You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tde-i18n/tde-i18n-uz@cyrillic/messages/tdelibs/tdeprint.po

5546 lines
190 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# translation of tdeprint.po to Uzbek
# translation of tdeprint.po to
# Copyright (C) 2003, 2004, 2005, 2006, 2008 Free Software Foundation, Inc.
#
# Mashrab Kuvatov <kmashrab@uni-bremen.de>, 2003, 2004, 2005, 2006, 2008.
msgid ""
msgstr ""
"Project-Id-Version: tdeprint\n"
"POT-Creation-Date: 2023-03-05 18:13+0000\n"
"PO-Revision-Date: 2008-04-13 00:27+0200\n"
"Last-Translator: Mashrab Kuvatov <kmashrab@uni-bremen.de>\n"
"Language-Team: Uzbek <floss-uz-l10n@googlegroups.com>\n"
"Language: uz\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"
#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr ""
#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr ""
#: cups/cupsaddsmb2.cpp:56 cups/cupsaddsmb2.cpp:364
msgid "&Export"
msgstr "&Экспорт қилиш"
#: cups/cupsaddsmb2.cpp:62
msgid "Export Printer Driver to Windows Clients"
msgstr "Принтернинг драйверларини Windows клиентларга экспорт қилиш"
#: cups/cupsaddsmb2.cpp:73
msgid "&Username:"
msgstr "Ф&ойдаланувчи:"
#: cups/cupsaddsmb2.cpp:74
msgid "&Samba server:"
msgstr "&Samba сервери:"
#: cups/cupsaddsmb2.cpp:75 management/kmwpassword.cpp:50
msgid "&Password:"
msgstr "&Махфий сўз:"
#: cups/cupsaddsmb2.cpp:80
msgid ""
"<p><b>Samba server</b></p>Adobe Windows PostScript driver files plus the "
"CUPS printer PPD will be exported to the <tt>[print$]</tt> special share of "
"the Samba server (to change the source CUPS server, use the "
"<nobr><i>Configure Manager -> CUPS server</i></nobr> first). The <tt>[print"
"$]</tt> share must exist on the Samba side prior to clicking the <b>Export</"
"b> button below."
msgstr ""
#: cups/cupsaddsmb2.cpp:89
msgid ""
"<p><b>Samba username</b></p>User needs to have write access to the <tt>[print"
"$]</tt> share on the Samba server. <tt>[print$]</tt> holds printer drivers "
"prepared for download to Windows clients. This dialog does not work for "
"Samba servers configured with <tt>security = share</tt> (but works fine with "
"<tt>security = user</tt>)."
msgstr ""
#: cups/cupsaddsmb2.cpp:97
msgid ""
"<p><b>Samba password</b></p>The Samba setting <tt>encrypt passwords = yes</"
"tt> (default) requires prior use of <tt>smbpasswd -a [username]</tt> "
"command, to create an encrypted Samba password and have Samba recognize it."
msgstr ""
#: cups/cupsaddsmb2.cpp:268
#, c-format
msgid "Creating folder %1"
msgstr "%1 жилди яратилмоқда"
#: cups/cupsaddsmb2.cpp:276
#, c-format
msgid "Uploading %1"
msgstr "%1 ёзиб қўилмоқда"
#: cups/cupsaddsmb2.cpp:284
#, c-format
msgid "Installing driver for %1"
msgstr "%1 учун драйвер ўрнатилмоқда"
#: cups/cupsaddsmb2.cpp:292
#, c-format
msgid "Installing printer %1"
msgstr "Принтер %1 ўрнатилмоқда"
#: cups/cupsaddsmb2.cpp:334
msgid "Driver successfully exported."
msgstr "Драйвер муваффақиятли экспорт қилинди."
#: cups/cupsaddsmb2.cpp:344
msgid ""
"Operation failed. Possible reasons are: permission denied or invalid Samba "
"configuration (see <a href=\"man:/cupsaddsmb\">cupsaddsmb</a> manual page "
"for detailed information, you need <a href=\"http://www.cups.org\">CUPS</a> "
"version 1.1.11 or higher). You may want to try again with another login/"
"password."
msgstr ""
#: cups/cupsaddsmb2.cpp:353
msgid "Operation aborted (process killed)."
msgstr "Амал тўхтатилди (жараён ўлдирилди)."
#: cups/cupsaddsmb2.cpp:359
msgid "<h3>Operation failed.</h3><p>%1</p>"
msgstr "<h3>Амал муваффақиятсиз тугади.</h3><p>%1</p>"
#: cups/cupsaddsmb2.cpp:374
msgid ""
"You are about to prepare the <b>%1</b> driver to be shared out to Windows "
"clients through Samba. This operation requires the <a href=\"http://www."
"adobe.com/products/printerdrivers/main.html\">Adobe PostScript Driver</a>, a "
"recent version of Samba 2.2.x and a running SMB service on the target "
"server. Click <b>Export</b> to start the operation. Read the <a href=\"man:/"
"cupsaddsmb\">cupsaddsmb</a> manual page in Konqueror or type <tt>man "
"cupsaddsmb</tt> in a console window to learn more about this functionality."
msgstr ""
#: cups/cupsaddsmb2.cpp:394
msgid ""
"Some driver files are missing. You can get them on <a href=\"http://www."
"adobe.com\">Adobe</a> web site. See <a href=\"man:/cupsaddsmb\">cupsaddsmb</"
"a> manual page for more details (you need <a href=\"http://www.cups.org"
"\">CUPS</a> version 1.1.11 or higher)."
msgstr ""
#: cups/cupsaddsmb2.cpp:405
#, c-format
msgid "Preparing to upload driver to host %1"
msgstr "%1 компьютерига драйверни ёзиб қўишга таёрланмоқда"
#: cups/cupsaddsmb2.cpp:410 management/networkscanner.cpp:149
msgid "&Abort"
msgstr "&Тўхтатиш"
#: cups/cupsaddsmb2.cpp:416
msgid "The driver for printer <b>%1</b> could not be found."
msgstr "Принтер <b>%1</b> учун драйвер топилмади."
#: cups/cupsaddsmb2.cpp:456
#, c-format
msgid "Preparing to install driver on host %1"
msgstr "Драйверларни компьютерда (%1) ўрнатиш тайёрланмоқда"
#: cups/ippreportdlg.cpp:34
msgid "IPP Report"
msgstr "IPP ҳисоботи"
#: cups/ippreportdlg.cpp:34 cups/ippreportdlg.cpp:41 kprintdialog.cpp:307
msgid "&Print"
msgstr "&Босиб чиқариш"
#: cups/ippreportdlg.cpp:93
msgid "Internal error: unable to generate HTML report."
msgstr "Ички хато: HTML ҳисоботини яратиб бўлмади."
#: cups/ipprequest.cpp:164
msgid "You don't have access to the requested resource."
msgstr ""
#: cups/ipprequest.cpp:167
msgid "You are not authorized to access the requested resource."
msgstr ""
#: cups/ipprequest.cpp:170
msgid "The requested operation cannot be completed."
msgstr ""
#: cups/ipprequest.cpp:173
msgid "The requested service is currently unavailable."
msgstr ""
#: cups/ipprequest.cpp:176
msgid "The target printer is not accepting print jobs."
msgstr "Принтер вазифаларни қабул қилмаяпти."
#: cups/ipprequest.cpp:313
msgid ""
"Connection to CUPS server failed. Check that the CUPS server is correctly "
"installed and running."
msgstr ""
"CUPS серверига уланиш муваффақиятсиз тугади. CUPS сервери тўғри "
"ўрнатилганлигини ва ишга туширилганлигини текширинг."
#: cups/ipprequest.cpp:316
msgid "The IPP request failed for an unknown reason."
msgstr "IPP талаб номаълум сабабга кўра муваффақиятсиз тугади."
#: cups/ipprequest.cpp:461
msgid "Attribute"
msgstr "Атрибут"
#: cups/ipprequest.cpp:462
msgid "Values"
msgstr "Қийматлари"
#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567
msgid "True"
msgstr "Рост"
#: cups/ipprequest.cpp:500 cups/ipprequest.cpp:567
msgid "False"
msgstr "Ёлғон"
#: cups/kmconfigcups.cpp:32
msgid "CUPS Server"
msgstr "CUPS сервери"
#: cups/kmconfigcups.cpp:33
msgid "CUPS Server Settings"
msgstr "CUPS серверининг мосламалари"
#: cups/kmconfigcupsdir.cpp:34
msgid "Folder"
msgstr "Жилд"
#: cups/kmconfigcupsdir.cpp:35
msgid "CUPS Folder Settings"
msgstr "CUPS жилдининг мосламалари"
#: cups/kmconfigcupsdir.cpp:38
msgid "Installation Folder"
msgstr "Ўрнатиш жилди"
#: cups/kmconfigcupsdir.cpp:41
msgid "Standard installation (/)"
msgstr "Андоза ўрнатиш (/)"
#: cups/kmcupsconfigwidget.cpp:65
msgid "Server Information"
msgstr "Сервер ҳақида маълумот"
#: cups/kmcupsconfigwidget.cpp:66
msgid "Account Information"
msgstr "Ҳисоб ҳақида маълумот"
#: cups/kmcupsconfigwidget.cpp:67 rlpr/kmproxywidget.cpp:34
msgid "&Host:"
msgstr "К&омпьютернинг номи:"
#: cups/kmcupsconfigwidget.cpp:68 management/kmwsocketutil.cpp:53
#: management/networkscanner.cpp:339 rlpr/kmproxywidget.cpp:35
msgid "&Port:"
msgstr "&Порт:"
#: cups/kmcupsconfigwidget.cpp:75
msgid "&User:"
msgstr "&Фойдаланувчи:"
#: cups/kmcupsconfigwidget.cpp:76
msgid "Pass&word:"
msgstr "&Махфий сўз:"
#: cups/kmcupsconfigwidget.cpp:79
msgid "&Store password in configuration file"
msgstr "Махфий сўзни мослама файлида &сақлаш"
#: cups/kmcupsconfigwidget.cpp:81
msgid "Use &anonymous access"
msgstr ""
#: cups/kmcupsjobmanager.cpp:349
msgid "Job Report"
msgstr "Вазифа ҳақида ҳисобот"
#: cups/kmcupsjobmanager.cpp:351 cups/kmcupsjobmanager.cpp:456
msgid "Unable to retrieve job information: "
msgstr "Вазифа ҳақида маълумотни аниқлаб бўлмади: "
#: cups/kmcupsjobmanager.cpp:360
msgid "&Job IPP Report"
msgstr "&Вазифанинг IPP ҳисоботи"
#: cups/kmcupsjobmanager.cpp:362
msgid "&Increase Priority"
msgstr "Муҳимлик даражасини &ошириш"
#: cups/kmcupsjobmanager.cpp:364
msgid "&Decrease Priority"
msgstr "Муҳимлик даражасини &камайтириш"
#: cups/kmcupsjobmanager.cpp:366
msgid "&Edit Attributes..."
msgstr "Атрибутларни &таҳрирлаш"
#: cups/kmcupsjobmanager.cpp:419
msgid "Unable to change job priority: "
msgstr "Вазифанинг муҳимлик даражасини ўзгартириб бўлмади: "
#: cups/kmcupsjobmanager.cpp:477
#, c-format
msgid "Unable to find printer %1."
msgstr "Принтер (%1) топилмади."
#: cups/kmcupsjobmanager.cpp:494
msgid "Attributes of Job %1@%2 (%3)"
msgstr "%1@%2 (%3) вазифанинг атрибутлари"
#: cups/kmcupsjobmanager.cpp:516
msgid "Unable to set job attributes: "
msgstr "Вазифанинг атрибутларини ўзгартириб бўлмади: "
#: cups/kmcupsmanager.cpp:651 lpr/matichandler.cpp:254 lpr/matichandler.cpp:358
msgid ""
"Unable to find the executable foomatic-datafile in your PATH. Check that "
"Foomatic is correctly installed."
msgstr ""
"Сизнинг $PATH муҳит ўзгарувчингизда кўрсатилган директорияларда foomatic-"
"datafile дастури топилмади. Foomatic тўғри ўрнатилганлигини текширинг."
#: cups/kmcupsmanager.cpp:683 lpr/matichandler.cpp:286 lpr/matichandler.cpp:405
msgid ""
"Unable to create the Foomatic driver [%1,%2]. Either that driver does not "
"exist, or you don't have the required permissions to perform that operation."
msgstr ""
"Foomatic драйверини [%1,%2] яратиб бўлмади. Ёки у драйвер мавжуд эмас ёки бу "
"амални бажариш учун сизда етарли ҳуқуқлар йўқ."
#: cups/kmcupsmanager.cpp:840
msgid "Library cupsdconf not found. Check your installation."
msgstr "Cupsdconf кутубхонаси топилмади. У тўғри ўрнатилганлигини текширинг."
#: cups/kmcupsmanager.cpp:846
msgid "Symbol %1 not found in cupsdconf library."
msgstr "%1 белгиси cupsdconf кутубхонасида топилмади."
#: cups/kmcupsmanager.cpp:941
msgid "&Export Driver..."
msgstr "Драйверни &экспорт қилиш"
#: cups/kmcupsmanager.cpp:943
msgid "&Printer IPP Report"
msgstr "&Принтернинг IPP ҳисоботи"
#: cups/kmcupsmanager.cpp:994 cups/kmwippprinter.cpp:218
#, c-format
msgid "IPP Report for %1"
msgstr "%1 учун IPP ҳисоботи"
#: cups/kmcupsmanager.cpp:998
msgid "Unable to retrieve printer information. Error received:"
msgstr "Принтер ҳақида маълумотни аниқлаб бўлмади. Олинган хабар:"
#: cups/kmcupsmanager.cpp:1011
msgid "Server"
msgstr "Сервер"
#: cups/kmcupsmanager.cpp:1051
#, c-format
msgid ""
"Connection to CUPS server failed. Check that the CUPS server is correctly "
"installed and running. Error: %1."
msgstr ""
"CUPS серверига уланиш муваффақиятсиз тугади. CUPS сервери тўғри "
"ўрнатилганлигини ва ишга туширилганлигини текширинг. Хато: %1."
#: cups/kmcupsmanager.cpp:1052
msgid "the IPP request failed for an unknown reason"
msgstr "IPP талаб номаълум сабабга кўра муваффақиятсиз тугади"
#: cups/kmcupsmanager.cpp:1086
msgid "connection refused"
msgstr "алоқа рад этилди"
#: cups/kmcupsmanager.cpp:1089
msgid "host not found"
msgstr "хост топилмади"
#: cups/kmcupsmanager.cpp:1093
msgid "read failed (%1)"
msgstr ""
#: cups/kmcupsmanager.cpp:1097
msgid ""
"Connection to CUPS server failed. Check that the CUPS server is correctly "
"installed and running. Error: %2: %1."
msgstr ""
"CUPS серверига уланиш муваффақиятсиз тугади. CUPS сервери тўғри "
"ўрнатилганлигини ва ишга туширилганлигини текширинг. Хато: %2: %1."
#: cups/kmcupsuimanager.cpp:87
msgid ""
"<qt><p>Print queue on remote CUPS server</p><p>Use this for a print queue "
"installed on a remote machine running a CUPS server. This allows to use "
"remote printers when CUPS browsing is turned off.</p></qt>"
msgstr ""
#: cups/kmcupsuimanager.cpp:94
msgid ""
"<qt><p>Network IPP printer</p><p>Use this for a network-enabled printer "
"using the IPP protocol. Modern high-end printers can use this mode. Use this "
"mode instead of TCP if your printer can do both.</p></qt>"
msgstr ""
#: cups/kmcupsuimanager.cpp:101
msgid ""
"<qt><p>Fax/Modem printer</p><p>Use this for a fax/modem printer. This "
"requires the installation of the <a href=\"http://vigna.dsi.unimi.it/"
"fax4CUPS/\">fax4CUPS</a> backend. Documents sent on this printer will be "
"faxed to the given target fax number.</p></qt>"
msgstr ""
#: cups/kmcupsuimanager.cpp:108
msgid ""
"<qt><p>Other printer</p><p>Use this for any printer type. To use this "
"option, you must know the URI of the printer you want to install. Refer to "
"the CUPS documentation for more information about the printer URI. This "
"option is mainly useful for printer types using 3rd party backends not "
"covered by the other possibilities.</p></qt>"
msgstr ""
#: cups/kmcupsuimanager.cpp:116
msgid ""
"<qt><p>Class of printers</p><p>Use this to create a class of printers. When "
"sending a document to a class, the document is actually sent to the first "
"available (idle) printer in the class. Refer to the CUPS documentation for "
"more information about class of printers.</p></qt>"
msgstr ""
#: cups/kmcupsuimanager.cpp:129
msgid "Re&mote CUPS server (IPP/HTTP)"
msgstr "Ма&софадаги CUPS сервери (IPP/HTTP)"
#: cups/kmcupsuimanager.cpp:130
msgid "Network printer w/&IPP (IPP/HTTP)"
msgstr ""
#: cups/kmcupsuimanager.cpp:131
msgid "S&erial Fax/Modem printer"
msgstr "&Кетма-кет Факс/Модем принтери"
#: cups/kmcupsuimanager.cpp:132
msgid "Other &printer type"
msgstr "Принтернинг &бошқа тури"
#: cups/kmcupsuimanager.cpp:134
msgid "Cl&ass of printers"
msgstr "Принтерлар &синфи"
#: cups/kmcupsuimanager.cpp:190
msgid "An error occurred while retrieving the list of available backends:"
msgstr "Бэкендлар рўйхатини аниқлашда хато рўй берди:"
#: cups/kmcupsuimanager.cpp:236
msgid "Priority"
msgstr "Муҳимлик даражаси"
#: cups/kmcupsuimanager.cpp:238
msgid "Billing Information"
msgstr ""
#: cups/kmpropbanners.cpp:35 cups/kmwbanners.cpp:92
msgid "&Starting banner:"
msgstr ""
#: cups/kmpropbanners.cpp:36 cups/kmwbanners.cpp:93
msgid "&Ending banner:"
msgstr ""
#: cups/kmpropbanners.cpp:49 kpgeneralpage.cpp:298
msgid "Banners"
msgstr ""
#: cups/kmpropbanners.cpp:50
msgid "Banner Settings"
msgstr ""
#: cups/kmpropquota.cpp:39 cups/kmwquota.cpp:96
msgid "&Period:"
msgstr "&Вақт:"
#: cups/kmpropquota.cpp:40 cups/kmwquota.cpp:97
msgid "&Size limit (KB):"
msgstr "&Ҳажм чегараси (Кб):"
#: cups/kmpropquota.cpp:41 cups/kmwquota.cpp:98
msgid "&Page limit:"
msgstr "&Бет сони чегараси:"
#: cups/kmpropquota.cpp:57
msgid "Quotas"
msgstr "Квоталар"
#: cups/kmpropquota.cpp:58
msgid "Quota Settings"
msgstr "Квота мосламалари"
#: cups/kmpropquota.cpp:78 cups/kmwquota.cpp:84
msgid "No quota"
msgstr "Квотасиз"
#: cups/kmpropquota.cpp:79 cups/kmpropquota.cpp:80 cups/kmwquota.cpp:87
#: cups/kmwquota.cpp:90
msgid "None"
msgstr "Йўқ"
#: cups/kmpropusers.cpp:38 cups/kmwusers.cpp:39
msgid "Users"
msgstr "Фойдаланувчилар"
#: cups/kmpropusers.cpp:39 cups/kmwusers.cpp:36
msgid "Users Access Settings"
msgstr "Фойдаланувчилар мурожаат мосламалари"
#: cups/kmpropusers.cpp:55
msgid "Denied users"
msgstr "Рухсат этилмаган фойдаланувчилар"
#: cups/kmpropusers.cpp:62
msgid "Allowed users"
msgstr "Рухсат этилган фойдаланувчилар"
#: cups/kmpropusers.cpp:76
msgid "All users allowed"
msgstr "Ҳамма фойдаланувчиларга рухсат этилган"
#: cups/kmwbanners.cpp:57
msgid "No Banner"
msgstr ""
#: cups/kmwbanners.cpp:58
msgid "Classified"
msgstr "Таснифланган"
#: cups/kmwbanners.cpp:59
msgid "Confidential"
msgstr "Махфий"
#: cups/kmwbanners.cpp:60
msgid "Secret"
msgstr "Махфий"
#: cups/kmwbanners.cpp:61
msgid "Standard"
msgstr "Андоза"
#: cups/kmwbanners.cpp:62
msgid "Top Secret"
msgstr "Жуда махфий"
#: cups/kmwbanners.cpp:63
msgid "Unclassified"
msgstr "Таснифланмаган"
#: cups/kmwbanners.cpp:86
msgid "Banner Selection"
msgstr ""
#: cups/kmwbanners.cpp:99
msgid ""
"<p>Select the default banners associated with this printer. These banners "
"will be inserted before and/or after each print job sent to the printer. If "
"you don't want to use banners, select <b>No Banner</b>.</p>"
msgstr ""
#: cups/kmwfax.cpp:39
msgid "Fax Serial Device"
msgstr "Кетма-кет факснинг ускунаси"
#: cups/kmwfax.cpp:43
msgid "<p>Select the device which your serial Fax/Modem is connected to.</p>"
msgstr "<p>Кетма-кет Фахс/Модем уланган ускунани танланг.</p>"
#: cups/kmwfax.cpp:81
msgid "You must select a device."
msgstr "Ускунани танлашингиз шарт."
#: cups/kmwipp.cpp:35
msgid "Remote IPP server"
msgstr "Масофадаги IPP сервер"
#: cups/kmwipp.cpp:39
msgid ""
"<p>Enter the information concerning the remote IPP server owning the "
"targeted printer. This wizard will poll the server before continuing.</p>"
msgstr ""
#: cups/kmwipp.cpp:42 management/kmwlpd.cpp:46 rlpr/kmproprlpr.cpp:34
#: rlpr/kmwrlpr.cpp:62
msgid "Host:"
msgstr "Компьютернинг номи:"
#: cups/kmwipp.cpp:43
msgid "Port:"
msgstr "Порт:"
#: cups/kmwipp.cpp:52 management/kmwsmb.cpp:79
msgid "Empty server name."
msgstr "Сервернинг номи кўрсатилмаган."
#: cups/kmwipp.cpp:59
msgid "Incorrect port number."
msgstr "Портнинг рақами нотўғри."
#: cups/kmwipp.cpp:72
msgid "<nobr>Unable to connect to <b>%1</b> on port <b>%2</b> .</nobr>"
msgstr ""
"<nobr><b>%2</b> портидаги <b>%1</b> билан алоқа ўрнатиб бўлмади.</nobr>"
#: cups/kmwippprinter.cpp:45
msgid "IPP Printer Information"
msgstr "IPP принтери ҳақида маълумот"
#: cups/kmwippprinter.cpp:55
msgid "&Printer URI:"
msgstr "&Принтернинг URI'си:"
#: cups/kmwippprinter.cpp:64
msgid ""
"<p>Either enter the printer URI directly, or use the network scanning "
"facility.</p>"
msgstr ""
#: cups/kmwippprinter.cpp:65
msgid "&IPP Report"
msgstr "IPP ҳи&соботи"
#: cups/kmwippprinter.cpp:112
msgid "You must enter a printer URI."
msgstr "Принтернинг URI'ини киритишингиз шарт."
#: cups/kmwippprinter.cpp:119 management/kmwsocket.cpp:117
msgid "No printer found at this address/port."
msgstr "Кўрсатилган манзилда/портда принтер топилмади."
#: cups/kmwippprinter.cpp:139 management/kmwsocket.cpp:136
msgid ""
"_: Unknown host - 1 is the IP\n"
"<Unknown> (%1)"
msgstr "<Номаълум> (%1)"
#: cups/kmwippprinter.cpp:173
msgid "<b>Name</b>: %1<br>"
msgstr "<b>Номи</b>: %1<br>"
#: cups/kmwippprinter.cpp:174
msgid "<b>Location</b>: %1<br>"
msgstr "<b>Манзили</b>: %1<br>"
#: cups/kmwippprinter.cpp:175
msgid "<b>Description</b>: %1<br>"
msgstr "<b>Таърифи</b>: %1<br>"
#: cups/kmwippprinter.cpp:182
msgid "<b>Model</b>: %1<br>"
msgstr "<b>Модели</b>: %1<br>"
#: cups/kmwippprinter.cpp:187 kmprinter.cpp:139
msgid "Idle"
msgstr "Idle"
#: cups/kmwippprinter.cpp:188 kmprinter.cpp:141
msgid "Stopped"
msgstr "Тўхтатилган"
#: cups/kmwippprinter.cpp:189 kmjob.cpp:111 kmprinter.cpp:140
msgid "Processing..."
msgstr "Ишлаяпман..."
#: cups/kmwippprinter.cpp:190 kmjob.cpp:132 kmprinter.cpp:142
msgid ""
"_: Unknown State\n"
"Unknown"
msgstr "Номаълум"
#: cups/kmwippprinter.cpp:192
msgid "<b>State</b>: %1<br>"
msgstr "<b>Ҳолати</b>: %1<br>"
#: cups/kmwippprinter.cpp:199
#, c-format
msgid "Unable to retrieve printer info. Printer answered:<br><br>%1"
msgstr ""
"Принтер ҳақида маълумотни аниқлаб бўлмади. Принтердан олинган хабар:<br><br>"
"%1"
#: cups/kmwippprinter.cpp:222
msgid "Unable to generate report. IPP request failed with message: %1 (0x%2)."
msgstr ""
"Ҳисоботни яратиб бўлмади. IPP талаб қуйидаги хабар билан муваффақиятсиз "
"тугади: %1 (0x%2)."
#: cups/kmwippselect.cpp:38
msgid "Remote IPP Printer Selection"
msgstr "Масофадаги IPP принтерни танлаш"
#: cups/kmwippselect.cpp:51
msgid "You must select a printer."
msgstr "Принтерни танлашингиз шарт."
#: cups/kmwother.cpp:41
msgid "URI Selection"
msgstr "URI танлаш"
#: cups/kmwother.cpp:46
msgid ""
"<p>Enter the URI corresponding to the printer to be installed. Examples:</"
"p><ul><li>smb://[login[:passwd]@]server/printer</li><li>lpd://server/queue</"
"li><li>parallel:/dev/lp0</li></ul>"
msgstr ""
"<p>Ўрнатиш керак бўлган принтернинг URI'ини киритинг. Масалан:</"
"p><ul><li>smb://[фойдаланувчи[:махфий сўз]@]сервер/принтер</li><li>lpd://"
"сервер/навбат</li><li>parallel:/dev/lp0</li></ul>"
#: cups/kmwother.cpp:51 management/kminfopage.cpp:52
#: management/kmpropbackend.cpp:35 management/kmwlocal.cpp:54
msgid "URI:"
msgstr "URI:"
#: cups/kmwother.cpp:78
msgid "CUPS Server %1:%2"
msgstr "CUPS сервери %1:%2"
#: cups/kmwquota.cpp:46
msgid "second(s)"
msgstr "сония"
#: cups/kmwquota.cpp:47
msgid "minute(s)"
msgstr "дақиқа"
#: cups/kmwquota.cpp:48
msgid "hour(s)"
msgstr "соат"
#: cups/kmwquota.cpp:49
msgid "day(s)"
msgstr "кун"
#: cups/kmwquota.cpp:50
msgid "week(s)"
msgstr "ҳафта"
#: cups/kmwquota.cpp:51
msgid "month(s)"
msgstr "ой"
#: cups/kmwquota.cpp:79
msgid "Printer Quota Settings"
msgstr "Принтернинг квота мосламалари"
#: cups/kmwquota.cpp:104
msgid ""
"<p>Set here the quota for this printer. Using limits of <b>0</b> means that "
"no quota will be used. This is equivalent to set quota period to <b><nobr>No "
"quota</nobr></b> (-1). Quota limits are defined on a per-user base and "
"applied to all users.</p>"
msgstr ""
#: cups/kmwquota.cpp:130
msgid "You must specify at least one quota limit."
msgstr "Камида битта квота чегарасини кўрсатишингиз шарт."
#: cups/kmwusers.cpp:41
msgid "Allowed Users"
msgstr "Рухсат этилган фойдаланувчилар"
#: cups/kmwusers.cpp:42
msgid "Denied Users"
msgstr "Рухсат этилмаган фойдаланувчилар"
#: cups/kmwusers.cpp:44
msgid "Define here a group of allowed/denied users for this printer."
msgstr ""
"Бу ерда, принтер билан фойдаланиш ҳуқуқига эга бўлган/бўлмаган "
"фойдаланувчилар гуруҳини аниқланг."
#: cups/kmwusers.cpp:45 management/kxmlcommanddlg.cpp:117
msgid "&Type:"
msgstr "&Тури:"
#: cups/kphpgl2page.cpp:33
msgid ""
" <qt> <b>Print in Black Only (Blackplot)</b> <p>The 'blackplot' option "
"specifies that all pens should plot in black-only: The default is to use the "
"colors defined in the plot file, or the standard pen colors defined in the "
"HP-GL/2 reference manual from Hewlett Packard. </p> <br> <hr> "
"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> <pre> -o "
"blackplot=true </pre> </p> </qt>"
msgstr ""
#: cups/kphpgl2page.cpp:48
msgid ""
" <qt> <b>Scale Print Image to Page Size</b> <p>The 'fitplot' option "
"specifies that the HP-GL image should be scaled to fill exactly the page "
"with the (elsewhere selected) media size. </p> <p>The default is 'fitplot "
"is disabled'. The default will therefore use the absolute distances "
"specified in the plot file. (You should be aware that HP-GL files are very "
"often CAD drawings intended for large format plotters. On standard office "
"printers they will therefore lead to the drawing printout being spread "
"across multiple pages.) </p> <p><b>Note:</b>This feature depends upon an "
"accurate plot size (PS) command in the HP-GL/2 file. If no plot size is "
"given in the file the filter converting the HP-GL to PostScript assumes the "
"plot is ANSI E size. </p> <br> <hr> <p><em><b>Additional hint for power "
"users:</b> This TDEPrint GUI element matches with the CUPS commandline job "
"option parameter:</em> <pre> -o fitplot=true </pre> </p> </qt>"
msgstr ""
#: cups/kphpgl2page.cpp:68
msgid ""
" <qt> <b>Set Pen Width for HP-GL (if not defined in file)</b>. <p>The pen "
"width value can be set here in case the original HP-GL file does not have "
"it set. The pen width specifies the value in micrometers. The default value "
"of 1000 produces lines that are 1000 micrometers == 1 millimeter in width. "
"Specifying a pen width of 0 produces lines that are exactly 1 pixel wide. </"
"p> <p><b>Note:</b> The penwidth option set here is ignored if the pen "
"widths are set inside the plot file itself..</p> <br> <hr> "
"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> <pre> -o "
"penwidth=... # example: \"2000\" or \"500\" </pre> </p> </qt>"
msgstr ""
#: cups/kphpgl2page.cpp:85
msgid ""
" <qt> <b>HP-GL Print Options</b> <p>All options on this page are only "
"applicable if you use TDEPrint to send HP-GL and HP-GL/2 files to one of "
"your printers. </p> <p>HP-GL and HP-GL/2 are page description languages "
"developed by Hewlett-Packard to drive Pen Plotting devices. </p> "
"<p>TDEPrint can (with the help of CUPS) convert the HP-GL file format and "
"print it on any installed printer. </p> <p><b>Note 1:</b> To print HP-GL "
"files, start 'kprinter' and simply load the file into the running kprinter."
"</p> <p><b>Note 2:</b> The 'fitplot' parameter provided on this dialog does "
"also work for printing PDF files (if your CUPS version is more recent than "
"1.1.22).</p> <br> <hr> <p><em><b>Additional hint for power users:</b> "
"These TDEPrint GUI elements match with CUPS commandline job option "
"parameters:</em> <pre> -o blackplot=... # examples: \"true\" or \"false"
"\" <br> -o fitplot=... # examples: \"true\" or \"false\" <br> -"
"o penwidth=... # examples: \"true\" or \"false\" </pre> </p> </qt>"
msgstr ""
#: cups/kphpgl2page.cpp:113
msgid "HP-GL/2 Options"
msgstr "HP-GL/2 параметрлари"
#: cups/kphpgl2page.cpp:115
msgid "&Use only black pen"
msgstr "&Фақат қора рангни ишлатиш"
#: cups/kphpgl2page.cpp:118
msgid "&Fit plot to page"
msgstr "&Чизмани бетга мослаш"
#: cups/kphpgl2page.cpp:122
msgid "&Pen width:"
msgstr "&Бўёқ ўлчами:"
#: cups/kpimagepage.cpp:44
msgid ""
" <qt> <p><b>Brightness:</b> Slider to control the brightness value of all "
"colors used.</p> <p> The brightness value can range from 0 to 200. Values "
"greater than 100 will lighten the print. Values less than 100 will darken "
"the print. </p> <br> <hr> <p><em><b>Additional hint for power users:</b> "
"This TDEPrint GUI element matches with the CUPS commandline job option "
"parameter:</em> <pre> -o brightness=... # use range from \"0\" to "
"\"200\" </pre> </p> </qt>"
msgstr ""
#: cups/kpimagepage.cpp:58
msgid ""
" <qt> <p><b>Hue (Tint):</b> Slider to control the hue value for color "
"rotation.</p> <p> The hue value is a number from -360 to 360 and represents "
"the color hue rotation. The following table summarizes the change you will "
"see for the base colors: <center> <table border=\"1\" width=\"70%\"> "
"<tr><th><b>Original</b></th> <th><b>hue=-45</b></th> <th><b>hue=45</b></"
"th> </tr> <tr><td>Red</td> <td>Purple</td> <td>Yellow-"
"orange</td> </tr> <tr><td>Green</td> <td>Yellow-green</td> "
"<td>Blue-green</td> </tr> <tr><td>Yellow</td> <td>Orange</"
"td> <td>Green-yellow</td> </tr> <tr><td>Blue</td> "
"<td>Sky-blue</td> <td>Purple</td> </tr> <tr><td>Magenta</"
"td> <td>Indigo</td> <td>Crimson</td> </tr> "
"<tr><td>Cyan</td> <td>Blue-green</td> <td>Light-navy-blue</"
"td> </tr> </table> </center> <br> <hr> <p><em><b>Additional hint for "
"power users:</b> This TDEPrint GUI element matches with the CUPS "
"commandline job option parameter:</em> <pre> -o hue=... # use range "
"from \"-360\" to \"360\" </pre> </p> </qt>"
msgstr ""
#: cups/kpimagepage.cpp:83
msgid ""
" <qt> <p><b>Saturation:</b> Slider to control the saturation value for all "
"colors used.</p> <p> The saturation value adjusts the saturation of the "
"colors in an image, similar to the color knob on your television. The color "
"saturation value.can range from 0 to 200. On inkjet printers, a higher "
"saturation value uses more ink. On laserjet printers, a higher saturation "
"uses more toner. A color saturation of 0 produces a black-and-white print, "
"while a value of 200 will make the colors extremely intense. </p> <br> "
"<hr> <p><em><b>Additional hint for power users:</b> This TDEPrint GUI "
"element matches with the CUPS commandline job option parameter:</em> "
"<pre> -o saturation=... # use range from \"0\" to \"200\" </pre> </"
"p> </qt>"
msgstr ""
#: cups/kpimagepage.cpp:101
msgid ""
" <qt> <p><b>Gamma:</b> Slider to control the gamma value for color "
"correction.</p> <p> The gamma value can range from 1 to 3000. A gamma "
"values greater than 1000 lightens the print. A gamma value less than 1000 "
"darken the print. The default gamma is 1000. </p> <p><b>Note:</b></p> the "
"gamma value adjustment is not visible in the thumbnail preview. </p> <br> "
"<hr> <p><em><b>Additional hint for power users:</b> This TDEPrint GUI "
"element matches with the CUPS commandline job option parameter:</em> "
"<pre> -o gamma=... # use range from \"1\" to \"3000\" </pre> </p> "
"</qt>"
msgstr ""
#: cups/kpimagepage.cpp:118
msgid ""
" <qt> <p><b>Image Printing Options</b></p> <p>All options controlled on "
"this page only apply to printing images. Most image file formats are "
"supported. To name a few: JPEG, TIFF, PNG, GIF, PNM (PBM/PGM/PNM/PPM), Sun "
"Raster, SGI RGB, Windows BMP. Options to influence color output of image "
"printouts are: <ul> <li> Brightness </li> <li> Hue </li> <li> "
"Saturation </li> <li> Gamma </li> </ul> <p>For a more detailed "
"explanation about Brightness, Hue, Saturation and Gamma settings, please "
"look at the 'WhatsThis' items provided for these controls. </p> </p> </qt>"
msgstr ""
#: cups/kpimagepage.cpp:136
msgid ""
" <qt> <p><b>Coloration Preview Thumbnail</b></p> <p>The coloration preview "
"thumbnail indicates change of image coloration by different settings. "
"Options to influence output are: <ul> <li> Brightness </li> <li> Hue "
"(Tint) </li> <li> Saturation </li> <li> Gamma </li> </ul> </p> "
"<p>For a more detailed explanation about Brightness, Hue, Saturation and "
"Gamma settings, please look at the 'WhatsThis' items provided for these "
"controls. </p> </qt>"
msgstr ""
#: cups/kpimagepage.cpp:152
msgid ""
" <qt> <p><b>Image Size:</b> Dropdown menu to control the image size on the "
"printed paper. Dropdown works in conjunction with slider below. Dropdown "
"options are:.</p> <ul> <li> <b>Natural Image Size:</b> Image prints in its "
"natural image size. If it does not fit onto one sheet, the printout will be "
"spread across multiple sheets. Note, that the slider is disabled when "
"selecting 'natural image size' in the dropdown menu. </li> <li> "
"<b>Resolution (ppi):</b> The resolution value slider covers a number range "
"from 1 to 1200. It specifies the resolution of the image in Pixels Per Inch "
"(PPI). An image that is 3000x2400 pixels will print 10x8 inches at 300 "
"pixels per inch, for example, but 5x4 inches at 600 pixels per inch. If the "
"specified resolution makes the image larger than the page, multiple pages "
"will be printed. Resolution defaults to 72 ppi. </li> <li> <b>% of Page "
"Size:</b> The percent value slider covers numbers from 1 to 800. It "
"specifies the size in relation to the page (not the image). A scaling of "
"100 percent will fill the page as completely as the image aspect ratio "
"allows (doing auto-rotation of the image as needed). A scaling of more than "
"100 will print the image across multiple sheets. A scaling of 200 percent "
"will print on up to 4 pages. </li> Scaling in % of page size defaults to 100 "
"%. <li> <b>% of Natural Image Size:</b> The percent value slider moves from "
"1 to 800. It specifies the printout size in relation to the natural image "
"size. A scaling of 100 percent will print the image at its natural size, "
"while a scaling of 50 percent will print the image at half its natural "
"size. If the specified scaling makes the image larger than the page, "
"multiple pages will be printed. Scaling in % of natural image size defaults "
"to 100 %. </ul> <br> <hr> <p><em><b>Additional hint for power users:</b> "
"This TDEPrint GUI element matches with the CUPS commandline job option "
"parameter:</em> <pre> -o natural-scaling=... # range in % is "
"1....800 <br> -o scaling=... # range in % is 1....800 "
"<br> -o ppi=... # range in ppi is 1...1200 </pre> </p> "
"</qt>"
msgstr ""
#: cups/kpimagepage.cpp:192
msgid ""
" <qt> <p><b>Position Preview Thumbnail</b></p> <p>This position preview "
"thumbnail indicates the position of the image on the paper sheet. <p>Click "
"on horizontal and vertical radio buttons to move image alignment on paper "
"around. Options are: <ul> <li> center </li> <li> top </li> "
"<li> top-left </li> <li> left </li> <li> bottom-left </li> <li> "
"bottom </li> <li> bottom-right</li> <li> right </li> <li> top-"
"right </li> </ul> </p> </qt>"
msgstr ""
#: cups/kpimagepage.cpp:210
msgid ""
" <qt> <p><b>Reset to Default Values</b> </p> <p> Reset all coloration "
"settings to default values. Default values are: <ul> <li> Brightness: 100 "
"</li> <li> Hue (Tint). 0 </li> <li> Saturation: 100 </li> <li> Gamma: "
"1000 </li> </ul> </p> </qt>"
msgstr ""
#: cups/kpimagepage.cpp:222
msgid ""
" <qt> <p><b>Image Positioning:</b></p> <p>Select a pair of radiobuttons "
"to move image to the position you want on the paper printout. Default is "
"'center'. </p> <br> <hr> <p><em><b>Additional hint for power users:</b> "
"This TDEPrint GUI element matches with the CUPS commandline job option "
"parameter:</em> <pre> -o position=... # examples: \"top-left\" or "
"\"bottom\" </pre> </p> </qt>"
msgstr ""
#: cups/kpimagepage.cpp:237
msgid "Image"
msgstr "Расм"
#: cups/kpimagepage.cpp:239
msgid "Color Settings"
msgstr "Ранг мосламалари"
#: cups/kpimagepage.cpp:241
msgid "Image Size"
msgstr "Расмнинг ўлчами"
#: cups/kpimagepage.cpp:243
msgid "Image Position"
msgstr "Расмнинг жойлашиши"
#: cups/kpimagepage.cpp:247
msgid "&Brightness:"
msgstr "&Ёруғлик:"
#: cups/kpimagepage.cpp:252
msgid "&Hue (Color rotation):"
msgstr ""
#: cups/kpimagepage.cpp:257
msgid "&Saturation:"
msgstr ""
#: cups/kpimagepage.cpp:262
msgid "&Gamma (Color correction):"
msgstr "&Гамма (Рангни тузатиш):"
#: cups/kpimagepage.cpp:283
msgid "&Default Settings"
msgstr "А&ндоза мосламалар"
#: cups/kpimagepage.cpp:289
msgid "Natural Image Size"
msgstr "Расмнинг табиий ўлчами"
#: cups/kpimagepage.cpp:290
msgid "Resolution (ppi)"
msgstr "Ўлчам (ppi)"
#: cups/kpimagepage.cpp:292
#, no-c-format
msgid "% of Page"
msgstr "Бетнинг фоизи"
#: cups/kpimagepage.cpp:294
#, no-c-format
msgid "% of Natural Image Size"
msgstr "Расмнинг табиий ўлчамининг фоизи"
#: cups/kpimagepage.cpp:304
msgid "&Image size type:"
msgstr "Расм ўлчамининг &тури:"
#: cups/kpschedulepage.cpp:40
msgid ""
" <qt> <p><b>Print Job Billing and Accounting</b></p> <p>Insert a meaningful "
"string here to associate the current print job with a certain account. This "
"string will appear in the CUPS \"page_log\" to help with the print "
"accounting in your organization. (Leave it empty if you do not need it.) <p> "
"It is useful for people who print on behalf of different \"customers\", like "
"print service bureaux, letter shops, press and prepress companies, or "
"secretaries who serve different bosses, etc.</p> <br> <hr> "
"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> <pre> -o "
"job-billing=... # example: \"Marketing_Department\" or \"Joe_Doe\" "
"</pre> </p> </qt>"
msgstr ""
#: cups/kpschedulepage.cpp:60
msgid ""
" <qt> <p><b>Scheduled Printing</b></p> <p>Scheduled printing lets you "
"control the time of the actual printout, while you can still send away your "
"job <b>now</b> and have it out of your way. <p> Especially useful is the "
"\"Never (hold indefinitely)\" option. It allows you to park your job until a "
"time when you (or a printer administrator) decides to manually release it. "
"<p> This is often required in enterprise environments, where you normally "
"are not allowed to directly and immediately access the huge production "
"printers in your <em>Central Repro Department</em>. However it is okay to "
"send jobs to the queue which is under the control of the operators (who, "
"after all, need to make sure that the 10,000 sheets of pink paper which is "
"required by the Marketing Department for a particular job are available and "
"loaded into the paper trays).</p> <br> <hr> <p><em><b>Additional hint for "
"power users:</b> This TDEPrint GUI element matches with the CUPS "
"commandline job option parameter:</em> <pre> -o job-hold-until=... "
"# example: \"indefinite\" or \"no-hold\" </pre> </p> </qt>"
msgstr ""
#: cups/kpschedulepage.cpp:87
msgid ""
" <qt> <p><b>Page Labels</b></p> <p>Page Labels are printed by CUPS at the "
"top and bottom of each page. They appear on the pages surrounded by a little "
"frame box. <p>They contain any string you type into the line edit field.</p> "
"<br> <hr> <p><em><b>Additional hint for power users:</b> This TDEPrint GUI "
"element matches with the CUPS commandline job option parameter:</em> "
"<pre> -o page-label=\"...\" # example: \"Company Confidential\" </"
"pre> </p> </qt>"
msgstr ""
#: cups/kpschedulepage.cpp:102
msgid ""
" <qt> <p><b>Job Priority</b></p> <p>Usually CUPS prints all jobs per queue "
"according to the \"FIFO\" principle: <em>First In, First Out</em>. <p> The "
"job priority option allows you to re-order the queue according to your "
"needs. <p> It works in both directions: you can increase as well as decrease "
"priorities. (Usually you can only control your <b>own</b> jobs). <p> Since "
"the default job priority is \"50\", any job sent with, for example, \"49\" "
"will be printed only after all those others have finished. Conversely, a "
"\"51\" or higher priority job will go right to the top of a populated queue "
"(if no other, higher prioritized one is present).</p> <br> <hr> "
"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> <pre> -o "
"job-priority=... # example: \"10\" or \"66\" or \"99\" </pre> </p> </qt>"
msgstr ""
#: cups/kpschedulepage.cpp:126
msgid "Advanced Options"
msgstr "Қўшимча параметрлар"
#: cups/kpschedulepage.cpp:137
msgid "Immediately"
msgstr "Дарҳол"
#: cups/kpschedulepage.cpp:138
msgid "Never (hold indefinitely)"
msgstr "Ҳеч қачон (чексиз ушлаб туриш)"
#: cups/kpschedulepage.cpp:139
msgid "Daytime (6 am - 6 pm)"
msgstr "Кундузи (эрталаб 6 - кечқурун 6)"
#: cups/kpschedulepage.cpp:140
#, fuzzy
msgid "Evening (6 pm - 6 am)"
msgstr "Кечқурун"
#: cups/kpschedulepage.cpp:141
#, fuzzy
msgid "Night (6 pm - 6 am)"
msgstr "Кечаси"
#: cups/kpschedulepage.cpp:142
msgid "Weekend"
msgstr "Шанба-Якшанба"
#: cups/kpschedulepage.cpp:143
msgid "Second Shift (4 pm - 12 am)"
msgstr ""
#: cups/kpschedulepage.cpp:144
msgid "Third Shift (12 am - 8 am)"
msgstr ""
#: cups/kpschedulepage.cpp:145
msgid "Specified Time"
msgstr "Кўрсатилган вақт"
#: cups/kpschedulepage.cpp:160
msgid "&Scheduled printing:"
msgstr "&Жадвал бўйича босиб чиқариш:"
#: cups/kpschedulepage.cpp:163
msgid "&Billing information:"
msgstr ""
#: cups/kpschedulepage.cpp:166
msgid "T&op/Bottom page label:"
msgstr "Бетнинг юқоридаги/пастдаги &белгиси:"
#: cups/kpschedulepage.cpp:169
msgid "&Job priority:"
msgstr "Вазифанинг &муҳимлик даражаси:"
#: cups/kpschedulepage.cpp:200
msgid "The time specified is not valid."
msgstr "Кўрсатилган вақт нотўғри."
#: cups/kptagspage.cpp:36
msgid ""
" <qt><p><b>Additional Tags</b></p> You may send additional commands to the "
"CUPS server via this editable list. There are 3 purposes for this: <ul> "
"<li>Use any current or future standard CUPS job option not supported by the "
"TDEPrint GUI. </li> <li>Control any custom job option you may want to "
"support in custom CUPS filters and backends plugged into the CUPS filtering "
"chain.</li> <li>Send short messages to the operators of your production "
"printers in your <em>Central Repro Department</em>. </ul> <p><b>Standard "
"CUPS job options:</b> A complete list of standard CUPS job options is in "
"the <a href=\"http://localhost:631/sum.html\">CUPS User Manual</a>. "
"Mappings of the kprinter user interface widgets to respective CUPS job "
"option names are named in the various <em>WhatsThis</em> help items..</p> "
"<p><b>Custom CUPS job options:</b> CUPS print servers may be customized with "
"additional print filters and backends which understand custom job options. "
"You can specify such custom job options here. If in doubt, ask your system "
"administrator..</p> <p><b> </b></p> <p><b>Operator Messages:</b> You may "
"send additional messages to the operator(s) of your production printers (e."
"g. in your <em>Central Repro Department</p>) Messages can be read by the "
"operator(s) (or yourself) by viewing the <em>\"Job IPP Report\"</em> for the "
"job.</p> <b>Examples:</b><br> <pre> A standard CUPS job option:<br> "
"<em>(Name) number-up</em> -- <em>(Value) 9</"
"em> <br> <br> A job option for custom CUPS filters or "
"backends:<br> <em>(Name) DANKA_watermark</em> -- <em>(Value) "
"Company_Confidential</em> <br> <br> A message to the operator(s):<br> "
"<em>(Name) Deliver_after_completion</em> -- <em>(Value) to_Marketing_Departm."
"</em><br> </pre> <p><b>Note:</b> the fields must not include spaces, tabs or "
"quotes. You may need to double-click on a field to edit it. <p><b>Warning:</"
"b> Do not use such standard CUPS option names which also can be used "
"through the TDEPrint GUI. Results may be unpredictable if they conflict, "
"or if they are sent multiple times. For all options supported by the GUI, "
"please do use the GUI. (Each GUI element's 'WhatsThis' names the related "
"CUPS option name.) </p> </qt>"
msgstr ""
#: cups/kptagspage.cpp:77
msgid "Additional Tags"
msgstr "Қўшимча тэглар"
#: cups/kptagspage.cpp:82 kpfilterpage.cpp:406 management/kmjobviewer.cpp:239
#: management/kmwend.cpp:51 management/kxmlcommanddlg.cpp:141
#: management/kxmlcommanddlg.cpp:545 tdefilelist.cpp:101
msgid "Name"
msgstr "Номи"
#: cups/kptagspage.cpp:83
msgid "Value"
msgstr "Қиймати"
#: cups/kptagspage.cpp:92
msgid "Read-Only"
msgstr "Фақат ўқишга"
#: cups/kptagspage.cpp:115
msgid "The tag name must not contain any spaces, tabs or quotes: <b>%1</b>."
msgstr "Тэг номида бўш жой, таб ёки қўштирноқ бўлмаслиги керак: <b>%1</b>."
#: cups/kptextpage.cpp:41
msgid ""
" <qt> <p><b>Characters Per Inch</b></p> <p>This setting controls the "
"horizontal size of characters when printing a text file. </p> <p>The default "
"value is 10, meaning that the font is scaled in a way that 10 characters "
"per inch will be printed. </p> <hr> <p><em><b>Additional hint for power "
"users:</b> This TDEPrint GUI element matches with the CUPS commandline job "
"option parameter:</em> <pre> -o cpi=... # example: \"8\" or "
"\"12\" </pre> </p> </qt>"
msgstr ""
#: cups/kptextpage.cpp:55
msgid ""
" <qt> <p><b>Lines Per Inch</b></p> <p>This setting controls the vertical "
"size of characters when printing a text file. </p> <p>The default value is "
"6, meaning that the font is scaled in a way that 6 lines per inch will be "
"printed. </p> <hr> <p><em><b>Additional hint for power users:</b> This "
"TDEPrint GUI element matches with the CUPS commandline job option parameter:"
"</em> <pre> -o lpi=... # example \"5\" or \"7\" </pre> </p> </"
"qt>"
msgstr ""
#: cups/kptextpage.cpp:69
msgid ""
" <qt> <p><b>Columns</b></p> <p>This setting controls how many columns of "
"text will be printed on each page when. printing text files. </p> <p>The "
"default value is 1, meaning that only one column of text per page will be "
"printed. </p> <hr> <p><em><b>Additional hint for power users:</b> This "
"TDEPrint GUI element matches with the CUPS commandline job option parameter:"
"</em> <pre> -o columns=... # example: \"2\" or \"4\" </pre> </p> </"
"qt>"
msgstr ""
#: cups/kptextpage.cpp:84
msgid " <qt> Preview icon changes when you turn on or off prettyprint. </qt>"
msgstr ""
#: cups/kptextpage.cpp:87
msgid ""
" <qt> <p><b>Text Formats</b></p> <p>These settings control the appearance "
"of text on printouts. They are only valid for printing text files or input "
"directly through kprinter. </p> <p><b>Note:</b> These settings have no "
"effect whatsoever for other input formats than text, or for printing from "
"applications such as the TDE Advanced Text Editor. (Applications in general "
"send PostScript to the print system, and 'kate' in particular has its own "
"knobs to control the print output. </p>. <hr> <p><em><b>Additional hint for "
"power users:</b> This TDEPrint GUI element matches with the CUPS "
"commandline job option parameter:</em> <pre> -o cpi=... # "
"example: \"8\" or \"12\" <br> -o lpi=... # example: \"5\" or "
"\"7\" <br> -o columns=... # example: \"2\" or \"4\" </pre> </p> </"
"qt>"
msgstr ""
#: cups/kptextpage.cpp:108
msgid ""
" <qt> <p><b>Margins</b></p> <p>These settings control the margins of "
"printouts on the paper. They are not valid for jobs originating from "
"applications which define their own page layout internally and send "
"PostScript to TDEPrint (such as KOffice, OpenOffice or LibreOffice). </p> "
"<p>When printing from TDE applications, such as KMail and Konqueror, or "
"printing an ASCII text file through kprinter, you can choose your preferred "
"margin settings here. </p> <p>Margins may be set individually for each edge "
"of the paper. The combo box at the bottom lets you change the units of "
"measurement between Pixels, Millimeters, Centimeters, and Inches. </p> "
"<p>You can even use the mouse to grab one margin and drag it to the intended "
"position (see the preview picture on the right side). </p> <hr> "
"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> <pre> -o "
"page-top=... # example: \"72\" <br> -o page-bottom=... # "
"example: \"24\" <br> -o page-left=... # example: \"36\" <br> -"
"o page-right=... # example: \"12\" </pre> </p> </qt>"
msgstr ""
#: cups/kptextpage.cpp:134
msgid ""
" <qt> <p><b>Turn Text Printing with Syntax Highlighting (Prettyprint) On!</"
"b></p> <p>ASCII text file printouts can be 'prettyfied' by enabling this "
"option. If you do so, a header is printed at the top of each page. The "
"header contains the page number, job title (usually the filename), and the "
"date. In addition, C and C++ keywords are highlighted, and comment lines "
"are italicized.</p> <p>This prettyprint option is handled by CUPS.</p> "
"<p>If you prefer another 'plaintext-to-prettyprint' converter, look for the "
"<em>enscript</em> pre-filter on the <em>Filters</em> tab. </p> <br> <hr> "
"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> <pre> -o "
"prettyprint=true. </pre> </p> </qt>"
msgstr ""
#: cups/kptextpage.cpp:153
msgid ""
" <qt> <p><b>Turn Text Printing with Syntax Highlighting (Prettyprint) Off! "
"</b></p> <p>ASCII text file printing with this option turned off are "
"appearing without a page header and without syntax highlighting. (You can "
"still set the page margins, though.) </p> <br> <hr> <p><em><b>Additional "
"hint for power users:</b> This TDEPrint GUI element matches with the CUPS "
"commandline job option parameter:</em> <pre> -o prettyprint=false </"
"pre> </p> </qt>"
msgstr ""
#: cups/kptextpage.cpp:167
msgid ""
" <qt> <p><b>Print Text with Syntax Highlighting (Prettyprint)</b></p> "
"<p>ASCII file printouts can be 'prettyfied' by enabling this option. If you "
"do so, a header is printed at the top of each page. The header contains "
"the page number, job title (usually the filename), and the date. In "
"addition, C and C++ keywords are highlighted, and comment lines are "
"italicized.</p> <p>This prettyprint option is handled by CUPS.</p> <p>If "
"you prefer another 'plaintext-to-prettyprint' converter, look for the "
"<em>enscript</em> pre-filter on the <em>Filters</em> tab. </p> <br> <hr> "
"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> <pre> -o "
"prettyprint=true. <br> -o prettyprint=false </pre> </p> </qt>"
msgstr ""
#: cups/kptextpage.cpp:188
msgid "Text"
msgstr "Матн"
#: cups/kptextpage.cpp:191
msgid "Text Format"
msgstr "Матн формати"
#: cups/kptextpage.cpp:193
msgid "Syntax Highlighting"
msgstr ""
#: cups/kptextpage.cpp:195 kpmarginpage.cpp:42 kpmarginpage.cpp:45
msgid "Margins"
msgstr "Бўш жой"
#: cups/kptextpage.cpp:200
msgid "&Chars per inch:"
msgstr "Бир дюймга ҳ&арфлар сони:"
#: cups/kptextpage.cpp:204
msgid "&Lines per inch:"
msgstr "Бир дюймга &сатрлар сони:"
#: cups/kptextpage.cpp:208
msgid "C&olumns:"
msgstr "&Устунлар:"
#: cups/kptextpage.cpp:216
msgid "&Disabled"
msgstr "Ўчири&лган"
#: cups/kptextpage.cpp:218
msgid "&Enabled"
msgstr "&Ёқилган"
#: driver.cpp:379 kpgeneralpage.cpp:261 lpd/lpdtools.cpp:307
#: management/kmconfiggeneral.cpp:44 management/kmpropgeneral.cpp:54
#: management/kmwend.cpp:49
msgid "General"
msgstr "Умумий"
#: driver.cpp:387 foomatic2loader.cpp:268
msgid "Adjustments"
msgstr "Мосламалар"
#: driver.cpp:389
msgid "JCL"
msgstr "JCL"
#: driver.cpp:391 management/kmwlocal.cpp:60
msgid "Others"
msgstr "Бошқа"
#: driverview.cpp:47
msgid ""
" <qt> <b>List of Driver Options (from PPD)</b>. <p>The upper pane of this "
"dialog page contains all printjob options as laid down in the printer's "
"description file (PostScript Printer Description == 'PPD') </p> <p>Click on "
"any item in the list and watch the lower pane of this dialog page display "
"the available values. </p> <p>Set the values as needed. Then use one of the "
"pushbuttons below to proceed:</p> <ul> <li><em>'Save'</em> your settings "
"if you want to re-use them in your next job(s) too. <em>'Save'</em> will "
"store your settings permanently until you change them again. </li>. "
"<li>Click <em>'OK'</em> (without a prior click on <em>'Save'</em>, if you "
"want to use your selected settings just once, for the next print job. "
"<em>'OK'</em> will forget your current settings when kprinter is closed "
"again, and will start next time with the previously saved defaults. </li> "
"<li><em>'Cancel'</em> will not change anything. If you proceed to print "
"after clicking <em>'Cancel'</em>, the job will print with the default "
"settings of this queue. </ul> <p><b>Note.</b> The number of available job "
"options depends strongly on the actual driver used for your print queue. "
"<em>'Raw'</em> queues do not have a driver or a PPD. For raw queues this "
"tab page is not loaded by TDEPrint, and thus is not present in the kprinter "
"dialog.</p> </qt>"
msgstr ""
#: driverview.cpp:71
msgid ""
" <qt> <b>List of Possible Values for given Option (from PPD)</b>. <p>The "
"lower pane of this dialog page contains all possible values of the "
"printoption highlighted above, as laid down in the printer's description "
"file (PostScript Printer Description == 'PPD') </p> <p>Select the value you "
"want and proceed. </p> <p>Then use one of the pushbuttons below to leave "
"this dialog:</p> <ul> <li><em>'Save'</em> your settings if you want to re-"
"use them in your next job(s) too. <em>'Save'</em> will store your settings "
"permanently until you change them again. </li>. <li>Click <em>'OK'</em> if "
"you want to use your selected settings just once, for the next print job. "
"<em>'OK'</em> will forget your current settings when kprinter is closed "
"again, and will start next time with your previous defaults. </li> "
"<li><em>'Cancel'</em> will not change anything. If you proceed to print "
"after clicking <em>'Cancel'</em>, the job will print with the default "
"settings of this queue. </ul> <p><b>Note.</b> The number of available job "
"options depends strongly on the actual driver used for your print queue. "
"<em>'Raw'</em> queues do not have a driver or a PPD. For raw queues this "
"tab page is not loaded by TDEPrint, and thus is not present in the kprinter "
"dialog.</p> </qt>"
msgstr ""
#: droptionview.cpp:61
msgid "Value:"
msgstr "Қиймати:"
#: droptionview.cpp:167
msgid "String value:"
msgstr ""
#: droptionview.cpp:306 droptionview.cpp:341
msgid "No Option Selected"
msgstr "Ҳеч қандай параметр танлангани йўқ"
#: ext/kextprinterimpl.cpp:47
msgid "Empty print command."
msgstr "Босиб чиқариш буйруғи кўрсатилмаган."
#: ext/kmextmanager.cpp:41
msgid "PS_printer"
msgstr ""
#: ext/kmextmanager.cpp:43
msgid "PostScript file generator"
msgstr "PostScript-файл яратувчи"
#: foomatic/kfoomaticprinterimpl.cpp:51 lpdunix/klpdunixprinterimpl.cpp:72
msgid ""
"No valid print executable was found in your path. Check your installation."
msgstr ""
"Босиб чиқариш учун керак бўлган буйруқ сизнинг $PATH муҳит ўзгарувчингизда "
"кўрсатилган директориялар ичида топилмади."
#: foomatic/kmfoomaticmanager.cpp:70
msgid "This is not a Foomatic printer"
msgstr "Бу Foomatic принтери эмас"
#: foomatic/kmfoomaticmanager.cpp:75
msgid "Some printer information are missing"
msgstr "Принтернинг баъзи маълумотлари етишмаяпти"
#: kmfactory.cpp:221
msgid "<qt>There was an error loading %1. The diagnostic is:<p>%2</p></qt>"
msgstr "<qt>Қуйидагини юклашда хато рўй берди.<p>%1</p>Сабаби:<p>%2</p></qt>"
#: kmjob.cpp:114
msgid "Queued"
msgstr "Навбатга қўйилди"
#: kmjob.cpp:117
msgid "Held"
msgstr "Вақтинча тўхтатилди"
#: kmjob.cpp:123
msgid "Canceled"
msgstr "Бекор қилинди"
#: kmjob.cpp:126
msgid "Aborted"
msgstr "Тўхтатилди"
#: kmjob.cpp:129
msgid "Completed"
msgstr "Тугатилди"
#: kmmanager.cpp:70
msgid "This operation is not implemented."
msgstr "Бу амалга оширилгани йўқ."
#: kmmanager.cpp:169
msgid "Unable to locate test page."
msgstr "Синов бети топилмади."
#: kmmanager.cpp:450
msgid "Can't overwrite regular printer with special printer settings."
msgstr ""
#: kmmanager.cpp:479
#, c-format
msgid "Parallel Port #%1"
msgstr "Параллел порт #%1"
#: kmmanager.cpp:487 kmmanager.cpp:503 kxmlcommand.cpp:661
#, c-format
msgid "Unable to load TDE print management library: %1"
msgstr "TDE босиб чиқариш кутубхонасини юклаб бўлмади: %1"
#: kmmanager.cpp:492 kxmlcommand.cpp:669
msgid "Unable to find wizard object in management library."
msgstr ""
#: kmmanager.cpp:508
msgid "Unable to find options dialog in management library."
msgstr ""
#: kmmanager.cpp:535
msgid "No plugin information available"
msgstr "Плагин ҳақида маълумот мавжуд эмас"
#: kmprinter.cpp:144
msgid "(rejecting jobs)"
msgstr "(вазифаларни қабул қилмаяпти)"
#: kmprinter.cpp:144
msgid "(accepting jobs)"
msgstr "(вазифаларни қабул қилаяпти)"
#: kmprinter.cpp:197 kprintdialog.cpp:983
msgid "All Files"
msgstr "Ҳамма файллар"
#: kmspecialmanager.cpp:53
msgid ""
"A file share/tdeprint/specials.desktop was found in your local TDE "
"directory. This file probably comes from a previous TDE release and should "
"be removed in order to manage global pseudo printers."
msgstr ""
#: kmuimanager.cpp:158
#, c-format
msgid "Configuration of %1"
msgstr "%1 мосламаси"
#: kmvirtualmanager.cpp:161
msgid ""
"<qt>You are about to set a pseudo-printer as your personal default. This "
"setting is specific to TDE and will not be available outside TDE "
"applications. Note that this will only make your personal default printer as "
"undefined for non-TDE applications and should not prevent you from printing "
"normally. Do you really want to set <b>%1</b> as your personal default?</qt>"
msgstr ""
#: kmvirtualmanager.cpp:166 management/kminstancepage.cpp:91
msgid "Set as Default"
msgstr "Андоза деб белгилаш"
#: kpcopiespage.cpp:46
msgid ""
" <qt><p><b>Page Selection</b></p> <p>Here you can control if you print a "
"certain selection only out of all the pages from the complete document. </p> "
"</qt>"
msgstr ""
#: kpcopiespage.cpp:51
msgid ""
" <qt><b>All Pages:</b> Select \"All\" to print the complete document. Since "
"this is the default, it is pre-selected. </p> </qt>"
msgstr ""
#: kpcopiespage.cpp:55
msgid ""
" <qt><b>Current Page:</b> Select <em>\"Current\"</em> if you want to print "
"the page currently visible in your TDE application.</p> <p><b>Note:</b> this "
"field is disabled if you print from non-TDE applications like Firefox, "
"PaleMoon, SeaMonkey or OpenOffice and LibreOffice, since here TDEPrint has "
"no means to determine which document page you are currently viewing.</p></qt>"
msgstr ""
#: kpcopiespage.cpp:61
msgid ""
" <qt><b>Page Range:</b> Choose a \"Page Range\" to select a subset of the "
"complete document pages to be printed. The format is <em>\"n,m,o-p,q,r,s-t, u"
"\"</em>.</p> <p><b>Example:</b> <em>\"4,6,10-13,17,20,23-25\"</em> will "
"print the pages 4, 6, 10, 11, 12, 13, 17, 20, 23, 24, 25 of your document.</"
"p> <br> <hr> <p><em><b>Additional hint for power users:</b> This TDEPrint "
"GUI element matches with the CUPS commandline job option parameter:</em> "
"<pre> -o page-ranges=... # example: \"4,6,10-13,17,20,23-25\" </pre> "
"</p> </qt>"
msgstr ""
#: kpcopiespage.cpp:75
msgid ""
" <qt><b>Page Set:</b> <p>Choose <em>\"All Pages\"</em>, <em>\"Even Pages\"</"
"em> or <em>\"Odd Pages\"</em> if you want to print a page selection matching "
"one of these terms. The default is <em>\"All Pages\"</em>.</p> <p><b>Note:</"
"b> If you combine a selection of a <em>\"Page Range\"</em> with a <em>\"Page "
"Set\"</em> of <em>\"Odd\"</em> or <em>\"Even\"</em>, you will only get the "
"odd or even pages from the originally selected page range. This is useful if "
"you odd or even pages from the originally selected page range. This is "
"useful if you want to print a page range in duplex on a simplex-only "
"printer. In this case you can feed the paper to the printer twice; in the "
"first pass, select \"Odd\" or \"Even\" (depending on your printer model), in "
"second pass select the other option. You may need to <em>\"Reverse\"</em> "
"the output in one of the passes (depending on your printer model).</p> "
"<br> <hr> <p><em><b>Additional hint for power users:</b> This TDEPrint GUI "
"element matches with the CUPS commandline job option parameter:</em> "
"<pre> -o page-set=... # example: \"odd\" or \"even\" </pre> </p> "
"</qt>"
msgstr ""
#: kpcopiespage.cpp:98
msgid ""
" <qt><b>Output Settings:</b> Here you can determine the number of copies, "
"the output order and the collate mode for the pages of your printjob. (Note, "
"that the maximum number of copies allowed to print may be restricted by "
"your print subsystem.)</p> <p>The 'Copies' setting defaults to 1. </p> "
"<br> <hr> <p><em><b>Additional hint for power users:</b> This TDEPrint GUI "
"element matches with the CUPS commandline job option parameter:</em> "
"<pre> -o copies=... # examples: \"5\" or \"42\" <br> -o "
"outputorder=... # example: \"reverse\" <br> -o "
"Collate=... # example: \"true\" or \"false\" </pre> </p> .</qt>"
msgstr ""
#: kpcopiespage.cpp:116
msgid ""
" <qt><b>Number of Copies:</b> Determine the number of requested copies here. "
"You can increase or decrease the number of printed copies by clicking on the "
"up and down arrows. You can also type the figure directly into the box. </p> "
"<br> <hr> <p><em><b>Additional hint for power users:</b> This TDEPrint GUI "
"element matches with the CUPS commandline job option parameter:</em> "
"<pre> -o copies=... # examples: \"5\" or \"42\" </pre> </p> "
"</qt>"
msgstr ""
#: kpcopiespage.cpp:129
msgid ""
" <qt><b>Collate Copies</b> <p>If the <em>\"Collate\"</em> checkbox is "
"enabled (default), the output order for multiple copies of a multi-page "
"document will be \"1-2-3-..., 1-2-3-..., 1-2-3-...\".</p> <p>If the <em>"
"\"Collate\"</em> checkbox is disabled, the output order for multiple copies "
"of a multi-page document will be \"1-1-1-..., 2-2-2-..., 3-3-3-...\".</p> "
"<br> <hr> <p><em><b>Additional hint for power users:</b> This TDEPrint GUI "
"element matches with the CUPS commandline job option parameter:</em> "
"<pre> -o Collate=... # example: \"true\" or \"false\" </pre> "
"</p> </qt>"
msgstr ""
#: kpcopiespage.cpp:143
msgid ""
" <qt><b>Reverse Order</b> <p> If the <em>\"Reverse\"</em> checkbox is "
"enabled, the output order for multiple copies of a multi-page document will "
"be \"...-3-2-1, ...-3-2-1, ...-3-2-1\", if you also have <em>en</em>abled "
"the <em>\"Collate\"</em> checkbox at the same time (the usual usecase).</p> "
"<p>If the <em>\"Reverse\"</em> checkbox is enabled, the output order for "
"multiple copies of a multi-page document will be "
"\"...-3-3-3, ...-2-2-2, ...-1-1-1\", if you have <em>dis</em>abled the <em>"
"\"Collate\"</em> checkbox at the same time. </p> <br> <hr> "
"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> <pre> -o "
"outputorder=... # example: \"reverse\" </pre> </p> </qt>"
msgstr ""
#: kpcopiespage.cpp:164
msgid "C&opies"
msgstr "&Нусха"
#: kpcopiespage.cpp:168
msgid "Page Selection"
msgstr "Бетни танлаш"
#: kpcopiespage.cpp:170
msgid "&All"
msgstr "&Ҳаммаси"
#: kpcopiespage.cpp:172
msgid "Cu&rrent"
msgstr "&Жорий"
#: kpcopiespage.cpp:174
msgid "Ran&ge"
msgstr "С&оҳа"
#: kpcopiespage.cpp:179
msgid ""
"<p>Enter pages or group of pages to print separated by commas (1,2-5,8).</p>"
msgstr ""
"<p>Босиб чиқариш учун вергул билан ажратилган бетларни киритинг. Масалан: "
"1,2-5,8.</p>"
#: kpcopiespage.cpp:183
msgid "Output Settings"
msgstr "Чиқариш мосламалари"
#: kpcopiespage.cpp:185
msgid "Co&llate"
msgstr ""
#: kpcopiespage.cpp:187
msgid "Re&verse"
msgstr "&Тескари тартибда"
#: kpcopiespage.cpp:192
msgid "Cop&ies:"
msgstr "&Нусха:"
#: kpcopiespage.cpp:199
msgid "All Pages"
msgstr "Ҳамма бетлар"
#: kpcopiespage.cpp:200
msgid "Odd Pages"
msgstr "Тоқ бетлар"
#: kpcopiespage.cpp:201
msgid "Even Pages"
msgstr "Жуфт бетлар"
#: kpcopiespage.cpp:203
msgid "Page &set:"
msgstr "Бетлар &тўплами:"
#: kpcopiespage.cpp:258
msgid "Pages"
msgstr "Бетлар"
#: kpdriverpage.cpp:30 management/kmpropdriver.cpp:54
msgid "Driver Settings"
msgstr "Драйвер мосламалари"
#: kpdriverpage.cpp:48
msgid ""
"<qt>Some options selected are in conflict. You must resolve these conflicts "
"before continuing. See <b>Driver Settings</b> tab for detailed information.</"
"qt>"
msgstr ""
#: kpfileselectpage.cpp:33
msgid "&Files"
msgstr "&Файллар"
#: kpfilterpage.cpp:42
msgid ""
" <qt> <b>Add Filter button</b> <p>This button calls a little dialog to let "
"you select a filter here. </p> <p><b>Note 1:</b> You can chain different "
"filters as long as you make sure that the output of one fits as input of "
"the next. (TDEPrint checks your filtering chain and will warn you if you "
"fail to do so.</p> <p><b>Note 2:</b> The filters you define here are "
"applied to your jobfile <em><b>before</b></em> it is handed downstream to "
"your spooler and print subsystem (e.g. CUPS, LPRng, LPD).</p> </ul> </qt>"
msgstr ""
#: kpfilterpage.cpp:54
msgid ""
" <qt> <b>Remove Filter button</b> <p>This button removes the highlighted "
"filter from the list of filters. </qt>"
msgstr ""
#: kpfilterpage.cpp:59
msgid ""
" <qt> <b>Move Filter Up button</b> <p>This button moves the highlighted "
"filter up in the list of filters, towards the front of the filtering chain. "
"</p> </qt>"
msgstr ""
#: kpfilterpage.cpp:64
msgid ""
" <qt> <b>Move Filter Down button</b> <p>This button moves the highlighted "
"filter down in the list of filters, towards the end of the filtering chain.."
"</p> </qt>"
msgstr ""
#: kpfilterpage.cpp:69
msgid ""
" <qt> <b>Configure Filter button</b> <p>This button lets you configure the "
"currently highlighted filter. It opens a separate dialog. </p> </qt>"
msgstr ""
#: kpfilterpage.cpp:75
msgid ""
" <qt> <b>Filter Info Pane</b> <p>This field shows some general info about "
"the selected filter. Amongst them are: <ul> <li>the <em>filter name</em> "
"(as displayed in the TDEPrint user interface); </li> <li>the <em>filter "
"requirements</em> (that is the external program that needs to present and "
"executable on this system); </li> <li>the <em>filter input format</em> (in "
"the form of one or several <em>MIME types</em> accepted by the filter); </"
"li> <li>the <em>filter output format</em> (in the form of a <em>MIME type</"
"em> generated by the filter); </li> <li>a more or less verbose text "
"describing the filter's operation.</li> </ul> </p> </qt>"
msgstr ""
#: kpfilterpage.cpp:91
msgid ""
" <qt> <b>Filtering Chain</b> (if enabled, is run <em>before</em> actual job "
"submission to print system) <p>This field shows which filters are currently "
"selected to act as 'pre-filters' for TDEPrint. Pre-filters are processing "
"the print files <em>before</em> they are send downstream to your real print "
"subsystem. </p> <p>The list shown in this field may be empty (default). </"
"p> <p>The pre-filters act on the printjob in the order they are listed "
"(from top to bottom). This is done by acting as a <em>filtering chain</em> "
"where the output of one filter acts as input to the next. By putting the "
"filters into the wrong order, you can make the filtering chain fail. For "
"example: if your file is ASCII text, and you want the output being "
"processed by the 'Multipage per Sheet' filter, the first filter must be one "
"that processes ASCII into PostScript. </p> <p>TDEPrint can utilize <em>any</"
"em> external filtering program which you may find useful through this "
"interface. </p> <p>TDEPrint ships preconfigured with support for a "
"selection of common filters. These filters however need to be installed "
"independently from TDEPrint. These pre-filters work <em>for all</em> print "
"subsystems supported by TDEPrint (such as CUPS, LPRng and LPD), because they "
"are not depending on these.</p> .<p> Amongst the pre-configured filters "
"shipping with TDEPrint are: </p> <ul> <li>the <em>Enscript text filter</"
"em> </li> <li>a <em>Multiple Pages per Sheet filter</em </li> <li>a "
"<em>PostScript to PDF converter</em>.</li> <li>a <em>Page Selection/"
"Ordering filter</em>.</li> <li>a <em>Poster Printing filter</em>.</li> "
"<li>and some more..</li> </ul> To insert a filter into this list, simply "
"click on the <em>funnel</em> icon (topmost on the right icon column group) "
"and proceed. </p> <p>Please click on the other elements of this dialog to "
"learn more about the TDEPrint pre-filters. </p> </qt>"
msgstr ""
#: kpfilterpage.cpp:125
msgid "Filters"
msgstr "Филтерлар"
#: kpfilterpage.cpp:141
msgid "Add filter"
msgstr "Филтерни қўшиш"
#: kpfilterpage.cpp:146
msgid "Remove filter"
msgstr "Филтерни олиб ташлаш"
#: kpfilterpage.cpp:151
msgid "Move filter up"
msgstr "Филтерни юқорига кўчириш"
#: kpfilterpage.cpp:156
msgid "Move filter down"
msgstr "Филтерни пастга кўчириш"
#: kpfilterpage.cpp:161
msgid "Configure filter"
msgstr "Филтерни мослаш"
#: kpfilterpage.cpp:279
msgid "Internal error: unable to load filter."
msgstr "Ички хато: филтерни юклаб бўлмади."
#: kpfilterpage.cpp:394
msgid ""
"<p>The filter chain is wrong. The output format of at least one filter is "
"not supported by its follower. See <b>Filters</b> tab for more information.</"
"p>"
msgstr ""
#: kpfilterpage.cpp:407 management/kxmlcommanddlg.cpp:840
msgid "Requirements"
msgstr "Талаблар"
#: kpfilterpage.cpp:408
msgid "Input"
msgstr "Кириш"
#: kpfilterpage.cpp:409 tools/escputil/escpwidget.cpp:217
msgid "Output"
msgstr "Чиқиш"
#: kpgeneralpage.cpp:86
msgid "ISO A4"
msgstr "ISO A4"
#: kpgeneralpage.cpp:87 lpd/lpdtools.cpp:30 util.h:72
msgid "US Letter"
msgstr ""
#: kpgeneralpage.cpp:88 lpd/lpdtools.cpp:29 util.h:71
msgid "US Legal"
msgstr ""
#: kpgeneralpage.cpp:89 lpd/lpdtools.cpp:28 util.h:69
msgid "Ledger"
msgstr ""
#: kpgeneralpage.cpp:90 util.h:68
msgid "Folio"
msgstr ""
#: kpgeneralpage.cpp:91
msgid "US #10 Envelope"
msgstr ""
#: kpgeneralpage.cpp:92
msgid "ISO DL Envelope"
msgstr ""
#: kpgeneralpage.cpp:93 util.h:70
msgid "Tabloid"
msgstr ""
#: kpgeneralpage.cpp:94
msgid "ISO A3"
msgstr "ISO A3"
#: kpgeneralpage.cpp:95
msgid "ISO A2"
msgstr "ISO A2"
#: kpgeneralpage.cpp:96
msgid "ISO A1"
msgstr "ISO A1"
#: kpgeneralpage.cpp:97
msgid "ISO A0"
msgstr "ISO A0"
#: kpgeneralpage.cpp:107
msgid "Upper Tray"
msgstr ""
#: kpgeneralpage.cpp:108
msgid "Lower Tray"
msgstr ""
#: kpgeneralpage.cpp:109
msgid "Multi-Purpose Tray"
msgstr ""
#: kpgeneralpage.cpp:110
msgid "Large Capacity Tray"
msgstr ""
#: kpgeneralpage.cpp:114
msgid "Normal"
msgstr "Оддий"
#: kpgeneralpage.cpp:115
msgid "Transparency"
msgstr "Шаффофлик"
#: kpgeneralpage.cpp:124
msgid ""
" <qt> <p><b>\"General\"</b> </p> <p>This dialog page contains <em>general</"
"em> print job settings. General settings are applicable to most printers, "
"most jobs and most job file types. <p>To get more specific help, enable "
"the \"WhatsThis\" cursor and click on any of the text labels or GUI "
"elements of this dialog. </qt>"
msgstr ""
#: kpgeneralpage.cpp:132
msgid ""
" <qt> <p><b>Page size:</b> Select paper size to be printed on from the "
"drop-down menu. </p> <p>The exact list of choices depends on the printer "
"driver (\"PPD\") you have installed.</p> <br> <hr> <p><em><b>Additional "
"hint for power users:</b> This TDEPrint GUI element matches with the CUPS "
"commandline job option parameter:</em> <pre> -o PageSize=... # "
"examples: \"A4\" or \"Letter\" </pre> </p> </qt>"
msgstr ""
#: kpgeneralpage.cpp:145
msgid ""
" <qt> <p><b>Paper type:</b> Select paper type to be printed on from the "
"drop-down menu. </p> <p>The exact list of choices depends on the printer "
"driver (\"PPD\") you have installed. </p> <br> <hr> <p><em><b>Additional "
"hint for power users:</b> This TDEPrint GUI element matches with the CUPS "
"commandline job option parameter:</em> <pre> -o MediaType=... # "
"example: \"Transparency\" </pre> </p> </qt>"
msgstr ""
#: kpgeneralpage.cpp:158
msgid ""
" <qt> <p><b>Paper source:</b> Select paper source tray for the paper to be "
"printed on from the drop-down menu. <p>The exact list of choices depends on "
"the printer driver (\"PPD\") you have installed. </p> <br> <hr> "
"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> <pre> -o "
"InputSlot=... # examples: \"Lower\" or \"LargeCapacity\" </pre> </"
"p> </qt>"
msgstr ""
#: kpgeneralpage.cpp:171
msgid ""
" <qt> <p><b>Image Orientation:</b> Orientation of the printed page image "
"on your paper is controlled by the radio buttons. By default, the "
"orientation is <em>Portrait</em> <p>You can select 4 alternatives: <ul> "
"<li> <b>Portrait.</b>.Portrait is the default setting. </li> <li> "
"<b>Landscape.</b> </li> <li> <b>Reverse Landscape.</b> Reverse Landscape "
"prints the images upside down. </li> <li> <b>Reverse Portrait.</b> Reverse "
"Portrait prints the image upside down.</li> </ul> The icon changes "
"according to your selection.</p> <br> <hr> <p><em><b>Additional hint for "
"power users:</b> This TDEPrint GUI element matches with the CUPS "
"commandline job option parameter:</em> <pre> -o orientation-"
"requested=... # examples: \"landscape\" or \"reverse-portrait\" </"
"pre> </p> </qt>"
msgstr ""
#: kpgeneralpage.cpp:192
msgid ""
" <qt> <p><b>Duplex Printing:</b> These controls may be grayed out if your "
"printer does not support <em>duplex printing</em> (i.e. printing on both "
"sides of the sheet). These controls are active if your printer supports "
"duplex printing. <p> You can choose from 3 alternatives: </p> <ul> <li> "
"<b>None.</b> This prints each page of the job on one side of the sheets "
"only. </li> <li> <b>Long Side.</b> This prints the job on both sides of the "
"paper sheets. It prints the job in a way so that the backside has the same "
"orientation as the front side if you turn the paper over the long edge. "
"(Some printer drivers name this mode <em>duplex-non-tumbled</em>). </li> "
"<li> <b>Short Side.</b> This prints the job on both sides of the paper "
"sheets. It prints the job so that the backside has the reverse orientation "
"from the front side if you turn the paper over the long edge, but the same "
"orientation, if you turn it over the short edge. (Some printer drivers name "
"this mode <em>duplex-tumbled</em>). </li> </ul> <hr> "
"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> <pre> -o "
"duplex=... # examples: \"tumble\" or \"two-sided-short-edge\" </pre> "
"</p> </qt>"
msgstr ""
#: kpgeneralpage.cpp:218
msgid ""
" <qt> <p><b>Banner Page(s):</b> Select banner(s) to print one or two "
"special sheets of paper just before or after your main job. </p> <p>Banners "
"may contain some pieces of job information, such as user name, time of "
"printing, job title and more. </p> <p>Banner pages are useful to separate "
"different jobs more easily, especially in a multi-user environment. </p> "
"<p><em><b>Hint:</em></b> You can design your own banner pages. To make use "
"of them, just put the banner file into the standard CUPS <em>banners</em> "
"directory (This is usually <em>\"/usr/share/cups/banner/\"</em> Your custom "
"banner(s) must have one of the supported printable formats. Supported "
"formats are ASCII text, PostScript, PDF and nearly any image format such as "
"PNG, JPEG or GIF. Your added banner pages will appear in the drop down menu "
"after a restart of CUPS. </p> <p>CUPS comes with a selection of banner "
"pages. </p> <br> <hr> <p><em><b>Additional hint for power users:</b> This "
"TDEPrint GUI element matches with the CUPS commandline job option parameter:"
"</em> <pre> -o job-sheets=... # examples: \"standard\" or "
"\"topsecret\" </pre> </p> </qt>"
msgstr ""
#: kpgeneralpage.cpp:240
msgid ""
" <qt> <p><b>Pages per Sheet:</b> You can choose to print more than one "
"page onto each sheet of paper. This is sometimes useful to save paper. </p> "
"<p><b>Note 1:</b> the page images get scaled down accordingly to print 2 or "
"4 pages per sheet. The page image does not get scaled if you print 1 page "
"per sheet (the default setting.). <p><b>Note 2:</b> If you select multiple "
"pages per sheet here, the scaling and re-arranging is done by your printing "
"system. Be aware, that some printers can by themselves print multiple pages "
"per sheet. In this case you find the option in the printer driver settings. "
"Be careful: if you enable multiple pages per sheet in both places, your "
"printout will not look as you intended. </p> <br> <hr> "
"<p><em><b>Additional hint for power users:</b> This TDEPrint GUI element "
"matches with the CUPS commandline job option parameter:</em> <pre> -o "
"number-up=... # examples: \"2\" or \"4\" </pre> </p> </qt>"
msgstr ""
#: kpgeneralpage.cpp:264 kpqtpage.cpp:118
msgid "Page s&ize:"
msgstr "&Бетнинг ўлчами:"
#: kpgeneralpage.cpp:268
msgid "Paper t&ype:"
msgstr "&Қоғознинг тури:"
#: kpgeneralpage.cpp:272
msgid "Paper so&urce:"
msgstr "Қоғознинг &манбаи:"
#: kpgeneralpage.cpp:292
msgid "Duplex Printing"
msgstr "Икки тарафлама босиб чиқариш"
#: kpgeneralpage.cpp:295 kpqtpage.cpp:143
msgid "Pages per Sheet"
msgstr "Варақга бет сони"
#: kpgeneralpage.cpp:301 kpqtpage.cpp:125
msgid "&Portrait"
msgstr "&Узунасига"
#: kpgeneralpage.cpp:302 kpqtpage.cpp:128
msgid "&Landscape"
msgstr "&Энига"
#: kpgeneralpage.cpp:303
msgid "&Reverse landscape"
msgstr "&Тескари энига"
#: kpgeneralpage.cpp:304
msgid "R&everse portrait"
msgstr "Те&скари узунасига"
#: kpgeneralpage.cpp:309
msgid ""
"_: duplex orientation\n"
"&None"
msgstr "&Йўқ"
#: kpgeneralpage.cpp:310
msgid ""
"_: duplex orientation\n"
"Lon&g side"
msgstr "&Узун тарафи"
#: kpgeneralpage.cpp:311
msgid ""
"_: duplex orientation\n"
"S&hort side"
msgstr "Қи&сқа тарафи"
#: kpgeneralpage.cpp:323
msgid "S&tart:"
msgstr "&Боши:"
#: kpgeneralpage.cpp:324
msgid "En&d:"
msgstr "&Охири:"
#: kpgeneralpage.cpp:416 lpd/lpdtools.cpp:40 management/kmconfiggeneral.cpp:52
msgid "Disabled"
msgstr "Ўчирилган"
#: kpgeneralpage.cpp:417 lpd/lpdtools.cpp:39 lpr/editentrydialog.cpp:50
msgid "Enabled"
msgstr "Ёқилган"
#: kpposterpage.cpp:42
msgid " <qt> 5. </qt>"
msgstr ""
#: kpposterpage.cpp:46
msgid ""
" <qt> <b>Print Poster</b> (enabled or disabled). <p>If you enable this "
"option, you can print posters of different sizes The printout will happen "
"in the form <em>'tiles'</em> printed on smaller paper sizes, which you can "
"stitch together later. <em>If you enable this option here, the <em>'Poster "
"Printing' filter</em> will be auto-loaded in the 'Filters' tab of this "
"dialog. </p> <p>This tab is only visible if the external <em>'poster'</em> "
"utility is discovered by TDEPrint on your system. [<em>'poster'</em> is a "
"commandline utility that enables you to convert PostScript files into tiled "
"printouts which allow for oversized appearance of the stitched-together "
"tiles.] </p> <p><b>Note:</b> The standard version of 'poster' will not work. "
"Your system must use a patched version of 'poster'. Ask your operating "
"system vendor to provide a patched version of 'poster' if he does not "
"already. </p> </qt>"
msgstr ""
#: kpposterpage.cpp:62
msgid ""
" <qt> <b>Tile Selection widget</b> <p>This GUI element is <em>not only for "
"viewing</em> your selections: it also lets you interactively select the "
"tile(s) you want to print. </p> <p><b>Hints</b> <ul> <li>Click any tile "
"to select it for printing.</li> <li>To select multiple tiles to be printed "
"at once, <em>'shift-click'</em> on the tiles ('shift-click' means: hold down "
"the [SHIFT]-key on your keyboard and click with the mouse while [SHIFT]-key "
"is held.) <em>Be aware</em> that the order of your clicking is also "
"significant to the order of printing the different tiles. </li> </ul> "
"<b>Note 1:</b> The order of your selection (and the order for printout of "
"the tiles) is indicated by the contents of the text field below, labelled "
"as <em>'Tile pages (to be printed):'</em><p> <b>Note 2:</b> By default no "
"tile is selected. Before you can print (a part of) your poster, you must "
"select at least one tile. </p> </qt>"
msgstr ""
#: kpposterpage.cpp:83
msgid ""
" <qt> <b>Poster Size</b> <p>Select the poster size you want from the "
"dropdown list. </p> Available sizes are all standard paper sizes up to "
"'A0'. [A0 is the same size as 16 sheets of A4, or '84cm x 118.2cm'.] </p> "
"<p><b>Notice</b>, how the little preview window below changes with your "
"change of poster size. It indicates to you how many tiles need to be "
"printed to make the poster, given the selected paper size.</p> <p><b>Hint:"
"</b> The little preview window below is not just a passive icon. You can "
"click on its individual tiles to select them for printing. To select "
"multiple tiles to be printed at once, you need to <em>'shift-click'</em> on "
"the tiles ('shift-click' means: hold down the [SHIFT]-key on your keyboard "
"and click with the mouse while [SHIFT]-key is held.) The order of your "
"clicking is significant to the order of printing the different tiles. The "
"order of your selection (and for the printed tiles) is indicated by the "
"contents of the text field labelled as <em>'Tile pages (to be printed):'</"
"em><p> <b>Note:</b> By default no tile is selected. Before you can print (a "
"part of) your poster, you must select at least one tile. </p> </qt>"
msgstr ""
#: kpposterpage.cpp:102
msgid ""
" <qt> <b>Paper Size</b> <p>This field indicates the paper size the poster "
"tiles will be printed on. To select a different paper size for your poster "
"tiles, go to the 'General' tab of this dialog and select one from the "
"dropdown list. </p> Available sizes are most standard paper sizes supported "
"by your printer. Your printer's supported paper sizes are read from the "
"printer driver info (as laid down in the <em>'PPD'</em>, the printer "
"description file). <em>Be aware that the 'Paper Size' selected may not be "
"supported by 'poster' (example: 'HalfLetter') while it may well be "
"supported by your printer.</em> If you hit that obstacle, simply use "
"another, supported Paper Size, like 'A4' or 'Letter'. <p><b>Notice</b>, how "
"the little preview window below changes with your change of paper size. It "
"indicates how many tiles need to be printed to make up the poster, given "
"the selected paper and poster size.</p> <p><b>Hint:</b> The little preview "
"window below is not just a passive icon. You can click on its individual "
"tiles to select them for printing. To select multiple tiles to be printed "
"at once, you need to <em>'shift-click'</em> on the tiles ('shift-click' "
"means: hold down the [SHIFT]-key on your keyboard and click with the mouse "
"while [SHIFT]-key is held.) The order of your clicking is significant to "
"the order of printing the different tiles. The order of your selection (and "
"for the printed tiles) is indicated by the contents of the text field "
"labelled as <em>'Tile pages (to be printed):'</em><p> <b>Note:</b> By "
"default no tile is selected. Before you can print (a part of) your poster, "
"you must select at least one tile. </p> </qt>"
msgstr ""
#: kpposterpage.cpp:126
msgid ""
" <qt> <b>Cut Margin selection</b> <p>Slider and spinbox let you determine "
"a <em>'cut margin'</em> which will be printed onto each tile of your poster "
"to help you cut the pieces as needed. </p> <p><b>Notice</b>, how the little "
"preview window above changes with your change of cut margins. It indicates "
"to you how much space the cut margins will take away from each tile. "
"<p><b>Be aware</b>, that your cut margins need to be equal to or greater "
"than the margins your printer uses. The printer's capabilities are "
"described in the <em>'ImageableArea'</em> keywords of its driver PPD file. "
"</p> </qt>"
msgstr ""
#: kpposterpage.cpp:137
msgid ""
" <qt> <b>Order and number of tile pages to be printed</b> <p>This field "
"displays and sets the individual tiles to be printed, as well as the order "
"for their printout. </p> You can file the field with 2 different methods: "
"<ul> <li>Either use the interactive thumbnail preview above and '[SHIFT]-"
"click' on the tiles. </li> <li>Or edit this text field accordingly. </li> "
"</ul> <p>When editing the field, you can use a '3-7' syntax instead of a "
"'3,4,5,6,7' one. </p> <p><b>Examples:</b></p> <pre> \"2,3,7,9,3\" "
"<br> \"1-3,6,8-11\" </qt>"
msgstr ""
#: kpposterpage.cpp:154
msgid "Poster"
msgstr "Плакат"
#: kpposterpage.cpp:156
msgid "&Print poster"
msgstr "&Плакатни босиб чиқариш"
#: kpposterpage.cpp:170
msgid "Poste&r size:"
msgstr "&Плакатнинг ўлчами:"
#: kpposterpage.cpp:172
msgid "Media size:"
msgstr "Варақнинг ўлчами:"
#: kpposterpage.cpp:174
msgid "Pri&nt size:"
msgstr "Босиб чиқа&риш ўлчами:"
#: kpposterpage.cpp:181
#, no-c-format
msgid "C&ut margin (% of media):"
msgstr "Бўш &жойни кесиш (варақнинг %):"
#: kpposterpage.cpp:185
msgid "&Tile pages (to be printed):"
msgstr "&Бош варақлар (босиб чиқаришга):"
#: kpposterpage.cpp:192
msgid "Link/unlink poster and print size"
msgstr ""
#: kpposterpage.cpp:257
msgid "Unknown"
msgstr "Номаълум"
#: kpqtpage.cpp:70
msgid ""
" <qt> <b>Selection of color mode:</b> You can choose between 2 options: "
"<ul><li><b>Color</b> and</li> <li><b>Grayscale</b></li></ul> <b>Note:</b> "
"This selection field may be grayed out and made inactive. This happens if "
"TDEPrint can not retrieve enough information about your print file. In this "
"case the embedded color- or grayscale information of your printfile, and "
"the default handling of the printer take precedence. </qt>"
msgstr ""
#: kpqtpage.cpp:79
msgid ""
" <qt> <b>Selection of page size:</b> Select paper size to be printed on "
"from the drop-down menu. <p>The exact list of choices depends on the "
"printer driver (\"PPD\") you have installed. </qt>"
msgstr ""
#: kpqtpage.cpp:84
msgid ""
" <qt> <b>Selection of pages per sheet:</b> You can choose to print more "
"than one page onto each sheet of paper. This is sometimes useful to save "
"paper. <p><b>Note 1:</b> the page images get scaled down accordingly to "
"print 2 or 4 pages per sheet. The page image does not get scaled if you "
"print 1 page per sheet (the default setting.). <p><b>Note 2:</b> If you "
"select multiple pages per sheet here, the scaling and re-arranging is done "
"by your printing system. <p><b>Note 3, regarding \"Other\":</b> You cannot "
"really select <em>Other</em> as the number of pages to print on one sheet."
"\"Other\" is checkmarked here for information purposes only. <p>To select "
"8, 9, 16 or other numbers of pages per sheet: <ul> <li> go to the tab "
"headlined \"Filter\"</li> <li> enable the <em>Multiple Pages per Sheet</em> "
"filter </li> <li> and configure it (bottom-most button on the right of the "
"\"Filters\" tab). </li> </ul> </qt>"
msgstr ""
#: kpqtpage.cpp:102
msgid ""
" <qt> <b>Selection of image orientation:</b> Orientation of the printed "
"pageimage on your paper is controlled by the radio buttons. By default, the "
"orientation is <em>Portrait</em> <p>You can select 2 alternatives: <ul> "
"<li> <b>Portrait.</b>.Portrait is the default setting. </li> <li> "
"<b>Landscape.</b> </li> </ul> The icon changes according to your "
"selection. </qt>"
msgstr ""
#: kpqtpage.cpp:113
msgid "Print Format"
msgstr "Босиб чиқариш формати"
#: kpqtpage.cpp:123
msgid "Color Mode"
msgstr "Ранг усули"
#: kpqtpage.cpp:135
msgid "Colo&r"
msgstr "&Ранг"
#: kpqtpage.cpp:138
msgid "&Grayscale"
msgstr "&Оқ-қора"
#: kpqtpage.cpp:151
msgid "Ot&her"
msgstr "Б&ошқа"
#: kprintaction.cpp:117 kprintaction.cpp:122 kprintaction.cpp:127
msgid "&Export..."
msgstr "&Экспорт қилиш"
#: kprintdialog.cpp:97
msgid ""
" <qt><b>Printer Location:</b> The <em>Location</em> may describe where the "
"selected printer is located. The Location description is created by the "
"administrator of the print system (or may be left empty). </qt>"
msgstr ""
#: kprintdialog.cpp:102
msgid ""
" <qt><b>Printer Type:</b> The <em>Type</em> indicates your printer type. </"
"qt>"
msgstr ""
#: kprintdialog.cpp:104
msgid ""
" <qt><b>Printer State:</b> The <em>State</em> indicates the state of the "
"print queue on the print server (which could be your localhost). The state "
"may be 'Idle', 'Processing', 'Stopped', 'Paused' or similar. </qt>"
msgstr ""
#: kprintdialog.cpp:108
msgid ""
" <qt><b>Printer Comment:</b> The <em>Comment</em> may describe the selected "
"printer. This comment is created by the administrator of the print system "
"(or may be left empty). </qt>"
msgstr ""
#: kprintdialog.cpp:112
msgid ""
" <qt><b>Printer Selection Menu:</b> <p>Use this combo box to select the "
"printer to which you want to print. Initially (if you run TDEPrint for the "
"first time), you may only find the <em>TDE special printers</em> (which "
"save jobs to disk [as PostScript- or PDF-files], or deliver jobs via email "
"(as a PDF attachment). If you are missing a real printer, you need to... "
"<ul> <li>...either create a local printer with the help of the <em>TDE Add "
"Printer Wizard</em>. The Wizard is available for the CUPS and RLPR printing "
"systems (click button to the left of the <em>'Properties'</em> button),</li> "
"<li>...or try to connect to an existing remote CUPS print server. You can "
"connect by clicking the <em>'System Options'</em> button below. A new dialog "
"opens: click on the <em>'CUPS server'</em> icon: Fill in the information "
"required to use the remote server. </li> </ul> <p><b>Note:</b> It may "
"happen that you successfully connected to a remote CUPS server and still do "
"not get a printer list. If this happens: force TDEPrint to re-load its "
"configuration files. To reload the configuration files, either start "
"kprinter again, or use the switch the print system away from CUPS and back "
"again once. The print system switch can be made through a selection in the "
"drop-down menu at bottom of this dialog when fully expanded). </p> </qt>"
msgstr ""
#: kprintdialog.cpp:137
msgid ""
" <qt><b>Print Job Properties:</b> <p>This button opens a dialog where you "
"can make decisions regarding all supported print job options. </qt>"
msgstr ""
#: kprintdialog.cpp:141
msgid ""
" <qt><b>Selective View on List of Printers:</b> <p> This button reduces the "
"list of visible printers to a shorter, more convenient, pre-defined list.</"
"p> <p>This is particularly useful in enterprise environments with lots of "
"printers. The default is to show <b>all</b> printers.</p> <p>To create a "
"personal <em>'selective view list'</em>, click on the <em>'System Options'</"
"em> button at the bottom of this dialog. Then, in the new dialog, select "
"<em>'Filter'</em> (left column in the <em>TDE Print Configuration</em> "
"dialog) and setup your selection..</p> <p><b>Warning:</b> Clicking this "
"button without prior creation of a personal <em>'selective view list'</em> "
"will make all printers dissappear from the view. (To re-enable all "
"printers, just click this button again.) </p> </qt>"
msgstr ""
#: kprintdialog.cpp:154
msgid ""
"<qt><b>TDE Add Printer Wizard</b> <p>This button starts the <em>TDE Add "
"Printer Wizard</em>.</p> <p>Use the Wizard (with <em>\"CUPS\"</em> or <em>"
"\"RLPR\"</em>) to add locally defined printers to your system. </p> "
"<p><b>Note:</b> The <em>TDE Add Printer Wizard</em> does <b>not</b> work, "
"and this button is disabled if you use <em>\"Generic LPD</em>\", <em>\"LPRng"
"\"</em>, or <em>\"Print Through an External Program</em>\".) </p> </qt>"
msgstr ""
#: kprintdialog.cpp:163
msgid ""
" <qt><b>External Print Command</b> <p>Here you can enter any command that "
"would also print for you in a <em>konsole</em> window. </p> <b>Example:</b> "
"<pre>a2ps -P &lt;printername&gt; --medium=A3</pre>. </qt>"
msgstr ""
#: kprintdialog.cpp:168
msgid ""
" <qt><b>Additional Print Job Options</b> <p>This button shows or hides "
"additional printing options.</qt>"
msgstr ""
#: kprintdialog.cpp:170
msgid ""
" <qt><b>System Options:</b> <p>This button starts a new dialog where you "
"can adjust various settings of your printing system. Amongst them: <ul><li> "
"Should \tDE applications embed all fonts into the PostScript they generate "
"for printing? <li> Should TDE use an external PostScript viewer like <em>gv</"
"em> for print page previews? <li> Should TDEPrint use a local or a remote "
"CUPS server?, </ul> and many more.... </qt>"
msgstr ""
#: kprintdialog.cpp:182
msgid ""
" <qt><b>Help:</b> This button takes you to the complete <em>TDEPrint Manual</"
"em>. </qt>"
msgstr ""
#: kprintdialog.cpp:186
msgid ""
" <qt><b>Cancel:</b> This button cancels your print job and quits the "
"kprinter dialog. </qt>"
msgstr ""
#: kprintdialog.cpp:190
msgid ""
" <qt><b>Print:</b> This button sends the job to the printing process. If you "
"are sending non-PostScript files, you may be asked if you want TDE to "
"convert the files into PostScript, or if you want your print subsystem (like "
"CUPS) to do this. </qt>"
msgstr ""
#: kprintdialog.cpp:196
msgid ""
" <qt><b>Keep Printing Dialog Open</b><p>If you enable this checkbox, the "
"printing dialog stays open after you hit the <em>Print</em> button.</p> <p> "
"This is especially useful, if you need to test various print settings (like "
"color matching for an inkjet printer) or if you want to send your job to "
"multiple printers (one after the other) to have it finished more quickly.</"
"p> </qt>"
msgstr ""
#: kprintdialog.cpp:206
msgid ""
" <qt><b>Output File Name and Path:</b> The \"Output file:\" shows you where "
"your file will be saved if you decide to \"Print to File\" your job, using "
"one of the TDE <em>Special Printers</em> named \"Print to File "
"(PostScript)\" or \"Print to File (PDF)\". Choose a name and location that "
"suits your need by using the button and/or editing the line on the right. </"
"qt>"
msgstr ""
#: kprintdialog.cpp:214
msgid ""
" <qt><b>Output File Name and Path:</b> Edit this line to create a path and "
"filename that suits your needs. (Button and Lineedit field are only "
"available if you \"Print to File\") </qt>"
msgstr ""
#: kprintdialog.cpp:219
msgid ""
" <qt><b>Browse Directories button:<b> This button calls the \"File Open / "
"Browsed Directories\" dialog to let you choose a directory and file name "
"where your \"Print-to-File\" job should be saved. </qt>"
msgstr ""
#: kprintdialog.cpp:225
msgid ""
" <qt><b>Add File to Job</b> <p>This button calls the \"File Open / Browse "
"Directories\" dialog to allow you to select a file for printing. Note, that "
"<ul><li>you can select ASCII or International Text, PDF, PostScript, JPEG, "
"TIFF, PNG, GIF and many other graphical formats. <li>you can select various "
"files from different paths and send them as one \"multi-file job\" to the "
"printing system. </ul> </qt>"
msgstr ""
#: kprintdialog.cpp:237
msgid ""
" <qt><b>Print Preview</b> Enable this checkbox if you want to see a preview "
"of your printout. A preview lets you check if, for instance, your intended "
"\"poster\" or \"pamphlet\" layout looks like you expected, without wasting "
"paper first. It also lets you cancel the job if something looks wrong. "
"<p><b>Note:</b> The preview feature (and therefore this checkbox) is only "
"visible for printjobs created from inside TDE applications. If you start "
"kprinter from the commandline, or if you use kprinter as a print command "
"for non-TDE applications (like Acrobat Reader, Firefox or OpenOffice), "
"print preview is not available here. </qt>"
msgstr ""
#: kprintdialog.cpp:250
msgid ""
" <qt><b>Set as Default Printer</b> This button sets the current printer as "
"the user's default. <p><b>Note:</b> (Button is only visible if the checkbox "
"for <em>System Options</em> --> <em>General</em> --> <em>Miscellaneous</"
"em>: <em>\"Defaults to the last printer used in the application\"</em> is "
"disabled.) </qt>"
msgstr ""
#: kprintdialog.cpp:265 management/kmmainview.cpp:289 management/kmwend.cpp:90
#: management/smbview.cpp:43
msgid "Printer"
msgstr "Принтер"
#: kprintdialog.cpp:278 management/kmspecialprinterdlg.cpp:56
#: management/kxmlcommanddlg.cpp:114
msgid "&Name:"
msgstr "&Номи:"
#: kprintdialog.cpp:280 management/kminfopage.cpp:50
msgid ""
"_: Status\n"
"State:"
msgstr "Ҳолати:"
#: kprintdialog.cpp:282 management/kminfopage.cpp:48
msgid "Type:"
msgstr "Тури:"
#: kprintdialog.cpp:284 management/kmwname.cpp:40
msgid "Location:"
msgstr "Манзили:"
#: kprintdialog.cpp:286 management/kxmlcommanddlg.cpp:176
msgid "Comment:"
msgstr "Изоҳ:"
#: kprintdialog.cpp:289
msgid "P&roperties"
msgstr "&Хоссалари"
#: kprintdialog.cpp:291
msgid "System Op&tions"
msgstr "Тизимнинг &параметрлари"
#: kprintdialog.cpp:293
msgid "Set as &Default"
msgstr "&Андоза деб белгилаш"
#: kprintdialog.cpp:300
msgid "Toggle selective view on printer list"
msgstr ""
#: kprintdialog.cpp:305
msgid "Add printer..."
msgstr "Принтерни қўшиш"
#: kprintdialog.cpp:313
msgid "Previe&w"
msgstr "&Кўриб чиқиш"
#: kprintdialog.cpp:315
msgid "O&utput file:"
msgstr "На&тижа файли:"
#: kprintdialog.cpp:321
msgid "Print co&mmand:"
msgstr "Босиб чиқариш &буйруғи:"
#: kprintdialog.cpp:330
msgid "Show/hide advanced options"
msgstr "Қўшимча параметрларни кўсатиш/бекитиш"
#: kprintdialog.cpp:332
msgid "&Keep this dialog open after printing"
msgstr "Босиб чиқариш тугагач бу ойнани &очиқ қолдириш"
#: kprintdialog.cpp:551 kprintdialog.cpp:939
msgid "An error occurred while retrieving the printer list:"
msgstr "Принтерлар рўйхатини аниқлашда хато рўй берди:"
#: kprintdialog.cpp:715
msgid "The output filename is empty."
msgstr "Натижа файлининг номи кўрсатилмаган."
#: kprintdialog.cpp:754
msgid "You don't have write permissions to this file."
msgstr "Бу файлга ёзиш учун сизга рухсат йўқ."
#: kprintdialog.cpp:760
msgid "The output directory does not exist."
msgstr ""
#: kprintdialog.cpp:762
msgid "You don't have write permissions in that directory."
msgstr ""
#: kprintdialog.cpp:874
msgid "&Options <<"
msgstr "&Параметрлар <<"
#: kprintdialog.cpp:887
msgid "&Options >>"
msgstr "&Параметрлар >>"
#: kprintdialog.cpp:929
msgid "Initializing printing system..."
msgstr "Босиб чиқариш тизими ишга тайёрланмоқда..."
#: kprintdialog.cpp:965
msgid "Print to File"
msgstr "Фалй сифатида сақлаш"
#: kprinter.cpp:280
msgid "Initialization..."
msgstr "Ишга туширилмоқда..."
#: kprinter.cpp:283 kprinter.cpp:915
#, c-format
msgid "Generating print data: page %1"
msgstr "Босиб чиқариш учун маълумот яратилмоқда: бет %1"
#: kprinter.cpp:429
msgid "Previewing..."
msgstr "Кўриб чиқилмоқда"
#: kprinter.cpp:696 tdeprintd.cpp:158
#, c-format
msgid ""
"<p><nobr>A print error occurred. Error message received from system:</nobr></"
"p><br>%1"
msgstr ""
"<p><nobr>Босиб чиқаришда хато рўй берди. Тизимдан олинган хато ҳақида хабар:"
"</nobr></p><br>%1"
#: kprinterimpl.cpp:156
msgid "Cannot copy multiple files into one file."
msgstr "Бир нечта файллардан битта файлга нусха олиб бўлмайди."
#: kprinterimpl.cpp:165
msgid "Cannot save print file to %1. Check that you have write access to it."
msgstr ""
"%1 файлига сақлаб бўлмайди. Унга ёзишга сизда рухсат борлигини текширинг."
#: kprinterimpl.cpp:233
#, c-format
msgid "Printing document: %1"
msgstr "Хужжат босиб чиқарилмоқда: %1"
#: kprinterimpl.cpp:251
#, c-format
msgid "Sending print data to printer: %1"
msgstr "Босиб чиқариш учун маълумот принтерга юборилмоқда: %1"
#: kprinterimpl.cpp:279
msgid "Unable to start child print process. "
msgstr ""
#: kprinterimpl.cpp:281
msgid ""
"The TDE print server (<b>tdeprintd</b>) could not be contacted. Check that "
"this server is running."
msgstr ""
"TDE босиб чиқариш серверига (<b>tdeprintd</b>) уланиб бўлмади. Бу сервер "
"ишга туширилганлигини текширинг."
#: kprinterimpl.cpp:283
msgid ""
"_: 1 is the command that <files> is given to\n"
"Check the command syntax:\n"
"%1 <files>"
msgstr ""
#: kprinterimpl.cpp:290
msgid "No valid file was found for printing. Operation aborted."
msgstr "Босиб чиқариш учун тўғри файл топилмади. Амал тўхтатилди."
#: kprinterimpl.cpp:325
msgid ""
"<p>Unable to perform the requested page selection. The filter <b>psselect</"
"b> cannot be inserted in the current filter chain. See <b>Filter</b> tab in "
"the printer properties dialog for further information.</p>"
msgstr ""
#: kprinterimpl.cpp:355
msgid "<p>Could not load filter description for <b>%1</b>.</p>"
msgstr "<p><b>%1</b> учун филтер таърифини юклаб бўлмади.</p>"
#: kprinterimpl.cpp:371
msgid ""
"<p>Error while reading filter description for <b>%1</b>. Empty command line "
"received.</p>"
msgstr ""
"<p><b>%1</b> учун филтер таърифини ўқишда хато рўй берди. Бажариш учун "
"буйруқ аниқланмаган.</p>"
#: kprinterimpl.cpp:385
msgid ""
"The MIME type %1 is not supported as input of the filter chain (this may "
"happen with non-CUPS spoolers when performing page selection on a non-"
"PostScript file). Do you want TDE to convert the file to a supported format?"
"</p>"
msgstr ""
#: kprinterimpl.cpp:389 kprinterimpl.cpp:509
msgid "Convert"
msgstr "Айлантириш"
#: kprinterimpl.cpp:399
msgid "Select MIME Type"
msgstr "MIME турини танлаш"
#: kprinterimpl.cpp:400
msgid "Select the target format for the conversion:"
msgstr "Айлантириш учун натижа турини танланг:"
#: kprinterimpl.cpp:404 kprinterimpl.cpp:430
msgid "Operation aborted."
msgstr "Амал тўхтатилди."
#: kprinterimpl.cpp:410
msgid "No appropriate filter found. Select another target format."
msgstr "Тўғри келадиган филтер топилмади. Бошқа натижа турини танланг."
#: kprinterimpl.cpp:423
msgid ""
"<qt>Operation failed with message:<br>%1<br>Select another target format.</"
"qt>"
msgstr ""
"<qt>Амал қуйидаги хабар билан муваффақиятсиз тугади:<br>%1<br>Бошқа натижа "
"турини танланг.</qt>"
#: kprinterimpl.cpp:441
msgid "Filtering print data"
msgstr "Босиб чиқариш маълумоти филтердан ўтказилмоқда"
#: kprinterimpl.cpp:445
msgid "Error while filtering. Command was: <b>%1</b>."
msgstr "Филтерлашда хато рўй берди. Буйруқ қуйидагича эди: <b>%1</b>."
#: kprinterimpl.cpp:487
msgid "<qt>The print file is empty and will be ignored:<p>%1</p></qt>"
msgstr ""
#: kprinterimpl.cpp:497
msgid ""
"<qt>The file format <em> %1 </em> is not directly supported by the current "
"print system. You now have 3 options: <ul> <li> TDE can attempt to convert "
"this file automatically to a supported format. (Select <em>Convert</em>) </"
"li><li> You can try to send the file to the printer without any conversion. "
"(Select <em>Keep</em>) </li><li> You can cancel the printjob. (Select "
"<em>Cancel</em>) </li></ul> Do you want TDE to attempt and convert this file "
"to %2?</qt>"
msgstr ""
#: kprinterimpl.cpp:510 management/kmwname.cpp:62
msgid "Keep"
msgstr "Шундай қолдириш"
#: kprinterimpl.cpp:518
msgid ""
"<qt>No appropriate filter was found to convert the file format %1 into %2."
"<br><ul><li>Go to <i>System Options -> Commands</i> to look through the list "
"of possible filters. Each filter executes an external program.</li><li> See "
"if the required external program is available.on your system.</li></ul></qt>"
msgstr ""
#: kprinterpropertydialog.cpp:78 kprinterpropertydialog.cpp:138
msgid "Printer Configuration"
msgstr "Принтерни мослаш"
#: kprinterpropertydialog.cpp:138
msgid "No configurable options for that printer."
msgstr "Бу принтер учун мосланадиган параметрлар йўқ."
#: kprintpreview.cpp:140
msgid "Do you want to continue printing anyway?"
msgstr "Сиз бунга қамасдан босиб чиқаришни давом этишни истайсизми?"
#: kprintpreview.cpp:148 kprintpreview.cpp:227
msgid "Print Preview"
msgstr "Кўриб чиқиш"
#: kprintpreview.cpp:278
msgid ""
"The preview program %1 cannot be found. Check that the program is correctly "
"installed and located in a directory included in your PATH environment "
"variable."
msgstr ""
"Кўриб чиқиш дастури (%1) топилмади. Дастур тўғри ўрнатилганлигини ва у "
"жойлашган директория сизнинг $PATH муҳит ўзгарувчингизда кўрсатилганлигини "
"текширинг."
#: kprintpreview.cpp:303
msgid ""
"Preview failed: neither the internal TDE PostScript viewer (KGhostView) nor "
"any other external PostScript viewer could be found."
msgstr ""
"Кўриб чиқиш муваффақиятсиз тугади. На TDE PostScript кўрувчи (KGhostView), "
"на ташқи PostScript кўрувчи топилмади."
#: kprintpreview.cpp:307
#, c-format
msgid ""
"Preview failed: TDE could not find any application to preview files of type "
"%1."
msgstr ""
"Кўриб чиқиш муваффақиятсиз тугади. TDE %1 турли файлларни кўриб чиқадиган "
"дастурни тополмади."
#: kprintpreview.cpp:317
#, c-format
msgid "Preview failed: unable to start program %1."
msgstr "Кўриб чиқиш муваффақиятсиз тугади: %1 дастурини ишга тушириб бўлмади."
#: kprintpreview.cpp:322
msgid "Do you want to continue printing?"
msgstr "Босиб чиқаришни давом этишни истайсизми?"
#: kprintprocess.cpp:75
msgid "File transfer failed."
msgstr ""
#: kprintprocess.cpp:81
msgid "Abnormal process termination (<b>%1</b>)."
msgstr ""
#: kprintprocess.cpp:83
msgid "<b>%1</b>: execution failed with message:<p>%2</p>"
msgstr ""
"<b>%1</b>: бажариш қуйидаги хабар билан муваффақиятсиз тугади:<p>%2</p>"
#: kxmlcommand.cpp:789
msgid "One of the command object's requirements is not met."
msgstr ""
#: kxmlcommand.cpp:797 kxmlcommand.cpp:802
#, c-format
msgid "The command does not contain the required tag %1."
msgstr "Буйруқда керакли %1 тэг йўқ."
#: lpd/klpdprinterimpl.cpp:46 rlpr/krlprprinterimpl.cpp:53
msgid ""
"The <b>%1</b> executable could not be found in your path. Check your "
"installation."
msgstr ""
"Буйруқ (<b>%1</b>) сизнинг $PATH муҳит ўзгарувчингизда кўрсатилган "
"директориялар ичида топилмади."
#: lpd/kmlpdmanager.cpp:87
msgid "Local printer queue (%1)"
msgstr "Локал принтернинг навбати (%1)"
#: lpd/kmlpdmanager.cpp:87
msgid ""
"_: Unknown type of local printer queue\n"
"Unknown"
msgstr "Номаълум"
#: lpd/kmlpdmanager.cpp:88
msgid "<Not available>"
msgstr ""
#: lpd/kmlpdmanager.cpp:89
msgid ""
"_: Unknown Driver\n"
"Unknown"
msgstr "Номаълум"
#: lpd/kmlpdmanager.cpp:95
msgid "Remote LPD queue %1@%2"
msgstr "Масофадаги LPD навбати %1@%2"
#: lpd/kmlpdmanager.cpp:158
msgid "Unable to create spool directory %1 for printer %2."
msgstr "%1 принтери учун %2 спул директориясини ятиб бўлмади."
#: lpd/kmlpdmanager.cpp:165
msgid "Unable to save information for printer <b>%1</b>."
msgstr "<b>%1</b> принтери ҳақида маълумотни сақлаб бўлмади."
#: lpd/kmlpdmanager.cpp:193
msgid ""
"Unable to set correct permissions on spool directory %1 for printer <b>%2</"
"b>."
msgstr ""
#: lpd/kmlpdmanager.cpp:237
msgid "Permission denied: you must be root."
msgstr "Рухсат йўқ: сиз root бўлишингиз шарт."
#: lpd/kmlpdmanager.cpp:244
msgid "Unable to execute command \"%1\"."
msgstr "\"%1\" буйруғини бажариб бўлмади."
#: lpd/kmlpdmanager.cpp:317
msgid "Unable to write printcap file."
msgstr "printcap файлини ёзиб бўлмади."
#: lpd/kmlpdmanager.cpp:372
msgid "Couldn't find driver <b>%1</b> in printtool database."
msgstr ""
#: lpd/kmlpdmanager.cpp:411
msgid "Couldn't find printer <b>%1</b> in printcap file."
msgstr "printcap файлида <b>%1</b> принтерни топиб бўлмади."
#: lpd/kmlpdmanager.cpp:440
msgid "No driver found (raw printer)"
msgstr ""
#: lpd/kmlpdmanager.cpp:442
msgid "Printer type not recognized."
msgstr "Принтернинг тури аниқланмади."
#: lpd/kmlpdmanager.cpp:452
msgid ""
"The driver device <b>%1</b> is not compiled in your GhostScript "
"distribution. Check your installation or use another driver."
msgstr ""
#: lpd/kmlpdmanager.cpp:560
msgid "Unable to write driver associated files in spool directory."
msgstr ""
#: lpd/kmlpduimanager.cpp:44
msgid "Local printer (parallel, serial, USB)"
msgstr "Локал принтер (параллел, кетма-кет, USB)"
#: lpd/kmlpduimanager.cpp:45 management/kmpropbackend.cpp:68
#: rlpr/kmwrlpr.cpp:116
msgid "Remote LPD queue"
msgstr "Масофадаги LPD навбати"
#: lpd/kmlpduimanager.cpp:46
msgid "SMB shared printer (Windows)"
msgstr ""
#: lpd/kmlpduimanager.cpp:47
msgid "Network printer (TCP)"
msgstr "Тармоқдаги принтер (TCP)"
#: lpd/kmlpduimanager.cpp:48
msgid "File printer (print to file)"
msgstr "Файл принтер (файл сифатида сақлаш)"
#: lpd/lpdtools.cpp:31
msgid "A4"
msgstr "A4"
#: lpd/lpdtools.cpp:32
msgid "A3"
msgstr "A3"
#: lpd/lpdtools.cpp:33
msgid "B4"
msgstr "B4"
#: lpd/lpdtools.cpp:34
msgid "B5"
msgstr "B5"
#: lpd/lpdtools.cpp:233
msgid "GhostScript settings"
msgstr "GhostScript мосламалари"
#: lpd/lpdtools.cpp:239 management/kmpropdriver.cpp:53
#: management/kmwend.cpp:104
msgid "Driver"
msgstr "Драйвер"
#: lpd/lpdtools.cpp:254
msgid "Resolution"
msgstr "Ўлчам"
#: lpd/lpdtools.cpp:277
msgid "Color depth"
msgstr ""
#: lpd/lpdtools.cpp:301
msgid "Additional GS options"
msgstr "Қўшимча GS параметрлари"
#: lpd/lpdtools.cpp:313
msgid "Page size"
msgstr "Бетнинг ўлчами"
#: lpd/lpdtools.cpp:329
msgid "Pages per sheet"
msgstr "Варақга бет сони"
#: lpd/lpdtools.cpp:345
msgid "Left/right margin (1/72 in)"
msgstr "Чапдан/ўнгдан бўш жой (1/72 дм)"
#: lpd/lpdtools.cpp:350
msgid "Top/bottom margin (1/72 in)"
msgstr "Юқоридан/пастдан бўш жой (1/72 дм)"
#: lpd/lpdtools.cpp:356
msgid "Text options"
msgstr "Матн параметрлари"
#: lpd/lpdtools.cpp:362
msgid "Send EOF after job to eject page"
msgstr ""
#: lpd/lpdtools.cpp:370
msgid "Fix stair-stepping text"
msgstr ""
#: lpd/lpdtools.cpp:382
msgid "Fast text printing (non-PS printers only)"
msgstr "Матнни тез босиб чиқариш (фақат PS эмас принтерлар)"
#: lpdunix/kmlpdunixmanager.cpp:210
msgid "Description unavailable"
msgstr "Таъриф мавжуд эмас"
#: lpdunix/kmlpdunixmanager.cpp:220 lpdunix/kmlpdunixmanager.cpp:271
#: lpdunix/kmlpdunixmanager.cpp:318 lpdunix/kmlpdunixmanager.cpp:380
#, c-format
msgid "Remote printer queue on %1"
msgstr "%1'даги принтернинг навбати"
#: lpdunix/kmlpdunixmanager.cpp:222 lpdunix/kmlpdunixmanager.cpp:274
#: lpdunix/kmlpdunixmanager.cpp:320 lpdunix/kmlpdunixmanager.cpp:342
#: lpdunix/kmlpdunixmanager.cpp:382 management/kminfopage.cpp:118
msgid "Local printer"
msgstr "Локал принтер"
#: lpr/apshandler.cpp:68
msgid "APS Driver (%1)"
msgstr "APS драйвери (%1)"
#: lpr/apshandler.cpp:112 lpr/lprhandler.cpp:74 lpr/lprngtoolhandler.cpp:72
msgid "Network printer (%1)"
msgstr "Тармоқдаги принтер (%1)"
#: lpr/apshandler.cpp:215 lpr/lprhandler.cpp:127 lpr/lprngtoolhandler.cpp:276
#: lpr/matichandler.cpp:421
#, c-format
msgid "Unsupported backend: %1."
msgstr ""
#: lpr/apshandler.cpp:221
#, c-format
msgid "Unable to create directory %1."
msgstr "%1 директорияни яратиб бўлмади."
#: lpr/apshandler.cpp:241
#, c-format
msgid "Missing element: %1."
msgstr "Элемент етишмаяпти: %1."
#: lpr/apshandler.cpp:258 lpr/apshandler.cpp:289 lpr/lprngtoolhandler.cpp:323
#, c-format
msgid "Invalid printer backend specification: %1"
msgstr ""
#: lpr/apshandler.cpp:264 lpr/apshandler.cpp:295 lpr/apshandler.cpp:367
#, c-format
msgid "Unable to create the file %1."
msgstr "%1 файлни яратиб бўлмади."
#: lpr/apshandler.cpp:322
msgid "The APS driver is not defined."
msgstr "APS драйвери аниқланманган."
#: lpr/apshandler.cpp:380
#, c-format
msgid "Unable to remove directory %1."
msgstr "Директорияни (%1) ўчириб бўлмади."
#: lpr/editentrydialog.cpp:40
msgid "Aliases:"
msgstr ""
#: lpr/editentrydialog.cpp:46 management/kxmlcommanddlg.cpp:107
msgid "String"
msgstr ""
#: lpr/editentrydialog.cpp:47
msgid "Number"
msgstr "Сон"
#: lpr/editentrydialog.cpp:48 management/kxmlcommanddlg.cpp:111
msgid "Boolean"
msgstr ""
#: lpr/editentrydialog.cpp:72
#, c-format
msgid "Printcap Entry: %1"
msgstr "Printcap файлининг ёзуви: %1"
#: lpr/kmconfiglpr.cpp:33 lpr/kmconfiglpr.cpp:37
msgid "Spooler"
msgstr "Спулер"
#: lpr/kmconfiglpr.cpp:34
msgid "Spooler Settings"
msgstr "Спулернинг мосламалари"
#: lpr/kmlprjobmanager.cpp:83
msgid "Unsupported operation."
msgstr "Қўлланмаган амал."
#: lpr/kmlprmanager.cpp:289
msgid "The printcap file is a remote file (NIS). It cannot be written."
msgstr ""
#: lpr/kmlprmanager.cpp:305
msgid ""
"Unable to save printcap file. Check that you have write permissions for that "
"file."
msgstr ""
"printcap файлини сақлаб бўлмади. Бу файл учун сизда ёзиш ҳуқуқлари борлигини "
"текширинг."
#: lpr/kmlprmanager.cpp:330
msgid "Internal error: no handler defined."
msgstr ""
#: lpr/kmlprmanager.cpp:344
msgid "Couldn't determine spool directory. See options dialog."
msgstr ""
#: lpr/kmlprmanager.cpp:350
msgid ""
"Unable to create the spool directory %1. Check that you have the required "
"permissions for that operation."
msgstr ""
"Спул директориясини (%1) яратиб бўлмади. Бу амални бажариш учун сизда етарли "
"ҳуқуқлар борлигини текширинг."
#: lpr/kmlprmanager.cpp:382
#, c-format
msgid ""
"The printer has been created but the print daemon could not be restarted. %1"
msgstr ""
#: lpr/kmlprmanager.cpp:410
msgid ""
"Unable to remove spool directory %1. Check that you have write permissions "
"for that directory."
msgstr ""
#: lpr/kmlprmanager.cpp:458
msgid "&Edit printcap Entry..."
msgstr ""
#: lpr/kmlprmanager.cpp:473
msgid ""
"Editing a printcap entry manually should only be done by confirmed system "
"administrator. This may prevent your printer from working. Do you want to "
"continue?"
msgstr ""
#: lpr/kmlprmanager.cpp:489
#, c-format
msgid "Spooler type: %1"
msgstr "Спулернинг тури: %1"
#: lpr/lpchelper.cpp:235 lpr/lpchelper.cpp:273 lpr/lpchelper.cpp:291
#: lpr/lpchelper.cpp:314
msgid "The executable %1 couldn't be found in your PATH."
msgstr ""
"Буйруқ (%1) сизнинг $PATH муҳит ўзгарувчингизда кўрсатилган директорияларда "
"топилмади."
#: lpr/lpchelper.cpp:256 lpr/lpchelper.cpp:280 lpr/lpchelper.cpp:298
msgid "Permission denied."
msgstr "Рухсат йўқ."
#: lpr/lpchelper.cpp:259
msgid "Printer %1 does not exist."
msgstr "Принтер %1 мавжуд эмас."
#: lpr/lpchelper.cpp:263
#, c-format
msgid "Unknown error: %1"
msgstr "Номаълум хато: %1"
#: lpr/lpchelper.cpp:282
#, c-format
msgid "Execution of lprm failed: %1"
msgstr "lprm буйруғини ишга тушириш муваффақиятсиз тугади: %1"
#: lpr/lprhandler.cpp:59 lpr/lprhandler.cpp:97
msgid "Unknown (unrecognized entry)"
msgstr "Номаълум (нотаниш ёзув)"
#: lpr/lprhandler.cpp:67 lpr/lprhandler.cpp:91
msgid "Remote queue (%1) on %2"
msgstr "Масофадаги компьютерда (%2) жойлашган навбатнинг номи %1"
#: lpr/lprhandler.cpp:81 lpr/matichandler.cpp:86
#, c-format
msgid "Local printer on %1"
msgstr "Компьютердаги (%1) локал принтер"
#: lpr/lprhandler.cpp:104 lpr/lprhandler.cpp:110 lpr/lprhandler.cpp:116
msgid "Unrecognized entry."
msgstr "Нотаниш ёзув."
#: lpr/lprngtoolhandler.cpp:99
msgid "IFHP Driver (%1)"
msgstr "IFHP драйвери (%1)"
#: lpr/lprngtoolhandler.cpp:99 lpr/lprngtoolhandler.cpp:170
msgid "unknown"
msgstr "номаълум"
#: lpr/lprngtoolhandler.cpp:162
msgid "No driver defined for that printer. It might be a raw printer."
msgstr ""
#: lpr/lprngtoolhandler.cpp:170
msgid "LPRngTool Common Driver (%1)"
msgstr "LPRngTool умумий драйвери (%1)"
#: lpr/matichandler.cpp:82
msgid "Network printer"
msgstr "Тармоқдаги принтер"
#: lpr/matichandler.cpp:245
msgid "Internal error."
msgstr "Ички хато."
#: lpr/matichandler.cpp:339
msgid ""
"You probably don't have the required permissions to perform that operation."
msgstr "Эҳтимол, бу амални бажариш учун сизда етарли ҳуқуқлар йўқ."
#: lpr/matichandler.cpp:426
msgid ""
"Unable to find executable lpdomatic. Check that Foomatic is correctly "
"installed and that lpdomatic is installed in a standard location."
msgstr ""
"lpdomatic дастури топилмади. Foomatic тўғри ўрнатилганлигини ва lpdomatic "
"андоза манзилга ўрнатилганлигини текширинг."
#: lpr/matichandler.cpp:457
#, c-format
msgid "Unable to remove driver file %1."
msgstr "Драйвер файлини (%1) олиб ташлаб бўлмади."
#: management/kaddprinterwizard.cpp:10
msgid "Configure TDE Print"
msgstr "TDE босиб чиқаришни мослаш"
#: management/kaddprinterwizard.cpp:11
msgid "Configure print server"
msgstr "Босиб чиқариш серверини мослаш"
#: management/kaddprinterwizard.cpp:18
msgid "Start the add printer wizard"
msgstr "Принтерни қўшиш ёрдамчисини ишга тушириш"
#: management/kmconfigcommand.cpp:33
msgid "Commands"
msgstr "Буйруқлар"
#: management/kmconfigcommand.cpp:34
msgid "Command Settings"
msgstr "Буйруқ мосламалари"
#: management/kmconfigcommand.cpp:37
msgid "Edit/Create Commands"
msgstr "Буйруқларни таҳрирлаш/яратиш"
#: management/kmconfigcommand.cpp:39
msgid ""
"<p>Command objects perform a conversion from input to output.<br>They are "
"used as the basis to build both print filters and special printers. They are "
"described by a command string, a set of options, a set of requirements and "
"associated mime types. Here you can create new command objects and edit "
"existing ones. All changes will only be effective for you."
msgstr ""
#: management/kmconfigdialog.cpp:38
msgid "TDE Print Configuration"
msgstr "TDE босиб чиқаришни мослаш"
#: management/kmconfigfilter.cpp:40
msgid "Filter"
msgstr "Филтер"
#: management/kmconfigfilter.cpp:41
msgid "Printer Filtering Settings"
msgstr "Принтерни филтрлаш мосламалари"
#: management/kmconfigfilter.cpp:44
msgid "Printer Filter"
msgstr "Принтернинг филтери"
#: management/kmconfigfilter.cpp:56
msgid ""
"The printer filtering allows you to view only a specific set of printers "
"instead of all of them. This may be useful when there are a lot of printers "
"available but you only use a few ones. Select the printers you want to see "
"from the list on the left or enter a <b>Location</b> filter (ex: Group_1*). "
"Both are cumulative and ignored if empty."
msgstr ""
#: management/kmconfigfilter.cpp:62
msgid "Location filter:"
msgstr "Манзил учун филтер:"
#: management/kmconfigfonts.cpp:43
msgid "Font Settings"
msgstr "Шрифт мосламалари"
#: management/kmconfigfonts.cpp:46
msgid "Fonts Embedding"
msgstr ""
#: management/kmconfigfonts.cpp:47
msgid "Fonts Path"
msgstr "Шрифтлар йўли"
#: management/kmconfigfonts.cpp:49
msgid "&Embed fonts in PostScript data when printing"
msgstr ""
#: management/kmconfigfonts.cpp:57
msgid "&Up"
msgstr "&Юқорига"
#: management/kmconfigfonts.cpp:58
msgid "&Down"
msgstr "&Пастга"
#: management/kmconfigfonts.cpp:59
msgid "&Add"
msgstr "&Қўшиш"
#: management/kmconfigfonts.cpp:61
msgid "Additional director&y:"
msgstr "Қўшимча &директория:"
#: management/kmconfigfonts.cpp:85
msgid ""
"These options will automatically put fonts in the PostScript file which are "
"not present on the printer. Font embedding usually produces better print "
"results (closer to what you see on the screen), but larger print data as "
"well."
msgstr ""
#: management/kmconfigfonts.cpp:89
msgid ""
"When using font embedding you can select additional directories where TDE "
"should search for embeddable font files. By default, the X server font path "
"is used, so adding those directories is not needed. The default search path "
"should be sufficient in most cases."
msgstr ""
#: management/kmconfiggeneral.cpp:45 management/kmpropgeneral.cpp:55
msgid "General Settings"
msgstr "Умумий мосламалар"
#: management/kmconfiggeneral.cpp:48
msgid "Refresh Interval"
msgstr "Янгилаш оралиғи"
#: management/kmconfiggeneral.cpp:51
msgid " sec"
msgstr " сония"
#: management/kmconfiggeneral.cpp:53
msgid ""
"This time setting controls the refresh rate of various <b>TDE Print</b> "
"components like the print manager and the job viewer."
msgstr ""
"Бу вақт мосламаси босиб чиқариш бошқарувчиси ва вазифаларни кўрсатувчига "
"ўхшаган турли ҳил <b>TDE босиб чиқариш</b> компонентларини янгилаш вақтини "
"белгилайди."
#: management/kmconfiggeneral.cpp:57
msgid "Test Page"
msgstr "Синов бети"
#: management/kmconfiggeneral.cpp:58
msgid "&Specify personal test page"
msgstr "&Шахсий синов бетини аниқлаш"
#: management/kmconfiggeneral.cpp:60
msgid "Preview..."
msgstr "Кўриб чиқиш"
#: management/kmconfiggeneral.cpp:70
msgid "Sho&w printing status message box"
msgstr "Босиб чиқариш ҳолатини махсус ойнада &кўрсатиш"
#: management/kmconfiggeneral.cpp:71
msgid "De&faults to the last printer used in the application"
msgstr ""
#: management/kmconfiggeneral.cpp:127
msgid ""
"The selected test page is not a PostScript file. You may not be able to test "
"your printer anymore."
msgstr ""
"Танланган синов бети PostScript файли эмас. Принтерни синаб бўлмаслиги "
"мумкин."
#: management/kmconfiggeneral.cpp:137 management/kmwfile.cpp:60
msgid "Empty file name."
msgstr "Файлнинг номи кўрсатилмаган."
#: management/kmconfigjobs.cpp:33 management/kmpages.cpp:59
msgid "Jobs"
msgstr "Вазифалар"
#: management/kmconfigjobs.cpp:34 management/kmjobviewer.cpp:718
msgid "Print Job Settings"
msgstr "Босиб чиқариш вазифаларнинг мосламалари"
#: management/kmconfigjobs.cpp:37
msgid "Jobs Shown"
msgstr "Кўриш мумкин бўлган вазифалар"
#: management/kmconfigjobs.cpp:41 management/kmjobviewer.cpp:172
#: management/kmjobviewer.cpp:343
msgid "Unlimited"
msgstr "Чексиз"
#: management/kmconfigjobs.cpp:42
msgid "Maximum number of jobs shown:"
msgstr "Кўриш мумкин бўлган вазифалар сонининг юқори чегараси:"
#: management/kmconfigpreview.cpp:35
msgid "Preview"
msgstr "Кўриб чиқиш"
#: management/kmconfigpreview.cpp:36
msgid "Preview Settings"
msgstr "Кўриб чиқиш мосламалари"
#: management/kmconfigpreview.cpp:39
msgid "Preview Program"
msgstr "Кўриб чиқадиган дастур"
#: management/kmconfigpreview.cpp:41
msgid "&Use external preview program"
msgstr "Кўриб чиқиш учун &ташқи дастурни ишлатиш"
#: management/kmconfigpreview.cpp:44
msgid ""
"You can use an external preview program (PS viewer) instead of the TDE built-"
"in preview system. Note that if the TDE default PS viewer (KGhostView) "
"cannot be found, TDE tries automatically to find another external PostScript "
"viewer"
msgstr ""
"TDE'нинг кўриб чиқиш тизимидан фойдаланиш ўрнига, сиз ташқи дастурдан "
"(PostScript кўрувчи) фойдаланишингиз мумкин. Эътибор беринг, агар TDE'нинг "
"андоза PostScript кўрувчи дастури (KGhostView) топилмаса, TDE автоматик "
"равишда бошқа ташқи PostScript кўрувчи дастурини топишга уринади."
#: management/kmdbcreator.cpp:92
msgid ""
"No executable defined for the creation of the driver database. This "
"operation is not implemented."
msgstr ""
"Драйвер маълумот базасини яратиш учун буйруқ кўрсатилмаган. Бу амалга "
"оширилмаган."
#: management/kmdbcreator.cpp:95
msgid ""
"The executable %1 could not be found in your PATH. Check that this program "
"exists and is accessible in your PATH variable."
msgstr ""
"Буйруқ (%1) сизнинг $PATH муҳит ўзгарувчингизда кўрсатилган директориялар "
"ичида топилмади. Бу дастур мавжудлигини ва у жойлашган директория сизнинг "
"$PATH муҳит ўзгарувчингизда кўрсатилганлигини текширинг."
#: management/kmdbcreator.cpp:99
msgid ""
"Unable to start the creation of the driver database. The execution of %1 "
"failed."
msgstr ""
"Драйвер маълумот базасини яратиб бўлмади. Буйруқни (%1) бажариш "
"муваффақиятсиз тугади."
#: management/kmdbcreator.cpp:113
msgid "Please wait while TDE rebuilds a driver database."
msgstr "Илтимос TDE драйвер маълумот базасини қайтадан яратгунча кутиб туринг."
#: management/kmdbcreator.cpp:114
msgid "Driver Database"
msgstr "Драйвер маълумот базаси"
#: management/kmdbcreator.cpp:171
msgid ""
"Error while creating driver database: abnormal child-process termination."
msgstr ""
#: management/kmdriverdbwidget.cpp:51
msgid "&PostScript printer"
msgstr "Postscript &принтер"
#: management/kmdriverdbwidget.cpp:52
msgid "&Raw printer (no driver needed)"
msgstr ""
#: management/kmdriverdbwidget.cpp:55
msgid "&Other..."
msgstr "&Бошқа"
#: management/kmdriverdbwidget.cpp:56
msgid "&Manufacturer:"
msgstr "&Ишлаб чиқарувчи:"
#: management/kmdriverdbwidget.cpp:57
msgid "Mo&del:"
msgstr "&Модели:"
#: management/kmdriverdbwidget.cpp:157 management/kmdriverdbwidget.cpp:166
msgid "Loading..."
msgstr "Юкланмоқда..."
#: management/kmdriverdbwidget.cpp:217
msgid "Unable to find the PostScript driver."
msgstr "Postscript драйвери топилмади."
#: management/kmdriverdbwidget.cpp:230
msgid "Select Driver"
msgstr "Драйверни танлаш"
#: management/kmdriverdbwidget.cpp:247 management/kmdriverdbwidget.cpp:249
msgid "<Unknown>"
msgstr "<Номаълум>"
#: management/kmdriverdbwidget.cpp:252
msgid "Database"
msgstr "Маълумот базаси"
#: management/kmdriverdbwidget.cpp:259
msgid "Wrong driver format."
msgstr "Драйвернинг формати нотўғри."
#: management/kmdriverdbwidget.cpp:268
msgid "Other"
msgstr "Бошқа"
#: management/kmdriverdialog.cpp:48
msgid ""
"Some options are in conflict. You must resolve those conflicts before "
"continuing."
msgstr ""
#: management/kminfopage.cpp:44 management/kmpropgeneral.cpp:38
msgid ""
"_: Physical Location\n"
"Location:"
msgstr "Манзили:"
#: management/kminfopage.cpp:46 management/kmpropgeneral.cpp:39
#: management/kmwname.cpp:41
msgid "Description:"
msgstr "Таърифи:"
#: management/kminfopage.cpp:54 management/kminfopage.cpp:93
#: tools/escputil/escpwidget.cpp:101
msgid "Device:"
msgstr "Ускуна:"
#: management/kminfopage.cpp:56
msgid "Model:"
msgstr "Модели:"
#: management/kminfopage.cpp:92
msgid "Members:"
msgstr "Аъзолар:"
#: management/kminfopage.cpp:112
msgid "Implicit class"
msgstr ""
#: management/kminfopage.cpp:114
msgid "Remote class"
msgstr "Масофадаги синф"
#: management/kminfopage.cpp:115
msgid "Local class"
msgstr "Локал синф"
#: management/kminfopage.cpp:117
msgid "Remote printer"
msgstr "Масофадаги принтер"
#: management/kminfopage.cpp:120
msgid "Special (pseudo) printer"
msgstr "Махсус (сохта) принтер"
#: management/kminfopage.cpp:121
msgid ""
"_: Unknown class of printer\n"
"Unknown"
msgstr "Номаълум"
#: management/kminstancepage.cpp:61
msgid ""
"Define/Edit here instances for the current selected printer. An instance is "
"a combination of a real (physical) printer and a set of predefined options. "
"For a single InkJet printer, you could define different print formats like "
"<i>DraftQuality</i>, <i>PhotoQuality</i> or <i>TwoSided</i>. Those instances "
"appear as normal printers in the print dialog and allow you to quickly "
"select the print format you want."
msgstr ""
#: management/kminstancepage.cpp:87
msgid "New..."
msgstr "Янги"
#: management/kminstancepage.cpp:88
msgid "Copy..."
msgstr "Нусха олиш"
#: management/kminstancepage.cpp:92
msgid "Settings"
msgstr "Мосламалар"
#: management/kminstancepage.cpp:94
msgid "Test..."
msgstr "Синаш"
#: management/kminstancepage.cpp:113 management/kminstancepage.cpp:126
#: management/kminstancepage.cpp:138 management/kminstancepage.cpp:145
#: management/kminstancepage.cpp:161 management/kminstancepage.cpp:164
#: management/kminstancepage.cpp:183 management/kminstancepage.cpp:190
#: management/kminstancepage.cpp:192 management/kminstancepage.cpp:210
#: management/kminstancepage.cpp:244 management/kminstancepage.cpp:260
msgid "(Default)"
msgstr "(Андоза)"
#: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182
msgid "Instance Name"
msgstr ""
#: management/kminstancepage.cpp:137 management/kminstancepage.cpp:182
msgid "Enter name for new instance (leave untouched for default):"
msgstr ""
#: management/kminstancepage.cpp:142 management/kminstancepage.cpp:187
msgid "Instance name must not contain any spaces or slashes."
msgstr ""
#: management/kminstancepage.cpp:161
msgid "Do you really want to remove instance %1?"
msgstr ""
#: management/kminstancepage.cpp:161
msgid ""
"You can't remove the default instance. However all settings of %1 will be "
"discarded. Continue?"
msgstr ""
#: management/kminstancepage.cpp:213
#, c-format
msgid "Unable to find instance %1."
msgstr ""
#: management/kminstancepage.cpp:215
#, c-format
msgid ""
"Unable to retrieve printer information. Message from printing system: %1."
msgstr ""
"Принтер ҳақида маълумотни аниқлаб бўлмади. Босиб чиқариш сисемасидан олинган "
"хабар: %1."
#: management/kminstancepage.cpp:232
msgid "The instance name is empty. Please select an instance."
msgstr ""
#: management/kminstancepage.cpp:264
msgid "Internal error: printer not found."
msgstr "Ички хато: принтер топилмади."
#: management/kminstancepage.cpp:265 management/kmmainview.cpp:629
msgid "You are about to print a test page on %1. Do you want to continue?"
msgstr ""
"Сиз синов бетини принтерда (%1) босиб чиқариш арафасидасиз. Давом этишни "
"истайсизми?"
#: management/kminstancepage.cpp:265 management/kmmainview.cpp:629
msgid "Print Test Page"
msgstr "Синов бетини босиб чиқариш"
#: management/kminstancepage.cpp:268
#, c-format
msgid "Unable to send test page to %1."
msgstr "Синов бетини принтерга (%1) юбориб бўлмади."
#: management/kminstancepage.cpp:270 management/kmmainview.cpp:632
#, c-format
msgid "Test page successfully sent to printer %1."
msgstr "Синов бети муваффақиятли принтерга (%1) юборилди."
#: management/kmjobviewer.cpp:101 management/kmjobviewer.cpp:160
msgid "No Printer"
msgstr "Ҳеч қандай принтер"
#: management/kmjobviewer.cpp:140 management/kmjobviewer.cpp:179
#: management/kmjobviewer.cpp:196 management/kmjobviewer.cpp:212
#: management/kmjobviewer.cpp:363 management/kmjobviewer.cpp:562
msgid "All Printers"
msgstr "Ҳамма принтерлар"
#: management/kmjobviewer.cpp:153
#, c-format
msgid "Print Jobs for %1"
msgstr "%1 принтери учун вазифалар"
#: management/kmjobviewer.cpp:172 management/kmjobviewer.cpp:174
#: management/kmjobviewer.cpp:343
#, c-format
msgid "Max.: %1"
msgstr "Макс.: %1"
#: management/kmjobviewer.cpp:237
msgid "Job ID"
msgstr "Вазифа рақами"
#: management/kmjobviewer.cpp:238
msgid "Owner"
msgstr "Эгаси"
#: management/kmjobviewer.cpp:240
msgid ""
"_: Status\n"
"State"
msgstr "Ҳолати"
#: management/kmjobviewer.cpp:241
msgid "Size (KB)"
msgstr "Ҳажми (Кб)"
#: management/kmjobviewer.cpp:242
msgid "Page(s)"
msgstr "Бет(лар)"
#: management/kmjobviewer.cpp:264
msgid "&Hold"
msgstr "&Вақтинча тўхтатиш"
#: management/kmjobviewer.cpp:265
msgid "&Resume"
msgstr "&Давом этиш"
#: management/kmjobviewer.cpp:266
msgid "Remo&ve"
msgstr "&Олиб ташлаш"
#: management/kmjobviewer.cpp:267
msgid "Res&tart"
msgstr "Қай&тадан бошлаш"
#: management/kmjobviewer.cpp:268
msgid "&Move to Printer"
msgstr "Бошқа принтерга &кўчириш"
#: management/kmjobviewer.cpp:274
msgid "&Toggle Completed Jobs"
msgstr "&Бажарилган вазифаларни кўрсатиш/бекитиш"
#: management/kmjobviewer.cpp:277
msgid "Show Only User Jobs"
msgstr "Фақат фойдаланувчининг вазифаларини кўрсатиш"
#: management/kmjobviewer.cpp:278
msgid "Hide Only User Jobs"
msgstr "Фақат фойдаланувчининг вазифаларини бекитиш"
#: management/kmjobviewer.cpp:286
msgid "User Name"
msgstr "Фойдаланувчи"
#: management/kmjobviewer.cpp:303
msgid "&Select Printer"
msgstr "Принтерни &танлаш"
#: management/kmjobviewer.cpp:332
msgid "Refresh"
msgstr "Янгилаш"
#: management/kmjobviewer.cpp:336
msgid "Keep window permanent"
msgstr "Ойнани очиқ қолдириш"
#: management/kmjobviewer.cpp:493
msgid ""
"Unable to perform action \"%1\" on selected jobs. Error received from "
"manager:"
msgstr ""
"Танланган вазифаларга амални \"%1\" қўллаб бўлмади. Бошқарувчидан олинган "
"хато хабари:"
#: management/kmjobviewer.cpp:505
msgid "Hold"
msgstr "Вақтинча тўхтатиш"
#: management/kmjobviewer.cpp:510
msgid "Resume"
msgstr "Давом этиш"
#: management/kmjobviewer.cpp:520
msgid "Restart"
msgstr "Қайтадан ишга тушириш"
#: management/kmjobviewer.cpp:528
#, c-format
msgid "Move to %1"
msgstr "%1 принтерига кўчириш"
#: management/kmjobviewer.cpp:693
msgid "Operation failed."
msgstr "Амал муваффақиятсиз тугади."
#: management/kmlistview.cpp:125
msgid "Print System"
msgstr "Босиб чиқариш тизими"
#: management/kmlistview.cpp:128
msgid "Classes"
msgstr "Синфлар"
#: management/kmlistview.cpp:131
msgid "Printers"
msgstr "Принтерлар"
#: management/kmlistview.cpp:134
msgid "Specials"
msgstr "Махсус принтерлар"
#: management/kmmainview.cpp:72
msgid ""
"The printer %1 already exists. Continuing will overwrite existing printer. "
"Do you want to continue?"
msgstr ""
"Принтер (%1) аллақачон мавжуд. Давом этилса мавжуд принтер алмаштирилади. "
"Давом этишни истайсизми?"
#: management/kmmainview.cpp:133 management/kmmainview.cpp:783
#: management/kmmainview.cpp:859 management/kmmainview.cpp:883
msgid "Initializing manager..."
msgstr "Бошқарувчи ишга тайёрланмоқда..."
#: management/kmmainview.cpp:180
msgid "&Icons,&List,&Tree"
msgstr "&Нишончалар,&Рўйхат,&Дарахт"
#: management/kmmainview.cpp:184
msgid "Start/Stop Printer"
msgstr "Принтерни ишга тушириш/тўхтатиш"
#: management/kmmainview.cpp:186
msgid "&Start Printer"
msgstr "Принтерни &ишга тушириш"
#: management/kmmainview.cpp:187
msgid "Sto&p Printer"
msgstr "Принтерни &тўхтатиш"
#: management/kmmainview.cpp:189
msgid "Enable/Disable Job Spooling"
msgstr "Вазифани спулинг қилишни ёқиш/ўчириш"
#: management/kmmainview.cpp:191
msgid "&Enable Job Spooling"
msgstr "Вазифани спулинг қилишни &ёқиш"
#: management/kmmainview.cpp:192
msgid "&Disable Job Spooling"
msgstr "Вазифани спулинг қилишни &ўчириш"
#: management/kmmainview.cpp:195
msgid "&Configure..."
msgstr "&Мослаш..."
#: management/kmmainview.cpp:196
msgid "Add &Printer/Class..."
msgstr "Принтерни/Синфни &қўшиш"
#: management/kmmainview.cpp:197
msgid "Add &Special (pseudo) Printer..."
msgstr "&Махсус (сохта) принтерни қўшиш"
#: management/kmmainview.cpp:198
msgid "Set as &Local Default"
msgstr "&Локал андоза деб белгилаш"
#: management/kmmainview.cpp:199
msgid "Set as &User Default"
msgstr "&Фойдаланувчининг андозаси сифатида белгилаш"
#: management/kmmainview.cpp:200
msgid "&Test Printer..."
msgstr "Принтерни &синаш"
#: management/kmmainview.cpp:201
msgid "Configure &Manager..."
msgstr "Бошқарувчини &мослаш"
#: management/kmmainview.cpp:202
msgid "Initialize Manager/&View"
msgstr ""
#: management/kmmainview.cpp:204
msgid "&Orientation"
msgstr "&Жойлашиши"
#: management/kmmainview.cpp:207
msgid "&Vertical,&Horizontal"
msgstr "&Вертикал,&Горизонтал"
#: management/kmmainview.cpp:211
msgid "R&estart Server"
msgstr "Серверни қайтадан &ишга тушириш"
#: management/kmmainview.cpp:212
msgid "Configure &Server..."
msgstr "С&ерверни мослаш"
#: management/kmmainview.cpp:213
#, fuzzy
msgid "Configure Server Access..."
msgstr "С&ерверни мослаш"
#: management/kmmainview.cpp:216
msgid "Hide &Toolbar"
msgstr "&Асбоблар панелини бекитиш"
#: management/kmmainview.cpp:218
msgid "Show Me&nu Toolbar"
msgstr "Мен&юлар панелини кўрсатиш"
#: management/kmmainview.cpp:219
msgid "Hide Me&nu Toolbar"
msgstr "Менюлар пане&лини бекитиш"
#: management/kmmainview.cpp:221
msgid "Show Pr&inter Details"
msgstr "Принтернинг та&фсилотларини кўрсатиш"
#: management/kmmainview.cpp:222
msgid "Hide Pr&inter Details"
msgstr "Принтернинг тафсилотларини &бекитиш"
#: management/kmmainview.cpp:226
msgid "Toggle Printer &Filtering"
msgstr "Принтерни филтерла&шни ўчириш/ёқиш"
#: management/kmmainview.cpp:230
msgid "Pri&nter Tools"
msgstr "Принтернинг &воситалари"
#: management/kmmainview.cpp:295
msgid "Print Server"
msgstr "Босиб чиқариш сервери"
#: management/kmmainview.cpp:301
msgid "Print Manager"
msgstr "Босиб чиқариш бошқарувчиси"
#: management/kmmainview.cpp:334
msgid "An error occurred while retrieving the printer list."
msgstr "Принтерлар рўйхатини аниқлашда хато рўй берди."
#: management/kmmainview.cpp:511
#, c-format
msgid "Unable to modify the state of printer %1."
msgstr "Принтернинг (%1) ҳолатини ўзгартириб бўлмади."
#: management/kmmainview.cpp:522
msgid "Do you really want to remove %1?"
msgstr "Ростдан %1'ни олиб ташламоқчимисиз?"
#: management/kmmainview.cpp:526
#, c-format
msgid "Unable to remove special printer %1."
msgstr "Махсус принтерни (%1) олиб ташлаб бўлмади."
#: management/kmmainview.cpp:529
#, c-format
msgid "Unable to remove printer %1."
msgstr "Принтерни (%1) олиб ташлаб бўлмади."
#: management/kmmainview.cpp:559
#, c-format
msgid "Configure %1"
msgstr "%1 мосламаси"
#: management/kmmainview.cpp:566
#, c-format
msgid "Unable to modify settings of printer %1."
msgstr "Принтер (%1) мосламаларини ўзгартириб бўлмади."
#: management/kmmainview.cpp:570
#, c-format
msgid "Unable to load a valid driver for printer %1."
msgstr "Принтер (%1) учун керакли драйверни юклаб бўлмади."
#: management/kmmainview.cpp:582
msgid "Unable to create printer."
msgstr "Принтерни яратиб бўлмади."
#: management/kmmainview.cpp:594
msgid "Unable to define printer %1 as default."
msgstr "Принтерни (%1) андоза сифатида белгилаб бўлмади."
#: management/kmmainview.cpp:634
#, c-format
msgid "Unable to test printer %1."
msgstr "Принтерни (%1) синаб бўлмади."
#: management/kmmainview.cpp:647
msgid "Error message received from manager:</p><p>%1</p>"
msgstr "Бошқарувчидан олинган хато хабари:</p><p>%1</p>"
#: management/kmmainview.cpp:649
msgid "Internal error (no error message)."
msgstr "Ички хато (хато хабари йўқ)."
#: management/kmmainview.cpp:667
msgid "Unable to restart print server."
msgstr "Босиб чиқариш серверини қайтадан ишга тушириб бўлмади."
#: management/kmmainview.cpp:672
msgid "Restarting server..."
msgstr "Сервер қайтадан ишга туширилмоқда..."
#: management/kmmainview.cpp:682
msgid "Unable to configure print server."
msgstr "Босиб чиқариш серверини мослаб бўлмади."
#: management/kmmainview.cpp:687
msgid "Configuring server..."
msgstr "Сервер мосланмоқда..."
#: management/kmmainview.cpp:842
msgid ""
"Unable to start printer tool. Possible reasons are: no printer selected, the "
"selected printer doesn't have any local device defined (printer port), or "
"the tool library could not be found."
msgstr ""
#: management/kmmainview.cpp:866
msgid "Unable to retrieve the printer list."
msgstr "Принтерлар рўйхатини аниқлаб бўлмади."
#: management/kmpages.cpp:69
msgid "Instances"
msgstr ""
#: management/kmpropbackend.cpp:34
msgid "Printer type:"
msgstr "Принтернинг тури:"
#: management/kmpropbackend.cpp:48
msgid "Interface"
msgstr "Интерфейс"
#: management/kmpropbackend.cpp:49
msgid "Interface Settings"
msgstr "Интерфейснинг мосламалари"
#: management/kmpropbackend.cpp:62
msgid "IPP Printer"
msgstr "IPP принтер"
#: management/kmpropbackend.cpp:63
msgid "Local USB Printer"
msgstr "Локал USB принтер"
#: management/kmpropbackend.cpp:64
msgid "Local Parallel Printer"
msgstr "Локал параллел принтер"
#: management/kmpropbackend.cpp:65
msgid "Local Serial Printer"
msgstr "Локал кетма-кет принтер"
#: management/kmpropbackend.cpp:66
msgid "Network Printer (socket)"
msgstr "Тармоқдаги принтер (сокет)"
#: management/kmpropbackend.cpp:67
msgid "SMB printers (Windows)"
msgstr "SMB принтерлар (Windows)"
#: management/kmpropbackend.cpp:69
msgid "File printer"
msgstr "Файл принтер"
#: management/kmpropbackend.cpp:70
msgid "Serial Fax/Modem printer"
msgstr "Кетма-кет факс/модем принтер"
#: management/kmpropbackend.cpp:71
msgid ""
"_: Unknown Protocol\n"
"Unknown"
msgstr "Номаълум"
#: management/kmpropcontainer.cpp:35
msgid "Change..."
msgstr "Ўзгартириш"
#: management/kmpropdriver.cpp:36
msgid "Manufacturer:"
msgstr "Ишлаб чиқарувчи:"
#: management/kmpropdriver.cpp:37
msgid "Printer model:"
msgstr "Принтернинг модели:"
#: management/kmpropdriver.cpp:38
msgid "Driver info:"
msgstr "Драйвер ҳақида маълумот:"
#: management/kmpropgeneral.cpp:37
msgid "Printer name:"
msgstr "Принтернинг номи:"
#: management/kmpropmembers.cpp:39 management/kmwend.cpp:59
msgid "Members"
msgstr "Аъзолар"
#: management/kmpropmembers.cpp:40
msgid "Class Members"
msgstr "Синфнинг аъзолари"
#: management/kmpropwidget.cpp:50
msgid ""
"<qt>Unable to change printer properties. Error received from manager:<p>%1</"
"p></qt>"
msgstr ""
"<qt>Принтернинг хоссаларини ўзгартириб бўлмади. Бошқарувчидан олинган хато "
"хабари:<p>%1</p></qt>"
#: management/kmspecialprinterdlg.cpp:46
msgid "Add Special Printer"
msgstr "Махсус принтерни қўшиш"
#: management/kmspecialprinterdlg.cpp:57 management/kxmlcommanddlg.cpp:115
#: management/kxmlcommanddlg.cpp:866
msgid "&Description:"
msgstr "&Таърифи:"
#: management/kmspecialprinterdlg.cpp:58
msgid "&Location:"
msgstr "&Манзили:"
#: management/kmspecialprinterdlg.cpp:66
msgid "Command &Settings"
msgstr "Буй&руқ мосламалари"
#: management/kmspecialprinterdlg.cpp:69
msgid "Outp&ut File"
msgstr "&Натижа файли"
#: management/kmspecialprinterdlg.cpp:71
msgid "&Enable output file"
msgstr "Нати&жа файлини ёқиш"
#: management/kmspecialprinterdlg.cpp:83 management/kxmlcommanddlg.cpp:116
msgid "&Format:"
msgstr "&Формати:"
#: management/kmspecialprinterdlg.cpp:88
msgid "Filename e&xtension:"
msgstr "Файлнинг кен&гайтмаси:"
#: management/kmspecialprinterdlg.cpp:105
msgid ""
"<p>The command will use an output file. If checked, make sure the command "
"contains an output tag.</p>"
msgstr ""
#: management/kmspecialprinterdlg.cpp:108
#, c-format
msgid ""
"<p>The command to execute when printing on this special printer. Either "
"enter the command to execute directly, or associate/create a command object "
"with/for this special printer. The command object is the preferred method as "
"it provides support for advanced settings like mime type checking, "
"configurable options and requirement list (the plain command is only "
"provided for backward compatibility). When using a plain command, the "
"following tags are recognized:</p><ul><li><b>%in</b>: the input file "
"(required).</li><li><b>%out</b>: the output file (required if using an "
"output file).</li><li><b>%psl</b>: the paper size in lower case.</li><li><b>"
"%psu</b>: the paper size with the first letter in upper case.</li></ul>"
msgstr ""
#: management/kmspecialprinterdlg.cpp:118
msgid ""
"<p>The default mimetype for the output file (e.g. application/postscript).</"
"p>"
msgstr "<p>Натижа файлининг MIME тури (масалан: application/postscript).</p>"
#: management/kmspecialprinterdlg.cpp:121
msgid "<p>The default extension for the output file (e.g. ps, pdf, ps.gz).</p>"
msgstr "<p>Натижа файлининг кенгайтмаси (масалан: ps, pdf, ps.gz).</p>"
#: management/kmspecialprinterdlg.cpp:170
msgid "You must provide a non-empty name."
msgstr "Номни киритишингиз шарт."
#: management/kmspecialprinterdlg.cpp:178
#, c-format
msgid "Invalid settings. %1."
msgstr "Нотўғри мосламалар. %1."
#: management/kmspecialprinterdlg.cpp:197
#, c-format
msgid "Configuring %1"
msgstr "%1 мосланмоқда"
#: management/kmwbackend.cpp:54
msgid "Backend Selection"
msgstr "Интерфейсни танлаш"
#: management/kmwbackend.cpp:68
msgid "You must select a backend."
msgstr "Интерфейсни танлашингиз шарт."
#: management/kmwbackend.cpp:115
msgid "&Local printer (parallel, serial, USB)"
msgstr "&Локал принтер (параллел, кетма-кет, USB)"
#: management/kmwbackend.cpp:116
msgid ""
"<qt><p>Locally-connected printer</p><p>Use this for a printer connected to "
"the computer via a parallel, serial or USB port.</p></qt>"
msgstr ""
#: management/kmwbackend.cpp:122
msgid "&SMB shared printer (Windows)"
msgstr ""
#: management/kmwbackend.cpp:123
msgid ""
"<qt><p>Shared Windows printer</p><p>Use this for a printer installed on a "
"Windows server and shared on the network using the SMB protocol (samba).</"
"p></qt>"
msgstr ""
#: management/kmwbackend.cpp:130
msgid "&Remote LPD queue"
msgstr "&Масофадаги LPD навбат"
#: management/kmwbackend.cpp:131
msgid ""
"<qt><p>Print queue on a remote LPD server</p><p>Use this for a print queue "
"existing on a remote machine running a LPD print server.</p></qt>"
msgstr ""
#: management/kmwbackend.cpp:137
msgid "Ne&twork printer (TCP)"
msgstr "&Тармоқдаги принтер (TCP)"
#: management/kmwbackend.cpp:138
msgid ""
"<qt><p>Network TCP printer</p><p>Use this for a network-enabled printer "
"using TCP (usually on port 9100) as communication protocol. Most network "
"printers can use this mode.</p></qt>"
msgstr ""
#: management/kmwclass.cpp:37
msgid "Class Composition"
msgstr ""
#: management/kmwclass.cpp:52
msgid "Available printers:"
msgstr "Фойдаланиб бўладиган принтерлар:"
#: management/kmwclass.cpp:53
msgid "Class printers:"
msgstr "Синфнинг принтерлари:"
#: management/kmwclass.cpp:79
msgid "You must select at least one printer."
msgstr "Ҳеч бўлмаганда битта принтерни танлашингиз шарт."
#: management/kmwdriver.cpp:33
msgid "Printer Model Selection"
msgstr "Принтернинг моделини танлаш"
#: management/kmwdriver.cpp:80 management/kmwend.cpp:106
#: management/kmwname.cpp:83
msgid "Raw printer"
msgstr ""
#: management/kmwdriver.cpp:113
msgid "Internal error: unable to locate the driver."
msgstr "Ички хато: драйвер топилмади."
#: management/kmwdriverselect.cpp:37
msgid "Driver Selection"
msgstr "Драйверни танлаш"
#: management/kmwdriverselect.cpp:43
msgid ""
"<p>Several drivers have been detected for this model. Select the driver you "
"want to use. You will have the opportunity to test it as well as to change "
"it if necessary.</p>"
msgstr ""
"<p>Принтернинг бу модели учун бир нечта драйвер топилди. Сиз фойдаланмоқчи "
"бўлган драйверни танланг. Кейинчалик, агар керак бўлса, сиз уни синашингиз "
"ва ўзгартиришингиз мумкин.</p>"
#: management/kmwdriverselect.cpp:46
msgid "Driver Information"
msgstr "Драйвер ҳақида маълумот"
#: management/kmwdriverselect.cpp:62
msgid "You must select a driver."
msgstr "Драйверни танлашингиз шарт."
#: management/kmwdriverselect.cpp:82
msgid " [recommended]"
msgstr " [тавсия қилинади]"
#: management/kmwdriverselect.cpp:113
msgid "No information about the selected driver."
msgstr "Танланган драйвер ҳақида ҳеч қандай маълумот йўқ."
#: management/kmwdrivertest.cpp:41
msgid "Printer Test"
msgstr "Принтерни синаш"
#: management/kmwdrivertest.cpp:51
msgid "<b>Manufacturer:</b>"
msgstr "<b>Ишлаб чиқарувчи:</b>"
#: management/kmwdrivertest.cpp:52
msgid "<b>Model:</b>"
msgstr "<b>Модели:</b>"
#: management/kmwdrivertest.cpp:53
msgid "<b>Description:</b>"
msgstr "<b>Таърифи:</b>"
#: management/kmwdrivertest.cpp:55
msgid "&Test"
msgstr "&Синаш"
#: management/kmwdrivertest.cpp:59
msgid ""
"<p>Now you can test the printer before finishing installation. Use the "
"<b>Settings</b> button to configure the printer driver and the <b>Test</b> "
"button to test your configuration. Use the <b>Back</b> button to change the "
"driver (your current configuration will be discarded).</p>"
msgstr ""
"<p>Ўрнатишни тугатишдан аввал сиз принтерни синашингиз мумкин. "
"<b>Мосламалар</b> тугмаси ёрдамида принтернинг драйверини мослашингиз ва "
"<b>Синаш</b> тугмаси ёрдамида мосламаларни синаб кўришингиз мумкин. "
"<b>Орқага</b> тугмаси ёрдамида драйверни ўзгартирсангиз бўлади (сизнинг "
"жорий мосламаларингиз бекор қилинади).</p>"
#: management/kmwdrivertest.cpp:117
msgid "<qt>Unable to load the requested driver:<p>%1</p></qt>"
msgstr "<qt>Талаб қилинган драйверни юклаб бўлмади:<p>%1</p></qt>"
#: management/kmwdrivertest.cpp:146
msgid ""
"Test page successfully sent to printer. Wait until printing is complete, "
"then click the OK button."
msgstr ""
"Синов бети муваффақиятли принтерга юборилди. Босиб чиқариш тугагунча кутиб "
"туринг кейин \"Oк\" тугмасини босинг."
#: management/kmwdrivertest.cpp:148
msgid "Unable to test printer: "
msgstr "Принтерни синаб бўлмади: "
#: management/kmwdrivertest.cpp:150
msgid "Unable to remove temporary printer."
msgstr "Вақтинчалик принтерни ўчириб бўлмади."
#: management/kmwdrivertest.cpp:153
msgid "Unable to create temporary printer."
msgstr "Вақтинчалик принтерни яратиб бўлмади."
#: management/kmwend.cpp:33
msgid "Confirmation"
msgstr "Тасдиқлаш"
#: management/kmwend.cpp:50 management/kmwend.cpp:106 management/kmwend.cpp:109
#: tdefilelist.cpp:102
msgid "Type"
msgstr "Тури"
#: management/kmwend.cpp:52
msgid "Location"
msgstr "Манзили"
#: management/kmwend.cpp:53 management/kmwend.cpp:112
#: management/kxmlcommanddlg.cpp:142 management/kxmlcommanddlg.cpp:545
msgid "Description"
msgstr "Таърифи"
#: management/kmwend.cpp:69
msgid "Backend"
msgstr "Интерфейс (Backend)"
#: management/kmwend.cpp:74
msgid "Device"
msgstr "Ускуна"
#: management/kmwend.cpp:77
msgid "Printer IP"
msgstr "Принтернинг IP рақами"
#: management/kmwend.cpp:78 management/kmwend.cpp:89
msgid "Port"
msgstr "Порт"
#: management/kmwend.cpp:81 management/kmwend.cpp:88
msgid "Host"
msgstr "Хост"
#: management/kmwend.cpp:82 rlpr/kmproprlpr.cpp:48
msgid "Queue"
msgstr "Навбат"
#: management/kmwend.cpp:91
msgid "Account"
msgstr "Фойдаланувчи"
#: management/kmwend.cpp:96
msgid "URI"
msgstr "URI"
#: management/kmwend.cpp:109
msgid "DB driver"
msgstr "DB драйвери"
#: management/kmwend.cpp:109
msgid "External driver"
msgstr "Ташқи драйвер"
#: management/kmwend.cpp:110
msgid "Manufacturer"
msgstr "Ишлаб чиқарувчи"
#: management/kmwend.cpp:111
msgid "Model"
msgstr "Модел"
#: management/kmwfile.cpp:35
msgid "File Selection"
msgstr "Файлни танлаш"
#: management/kmwfile.cpp:41
msgid ""
"<p>The printing will be redirected to a file. Enter here the path of the "
"file you want to use for redirection. Use an absolute path or the browse "
"button for graphical selection.</p>"
msgstr ""
#: management/kmwfile.cpp:44
msgid "Print to file:"
msgstr "Фалй сифатида сақлаш:"
#: management/kmwfile.cpp:66
msgid "Directory does not exist."
msgstr "Директория мавжуд эмас."
#: management/kmwinfopage.cpp:32
msgid "Introduction"
msgstr "Кириш"
#: management/kmwinfopage.cpp:37
#, fuzzy
msgid ""
"<p>Welcome,</p><br><p>This wizard will help to install a new printer on your "
"computer. It will guide you through the various steps of the process of "
"installing and configuring a printer for your printing system. At each step, "
"you can always go back using the <b>Back</b> button.</p><br><p>We hope you "
"enjoy this tool!</p><br>"
msgstr ""
"<p>Хуш келибсиз!</p><br><p>Бу ёрдамчи компьютерингизга янги принтерни "
"ўрнатишда сизга ёрдам беради. Босиб чиқариш тизим учун принтерни ўрнатиш ва "
"мослаш жараёнининг турли қадамлари сари ёрдамчи сизга йўл кўрсатади. Ҳар "
"қадамда, <b>Орқага</b> тугмаси ёрдамида бир қадам орқага қайтишингиз мумкин."
"</p><br><p>Умид қиламиз сиз бу воситани мириқиб ишлатасиз! </p><br><p "
"align=right><i>Босиб чиқариш билан шуғулланадиган TDE жамоаси</i>.</p>"
#: management/kmwizard.cpp:64 management/kmwizard.cpp:209
msgid "&Next >"
msgstr "&Кейинги >"
#: management/kmwizard.cpp:66
msgid "< &Back"
msgstr "< &Орқага"
#: management/kmwizard.cpp:131 management/kmwizard.cpp:166
#: management/kmwizard.cpp:191
msgid "Add Printer Wizard"
msgstr "Принтерни қўшиш ёрдамчиси"
#: management/kmwizard.cpp:166
msgid "Modify Printer"
msgstr "Принтерни ўзгартириш"
#: management/kmwizard.cpp:191
msgid "Unable to find the requested page."
msgstr "Талаб қилинган бет топилмади."
#: management/kmwizard.cpp:207 management/kmwizard.cpp:234
msgid "&Finish"
msgstr "&Тайёр"
#: management/kmwlocal.cpp:38
msgid "Local Port Selection"
msgstr "Локал портни танлаш"
#: management/kmwlocal.cpp:50
msgid "Local System"
msgstr "Локал тизим"
#: management/kmwlocal.cpp:57
msgid "Parallel"
msgstr "Параллел"
#: management/kmwlocal.cpp:58
msgid "Serial"
msgstr "Кетма-кет"
#: management/kmwlocal.cpp:59
msgid "USB"
msgstr "USB"
#: management/kmwlocal.cpp:63
msgid ""
"<p>Select a valid detected port, or enter directly the corresponding URI in "
"the bottom edit field.</p>"
msgstr ""
"<p>Топилган портни танланг ёки унга мос келадиган URI'ни қуйидаги майдонга "
"киритинг.</p>"
#: management/kmwlocal.cpp:78
msgid ""
"_: The URI is empty\n"
"Empty URI."
msgstr ""
#: management/kmwlocal.cpp:83
msgid "The local URI doesn't correspond to a detected port. Continue?"
msgstr "Локал URI топилган портга мос келмайди. Давом этайми?"
#: management/kmwlocal.cpp:85
msgid "Select a valid port."
msgstr "Тўғри келадиган портни танланг."
#: management/kmwlocal.cpp:166
msgid "Unable to detect local ports."
msgstr "Локал портларни топиб бўлмади."
#: management/kmwlpd.cpp:41
msgid "LPD Queue Information"
msgstr "LPD навбати ҳақида маълумот"
#: management/kmwlpd.cpp:44
msgid ""
"<p>Enter the information concerning the remote LPD queue; this wizard will "
"check it before continuing.</p>"
msgstr ""
"<p>Масофадаги LPD навбати ҳақида маълумотни киритинг. Давом этишдан олдин "
"ёрдамчи уни текшириб кўради.</p>"
#: management/kmwlpd.cpp:47 rlpr/kmproprlpr.cpp:35 rlpr/kmwrlpr.cpp:63
msgid "Queue:"
msgstr "Навбат:"
#: management/kmwlpd.cpp:54
msgid "Some information is missing."
msgstr "Қандайдир маълумот етишмаяпти."
#: management/kmwlpd.cpp:61
msgid "Cannot find queue %1 on server %2; do you want to continue anyway?"
msgstr ""
"%2 серверида %1 навбати топилмади. Бунга қарамасдан давом этишни истайсизми?"
#: management/kmwname.cpp:34
msgid "General Information"
msgstr "Умумий маълумот"
#: management/kmwname.cpp:37
msgid ""
"<p>Enter the information concerning your printer or class. <b>Name</b> is "
"mandatory, <b>Location</b> and <b>Description</b> are not (they may even not "
"be used on some systems).</p>"
msgstr ""
"<p>Принтер ёки синф ҳақида маълумотни киритинг. <b>Номи</b> - киритиш шарт "
"бўлган маълумот, <b>Манзили</b> ва <b>Таърифи</b> - шарт эмас (бази "
"тизимларда улар умуман ишлатилмайди).</p>"
#: management/kmwname.cpp:39
msgid "Name:"
msgstr "Номи:"
#: management/kmwname.cpp:48
msgid "You must supply at least a name."
msgstr "Ҳеч бўлмаганда номини киритишингиз шарт."
#: management/kmwname.cpp:56
msgid ""
"It is usually not a good idea to include spaces in printer name: it may "
"prevent your printer from working correctly. The wizard can strip all spaces "
"from the string you entered, resulting in %1; what do you want to do?"
msgstr ""
"Одатда, принтер номида бўш жой борлиги яхши эмас. Бу, принтерни тўғри "
"ишламасликга олиб келиши мумкин. Ёрдамчи бўш жойларни олиб ташлаб принтер "
"номини %1'га ўзгартириши мумкин. Сиз нима қилмоқчисиз?"
#: management/kmwname.cpp:62
msgid "Strip"
msgstr "Бўш жойларни олиб ташлаш"
#: management/kmwpassword.cpp:37
msgid "User Identification"
msgstr ""
#: management/kmwpassword.cpp:43
msgid ""
"<p>This backend may require a login/password to work properly. Select the "
"type of access to use and fill in the login and password entries if needed.</"
"p>"
msgstr ""
#: management/kmwpassword.cpp:49
msgid "&Login:"
msgstr "&Фойдаланувчи:"
#: management/kmwpassword.cpp:53
msgid "&Anonymous (no login/password)"
msgstr ""
#: management/kmwpassword.cpp:54
msgid "&Guest account (login=\"guest\")"
msgstr "&Меҳмон ҳисоби (фойдаланувчи=\"guest\")"
#: management/kmwpassword.cpp:55
msgid "Nor&mal account"
msgstr "&Оддий ҳисоб"
#: management/kmwpassword.cpp:88
msgid "Select one option"
msgstr "Битта параметрни танланг"
#: management/kmwpassword.cpp:90
msgid "User name is empty."
msgstr "Фойдаланувчи кўрсатилмаган."
#: management/kmwsmb.cpp:35
msgid "SMB Printer Settings"
msgstr "SMB принтер мосламалари"
#: management/kmwsmb.cpp:41
msgid "Scan"
msgstr "Скан қилиш"
#: management/kmwsmb.cpp:42
msgid "Abort"
msgstr "Тўхтатиш"
#: management/kmwsmb.cpp:44
msgid "Workgroup:"
msgstr "Ишчи гуруҳ:"
#: management/kmwsmb.cpp:45
msgid "Server:"
msgstr "Сервер:"
#: management/kmwsmb.cpp:46 tools/escputil/escpwidget.cpp:99
msgid "Printer:"
msgstr "Принтер:"
#: management/kmwsmb.cpp:81 rlpr/kmrlprmanager.cpp:45
msgid "Empty printer name."
msgstr "Принтернинг номи кўрсатилмаган."
#: management/kmwsmb.cpp:99
#, c-format
msgid "Login: %1"
msgstr "Фойдаланувчи: %1"
#: management/kmwsmb.cpp:99
msgid "<anonymous>"
msgstr ""
#: management/kmwsocket.cpp:38
msgid "Network Printer Information"
msgstr "Тармоқдаги принтер ҳақида маълумот"
#: management/kmwsocket.cpp:48
msgid "&Printer address:"
msgstr "Принтернинг ман&зили:"
#: management/kmwsocket.cpp:49
msgid "P&ort:"
msgstr "П&орт:"
#: management/kmwsocket.cpp:99
msgid "You must enter a printer address."
msgstr "Принтернинг манзилини киритишингиз шарт."
#: management/kmwsocket.cpp:110
msgid "Wrong port number."
msgstr "Портнинг рақами нотўғри."
#: management/kmwsocketutil.cpp:52 management/networkscanner.cpp:338
msgid "&Subnetwork:"
msgstr ""
#: management/kmwsocketutil.cpp:54 management/networkscanner.cpp:340
msgid "&Timeout (ms):"
msgstr "&Таймаут (мс):"
#: management/kmwsocketutil.cpp:92 management/networkscanner.cpp:378
msgid "Scan Configuration"
msgstr "Скан қилишни мослаш"
#: management/kmwsocketutil.cpp:104 management/kmwsocketutil.cpp:110
#: management/networkscanner.cpp:390 management/networkscanner.cpp:396
msgid "Wrong subnetwork specification."
msgstr ""
#: management/kmwsocketutil.cpp:118 management/networkscanner.cpp:404
msgid "Wrong timeout specification."
msgstr ""
#: management/kmwsocketutil.cpp:121 management/networkscanner.cpp:407
msgid "Wrong port specification."
msgstr ""
#: management/kxmlcommanddlg.cpp:108
msgid "Integer"
msgstr "Бутун сон"
#: management/kxmlcommanddlg.cpp:109
msgid "Float"
msgstr ""
#: management/kxmlcommanddlg.cpp:110
msgid "List"
msgstr "Рўйхат"
#: management/kxmlcommanddlg.cpp:118
msgid "Default &value:"
msgstr "Андоза &қиймати:"
#: management/kxmlcommanddlg.cpp:119
msgid "Co&mmand:"
msgstr "Буй&руқ:"
#: management/kxmlcommanddlg.cpp:126
msgid "&Persistent option"
msgstr ""
#: management/kxmlcommanddlg.cpp:128
msgid "Va&lues"
msgstr "Қ&ийматлар"
#: management/kxmlcommanddlg.cpp:136
msgid "Minimum v&alue:"
msgstr "Энг &кичик қиймати:"
#: management/kxmlcommanddlg.cpp:137
msgid "Ma&ximum value:"
msgstr "Энг к&атта қиймати:"
#: management/kxmlcommanddlg.cpp:150
msgid "Add value"
msgstr "Қийматни қўшиш"
#: management/kxmlcommanddlg.cpp:151
msgid "Delete value"
msgstr "Қийматни ўчириш"
#: management/kxmlcommanddlg.cpp:153
msgid "Apply changes"
msgstr "Ўзгаришларни қўллаш"
#: management/kxmlcommanddlg.cpp:154
msgid "Add group"
msgstr "Гуруҳни қўшиш"
#: management/kxmlcommanddlg.cpp:155
msgid "Add option"
msgstr "Параметрни қўшиш"
#: management/kxmlcommanddlg.cpp:156
msgid "Delete item"
msgstr "Элементни ўчириш"
#: management/kxmlcommanddlg.cpp:157 tdefilelist.cpp:135
msgid "Move up"
msgstr "Юқорига"
#: management/kxmlcommanddlg.cpp:158 tdefilelist.cpp:142
msgid "Move down"
msgstr "Пастга"
#: management/kxmlcommanddlg.cpp:162
msgid "&Input From"
msgstr "&Кириш"
#: management/kxmlcommanddlg.cpp:163
msgid "O&utput To"
msgstr "&Чиқиш"
#: management/kxmlcommanddlg.cpp:164 management/kxmlcommanddlg.cpp:166
msgid "File:"
msgstr "Файл:"
#: management/kxmlcommanddlg.cpp:165 management/kxmlcommanddlg.cpp:167
msgid "Pipe:"
msgstr ""
#: management/kxmlcommanddlg.cpp:285
msgid ""
"An identification string. Use only alphanumeric characters except spaces. "
"The string <b>__root__</b> is reserved for internal use."
msgstr ""
#: management/kxmlcommanddlg.cpp:289
msgid ""
"A description string. This string is shown in the interface, and should be "
"explicit enough about the role of the corresponding option."
msgstr ""
#: management/kxmlcommanddlg.cpp:293
msgid ""
"The type of the option. This determines how the option is presented "
"graphically to the user."
msgstr ""
#: management/kxmlcommanddlg.cpp:297
msgid ""
"The format of the option. This determines how the option is formatted for "
"inclusion in the global command line. The tag <b>%value</b> can be used to "
"represent the user selection. This tag will be replaced at run-time by a "
"string representation of the option value."
msgstr ""
#: management/kxmlcommanddlg.cpp:303
msgid ""
"The default value of the option. For non persistent options, nothing is "
"added to the command line if the option has that default value. If this "
"value does not correspond to the actual default value of the underlying "
"utility, make the option persistent to avoid unwanted effects."
msgstr ""
#: management/kxmlcommanddlg.cpp:309
msgid ""
"Make the option persistent. A persistent option is always written to the "
"command line, whatever its value. This is useful when the chosen default "
"value does not match with the actual default value of the underlying utility."
msgstr ""
#: management/kxmlcommanddlg.cpp:313
#, c-format
msgid ""
"The full command line to execute the associated underlying utility. This "
"command line is based on a mechanism of tags that are replaced at run-time. "
"The supported tags are:<ul><li><b>%filterargs</b>: command options</"
"li><li><b>%filterinput</b>: input specification</li><li><b>%filteroutput</"
"b>: output specification</li><li><b>%psu</b>: the page size in upper case</"
"li><li><b>%psl</b>: the page size in lower case</li></ul>"
msgstr ""
#: management/kxmlcommanddlg.cpp:323
#, c-format
msgid ""
"Input specification when the underlying utility reads input data from a "
"file. Use the tag <b>%in</b> to represent the input filename."
msgstr ""
#: management/kxmlcommanddlg.cpp:327
#, c-format
msgid ""
"Output specification when the underlying utility writes output data to a "
"file. Use the tag <b>%out</b> to represent the output filename."
msgstr ""
#: management/kxmlcommanddlg.cpp:331
msgid ""
"Input specification when the underlying utility reads input data from its "
"standard input."
msgstr ""
#: management/kxmlcommanddlg.cpp:335
msgid ""
"Output specification when the underlying utility writes output data to its "
"standard output."
msgstr ""
#: management/kxmlcommanddlg.cpp:339
msgid ""
"A comment about the underlying utility, which can be viewed by the user from "
"the interface. This comment string supports basic HTML tags like &lt;a&gt;, "
"&lt;b&gt; or &lt;i&gt;."
msgstr ""
#: management/kxmlcommanddlg.cpp:568
msgid ""
"Invalid identification name. Empty strings and \"__root__\" are not allowed."
msgstr ""
#: management/kxmlcommanddlg.cpp:649 management/kxmlcommanddlg.cpp:652
msgid "New Group"
msgstr "Янги гуруҳ"
#: management/kxmlcommanddlg.cpp:668 management/kxmlcommanddlg.cpp:671
msgid "New Option"
msgstr "Янги параметр"
#: management/kxmlcommanddlg.cpp:795 management/kxmlcommanddlg.cpp:939
#, c-format
msgid "Command Edit for %1"
msgstr ""
#: management/kxmlcommanddlg.cpp:833
msgid "&Mime Type Settings"
msgstr "MIME турининг &мосламалари"
#: management/kxmlcommanddlg.cpp:839
msgid "Supported &Input Formats"
msgstr ""
#: management/kxmlcommanddlg.cpp:851
msgid "&Edit Command..."
msgstr "&Буйруқни таҳрирлаш"
#: management/kxmlcommanddlg.cpp:868
msgid "Output &format:"
msgstr "&Натижа формати:"
#: management/kxmlcommanddlg.cpp:870
msgid "ID name:"
msgstr ""
#: management/kxmlcommanddlg.cpp:1033
msgid "exec:/"
msgstr "exec:/"
#: management/kxmlcommandselector.cpp:54
msgid "New command"
msgstr "Янги буйруқ"
#: management/kxmlcommandselector.cpp:55
msgid "Edit command"
msgstr "Буйруқни таҳрирлаш"
#: management/kxmlcommandselector.cpp:72
msgid "&Browse..."
msgstr "&Танлаш"
#: management/kxmlcommandselector.cpp:73
msgid "Use co&mmand:"
msgstr "Буй&руқдан фойдаланиш:"
#: management/kxmlcommandselector.cpp:174
msgid "Command Name"
msgstr "Буйруқнинг номи"
#: management/kxmlcommandselector.cpp:174
msgid "Enter an identification name for the new command:"
msgstr ""
#: management/kxmlcommandselector.cpp:183
msgid ""
"A command named %1 already exists. Do you want to continue and edit the "
"existing one?"
msgstr ""
"%1 номли буйруқ аллақачон мавжуд. Давом этишни ва мавжуд бўлган буйруқни "
"таҳрирлашни истайсизми?"
#: management/kxmlcommandselector.cpp:220
msgid "Internal error. The XML driver for the command %1 could not be found."
msgstr "Ички хато: %1 буйруғи учун XML драйвери топилмади."
#: management/kxmlcommandselector.cpp:238
msgid "output"
msgstr "чиқиш"
#: management/kxmlcommandselector.cpp:242
msgid "undefined"
msgstr "ноаниқ"
#: management/kxmlcommandselector.cpp:247
msgid "not allowed"
msgstr "мумкин эмас"
#: management/kxmlcommandselector.cpp:253
msgid "(Unavailable: requirements not satisfied)"
msgstr ""
#: management/networkscanner.cpp:104 management/networkscanner.cpp:184
msgid "Sc&an"
msgstr "&Скан қилиш"
#: management/networkscanner.cpp:111
msgid "Network scan:"
msgstr "Тармоқни скан қилиш:"
#: management/networkscanner.cpp:112 management/networkscanner.cpp:299
#: management/networkscanner.cpp:310
#, c-format
msgid "Subnet: %1"
msgstr ""
#: management/networkscanner.cpp:161
msgid ""
"You are about to scan a subnet (%1.*) that does not correspond to the "
"current subnet of this computer (%2.*). Do you want to scan the specified "
"subnet anyway?"
msgstr ""
#: management/networkscanner.cpp:164
msgid "&Scan"
msgstr "&Скан қилиш"
#: management/smbview.cpp:44
msgid "Comment"
msgstr "Изоҳ"
#: management/tdeprint_management_module.cpp:48
msgid "Select Command"
msgstr "Буйруқни танлаш"
#: marginpreview.cpp:135
msgid "No preview available"
msgstr "Кўриб чиқишни иложи йўқ"
#: marginwidget.cpp:37
msgid ""
" <qt> <p><b>Top Margin</b></p>. <p>This spinbox/text edit field lets you "
"control the top margin of your printout if the printing application does "
"not define its margins internally. </p> <p>The setting works for instance "
"for ASCII text file printing, or for printing from KMail and and "
"Konqueror.. </p> <p><b>Note:</b></p>This margin setting is not intended for "
"KOffice or OpenOffice.org printing, because these applications (or rather "
"their users) are expected to do it by themselves. It also does not work for "
"PostScript or PDF file, which in most cases have their margins hardcoded "
"internally.</p> <br> <hr> <p><em><b>Additional hint for power users:</b> "
"This TDEPrint GUI element matches with the CUPS commandline job option "
"parameter:</em> <pre> -o page-top=... # use values from \"0\" or "
"higher. \"72\" is equal to 1 inch. </pre> </p> </qt>"
msgstr ""
#: marginwidget.cpp:57
msgid ""
" <qt> <p><b>Bottom Margin</b></p>. <p>This spinbox/text edit field lets "
"you control the bottom margin of your printout if the printing application "
"does not define its margins internally. </p> <p>The setting works for "
"instance for ASCII text file printing, or for printing from KMail and and "
"Konqueror. </p> <p><b>Note:</b></p>This margin setting is not intended for "
"KOffice or OpenOffice.org printing, because these applications (or rather "
"their users) are expected to do it by themselves. It also does not work for "
"PostScript or PDF file, which in most cases have their margins hardcoded "
"internally.</p> <br> <hr> <p><em><b>Additional hint for power users:</b> "
"This TDEPrint GUI element matches with the CUPS commandline job option "
"parameter:</em> <pre> -o page-bottom=... # use values from \"0\" or "
"higher. \"72\" is equal to 1 inch. </pre> </qt>"
msgstr ""
#: marginwidget.cpp:76
msgid ""
" <qt> <p><b>Left Margin</b></p>. <p>This spinbox/text edit field lets you "
"control the left margin of your printout if the printing application does "
"not define its margins internally. </p> <p>The setting works for instance "
"for ASCII text file printing, or for printing from KMail and and Konqueror. "
"</p> <p><b>Note:</b></p>This margin setting is not intended for KOffice or "
"OpenOffice.org printing, because these applications (or rather their users) "
"are expected to do it by themselves. It also does not work for PostScript "
"or PDF file, which in most cases have their margins hardcoded internally.</"
"p> <br> <hr> <p><em><b>Additional hint for power users:</b> This TDEPrint "
"GUI element matches with the CUPS commandline job option parameter:</em> "
"<pre> -o page-left=... # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch. </pre> </qt>"
msgstr ""
#: marginwidget.cpp:95
msgid ""
" <qt> <p><b>Right Margin</b></p>. <p>This spinbox/text edit field lets you "
"control the right margin of your printout if the printing application does "
"not define its margins internally. </p> <p>The setting works for instance "
"for ASCII text file printing, or for printing from KMail and and Konqueror. "
"</p> <p><b>Note:</b></p>This margin setting is not intended for KOffice or "
"OpenOffice.org printing, because these applications (or rather their users) "
"are expected to do it by themselves. It also does not work for PostScript "
"or PDF file, which in most cases have their margins hardcoded internally.</"
"p> <br> <hr> <p><em><b>Additional hint for power users:</b> This TDEPrint "
"GUI element matches with the CUPS commandline job option parameter:</em> "
"<pre> -o page-right=... # use values from \"0\" or higher. \"72\" is "
"equal to 1 inch. </pre> </qt>"
msgstr ""
#: marginwidget.cpp:114
msgid ""
" <qt> <p><b>Change Measurement Unit<b></p>. <p>You can change the units of "
"measurement for the page margins here. Select from Millimeter, Centimeter, "
"Inch or Pixels (1 pixel == 1/72 inch). </p> </qt>"
msgstr ""
#: marginwidget.cpp:121
msgid ""
" <qt> <p><b>Custom Margins Checkbox</b></p>. <p>Enable this checkbox if "
"you want to modify the margins of your printouts <p>You can change margin "
"settings in 4 ways: <ul> <li>Edit the text fields. </li> <li>Click "
"spinbox arrows. </li> <li>Scroll wheel of wheelmouses. </li> <li>Drag "
"margins in preview frame with mouse. </li> </ul> <b>Note:</b> The margin "
"setting does not work if you load such files directly into kprinter, which "
"have their print margins hardcoded internally, like as most PDF or "
"PostScript files. It works for all ASCII text files however. It also may "
"not work with non-TDE applications which fail to fully utilize the "
"TDEPrint framework, such as OpenOffice.org. </p> </qt>"
msgstr ""
#: marginwidget.cpp:138
msgid ""
" <qt> <p><b>\"Drag-your-Margins\" </p>. <p>Use your mouse to drag and set "
"each margin on this little preview window. </p> </qt>"
msgstr ""
#: marginwidget.cpp:148
msgid "&Use custom margins"
msgstr ""
#: marginwidget.cpp:158
msgid "&Top:"
msgstr "&Юқоридан:"
#: marginwidget.cpp:159
msgid "&Bottom:"
msgstr "&Пастдан:"
#: marginwidget.cpp:160
msgid "Le&ft:"
msgstr "&Чапдан:"
#: marginwidget.cpp:161
msgid "&Right:"
msgstr "Ўн&гдан:"
#: marginwidget.cpp:164
msgid "Pixels (1/72nd in)"
msgstr ""
#: marginwidget.cpp:167
msgid "Inches (in)"
msgstr "Дюйм (дм)"
#: marginwidget.cpp:168
msgid "Centimeters (cm)"
msgstr "Сантиметр (см)"
#: marginwidget.cpp:169
msgid "Millimeters (mm)"
msgstr "Миллиметр (мм)"
#: plugincombobox.cpp:33
msgid ""
" <qt><b>Print Subsystem Selection</b> <p>This combo box shows (and lets you "
"select) a print subsystem to be used by TDEPrint. (This print subsystem "
"must, of course, be installed inside your Operating System.) TDEPrint "
"usually auto-detects the correct print subsystem by itself upon first "
"startup. Most Linux distributions have \"CUPS\", the <em>Common UNIX "
"Printing System</em>. </qt>"
msgstr ""
#: plugincombobox.cpp:45
msgid "Print s&ystem currently used:"
msgstr "&Фойдаланилаётган босиб чиқариш тизими:"
#: plugincombobox.cpp:91
msgid ""
" <qt><b>Current Connection</b> <p>This line shows which CUPS server your PC "
"is currently connected to for printing and retrieving printer info. To "
"switch to a different CUPS server, click \"System Options\", then select "
"\"Cups server\" and fill in the required info. </qt>"
msgstr ""
#: posterpreview.cpp:115
msgid ""
"Poster preview not available. Either the <b>poster</b> executable is not "
"properly installed, or you don't have the required version"
msgstr ""
#: ppdloader.cpp:232
msgid "(line %1): "
msgstr ""
#: rlpr/kmconfigproxy.cpp:29
msgid "Proxy"
msgstr "Прокси"
#: rlpr/kmconfigproxy.cpp:30
msgid "RLPR Proxy Server Settings"
msgstr "RLPR прокси серверининг мосламалари"
#: rlpr/kmproprlpr.cpp:49 rlpr/kmwrlpr.cpp:50
msgid "Remote LPD Queue Settings"
msgstr "Масофадаги LPD навбат мосламалари"
#: rlpr/kmproxywidget.cpp:32
msgid "Proxy Settings"
msgstr "Прокси мосламалари"
#: rlpr/kmproxywidget.cpp:36
msgid "&Use proxy server"
msgstr "&Прокси серверидан фойдаланиш"
#: rlpr/kmrlprmanager.cpp:47 rlpr/kmwrlpr.cpp:85
msgid "Empty host name."
msgstr "Компьютернинг номи кўрсатилмаган."
#: rlpr/kmrlprmanager.cpp:49 rlpr/kmwrlpr.cpp:87
msgid "Empty queue name."
msgstr "Навбатнинг номи кўрсатилмаган."
#: rlpr/kmrlprmanager.cpp:63
msgid "Printer not found."
msgstr "Принтер топилмади."
#: rlpr/kmrlprmanager.cpp:75
msgid "Not implemented yet."
msgstr "Ҳали амалга оширилмаган."
#: rlpr/kmwrlpr.cpp:124
msgid "Remote queue %1 on %2"
msgstr "%2'да жойлашган масофадаги навбат %1"
#: rlpr/kmwrlpr.cpp:199
msgid "No Predefined Printers"
msgstr "Олдиндан аниқланган принтер йўқ"
#: rlpr/krlprprinterimpl.cpp:73
msgid "The printer is incompletely defined. Try to reinstall it."
msgstr "Принтер тўлиқ аниқланмаган. Қайтадан ўрнатиб кўринг."
#: tdefilelist.cpp:42
msgid ""
" <qt> <b>Add File button</b> <p>This button calls the <em>'File Open'</em> "
"dialog to let you select a file for printing. Note, that <ul><li>you can "
"select ASCII or International Text, PDF, PostScript, JPEG, TIFF, PNG, GIF "
"and many other graphic formats. <li>you can select various files from "
"different paths and send them as one \"multi-file job\" to the printing "
"system. </ul> </qt>"
msgstr ""
#: tdefilelist.cpp:54
msgid ""
" <qt> <b>Remove File button</b> <p>This button removes the highlighted file "
"from the list of to-be-printed files. </qt>"
msgstr ""
#: tdefilelist.cpp:59
msgid ""
" <qt> <b>Move File Up button</b> <p>This button moves the highlighted file "
"up in the list of files to be printed.</p> <p>In effect, this changes the "
"order of the files' printout.</p> </qt>"
msgstr ""
#: tdefilelist.cpp:66
msgid ""
" <qt> <b>Move File Down button</b> <p>This button moves the highlighted file "
"down in the list of files to be printed.</p> <p>In effect, this changes the "
"order of the files' printout.</p> </qt>"
msgstr ""
#: tdefilelist.cpp:73
msgid ""
" <qt> <b>File Open button</b> <p>This button tries to open the highlighted "
"file, so you can view or edit it before you send it to the printing system.</"
"p> <p>If you open files, TDEPrint will use the application matching the MIME "
"type of the file.</p> </qt>"
msgstr ""
#: tdefilelist.cpp:82
msgid ""
" <qt> <b>File List view</b> <p>This list displays all the files you selected "
"for printing. You can see the file name(s), file path(s) and the file (MIME) "
"type(s) as determined by TDEPrint. You may re-arrange the initial order of "
"the list with the help of the arrow buttons on the right.</p> <p>The files "
"will be printed as a single job, in the same order as displayed in the list."
"</p> <p><b>Note:</b> You can select multiple files. The files may be in "
"multiple locations. The files may be of multiple MIME types. The buttons on "
"the right side let you add more files, remove already selected files from "
"the list, re-order the list (by moving files up or down), and open files. "
"If you open files, TDEPrint will use the application matching the MIME type "
"of the file.</p> </qt>"
msgstr ""
#: tdefilelist.cpp:103
msgid "Path"
msgstr "Йўл"
#: tdefilelist.cpp:115
msgid "Add file"
msgstr "Файлни қўшиш"
#: tdefilelist.cpp:121
msgid "Remove file"
msgstr "Файлни олиб ташлаш"
#: tdefilelist.cpp:128
msgid "Open file"
msgstr "Файлни очиш"
#: tdefilelist.cpp:149
msgid ""
"Drag file(s) here or use the button to open a file dialog. Leave empty for "
"<b>&lt;STDIN&gt;</b>."
msgstr ""
#: tdeprintd.cpp:176
msgid ""
"Some of the files to print are not readable by the TDE print daemon. This "
"may happen if you are trying to print as a different user to the one "
"currently logged in. To continue printing, you need to provide root's "
"password."
msgstr ""
#: tdeprintd.cpp:181
msgid "Provide root's Password"
msgstr "root'нинг махфий сўзини киритинг"
#: tdeprintd.cpp:200 tdeprintd.cpp:202
#, c-format
msgid "Printing Status - %1"
msgstr "Босиб чиқаришнинг ҳолати - %1"
#: tdeprintd.cpp:263
msgid "Printing system"
msgstr "Босиб чиқариш сисемаси"
#: tdeprintd.cpp:266
msgid "Authentication failed (user name=%1)"
msgstr "Тасдиқлаш муваффақиятсиз тугади (фойдаланувчи=%1)"
#: tools/escputil/escpwidget.cpp:45
msgid "EPSON InkJet Printer Utilities"
msgstr "EPSON InkJet принтерининг утилиталари"
#: tools/escputil/escpwidget.cpp:91
msgid "&Use direct connection (might need root permissions)"
msgstr ""
"&Тўғридан-тўғри алоқадан фойдаланиш (root'нинг рухсати керак бўлиши мумкин)"
#: tools/escputil/escpwidget.cpp:103
msgid "Clea&n print head"
msgstr "Принтернинг каллачасини &тозалаш"
#: tools/escputil/escpwidget.cpp:104
msgid "&Print a nozzle test pattern"
msgstr ""
#: tools/escputil/escpwidget.cpp:105
msgid "&Align print head"
msgstr "Принтернинг каллачасини те&кислаш"
#: tools/escputil/escpwidget.cpp:106
msgid "&Ink level"
msgstr "&Сиёҳнинг даражаси"
#: tools/escputil/escpwidget.cpp:107
msgid "P&rinter identification"
msgstr ""
#: tools/escputil/escpwidget.cpp:153
msgid "Internal error: no device set."
msgstr "Ички хато: ускуна ўрнатилмаган."
#: tools/escputil/escpwidget.cpp:164
#, c-format
msgid "Unsupported connection type: %1"
msgstr "Уланишнинг қўлланмаган тури:%1"
#: tools/escputil/escpwidget.cpp:171
msgid ""
"An escputil process is still running. You must wait until its completion "
"before continuing."
msgstr ""
"escputil жараёни ҳали давом этаяпти. Давом этишдан олдин унинг якунини "
"кутишингиз шарт."
#: tools/escputil/escpwidget.cpp:179
msgid ""
"The executable escputil cannot be found in your PATH environment variable. "
"Make sure gimp-print is installed and that escputil is in your PATH."
msgstr ""
"escputil буйруғи сизнинг $PATH муҳит ўзгарувчингизда кўрсатилган "
"директориялар ичида топилмади. Gimp-print ўрнатилганлигини ва escputil "
"жойлашган директория сизнинг $PATH муҳит ўзгарувчингизда кўрсатилганлигини "
"текширинг."
#: tools/escputil/escpwidget.cpp:204
msgid "Internal error: unable to start escputil process."
msgstr "Ички хато: escputil дастурини ишга тушириб бўлмади."
#: tools/escputil/escpwidget.cpp:214
msgid "Operation terminated with errors."
msgstr "Амал хатолар билан тугади."
#: util.h:64
msgid "Envelope C5"
msgstr ""
#: util.h:65
msgid "Envelope DL"
msgstr ""
#: util.h:66
msgid "Envelope US #10"
msgstr ""
#: util.h:67
msgid "Executive"
msgstr ""
#: kprintpreviewui.rc:13
#, no-c-format
msgid "&PageMarks"
msgstr "Бет &белгилари"
#, fuzzy
#~ msgid "Orientation"
#~ msgstr "&Жойлашиши"
#, fuzzy
#~ msgid "Print"
#~ msgstr "&Босиб чиқариш"
#, fuzzy
#~ msgid "Cancel"
#~ msgstr "Бекор қилинди"
#, fuzzy
#~ msgid "Fonts"
#~ msgstr "Шрифтлар йўли"
#, fuzzy
#~ msgid "&Remove"
#~ msgstr "&Олиб ташлаш"
#, fuzzy
#~ msgid "Configure"
#~ msgstr "%1 мосламаси"
#, fuzzy
#~ msgid "Remove"
#~ msgstr "&Олиб ташлаш"
#, fuzzy
#~ msgid "Show &Toolbar"
#~ msgstr "Мен&юлар панелини кўрсатиш"
#, fuzzy
#~ msgid "Add"
#~ msgstr "&Қўшиш"
#, fuzzy
#~ msgid "Information"
#~ msgstr "Тасдиқлаш"
#, fuzzy
#~ msgid "Properties"
#~ msgstr "&Хоссалари"
#, fuzzy
#~ msgid "&Settings"
#~ msgstr "Мосламалар"
#, fuzzy
#~ msgid "File"
#~ msgstr "Файл:"
#, fuzzy
#~ msgid "&File"
#~ msgstr "&Файллар"
#~ msgid "%1 &Handbook"
#~ msgstr "%1 учун қўллан&ма"
#~ msgid "%1 &Web Site"
#~ msgstr "%1 &веб-сайт"
#~ msgid "Documentation"
#~ msgstr "Қўлланмалар"