You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tde-i18n/tde-i18n-zh_TW/messages/tdewebdev/kxsldbg.po

1859 lines
55 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# translation of kxsldbg.po to Chinese Traditional
#
# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
msgid ""
msgstr ""
"Project-Id-Version: kxsldbg\n"
"POT-Creation-Date: 2020-05-11 04:14+0200\n"
"PO-Revision-Date: 2006-09-12 15:06+0800\n"
"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
"dot tw>\n"
"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"
#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Frank Weng (a.k.a. Franklin)"
#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "franklin at goodhorse dot idv dot tw"
#: kxsldbg.cpp:67
msgid "&XSLDbg Handbook"
msgstr ""
#: kxsldbg.cpp:76
msgid "Could not find our part."
msgstr "無法找到 Part。"
#: kxsldbg.cpp:176
msgid "File: %1 Line: %2 Col: %3"
msgstr "檔案:%1 行:%2 欄:%3"
#: kxsldbgpart/kxsldbg_part.cpp:87 kxsldbgpart/kxsldbg_part.cpp:634
#: kxsldbgpart/kxsldbg_part.cpp:636
msgid "Goto XPath"
msgstr "跳到 XPath"
#: kxsldbgpart/kxsldbg_part.cpp:95 kxsldbgpart/xsldbgglobalvariables.ui:185
#: kxsldbgpart/xsldbglocalvariables.ui:122
#, no-c-format
msgid "Evaluate"
msgstr "計算"
#: kxsldbgpart/kxsldbg_part.cpp:109
msgid "Configure Editor..."
msgstr "設定編輯器..."
#: kxsldbgpart/kxsldbg_part.cpp:113
msgid "Configure..."
msgstr "設定..."
#: kxsldbgpart/kxsldbg_part.cpp:118
msgid "Inspect..."
msgstr "檢查..."
#: kxsldbgpart/kxsldbg_part.cpp:125
msgid "Run"
msgstr "執行"
#: kxsldbgpart/kxsldbg_part.cpp:135
msgid "Step"
msgstr "走一步"
#: kxsldbgpart/kxsldbg_part.cpp:140 kxsldbgpart/xsldbgconfig.ui:261
#, no-c-format
msgid "Next"
msgstr "下一步"
#: kxsldbgpart/kxsldbg_part.cpp:145
msgid "Step Up"
msgstr "往上走一步"
#: kxsldbgpart/kxsldbg_part.cpp:150
msgid "Step Down"
msgstr "往下走一步"
#: kxsldbgpart/kxsldbg_part.cpp:156
msgid "Break"
msgstr "中斷"
#: kxsldbgpart/kxsldbg_part.cpp:161
msgid "Enable/Disable"
msgstr "開啟/關閉"
#: kxsldbgpart/kxsldbg_part.cpp:171
msgid "&Source"
msgstr "源碼(&S)"
#: kxsldbgpart/kxsldbg_part.cpp:176
msgid "&Data"
msgstr "資料(&D)"
#: kxsldbgpart/kxsldbg_part.cpp:181
msgid "&Output"
msgstr "輸出(&O)"
#: kxsldbgpart/kxsldbg_part.cpp:186
msgid "Reload Current File From Disk"
msgstr "從磁碟重新載入目前的檔案"
#: kxsldbgpart/kxsldbg_part.cpp:192
msgid "Walk Through Stylesheet..."
msgstr "走過樣式表..."
#: kxsldbgpart/kxsldbg_part.cpp:196
msgid "Stop Wal&king Through Stylesheet"
msgstr "停止走過樣式表(&K)"
#: kxsldbgpart/kxsldbg_part.cpp:200
msgid "Tr&ace Execution of Stylesheet"
msgstr "追蹤樣式表的執行(&A)"
#: kxsldbgpart/kxsldbg_part.cpp:204
msgid "Stop Tracing of Stylesheet"
msgstr "停止追蹤樣式表的執行"
#: kxsldbgpart/kxsldbg_part.cpp:209
msgid "&Evaluate Expression..."
msgstr "計算表示式(&E)"
#: kxsldbgpart/kxsldbg_part.cpp:214
msgid "Goto &XPath..."
msgstr "跳到 XPath(&X)..."
#: kxsldbgpart/kxsldbg_part.cpp:219
msgid "Lookup SystemID..."
msgstr "搜尋系統代碼..."
#: kxsldbgpart/kxsldbg_part.cpp:224
msgid "Lookup PublicID..."
msgstr "搜尋公開代碼..."
#: kxsldbgpart/kxsldbg_part.cpp:277
msgid "KXsldbgPart"
msgstr "KXsldbgPart"
#: kxsldbgpart/kxsldbg_part.cpp:358
msgid "Debugger Not Ready"
msgstr "除錯器未就緒"
#: kxsldbgpart/kxsldbg_part.cpp:359
msgid "Configure and start the debugger first."
msgstr "請先設定並啟動除錯器。"
#: kxsldbgpart/kxsldbg_part.cpp:376 kxsldbgpart/kxsldbg_part.cpp:382
msgid "Lookup SystemID"
msgstr "搜尋系統代碼"
#: kxsldbgpart/kxsldbg_part.cpp:377 kxsldbgpart/kxsldbg_part.cpp:383
msgid "Please enter SystemID to find:"
msgstr "請輸入要尋找的系統代碼:"
#: kxsldbgpart/kxsldbg_part.cpp:408 kxsldbgpart/kxsldbg_part.cpp:413
msgid "Lookup PublicID"
msgstr "搜尋公開代碼"
#: kxsldbgpart/kxsldbg_part.cpp:409 kxsldbgpart/kxsldbg_part.cpp:414
msgid "Please enter PublicID to find:"
msgstr "請輸入要尋找的公開代碼:"
#: kxsldbgpart/kxsldbg_part.cpp:622 kxsldbgpart/kxsldbg_part.cpp:624
msgid "Evalute Expression"
msgstr "計算表示式"
#: kxsldbgpart/kxsldbg_part.cpp:622 kxsldbgpart/kxsldbg_part.cpp:624
#: kxsldbgpart/kxsldbg_part.cpp:634 kxsldbgpart/kxsldbg_part.cpp:636
msgid "XPath:"
msgstr "XPath"
#: kxsldbgpart/kxsldbg_part.cpp:738 kxsldbgpart/libxsldbg/xsldbg.cpp:591
msgid "Error: Too many file names supplied via command line.\n"
msgstr "錯誤:命令列中指定了太多檔名。\n"
#: kxsldbgpart/kxsldbg_part.cpp:802
msgid "SystemID or PublicID Resolution Result"
msgstr "系統代碼或公開代碼解析結果"
#: kxsldbgpart/kxsldbg_part.cpp:803
#, c-format
msgid ""
"SystemID or PublicID has been resolved to\n"
".%1"
msgstr ""
"系統代碼或公開代碼已轉換成\n"
".%1"
#: kxsldbgpart/libxsldbg/breakpoint.cpp:623
msgid "disabled"
msgstr "已關閉"
#: kxsldbgpart/libxsldbg/breakpoint.cpp:624
msgid "enabled"
msgstr "已開啟"
#: kxsldbgpart/libxsldbg/breakpoint.cpp:643
msgid ""
"Breakpoint %1 %2 for template: \"%3\" mode: \"%4\" in file \"%5\" at line %6"
msgstr "中斷點 %1 %2 樣本:\"%3\" 模式:\"%4\" 檔案:\"%5\" 行號:%6"
#: kxsldbgpart/libxsldbg/breakpoint.cpp:645
msgid "Breakpoint %1 %2 for template: \"%3\" mode: \"%4\""
msgstr "中斷點 %1 %2 樣本:\"%3\" 模式:\"%4\""
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:94
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:345
msgid "Failed to add breakpoint."
msgstr "加入中斷點失敗。"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:97
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:352
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:800
#: kxsldbgpart/libxsldbg/debugXSL.cpp:510
msgid "Error: Debugger has no files loaded. Try reloading files.\n"
msgstr "錯誤:除錯器未載入檔案。請試著重新載入檔案。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:113
msgid "Error: Unable to parse %1 as a number of frames.\n"
msgstr "錯誤:無法剖析 %1 為框架數量。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:151
msgid "Error: Stylesheet is not valid or file is not loaded.\n"
msgstr "錯誤:樣式表不合法,或是檔案未載入。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:191
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:215
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:302
msgid ""
"Warning: Breakpoint for file \"%1\" at line %2 does not seem to be valid.\n"
msgstr "警告:檔案 \"%1\" 在行號 %2 的中斷點似乎不合法。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:213
msgid "Error: Unable to find a stylesheet file whose name contains %1.\n"
msgstr "錯誤:無法找到名稱內包含 %1 的樣式表檔案。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:223
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:318
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:1031
#: kxsldbgpart/libxsldbg/debugXSL.cpp:679
#: kxsldbgpart/libxsldbg/debugXSL.cpp:713
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1237
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1340 kxsldbgpart/libxsldbg/files.cpp:1353
#: kxsldbgpart/libxsldbg/files_unix.cpp:61
#: kxsldbgpart/libxsldbg/files_unix.cpp:153
#: kxsldbgpart/libxsldbg/search.cpp:106 kxsldbgpart/libxsldbg/search.cpp:1191
#: kxsldbgpart/libxsldbg/search.cpp:1254 kxsldbgpart/libxsldbg/search.cpp:1315
#: kxsldbgpart/libxsldbg/search.cpp:1367 kxsldbgpart/libxsldbg/search.cpp:1415
#: kxsldbgpart/libxsldbg/search.cpp:1469 kxsldbgpart/libxsldbg/search.cpp:1515
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:105
#: kxsldbgpart/libxsldbg/xsldbg.cpp:512 kxsldbgpart/libxsldbg/xsldbg.cpp:1069
msgid "Error: Out of memory.\n"
msgstr "錯誤:記憶體用盡。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:249
msgid "Error: Data file is invalid. Try the run command first.\n"
msgstr "錯誤:資料檔不合法。請試著先使用 run 命令。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:304
msgid "Error: Unable to find a data file whose name contains %1.\n"
msgstr "錯誤:無法找到名稱內包含 %1 的資料檔案。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:375
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:695
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:821
#: kxsldbgpart/libxsldbg/param_cmds.cpp:107
msgid "Error: Unable to parse %1 as a line number.\n"
msgstr "錯誤:無法剖析 %1 為行號。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:419
msgid "Error: Unable to find the added breakpoint."
msgstr "錯誤:找不到新增的中斷點。"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:425
#: kxsldbgpart/libxsldbg/search.cpp:484 kxsldbgpart/libxsldbg/trace_cmds.cpp:68
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:111
msgid "Error: Invalid arguments to command %1.\n"
msgstr "錯誤:命令 %1 的參數不合法。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:527
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:722
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:848
msgid "Error: Invalid arguments for command %1.\n"
msgstr "錯誤:命令 %1 有不合法的參數。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:596
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:952
msgid ""
"Information: Breakpoint validation has caused breakpoint %1 to be re-"
"created.\n"
msgstr "資訊:中斷點檢查造成中斷點 %1 被重新建立。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:603
msgid "Warning: Breakpoint exits for file \"%1\" at line %2.\n"
msgstr "警告:檔案 %1 行號 %2 的中斷點離開。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:626
msgid "Error: No templates found or unable to add breakpoint.\n"
msgstr "錯誤:找不到樣本,或無法加入中斷點。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:631
#, c-format
msgid ""
"_n: Information: Added %n new breakpoint.\n"
"Information: Added %n new breakpoints."
msgstr "資訊:已新增 %n 中斷點。"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:651
msgid "Error: Failed to add breakpoint for file \"%1\" at line %2.\n"
msgstr "錯誤:加入中斷點到檔案 \"%1\" 行號 %2 失敗。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:653
msgid "Error: Failed to add breakpoint.\n"
msgstr "錯誤:加入中斷點失敗。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:677
msgid "Failed to delete breakpoint."
msgstr "刪除中斷點失敗。"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:714
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:842
msgid "Error: Breakpoint does not exist for file \"%1\" at line %2.\n"
msgstr "錯誤:中斷點不存在於檔案 %1 行號 %2。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:735
msgid "Error: Unable to delete breakpoint %1.\n"
msgstr "錯誤:無法刪除中斷點 %1。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:738
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:864
msgid "Error: Breakpoint %1 does not exist.\n"
msgstr "錯誤:中斷點 %1 不存在。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:745
msgid "Error: Unable to delete breakpoint at template %1.\n"
msgstr "錯誤:無法刪除樣本 %1 的中斷點。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:748
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:871
msgid "Error: Breakpoint at template \"%1\" does not exist.\n"
msgstr "錯誤:樣本 %1 的中斷點不存在。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:797
msgid "Failed to enable/disable breakpoint."
msgstr "開啟/關閉中斷點失敗。"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:861
msgid "Error: Unable to enable/disable breakpoint %1.\n"
msgstr "錯誤:無法開啟/關閉中斷點 %1。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:956
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:995
msgid "Warning: Validation of breakpoint %1 failed.\n"
msgstr "警告:中斷點 %1 檢查失敗。\n"
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:984
msgid ""
"Information: Breakpoint validation has caused one or more breakpoints to be "
"re-created.\n"
msgstr "資訊:中斷點檢查造成一個或多個中斷點重新建立。\n"
#: kxsldbgpart/libxsldbg/debug.cpp:135
msgid "Error: XSLT source and XML data are empty. Cannot enter the debugger.\n"
msgstr "錯誤XSLT 來源與 XML 資料為空的。無法進入除錯器。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:532
msgid "Error: The XSLT template named \"%1\" was not found.\n"
msgstr "錯誤:找不到名為 \"%1\" 的 XSLT 樣本。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:535
msgid " template: \"%1\"\n"
msgstr " 樣本: \"%1\"\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:560
#: kxsldbgpart/libxsldbg/debugXSL.cpp:566
msgid "Error: Unable to cd. No stylesheet loaded.\n"
msgstr "錯誤:無法切換目錄。未載入樣式表。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:563
msgid "Error: Unknown arguments to the command %1.\n"
msgstr "錯誤:命令 %1 有未知的參數。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:585
msgid "Error: Invalid arguments to the command %1.\n"
msgstr "錯誤:命令 %1 有不合法的參數。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:606
msgid ""
"_n: Warning: XPath %1 is a Node Set with %n child.\n"
"Warning: XPath %1 is a Node Set with %n children."
msgstr "警告XPath %1 是一個節點集,有 %n 個子節點。"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:608
msgid "Warning: XPath %1 is an empty Node Set.\n"
msgstr "警告XPath %1 是空的節點集。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:617
msgid "Error: XPath %1 was not found.\n"
msgstr "錯誤:找不到 XPath %1。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:672
#: kxsldbgpart/libxsldbg/debugXSL.cpp:675
#: kxsldbgpart/libxsldbg/debugXSL.cpp:706
msgid "#%1 template: \"%2\" mode: \"%3\""
msgstr "#%1 樣本:\"%2\" 模式:\"%3\""
#: kxsldbgpart/libxsldbg/debugXSL.cpp:677
#: kxsldbgpart/libxsldbg/debugXSL.cpp:694
#: kxsldbgpart/libxsldbg/debugXSL.cpp:709
#: kxsldbgpart/libxsldbg/debugXSL.cpp:762
msgid " in file \"%1\" at line %2\n"
msgstr "檔案:\"%1\" 行號: %2\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:692
msgid "#%1 template: \"LIBXSLT_DEFAULT\" mode: \"\""
msgstr "#%1 樣本:\"LIBXSLT_DEFAULT\" 模式:\"\""
#: kxsldbgpart/libxsldbg/debugXSL.cpp:735
msgid "\tNo items in call stack.\n"
msgstr "\t呼叫堆疊中沒有項目。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:758
msgid "#%1 template: \"%2\""
msgstr "#%1 樣本: \"%2\""
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1025
msgid "Information: Updating search database. This may take a while...\n"
msgstr "資訊:更新搜尋資料庫中。可能要花一點時間...\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1028
msgid "Information: Looking for breakpoints.\n"
msgstr "資訊:搜尋中斷點中。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1030
msgid "Information: Looking for imports and top-level stylesheets.\n"
msgstr "資訊:搜尋匯入與頂層的樣式表中。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1032
msgid "Information: Looking for xsl:includes.\n"
msgstr "資訊:搜尋 xsl:includes 中。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1034
msgid "Information: Looking for templates.\n"
msgstr "資訊:搜尋樣本中。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1036
msgid "Information: Looking for global variables.\n"
msgstr "資訊:搜尋全域變數中。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1038
msgid "Information: Looking for local variables.\n"
msgstr "資訊:搜尋本地端變數中。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1040
msgid "Information: Formatting output.\n"
msgstr "資訊:格式化輸出中。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1108
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1118
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1136
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1138
msgid ""
"\n"
"Reached template: \"%1\" mode: \"%2\"\n"
msgstr ""
"\n"
"已到達樣本:\"%1\" 模式:\"%2\"\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1295
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2091
msgid "Breakpoint for file \"%1\" at line %2.\n"
msgstr "檔案 \"%1\" 的中斷點,在行號:%2。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1297
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2093
msgid "Breakpoint at text node in file \"%1\".\n"
msgstr "檔案 \"%1\" 中的文字節點的中斷點。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1460
msgid ""
"Unable to print local help. Online help can be found at http://xsldbg."
"sourceforge.net/docs/index.html.\n"
msgstr ""
"無法列印本地端說明文件。您可以在 http://xsldbg.sourceforge.net/docs/index."
"html 找到線上的說明文件。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1613
msgid ""
"\n"
"No breakpoints are set for the file.\n"
msgstr ""
"\n"
"此檔案沒有設定中斷點。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1615
#, c-format
msgid ""
"_n: \tTotal of %n breakpoint present.\n"
"\tTotal of %n breakpoints present."
msgstr "\t總共有 %n 個中斷點。"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1634
msgid "Error: Unable to delete breakpoint.\n"
msgstr "錯誤:無法刪除中斷點。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1656
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1676
msgid "Error: Unable to enable/disable breakpoint.\n"
msgstr "錯誤:無法開啟/關閉中斷點。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1709
msgid " in file \"%1\" at line %2"
msgstr "檔案:\"%1\" 行號:%2"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1717
msgid "Error: Unable to print working directory.\n"
msgstr "錯誤:無法列印工作目錄。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1737
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1759
msgid "Error: Need to use the run command first.\n"
msgstr "錯誤:需要先使用 run 命令。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1794
msgid "Load of source deferred. Use the run command.\n"
msgstr "載入源碼發生延遲。請使用 run 命令。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1834
msgid "Load of data file deferred. Use the run command.\n"
msgstr "載入資料檔發生延遲。請使用 run 命令。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1888
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1901
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2061
#: kxsldbgpart/libxsldbg/file_cmds.cpp:248
#: kxsldbgpart/libxsldbg/file_cmds.cpp:265
#: kxsldbgpart/libxsldbg/param_cmds.cpp:52
#: kxsldbgpart/libxsldbg/param_cmds.cpp:71
#: kxsldbgpart/libxsldbg/param_cmds.cpp:101
#: kxsldbgpart/libxsldbg/param_cmds.cpp:115
msgid "Error: Invalid arguments for the command %1.\n"
msgstr "錯誤:命令 %1 的參數不合法。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1911
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1932
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1940
msgid "Warning: The %1 command is disabled.\n"
msgstr "警告:命令 %1 已關閉。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1996
msgid "Opening terminal %1.\n"
msgstr "開啟終端機 %1。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2012
#: kxsldbgpart/libxsldbg/file_cmds.cpp:213
#: kxsldbgpart/libxsldbg/file_cmds.cpp:269
#: kxsldbgpart/libxsldbg/option_cmds.cpp:113
#: kxsldbgpart/libxsldbg/option_cmds.cpp:116
#: kxsldbgpart/libxsldbg/os_cmds.cpp:48
msgid "Error: Missing arguments for the command %1.\n"
msgstr "錯誤:命令 %1 缺少參數。\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2016
msgid "Warning: The %1 command is disabled\n"
msgstr "警告:命令 %1 已關閉\n"
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2080
msgid "Error: Unknown command %1. Try help.\n"
msgstr "錯誤:未知的命令 %1。請找說明文件。\n"
#: kxsldbgpart/libxsldbg/file_cmds.cpp:71
msgid "Entity %1 "
msgstr "實體 %1"
#: kxsldbgpart/libxsldbg/file_cmds.cpp:78
msgid "No external General Parsed entities present.\n"
msgstr "沒有看到外部的「一般剖析」General Parsed實體。\n"
#: kxsldbgpart/libxsldbg/file_cmds.cpp:80
#, c-format
msgid ""
"_n: \tTotal of %n entity found.\n"
"\tTotal of %n entities found."
msgstr "\t總共找到 %n 個實體。"
#: kxsldbgpart/libxsldbg/file_cmds.cpp:121
#: kxsldbgpart/libxsldbg/file_cmds.cpp:129
msgid "SystemID \"%1\" was not found in current catalog.\n"
msgstr "在目前的目錄中找不到系統代碼 %1。\n"
#: kxsldbgpart/libxsldbg/file_cmds.cpp:125
msgid "SystemID \"%1\" maps to: \"%2\"\n"
msgstr "系統代碼 \"%1\" 映射到:\"%2\"\n"
#: kxsldbgpart/libxsldbg/file_cmds.cpp:168
#: kxsldbgpart/libxsldbg/file_cmds.cpp:176
msgid "PublicID \"%1\" was not found in current catalog.\n"
msgstr "在目前的目錄中找不到公開代碼 \"%1\"。\n"
#: kxsldbgpart/libxsldbg/file_cmds.cpp:172
msgid "PublicID \"%1\" maps to: \"%2\"\n"
msgstr "公開代碼 \"%1\" 映射到:\"%2\"\n"
#: kxsldbgpart/libxsldbg/files.cpp:192 kxsldbgpart/libxsldbg/files.cpp:215
msgid "Error: Unable to open terminal %1.\n"
msgstr "錯誤:無法開啟終端機 %1。\n"
#: kxsldbgpart/libxsldbg/files.cpp:195
msgid "Error: Did not previously open terminal.\n"
msgstr "錯誤:先前未開啟終端機。\n"
#: kxsldbgpart/libxsldbg/files.cpp:497
msgid "Error: The file name \"%1\" is too long.\n"
msgstr "錯誤:檔案名稱 \"%1\" 太長。\n"
#: kxsldbgpart/libxsldbg/files.cpp:521
msgid "Error: Unable to change to directory %1.\n"
msgstr "錯誤:無法變換到目錄 %1。\n"
#: kxsldbgpart/libxsldbg/files.cpp:524
msgid "Changed to directory %1.\n"
msgstr "變換到目錄 %1。\n"
#: kxsldbgpart/libxsldbg/files.cpp:552
msgid "Setting XML Data file name to %1.\n"
msgstr "設定 XML 資料檔案名稱為 %1。\n"
#: kxsldbgpart/libxsldbg/files.cpp:564
msgid "Setting stylesheet file name to %1.\n"
msgstr "設定樣式表檔案名稱為 %1。\n"
#: kxsldbgpart/libxsldbg/files.cpp:581
msgid "Setting stylesheet base path to %1.\n"
msgstr "設定樣式表基礎路徑為 %1。\n"
#: kxsldbgpart/libxsldbg/files.cpp:598
msgid "Missing file name.\n"
msgstr "缺少檔名。\n"
#: kxsldbgpart/libxsldbg/files.cpp:1108 kxsldbgpart/libxsldbg/files.cpp:1143
msgid "Encoding of text failed.\n"
msgstr "文字編碼失敗。\n"
#: kxsldbgpart/libxsldbg/files.cpp:1179
#, c-format
msgid "Unable to initialize encoding %1."
msgstr "無法初始化編碼 %1。"
#: kxsldbgpart/libxsldbg/files.cpp:1184
msgid "Invalid encoding %1.\n"
msgstr "不合法的編碼 %1。\n"
#: kxsldbgpart/libxsldbg/files.cpp:1245
msgid " ----- more ---- \n"
msgstr " ----- 更多 ----- \n"
#: kxsldbgpart/libxsldbg/files.cpp:1363
msgid "Error: Unable to convert %1 to local file name.\n"
msgstr "錯誤:無法轉換 %1 為本地端檔案名稱。\n"
#: kxsldbgpart/libxsldbg/files_unix.cpp:67
msgid "Error: USER environment variable is not set.\n"
msgstr "錯誤:使用者環境變數未設定。\n"
#: kxsldbgpart/libxsldbg/files_unix.cpp:199
msgid ""
"Error: The value of the option docspath or searchresultspath is empty. See "
"help on setoption or options command for more information.\n"
msgstr ""
"錯誤docspath 或 searchresultspath 選項值是空的。詳情請參考 setoption 說明"
"或 options 命令的說明。\n"
#: kxsldbgpart/libxsldbg/help_unix.cpp:51
#: kxsldbgpart/libxsldbg/help_unix.cpp:56
msgid "xsldbg version"
msgstr "xsldbg 版本"
#: kxsldbgpart/libxsldbg/help_unix.cpp:52
#: kxsldbgpart/libxsldbg/help_unix.cpp:57
msgid "Help document version"
msgstr "說明文件版本"
#: kxsldbgpart/libxsldbg/help_unix.cpp:53
#: kxsldbgpart/libxsldbg/help_unix.cpp:58
msgid "Help not found for command"
msgstr "找不到說明文件:命令"
#: kxsldbgpart/libxsldbg/help_unix.cpp:90
msgid ""
"Error: Unable to display help. Help files not found in %1 or xsldbg not "
"found in path.\n"
msgstr ""
"錯誤:無法顯示說明。說明檔在 %1 內找不到,或是 xsldbg 在路徑中找不到。\n"
#: kxsldbgpart/libxsldbg/help_unix.cpp:92
msgid "Error: Unable to find xsldbg or help files.\n"
msgstr "錯誤:找不到 xsldbg 或說明檔。\n"
#: kxsldbgpart/libxsldbg/help_unix.cpp:97
msgid "Error: Unable to print help file.\n"
msgstr "錯誤:無法列印說明檔。\n"
#: kxsldbgpart/libxsldbg/help_unix.cpp:102
msgid "Error: No path to documentation; aborting help.\n"
msgstr "錯誤:沒有文件路徑,取消說明。\n"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:140
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:243
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:383
msgid "Error: XPath %1 results in an empty Node Set.\n"
msgstr "錯誤XPath %1 導致一個空的節點集合。\n"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:175
msgid ""
"Information: Temporarily setting document's encoding to UTF-8. Previously "
"was %1.\n"
msgstr "資訊:暫時設定文件編碼為 UTF-8。先前為 %1。\n"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:229
msgid "Error: Unable to save temporary results to %1.\n"
msgstr "錯誤:無法儲存暫時結果到 %1。\n"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:251
msgid "NULL string value supplied."
msgstr "提供了 NULL 字串。"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:262
msgid "Unable to convert XPath to string."
msgstr "無法轉換 XPath 為字串。"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:358
msgid ""
"Warning: Unable to print expression. No stylesheet was properly loaded.\n"
msgstr "警告:無法列印表示式。無法正確載入樣式表。\n"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:418
msgid " Global %1\n"
msgstr " 全域 %1\n"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:421
msgid " Global "
msgstr " 全域 "
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:424
msgid " Global = %1\n"
msgstr " 全域 = %1\n"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:427
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:430
msgid ""
" Global = %1\n"
"%2"
msgstr ""
" 全域 = %1\n"
"%2"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:430
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:568
msgid "Warning: No value assigned to variable.\n"
msgstr "警告:沒有指定值給變數。\n"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:483
msgid ""
"Error: Debugger has no files loaded or libxslt has not reached a template.\n"
"Try reloading files or taking more steps.\n"
msgstr ""
"錯誤:除錯器未載入檔案,或是 libxslt 未取得樣本。\n"
"請試著重新載入檔案,或多做幾個步驟。\n"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:520
msgid ""
"Error: Libxslt has not initialized variables yet; try stepping to a "
"template.\n"
msgstr "錯誤Libxslt 尚未初始化變數。請試著進入樣本。\n"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:556
#, c-format
msgid " Local %1"
msgstr " 本地端 %1"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:559
msgid " Local "
msgstr " 本地端 "
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:562
msgid " Local = %1\n"
msgstr " 本地端 = %1\n"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:565
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:568
msgid ""
" Local = %1\n"
"%2"
msgstr ""
" 本地端 = %1\n"
"%2"
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:583
msgid ""
"Error: Libxslt has not initialized variables yet; try stepping past the xsl:"
"param elements in the template.\n"
msgstr "錯誤Libxslt 尚未初始化變數。請試著進入樣本中的 xsl:param 元素。\n"
#: kxsldbgpart/libxsldbg/option_cmds.cpp:73
#: kxsldbgpart/libxsldbg/option_cmds.cpp:107
msgid "Error: Unable to parse %1 as an option value.\n"
msgstr "錯誤:無法剖析 %1 為選項值。\n"
#: kxsldbgpart/libxsldbg/option_cmds.cpp:110
msgid "Error: Unknown option name %1.\n"
msgstr "錯誤:未知的選項名稱 %1。\n"
#: kxsldbgpart/libxsldbg/option_cmds.cpp:146
msgid "Option %1 = %2\n"
msgstr "選項 %1 = %2\n"
#: kxsldbgpart/libxsldbg/option_cmds.cpp:157
msgid "Option %1 = \"%2\"\n"
msgstr "選項 %1 = \"%2\"\n"
#: kxsldbgpart/libxsldbg/option_cmds.cpp:159
msgid "Option %1 = \"\"\n"
msgstr "選項 %1 = \"\"\n"
#: kxsldbgpart/libxsldbg/option_cmds.cpp:230
msgid "\tNo expression watches set.\n"
msgstr "\t沒有設定監控表示式。\n"
#: kxsldbgpart/libxsldbg/option_cmds.cpp:237
msgid " WatchExpression %1 "
msgstr " 監控表示式 %1"
#: kxsldbgpart/libxsldbg/option_cmds.cpp:263
msgid ""
"Error: Unable to add watch expression \"%1\". It already has been added or "
"it cannot be watched.\n"
msgstr ""
"錯誤:無法新增監控表示式 \"%1\"。可能因為它已經新增過了,或是它無法被監控。\n"
#: kxsldbgpart/libxsldbg/option_cmds.cpp:287
msgid "Error: Unable to parse %1 as a watchID.\n"
msgstr "錯誤:無法剖析 %1 為監控代碼。\n"
#: kxsldbgpart/libxsldbg/option_cmds.cpp:292
msgid "Error: Watch expression %1 does not exist.\n"
msgstr "錯誤:監控表示式 %1 不存在。\n"
#: kxsldbgpart/libxsldbg/options.cpp:296 kxsldbgpart/libxsldbg/options.cpp:326
msgid "Error: Option %1 is not a valid boolean/integer option.\n"
msgstr "錯誤:選項 %1 不是合法的布林/整數選項。\n"
#: kxsldbgpart/libxsldbg/options.cpp:368 kxsldbgpart/libxsldbg/options.cpp:399
msgid "Error: Option %1 is not a valid string xsldbg option.\n"
msgstr "錯誤:選項 %1 不是合法的字串 xsldbg 選項。\n"
#: kxsldbgpart/libxsldbg/options.cpp:511
msgid " Parameter %1 %2=\"%3\"\n"
msgstr " 參數 %1 %2 = \"%3\"\n"
#: kxsldbgpart/libxsldbg/options.cpp:546
msgid ""
"\n"
"No parameters present.\n"
msgstr ""
"\n"
"沒有參數。\n"
#: kxsldbgpart/libxsldbg/os_cmds.cpp:72
msgid "Error: No command processor available for shell command \"%1\".\n"
msgstr "錯誤shell 命令 \"%1\" 找不到處理器。\n"
#: kxsldbgpart/libxsldbg/os_cmds.cpp:77
msgid "Information: Starting shell command \"%1\".\n"
msgstr "資訊:開始執行 shell 命令 \"%1\"。\n"
#: kxsldbgpart/libxsldbg/os_cmds.cpp:92
msgid "Information: Finished shell command.\n"
msgstr "資訊:已完成 shell 命令。\n"
#: kxsldbgpart/libxsldbg/os_cmds.cpp:96
msgid "Error: Unable to run command. System error %1.\n"
msgstr "錯誤:無法執行命令。系統錯誤 %1。\n"
#: kxsldbgpart/libxsldbg/param_cmds.cpp:48
msgid "Failed to add parameter"
msgstr "加入參數失敗"
#: kxsldbgpart/libxsldbg/param_cmds.cpp:96
msgid "Failed to delete parameter"
msgstr "刪除參數失敗"
#: kxsldbgpart/libxsldbg/param_cmds.cpp:112
msgid "Error: Unable to find parameter %1.\n"
msgstr "錯誤:找不到參數 %1。\n"
#: kxsldbgpart/libxsldbg/param_cmds.cpp:146
msgid "Unable to print parameters"
msgstr "無法列印參數"
#: kxsldbgpart/libxsldbg/search.cpp:407
msgid ""
"Error: Unable to write search Database to file %1. Try setting the "
"\"searchresultspath\" option to a writable path.\n"
msgstr ""
"錯誤:無法將搜尋資料庫寫入檔案 %1。請試著將 searchresultspath 遠項設定為一個"
"可寫入的路徑。\n"
#: kxsldbgpart/libxsldbg/search.cpp:482
msgid "Information: Transformed %1 using %2 and saved to %3.\n"
msgstr "資訊:已使用 %2 轉換 %1 並儲存到 %3。\n"
#: kxsldbgpart/libxsldbg/search.cpp:723
msgid "Error: XSLT template named \"%1\" was not found.\n"
msgstr "錯誤:找不到 XSLT 樣本名稱 \"%1\"。\n"
#: kxsldbgpart/libxsldbg/search_cmds.cpp:52
msgid "Error: No path to documentation; aborting searching.\n"
msgstr "錯誤:沒有文件路徑。搜尋中斷。\n"
#: kxsldbgpart/libxsldbg/search_cmds.cpp:54
msgid "Error: Error in value of USE_DOCS_MACRO; look at Makefile.am.\n"
msgstr "錯誤USE_DOCS_MACRO 的值錯誤。請查看 Makefile.am。\n"
#: kxsldbgpart/libxsldbg/search_cmds.cpp:56
msgid ""
"Error: Required environment variable %1 not set to the directory of xsldbg "
"documentation.\n"
msgstr "錯誤:未將必要的環境變數 %1 設定為 xsldbg 文件的目錄。\n"
#: kxsldbgpart/libxsldbg/search_cmds.cpp:62
msgid "Error: Stylesheet not valid, files not loaded yet?\n"
msgstr "錯誤:樣式表不合法。檔案尚未載入嗎?\n"
#: kxsldbgpart/libxsldbg/template_cmds.cpp:135
msgid " template: \"%1\" mode: \"%2\" in file \"%3\" at line %4\n"
msgstr "樣本:\"%1\" 模式:\"%2\" 檔案:\"%3\" 行號:\"%4\"\n"
#: kxsldbgpart/libxsldbg/template_cmds.cpp:184
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:36
msgid "Error: Stylesheet is not valid.\n"
msgstr "錯誤:樣式表不合法。\n"
#: kxsldbgpart/libxsldbg/template_cmds.cpp:226
msgid "\tNo XSLT templates found.\n"
msgstr "\t找不到 XSLT 樣本。\n"
#: kxsldbgpart/libxsldbg/template_cmds.cpp:228
#, c-format
msgid ""
"_n: \tTotal of %n XSLT template found\n"
"\tTotal of %n XSLT templates found"
msgstr "\t總共找到 %n 個 XSLT 樣本"
#: kxsldbgpart/libxsldbg/template_cmds.cpp:229
#, c-format
msgid ""
"_n: \tTotal of %n XSLT template printed\n"
"\tTotal of %n XSLT templates printed"
msgstr "\t總共列印 %n 個 XSLT 樣本"
#: kxsldbgpart/libxsldbg/template_cmds.cpp:261
#: kxsldbgpart/libxsldbg/template_cmds.cpp:290
msgid " Stylesheet %1\n"
msgstr " 樣式表 %1\n"
#: kxsldbgpart/libxsldbg/template_cmds.cpp:325
#, c-format
msgid ""
"_n: \tTotal of %n XSLT stylesheet found.\n"
"\tTotal of %n XSLT stylesheets found."
msgstr "\t總共找到 %n 個 XSLT 樣式表"
#: kxsldbgpart/libxsldbg/template_cmds.cpp:328
msgid "\tNo XSLT stylesheets found.\n"
msgstr "\t沒有找到任何 XSLT 樣式表。\n"
#: kxsldbgpart/libxsldbg/trace_cmds.cpp:69
msgid "Warning: Assuming normal speed.\n"
msgstr "警告:假設為正常速度。\n"
#: kxsldbgpart/libxsldbg/utils.cpp:111
msgid "Error: Unmatched quotes in input.\n"
msgstr "錯誤:輸入中的引號不對稱。\n"
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:99
msgid ""
"Error: Cannot change a variable that does not use the select attribute.\n"
msgstr "錯誤:無法變更未使用 select 屬性的變數。\n"
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:102
msgid "Error: Variable %1 was not found.\n"
msgstr "錯誤:找不到變數 %1。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:270 kxsldbgpart/libxsldbg/xsldbg.cpp:298
#: kxsldbgpart/libxsldbg/xsldbg.cpp:320
msgid "%1 took %2 ms to complete.\n"
msgstr "%1 花了 %2 毫秒完成。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:361
#, c-format
msgid "XInclude processing %1."
msgstr "XInclude 處理 %1。"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:399 kxsldbgpart/libxsldbg/xsldbg.cpp:446
msgid "Error: Unable to write temporary results to %1.\n"
msgstr "錯誤:無法將暫時結果寫到 %1。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:409
#, c-format
msgid ""
"_n: Applying stylesheet %n time\n"
"Applying stylesheet %n times"
msgstr "套用樣式表 %n 次"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:412
msgid "Applying stylesheet"
msgstr "套用樣式表"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:473 kxsldbgpart/libxsldbg/xsldbg.cpp:491
msgid "Saving result"
msgstr "儲存結果"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:476
msgid "Warning: Generating non-standard output XHTML.\n"
msgstr "警告:產生非標準輸出 XHTML 中。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:493
msgid "Warning: Unsupported, non-standard output method %1.\n"
msgstr "警告:未支援,非標準輸出方法 %1。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:509
msgid "Running stylesheet and saving result"
msgstr "執行樣式表並儲存結果中"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:516
msgid "Error: Unable to save results of transformation to file %1.\n"
msgstr "錯誤:無法儲存轉換結果到檔案 %1。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:558 kxsldbgpart/libxsldbg/xsldbg.cpp:887
#: kxsldbgpart/libxsldbg/xsldbg.cpp:919 kxsldbgpart/libxsldbg/xsldbg.cpp:997
msgid "Fatal error: Aborting debugger due to an unrecoverable error.\n"
msgstr "嚴重錯誤:因為無法修復的錯誤而中止除錯器。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:683
msgid ""
"Warning: Too many libxslt parameters provided via the command line option --"
"param.\n"
msgstr "警告:命令列選項 --param 提供了太多 libxslt 參數。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:692
msgid ""
"Error: Argument \"%1\" to --param is not in the format <name>:<value>.\n"
msgstr "錯誤:--param 參數 \"%1\" 的格式不是 <name>:<value>。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:744
msgid ""
"\n"
"Starting stylesheet\n"
"\n"
msgstr ""
"\n"
"啟動樣式表\n"
"\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:755
msgid "Error: No XSLT source file supplied.\n"
msgstr "錯誤:沒有提供 XSLT 源碼檔案。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:758
msgid "Error: No XML data file supplied.\n"
msgstr "錯誤:沒有提供 XML 資料檔。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:795
msgid ""
"\n"
"Debugger never received control.\n"
msgstr ""
"\n"
"除錯器ˋ無法接收控制。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:800
msgid ""
"\n"
"Finished stylesheet\n"
"\n"
msgstr ""
"\n"
"已完成的樣式表\n"
"\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:857
msgid ""
"Going to the command shell; not all xsldbg commands will work as not all "
"needed have been loaded.\n"
msgstr ""
"到命令列中的話,不是所有的 xsldbg 命令都能使用,因為不是所有需要的東西都能載"
"入。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:914
#, c-format
msgid "Parsing stylesheet %1"
msgstr "剖析樣式表 %1 中"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:916
msgid "Error: Cannot parse file %1.\n"
msgstr "錯誤:無法剖析檔案 %1。\n"
#: kxsldbgpart/libxsldbg/xsldbg.cpp:995 kxsldbgpart/libxsldbg/xsldbg.cpp:1043
msgid "Error: Unable to parse file %1.\n"
msgstr "錯誤:無法剖析檔案 %1。\n"
#: kxsldbgpart/xsldbgbreakpointlistitem.cpp:38
#: kxsldbgpart/xsldbgbreakpoints.ui:81
#, no-c-format
msgid "Enabled"
msgstr "已開啟"
#: kxsldbgpart/xsldbgbreakpointlistitem.cpp:40
msgid "Disabled"
msgstr "已關閉"
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:83
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:92
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:115
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:120
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:143
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:148 kxsldbgpart/xsldbgdebugger.cpp:297
#: kxsldbgpart/xsldbgdebugger.cpp:317 kxsldbgpart/xsldbgdebugger.cpp:335
#: kxsldbgpart/xsldbgdebugger.cpp:355 kxsldbgpart/xsldbgdebugger.cpp:375
#: kxsldbgpart/xsldbgdebugger.cpp:394
msgid "Operation Failed"
msgstr "操作失敗"
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:84
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:116
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:144
msgid "A line number was provided without a file name."
msgstr "提供了行號但沒有檔名。"
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:93
msgid "No details provided or an invalid line number was supplied."
msgstr "沒有提供詳情,或是行號不正確。"
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:121
msgid "No details provided or an invalid line or ID was supplied."
msgstr "沒有提供詳情,或是行號或代碼不正確。"
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:149
msgid "No details provided."
msgstr "沒有提供詳情。"
#: kxsldbgpart/xsldbgconfigimpl.cpp:191
msgid "\t\"XSL source\" \n"
msgstr "\t\"XSL 源碼\"\n"
#: kxsldbgpart/xsldbgconfigimpl.cpp:193
msgid "\t\"XML data\" \n"
msgstr "\t\"XML 資料\"\n"
#: kxsldbgpart/xsldbgconfigimpl.cpp:195
msgid "\t\"Output file\" \n"
msgstr "\t\"輸出檔案\"\n"
#: kxsldbgpart/xsldbgconfigimpl.cpp:197
msgid "Missing values for \n"
msgstr "缺乏值:\n"
#: kxsldbgpart/xsldbgconfigimpl.cpp:201
msgid "Output file is the same as either XSL Source or XML Data file\n"
msgstr "輸出檔案與 XSL 源碼檔或 XML 資料檔相同\n"
#: kxsldbgpart/xsldbgconfigimpl.cpp:220
msgid ""
"The following libxslt parameters are empty\n"
"\t"
msgstr ""
"底下的 libxslt 參數是空的:\n"
"\t"
#: kxsldbgpart/xsldbgconfigimpl.cpp:370
msgid "Choose XSL Source to Debug"
msgstr "選擇要除錯的 XSL 源碼檔"
#: kxsldbgpart/xsldbgconfigimpl.cpp:382
msgid "Choose XML Data to Debug"
msgstr "選擇要除錯的 XML 資料檔"
#: kxsldbgpart/xsldbgconfigimpl.cpp:393
msgid "Choose Output File for XSL Transformation"
msgstr "選擇要做 XSL 轉換的輸出檔"
#: kxsldbgpart/xsldbgconfigimpl.cpp:484
msgid "Suspect Configuration"
msgstr "猜測設定"
#: kxsldbgpart/xsldbgconfigimpl.cpp:488
msgid "Incomplete or Invalid Configuration"
msgstr "不完整或不合法的設定"
#: kxsldbgpart/xsldbgdebugger.cpp:298 kxsldbgpart/xsldbgdebugger.cpp:318
#: kxsldbgpart/xsldbgdebugger.cpp:336 kxsldbgpart/xsldbgdebugger.cpp:356
#: kxsldbgpart/xsldbgdebugger.cpp:376 kxsldbgpart/xsldbgdebugger.cpp:395
msgid "Cannot set/edit breakpoints on the output file."
msgstr "無法設定或編輯輸出檔案的中斷點。"
#: kxsldbgpart/xsldbginspector.cpp:68
msgid "Xsldbg Inspector"
msgstr "Xsldbg 檢查員"
#: kxsldbgpart/xsldbginspector.cpp:77
msgid "Breakpoints"
msgstr "中斷點"
#: kxsldbgpart/xsldbginspector.cpp:83
msgid "Variables"
msgstr "變數"
#: kxsldbgpart/xsldbginspector.cpp:89
msgid "CallStack"
msgstr "呼叫堆疊"
#: kxsldbgpart/xsldbginspector.cpp:95
msgid "Templates"
msgstr "樣本"
#: kxsldbgpart/xsldbginspector.cpp:101
msgid "Sources"
msgstr "源碼"
#: kxsldbgpart/xsldbginspector.cpp:107
msgid "Entities"
msgstr "實體"
#: kxsldbgpart/xsldbginspector.cpp:126
msgid "Apply changes to xsldbg after restarting execution"
msgstr "重新執行後套用變更到 xsldbg"
#: kxsldbgpart/xsldbginspector.cpp:133
msgid "&Refresh"
msgstr "刷新(&R)"
#: kxsldbgpart/xsldbginspector.cpp:134
msgid "Refresh values in inspectors from xsldbg"
msgstr "從 xsldbg 刷新檢查員中的值"
#: kxsldbgpart/xsldbglocallistitem.cpp:32
#: kxsldbgpart/xsldbglocalvariablesimpl.cpp:71
msgid "Local"
msgstr "本地端"
#: kxsldbgpart/xsldbglocallistitem.cpp:34
#: kxsldbgpart/xsldbglocalvariablesimpl.cpp:73
msgid "Global"
msgstr "全域"
#: kxsldbgpart/xsldbgoutputview.cpp:61
msgid "xsldbg Output"
msgstr "xsldbg 輸出"
#: kxsldbgpart/xsldbgoutputview.cpp:62
msgid ""
"\t\txsldbg output capture ready\n"
"\n"
msgstr ""
"\t\txsldbg 輸出拮取就緒\n"
"\n"
#: kxsldbgpart/xsldbgoutputview.cpp:76
msgid "Result of evaluation"
msgstr "計算結果"
#: kxsldbgpart/xsldbgoutputview.cpp:93
msgid "Request Failed "
msgstr "請求失敗"
#: main.cpp:9
msgid "A TDE KPart Application for xsldbg, an XSLT debugger"
msgstr "為 XSLT 除錯器 xsldbg 設計的 TDE KPart 應用程式"
#: main.cpp:14 xsldbgmain.cpp:97
msgid "XSL script to run"
msgstr "要執行的 XSL 文稿"
#: main.cpp:15 xsldbgmain.cpp:98
msgid "XML data to be transformed"
msgstr "要轉換的 XML 資料"
#: main.cpp:16
msgid "File to save results to"
msgstr "儲存結果的檔案"
#: main.cpp:22
msgid "KXSLDbg"
msgstr "KXSLDbg"
#: xsldbgmain.cpp:51
msgid "A TDE console application for xsldbg, an XSLT debugger"
msgstr "xsldbg 的 TDE 主控台應用程式XSLT 除錯器"
#: xsldbgmain.cpp:57
msgid "Start a shell"
msgstr "啟動 shell"
#: xsldbgmain.cpp:58
msgid "Path to change into before loading files"
msgstr "在載入檔案前要切換的路徑"
#: xsldbgmain.cpp:59
msgid "Add a parameter named <name> and value <value> to XSL environment"
msgstr "在 XSL 環境中新增名為 <name> 與值為 <value> 的參數"
#: xsldbgmain.cpp:60
msgid "Use ISO 639 language code specified; for example en_US"
msgstr "使用 ISO 639 語言代碼,例如 en_US"
#: xsldbgmain.cpp:60
msgid "Save to a given file. See output command documentation"
msgstr "儲存到指定檔案。請參考輸出指令說明"
#: xsldbgmain.cpp:61
msgid "Show the version of libxml and libxslt used"
msgstr "顯示 libxml 與 libxslt 使用的版本"
#: xsldbgmain.cpp:62
msgid "Show logs of what is happening"
msgstr "顯示事件紀錄"
#: xsldbgmain.cpp:63
msgid "Display the time used"
msgstr "顯示使用時間"
#: xsldbgmain.cpp:64
msgid "Run the transformation 20 times"
msgstr "執行廿次轉換"
#: xsldbgmain.cpp:66
msgid "Dump the tree of the result instead"
msgstr "改傾印結果樹"
#: xsldbgmain.cpp:68
msgid "Disable the DTD loading phase"
msgstr "關閉 DTD 載入工作階段"
#: xsldbgmain.cpp:69
msgid "Disable the output of the result"
msgstr "關閉結果輸出"
#: xsldbgmain.cpp:70
msgid "Increase the maximum depth"
msgstr "遞增最大深度"
#: xsldbgmain.cpp:73
msgid "The input document is(are) an HTML file(s)"
msgstr "輸入的文件是 HTML 檔"
#: xsldbgmain.cpp:77
msgid "The input document is SGML docbook"
msgstr "輸入的文件是 SGML docbook 檔"
#: xsldbgmain.cpp:80
msgid "Disable the fetching DTDs or entities over network"
msgstr "關閉從網路上抓取 DTD 或實體的功能"
#: xsldbgmain.cpp:83
msgid "Use the catalogs from $SGML_CATALOG_FILES"
msgstr "使用 $SGML_CATALOG_FILES 的目錄"
#: xsldbgmain.cpp:87
msgid "Disable XInclude processing on document input"
msgstr "文件輸入時關閉 XInclude 處理"
#: xsldbgmain.cpp:90
msgid "Print profiling informations"
msgstr "列印設定檔資訊"
#: xsldbgmain.cpp:91
msgid "Do not run gdb compatability mode and print less information"
msgstr "不要以 gdb 相容模式執行,並印出較少資訊"
#: xsldbgmain.cpp:92
msgid "Detect and use encodings in the stylesheet"
msgstr "偵測與使用樣式表中的編碼"
#: xsldbgmain.cpp:93
msgid "Treat command line input as encoded in UTF-8"
msgstr "命令列輸入一律當成 UTF-8 編碼"
#: xsldbgmain.cpp:94
msgid "Use HTML output when generating search reports"
msgstr "產生搜尋報告時使用 HTML 輸出"
#: xsldbgmain.cpp:95
msgid ""
"Print all error messages to stdout, normally error messages go to stderr"
msgstr ""
"將所有的錯誤列印到標準輸出stdout。通常錯誤訊息都是丟到標準錯誤stderr"
#: xsldbgmain.cpp:96
msgid ""
"Disable the automatic restarting of execution when current processing pass "
"is complete"
msgstr "目前行程階段完成後關閉自動重新執行功能"
#: xsldbgmain.cpp:124
msgid "Using libxml %1, libxslt %2 and libexslt %3\n"
msgstr "使用 libxml %1, libxslt %2 與 libexslt %3\n"
#: xsldbgmain.cpp:125
msgid "xsldbg was compiled against libxml %1, libxslt %2 and libexslt %3\n"
msgstr "xsldbg 編譯時使用了 libxml %1libxslt %2 與 libexslt %3\n"
#: xsldbgmain.cpp:126
msgid "libxslt %1 was compiled against libxml %2\n"
msgstr "libxslt %1 編譯時使用了 libxml %2\n"
#: xsldbgmain.cpp:127
msgid "libexslt %1 was compiled against libxml %2\n"
msgstr "libexslt %1 編譯時使用了 libxml %2\n"
#: xsldbgmain.cpp:130
msgid "Xsldbg"
msgstr "Xsldbg"
#: kxsldbg_shell.rc:9 kxsldbgpart/kxsldbg_part.rc:4
#, no-c-format
msgid "Debug"
msgstr "除錯"
#: kxsldbgpart/xsldbgbreakpoints.ui:17
#, no-c-format
msgid "Xsldbg Breakpoints"
msgstr "Xsldbg 中斷點"
#: kxsldbgpart/xsldbgbreakpoints.ui:26
#, no-c-format
msgid "ID"
msgstr "代碼"
#: kxsldbgpart/xsldbgbreakpoints.ui:37 kxsldbgpart/xsldbgglobalvariables.ui:40
#: kxsldbgpart/xsldbglocalvariables.ui:150 kxsldbgpart/xsldbgtemplates.ui:32
#, no-c-format
msgid "Name"
msgstr "名稱"
#: kxsldbgpart/xsldbgbreakpoints.ui:48 kxsldbgpart/xsldbgtemplates.ui:43
#, no-c-format
msgid "Mode"
msgstr "模式"
#: kxsldbgpart/xsldbgbreakpoints.ui:59
#, no-c-format
msgid "File Name"
msgstr "檔案名稱"
#: kxsldbgpart/xsldbgbreakpoints.ui:70 kxsldbgpart/xsldbgcallstack.ui:54
#: kxsldbgpart/xsldbgtemplates.ui:65
#, no-c-format
msgid "Line Number"
msgstr "行號"
#: kxsldbgpart/xsldbgbreakpoints.ui:102
#, no-c-format
msgid "Click breakpoint in list to modify or delete it"
msgstr "點選清單中的中斷點可以修改或刪除"
#: kxsldbgpart/xsldbgbreakpoints.ui:138
#, no-c-format
msgid "ID:"
msgstr "代碼:"
#: kxsldbgpart/xsldbgbreakpoints.ui:146
#, no-c-format
msgid "Line number:"
msgstr "行號:"
#: kxsldbgpart/xsldbgbreakpoints.ui:154
#, no-c-format
msgid "You don't need to specify directory for file name"
msgstr "您不需要為檔名指定目錄。"
#: kxsldbgpart/xsldbgbreakpoints.ui:162
#, no-c-format
msgid "Template name or match name to look for"
msgstr "要搜尋的樣本名稱或比對名稱"
#: kxsldbgpart/xsldbgbreakpoints.ui:198 kxsldbgpart/xsldbgbreakpoints.ui:253
#, no-c-format
msgid "Must be positive"
msgstr "必須是正數"
#: kxsldbgpart/xsldbgbreakpoints.ui:285
#, no-c-format
msgid "Mode:"
msgstr "模式:"
#: kxsldbgpart/xsldbgbreakpoints.ui:293
#, no-c-format
msgid "Name:"
msgstr "名稱:"
#: kxsldbgpart/xsldbgbreakpoints.ui:301
#, no-c-format
msgid "File name:"
msgstr "檔案名稱:"
#: kxsldbgpart/xsldbgbreakpoints.ui:375
#, no-c-format
msgid "Delete breakpoint using ID"
msgstr "使用代碼刪除中斷點"
#: kxsldbgpart/xsldbgbreakpoints.ui:386
#, no-c-format
msgid "Clear entered text"
msgstr "清除輸入的文字"
#: kxsldbgpart/xsldbgbreakpoints.ui:394
#, no-c-format
msgid "Add All"
msgstr "全部新增"
#: kxsldbgpart/xsldbgbreakpoints.ui:397
#, no-c-format
msgid "Add breakpoint on all templates found"
msgstr "在全部找到的樣本中新增中斷點"
#: kxsldbgpart/xsldbgbreakpoints.ui:408
#, no-c-format
msgid "Delete all breakpoints"
msgstr "刪除所有的中斷點"
#: kxsldbgpart/xsldbgbreakpoints.ui:416
#, no-c-format
msgid "Enable"
msgstr "開啟"
#: kxsldbgpart/xsldbgbreakpoints.ui:419
#, no-c-format
msgid "Enable breakpoint using ID"
msgstr "使用代碼開啟中斷點"
#: kxsldbgpart/xsldbgbreakpoints.ui:430
#, no-c-format
msgid "Add breakpoint using file name with line number or a template name"
msgstr "使用檔名與行號或是樣本名稱新增中斷點"
#: kxsldbgpart/xsldbgbreakpoints.ui:488 kxsldbgpart/xsldbgcallstack.ui:114
#: kxsldbgpart/xsldbgentities.ui:125 kxsldbgpart/xsldbgglobalvariables.ui:229
#: kxsldbgpart/xsldbglocalvariables.ui:324 kxsldbgpart/xsldbgsources.ui:111
#, no-c-format
msgid "Refresh"
msgstr "刷新"
#: kxsldbgpart/xsldbgcallstack.ui:17
#, no-c-format
msgid "Xsldbg Callstack"
msgstr "Xsldbg 呼叫堆疊"
#: kxsldbgpart/xsldbgcallstack.ui:32
#, no-c-format
msgid "Frame# Template Name"
msgstr "框架# 樣本 名稱"
#: kxsldbgpart/xsldbgcallstack.ui:43 kxsldbgpart/xsldbgtemplates.ui:54
#, no-c-format
msgid "Source File Name"
msgstr "源碼檔案名稱"
#: kxsldbgpart/xsldbgcallstack.ui:75
#, no-c-format
msgid "Oldest Frame # is 0, Frame # has been added to the first column"
msgstr "最舊的框架編號為 0框架編號已新增到第一個欄位"
#: kxsldbgpart/xsldbgconfig.ui:31
#, no-c-format
msgid "KXsldbg Configuration"
msgstr "KXsldbg 設定"
#: kxsldbgpart/xsldbgconfig.ui:75
#, no-c-format
msgid "LibXSLT Parameters"
msgstr "LibXSLT 參數"
#: kxsldbgpart/xsldbgconfig.ui:108
#, no-c-format
msgid "Parameter value:"
msgstr "參數值:"
#: kxsldbgpart/xsldbgconfig.ui:148
#, no-c-format
msgid "Parameter name:"
msgstr "參數名稱:"
#: kxsldbgpart/xsldbgconfig.ui:229
#, no-c-format
msgid "Prev"
msgstr "前一個"
#: kxsldbgpart/xsldbgconfig.ui:464
#, no-c-format
msgid "Output file:"
msgstr "輸出檔案:"
#: kxsldbgpart/xsldbgconfig.ui:488 kxsldbgpart/xsldbgconfig.ui:536
#: kxsldbgpart/xsldbgconfig.ui:584
#, no-c-format
msgid "..."
msgstr "..."
#: kxsldbgpart/xsldbgconfig.ui:512
#, no-c-format
msgid "XML data:"
msgstr "XML 資料:"
#: kxsldbgpart/xsldbgconfig.ui:560
#, no-c-format
msgid "XSL source:"
msgstr "XSL 源碼:"
#: kxsldbgpart/xsldbgconfig.ui:621
#, no-c-format
msgid "catalogs"
msgstr "目錄"
#: kxsldbgpart/xsldbgconfig.ui:624
#, no-c-format
msgid "use catalogs from $SGML_CATALOGS_FILES"
msgstr "使用 $SGML_CATALOGS_FILES 中的目錄"
#: kxsldbgpart/xsldbgconfig.ui:632
#, no-c-format
msgid "novalid"
msgstr "novalid"
#: kxsldbgpart/xsldbgconfig.ui:635
#, no-c-format
msgid "skip the DTD loading phase"
msgstr "忽略 DTD 載入階段"
#: kxsldbgpart/xsldbgconfig.ui:643
#, no-c-format
msgid "html"
msgstr "html"
#: kxsldbgpart/xsldbgconfig.ui:646
#, no-c-format
msgid "the input document is(are) an HTML file(s)"
msgstr "輸入的文件為 HTML 檔"
#: kxsldbgpart/xsldbgconfig.ui:654
#, no-c-format
msgid "docbook"
msgstr "docbook"
#: kxsldbgpart/xsldbgconfig.ui:657
#, no-c-format
msgid "the input document is SGML docbook"
msgstr "輸入的文件為 SGML 檔"
#: kxsldbgpart/xsldbgconfig.ui:665
#, no-c-format
msgid "debug"
msgstr "debug"
#: kxsldbgpart/xsldbgconfig.ui:668
#, no-c-format
msgid "dump the tree of the result instead"
msgstr "改為傾印結果樹"
#: kxsldbgpart/xsldbgconfig.ui:676
#, no-c-format
msgid "noout"
msgstr "noout"
#: kxsldbgpart/xsldbgconfig.ui:679
#, no-c-format
msgid "do not dump the result"
msgstr "不要傾印結果"
#: kxsldbgpart/xsldbgconfig.ui:687
#, no-c-format
msgid "profile"
msgstr "profile"
#: kxsldbgpart/xsldbgconfig.ui:690
#, no-c-format
msgid "print profiling information"
msgstr "列印設定檔資訊"
#: kxsldbgpart/xsldbgconfig.ui:698
#, no-c-format
msgid "timing"
msgstr "timing"
#: kxsldbgpart/xsldbgconfig.ui:701
#, no-c-format
msgid "display the time used"
msgstr "顯示使用的時間"
#: kxsldbgpart/xsldbgconfig.ui:709
#, no-c-format
msgid "nonet"
msgstr "nonet"
#: kxsldbgpart/xsldbgconfig.ui:712
#, no-c-format
msgid "refuse to fetch DTDs or entities over network"
msgstr "拒絕從網路上抓取 DTDs 或實體"
#: kxsldbgpart/xsldbgentities.ui:25
#, no-c-format
msgid "Xsldbg Entities"
msgstr "Xsldbg 實體"
#: kxsldbgpart/xsldbgentities.ui:40
#, no-c-format
msgid "PublicID"
msgstr "公開代碼"
#: kxsldbgpart/xsldbgentities.ui:51
#, no-c-format
msgid "SystemID"
msgstr "系統代碼"
#: kxsldbgpart/xsldbgglobalvariables.ui:25
#, no-c-format
msgid "Xsldbg Global Variables"
msgstr "Xsldbg 全域變數"
#: kxsldbgpart/xsldbgglobalvariables.ui:51
#: kxsldbgpart/xsldbglocalvariables.ui:183 kxsldbgpart/xsldbgsources.ui:32
#, no-c-format
msgid "Source File"
msgstr "源碼檔案"
#: kxsldbgpart/xsldbgglobalvariables.ui:62
#: kxsldbgpart/xsldbglocalvariables.ui:194
#, no-c-format
msgid "Source Line Number"
msgstr "源碼行號"
#: kxsldbgpart/xsldbgglobalvariables.ui:150
#: kxsldbgpart/xsldbglocalvariables.ui:87
#, no-c-format
msgid "Expression:"
msgstr "表示式:"
#: kxsldbgpart/xsldbgglobalvariables.ui:158
#: kxsldbgpart/xsldbglocalvariables.ui:95
#, no-c-format
msgid "Enter a valid XPath expression"
msgstr "請輸入合法的 XPath 表示式"
#: kxsldbgpart/xsldbgglobalvariables.ui:188
#: kxsldbgpart/xsldbglocalvariables.ui:125
#, no-c-format
msgid "Result of evaluation will appear in message window"
msgstr "計算結果會出現在訊息視窗中"
#: kxsldbgpart/xsldbglocalvariables.ui:25
#, no-c-format
msgid "Xsldbg Local Variables"
msgstr "Xsldbg 本地端變數"
#: kxsldbgpart/xsldbglocalvariables.ui:161
#, no-c-format
msgid "Template Context"
msgstr "樣本內容"
#: kxsldbgpart/xsldbglocalvariables.ui:172
#, no-c-format
msgid "Type"
msgstr "型態"
#: kxsldbgpart/xsldbglocalvariables.ui:228
#, no-c-format
msgid "Variable expression:"
msgstr "變數表示式:"
#: kxsldbgpart/xsldbglocalvariables.ui:249
#, no-c-format
msgid "Variable type:"
msgstr "變數型態:"
#: kxsldbgpart/xsldbglocalvariables.ui:270
#, no-c-format
msgid "Set Expression"
msgstr "設定表示式"
#: kxsldbgpart/xsldbglocalvariables.ui:273
#, no-c-format
msgid "Set the selection for variable "
msgstr "設定選取的變數"
#: kxsldbgpart/xsldbglocalvariables.ui:283
#, no-c-format
msgid "Variable name:"
msgstr "變數名稱:"
#: kxsldbgpart/xsldbgmsgdialog.ui:26
#, no-c-format
msgid "qxsldbg Message"
msgstr "qxsldbg 訊息"
#: kxsldbgpart/xsldbgmsgdialog.ui:71
#, no-c-format
msgid "TextLabel1"
msgstr "TextLabel1"
#: kxsldbgpart/xsldbgsources.ui:17
#, no-c-format
msgid "Xsldbg Source Files"
msgstr "Xsldbg 源碼檔案"
#: kxsldbgpart/xsldbgsources.ui:43
#, no-c-format
msgid "Parent File"
msgstr "父母檔案"
#: kxsldbgpart/xsldbgsources.ui:54
#, no-c-format
msgid "Parent Line Number"
msgstr "父母行號"
#: kxsldbgpart/xsldbgtemplates.ui:17
#, no-c-format
msgid "Xsldbg Templates"
msgstr "Xsldbg 樣本"
#: kxsldbgpart/xsldbgwalkspeed.ui:17
#, no-c-format
msgid "Configure xsldbg's Walk Speed"
msgstr "設定 xsldbg 執行速度"
#: kxsldbgpart/xsldbgwalkspeed.ui:51
#, no-c-format
msgid ""
"Change the speed at which xsldbg walks through execution of the stylesheet."
msgstr "改變 xsldbg 「走過」樣式表時的執行速度"
#: kxsldbgpart/xsldbgwalkspeed.ui:95
#, no-c-format
msgid "Slow"
msgstr "慢"
#: kxsldbgpart/xsldbgwalkspeed.ui:117
#, no-c-format
msgid "Fast"
msgstr "快"
#~ msgid "Warning: The %1 command is disbled\n"
#~ msgstr "警告:命令 %1 已關閉。\n"