc.cpp:2602
#, no-c-format
msgid "&User:"
msgstr "用戶(&U):"
#. i18n: file ./project/uploadprofiledlgs.ui line 64
#: rc.cpp:2605
#, no-c-format
msgid "Pa&th:"
msgstr "路徑(&T)"
#. i18n: file ./project/uploadprofiledlgs.ui line 75
#: rc.cpp:2608 rc.cpp:2667
#, no-c-format
msgid "Profile &name:"
msgstr "Profile 名稱(&N)"
#. i18n: file ./project/uploadprofiledlgs.ui line 86
#: rc.cpp:2611
#, no-c-format
msgid "Use as &default profile"
msgstr "用作預設的 Profile(&D)"
#. i18n: file ./project/uploadprofiledlgs.ui line 107
#: rc.cpp:2614
#, no-c-format
msgid "Pass&word:"
msgstr "密碼(&W)"
#. i18n: file ./project/uploadprofiledlgs.ui line 213
#: rc.cpp:2623
#, no-c-format
msgid "Po&rt:"
msgstr "連接埠(&R)"
#. i18n: file ./project/uploadprofiledlgs.ui line 232
#: rc.cpp:2626
#, no-c-format
msgid "&Store password on disc"
msgstr "把密碼儲存在磁碟上(&S)"
#. i18n: file ./project/uploadprofiledlgs.ui line 238
#: rc.cpp:2629
#, no-c-format
msgid "Keep the password in a file. DANGEROUS! Read the \"What's This?\" text."
msgstr "把密碼保存在一個檔案中。這是很危險的!請注意'這是什麼'的說明。"
#. i18n: file ./project/uploadprofiledlgs.ui line 243
#: rc.cpp:2632
#, no-c-format
msgid ""
"<qt>If you check this box, the password will be saved in the local Quanta "
"configuration file, so every time you start Quanta and load this project, the "
"password will be loaded and you don't have to enter it. Altough the local "
"configuration file is readable only by you and the password\n"
"is obscured, saving the password in any file is a security risk. Use this "
"option at your own risk."
"<br>\n"
"<i>Note:</i> due to the security concerns, the password is not present in the "
"project file, and moving the project files to another computer or uploading the "
"project to a server will not move/upload the password to the new place.</qt>"
msgstr ""
#. i18n: file ./project/uploadprofiledlgs.ui line 264
#: rc.cpp:2637
#, no-c-format
msgid "&Protocol:"
msgstr "通訊協定(&P)"
#. i18n: file ./project/membereditdlgs.ui line 52
#: rc.cpp:2646
#, no-c-format
msgid "E&dit Subprojects"
msgstr "編輯子專案(&D)"
#. i18n: file ./project/membereditdlgs.ui line 70
#: rc.cpp:2649
#, no-c-format
msgid "Tas&k:"
msgstr "任務(&K)"
#. i18n: file ./project/membereditdlgs.ui line 81
#: rc.cpp:2652
#, no-c-format
msgid "Subpro&ject:"
msgstr "子專案(&P)"
#. i18n: file ./project/membereditdlgs.ui line 92
#: rc.cpp:2655
#, no-c-format
msgid "&Role:"
msgstr "角色(&R)"
#. i18n: file ./project/membereditdlgs.ui line 103
#: rc.cpp:2658
#, no-c-format
msgid "&Email:"
msgstr "電子郵件(&E)"
#. i18n: file ./project/projectuploads.ui line 40
#: rc.cpp:2664
#, no-c-format
msgid "Upload Project Files"
msgstr "上傳專案檔案"
#. i18n: file ./project/projectuploads.ui line 103
#: rc.cpp:2670
#, no-c-format
msgid "New..."
msgstr "新增..."
#. i18n: file ./project/projectuploads.ui line 111
#: rc.cpp:2673
#, no-c-format
msgid "Edit..."
msgstr "編輯..."
#. i18n: file ./project/projectuploads.ui line 137
#: rc.cpp:2679
#, no-c-format
msgid "&Proceed"
msgstr "繼續(&P)"
#. i18n: file ./project/projectuploads.ui line 187
#: rc.cpp:2685
#, no-c-format
msgid "&Keep passwords in memory"
msgstr "把密碼存在記憶體中(&K)"
#. i18n: file ./project/projectuploads.ui line 217
#: rc.cpp:2688 rc.cpp:2838
#, no-c-format
msgid "&Invert"
msgstr "反向選擇(&I)"
#. i18n: file ./project/projectuploads.ui line 233
#: rc.cpp:2694
#, no-c-format
msgid "C&ollapse All"
msgstr "全部摺叠(&O)"
#. i18n: file ./project/projectuploads.ui line 241
#: rc.cpp:2697
#, no-c-format
msgid "U&pdate All"
msgstr "全部更新(&P)"
#. i18n: file ./project/projectuploads.ui line 244
#: rc.cpp:2700
#, no-c-format
msgid "This will cause all files to appear already uploaded"
msgstr "這會使得所有檔案看上去是已經上傳的"
#. i18n: file ./project/projectuploads.ui line 252
#: rc.cpp:2703
#, no-c-format
msgid "&Modified"
msgstr "修改過(&M)"
#. i18n: file ./project/projectuploads.ui line 260
#: rc.cpp:2706 rc.cpp:2832
#, no-c-format
msgid "E&xpand All"
msgstr "全部展開(&X)"
#. i18n: file ./project/projectuploads.ui line 289
#: rc.cpp:2709
#, no-c-format
msgid "Selection:"
msgstr "選擇:"
#. i18n: file ./project/projectuploads.ui line 305
#: rc.cpp:2712 rc.cpp:2826
#, no-c-format
msgid "&All"
msgstr "全部(&A)"
#. i18n: file ./project/projectuploads.ui line 313
#: rc.cpp:2715
#, no-c-format
msgid "Mark the selected files as uploaded instead of uploading them"
msgstr "把選取的檔案記下為'已上傳',但不上傳它們"
#. i18n: file ./project/projectuploads.ui line 339
#: rc.cpp:2718
#, no-c-format
msgid "Current: [none]"
msgstr "目前:[無]"
#. i18n: file ./project/projectuploads.ui line 358
#: project/projectupload.cpp:235 rc.cpp:2721
#, no-c-format
msgid "Total:"
msgstr "總共:"
#. i18n: file ./project/projectnewfinals.ui line 121
#: rc.cpp:2724
#, no-c-format
msgid "Prefix:"
msgstr "前綴:"
#. i18n: file ./project/projectnewfinals.ui line 134
#: rc.cpp:2727 rc.cpp:3009
#, no-c-format
msgid "Project Defaults"
msgstr "專案預設"
#. i18n: file ./project/projectnewfinals.ui line 151
#: rc.cpp:2730
#, no-c-format
msgid "Default DTD:"
msgstr "預設 DTD"
#. i18n: file ./project/projectnewfinals.ui line 170
#: rc.cpp:2733
#, no-c-format
msgid "Default encoding:"
msgstr "預設編碼:"
#. i18n: file ./project/projectnewfinals.ui line 185
#: rc.cpp:2736
#, no-c-format
msgid "Insert &local templates"
msgstr "插入本地範本(&L)"
#. i18n: file ./project/projectnewfinals.ui line 193
#: rc.cpp:2739
#, no-c-format
msgid "Insert &global templates"
msgstr "插入全域範本(&G)"
#. i18n: file ./project/projectnewfinals.ui line 201
#: rc.cpp:2742
#, fuzzy, no-c-format
msgid "Use preview prefi&x"
msgstr "預覽字首"
#. i18n: file ./project/projectnewfinals.ui line 209
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:62 rc.cpp:2745
#, no-c-format
msgid "Author:"
msgstr "作者:"
#. i18n: file ./project/projectnewfinals.ui line 264
#: rc.cpp:2748
#, no-c-format
msgid "Email:"
msgstr "電子郵件:"
#. i18n: file ./project/subprojecteditdlgs.ui line 35
#: rc.cpp:2754
#, no-c-format
msgid "The relative path of the subproject folder inside the project."
msgstr "專案內的子專案資料夾的相對路徑。"
#. i18n: file ./project/subprojecteditdlgs.ui line 48
#: rc.cpp:2757
#, no-c-format
msgid "&Location:"
msgstr "位置(&L)"
#. i18n: file ./project/subprojecteditdlgs.ui line 59
#: rc.cpp:2760
#, no-c-format
msgid "&Create new subproject"
msgstr "建立新的子專案(&C)"
#. i18n: file ./project/subprojecteditdlgs.ui line 62
#: rc.cpp:2763
#, no-c-format
msgid ""
"Check this if you want to create a new subproject with the above entered data."
msgstr ""
#. i18n: file ./project/teammembersdlgs.ui line 24
#: rc.cpp:2766
#, no-c-format
msgid "&Mailing list:"
msgstr "郵件列表(&M)"
#. i18n: file ./project/teammembersdlgs.ui line 40
#: rc.cpp:2769
#, no-c-format
msgid "You are:"
msgstr "您是:"
#. i18n: file ./project/teammembersdlgs.ui line 53
#: project/teammembersdlg.cpp:247 rc.cpp:2772
#, no-c-format
msgid "Please select your identity from the member list."
msgstr "請在成員列表中選擇您的身份。"
#. i18n: file ./project/teammembersdlgs.ui line 64
#: rc.cpp:2775
#, no-c-format
msgid "&Team Members"
msgstr "小組成員(&T)"
#. i18n: file ./project/teammembersdlgs.ui line 100
#: rc.cpp:2787
#, no-c-format
msgid "Nickname"
msgstr "別名"
#. i18n: file ./project/teammembersdlgs.ui line 111
#: rc.cpp:2790
#, no-c-format
msgid "Email"
msgstr "電子郵件"
#. i18n: file ./project/teammembersdlgs.ui line 122
#: rc.cpp:2793
#, no-c-format
msgid "Role"
msgstr "角色"
#. i18n: file ./project/teammembersdlgs.ui line 133
#: rc.cpp:2796
#, no-c-format
msgid "Task"
msgstr "任務"
#. i18n: file ./project/teammembersdlgs.ui line 144
#: rc.cpp:2799
#, no-c-format
msgid "Subproject"
msgstr "子專案"
#. i18n: file ./project/teammembersdlgs.ui line 187
#: rc.cpp:2805
#, no-c-format
msgid "Set to &Yourself"
msgstr "設為自己(&Y)"
#. i18n: file ./project/rescanprjdir.ui line 39
#: rc.cpp:2808
#, no-c-format
msgid "MyDialog"
msgstr "MyDialog"
#. i18n: file ./project/rescanprjdir.ui line 58
#: project/rescanprj.cpp:244 rc.cpp:2811
#, no-c-format
msgid "Progress:"
msgstr "進度:"
#. i18n: file ./project/rescanprjdir.ui line 79
#: rc.cpp:2814
#, no-c-format
msgid "<b>Add New Files in Project</b>"
msgstr "<b>加入新檔案至專案</b>"
#. i18n: file ./project/rescanprjdir.ui line 138
#: rc.cpp:2823
#, no-c-format
msgid "Co&llapse All"
msgstr "全部摺叠(&L)"
#. i18n: file ./project/uploadprofilespage.ui line 46
#: rc.cpp:2841
#, no-c-format
msgid "Default profile:"
msgstr "預設 Profile"
#. i18n: file ./project/uploadprofilespage.ui line 62
#: rc.cpp:2844
#, no-c-format
msgid "Edit Profiles"
msgstr "編輯 Profile"
#. i18n: file ./project/uploadprofilespage.ui line 86
#: rc.cpp:2850
#, no-c-format
msgid "Show a &treeview for each profile"
msgstr "為每個 Profile 顯示樹狀(&T)"
#. i18n: file ./project/eventeditordlgs.ui line 49
#: rc.cpp:2853
#, no-c-format
msgid "Event:"
msgstr "事件:"
#. i18n: file ./project/eventeditordlgs.ui line 78
#: rc.cpp:2856
#, no-c-format
msgid "Action:"
msgstr "動作:"
#. i18n: file ./project/eventeditordlgs.ui line 107
#: rc.cpp:2859
#, no-c-format
msgid "Argument 1:"
msgstr "引數 1:"
#. i18n: file ./project/eventeditordlgs.ui line 139
#: rc.cpp:2862
#, no-c-format
msgid "Argument 2:"
msgstr "引數 2:"
#. i18n: file ./project/eventeditordlgs.ui line 171
#: rc.cpp:2865
#, no-c-format
msgid "Argument 3:"
msgstr "引數 3:"
#. i18n: file ./project/eventeditordlgs.ui line 187
#: rc.cpp:2868
#, no-c-format
msgid "Argument 4:"
msgstr "引數 4:"
#. i18n: file ./project/projectnewlocals.ui line 107
#: rc.cpp:2871
#, no-c-format
msgid "Insert files from"
msgstr "插入檔案自"
#. i18n: file ./project/projectnewlocals.ui line 123
#: rc.cpp:2874
#, no-c-format
msgid "Included files:"
msgstr "包含檔案:"
#. i18n: file ./project/projectnewlocals.ui line 142
#: rc.cpp:2877
#, no-c-format
msgid "Filters"
msgstr "篩選器"
#. i18n: file ./project/projectnewlocals.ui line 159
#: rc.cpp:2880
#, no-c-format
msgid "Insert files with the following &mask:"
msgstr "插入通過 &mask 的檔案:"
#. i18n: file ./project/projectnewlocals.ui line 175
#: rc.cpp:2883
#, no-c-format
msgid "Insert onl&y markup, script and image files"
msgstr "只插入網頁、指令或圖片檔案(&Y)"
#. i18n: file ./project/projectnewlocals.ui line 236
#: rc.cpp:2886
#, no-c-format
msgid "&Add Files..."
msgstr "加入檔案(&A)..."
#. i18n: file ./project/projectnewlocals.ui line 244
#: rc.cpp:2889
#, no-c-format
msgid "A&dd Folder..."
msgstr "加入目錄(&D)..."
#. i18n: file ./project/projectnewlocals.ui line 252
#: rc.cpp:2892
#, no-c-format
msgid "&Clear List"
msgstr "清除列表(&C)"
#. i18n: file ./project/projectnewgenerals.ui line 121
#: rc.cpp:2895
#, no-c-format
msgid "Directory Settings"
msgstr "目錄設定"
#. i18n: file ./project/projectnewgenerals.ui line 137
#: rc.cpp:2898
#, no-c-format
msgid "Templates directory:"
msgstr "範本目錄:"
#. i18n: file ./project/projectnewgenerals.ui line 170
#: rc.cpp:2904
#, no-c-format
msgid "Toolbars directory:"
msgstr "工具列目錄:"
#. i18n: file ./project/projectnewgenerals.ui line 220
#: rc.cpp:2913
#, no-c-format
msgid "Main directory:"
msgstr "主目錄:"
#. i18n: file ./project/projectnewgenerals.ui line 240
#: rc.cpp:2916
#, no-c-format
msgid "Project Sources"
msgstr "專案的來源"
#. i18n: file ./project/projectnewgenerals.ui line 257
#: rc.cpp:2919
#, no-c-format
msgid "&Add local or remote files"
msgstr "加入本地或遠端檔案((&A)"
#. i18n: file ./project/projectnewgenerals.ui line 268
#: rc.cpp:2922
#, no-c-format
msgid "&Use wget to download files from a site"
msgstr "使用 wget 下載站台的檔案(&U)"
#. i18n: file ./project/projectnewgenerals.ui line 297
#: rc.cpp:2931
#, no-c-format
msgid "Server Settings"
msgstr "伺服器設定"
#. i18n: file ./project/projectnewgenerals.ui line 308
#: rc.cpp:2934
#, no-c-format
msgid "Protocol: "
msgstr "通訊協定:"
#. i18n: file ./project/projectnewgenerals.ui line 321
#: rc.cpp:2937
#, no-c-format
msgid "Password:"
msgstr "密碼:"
#. i18n: file ./project/projectnewgenerals.ui line 343
#: project/projectnewgeneral.cpp:65 project/projectnewgeneral.cpp:129
#: project/projectnewgeneral.cpp:203 project/projectprivate.cpp:739
#: rc.cpp:2940
#, no-c-format
msgid "Local"
msgstr "本地"
#. i18n: file ./project/projectnewgenerals.ui line 382
#: rc.cpp:2943
#, no-c-format
msgid "Port:"
msgstr "埠號:"
#. i18n: file ./project/projectnewgenerals.ui line 398
#: rc.cpp:2946
#, no-c-format
msgid "Host:"
msgstr "主機:"
#. i18n: file ./project/projectnewgenerals.ui line 409
#: rc.cpp:2949
#, no-c-format
msgid "User:"
msgstr "使用者:"
#. i18n: file ./project/eventconfigurationdlgs.ui line 24
#: rc.cpp:2952
#, no-c-format
msgid "Ena&ble the event actions"
msgstr "啟用事件動作(&B)"
#. i18n: file ./project/eventconfigurationdlgs.ui line 35
#: rc.cpp:2955
#, no-c-format
msgid "Configure Events"
msgstr "設定事件"
#. i18n: file ./project/eventconfigurationdlgs.ui line 46
#: rc.cpp:2958
#, no-c-format
msgid "&Add"
msgstr "加入(&A)"
#. i18n: file ./project/eventconfigurationdlgs.ui line 77
#: rc.cpp:2964
#, no-c-format
msgid "Event"
msgstr "事件"
#. i18n: file ./project/eventconfigurationdlgs.ui line 88
#: rc.cpp:2967
#, no-c-format
msgid "Action"
msgstr "動作"
#. i18n: file ./project/eventconfigurationdlgs.ui line 99
#: rc.cpp:2970
#, no-c-format
msgid "Argument 1"
msgstr "引數 1"
#. i18n: file ./project/eventconfigurationdlgs.ui line 110
#: rc.cpp:2973
#, no-c-format
msgid "Argument 2"
msgstr "引數 2"
#. i18n: file ./project/eventconfigurationdlgs.ui line 121
#: rc.cpp:2976
#, no-c-format
msgid "Argument 3"
msgstr "引數 3"
#. i18n: file ./project/eventconfigurationdlgs.ui line 132
#: rc.cpp:2979
#, no-c-format
msgid "Argument 4"
msgstr "引數 4"
#. i18n: file ./project/projectoptions.ui line 33
#: rc.cpp:2985
#, no-c-format
msgid "Project Options"
msgstr "專案選項"
#. i18n: file ./project/projectoptions.ui line 188
#: rc.cpp:2994
#, no-c-format
msgid "Project &name:"
msgstr "專案名稱(&N)"
#. i18n: file ./project/projectoptions.ui line 199
#: rc.cpp:2997
#, no-c-format
msgid "&Templates folder:"
msgstr "範本目錄(&T)"
#. i18n: file ./project/projectoptions.ui line 216
#: rc.cpp:3000
#, no-c-format
msgid "T&oolbars folder:"
msgstr "工具列目錄(&O)"
#. i18n: file ./project/projectoptions.ui line 235
#: rc.cpp:3003
#, no-c-format
msgid "&Author:"
msgstr "作者(&A)"
#. i18n: file ./project/projectoptions.ui line 254
#: rc.cpp:3006
#, no-c-format
msgid "E&mail:"
msgstr "電子郵件(&M)"
#. i18n: file ./project/projectoptions.ui line 295
#: rc.cpp:3015
#, no-c-format
msgid "Default &view:"
msgstr "預設檢視(&V)"
#. i18n: file ./project/projectoptions.ui line 312
#: rc.cpp:3018
#, no-c-format
msgid "Default &encoding:"
msgstr "預設編碼(&E)"
#. i18n: file ./project/projectoptions.ui line 343
#: rc.cpp:3024
#, no-c-format
msgid "E&xclude from project:"
msgstr "從專案中排除/忽略:"
#. i18n: file ./project/projectoptions.ui line 354
#: rc.cpp:3027
#, no-c-format
msgid "Exclude &files listed in .cvsignore"
msgstr "排除/忽略在 .cvsignore 中列出的檔案"
#. i18n: file ./project/projectoptions.ui line 358
#: rc.cpp:3030
#, no-c-format
msgid ""
"The files listed in <i>.cvsignore</i> files will not appear in the project "
"tree, nor will be shown when you rescan the project folder or upload the "
"project. Files matching the <i>.cvsignore</i> entries that were already present "
"in the project will be removed from it, but they will not be removed from the "
"disc."
"<br>\n"
"<b>NOTE:</b> This feature works only for local projects."
msgstr ""
#. i18n: file ./project/projectoptions.ui line 374
#: rc.cpp:3034
#, no-c-format
msgid "Debugger"
msgstr "除錯器"
#. i18n: file ./project/projectoptions.ui line 385
#: rc.cpp:3037
#, no-c-format
msgid "Debu&gger:"
msgstr "除錯器(&G)"
#. i18n: file ./project/projectoptions.ui line 420
#: rc.cpp:3040
#, no-c-format
msgid "Optio&ns"
msgstr "選項(&N)"
#. i18n: file ./project/projectoptions.ui line 428
#: rc.cpp:3043
#, no-c-format
msgid "Remember &breakpoints across sessions"
msgstr "在各個工作階段之間記下中斷點(&B)"
#. i18n: file ./project/projectoptions.ui line 436
#: rc.cpp:3046
#, no-c-format
msgid "Remember watches across sessions"
msgstr "在各個工作階段之間記下監視器"
#. i18n: file ./project/projectoptions.ui line 449
#: rc.cpp:3049
#, no-c-format
msgid "Use persistent boo&kmarks"
msgstr ""
#. i18n: file ./project/projectoptions.ui line 465
#: rc.cpp:3052
#, fuzzy, no-c-format
msgid "&Use preview prefix:"
msgstr "預覽字首"
#. i18n: file ./data/config/quantaui.rc line 13
#: rc.cpp:3058
#, no-c-format
msgid "Save as Template"
msgstr "另存為範本..."
#. i18n: file ./data/config/quantaui.rc line 38
#: rc.cpp:3064
#, no-c-format
msgid "Paste Special"
msgstr "特殊貼上"
#. i18n: file ./data/config/quantaui.rc line 60
#: rc.cpp:3070
#, no-c-format
msgid "E&xternal Preview"
msgstr "使用外部瀏覽器預覽(&X)"
#. i18n: file ./data/config/quantaui.rc line 75
#: rc.cpp:3073
#, no-c-format
msgid "&Project"
msgstr "專案(&P)"
#. i18n: file ./data/config/quantaui.rc line 94
#: rc.cpp:3076
#, no-c-format
msgid "Too&lbars"
msgstr "工具列(&L)"
#. i18n: file ./data/config/quantaui.rc line 96
#: rc.cpp:3079
#, no-c-format
msgid "&Load Toolbars"
msgstr "載入工具列(&L)"
#. i18n: file ./data/config/quantaui.rc line 102
#: rc.cpp:3082
#, no-c-format
msgid "&Save Toolbars"
msgstr "儲存工具列(&S)"
#. i18n: file ./data/config/quantaui.rc line 116
#: rc.cpp:3085
#, no-c-format
msgid "&DTD"
msgstr "&DTD"
#. i18n: file ./data/config/quantaui.rc line 128
#: rc.cpp:3088
#, no-c-format
msgid "&Tags"
msgstr "標籤(&T)"
#. i18n: file ./data/config/quantaui.rc line 135
#: rc.cpp:3091
#, no-c-format
msgid "Plu&gins"
msgstr "外掛程式(&G)"
#. i18n: file ./data/config/quantaui.rc line 139
#: rc.cpp:3094
#, no-c-format
msgid "T&ools"
msgstr "工具(&O)"
#. i18n: file ./data/config/quantaui.rc line 192
#: rc.cpp:3106
#, no-c-format
msgid "Editor Toolbar"
msgstr "編輯器的工具列"
#. i18n: file ./data/config/quantaui.rc line 200
#: rc.cpp:3109
#, no-c-format
msgid "Plugins Toolbar"
msgstr "外掛程式的工具列"
#. i18n: file ./data/config/quantaui.rc line 207
#: rc.cpp:3112
#, no-c-format
msgid "Navigation Toolbar"
msgstr "瀏覽器的工具列"
#. i18n: file ./data/config/quantaui.rc line 230
#: rc.cpp:3115
#, no-c-format
msgid "&Debug"
msgstr "除錯(&D)"
#. i18n: file ./data/config/quantaui.rc line 232
#: rc.cpp:3118
#, no-c-format
msgid "Session"
msgstr "工作階段"
#. i18n: file ./data/config/quantaui.rc line 237
#: rc.cpp:3121
#, no-c-format
msgid "&Execution"
msgstr "執行(&E)"
#. i18n: file ./data/config/quantaui.rc line 252
#: rc.cpp:3124
#, no-c-format
msgid "&Breakpoints"
msgstr "中斷點(&B)"
#. i18n: file ./data/config/quantaui.rc line 258
#: rc.cpp:3127
#, no-c-format
msgid "&Variables"
msgstr "變數(&V)"
#. i18n: file ./data/config/quantaui.rc line 263
#: rc.cpp:3130
#, no-c-format
msgid "&Profiler"
msgstr "&Profiler"
#. i18n: file ./data/config/quantaui.rc line 268
#: rc.cpp:3133
#, no-c-format
msgid "Debugger Toolbar"
msgstr "除錯器工具列"
#. i18n: file ./data/config/quantaui.rc line 287
#: rc.cpp:3136
#, no-c-format
msgid "Project Toolbar"
msgstr "專案工具列"
#. i18n: file ./scripts/scriptinfo.kmdr line 16
#: rc.cpp:3139
#, no-c-format
msgid "Quanta Script Info Generator"
msgstr "Quanta 指令稿資訊生成器"
#. i18n: file ./scripts/scriptinfo.kmdr line 37
#: rc.cpp:3142
#, no-c-format
msgid "Enter Info"
msgstr "輸入資訊"
#. i18n: file ./scripts/scriptinfo.kmdr line 61
#: rc.cpp:3145
#, no-c-format
msgid "Please fill in all fields"
msgstr "請填上所有欄位"
#. i18n: file ./scripts/scriptinfo.kmdr line 69
#: rc.cpp:3148
#, no-c-format
msgid "Script name:"
msgstr "指令稿名稱:"
#. i18n: file ./scripts/scriptinfo.kmdr line 90
#: rc.cpp:3151
#, no-c-format
msgid "Enter the script name with the extension"
msgstr "請一併填上指令稿名稱的副檔名"
#. i18n: file ./scripts/scriptinfo.kmdr line 98
#: rc.cpp:3154
#, no-c-format
msgid "About script:"
msgstr "關於指令稿:"
#. i18n: file ./scripts/scriptinfo.kmdr line 111
#: rc.cpp:3157
#, no-c-format
msgid "Formatting may be done with XHTML tags"
msgstr ""
#. i18n: file ./scripts/scriptinfo.kmdr line 119
#: rc.cpp:3160
#, no-c-format
msgid "http://"
msgstr "http://"
#. i18n: file ./scripts/scriptinfo.kmdr line 127
#: rc.cpp:3163
#, no-c-format
msgid "The location of your up-to-date file on the web"
msgstr "您在網上最新檔案的位置"
#. i18n: file ./scripts/scriptinfo.kmdr line 135
#: rc.cpp:3166
#, no-c-format
msgid "Script author:"
msgstr "指令稿作者:"
#. i18n: file ./scripts/scriptinfo.kmdr line 143
#: rc.cpp:3169
#, no-c-format
msgid "Script license:"
msgstr "指令稿許可證:"
#. i18n: file ./scripts/scriptinfo.kmdr line 159
#: rc.cpp:3172
#, no-c-format
msgid "Select the directory to write the .info file to"
msgstr "請選擇要把 .info 檔案存放的目錄"
#. i18n: file ./scripts/scriptinfo.kmdr line 165
#: rc.cpp:3175
#, no-c-format
msgid "GPL-2"
msgstr "GPL-2"
#. i18n: file ./scripts/scriptinfo.kmdr line 170
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:83 rc.cpp:3178
#, no-c-format
msgid "LGPL"
msgstr "LGPL"
#. i18n: file ./scripts/scriptinfo.kmdr line 175
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:84 rc.cpp:3181
#, no-c-format
msgid "BSD"
msgstr "BSD"
#. i18n: file ./scripts/scriptinfo.kmdr line 180
#: rc.cpp:3184
#, no-c-format
msgid "Public Domain"
msgstr "Public Domain"
#. i18n: file ./scripts/scriptinfo.kmdr line 185
#: rc.cpp:3187 rc.cpp:4838
#, no-c-format
msgid "Other"
msgstr "其他"
#. i18n: file ./scripts/scriptinfo.kmdr line 200
#: rc.cpp:3190
#, no-c-format
msgid "If other include in about"
msgstr ""
#. i18n: file ./scripts/scriptinfo.kmdr line 208
#: rc.cpp:3193
#, no-c-format
msgid "Editor/Executor:"
msgstr "編輯器/執行工具:"
#. i18n: file ./scripts/scriptinfo.kmdr line 216
#: rc.cpp:3196
#, no-c-format
msgid "Author email:"
msgstr "作者 Email"
#. i18n: file ./scripts/scriptinfo.kmdr line 224
#: rc.cpp:3199
#, no-c-format
msgid "Web address:"
msgstr "網頁地址:"
#. i18n: file ./scripts/scriptinfo.kmdr line 232
#: rc.cpp:3202
#, no-c-format
msgid "Version number:"
msgstr "版本號:"
#. i18n: file ./scripts/scriptinfo.kmdr line 273
#: rc.cpp:3205
#, no-c-format
msgid "kmdr-editor"
msgstr "kmdr-editor"
#. i18n: file ./scripts/scriptinfo.kmdr line 278
#: rc.cpp:3208
#, no-c-format
msgid "kwrite"
msgstr "kwrite"
#. i18n: file ./scripts/scriptinfo.kmdr line 283
#: rc.cpp:3211
#, no-c-format
msgid "kate"
msgstr "kate"
#. i18n: file ./scripts/scriptinfo.kmdr line 288
#: rc.cpp:3214
#, no-c-format
msgid "tdevelop"
msgstr "tdevelop"
#. i18n: file ./scripts/scriptinfo.kmdr line 303
#: rc.cpp:3217
#, no-c-format
msgid "Optional: Editor other than Quanta to use for this script"
msgstr "選擇性:這個指令稿除了 Quanta 之外所使用的編輯器"
#. i18n: file ./scripts/scriptinfo.kmdr line 314
#: rc.cpp:3220
#, no-c-format
msgid "kmdr-executor -c quanta"
msgstr "kmdr-executor -c quanta"
#. i18n: file ./scripts/scriptinfo.kmdr line 319
#: rc.cpp:3223
#, no-c-format
msgid "kmdr-executor"
msgstr "kmdr-executor"
#. i18n: file ./scripts/scriptinfo.kmdr line 324
#: rc.cpp:3226
#, no-c-format
msgid "perl"
msgstr "perl"
#. i18n: file ./scripts/scriptinfo.kmdr line 329
#: rc.cpp:3229
#, no-c-format
msgid "php"
msgstr "php"
#. i18n: file ./scripts/scriptinfo.kmdr line 344
#: rc.cpp:3232
#, no-c-format
msgid "Optional: External program executor"
msgstr "選擇性: 外部程式執行工具"
#. i18n: file ./scripts/scriptinfo.kmdr line 352
#: rc.cpp:3235 rc.cpp:3749
#, no-c-format
msgid "Script location:"
msgstr "指令稿位置:"
#. i18n: file ./scripts/scriptinfo.kmdr line 360
#: rc.cpp:3238
#, no-c-format
msgid "Write File"
msgstr "寫入檔案"
#. i18n: file ./scripts/scriptinfo.kmdr line 431
#: rc.cpp:3244
#, no-c-format
msgid ""
"<html><head><meta name=\"qrichtext\" content=\"1\" /></head>"
"<body style=\"font-size:11pt;font-family:sans-serif\">\n"
"<p style=\"margin-top:16px\"><span style=\"font-weight:600\">"
"Quanta Plus Submitter Info Files</span></p>\n"
"<p>The purpose of these files is to provide developers with proper credit, "
"expose licensing information and give users thumbnail information about scripts "
"and templates at a glance. We ask that you try to do several things here.</p>\n"
"<ul type=\"disc\">"
"<li>Fill in all the fields. They are all there for a reason.</li>\n"
"<li>Contact the appropriate Quanta script and template maintainer or a member "
"of our team when you have new releases so we can include them. As we plan to "
"build a huge repository we have to rely on you here.</li></ul>\n"
"<p>The additional information serves as a backup. Any time a user wants they "
"can click the link to go to your site and get updates, docs or whatever they "
"require. Thank you for helping us to make this a great feature</p>\n"
"<p align=\"center\" style=\"margin-top:14px\"><span style=\"font-weight:600\">"
"Contact Information</span></p>\n"
"<p align=\"center\">Quanta Resource Maintainer - (none at this time)<br />"
"Lead Developer - Andras Mantia <a "
"href=\"mailto:amantia@kde.org?subject=ScriptInfo\">amantia@kde.org</a><br />"
"Kommander - Michal Rudolf <a "
"href=\"mailto:mrudolf@tdewebdev.org?subject=ScriptInfo\">"
"mrudolf@tdewebdev.org</a><br />Project Lead - Eric Laffoon <a "
"href=\"mailto:sequitur@kde.org?subject=ScriptInfo\">sequitur@kde.org</a></p>\n"
"</body></html>\n"
msgstr ""
#. i18n: file ./scripts/tidy.kmdr line 16
#: rc.cpp:3256
#, no-c-format
msgid "Tidy by Kommander"
msgstr "Tidy by Kommander"
#. i18n: file ./scripts/tidy.kmdr line 37
#: rc.cpp:3259
#, no-c-format
msgid "General Options"
msgstr "一般選項"
#. i18n: file ./scripts/tidy.kmdr line 54
#: rc.cpp:3262
#, no-c-format
msgid "Non Tidy Option"
msgstr "非 Tidy 選項"
#. i18n: file ./scripts/tidy.kmdr line 78
#: rc.cpp:3265
#, no-c-format
msgid ""
"Note: This will not work well if you have multiple\n"
"instances of Quanta running."
msgstr "注意:如果您正在運行多個 Quanta 實體,這不會正常工作。"
#. i18n: file ./scripts/tidy.kmdr line 86
#: rc.cpp:3269
#, no-c-format
msgid "Use DCOP to send active page from Quanta+ to tidy"
msgstr "使用 DCOP 主動把頁面從 Quanta+ 傳送至 Tidy"
#. i18n: file ./scripts/tidy.kmdr line 116
#: rc.cpp:3272
#, no-c-format
msgid "Path to tidy (required):"
msgstr "Tidy 所在的路徑(必需):"
#. i18n: file ./scripts/tidy.kmdr line 137
#: rc.cpp:3275
#, no-c-format
msgid "Input from file instead of stdin:"
msgstr "輸入從檔案(而非 stdin)"
#. i18n: file ./scripts/tidy.kmdr line 152
#: rc.cpp:3278
#, no-c-format
msgid "Write errors to file instead of stderr:"
msgstr "輸出錯誤至檔案(而非 stderr)"
#. i18n: file ./scripts/tidy.kmdr line 167
#: rc.cpp:3281
#, no-c-format
msgid "Use configuration from file:"
msgstr "使用設定檔:"
#. i18n: file ./scripts/tidy.kmdr line 182
#: rc.cpp:3284
#, no-c-format
msgid "Output to file instead of stdout:"
msgstr "輸出至檔案(而非 stdout)"
#. i18n: file ./scripts/tidy.kmdr line 226
#: rc.cpp:3287
#, no-c-format
msgid "Modify original input files"
msgstr "修改原始輸入檔案"
#. i18n: file ./scripts/tidy.kmdr line 251
#: rc.cpp:3290
#, no-c-format
msgid "/usr/bin"
msgstr "/usr/bin"
#. i18n: file ./scripts/tidy.kmdr line 266
#: rc.cpp:3293
#, no-c-format
msgid "Processing Directives"
msgstr "正在處理指示詞(Directives)"
#. i18n: file ./scripts/tidy.kmdr line 297
#: rc.cpp:3296
#, no-c-format
msgid "Force XHTML to well-formed HTML"
msgstr "強制轉換 XHTML 成 well-formed HTML"
#. i18n: file ./scripts/tidy.kmdr line 312
#: rc.cpp:3299
#, no-c-format
msgid "Convert HTML to well-formed XHTML"
msgstr "把 HTML 轉換成 well-formed XHTML"
#. i18n: file ./scripts/tidy.kmdr line 327
#: rc.cpp:3302
#, no-c-format
msgid "Replace FONT, NOBR and CENTER tags by CSS"
msgstr "把 FONT, NOBR 及 CENTER 標籤以相應的 CSS 取代"
#. i18n: file ./scripts/tidy.kmdr line 342
#: rc.cpp:3305
#, no-c-format
msgid "Force tags to upper case"
msgstr "標籤強制使用大寫"
#. i18n: file ./scripts/tidy.kmdr line 357
#: rc.cpp:3308
#, no-c-format
msgid "Specify the input is well-formed XML"
msgstr "指定輸入的是 well-formed XML"
#. i18n: file ./scripts/tidy.kmdr line 372
#: rc.cpp:3311
#, no-c-format
msgid "Omit optional end tags"
msgstr "忽略選擇性的結束標籤"
#. i18n: file ./scripts/tidy.kmdr line 387
#: rc.cpp:3314
#, no-c-format
msgid "Do extra accessibility checks <level>:"
msgstr ""
#. i18n: file ./scripts/tidy.kmdr line 411
#: rc.cpp:3317
#, no-c-format
msgid "Output numeric rather than named entities"
msgstr ""
#. i18n: file ./scripts/tidy.kmdr line 426
#: rc.cpp:3320
#, no-c-format
msgid "Only show errors"
msgstr "只顯示錯誤"
#. i18n: file ./scripts/tidy.kmdr line 451
#: rc.cpp:3323
#, no-c-format
msgid "Wrap text at column:"
msgstr ""
#. i18n: file ./scripts/tidy.kmdr line 459
#: rc.cpp:3326
#, no-c-format
msgid "Convert HTML to well-formed XML"
msgstr "把 HTML 轉換成 well-formed XML"
#. i18n: file ./scripts/tidy.kmdr line 474
#: rc.cpp:3329
#, no-c-format
msgid "Indent element content"
msgstr "對元素內容作縮排"
#. i18n: file ./scripts/tidy.kmdr line 489
#: rc.cpp:3332
#, no-c-format
msgid "Strip out smart quotes and em dashes, etc."
msgstr ""
#. i18n: file ./scripts/tidy.kmdr line 504
#: rc.cpp:3335
#, no-c-format
msgid "Suppress nonessential output"
msgstr ""
#. i18n: file ./scripts/tidy.kmdr line 523
#: rc.cpp:3338
#, no-c-format
msgid "Character Encodings"
msgstr "字元編碼"
#. i18n: file ./scripts/tidy.kmdr line 557
#: rc.cpp:3341
#, no-c-format
msgid "(ibm858) use IBM-858 (CP850+Euro) for input, US-ASCII for output"
msgstr "(ibm858) 使用 IBM-858 (CP850+Euro) 作輸入, US-ASCII 作輸出"
#. i18n: file ./scripts/tidy.kmdr line 571
#: rc.cpp:3344
#, no-c-format
msgid "(raw) output values above 127 without conversion to entities"
msgstr ""
#. i18n: file ./scripts/tidy.kmdr line 588
#: rc.cpp:3347
#, no-c-format
msgid "(utf16le) use UTF-16LE for both input and output"
msgstr "(utf16le) 使用 UTF-16LE 作輸入及輸出"
#. i18n: file ./scripts/tidy.kmdr line 602
#: rc.cpp:3350
#, no-c-format
msgid "(latin1) use ISO-8859-1 for both input and output"
msgstr "(latin1) 使用 ISO-8859-1 作輸入及輸出"
#. i18n: file ./scripts/tidy.kmdr line 616
#: rc.cpp:3353
#, no-c-format
msgid "(win1252) use Windows-1252 for input, US-ASCII for output"
msgstr "(win1252) 使用 Windows-1252 作輸入, US-ASCII 作輸出"
#. i18n: file ./scripts/tidy.kmdr line 638
#: rc.cpp:3356
#, no-c-format
msgid "(shiftjis) use Shift_JIS for both input and output"
msgstr "(shiftjis) 使用 Shift_JIS 作輸入及輸出"
#. i18n: file ./scripts/tidy.kmdr line 652
#: rc.cpp:3359
#, no-c-format
msgid "(utf16be) use UTF-16BE for both input and output"
msgstr "(utf16be) 使用 UTF-16BE 作輸入及輸出"
#. i18n: file ./scripts/tidy.kmdr line 666
#: rc.cpp:3362
#, no-c-format
msgid "(ascii) use US-ASCII for output, ISO-8859-1 for input"
msgstr "(ascii) 使用 ISO-8859-1 作輸入, US-ASCII 作輸出"
#. i18n: file ./scripts/tidy.kmdr line 680
#: rc.cpp:3365
#, no-c-format
msgid "set the two-letter language code <lang> (for future use)"
msgstr "設定二字元語言代碼<lang> (將來使用)"
#. i18n: file ./scripts/tidy.kmdr line 694
#: rc.cpp:3368
#, no-c-format
msgid "(utf16) use UTF-16 for both input and output"
msgstr "(utf16) 使用 UTF-16 作輸入及輸出"
#. i18n: file ./scripts/tidy.kmdr line 708
#: rc.cpp:3371
#, no-c-format
msgid "(big5) use Big5 for both input and output"
msgstr "(big5) 使用 Big5 作輸入及輸出"
#. i18n: file ./scripts/tidy.kmdr line 722
#: rc.cpp:3374
#, no-c-format
msgid "(utf8) use UTF-8 for both input and output"
msgstr "(utf8) 使用 UTF-8 作輸入及輸出"
#. i18n: file ./scripts/tidy.kmdr line 736
#: rc.cpp:3377
#, no-c-format
msgid "(latin0) use US-ASCII for output, ISO-8859-1 for input"
msgstr "(latin0) 使用 ISO-8859-1 作輸入, US-ASCII 作輸出"
#. i18n: file ./scripts/tidy.kmdr line 750
#: rc.cpp:3380
#, no-c-format
msgid "(mac) use MacRoman for input, US-ASCII for output"
msgstr "(mac) 使用 MacRoman 作輸入, US-ASCII 作輸出"
#. i18n: file ./scripts/tidy.kmdr line 764
#: rc.cpp:3383
#, no-c-format
msgid "(iso2022) use ISO-2022 for both input and output"
msgstr "(iso2022) 使用 ISO-2022 作輸入及輸出"
#. i18n: file ./scripts/tidy.kmdr line 778
#: rc.cpp:3386
#, no-c-format
msgid "Do not specify an encoding"
msgstr "不要指定編碼"
#. i18n: file ./scripts/tidy.kmdr line 799
#: rc.cpp:3389
#, no-c-format
msgid "About Tidy"
msgstr "關於 Tidy"
#. i18n: file ./scripts/tidy.kmdr line 924
#: rc.cpp:3392
#, no-c-format
msgid ""
"HTML Tidy Configuration Settings\n"
"\n"
"Within a file, use the form:\n"
"\n"
"wrap: 72\n"
"split: no\n"
"\n"
"When specified on the command line, use the form:\n"
"\n"
"--wrap 72 --split no\n"
"\n"
"Name\t\t\t\tType \tAllowable values\n"
"==================== \t========= \t==============================\n"
"indent-spaces\t\t\tInteger \t0, 1, 2, ...\n"
"wrap\t\t\t\tInteger \t0 (no wrapping), 1, 2, ...\n"
"tab-size\t\t\t\tInteger \t0, 1, 2, ...\n"
"char-encoding\t\t\tEncoding\t ascii, latin0, latin1, raw, utf8, iso202\n"
"\t\t\t\t\t\tutf16le, utf16be, utf16,\n"
"\t\t\t\t\t\tmac, win1252, ibm858, big5, shiftjis\n"
"input-encoding\t\t\tEncoding \tascii, latin0, latin1, raw, utf8, iso202\n"
"\t\t\t\t\t\tutf16le, utf16be, utf16,\n"
"\t\t\t\t\t\tmac, win1252, ibm858, big5, shiftjis\n"
"output-encoding\t\t\tEncoding\tascii, latin0, latin1, raw, utf8, iso202\n"
"\t\t\t\t\t\tutf16le, utf16be, utf16,\n"
"\t\t\t\t\t\tmac, win1252, ibm858, big5, shiftjis\n"
"newline\t\t\t\tenum\t\tLF, CRLF, CR\n"
"doctype\t\t\t\tDocType\tauto, omit, strict, loose, transitional,\n"
"\t\t\t\t\t\tuser specified fpi (string)\n"
"repeated-attributes\t\tenum\t\tkeep-first, keep-last\n"
"alt-text\t\t\t\tString\t\t-\n"
"slide-style\t\t\tString\t\t-\n"
"error-file\t\t\t\tString\t\t-\n"
"output-file\t\t\tString\t\t-\n"
"write-back\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"markup\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"show-warnings\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"quiet\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"indent\t\t\t\tAutoBool \tauto, y/n, yes/no, t/f, true/false, 1/0\n"
"hide-endtags\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"input-xml\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"output-xml\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"output-xhtml\t\t\tBoolean \t y/n, yes/no, t/f, true/false, 1/0\n"
"output-html\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"add-xml-decl\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"uppercase-tags\t\t\tBoolean \t y/n, yes/no, t/f, true/false, 1/0\n"
"uppercase-attributes\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"bare\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"clean\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"logical-emphasis\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"drop-proprietary-attributes\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"drop-font-tags\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"drop-empty-paras\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"fix-bad-comments\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"break-before-br\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"split\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"numeric-entities\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"quote-marks\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"quote-nbsp\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"quote-ampersand\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"wrap-attributes\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"wrap-script-literals\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"wrap-sections\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"wrap-asp\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"wrap-jste\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"wrap-php\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"fix-backslash\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"indent-attributes\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"assume-xml-procins\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"add-xml-space\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"enclose-text\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"enclose-block-text\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"keep-time\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"word-2000\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"tidy-mark\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"gnu-emacs\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"gnu-emacs-file\t\t\tString \t-\n"
"literal-attributes\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"show-body-only\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"fix-uri\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"lower-literals\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"hide-comments\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"indent-cdata\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"force-output\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"show-errors\t\t\tInteger \t0, 1, 2, ...\n"
"ascii-chars\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"join-classes\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"join-styles\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"escape-cdata\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"language\t\t\tString \t-\n"
"ncr\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"output-bom\t\t\tAutoBool \tauto, y/n, yes/no, t/f, true/false, 1/0\n"
"replace-color\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"css-prefix\t\t\tName \tCSS1 selector\n"
"new-inline-tags\t\t\tTag names \ttagX, tagY, ...\n"
"new-blocklevel-tags\t\tTag names \ttagX, tagY, ...\n"
"new-empty-tags\t\t\tTag names \ttagX, tagY, ...\n"
"new-pre-tags\t\t\tTag names\ttagX, tagY, ...\n"
"accessibility-check\t\tInteger \t0, 1, 2, ...\n"
msgstr ""
"HTML Tidy 設定\n"
"Within a file, use the form:\n"
"\n"
"wrap: 72\n"
"split: no\n"
"\n"
"When specified on the command line, use the form:\n"
"\n"
"--wrap 72 --split no\n"
"\n"
"名稱\t\t\t\t類型 \t允許的數值\n"
"==================== \t========= \t==============================\n"
"indent-spaces\t\t\tInteger \t0, 1, 2, ...\n"
"wrap\t\t\t\tInteger \t0 (no wrapping), 1, 2, ...\n"
"tab-size\t\t\t\tInteger \t0, 1, 2, ...\n"
"char-encoding\t\t\tEncoding\t ascii, latin0, latin1, raw, utf8, iso202\n"
"\t\t\t\t\t\tutf16le, utf16be, utf16,\n"
"\t\t\t\t\t\tmac, win1252, ibm858, big5, shiftjis\n"
"input-encoding\t\t\tEncoding \tascii, latin0, latin1, raw, utf8, iso202\n"
"\t\t\t\t\t\tutf16le, utf16be, utf16,\n"
"\t\t\t\t\t\tmac, win1252, ibm858, big5, shiftjis\n"
"output-encoding\t\t\tEncoding\tascii, latin0, latin1, raw, utf8, iso202\n"
"\t\t\t\t\t\tutf16le, utf16be, utf16,\n"
"\t\t\t\t\t\tmac, win1252, ibm858, big5, shiftjis\n"
"newline\t\t\t\tenum\t\tLF, CRLF, CR\n"
"doctype\t\t\t\tDocType\tauto, omit, strict, loose, transitional,\n"
"\t\t\t\t\t\tuser specified fpi (string)\n"
"repeated-attributes\t\tenum\t\tkeep-first, keep-last\n"
"alt-text\t\t\t\tString\t\t-\n"
"slide-style\t\t\tString\t\t-\n"
"error-file\t\t\t\tString\t\t-\n"
"output-file\t\t\tString\t\t-\n"
"write-back\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"markup\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"show-warnings\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"quiet\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"indent\t\t\t\tAutoBool \tauto, y/n, yes/no, t/f, true/false, 1/0\n"
"hide-endtags\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"input-xml\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"output-xml\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"output-xhtml\t\t\tBoolean \t y/n, yes/no, t/f, true/false, 1/0\n"
"output-html\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"add-xml-decl\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"uppercase-tags\t\t\tBoolean \t y/n, yes/no, t/f, true/false, 1/0\n"
"uppercase-attributes\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"bare\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"clean\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"logical-emphasis\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"drop-proprietary-attributes\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"drop-font-tags\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"drop-empty-paras\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"fix-bad-comments\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"break-before-br\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"split\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"numeric-entities\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"quote-marks\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"quote-nbsp\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"quote-ampersand\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"wrap-attributes\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"wrap-script-literals\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"wrap-sections\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"wrap-asp\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"wrap-jste\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"wrap-php\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"fix-backslash\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"indent-attributes\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"assume-xml-procins\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"add-xml-space\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"enclose-text\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"enclose-block-text\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"keep-time\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"word-2000\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"tidy-mark\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"gnu-emacs\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"gnu-emacs-file\t\t\tString \t-\n"
"literal-attributes\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"show-body-only\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"fix-uri\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"lower-literals\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"hide-comments\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"indent-cdata\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"force-output\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"show-errors\t\t\tInteger \t0, 1, 2, ...\n"
"ascii-chars\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"join-classes\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"join-styles\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"escape-cdata\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"language\t\t\tString \t-\n"
"ncr\t\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"output-bom\t\t\tAutoBool \tauto, y/n, yes/no, t/f, true/false, 1/0\n"
"replace-color\t\t\tBoolean \ty/n, yes/no, t/f, true/false, 1/0\n"
"css-prefix\t\t\tName \tCSS1 selector\n"
"new-inline-tags\t\t\tTag names \ttagX, tagY, ...\n"
"new-blocklevel-tags\t\tTag names \ttagX, tagY, ...\n"
"new-empty-tags\t\t\tTag names \ttagX, tagY, ...\n"
"new-pre-tags\t\t\tTag names\ttagX, tagY, ...\n"
"accessibility-check\t\tInteger \t0, 1, 2, ...\n"
#. i18n: file ./scripts/tidy.kmdr line 938
#: rc.cpp:3493 rc.cpp:3924
#, no-c-format
msgid "&Process"
msgstr "處理(&P)"
#. i18n: file ./scripts/xsltproc.kmdr line 18
#: rc.cpp:3499
#, no-c-format
msgid "Quanta+: xsltproc"
msgstr "Quanta+: xsltproc"
#. i18n: file ./scripts/xsltproc.kmdr line 66
#: rc.cpp:3502
#, no-c-format
msgid "&Translate"
msgstr "轉譯(&T)"
#. i18n: file ./scripts/xsltproc.kmdr line 143
#: rc.cpp:3508
#, no-c-format
msgid "Current file"
msgstr "目前的檔案"
#. i18n: file ./scripts/xsltproc.kmdr line 184
#: rc.cpp:3511
#, no-c-format
msgid "File location:"
msgstr "檔案位置:"
#. i18n: file ./scripts/xsltproc.kmdr line 221
#: rc.cpp:3514
#, no-c-format
msgid "Stylesheet location:"
msgstr "樣式表位置:"
#. i18n: file ./scripts/xsltproc.kmdr line 255
#: rc.cpp:3517
#, no-c-format
msgid "Output file name:"
msgstr "輸出檔案名稱:"
#. i18n: file ./scripts/picturewizard.kmdr line 18
#: rc.cpp:3520
#, no-c-format
msgid "Docbook Image Wizard"
msgstr "Docbook 圖片精靈"
#. i18n: file ./scripts/picturewizard.kmdr line 87
#: rc.cpp:3526
#, no-c-format
msgid ""
"Press this button to cancel the creation of the image markup. No action will be "
"performed."
msgstr "按下來取消圖片標記的建立。動作會被取消。"
#. i18n: file ./scripts/picturewizard.kmdr line 103
#: rc.cpp:3529
#, no-c-format
msgid "O&K"
msgstr "確定(&K)"
#. i18n: file ./scripts/picturewizard.kmdr line 123
#: rc.cpp:3532
#, no-c-format
msgid "Press this button to create the image markup."
msgstr ""
#. i18n: file ./scripts/picturewizard.kmdr line 144
#: rc.cpp:3535
#, no-c-format
msgid ""
"<qt>\n"
"Select the type of markup appropriated to wrap your image:\n"
"<ul>\n"
"<li><b>screenshot:</b> used for screenshot images.</li>\n"
"<li><b>mediaobject:</b> used for all kinds of images which are not presented "
"inside the flow of text or table entry.</li>\n"
"<li><b>inlinemediaobject:</b> used for images which are presented in the middle "
"of flow of text, or in a table entry. Use mediaobject for all other images.</li>"
"\n"
"</ul>\n"
"</qt>"
msgstr ""
#. i18n: file ./scripts/picturewizard.kmdr line 155
#: rc.cpp:3545
#, no-c-format
msgid "Wrapper Type"
msgstr ""
#. i18n: file ./scripts/picturewizard.kmdr line 175
#: rc.cpp:3548
#, no-c-format
msgid "&screenshot"
msgstr "抓圖(&S)"
#. i18n: file ./scripts/picturewizard.kmdr line 201
#: rc.cpp:3551
#, no-c-format
msgid ""
"Select this option to create the necessary markup for a screenshot. The "
"screenshot markup contains the mediaoption markup. Use for screenshots only. "
"Other figures and images should use inlinemediaobject if inside text, or "
"mediaobject to separate the image from the text."
msgstr ""
#. i18n: file ./scripts/picturewizard.kmdr line 209
#: rc.cpp:3554
#, fuzzy, no-c-format
msgid "&mediaobject"
msgstr "專案(&P)"
#. i18n: file ./scripts/picturewizard.kmdr line 226
#: rc.cpp:3557
#, no-c-format
msgid ""
"Select this option to create the necessary markup for a image outside the "
"normal flow of text. Check the \"Create caption, using the image description "
"text.\" box, to add text description for the image."
msgstr ""
#. i18n: file ./scripts/picturewizard.kmdr line 240
#: rc.cpp:3560
#, no-c-format
msgid "i&nlinemediaobject"
msgstr ""
#. i18n: file ./scripts/picturewizard.kmdr line 259
#: rc.cpp:3563
#, no-c-format
msgid ""
"Select this option to create the necessary markup for a image inside the normal "
"flow of text. You should use this option for images inside a table entry (entry "
"tag) or a paragraph (para tag). This option is specially suited for small "
"images, such as icons."
msgstr ""
#. i18n: file ./scripts/picturewizard.kmdr line 269
#: rc.cpp:3566
#, no-c-format
msgid "Image Options"
msgstr "圖片選項"
#. i18n: file ./scripts/picturewizard.kmdr line 306
#: rc.cpp:3569
#, no-c-format
msgid "BMP"
msgstr "BMP"
#. i18n: file ./scripts/picturewizard.kmdr line 311
#: rc.cpp:3572
#, no-c-format
msgid "CGM-BINARY"
msgstr "CGM-BINARY"
#. i18n: file ./scripts/picturewizard.kmdr line 316
#: rc.cpp:3575
#, no-c-format
msgid "CGM-CHAR"
msgstr "CGM-CHAR"
#. i18n: file ./scripts/picturewizard.kmdr line 321
#: rc.cpp:3578
#, no-c-format
msgid "CGM-CLEAR"
msgstr "CGM-CLEAR"
#. i18n: file ./scripts/picturewizard.kmdr line 326
#: rc.cpp:3581
#, no-c-format
msgid "DITROFF"
msgstr "DITROFF"
#. i18n: file ./scripts/picturewizard.kmdr line 331
#: rc.cpp:3584
#, no-c-format
msgid "DVI"
msgstr "DVI"
#. i18n: file ./scripts/picturewizard.kmdr line 336
#: rc.cpp:3587
#, no-c-format
msgid "EPS"
msgstr "EPS"
#. i18n: file ./scripts/picturewizard.kmdr line 341
#: rc.cpp:3590
#, no-c-format
msgid "EQN"
msgstr "EQN"
#. i18n: file ./scripts/picturewizard.kmdr line 346
#: rc.cpp:3593
#, no-c-format
msgid "FAX"
msgstr "FAX"
#. i18n: file ./scripts/picturewizard.kmdr line 351
#: rc.cpp:3596
#, no-c-format
msgid "GIF"
msgstr "GIF"
#. i18n: file ./scripts/picturewizard.kmdr line 356
#: rc.cpp:3599
#, no-c-format
msgid "GIF87a"
msgstr "GIF87a"
#. i18n: file ./scripts/picturewizard.kmdr line 361
#: rc.cpp:3602
#, no-c-format
msgid "GIF89a"
msgstr "GIF89a"
#. i18n: file ./scripts/picturewizard.kmdr line 366
#: rc.cpp:3605
#, no-c-format
msgid "IGES"
msgstr "IGES"
#. i18n: file ./scripts/picturewizard.kmdr line 371
#: rc.cpp:3608
#, no-c-format
msgid "JPEG"
msgstr "JPEG"
#. i18n: file ./scripts/picturewizard.kmdr line 376
#: rc.cpp:3611
#, no-c-format
msgid "JPG"
msgstr "JPG"
#. i18n: file ./scripts/picturewizard.kmdr line 381
#: rc.cpp:3614
#, no-c-format
msgid "linespecific"
msgstr "linespecific"
#. i18n: file ./scripts/picturewizard.kmdr line 386
#: rc.cpp:3617
#, no-c-format
msgid "PCX"
msgstr "PCX"
#. i18n: file ./scripts/picturewizard.kmdr line 391
#: rc.cpp:3620
#, no-c-format
msgid "PDF"
msgstr "PDF"
#. i18n: file ./scripts/picturewizard.kmdr line 396
#: rc.cpp:3623
#, no-c-format
msgid "PIC"
msgstr "PIC"
#. i18n: file ./scripts/picturewizard.kmdr line 401
#: rc.cpp:3626
#, no-c-format
msgid "PNG"
msgstr "PNG"
#. i18n: file ./scripts/picturewizard.kmdr line 406
#: rc.cpp:3629
#, no-c-format
msgid "PS"
msgstr "PS"
#. i18n: file ./scripts/picturewizard.kmdr line 411
#: rc.cpp:3632
#, no-c-format
msgid "SGML"
msgstr "SGML"
#. i18n: file ./scripts/picturewizard.kmdr line 416
#: rc.cpp:3635
#, no-c-format
msgid "SVG"
msgstr "SVG"
#. i18n: file ./scripts/picturewizard.kmdr line 421
#: rc.cpp:3638
#, no-c-format
msgid "SWF"
msgstr "SWF"
#. i18n: file ./scripts/picturewizard.kmdr line 426
#: rc.cpp:3641
#, no-c-format
msgid "TBL"
msgstr "TBL"
#. i18n: file ./scripts/picturewizard.kmdr line 431
#: rc.cpp:3644
#, no-c-format
msgid "TEX"
msgstr "TEX"
#. i18n: file ./scripts/picturewizard.kmdr line 436
#: rc.cpp:3647
#, no-c-format
msgid "TIFF"
msgstr "TIFF"
#. i18n: file ./scripts/picturewizard.kmdr line 441
#: rc.cpp:3650
#, no-c-format
msgid "WMF"
msgstr "WMF"
#. i18n: file ./scripts/picturewizard.kmdr line 446
#: rc.cpp:3653
#, no-c-format
msgid "WPG"
msgstr "WPG"
#. i18n: file ./scripts/picturewizard.kmdr line 461
#: rc.cpp:3656 rc.cpp:3674
#, no-c-format
msgid ""
"Select the image format here. The image format is usually reflects the file "
"extension of your image file (.png corresponds to PNG in the drop down, .jpg "
"corresponds to JPG, etc.)."
msgstr "請在這裏選擇圖片格式。圖片的格式一般與副檔名有關。(.png 對應 PNG , .jpg 對應 JPG......)"
#. i18n: file ./scripts/picturewizard.kmdr line 469
#: rc.cpp:3659
#, no-c-format
msgid "Create caption, &using the image description text."
msgstr "以圖片描述文字建立標題(&U)."
#. i18n: file ./scripts/picturewizard.kmdr line 482
#: rc.cpp:3662
#, no-c-format
msgid ""
"Check this box add caption text to the image. The caption text will appear "
"below the image, allowing you to introduce or explain the image."
msgstr ""
#. i18n: file ./scripts/picturewizard.kmdr line 490
#: rc.cpp:3665
#, no-c-format
msgid "Image description."
msgstr "圖片描述."
#. i18n: file ./scripts/picturewizard.kmdr line 498
#: rc.cpp:3668 rc.cpp:3692
#, no-c-format
msgid ""
"Enter the description of the image here. For instance, a screenshot of a "
"configuration dialog should be described as \"Configuration dialog.\". This "
"text will be used as caption text if the box below is checked."
msgstr ""
#. i18n: file ./scripts/picturewizard.kmdr line 506
#: rc.cpp:3671
#, no-c-format
msgid "Image Type:"
msgstr "圖片類型:"
#. i18n: file ./scripts/picturewizard.kmdr line 517
#: rc.cpp:3677
#, no-c-format
msgid "Image file name:"
msgstr "圖片檔案名稱:"
#. i18n: file ./scripts/picturewizard.kmdr line 520
#: rc.cpp:3680 rc.cpp:3686
#, no-c-format
msgid ""
"Enter the file name of the image here, including the extension (.png, .jpg, "
"etc.). Enter only the file name, not the location (path) of the image file. The "
"image files should be located in the same folder as the DocBook sources."
msgstr ""
#. i18n: file ./scripts/picturewizard.kmdr line 528
#: rc.cpp:3683
#, no-c-format
msgid "image.png"
msgstr "image.png"
#. i18n: file ./scripts/picturewizard.kmdr line 544
#: rc.cpp:3689
#, no-c-format
msgid "Image Description:"
msgstr "圖片描述:"
#. i18n: file ./scripts/gubed_install.kmdr line 18
#: rc.cpp:3695
#, no-c-format
msgid "Gubed Installation v0.1"
msgstr "Gubed 安裝 v0.1"
#. i18n: file ./scripts/gubed_install.kmdr line 124
#: rc.cpp:3701
#, no-c-format
msgid "Target directory:"
msgstr "目的地目錄:"
#. i18n: file ./scripts/gubed_install.kmdr line 132
#: rc.cpp:3704
#, no-c-format
msgid "Archive name:"
msgstr "壓檔包名稱:"
#. i18n: file ./scripts/gubed_install.kmdr line 145
#: rc.cpp:3707
#, no-c-format
msgid "Select the archive containing Gubed (tar.bz2 format)"
msgstr "選擇包含 Gubed 的壓檔包(tar.bz2 格式)"
#. i18n: file ./scripts/gubed_install.kmdr line 161
#: rc.cpp:3710
#, no-c-format
msgid "The target directory (example /var/www)"
msgstr "目的地目錄 (例如 /var/www)"
#. i18n: file ./scripts/gubed_install.kmdr line 179
#: rc.cpp:3713
#, no-c-format
msgid "Run the server after installation has finished"
msgstr "完成安裝後執行伺服器"
#. i18n: file ./scripts/gubed_install.kmdr line 189
#: rc.cpp:3716
#, no-c-format
msgid ""
"If checked the server will be run in the background after the installation has "
"finished"
msgstr ""
#. i18n: file ./scripts/gubed_install.kmdr line 205
#: rc.cpp:3719
#, no-c-format
msgid "View installation log"
msgstr "檢視安裝過程記錄"
#. i18n: file ./scripts/gubed_install.kmdr line 218
#: rc.cpp:3722
#, no-c-format
msgid ""
"Uncheck this if you do not want to see the installation log. The log may "
"provide important information in case of installation failure."
msgstr ""
#. i18n: file ./scripts/gubed_install.kmdr line 234
#: rc.cpp:3725
#, no-c-format
msgid "&Start Installation"
msgstr "開始安裝(&S)"
#. i18n: file ./scripts/dwt.kmdr line 18
#: rc.cpp:3728
#, no-c-format
msgid "dwt - Apply Dreamweaver Template"
msgstr "dwt - 套用 Dreamweaver 範本"
#. i18n: file ./scripts/dwt.kmdr line 77
#: rc.cpp:3740
#, no-c-format
msgid "Full project path:"
msgstr "專案完整路徑:"
#. i18n: file ./scripts/dwt.kmdr line 85
#: rc.cpp:3743
#, no-c-format
msgid "Show debug messages"
msgstr "顯示除錯訊息"
#. i18n: file ./scripts/dwt.kmdr line 93
#: rc.cpp:3746
#, no-c-format
msgid "dwt.pl"
msgstr "dwt.pl"
#. i18n: file ./scripts/dwt.kmdr line 160
#: rc.cpp:3755
#, no-c-format
msgid ""
"The dwt Script will apply actual Dreamweaver templates to all your project "
"files. Just enter the FULL project path and specify where the script dwt.pl can "
"be found."
msgstr ""
#. i18n: file ./scripts/checkxml.kmdr line 18
#: rc.cpp:3758
#, no-c-format
msgid "Quanta+ TDE XML Validator"
msgstr "Quanta+ TDE XML 檢驗器"
#. i18n: file ./scripts/checkxml.kmdr line 98
#: rc.cpp:3761 rc.cpp:3975
#, no-c-format
msgid "&Validate"
msgstr "檢驗(&V)"
#. i18n: file ./scripts/checkxml.kmdr line 184
#: rc.cpp:3767
#, no-c-format
msgid "C&urrent working folder"
msgstr "目前的工作目錄(&U)"
#. i18n: file ./scripts/checkxml.kmdr line 227
#: rc.cpp:3770 rc.cpp:3930
#, no-c-format
msgid "Other folder:"
msgstr "其他目錄:"
#. i18n: file ./scripts/listwizard.kmdr line 18
#: rc.cpp:3773
#, no-c-format
msgid "Docbook List Wizard"
msgstr "Docbook 清單精靈"
#. i18n: file ./scripts/listwizard.kmdr line 87
#: rc.cpp:3779
#, no-c-format
msgid ""
"Press this button to cancel the creation of the list or procedure. No action "
"will be performed."
msgstr ""
#. i18n: file ./scripts/listwizard.kmdr line 123
#: rc.cpp:3785
#, no-c-format
msgid "Press this button to create the selected list or procedure."
msgstr ""
#. i18n: file ./scripts/listwizard.kmdr line 133
#: rc.cpp:3788
#, no-c-format
msgid "List Options"
msgstr "清單選項"
#. i18n: file ./scripts/listwizard.kmdr line 183
#: rc.cpp:3791 rc.cpp:3797
#, no-c-format
msgid ""
"Select or enter in this spin box the number of list entries or steps that "
"should be created by the wizard. After using the wizard, you can add (or "
"remove) more entries or steps manually."
msgstr ""
#. i18n: file ./scripts/listwizard.kmdr line 191
#: rc.cpp:3794
#, fuzzy, no-c-format
msgid "Number of list items or steps:"
msgstr "列數"
#. i18n: file ./scripts/listwizard.kmdr line 218
#: rc.cpp:3800
#, no-c-format
msgid ""
"<qt>\n"
"Select the list type:\n"
"<ul>\n"
"<li><b>variablelist:</b> a list with two sections for each item: the term and "
"the definition.</li>\n"
"<li><b>itemizedlist:</b> a list used when the order of the items is not "
"important.</li>\n"
"<li><b>orderedlist:</b> a list used when the order of the items is important "
"(for instance, a list of things in order of preference). Do not use orderedlist "
"to describe the steps required to perform an action.</li>\n"
"<li><b>procedure:</b> list of an sequence of ordered steps, describing to the "
"reader how to perform a task. You can add substeps later.</li>\n"
"</ul>\n"
"</qt>"
msgstr ""
#. i18n: file ./scripts/listwizard.kmdr line 229
#: rc.cpp:3811
#, no-c-format
msgid "List Type"
msgstr "清單類型"
#. i18n: file ./scripts/listwizard.kmdr line 249
#: rc.cpp:3814
#, no-c-format
msgid "&procedure"
msgstr ""
#. i18n: file ./scripts/listwizard.kmdr line 285
#: rc.cpp:3817
#, no-c-format
msgid ""
"Select this option to create a procedure. A procedure is a sequence of ordered "
"steps, describing to the reader how to perform a task. You can add nested "
"substeps.\n"
"\n"
"Here is one example of a procedure:\n"
"\n"
"<procedure>\n"
"\n"
"<step><para>First step.</para></step>\n"
"\n"
"<step><para>Second step.</para>\n"
"<substeps>\n"
"<step><para>First substep of the second step.</para></step>\n"
"</substeps>\n"
"</step>\n"
"\n"
"</procedure>"
msgstr ""
#. i18n: file ./scripts/listwizard.kmdr line 293
#: rc.cpp:3834
#, fuzzy, no-c-format
msgid "itemi&zedlist"
msgstr "檔案(&F):"
#. i18n: file ./scripts/listwizard.kmdr line 326
#: rc.cpp:3837
#, no-c-format
msgid ""
"Select this option to create a itemizedlist. A itemizedlist is a list used when "
"the order of the items is not important.\n"
"\n"
"Here is one example of a itemizedlist:\n"
"\n"
"<itemizedlist>\n"
"\n"
"<listitem><para>\n"
"First item.\n"
"</para></listitem>\n"
"\n"
"<listitem><para>\n"
"Second item.\n"
"</para></listitem>\n"
"\n"
"</itemizedlist>"
msgstr ""
#. i18n: file ./scripts/listwizard.kmdr line 340
#: rc.cpp:3854
#, no-c-format
msgid "or&deredlist"
msgstr "有排序列表(&D)"
#. i18n: file ./scripts/listwizard.kmdr line 376
#: rc.cpp:3857
#, no-c-format
msgid ""
"Select this option to create a orderedlist. A orderedlist is a list used when "
"the order of the items is important. A number will be associated with each "
"entry, in order, starting from one.\n"
"\n"
"Here is one example of a orderedlist:\n"
"\n"
"<orderedlist>\n"
"\n"
"<listitem><para>\n"
"First item.\n"
"</para></listitem>\n"
"\n"
"<listitem><para>\n"
"Second item.\n"
"</para></listitem>\n"
"\n"
"</orderedlist>"
msgstr ""
#. i18n: file ./scripts/listwizard.kmdr line 387
#: rc.cpp:3874
#, fuzzy, no-c-format
msgid "&variablelist"
msgstr "檔案(&F):"
#. i18n: file ./scripts/listwizard.kmdr line 426
#: rc.cpp:3877
#, no-c-format
msgid ""
"Select this option to create a variablelist. A variablelist is a list with two "
"sections for each item: the term (the tag used is <term>"
") and the definition (the tag used is <listitem>). To mark each entry of the "
"list, the <varlistentry> tag is used.\n"
"\n"
"Here is one example of a variablelist:\n"
"\n"
"<variablelist>\n"
"\n"
"<varlistentry>\n"
"<term>Term text</term>\n"
"<listitem><para>Definition text.</para></listitem>\n"
"</varlistentry>\n"
"\n"
"</variablelist>"
msgstr ""
#. i18n: file ./scripts/docbook_table.kmdr line 18
#: rc.cpp:3891
#, no-c-format
msgid "Docbook Table"
msgstr "Docbook 表格"
#. i18n: file ./scripts/docbook_table.kmdr line 41
#: rc.cpp:3894
#, no-c-format
msgid "DocBook Table"
msgstr "DocBook 表格"
#. i18n: file ./scripts/docbook_table.kmdr line 88
#: rc.cpp:3897
#, no-c-format
msgid "id:"
msgstr "id:"
#. i18n: file ./scripts/docbook_table.kmdr line 124
#: rc.cpp:3903
#, no-c-format
msgid "Columns"
msgstr "欄"
#. i18n: file ./scripts/docbook_table.kmdr line 155
#: rc.cpp:3906
#, no-c-format
msgid "Lines"
msgstr "線"
#. i18n: file ./scripts/docbook_table.kmdr line 182
#: rc.cpp:3909
#, fuzzy, no-c-format
msgid "&Include title line"
msgstr "包含檔案:"
#. i18n: file ./scripts/meinproc.kmdr line 18
#: rc.cpp:3918
#, no-c-format
msgid "Quanta+: meinproc"
msgstr "Quanta+: meinproc"
#. i18n: file ./scripts/meinproc.kmdr line 146
#: rc.cpp:3927
#, no-c-format
msgid "Current working folder &in Quanta"
msgstr "目前在 Quanta 內的工作目錄(&I)"
#. i18n: file ./scripts/meinproc.kmdr line 249
#: rc.cpp:3933
#, no-c-format
msgid "View in &Konqueror"
msgstr "用 Konqueror 預覽(&K)"
#. i18n: file ./scripts/xmlval.kmdr line 18
#: rc.cpp:3936
#, no-c-format
msgid "Quanta+ XML Validator"
msgstr "Quanta+ XML 檢驗器"
#. i18n: file ./scripts/xmlval.kmdr line 92
#: rc.cpp:3939
#, no-c-format
msgid "C&urrent file"
msgstr "目前的檔案(&U)"
#. i18n: file ./scripts/xmlval.kmdr line 155
#: rc.cpp:3942
#, no-c-format
msgid "Other file:"
msgstr "其他檔案:"
#. i18n: file ./scripts/xmlval.kmdr line 209
#: rc.cpp:3945
#, no-c-format
msgid "Validate against:"
msgstr "驗證的 DTD"
#. i18n: file ./scripts/xmlval.kmdr line 232
#: rc.cpp:3948
#, no-c-format
msgid "DTD (Internal)"
msgstr "DTD (內部)"
#. i18n: file ./scripts/xmlval.kmdr line 237
#: rc.cpp:3951
#, no-c-format
msgid "DTD (External)"
msgstr "DTD (外部)"
#. i18n: file ./scripts/xmlval.kmdr line 242
#: rc.cpp:3954
#, no-c-format
msgid "XML Schema"
msgstr "XML Schema"
#. i18n: file ./scripts/xmlval.kmdr line 247
#: rc.cpp:3957 rc.cpp:3963
#, no-c-format
msgid "RelaxNG Schema"
msgstr "RelaxNG Schema"
#. i18n: file ./scripts/xmlval.kmdr line 291
#: rc.cpp:3960
#, no-c-format
msgid "DTD"
msgstr "DTD"
#. i18n: file ./scripts/xmlval.kmdr line 293
#: rc.cpp:3966
#, no-c-format
msgid "W3C XML Schema"
msgstr "W3C XML Schema"
#. i18n: file ./scripts/xmlval.kmdr line 318
#: rc.cpp:3969
#, no-c-format
msgid "Well-formed checking &only"
msgstr "只檢查是否 Well-f&ormed"
#. i18n: file ./scripts/xmlval.kmdr line 374
#: rc.cpp:3972
#, no-c-format
msgid "Definition URI:"
msgstr "定義 URI"
#. i18n: file ./scripts/htmlquickstart.kmdr line 24
#: rc.cpp:3981 rc.cpp:5076
#, no-c-format
msgid "Quick Start"
msgstr "快速開始"
#. i18n: file ./scripts/htmlquickstart.kmdr line 76
#: rc.cpp:3984
#, no-c-format
msgid "Quanta Plus Kommander Quick Start"
msgstr "Quanta Plus Kommander 快速開始"
#. i18n: file ./scripts/htmlquickstart.kmdr line 194
#: rc.cpp:3987
#, no-c-format
msgid "DTD / Schema:"
msgstr "DTD / Schema:"
#. i18n: file ./scripts/htmlquickstart.kmdr line 202
#: rc.cpp:3990
#, no-c-format
msgid "Body Area"
msgstr "Body 區域"
#. i18n: file ./scripts/htmlquickstart.kmdr line 253
#: rc.cpp:3993
#, no-c-format
msgid "&PHP footer include:"
msgstr "&PHP footer 引用:"
#. i18n: file ./scripts/htmlquickstart.kmdr line 268
#: rc.cpp:3996
#, no-c-format
msgid "PHP header include:"
msgstr "PHP header 引用:"
#. i18n: file ./scripts/htmlquickstart.kmdr line 285
#: rc.cpp:3999
#, no-c-format
msgid "Show &DTD"
msgstr "顯示 &DTD"
#. i18n: file ./scripts/htmlquickstart.kmdr line 302
#: rc.cpp:4002
#, no-c-format
msgid "HTML 4.01 Transitional"
msgstr "HTML 4.01 Transitional"
#. i18n: file ./scripts/htmlquickstart.kmdr line 307
#: rc.cpp:4005
#, no-c-format
msgid "HTML 4.01 Strict"
msgstr "HTML 4.01 Strict"
#. i18n: file ./scripts/htmlquickstart.kmdr line 312
#: rc.cpp:4008
#, no-c-format
msgid "HTML 4.01 Frameset"
msgstr "HTML 4.01 Frameset"
#. i18n: file ./scripts/htmlquickstart.kmdr line 317
#: rc.cpp:4011
#, no-c-format
msgid "XHTML 1.0 Transitional"
msgstr "XHTML 1.0 Transitional"
#. i18n: file ./scripts/htmlquickstart.kmdr line 322
#: rc.cpp:4014
#, no-c-format
msgid "XHTML 1.0 Strict"
msgstr "XHTML 1.0 Strict"
#. i18n: file ./scripts/htmlquickstart.kmdr line 327
#: rc.cpp:4017
#, no-c-format
msgid "XHTML 1.0 Frameset"
msgstr "XHTML 1.0 Frameset"
#. i18n: file ./scripts/htmlquickstart.kmdr line 332
#: rc.cpp:4020
#, no-c-format
msgid "XHTML 1.0 Basic"
msgstr "XHTML 1.0 Basic"
#. i18n: file ./scripts/htmlquickstart.kmdr line 337
#: rc.cpp:4023
#, no-c-format
msgid "XHTML 1.1"
msgstr "XHTML 1.1"
#. i18n: file ./scripts/htmlquickstart.kmdr line 413
#: rc.cpp:4026
#, no-c-format
msgid "Head &area"
msgstr "Head 區域(&A)"
#. i18n: file ./scripts/htmlquickstart.kmdr line 441
#: rc.cpp:4029
#, no-c-format
msgid "CVS tag &in comment"
msgstr "註解中的 CVS 標籤(&I)"
#. i18n: file ./scripts/htmlquickstart.kmdr line 481
#: rc.cpp:4032
#, no-c-format
msgid "&Meta author:"
msgstr "&Meta 作者:"
#. i18n: file ./scripts/htmlquickstart.kmdr line 496
#: rc.cpp:4035
#, no-c-format
msgid "Meta character set:"
msgstr "Meta 字元集:"
#. i18n: file ./scripts/htmlquickstart.kmdr line 511
#: rc.cpp:4038
#, no-c-format
msgid "St&yle area"
msgstr "St&yle 區域"
#. i18n: file ./scripts/htmlquickstart.kmdr line 556
#: rc.cpp:4041
#, no-c-format
msgid "iso-8859-1"
msgstr "iso-8859-1"
#. i18n: file ./scripts/htmlquickstart.kmdr line 561
#: rc.cpp:4044
#, no-c-format
msgid "iso-8859-2"
msgstr "iso-8859-2"
#. i18n: file ./scripts/htmlquickstart.kmdr line 566
#: rc.cpp:4047
#, no-c-format
msgid "iso-8859-3"
msgstr "iso-8859-3"
#. i18n: file ./scripts/htmlquickstart.kmdr line 571
#: rc.cpp:4050
#, no-c-format
msgid "iso-8859-4"
msgstr "iso-8859-4"
#. i18n: file ./scripts/htmlquickstart.kmdr line 576
#: rc.cpp:4053
#, no-c-format
msgid "iso-8859-5"
msgstr "iso-8859-5"
#. i18n: file ./scripts/htmlquickstart.kmdr line 581
#: rc.cpp:4056
#, no-c-format
msgid "iso-8859-6"
msgstr "iso-8859-6"
#. i18n: file ./scripts/htmlquickstart.kmdr line 586
#: rc.cpp:4059
#, no-c-format
msgid "iso-8859-7"
msgstr "iso-8859-7"
#. i18n: file ./scripts/htmlquickstart.kmdr line 591
#: rc.cpp:4062
#, no-c-format
msgid "iso-8859-8"
msgstr "iso-8859-8"
#. i18n: file ./scripts/htmlquickstart.kmdr line 596
#: rc.cpp:4065
#, no-c-format
msgid "iso-8859-8i"
msgstr "iso-8859-8i"
#. i18n: file ./scripts/htmlquickstart.kmdr line 601
#: rc.cpp:4068
#, no-c-format
msgid "iso-8859-9"
msgstr "iso-8859-9"
#. i18n: file ./scripts/htmlquickstart.kmdr line 606
#: rc.cpp:4071
#, no-c-format
msgid "iso-8859-10"
msgstr "iso-8859-10"
#. i18n: file ./scripts/htmlquickstart.kmdr line 611
#: rc.cpp:4074
#, no-c-format
msgid "iso-8859-11"
msgstr "iso-8859-11"
#. i18n: file ./scripts/htmlquickstart.kmdr line 616
#: rc.cpp:4077
#, no-c-format
msgid "iso-8859-12"
msgstr "iso-8859-12"
#. i18n: file ./scripts/htmlquickstart.kmdr line 621
#: rc.cpp:4080
#, no-c-format
msgid "iso-8859-13"
msgstr "iso-8859-13"
#. i18n: file ./scripts/htmlquickstart.kmdr line 626
#: rc.cpp:4083
#, no-c-format
msgid "iso-8859-14"
msgstr "iso-8859-14"
#. i18n: file ./scripts/htmlquickstart.kmdr line 631
#: rc.cpp:4086
#, no-c-format
msgid "iso-8859-15"
msgstr "iso-8859-15"
#. i18n: file ./scripts/htmlquickstart.kmdr line 636
#: rc.cpp:4089
#, no-c-format
msgid "utf-8"
msgstr "utf-8"
#. i18n: file ./scripts/htmlquickstart.kmdr line 641
#: rc.cpp:4092
#, no-c-format
msgid "utf-16"
msgstr "utf-16"
#. i18n: file ./scripts/htmlquickstart.kmdr line 646
#: rc.cpp:4095
#, no-c-format
msgid "koi8-r"
msgstr "koi8-r"
#. i18n: file ./scripts/htmlquickstart.kmdr line 651
#: rc.cpp:4098
#, no-c-format
msgid "koi8-u"
msgstr "koi8-u"
#. i18n: file ./scripts/htmlquickstart.kmdr line 656
#: rc.cpp:4101
#, no-c-format
msgid "windows-1250"
msgstr "windows-1250"
#. i18n: file ./scripts/htmlquickstart.kmdr line 661
#: rc.cpp:4104
#, no-c-format
msgid "windows-1251"
msgstr "windows-1251"
#. i18n: file ./scripts/htmlquickstart.kmdr line 666
#: rc.cpp:4107
#, no-c-format
msgid "windows-1252"
msgstr "windows-1252"
#. i18n: file ./scripts/htmlquickstart.kmdr line 671
#: rc.cpp:4110
#, no-c-format
msgid "windows-1253"
msgstr "windows-1253"
#. i18n: file ./scripts/htmlquickstart.kmdr line 676
#: rc.cpp:4113
#, no-c-format
msgid "windows-1254"
msgstr "windows-1254"
#. i18n: file ./scripts/htmlquickstart.kmdr line 681
#: rc.cpp:4116
#, no-c-format
msgid "windows-1255"
msgstr "windows-1255"
#. i18n: file ./scripts/htmlquickstart.kmdr line 686
#: rc.cpp:4119
#, no-c-format
msgid "windows-1256"
msgstr "windows-1256"
#. i18n: file ./scripts/htmlquickstart.kmdr line 691
#: rc.cpp:4122
#, no-c-format
msgid "windows-1257"
msgstr "windows-1257"
#. i18n: file ./scripts/htmlquickstart.kmdr line 696
#: rc.cpp:4125
#, no-c-format
msgid "windows-1258"
msgstr "windows-1258"
#. i18n: file ./scripts/htmlquickstart.kmdr line 724
#: rc.cpp:4128
#, no-c-format
msgid "limit to 8, separate with commas"
msgstr "限制為 8以逗號隔開"
#. i18n: file ./scripts/htmlquickstart.kmdr line 732
#: rc.cpp:4131
#, no-c-format
msgid "&Base directory:"
msgstr "基底目錄(&B)"
#. i18n: file ./scripts/htmlquickstart.kmdr line 747
#: rc.cpp:4134
#, no-c-format
msgid "Meta &Quanta"
msgstr "Meta 加入\" &Quanta \"字樣"
#. i18n: file ./scripts/htmlquickstart.kmdr line 765
#: rc.cpp:4137
#, no-c-format
msgid "Meta &keywords:"
msgstr "Meta 關鍵字(&K)"
#. i18n: file ./scripts/htmlquickstart.kmdr line 782
#: rc.cpp:4140
#, no-c-format
msgid "Li&nked style sheet:"
msgstr "外部樣式表(&N)"
#. i18n: file ./scripts/htmlquickstart.kmdr line 831
#: rc.cpp:4146
#, no-c-format
msgid "&JavaScript area"
msgstr "&JavaScript 區域"
#. i18n: file ./scripts/tablewizard.kmdr line 18
#: rc.cpp:4155
#, no-c-format
msgid "Docbook Table Wizard"
msgstr "Docbook 表格精靈"
#. i18n: file ./scripts/tablewizard.kmdr line 63
#: rc.cpp:4161
#, no-c-format
msgid ""
"Click here to cancel the creation of the table. No action will be performed."
msgstr "按這裏取消表格的建立。建立動作不會被執行。"
#. i18n: file ./scripts/tablewizard.kmdr line 98
#: rc.cpp:4167
#, no-c-format
msgid "Press this button to create the table or informaltable."
msgstr "按這個按鈕建立表格或非正規表格(informaltable)。"
#. i18n: file ./scripts/tablewizard.kmdr line 125
#: rc.cpp:4170
#, no-c-format
msgid "Table Options"
msgstr "表格選項"
#. i18n: file ./scripts/tablewizard.kmdr line 133
#: rc.cpp:4173 rc.cpp:4185 rc.cpp:4197
#, no-c-format
msgid ""
"Enter here the id of the table or informaltable. You can use the id to link or "
"reference to the table or informaltable elsewhere in the document."
msgstr ""
#. i18n: file ./scripts/tablewizard.kmdr line 164
#: rc.cpp:4176
#, no-c-format
msgid "Number of columns:"
msgstr "欄數:"
#. i18n: file ./scripts/tablewizard.kmdr line 167
#: rc.cpp:4179 rc.cpp:4215
#, no-c-format
msgid ""
"Select or enter in this spin box the number of columns that should be created "
"by the wizard."
msgstr ""
#. i18n: file ./scripts/tablewizard.kmdr line 175
#: rc.cpp:4182
#, no-c-format
msgid "Table id:"
msgstr "表格 id:"
#. i18n: file ./scripts/tablewizard.kmdr line 189
#: rc.cpp:4188
#, no-c-format
msgid "&Add table header"
msgstr "加入表格頭部(&A)"
#. i18n: file ./scripts/tablewizard.kmdr line 203
#: rc.cpp:4191
#, no-c-format
msgid ""
"Check this box to create a table header. The table header is the first row of "
"the table, and has the same number of entries as the other rows."
msgstr ""
#. i18n: file ./scripts/tablewizard.kmdr line 211
#: rc.cpp:4194
#, fuzzy, no-c-format
msgid "table_id"
msgstr "表格"
#. i18n: file ./scripts/tablewizard.kmdr line 243
#: rc.cpp:4200 rc.cpp:4206
#, no-c-format
msgid ""
"Select or enter in this spin box the number of rows that should be created by "
"the wizard. After using the wizard, you can add (or remove) more rows. To add "
"more rows, add the same number of <entry> tags per <row> "
"tag as in the rest of the table."
msgstr ""
#. i18n: file ./scripts/tablewizard.kmdr line 251
#: rc.cpp:4203
#, no-c-format
msgid "Number of rows:"
msgstr "列數:"
#. i18n: file ./scripts/tablewizard.kmdr line 265
#: rc.cpp:4209
#, no-c-format
msgid "Table title:"
msgstr "表格標題:"
#. i18n: file ./scripts/tablewizard.kmdr line 268
#: rc.cpp:4212 rc.cpp:4221
#, no-c-format
msgid ""
"Enter here the title of the table. The title of the table will appear in the "
"table of contents as well, under the \"List of Tables\", if you are using the "
"TDE DocBook tools."
msgstr ""
#. i18n: file ./scripts/tablewizard.kmdr line 300
#: rc.cpp:4218
#, no-c-format
msgid "Table Title"
msgstr "表格標題"
#. i18n: file ./scripts/tablewizard.kmdr line 320
#: rc.cpp:4224
#, no-c-format
msgid "Table Type"
msgstr "表格類型"
#. i18n: file ./scripts/tablewizard.kmdr line 337
#: rc.cpp:4227
#, no-c-format
msgid "ta&ble"
msgstr "表格(&B)"
#. i18n: file ./scripts/tablewizard.kmdr line 358
#: rc.cpp:4230
#, no-c-format
msgid "Select this option to generate a formal table (table)."
msgstr "這選項可以產生一個正規表格(table)。"
#. i18n: file ./scripts/tablewizard.kmdr line 369
#: rc.cpp:4233
#, no-c-format
msgid "&informaltable"
msgstr "非正規表格(&I)"
#. i18n: file ./scripts/tablewizard.kmdr line 389
#: rc.cpp:4236
#, no-c-format
msgid "Select this option to generate an informal table (informaltable)."
msgstr "這選項可以產生一個非正規表格(informaltable)。"
#. i18n: file ./scripts/tablewizard.kmdr line 409
#: rc.cpp:4239
#, no-c-format
msgid ""
"<qt>\n"
"Select the table type:\n"
"<ul>\n"
"<li><b>informaltable:</b> the most used table type in TDE docs. A informaltable "
"does not contain title, table head or entry in the table of contents.</li>\n"
"<li><b>table:</b> a complete and formal table type, including title, table head "
"and entry in the table of contents.</li>\n"
"</ul>\n"
"</qt>"
msgstr ""
#: rc.cpp:4246
msgid "! (&#033;) Exclamation mark"
msgstr "! (&#033;) 感嘆號"
#: rc.cpp:4247
#, fuzzy
msgid "\" (&quot;) Quotation mark"
msgstr "\" (&#034;) 括號"
#: rc.cpp:4248
msgid "# (&#035;) Hash mark"
msgstr "# (&#035;) 數字號"
#: rc.cpp:4249
msgid "$ (&#036;) Dollar sign"
msgstr "$ (&#036;) 金錢號"
#: rc.cpp:4250
msgid "% (&#037;) Percent sign"
msgstr "% (&#037;) 百分號"
#: rc.cpp:4251
#, fuzzy
msgid "& (&amp;) Ampersand"
msgstr "& (&#038;) Ampersand"
#: rc.cpp:4252
#, fuzzy
msgid "' (&apos;) Apostrophe"
msgstr "' (&#039;) Apostrophe"
#: rc.cpp:4253
msgid "( (&#040;) Left parenthesis"
msgstr "( (&#040;) 左圓括號"
#: rc.cpp:4254
msgid ") (&#041;) Right parenthesis"
msgstr ") (&#041;) 右圓括號"
#: rc.cpp:4255
msgid "* (&#042;) Asterisk"
msgstr "* (&#042;) 星號"
#: rc.cpp:4256
msgid "+ (&#043;) Plus sign"
msgstr "+ (&#043;) 加號"
#: rc.cpp:4257
msgid ", (&#044;) Comma"
msgstr ", (&#044;) 逗號"
#: rc.cpp:4258
msgid "- (&#045;) Hyphen"
msgstr "- (&#045;) 破折號"
#: rc.cpp:4259
msgid ". (&#046;) Period"
msgstr ". (&#046;) 英文句號"
#: rc.cpp:4260
msgid "/ (&#047;) Slash"
msgstr "/ (&#047;) 斜線"
#: rc.cpp:4261
msgid ": (&#058;) Colon"
msgstr ": (&#058;) 冒號"
#: rc.cpp:4262
msgid "; (&#059;) Semicolon"
msgstr "; (&#059;) 分號"
#: rc.cpp:4263
#, fuzzy
msgid "< (&lt;) Less than"
msgstr "< (&#060;) 小於"
#: rc.cpp:4264
msgid "= (&#061;) Equals sign"
msgstr "= (&#061;) 等號"
#: rc.cpp:4265
#, fuzzy
msgid "> (&gt;) Greater than"
msgstr "> (&#062;) 大於"
#: rc.cpp:4266
msgid "? (&#063;) Question mark"
msgstr "? (&#063;) 問號"
#: rc.cpp:4267
msgid "@ (&#064;) Commercial at sign"
msgstr "@ (&#064;) 'AT'符號"
#: rc.cpp:4268
msgid "[ (&#091;) Left square bracket"
msgstr "[ (&#091;) 左方括"
#: rc.cpp:4269
msgid "\\ (&#092;) Backslash"
msgstr "\\ (&#092;) 反斜線"
#: rc.cpp:4270
msgid "] (&#093;) Right square bracket"
msgstr "] (&#093;) 右方括"
#: rc.cpp:4271
msgid "^ (&#094;) Caret"
msgstr "^ (&#094;) Caret"
#: rc.cpp:4272
msgid "_ (&#095;) Underscore"
msgstr "_ (&#095;) 底線"
#: rc.cpp:4273
msgid "` (&#096;) Grave accent"
msgstr "` (&#096;) Grave accent"
#: rc.cpp:4274
msgid "{ (&#123;) Left curly brace"
msgstr "{ (&#123;) 左括號"
#: rc.cpp:4275
msgid "| (&#124;) Vertical bar"
msgstr "| (&#124;) Vertical bar"
#: rc.cpp:4276
msgid "} (&#125;) Right curly brace"
msgstr "} (&#125;) 右括號"
#: rc.cpp:4277
msgid "~ (&#126;) Tilde"
msgstr "~ (&#126;) Tilde"
#: rc.cpp:4278
#, fuzzy
msgid " (&nbsp;) Nonbreaking space"
msgstr " (&#160;) 非中斷空格"
#: rc.cpp:4279
#, fuzzy
msgid "¡ (&iexcl;) Inverted exclamation mark"
msgstr "¡ (&#161;) 倒轉感嘆號"
#: rc.cpp:4280
#, fuzzy
msgid "¢ (&cent;) Cent sign"
msgstr "¢ (&#162;) 金錢符號--分"
#: rc.cpp:4281
#, fuzzy
msgid "£ (&pound;) Pound sign"
msgstr "£ (&#163;) 金錢符號--英鎊"
#: rc.cpp:4282
#, fuzzy
msgid "¤ (&curren;) Currency sign"
msgstr "¤ (&#164;) 金錢符號--貨幣"
#: rc.cpp:4283
#, fuzzy
msgid "¥ (&yen;) Yen sign"
msgstr "¥ (&#165;) 金錢符號--日元"
#: rc.cpp:4284
#, fuzzy
msgid "¦ (&brvbar;) Broken vertical bar"
msgstr "¦ (&#166;) Broken vertical bar"
#: rc.cpp:4285
#, fuzzy
msgid "§ (&sect;) Section sign"
msgstr "§ (&#167;) 章節表示符"
#: rc.cpp:4286
#, fuzzy
msgid "¨ (&uml;) Diaeresis"
msgstr "¨ (&#168;) Diaeresis"
#: rc.cpp:4287
#, fuzzy
msgid "© (&copy;) Copyright"
msgstr "© (&#169;) 版權標誌"
#: rc.cpp:4288
#, fuzzy
msgid "ª (&ordf;) Feminine ordinal"
msgstr "ª (&#170;) Feminine ordinal"
#: rc.cpp:4289
#, fuzzy
msgid "« (&laquo;) Left Pointing Guillemet"
msgstr "« (&#171;) Left Pointing Guillemet"
#: rc.cpp:4290
#, fuzzy
msgid "¬ (&not;) Not sign"
msgstr "¬ (&#172;) Not sign"
#: rc.cpp:4291
#, fuzzy
msgid " (&shy;) Soft hyphen"
msgstr " (&#173;) Soft hyphen"
#: rc.cpp:4292
#, fuzzy
msgid "® (&reg;) Registered trademark"
msgstr "® (&#174;) 註冊商標"
#: rc.cpp:4293
#, fuzzy
msgid "¯ (&macr;) Macron"
msgstr "¯ (&#175;) Macron"
#: rc.cpp:4294
#, fuzzy
msgid "° (&deg;) Degree sign"
msgstr "° (&#176;) 度數"
#: rc.cpp:4295
#, fuzzy
msgid "± (&plusmn;) Plus-minus sign"
msgstr "± (&#177;) 正負"
#: rc.cpp:4296
#, fuzzy
msgid "² (&sup2;) Superscript 2"
msgstr "² (&#178;) 2 次方"
#: rc.cpp:4297
#, fuzzy
msgid "³ (&sup3;) Superscript 3"
msgstr "³ (&#179;) 3 次方"
#: rc.cpp:4298
#, fuzzy
msgid "´ (&acute;) Acute accent"
msgstr "´ (&#180;) Acute accent"
#: rc.cpp:4299
#, fuzzy
msgid "µ (&micro;) Micro sign"
msgstr "µ (&#181;) 微單位(Micro)"
#: rc.cpp:4300
#, fuzzy
msgid "¶ (&para;) Paragraph sign"
msgstr "¶ (&#182;) 段落符"
#: rc.cpp:4301
#, fuzzy
msgid "· (&middot;) Middle dot"
msgstr "· (&#183;) Middle dot"
#: rc.cpp:4302
#, fuzzy
msgid "¸ (&cedil;) Cedilla"
msgstr "¸ (&#184;) Cedilla"
#: rc.cpp:4303
#, fuzzy
msgid "¹ (&sup1;) Superscript 1"
msgstr "¹ (&#185;) 1 次方"
#: rc.cpp:4304
#, fuzzy
msgid "º (&ordm;) Masculine ordinal"
msgstr "º (&#186;) Masculine ordinal"
#: rc.cpp:4305
#, fuzzy
msgid "» (&raquo;) Right Pointing Guillemet"
msgstr "» (&#187;) Right Pointing Guillemet"
#: rc.cpp:4306
#, fuzzy
msgid "¼ (&frac14;) Fraction one-fourth"
msgstr "¼ (&#188;) 四分之一"
#: rc.cpp:4307
#, fuzzy
msgid "½ (&frac12;) Fraction one-half"
msgstr "½ (&#189;) 二分之一"
#: rc.cpp:4308
#, fuzzy
msgid "¾ (&frac34;) Fraction three-fourths"
msgstr "¾ (&#190;) 四分之三"
#: rc.cpp:4309
#, fuzzy
msgid "¿ (&iquest;) Inverted question mark"
msgstr "¿ (&#191;) 倒轉問號"
#: rc.cpp:4310
#, fuzzy
msgid "À (&Agrave;) Capital A, grave accent"
msgstr "À (&#192;) 大寫 A, grave accent"
#: rc.cpp:4311
#, fuzzy
msgid "Á (&Aacute;) Capital A, acute accent"
msgstr "Á (&#193;) 大寫 A, acute accent"
#: rc.cpp:4312
#, fuzzy
msgid "Â (&Acirc;) Capital A, circumflex accent"
msgstr "Â (&#194;) 大寫 A, circumflex accent"
#: rc.cpp:4313
#, fuzzy
msgid "Ã (&Atilde;) Capital A, tilde"
msgstr "Ã (&#195;) 大寫 A, tilde"
#: rc.cpp:4314
#, fuzzy
msgid "Ä (&Auml;) Capital A, diaeresis"
msgstr "Ä (&#196;) 大寫 A, diaeresis"
#: rc.cpp:4315
#, fuzzy
msgid "Å (&Aring;) Capital A, ring"
msgstr "Å (&#197;) Capital A, ring"
#: rc.cpp:4316
#, fuzzy
msgid "Æ (&AElig;) Capital AE ligature"
msgstr "Æ (&#198;) Capital AE ligature"
#: rc.cpp:4317
#, fuzzy
msgid "Ç (&Ccedil;) Capital C, cedilla"
msgstr "Ç (&#199;) Capital C, cedilla"
#: rc.cpp:4318
#, fuzzy
msgid "È (&Egrave;) Capital E, grave accent"
msgstr "È (&#200;) Capital E, grave accent"
#: rc.cpp:4319
#, fuzzy
msgid "É (&Eacute;) Capital E, acute accent"
msgstr "É (&#201;) Capital E, acute accent"
#: rc.cpp:4320
#, fuzzy
msgid "Ê (&Ecirc;) Capital E, circumflex accent"
msgstr "Ê (&#202;) Capital E, circumflex accent"
#: rc.cpp:4321
#, fuzzy
msgid "Ë (&Euml;) Capital E, diaeresis"
msgstr "Ë (&#203;) Capital E, diaeresis"
#: rc.cpp:4322
#, fuzzy
msgid "Ì (&Igrave;) Capital I, grave accent"
msgstr "Ì (&#204;) Capital I, grave accent"
#: rc.cpp:4323
#, fuzzy
msgid "Í (&Iacute;) Capital I, acute accent"
msgstr "Í (&#205;) Capital I, acute accent"
#: rc.cpp:4324
#, fuzzy
msgid "Î (&Icirc;) Capital I, circumflex accent"
msgstr "Î (&#206;) Capital I, circumflex accent"
#: rc.cpp:4325
#, fuzzy
msgid "Ï (&Iuml;) Capital I, diaeresis"
msgstr "Ï (&#207;) Capital I, diaeresis"
#: rc.cpp:4326
#, fuzzy
msgid "Ð (&ETH;) Capital eth"
msgstr "Ð (&#208;) Capital eth"
#: rc.cpp:4327
#, fuzzy
msgid "Ñ (&Ntilde;) Capital N, tilde"
msgstr "Ñ (&#209;) Capital N, tilde"
#: rc.cpp:4328
#, fuzzy
msgid "Ò (&Ograve;) Capital O, grave accent"
msgstr "Ò (&#210;) Capital O, grave accent"
#: rc.cpp:4329
#, fuzzy
msgid "Ó (&Oacute;) Capital O, acute accent"
msgstr "Ó (&#211;) Capital O, acute accent"
#: rc.cpp:4330
#, fuzzy
msgid "Ô (&Ocirc;) Capital O, circumflex accent"
msgstr "Ô (&#212;) Capital O, circumflex accent"
#: rc.cpp:4331
#, fuzzy
msgid "Õ (&Otilde;) Capital O, tilde"
msgstr "Õ (&#213;) Capital O, tilde"
#: rc.cpp:4332
#, fuzzy
msgid "Ö (&Ouml;) Capital O, diaeresis"
msgstr "Ö (&#214;) Capital O, diaeresis"
#: rc.cpp:4333
#, fuzzy
msgid "× (&times;) Multiplication"
msgstr "× (&#215;) 乘號"
#: rc.cpp:4334
#, fuzzy
msgid "Ø (&Oslash;) Capital O, slash"
msgstr "Ø (&#216;) Capital O, slash"
#: rc.cpp:4335
#, fuzzy
msgid "Ù (&Ugrave;) Capital U, grave accent"
msgstr "Ù (&#217;) Capital U, grave accent"
#: rc.cpp:4336
#, fuzzy
msgid "Ú (&Uacute;) Capital U, acute accent"
msgstr "Ú (&#218;) Capital U, acute accent"
#: rc.cpp:4337
#, fuzzy
msgid "Û (&Ucirc;) Capital U, circumflex accent"
msgstr "Û (&#219;) Capital U, circumflex accent"
#: rc.cpp:4338
#, fuzzy
msgid "Ü (&Uuml;) Capital U, diaeresis"
msgstr "Ü (&#220;) Capital U, diaeresis"
#: rc.cpp:4339
#, fuzzy
msgid "Ý (&Yacute;) Capital Y, acute accent"
msgstr "Ý (&#221;) Capital Y, acute accent"
#: rc.cpp:4340
#, fuzzy
msgid "Þ (&THORN;) Capital thorn"
msgstr "Þ (&#222;) Capital thorn"
#: rc.cpp:4341
#, fuzzy
msgid "ß (&szlig;) Small Sharp s"
msgstr "ß (&#223;) Small Sharp s"
#: rc.cpp:4342
#, fuzzy
msgid "à (&agrave;) Small a, grave accent"
msgstr "à (&#224;) Small a, grave accent"
#: rc.cpp:4343
#, fuzzy
msgid "á (&aacute;) Small a, acute accent"
msgstr "á (&#225;) Small a, acute accent"
#: rc.cpp:4344
#, fuzzy
msgid "â (&acirc;) Small a, circumflex accent"
msgstr "â (&#226;) Small a, circumflex accent"
#: rc.cpp:4345
#, fuzzy
msgid "ã (&atilde;) Small a, tilde"
msgstr "ã (&#227;) Small a, tilde"
#: rc.cpp:4346
#, fuzzy
msgid "ä (&auml;) Small a, diaeresis"
msgstr "ä (&#228;) Small a, diaeresis"
#: rc.cpp:4347
#, fuzzy
msgid "å (&aring;) Small a, ring"
msgstr "å (&#229;) Small a, ring"
#: rc.cpp:4348
#, fuzzy
msgid "æ (&aelig;) Small ae ligature"
msgstr "æ (&#230;) Small ae ligature"
#: rc.cpp:4349
#, fuzzy
msgid "ç (&ccedil;) Small c, cedilla"
msgstr "ç (&#231;) Small c, cedilla"
#: rc.cpp:4350
#, fuzzy
msgid "è (&egrave;) Small e, grave accent"
msgstr "è (&#232;) Small e, grave accent"
#: rc.cpp:4351
#, fuzzy
msgid "é (&eacute;) Small e, acute accent"
msgstr "é (&#233;) Small e, acute accent"
#: rc.cpp:4352
#, fuzzy
msgid "ê (&circ;) Small e, circumflex accent"
msgstr "ê (&#234;) Small e, circumflex accent"
#: rc.cpp:4353
#, fuzzy
msgid "ë (&euml;) Small e, diaeresis"
msgstr "ë (&#235;) Small e, diaeresis"
#: rc.cpp:4354
#, fuzzy
msgid "ì (&igrave;) Small i, grave accent"
msgstr "ì (&#236;) Small i, grave accent"
#: rc.cpp:4355
#, fuzzy
msgid "í (&iacute;) Small i, acute accent"
msgstr "í (&#237;) Small i, acute accent"
#: rc.cpp:4356
#, fuzzy
msgid "î (&icirc;) Small i, circumflex accent"
msgstr "î (&#238;) Small i, circumflex accent"
#: rc.cpp:4357
#, fuzzy
msgid "ï (&iuml;) Small i, diaeresis"
msgstr "ï (&#239;) Small i, diaeresis"
#: rc.cpp:4358
#, fuzzy
msgid "ð (&eth;) Small eth"
msgstr "ð (&#240;) Small eth"
#: rc.cpp:4359
#, fuzzy
msgid "ñ (&ntilde;) Small n, tilde"
msgstr "ñ (&#241;) Small n, tilde"
#: rc.cpp:4360
#, fuzzy
msgid "ò (&ograve;) Small o, grave accent"
msgstr "ò (&#242;) Small o, grave accent"
#: rc.cpp:4361
#, fuzzy
msgid "ó (&oacute;) Small o, acute accent"
msgstr "ó (&#243;) Small o, acute accent"
#: rc.cpp:4362
#, fuzzy
msgid "ô (&ocirc;) Small o, circumflex accent"
msgstr "ô (&#244;) Small o, circumflex accent"
#: rc.cpp:4363
#, fuzzy
msgid "õ (&otilde;) Small o, tilde"
msgstr "õ (&#245;) Small o, tilde"
#: rc.cpp:4364
#, fuzzy
msgid "ö (&ouml;) Small o, diaeresis"
msgstr "ö (&#246;) Small o, diaeresis"
#: rc.cpp:4365
#, fuzzy
msgid "÷ (&divide;) Division"
msgstr "÷ (&#247;) Division"
#: rc.cpp:4366
#, fuzzy
msgid "ø (&oslash;) Small o, slash"
msgstr "ø (&#248;) Small o, slash"
#: rc.cpp:4367
#, fuzzy
msgid "ù (&ugrave;) Small u, grave accent"
msgstr "ù (&#249;) Small u, grave accent"
#: rc.cpp:4368
#, fuzzy
msgid "ú (&uacute;) Small u, acute accent"
msgstr "ú (&#250;) Small u, acute accent"
#: rc.cpp:4369
#, fuzzy
msgid "û (&ucirc;) Small u, circumflex accent"
msgstr "û (&#251;) Small u, circumflex accent"
#: rc.cpp:4370
#, fuzzy
msgid "ü (&uuml;) Small u, diaeresis"
msgstr "ü (&#252;) Small u, diaeresis"
#: rc.cpp:4371
#, fuzzy
msgid "ý (&yacute;) Small y, acute accent"
msgstr "ý (&#253;) Small y, acute accent"
#: rc.cpp:4372
#, fuzzy
msgid "þ (&thorn;) Small thorn"
msgstr "þ (&#254;) Small thorn"
#: rc.cpp:4373
#, fuzzy
msgid "ÿ (&yuml;) Small y, diaeresis"
msgstr "ÿ (&#255;) Small y, diaeresis"
#: rc.cpp:4374
msgid "Ă (&#258;) Capital A, romanian accent"
msgstr "Ă (&#258;) Capital A, romanian accent"
#: rc.cpp:4375
msgid "ă (&#259;) Small a, romanian accent"
msgstr "ă (&#259;) Small a, romanian accent"
#: rc.cpp:4376
#, fuzzy
msgid "č (&#269;) Small c, caron"
msgstr "å (&#229;) Small a, ring"
#: rc.cpp:4377
#, fuzzy
msgid "ď (&#271;) Small d, caron"
msgstr "å (&#229;) Small a, ring"
#: rc.cpp:4378
#, fuzzy
msgid "ě (&#283;) Small e, caron"
msgstr "ë (&#235;) Small e, diaeresis"
#: rc.cpp:4379
#, fuzzy
msgid "ň (&#328;) Small n, caron"
msgstr "å (&#229;) Small a, ring"
#: rc.cpp:4380
#, fuzzy
msgid "ř (&#345;) Small r, caron"
msgstr "ţ (&#355;) Small t, cedilla accent"
#: rc.cpp:4381
msgid "Ş (&#350;) Capital S, cedilla accent"
msgstr "Ş (&#350;) Capital S, cedilla accent"
#: rc.cpp:4382
msgid "ş (&#351;) Small s, cedilla accent"
msgstr "ş (&#351;) Small s, cedilla accent"
#: rc.cpp:4383
#, fuzzy
msgid "š (&#353;) Small s, caron"
msgstr "ş (&#351;) Small s, cedilla accent"
#: rc.cpp:4384
msgid "Ţ (&#354;) Capital T, cedilla accent"
msgstr "Ţ (&#354;) Capital T, cedilla accent"
#: rc.cpp:4385
msgid "ţ (&#355;) Small t, cedilla accent"
msgstr "ţ (&#355;) Small t, cedilla accent"
#: rc.cpp:4386
#, fuzzy
msgid "ť (&#357;) Small t, caron"
msgstr "ţ (&#355;) Small t, cedilla accent"
#: rc.cpp:4387
#, fuzzy
msgid "ů (&#367;) Small u, ring above"
msgstr "å (&#229;) Small a, ring"
#: rc.cpp:4388
#, fuzzy
msgid "ž (&#382;) Small z, caron"
msgstr "å (&#229;) Small a, ring"
#: rc.cpp:4389
msgid "Ş (&#536;) Capital S, comma accent below"
msgstr "Ş (&#536;) Capital S, comma accent below"
#: rc.cpp:4390
msgid "ş (&#537;) Small s, comma accent below"
msgstr "ş (&#537;) Small s, comma accent below"
#: rc.cpp:4391
msgid "Ţ (&#538;) Capital T, comma accent below"
msgstr "Ţ (&#538;) Capital T, comma accent below"
#: rc.cpp:4392
msgid "ţ (&#539;) Small t, comma accent below"
msgstr "ţ (&#539;) Small t, comma accent below"
#: rc.cpp:4393
msgid " (&#8208;) Hyphen"
msgstr " (&#8208;) Hyphen"
#: rc.cpp:4394
#, fuzzy
msgid " (&ndash;) En dash"
msgstr " (&#8211;) En dash"
#: rc.cpp:4395
#, fuzzy
msgid "— (&mdash;) Em dash"
msgstr "— (&#8212;) Em dash"
#: rc.cpp:4396
#, fuzzy
msgid " (&lsquo;) Left Single Quotation mark"
msgstr " (&#8216;) 左英文單引號"
#: rc.cpp:4397
#, fuzzy
msgid " (&rsquo;) Right Single Quotation mark"
msgstr " (&#8217;) 右英文單引號"
#: rc.cpp:4398
#, fuzzy
msgid " (&sbquo;) Single Low-9 Quotation mark"
msgstr " (&#8218;) Single Low-9 Quotation mark"
#: rc.cpp:4399
#, fuzzy
msgid "“ (&ldquo;) Left Double Quotation mark"
msgstr "“ (&#8220;) 左英文雙引號"
#: rc.cpp:4400
#, fuzzy
msgid "” (&rdquo;) Right Double Quotation mark"
msgstr "” (&#8221;) 右英文雙引號"
#: rc.cpp:4401
#, fuzzy
msgid "„ (&bdquo;) Double Low-9 Quotation mark"
msgstr "„ (&#8222;) Double Low-9 Quotation mark"
#: rc.cpp:4402
#, fuzzy
msgid "† (&dagger;) Dagger"
msgstr "† (&#8224;) Dagger"
#: rc.cpp:4403
#, fuzzy
msgid "‡ (&Dagger;) Double Dagger"
msgstr "‡ (&#8225;) Double Dagger"
#: rc.cpp:4404
#, fuzzy
msgid "• (&bull;) Bullet"
msgstr "• (&#8226;) Bullet"
#: rc.cpp:4405
#, fuzzy
msgid "… (&hellip;) Horizontal Ellipsis"
msgstr "… (&#8230;) Horizontal Ellipsis"
#: rc.cpp:4406
#, fuzzy
msgid "‰ (&permil;) Per Mille sign"
msgstr "‰ (&#8240;) Per Mille sign"
#: rc.cpp:4407
#, fuzzy
msgid " (&lsaquo;) Single Left-Pointing Angle Quotation mark"
msgstr " (&#8249;) Single Left-Pointing Angle Quotation mark"
#: rc.cpp:4408
#, fuzzy
msgid " (&rsaquo;) Single Right-Pointing Angle Quotation mark"
msgstr " (&#8250;) Single Right-Pointing Angle Quotation mark"
#: rc.cpp:4409
#, fuzzy
msgid " (&frasl;) Fraction slash"
msgstr " (&#8260;) Fraction slash"
#: rc.cpp:4410
msgid "₣ (&#8355;) French Franc sign"
msgstr "₣ (&#8355;) French Franc sign"
#: rc.cpp:4411
msgid "₧ (&#8359;) Peseta sign"
msgstr "₧ (&#8359;) Peseta sign"
#: rc.cpp:4412
msgid "₪ (&#8362;) New Sheqel sign"
msgstr "₪ (&#8362;) New Sheqel sign"
#: rc.cpp:4413
msgid "₫ (&#8363;) Dong sign"
msgstr "₫ (&#8363;) Dong sign"
#: rc.cpp:4414
#, fuzzy
msgid "€ (&euro;) Euro currency sign"
msgstr "€ (&#8364;) 歐元"
#: rc.cpp:4415
#, fuzzy
msgid "™ (&trade;) Trade Mark sign"
msgstr "™ (&#8482;) 商標"
#. i18n: file extrafiles line 38
#: rc.cpp:4424 rc.cpp:4486
#, no-c-format
msgid ""
"The <b>FONT</b> element allows authors to suggest rudimentary <i>"
"font changes</i>.\n"
" "
msgstr ""
#. i18n: file extrafiles line 45
#: rc.cpp:4428 rc.cpp:4490
#, no-c-format
msgid ""
"This <b>SIZE=+1</b> element allows to <i>increase</i> font.\n"
" "
msgstr ""
"<b>SIZE=+1</b> 元素使字型<i>放大</i>。\n"
" "
#. i18n: file extrafiles line 51
#: rc.cpp:4432 rc.cpp:4494
#, no-c-format
msgid ""
"This <b>SIZE=-1</b> element allows to <i>decrease</i> font.\n"
" "
msgstr ""
"<b>SIZE=-1</b> 元素使字型<i>縮小</i>。\n"
" "
#. i18n: file extrafiles line 57
#: rc.cpp:4436 rc.cpp:4498 rc.cpp:4637 rc.cpp:4994
#, no-c-format
msgid ""
"The <b>PRE</b> element allows to view <i>preformatted</i> text.\n"
" "
msgstr ""
"<b>PRE</b> 元素會顯示<i>預先格式化</i>的文字。\n"
" "
#. i18n: file extrafiles line 64
#: rc.cpp:4440 rc.cpp:4502 rc.cpp:4641
#, no-c-format
msgid ""
"The <b>SUB</b> element is used for <i>subscripts</i>.\n"
" "
"<br>- common attributes\n"
" "
msgstr ""
"<b>SUB</b> 元素把文字<i>下標</i>顯示。\n"
" "
"<br>- 一般屬性\n"
" "
#. i18n: file extrafiles line 71
#: rc.cpp:4445 rc.cpp:4507 rc.cpp:4646
#, no-c-format
msgid ""
"The <b>SUP</b> element is used for <i>superscripts</i>.\n"
" "
"<br>- common attributes\n"
" "
msgstr ""
"<b>SUP</b> 元素把文字<i>上標</i>顯示。\n"
" "
"<br>- 一般屬性\n"
" "
#. i18n: file extrafiles line 79
#: rc.cpp:4450 rc.cpp:4512 rc.cpp:4651
#, no-c-format
msgid ""
"The <b>H1</b> element defines a <i>level-one heading</i>.\n"
" "
"<br>- ALIGN=[ left | center | right | justify ] (horizontal alignment)\n"
" "
"<br>- common attributes\n"
" "
msgstr ""
"<b>H1</b> 元素定義一個<i>level-1 標題</i>。\n"
" "
"<br>- ALIGN=[ left | center | right | justify ] (橫向對齊)\n"
" "
"<br>- 一般屬性\n"
" "
#. i18n: file extrafiles line 87
#: rc.cpp:4456 rc.cpp:4518 rc.cpp:4657
#, no-c-format
msgid ""
"The <b>H2</b> element defines a <i>level-two heading</i>.\n"
" "
"<br>- ALIGN=[ left | center | right | justify ] (horizontal alignment)\n"
" "
"<br>- common attributes\n"
" "
msgstr ""
"<b>H2</b> 元素定義一個<i>level-2 標題</i>。\n"
" "
"<br>- ALIGN=[ left | center | right | justify ] (橫向對齊)\n"
" "
"<br>- 一般屬性\n"
" "
#. i18n: file extrafiles line 95
#: rc.cpp:4462 rc.cpp:4524 rc.cpp:4663
#, no-c-format
msgid ""
"The <b>H3</b> element defines a <i>level-three heading</i>.\n"
" "
"<br>- ALIGN=[ left | center | right | justify ] (horizontal alignment)\n"
" "
"<br>- common attributes\n"
" "
msgstr ""
"<b>H3</b> 元素定義一個<i>level-3 標題</i>。\n"
" "
"<br>- ALIGN=[ left | center | right | justify ] (橫向對齊)\n"
" "
"<br>- 一般屬性\n"
" "
#. i18n: file extrafiles line 103
#: rc.cpp:4468 rc.cpp:4530 rc.cpp:4669
#, no-c-format
msgid ""
"The <b>H4</b> element defines a <i>level-four heading</i>.\n"
" "
"<br>- ALIGN=[ left | center | right | justify ] (horizontal alignment)\n"
" "
"<br>- common attributes\n"
" "
msgstr ""
"<b>H4</b> 元素定義一個<i>level-4 標題</i>。\n"
" "
"<br>- ALIGN=[ left | center | right | justify ] (橫向對齊)\n"
" "
"<br>- 一般屬性\n"
" "
#. i18n: file extrafiles line 111
#: rc.cpp:4474 rc.cpp:4536 rc.cpp:4675
#, no-c-format
msgid ""
"The <b>H5</b> element defines a <i>level-five heading</i>.\n"
" "
"<br>- ALIGN=[ left | center | right | justify ] (horizontal alignment)\n"
" "
"<br>- common attributes\n"
" "
msgstr ""
"<b>H5</b> 元素定義一個<i>level-5 標題</i>。\n"
" "
"<br>- ALIGN=[ left | center | right | justify ] (橫向對齊)\n"
" "
"<br>- 一般屬性\n"
" "
#. i18n: file extrafiles line 117
#: rc.cpp:4480 rc.cpp:4628
#, no-c-format
msgid "Lists"
msgstr "列表"
#. i18n: file extrafiles line 261
#: rc.cpp:4542 rc.cpp:4631
#, no-c-format
msgid "Tables"
msgstr "表格"
#. i18n: file extrafiles line 323
#: rc.cpp:4545 rc.cpp:4634
#, no-c-format
msgid "Forms"
msgstr "表單"
#. i18n: file extrafiles line 385
#: rc.cpp:4548 rc.cpp:4684 rc.cpp:4761
#, no-c-format
msgid ""
"The <b>B</b> element suggests that text be rendered as <i>bold text</i>.\n"
" "
"<br>- common attributes\n"
" "
msgstr ""
"<b>B</b> 元素使文字以<i>粗體顯示</i>。\n"
" "
"<br>- 一般屬性\n"
" "
#. i18n: file extrafiles line 392
#: rc.cpp:4553 rc.cpp:4689 rc.cpp:4766
#, no-c-format
msgid ""
"The <b>I</b> element suggests that text be rendered as <i>italic text</i>.\n"
" "
"<br>- common attributes\n"
" "
msgstr ""
"<b>I</b> 元素使文字以<i>鈄體顯示</i>。\n"
" "
"<br>- 一般屬性\n"
" "
#. i18n: file extrafiles line 401
#: rc.cpp:4558 rc.cpp:4694 rc.cpp:4771
#, no-c-format
msgid ""
"The <b>U</b> element, deprecated in HTML 4.0, suggests that text be rendered as "
"<i>underlined text</i>.\n"
" "
"<br>- common attributes\n"
" "
msgstr ""
"<b>U</b> 元素使文字顯示時<i>下加底線</i>,但在 HTML 4.0 標準中將被廢棄。\n"
" "
"<br>- 一般屬性\n"
" "
#. i18n: file extrafiles line 408
#: rc.cpp:4563 rc.cpp:4699 rc.cpp:4776
#, no-c-format
msgid ""
"The <b>BR</b> element forces a <i>break</i> in the current line of text.\n"
" "
"<br>- CLEAR=[ left | all | right | none ] (clear floating objects)\n"
" "
"<br>- core attributes\n"
" "
msgstr ""
"<b>BR</b> 元素會在目前的文字列中<i>強制換行</i>。\n"
" "
"<br>- CLEAR=[ left | all | right | none ] (clear floating objects)\n"
" "
"<br>- 核心屬性\n"
" "
#. i18n: file extrafiles line 416
#: rc.cpp:4569 rc.cpp:4705 rc.cpp:4782
#, no-c-format
msgid ""
"The <b>P</b> element defines a <i>paragraph</i>.\n"
" "
"<br>- ALIGN=[ left | center | right | justify ] (horizontal alignment)\n"
" "
"<br>- common attributes\n"
" "
msgstr ""
"<b>P</b> 元素定義一<i>段落</i>.\n"
" "
"<br>- ALIGN=[ left | center | right | justify ] (橫向對齊)\n"
" "
"<br>- 一般屬性\n"
" "
#. i18n: file extrafiles line 419
#: rc.cpp:4575 rc.cpp:4711 rc.cpp:4788
#, no-c-format
msgid "&nbsp;"
msgstr "&nbsp;"
#. i18n: file extrafiles line 422
#: rc.cpp:4578 rc.cpp:4714 rc.cpp:4791
#, no-c-format
msgid ""
"Inserting <b>nbsp</b>.\n"
" Non breaking <i>space</i>.\n"
" "
msgstr ""
"正在插入 <b>nbsp</b>。\n"
" 非中斷<i>空格</i>。\n"
" "
#. i18n: file extrafiles line 429
#: rc.cpp:4583 rc.cpp:4719 rc.cpp:4796
#, no-c-format
msgid ""
"The <b>A</b> element denotes an <i>anchor</i>--a hypertext link or the "
"destination of a link.\n"
" The <b>HREF</b> attribute specifies a hypertext link to another resource, "
"such as an <i>HTML</i> document or a <i>JPEG</i> image.\n"
" "
msgstr ""
"<b>A</b> 代表一個<i>超連結</i>-- 可以是超文本連結/連結的目的地。\n"
" 屬性 <b>HREF</b> 指定一個往其他資源的超文本連結,如一個 <i>HTML</i> 文件或一張 <i>JPEG</i> 圖片。\n"
" "
#. i18n: file extrafiles line 435
#: rc.cpp:4588 rc.cpp:4724 rc.cpp:4801 rc.cpp:5020
#, no-c-format
msgid ""
"The <b>IMG</b> element specifies an <i>inline</i> image.\n"
" The required <b>SRC</b> attribute specifies the location of the image.\n"
" "
msgstr ""
"<b>IMG</b> 元素指定一張<i>外部引入</i>的圖片。\n"
" 它需要 <b>SRC</b> 屬性來指明圖片的位置。\n"
" "
#. i18n: file extrafiles line 441
#: rc.cpp:4593 rc.cpp:4729 rc.cpp:4806
#, no-c-format
msgid ""
"The <b>HR</b> element defines a <i>horizontal rule</i> for visual browsers.\n"
" While this element is inherently presentational, it can be used "
"structurally as a section divider.\n"
" "
msgstr ""
"<b>HR</b> 元素為視覺瀏覽器定義一條<i>橫線</i>。\n"
" 這個元素天生就適合用作演示格式化之用。它可以用來分割段落。\n"
" "
#. i18n: file extrafiles line 447
#: rc.cpp:4598 rc.cpp:4734 rc.cpp:4811 rc.cpp:4870
#, no-c-format
msgid ""
"The <b>!-- --></b> element <i>comment</i> a text inside.\n"
" "
msgstr ""
"<b>!-- --></b> 元素把它裏面的文字當作<i>註解</i>。\n"
" "
#. i18n: file extrafiles line 454
#: rc.cpp:4602 rc.cpp:4738 rc.cpp:4815
#, no-c-format
msgid ""
"The <b>DIV ALIGN</b>=<i>left</i>\n"
" suggests the horizontal alignment for the content of the division to <i>"
"left</i>.\n"
" "
msgstr ""
#. i18n: file extrafiles line 461
#: rc.cpp:4607 rc.cpp:4743 rc.cpp:4820
#, no-c-format
msgid ""
"The <b>DIV ALIGN</b>=<i>center</i> or <b>CENTER</b>\n"
" suggests the horizontal alignment for the content of the division to <i>"
"center</i>.\n"
" "
msgstr ""
#. i18n: file extrafiles line 468
#: rc.cpp:4612 rc.cpp:4748 rc.cpp:4825
#, no-c-format
msgid ""
"The <b>DIV ALIGN</b>=<i>right</i>\n"
" suggests the horizontal alignment for the content of the division to <i>"
"right</i>.\n"
" "
msgstr ""
#. i18n: file extrafiles line 475
#: rc.cpp:4617 rc.cpp:4753 rc.cpp:4830
#, no-c-format
msgid ""
"The <b>DIV ALIGN</b>=<i>justify</i>\n"
" suggests the horizontal alignment for the content of the division to <i>"
"justify</i>.\n"
" "
msgstr ""
#. i18n: file extrafiles line 481
#: rc.cpp:4622 rc.cpp:4758 rc.cpp:4835
#, no-c-format
msgid "Standard"
msgstr "標準的"
#. i18n: file extrafiles line 518
#: rc.cpp:4625
#, no-c-format
msgid "CFML"
msgstr "CFML"
#. i18n: file extrafiles line 787
#: rc.cpp:4681 rc.cpp:5167
#, no-c-format
msgid "Style"
msgstr "風格"
#. i18n: file extrafiles line 1109
#: rc.cpp:4841
#, no-c-format
msgid "Docbook - UI"
msgstr "Docbook - UI"
#. i18n: file extrafiles line 1153
#: rc.cpp:4844 rc.cpp:4892 rc.cpp:4937
#, no-c-format
msgid "tagxml"
msgstr ""
#. i18n: file extrafiles line 1203
#: rc.cpp:4847
#, no-c-format
msgid ""
"<chapter id=&quot;&quot;>\n"
"<!-- -->\n"
"\n"
"<title></title>\n"
"\n"
"<para></para>\n"
"\n"
"\n"
"\n"
"<sect1>\n"
"\n"
"<title></title>\n"
"\n"
"<para></para>\n"
"\n"
"</sect1>\n"
"\n"
"\n"
"\n"
"</chapter>\n"
msgstr ""
"<chapter id=&quot;&quot;>\n"
"<!-- -->\n"
"\n"
"<title></title>\n"
"\n"
"<para></para>\n"
"\n"
"\n"
"\n"
"<sect1>\n"
"\n"
"<title></title>\n"
"\n"
"<para></para>\n"
"\n"
"</sect1>\n"
"\n"
"\n"
"\n"
"</chapter>\n"
#. i18n: file extrafiles line 1256
#: rc.cpp:4874
#, no-c-format
msgid ""
"<figure id=&quot;&quot;>\n"
"<title></title>\n"
"<graphic fileref=&quot;&quot;/>\n"
"</figure>\n"
msgstr ""
"<figure id=&quot;&quot;>\n"
"<title></title>\n"
"<graphic fileref=&quot;&quot;/>\n"
"</figure>\n"
#. i18n: file extrafiles line 1264
#: rc.cpp:4881
#, no-c-format
msgid ""
"<example role=&quot;codelisting&quot; id=&quot;&quot;>\n"
"<title></title>\n"
"<programlisting><![CDATA[\n"
"\n"
"]]></programlisting>\n"
"</example>"
msgstr ""
"<example role=&quot;codelisting&quot; id=&quot;&quot;>\n"
"<title></title>\n"
"<programlisting><![CDATA[\n"
"\n"
"]]></programlisting>\n"
"</example>"
#. i18n: file extrafiles line 1303
#: rc.cpp:4889
#, no-c-format
msgid "XML Tools"
msgstr "XML 工具"
#. i18n: file extrafiles line 1404
#: rc.cpp:4895
#, no-c-format
msgid "TDE DocBook Admonitions"
msgstr "TDE DocBook Admonitions"
#. i18n: file extrafiles line 1462
#: rc.cpp:4898
#, no-c-format
msgid "TDE DocBook Tables"
msgstr "TDE DocBook 表格"
#. i18n: file extrafiles line 1523
#: rc.cpp:4901
#, no-c-format
msgid "TDE DocBook Images"
msgstr "TDE DocBook 圖片"
#. i18n: file extrafiles line 1602
#: rc.cpp:4904
#, no-c-format
msgid "TDE DocBook Lists"
msgstr "TDE DocBook 清單"
#. i18n: file extrafiles line 1627
#: rc.cpp:4907
#, no-c-format
msgid "TDE DocBook Standard"
msgstr "TDE DocBook 標準"
#. i18n: file extrafiles line 1703
#: rc.cpp:4910
#, no-c-format
msgid "UI Elements"
msgstr "UI 元素"
#. i18n: file extrafiles line 1779
#: rc.cpp:4913
#, no-c-format
msgid "Tools"
msgstr "工具"
#. i18n: file extrafiles line 1812
#: dialogs/tagdialogs/tagdialog.cpp:192 rc.cpp:4919
#, no-c-format
msgid "Main"
msgstr "主要"
#. i18n: file extrafiles line 1852
#: rc.cpp:4922 rc.cpp:5283
#, no-c-format
msgid "complexType"
msgstr ""
#. i18n: file extrafiles line 1926
#: rc.cpp:4925
#, fuzzy, no-c-format
msgid "Facets"
msgstr "浮動"
#. i18n: file extrafiles line 2000
#: rc.cpp:4928 treeviews/tagattributetree.cpp:295
#, no-c-format
msgid "Attributes"
msgstr "標籤屬性"
#. i18n: file extrafiles line 2024
#: rc.cpp:4931
#, no-c-format
msgid "Misc."
msgstr "其他"
#. i18n: file extrafiles line 2068
#: rc.cpp:4934 rc.cpp:5317
#, fuzzy, no-c-format
msgid "simpleType"
msgstr "Mime 的定義:"
#. i18n: file extrafiles line 2125
#: rc.cpp:4940
#, no-c-format
msgid ""
"<?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?>\n"
"<!DOCTYPE TAGS>\n"
"<TAGS>\n"
"\n"
"</TAGS>\n"
msgstr ""
"<?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?>\n"
"<!DOCTYPE TAGS>\n"
"<TAGS>\n"
"\n"
"</TAGS>\n"
#. i18n: file extrafiles line 2184
#: rc.cpp:4948
#, no-c-format
msgid ""
"<children>\n"
"<child name=&quot;&quot; />\n"
"</children>"
msgstr ""
"<children>\n"
"<child name=&quot;&quot; />\n"
"</children>"
#. i18n: file extrafiles line 2189
#: rc.cpp:4953
#, no-c-format
msgid ""
"<stoppingtags>\n"
"<stoppingtag name=&quot;&quot; />\n"
"</stoppingtags>"
msgstr ""
"<stoppingtags>\n"
"<stoppingtag name=&quot;&quot; />\n"
"</stoppingtags>"
#. i18n: file extrafiles line 2195
#: rc.cpp:4958
#, no-c-format
msgid "forms"
msgstr "表單"
#. i18n: file extrafiles line 2231
#: rc.cpp:4961
#, no-c-format
msgid ""
"The <b>B</b> element suggests that text be rendered as <i>bold text</i>.\n"
" "
msgstr ""
"<b>B</b> 元素使文字以<i>粗體</i>顯示。\n"
" "
#. i18n: file extrafiles line 2234
#: rc.cpp:4965
#, no-c-format
msgid ""
"The <b>B</b> element suggests that text be rendered as <i>emphasized text</i>.\n"
" "
msgstr ""
"<b>B</b> 元素使文字以<i>突顯狀態</i>顯示。\n"
" "
#. i18n: file extrafiles line 2243
#: rc.cpp:4969
#, no-c-format
msgid ""
"The <b>I</b> element suggests that text be rendered as <i>italic text</i>.\n"
" "
msgstr ""
"<b>I</b> 元素使文字以<i>斜體</i>顯示。\n"
" "
#. i18n: file extrafiles line 2248
#: rc.cpp:4973
#, no-c-format
msgid ""
"The <b>U</b> element suggests that text be rendered as <i>underlined text</i>.\n"
" "
msgstr ""
"<b>U</b> 元素使文字顯示時<i>下加底線</i>。\n"
" "
#. i18n: file extrafiles line 2251
#: rc.cpp:4977
#, no-c-format
msgid ""
"The <b>small</b> element suggests that text be rendered as a <i>small font</i>"
".\n"
" "
msgstr ""
"<b>small</b> 元素使文字<i>以縮小字型顯示</i>。\n"
" "
#. i18n: file extrafiles line 2258
#: rc.cpp:4981
#, no-c-format
msgid ""
"The <b>big</b> element suggests that text be rendered as a <i>big font</i>.\n"
" "
msgstr ""
"<b>big</b> 元素使文字<i>以加大字型顯示</i>。\n"
" "
#. i18n: file extrafiles line 2265
#: rc.cpp:4985
#, no-c-format
msgid ""
"The <b>br</b> element forces a <i>break</i> in the current line of text.\n"
" "
msgstr ""
"<b>br</b> 元素使目前的文字<i>折一行</i>。\n"
" "
#. i18n: file extrafiles line 2275
#: rc.cpp:4989
#, no-c-format
msgid ""
"The <b>P</b> element defines a <i>paragraph</i>.\n"
" "
"<br>- ALIGN=[ left | center | right ] (horizontal alignment)\n"
" "
msgstr ""
"<b>P</b> 元素會定義一<i>新段落</i>。\n"
" "
"<br>- ALIGN=[ left | center | right ] (橫向排列)\n"
" "
#. i18n: file extrafiles line 2287
#: rc.cpp:4998
#, no-c-format
msgid "text"
msgstr "文字"
#. i18n: file extrafiles line 2333
#: rc.cpp:5001
#, no-c-format
msgid "deck"
msgstr ""
#. i18n: file extrafiles line 2343
#: rc.cpp:5004 rc.cpp:5216
#, no-c-format
msgid "table"
msgstr "表格"
#. i18n: file extrafiles line 2362
#: rc.cpp:5007
#, no-c-format
msgid "misc."
msgstr "其他"
#. i18n: file extrafiles line 2379
#: rc.cpp:5010
#, no-c-format
msgid ""
"The <b>anchor</b> element denotes an <i>anchor</i>-- a link to formatted text.\n"
" The <b>task</b> within the tag is executed when the link is selected, such "
"as an <i>go</i> task or a <i>refresh</i>.\n"
" "
msgstr ""
#. i18n: file extrafiles line 2383
#: rc.cpp:5015
#, no-c-format
msgid ""
"The <b>a</b> element denotes an <i>anchor</i>--a hypertext link or the "
"destination of a link.\n"
" The <b>HREF</b> attribute specifies a hypertext link to another <i>wml</i> "
"document.\n"
" "
msgstr ""
#. i18n: file extrafiles line 2445
#: rc.cpp:5025
#, fuzzy, no-c-format
msgid "tasks"
msgstr "列:"
#. i18n: file extrafiles line 2460
#: rc.cpp:5028
#, no-c-format
msgid "Debug"
msgstr "除錯"
#: rc.cpp:5029 rc.cpp:5046
msgid "Font..."
msgstr "字型..."
#: rc.cpp:5030 rc.cpp:5047
msgid "Font Size+1"
msgstr "字型大小+1"
#: rc.cpp:5031 rc.cpp:5048
msgid "Font Size-1"
msgstr "字型大小-1"
#: rc.cpp:5032 rc.cpp:5049 rc.cpp:5124
msgid "Pre"
msgstr "Pre"
#: rc.cpp:5033 rc.cpp:5050 rc.cpp:5125
msgid "Subscript"
msgstr "下標"
#: rc.cpp:5034 rc.cpp:5051 rc.cpp:5126
msgid "Superscript"
msgstr "上標"
#: rc.cpp:5035 rc.cpp:5052 rc.cpp:5127
msgid "Head 1 Level"
msgstr "Head 1 Level"
#: rc.cpp:5036 rc.cpp:5053 rc.cpp:5128
msgid "Head 2 Level"
msgstr "Head 2 Level"
#: rc.cpp:5037 rc.cpp:5054 rc.cpp:5129
msgid "Head 3 Level"
msgstr "Head 3 Level"
#: rc.cpp:5038 rc.cpp:5055 rc.cpp:5130
msgid "Head 4 Level"
msgstr "Head 4 Level"
#: rc.cpp:5039 rc.cpp:5056 rc.cpp:5131
msgid "Head 5 Level"
msgstr "Head 5 Level"
#: rc.cpp:5040 rc.cpp:5093
msgid "Unordered List"
msgstr "無順序列表"
#: rc.cpp:5041 rc.cpp:5094
msgid "Ordered List"
msgstr "有順序列表"
#: rc.cpp:5042 rc.cpp:5095
#, fuzzy
msgid "List Item"
msgstr "列出形式的圖片"
#: rc.cpp:5043 rc.cpp:5096
msgid "Definition List"
msgstr ""
#: rc.cpp:5044 rc.cpp:5097
msgid "Definition Term"
msgstr ""
#: rc.cpp:5045 rc.cpp:5098
#, fuzzy
msgid "Definition"
msgstr "列印到目的地"
#: rc.cpp:5057 rc.cpp:5099 rc.cpp:5192 utility/tagactionset.cpp:333
msgid "Table"
msgstr "表格"
#: rc.cpp:5058 rc.cpp:5100
msgid "Table Row (with dialog)"
msgstr "表格列(對話盒顯示)"
#: rc.cpp:5059 rc.cpp:5101
msgid "Table Body (with dialog)"
msgstr "表格身部 Body (對話盒顯示)"
#: rc.cpp:5060 rc.cpp:5102
msgid "Table Head (with dialog)"
msgstr "表格頭部 (對話盒顯示)"
#: rc.cpp:5061 rc.cpp:5103
msgid "Table Data (with dialog)"
msgstr "表格資料 (對話盒顯示)"
#: rc.cpp:5062 rc.cpp:5104
msgid "Table Body"
msgstr "表格身部"
#: rc.cpp:5063 rc.cpp:5105
msgid "Table Head"
msgstr "表格頭部"
#: rc.cpp:5064 rc.cpp:5106
msgid "Table Row"
msgstr "表格列"
#: rc.cpp:5065 rc.cpp:5107
msgid "Table Data"
msgstr "表格資料"
#: rc.cpp:5066 rc.cpp:5108
msgid "Caption"
msgstr "表格標題"
#: rc.cpp:5067 rc.cpp:5109
msgid "Form"
msgstr "表單"
#: rc.cpp:5068 rc.cpp:5110
msgid "Select"
msgstr "選擇表單"
#: rc.cpp:5069 rc.cpp:5112
msgid "Check Button"
msgstr ""
#: rc.cpp:5070 rc.cpp:5113
#, fuzzy
msgid "Radio Button"
msgstr "右鍵"
#: rc.cpp:5071 rc.cpp:5115
msgid "Text Area"
msgstr "文字區域"
#: rc.cpp:5072 rc.cpp:5116
msgid "Input Password"
msgstr "密碼輸入區域"
#: rc.cpp:5073 rc.cpp:5117
msgid "Input Text"
msgstr "文字輸入區域"
#: rc.cpp:5074 rc.cpp:5120
msgid "Submit"
msgstr "提交按鈕"
#: rc.cpp:5077
msgid "Bold"
msgstr "粗體"
#: rc.cpp:5079 rc.cpp:5135 rc.cpp:5151
msgid "Underline"
msgstr "加底線"
#: rc.cpp:5080 rc.cpp:5136 rc.cpp:5152
msgid "New Line"
msgstr "換行"
#: rc.cpp:5081 rc.cpp:5137 rc.cpp:5153
msgid "Paragraph"
msgstr "新段落"
#: rc.cpp:5082 rc.cpp:5138 rc.cpp:5154
msgid "Non Breaking Space"
msgstr "非中斷空格"
#: rc.cpp:5083 rc.cpp:5139 rc.cpp:5155 rc.cpp:5185
msgid "Anchor..."
msgstr "超連結..."
#: rc.cpp:5084 rc.cpp:5140 rc.cpp:5156
msgid "Image..."
msgstr "影像..."
#: rc.cpp:5085 rc.cpp:5141 rc.cpp:5157
msgid "Horizontal Line"
msgstr "橫線"
#: rc.cpp:5087 rc.cpp:5143
msgid "Align Left"
msgstr "靠左對齊"
#: rc.cpp:5088 rc.cpp:5144
msgid "Align Center"
msgstr "置中"
#: rc.cpp:5089 rc.cpp:5145
msgid "Align Right"
msgstr "靠右對齊"
#: rc.cpp:5090 rc.cpp:5146
msgid "Align Justify"
msgstr "分散對齊"
#: rc.cpp:5091 rc.cpp:5164
msgid "Time"
msgstr "目前時間"
#: rc.cpp:5111
#, fuzzy
msgid "Option"
msgstr "動作"
#: rc.cpp:5114 rc.cpp:5170
msgid "Button"
msgstr "按鈕"
#: rc.cpp:5118
msgid "Fieldset"
msgstr "Fieldset"
#: rc.cpp:5119
msgid "Legend"
msgstr "Legend"
#: rc.cpp:5122 rc.cpp:5147 rc.cpp:5163
msgid "Span"
msgstr "Span"
#: rc.cpp:5123
msgid "Div"
msgstr "Div"
#: rc.cpp:5132 rc.cpp:5148
msgid "Quick Start Dialog"
msgstr "快速開始對話盒"
#: rc.cpp:5165 rc.cpp:5350
msgid "Meta"
msgstr "Meta"
#: rc.cpp:5166
msgid "Base"
msgstr "Base"
#: parts/kafka/wkafkapart.cpp:71 rc.cpp:5168
msgid "Link"
msgstr "連結"
#: rc.cpp:5169
msgid "Application Name"
msgstr "應用程式名稱"
#: rc.cpp:5172
#, fuzzy
msgid "Label"
msgstr "變數"
#: rc.cpp:5173
msgid "Menu"
msgstr "選單"
#: rc.cpp:5174
msgid "menu item"
msgstr "選單項目"
#: rc.cpp:5175
msgid "Sub menu"
msgstr "子選單"
#: rc.cpp:5178 rc.cpp:5214 rc.cpp:5247 rc.cpp:5255
msgid "para"
msgstr "para"
#: rc.cpp:5180 rc.cpp:5208
msgid "note"
msgstr "note"
#: rc.cpp:5181 rc.cpp:5249
msgid "sect1"
msgstr "sect1"
#: rc.cpp:5182 rc.cpp:5250
msgid "sect2"
msgstr "sect2"
#: rc.cpp:5183 rc.cpp:5251
msgid "sect3"
msgstr "sect3"
#: rc.cpp:5184 rc.cpp:5252
msgid "sect4"
msgstr "sect4"
#: rc.cpp:5186
msgid "Web Link"
msgstr "網頁連結"
#: rc.cpp:5188
#, fuzzy
msgid "programlisting"
msgstr "拼字"
#: rc.cpp:5189
msgid "List"
msgstr "列表"
#: rc.cpp:5190 rc.cpp:5324
msgid "Items"
msgstr "項目"
#: rc.cpp:5191
msgid "Emphasis"
msgstr ""
#: rc.cpp:5193
msgid "amp"
msgstr "amp"
#: rc.cpp:5194
msgid "CDATA"
msgstr "CDATA"
#: rc.cpp:5195
msgid "XML Validator"
msgstr "XML 檢驗器"
#: rc.cpp:5196
msgid "XSLT Processor"
msgstr "XSLT 處理器"
#: rc.cpp:5197
msgid "Class Name"
msgstr "類別名稱"
#: rc.cpp:5198
msgid "Metod Name"
msgstr "Metod 名稱"
#: components/debugger/backtracelistview.cpp:61
#: components/debugger/debuggerbreakpointview.cpp:62 rc.cpp:5199
#, fuzzy
msgid "Function"
msgstr "動作"
#: rc.cpp:5201
msgid "Var Name"
msgstr "變數名稱"
#: rc.cpp:5202
msgid "Command Line"
msgstr "指令列"
#: rc.cpp:5203
msgid "Parameter"
msgstr "參數"
#: rc.cpp:5204
msgid "Prompt"
msgstr ""
#: rc.cpp:5205
msgid "warning"
msgstr "警告"
#: rc.cpp:5206
msgid "caution"
msgstr "注意"
#: rc.cpp:5207
msgid "important"
msgstr ""
#: rc.cpp:5209
#, fuzzy
msgid "tip"
msgstr "停止(&t)"
#: rc.cpp:5210
msgid "footnote"
msgstr ""
#: rc.cpp:5211
msgid "footnoteref"
msgstr ""
#: rc.cpp:5212
msgid "example"
msgstr "例子"
#: rc.cpp:5213
msgid "informalexample"
msgstr ""
#: rc.cpp:5215
msgid "Table Wizard"
msgstr "表格精靈"
#: rc.cpp:5217 rc.cpp:5254
msgid "title"
msgstr "標題"
#: rc.cpp:5218
#, fuzzy
msgid "informaltable"
msgstr "一般"
#: rc.cpp:5219
#, fuzzy
msgid "tgroup"
msgstr "工具提示:"
#: rc.cpp:5220
#, fuzzy
msgid "thead"
msgstr "就緒"
#: rc.cpp:5221
#, fuzzy
msgid "tbody"
msgstr "粗體"
#: rc.cpp:5222
#, fuzzy
msgid "row"
msgstr "瀏覽"
#: rc.cpp:5223
#, fuzzy
msgid "entry"
msgstr "Identifier"
#: rc.cpp:5224
msgid "Image Wizard"
msgstr "圖片精靈"
#: rc.cpp:5225
msgid "screenshot"
msgstr "抓圖"
#: rc.cpp:5226
msgid "screeninfo"
msgstr ""
#: rc.cpp:5227
msgid "mediaobject"
msgstr ""
#: rc.cpp:5228
msgid "inlinemediaobject"
msgstr ""
#: rc.cpp:5229
msgid "imageobject"
msgstr ""
#: rc.cpp:5230
msgid "imagedata"
msgstr ""
#: rc.cpp:5231
msgid "textobject"
msgstr ""
#: rc.cpp:5232
#, fuzzy
msgid "phrase"
msgstr "使用者名稱"
#: rc.cpp:5233
msgid "caption"
msgstr "標題"
#: rc.cpp:5234
msgid "List Wizard"
msgstr "列表精靈"
#: rc.cpp:5235
#, fuzzy
msgid "orderedlist"
msgstr "無排序"
#: rc.cpp:5236
msgid "itemizedlist"
msgstr ""
#: rc.cpp:5237
msgid "listitem"
msgstr ""
#: rc.cpp:5238
msgid "variablelist"
msgstr "變數清單"
#: rc.cpp:5239
msgid "varlistentry"
msgstr "變數項目"
#: rc.cpp:5240
#, fuzzy
msgid "term"
msgstr "項目:"
#: rc.cpp:5241
msgid "varlistitem"
msgstr "變數清單項目"
#: rc.cpp:5242
msgid "procedure"
msgstr ""
#: rc.cpp:5243
#, fuzzy
msgid "step"
msgstr "停止(&t)"
#: rc.cpp:5244
msgid "substeps"
msgstr ""
#: rc.cpp:5245
#, fuzzy
msgid "simplelist"
msgstr "檔案(&F):"
#: rc.cpp:5246
msgid "member"
msgstr ""
#: rc.cpp:5248
#, fuzzy
msgid "chapter"
msgstr "Identifier"
#: rc.cpp:5253
msgid "sect5"
msgstr "sect5"
#: rc.cpp:5256
#, fuzzy
msgid "anchor"
msgstr "搜尋(&S)"
#: rc.cpp:5257
msgid "xref"
msgstr ""
#: rc.cpp:5258
#, fuzzy
msgid "link"
msgstr "列表"
#: rc.cpp:5259
#, fuzzy
msgid "ulink"
msgstr "列表"
#: rc.cpp:5260
msgid "email"
msgstr "電子郵件"
#: rc.cpp:5261
msgid "guilabel"
msgstr ""
#: rc.cpp:5262
#, fuzzy
msgid "guibutton"
msgstr "右鍵"
#: rc.cpp:5263
msgid "guiicon"
msgstr ""
#: rc.cpp:5264
msgid "menuchoice"
msgstr ""
#: rc.cpp:5265
msgid "shortcut"
msgstr ""
#: rc.cpp:5266
#, fuzzy
msgid "guimenu"
msgstr "可選擇的參數"
#: rc.cpp:5267
#, fuzzy
msgid "guimenuitem"
msgstr "可選擇的參數"
#: rc.cpp:5268
msgid "guisubmenu"
msgstr ""
#: rc.cpp:5269
msgid "keycombo"
msgstr ""
#: rc.cpp:5270
msgid "keycap"
msgstr ""
#: rc.cpp:5271
#, fuzzy
msgid "action"
msgstr "動作"
#: rc.cpp:5272
#, fuzzy
msgid "meinproc"
msgstr "本地端目錄"
#: rc.cpp:5273
msgid "checkXML"
msgstr ""
#: rc.cpp:5274
msgid "annotation"
msgstr "附註"
#: rc.cpp:5275
msgid "appInfo"
msgstr ""
#: rc.cpp:5276
#, fuzzy
msgid "documentation"
msgstr "文件"
#: rc.cpp:5277
msgid "schema"
msgstr ""
#: rc.cpp:5278
#, fuzzy
msgid "element"
msgstr "選擇"
#: rc.cpp:5279
msgid "import"
msgstr ""
#: rc.cpp:5280
#, fuzzy
msgid "include"
msgstr "搜尋"
#: rc.cpp:5281
#, fuzzy
msgid "notation"
msgstr "動作"
#: rc.cpp:5282
msgid "redefine"
msgstr ""
#: rc.cpp:5284
#, fuzzy
msgid "complexContent"
msgstr "專案名稱"
#: rc.cpp:5285
#, fuzzy
msgid "simpleContent"
msgstr "專案名稱"
#: rc.cpp:5286
#, fuzzy
msgid "all"
msgstr "電子郵件"
#: rc.cpp:5287
#, fuzzy
msgid "choice"
msgstr "選擇"
#: rc.cpp:5288 rc.cpp:5312
#, fuzzy
msgid "group"
msgstr "工具提示:"
#: rc.cpp:5289
msgid "sequence"
msgstr ""
#: rc.cpp:5290 rc.cpp:5308
#, fuzzy
msgid "attribute"
msgstr "標籤的屬性(&A)"
#: rc.cpp:5291 rc.cpp:5309
#, fuzzy
msgid "attributeGroup"
msgstr "標籤的屬性(&A)"
#: rc.cpp:5292 rc.cpp:5307
#, fuzzy
msgid "anyAttribute"
msgstr "標籤的屬性(&A)"
#: rc.cpp:5293 rc.cpp:5318
#, fuzzy
msgid "restriction"
msgstr "列印到目的地"
#: rc.cpp:5294
#, fuzzy
msgid "extension"
msgstr "副檔名:"
#: rc.cpp:5295
#, fuzzy
msgid "enumeration"
msgstr "專案的選項"
#: rc.cpp:5296
#, fuzzy
msgid "pattern"
msgstr "樣式(&P):"
#: rc.cpp:5297
msgid "totalDigits"
msgstr ""
#: rc.cpp:5298
msgid "fractionDigits"
msgstr ""
#: rc.cpp:5299
#, fuzzy
msgid "length"
msgstr "選擇"
#: rc.cpp:5300
msgid "maxLength"
msgstr ""
#: rc.cpp:5301
msgid "minLength"
msgstr ""
#: rc.cpp:5302
#, fuzzy
msgid "maxInclusive"
msgstr "迴遞(&R)"
#: rc.cpp:5303
#, fuzzy
msgid "minInclusive"
msgstr "迴遞(&R)"
#: rc.cpp:5304
#, fuzzy
msgid "maxExclusive"
msgstr "迴遞(&R)"
#: rc.cpp:5305
#, fuzzy
msgid "minExclusive"
msgstr "迴遞(&R)"
#: rc.cpp:5306
msgid "whiteSpace"
msgstr "空白"
#: rc.cpp:5310
#, fuzzy
msgid "any"
msgstr "Quanta"
#: rc.cpp:5311
#, fuzzy
msgid "field"
msgstr "修改過"
#: rc.cpp:5313
msgid "key"
msgstr ""
#: rc.cpp:5314
msgid "keyref"
msgstr ""
#: rc.cpp:5315
msgid "selector"
msgstr "選擇器"
#: rc.cpp:5316
msgid "unique"
msgstr ""
#: rc.cpp:5319
msgid "list"
msgstr "列表"
#: rc.cpp:5320
#, fuzzy
msgid "union"
msgstr "動作"
#: rc.cpp:5321
#, fuzzy
msgid "New Tag file"
msgstr "大小"
#: rc.cpp:5325
msgid "Item"
msgstr "項目"
#: rc.cpp:5331
msgid "Children"
msgstr ""
#: rc.cpp:5332
#, fuzzy
msgid "Stoppingtags"
msgstr "字串"
#: rc.cpp:5334
msgid "Input Text (wml)"
msgstr ""
#: rc.cpp:5336
msgid "Option Group (wml)"
msgstr ""
#: rc.cpp:5337
msgid "Bold (wml)"
msgstr "粗體 (wml)"
#: rc.cpp:5339
msgid "Italic (wml)"
msgstr "斜體 (wml)"
#: rc.cpp:5340
msgid "Underline (wml)"
msgstr "加底線(wml)"
#: rc.cpp:5341
msgid "Small (wml)"
msgstr "小 (wml)"
#: rc.cpp:5342
msgid "Big (wml)"
msgstr "大 (wml)"
#: rc.cpp:5344
msgid "Paragraph (wml)"
msgstr ""
#: rc.cpp:5346
msgid "Access (wml)"
msgstr ""
#: rc.cpp:5347
msgid "WML"
msgstr "WML"
#: rc.cpp:5348
#, fuzzy
msgid "Card"
msgstr "字元"
#: rc.cpp:5349
#, fuzzy
msgid "Head"
msgstr "列數"
#: rc.cpp:5351
msgid "Table (wml)"
msgstr "表格 (wml)"
#: rc.cpp:5352
msgid "Table Row (wml)"
msgstr "表格列 (wml)"
#: rc.cpp:5353
msgid "Table Data (wml)"
msgstr "表格資料 (wml)"
#: rc.cpp:5354
msgid "Anchor...(wml)"
msgstr "超連結...(wml)"
#: rc.cpp:5355
msgid "A...(wml)"
msgstr "A...(wml)"
#: rc.cpp:5356
msgid "Image...(wml)"
msgstr "圖片...(wml)"
#: rc.cpp:5357
msgid "Timer (wml)"
msgstr ""
#: rc.cpp:5358
msgid "Set variable"
msgstr "設定變數"
#: rc.cpp:5359
#, fuzzy
msgid "Post Field"
msgstr "上傳專案檔案"
#: rc.cpp:5360
msgid "Go (wml)"
msgstr "前往 (wml)"
#: rc.cpp:5361
msgid "No operation (wml)"
msgstr ""
#: rc.cpp:5362
#, fuzzy
msgid "Previous (wml)"
msgstr "上一個檔案(&P)"
#: rc.cpp:5364
msgid "Do (wml)"
msgstr ""
#: rc.cpp:5365
msgid "Onevent (wml)"
msgstr ""
#: rc.cpp:5366
#, fuzzy
msgid "HTML &Tidy Syntax Checking"
msgstr "HTML &amp;Tidy 語法檢查"
#: rc.cpp:5367
#, fuzzy
msgid "&Kompare"
msgstr "&amp;Kompare"
#: rc.cpp:5368
#, fuzzy
msgid "View with &Opera"
msgstr "使用 &amp;Opera 預覽"
#: rc.cpp:5369
#, fuzzy
msgid "View with Mo&zilla"
msgstr "使用 Mo&amp;zilla 預覽"
#: rc.cpp:5370
#, fuzzy
msgid "View with &Firefox"
msgstr "使用 &amp;Firefox 預覽"
#: rc.cpp:5371
#, fuzzy
msgid "View with &Netscape"
msgstr "使用 &amp;Netscape 預覽"
#: tips.cpp:3
msgid ""
"<p>...that you can use ftp for file operations by using\n"
"<b>ftp://user@domain/path</b> in the file dialog? It will prompt you for your "
"password.\n"
"</p>\n"
msgstr ""
#: tips.cpp:10
msgid ""
"<p>...that you can use SSH/SCP for file operations by using\n"
"<b>fish://user@domain/path</b> in the file dialog? It will prompt you for your "
"password.\n"
"</p>\n"
msgstr ""
#: tips.cpp:17
msgid ""
"<p>...that you can view and manage the content of any \n"
"<b>project upload profile</b> in the in a tree in the right side dock? Dragging "
"files from the upload profile to the project tree in the left dock will also "
"prompt asking if you want to add them to the project if they are new.\n"
"</p>\n"
msgstr ""
#: tips.cpp:24
msgid ""
"<p>...that you can turn on line numbering and the icon border\n"
"by default from <b>Settings &gt; Configure Editor::Defaults</b>?\n"
"</p>\n"
msgstr ""
#: tips.cpp:31
msgid ""
"<p>...that you can create actions that will run scripts from\n"
"<b>Settings &gt; Configure Actions</b> and place them on the toolbar? You can "
"even assign hot keys to them.\n"
"</p>\n"
msgstr ""
#: tips.cpp:38
msgid ""
"<p>...that you can create custom toolbars and even make them project\n"
"specific? You can customize any of Quanta's toolbars too.\n"
"</p>\n"
msgstr ""
#: tips.cpp:45
msgid ""
"<p>...that you can create remote projects and manage them with the\n"
"<b>kio slave of your choice</b>? Look in the project settings dialog.\n"
"</p>\n"
msgstr ""
#: tips.cpp:52
msgid ""
"<p>...that you can open and close groups of files in projects with\n"
"<b>Project Views</b>? You can even include project toolbars in the views. The "
"new project toolbar makes it easy.\n"
"</p>\n"
msgstr ""
#: tips.cpp:59
msgid ""
"<p>...that you can have as many <b>upload profiles</b> "
"as you want for a project? This means you can have a separate test server and "
"production server and Quanta will keep track of what is uploaded where.\n"
"</p>\n"
msgstr ""
#: tips.cpp:65
msgid ""
"<p>...that you can view a summary of PHP classes, functions and variables\n"
"in the structure tree with <b>RMB Show Groups For &gt; PHP</b>?\n"
"</p>\n"
msgstr ""
#: tips.cpp:72
msgid ""
"<p>...that you can use auto-complete with PHP's built in functions by using <b>"
"Ctrl+Space</b>?\n"
"</p>\n"
msgstr ""
#: tips.cpp:78
msgid ""
"<p>...that you can turn on/off autoupdating of closing tags in\n"
"<b>Settings &gt; Configure Quanta::Tag Style</b>?\n"
msgstr ""
#: tips.cpp:84
msgid ""
"<p>...that you can cause Quanta to open files from Konqueror into the\n"
"currently open window by adding a <b>--unique</b> switch to your .desktop\n"
"file or menu entry? It would look like this: '[path/]quanta --unique'.\n"
"</p>\n"
msgstr ""
#: tips.cpp:92
msgid ""
"<p>...that you can add a keyboard shortcut for any action you define?\n"
"Just go to <b>Settings > Configure Shortcuts</b>.\n"
"</p>\n"
msgstr ""
#: tips.cpp:99
msgid ""
"<p>...that you can add new local and remote top level folders to the Files "
"Tree? Use <b>RMB New Top Folder...</b> and select a local folder or enter the "
"remote server name in form of <i>ftp://user@server</i> "
"and select the remote folder.\n"
"</p>\n"
msgstr ""
#: tips.cpp:105
msgid ""
"<p>...that there is a <b>README</b> file with useful information?\n"
"</p>\n"
msgstr ""
#: tips.cpp:111
msgid ""
"<p>...that we have a mailing list for Quanta users at <b>"
"<a href=\"http://mail.kde.org/mailman/listinfo/quanta\">"
"http://mail.kde.org/mailman/listinfo/quanta</a></b>? This is a great place to "
"go for help and information. Please join before posting, even if you read from "
"a newsreader. You can set it not to send you mail and this is how we prevent "
"spam.\n"
"</p>\n"
msgstr ""
#: tips.cpp:117
msgid ""
"<p>...that you can search the Quanta mailing list using <b>"
"<a "
"href=\"http://www.google.com/custom?hl=en&lr=&ie=ISO-8859-1&safe=off&cof=&sitese"
"arch=http%3A%2F%2Fmail.kde.org&q=&btnG=Google+Search\">Google</a></b>? \n"
"</p>\n"
msgstr ""
#: tips.cpp:123
msgid ""
"<p>...that we have additional mailing lists to support our users? Lists include "
"Kommander and web development help.<b><a "
"href=\"http://mail.tdewebdev.org/mailman/listinfo\">Click here to see</a></b>.\n"
"</p>\n"
msgstr ""
#: tips.cpp:129
msgid ""
"<p>...that you can help to financially support our program of sponsoring "
"developers? <b><a href=\"http://tdewebdev.org/donate.php\">"
"Click here to help</a></b>.\n"
"</p>\n"
msgstr ""
#: tips.cpp:135
msgid ""
"<p>...that you can set a project root below your document root and then upload "
"database password files and libraries where they can only be accessed by your "
"user account.\n"
"</p>\n"
msgstr ""
#: tips.cpp:141
msgid ""
"<p>...that you can use Quanta to enable new DTDs using our <b>tagxml DTD</b>"
"? Quanta can even import a DTD for you.\n"
"</p>\n"
msgstr ""
#: tips.cpp:147
msgid ""
"<p>...that you can now edit and create Quanta <b>Document Type Editing "
"Packages</b> from a dialog? Use DTD>Edit DTD settings to access this.\n"
"</p>\n"
msgstr ""
#: tips.cpp:153
msgid ""
"<p>...that you can use <b>Kommander</b> to create custom dialogs for Quanta? "
"Open the editor with <i>kmdr-editor</i> or run a dialog with <i>"
"kmdr-executor mydialog.kmdr</i>.\n"
"</p>\n"
msgstr ""
#: tips.cpp:159
msgid ""
"<p>...that <b>bookmarks are now saved</b>?\n"
"</p>\n"
msgstr ""
#: tips.cpp:165
msgid ""
"<p>...that Quanta has a visual <b>problem reporter</b> "
"for your current DTD? Switch to the <b>Structure Tree</b> "
"and make the problem description widget visible with <b>"
"View &gt; Show Problem Reporter</b>.\n"
"</p>\n"
msgstr ""
#: tips.cpp:171
msgid ""
"<p>...that you can save <b>file descriptions</b> that appear in the project "
"tree? Right click on a project file, select <i>Properties</i> and go to the <i>"
"Quanta File Info</i> tab.\n"
"</p>\n"
msgstr ""
#: tips.cpp:177
msgid ""
"<p>...that you can set the <b>Upload Status</b> of files and folders in the "
"project tree? Right click on a project file or folder and select <i>"
"Upload Status</i> and set the appropriate actions. This enables you to set a "
"project root below the document root and prevent support files from uploading "
"while requiring confirmation on sensitive data files.\n"
"</p>\n"
msgstr ""
#: tips.cpp:183
msgid ""
"<p>...that you can set the file tabs to one of three modes for close buttons? "
"You can set them to never, always or delay/hover in <b>"
"Settings &gt; Configure Quanta::User Interface</b>.\n"
"</p>\n"
msgstr ""
#: tips.cpp:189
msgid ""
"<p>...that you can move the file tabs now? <b>Hold the middle mouse button on a "
"tab and drag it where you want it.</b>.\n"
"</p>\n"
msgstr ""
#: tips.cpp:195
msgid ""
"<p>...that the file tabs now have popup menus? <b>RMB on a file tab</b> "
"and you can even select which open file to view from a menu list.\n"
"</p>\n"
msgstr ""
#: tips.cpp:201
msgid ""
"<p>...that Quanta can convert <b>tag and attribute case</b> "
"for you? It's on the Tools menu.\n"
"</p>\n"
msgstr ""
#: tips.cpp:207
msgid ""
"<p>...that Quanta comes with a number of applications that run a plug ins? "
"Quanta can also load other programs if they are installed including HTML Tidy, "
"Cervisia and Kompare. Make sure you have HTML Tidy and the tdesdk module "
"installed to use them all.\n"
"</p>\n"
msgstr ""
#: tips.cpp:213
msgid ""
"<p>...that you can use Cervisia to manage CVS from inside Quanta? <b>"
"Click on the Cervisia icon</b> and it will load up the current project "
"directory (if it is CVS). If you have never used CVS before Cervisia has great "
"help files and setting up a local repository is easy.\n"
"</p>\n"
msgstr ""
#: tips.cpp:219
msgid ""
"<p>...that common CVS commands are available in the project context menu inside "
"Quanta? <b>Open the project tree and right click on a file or folder.</b> "
"This functionality uses the DCOP services of Cervisia so you must have it "
"installed. It will also support any versioning system supported by Cervisia.\n"
"</p>\n"
msgstr ""
#: tips.cpp:225
msgid ""
"<p>...that you can use KFileReplace to find and replace across your entire "
"project? <b>Click on the KFileReplace button</b> and you can set extensive "
"configurations, use multi line values and wild cards, and even go to the files "
"found in Quanta.\n"
"</p>\n"
msgstr ""
#: tips.cpp:231
msgid ""
"<p>...that you can create image maps easily with Quanta? <b>"
"Select KImageMapEditor from the Plugins menu</b> and you have estensive options "
"at your fingertips.\n"
"</p>\n"
msgstr ""
#: tips.cpp:237
msgid ""
"<p>...that you can debug XSL from within Quanta? <b>"
"Click on the XSL icon for KXSL Dbg</b> and Quanta will load an interactive XSL "
"debugger.\n"
"</p>\n"
msgstr ""
#: tips.cpp:243
msgid ""
"<p>...that you can visually check the status of your links from within Quanta? "
"<b>Select KLinkStatus from the Plugins menu</b> and Quanta will load a visual "
"link checker.\n"
"</p>\n"
msgstr ""
#: tips.cpp:249
msgid ""
"<p>...that you can view the HTML source when using project preview with PHP (or "
"other server side scripting) in Quanta? <b>right click on a preview and select "
"View Document Source</b> and Quanta will load a tab with the rendered HTML.\n"
"</p>\n"
msgstr ""
#: tips.cpp:255
msgid ""
"<p>...that Quanta has XML tools for things like XSL Transforms? <b>"
"Select the scripts tree on the left</b> and you will find several Kommander "
"dialogs that use your installed libxml libraries.\n"
"</p>\n"
msgstr ""
#: tips.cpp:261
msgid ""
"<p>...that Quanta has a local script library for useful scripts? <b>"
"Select the scripts tree on the left</b> and you will find scripts and Kommander "
"dialogs for doc generation, Quick Start, XSL Transforms and more.\n"
"</p>\n"
msgstr ""
#: tips.cpp:267
msgid ""
"<p>...that you can create the XML files used to display information about "
"scripts in the Script tree? <b>Select the scripts tree on the left</b> "
"and you will find scriptinfo.kmdr. Right click and select <i>Run Script</i> "
"and fill in the dialog.\n"
"</p>\n"
msgstr ""
#: tips.cpp:273
msgid ""
"<p>...that you can create text templates using <b>Drag and Drop </b>"
"? Have your template tree open, select some text, drag it to the tree and drop "
"it on a folder. Quanta will prompt you for a file name.\n"
"</p>\n"
msgstr ""
#: tips.cpp:279
msgid ""
"<p>...that you can create <b>filter actions for templates</b>"
"? Right click on a template in the tree and select properties, Quanta Templates "
"and a filtering action, which is a script from the scripts tree. This can take "
"the template and filter it.\n"
"</p>\n"
msgstr ""
#: tips.cpp:285
msgid ""
"<p>...that Quanta has <b>four types of templates</b>"
"? There are document (page), text snippet, binary (linked files) and site (tgz "
"files holding entire trees) templates. These all go in folders for each type.\n"
"</p>\n"
msgstr ""
#: tips.cpp:291
msgid ""
"<p>...that Quanta has a deeply <b>integrated PHP debugger</b>"
"? you can enable it from your <i>Project Settings</i>.\n"
"</p>\n"
msgstr ""
#: tips.cpp:297
msgid ""
"<p>...that Quanta now has <b>Team Project</b> capabilities? You can share "
"information about roles, subprojects and tasks. This integrates with Quanta's "
"new <b>Event Actions</b>. See the <i>Project Properties</i> dialog.\n"
"</p>\n"
msgstr ""
#: tips.cpp:303
msgid ""
"<p>...that Quanta supports attaching scripts to events with <b>Event Actions</b> "
"in your projects? You can share information about roles, subprojects and tasks. "
"This integrates with Quanta's new <b>Event Actions</b>. See the <i>"
"Project Properties</i> dialog.\n"
"</p>\n"
msgstr ""
#: tips.cpp:309
msgid ""
"<p>...that Quanta now has a <b>public repository</b> "
"for all resources? Quanta uses <i>KNewStuff</i> to make templates, scripts, "
"DTEPs, toolbars and more available for download. Need something? Check the "
"download menu items.\n"
"</p>\n"
msgstr ""
#: tips.cpp:315
msgid ""
"<p>...that you can contribute to <b>Quanta's public repository</b> "
"of resources? Just <a "
"href=\"mailto:submissions@tdewebdev.org?subject=Quanta%20Resource\">"
"email it here</a>.\n"
"</p>\n"
msgstr ""
#: src/quanta.cpp:226
msgid "Quanta data files were not found."
msgstr "找不到 Quanta 的資料檔案。"
#: src/quanta.cpp:227
msgid ""
"You may have forgotten to run \"make install\", or your TDEDIR, TDEDIRS or PATH "
"are not set correctly."
msgstr "您可能忘記了執行 \"make install\",或環境變數 TDEDIR, TDEDIRS 或 PATH 不正確。"
#: src/quanta.cpp:366 treeviews/structtreeview.cpp:113
msgid "Open File"
msgstr "開啟檔案"
#: src/quanta.cpp:378 src/quanta.cpp:2090 treeviews/structtreeview.cpp:1008
msgid ""
"<qt>The file <b>%1</b> does not exist or is not a recognized mime type.</qt>"
msgstr "<qt>檔案 <b>%1</b> 不存在或它的 MIME 類型無法被識別。</qt>"
#: src/quanta.cpp:415
msgid ""
"The file %1 does not exist.\n"
" Do you want to remove it from the list?"
msgstr ""
"檔案 %1 不存在。\n"
" 您要從清單移除它嗎?"
#: project/project.cpp:265 src/quanta.cpp:415
msgid "Keep"
msgstr "保留"
#: src/quanta.cpp:520
msgid "Save File"
msgstr "儲存檔案"
#: src/quanta.cpp:526
msgid "<qt>Do you want to add the<br><b>%1</b><br>file to project?</qt>"
msgstr "<qt>您要把<br><b>%1</b><br>檔案加入到專案中嗎?</qt>"
#: components/cvsservice/cvsservice.cpp:333 src/quanta.cpp:526
#: utility/quantanetaccess.cpp:185
msgid "Do Not Add"
msgstr "不要加入"
#: src/quanta.cpp:587
#, c-format
msgid ""
"You must save the templates in the following folder: \n"
"\n"
"%1"
msgstr ""
"您需要把範本儲存到下面的目錄裏:\n"
"\n"
"%1"
#: src/quanta.cpp:606
msgid ""
"<qt>There was an error while creating the template file."
"<br>Check that you have write access to <i>%1</i>.</qt>"
msgstr "<qt>建立範本檔案時發生錯誤。<br>請確定您對 <i>%1</i> 擁有寫入權限。</qt>"
#: src/quanta.cpp:606 treeviews/basetreeview.cpp:1187
msgid "Template Creation Error"
msgstr "範本建立錯誤"
#: src/quanta.cpp:785
msgid "<center><h3>The current document is empty...</h3></center>"
msgstr "<center><h3>目前的文件是空白的...</h3></center>"
#: src/quanta.cpp:933
msgid " OVR "
msgstr " 覆寫 "
#: src/quanta.cpp:933
msgid " INS "
msgstr " 插入 "
#: src/quanta.cpp:937 src/quanta.cpp:1516
msgid " R/O "
msgstr " 唯讀 "
#: src/quanta.cpp:1061 src/quanta.cpp:1114 src/quanta_init.cpp:247
msgid "&Window"
msgstr "視窗(&W)"
#: src/quanta.cpp:1152
msgid ""
"Changes made in the preview configuration dialog are global and have effect on "
"every application using the KHTML part to display web pages, including "
"Konqueror."
msgstr "預覽對話盒的設定是全域性的。所有使用 KHTML part 顯示網頁的應用程式都會受到影響,包括 Konqueror。"
#: src/quanta.cpp:1159
msgid "Configure Quanta"
msgstr "設定 Quanta"
#: src/quanta.cpp:1164
msgid "Tag Style"
msgstr "標籤風格"
#: src/quanta.cpp:1178
msgid "Environment"
msgstr "環境"
#: src/quanta.cpp:1218
msgid "User Interface"
msgstr "用戶介面"
#: src/main.cpp:141 src/quanta.cpp:1241
msgid "VPL View"
msgstr "VPL 預覽"
#: src/quanta.cpp:1244
msgid "Parser"
msgstr "解析器"
#: src/quanta.cpp:1514 src/quanta.cpp:1542
msgid "Line: %1 Col: %2"
msgstr "行: %1 字: %2"
#: src/quanta.cpp:1971
#, c-format
msgid "Open File: %1"
msgstr "開啟檔案:%1"
#: src/quanta.cpp:1975 src/quanta_init.cpp:938
msgid "Open File: none"
msgstr "開啟檔案: 無"
#: src/quanta.cpp:2030
msgid "Add Watch: '%1'"
msgstr "加入監視器:'%1'"
#: src/quanta.cpp:2041
msgid "Set Value of '%1'"
msgstr "設定'%1'的數值"
#: src/quanta.cpp:2052
msgid "Break When '%1'..."
msgstr "當'%1'發生時中斷..."
#: src/quanta.cpp:2140
msgid ""
"Cannot load the toolbars from the archive.\n"
"Check that the filenames inside the archives begin with the archive name."
msgstr ""
"無法從壓縮包中載入工具列。\n"
"請確定壓縮包內的檔案名稱與壓縮包前檔名(不包括它本身的副檔名)一樣。"
#: src/quanta.cpp:2463
msgid ""
"<qt>An error happened while saving the <b>%1</b> toolbar."
"<br>Check that you have write permissions for"
"<br><b>%2</b>."
"<br>"
"<br>This might happen if you tried save to save a global toolbar as a simple "
"user. Use <i>Save As</i> or <i>Toolbars->Save Toolbars->"
"Save as Local Toolbar</i> in this case. </qt>"
msgstr ""
#: src/quanta.cpp:2464
msgid "Toolbar Saving Error"
msgstr "工具列儲存錯誤"
#: src/quanta.cpp:2499 src/quanta.cpp:3322 src/quanta.cpp:3327
msgid "Save Toolbar"
msgstr "儲存工具列"
#: dialogs/actionconfigdialog.cpp:888 src/quanta.cpp:2500 src/quanta.cpp:2664
#: src/quanta.cpp:2700 src/quanta.cpp:2802
msgid "Please select a toolbar:"
msgstr "請選擇一個工具列:"
#: src/quanta.cpp:2556
msgid ""
"<qt>You must save the toolbars to the following folder: "
"<br>"
"<br><b>%1</b></qt>"
msgstr "<qt>您一定要把工具列儲存至以下的目錄:<br><br><b>%1</b></qt>"
#: src/quanta.cpp:2594
msgid "New Toolbar"
msgstr "新的工具列"
#: src/quanta.cpp:2594
msgid "Enter toolbar name:"
msgstr "請輸入工具列名稱:"
#: src/quanta.cpp:2594
#, c-format
msgid "User_%1"
msgstr "User_%1"
#: src/quanta.cpp:2663 utility/toolbartabwidget.cpp:49
#: utility/toolbartabwidget.cpp:327
msgid "Remove Toolbar"
msgstr "移除工具列"
#: src/quanta.cpp:2699
msgid "Send Toolbar"
msgstr "傳送工具列"
#: src/quanta.cpp:2738
msgid "Send toolbar in email"
msgstr "以 Email 傳送工具列"
#: src/quanta.cpp:2740
msgid ""
"Hi,\n"
" This is a Quanta Plus [http://quanta.tdewebdev.org] toolbar.\n"
"\n"
"Have fun.\n"
msgstr ""
"您好,\n"
" 這個是一個 Quanta Plus [http://quanta.sourceforge.net] 工具列。\n"
"\n"
"Have fun.\n"
#: src/quanta.cpp:2744 src/quanta.cpp:3618 treeviews/scripttreeview.cpp:279
#: treeviews/templatestreeview.cpp:991
msgid "Content:"
msgstr "內容:"
#: src/quanta.cpp:2752
msgid "Quanta Plus toolbar"
msgstr "Quanta Plus 工具列"
#: src/quanta.cpp:2757 src/quanta.cpp:3632 treeviews/scripttreeview.cpp:293
#: treeviews/templatestreeview.cpp:1005
msgid ""
"No destination address was specified.\n"
" Sending is aborted."
msgstr ""
"沒有指定要傳送的地址。\n"
" 傳送已中止。"
#: src/quanta.cpp:2757 src/quanta.cpp:3632 treeviews/scripttreeview.cpp:293
#: treeviews/templatestreeview.cpp:1005
msgid "Error Sending Email"
msgstr "傳送郵件時發生錯誤"
#: src/quanta.cpp:2801 src/quanta.cpp:2824
msgid "Rename Toolbar"
msgstr "重新命名工具列"
#: src/quanta.cpp:2824
msgid "Enter the new name:"
msgstr "請輸入新的名稱:"
#: src/quanta.cpp:3076
msgid "Change the current DTD."
msgstr "更換目前的 DTD。"
#: src/quanta.cpp:3098
msgid "Edit DTD"
msgstr "編輯 DTD"
#: src/quanta.cpp:3099 src/quanta.cpp:3562
msgid "Please select a DTD:"
msgstr "請選擇一個 DTD"
#: src/quanta.cpp:3101
msgid "Create a new DTEP description"
msgstr "建立一個新的 DTEP 描述"
#: src/quanta.cpp:3102
msgid "Load DTEP description from disk"
msgstr "從磁碟中載入 DTEP 描述"
#: src/quanta.cpp:3321
msgid ""
"<qt>Toolbar <b>%1</b> is new and unsaved. Do you want to save it before it is "
"removed?</qt>"
msgstr "<qt>工具列<b>%1</b>是新的而且未被儲存。您要在它被移除之前儲存它嗎?</qt>"
#: src/quanta.cpp:3326
msgid ""
"<qt>The toolbar <b>%1</b> was modified. Do you want to save it before it is "
"removed?</qt>"
msgstr "<qt>工具列<b>%1</b>已被修改。您要在它被移除之前儲存它嗎?</qt>"
#: src/quanta.cpp:3545
msgid "Select DTEP Directory"
msgstr "選擇 DTEP 目錄"
#: src/quanta.cpp:3561
msgid "Send DTD"
msgstr "傳送 DTD"
#: src/quanta.cpp:3612
msgid "Send DTEP in Email"
msgstr "以 Email 傳送 DTEP"
#: src/quanta.cpp:3614
msgid ""
"Hi,\n"
" This is a Quanta Plus [http://quanta.tdewebdev.org] DTEP definition tarball.\n"
"\n"
"Have fun.\n"
msgstr ""
"您好,\n"
" 這個是一個 Quanta Plus [http://quanta.sourceforge.net] DTEP 定義的tarball.\n"
"\n"
"Have fun.\n"
#: src/quanta.cpp:3627
msgid "Quanta Plus DTD"
msgstr "Quanta Plus DTD"
#: src/quanta.cpp:3723
msgid "Code formatting can only be done in the source view."
msgstr "縮排代碼的功能只可在代碼檢視模式時才能使用。"
#: src/quanta.cpp:3741
msgid "The Document Properties Dialog is only for HTML and XHTML."
msgstr "文件屬性對話櫂只能被 HTML 及 XHTML 使用。"
#: src/quanta.cpp:3858
msgid "Do you want to review the upload?"
msgstr ""
#: src/quanta.cpp:3858
msgid "Enable Quick Upload"
msgstr "啟用快速上傳"
#: src/quanta.cpp:3858
#, fuzzy
msgid "Review"
msgstr "預覽"
#: src/quanta.cpp:3858
#, fuzzy
msgid "Do Not Review"
msgstr "預覽"
#: src/quanta.cpp:4081 src/quanta.cpp:4768 src/quanta.cpp:4803
msgid ""
"The file must be saved before external preview.\n"
"Do you want to save and preview?"
msgstr ""
"這個檔案在外部預覽前要先被儲存。\n"
"您要儲存它來繼續預覽嗎?"
#: src/quanta.cpp:4083 src/quanta.cpp:4770 src/quanta.cpp:4805
msgid "Save Before Preview"
msgstr "預覽前儲存"
#: src/main.cpp:70 src/quanta.cpp:4106 treeviews/basetreeview.cpp:440
#: treeviews/templatestreeview.cpp:567
msgid "Quanta"
msgstr "Quanta"
#: src/quanta.cpp:4330 src/quantadoc.cpp:320
#, c-format
msgid "Unknown tag: %1"
msgstr "未知的標籤 : %1"
#: src/quanta.cpp:4552
msgid ""
"The CSS Editor cannot be invoked here.\n"
"Try to invoke it on a tag or on a style section."
msgstr ""
"CSS 編輯器無法在這裏被調用。\n"
"請嘗試在標籤或 style 區域內調用它。"
#: src/quanta.cpp:4561
msgid "Email Link (mailto)"
msgstr "Email Link (mailto)"
#: src/quanta.cpp:4623
msgid "Generate List"
msgstr "產生列表"
#: src/quanta.cpp:4690
msgid ""
"The table structure is invalid. Most probably you forgot to close some tags."
msgstr "這個表格結構是無效的,想必是您忘記加上某些結束標籤了。"
#: components/tableeditor/tableeditor.cpp:1168
#: components/tableeditor/tableeditor.cpp:1189
#: components/tableeditor/tableeditor.cpp:1204 src/quanta.cpp:4690
msgid "Cannot Read Table"
msgstr "無法讀取表格"
#: src/quanta.cpp:5359
msgid "Annotate Document"
msgstr "加上文件附註"
#: src/viewmanager.cpp:71
msgid "Close &Other Tabs"
msgstr "關閉其他的分頁(&O)"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2581
#: src/viewmanager.cpp:72
msgid "Close &All"
msgstr "關閉全部(&A)"
#: src/viewmanager.cpp:74
msgid "&Upload File"
msgstr "上傳檔案(&U)"
#: src/viewmanager.cpp:75
msgid "&Delete File"
msgstr "刪除檔案(&D)"
#: src/viewmanager.cpp:85
msgid "&Switch To"
msgstr "切換至(&S)"
#: src/viewmanager.cpp:110 src/viewmanager.cpp:111
#, c-format
msgid "Untitled%1"
msgstr "無標題%1"
#: src/viewmanager.cpp:648
msgid "CVS"
msgstr "CVS"
#: src/document.cpp:182
msgid "Breakpoint"
msgstr "中斷點"
#: src/document.cpp:184
msgid "Annotation"
msgstr "附註"
#: src/document.cpp:412
msgid "<qt>Cannot download <b>%1</b>.</qt>"
msgstr "<qt>無法下載 <b>%1</b>。</qt>"
#: src/document.cpp:424
msgid "<qt>Cannot open <b>%1</b> for reading.</qt>"
msgstr "<qt>無法開啟 <b>%1</b> 作讀取。</qt>"
#: src/document.cpp:2773
msgid "Change Tag & Attribute Case"
msgstr "改變標籤 & 標籤屬性的大小寫"
#: src/document.cpp:2792
msgid "Working..."
msgstr "工作中..."
#: src/document.cpp:2793
msgid ""
"Changing tag and attribute case. This may take some time, depending on the "
"document complexity."
msgstr "正在轉換標籤和標籤屬性的大小寫。所需的時間取決於文件的複雜程度。"
#: src/document.cpp:2991
msgid "This DTD is not known for Quanta. Choose a DTD or create a new one."
msgstr "Quanta 不認識這個 DTD。請選擇一個已知的 DTD 或建立一個新的。"
#: src/document.cpp:3046
msgid ""
"\"%1\" is used for \"%2\".\n"
msgstr ""
"\"%2\" 正在使用 \"%1\"。\n"
#: src/main.cpp:42
msgid "Quanta Plus Web Development Environment"
msgstr "Quanta Plus 網頁開發環境"
#: src/main.cpp:46
msgid ""
"Our goal is to be nothing less than the best possible tool for\n"
" working with tagging and scripting languages.\n"
"\n"
"Quanta Plus is not in any way affiliated with any commercial\n"
" versions of Quanta. \n"
"\n"
"We hope you enjoy Quanta Plus.\n"
"\n"
msgstr ""
"我們的目標是成為標籤及指令語言工具的王者。\n"
"\n"
"Quanta Plus 與所有 Quanta 商業版本之間沒有任何關聯。\n"
"\n"
"希望您可以盡情享受 Quanta Plus。\n"
"\n"
#: src/main.cpp:52
#, fuzzy
msgid "The Quanta+ developers"
msgstr "(C) 2000-2005 - The Quanta+ 開發人員"
#: src/main.cpp:56
msgid "File to open"
msgstr "要開啟的檔案"
#: src/main.cpp:57
msgid "Whether we start as a one-instance application"
msgstr "是否以單一實體啟動 Quanta"
#: src/main.cpp:58
msgid "Do not show the nice logo during startup"
msgstr "啟動時不要顯示那個好看的標誌"
#: src/main.cpp:59
msgid "Reset the layout of the user interface to the default"
msgstr "重設使用介面的布局"
#: src/main.cpp:79
msgid "Project Lead - public liaison"
msgstr "專案主管 - 外界聯繫"
#: src/main.cpp:80
msgid "Program Lead - bug squisher"
msgstr "程式主管 - 除蟲工人"
#: src/main.cpp:81 src/main.cpp:82
msgid "Inactive - left for commercial version"
msgstr "不活躍 - 開發商業版本而離開了"
#: src/main.cpp:85
msgid "Various fixes, table editor maintainer"
msgstr "各種修補,表格編輯器的維護人員"
#: src/main.cpp:89
msgid "Debugger interface and integration of the Gubed PHP debugger"
msgstr "除錯器介面及 Gubed PHP 除錯器的整合"
#: src/main.cpp:93
msgid "Debugger interface"
msgstr "除錯器介面"
#: src/main.cpp:97
msgid "XML - compliance, tools & DTEPs"
msgstr "XML - 標準的符合程度,工具 & DTEP"
#: src/main.cpp:101
msgid "Template contributions"
msgstr "範本貢獻"
#: src/main.cpp:105
msgid "ColdFusion support"
msgstr "ColdFusion 支援"
#: src/main.cpp:109
msgid "Initial debugger work - advanced test"
msgstr "最初的除錯器工作 - 深入測試"
#: src/main.cpp:113
msgid "Coding and tag dialog definition documentation and more"
msgstr ""
#: src/main.cpp:117
msgid "Original plugin system, various fixes"
msgstr "原本的外掛程式系統,各樣修補"
#: src/main.cpp:121
msgid ""
"Original documentation, many cool parsing scripts to automate \n"
"development"
msgstr "以前的文件,寫了很多解析指令稿加快效率"
#: src/main.cpp:125
msgid ""
"Various fixes, foundational code for the old DTD parsing and other \n"
"DTD related work"
msgstr "各樣修補,貢獻了以前的 DTD 解析器及其他 DTD 相關工作"
#: src/main.cpp:129
msgid "Tree based upload dialog"
msgstr "樹狀表示的上傳對話框"
#: src/main.cpp:133
msgid "Addition and maintenance of DTDs"
msgstr "加入和維護 DTD"
#: src/main.cpp:137
msgid "Visual Page Layout part, new undo/redo system"
msgstr "VPL新的復原/重做系統"
#: src/main.cpp:145
msgid "Frame wizard, CSS wizard"
msgstr "框架精靈CSS 精靈"
#: src/main.cpp:149
msgid "Crash recovery"
msgstr "當機回復"
#: src/main.cpp:153
msgid "Improvements to the treeview code; code review and cleanup"
msgstr "改進樹狀檢視的代碼;代碼簡化"
#: src/main.cpp:157
msgid "Original CSS editor"
msgstr "原本的 CSS 編輯器"
#: src/main.cpp:161
msgid "Cool splash screen for many version releases of Quanta"
msgstr "Quanta 很多版本中又棒又酷的啟動畫面"
#: src/main.cpp:165
msgid "Danish translation"
msgstr "翻譯成丹麥文"
#: src/main.cpp:169
msgid "Part of a code for the old PHP4 Debugger"
msgstr "舊版 PHP4 除錯器的一部分代碼"
#: src/main.cpp:173
msgid "XSLT tags"
msgstr "XSLT 標籤"
#: src/main.cpp:177
msgid "Splash screen and icon for 3.2"
msgstr "3.2 版的啟動畫面及圖示"
#: src/quantadoc.cpp:275
msgid "Attributes of <%1>"
msgstr "<%1>的屬性"
#: src/dtds.cpp:688
msgid ""
"<qt>The DTD tag file %1 is not valid."
"<br> The error message is: <i>%2 in line %3, column %4.</i></qt>"
msgstr "<qt>DTD 標籤檔案 %1 無效。<br>錯誤訊息為:<i>%2 於行 %3字 %4。</i></qt>"
#: src/dtds.cpp:689
msgid "Invalid Tag File"
msgstr "無效的標籤檔案"
#: src/dtds.cpp:917 src/dtds.cpp:949
msgid "<qt>Do you want to replace the existing <b>%1</b> DTD?</qt>"
msgstr "<qt>您要取代目前的 <b>%1</b> DTD 嗎?</qt>"
#: src/dtds.cpp:917 src/dtds.cpp:949
msgid "Do Not Replace"
msgstr "不要取代"
#: src/dtds.cpp:927 src/dtds.cpp:971
msgid "<qt>Use the newly loaded <b>%1</b> DTD for the current document?</qt>"
msgstr "<qt>要對目前的文件使用剛載入的 <b>%1</b> DTD 嗎?</qt>"
#: src/dtds.cpp:927 src/dtds.cpp:971
msgid "Change DTD"
msgstr "更改 DTD"
#: src/dtds.cpp:927 src/dtds.cpp:971
msgid "Use"
msgstr "使用"
#: src/dtds.cpp:927 src/dtds.cpp:971
msgid "Do Not Use"
msgstr "不使用"
#: src/dtds.cpp:956
msgid ""
"<qt>Cannot read the DTEP from <b>%1</b>. Check that the folder contains a valid "
"DTEP (<i>description.rc and *.tag files</i>).</qt>"
msgstr ""
"<qt>無法從 <b>%1</b> 讀取 DTEP。請檢查該目錄包含一個有效的 DTEP (<i>description.rc 及 *.tag 檔案</i>"
")。</qt>"
#: src/dtds.cpp:956
msgid "Error Loading DTEP"
msgstr "載入 DTEP 時發生錯誤"
#: src/dtds.cpp:960
msgid "<qt>Autoload the <b>%1</b> DTD in the future?</qt>"
msgstr "<qt>以後自動載入 <b>%1</b> DTD 嗎?</qt>"
#: src/dtds.cpp:960 utility/newstuff.cpp:73
msgid "Load"
msgstr "載入"
#: src/dtds.cpp:960
msgid "Do Not Load"
msgstr "不載入"
#: src/dtds.cpp:982
msgid "Load DTD Entities Into DTEP"
msgstr "載入 DTD 項目至 DTEP"
#: src/quantaview.cpp:298 src/quantaview.cpp:304
msgid "[modified]"
msgstr "[已修改]"
#: src/quantaview.cpp:398 src/quantaview.cpp:447
#, c-format
msgid "The VPL Mode does not support the current DTD, at the moment: %1"
msgstr "VPL 模式現在尚未支援目前的 DTD: %1"
#: src/quantaview.cpp:966 utility/tagaction.cpp:1123
msgid "Cannot insert the tag: invalid location."
msgstr "無法插入標籤:無效的位置。"
#: src/quantaview.cpp:1067
msgid ""
"The file \"%1\" has been modified.\n"
"Do you want to save it?"
msgstr ""
"檔案 \"%1\" 已經被修改了,\n"
"你要儲存它嗎?"
#: src/quanta_init.cpp:185
msgid "Attribute Editor"
msgstr "標籤屬性編輯器"
#: src/quanta_init.cpp:186
msgid "Project"
msgstr "專案"
#: src/quanta_init.cpp:187 treeviews/templatestreeview.cpp:176
msgid "Templates"
msgstr "範本"
#: src/quanta_init.cpp:188 treeviews/structtreeview.cpp:155
msgid "Document Structure"
msgstr "文件結構"
#: src/quanta_init.cpp:189 treeviews/scripttreeview.cpp:66
msgid "Scripts"
msgstr "指令稿"
#: src/quanta_init.cpp:190
msgid "Messages"
msgstr "訊息"
#: src/quanta_init.cpp:191
msgid "Problems"
msgstr "問題"
#: src/quanta_init.cpp:192
msgid "Annotations"
msgstr "附註"
#: src/quanta_init.cpp:347
msgid "Line: 00000 Col: 000"
msgstr "行: 00000 字: 000"
#: src/quanta_init.cpp:485
msgid "Message Window..."
msgstr "訊息視窗..."
#: src/quanta_init.cpp:709
msgid "Annotate..."
msgstr "註解..."
#: src/quanta_init.cpp:710
msgid "&Edit Current Tag..."
msgstr "編輯目前的標籤(&E)..."
#: src/quanta_init.cpp:713
msgid "&Select Current Tag Area"
msgstr "選擇目前標籤的覆蓋範圍(&S)"
#: src/quanta_init.cpp:716
msgid "E&xpand Abbreviation"
msgstr "展開縮寫(&X)"
#: src/quanta_init.cpp:720
msgid "&Report Bug..."
msgstr "報告錯誤(&R)..."
#: src/quanta_init.cpp:732
msgid "Ti&p of the Day"
msgstr "每日小提示(&P)"
#: src/quanta_init.cpp:739
msgid "Close Other Tabs"
msgstr "關閉其他分頁"
#: src/quanta_init.cpp:743
msgid "Open / Open Recent"
msgstr "開啟 / 開啟最近的"
#: src/quanta_init.cpp:746
msgid "Close All"
msgstr "關閉全部"
#: src/quanta_init.cpp:754
msgid "Save All..."
msgstr "儲存全部..."
#: src/quanta_init.cpp:757
msgid "Reloa&d"
msgstr "重新載入(&D)"
#: src/quanta_init.cpp:762
msgid "Save as Local Template..."
msgstr "另存為本地範本..."
#: src/quanta_init.cpp:766
msgid "Save Selection to Local Template File..."
msgstr "另存選擇區域到一個本地範本檔案..."
#: src/quanta_init.cpp:774
msgid "Find in Files..."
msgstr "於檔案中找尋"
#: src/quanta_init.cpp:785
msgid "&Context Help..."
msgstr "系絡求助(&C)..."
#: src/quanta_init.cpp:789
msgid "&Quanta Homepage"
msgstr "&Quanta 主頁"
#: src/quanta_init.cpp:793
msgid "&User Mailing List"
msgstr "用戶求助郵件列表(&U)"
#: src/quanta_init.cpp:797
msgid "Make &Donation"
msgstr "捐獻(&D)"
#: src/quanta_init.cpp:801
msgid "Tag &Attributes..."
msgstr "標籤的屬性(&A)..."
#: src/quanta_init.cpp:805
msgid "&Change the DTD..."
msgstr "更換 DTD (&C)..."
#: src/quanta_init.cpp:809
msgid "&Edit DTD Settings..."
msgstr "更改 DTD 設定(&E)..."
#: src/quanta_init.cpp:813
msgid "&Load && Convert DTD..."
msgstr "載入 && 轉換 DTD(&L)..."
#: src/quanta_init.cpp:816
msgid "Load DTD E&ntities..."
msgstr "載入 DTD 項目(&N)..."
#: src/quanta_init.cpp:820
msgid "Load DTD &Package (DTEP)..."
msgstr "載入 DTD 套件(DTE&P)..."
#: src/quanta_init.cpp:824
msgid "Send DTD Package (DTEP) in E&mail..."
msgstr "以電子郵件傳送 DTD 套件(&M)..."
#: src/quanta_init.cpp:828
msgid "&Download DTD Package (DTEP)..."
msgstr "下載 &DTD 套件(DTEP)..."
#: src/quanta_init.cpp:831
msgid "&Upload DTD Package (DTEP)..."
msgstr "上傳 DTD 套件(DTEP)(&U)..."
#: src/quanta_init.cpp:839
msgid "&Document Properties"
msgstr "文件屬性(&D)"
#: src/quanta_init.cpp:843
msgid "F&ormat XML Code"
msgstr "編排 XML 代碼(&O)"
#: src/quanta_init.cpp:847
msgid "&Convert Tag && Attribute Case..."
msgstr "轉換標籤 && 標籤屬性的大小寫(&C)..."
#: src/quanta_init.cpp:855
msgid "&Source Editor"
msgstr "代碼編輯器(&S)"
#: src/quanta_init.cpp:861
msgid "&VPL Editor"
msgstr "&VPL 編輯器"
#: src/quanta_init.cpp:867
msgid "VPL && So&urce Editors"
msgstr "VPL && 代碼編輯器(&U)"
#: src/quanta_init.cpp:880
msgid "&Reload Preview"
msgstr "重新載入預覽(&R)"
#: src/quanta_init.cpp:885
msgid "&Previous File"
msgstr "上一個檔案(&P)"
#: src/quanta_init.cpp:889
msgid "&Next File"
msgstr "下一個檔案(&N)"
#: src/quanta_init.cpp:896
msgid "Configure &Actions..."
msgstr "設定動作(&A)..."
#: src/quanta_init.cpp:904
msgid "Configure Pre&view..."
msgstr "設定預覽(&V)..."
#: src/quanta_init.cpp:907
msgid "Load &Project Toolbar"
msgstr "載入專案工具列(&P)"
#: src/quanta_init.cpp:911
msgid "Load &Global Toolbar..."
msgstr "載入全域工具列(&G)..."
#: src/quanta_init.cpp:912
msgid "Load &Local Toolbar..."
msgstr "載入本地工具列(&L)..."
#: src/quanta_init.cpp:913
msgid "Save as &Local Toolbar..."
msgstr "另存為本地工具列(&L)..."
#: src/quanta_init.cpp:914
msgid "Save as &Project Toolbar..."
msgstr "另存為專案工具列(&P)..."
#: src/quanta_init.cpp:915
msgid "&New User Toolbar..."
msgstr "新的使用者工具列(&N)..."
#: src/quanta_init.cpp:916
msgid "&Remove User Toolbar..."
msgstr "移除使用者工具列(&R)..."
#: src/quanta_init.cpp:917
msgid "Re&name User Toolbar..."
msgstr "重新命名使用者工具列(&N)..."
#: src/quanta_init.cpp:918
msgid "Send Toolbar in E&mail..."
msgstr "以電子郵件傳送工具列(&M)..."
#: src/quanta_init.cpp:919
msgid "&Upload Toolbar..."
msgstr "上傳的工具列(&U)..."
#: src/quanta_init.cpp:920
msgid "&Download Toolbar..."
msgstr "下載工具列(&D)..."
#: src/quanta_init.cpp:922
msgid "Smart Tag Insertion"
msgstr "智能標籤插入"
#: src/quanta_init.cpp:925
msgid "Show DTD Toolbar"
msgstr "顯示 DTD 工具列"
#: src/quanta_init.cpp:928
msgid "Hide DTD Toolbar"
msgstr "隱藏 DTD 工具列"
#: src/quanta_init.cpp:930
msgid "Complete Text"
msgstr "完整文字"
#: src/quanta_init.cpp:932
msgid "Completion Hints"
msgstr "補完提示"
#: src/quanta_init.cpp:939
msgid "Upload..."
msgstr "上傳..."
#: src/quanta_init.cpp:940
msgid "Delete File"
msgstr "刪除檔案"
#: src/quanta_init.cpp:942
msgid "Upload Opened Project Files..."
msgstr "上傳已開啟的專案檔案..."
#: src/quanta_init.cpp:1003
msgid "&Preview"
msgstr "預覽(&P)"
#: src/quanta_init.cpp:1007
msgid "Preview Without Frames"
msgstr "預覽(不要使用框架)"
#: src/quanta_init.cpp:1012
msgid "View with &Konqueror"
msgstr "使用 &Konqueror 預覽"
#: src/quanta_init.cpp:1034
msgid "View with L&ynx"
msgstr "使用 L&ynx 預覽"
#: src/quanta_init.cpp:1040
msgid "Table Editor..."
msgstr "表格編輯器..."
#: src/quanta_init.cpp:1044
msgid "Quick List..."
msgstr "快速列表..."
#: src/quanta_init.cpp:1048
msgid "Color..."
msgstr "顏色..."
#: src/quanta_init.cpp:1053
msgid "Email..."
msgstr "電子郵件..."
#: src/quanta_init.cpp:1057
msgid "Misc. Tag..."
msgstr "其他標籤..."
#: src/quanta_init.cpp:1061
msgid "Frame Wizard..."
msgstr "框架精靈..."
#: src/quanta_init.cpp:1065
msgid "Paste &HTML Quoted"
msgstr "貼上 HTML 的引用(&H)"
#: src/quanta_init.cpp:1069
msgid "Paste &URL Encoded"
msgstr "貼上 URL 的編碼(&U)"
#: src/quanta_init.cpp:1073
msgid "Insert CSS..."
msgstr "插入 CSS..."
#: src/quanta_init.cpp:1174
msgid "Restore File"
msgstr "還原檔案"
#: src/quanta_init.cpp:1176
msgid ""
"<qt>A backup copy of a file was found:"
"<br>"
"<br>Original file: <b>%1</b>"
"<br>Original file size: <b>%2</b>"
"<br>Original file last modified on: <b>%3</b>"
"<br>"
"<br>Backup file size: <b>%4</b>"
"<br>Backup created on: <b>%5</b>"
"<br>"
"<br></qt>"
msgstr ""
"<qt>找到檔案的備份:"
"<br>"
"<br>原始檔案:<b>%1</b>"
"<br>原始檔案大小:<b>%2</b>"
"<br>原始檔案修改日期:<b>%3</b>"
"<br>"
"<br>備份檔案大小:<b>%4</b>"
"<br>備份檔案建立日期:<b>%5</b>"
"<br>"
"<br></qt>"
#: src/quanta_init.cpp:1186
msgid "&Restore the file from backup"
msgstr "從備份回復檔案(&R)"
#: src/quanta_init.cpp:1187
msgid "Do &not restore the file from backup"
msgstr "不要從備份回復檔案(&N)"
#: src/quanta_init.cpp:1296
msgid "Failed to query for running Quanta instances."
msgstr "查詢執行中 Quanta 實體時失敗。"
#: src/quanta_init.cpp:1407
msgid "various script based dialogs including the Quick Start dialog"
msgstr "各種由指令稿產生的對話框,包括快速開始對話框"
#: src/quanta_init.cpp:1414
msgid "HTML syntax checking"
msgstr "HTML 語法檢查"
#: src/quanta_init.cpp:1421
msgid "comparing of files by content"
msgstr "檔案內容比較"
#: src/quanta_init.cpp:1426
msgid "Control Center (tdebase)"
msgstr "控制中心 (tdebase)"
#: src/quanta_init.cpp:1429 src/quanta_init.cpp:1436
msgid "preview browser configuration"
msgstr "用作預覽的瀏覽器的設定"
#: src/quanta_init.cpp:1443
msgid "search and replace in files"
msgstr "在各個檔案中尋找並取代"
#: src/quanta_init.cpp:1450
msgid "XSLT debugging"
msgstr "XSLT 除錯"
#: src/quanta_init.cpp:1458
msgid "editing HTML image maps"
msgstr "編輯 HTML image maps"
#: src/quanta_init.cpp:1466
msgid "link validity checking"
msgstr "檢查連結有效性"
#: src/quanta_init.cpp:1473
msgid "CVS management plugin"
msgstr "CVS 管理外掛程式"
#: src/quanta_init.cpp:1478
msgid "<br><b>- %1</b> [<i>%2</i>] - %3 will not be available;"
msgstr "<br><b>- %1</b> [<i>%2</i>] - %3的功能將不可用;"
#: src/quanta_init.cpp:1503
msgid "integrated CVS management"
msgstr "CVS 整合管理"
#: src/quanta_init.cpp:1520
msgid "Some applications required for full functionality are missing:<br>"
msgstr "某些功能需要的應用程式並不存在:<br>"
#: src/quanta_init.cpp:1520
msgid ""
"<br>"
"<br>You may download the applications from the specified locations.</qt>"
msgstr "<br><br>您可以在上面的網址下載到各個應用程式。</qt>"
#: src/quanta_init.cpp:1520
msgid "Missing Applications"
msgstr "找不到應用程式"
#: messages/messageitem.cpp:73 messages/messageitem.cpp:81
msgid "File: "
msgstr "檔案:"
#: messages/messageitem.cpp:76
msgid ", "
msgstr ", "
#: messages/messageoutput.cpp:50
msgid "&Save As..."
msgstr "另存為(&S)..."
#: messages/messageoutput.cpp:155
msgid ""
"*.log|Log Files (*.log)\n"
"*|All Files"
msgstr ""
"*.log|記錄檔案 (*.log)\n"
"*|所有檔案"
#: messages/messageoutput.cpp:155
msgid "Save Log File"
msgstr "儲存記錄檔案"
#: messages/messageoutput.cpp:161
msgid "<qt>File<br><b>%1</b><br>already exists. Overwrite it?</qt>"
msgstr "<qt>檔案<br><b>%1</b><br>已存在。要覆寫嗎?</qt>"
#: ../lib/compatibility/knewstuff/knewstuffgeneric.cpp:135
#: messages/messageoutput.cpp:162 project/projectprivate.cpp:920
#: treeviews/basetreeview.cpp:1041 treeviews/templatestreeview.cpp:470
#: utility/quantacommon.cpp:710
msgid "Overwrite"
msgstr "覆寫"
#: messages/messageoutput.cpp:167
msgid "<qt>Cannot save log file<br><b>%1</b></qt>"
msgstr "<qt>無法儲存記錄檔案<br><b>%1</b></qt>"
#: messages/annotationoutput.cpp:51 messages/annotationoutput.cpp:104
#: messages/annotationoutput.cpp:204
msgid "For You"
msgstr "您的附註"
#: components/csseditor/cssselector.cpp:49
#: components/csseditor/tlpeditors.cpp:114
#: components/csseditor/tlpeditors.cpp:120
#: components/csseditor/tlpeditors.cpp:126 messages/annotationoutput.cpp:63
msgid "All Files"
msgstr "所有檔案"
#: messages/annotationoutput.cpp:87
msgid "Line %1: %2"
msgstr "行 %1: %2"
#: messages/annotationoutput.cpp:201
#, c-format
msgid "For You: %1"
msgstr "您的附註:%1"
#: messages/annotationoutput.cpp:351
msgid ""
"<qt>There are annotations addressed for you."
"<br> To view them select the <i>For You</i> tab in the <i>Annotations</i> "
"toolview.</qt>"
msgstr "<qt>有附註寫給你。<br> 要檢視它們,請打開<i>附註</i>工具檢視中的<i>您的附註</i>分頁。</qt>"
#: messages/annotationoutput.cpp:351
msgid "New Annotations"
msgstr "新增附註"
#: dialogs/dirtydlg.cpp:44
#, fuzzy
msgid "<qt>The file <b>%1</b> was changed outside of the Quanta editor.</qt>"
msgstr "這個檔案已在 Quanta 外部被更改"
#: dialogs/tagdialogs/tagimgdlgdata.cpp:27
msgid "Image source:"
msgstr "圖片來源:"
#: dialogs/tagdialogs/tagimgdlgdata.cpp:46
msgid "Width:"
msgstr "寬度:"
#: dialogs/tagdialogs/tagimgdlgdata.cpp:58
msgid "Height:"
msgstr "高度:"
#: dialogs/tagdialogs/tagimgdlgdata.cpp:74
msgid "HSpace:"
msgstr "HSpace:"
#: dialogs/tagdialogs/tagimgdlgdata.cpp:85
msgid "VSpace:"
msgstr "VSpace:"
#: dialogs/tagdialogs/tagimgdlgdata.cpp:93
msgid "Alternate text:"
msgstr "替代文字:"
#: dialogs/tagdialogs/tagimgdlgdata.cpp:103
msgid "Border:"
msgstr "外框:"
#: dialogs/tagdialogs/tagimgdlgdata.cpp:115
msgid "Align:"
msgstr "對齊:"
#: dialogs/tagdialogs/tagmaildlg.cpp:96
msgid "Select Address"
msgstr "選擇地址"
#: dialogs/tagdialogs/tagmaildlg.cpp:104
msgid "No addresses found."
msgstr "找不到地址。"
#: dialogs/tagdialogs/colorcombo.cpp:178 dialogs/tagdialogs/colorcombo.cpp:232
msgid "Custom..."
msgstr "自定..."
#: dialogs/tagdialogs/tagimgdlg.cpp:107
msgid ""
"|Image Files\n"
"*|All Files"
msgstr ""
"|圖片檔案\n"
"*|所有檔案"
#: dialogs/tagdialogs/tagdialog.cpp:127 dialogs/tagdialogs/tagdialog.cpp:146
#: dialogs/tagdialogs/tagdialog.cpp:345 dialogs/tagdialogs/tagdialog.cpp:427
msgid "Unknown tag"
msgstr "未知的標籤"
#: dialogs/tagdialogs/tagdialog.cpp:138
msgid "Tag Properties: "
msgstr "標籤屬性:"
#: dialogs/tagdialogs/tagquicklistdlgdata.cpp:27
msgid "Rows:"
msgstr "列:"
#: dialogs/tagdialogs/tagquicklistdlgdata.cpp:55
msgid "Ordered"
msgstr "有排序"
#: dialogs/tagdialogs/tagquicklistdlgdata.cpp:61
msgid "Unordered"
msgstr "無排序"
#: dialogs/actionconfigdialog.cpp:151
msgid "&Add New Toolbar"
msgstr "加入新的工具列(&A)"
#: dialogs/actionconfigdialog.cpp:152
msgid "&Remove Toolbar"
msgstr "移除工具列(&R)"
#: dialogs/actionconfigdialog.cpp:153
msgid "&Edit Toolbar"
msgstr "編輯工具列(&E)"
#: dialogs/actionconfigdialog.cpp:193
msgid "Do you really want to remove the \"%1\" toolbar?"
msgstr "您真的要移除 \"%1\" 工具列嗎?"
#: dialogs/actionconfigdialog.cpp:269 dialogs/actionconfigdialog.cpp:782
msgid "Do you want to save the changes made to this action?"
msgstr "您要儲存這個動作的變更嗎?"
#: dialogs/actionconfigdialog.cpp:765
msgid ""
"The '%1' key combination has already been allocated to the \"%2\" action.\n"
"Please choose a unique key combination."
msgstr ""
"這個組合 '%1' 已經被分派至另一個動作 \"%2\"。\n"
"請選擇獨立的按鍵組合。"
#: dialogs/actionconfigdialog.cpp:769
msgid "Conflicting Shortcuts"
msgstr "快速鍵衝突"
#: dialogs/actionconfigdialog.cpp:841
msgid ""
"<qt>Removing the action removes all the references to it.\n"
"Are you sure you want to remove the <b>%1</b> action?</qt>"
msgstr ""
#: dialogs/actionconfigdialog.cpp:887
msgid "Add Action to Toolbar"
msgstr "加入動作到工具列中"
#: dialogs/settings/abbreviation.cpp:95
msgid "New Abbreviation Group"
msgstr "新增縮寫組別"
#: dialogs/settings/abbreviation.cpp:95
msgid "Group name:"
msgstr "組別名稱:"
#: dialogs/settings/abbreviation.cpp:100
msgid ""
"<qt>There is already an abbreviation group called <b>%1</b>"
". Choose an unique name for the new group.</qt>"
msgstr "<qt>縮寫組別 <b>%1</b> 已經存在。 請為新組別重新選擇一個唯一的名稱。</qt>"
#: dialogs/settings/abbreviation.cpp:100
msgid "Group already exists"
msgstr "組別已經存在"
#: dialogs/settings/abbreviation.cpp:118
msgid "Add DTEP"
msgstr "加入 DTEP"
#: dialogs/settings/abbreviation.cpp:119
msgid "Select a DTEP:"
msgstr "請選擇一個 DTEP"
#: dialogs/settings/abbreviation.cpp:145
msgid "<qt>Select a DTEP from the list before using <b>Remove</b>.</qt>"
msgstr "<qt>在使用<b>移除</b>之前請先從列表中選擇一個 DTEP。</qt>"
#: dialogs/settings/abbreviation.cpp:145
msgid "No DTEP Selected"
msgstr "沒有選擇 DTEP"
#: dialogs/settings/abbreviation.cpp:190
msgid "<qt>Do you really want to remove the <b>%1</b> template?</qt>"
msgstr "<qt>您真的要移除範本 <b>%1</b> 嗎?</qt>"
#: dialogs/settings/abbreviation.cpp:204
msgid "Edit Code Template"
msgstr "編輯代碼範本"
#: dialogs/settings/abbreviation.cpp:273
msgid ""
"<qt>Cannot open the file <b>%1</b> for writing.\n"
"Modified abbreviations will be lost when you quit Quanta.</qt>"
msgstr ""
"<qt>無法開啟檔案 <b>%1</b> 作寫入。\n"
"修改過的縮寫將會在離開 Quanta 時消失。</qt>"
#: components/framewizard/fmfpeditor.cpp:40 dialogs/filecombo.cpp:93
msgid "*|All Files"
msgstr "*|所有檔案"
#: dialogs/dtepeditdlg.cpp:63
#, fuzzy
msgid "&Pages"
msgstr "使用者"
#: dialogs/dtepeditdlg.cpp:206
msgid ""
"<qt>The file <b>%1</b> is not writable."
"<br>Do you want to save the configuration to a different file?</qt>"
msgstr "<qt>檔案 <b>%1</b> 無法寫入。<br>您要把組態儲存至不同的檔案嗎?</qt>"
#: dialogs/dtepeditdlg.cpp:206
msgid "Save to Different File"
msgstr "儲存至不同的檔案"
#: dialogs/dtepeditdlg.cpp:206
msgid "Do Not Save"
msgstr "不儲存"
#: dialogs/dtepeditdlg.cpp:208
msgid "*.rc|DTEP Description"
msgstr "*.rc|DTEP 描述檔案"
#: dialogs/dtepeditdlg.cpp:208
msgid "Save Description As"
msgstr "另存描述為"
#: dialogs/dtepeditdlg.cpp:444
msgid "Edit Structure Group"
msgstr "編輯架構組別"
#: dialogs/dtepeditdlg.cpp:494
msgid "Add Structure Group"
msgstr "加入架構組別"
#: dialogs/dtepeditdlg.cpp:539
msgid "<qt>Do you really want to delete the <b>%1</b> group?</qt>"
msgstr "<qt>您真的要刪除 <b>%1</b> 組別?</qt>"
#: dialogs/dtepeditdlg.cpp:539
msgid "Delete Group"
msgstr "刪除組別"
#: parts/kafka/domtreeview.cpp:35
msgid "Value (limited to 20 char)"
msgstr "數值(限制為 20 個字元)"
#: parts/kafka/domtreeview.cpp:36
msgid "Length"
msgstr "長度"
#: parts/kafka/domtreeview.cpp:37 parts/kafka/wkafkapart.cpp:71
msgid "ID"
msgstr "ID"
#: parts/kafka/domtreeview.cpp:146
msgid "Debugging KafkaWidget DOM Tree "
msgstr ""
#: parts/kafka/wkafkapart.cpp:68
msgid "Attribute"
msgstr "標籤屬性"
#: components/debugger/debuggerbreakpointview.cpp:61
#: parts/kafka/wkafkapart.cpp:68
msgid "Class"
msgstr "類別"
#: parts/kafka/wkafkapart.cpp:69
msgid "Pseudo-class"
msgstr "虛擬類別(Pseudo-class)"
#: parts/kafka/wkafkapart.cpp:69
msgid "CSS rules"
msgstr "CSS 規則"
#: parts/kafka/wkafkapart.cpp:69
#, fuzzy
msgid "Universal selector"
msgstr "相反選擇(&I)"
#: parts/kafka/wkafkapart.cpp:70
msgid "Linked stylesheets"
msgstr "外部連結的樣式表"
#: parts/kafka/wkafkapart.cpp:70
msgid "Embedded stylesheets"
msgstr "內嵌的樣式表"
#: parts/kafka/wkafkapart.cpp:70
msgid "Inline style attribute"
msgstr ""
#: parts/kafka/wkafkapart.cpp:71
msgid "Priority"
msgstr "優先級別"
#: parts/kafka/wkafkapart.cpp:72
msgid "Browser support"
msgstr "瀏覽器支援"
#: parts/kafka/wkafkapart.cpp:72
msgid "Pseudo-element"
msgstr ""
#: parts/kafka/wkafkapart.cpp:72
msgid "Imported"
msgstr "已匯入"
#: parts/kafka/wkafkapart.cpp:73
msgid "Inheritance"
msgstr "繼承"
#: parts/kafka/wkafkapart.cpp:73
msgid "Inherited"
msgstr "已繼承"
#: parts/kafka/wkafkapart.cpp:76
msgid "Undo/Redo history"
msgstr "復原/重覆的歷史"
#: parts/kafka/wkafkapart.cpp:76
msgid "CSS styles"
msgstr "CSS 風格"
#: parts/kafka/htmldocumentproperties.cpp:340 parts/kafka/wkafkapart.cpp:78
msgid "Sorry, VPL does not support this functionality yet."
msgstr "對不起VPL 暫時還未支援這個功能。"
#: parts/kafka/wkafkapart.cpp:79
msgid "Merge cells"
msgstr "合併儲存格"
#: parts/kafka/wkafkapart.cpp:80
msgid "Split cells"
msgstr "分割儲存格"
#: parts/kafka/wkafkapart.cpp:81
msgid "Edit CSS style of this Tag"
msgstr "編輯這個標籤的 CSS 風格"
#: parts/kafka/wkafkapart.cpp:82
msgid "Ident all"
msgstr "套用縮排至所有"
#: parts/kafka/htmldocumentproperties.cpp:89
msgid "Content"
msgstr "內容"
#: parts/kafka/htmldocumentproperties.cpp:98
msgid "Rule"
msgstr "規則"
#: parts/preview/whtmlpart.cpp:56
msgid "View &Document Source"
msgstr "檢視文件原始碼(&D)"
#: _translatorinfo.cpp:1
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Stanley Wong, zombit"
#: _translatorinfo.cpp:3
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "stanley18fan0k@yahoo.com.hk, zombit@kimo.com"
#: components/framewizard/fmfpeditor.cpp:36
msgid "*.html *.htm|HTML Files"
msgstr "*.html *.htm|HTML 檔案"
#: components/framewizard/fmfpeditor.cpp:37
msgid "*.php|PHP Files"
msgstr "*.php|PHP 檔案"
#: components/framewizard/fmfpeditor.cpp:38
msgid "*.xml|XML Files"
msgstr "*.xml|XML 檔案"
#: components/framewizard/fmfpeditor.cpp:39
msgid "*xhtml|XHTML Files"
msgstr "*xhtml|XHTML 檔案"
#: components/framewizard/framewizard.cpp:28
msgid "You must select an area."
msgstr "您需要選擇一個區域。"
#: components/framewizard/framewizard.cpp:29
msgid "Before editing a frame you must save the file."
msgstr "在編輯一個框架前您需要先儲存檔案。"
#: components/framewizard/framewizard.cpp:62
msgid "Enter the desired number of rows:"
msgstr "請輸入表格的列數:"
#: components/framewizard/framewizard.cpp:67
msgid "Enter the desired number of columns:"
msgstr "請輸入表格的欄數:"
#: components/csseditor/styleeditor.cpp:44
msgid "Open css dialog"
msgstr "開啟 CSS 對話盒"
#: components/csseditor/colorrequester.cpp:63
msgid "Open color dialog"
msgstr "開啟色彩對話盒"
#: components/csseditor/cssselector.cpp:49
msgid "HTML Files"
msgstr "HTML 檔案"
#: components/csseditor/cssselector.cpp:49
msgid "XHTML Files"
msgstr "XHTML 檔案"
#: components/csseditor/cssselector.cpp:49
msgid "XML Files"
msgstr "XML 檔案"
#: components/csseditor/fontfamilychooser.cpp:43
msgid "The Quick Brown Fox Jumps Over The Lazy Dog"
msgstr "The Quick Brown Fox Jumps Over The Lazy Dog"
#: components/csseditor/fontfamilychooser.cpp:84
msgid "These are the names of the available fonts on your system"
msgstr "這些是您的系統上可用的字型名稱"
#: components/csseditor/fontfamilychooser.cpp:85
msgid "These are the names of the generic fonts "
msgstr "這些是通用字型的名稱"
#: components/csseditor/fontfamilychooser.cpp:86
msgid "These are the names of the generic fonts you have selected "
msgstr "這些是您已選擇的通用字型名稱"
#: components/csseditor/fontfamilychooser.cpp:87
msgid "Click this to add a font to your style sheet"
msgstr "按一下這裏可以把一款字型加到您的樣式表中"
#: components/csseditor/fontfamilychooser.cpp:88
msgid "Click this to remove a font from your style sheet"
msgstr "按一下這裏可以從您的樣式表中移除一款字型"
#: components/csseditor/fontfamilychooser.cpp:89
msgid "Click this to make the font more preferable than the preceeding one"
msgstr "按這裏可以提高字型的優先等級"
#: components/csseditor/fontfamilychooser.cpp:90
msgid "Click this to make the font less preferable than the following one"
msgstr "按這裏可以降低字型的優先等級"
#: components/csseditor/stylesheetparser.cpp:22
msgid "has not been closed"
msgstr "還未關閉"
#: components/csseditor/stylesheetparser.cpp:23
msgid "needs an opening parenthesis "
msgstr "需要一個開圓括號 "
#: components/csseditor/stylesheetparser.cpp:85
msgid "The comment"
msgstr "註解"
#: components/csseditor/stylesheetparser.cpp:133
#: components/csseditor/stylesheetparser.cpp:141
#: components/csseditor/stylesheetparser.cpp:147
msgid "The selector"
msgstr "選擇器:"
#: components/csseditor/colorslider.cpp:77
msgid "Red"
msgstr "紅"
#: components/csseditor/colorslider.cpp:77
msgid "Green"
msgstr "綠"
#: components/csseditor/colorslider.cpp:77
msgid "Blue"
msgstr "藍"
#: components/csseditor/propertysetter.cpp:115
msgid "More..."
msgstr "更多..."
#: components/csseditor/tlpeditors.cpp:70
msgid ""
"With this line edit you can insert the URI of the resource you want to reach"
msgstr "您可以在此處輸入需要到達的資源的 URI"
#: components/csseditor/tlpeditors.cpp:74
msgid "Open the URI selector"
msgstr "開啟 URI 選擇器"
#: components/csseditor/tlpeditors.cpp:114
msgid "Image Files"
msgstr "圖片檔案"
#: components/csseditor/tlpeditors.cpp:120
msgid "Audio Files"
msgstr "音效檔案"
#: components/csseditor/tlpeditors.cpp:154
msgid "With this line edit you can insert the name of the font you want to use"
msgstr "您可以在此處輸入要使用的字型名稱"
#: components/csseditor/tlpeditors.cpp:156
msgid "Font family:"
msgstr "字型家族:"
#: components/csseditor/tlpeditors.cpp:158
msgid "Open font family chooser"
msgstr "開啟字型家族的選擇器"
#: components/cvsservice/cvsservice.cpp:50
msgid "&Commit..."
msgstr "提交(&C)..."
#: components/cvsservice/cvsservice.cpp:55
msgid "Update &To"
msgstr "更新至(&T)"
#: components/cvsservice/cvsservice.cpp:56
msgid "&Tag/Date..."
msgstr "標籤/日期(&T)..."
#: components/cvsservice/cvsservice.cpp:58
msgid "&HEAD"
msgstr "&HEAD"
#: components/cvsservice/cvsservice.cpp:60
msgid "Re&vert"
msgstr "還原(&V)"
#: components/cvsservice/cvsservice.cpp:63
msgid "&Add to Repository..."
msgstr "加入到 CVS 倉庫中(&A)..."
#: components/cvsservice/cvsservice.cpp:65
msgid "&Remove From Repository..."
msgstr "從 CVS 倉庫中移除(&R)..."
#: components/cvsservice/cvsservice.cpp:67
msgid "&Ignore in CVS Operations"
msgstr "在 CVS 操作中忽略它的存在"
#: components/cvsservice/cvsservice.cpp:69
msgid "Do &Not Ignore in CVS Operations"
msgstr "在 CVS 操作中不要忽略它的存在(&N)"
#: components/cvsservice/cvsservice.cpp:73
msgid "Show &Log Messages"
msgstr "顯示記錄訊息(&L)"
#: components/cvsservice/cvsservice.cpp:140
msgid "Running CVS update..."
msgstr "正在執行 CVS 更新..."
#: components/cvsservice/cvsservice.cpp:179
msgid "Updating to revision %1 ..."
msgstr "正在更新到修訂版本 %1 ..."
#: components/cvsservice/cvsservice.cpp:183
msgid "Updating to the version from %1 ..."
msgstr "正在從 %1 更新到版本 ..."
#: components/cvsservice/cvsservice.cpp:221
msgid "Updating to HEAD..."
msgstr "正在更新到 HEAD..."
#: components/cvsservice/cvsservice.cpp:256
msgid "Current"
msgstr "目前"
#: components/cvsservice/cvsservice.cpp:266
msgid "Running CVS commit..."
msgstr "正在執行 CVS 提交..."
#: components/cvsservice/cvsservice.cpp:301
msgid "Reverting to the version from the repository..."
msgstr "正在還原成倉庫中的版本..."
#: components/cvsservice/cvsservice.cpp:333
msgid "Add the following files to repository?"
msgstr "把下列的檔案加入至倉庫嗎?"
#: components/cvsservice/cvsservice.cpp:333
msgid "CVS Add"
msgstr "CVS 加入"
#: components/cvsservice/cvsservice.cpp:336
msgid "Adding file to the repository..."
msgstr "正在加入檔案至倉庫..."
#: components/cvsservice/cvsservice.cpp:368
msgid ""
"<qt>Remove the following files from the repository?"
"<br>This will remove your <b>working copy</b> as well.</qt>"
msgstr "<qt>要從倉庫移除下列的檔案嗎?<br>這樣做也會移除您的<b>工作拷貝</b>。</qt>"
#: components/cvsservice/cvsservice.cpp:368
msgid "CVS Remove"
msgstr "CVS 移除"
#: components/cvsservice/cvsservice.cpp:371
msgid "Removing files from the repository..."
msgstr "正在從倉庫移除檔案..."
#: components/cvsservice/cvsservice.cpp:395
msgid "Showing CVS log..."
msgstr "正在顯示 CVS 記錄..."
#: components/cvsservice/cvsservice.cpp:433
msgid "\"%1\" is already in the CVS ignore list."
msgstr "\"%1\" 已存在於 CVS 忽略列表中。"
#: components/cvsservice/cvsservice.cpp:441
msgid "\"%1\" added to the CVS ignore list."
msgstr "\"%1\" 已加入至 CVS 忽略列表。"
#: components/cvsservice/cvsservice.cpp:480
msgid "\"%1\" is not in the CVS ignore list."
msgstr "\"%1\" 不在 CVS 忽略列表中。"
#: components/cvsservice/cvsservice.cpp:489
msgid "\"%1\" removed from the CVS ignore list."
msgstr "\"%1\" 已從 CVS 忽略列表中移除。"
#: components/cvsservice/cvsservice.cpp:504
msgid ""
"<qt>The CVS command <b>%1</b> has failed. The error code was <i>%2</i>.</qt>"
msgstr "<qt>CVS 指令 <b>%1</b> 失敗。錯誤碼為 <i>%2</i>。</qt>"
#: components/cvsservice/cvsservice.cpp:504
msgid "Command Failed"
msgstr "指令失敗"
#: components/cvsservice/cvsservice.cpp:515
msgid "CVS command finished."
msgstr "CVS 指令已完成。"
#: components/cvsservice/cvsservice.cpp:532
msgid ""
"Error: \"%1\" is not part of the\n"
"\"%2\" repository."
msgstr ""
"錯誤: \"%1\" 並不屬於\n"
"\"%2\" 倉庫。"
#: components/debugger/interfaces/debuggerclient.cpp:46
msgid "The current debugger, %1, does not support the \"%2\" instruction."
msgstr "目前的除錯器 %1 並不支援 \"%2\" 指令。"
#: components/debugger/interfaces/debuggerclient.cpp:46
#: components/debugger/interfaces/debuggerclient.cpp:144
#: components/debugger/interfaces/debuggerclient.cpp:151
#: components/debugger/interfaces/debuggerclient.cpp:157
msgid "Unsupported Debugger Function"
msgstr "不支援的除錯器功能"
#: components/debugger/interfaces/debuggerclient.cpp:59
msgid "Send HTTP Request"
msgstr "送出 HTTP 請求"
#: components/debugger/interfaces/debuggerclient.cpp:65
msgid "Step Over"
msgstr "逐程序執行"
#: components/debugger/interfaces/debuggerclient.cpp:72
msgid "Step Out"
msgstr "逐步跳出"
#: components/debugger/interfaces/debuggerclient.cpp:89
msgid "Skip"
msgstr "跳過"
#: components/debugger/interfaces/debuggerclient.cpp:94
msgid "Step Into"
msgstr "逐步執行"
#: components/debugger/debuggermanager.cpp:251
#: components/debugger/interfaces/debuggerclient.cpp:99
msgid "Kill"
msgstr "強制中止"
#: components/debugger/debuggermanager.cpp:273
#: components/debugger/interfaces/debuggerclient.cpp:106
msgid "Open Profiler Output"
msgstr "開啟 Profiler 輸出"
#: components/debugger/interfaces/debuggerclient.cpp:118
msgid "Set Breakpoint"
msgstr "設定中斷點"
#: components/debugger/interfaces/debuggerclient.cpp:125
msgid "Remove Breakpoint"
msgstr "移除中斷點"
#: components/debugger/interfaces/debuggerclient.cpp:132
msgid "%1 does not have any specific settings."
msgstr "%1 沒有任何相關設定。"
#: components/debugger/interfaces/debuggerclient.cpp:132
msgid "Settings"
msgstr "設定"
#: components/debugger/interfaces/debuggerclient.cpp:144
#: components/debugger/interfaces/debuggerclient.cpp:151
msgid "%1 does not support watches."
msgstr "%1 並不支援監視器。"
#: components/debugger/interfaces/debuggerclient.cpp:157
msgid "%1 does not support setting the value of variables."
msgstr "%1 並不支援設定變數的數值。"
#: components/debugger/dbgp/quantadebuggerdbgp.cpp:330
msgid "Unrecognized package: '%1%2'"
msgstr "無法識別的套件包:'%1%2'"
#: components/debugger/dbgp/quantadebuggerdbgp.cpp:342
msgid "The debugger for %1 uses an unsupported protocol version (%2)"
msgstr "%1 的除錯器正在使用不被支援的協定版本 (%2)"
#: components/debugger/dbgp/quantadebuggerdbgp.cpp:870
#: components/debugger/dbgp/quantadebuggerdbgp.cpp:872
msgid "Unable to open profiler output (%1)"
msgstr "無法開啟 Profiler 輸出(%1)"
#: components/debugger/dbgp/quantadebuggerdbgp.cpp:870
msgid "Profiler File Error"
msgstr "Profiler 檔案錯誤"
#: components/debugger/dbgp/quantadebuggerdbgp.cpp:926
msgid "Unable to set value of variable."
msgstr "無法設定變數的數值。"
#: components/debugger/dbgp/dbgpnetwork.cpp:74
#, c-format
msgid "Listening on port %1"
msgstr "正在監聽連接埠 %1"
#: components/debugger/dbgp/dbgpnetwork.cpp:81
#, c-format
msgid "Unable to listen on port %1"
msgstr "無法監聽連接埠 %1"
#: components/debugger/dbgp/dbgpnetwork.cpp:125
msgid "Disconnected from remote host"
msgstr ""
#: components/debugger/gubed/quantadebuggergubed.cpp:465
msgid "Syntax or parse error in %1)"
msgstr "語法/解析錯誤於 %1"
#: components/debugger/gubed/quantadebuggergubed.cpp:482
msgid "Error occurred: Line %1, Code %2 (%3) in %4"
msgstr "發生錯誤:行 %1代碼 %2 (%3) 於 %4"
#: components/debugger/gubed/quantadebuggergubed.cpp:502
msgid "Breakpoint reached"
msgstr "到達中斷點"
#: components/debugger/gubed/quantadebuggergubed.cpp:509
msgid "Conditional breakpoint fulfilled"
msgstr "條件中斷已符合"
#: components/debugger/gubed/quantadebuggergubed.cpp:519
#, c-format
msgid "Established connection to %1"
msgstr "已建立到 %1 的連線"
#: components/debugger/gubed/quantadebuggergubed.cpp:560
msgid ""
"The script being debugged does not communicate with the correct protocol "
"version"
msgstr ""
#: components/debugger/gubed/quantadebuggergubed.cpp:1136
msgid "False"
msgstr "假"
#: components/debugger/gubed/quantadebuggergubed.cpp:1136
msgid "True"
msgstr "真"
#: components/debugger/gubed/quantadebuggergubed.cpp:1145
#: components/debugger/gubed/quantadebuggergubed.cpp:1230
msgid "<Undefined>"
msgstr "<未定義>"
#: components/debugger/gubed/quantadebuggergubed.cpp:1234
msgid "<Error>"
msgstr "<錯誤>"
#: components/debugger/gubed/quantadebuggergubed.cpp:1239
msgid "<Unimplemented type>"
msgstr "<未實作類型>"
#: components/debugger/debuggerbreakpointview.cpp:64
#: components/debugger/variableslistview.cpp:56
#: treeviews/tagattributetree.cpp:228
msgid "Value"
msgstr "數值"
#: components/debugger/variableslistview.cpp:58
#: treeviews/uploadtreeview.cpp:37
msgid "Size"
msgstr "大小"
#: components/debugger/variableslistview.cpp:66
msgid "&Set Value"
msgstr "設定數值(&S)"
#: components/debugger/variableslistview.cpp:68
#, fuzzy
msgid "&Dump in Messages Log"
msgstr "警告訊息(&W)"
#: components/debugger/variableslistview.cpp:70
msgid "&Copy to Clipboard"
msgstr "複製到剪貼薄(&C)"
#: components/debugger/variableslistview.cpp:262
msgid "Set Variable"
msgstr "設定變數"
#: components/debugger/variableslistview.cpp:277
msgid ""
"Contents of variable %1:\n"
">>>\n"
msgstr ""
"變數 %1 的內容:\n"
">>>\n"
#: components/debugger/debuggermanager.cpp:111 project/projectprivate.cpp:1535
msgid ""
"<qt>Unable to load the debugger plugin, error code %1 was returned: <b>%2</b>"
".</qt>"
msgstr "<qt>無法載入除錯誤外掛程式,傳回錯誤碼 %1 : <b>%2</b>。</qt>"
#: components/debugger/debuggermanager.cpp:111 project/projectprivate.cpp:1535
msgid "Debugger Error"
msgstr "除錯器錯誤"
#: components/debugger/debuggermanager.cpp:215
msgid "Toggle &Breakpoint"
msgstr "切換中斷點狀態(&B)"
#: components/debugger/debuggermanager.cpp:216
msgid "Toggles a breakpoint at the current cursor location"
msgstr "在目前游標位置切換中斷點狀態"
#: components/debugger/debuggermanager.cpp:218
msgid "&Clear Breakpoints"
msgstr "清除中斷點(&C)"
#: components/debugger/debuggermanager.cpp:219
msgid "Clears all breakpoints"
msgstr "清除所有中斷點"
#: components/debugger/debuggermanager.cpp:221
#: components/debugger/debuggermanager.cpp:224
msgid "Break When..."
msgstr "中斷條件..."
#: components/debugger/debuggermanager.cpp:222
#: components/debugger/debuggermanager.cpp:225
msgid "Adds a new conditional breakpoint"
msgstr "新增一個條件中斷"
#: components/debugger/debuggermanager.cpp:228
msgid "Send HTTP R&equest"
msgstr "傳送 HTTP 請求(&E)"
#: components/debugger/debuggermanager.cpp:229
msgid "Initiate HTTP Request to the server with debugging activated"
msgstr ""
#: components/debugger/debuggermanager.cpp:231
msgid "&Trace"
msgstr "追蹤(&T)"
#: components/debugger/debuggermanager.cpp:232
msgid ""
"Traces through the script. If a script is currently not being debugged, it will "
"start in trace mode when started"
msgstr ""
#: components/debugger/debuggermanager.cpp:234
msgid "&Run"
msgstr "執行(&R)"
#: components/debugger/debuggermanager.cpp:235
msgid ""
"Runs the script. If a script is currently not being debugged, it will start in "
"run mode when started"
msgstr ""
#: components/debugger/debuggermanager.cpp:237
msgid "&Step"
msgstr "逐程序執行(&S)"
#: components/debugger/debuggermanager.cpp:238
msgid ""
"Executes the next line of execution, but does not step into functions or "
"includes"
msgstr ""
#: components/debugger/debuggermanager.cpp:240
msgid "Step &Into"
msgstr "逐步執行(&I)"
#: components/debugger/debuggermanager.cpp:241
msgid ""
"Executes the next line of execution and steps into it if it is a function call "
"or inclusion of a file"
msgstr ""
#: components/debugger/debuggermanager.cpp:243
msgid "S&kip"
msgstr "跳過(&K)"
#: components/debugger/debuggermanager.cpp:244
msgid ""
"Skips the next command of execution and makes the next command the current one"
msgstr ""
#: components/debugger/debuggermanager.cpp:246
msgid "Step &Out"
msgstr "逐步跳出(&O)"
#: components/debugger/debuggermanager.cpp:247
msgid ""
"Executes the rest of the commands in the current function/file and pauses when "
"it is done (when it reaches a higher level in the backtrace)"
msgstr ""
#: components/debugger/debuggermanager.cpp:249
msgid "&Pause"
msgstr "暫停(&P)"
#: components/debugger/debuggermanager.cpp:250
msgid ""
"Pauses the scripts if it is running or tracing. If a script is currently not "
"being debugged, it will start in paused mode when started"
msgstr ""
#: components/debugger/debuggermanager.cpp:252
msgid "Kills the currently running script"
msgstr "強制中止正在執行的指令稿"
#: components/debugger/debuggermanager.cpp:254
msgid "Start Session"
msgstr "開始工作階段"
#: components/debugger/debuggermanager.cpp:255
msgid "Starts the debugger internally (Makes debugging possible)"
msgstr "內部啟動除錯器(啟動除錯功能)"
#: components/debugger/debuggermanager.cpp:257
msgid "End Session"
msgstr "結束工作階段"
#: components/debugger/debuggermanager.cpp:258
msgid "Stops the debugger internally (debugging not longer possible)"
msgstr "內部停止除錯器(除錯功能再不可使用)"
#: components/debugger/debuggermanager.cpp:261
#: components/debugger/debuggermanager.cpp:264
msgid "Watch Variable"
msgstr "監視變數"
#: components/debugger/debuggermanager.cpp:262
#: components/debugger/debuggermanager.cpp:265
msgid "Adds a variable to the watch list"
msgstr "加入一個變數至監視列表中"
#: components/debugger/debuggermanager.cpp:268
#: components/debugger/debuggermanager.cpp:271
msgid "Changes the value of a variable"
msgstr "改變一個變數的數值"
#: components/debugger/debuggermanager.cpp:274
msgid "Opens the profiler output file"
msgstr "開啟 Profiler 的輸出檔案"
#: components/debugger/debuggermanager.cpp:375
msgid "Add Watch"
msgstr "加入監視器"
#: components/debugger/debuggermanager.cpp:375
msgid "Specify variable to watch:"
msgstr "請指定要監視的變數:"
#: components/debugger/debuggermanager.cpp:608
msgid "Unable to open file %1, check your basedirs and mappings."
msgstr ""
#: components/debugger/debuggervariable.cpp:109
msgid "Non scalar value"
msgstr ""
#: components/debugger/debuggervariable.cpp:154
msgid "Array"
msgstr "陣列"
#: components/debugger/debuggervariable.cpp:156
msgid "Object"
msgstr "物件"
#: components/debugger/debuggervariable.cpp:158
msgid "Reference"
msgstr "參考"
#: components/debugger/debuggervariable.cpp:160
msgid "Resource"
msgstr "資源"
#: components/debugger/debuggervariable.cpp:162
msgid "String"
msgstr "字串"
#: components/debugger/debuggervariable.cpp:164
msgid "Integer"
msgstr "整數"
#: components/debugger/debuggervariable.cpp:166
msgid "Float"
msgstr "浮點數"
#: components/debugger/debuggervariable.cpp:168
msgid "Boolean"
msgstr "布林型態"
#: components/debugger/debuggervariable.cpp:170
msgid "Undefined"
msgstr "未定義"
#: components/debugger/debuggervariable.cpp:174 parsers/dtd/dtdparser.cpp:84
msgid "Unknown"
msgstr "未知"
#: components/debugger/backtracelistview.cpp:60
#: components/debugger/debuggerbreakpointview.cpp:63
#, fuzzy
msgid "Line"
msgstr "列表"
#: components/debugger/backtracelistview.cpp:87
#, fuzzy
msgid "Eval"
msgstr "表格"
#: components/debugger/debuggerui.cpp:46
msgid "Variables"
msgstr "變數"
#: components/debugger/debuggerui.cpp:52
msgid "Breakpoints"
msgstr "中斷點"
#: components/debugger/debuggerui.cpp:58
msgid "Backtrace"
msgstr "回溯追蹤"
#: components/debugger/debuggerui.cpp:65
msgid "Debug Output"
msgstr "除錯器輸出"
#: components/debugger/debuggerui.cpp:107
msgid "Deb&ug"
msgstr "除錯(&U)"
#: components/debugger/debuggerui.cpp:113
msgid "Debugger Inactive"
msgstr "除錯器非在作用中"
#: components/debugger/debuggerui.cpp:156
#, fuzzy
msgid "No session"
msgstr "正規表示法"
#: components/debugger/debuggerui.cpp:160
msgid "Waiting"
msgstr "等待中"
#: components/debugger/debuggerui.cpp:164
msgid "Connected"
msgstr "已連接"
#: components/debugger/debuggerui.cpp:168
msgid "Paused"
msgstr "已暫停"
#: components/debugger/debuggerui.cpp:172
msgid "Running"
msgstr "正在執行"
#: components/debugger/debuggerui.cpp:176
msgid "Tracing"
msgstr "正在追蹤"
#: components/debugger/debuggerui.cpp:180
msgid "On error"
msgstr "發生錯誤時"
#: components/debugger/debuggerui.cpp:184
msgid "On breakpoint"
msgstr "到達中斷點時"
#: components/debugger/debuggerbreakpointview.cpp:59
msgid "Expression"
msgstr "正規表示式"
#: components/tableeditor/tableeditor.cpp:55
msgid "&Edit Cell Properties"
msgstr "編輯儲存格屬性(&R)"
#: components/tableeditor/tableeditor.cpp:56
msgid "Edit &Row Properties"
msgstr "編輯列屬性(&R)"
#: components/tableeditor/tableeditor.cpp:59
msgid "Merge Cells"
msgstr "合併儲存格"
#: components/tableeditor/tableeditor.cpp:60
msgid "Break Merging"
msgstr "解除合併"
#: components/tableeditor/tableeditor.cpp:63
msgid "&Insert Row"
msgstr "插入新列(&I)"
#: components/tableeditor/tableeditor.cpp:64
msgid "Insert Co&lumn"
msgstr "插入新欄(&L)"
#: components/tableeditor/tableeditor.cpp:65
msgid "Remove Row"
msgstr "移除這一列"
#: components/tableeditor/tableeditor.cpp:66
msgid "Remove Column"
msgstr "移除這一欄"
#: components/tableeditor/tableeditor.cpp:68
msgid "Edit &Table Properties"
msgstr "編輯表格屬性(&T)"
#: components/tableeditor/tableeditor.cpp:69
msgid "Edit Child Table"
msgstr "編輯子表格"
#: components/tableeditor/tableeditor.cpp:207
#, c-format
msgid "Edit col: %1"
msgstr "編輯欄:%1"
#: components/tableeditor/tableeditor.cpp:414
#: components/tableeditor/tableeditor.cpp:454
#: components/tableeditor/tableeditor.cpp:499
#: components/tableeditor/tableeditor.cpp:1063
msgid "Merged with (%1, %2)."
msgstr "已跟 (%1, %2) 合併。"
#: components/tableeditor/tableeditor.cpp:1168
#: components/tableeditor/tableeditor.cpp:1189
msgid ""
"Cannot edit the child table; you probably modified the cell containing the "
"table manually."
msgstr ""
#: components/tableeditor/tableeditor.cpp:1204
msgid ""
"Cannot find the closing tag of the child table; you have probably introduced "
"unclosed tags in the table and have broken its consistency."
msgstr ""
#: treeviews/filestreeview.cpp:87 treeviews/projecttreeview.cpp:128
#: treeviews/servertreeview.cpp:103 treeviews/templatestreeview.cpp:147
msgid "&Open"
msgstr "開啟(&O)"
#: treeviews/filestreeview.cpp:88 treeviews/projecttreeview.cpp:130
msgid "Insert &Tag"
msgstr "插入標籤(&T)"
#: treeviews/filestreeview.cpp:89 treeviews/projecttreeview.cpp:131
#: treeviews/servertreeview.cpp:105 treeviews/templatestreeview.cpp:151
msgid "Clos&e"
msgstr "關閉(&E)"
#: treeviews/filestreeview.cpp:91 treeviews/filestreeview.cpp:109
#: treeviews/templatestreeview.cpp:150 treeviews/templatestreeview.cpp:164
msgid "&Insert in Project..."
msgstr " 在專案中插入(&I)..."
#: treeviews/filestreeview.cpp:93 treeviews/filestreeview.cpp:113
#: treeviews/projecttreeview.cpp:135 treeviews/projecttreeview.cpp:153
#: treeviews/servertreeview.cpp:110 treeviews/servertreeview.cpp:120
msgid "Re&name"
msgstr "重新命名(&N)"
#: treeviews/filestreeview.cpp:96 treeviews/filestreeview.cpp:116
#: treeviews/projecttreeview.cpp:140 treeviews/projecttreeview.cpp:159
#: treeviews/servertreeview.cpp:112 treeviews/servertreeview.cpp:122
#: treeviews/templatestreeview.cpp:156 treeviews/templatestreeview.cpp:170
msgid "&Properties"
msgstr "屬性(&P)"
#: treeviews/filestreeview.cpp:99 treeviews/projecttreeview.cpp:143
msgid "F&older..."
msgstr "資料夾(&O)..."
#: treeviews/filestreeview.cpp:100 treeviews/projecttreeview.cpp:144
msgid "&File..."
msgstr "檔案(&F)..."
#: treeviews/filestreeview.cpp:104 treeviews/filestreeview.cpp:121
msgid "New Top &Folder..."
msgstr "新增最上層資料夾(&F)..."
#: treeviews/filestreeview.cpp:105 treeviews/filestreeview.cpp:228
msgid "&Add Folder to Top"
msgstr "加入資料夾到最上層(&A)"
#: treeviews/filestreeview.cpp:106 treeviews/projecttreeview.cpp:152
msgid "Create Site &Template..."
msgstr "建立網站範本(&T)..."
#: treeviews/filestreeview.cpp:107 treeviews/projecttreeview.cpp:148
#: treeviews/projecttreeview.cpp:162
msgid "&Create New"
msgstr "新增(&C)"
#: treeviews/filestreeview.cpp:112
#, fuzzy
msgid "&Change Alias..."
msgstr "讀入..."
#: treeviews/filestreeview.cpp:123
msgid "Files Tree"
msgstr "檔案樹狀"
#: treeviews/filestreeview.cpp:153
msgid "Root Folder"
msgstr "根目錄"
#: treeviews/filestreeview.cpp:158
msgid "Home Folder"
msgstr "家目錄"
#: treeviews/filestreeview.cpp:216
msgid "Remove From &Top"
msgstr "自最上層移除(&T)"
#: treeviews/filestreeview.cpp:258 treeviews/filestreeview.cpp:283
#, fuzzy
msgid "Set Alias"
msgstr "選擇全部"
#: treeviews/filestreeview.cpp:258 treeviews/filestreeview.cpp:283
#: treeviews/filestreeview.cpp:319
msgid "Alternative folder name:"
msgstr "替代目錄名稱:"
#: treeviews/filestreeview.cpp:264 treeviews/filestreeview.cpp:290
#: treeviews/filestreeview.cpp:327
msgid "<qt><b>%1</b> is already a toplevel entry.</qt>"
msgstr "<qt><b>%1</b> 已經是最上層的項目。</qt>"
#: treeviews/filestreeview.cpp:277
msgid "Choose Local or Remote Folder"
msgstr "選擇本地或遠端的目錄"
#: treeviews/filestreeview.cpp:299 treeviews/filestreeview.cpp:301
#: treeviews/projecttreeview.cpp:653 treeviews/projecttreeview.cpp:655
#: treeviews/projecttreeview.cpp:657
msgid "C&VS"
msgstr "C&VS"
#: treeviews/filestreeview.cpp:319
#, fuzzy
msgid "Change Alias"
msgstr "讀入..."
#: treeviews/structtreetag.cpp:119
msgid ""
"Line %1: %2 is not a possible child of %3.\n"
msgstr ""
"行 %1%2 不可能是 %3 其中一個子標籤。\n"
#: treeviews/structtreetag.cpp:132
msgid "Line %1, column %2: Closing tag for %3 is missing."
msgstr "行 %1, 字 %2找不到 %3 的結束標籤"
#: treeviews/structtreetag.cpp:137
msgid "Line %1, column %2: %3 is not part of %4."
msgstr "行 %1, 字 %2%3 不是 %4 的一部份。"
#: treeviews/structtreetag.cpp:164
msgid "Empty tag"
msgstr "空標籤"
#: treeviews/structtreetag.cpp:185
msgid "Line %1, column %2: Opening tag for %3 is missing."
msgstr "行 %1, 字 %2找不到 %3 的開始標籤"
#: treeviews/templatestreeview.cpp:73
msgid "Insert as &Text"
msgstr "插入成文字(&T)"
#: treeviews/templatestreeview.cpp:74
msgid "Insert &Link to File"
msgstr "插入這項的連結到檔案中(&L)"
#: treeviews/templatestreeview.cpp:75
msgid "&New Document Based on This"
msgstr "新增文件並以此基礎(&N)"
#: treeviews/templatestreeview.cpp:76
msgid "&Extract Site Template To..."
msgstr "解壓縮網站範本至(&E)..."
#: treeviews/templatestreeview.cpp:135 treeviews/templatestreeview.cpp:139
msgid "Text Snippet"
msgstr "文字片段"
#: treeviews/templatestreeview.cpp:136 treeviews/templatestreeview.cpp:140
msgid "Binary File"
msgstr "二進制檔案"
#: treeviews/templatestreeview.cpp:137 treeviews/templatestreeview.cpp:141
msgid "Document Template"
msgstr "文件範本"
#: treeviews/templatestreeview.cpp:138 treeviews/templatestreeview.cpp:142
msgid "Site Template"
msgstr "網站範本"
#: treeviews/templatestreeview.cpp:148 treeviews/templatestreeview.cpp:161
msgid "Send in E&mail..."
msgstr "以 E&mail 傳送..."
#: treeviews/templatestreeview.cpp:149 treeviews/templatestreeview.cpp:162
msgid "&Upload Template..."
msgstr "上傳範本(&U)..."
#: treeviews/templatestreeview.cpp:160
msgid "&New Folder..."
msgstr "新增資料夾(&N)..."
#: treeviews/templatestreeview.cpp:163 treeviews/templatestreeview.cpp:174
msgid "&Download Template..."
msgstr "下載範本(&D)..."
#: treeviews/templatestreeview.cpp:177
msgid "Group"
msgstr "組別"
#: treeviews/templatestreeview.cpp:211
msgid "Global Templates"
msgstr "全域範本"
#: treeviews/templatestreeview.cpp:215
msgid "Local Templates"
msgstr "本地範本"
#: treeviews/templatestreeview.cpp:218
msgid "Project Templates"
msgstr "專案範本"
#: treeviews/templatestreeview.cpp:376
msgid "Create New Template Folder"
msgstr "建立新的範本目錄"
#: treeviews/templatestreeview.cpp:386 treeviews/templatestreeview.cpp:619
msgid "&Inherit parent attribute (nothing)"
msgstr "繼承上層的屬性(無屬性)(&I)"
#: treeviews/templatestreeview.cpp:389 treeviews/templatestreeview.cpp:622
msgid "&Inherit parent attribute (%1)"
msgstr "繼承上層的屬性(%1)(&I)"
#: treeviews/templatestreeview.cpp:406
msgid ""
"Error while creating the new folder.\n"
" Maybe you do not have permission to write in the %1 folder."
msgstr ""
"建立新目錄時發生錯誤。\n"
" 可能您沒有足夠的權限在 %1 目錄裏進行寫入。"
#: treeviews/templatestreeview.cpp:458
msgid "Save selection as template file:"
msgstr "儲存選取的作為範本:"
#: treeviews/basetreeview.cpp:1041 treeviews/templatestreeview.cpp:470
#: utility/quantacommon.cpp:710
msgid ""
"<qt>The file <b>%1</b> already exists."
"<br>Do you want to overwrite it?</qt>"
msgstr "<qt>檔案 <b>%1</b> 已經存在。<br>您要覆寫它嗎</qt>"
#: treeviews/templatestreeview.cpp:476
msgid ""
"<qt>Could not write to file <b>%1</b>."
"<br>Check if you have rights to write there or that your connection is "
"working.</qt>"
msgstr "<qt>無法寫入到檔案 <b>%1</b>。<br>請檢查一下您有沒有足夠的權限在那裏進行寫入,或連線有無發生問題。</qt>"
#: treeviews/templatestreeview.cpp:565
msgid "Quanta Template"
msgstr "Quanta 範本"
#: treeviews/templatestreeview.cpp:876
msgid ""
"Do you really want to delete folder \n"
"%1 ?\n"
msgstr ""
"您真的要刪除目錄 \n"
"%1 ?\n"
#: treeviews/templatestreeview.cpp:878
msgid ""
"Do you really want to delete file \n"
"%1 ?\n"
msgstr ""
"您真的要刪除檔案 \n"
"%1 ?\n"
#: treeviews/templatestreeview.cpp:985
msgid "Send template in email"
msgstr "以 Email 傳送範本"
#: treeviews/templatestreeview.cpp:987
msgid ""
"Hi,\n"
" This is a Quanta Plus [http://quanta.tdewebdev.org] template tarball.\n"
"\n"
"Have fun.\n"
msgstr ""
"您好,\n"
" 這個是一個 Quanta Plus [http://quanta.sourceforge.net] 範本。\n"
"\n"
"Have fun.\n"
#: treeviews/templatestreeview.cpp:1000
msgid "Quanta Plus Template"
msgstr "Quanta Plus 範本"
#: treeviews/templatestreeview.cpp:1031
msgid "Target folder"
msgstr "目的地目錄"
#: treeviews/templatestreeview.cpp:1067
msgid ""
"You have extracted the site template to a folder which is not under your main "
"project folder.\n"
"Do you want to copy the folder into the main project folder?"
msgstr ""
#: treeviews/templatestreeview.cpp:1067
msgid "Copy Folder"
msgstr "複製目錄"
#: treeviews/templatestreeview.cpp:1067
msgid "Do Not Copy"
msgstr "不要複製"
#: treeviews/templatestreeview.cpp:1075
msgid ""
"<qt>Some error happened while extracting the <i>%1</i> site template file."
"<br>Check that you have write permission for <i>%2</i> "
"and that there is enough free space in your temporary folder.</qt>"
msgstr ""
#: treeviews/basetreeview.cpp:630 treeviews/servertreeview.cpp:104
msgid "Open &With..."
msgstr "開啟用(&W)..."
#: treeviews/servertreeview.cpp:125
msgid "Upload Tree"
msgstr "上傳樹狀"
#: treeviews/scripttreeview.cpp:73
msgid "Global Scripts"
msgstr "全域指令稿"
#: treeviews/scripttreeview.cpp:79
msgid "Local Scripts"
msgstr "本地指令稿"
#: treeviews/scripttreeview.cpp:88
msgid "&Description"
msgstr "描述(&D)"
#: treeviews/scripttreeview.cpp:89
msgid "&Run Script"
msgstr "執行指令稿(&R)"
#: treeviews/scripttreeview.cpp:91
msgid "&Edit Script"
msgstr "編輯指令稿(&E)"
#: treeviews/scripttreeview.cpp:92
msgid "Edit in &Quanta"
msgstr "以 &Quanta 編輯"
#: treeviews/scripttreeview.cpp:93
msgid "Edi&t Description"
msgstr "編輯描述(&T)"
#: treeviews/scripttreeview.cpp:95
msgid "&Assign Action"
msgstr "指定動作(&A)"
#: treeviews/scripttreeview.cpp:96
msgid "&Send in Email..."
msgstr "以 Email 傳送(&S)..."
#: treeviews/scripttreeview.cpp:97
msgid "&Upload Script..."
msgstr "上傳指令稿(&U)..."
#: treeviews/scripttreeview.cpp:100
msgid "&Download Script..."
msgstr "下載指令稿(&D)..."
#: treeviews/scripttreeview.cpp:273
msgid "Send script in email"
msgstr "以 Email 傳送指令稿(&S)..."
#: treeviews/scripttreeview.cpp:275
msgid ""
"Hi,\n"
" This is a Quanta Plus [http://quanta.tdewebdev.org] script tarball.\n"
"\n"
"Have fun.\n"
msgstr ""
"您好,\n"
" 這個是一個 Quanta Plus [http://quanta.sourceforge.net] 指令稿的tarball.\n"
"\n"
"Have fun.\n"
#: treeviews/scripttreeview.cpp:288
msgid "Quanta Plus Script"
msgstr "Quanta Plus 指令稿"
#: project/projectupload.cpp:762 treeviews/uploadtreeview.cpp:36
msgid "Upload"
msgstr "上傳"
#: treeviews/uploadtreeview.cpp:38
msgid "Date"
msgstr "日期"
#: treeviews/basetreeview.cpp:438
msgid "Quanta File Info"
msgstr "Quanta 檔案資訊"
#: treeviews/basetreeview.cpp:497
#, c-format
msgid "Number of lines: %1"
msgstr "行數:%1"
#: treeviews/basetreeview.cpp:498
#, c-format
msgid "Number of images included: %1"
msgstr "包含的圖片數目:%1"
#: treeviews/basetreeview.cpp:499
msgid "Size of the included images: %1 bytes"
msgstr "包含圖片的檔案大小: %1 bytes"
#: treeviews/basetreeview.cpp:500
msgid "Total size with images: %1 bytes"
msgstr "連圖片的總檔案大小:%1 bytes"
#: treeviews/basetreeview.cpp:505
msgid "Image size: %1 x %2"
msgstr "圖片大小:%1 x %2"
#: treeviews/basetreeview.cpp:627
msgid "&Other..."
msgstr "其他(&O)..."
#: treeviews/basetreeview.cpp:628
msgid "Open &With"
msgstr "開啟用(&W)"
#: treeviews/basetreeview.cpp:885 treeviews/structtreeview.cpp:832
msgid "&Move Here"
msgstr "移至這裏(&M)"
#: treeviews/basetreeview.cpp:887 treeviews/structtreeview.cpp:833
msgid "&Copy Here"
msgstr "複製這裏(&C)"
#: treeviews/basetreeview.cpp:889
msgid "&Link Here"
msgstr "連結這裏(&L)"
#: treeviews/basetreeview.cpp:891 treeviews/structtreeview.cpp:835
msgid "C&ancel"
msgstr "取消(&A)"
#: treeviews/basetreeview.cpp:1135
msgid "Create Site Template File"
msgstr "建立站點範本檔案"
#: treeviews/basetreeview.cpp:1143
msgid "Templates should be saved to the local or project template folder."
msgstr ""
#: treeviews/basetreeview.cpp:1151
msgid "Currently you can create site templates only from local folders."
msgstr ""
#: treeviews/basetreeview.cpp:1151
msgid "Unsupported Feature"
msgstr "未支援的功能"
#: treeviews/basetreeview.cpp:1187
msgid ""
"<qt>There was an error while creating the site template tarball."
"<br>Check that you can read the files from <i>%1</i>"
", you have write access to <i>%2</i> and that you have enough free space in "
"your temporary folder.</qt>"
msgstr ""
#: treeviews/basetreeview.cpp:1194 treeviews/projecttreeview.cpp:375
msgid "Create New Folder"
msgstr "建立新的目錄"
#: treeviews/basetreeview.cpp:1194 treeviews/projecttreeview.cpp:375
msgid "Folder name:"
msgstr "目錄名稱:"
#: treeviews/basetreeview.cpp:1209 treeviews/projecttreeview.cpp:393
msgid "Create New File"
msgstr "新增文件"
#: treeviews/basetreeview.cpp:1219 treeviews/projecttreeview.cpp:403
msgid ""
"<qt>Cannot create file, because a file named <b>%1</b> already exists.</qt>"
msgstr "<qt>無法建立檔案,因為檔案 <b>%1</b> 早已存在。</qt>"
#: treeviews/basetreeview.cpp:1219 treeviews/projecttreeview.cpp:403
msgid "Error Creating File"
msgstr "建立檔案時發生錯誤"
#: treeviews/doctreeview.cpp:54
msgid "Project Documentation"
msgstr "專案文件"
#: treeviews/doctreeview.cpp:65
msgid "&Download Documentation..."
msgstr "下載文件(&D)..."
#: treeviews/tagattributetree.cpp:227
msgid "Attribute Name"
msgstr "標籤屬性的名稱"
#: treeviews/tagattributetree.cpp:270
msgid "Parent tags"
msgstr "母標籤"
#: treeviews/tagattributetree.cpp:289
msgid "Namespace"
msgstr "名稱空間"
#: treeviews/tagattributetree.cpp:290
msgid "prefix"
msgstr "前綴"
#: treeviews/tagattributetree.cpp:464
msgid "Node Name"
msgstr "結(Node)名稱"
#: treeviews/tagattributetree.cpp:468
msgid "Delete Tag"
msgstr "刪除標籤"
#: treeviews/tagattributetree.cpp:472
msgid "Delete the current tag only."
msgstr "只刪除目前的標籤。"
#: treeviews/tagattributetree.cpp:478
msgid "Delete the current tag and all its children."
msgstr "刪除目前的標籤及它所有的子標籤。"
#: treeviews/tagattributetree.cpp:518
msgid "Current tag: <b>%1</b>"
msgstr "目前的標籤:<b>%1</b>"
#: treeviews/tagattributetree.cpp:522
msgid "Current tag: <b>text</b>"
msgstr "目前的標籤:<b>文字</b>"
#: treeviews/tagattributetree.cpp:524
msgid "Current tag: <b>comment</b>"
msgstr "目前的標籤:<b>註解</b>"
#: treeviews/tagattributetree.cpp:526
msgid "Current tag:"
msgstr "目前的標籤:"
#: treeviews/structtreeview.cpp:90
msgid "All Present DTEP"
msgstr ""
#: treeviews/structtreeview.cpp:104 treeviews/structtreeview.cpp:109
msgid "Show Groups For"
msgstr "對此顯示組別"
#: treeviews/structtreeview.cpp:105 treeviews/structtreeview.cpp:122
msgid "&Reparse"
msgstr "再次解析(&R)"
#: treeviews/structtreeview.cpp:115
msgid "Open Subtrees"
msgstr "開啟子樹狀"
#: treeviews/structtreeview.cpp:116
msgid "Close Subtrees"
msgstr "關閉子樹狀"
#: treeviews/structtreeview.cpp:123
msgid "Follow Cursor"
msgstr "跟著游標"
#: treeviews/structtreeview.cpp:487
msgid "Find tag"
msgstr "找尋標籤"
#: treeviews/structtreeview.cpp:504 treeviews/structtreeview.cpp:524
msgid "Find Tag && Open Tree"
msgstr "找尋標籤 && 展開樹狀目錄"
#: treeviews/structtreeview.cpp:521 treeviews/structtreeview.cpp:549
msgid "nothing"
msgstr "無"
#: treeviews/projecttreeview.cpp:62 treeviews/projecttreeview.cpp:65
msgid "Document Base Folder"
msgstr "文件基底目錄"
#: treeviews/projecttreeview.cpp:108
msgid "Project Files"
msgstr "專案檔案"
#: treeviews/projecttreeview.cpp:121
msgid "&When Modified"
msgstr "當修改過時(&W)"
#: treeviews/projecttreeview.cpp:122
msgid "&Never"
msgstr "永不(&N)"
#: treeviews/projecttreeview.cpp:123
msgid "&Confirm"
msgstr "確認(&C)..."
#: treeviews/projecttreeview.cpp:129 utility/newstuff.cpp:73
msgid "Load Toolbar"
msgstr "載入工具列"
#: treeviews/projecttreeview.cpp:133
msgid "&Upload File..."
msgstr "上傳檔案(&U)..."
#: treeviews/projecttreeview.cpp:134
msgid "&Quick File Upload"
msgstr "快速檔案上傳(&Q)"
#: treeviews/projecttreeview.cpp:136 treeviews/projecttreeview.cpp:154
msgid "&Remove From Project"
msgstr "從專案中移除(&R)"
#: treeviews/projecttreeview.cpp:139 treeviews/projecttreeview.cpp:158
#: treeviews/projecttreeview.cpp:169
msgid "Upload &Status"
msgstr "上傳狀況(&S)"
#: treeviews/projecttreeview.cpp:150
msgid "&Upload Folder..."
msgstr "上傳資料夾(&U)..."
#: treeviews/projecttreeview.cpp:151
msgid "&Quick Folder Upload"
msgstr "快速資料夾上傳(&Q)"
#: treeviews/projecttreeview.cpp:157
msgid "Document-&Base Folder"
msgstr "文件基底目錄(&B)"
#: project/projectprivate.cpp:137 treeviews/projecttreeview.cpp:164
msgid "&Upload Project..."
msgstr "上傳專案(&U)..."
#: treeviews/projecttreeview.cpp:165
msgid "Re&scan Project Folder..."
msgstr "重新掃描專案目錄(&R)"
#: treeviews/projecttreeview.cpp:166
msgid "Project &Properties"
msgstr "專案屬性(&P)"
#: treeviews/projecttreeview.cpp:195 treeviews/projecttreeview.cpp:289
msgid "[local disk]"
msgstr "[本地磁碟]"
#: treeviews/projecttreeview.cpp:205 treeviews/projecttreeview.cpp:300
msgid "No Project"
msgstr "沒有專案"
#: treeviews/projecttreeview.cpp:428 utility/quantanetaccess.cpp:210
msgid ""
"<qt>Do you really want to remove "
"<br><b>%1</b>"
"<br> from the project?</qt>"
msgstr "<qt>您真的要從專案中移除 <br><b>%1</b><br> 嗎?</qt>"
#: treeviews/projecttreeview.cpp:428 utility/quantanetaccess.cpp:210
msgid "Remove From Project"
msgstr "從專案中移除"
#: utility/tagactionset.cpp:104
msgid "Apply Source Indentation"
msgstr "執行原始碼縮排"
#: utility/tagactionset.cpp:109
msgid "Copy DIV Area"
msgstr "複製 DIV 區域"
#: utility/tagactionset.cpp:114
msgid "Cut DIV Area"
msgstr "剪下 DIV 區域"
#: utility/tagactionset.cpp:284 utility/tagactionset.cpp:301
msgid "Table..."
msgstr "表格..."
#: utility/tagactionset.cpp:285
msgid "Insert..."
msgstr "插入..."
#: utility/tagactionset.cpp:286
msgid "Remove..."
msgstr "移除..."
#: utility/tagactionset.cpp:307
msgid "Row Above"
msgstr "上面的一列"
#: utility/tagactionset.cpp:313
msgid "Row Below"
msgstr "下面的一列"
#: utility/tagactionset.cpp:319
msgid "Column Left"
msgstr "左面的一欄"
#: utility/tagactionset.cpp:325
msgid "Column Right"
msgstr "右面的一欄"
#: utility/tagactionset.cpp:339
msgid "Row(s)"
msgstr "列"
#: utility/tagactionset.cpp:345
msgid "Column(s)"
msgstr "欄"
#: utility/tagactionset.cpp:351
msgid "Cell(s)"
msgstr "儲存格"
#: utility/tagactionset.cpp:357
msgid "Cell(s) Content"
msgstr "儲存格內容"
#: utility/tagactionset.cpp:365
msgid "Merge Selected Cells"
msgstr "把選取的儲存格合併"
#: utility/tagaction.cpp:464 utility/tagaction.cpp:718
msgid ""
"The \"%1\" script started.\n"
msgstr ""
"\"%1\" 指令稿已啟動。 \n"
#: utility/tagaction.cpp:475 utility/tagaction.cpp:729
msgid ""
"<qt>There was an error running <b>%1</b>."
"<br>Check that you have the <i>%2</i> executable installed and it is "
"accessible.</qt>"
msgstr "<qt>執行<b>%1</b>時發生錯誤。<br>請確定<i>%2</i>執行檔已安裝並且可以被存取。</qt>"
#: utility/tagaction.cpp:475 utility/tagaction.cpp:729
msgid "Script Not Found"
msgstr "找不到指令稿"
#: utility/tagaction.cpp:790 utility/tagaction.cpp:850
msgid ""
"The \"%1\" script output:\n"
msgstr ""
"\"%1\" 指令稿的輸出: \n"
#: utility/tagaction.cpp:973
msgid "The \"%1\" script has exited."
msgstr "\"%1\" 指令稿已退出。"
#: utility/tagaction.cpp:1011
msgid ""
"<qt>The filtering action <b>%1</b> seems to be locked."
"<br>Do you want to terminate it?</qt>"
msgstr "<qt>篩選動作 <b>%1</b> 似乎已當掉了。<br>您要終止它嗎?</qt>"
#: utility/tagaction.cpp:1011
msgid "Action Not Responding"
msgstr "動作不回應"
#: utility/tagaction.cpp:1011
msgid "Terminate"
msgstr "中止"
#: utility/tagaction.cpp:1011
msgid "Keep Running"
msgstr "繼續運作"
#: utility/quantacommon.cpp:384
msgid ""
"<qt>Cannot create folder"
"<br><b>%1</b>."
"<br>Check that you have write permission in the parent folder or that the "
"connection to"
"<br><b>%2</b>"
"<br> is valid.</qt>"
msgstr ""
"<qt>無法建立目錄"
"<br><b>%1</b>。"
"<br>請確定您對它的母目錄擁有寫入權限,或者到"
"<br><b>%2</b>"
"<br>的連線是有效的。</qt>"
#: utility/quantacommon.cpp:697
msgid ""
"The file type is not recognized. Opening binary files may confuse Quanta.\n"
" Are you sure you want to open this file?"
msgstr ""
"無法適別檔案類型。 如果檔案類型是二進制的,有可能會混淆 Quanta 的。\n"
" 您真的要開啟這檔案?"
#: utility/quantacommon.cpp:699
msgid "Unknown Type"
msgstr "未知的類型"
#: project/project.cpp:216 utility/quantacommon.cpp:699
msgid "Do Not Open"
msgstr "不開啟"
#: utility/quantabookmarks.cpp:88
msgid "Set &Bookmark"
msgstr "標記這行(&B)"
#: utility/quantabookmarks.cpp:91
msgid "If a line has no bookmark then add one, otherwise remove it."
msgstr "如果行沒有標記就標記它,反之亦然。"
#: utility/quantabookmarks.cpp:92
msgid "Clear &Bookmark"
msgstr "清除標記(&B)"
#: utility/quantabookmarks.cpp:95
msgid "Clear &All Bookmarks"
msgstr "清除標記(&A)"
#: utility/quantabookmarks.cpp:98
msgid "Remove all bookmarks of the current document."
msgstr "清除目前文件的所有標記。"
#: utility/quantabookmarks.cpp:101 utility/quantabookmarks.cpp:307
msgid "Next Bookmark"
msgstr "下一標記"
#: utility/quantabookmarks.cpp:104
msgid "Go to the next bookmark."
msgstr "前往下一標記。"
#: utility/quantabookmarks.cpp:107 utility/quantabookmarks.cpp:309
msgid "Previous Bookmark"
msgstr "上一標記"
#: utility/quantabookmarks.cpp:110
msgid "Go to the previous bookmark."
msgstr "前往上一標記。"
#: utility/quantabookmarks.cpp:222
msgid "&Next: %1 - \"%2\""
msgstr "下一個:%1 - \"%2\" (&N)"
#: utility/quantabookmarks.cpp:229
msgid "&Previous: %1 - \"%2\""
msgstr "上一個:%1 - \"%2\" (&P)"
#: utility/toolbartabwidget.cpp:45 utility/toolbartabwidget.cpp:188
#: utility/toolbartabwidget.cpp:307
msgid "Toolbar Menu"
msgstr "工具列選單"
#: utility/toolbartabwidget.cpp:46 utility/toolbartabwidget.cpp:309
msgid "New Action..."
msgstr "新的動作..."
#: utility/toolbartabwidget.cpp:48 utility/toolbartabwidget.cpp:326
msgid "New Toolbar..."
msgstr "新的工具列..."
#: utility/toolbartabwidget.cpp:50 utility/toolbartabwidget.cpp:328
msgid "Rename Toolbar..."
msgstr "重新命名的工具列..."
#: utility/toolbartabwidget.cpp:51 utility/toolbartabwidget.cpp:331
msgid "Configure Toolbars..."
msgstr "設定工具列..."
#: utility/toolbartabwidget.cpp:234
msgid "Icons Only"
msgstr "只有圖示"
#: utility/toolbartabwidget.cpp:235
msgid "Text Only"
msgstr "只有文字"
#: utility/toolbartabwidget.cpp:236
msgid "Text Alongside Icons"
msgstr "文字伴圖示"
#: utility/toolbartabwidget.cpp:237
msgid "Text Under Icons"
msgstr "圖示下顯示文字"
#: utility/toolbartabwidget.cpp:320
#, c-format
msgid "Remove Action - %1"
msgstr "移除動作 - %1"
#: utility/toolbartabwidget.cpp:321
#, c-format
msgid "Edit Action - %1"
msgstr "編輯動作 - %1"
#: utility/toolbartabwidget.cpp:330
msgid "Text Position"
msgstr "文字位置"
#: utility/toolbartabwidget.cpp:344
msgid "<qt>Are you sure you want to remove the <b>%1</b> action?</qt>"
msgstr "<qt>您真的要移除 <b>%1</b> 動作嗎?</qt>"
#: utility/newstuff.cpp:53
msgid ""
"There was an error with the downloaded DTEP tarball file. Possible causes are "
"damaged archive or invalid directory structure in the archive."
msgstr "下載的 DTEP 套件包有錯誤。可能它已受損或裡面的目錄結構無效。"
#: utility/newstuff.cpp:53
msgid "DTEP Installation Error"
msgstr "DTEP 安裝錯誤"
#: utility/newstuff.cpp:73
msgid "Do you want to load the newly downloaded toolbar?"
msgstr "您要載入新下載的工具列嗎?"
#: utility/newstuff.cpp:79
msgid ""
"There was an error with the downloaded toolbar tarball file. Possible causes "
"are damaged archive or invalid directory structure in the archive."
msgstr "下載的工具列套件包有錯誤。可能它已受損或裡面的目錄結構無效。"
#: utility/newstuff.cpp:79
msgid "Toolbar Installation Error"
msgstr "工具列安裝錯誤"
#: utility/newstuff.cpp:100
msgid "Do you want to open the newly downloaded template?"
msgstr "您要載入新下載的範本嗎?"
#: utility/newstuff.cpp:100
msgid "Open Template"
msgstr "開啟範本"
#: utility/newstuff.cpp:106
msgid "There was an error with the downloaded template file."
msgstr "下載的範本有錯誤。"
#: utility/newstuff.cpp:106
msgid "Template Installation Error"
msgstr "範本安裝錯誤"
#: utility/newstuff.cpp:124 utility/newstuff.cpp:141
msgid ""
"There was an error with the downloaded script tarball file. Possible causes are "
"damaged archive or invalid directory structure in the archive."
msgstr "下載的指令稿套件包有錯誤。可能它已受損或裡面的目錄結構無效。"
#: utility/newstuff.cpp:124
msgid "Script Installation Error"
msgstr "指令稿安裝錯誤"
#: utility/newstuff.cpp:141
msgid "Documentation Installation Error"
msgstr "文件安裝錯誤"
#: utility/qpevents.cpp:42
msgid "Before Document Save"
msgstr "在文件儲存前"
#: utility/qpevents.cpp:43
msgid "After Document Save"
msgstr "在文件儲存後"
#: utility/qpevents.cpp:44
msgid "After Document Open"
msgstr "在文件儲存開啟後"
#: utility/qpevents.cpp:45
msgid "Before Document Close"
msgstr "在文件儲存關閉前"
#: utility/qpevents.cpp:46
msgid "After Document Close"
msgstr "在文件儲存關閉後"
#: utility/qpevents.cpp:47
msgid "After Project Open"
msgstr "在專案開啟後"
#: utility/qpevents.cpp:48
msgid "Before Project Close"
msgstr "在專案關閉前"
#: utility/qpevents.cpp:49
msgid "After Project Close"
msgstr "在專案關閉後"
#: utility/qpevents.cpp:50
msgid "Upload Requested"
msgstr "要求上傳"
#: utility/qpevents.cpp:51
msgid "Before Document Upload"
msgstr "在文件上傳前"
#: utility/qpevents.cpp:52
msgid "After Document Upload"
msgstr "在文件上傳後"
#: utility/qpevents.cpp:53
msgid "After Addition to Project"
msgstr "在加入至專案後"
#: utility/qpevents.cpp:54
msgid "After Removal From Project"
msgstr "從專案移除後"
#: utility/qpevents.cpp:55
msgid "After Commit to CVS"
msgstr "提交至 CVS 後"
#: utility/qpevents.cpp:56
msgid "After Update From CVS"
msgstr "從 CVS 更新後"
#: utility/qpevents.cpp:57
msgid "After Moving File Inside Project"
msgstr "在專案內移動檔案後"
#: utility/qpevents.cpp:58
msgid "Quanta Start"
msgstr "Quanta 啟動"
#: utility/qpevents.cpp:59
msgid "Quanta Exit"
msgstr "Quanta 結束"
#: utility/qpevents.cpp:62
msgid "Send Email"
msgstr "傳送電子郵件"
#: utility/qpevents.cpp:63
msgid "Log Event"
msgstr "記錄事件"
#: utility/qpevents.cpp:64
msgid "Script Action"
msgstr "指令稿動作"
#: utility/qpevents.cpp:65
msgid "Non-Script Action"
msgstr "非指令稿動作"
#: utility/qpevents.cpp:88
msgid ""
"<qt>An internal action (<i>%1</i>) associated with an event (<i>%2</i>"
") will be executed. Do you want to allow the execution of this action?</qt>"
msgstr "<qt>事件 (<i>%2</i>) 觸發了一個內部的處理動作 (<i>%1</i>)。您要允許這個動作被執行嗎?</qt>"
#: utility/qpevents.cpp:88 utility/qpevents.cpp:92
msgid "Event Triggered"
msgstr "觸發事件"
#: utility/qpevents.cpp:88 utility/qpevents.cpp:92
msgid "Execute"
msgstr "執行"
#: utility/qpevents.cpp:92
msgid ""
"<qt>An external action (<i>%1</i>) associated with an event (<i>%2</i>"
") will be executed. Do you want to allow the execution of this action?</qt>"
msgstr "<qt>事件 (<i>%2</i>) 觸發了一個外部的處理動作 (<i>%1</i>)。您要允許這個動作被執行嗎?</qt>"
#: utility/qpevents.cpp:104
msgid "An upload was initiated"
msgstr "一個上傳的動作已開始進行"
#: utility/qpevents.cpp:113
msgid "About to upload a document"
msgstr "準備上傳一個文件"
#: utility/qpevents.cpp:120
msgid "Document uploaded"
msgstr "文件已上傳"
#: utility/qpevents.cpp:127
msgid "Document moved"
msgstr "文件已移動"
#: utility/qpevents.cpp:137
msgid "Document saved"
msgstr "文件已儲存"
#: utility/qpevents.cpp:143
msgid "About to save a document"
msgstr "準備儲存一個文件"
#: utility/qpevents.cpp:149
msgid "Document opened"
msgstr "文件已開啟"
#: utility/qpevents.cpp:155
msgid "Document closed"
msgstr "文件已關閉"
#: utility/qpevents.cpp:161
msgid "About to close a document"
msgstr "準備關閉一個文件"
#: utility/qpevents.cpp:167
msgid "Project opened"
msgstr "專案已開啟"
#: utility/qpevents.cpp:173
msgid "Project closed"
msgstr "專案已關閉"
#: utility/qpevents.cpp:179
msgid "About to close the project"
msgstr "準備關閉專案"
#: utility/qpevents.cpp:185
msgid "Document added to project"
msgstr "文件已加入至專案"
#: utility/qpevents.cpp:191
msgid "Document removed from project"
msgstr "文件已從專案中移除"
#: utility/qpevents.cpp:199
msgid "Document committed"
msgstr "文件已提交"
#: utility/qpevents.cpp:205
msgid "Document updated"
msgstr "文件已更新"
#: utility/qpevents.cpp:211
msgid "Quanta has been started"
msgstr "Quanta 已經啟動"
#: utility/qpevents.cpp:217
msgid "Quanta is shutting down"
msgstr "Quanta 正在關閉"
#: utility/qpevents.cpp:224
msgid "<qt>Unsupported event <b>%1</b>.</qt>"
msgstr "<qt>未支援的事件 <b>%1</b>.</qt>"
#: utility/qpevents.cpp:224
msgid "Event Handling Error"
msgstr "事件處理錯誤"
#: utility/qpevents.cpp:273
msgid "Logging to remote files is not supported."
msgstr "未支援遠端記錄功能。"
#: utility/qpevents.cpp:282
msgid "Logging to files inside a remote project is not supported."
msgstr "不支援使用遠端專案的檔案作記錄檔。"
#: utility/qpevents.cpp:312
msgid "<qt>Logging failed. Check that you have write access to <i>%1</i>."
msgstr "<qt>記錄失敗。請確認您有足夠的權限在 <i>%1</i> 位置進行寫入。"
#: utility/qpevents.cpp:316
msgid "<qt>Unsupported internal event action : <b>%1</b>.</qt>"
msgstr "<qt>未支援的內部事件動作 : <b>%1</b>.</qt>"
#: utility/qpevents.cpp:339
msgid "<qt>The <b>%1</b> script action was not found on your system.</qt>"
msgstr "<qt>您的系統裏找不到指令稿動作 <b>%1</b>。</qt>"
#: utility/qpevents.cpp:339
msgid "Action Execution Error"
msgstr "動作執行錯誤"
#: utility/qpevents.cpp:341
msgid "Unsupported external event action."
msgstr "未支援的外部事件動作。"
#: utility/qpevents.cpp:343
msgid "Unknown event type."
msgstr "未知的標籤 : "
#: utility/quantanetaccess.cpp:185
msgid "<qt>Do you want to add <br><b>%1</b><br> to the project?</qt>"
msgstr "<qt>您要把 <br><b>%1</b><br> 加入到專案中嗎?</qt>"
#: utility/quantanetaccess.cpp:185
msgid "Add to Project"
msgstr "加入到專案"
#: utility/quantanetaccess.cpp:233
msgid ""
"<qt>Do you really want to delete "
"<br><b>%1</b>"
"<br> and remove it from the project?</qt>"
msgstr "<qt>您真的要刪除 <br><b>%1</b>,並且從專案中移除嗎?</qt>"
#: utility/quantanetaccess.cpp:233
msgid "Delete & Remove From Project"
msgstr "刪除 & 從專案移除"
#: utility/quantanetaccess.cpp:246
msgid "<qt>Do you really want to delete <br><b>%1</b>?</qt>"
msgstr "<qt>您真的要刪除 <br><b>%1</b> 嗎?</qt>"
#: utility/quantanetaccess.cpp:246
msgid "Delete File or Folder"
msgstr "刪除檔案或目錄"
#: parsers/dtd/dtd.cpp:127 parsers/dtd/dtdparser.cpp:78
msgid "<qt>Cannot download the DTD from <b>%1</b>.</qt>"
msgstr "<qt>無法從<b>%1</b>下載 DTD。</qt>"
#: parsers/dtd/dtdparser.cpp:105
msgid ""
"<qt>Error while parsing the DTD."
"<br>The error message is:"
"<br><i>%1</i></qt>"
msgstr "<qt>解析 DTD 時發生錯誤。<br>錯誤訊息為:<br><i>%1</i></qt>"
#: parsers/dtd/dtdparser.cpp:157
msgid ""
"<qt>Cannot create the "
"<br><b>%1</b> file."
"<br>Check that you have write permission in the parent folder.</qt>"
msgstr "<qt>無法建立 <br><b>%1</b> 檔案。<br>請確定您對指定位置擁有寫入的權限。</qt>"
#: parsers/dtd/dtdparser.cpp:169
msgid "No elements were found in the DTD."
msgstr "DTD 中找不到任何元素。"
#: parsers/parsercommon.cpp:177
msgid "%1 block"
msgstr "%1 區塊"
#: plugins/quantapluginconfig.cpp:45
msgid "Message Area Tab"
msgstr "訊息區域分頁"
#: plugins/quantapluginconfig.cpp:46 plugins/quantaplugininterface.cpp:108
#: plugins/quantaplugininterface.cpp:156
msgid "Editor Tab"
msgstr "編輯器分頁"
#: plugins/quantaplugin.cpp:354 plugins/quantaplugin.cpp:370
#: plugins/quantapluginconfig.cpp:46 plugins/quantaplugininterface.cpp:106
#: plugins/quantaplugininterface.cpp:157
msgid "Separate Toolview"
msgstr "獨立的工具檢視"
#: plugins/quantapluginconfig.cpp:68
msgid ""
"The plugin information you entered appears to be invalid. Are you sure you want "
"to apply these settings?"
msgstr "您輸入的外掛程式資訊似乎有誤。您仍然要套用這些設定嗎?"
#: plugins/quantapluginconfig.cpp:68
msgid "Invalid Plugin"
msgstr "無效的外掛程式"
#: plugins/quantapluginconfig.cpp:68
msgid "Do Not Apply"
msgstr "不套用"
#: plugins/quantapluginconfig.cpp:80
msgid "Select Plugin Folder"
msgstr "選擇外掛程式目錄"
#: plugins/quantaplugininterface.cpp:44
msgid "Configure &Plugins..."
msgstr "設定外掛程式(&P)..."
#: plugins/quantaplugininterface.cpp:93
msgid ""
"<qt><b>%1</b> is a command line plugin. We have removed support for "
"command-line plugins. However, the functionality has not been lost as script "
"actions can still be used to run command-line tools. </qt>"
msgstr ""
"<qt><b>%1</b> "
"是一個指令列模式的外掛程式。但是,今版本已經移除對這種外掛程式的支援了。雖然如此,指令列工具的功能仍然可以透過指令稿動作來使用。</qt>"
#: plugins/quantaplugininterface.cpp:93
msgid "Unsupported Plugin Type"
msgstr "未支援的外掛程式類型"
#: plugins/quantaplugininterface.cpp:260
msgid ""
"<qt>The following plugins seems to be invalid:<b>%1</b>."
"<br>"
"<br>Do you want to edit the plugins?</qt>"
msgstr "<qt>下列的外掛程式似乎無效:<b>%1</b>。<br><br>您要編輯外掛程式嗎?</qt>"
#: plugins/quantaplugininterface.cpp:260
msgid "Invalid Plugins"
msgstr "無效的外掛程式"
#: plugins/quantaplugininterface.cpp:260
msgid "Do Not Edit"
msgstr "不要編輯"
#: plugins/quantaplugininterface.cpp:267
msgid "All plugins validated successfully."
msgstr "所有外掛程式已成功驗證。"
#: plugins/quantaplugineditor.cpp:103
msgid "Select Folder"
msgstr "選擇目錄"
#: plugins/quantaplugin.cpp:122
msgid ""
"<qt>The <b>%1</b> plugin could not be loaded."
"<br>Possible reasons are:"
"<br> - <b>%2</b> is not installed;"
"<br> - the file <i>%3</i> is not installed or it is not reachable."
msgstr ""
"<qt>外掛程式 <b>%1</b> 無法被載入。"
"<br>問題的成因可能是:"
"<br> - <b>%2</b> 未安裝;"
"<br> - 檔案 <i>%3</i> 未被安裝或存取不到。"
#: project/projectnewweb.cpp:132
msgid ""
"There was an error while trying to run the \"wget\" application. "
"Check first that it is present on your system and that it is in your PATH."
msgstr "執行\"wget\"應用程式時發生錯誤。 請確定它已安裝,並且位於 PATH 環境變數的位置下。"
#: project/projectnewweb.cpp:138
msgid "This feature is available only if the project lies on a local disk."
msgstr "這個功能只能用於本地儲存的專案。"
#: project/projectnewweb.cpp:168
msgid ""
"wget finished...\n"
msgstr ""
"wget 已完成...\n"
#: project/project.cpp:121 project/project.cpp:300
#: project/projectnewlocal.cpp:257
msgid "%1: Copy to Project"
msgstr "%1: 複製到專案"
#: project/project.cpp:216
msgid ""
"<qt>Found a backup for project <b>%1</b>."
"<br> Do you want to open it?</qt>"
msgstr "<qt>找到專案<b>%1</b>的備份。<br> 您要開啟它嗎?</qt>"
#: project/project.cpp:216
msgid "Open Project Backup"
msgstr "開啟專案備份"
#: project/project.cpp:265
msgid ""
"<qt>The file <b>%1</b> does not exist."
"<br> Do you want to remove it from the list?</qt>"
msgstr "<qt>檔案 <b>%1</b> 不存在。<br> 您要把它從清單中移除嗎?</qt>"
#: project/project.cpp:354
msgid "Renaming files..."
msgstr "正在重新命名檔案..."
#: project/project.cpp:393
msgid "Removing files..."
msgstr "移除檔案中..."
#: project/project.cpp:430
msgid ""
"<qt>Do you want to remove "
"<br><b>%1</b>"
"<br> from the server(s) as well?</qt>"
msgstr "您也要把 <br><b>%1</b><br> 從伺服器移除嗎?"
#: project/project.cpp:430
msgid "Remove From Server"
msgstr "從伺服器移除"
#: project/project.cpp:461
msgid "Project Settings"
msgstr "專案選項"
#: project/project.cpp:490
msgid "No Debugger"
msgstr "沒有除錯器"
#: project/project.cpp:559
msgid "No view was saved yet."
msgstr ""
#: project/project.cpp:567
msgid "Up&load Profiles"
msgstr "上傳 Profi&le"
#: project/project.cpp:576
msgid "Team Configuration"
msgstr "小組設定"
#: project/membereditdlg.cpp:37 project/project.cpp:585
msgid "Team Leader"
msgstr "小組負責人"
#: project/membereditdlg.cpp:38 project/project.cpp:591
msgid "Subproject Leader"
msgstr "子專案負責人"
#: project/membereditdlg.cpp:36 project/project.cpp:596
msgid "Task Leader"
msgstr "工作負責人"
#: project/membereditdlg.cpp:35 project/project.cpp:601
msgid "Simple Member"
msgstr "一般成員"
#: project/project.cpp:607
msgid "Event Configuration"
msgstr "事件設定"
#: project/project.cpp:865 project/project.cpp:880
msgid "Upload project items..."
msgstr "上傳專案項目 ..."
#: project/project.cpp:896
msgid "New Files in Project's Folder"
msgstr "專案目錄中的新檔案"
#: project/project.cpp:1268
msgid ""
"Saving of project failed. Do you want to continue with exit (might cause data "
"loss)?"
msgstr "專案儲存失敗。您仍然要退出嗎?(可能會導致資料遺失)"
#: project/project.cpp:1268 project/projectprivate.cpp:1218
msgid "Project Saving Error"
msgstr "專案儲存錯誤"
#: project/membereditdlg.cpp:85
msgid "Edit Subprojects"
msgstr "編輯子專案"
#: project/membereditdlg.cpp:169
msgid "Select Member"
msgstr "選擇成員"
#: project/membereditdlg.cpp:179
msgid "No entries found in the addressbook."
msgstr ""
#: project/projectupload.cpp:81
msgid "Upload Profiles"
msgstr "上傳 Profile"
#: project/projectupload.cpp:170
msgid "Scanning project files..."
msgstr "掃描專案檔案 ..."
#: project/projectupload.cpp:230
msgid "Building the tree..."
msgstr "正在建立樹狀..."
#: project/projectupload.cpp:361
msgid "Confirm Upload"
msgstr "上傳確認"
#: project/projectupload.cpp:361
msgid ""
"Confirm that you want to upload the following files (unselect the files you do "
"not want to upload):"
msgstr ""
#: project/projectupload.cpp:384
msgid ""
"<qt><b>%1</b> seems to be unaccessible."
"<br>Do you want to proceed with upload?</qt>"
msgstr "<qt><b>%1</b> 似乎無法存取。<br>您仍然要上傳嗎?</qt>"
#: project/projectupload.cpp:466
#, c-format
msgid "Current: %1"
msgstr "目前:%1"
#: project/projectupload.cpp:638
msgid "You cannot remove the last profile."
msgstr "您不可以移除最後的 Profile。"
#: project/projectupload.cpp:638
msgid "Profile Removal Error"
msgstr "Profile 移除錯誤"
#: project/projectupload.cpp:642
msgid "<qt>Do you really want to remove the <b>%1</b> upload profile?</qt>"
msgstr "<qt>您真的要移除上傳的 Profile <b>%1</b>?</qt>"
#: project/projectupload.cpp:643 project/projectupload.cpp:655
msgid "Profile Removal"
msgstr "移除 Profile"
#: project/projectupload.cpp:655
msgid ""
"<qt>You have removed your default profile."
"<br>The new default profile will be <b>%1</b>.</qt>"
msgstr ""
#: project/projectupload.cpp:761
msgid "Do you really want to abort the upload?"
msgstr "您真的要中止上傳嗎?"
#: project/projectupload.cpp:762
msgid "Abort Upload"
msgstr "中止上傳"
#: project/projectupload.cpp:762
msgid ""
"_: Abort the uploading\n"
"Abort"
msgstr ""
#: project/teammembersdlg.cpp:58
msgid "New Member"
msgstr "新成員"
#: project/teammembersdlg.cpp:74 project/teammembersdlg.cpp:144
msgid "The member name cannot be empty."
msgstr "成員名稱不可為空白。"
#: project/teammembersdlg.cpp:79 project/teammembersdlg.cpp:149
msgid "The nickname cannot be empty as it is used as a unique identifier."
msgstr "別名不可為空白,因為它是成員在小組裏使用的唯一代號。"
#: project/teammembersdlg.cpp:100
msgid "Edit Member"
msgstr "編輯成員"
#: project/teammembersdlg.cpp:189
#, fuzzy
msgid ""
"<qt>Are you sure that you want to remove yourself (<b>%1</b>"
") from the project team?"
"<br>If you do so, you should select another member as yourself.</qt>"
msgstr "IO_WriteOnly 無法開啟檔案 %s"
#: project/teammembersdlg.cpp:189 project/teammembersdlg.cpp:195
msgid "Delete Member"
msgstr "刪除成員"
#: project/teammembersdlg.cpp:195
msgid ""
"<qt>Are you sure that you want to remove <b>%1</b> from the project team?</qt>"
msgstr "<qt>您真的要從專案小組移除 <b>%1</b> 嗎?</qt>"
#: project/teammembersdlg.cpp:216
#, fuzzy
msgid ""
"<qt>The <b>%1</b> role is already assigned to <b>%2</b>"
". Do you want to reassign it to the current member?</qt>"
msgstr ""
"現存的檔案已經被修改了,\n"
"你要儲存嗎?"
#: project/teammembersdlg.cpp:216
msgid "Reassign"
msgstr "重新指派"
#: project/teammembersdlg.cpp:216
msgid "Do Not Reassign"
msgstr "不要重新指派"
#: project/teammembersdlg.cpp:226
msgid ""
"<qt>The <b>%1</b> nickname is already assigned to <b>%2 &lt;%3&gt;</b>.</qt>"
msgstr "<qt>別名 <b>%1</b> 已經被指派到 <b>%2 &lt;%3&gt;</b>了。</qt>"
#: project/projectprivate.cpp:74
msgid "<b>Insert Files in Project</b>"
msgstr "<b>插入檔案至專案中</b>"
#: project/projectprivate.cpp:85
msgid "&New Project..."
msgstr "新的專案(&N)..."
#: project/projectprivate.cpp:89
msgid "&Open Project..."
msgstr "開啟專案(&O)..."
#: project/projectprivate.cpp:95
msgid "Open Recent Project"
msgstr "開啟以往的專案"
#: project/projectprivate.cpp:97
msgid "Open/Open recent project"
msgstr "開啟/開啟以往的專案"
#: project/projectprivate.cpp:100
msgid "&Close Project"
msgstr "關閉專案(&C)..."
#: project/projectprivate.cpp:105
msgid "Open Project &View..."
msgstr "開啟專案檢視(&V)..."
#: project/projectprivate.cpp:109
msgid "Open project view"
msgstr "開啟專案檢視"
#: project/projectprivate.cpp:111
msgid "&Save Project View"
msgstr "儲存專案檢視(&S)"
#: project/projectprivate.cpp:114
msgid "Save Project View &As..."
msgstr "另存專案檢視為(&A)..."
#: project/projectprivate.cpp:117
msgid "&Delete Project View"
msgstr "刪除專案檢視(&D)"
#: project/projectprivate.cpp:121
msgid "Close project view"
msgstr "關閉專案檢視"
#: project/projectprivate.cpp:125
msgid "&Insert Files..."
msgstr "插入檔案(&I)..."
#: project/projectprivate.cpp:129
msgid "Inser&t Folder..."
msgstr "插入目錄(&T)..."
#: project/projectprivate.cpp:133
msgid "&Rescan Project Folder..."
msgstr "重新掃描專案目錄(&R)..."
#: project/projectprivate.cpp:141
msgid "&Project Properties"
msgstr "專案屬性(&P)"
#: project/projectprivate.cpp:146
msgid "Save as Project Template..."
msgstr "另存為專案範本..."
#: project/projectprivate.cpp:151
msgid "Save Selection to Project Template File..."
msgstr "另存選擇項目至專案範本檔案..."
#: project/projectprivate.cpp:302
msgid "Adding files to the project..."
msgstr "正在加入檔案到專案..."
#: project/projectprivate.cpp:374
msgid "Reading the project file..."
msgstr "正在讀取專案檔案..."
#: project/projectprivate.cpp:384
msgid "Invalid project file."
msgstr "無效的專案檔案。"
#: project/projectprivate.cpp:906
msgid "Save Project View As"
msgstr "另存專案檢視"
#: project/projectprivate.cpp:907
msgid "Enter the name of the view:"
msgstr "請輸入這個檢視的名稱:"
#: project/projectprivate.cpp:919
msgid ""
"<qt>A project view named <b>%1</b> already exists."
"<br>Do you want to overwrite it?</qt>"
msgstr "<qt>名為 <b>%1</b> 的專案檢視已經存在。<br>您要覆寫它嗎?</qt>"
#: project/projectprivate.cpp:1059
msgid "<qt>Cannot open file <b>%1</b> for writing.</qt>"
msgstr "<qt>無法開啟檔案 <b>%1</b> 作寫入.</qt>"
#: project/projectprivate.cpp:1124
msgid "New Project Wizard"
msgstr "新增專案精靈"
#: project/projectprivate.cpp:1138
msgid "<b>General Project Settings</b>"
msgstr "<b>一般專案設定...</b>"
#: project/projectprivate.cpp:1140
msgid "<b>More Project Settings</b>"
msgstr "<b>更多的專案設定...</b>"
#: project/projectprivate.cpp:1218
msgid ""
"Saving of project failed. Do you want to continue with closing (might cause "
"data loss)?"
msgstr "專案儲存失敗。您仍然要關閉它嗎?(這可能會導致資料遺失的)"
#: project/projectprivate.cpp:1242
msgid ""
"|Project Files\n"
"*|All Files"
msgstr ""
"|專案檔案\n"
"*|所有檔案"
#: project/projectprivate.cpp:1243
msgid "Open Project"
msgstr "開啟專案"
#: project/projectprivate.cpp:1287
#, c-format
msgid "Wrote project file %1"
msgstr "已寫入專案 %1"
#: project/projectprivate.cpp:1291
msgid "<qt>Cannot open the file <b>%1</b> for writing.</qt>"
msgstr "<qt>無法開啟檔案 <b>%1</b> 作寫入。</qt>"
#: project/projectprivate.cpp:1342
msgid "<qt>Cannot open the file <b>%1</b> for reading.</qt>"
msgstr "<qt>無法開啟檔案 <b>%1</b> 作讀取。</qt>"
#: project/projectprivate.cpp:1354
msgid "<qt>Malformed URL: <b>%1</b></qt>"
msgstr "<qt>錯誤的 URL<b>%1</b></qt>"
#: project/projectprivate.cpp:1360
msgid ""
"<qt>The project"
"<br><b>%1</b>"
"<br> seems to be used by another Quanta instance."
"<br>You may end up with data loss if you open the same project in two "
"instances, modify and save them in both."
"<br>"
"<br>Do you want to proceed with open?</qt>"
msgstr ""
"<qt>專案"
"<br><b>%1</b>"
"<br> 似乎正被另一個 Quanta 實體使用著。"
"<br>如果繼續開啟,那麼當您在兩個實體分別儲存專案時,就有可能導致資料遺失。"
"<br>"
"<br>您仍然要開啟它嗎?</qt>"
#: project/projectprivate.cpp:1419
msgid "<qt>Cannot access the project file <b>%1</b>.</qt>"
msgstr "<qt>無法存取專案檔案 <b>%1</b>。</qt>"
#: project/projectnewlocal.cpp:185 project/projectprivate.cpp:1430
msgid "*"
msgstr "*"
#: project/projectnewlocal.cpp:185 project/projectprivate.cpp:1430
msgid "Insert Files in Project"
msgstr "插入檔案至專案中"
#: project/projectnewlocal.cpp:196 project/projectprivate.cpp:1440
msgid "Files: Copy to Project"
msgstr "檔案: 複製到專案"
#: project/projectnewlocal.cpp:244 project/projectprivate.cpp:1489
msgid "Insert Folder in Project"
msgstr "插入目錄至專案中"
#: project/projectprivate.cpp:1642
#, c-format
msgid "Uploaded project file %1"
msgstr "已上傳專案檔案 %1"
#: project/rescanprj.cpp:55
msgid "Reading folder:"
msgstr "讀取目錄:"
#: project/rescanprj.cpp:229
msgid "Building tree:"
msgstr "建立樹狀:"
#: project/eventeditordlg.cpp:301
msgid "Argument:"
msgstr "參數:"
#: project/eventeditordlg.cpp:318
msgid "Receiver:"
msgstr "接收者:"
#: project/eventeditordlg.cpp:337
msgid "Log file:"
msgstr "記錄檔案:"
#: project/eventeditordlg.cpp:339
msgid ""
"A relative file to the project folder or a file outside of the project folder "
"in which case the full path must be specified."
msgstr ""
#: project/eventeditordlg.cpp:341
msgid "Detail:"
msgstr "詳細資料:"
#: project/eventeditordlg.cpp:344
msgid "Full"
msgstr ""
#: project/eventeditordlg.cpp:345
#, fuzzy
msgid "Minimal"
msgstr "一般"
#: project/eventeditordlg.cpp:347
msgid "Behavior:"
msgstr "行為:"
#: project/eventeditordlg.cpp:350
msgid "Create New Log"
msgstr "建立新的記錄"
#: project/eventeditordlg.cpp:351
msgid "Append to Existing Log"
msgstr "附加到目前的記錄"
#: project/eventeditordlg.cpp:356 project/eventeditordlg.cpp:384
msgid "Action name:"
msgstr "動作名稱:"
#: project/eventeditordlg.cpp:375
msgid "Blocking:"
msgstr ""
#: project/projectnewlocal.cpp:78
#, c-format
msgid "Insert files from %1."
msgstr "從 %1 插入檔案。"
#: project/projectnewgeneral.cpp:97
msgid "Select Project Folder"
msgstr "選擇專案目錄"
#: project/projectnewgeneral.cpp:174 project/projectoptions.ui.h:28
msgid "Select Project Template Folder"
msgstr "選擇專案範本目錄"
#: project/projectnewgeneral.cpp:180 project/projectnewgeneral.cpp:228
#, fuzzy
msgid ""
"<qt>The project templates must be stored under the main project folder: "
"<br>"
"<br><b>%1</b></qt>"
msgstr "<qt>您一定要把工具列儲存至以下的目錄:<br><br><b>%1</b></qt>"
#: project/projectnewgeneral.cpp:188 project/projectoptions.ui.h:40
msgid "Select Project Toolbar & Actions Folder"
msgstr "選擇專案工具列 & 動作目錄"
#: project/projectnewgeneral.cpp:194 project/projectnewgeneral.cpp:241
#, fuzzy
msgid ""
"<qt>The project toolbars must be stored under the main project folder: "
"<br>"
"<br><b>%1</b></qt>"
msgstr "<qt>您一定要把工具列儲存至以下的目錄:<br><br><b>%1</b></qt>"
#: project/eventconfigurationdlg.cpp:102
msgid "New Event"
msgstr "新增事件"
#: project/eventconfigurationdlg.cpp:121
msgid "Edit Event"
msgstr "編輯事件"
#: project/eventconfigurationdlg.cpp:144
msgid ""
"<qt>Are you sure that you want to remove the configuration of the <b>%1</b> "
"event?</qt>"
msgstr "<qt>您真的要移除事件 <b>%1</b> 的設定?</qt>"
#: project/eventconfigurationdlg.cpp:144
msgid "Delete Event Configuration"
msgstr "刪除事件設定"
#: ../lib/compatibility/kmdi/qextmdi/ktabbar.cpp:195
msgid "Close this tab"
msgstr "關閉此分頁"
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:139
msgid "Tool &Views"
msgstr "工具檢視(&V)"
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:142
msgid "MDI Mode"
msgstr "多重文件模式"
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:144
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2598
msgid "&Toplevel Mode"
msgstr "最上層模式(&T)"
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:144
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2599
msgid "C&hildframe Mode"
msgstr "子頁面模式(&H)"
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:144
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2600
msgid "Ta&b Page Mode"
msgstr "標籤頁模式 (&B)"
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:144
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2601
msgid "I&DEAl Mode"
msgstr "I&DEAl 模式"
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:154
msgid "Tool &Docks"
msgstr "工具 Docks(&D)"
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:155
msgid "Switch Top Dock"
msgstr "切換到上方的 Dock"
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:157
msgid "Switch Left Dock"
msgstr "切換到左邊的 Dock"
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:159
msgid "Switch Right Dock"
msgstr "切換到右邊的 Dock"
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:161
msgid "Switch Bottom Dock"
msgstr "切換到下方的 Dock"
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:164
msgid "Previous Tool View"
msgstr "上一個工具檢視"
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:166
msgid "Next Tool View"
msgstr "下一個工具檢視"
#: ../lib/compatibility/kmdi/qextmdi/kdockwidget.cpp:2884
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:260
#, c-format
msgid "Show %1"
msgstr "顯示 %1"
#: ../lib/compatibility/kmdi/qextmdi/kdockwidget.cpp:2878
#: ../lib/compatibility/kmdi/qextmdi/kmdiguiclient.cpp:265
#, c-format
msgid "Hide %1"
msgstr "隱藏 %1"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:983
msgid "Window"
msgstr "視窗"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:996
msgid "Undock"
msgstr "Undock"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:1001
msgid "Maximize"
msgstr "最大化"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:1003
msgid "Minimize"
msgstr "最小化"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:1006
msgid "Dock"
msgstr "Dock"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:1011
msgid "Operations"
msgstr "操作"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2590
msgid "&Minimize All"
msgstr "全部最小化(&M)"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2596
msgid "&MDI Mode"
msgstr "多重文件介面模式(&M)"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2623
msgid "&Tile"
msgstr "鋪排(&T)"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2625
msgid "Ca&scade Windows"
msgstr "層疊視窗(&S)"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2626
msgid "Cascade &Maximized"
msgstr "層疊視窗最大化(&M)"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2627
msgid "Expand &Vertically"
msgstr "垂直擴展(&V)"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2628
msgid "Expand &Horizontally"
msgstr "水平擴展(&H)"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2629
msgid "Tile &Non-Overlapped"
msgstr "不重疊鋪排(&N)"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2630
msgid "Tile Overla&pped"
msgstr "重疊鋪排(&P)"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2631
msgid "Tile V&ertically"
msgstr "垂直鋪排(&E)"
#: ../lib/compatibility/kmdi/qextmdi/kmdimainfrm.cpp:2637
msgid "&Dock/Undock"
msgstr "&Dock/Undock"
#: ../lib/compatibility/kmdi/qextmdi/kmdichildfrmcaption.cpp:71
#: ../lib/compatibility/kmdi/qextmdi/kmdichildview.cpp:63
#: ../lib/compatibility/kmdi/qextmdi/kmdichildview.cpp:88
msgid "Unnamed"
msgstr "未命名"
#: ../lib/compatibility/kmdi/qextmdi/kmdichildfrm.cpp:1237
#: ../lib/compatibility/kmdi/qextmdi/kmdichildfrm.cpp:1259
msgid "&Restore"
msgstr "還原(&R)"
#: ../lib/compatibility/kmdi/qextmdi/kmdichildfrm.cpp:1238
msgid "&Move"
msgstr "移動(&O)"
#: ../lib/compatibility/kmdi/qextmdi/kmdichildfrm.cpp:1239
msgid "R&esize"
msgstr "調整大小(&E)"
#: ../lib/compatibility/kmdi/qextmdi/kmdichildfrm.cpp:1240
msgid "M&inimize"
msgstr "最小化(&I)"
#: ../lib/compatibility/kmdi/qextmdi/kmdichildfrm.cpp:1241
msgid "M&aximize"
msgstr "最大化(&A)"
#: ../lib/compatibility/kmdi/qextmdi/kmdichildfrm.cpp:1261
msgid "&Maximize"
msgstr "放到最大(&M)"
#: ../lib/compatibility/kmdi/qextmdi/kmdichildfrm.cpp:1263
msgid "&Minimize"
msgstr "縮到最小(&M)"
#: ../lib/compatibility/kmdi/qextmdi/kmdichildfrm.cpp:1265
msgid "M&ove"
msgstr "移動(&O)"
#: ../lib/compatibility/kmdi/qextmdi/kmdichildfrm.cpp:1267
msgid "&Resize"
msgstr "調整大小(&R)"
#: ../lib/compatibility/kmdi/qextmdi/kmdichildfrm.cpp:1270
msgid "&Undock"
msgstr "&Undock"
#: ../lib/compatibility/kmdi/qextmdi/kdockwidget.cpp:237
msgid ""
"_: Freeze the window geometry\n"
"Freeze"
msgstr "鎖定位置"
#: ../lib/compatibility/kmdi/qextmdi/kdockwidget.cpp:244
msgid ""
"_: Dock this window\n"
"Dock"
msgstr "Dock"
#: ../lib/compatibility/kmdi/qextmdi/kdockwidget.cpp:251
msgid "Detach"
msgstr "Detach"
#: ../lib/compatibility/kmdi/qextmdi/kmdidockcontainer.cpp:215
msgid ""
"_: Switch between overlap and side by side mode\n"
"Overlap"
msgstr "重疊"
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:46
msgid "Share Hot New Stuff"
msgstr "分享禮物"
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:67
msgid "Version:"
msgstr "版本:"
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:72
msgid "Release:"
msgstr "發行:"
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:78
msgid "License:"
msgstr "許可證:"
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:82
msgid "GPL"
msgstr "GPL"
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:87
msgid "Language:"
msgstr "語言:"
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:93
msgid "Preview URL:"
msgstr "預覽 URL"
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:98
msgid "Summary:"
msgstr "摘要:"
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:116
msgid "Old upload information found, fill out fields?"
msgstr "找到以往的上傳資訊。要用來填上嗎?"
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:116
msgid "Fill Out Fields"
msgstr "填上"
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:116
msgid "Do Not Fill Out"
msgstr "不要填上"
#: ../lib/compatibility/knewstuff/uploaddialog.cpp:139
msgid "Please put in a name."
msgstr "請輸入一個名稱。"
#: ../lib/compatibility/knewstuff/knewstuffgeneric.cpp:133
msgid "The file '%1' already exists. Do you want to override it?"
msgstr "名為“%1”的檔案已經存在。您確定要覆寫它嗎"
#: ../lib/compatibility/knewstuff/provider.cpp:205
msgid "Error parsing providers list."
msgstr "供應者列表有語法錯誤。"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:71
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:78
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:94
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:101
msgid "Get Hot New Stuff"
msgstr "取得熱門禮物"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:190
msgid "Welcome"
msgstr "歡迎"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:210
msgid "Highest Rated"
msgstr "最高評分"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:211
msgid "Most Downloads"
msgstr "最多下載次數"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:212
msgid "Latest"
msgstr "最新"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:222
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:228
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:234
msgid "Version"
msgstr "版本"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:223
msgid "Rating"
msgstr "評分"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:229
msgid "Downloads"
msgstr "下載"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:235
msgid "Release Date"
msgstr "發行日期"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:245
msgid "Install"
msgstr "安裝"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:246
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:425
msgid "Details"
msgstr "詳細資料"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:397
msgid ""
"Name: %1\n"
"Author: %2\n"
"License: %3\n"
"Version: %4\n"
"Release: %5\n"
"Rating: %6\n"
"Downloads: %7\n"
"Release date: %8\n"
"Summary: %9\n"
msgstr ""
"姓名: %1\n"
"作者: %2\n"
"許可證: %3\n"
"版本: %4\n"
"發行: %5\n"
"評分: %6\n"
"下載次數: %7\n"
"發行日期: %8\n"
"摘要: %9\n"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:419
msgid ""
"Preview: %1\n"
"Payload: %2\n"
msgstr ""
"預覽: %1\n"
"下載位置: %2\n"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:493
msgid "Installation successful."
msgstr "安裝成功。"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:493
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:495
msgid "Installation"
msgstr "安裝"
#: ../lib/compatibility/knewstuff/downloaddialog.cpp:495
msgid "Installation failed."
msgstr "安裝失敗。"
#: ../lib/compatibility/knewstuff/knewstuff.cpp:38
#, c-format
msgid "Download New %1"
msgstr "下載新的 %1"
#: ../lib/compatibility/knewstuff/engine.cpp:211
msgid "Successfully installed hot new stuff."
msgstr "成功安裝熱門禮物。"
#: ../lib/compatibility/knewstuff/engine.cpp:216
msgid "Failed to install hot new stuff."
msgstr "安裝熱門禮物失敗。"
#: ../lib/compatibility/knewstuff/engine.cpp:270
msgid "Unable to create file to upload."
msgstr "無法建立檔案來上傳。"
#: ../lib/compatibility/knewstuff/engine.cpp:285
msgid ""
"The files to be uploaded have been created at:\n"
msgstr ""
"要上傳的檔案已建立在:\n"
#: ../lib/compatibility/knewstuff/engine.cpp:286
msgid ""
"Data file: %1\n"
msgstr ""
"資料檔案:%1 \n"
#: ../lib/compatibility/knewstuff/engine.cpp:288
msgid ""
"Preview image: %1\n"
msgstr ""
"預覽影像:%1\n"
#: ../lib/compatibility/knewstuff/engine.cpp:290
msgid ""
"Content information: %1\n"
msgstr ""
"內容資訊:%1\n"
#: ../lib/compatibility/knewstuff/engine.cpp:291
msgid ""
"Those files can now be uploaded.\n"
msgstr ""
"那些檔案可以現在上傳。\n"
#: ../lib/compatibility/knewstuff/engine.cpp:292
msgid "Beware that any people might have access to them at any time."
msgstr "請注意所有人可以在任何時間存取它們。"
#: ../lib/compatibility/knewstuff/engine.cpp:294
msgid "Upload Files"
msgstr "上傳檔案"
#: ../lib/compatibility/knewstuff/engine.cpp:299
msgid "Please upload the files manually."
msgstr "請自行上傳檔案。"
#: ../lib/compatibility/knewstuff/engine.cpp:303
msgid "Upload Info"
msgstr "上傳資訊"
#: ../lib/compatibility/knewstuff/engine.cpp:311
msgid "&Upload"
msgstr "上傳(&U)"
#: ../lib/compatibility/knewstuff/engine.cpp:413
msgid "Successfully uploaded new stuff."
msgstr "成功上傳熱門禮物。"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:83
msgid ""
"There was an error with the downloaded resource tarball file. Possible causes "
"are damaged archive or invalid directory structure in the archive."
msgstr "下載的資源套件包有錯誤。可能它已受損或裡面的目錄結構無效。"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:83
msgid "Resource Installation Error"
msgstr "資源安裝錯誤"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:94
msgid "No keys were found."
msgstr "找不到密鑰。"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:99
msgid "The validation failed for unknown reason."
msgstr "未知的原因導敗檢驗失敗。"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:106
msgid "The MD5SUM check failed, the archive might be broken."
msgstr "MD5SUM 檢查失敗,套件包可能已損壞。"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:111
msgid "The signature is bad, the archive might be broken or altered."
msgstr "簽署有誤,套件包可能已損壞或被修改過。"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:121
msgid "The signature is valid, but untrusted."
msgstr "簽署有效,但不可信。"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:127
msgid "The signature is unknown."
msgstr "未知的簽署。"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:131
msgid ""
"The resource was signed with key <i>0x%1</i>, belonging to <i>%2 &lt;%3&gt;</i>"
"."
msgstr "資源被密鑰<i>0x%1</i>簽署過。這個密鑰是屬於<i>%2 &lt;%3&gt;</i>的。"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:137
msgid ""
"<qt>There is a problem with the resource file you have downloaded. The errors "
"are :<b>%1</b>"
"<br>%2"
"<br>"
"<br>Installation of the resource is <b>not recommended</b>."
"<br>"
"<br>Do you want to proceed with the installation?</qt>"
msgstr ""
"<qt>您下載的資源檔案有問題。錯誤是:<b>%1</b>"
"<br>%2"
"<br>"
"<br>我們<b>不建議</b>您安裝它。"
"<br>"
"<br>您仍然要安裝嗎?</qt>"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:137
msgid "Problematic Resource File"
msgstr "有問題的資源檔案"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:140
msgid "<qt>%1<br><br>Press OK to install it.</qt>"
msgstr "<qt>%1<br><br>請按確定來安裝它。</qt>"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:140
msgid "Valid Resource"
msgstr "有效資源"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:190
msgid "The signing failed for unknown reason."
msgstr "未知的錯誤導致簽署失敗。"
#: ../lib/compatibility/knewstuff/knewstuffsecure.cpp:195
msgid ""
"There are no keys usable for signing or you did not entered the correct "
"passphrase.\n"
"Proceed without signing the resource?"
msgstr ""
"由於找不到可作簽署的密鑰,或您輸入的密碼短語是錯誤的,所以無法簽署資源。\n"
"要略過簽名程序並繼續嗎?"
#: ../lib/compatibility/knewstuff/security.cpp:63
msgid ""
"<qt>Cannot start <i>gpg</i> and retrieve the available keys. Make sure that <i>"
"gpg</i> is installed, otherwise verification of downloaded resources will not "
"be possible.</qt>"
msgstr "<qt>無法開啟<i>gpg</i>來取得可用的密鑰。請確定<i>gpg</i>已安裝,否則將無法對下載的資源進行檢驗。</p>"
#: ../lib/compatibility/knewstuff/security.cpp:177
msgid ""
"<qt>Enter passphrase for key <b>0x%1</b>, belonging to"
"<br><i>%2&lt;%3&gt;</i>:</qt>"
msgstr "<qt>請輸入密鑰<b>0x%1</b>的密碼短語。這個密鑰是屬於<br><i>%2&lt;%3&gt;</i>的:</qt>"
#: ../lib/compatibility/knewstuff/security.cpp:257
msgid ""
"<qt>Cannot start <i>gpg</i> and check the validity of the file. Make sure that "
"<i>gpg</i> is installed, otherwise verification of downloaded resources will "
"not be possible.</qt>"
msgstr "<qt>無法開啟<i>gpg</i>來檢驗檔案。請確定<i>gpg</i>已安裝,否則將無法對下載的資源進行檢驗。</p>"
#: ../lib/compatibility/knewstuff/security.cpp:317
msgid "Select Signing Key"
msgstr "選擇用作簽署的密鑰"
#: ../lib/compatibility/knewstuff/security.cpp:317
msgid "Key used for signing:"
msgstr "用作簽署的密鑰:"
#: ../lib/compatibility/knewstuff/security.cpp:338
msgid ""
"<qt>Cannot start <i>gpg</i> and sign the file. Make sure that <i>gpg</i> "
"is installed, otherwise signing of the resources will not be possible.</qt>"
msgstr "<qt>無法開啟<i>gpg</i>來簽署檔案。請確定<i>gpg</i>已安裝,否則將無法對資源進行簽署。</p>"
#: ../lib/compatibility/knewstuff/providerdialog.cpp:53
msgid "Hot New Stuff Providers"
msgstr "熱門禮物的供應者"
#: ../lib/compatibility/knewstuff/providerdialog.cpp:61
msgid "Please select one of the providers listed below:"
msgstr "請下面列表中選擇一個供應者:"
#: ../lib/compatibility/knewstuff/providerdialog.cpp:88
msgid "No provider selected."
msgstr "沒有選擇供應者。"
#: ../lib/ksavealldialog.cpp:53 ../lib/ksavealldialog.cpp:144
msgid "Save Modified Files?"
msgstr "儲存已修改的檔案?"
#: ../lib/ksavealldialog.cpp:58 ../lib/ksavealldialog.cpp:151
msgid "The following files have been modified. Save them?"
msgstr "下列的檔案已經被修改了,你要儲存嗎?"
#: ../lib/ksavealldialog.cpp:65
msgid "Save &Selected"
msgstr "儲存已選擇的(&S)"
#: ../lib/ksavealldialog.cpp:65
msgid "Saves all selected files"
msgstr "儲存所有已選擇的檔案"
#: ../lib/ksavealldialog.cpp:66 ../lib/ksavealldialog.cpp:157
msgid "Save &None"
msgstr "不儲存(&N)"
#: ../lib/ksavealldialog.cpp:68 ../lib/ksavealldialog.cpp:159
msgid "Lose all modifications"
msgstr "遺失所有修改"
#: ../lib/ksavealldialog.cpp:69 ../lib/ksavealldialog.cpp:160
msgid "Cancels the action"
msgstr "取消動作"
#: ../lib/ksavealldialog.cpp:156
msgid "Save &All"
msgstr "儲存全部(&A)"
#: ../lib/ksavealldialog.cpp:156
msgid "Saves all modified files"
msgstr "儲存全部已修改的檔案"
#~ msgid "Abort"
#~ msgstr "中止"
#~ msgid "<qt>An error happened while saving the <b>%1</b> toolbar.<br>Check that you have write permissions for<br><b>%2</b></qt>"
#~ msgstr "<qt>儲存工具列 <b>%1</b> 時發生錯誤。<br>請確定您對 <br><b>%2</b> 擁有寫入權限</qt>"