You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tde-i18n/tde-i18n-ms/messages/tdeadmin/kcmlilo.po

684 lines
25 KiB

# Malay translation.
# FIRST AUTHOR MIMOS <opensource@mimos.my>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: Mimos\n"
"POT-Creation-Date: 2007-03-13 02:18+0100\n"
"PO-Revision-Date: 2005-09-22 14:39+0730\n"
"Last-Translator: MIMOS <opensource@mimos.my>\n"
"Language-Team: Malay <kedidiemas@yahoogroups.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: kde-qt-common/EditWidget.cpp:43
msgid "Select..."
msgstr "Pilih..."
#: kde-qt-common/expert.cpp:41
msgid ""
"You can edit the lilo.conf file directly here. All changes you make here are "
"automatically transferred to the graphical interface."
msgstr ""
"Anda boleh terus edit fail lilo.conf di sini. Semua perubahan yang anda buat di "
"sini, secara automatik, dipindahkan ke antara muka grafik."
#: kde-qt-common/general.cpp:45
msgid "Install &boot record to drive/partition:"
msgstr "Pasang rekod &but pada pemacu/petakan:"
#: kde-qt-common/general.cpp:55
msgid ""
"Select the drive or partition you want to install the LILO boot loader to here. "
"Unless you intend to use other boot managers in addition to LILO, this should "
"be the MBR (master boot record) of your boot drive."
"<br>In this case, you should probably select <i>/dev/hda</i> "
"if your boot drive is an IDE drive or <i>/dev/sda</i> "
"if your boot drive is SCSI."
msgstr ""
"Pilih pemacu atau petakan yang padanya anda ingin pasangkan pemuat but LILO, di "
"sini. Kecuali anda ingin menggunakan pengurus but lain di samping LILO, ini "
"sepatutnya MBR (rekod but induk) bagi pemacu but anda. "
"<br>Dalam kes ini, anda mungkin patut pilih <i>/dec/hda</i> "
"jika pemacu but anda adalah pemacu IDE atau <i>/dev/sda</i> "
"jika pemacu but anda adalah SCSI."
#: kde-qt-common/general.cpp:58
msgid "Boot the default kernel/OS &after:"
msgstr "But kernel/OS piawai &selepas:"
#: kde-qt-common/general.cpp:60
msgid "/10 seconds"
msgstr "/10 saat"
#: kde-qt-common/general.cpp:64
msgid ""
"LILO will wait the amount of time specified here before booting the kernel (or "
"OS) marked as <i>default</i> in the <b>Images</b> tab."
msgstr ""
"LILO akan tunggu jumlah masa yang dinyatakan di sini sebelum membut kernel "
"(atau OS) yang ditanda sebagai <i>piawai</i> dalam <b>tab</b>Imej."
#: kde-qt-common/general.cpp:67
msgid "Use &linear mode"
msgstr "Guna mod &linear"
#: kde-qt-common/general.cpp:69
msgid ""
"Check this box if you want to use the linear mode."
"<br>Linear mode tells the boot loader the location of kernels in linear "
"addressing rather than sector/head/cylinder."
"<br>linear mode is required for some SCSI drives, and shouldn't hurt unless "
"you're planning to create a boot disk to be used with a different computer."
"<br>See the lilo.conf man page for details."
msgstr ""
"Tandakan kotak ini jika anda ingin guna mod linear."
"<br>Mod linear memberitahu pemuat but tentang lokasi kernel dalam pengalamatan "
"linear dan bukan sektor/kepala/silinder."
"<br>mod linear diperlukan untuk sesetengah pemacu SCSI, dan tidak sepatutnya "
"menjejaskan melainkan anda merancang untuk mencipta cakera but dengan komputer "
"yang berbeza."
"<br>Lihat halaman manual lilo.conf untuk keterangan lanjut."
#: kde-qt-common/general.cpp:70
msgid "Use &compact mode"
msgstr "Guna mod &padat"
#: kde-qt-common/general.cpp:72
msgid ""
"Check this box if you want to use the compact mode."
"<br>The compact mode tries to merge read requests for adjacent sectors into a "
"single read request. This reduces load time and keeps the boot map smaller, but "
"will not work on all systems."
msgstr ""
"Tandakan kotak ini jika anda ingin menggunakan mod padat."
"<br>Mod padat cuba mencantumkan beberapa permintaan baca untuk sektor "
"bersebelahan menjadi satu permintaan baca. Ini mengurangkan masa muat dan "
"memastikan peta but lebih kecil, tetapi tidak akan berfungsi untuk semua "
"sistem."
#: kde-qt-common/general.cpp:76 kde/Details.cpp:82 qt/Details.cpp:85
msgid "&Record boot command lines for defaults"
msgstr "&Rekodkan baris arahan but untuk piawai"
#: kde-qt-common/general.cpp:78
msgid ""
"Checking this box enables automatic recording of boot command lines as the "
"defaults for the following boots. This way, lilo \"locks\" on a choice until it "
"is manually overridden.\n"
"This sets the <b>lock</b> option in lilo.conf."
msgstr ""
"Menandakan kotak ini akan mengaktifkan perakaman automatik bagi baris arahan "
"but sebagai piawai bagi but yang berikut. Dengan cara ini, lilo\"mempasak\" "
"pilihan sehingga ia diatasi secara manual.\n"
"Ini mengeset <b>opsyen</b> pasak dalam lilo.conf."
#: kde-qt-common/general.cpp:79 kde/Details.cpp:84 qt/Details.cpp:87
msgid "R&estrict parameters"
msgstr "&Mengehad parameter"
#: kde-qt-common/general.cpp:82
msgid ""
"If this box is checked, a password (entered below) is required only if any "
"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
"linux single</i> or <i>linux init=/bin/sh</i>).\n"
"This sets the <b>restricted</b> option in lilo.conf."
"<br>This sets a default for all Linux kernels you want to boot. If you need a "
"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
"Details</i>."
msgstr ""
"Jika kotak ini ditanda, kata laluan (dimasukkan di bawah) diperlukan hanya jika "
"mana-mana parameter diubah (iaitu, pengguna boleh but <i>linux</i>"
", tetapi tidak<i>linux tunggal</i> atau <i>linux init=/bin/sh</i>).\n"
"Ini mengeset <b>pilihan</b> terhad dalam lilo.conf."
"<br>Ini mengeset suatu piawai bagi semua kernel Linux yang anda ingin but. Jika "
"anda perlu seting prakernel, pergi ke <i>Tab sistem operasi</i> dan pilih <i>"
"Perincian</i>."
#: kde-qt-common/general.cpp:86 kde/Details.cpp:89 qt/Details.cpp:93
msgid "Require &password:"
msgstr "Perlu &kata laluan:"
#: kde-qt-common/general.cpp:93
msgid ""
"Enter the password required for bootup (if any) here. If <i>restricted</i> "
"above is checked, the password is required for additional parameters only."
"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
"You'll want to make sure nobody untrusted can read this file. Also, you "
"probably don't want to use your normal/root password here."
"<br>This sets a default for all Linux kernels you want to boot. If you need a "
"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
"Details</i>."
msgstr ""
"Masukkan kata laluan yang diperlukan untuk membut (jika ada) di sini. Jika <i>"
"terhad</i> di atas ditandakan, kata laluan diperlukan untuk parameter tambahan "
"sahaja."
"<br><b>WARNING:</b> Kata laluan disimpan dalam teks jelas dalam /etc/lilo.conf. "
"Anda perlu pastikan tiada siapa pun yang tidak dipercayai dapat membaca fail "
"ini. Juga, anda mungkin tidak mahu menggunakan kata laluan biasa/root anda di "
"sini."
"<br>Ini mengeset piawai bagi semua kernel Linux yang anda ingin but. Jika anda "
"perlu seting prakernel, pergi ke <i>Tab sistem operasi</i> dan pilih<i>"
"Perincian</i>."
#: kde-qt-common/general.cpp:97
msgid "&Default graphics mode on text console:"
msgstr "Mod grafik &piawai dalam konsol teks:"
#: kde-qt-common/general.cpp:100
msgid ""
"You can select the default graphics mode here."
"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
"boot time."
"<br>This sets a default for all Linux kernels you want to boot. If you need a "
"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
"Details</i>."
msgstr ""
"Anda boleh pilih mod grafik piawai di sini."
"<br>Jika anda ingin menggunakan mod grafik VGA, anda mesti kompil kernel dengan "
"sokongan untuk peranti penimbal bingkai. Seting <i>tanya</i> "
"menimbulkan penggesa semasa but."
"<br>Ini mengeset suatu piawai bagi semua kernel Linux yang anda ingin but. Jika "
"anda perlu seting prakernel, pergi ke <i>tab sistem operasi</i> dan pilih <i>"
"Perincian</i>."
#: kde-qt-common/general.cpp:101 kde/Details.cpp:48 qt/Details.cpp:48
msgid "default"
msgstr "piawai"
#: kde-qt-common/general.cpp:102 kde/Details.cpp:49 qt/Details.cpp:49
msgid "ask"
msgstr "minta"
#: kde-qt-common/general.cpp:103 kde/Details.cpp:50 qt/Details.cpp:50
msgid "text 80x25 (0)"
msgstr "teks 80x25 (0)"
#: kde-qt-common/general.cpp:104 kde/Details.cpp:51 qt/Details.cpp:51
msgid "text 80x50 (1)"
msgstr "teks 80x50 (1)"
#: kde-qt-common/general.cpp:105 kde/Details.cpp:52 qt/Details.cpp:52
msgid "text 80x43 (2)"
msgstr "teks 80x43 (2)"
#: kde-qt-common/general.cpp:106 kde/Details.cpp:53 qt/Details.cpp:53
msgid "text 80x28 (3)"
msgstr "teks 80x28 (3)"
#: kde-qt-common/general.cpp:107 kde/Details.cpp:54 qt/Details.cpp:54
msgid "text 80x30 (4)"
msgstr "teks 80x30 (4)"
#: kde-qt-common/general.cpp:108 kde/Details.cpp:55 qt/Details.cpp:55
msgid "text 80x34 (5)"
msgstr "teks 80x34 (5)"
#: kde-qt-common/general.cpp:109 kde/Details.cpp:56 qt/Details.cpp:56
msgid "text 80x60 (6)"
msgstr "teks 80x60 (6)"
#: kde-qt-common/general.cpp:110 kde/Details.cpp:57 qt/Details.cpp:57
msgid "text 40x25 (7)"
msgstr "teks 40x25 (7)"
#: kde-qt-common/general.cpp:111 kde/Details.cpp:58 qt/Details.cpp:58
msgid "VGA 640x480, 256 colors (769)"
msgstr "VGA 640x480, 256 warna (769)"
#: kde-qt-common/general.cpp:112 kde/Details.cpp:59 qt/Details.cpp:59
msgid "VGA 640x480, 32767 colors (784)"
msgstr "VGA 640x480, 32767 warna (784)"
#: kde-qt-common/general.cpp:113 kde/Details.cpp:60 qt/Details.cpp:60
msgid "VGA 640x480, 65536 colors (785)"
msgstr "VGA 640x480, 65536 warna (785)"
#: kde-qt-common/general.cpp:114 kde/Details.cpp:61 qt/Details.cpp:61
msgid "VGA 640x480, 16.7M colors (786)"
msgstr "VGA 640x480, 16.7M warna (786)"
#: kde-qt-common/general.cpp:115 kde/Details.cpp:62 qt/Details.cpp:62
msgid "VGA 800x600, 256 colors (771)"
msgstr "VGA 800x600, 256 warna (771)"
#: kde-qt-common/general.cpp:116 kde/Details.cpp:63 qt/Details.cpp:63
msgid "VGA 800x600, 32767 colors (787)"
msgstr "VGA 800x600, 32767 warna (787)"
#: kde-qt-common/general.cpp:117 kde/Details.cpp:64 qt/Details.cpp:64
msgid "VGA 800x600, 65536 colors (788)"
msgstr "VGA 800x600, 65536 warna (788)"
#: kde-qt-common/general.cpp:118 kde/Details.cpp:65 qt/Details.cpp:65
msgid "VGA 800x600, 16.7M colors (789)"
msgstr "VGA 800x600, 16.7M warna (789)"
#: kde-qt-common/general.cpp:119 kde/Details.cpp:66 qt/Details.cpp:66
msgid "VGA 1024x768, 256 colors (773)"
msgstr "VGA 1024x768, 256 warna (773)"
#: kde-qt-common/general.cpp:120 kde/Details.cpp:67 qt/Details.cpp:67
msgid "VGA 1024x768, 32767 colors (790)"
msgstr "VGA 1024x768, 32767 warna (790)"
#: kde-qt-common/general.cpp:121 kde/Details.cpp:68 qt/Details.cpp:68
msgid "VGA 1024x768, 65536 colors (791)"
msgstr "VGA 1024x768, 65536 warna (791)"
#: kde-qt-common/general.cpp:122 kde/Details.cpp:69 qt/Details.cpp:69
msgid "VGA 1024x768, 16.7M colors (792)"
msgstr "VGA 1024x768, 16.7M warna (792)"
#: kde-qt-common/general.cpp:123 kde/Details.cpp:70 qt/Details.cpp:70
msgid "VGA 1280x1024, 256 colors (775)"
msgstr "VGA 1280x1024, 256 warna (775)"
#: kde-qt-common/general.cpp:124 kde/Details.cpp:71 qt/Details.cpp:71
msgid "VGA 1280x1024, 32767 colors (793)"
msgstr "VGA 1280x1024, 32767 warna (793)"
#: kde-qt-common/general.cpp:125 kde/Details.cpp:72 qt/Details.cpp:72
msgid "VGA 1280x1024, 65536 colors (794)"
msgstr "VGA 1280x1024, 65536 warna (794)"
#: kde-qt-common/general.cpp:126 kde/Details.cpp:73 qt/Details.cpp:73
msgid "VGA 1280x1024, 16.7M colors (795)"
msgstr "VGA 1280x1024, 16.7M warna (795)"
#: kde-qt-common/general.cpp:130
msgid "Enter LILO &prompt automatically"
msgstr "Masukkan &penggesa LILO secara automatik"
#: kde-qt-common/general.cpp:131
msgid ""
"If this box is checked, LILO goes to the LILO prompt whether or not a key is "
"pressed. If it is turned off, LILO boots the default operating system unless "
"shift is pressed (in that case, it goes to the LILO prompt)."
"<br>This sets the <i>prompt</i> option in lilo.conf."
msgstr ""
"Jika kotak ini ditanda, LILO pergi ke penggesa LILO sama ada suatu kekunci "
"ditekan atau tidak. Jika ia ditutup, LILO membut sistem operasi piawai "
"melainkan shift ditekan (dalam kes ini, ia pergi ke penggesa)."
"<br> Ini mengeset <i>opsyen</i>penggesa dalam lilo.conf."
#: kde-qt-common/images.cpp:53
msgid ""
"This is the list of kernels and operating systems you can currently boot. "
"Select which one you want to edit here."
msgstr ""
"Ini ialah senarai kernel dan sistem operasi yang anda boleh but masa ini. Pilih "
"yang mana satu anda ingin edit di sini."
#: kde-qt-common/images.cpp:59 kde-qt-common/images.cpp:281
msgid "&Kernel:"
msgstr "&Kernel:"
#: kde-qt-common/images.cpp:60 kde-qt-common/images.cpp:187
msgid "Enter the filename of the kernel you want to boot here."
msgstr "Masukkan nama fail kernel yang anda ingin but di sini."
#: kde-qt-common/images.cpp:62 kde-qt-common/images.cpp:188
#: kde-qt-common/images.cpp:216
msgid "&Label:"
msgstr "&Label:"
#: kde-qt-common/images.cpp:63 kde-qt-common/images.cpp:188
msgid "Enter the label (name) of the kernel you want to boot here."
msgstr "Masukkan label (nama) kernel yang anda ingin but di sini."
#: kde-qt-common/images.cpp:65 kde-qt-common/images.cpp:189
msgid "&Root filesystem:"
msgstr "&Root sistem fail:"
#: kde-qt-common/images.cpp:66 kde-qt-common/images.cpp:189
msgid ""
"Enter the root filesystem (i.e. the partition that will be mounted as / at boot "
"time) for the kernel you want to boot here."
msgstr ""
"Masukkan sistem fail root (iaitu petakan yang akan dilekapkan sebagai / pada "
"masa but) untuk kernel yang anda ingin but di sini."
#: kde-qt-common/images.cpp:68 kde-qt-common/images.cpp:190
msgid "&Initial ramdisk:"
msgstr "Cakera ram &mula:"
#: kde-qt-common/images.cpp:69 kde-qt-common/images.cpp:190
msgid ""
"If you want to use an initial ramdisk (initrd) for this kernel, enter its "
"filename here. Leave this field blank if you don't intend to use an initial "
"ramdisk for this kernel."
msgstr ""
"Jika anda ingin menggunakan cakera ram mula (initrd) bagi kernel ini, masukkan "
"nama failnya di sini. Biarkan medan ini kosong jika anda tidak berhasrat "
"menggunakan cakera ram mula bagi kernel ini."
#: kde-qt-common/images.cpp:71
msgid "E&xtra parameters:"
msgstr "Parameter &tambahan:"
#: kde-qt-common/images.cpp:72
msgid ""
"Enter any extra parameters you wish to pass to the kernel here. Usually, this "
"can be left blank."
"<br>This sets the <i>append</i> option in lilo.conf."
msgstr ""
"Masukkan sebarang parameter tambahan yang anda ingin hantar ke kernel di sini. "
"Biasanya, ini boleh dibiarkan kosong."
"<br>Ini mengeset <i>opsyen</i> tambah dalam lilo.conf."
#: kde-qt-common/images.cpp:79
msgid "Set &Default"
msgstr "Set &Piawai"
#: kde-qt-common/images.cpp:80
msgid "Boot this kernel/OS if the user doesn't make a different choice"
msgstr "But kernel/OS ini jika pengguna tidak membuat sebarang pilihan"
#: kde-qt-common/images.cpp:82
msgid "De&tails"
msgstr "&Detail"
#: kde-qt-common/images.cpp:83
msgid ""
"This button brings up a dialog box with further, less commonly used, options."
msgstr ""
"Butang ini menimbulkan kotak dialog dengan opsyen lanjut yang jarang digunakan."
#: kde-qt-common/images.cpp:85
msgid "&Probe"
msgstr "&Siasat"
#: kde-qt-common/images.cpp:87
msgid ""
"Automatically generate a (hopefully) reasonable lilo.conf for your system"
msgstr ""
"Menjana (harap-harap) lilo.conf yang munasabah secara automatik bagi sistem "
"anda"
#: kde-qt-common/images.cpp:88
msgid "&Check Configuration"
msgstr "&Semak Konfigurasi"
#: kde-qt-common/images.cpp:90
msgid "Run LILO in test mode to see if the configuration is ok"
msgstr ""
"Jalankan LILO dalam mod ujian untuk melihat sama ada konfigurasi adalah ok"
#: kde-qt-common/images.cpp:91
msgid "Add &Kernel..."
msgstr "Tambah &Kernel..."
#: kde-qt-common/images.cpp:93
msgid "Add a new Linux kernel to the boot menu"
msgstr "Tambah kernel Linux baru untuk but menu"
#: kde-qt-common/images.cpp:94
msgid "Add Other &OS..."
msgstr "Tambah &OS Lain..."
#: kde-qt-common/images.cpp:96
msgid "Add a non-Linux OS to the boot menu"
msgstr "Tambah OS bukan Linux untuk but menu"
#: kde-qt-common/images.cpp:97
msgid "&Remove Entry"
msgstr "&Buang Entri"
#: kde-qt-common/images.cpp:99
msgid "Remove entry from the boot menu"
msgstr "Buang entri dari menu but"
#: kde-qt-common/images.cpp:177
msgid ""
"Configuration ok. LILO said:\n"
msgstr ""
"Konfigurasi ok. Kata LILO:\n"
#: kde-qt-common/images.cpp:178
msgid "Configuration OK"
msgstr "Konfigurasi OK"
#: kde-qt-common/images.cpp:180
msgid ""
"Configuration NOT ok. LILO said:\n"
msgstr ""
"Konfigurasi TIDAK ok. Kata LILO:\n"
#: kde-qt-common/images.cpp:181
msgid "Configuration NOT ok"
msgstr "Konfigurasi TIDAK ok"
#: kde-qt-common/images.cpp:187
msgid "&Kernel filename:"
msgstr "Nama fail &kernel:"
#: kde-qt-common/images.cpp:215
msgid "Boot from dis&k:"
msgstr "But dari &cakera:"
#: kde-qt-common/images.cpp:215
msgid ""
"Enter the partition containing the operating system you'd like to boot here."
msgstr ""
"Masukkan petakan yang mengandungi sistem operasi yang anda ingin butkan di "
"sini."
#: kde-qt-common/images.cpp:216
msgid "Enter the label (name) of the operating system here."
msgstr "Masukkan label (nama) sistem operasi di sini."
#: kde-qt-common/images.cpp:297
msgid "Dis&k:"
msgstr "&Cakera:"
#: kde-qt-common/mainwidget.cpp:43
msgid "&General Options"
msgstr "Opsyen &Umum"
#: kde-qt-common/mainwidget.cpp:44
msgid "&Operating Systems"
msgstr "Sistem &Operasi"
#: kde-qt-common/mainwidget.cpp:45 kde-qt-common/mainwidget.cpp:65
#: kde-qt-common/mainwidget.cpp:94 kde-qt-common/mainwidget.cpp:100
msgid "&Expert"
msgstr "&Pakar"
#: kde-qt-common/mainwidget.cpp:96 kde-qt-common/mainwidget.cpp:104
msgid "&General options"
msgstr "Opsyen &umum"
#: kde-qt-common/mainwidget.cpp:98 kde-qt-common/mainwidget.cpp:102
msgid "&Operating systems"
msgstr "Sistem &operasi"
#: kde/Details.cpp:44 qt/Details.cpp:44
msgid "&Graphics mode on text console:"
msgstr "Mod &grafik dalam konsol teks:"
#: kde/Details.cpp:47 qt/Details.cpp:47
msgid ""
"You can select the graphics mode for this kernel here."
"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
"boot time."
msgstr ""
"Anda boleh pilih mod grafik bagi kernel ini di sini."
"<br>Jika anda ingin menggunakan mod grafik VGA, anda mesti kompil kernel dengan "
"sokongan bagi peranti penimbal bingkai. Seting <i>tanya</i> "
"menimbulkan penggesa semasa but."
#: kde/Details.cpp:75 qt/Details.cpp:76
msgid "Mount root filesystem &read-only"
msgstr "Lekapkan sistem fail root &baca-sahaja"
#: kde/Details.cpp:76 qt/Details.cpp:77
msgid ""
"Mount the root filesystem for this kernel read-only. Since the init scripts "
"normally take care of remounting the root filesystem in read-write mode after "
"running some checks, this should always be turned on."
"<br>Don't turn this off unless you know what you're doing."
msgstr ""
"Lekapkan sistem fail root bagi baca-sahaja kernel ini. Oleh sebab skrip mula "
"biasanya menangani pelekapan semula sistem fail root dalam mod baca-tulis "
"selepas menjalankan beberapa semakan, mod akan sentiasa dibuka."
"<br> Jangan tutup mod ini sehingga anda tahu apa yang anda lakukan."
#: kde/Details.cpp:78 qt/Details.cpp:80
msgid "Do not check &partition table"
msgstr "Jangan tandakan jadual &petakan"
#: kde/Details.cpp:79
msgid ""
"This turns off some sanity checks while writing the configuration. This should "
"not be used under \"normal\" circumstances, but it can be useful, for example, "
"by providing the capability of booting from a floppy disk, without having a "
"floppy in the drive every time you run lilo."
"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
msgstr ""
"Ini akan menutup sesetengah semakan waras semasa menulis konfigurasi. Ini "
"hendaklah digunakan di bawah keadaan \"biasa\", tetapi ia boleh jadi berguna, "
"misalnya, dengan menyediakan keupayaan membut dari cakera liut, tanpa cakera "
"liut berada di dalam pemacu setiap kali anda menjalankan lilo."
"<br> Ini mengeset kata kunci <i>tak selamat</i> dalam lilo.conf."
#: kde/Details.cpp:83 qt/Details.cpp:86
msgid ""
"Checking this box enables automatic recording of boot command lines as the "
"default for the following bootups. This way, lilo \"locks\" on a choice until "
"it is manually overridden."
"<br>This sets the <b>lock</b> option in lilo.conf"
msgstr ""
"Menandakan kotak ini mengaktifkan perakaman baris arahan but secara automatik "
"bagi but yang berikut. Dengan ini, lilo \"mempasak\" menurut pilihan sehingga "
"ia diatasi secara manual."
"<br>Ini mengeset <b>pilihan</b> pasak dalam lilo.conf"
#: kde/Details.cpp:86 qt/Details.cpp:89
msgid ""
"If this box is checked, a password (entered below) is required only if any "
"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
"linux single</i> or <i>linux init=/bin/sh</i>).\n"
"This sets the <b>restricted</b> option in lilo.conf."
msgstr ""
"Jika kotak ini ditanda, kata laluan (dimasukkan di bawah) diperlukan hanya jika "
"mana-mana parameter diubah (iaitu, pengguna boleh but <i>linux</i>"
", tetapi tidak <i>linux tunggal</i> atau <i>linux init=/bin/sh</i>).\n"
"Ini mengeset <b>pilihan</b> terhad dalam lilo.conf."
#: kde/Details.cpp:94 qt/Details.cpp:98
msgid ""
"Enter the password required for bootup (if any) here. If <i>restricted</i> "
"above is checked, the password is required for additional parameters only."
"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
"You'll want to make sure nobody untrusted can read this file. Also, you "
"probably don't want to use your normal/root password here."
msgstr ""
"Masukkan kata laluan yang diperlukan untuk but (jika ada) di sini. Jika <i>"
"terhad</i> di atas ditandakan, kata laluan diperlukan hanya untuk parameter "
"tambahan sahaja."
"<br><b>AMARAN:</b> Kata laluan disimpan dalam teks jelas dalam /etc/lilo.conf. "
"Anda perlu pastikan tiada siapa pun yang tidak dipercayai dapat membaca fail "
"ini. Juga, anda mungkin tidak mahu guna kata laluan biasa/root anda di sini."
#: kde/kcontrol.cpp:48
msgid "kcmlilo"
msgstr "kcmlilo"
#: kde/kcontrol.cpp:48
msgid "LILO Configuration"
msgstr "Konfigurasi LILO"
#: kde/kcontrol.cpp:50
msgid "(c) 2000, Bernhard Rosenkraenzer"
msgstr "(c) 2000, Bernhard Rosenkraenzer"
#: qt/Details.cpp:81
msgid ""
"This turns off some sanity checks while writing the configuration. This "
"shouldn't be used under \"normal\" circumstances, but it's useful, for example, "
"for installing the possibility to boot from a floppy disk without having a "
"floppy in the drive every time you run lilo."
"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
msgstr ""
"Ini menutup sesetengah semakan waras semasa menulis konfigurasi. Ini tidak "
"boleh digunakan di bawah keadaan \"biasa\", tetapi ia berguna, misalnya, untuk "
"memasang kemungkinan untuk membut dari cakera liut tanpa cakera liut berada di "
"dalam pemacu setiap kali anda ingin menjalankan lilo."
"<br>Ini mengeset kata kunci <i>tak selamat</i> dalam lilo.conf."
#: qt/standalone.cpp:41
#, fuzzy
msgid "&What's This?"
msgstr "&Apakah ini?"
#: qt/standalone.cpp:43
#, fuzzy
msgid ""
"The <i>What's This?</i> button is part of this program's help system. Click on "
"the What's This? button then on any widget in the window to get information "
"(like this) on it."
msgstr ""
"Butang <i>Apakah Ini?</i> merupakan sebahagian daripada sistem bantuan program. "
"Klik butang Apakah Ini, kemudian dapatkan maklumat (seperti ini) tentangnya "
"dalam mana-mana widget dalam tetingkap."
#: qt/standalone.cpp:47
msgid ""
"This button calls up the program's online help system. If it does nothing, no "
"help file has been written (yet); in that case, use the <i>What's This</i> "
"button on the left."
msgstr ""
"Butang ini memanggil sistem bantuan dalam talian program. Jika ia tidak "
"melakukan apa-apa, tiada bantuan ditulis (belum lagi); dalam kes ini, guna "
"butang <i>Apakah Ini</i> di sebelah kiri."
#: qt/standalone.cpp:49
msgid "&Default"
msgstr "&Piawai"
#: qt/standalone.cpp:50
msgid ""
"This button resets all parameters to some (hopefully sane) default values."
msgstr ""
"Butang ini mengeset semula semua parameter bagi sesetengah nilai piawai."
#: qt/standalone.cpp:52
msgid "&Reset"
msgstr "&Set semula"
#: qt/standalone.cpp:53
msgid ""
"This button resets all parameters to what they were before you started the "
"program."
msgstr ""
"Butang ini mengeset semula semua parameter seperti sebelum anda mulakan "
"program."
#: qt/standalone.cpp:56
msgid "This button saves all your changes without exiting."
msgstr "Butang ini menyimpan semua perubahan anda tanpa perlu keluar program."
#: qt/standalone.cpp:59
msgid "This button saves all your changes and exits the program."
msgstr "Butang ini menyimpan semua perubahan anda dan keluar dari program."
#: qt/standalone.cpp:62
msgid "This button exits the program without saving your changes."
msgstr "Butang ini keluar dari program tanpa menyimpan perubahan anda."
#: _translatorinfo.cpp:1
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "MIMOS"
#: _translatorinfo.cpp:3
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "opensource@mimos.my"