You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tde-i18n/tde-i18n-nb/messages/tdevelop/tdevelop.po

31101 lines
884 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# translation of tdevelop.po to Norwegian Bokmål
# Bjørn Steensrud <bjornst@powertech.no>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: tdevelop\n"
"POT-Creation-Date: 2014-11-05 10:17-0600\n"
"PO-Revision-Date: 2007-04-27 14:37+0200\n"
"Last-Translator: Bjørn Steensrud <bjornst@powertech.no>\n"
"Language-Team: Norwegian Bokmål <i18n-nb@lister.ping.uio.no>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"
#. i18n: file ./parts/filelist/kdevfilelist.rc line 8
#: rc.cpp:9
#, fuzzy, no-c-format
msgid "View Sessions"
msgstr "Økt"
#. i18n: file ./parts/filelist/kdevfilelist.rc line 18
#: rc.cpp:12 rc.cpp:198
#, fuzzy, no-c-format
msgid "View Sessions Toolbar"
msgstr "Verktøylinje for Fil"
#. i18n: file ./parts/astyle/kdevpart_astyle.rc line 12
#: rc.cpp:15
#, fuzzy, no-c-format
msgid "Astyle Toolbar"
msgstr "Verktøylinje for Fil"
#. i18n: file ./parts/tools/kdevpart_tools.rc line 11
#: rc.cpp:21 rc.cpp:78 rc.cpp:111
#, no-c-format
msgid "Tools Toolbar"
msgstr "Verktøy-verktøylinje"
#. i18n: file ./parts/distpart/kdevpart_distpart.rc line 4
#: rc.cpp:27 rc.cpp:51 rc.cpp:87 rc.cpp:123 rc.cpp:162
#, no-c-format
msgid "&Project"
msgstr "&Prosjekt"
#. i18n: file ./parts/classview/kdevclassview.rc line 14
#: rc.cpp:30 rc.cpp:147 rc.cpp:189
#, no-c-format
msgid "Browser Toolbar"
msgstr "Verktøylinje for fremviser"
#. i18n: file ./parts/valgrind/kdevpart_valgrind.rc line 4
#: rc.cpp:36 rc.cpp:168 rc.cpp:201 rc.cpp:270
#, no-c-format
msgid "&Debug"
msgstr "&Avlus"
#. i18n: file ./parts/scripting/kdevscripting.rc line 4
#: rc.cpp:42
#, no-c-format
msgid "S&cripts"
msgstr "S&kripter"
#. i18n: file ./kdevdesigner/designer/kdevdesigner_part.rc line 47
#: kdevdesigner/designer/mainwindow.cpp:3734
#: kdevdesigner/designer/mainwindowactions.cpp:409
#: kdevdesigner/designer/multilineeditorimpl.cpp:130 rc.cpp:57 rc.cpp:93
#, no-c-format
msgid "&Layout"
msgstr "&Utseende"
#. i18n: file ./kdevdesigner/designer/kdevdesigner_part.rc line 64
#: kdevdesigner/designer/mainwindowactions.cpp:937
#: src/simplemainwindow.cpp:714 rc.cpp:63 rc.cpp:99 rc.cpp:135 rc.cpp:177
#, no-c-format
msgid "&Window"
msgstr "&Vindu"
#. i18n: file ./kdevdesigner/designer/kdevdesigner_part.rc line 73
#: rc.cpp:66 rc.cpp:102
#, no-c-format
msgid "File Toolbar"
msgstr "Verktøylinje for Fil"
#. i18n: file ./kdevdesigner/designer/kdevdesigner_part.rc line 79
#: rc.cpp:69 rc.cpp:105
#, no-c-format
msgid "Edit Toolbar"
msgstr "Rediger-verktøylinja"
#. i18n: file ./kdevdesigner/designer/kdevdesigner_part.rc line 101
#: rc.cpp:75 rc.cpp:108
#, no-c-format
msgid "Layout Toolbar"
msgstr "Verktøylinje for utseende"
#. i18n: file ./src/kdevassistantui.rc line 68
#: rc.cpp:126 rc.cpp:165
#, no-c-format
msgid "Bu&ild"
msgstr "&Bygg"
#. i18n: file ./src/kdevassistantui.rc line 143
#: rc.cpp:144 rc.cpp:186
#, no-c-format
msgid "Build Toolbar"
msgstr "Bygge-verktøylinje"
#. i18n: file ./src/kdevassistantui.rc line 159
#: rc.cpp:150 rc.cpp:192
#, no-c-format
msgid "Extra Toolbar"
msgstr "Ekstra verktøylinje"
#. i18n: file ./src/tdevelopui.rc line 182
#: rc.cpp:195 rc.cpp:204 rc.cpp:273
#, no-c-format
msgid "Debugger Toolbar"
msgstr "Feilsøk-verktøylinje"
#. i18n: file ./languages/cpp/app_templates/kde4app/kde4appui.rc line 4
#: rc.cpp:213 rc.cpp:216 rc.cpp:228 rc.cpp:234 rc.cpp:276
#, no-c-format
msgid "&Move"
msgstr "&Flytt"
#. i18n: file ./languages/cpp/app_templates/khello/appui.rc line 4
#: rc.cpp:231 rc.cpp:249 rc.cpp:255 rc.cpp:279 rc.cpp:285
#, no-c-format
msgid "C&ustom"
msgstr "&Selvvalgt"
#. i18n: file ./vcs/subversion/kdevpart_subversion.rc line 5
#: rc.cpp:291 rc.cpp:297 rc.cpp:303
#, no-c-format
msgid "&Version Control"
msgstr "&Versjonskontroll"
#. i18n: file ./vcs/subversion/kdevpart_subversion.rc line 8
#: rc.cpp:294
#, no-c-format
msgid "&Subversion"
msgstr "&Subversion"
#. i18n: file ./vcs/perforce/kdevperforcepart.rc line 9
#: rc.cpp:300
#, no-c-format
msgid "&Perforce"
msgstr "&Perforce"
#. i18n: file ./vcs/cvsservice/kdevcvsservicepart.rc line 9
#: rc.cpp:306
#, no-c-format
msgid "&CVS Service"
msgstr "&CVS-tjeneste"
# | msgid "User"
#. i18n: file ./parts/uimode/uichooser.ui line 16
#: rc.cpp:309
#, fuzzy, no-c-format
msgid "UIChooser"
msgstr "Bruker"
#. i18n: file ./parts/uimode/uichooser.ui line 38
#: rc.cpp:312
#, no-c-format
msgid "Use Tabs"
msgstr "Bruk faner"
#. i18n: file ./parts/uimode/uichooser.ui line 41
#: rc.cpp:315
#, no-c-format
msgid ""
"Some prefer not to have a tab bar and switch between documents using other "
"means. Kate is one example of this."
msgstr ""
"Noen foretrekker å ikke bruke faner og veksle mellom dokumenter på annen måte. "
"Kate er ett eksempel på dette."
#. i18n: file ./parts/uimode/uichooser.ui line 52
#: rc.cpp:318
#, fuzzy, no-c-format
msgid "Al&ways"
msgstr "Alltid"
#. i18n: file ./parts/uimode/uichooser.ui line 63
#: rc.cpp:321
#, fuzzy, no-c-format
msgid "Ne&ver"
msgstr "Aldri"
#. i18n: file ./parts/uimode/uichooser.ui line 76
#: rc.cpp:324
#, no-c-format
msgid "Use Close on Hover"
msgstr "Bruk Lukk under musepeker"
#. i18n: file ./parts/uimode/uichooser.ui line 79
#: rc.cpp:327
#, no-c-format
msgid ""
"The document tab can optionally be used to close the document, by clicking on "
"the tab icon."
msgstr ""
"Fanen kan også brukes til å lukke dokumentet, ved å trykke på fane-ikonet."
#. i18n: file ./parts/uimode/uichooser.ui line 101
#: kdevdesigner/designer/editfunctionsimpl.cpp:218
#: kdevdesigner/designer/formfile.cpp:330
#: kdevdesigner/designer/formfile.cpp:657
#: kdevdesigner/designer/mainwindow.cpp:2517
#: kdevdesigner/designer/mainwindow.cpp:2847
#: kdevdesigner/designer/mainwindowactions.cpp:1129
#: kdevdesigner/designer/sourcefile.cpp:224
#: kdevdesigner/designer/sourcefile.cpp:269
#: kdevdesigner/designer/variabledialogimpl.cpp:105 rc.cpp:333
#, no-c-format
msgid "&Yes"
msgstr "&Ja"
#. i18n: file ./parts/uimode/uichooser.ui line 121
#: rc.cpp:336
#, no-c-format
msgid "Toolview Tab Layout"
msgstr "Utseende for verktøy-visningsarket"
#. i18n: file ./parts/uimode/uichooser.ui line 124
#: rc.cpp:339
#, no-c-format
msgid ""
"Three different modes for the IDEAl toolview tabs. \"Text and icons\" is the "
"most informative, but takes a lot of space. Those with a smaller screen will "
"typically want \"Icons\"."
msgstr ""
"Tre forskjellige utseende for arkene til IDEAI verktøyvisning. «Tekst og "
"ikoner» gir mest informasjon. men tar mye plass. De som har mindre skjermer vil "
"som regel ha «Ikoner»."
#. i18n: file ./parts/uimode/uichooser.ui line 135
#: rc.cpp:342
#, no-c-format
msgid "Icons"
msgstr "Ikoner"
#. i18n: file ./parts/uimode/uichooser.ui line 143
#: rc.cpp:345
#, fuzzy, no-c-format
msgid "Te&xt"
msgstr "Tekst"
#. i18n: file ./parts/uimode/uichooser.ui line 154
#: rc.cpp:348
#, no-c-format
msgid "Text and icons"
msgstr "Tekst og ikoner"
#. i18n: file ./parts/uimode/uichooser.ui line 164
#: rc.cpp:351
#, no-c-format
msgid "Tabbed Browsing"
msgstr "Surfing med faner"
#. i18n: file ./parts/uimode/uichooser.ui line 167
#: rc.cpp:354
#, no-c-format
msgid "Some extra options for the document tabbar."
msgstr "Noen ekstra valg for dokumentets fanelinje."
#. i18n: file ./parts/uimode/uichooser.ui line 178
#: rc.cpp:357
#, no-c-format
msgid "Open &new tab after current tab"
msgstr "Åpne &ny fane etter gjeldende fane"
#. i18n: file ./parts/uimode/uichooser.ui line 186
#: rc.cpp:360
#, fuzzy, no-c-format
msgid "&Show icons on document tabs"
msgstr "Vis ikoner på dokumentfaner"
#. i18n: file ./parts/uimode/uichooser.ui line 194
#: rc.cpp:363
#, fuzzy, no-c-format
msgid "Show close &button in tab bar"
msgstr "Vis lukke-knapp i fanelinja"
#. i18n: file ./parts/uimode/uichooser.ui line 214
#: rc.cpp:366
#, fuzzy, no-c-format
msgid "Note: Changes will take effect after TDevelop is restarted"
msgstr "Mer: Endringene får virkning etter at KDevelop er startet på nytt"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 16
#: rc.cpp:369
#, no-c-format
msgid "Snippet Settings"
msgstr "Snuttinnstillinger"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 27
#: rc.cpp:372
#, no-c-format
msgid "Tooltips"
msgstr "Verktøytips"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 38
#: rc.cpp:375
#, no-c-format
msgid "Show snippet's text in &tooltip"
msgstr "Vis snuttens tekst i verk&tøytips"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 44
#: rc.cpp:378
#, no-c-format
msgid ""
"Decides if a tooltip should be shown containing text from the bookmarked line"
msgstr "Avgjør om et verktøytips skal vises med tekst fra linja i bokmerket"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 71
#: languages/cpp/debugger/debuggerpart.cpp:120
#: languages/ruby/debugger/debuggerpart.cpp:105 rc.cpp:381
#, no-c-format
msgid "Variables"
msgstr "Variabler"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 82
#: rc.cpp:384
#, no-c-format
msgid "Input Method for Variables"
msgstr "Inndata-metode for variabler"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 93
#: rc.cpp:387
#, no-c-format
msgid "Single dialog for each variable within a snippet"
msgstr "Enkel dialog for hver variabel inne i en snutt"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 102
#: rc.cpp:390
#, no-c-format
msgid "An input dialog will be displayed for every variable within a snippet"
msgstr "Det blir vist en inndata-dialog for hver variabel i en snutt"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 110
#: rc.cpp:393
#, no-c-format
msgid "One dialog for all variables within a snippet"
msgstr "En dialog for alle variabler inne i en snutt"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 119
#: rc.cpp:396
#, no-c-format
msgid ""
"A single dialog will be displayed where you can enter the values for all "
"variables within a snippet"
msgstr ""
"Det blir vist én dialog der verdier for alle variablene i en snutt kan oppgis"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 137
#: rc.cpp:399
#, no-c-format
msgid "Delimiter:"
msgstr "Skilletegn:"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 183
#: rc.cpp:402
#, no-c-format
msgid "Automatically Open Groups"
msgstr "Åpne grupper automatisk"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 194
#: rc.cpp:405
#, no-c-format
msgid "The group's language is the project's primary language"
msgstr "Gruppens språk er prosjektets hovedspråk"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 200
#: rc.cpp:408
#, no-c-format
msgid ""
"<qt>If the group's language is the same as the project's primary language, the "
"group will be automatically opened.</qt>"
msgstr ""
"<qt>Hvis gruppens språk er det samme som prosjektets hovedspråk, så blir "
"gruppen automatisk åpnet.</qt>"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 208
#: rc.cpp:411
#, no-c-format
msgid "The group's language is supported by the project"
msgstr "Prosjektet støtter gruppens språk"
#. i18n: file ./parts/snippet/snippetsettingsbase.ui line 217
#: rc.cpp:414
#, no-c-format
msgid ""
"<qt>Groups having a language which is supported by the current project will be "
"opened automatically. "
"<br>Even if the group's language is not the same as the project's primary "
"language.</qt>"
msgstr ""
"<qt>Grupper som har et språk det er støtte for i det gjeldende prosjektet blir "
"åpnet automatisk, "
"<br>selv om gruppens språk ikke er det samme som prosjektets hovedspråk.</qt>"
#. i18n: file ./parts/snippet/snippetdlg.ui line 16
#: rc.cpp:417
#, no-c-format
msgid "Add Snippet"
msgstr "Legg til snutt"
#. i18n: file ./parts/snippet/snippetdlg.ui line 52
#: languages/ruby/debugger/variablewidget.cpp:62
#: lib/widgets/propeditor/qeditlistbox.cpp:121 rc.cpp:420 rc.cpp:2628
#: rc.cpp:3018 rc.cpp:3880 rc.cpp:3910 rc.cpp:3974 rc.cpp:4028 rc.cpp:4106
#: rc.cpp:5364 rc.cpp:6463 rc.cpp:7337 rc.cpp:7348 rc.cpp:7370 rc.cpp:7899
#: rc.cpp:8209
#, no-c-format
msgid "&Add"
msgstr "&Legg til"
#. i18n: file ./parts/snippet/snippetdlg.ui line 106
#: buildtools/autotools/addprefixdlg.cpp:29
#: buildtools/lib/widgets/addenvvardlg.cpp:36 rc.cpp:426 rc.cpp:1448
#: rc.cpp:2433 rc.cpp:2538 rc.cpp:2688 rc.cpp:5517 rc.cpp:6363 rc.cpp:6444
#: rc.cpp:7848
#, no-c-format
msgid "&Name:"
msgstr "&Navn:"
#. i18n: file ./parts/snippet/snippetdlg.ui line 117
#: rc.cpp:429
#, no-c-format
msgid "&Snippet:"
msgstr "&Snutt:"
#. i18n: file ./parts/snippet/snippetdlg.ui line 131
#: rc.cpp:432
#, no-c-format
msgid "Group:"
msgstr "Gruppe:"
#. i18n: file ./parts/snippet/snippetdlg.ui line 145
#: rc.cpp:435
#, no-c-format
msgid "Click here to get to know how to use variables in a snippet"
msgstr "Trykk her for å lese om å bruke variabler i en snutt"
#. i18n: file ./parts/filelist/projectviewconfigbase.ui line 16
#: parts/filelist/filelist_widget.cpp:228
#: parts/filelist/projectviewpart.cpp:79 parts/filelist/projectviewpart.cpp:80
#: parts/filelist/projectviewpart.cpp:251
#: parts/filelist/projectviewpart.cpp:265
#: parts/filelist/projectviewpart.cpp:270 rc.cpp:438
#, no-c-format
msgid "File List"
msgstr "Filliste"
#. i18n: file ./parts/filelist/projectviewconfigbase.ui line 27
#: rc.cpp:441
#, fuzzy, no-c-format
msgid "Display toolbar in toolview (note: change needs a restart)"
msgstr ""
"Vis verktø&ylinja i verktøyvisning (merk: denne endringa trenger omstart)"
#. i18n: file ./parts/filelist/projectviewconfigbase.ui line 33
#: rc.cpp:444 rc.cpp:447
#, no-c-format
msgid ""
"Uncheck this if you want the toolbar together with all other toolbars. You can "
"disable it then"
msgstr ""
#. i18n: file ./parts/filelist/projectviewconfigbase.ui line 44
#: rc.cpp:450
#, fuzzy, no-c-format
msgid "Only save project files in a session"
msgstr "Lagre bare prosjektfiler i en visning"
#. i18n: file ./parts/filelist/projectviewconfigbase.ui line 50
#: rc.cpp:453 rc.cpp:456
#, fuzzy, no-c-format
msgid "Check this if you want to ignore files that are not part of the project"
msgstr ""
"Kryss av her hvis du vil at KDevelop skal laste inn det sist lagrede prosjektet "
"ved oppstart."
#. i18n: file ./parts/filelist/projectviewconfigbase.ui line 61
#: rc.cpp:459
#, no-c-format
msgid "Close all open files before opening a session"
msgstr ""
#. i18n: file ./parts/filelist/projectviewconfigbase.ui line 67
#: rc.cpp:462 rc.cpp:465
#, fuzzy, no-c-format
msgid ""
"Check this if you want the currently open files closed before opening a session"
msgstr ""
"Kryss av her om du vil at programmene dine skal åpnes i et terminalvindu."
#. i18n: file ./parts/filelist/projectviewprojectconfigbase.ui line 16
#: rc.cpp:468
#, no-c-format
msgid "Projectviews"
msgstr "Prosjektvisninger"
#. i18n: file ./parts/filelist/projectviewprojectconfigbase.ui line 35
#: rc.cpp:471
#, fuzzy, no-c-format
msgid "Open this session after project load:"
msgstr "Åpne denne visningen etter at prosjektet er lastet inn:"
#. i18n: file ./parts/filelist/projectviewprojectconfigbase.ui line 51
#: rc.cpp:474
#, fuzzy, no-c-format
msgid "select a session"
msgstr "Velg tilgang"
#. i18n: file ./parts/quickopen/quickopenbase.ui line 16
#: rc.cpp:477
#, no-c-format
msgid "Quick Open"
msgstr "Rask åpning"
#. i18n: file ./parts/quickopen/quickopenbase.ui line 30
#: rc.cpp:480
#, no-c-format
msgid "[NAME]"
msgstr "[NAVN]"
#. i18n: file ./parts/quickopen/quickopenbase.ui line 41
#: rc.cpp:483
#, no-c-format
msgid "[ITEM LIST]"
msgstr "[ELEMENTLISTE]"
#. i18n: file ./parts/quickopen/quickopenfunctionchooseformbase.ui line 86
#: rc.cpp:498 rc.cpp:2685
#, no-c-format
msgid "File name:"
msgstr "Filnavn:"
#. i18n: file ./parts/quickopen/quickopenfunctionchooseformbase.ui line 142
#: rc.cpp:501
#, no-c-format
msgid "Function arguments list:"
msgstr "Funksjonens argumentliste:"
#. i18n: file ./parts/bookmarks/bookmarks_settings_base.ui line 24
#: rc.cpp:504
#, no-c-format
msgid "Code Tooltip"
msgstr "Kode-verktøytips"
#. i18n: file ./parts/bookmarks/bookmarks_settings_base.ui line 27
#: rc.cpp:507
#, no-c-format
msgid ""
"If checked, a tooltip will be shown when the mouse is over the bookmark, "
"containing the text in the area surrounding it. "
"<p> How many surrounding lines to include is decided by the value in the "
"context box."
msgstr ""
"Hvis dette er krysset av blir det vist et verktøytips når musepekeren er over "
"bokmerket, som inneholder tekst i området rundt bokmerket. "
"<p> Hvor mange nærliggende linjer som vises avgjøres av tallet i "
"kontekst-boksen."
#. i18n: file ./parts/bookmarks/bookmarks_settings_base.ui line 38
#: rc.cpp:510
#, no-c-format
msgid "Show code &tooltip"
msgstr "Vis kode-verk&tøytips"
#. i18n: file ./parts/bookmarks/bookmarks_settings_base.ui line 63
#: rc.cpp:513
#, no-c-format
msgid "&Lines of context:"
msgstr "&Linjer med kontekst:"
#. i18n: file ./parts/bookmarks/bookmarks_settings_base.ui line 115
#: rc.cpp:516
#, no-c-format
msgid "Show Bookmarked Codeline in Bookmark Panel"
msgstr "Vis bokmerket kodelinje i bokmerkeruta"
#. i18n: file ./parts/bookmarks/bookmarks_settings_base.ui line 118
#: rc.cpp:519
#, no-c-format
msgid ""
"This decides if the bookmark panel should show the content of the bookmarked "
"line in addition to the line number."
"<p>This can be made optional depending on the start of the line, typically used "
"for only showing lines containing a comment."
msgstr ""
"Dette avgjør om bokmerkeruten skal vise innholdet i den bokmerkede linja i "
"tillegg til linjenummeret. "
"<p> Dette kan gjøres valgfritt avhengig av begynnelsen på linja, som regel "
"brukt til å bare vise linjer som inneholder en kommentar."
#. i18n: file ./parts/bookmarks/bookmarks_settings_base.ui line 129
#: rc.cpp:522
#, no-c-format
msgid "&Never"
msgstr "A&ldri"
#. i18n: file ./parts/bookmarks/bookmarks_settings_base.ui line 151
#: rc.cpp:525
#, no-c-format
msgid "&Only lines beginning with the following string:"
msgstr "Bare linjer s&om begynner med følgende streng:"
#. i18n: file ./parts/bookmarks/bookmarks_settings_base.ui line 189
#: rc.cpp:528
#, no-c-format
msgid "&Always"
msgstr "&Alltid"
#. i18n: file ./parts/bookmarks/bookmarks_settings_base.ui line 192
#: rc.cpp:531
#, no-c-format
msgid "Always show the bookmarked line in addition to the line number"
msgstr "Vis alltid den bokmerkede linja i tillegg til linjenummeret"
#. i18n: file ./parts/vcsmanager/vcsmanagerprojectconfigbase.ui line 27
#: rc.cpp:534
#, no-c-format
msgid "Version control system to use for this project:"
msgstr "Versjonskontrollsystem for dette prosjektet:"
#. i18n: file ./parts/fileview/vcscolorsconfigwidgetbase.ui line 16
#: rc.cpp:537
#, no-c-format
msgid "Colors for VCS Visual Feedback"
msgstr "Farger for visuell tilbakemelding i VCS"
#. i18n: file ./parts/fileview/vcscolorsconfigwidgetbase.ui line 27
#: rc.cpp:540
#, no-c-format
msgid "Colors to Use for Version Control Feedback"
msgstr "Farger i bruk for tilbakemelding fra versjonskontroll"
#. i18n: file ./parts/fileview/vcscolorsconfigwidgetbase.ui line 46
#: rc.cpp:543
#, no-c-format
msgid "&Updated:"
msgstr "&Oppdatert:"
#. i18n: file ./parts/fileview/vcscolorsconfigwidgetbase.ui line 65
#: rc.cpp:546
#, no-c-format
msgid "&Modified:"
msgstr "&Endret:"
#. i18n: file ./parts/fileview/vcscolorsconfigwidgetbase.ui line 84
#: rc.cpp:549
#, no-c-format
msgid "Co&nflict:"
msgstr "Ko&nflikt:"
#. i18n: file ./parts/fileview/vcscolorsconfigwidgetbase.ui line 103
#: rc.cpp:552
#, no-c-format
msgid "&Added:"
msgstr "L&agt til:"
#. i18n: file ./parts/fileview/vcscolorsconfigwidgetbase.ui line 122
#: rc.cpp:555
#, no-c-format
msgid "&Sticky:"
msgstr "Fa&st:"
#. i18n: file ./parts/fileview/vcscolorsconfigwidgetbase.ui line 141
#: rc.cpp:558
#, no-c-format
msgid "&Needs checkout:"
msgstr "Tre&nger utsjekking:"
#. i18n: file ./parts/fileview/vcscolorsconfigwidgetbase.ui line 160
#: rc.cpp:561
#, no-c-format
msgid "&Needs patch:"
msgstr "Tre&nger rettelse:"
#. i18n: file ./parts/fileview/vcscolorsconfigwidgetbase.ui line 179
#: rc.cpp:564
#, no-c-format
msgid "Un&known:"
msgstr "U&kjent:"
#. i18n: file ./parts/fileview/vcscolorsconfigwidgetbase.ui line 198
#: rc.cpp:567
#, no-c-format
msgid "&Default:"
msgstr "Stan&dard:"
#. i18n: file ./parts/fileview/filegroupsconfigwidgetbase.ui line 16
#: parts/fileview/filegroupspart.cpp:46 rc.cpp:570
#, no-c-format
msgid "File Group View"
msgstr "Filgruppevisning"
#. i18n: file ./parts/fileview/filegroupsconfigwidgetbase.ui line 38
#: rc.cpp:573
#, no-c-format
msgid "&Groups in the file view and their corresponding patterns:"
msgstr "&Grupper i filvisningen og tilsvarende mønstre:"
#. i18n: file ./parts/fileview/filegroupsconfigwidgetbase.ui line 47
#: rc.cpp:576 rc.cpp:2006
#, no-c-format
msgid "Group"
msgstr "Gruppe"
#. i18n: file ./parts/fileview/filegroupsconfigwidgetbase.ui line 58
#: rc.cpp:579
#, no-c-format
msgid "Pattern"
msgstr "Mønster"
#. i18n: file ./parts/fileview/filegroupsconfigwidgetbase.ui line 112
#: rc.cpp:582
#, no-c-format
msgid "&Add Group..."
msgstr "&Legg til gruppe …"
#. i18n: file ./parts/fileview/filegroupsconfigwidgetbase.ui line 120
#: rc.cpp:585
#, no-c-format
msgid "&Edit Group..."
msgstr "R&ediger gruppe …"
#. i18n: file ./parts/fileview/filegroupsconfigwidgetbase.ui line 128
#: rc.cpp:588
#, no-c-format
msgid "De&lete Group"
msgstr "S&lett gruppe"
#. i18n: file ./parts/fileview/filegroupsconfigwidgetbase.ui line 153
#: lib/widgets/propeditor/qeditlistbox.cpp:137 rc.cpp:591 rc.cpp:1372
#: rc.cpp:1730 rc.cpp:2868 rc.cpp:2940 rc.cpp:2991 rc.cpp:6469 rc.cpp:8206
#, no-c-format
msgid "Move &Up"
msgstr "Flytt &opp"
#. i18n: file ./parts/fileview/filegroupsconfigwidgetbase.ui line 161
#: lib/widgets/propeditor/qeditlistbox.cpp:141 rc.cpp:594 rc.cpp:1375
#: rc.cpp:1733 rc.cpp:2871 rc.cpp:2943 rc.cpp:2994 rc.cpp:6472 rc.cpp:8203
#, no-c-format
msgid "Move &Down"
msgstr "Flytt &ned"
#. i18n: file ./parts/appwizard/filepropspagebase.ui line 24
#: rc.cpp:597
#, no-c-format
msgid "Customize"
msgstr "Tilpass"
#. i18n: file ./parts/appwizard/filepropspagebase.ui line 35
#: parts/quickopen/quickopenclassdialog.cpp:82 rc.cpp:600 rc.cpp:3280
#, no-c-format
msgid "Class name:"
msgstr "Klassenavn:"
#. i18n: file ./parts/appwizard/filepropspagebase.ui line 48
#: rc.cpp:603
#, no-c-format
msgid "Base class:"
msgstr "Basisklasse:"
#. i18n: file ./parts/appwizard/filepropspagebase.ui line 66
#: rc.cpp:606
#, no-c-format
msgid "Implementation file:"
msgstr "Implementasjonsfil:"
#. i18n: file ./parts/appwizard/filepropspagebase.ui line 74
#: rc.cpp:609
#, no-c-format
msgid "Header file:"
msgstr "Deklarasjonsfil:"
#. i18n: file ./parts/appwizard/filepropspagebase.ui line 89
#: rc.cpp:612
#, no-c-format
msgid "Classes:"
msgstr "Klasser:"
#. i18n: file ./parts/appwizard/filepropspagebase.ui line 97
#: parts/filecreate/addglobaldlg.cpp:103 rc.cpp:615 rc.cpp:6191 rc.cpp:6209
#, no-c-format
msgid "Description:"
msgstr "Beskrivelse:"
#. i18n: file ./parts/appwizard/importdlgbase.ui line 16
#: rc.cpp:618
#, no-c-format
msgid "Import Existing Project"
msgstr "Importer eksisterende prosjekt"
#. i18n: file ./parts/appwizard/importdlgbase.ui line 27
#: parts/filecreate/filecreate_newfile.cpp:41 parts/grepview/grepdlg.cpp:132
#: rc.cpp:621 rc.cpp:8028
#, no-c-format
msgid "&Directory:"
msgstr "&Mappe:"
#. i18n: file ./parts/appwizard/importdlgbase.ui line 65
#: rc.cpp:624
#, no-c-format
msgid "Fetch &Module"
msgstr "Hent &Modul"
#. i18n: file ./parts/appwizard/importdlgbase.ui line 79
#: rc.cpp:627
#, no-c-format
msgid "&Fetch from:"
msgstr "Hent &fra:"
#. i18n: file ./parts/appwizard/importdlgbase.ui line 90
#: rc.cpp:630
#, no-c-format
msgid "Project &name:"
msgstr "Prosjekt&navn:"
#. i18n: file ./parts/appwizard/importdlgbase.ui line 176
#: rc.cpp:639
#, no-c-format
msgid "&Project type:"
msgstr "&Prosjekttype:"
#. i18n: file ./parts/appwizard/importdlgbase.ui line 223
#: rc.cpp:642
#, no-c-format
msgid "&Email:"
msgstr "&E-post:"
#. i18n: file ./parts/appwizard/importdlgbase.ui line 246
#: rc.cpp:645 rc.cpp:652
#, no-c-format
msgid ""
"If there exists a file AUTHOR in the\n"
"directory, and it has email addresses\n"
"formated as XXXX <.....> the XXXX\n"
"will be the author, everything between \n"
"<....> is the email address."
msgstr ""
#. i18n: file ./parts/appwizard/importdlgbase.ui line 291
#: rc.cpp:659
#, no-c-format
msgid "&Author:"
msgstr "Forf&atter:"
#. i18n: file ./parts/appwizard/importdlgbase.ui line 305
#: rc.cpp:662
#, no-c-format
msgid "Generate build system infrastructure"
msgstr "Lag infrastruktur for byggesystemet"
#. i18n: file ./parts/appwizard/vcs_form.ui line 16
#: rc.cpp:665
#, no-c-format
msgid "Vcs Form"
msgstr "Vcs-skjema"
#. i18n: file ./parts/appwizard/vcs_form.ui line 40
#: rc.cpp:668
#, no-c-format
msgid "&Version control system:"
msgstr "&Versjonskontrollsystem:"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 16
#: rc.cpp:671
#, no-c-format
msgid "Create New Project"
msgstr "Opprett nytt prosjekt"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 23
#: languages/cpp/app_templates/kde4app/kapp4.cpp:84
#: languages/cpp/app_templates/kscons_kxt/app.cpp:142
#: languages/cpp/app_templates/kscons_tdemdi/apptdemdi.cpp:322
#: languages/cpp/app_templates/kxt/app.cpp:137
#: languages/cpp/app_templates/tdeconfig35/app.cpp:77
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:580
#: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:50
#: src/kdevideextension.cpp:57 src/projectmanager.cpp:152 rc.cpp:674
#: rc.cpp:4642
#, no-c-format
msgid "General"
msgstr "Generelt"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 38
#: rc.cpp:677
#, no-c-format
msgid "&All Projects"
msgstr "&Alle prosjekter"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 94
#: rc.cpp:680
#, no-c-format
msgid "&Show all project templates"
msgstr "&Vis alle prosjektmaler"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 107
#: rc.cpp:683
#, no-c-format
msgid "&Favorites"
msgstr "&Favoritter"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 193
#: rc.cpp:689
#, no-c-format
msgid "Application &name:"
msgstr "Program&navn:"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 204
#: rc.cpp:692 rc.cpp:1366 rc.cpp:1400 rc.cpp:1451
#, no-c-format
msgid "&Location:"
msgstr "S&ted:"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 215
#: rc.cpp:695
#, no-c-format
msgid "Final location:"
msgstr "Endelig sted:"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 267
#: rc.cpp:698
#, no-c-format
msgid "TextLabel4"
msgstr "TextLabel4"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 321
#: src/projectmanager.cpp:148 rc.cpp:701
#, no-c-format
msgid "Project Options"
msgstr "Prosjektvalg"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 340
#: rc.cpp:704
#, no-c-format
msgid "General Options"
msgstr "Generelle valg"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 359
#: rc.cpp:707 rc.cpp:6215
#, no-c-format
msgid "Author:"
msgstr "Forfatter:"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 370
#: rc.cpp:710 rc.cpp:6218
#, no-c-format
msgid "Email:"
msgstr "E-post:"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 381
#: rc.cpp:713 rc.cpp:6221
#, no-c-format
msgid "Version:"
msgstr "Versjon:"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 444
#: rc.cpp:716
#, no-c-format
msgid "0.1"
msgstr "0.1"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 452
#: rc.cpp:719
#, no-c-format
msgid "License:"
msgstr "Lisens:"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 461
#: kdevdesigner/designer/mainwindowactions.cpp:586
#: parts/appwizard/appwizarddlg.cpp:575 rc.cpp:722
#, no-c-format
msgid "Custom"
msgstr "Tilpasset"
#. i18n: file ./parts/appwizard/appwizarddlgbase.ui line 501
#: rc.cpp:725
#, no-c-format
msgid "Custom Options"
msgstr "Tilpassede valg"
#. i18n: file ./parts/astyle/astyleconfig.ui line 24
#: rc.cpp:728
#, no-c-format
msgid "Artistic Style Configuration"
msgstr "Oppsett for kunstnerisk stil"
#. i18n: file ./parts/astyle/astyleconfig.ui line 47
#: rc.cpp:731 rc.cpp:3024
#, no-c-format
msgid "&General"
msgstr "&Generelt"
#. i18n: file ./parts/astyle/astyleconfig.ui line 78
#: rc.cpp:734
#, no-c-format
msgid "&Style"
msgstr "&Stil"
#. i18n: file ./parts/astyle/astyleconfig.ui line 89
#: rc.cpp:737
#, no-c-format
msgid "&User defined"
msgstr "&Selvvalgt"
#. i18n: file ./parts/astyle/astyleconfig.ui line 98
#: rc.cpp:740
#, fuzzy, no-c-format
msgid "Select options from other tabs."
msgstr "Noen ekstra valg for dokumentets fanelinje."
#. i18n: file ./parts/astyle/astyleconfig.ui line 106
#: rc.cpp:743
#, no-c-format
msgid "&ANSI"
msgstr "&ANSI"
#. i18n: file ./parts/astyle/astyleconfig.ui line 118
#: rc.cpp:746
#, no-c-format
msgid ""
"ANSI style formatting/indenting.\n"
"Brackets Break\n"
"Use 4 spaces\n"
"Indent Bracket=false\n"
"Indent Class=false\n"
"Indent Switch=false\n"
"Indent NameSpace=false"
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 126
#: rc.cpp:755
#, no-c-format
msgid "&Kernighan && Ritchie"
msgstr "&Kernighan && Ritchie"
#. i18n: file ./parts/astyle/astyleconfig.ui line 138
#: rc.cpp:758
#, no-c-format
msgid ""
"Kernighan & Ritchie style formatting/indenting.\n"
"Brackets Attach\n"
"Use 4 spaces\n"
"Indent Class=false\n"
"Indent Switch=false\n"
"Indent Namespaces=false\n"
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 146
#: rc.cpp:767
#, fuzzy, no-c-format
msgid "Linu&x"
msgstr "Linux"
#. i18n: file ./parts/astyle/astyleconfig.ui line 158
#: rc.cpp:770
#, no-c-format
msgid ""
"Linux mode (8 spaces per indent, break definition-block brackets but attach "
"command-block brackets).\n"
"Brackets Linux\n"
"Use 8 spaces\n"
"Indent Bracket=false\n"
"Indent Class=false\n"
"Indent Switch=false\n"
"Indent NameSpace=false"
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 166
#: rc.cpp:779
#, no-c-format
msgid "G&NU"
msgstr "G&NU"
#. i18n: file ./parts/astyle/astyleconfig.ui line 179
#: rc.cpp:782
#, no-c-format
msgid ""
"GNU style formatting/indenting.\n"
"Brackets Break\n"
"Use 2 spaces\n"
"Indent Block=true\n"
"Indent Bracket=false\n"
"Indent Class=false\n"
"Indent Switch=false\n"
"Indent NameSpace=false"
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 187
#: rc.cpp:792
#, no-c-format
msgid "&JAVA"
msgstr "&JAVA"
#. i18n: file ./parts/astyle/astyleconfig.ui line 198
#: rc.cpp:795
#, no-c-format
msgid ""
"Java mode, with standard java style formatting/indenting.\n"
"Java Style\n"
"Use 4 spaces\n"
"Brackets Attach\n"
"Indent Bracket=false\n"
"Indent Switch=false"
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 206
#: rc.cpp:803
#, fuzzy, no-c-format
msgid "Use Global &Options"
msgstr "Bruke &globale typer"
#. i18n: file ./parts/astyle/astyleconfig.ui line 213
#: rc.cpp:806
#, no-c-format
msgid ""
"Use the global defaults. See the menu:\n"
"Settings/Configure TDevelop/Formatting."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 231
#: rc.cpp:810
#, fuzzy, no-c-format
msgid "Files to format"
msgstr "Filer som skal lastes"
#. i18n: file ./parts/astyle/astyleconfig.ui line 259
#: rc.cpp:813
#, no-c-format
msgid ""
"*.c *.h\n"
"*.cpp *.hpp \n"
"*.C *.H \n"
"*.cxx *.hxx \n"
"*.cc *.hh \n"
"*.c++ *.h++\n"
"*.inl *.tlh\n"
"*.moc *.xpm\n"
"*.diff *.patch\n"
"*.java"
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 268
#: rc.cpp:825 rc.cpp:831
#, no-c-format
msgid ""
"Set the extensions of files that the\n"
"formatter will try to reformat. Use a\n"
"space separated list, e.g. *.cpp *.hpp.\n"
"Can use * on its own for any file."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 286
#: rc.cpp:837
#, fuzzy, no-c-format
msgid "Tab && Bra&ckets"
msgstr "Parenteser"
#. i18n: file ./parts/astyle/astyleconfig.ui line 303
#: rc.cpp:840
#, no-c-format
msgid "&Filling"
msgstr "&Fylling"
#. i18n: file ./parts/astyle/astyleconfig.ui line 317
#: rc.cpp:843
#, fuzzy, no-c-format
msgid "Fill empt&y lines"
msgstr "Filmaler"
#. i18n: file ./parts/astyle/astyleconfig.ui line 320
#: rc.cpp:846
#, no-c-format
msgid "Fill empty lines with the white space of their previous lines."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 336
#: rc.cpp:849
#, fuzzy, no-c-format
msgid "U&se tabs"
msgstr "Bruk &tab"
#. i18n: file ./parts/astyle/astyleconfig.ui line 356
#: rc.cpp:852
#, fuzzy, no-c-format
msgid "Number of spaces to use per indent."
msgstr "Antall enum-verdier pr. linje"
#. i18n: file ./parts/astyle/astyleconfig.ui line 367
#: rc.cpp:855
#, no-c-format
msgid "Con&vert tabs"
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 370
#: rc.cpp:858
#, no-c-format
msgid "Convert tabs to spaces."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 398
#: rc.cpp:861
#, fuzzy, no-c-format
msgid "&Use spaces:"
msgstr "Bruk me&llomrom:"
#. i18n: file ./parts/astyle/astyleconfig.ui line 416
#: rc.cpp:864
#, no-c-format
msgid ""
"Number of spaces that will be converted to a tab.\n"
"The number of spaces per tab is controled by the editor."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 427
#: rc.cpp:868
#, fuzzy, no-c-format
msgid "F&orce tabs"
msgstr "Tvunget omredigering"
#. i18n: file ./parts/astyle/astyleconfig.ui line 430
#: rc.cpp:871
#, no-c-format
msgid "Force tabs to be used in areas Astyle would prefer to use spaces."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 465
#: rc.cpp:874
#, no-c-format
msgid "Brackets"
msgstr "Parenteser"
#. i18n: file ./parts/astyle/astyleconfig.ui line 487
#: rc.cpp:877
#, fuzzy, no-c-format
msgid "&No Change"
msgstr "Fil endret"
#. i18n: file ./parts/astyle/astyleconfig.ui line 493
#: rc.cpp:880
#, fuzzy, no-c-format
msgid "The brackets will not be changed."
msgstr "Mappa %1 kan ikke opprettes."
#. i18n: file ./parts/astyle/astyleconfig.ui line 501
#: rc.cpp:883
#, no-c-format
msgid "&Break"
msgstr "&Bryt"
#. i18n: file ./parts/astyle/astyleconfig.ui line 507
#: rc.cpp:886
#, no-c-format
msgid "Break brackets from pre-block code (i.e. ANSI C/C++ style)."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 515
#: rc.cpp:889
#, no-c-format
msgid "&Attach"
msgstr "&Legg ved"
#. i18n: file ./parts/astyle/astyleconfig.ui line 519
#: rc.cpp:892
#, no-c-format
msgid ""
"Attach brackets to pre-block code (i.e. Java/K&R style).\n"
"See also Formatting/Blocks/Break if-else"
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 527
#: rc.cpp:896
#, fuzzy, no-c-format
msgid "Linu&x style"
msgstr "Li&nux-stil"
#. i18n: file ./parts/astyle/astyleconfig.ui line 531
#: rc.cpp:899
#, no-c-format
msgid ""
"Break brackets from class/function declarations, \n"
"but attach brackets to pre-block command statements."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 544
#: rc.cpp:903
#, fuzzy, no-c-format
msgid "Brea&k closing headers"
msgstr "Prekompilerte hoder"
#. i18n: file ./parts/astyle/astyleconfig.ui line 548
#: rc.cpp:906
#, no-c-format
msgid ""
"Break brackets before closing headers (e.g. 'else', 'catch', ...)\n"
"from their immediately preceding closing brackets."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 560
#: rc.cpp:910
#, no-c-format
msgid "&Indentation"
msgstr "&Innrykk"
#. i18n: file ./parts/astyle/astyleconfig.ui line 577
#: rc.cpp:913
#, no-c-format
msgid "Contin&uation"
msgstr "Fo&rtsettelse"
#. i18n: file ./parts/astyle/astyleconfig.ui line 592
#: rc.cpp:916 rc.cpp:923
#, no-c-format
msgid ""
"Indent a maximal # spaces in a continuous statement,\n"
"relative to the previous line."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 600
#: rc.cpp:920
#, no-c-format
msgid "Maximum in statement:"
msgstr "Maksimum i en setning:"
#. i18n: file ./parts/astyle/astyleconfig.ui line 612
#: rc.cpp:927
#, no-c-format
msgid "Minimum in conditional:"
msgstr "Minst i et valg:"
#. i18n: file ./parts/astyle/astyleconfig.ui line 616
#: rc.cpp:930 rc.cpp:937
#, no-c-format
msgid ""
"Indent a minimal # spaces in a continuous conditional\n"
"belonging to a conditional header."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 624
#: rc.cpp:934
#, no-c-format
msgid "Twice current"
msgstr "Dobbelt av nåværende"
#. i18n: file ./parts/astyle/astyleconfig.ui line 650
#: rc.cpp:941
#, no-c-format
msgid "Indented &Entities"
msgstr "Innrykkede &elementer"
#. i18n: file ./parts/astyle/astyleconfig.ui line 661
#: rc.cpp:944
#, fuzzy, no-c-format
msgid "&Switches"
msgstr "Bytt til"
#. i18n: file ./parts/astyle/astyleconfig.ui line 665
#: rc.cpp:947
#, no-c-format
msgid ""
"Indent 'switch' blocks, so that the inner 'case XXX:'\n"
"headers are indented in relation to the switch block."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 673
#: rc.cpp:951
#, fuzzy, no-c-format
msgid "&Case statements"
msgstr "Opprett element"
#. i18n: file ./parts/astyle/astyleconfig.ui line 677
#: rc.cpp:954
#, no-c-format
msgid ""
"Indent case blocks from the 'case XXX:' headers.\n"
"Case statements not enclosed in blocks are NOT indented."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 685
#: rc.cpp:958
#, fuzzy, no-c-format
msgid "Cla&sses"
msgstr "Klasser"
#. i18n: file ./parts/astyle/astyleconfig.ui line 690
#: rc.cpp:961
#, no-c-format
msgid ""
"Indent 'class' blocks, so that the inner 'public:',\n"
"'protected:' and 'private: headers are indented in\n"
"relation to the class block."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 698
#: rc.cpp:966
#, fuzzy, no-c-format
msgid "&Brackets"
msgstr "Parenteser"
#. i18n: file ./parts/astyle/astyleconfig.ui line 701
#: rc.cpp:969
#, no-c-format
msgid "Add extra indentation to '{' and '}' block brackets."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 709
#: rc.cpp:972
#, fuzzy, no-c-format
msgid "&Namespaces"
msgstr "Na&vneområde:"
#. i18n: file ./parts/astyle/astyleconfig.ui line 712
#: rc.cpp:975
#, no-c-format
msgid "Indent the contents of namespace blocks."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 720
#: rc.cpp:978
#, fuzzy, no-c-format
msgid "L&abels"
msgstr "Label4"
#. i18n: file ./parts/astyle/astyleconfig.ui line 728
#: rc.cpp:981
#, no-c-format
msgid ""
"Indent labels so that they appear one indent less than\n"
"the current indentation level, rather than being\n"
"flushed completely to the left (which is the default)."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 736
#: rc.cpp:986
#, fuzzy, no-c-format
msgid "Bloc&ks"
msgstr "blokk"
#. i18n: file ./parts/astyle/astyleconfig.ui line 739
#: rc.cpp:989
#, no-c-format
msgid "Add extra indentation entire blocks (including brackets)."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 750
#: rc.cpp:992
#, fuzzy, no-c-format
msgid "#Prepr&ocessors"
msgstr "Preprosessor"
#. i18n: file ./parts/astyle/astyleconfig.ui line 753
#: rc.cpp:995
#, no-c-format
msgid "Indent multi-line #define statements."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 765
#: rc.cpp:998
#, fuzzy, no-c-format
msgid "For&matting"
msgstr "Formaterer"
#. i18n: file ./parts/astyle/astyleconfig.ui line 782
#: rc.cpp:1001
#, fuzzy, no-c-format
msgid "Blocks"
msgstr "blokk"
#. i18n: file ./parts/astyle/astyleconfig.ui line 793
#: rc.cpp:1004
#, fuzzy, no-c-format
msgid "&Break blocks"
msgstr "&Stoppunkter"
#. i18n: file ./parts/astyle/astyleconfig.ui line 805
#: rc.cpp:1007
#, no-c-format
msgid ""
"Insert empty lines around unrelated blocks, labels, classes,...\n"
"Known problems:\n"
"\n"
"1. If a statement is NOT part of a block, \n"
"the following statements are all double spaced. \n"
"Statements enclosed in a block are formatted \n"
"correctly.\n"
"\n"
"2. Comments are broken from the block.\n"
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 813
#: rc.cpp:1019
#, no-c-format
msgid "Break bl&ocks all"
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 827
#: rc.cpp:1022
#, no-c-format
msgid ""
"Like --break-blocks, except also insert empty lines \n"
"around closing headers (e.g. 'else', 'catch', ...).\n"
"\n"
"Known problems:\n"
"\n"
"1. If a statement is NOT part of a block, \n"
"the following statements are all double spaced. \n"
"Statements enclosed in a block are formatted \n"
"correctly.\n"
"\n"
"2. Comments are broken from the block.\n"
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 835
#: rc.cpp:1036
#, no-c-format
msgid "Break i&f-else"
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 838
#: rc.cpp:1039
#, no-c-format
msgid "Break 'else if()' statements into two different lines."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 854
#: rc.cpp:1042
#, no-c-format
msgid "Padding"
msgstr "Utfylling"
#. i18n: file ./parts/astyle/astyleconfig.ui line 865
#: rc.cpp:1045
#, fuzzy, no-c-format
msgid "Add spa&ces inside parentheses"
msgstr "Legg til mellomrom rundt &parenteser"
#. i18n: file ./parts/astyle/astyleconfig.ui line 868
#: rc.cpp:1048
#, no-c-format
msgid "Insert space padding around parenthesis on the inside only."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 876
#: rc.cpp:1051
#, fuzzy, no-c-format
msgid "A&dd spaces outside parentheses"
msgstr "Legg til mellomrom rundt &parenteser"
#. i18n: file ./parts/astyle/astyleconfig.ui line 879
#: rc.cpp:1054
#, no-c-format
msgid "Insert space padding around parenthesis on the outside only."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 887
#: rc.cpp:1057
#, fuzzy, no-c-format
msgid "Remove &unnecessary spaces around parentheses"
msgstr "Legg til mellomrom rundt &parenteser"
#. i18n: file ./parts/astyle/astyleconfig.ui line 890
#: rc.cpp:1060
#, no-c-format
msgid "Remove unnecessary space padding around parenthesis."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 898
#: rc.cpp:1063
#, fuzzy, no-c-format
msgid "&Add spaces around operators"
msgstr "Legg til mellomrom rundt ope&ratorer"
#. i18n: file ./parts/astyle/astyleconfig.ui line 903
#: rc.cpp:1066
#, no-c-format
msgid ""
"Insert space padding around operators.\n"
"Once padded, operators stay padded.\n"
"There is no unpad operator option."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 919
#: rc.cpp:1071
#, no-c-format
msgid "One Liners"
msgstr "En-linjere"
#. i18n: file ./parts/astyle/astyleconfig.ui line 930
#: rc.cpp:1074
#, fuzzy, no-c-format
msgid "&Keep one-line statements"
msgstr "Behold en-linjes &setninger"
#. i18n: file ./parts/astyle/astyleconfig.ui line 934
#: rc.cpp:1077
#, no-c-format
msgid ""
"Do not break lines containing multiple statements into\n"
"multiple single-statement lines."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 942
#: rc.cpp:1081
#, fuzzy, no-c-format
msgid "Keep o&ne-line blocks"
msgstr "Behold en-linjes b&lokker"
#. i18n: file ./parts/astyle/astyleconfig.ui line 945
#: rc.cpp:1084
#, no-c-format
msgid "Do not break blocks residing completely on one line."
msgstr ""
#. i18n: file ./parts/astyle/astyleconfig.ui line 966
#: rc.cpp:1087
#, no-c-format
msgid "Example"
msgstr "Eksempel"
#. i18n: file ./parts/tools/toolsconfigwidgetbase.ui line 16
#: parts/tools/tools_part.cpp:51 rc.cpp:1090
#, no-c-format
msgid "External Tools"
msgstr "Eksterne verktøy"
#. i18n: file ./parts/tools/toolsconfigwidgetbase.ui line 37
#: rc.cpp:1093
#, no-c-format
msgid "&Tools Menu"
msgstr "Verk&tøymeny"
#. i18n: file ./parts/tools/toolsconfigwidgetbase.ui line 81
#: rc.cpp:1096 rc.cpp:1105 rc.cpp:1114 rc.cpp:1466 rc.cpp:1679 rc.cpp:1880
#: rc.cpp:2874 rc.cpp:2949 rc.cpp:2979 rc.cpp:6035 rc.cpp:6980
#, no-c-format
msgid "&Add..."
msgstr "&Legg til …"
#. i18n: file ./parts/tools/toolsconfigwidgetbase.ui line 141
#: rc.cpp:1102
#, no-c-format
msgid "&File Context Menu"
msgstr "&Filkontekst-meny"
#. i18n: file ./parts/tools/toolsconfigwidgetbase.ui line 245
#: rc.cpp:1111
#, no-c-format
msgid "&Directory Context Menu"
msgstr "&Mappekontekst-meny"
#. i18n: file ./parts/tools/addtooldlg.ui line 16
#: rc.cpp:1120
#, no-c-format
msgid "Add Tool"
msgstr "Legg til-verktøy"
#. i18n: file ./parts/tools/addtooldlg.ui line 27
#: rc.cpp:1123 rc.cpp:1598
#, no-c-format
msgid "&Parameters:"
msgstr "&Parametre:"
#. i18n: file ./parts/tools/addtooldlg.ui line 38
#: rc.cpp:1126
#, no-c-format
msgid "C&apture output"
msgstr "F&ang opp utdata"
#. i18n: file ./parts/tools/addtooldlg.ui line 41
#: rc.cpp:1129
#, no-c-format
msgid ""
"If this is checked, the output of the application will be shown in the "
"application output view; otherwise, all output will be ignored."
msgstr ""
"Hvis dette er krysset av vil utdata fra programmet vises i vinduet for "
"program-utdata, elleres blir alle utdata ignorert."
#. i18n: file ./parts/tools/addtooldlg.ui line 49
#: rc.cpp:1132 rc.cpp:1601
#, no-c-format
msgid "&Executable:"
msgstr "&Programfil:"
#. i18n: file ./parts/tools/addtooldlg.ui line 74
#: rc.cpp:1135
#, no-c-format
msgid "&Menu text:"
msgstr "&Menytekst:"
#. i18n: file ./parts/tools/addtooldlg.ui line 94
#: rc.cpp:1138
#, no-c-format
msgid ""
"<p>The following placeholders can be used:</p>\n"
"<p>\n"
"<b>%D</b> - The project directory"
"<br>\n"
"<b>%S</b> - The current filename"
"<br>\n"
"<b>%T</b> - The current selection"
"<br>\n"
"<b>%W</b> - The current word under the cursor"
"<br>\n"
"</p>\n"
"<p>If any of the used placeholders cannot be evaluated (for example\n"
"if you use %T but there is no current selection), the tool will not be\n"
"executed.</p>"
msgstr ""
"<p>Disse aliasene kan brukes:</p>\n"
"<p>\n"
"<b>%D</b> Prosjektkatalogen"
"<br>\n"
"<b>%S</b> Gjeldende filnavn"
"<br>\n"
"<b>%T</b> Gjeldende utvalg"
"<br>\n"
"<b>%W</b> Ordet under skrivemerket"
"<br>\n"
"</p>\n"
"<p>Hvis noen av de brukte aliasene ikke har noen verdi (for eksempel at det "
"ikke er noe utvalg og %T er brukt), så blir verktøyet ikke kjørt.</p>"
#. i18n: file ./parts/tools/addtooldlg.ui line 102
#: rc.cpp:1150
#, no-c-format
msgid "The text that appears in the Tools-Menu"
msgstr "Teksten som vises i verktøymenyen"
#. i18n: file ./parts/tools/addtooldlg.ui line 159
#: rc.cpp:1159
#, no-c-format
msgid "The path and name of the application to execute"
msgstr "Sti og navn til programmet som skal kjøres"
#. i18n: file ./parts/distpart/distpart_ui.ui line 37
#: rc.cpp:1162
#, no-c-format
msgid "Prepare for Release"
msgstr "Forberede for utgivelse"
#. i18n: file ./parts/distpart/distpart_ui.ui line 79
#: rc.cpp:1165
#, no-c-format
msgid "<H2>Project Packaging & Publishing</H2>"
msgstr "<h2>Prosjektpakking og publisering</h2>"
#. i18n: file ./parts/distpart/distpart_ui.ui line 135
#: rc.cpp:1168
#, fuzzy, no-c-format
msgid "Source &Distribution"
msgstr "&Kildedistribusjon"
#. i18n: file ./parts/distpart/distpart_ui.ui line 151
#: rc.cpp:1171
#, no-c-format
msgid "&Use custom options"
msgstr "Br&uk selvvalgte valg"
#. i18n: file ./parts/distpart/distpart_ui.ui line 154
#: rc.cpp:1174
#, no-c-format
msgid "Default is: %n-%v.tar.gz"
msgstr ""
#. i18n: file ./parts/distpart/distpart_ui.ui line 173
#: rc.cpp:1177
#, no-c-format
msgid "Source Options"
msgstr "Kildevalg"
#. i18n: file ./parts/distpart/distpart_ui.ui line 184
#: rc.cpp:1180
#, no-c-format
msgid "Use &bzip2 instead of gzip"
msgstr "Bruk &bzip2 i stedet for gzip"
#. i18n: file ./parts/distpart/distpart_ui.ui line 203
#: rc.cpp:1183
#, no-c-format
msgid ""
"<b>Archive name format: </b>"
"<br> %n - File name "
"<br> %v - File version "
"<br> %d - Date of archive"
msgstr ""
"<b>Format for arkivnavn:</b> "
"<br> %n filnavn "
"<br> %v filversjon"
"<br> %d arkivets dato"
#. i18n: file ./parts/distpart/distpart_ui.ui line 214
#: rc.cpp:1186
#, no-c-format
msgid "%n-%v"
msgstr "%n-%v"
#. i18n: file ./parts/distpart/distpart_ui.ui line 217
#: rc.cpp:1189
#, fuzzy, no-c-format
msgid "Enter the filename using the format options. "
msgstr "Skriv inn navnet på arkivet"
#. i18n: file ./parts/distpart/distpart_ui.ui line 254
#: rc.cpp:1192
#, fuzzy, no-c-format
msgid "&Add Files"
msgstr "Legg til filer"
#. i18n: file ./parts/distpart/distpart_ui.ui line 270
#: rc.cpp:1195
#, fuzzy, no-c-format
msgid "&Create Source Archive"
msgstr "Opprett kilde&arkiv"
#. i18n: file ./parts/distpart/distpart_ui.ui line 286
#: rc.cpp:1198 rc.cpp:1321
#, no-c-format
msgid "R&eset"
msgstr "Tilbak&estill"
#. i18n: file ./parts/distpart/distpart_ui.ui line 296
#: parts/quickopen/quickopenfiledialog.cpp:42
#: parts/quickopen/quickopenfiledialog.cpp:57 rc.cpp:1201
#, no-c-format
msgid "File &list:"
msgstr "Fil&liste:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 309
#: rc.cpp:1204
#, fuzzy, no-c-format
msgid "Package &Information"
msgstr "&Pakkeinformasjon:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 349
#: rc.cpp:1207
#, no-c-format
msgid "Ve&ndor:"
msgstr "Levera&ndør:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 381
#: rc.cpp:1210
#, fuzzy, no-c-format
msgid "Application name"
msgstr "&Programnavn:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 402
#: rc.cpp:1213
#, no-c-format
msgid "&Application name:"
msgstr "&Programnavn:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 413
#: rc.cpp:1216
#, no-c-format
msgid "S&ummary:"
msgstr "Sa&mmendrag:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 424
#: rc.cpp:1219 rc.cpp:7884
#, no-c-format
msgid "&License:"
msgstr "&Lisensbestemmelser:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 435
#: rc.cpp:1222
#, no-c-format
msgid "R&elease:"
msgstr "Utgav&e:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 446
#: rc.cpp:1225
#, no-c-format
msgid "&Version:"
msgstr "&Versjon:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 493
#: rc.cpp:1228
#, no-c-format
msgid ""
"Version of the file package.\n"
"Menu item: Project/Project Options/General/Version\n"
"changes project compiled version number"
msgstr ""
#. i18n: file ./parts/distpart/distpart_ui.ui line 501
#: rc.cpp:1233
#, no-c-format
msgid "&Group:"
msgstr "&Gruppe:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 512
#: rc.cpp:1236
#, no-c-format
msgid "Pac&kager:"
msgstr "Pa&kker:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 538
#: rc.cpp:1239
#, no-c-format
msgid "Advanced Package Op&tions"
msgstr "Avanser&te pakkevalg"
#. i18n: file ./parts/distpart/distpart_ui.ui line 549
#: rc.cpp:1242
#, fuzzy, no-c-format
msgid "&Create development package"
msgstr "Lag utviklingspakke"
#. i18n: file ./parts/distpart/distpart_ui.ui line 557
#: rc.cpp:1245
#, no-c-format
msgid "Create documentation package"
msgstr "Lag dokumentasjonspakke"
#. i18n: file ./parts/distpart/distpart_ui.ui line 565
#: rc.cpp:1248
#, no-c-format
msgid "Include application icon"
msgstr "Ta med programikon"
#. i18n: file ./parts/distpart/distpart_ui.ui line 573
#: rc.cpp:1251
#, no-c-format
msgid ""
"Architecture target:<BR><b>(Note: You must have a compiler that supports this "
"target)</b>"
msgstr ""
"Arkitekturmål: <BR><b>(Merk: du må ha en kompilator som har støtte for dette "
"målet)</b>"
#. i18n: file ./parts/distpart/distpart_ui.ui line 579
#: rc.cpp:1254
#, no-c-format
msgid "i386"
msgstr "i386"
#. i18n: file ./parts/distpart/distpart_ui.ui line 584
#: rc.cpp:1257
#, no-c-format
msgid "i586"
msgstr "i586"
#. i18n: file ./parts/distpart/distpart_ui.ui line 589
#: rc.cpp:1260
#, no-c-format
msgid "i686"
msgstr "i686"
#. i18n: file ./parts/distpart/distpart_ui.ui line 594
#: rc.cpp:1263
#, no-c-format
msgid "AMD K6"
msgstr "AMD K6"
#. i18n: file ./parts/distpart/distpart_ui.ui line 599
#: rc.cpp:1266
#, no-c-format
msgid "AMD K7"
msgstr "AMD K7"
#. i18n: file ./parts/distpart/distpart_ui.ui line 604
#: rc.cpp:1269
#, no-c-format
msgid "PPC"
msgstr "PPC"
#. i18n: file ./parts/distpart/distpart_ui.ui line 609
#: rc.cpp:1272
#, no-c-format
msgid "PPC G3"
msgstr "PPC G3"
#. i18n: file ./parts/distpart/distpart_ui.ui line 614
#: rc.cpp:1275
#, no-c-format
msgid "PPC Altevec"
msgstr "PPC Altevec"
#. i18n: file ./parts/distpart/distpart_ui.ui line 619
#: rc.cpp:1278
#, no-c-format
msgid "Dec Alpha (AXP)"
msgstr "Dec Alpha (AXP)"
#. i18n: file ./parts/distpart/distpart_ui.ui line 624
#: rc.cpp:1281
#, no-c-format
msgid "Sparc"
msgstr "Sparc"
#. i18n: file ./parts/distpart/distpart_ui.ui line 669
#: rc.cpp:1284
#, fuzzy, no-c-format
msgid ""
"&Build Source \n"
"Package"
msgstr ""
"Bygg kilde\n"
"Pakke"
#. i18n: file ./parts/distpart/distpart_ui.ui line 678
#: rc.cpp:1288
#, fuzzy, no-c-format
msgid ""
"Build Binar&y \n"
"Package"
msgstr ""
"Bygg binær\n"
"pakke"
#. i18n: file ./parts/distpart/distpart_ui.ui line 687
#: rc.cpp:1292
#, fuzzy, no-c-format
msgid ""
"E&xport \n"
"Build Files"
msgstr ""
"Eksporter\n"
"byggefiler"
#. i18n: file ./parts/distpart/distpart_ui.ui line 696
#: rc.cpp:1296
#, fuzzy, no-c-format
msgid ""
"I&mport \n"
"Build Files"
msgstr ""
"Importer\n"
"byggefiler"
#. i18n: file ./parts/distpart/distpart_ui.ui line 732
#: rc.cpp:1300 rc.cpp:1652 rc.cpp:6369
#, no-c-format
msgid "&Description:"
msgstr "&Beskrivelse:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 777
#: rc.cpp:1303
#, no-c-format
msgid "C&hangelog:"
msgstr "En&dringslogg:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 807
#: rc.cpp:1306
#, fuzzy, no-c-format
msgid "Pr&oject Publishing"
msgstr "Prosjektpublisering"
#. i18n: file ./parts/distpart/distpart_ui.ui line 826
#: rc.cpp:1309
#, no-c-format
msgid "Local Options"
msgstr "Lokale valg"
#. i18n: file ./parts/distpart/distpart_ui.ui line 848
#: rc.cpp:1312
#, fuzzy, no-c-format
msgid "Ge&nerate HTML information page"
msgstr "Lag imformasjonsside i &HTML"
#. i18n: file ./parts/distpart/distpart_ui.ui line 856
#: rc.cpp:1315
#, no-c-format
msgid "&User information generated by RPM"
msgstr "Br&ukerinformasjon laget med RPM"
#. i18n: file ./parts/distpart/distpart_ui.ui line 911
#: rc.cpp:1318
#, no-c-format
msgid "&Generate"
msgstr "&Lag"
#. i18n: file ./parts/distpart/distpart_ui.ui line 939
#: rc.cpp:1324
#, no-c-format
msgid "Re&mote Options"
msgstr "F&jernvalg"
#. i18n: file ./parts/distpart/distpart_ui.ui line 980
#: rc.cpp:1327
#, no-c-format
msgid "File su&bmission list:"
msgstr "Filer som skal pu&bliseres:"
#. i18n: file ./parts/distpart/distpart_ui.ui line 1016
#: rc.cpp:1330
#, no-c-format
msgid "+"
msgstr "+"
#. i18n: file ./parts/distpart/distpart_ui.ui line 1032
#: rc.cpp:1333
#, no-c-format
msgid "-"
msgstr "-"
#. i18n: file ./parts/distpart/distpart_ui.ui line 1053
#: rc.cpp:1336
#, fuzzy, no-c-format
msgid "Upload to &custom FTP site"
msgstr "Last opp til selvvalgt FTP-sted"
#. i18n: file ./parts/distpart/distpart_ui.ui line 1061
#: rc.cpp:1339
#, fuzzy, no-c-format
msgid "Upload files to ftp.&kde.org"
msgstr "Last opp filer til ftp.kde.org"
#. i18n: file ./parts/distpart/distpart_ui.ui line 1086
#: rc.cpp:1342
#, fuzzy, no-c-format
msgid "Sub&mit"
msgstr "Send inn"
#. i18n: file ./parts/distpart/distpart_ui.ui line 1094
#: rc.cpp:1345
#, no-c-format
msgid "ftp://username:password@ftp.server.com/path/"
msgstr "ftp://brukernavn:passord@ftp.tjener.com/sti/"
#. i18n: file ./parts/distpart/distpart_ui.ui line 1102
#: rc.cpp:1348
#, no-c-format
msgid "Reset"
msgstr "Nullstill"
#. i18n: file ./parts/distpart/distpart_ui.ui line 1110
#: rc.cpp:1351
#, fuzzy, no-c-format
msgid "Upload to &apps.kde.com"
msgstr "Last opp til apps.kde.com"
#. i18n: file ./parts/documentation/docprojectconfigwidgetbase.ui line 41
#: parts/documentation/interfaces/kdevdocumentationplugin.cpp:720 rc.cpp:1354
#, no-c-format
msgid "Project API Documentation"
msgstr "Dokumentasjon for prosjektets API"
#. i18n: file ./parts/documentation/docprojectconfigwidgetbase.ui line 60
#: rc.cpp:1357
#, no-c-format
msgid "Ca&talog location:"
msgstr "Mappes&ted:"
#. i18n: file ./parts/documentation/docprojectconfigwidgetbase.ui line 85
#: rc.cpp:1360
#, no-c-format
msgid "C&ollection type:"
msgstr "S&amlingstype:"
#. i18n: file ./parts/documentation/docprojectconfigwidgetbase.ui line 103
#: parts/documentation/interfaces/kdevdocumentationplugin.cpp:721 rc.cpp:1363
#, no-c-format
msgid "Project User Manual"
msgstr "Prosjektets brukerhåndbok"
#. i18n: file ./parts/documentation/find_documentation_optionsbase.ui line 16
#: rc.cpp:1369
#, no-c-format
msgid "Find Documentation Options"
msgstr "Finn dokumentasjonsvalg"
#. i18n: file ./parts/documentation/find_documentation_optionsbase.ui line 109
#: rc.cpp:1378
#, no-c-format
msgid "Go to first match"
msgstr "Gå til første treff"
#. i18n: file ./parts/documentation/find_documentation_optionsbase.ui line 182
#: rc.cpp:1387
#, no-c-format
msgid ""
"You can enable and disable search\n"
"sources and change their priority here."
msgstr ""
"Her kan du slå søkekilder av og på\n"
"og endre prioritetene deres."
#. i18n: file ./parts/documentation/editcatalogdlgbase.ui line 19
#: rc.cpp:1391 rc.cpp:1406
#, no-c-format
msgid "Documentation Catalog Properties"
msgstr "Egenskaper for dokumentasjonsmappa"
#. i18n: file ./parts/documentation/editcatalogdlgbase.ui line 141
#: parts/fileview/addfilegroupdlg.cpp:26 rc.cpp:1403 rc.cpp:1415
#, no-c-format
msgid "&Title:"
msgstr "&Tittel:"
#. i18n: file ./parts/documentation/addcatalogdlgbase.ui line 43
#: rc.cpp:1409
#, no-c-format
msgid "Type:"
msgstr "Type:"
#. i18n: file ./parts/documentation/addcatalogdlgbase.ui line 73
#: rc.cpp:1412
#, no-c-format
msgid "Locatio&n:"
msgstr "&Sted:"
#. i18n: file ./parts/documentation/selecttopicbase.ui line 16
#: rc.cpp:1424
#, no-c-format
msgid "Choose Topic"
msgstr "Velg emne"
#. i18n: file ./parts/documentation/selecttopicbase.ui line 94
#: rc.cpp:1433
#, no-c-format
msgid "Choose a topic for <b>%1</b>:"
msgstr "Velg et emne for <b>%1</b>:"
#. i18n: file ./parts/documentation/find_documentationbase.ui line 25
#: parts/documentation/documentation_part.cpp:248 rc.cpp:1436
#, no-c-format
msgid "Find Documentation"
msgstr "Finn dokumentasjon"
#. i18n: file ./parts/documentation/find_documentationbase.ui line 36
#: rc.cpp:1439
#, no-c-format
msgid "Search term:"
msgstr "Søkebegrep:"
#. i18n: file ./parts/documentation/find_documentationbase.ui line 44
#: parts/documentation/docconfiglistview.cpp:31
#: parts/documentation/documentation_widget.cpp:62
#: parts/documentation/docutils.cpp:90 parts/doxygen/messages.cpp:276
#: rc.cpp:1442
#, no-c-format
msgid "Search"
msgstr "Søk"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 16
#: parts/documentation/bookmarkview.cpp:49
#: parts/documentation/documentation_part.cpp:88
#: parts/documentation/documentation_part.cpp:98
#: parts/documentation/documentation_part.cpp:106
#: parts/documentation/docutils.cpp:79 rc.cpp:1460
#, no-c-format
msgid "Documentation"
msgstr "Dokumentasjon"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 34
#: rc.cpp:1463
#, no-c-format
msgid "&Documentation Collections"
msgstr "&Dokumentasjonssamlinger"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 82
#: rc.cpp:1469 rc.cpp:2000 rc.cpp:2877 rc.cpp:2952 rc.cpp:2982
#, no-c-format
msgid "&Edit..."
msgstr "&Rediger …"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 98
#: rc.cpp:1475
#, fuzzy, no-c-format
msgid "&Rescan"
msgstr "&Start på nytt"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 127
#: rc.cpp:1478
#, no-c-format
msgid "Full Text &Search"
msgstr "Fulltekst-&søk"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 163
#: rc.cpp:1481
#, no-c-format
msgid "htse&arch executable:"
msgstr "htse&arch programfil:"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 215
#: rc.cpp:1484
#, no-c-format
msgid "htdi&g executable:"
msgstr "htdi&g programfil:"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 234
#: rc.cpp:1487
#, no-c-format
msgid "Database di&rectory:"
msgstr "Databasema&ppe:"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 245
#: rc.cpp:1490
#, no-c-format
msgid "ht&merge executable:"
msgstr "ht&merge programfil:"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 260
#: rc.cpp:1493
#, no-c-format
msgid "O&ther"
msgstr "An&dre"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 288
#: rc.cpp:1496
#, no-c-format
msgid "Editor Context Menu Items"
msgstr "Elementer i redigeringens kontekst-meny"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 299
#: rc.cpp:1499
#, no-c-format
msgid "&Find in documentation"
msgstr "&Finn i dokumentasjonen"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 307
#: rc.cpp:1502
#, no-c-format
msgid "&Look in documentation index"
msgstr "&Se i dokumentasjonsindeksen"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 315
#: rc.cpp:1505
#, no-c-format
msgid "S&earch in documentation"
msgstr "Sø&k i dokumentasjon"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 323
#: rc.cpp:1508
#, no-c-format
msgid "Goto &infopage"
msgstr "Gå til &infoside"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 331
#: rc.cpp:1511
#, no-c-format
msgid "Goto &manpage"
msgstr "Gå til &manside"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 341
#: rc.cpp:1514
#, fuzzy, no-c-format
msgid "Use TDevelop &Assistant to browse documentation"
msgstr "Bruk KDevelop &Assistant til å bla i dokumentasjonen"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 349
#: rc.cpp:1517
#, no-c-format
msgid "Fonts && Sizes"
msgstr "Skrifttyper og størrelser"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 368
#: rc.cpp:1520
#, no-c-format
msgid "Sta&ndard font:"
msgstr "Sta&ndard skrift:"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 397
#: rc.cpp:1523
#, no-c-format
msgid "Fi&xed font:"
msgstr "Fa&stbredde-skrifttype:"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 416
#: rc.cpp:1526
#, no-c-format
msgid "&Zoom factor:"
msgstr "&Zoom-faktor:"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 425
#: rc.cpp:1529
#, no-c-format
msgid "20"
msgstr "20"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 430
#: rc.cpp:1532
#, no-c-format
msgid "40"
msgstr "40"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 435
#: rc.cpp:1535
#, no-c-format
msgid "60"
msgstr "60"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 440
#: rc.cpp:1538
#, no-c-format
msgid "80"
msgstr "80"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 445
#: rc.cpp:1541
#, no-c-format
msgid "90"
msgstr "90"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 450
#: rc.cpp:1544
#, no-c-format
msgid "95"
msgstr "95"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 455
#: rc.cpp:1547
#, no-c-format
msgid "100"
msgstr "100"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 460
#: rc.cpp:1550
#, no-c-format
msgid "105"
msgstr "105"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 465
#: rc.cpp:1553
#, no-c-format
msgid "110"
msgstr "110"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 470
#: rc.cpp:1556
#, no-c-format
msgid "120"
msgstr "120"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 475
#: rc.cpp:1559
#, no-c-format
msgid "140"
msgstr "140"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 480
#: rc.cpp:1562
#, no-c-format
msgid "160"
msgstr "160"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 485
#: rc.cpp:1565
#, no-c-format
msgid "180"
msgstr "180"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 490
#: rc.cpp:1568
#, no-c-format
msgid "200"
msgstr "200"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 495
#: rc.cpp:1571
#, no-c-format
msgid "250"
msgstr "250"
#. i18n: file ./parts/documentation/docglobalconfigwidgetbase.ui line 500
#: rc.cpp:1574
#, no-c-format
msgid "300"
msgstr "300"
#. i18n: file ./parts/partexplorer/partexplorerformbase.ui line 24
#: rc.cpp:1577
#, no-c-format
msgid "PartExplorer"
msgstr "PartExplorer"
#. i18n: file ./parts/partexplorer/partexplorerformbase.ui line 27
#: rc.cpp:1580
#, no-c-format
msgid ""
"This is a front-end to TDE's TDETrader: search your TDE documentation for more "
"information about TDE services and TDETrader"
msgstr ""
"Dette er en grenseflate til TDEs TDETrader: søk i TDE-dokumentasjonen for å "
"finne mer informasjon om TDE-tjenester og TDETrader"
#. i18n: file ./parts/partexplorer/partexplorerformbase.ui line 46
#: rc.cpp:1583
#, no-c-format
msgid "TDE service &type:"
msgstr "TDE-tjeneste&type:"
#. i18n: file ./parts/partexplorer/partexplorerformbase.ui line 79
#: rc.cpp:1586
#, no-c-format
msgid "&Additional constraints:"
msgstr "&Flere skranker:"
#. i18n: file ./parts/partexplorer/partexplorerformbase.ui line 104
#: rc.cpp:1589
#, fuzzy, no-c-format
msgid ""
"<b>Constraints</b>Refine your query by writing additional constraints such as "
"<i>([X-TDevelop-Scope]='Global')</i>)."
msgstr ""
"<b>Skranker</b> Forbedre spørringen ved å skrive flere føringer slik som <i>"
"([X-KDevelop-Scope]='Global')</i>."
#. i18n: file ./parts/partexplorer/partexplorerformbase.ui line 120
#: rc.cpp:1592
#, no-c-format
msgid "&Results"
msgstr "&Resultater"
#. i18n: file ./parts/valgrind/dialog_widget.ui line 24
#: buildtools/autotools/addicondlg.cpp:45
#: parts/outputviews/appoutputviewpart.cpp:51 rc.cpp:1595 rc.cpp:2487
#, no-c-format
msgid "Application"
msgstr "Program"
#. i18n: file ./parts/valgrind/dialog_widget.ui line 87
#: rc.cpp:1604 rc.cpp:1622
#, no-c-format
msgid "Valgrind"
msgstr "Valgrind"
#. i18n: file ./parts/valgrind/dialog_widget.ui line 98
#: rc.cpp:1607
#, no-c-format
msgid "Memory &leak check"
msgstr "Sjekk for minne&lekkasje"
#. i18n: file ./parts/valgrind/dialog_widget.ui line 137
#: rc.cpp:1610
#, no-c-format
msgid "&Show still reachable blocks"
msgstr "Vi&s blokker som ennå kan nås"
#. i18n: file ./parts/valgrind/dialog_widget.ui line 147
#: rc.cpp:1613 rc.cpp:1631
#, no-c-format
msgid "&Trace children"
msgstr "Sp&or barn"
#. i18n: file ./parts/valgrind/dialog_widget.ui line 166
#: rc.cpp:1616 rc.cpp:1625
#, no-c-format
msgid "Additional p&arameters:"
msgstr "Flere &parametre:"
#. i18n: file ./parts/valgrind/dialog_widget.ui line 187
#: rc.cpp:1619 rc.cpp:1628 rc.cpp:2526
#, no-c-format
msgid "E&xecutable:"
msgstr "Pro&gramfil:"
#. i18n: file ./parts/valgrind/dialog_widget.ui line 284
#: rc.cpp:1634
#, no-c-format
msgid "KCachegrind"
msgstr "KCachegrind"
#. i18n: file ./parts/valgrind/dialog_widget.ui line 300
#: rc.cpp:1637
#, fuzzy, no-c-format
msgid "Exe&cutable:"
msgstr "Programfil:"
#. i18n: file ./parts/abbrev/addtemplatedlgbase.ui line 16
#: rc.cpp:1640
#, no-c-format
msgid "Add Code Template"
msgstr "Legg til kodemal"
#. i18n: file ./parts/abbrev/addtemplatedlgbase.ui line 85
#: parts/grepview/grepdlg.cpp:105 rc.cpp:1649
#, no-c-format
msgid "&Template:"
msgstr "&Mal:"
#. i18n: file ./parts/abbrev/addtemplatedlgbase.ui line 139
#: rc.cpp:1655
#, no-c-format
msgid "&Suffixes:"
msgstr "&Suffikser:"
#. i18n: file ./parts/abbrev/abbrevconfigwidgetbase.ui line 16
#: rc.cpp:1658
#, no-c-format
msgid "Code Templates"
msgstr "Kodemaler"
#. i18n: file ./parts/abbrev/abbrevconfigwidgetbase.ui line 27
#: rc.cpp:1661
#, no-c-format
msgid "Co&de:"
msgstr "Ko&de:"
#. i18n: file ./parts/abbrev/abbrevconfigwidgetbase.ui line 43
#: rc.cpp:1664
#, no-c-format
msgid "&Enable automatic word completion"
msgstr "&Slå på automatisk ordfullføring"
#. i18n: file ./parts/abbrev/abbrevconfigwidgetbase.ui line 65
#: rc.cpp:1670 rc.cpp:3316
#, no-c-format
msgid "Template"
msgstr "Mal"
#. i18n: file ./parts/abbrev/abbrevconfigwidgetbase.ui line 76
#: parts/filecreate/addglobaldlg.cpp:63 src/languageselectwidget.cpp:83
#: rc.cpp:1673 rc.cpp:1727 rc.cpp:1751 rc.cpp:6291
#, no-c-format
msgid "Description"
msgstr "Beskrivelse"
#. i18n: file ./parts/abbrev/abbrevconfigwidgetbase.ui line 87
#: rc.cpp:1676
#, no-c-format
msgid "Suffixes"
msgstr "Filendelser"
#. i18n: file ./parts/abbrev/abbrevconfigwidgetbase.ui line 119
#: rc.cpp:1682
#, no-c-format
msgid "&Templates:"
msgstr "&Maler:"
#. i18n: file ./parts/filecreate/fctemplateeditbase.ui line 16
#: rc.cpp:1685
#, no-c-format
msgid "File Template"
msgstr "Filmal"
#. i18n: file ./parts/filecreate/fctemplateeditbase.ui line 41
#: rc.cpp:1688 rc.cpp:4169
#, no-c-format
msgid "Template &name:"
msgstr "Mal&navn:"
#. i18n: file ./parts/filecreate/fctemplateeditbase.ui line 78
#: rc.cpp:1691 rc.cpp:1787
#, no-c-format
msgid "Set template content from &file:"
msgstr "Ta innhold i malen fra &fil:"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 16
#: rc.cpp:1700
#, no-c-format
msgid "New File Wizard Options"
msgstr "Valg for veiviser for nye filer"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 34
#: rc.cpp:1703
#, fuzzy, no-c-format
msgid "Pro&ject Types"
msgstr "&Prosjekttyper"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 45
#: rc.cpp:1706
#, no-c-format
msgid "Re&move Type"
msgstr "Fjer&n type"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 53
#: rc.cpp:1709
#, fuzzy, no-c-format
msgid "Edit T&ype..."
msgstr "R&ediger type …"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 61
#: rc.cpp:1712
#, no-c-format
msgid "New &Subtype..."
msgstr "Ny &undertype …"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 69
#: rc.cpp:1715
#, no-c-format
msgid "&New Type..."
msgstr "&Ny type …"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 75
#: parts/filecreate/addglobaldlg.cpp:59 rc.cpp:1718 rc.cpp:1742
#, no-c-format
msgid "Type Extension"
msgstr "Type-etternavn"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 86
#: parts/filecreate/addglobaldlg.cpp:60 rc.cpp:1721 rc.cpp:1745
#, no-c-format
msgid "Type Name"
msgstr "Typenavn:"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 97
#: parts/filecreate/addglobaldlg.cpp:62 rc.cpp:1724 rc.cpp:1748
#, no-c-format
msgid "Icon"
msgstr "Ikon"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 205
#: rc.cpp:1736
#, fuzzy, no-c-format
msgid "Ed&it Template"
msgstr "Rediger ma&l"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 215
#: rc.cpp:1739
#, no-c-format
msgid "Used &Global Types"
msgstr "Bruke &globale typer"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 301
#: rc.cpp:1754
#, no-c-format
msgid "Copy to Pro&ject Types"
msgstr "Kopier til pros&jekt-typer"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 311
#: rc.cpp:1757
#, fuzzy, no-c-format
msgid "Proje&ct Templates"
msgstr "Prosjek&tmaler"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 320
#: rc.cpp:1760
#, no-c-format
msgid "Template Name"
msgstr "Malnavn"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 347
#: rc.cpp:1763
#, no-c-format
msgid "C&hange Content..."
msgstr "Endre inn&hold …"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 355
#: rc.cpp:1766
#, no-c-format
msgid "&New Template..."
msgstr "&Ny mal …"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 371
#: rc.cpp:1769
#, no-c-format
msgid "Re&move Template"
msgstr "Fjern &mal"
#. i18n: file ./parts/filecreate/fcconfigwidgetbase.ui line 396
#: rc.cpp:1772
#, no-c-format
msgid "&Edit Template"
msgstr "R&ediger mal"
#. i18n: file ./parts/filecreate/fctypeeditbase.ui line 16
#: rc.cpp:1775
#, no-c-format
msgid "File Type"
msgstr "Filtype"
#. i18n: file ./parts/filecreate/fctypeeditbase.ui line 44
#: rc.cpp:1778
#, no-c-format
msgid "Type &extension:"
msgstr "Type-&etternavn:"
#. i18n: file ./parts/filecreate/fctypeeditbase.ui line 76
#: rc.cpp:1781
#, no-c-format
msgid "Type &name:"
msgstr "Type&navn:"
#. i18n: file ./parts/filecreate/fctypeeditbase.ui line 108
#: rc.cpp:1784
#, no-c-format
msgid "Type &description:"
msgstr "Ty&pebeskrivelse:"
#. i18n: file ./parts/ctags2/ctags2_selecttagfilebase.ui line 16
#: rc.cpp:1796
#, fuzzy, no-c-format
msgid "Add tags file"
msgstr "Legg til eksisterende filer"
#. i18n: file ./parts/ctags2/ctags2_selecttagfilebase.ui line 27
#: rc.cpp:1799 rc.cpp:1895 rc.cpp:3724 rc.cpp:7688
#, no-c-format
msgid "Name:"
msgstr "Navn:"
#. i18n: file ./parts/ctags2/ctags2_selecttagfilebase.ui line 40
#: rc.cpp:1802
#, fuzzy, no-c-format
msgid "Tags file:"
msgstr "Tag-filer"
#. i18n: file ./parts/ctags2/ctags2_selecttagfilebase.ui line 78
#: rc.cpp:1805 rc.cpp:3295 rc.cpp:3814 rc.cpp:6194 rc.cpp:8230
#, no-c-format
msgid "O&K"
msgstr ""
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 28
#: rc.cpp:1811 rc.cpp:4660
#, no-c-format
msgid "Ge&neral"
msgstr "Ge&nerelt"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 47
#: rc.cpp:1814
#, no-c-format
msgid "Editor Context Menu"
msgstr "Redigeringens kontekst-meny"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 58
#: rc.cpp:1817
#, fuzzy, no-c-format
msgid "Show \"&Go To Declaration\""
msgstr "Vis «Gå til deklarasjon»"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 61
#: rc.cpp:1820
#, no-c-format
msgid ""
"If checked, an option to go directly to the matching tag declaration will be "
"shown. If more than one match, all matches will be shown in the main ctags "
"result view."
msgstr ""
"Hvis dette er krysset av, blir det vist en mulighet til å gå direkte til den "
"samsvarende tag-deklarasjonen. Finnes det mer enn ett samsvar, så vises alle i "
"resultatvisningen for ctags."
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 69
#: rc.cpp:1823
#, fuzzy, no-c-format
msgid "Show \"Go To &Definition\""
msgstr "Vis «Gå til definisjon»"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 72
#: rc.cpp:1826
#, no-c-format
msgid ""
"If checked, an option to go directly to the matching tag definition will be "
"shown. If more than one match, all matches will be shown in the main ctags "
"result view."
msgstr ""
"Hvis dette er krysset av, blir det vist en mulighet til å gå direkte til den "
"samsvarende tag-definisjonen. Finnes det mer enn ett samsvar, så vises alle i "
"resultatvisningen for ctags."
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 80
#: rc.cpp:1829
#, fuzzy, no-c-format
msgid "Show \"CT&ags Lookup\""
msgstr "Vis «CTags oppslag»"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 83
#: rc.cpp:1832
#, no-c-format
msgid ""
"If checked, an option to do a full lookup of all macthing tags is shown in the "
"context menu. The results will be shown in the main ctags results view."
msgstr ""
"Hvis dette er krysset av, blir det vist en mulighet til slå opp alle "
"samsvarende tag-er. Resultatet vises i resultatvisningen for ctags."
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 112
#: rc.cpp:1838
#, fuzzy, no-c-format
msgid "When more than one hit, go directl&y to the first"
msgstr "Hvis mer enn ett treff, gå direkte til det første"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 115
#: rc.cpp:1841
#, no-c-format
msgid ""
"If more than one hit was produced from an attempt to find an exact match, go to "
"the first match in the list. Note: the <i>Go To Next Match</i> "
"shortcut can be used to step between the matches."
msgstr ""
"Hvis det ble funnet mer enn ett treff ved forsøk på å finne nøyaktig samsvar, "
"så gå til første treff i lista. Merk: snarveien <i>Gå til neste treff</i> "
"kan brukes til å gå fra treff til treff."
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 123
#: rc.cpp:1844
#, fuzzy, no-c-format
msgid "&Use custom tagfile generation arguments"
msgstr "Bruk tilpassede argumenter til opprettelse av tag-fil"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 126
#: rc.cpp:1847
#, no-c-format
msgid ""
"The default arguments should be fine, but if needed a custom generation "
"arguments string can be used."
msgstr ""
"Standardargumentene burde være bra, men om det trengs kan en tilpasset "
"argumentstreng brukes."
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 140
#: rc.cpp:1850
#, no-c-format
msgid ""
"Enter custom arguments to ctags database creation here. Note: do not set a "
"custom tags file filename here, do that below instead."
msgstr ""
"Oppgi tilpassede argumenter for opprettelse av ctags-database her. Merk: ikke "
"oppgi et tilpasset filnavn for tag-fil her, gjør det i stedet nedenfor."
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 158
#: rc.cpp:1853
#, no-c-format
msgid "Paths"
msgstr "Stier"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 161
#: rc.cpp:1856 rc.cpp:1862
#, no-c-format
msgid ""
"Enter the path to the exuberant ctags binary. If empty, <i>ctags</i> "
"will be executed via $PATH. Note that it is sometimes installed as <i>"
"exuberant-ctags</i>."
msgstr ""
"Oppgi stien til programmet «exuberant ctags». Hvis det er tomt blir <i>ctags</i>"
"kjørt via $PATH. Merk at det kan være installert som <i>exuberant-ctags</i>"
". («Rikelige ctags».)"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 172
#: rc.cpp:1859
#, no-c-format
msgid "Path to ctags binary:"
msgstr "Sti til ctags-programmet:"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 209
#: rc.cpp:1865
#, fuzzy, no-c-format
msgid "Mana&ge tag files"
msgstr "Lag tag-fil"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 228
#: rc.cpp:1868
#, fuzzy, no-c-format
msgid "Path to project tag file:"
msgstr "Sti til prosjektets tag-fil:"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 236
#: rc.cpp:1871
#, no-c-format
msgid ""
"Enter the full path of the project tagfile. If empty, the file will be called "
"<i>tags</i> and reside in the root of the project."
msgstr ""
"Opgi fullstendig stinavn til prosjektets tag-fil. Hvis det er tomt, kalles fila "
"<i>tags</i> og bor i prosjektets rot."
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 246
#: rc.cpp:1874
#, fuzzy, no-c-format
msgid "Other tag files:"
msgstr "Ob&jektfiler:"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 262
#: rc.cpp:1877
#, fuzzy, no-c-format
msgid "&Create..."
msgstr "Oppretter …"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 278
#: rc.cpp:1883
#, fuzzy, no-c-format
msgid "Remo&ve"
msgstr "Fjer&n"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 303
#: buildtools/qmake/projectconfigurationdlg.cpp:1794
#: kdevdesigner/designer/hierarchyview.cpp:190
#: lib/widgets/propeditor/propertyeditor.cpp:172
#: parts/fileview/filegroupswidget.cpp:169 rc.cpp:1886 rc.cpp:2226 rc.cpp:2373
#: rc.cpp:2403 rc.cpp:2970 rc.cpp:3703 rc.cpp:6288 rc.cpp:6336 rc.cpp:6351
#, no-c-format
msgid "Name"
msgstr "Navn"
#. i18n: file ./parts/ctags2/ctags2_settingswidgetbase.ui line 314
#: rc.cpp:1889
#, fuzzy, no-c-format
msgid "Tags file"
msgstr "Tag-filer"
#. i18n: file ./parts/ctags2/ctags2_createtagfilebase.ui line 16
#: rc.cpp:1892
#, fuzzy, no-c-format
msgid "Create new tags file"
msgstr "Opprett ny fil"
#. i18n: file ./parts/ctags2/ctags2_createtagfilebase.ui line 40
#: rc.cpp:1898
#, no-c-format
msgid "Target tags file path:"
msgstr ""
#. i18n: file ./parts/ctags2/ctags2_createtagfilebase.ui line 53
#: rc.cpp:1901
#, fuzzy, no-c-format
msgid "Directory to tag:"
msgstr "Mappe:"
#. i18n: file ./parts/ctags2/ctags2_createtagfilebase.ui line 91
#: rc.cpp:1904
#, fuzzy, no-c-format
msgid "&Create"
msgstr "&Opprett"
#. i18n: file ./parts/ctags2/ctags2_createtagfilebase.ui line 99
#: rc.cpp:1907 rc.cpp:8233 rc.cpp:8441
#, fuzzy, no-c-format
msgid "C&ancel"
msgstr "En&dringslogg:"
#. i18n: file ./parts/ctags2/ctags2_widgetbase.ui line 28
#: rc.cpp:1910
#, no-c-format
msgid "Tag"
msgstr "Tagg"
#. i18n: file ./parts/ctags2/ctags2_widgetbase.ui line 39
#: kdevdesigner/designer/outputwindow.cpp:83
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:218
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:230
#: parts/partexplorer/partexplorerform.cpp:117 rc.cpp:1913 rc.cpp:4582
#: rc.cpp:5228 rc.cpp:6709 rc.cpp:6769 rc.cpp:8170
#, no-c-format
msgid "Type"
msgstr "Type"
#. i18n: file ./parts/ctags2/ctags2_widgetbase.ui line 69
#: rc.cpp:1919
#, no-c-format
msgid ""
"Result view for a tag lookup. Click a line to go to the corresponding place in "
"the code."
msgstr ""
"Resultatvisning for et tag-oppslag. Trykk på en linje for å gå til tilsvarende "
"sted i koden."
#. i18n: file ./parts/ctags2/ctags2_widgetbase.ui line 85
#: languages/cpp/problemreporter.cpp:141 languages/php/phperrorview.cpp:132
#: rc.cpp:1922
#, no-c-format
msgid "Lookup:"
msgstr "Oppslag:"
#. i18n: file ./parts/ctags2/ctags2_widgetbase.ui line 93
#: rc.cpp:1925
#, no-c-format
msgid ""
"Type the identifier you want to lookup. "
"<p> The identifier will populate and display a reducing list as you type."
msgstr ""
"Oppgi identifikatoren du vil slå opp. "
"<p>Identifikatoren vil fylle og vise en liste som reduseres ettersom du "
"skriver."
#. i18n: file ./parts/ctags2/ctags2_widgetbase.ui line 101
#: rc.cpp:1928
#, no-c-format
msgid "Hits:"
msgstr "Treff:"
#. i18n: file ./parts/ctags2/ctags2_widgetbase.ui line 126
#: rc.cpp:1931
#, no-c-format
msgid "Date:"
msgstr "Dato:"
#. i18n: file ./parts/ctags2/ctags2_widgetbase.ui line 137
#: rc.cpp:1934
#, no-c-format
msgid "Regenerate"
msgstr "Lag på nytt"
#. i18n: file ./parts/ctags2/ctags2_widgetbase.ui line 140
#: rc.cpp:1937
#, no-c-format
msgid ""
"Press to regenerate CTags database."
"<p>This will take some time on a large project."
msgstr ""
"Trykk for å lage CTags-databasen om igjen. "
"<p>Dette tar litt tid i et stort prosjekt."
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 16
#: rc.cpp:1940
#, no-c-format
msgid "Test Regular Expression"
msgstr "Test regulært uttrykk"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 30
#: rc.cpp:1943
#, no-c-format
msgid "&Regular expression:"
msgstr "&Regulært uttrykk:"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 41
#: rc.cpp:1946
#, no-c-format
msgid "&Test string:"
msgstr "&Teststreng:"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 52
#: rc.cpp:1949
#, no-c-format
msgid "Enter a string which will be matched against the regular expression"
msgstr "Oppgi en streng som vil bli prøvet mot det regulære uttrykket"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 87
#: rc.cpp:1952
#, no-c-format
msgid "&Insert Quoted"
msgstr "Sett &inn sitert"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 93
#: rc.cpp:1955
#, no-c-format
msgid ""
"Inserts the regular expression into the currently opened source code file. "
"Escapes any special characters like backslash."
msgstr ""
"Setter inn det regulære uttrykket i den kildekodefila som er åpen nå. Spesielle "
"tegn blir beskyttet, slik som venstreskråstrek."
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 124
#: rc.cpp:1961
#, no-c-format
msgid "Closes the dialog"
msgstr "Lukker dialogen"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 134
#: rc.cpp:1964
#, no-c-format
msgid ""
"enter a regular expression, for example <tt>KD.*</tt>"
", which matches all strings beginning with \"KD\""
msgstr ""
"oppgi et regulært uttrykk, for eksempel <tt>KD.*</tt>"
", som treffer alle strenger som begynner med «KD»"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 150
#: rc.cpp:1967
#, no-c-format
msgid "Regular Expression T&ype"
msgstr "T&ype regulært uttrykk"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 161
#: rc.cpp:1970
#, no-c-format
msgid "&Basic POSIX syntax (used by grep)"
msgstr "&Grunnleggende POSIX-syntaks (som i grep)"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 167
#: rc.cpp:1973 rc.cpp:1979
#, no-c-format
msgid "A description of this syntax can be found in the grep manpage"
msgstr "En beskrivelse av denne syntaksen finnes på mansida for grep"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 175
#: rc.cpp:1976
#, no-c-format
msgid "E&xtended POSIX syntax (used by egrep)"
msgstr "Ut&videt POSIX-syntaks (som i egrep)"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 186
#: rc.cpp:1982
#, no-c-format
msgid "&QRegExp syntax"
msgstr "&QRegExp syntaks"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 189
#: rc.cpp:1985
#, no-c-format
msgid ""
"A description of this syntax can be found in the documentation of the QRegExp "
"class"
msgstr ""
"Beskrivelse av denne syntaksen finnes i dokumentasjonen for klassen QRegExp"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 197
#: rc.cpp:1988
#, no-c-format
msgid "QRegExp syntax (&minimal)"
msgstr "QRegExp syntaks (&minimal)"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 200
#: rc.cpp:1991
#, no-c-format
msgid ""
"Matches a QRegExp non-greedy. Please read the QRegExp::setMinimal documentation "
"for more details."
msgstr ""
"Finner en QRegExp uten grådighet. Les mer i dokumentasjonen for "
"QRegExp::SetMinimal."
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 208
#: rc.cpp:1994
#, no-c-format
msgid "&KRegExp syntax"
msgstr "&KRegExp-syntaks"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 211
#: rc.cpp:1997
#, no-c-format
msgid "A description of this syntax can be found in the TDE API documentation."
msgstr ""
"En beskrivelse av denne syntaksen finnes i API-dokumentasjonen for TDE."
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 240
#: rc.cpp:2003
#, no-c-format
msgid "Matched subgroups:"
msgstr "Samsvarende undergrupper:"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 257
#: buildtools/qmake/projectconfigurationdlg.cpp:1796
#: kdevdesigner/designer/propertyeditor.cpp:2923
#: languages/cpp/debugger/variablewidget.cpp:223
#: languages/ruby/debugger/variablewidget.cpp:146
#: lib/widgets/propeditor/propertyeditor.cpp:173
#: parts/partexplorer/partexplorerform.cpp:118 rc.cpp:2009 rc.cpp:2217
#: rc.cpp:2229 rc.cpp:2451 rc.cpp:3189 rc.cpp:3709
#, no-c-format
msgid "Value"
msgstr "Verdi"
#. i18n: file ./parts/regexptest/regexptestdlgbase.ui line 284
#: rc.cpp:2012
#, no-c-format
msgid ""
"Shows which groups were matched. See the corresponding documentation for how "
"groups are matched."
msgstr ""
"Viser hvilke undergrupper som passet sammen. Se tilsvarende dokumentasjon om "
"hvordan gruppene settes sammen."
#. i18n: file ./parts/outputviews/filterdlg.ui line 16
#: rc.cpp:2015
#, no-c-format
msgid "Output Filter Settings"
msgstr "Innstillinger for utdata-filter"
#. i18n: file ./parts/outputviews/filterdlg.ui line 94
#: rc.cpp:2024
#, fuzzy, no-c-format
msgid "Filter"
msgstr "Filtrert"
#. i18n: file ./parts/outputviews/filterdlg.ui line 111
#: rc.cpp:2027
#, no-c-format
msgid "Only show lines matching:"
msgstr ""
#. i18n: file ./parts/outputviews/filterdlg.ui line 127
#: parts/grepview/grepdlg.cpp:127 rc.cpp:2030 rc.cpp:2042
#, no-c-format
msgid "C&ase sensitive"
msgstr "Skill mellom sm&å og store "
#. i18n: file ./parts/outputviews/filterdlg.ui line 135
#: rc.cpp:2033
#, fuzzy, no-c-format
msgid "Re&gular expression"
msgstr "Regulært &uttrykk:"
#. i18n: file ./parts/replace/replacedlg.ui line 30
#: rc.cpp:2036
#, no-c-format
msgid "Project Wide String Replacement"
msgstr "Strengerstatning gjennom hele prosjektet"
#. i18n: file ./parts/replace/replacedlg.ui line 80
#: rc.cpp:2045
#, no-c-format
msgid "All s&ubstrings"
msgstr "Alle &delstrenger"
#. i18n: file ./parts/replace/replacedlg.ui line 91
#: rc.cpp:2048
#, fuzzy, no-c-format
msgid "Whole words onl&y"
msgstr "Bare &hele ord"
#. i18n: file ./parts/replace/replacedlg.ui line 107
#: rc.cpp:2051
#, no-c-format
msgid "Regular e&xpression:"
msgstr "Regulært &uttrykk:"
#. i18n: file ./parts/replace/replacedlg.ui line 110
#: rc.cpp:2054
#, no-c-format
msgid "Use regexp to specify target"
msgstr "Bruk regulært uttrykk til å oppgi målet"
#. i18n: file ./parts/replace/replacedlg.ui line 121
#: rc.cpp:2057
#, fuzzy, no-c-format
msgid "E&dit"
msgstr "Redigerer"
#. i18n: file ./parts/replace/replacedlg.ui line 124
#: rc.cpp:2060
#, no-c-format
msgid "Opens the regexp editor. Only enabled if installed."
msgstr ""
"Åpner redigering av regulært uttrykk. Bare mulig hvis det er installert."
#. i18n: file ./parts/replace/replacedlg.ui line 139
#: rc.cpp:2063
#, no-c-format
msgid "Enter the regexp here"
msgstr "Skriv inn det regulære uttrykket her"
#. i18n: file ./parts/replace/replacedlg.ui line 149
#: rc.cpp:2066
#, no-c-format
msgid "Target Files in Project"
msgstr "Målfiler i prosjektet"
#. i18n: file ./parts/replace/replacedlg.ui line 160
#: rc.cpp:2069
#, no-c-format
msgid "A&ll files"
msgstr "A&lle filer"
#. i18n: file ./parts/replace/replacedlg.ui line 166
#: rc.cpp:2072
#, no-c-format
msgid "All files in the project will be considered."
msgstr "Alle filer i prosjektet vil bli tatt i betraktning."
#. i18n: file ./parts/replace/replacedlg.ui line 174
#: rc.cpp:2075
#, no-c-format
msgid "&Open files only"
msgstr "&Kun åpne filer"
#. i18n: file ./parts/replace/replacedlg.ui line 177
#: rc.cpp:2078
#, no-c-format
msgid "Only open project files will be considered."
msgstr "Bare åpne filer blir tatt i betraktning."
#. i18n: file ./parts/replace/replacedlg.ui line 185
#: rc.cpp:2081
#, no-c-format
msgid "Files under &path:"
msgstr "Filer under &stien:"
#. i18n: file ./parts/replace/replacedlg.ui line 188
#: rc.cpp:2084
#, no-c-format
msgid "Only project files in this dir and its subdirs will be considered."
msgstr ""
"Bare prosjektfiler i denne mappa og undermapper blir tatt i betraktning."
#. i18n: file ./parts/replace/replacedlg.ui line 219
#: rc.cpp:2087
#, no-c-format
msgid "Expression is invalid."
msgstr "Uttrykket er ikke gyldig."
#. i18n: file ./parts/replace/replacedlg.ui line 244
#: rc.cpp:2090
#, fuzzy, no-c-format
msgid "Fi&nd"
msgstr "Finn"
#. i18n: file ./parts/replace/replacedlg.ui line 250
#: rc.cpp:2093
#, no-c-format
msgid "Start looking for possible replacement targets."
msgstr "Begynn leting etter mulige mål for erstatning."
#. i18n: file ./parts/replace/replacedlg.ui line 268
#: rc.cpp:2099
#, no-c-format
msgid "Strings"
msgstr "Strenger"
#. i18n: file ./parts/replace/replacedlg.ui line 279
#: rc.cpp:2102
#, no-c-format
msgid "&Text to find:"
msgstr "&Søk etter:"
#. i18n: file ./parts/replace/replacedlg.ui line 290
#: rc.cpp:2105
#, no-c-format
msgid "Target string"
msgstr "Målstreng"
#. i18n: file ./parts/replace/replacedlg.ui line 298
#: rc.cpp:2108
#, no-c-format
msgid "&Replacement text:"
msgstr "&Erstatningstekst:"
#. i18n: file ./parts/replace/replacedlg.ui line 309
#: rc.cpp:2111
#, no-c-format
msgid "The replacement string"
msgstr "Erstatningsteksten"
#. i18n: file ./parts/scripting/scriptingglobalconfigbase.ui line 16
#: parts/scripting/scriptingpart.cpp:57 rc.cpp:2114
#, no-c-format
msgid "Scripting"
msgstr "Skripting"
#. i18n: file ./parts/scripting/scriptingglobalconfigbase.ui line 27
#: rc.cpp:2117
#, no-c-format
msgid "Search Custom Directories for Scripts"
msgstr "Søk i selvvalgte mapper etter skripter"
#. i18n: file ./parts/scripting/scriptingglobalconfigbase.ui line 41
#: rc.cpp:2120
#, no-c-format
msgid ""
"<b>NOTE</b> These are directories to search in that are found in your TDE "
"resource directories. So if you add the string \"kate/scripts\" to the list "
"then KScript will look in \"$TDEDIRS/data/kate/scripts\" for scripts. This "
"will allow you to get scripts in your home directory as well as system wide "
"ones."
msgstr ""
"<b>MERK</b> Dette er mapper det skal søkes i som finnes i dine ressursmapper "
"for TDE. Så hvis du legger til strengen «kate/scripts» i lista, så vil KScript "
"se etter skripter i «$TDEDIRS/data/kate/scripts». "
#. i18n: file ./editors/editor-chooser/editchooser.ui line 24
#: rc.cpp:2123
#, no-c-format
msgid "&Embedded Editor"
msgstr "&Innebygget redigerer"
#. i18n: file ./editors/editor-chooser/editchooser.ui line 41
#: rc.cpp:2126
#, no-c-format
msgid ""
"<i>Note:</i> Changing the preferred editor will not affect\n"
"already open files."
msgstr ""
"<i>Merk:</i> Om foretrukket redigeringsprogram endres, så\n"
"påvirkes ikke filer som allerede er åpne."
#. i18n: file ./editors/editor-chooser/editchooser.ui line 51
#: rc.cpp:2130
#, no-c-format
msgid "On External Changes"
msgstr "Ved eksterne endringer"
#. i18n: file ./editors/editor-chooser/editchooser.ui line 57
#: rc.cpp:2133
#, no-c-format
msgid ""
"<p><b>Action to take when an open file is changed on disk</b></p>\n"
"<p><b>Do nothing</b> - The file will be marked as externally changed and the "
"user will be asked to verify any attempt to overwrite it </p>\n"
"<p><b>Alert the user</b> - A dialog will alert the user that a file has changed "
"and offer the user to reload the file</p>\n"
"<p><b>Automatically reload</b> - Any files that are not modified in memory are "
"reloaded, and an alert is shown for any conflicts</p>"
msgstr ""
"<p><b>Det som skal gjøres når en åpen fil endres på disken</b></p>\n"
"<p><b>Ingen ting</b> Fila blir markert som endret eksternt og brukeren blir "
"bedt om å bekrefte alle forsøk på å overskrive den.</p>\n"
"<p><b>Varsle bruker</b>- en sprettoppsdialog varsler brukeren om at en fil er "
"blitt endret og tilbyr å laste inn fila på nytt</p>\n"
"<p><b>Automatisk omlasting</b> Alle filer som ikke er endret i minnet blir "
"lastet inn på nytt, og det vises advarsler for alle konflikter som oppstår</p>"
#. i18n: file ./editors/editor-chooser/editchooser.ui line 68
#: rc.cpp:2139
#, fuzzy, no-c-format
msgid "&Do nothing"
msgstr "Ingen ting"
#. i18n: file ./editors/editor-chooser/editchooser.ui line 82
#: rc.cpp:2142
#, fuzzy, no-c-format
msgid "&Alert the user"
msgstr "Varsle bruker"
#. i18n: file ./editors/editor-chooser/editchooser.ui line 90
#: rc.cpp:2145
#, fuzzy, no-c-format
msgid "Automatically reload the file &if safe, alert the user if not"
msgstr "Automatisk omlasting hvis det er trygt, ellers varsle bruker"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 38
#: rc.cpp:2148
#, no-c-format
msgid "Graphic Filter"
msgstr "Grafisk filter"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 50
#: rc.cpp:2151
#, no-c-format
msgid "Normal mode"
msgstr "Normalmodus"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 58
#: rc.cpp:2154
#, no-c-format
msgid "TV mode"
msgstr "TV-modus"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 66
#: rc.cpp:2157
#, no-c-format
msgid "2xSaI"
msgstr "2xSaI"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 74
#: rc.cpp:2160
#, no-c-format
msgid "Super 2xSal"
msgstr "Super 2xSal"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 82
#: rc.cpp:2163
#, no-c-format
msgid "Super Eagle"
msgstr "Super-ørn"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 92
#: rc.cpp:2166
#, no-c-format
msgid "GBA binary:"
msgstr "GBA binær:"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 105
#: rc.cpp:2169
#, no-c-format
msgid "Additional parameters:"
msgstr "Flere parametre:"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 113
#: rc.cpp:2172
#, no-c-format
msgid "VisualBoy Advance (emulator):"
msgstr "VisualBoy Advance (emulator):"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 135
#: lib/widgets/propeditor/pfontbutton.cpp:43
#: lib/widgets/propeditor/ppixmapedit.cpp:54 rc.cpp:2175 rc.cpp:2919
#: rc.cpp:2925 rc.cpp:2931 rc.cpp:3069 rc.cpp:3072 rc.cpp:3132 rc.cpp:3150
#: rc.cpp:3165 rc.cpp:3832 rc.cpp:3980 rc.cpp:4293 rc.cpp:4308 rc.cpp:4612
#: rc.cpp:4618 rc.cpp:5433 rc.cpp:5490 rc.cpp:5574 rc.cpp:5673 rc.cpp:5811
#: rc.cpp:5883 rc.cpp:6691 rc.cpp:7866 rc.cpp:8034 rc.cpp:8128 rc.cpp:8137
#: rc.cpp:8143
#, no-c-format
msgid "..."
msgstr " …"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 157
#: rc.cpp:2178
#, no-c-format
msgid "Scaling"
msgstr "Skalering"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 169
#: rc.cpp:2181
#, no-c-format
msgid "1x"
msgstr "1x"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 177
#: rc.cpp:2184
#, no-c-format
msgid "2x"
msgstr "2x"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 185
#: rc.cpp:2187
#, no-c-format
msgid "3x"
msgstr "3x"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 193
#: rc.cpp:2190
#, no-c-format
msgid "4x"
msgstr "4x"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 203
#: rc.cpp:2193
#, no-c-format
msgid "Full screen"
msgstr "Full skjerm"
#. i18n: file ./embedded/visualboyadvance/vbaconfigwidgetbase.ui line 211
#: rc.cpp:2196
#, no-c-format
msgid "Start in external terminal"
msgstr "Start i ekstern terminal"
#. i18n: file ./buildtools/script/scriptoptionswidgetbase.ui line 16
#: buildtools/script/scriptprojectpart.cpp:75 rc.cpp:2199
#, no-c-format
msgid "Script Project Options"
msgstr "Valg for prosjektskript"
#. i18n: file ./buildtools/script/scriptoptionswidgetbase.ui line 27
#: rc.cpp:2202
#, no-c-format
msgid "&Include files into the project with the following patterns:"
msgstr "&Inkluder filer med følgende mønster i prosjektet:"
#. i18n: file ./buildtools/script/scriptoptionswidgetbase.ui line 90
#: rc.cpp:2205
#, no-c-format
msgid "&Exclude the following patterns:"
msgstr "&Ekskluder følgende mønstre:"
#. i18n: file ./buildtools/lib/widgets/environmentdisplaydialogbase.ui line 16
#: rc.cpp:2208
#, fuzzy, no-c-format
msgid "Environment"
msgstr "Mi&ljøvariabler:"
#. i18n: file ./buildtools/lib/widgets/environmentdisplaydialogbase.ui line 27
#: rc.cpp:2211
#, fuzzy, no-c-format
msgid "Current Environment"
msgstr "Nåværende dokument"
#. i18n: file ./buildtools/lib/widgets/environmentdisplaydialogbase.ui line 36
#: languages/bash/bashsupport_part.cpp:283
#: languages/cpp/debugger/variablewidget.cpp:222
#: languages/kjssupport/kjssupport_part.cpp:384
#: languages/kjssupport/kjssupport_part.cpp:411
#: languages/ruby/debugger/variablewidget.cpp:145
#: parts/classview/classtreebase.cpp:69 rc.cpp:2214 rc.cpp:4001
#, no-c-format
msgid "Variable"
msgstr "Variabel"
#. i18n: file ./buildtools/lib/widgets/environmentvariableswidgetbase.ui line 16
#: rc.cpp:2223
#, no-c-format
msgid "Environment Variables"
msgstr "Miljøvariabler"
#. i18n: file ./buildtools/lib/widgets/environmentvariableswidgetbase.ui line 111
#: rc.cpp:2238
#, no-c-format
msgid "A&dd / Copy"
msgstr "Le&gg til / kopier"
#. i18n: file ./buildtools/lib/widgets/environmentvariableswidgetbase.ui line 136
#: rc.cpp:2241
#, fuzzy, no-c-format
msgid "E&nvironment"
msgstr "Mi&ljøvariabler:"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 16
#: buildtools/autotools/autoprojectpart.cpp:233
#: buildtools/custommakefiles/customprojectpart.cpp:200
#: buildtools/pascal/pascalproject_part.cpp:403
#: buildtools/qmake/trollprojectpart.cpp:273
#: embedded/visualboyadvance/visualboyadvance_part.cpp:71 rc.cpp:2244
#, no-c-format
msgid "Run Options"
msgstr "Parametre for kjøring"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 35
#: rc.cpp:2247
#, fuzzy, no-c-format
msgid "Main Program"
msgstr "H&ovedprogram"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 52
#: rc.cpp:2250
#, no-c-format
msgid "Note: These options override target specific settings."
msgstr ""
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 58
#: rc.cpp:2253
#, no-c-format
msgid ""
"For Automake and QMake type projects, the proper way to set these options are "
"per target in the <b>Automake Manager</b> and <b>QMake Manager</b>"
", respectively."
msgstr ""
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 66
#: rc.cpp:2256
#, fuzzy, no-c-format
msgid "The command line arguments passed to the main program when run"
msgstr "Kommandolinje-argumenter til hovedprogrammet"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 74
#: rc.cpp:2259
#, fuzzy, no-c-format
msgid "Run Arg&uments:"
msgstr "Ar&gumenter:"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 85
#: rc.cpp:2262
#, fuzzy, no-c-format
msgid "Executa&ble:"
msgstr "Programfil:"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 96
#: rc.cpp:2265
#, fuzzy, no-c-format
msgid "Full path to the executable"
msgstr "Stryk symbolene fra programfila"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 104
#: rc.cpp:2268
#, fuzzy, no-c-format
msgid "Debug Ar&guments:"
msgstr "Ar&gumenter:"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 115
#: rc.cpp:2271
#, fuzzy, no-c-format
msgid "The command line arguments passed to the main program when debugged"
msgstr "Kommandolinje-argumenter til hovedprogrammet"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 123
#: rc.cpp:2274
#, fuzzy, no-c-format
msgid "Working &Directory:"
msgstr "&Mappe:"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 134
#: rc.cpp:2277
#, no-c-format
msgid "Sets the current working directory for the launched process"
msgstr ""
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 163
#: rc.cpp:2283
#, fuzzy, no-c-format
msgid "Automaticall&y compile before execution"
msgstr "Kom&piler automatisk før kjøring"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 166
#: rc.cpp:2286
#, no-c-format
msgid ""
"If the program is not up-to-date with the source code, compile it before "
"starting its execution"
msgstr ""
"Hvis programmet ikke er oppdatert i følge kildekoden, så kompiler det før "
"kjøringen starter"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 174
#: rc.cpp:2289
#, fuzzy, no-c-format
msgid "&Automatically install before execution"
msgstr "Kom&piler automatisk før kjøring"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 185
#: rc.cpp:2292
#, no-c-format
msgid "Use &tdesu when installing"
msgstr ""
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 196
#: rc.cpp:2295
#, fuzzy, no-c-format
msgid "Start in e&xternal terminal"
msgstr "Start i ekstern terminal"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 199
#: rc.cpp:2298
#, fuzzy, no-c-format
msgid "Start the main program in an external terminal"
msgstr "Start hovedprogrammet i et eksternt terminalvindu (konsole)"
#. i18n: file ./buildtools/lib/widgets/runoptionswidgetbase.ui line 209
#: rc.cpp:2301 rc.cpp:2313 rc.cpp:3120 rc.cpp:3889 rc.cpp:3919
#, no-c-format
msgid "Environment &Variables"
msgstr "Miljø&variabler"
#. i18n: file ./buildtools/lib/widgets/makeoptionswidgetbase.ui line 16
#: buildtools/autotools/autoprojectpart.cpp:234
#: buildtools/qmake/trollprojectpart.cpp:276 rc.cpp:2304 rc.cpp:3850
#: rc.cpp:3892
#, no-c-format
msgid "Make Options"
msgstr "Make-innstillinger"
#. i18n: file ./buildtools/lib/widgets/makeoptionswidgetbase.ui line 27
#: rc.cpp:2307
#, no-c-format
msgid "&Abort on first error"
msgstr "&Avbryt ved første feil"
#. i18n: file ./buildtools/lib/widgets/makeoptionswidgetbase.ui line 35
#: rc.cpp:2310
#, no-c-format
msgid "Onl&y display commands without actually executing them"
msgstr "Bare v&is kommandoer uten virkelig å kjøre dem"
#. i18n: file ./buildtools/lib/widgets/makeoptionswidgetbase.ui line 51
#: rc.cpp:2316
#, no-c-format
msgid "&Name of make executable:"
msgstr "&Navn på make-programmet:"
#. i18n: file ./buildtools/lib/widgets/makeoptionswidgetbase.ui line 92
#: rc.cpp:2319
#, no-c-format
msgid "Num&ber of jobs to run simultaneously:"
msgstr "Antall samtidige jo&bber:"
#. i18n: file ./buildtools/lib/widgets/makeoptionswidgetbase.ui line 137
#: rc.cpp:2322
#, no-c-format
msgid "Run more than one &job at a time"
msgstr "Kjør mer enn en &jobb av gangen"
#. i18n: file ./buildtools/lib/widgets/makeoptionswidgetbase.ui line 145
#: rc.cpp:2325
#, no-c-format
msgid "Make priority:"
msgstr "Make-prioritet:"
#. i18n: file ./buildtools/lib/widgets/removesubprojectdlgbase.ui line 16
#: rc.cpp:2328
#, no-c-format
msgid "[REMOVE SUBPROJECT]"
msgstr "[SLETT UNDERPROSJEKT]"
#. i18n: file ./buildtools/lib/widgets/removesubprojectdlgbase.ui line 42
#: rc.cpp:2331
#, no-c-format
msgid "&Information"
msgstr "&Informasjon"
#. i18n: file ./buildtools/lib/widgets/removesubprojectdlgbase.ui line 53
#: rc.cpp:2334 rc.cpp:2721 rc.cpp:2808
#, no-c-format
msgid "[REMOVE QUESTION]"
msgstr "[SLETT SPØRSMÅL]"
#. i18n: file ./buildtools/lib/widgets/removesubprojectdlgbase.ui line 61
#: rc.cpp:2337 rc.cpp:2724 rc.cpp:2811
#, no-c-format
msgid "Also &remove it from disk"
msgstr "Fje&rn også fra disk"
#. i18n: file ./buildtools/lib/widgets/removesubprojectdlgbase.ui line 75
#: rc.cpp:2340
#, no-c-format
msgid "<b>Note:</b> You will not be able to undo this operation."
msgstr "<b>Merk:</b> det er ikke mulig å angre denne handlingen."
#. i18n: file ./buildtools/lib/widgets/subclassesdlgbase.ui line 16
#: rc.cpp:2349
#, no-c-format
msgid "Related Subclasses"
msgstr "Relaterte subklasser"
#. i18n: file ./buildtools/lib/widgets/subclassesdlgbase.ui line 30
#: rc.cpp:2352
#, no-c-format
msgid "&Add Relation"
msgstr "Legg til rel&asjon"
#. i18n: file ./buildtools/lib/widgets/subclassesdlgbase.ui line 41
#: rc.cpp:2355
#, no-c-format
msgid "&Remove Relation"
msgstr "Fje&rn relasjon"
#. i18n: file ./buildtools/lib/widgets/subclassesdlgbase.ui line 96
#: rc.cpp:2358
#, no-c-format
msgid "Related subclass &location:"
msgstr "Sted for re&laterte subklasser:"
#. i18n: file ./buildtools/lib/parsers/autotools/tests/viewerbase.ui line 16
#: rc.cpp:2367 rc.cpp:2391
#, no-c-format
msgid "Viewer"
msgstr "Fremviser"
#. i18n: file ./buildtools/lib/parsers/autotools/tests/viewerbase.ui line 60
#: rc.cpp:2370 rc.cpp:2400
#, no-c-format
msgid "Parse Tree"
msgstr "Tolk tre"
#. i18n: file ./buildtools/lib/parsers/autotools/tests/viewerbase.ui line 80
#: rc.cpp:2376 rc.cpp:2406
#, no-c-format
msgid "Value 1"
msgstr "Verdi 1"
#. i18n: file ./buildtools/lib/parsers/autotools/tests/viewerbase.ui line 91
#: rc.cpp:2379 rc.cpp:2409
#, no-c-format
msgid "Value 2"
msgstr "Verdi 2"
#. i18n: file ./buildtools/lib/parsers/autotools/tests/viewerbase.ui line 111
#: rc.cpp:2382 rc.cpp:2415
#, no-c-format
msgid "Source to Be Written Back"
msgstr "Kilde som skal skrives tilbake"
#. i18n: file ./buildtools/lib/parsers/autotools/tests/viewerbase.ui line 149
#: rc.cpp:2385 rc.cpp:2394
#, no-c-format
msgid "Add All From Directory"
msgstr "Legg til alle fra mappa"
#. i18n: file ./buildtools/lib/parsers/autotools/tests/viewerbase.ui line 163
#: rc.cpp:2388 rc.cpp:2397
#, no-c-format
msgid "Choose File to Add..."
msgstr "Velg fil som skal legges til …"
#. i18n: file ./buildtools/lib/parsers/qmake/tests/viewerbase.ui line 179
#: rc.cpp:2412
#, no-c-format
msgid "Value 3"
msgstr "Verdi 3"
#. i18n: file ./buildtools/autotools/addservicedlgbase.ui line 16
#: rc.cpp:2418
#, no-c-format
msgid "Add New Service"
msgstr "Legg til ny tjeneste"
#. i18n: file ./buildtools/autotools/addservicedlgbase.ui line 31
#: rc.cpp:2421
#, no-c-format
msgid "&Service File"
msgstr "Tjene&stefil"
#. i18n: file ./buildtools/autotools/addservicedlgbase.ui line 55
#: rc.cpp:2424 rc.cpp:2529
#, no-c-format
msgid "&Icon:"
msgstr "&Ikon:"
#. i18n: file ./buildtools/autotools/addservicedlgbase.ui line 139
#: rc.cpp:2427
#, no-c-format
msgid "&Library:"
msgstr "Bib&liotek:"
#. i18n: file ./buildtools/autotools/addservicedlgbase.ui line 157
#: buildtools/script/scriptnewfiledlg.cpp:38
#: parts/filecreate/filecreate_newfile.cpp:46 rc.cpp:2430 rc.cpp:2535
#: rc.cpp:7736 rc.cpp:8031
#, no-c-format
msgid "&File name:"
msgstr "&Filnavn:"
#. i18n: file ./buildtools/autotools/addservicedlgbase.ui line 193
#: rc.cpp:2436 rc.cpp:2541 rc.cpp:4850 rc.cpp:8846
#, no-c-format
msgid "Co&mment:"
msgstr "Ko&mmentar:"
#. i18n: file ./buildtools/autotools/addservicedlgbase.ui line 209
#: rc.cpp:2439
#, no-c-format
msgid "Service &Types"
msgstr "Tjeneste&typer"
#. i18n: file ./buildtools/autotools/addservicedlgbase.ui line 289
#: rc.cpp:2442 rc.cpp:2547 rc.cpp:6327 rc.cpp:6330
#, no-c-format
msgid "<-"
msgstr "<-"
#. i18n: file ./buildtools/autotools/addservicedlgbase.ui line 297
#: rc.cpp:2445 rc.cpp:2550 rc.cpp:6342 rc.cpp:6345
#, no-c-format
msgid "->"
msgstr "->"
#. i18n: file ./buildtools/autotools/addservicedlgbase.ui line 351
#: kdevdesigner/designer/propertyeditor.cpp:2922
#: parts/partexplorer/partexplorerform.cpp:116 rc.cpp:2448 rc.cpp:3186
#: rc.cpp:4579
#, no-c-format
msgid "Property"
msgstr "Egenskap"
#. i18n: file ./buildtools/autotools/addservicedlgbase.ui line 406
#: rc.cpp:2454 rc.cpp:3183
#, no-c-format
msgid "&Properties:"
msgstr "&Egenskaper:"
#. i18n: file ./buildtools/autotools/addsubprojectdlgbase.ui line 36
#: rc.cpp:2463
#, no-c-format
msgid "Add New Subproject"
msgstr "Legg til nytt underprosjekt"
#. i18n: file ./buildtools/autotools/addsubprojectdlgbase.ui line 47
#: rc.cpp:2466
#, no-c-format
msgid "Subproject"
msgstr "Underprosjekt"
#. i18n: file ./buildtools/autotools/addsubprojectdlgbase.ui line 87
#: rc.cpp:2469
#, no-c-format
msgid "Subproject &name:"
msgstr "Underprosjekt&navn:"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 16
#: rc.cpp:2478
#, no-c-format
msgid "Add New Application .desktop File"
msgstr "Legg til ny .desktop-fil for programmet"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 30
#: rc.cpp:2481
#, no-c-format
msgid "&Application File"
msgstr "Progr&amfil"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 41
#: rc.cpp:2484
#, no-c-format
msgid "Start in t&erminal"
msgstr "Starter i t&erminal"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 122
#: rc.cpp:2490
#, no-c-format
msgid "Games"
msgstr "Spill"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 127
#: rc.cpp:2493
#, no-c-format
msgid "Development"
msgstr "Utvikling"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 132
#: rc.cpp:2496 rc.cpp:8595
#, no-c-format
msgid "Editors"
msgstr "Redigering"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 137
#: rc.cpp:2499
#, no-c-format
msgid "Graphics"
msgstr "Bilde"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 142
#: rc.cpp:2502
#, no-c-format
msgid "Internet"
msgstr "Internett"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 147
#: rc.cpp:2505
#, no-c-format
msgid "Multimedia"
msgstr "Multimedia"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 152
#: rc.cpp:2508
#, no-c-format
msgid "Office"
msgstr "Kontor"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 157
#: rc.cpp:2511 rc.cpp:4829 rc.cpp:7277
#, no-c-format
msgid "Settings"
msgstr "Innstillinger"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 162
#: rc.cpp:2514
#, no-c-format
msgid "System"
msgstr "System"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 167
#: rc.cpp:2517
#, no-c-format
msgid "Toys"
msgstr "Leketøy"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 172
#: rc.cpp:2520
#, no-c-format
msgid "Utilities"
msgstr "Verktøy"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 177
#: rc.cpp:2523
#, no-c-format
msgid "WordProcessing"
msgstr "Tekstbehandling"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 229
#: rc.cpp:2532
#, no-c-format
msgid "&Section:"
msgstr "&Del:"
#. i18n: file ./buildtools/autotools/addapplicationdlgbase.ui line 316
#: rc.cpp:2544
#, no-c-format
msgid "Mime &Types"
msgstr "Mime-&typer"
#. i18n: file ./buildtools/autotools/choosetargetdlgbase.ui line 22
#: buildtools/autotools/choosetargetdialog.cpp:62 rc.cpp:2559
#, no-c-format
msgid "Automake Manager - Choose Target"
msgstr "Automake-håndtering Velg mål"
#. i18n: file ./buildtools/autotools/choosetargetdlgbase.ui line 59
#: rc.cpp:2562
#, no-c-format
msgid "Add new files to m&y active target"
msgstr "Legg til n&ye filer i mitt aktive mål"
#. i18n: file ./buildtools/autotools/choosetargetdlgbase.ui line 70
#: rc.cpp:2565
#, no-c-format
msgid "Choose &another target"
msgstr "Velg et &annet mål"
#. i18n: file ./buildtools/autotools/choosetargetdlgbase.ui line 83
#: rc.cpp:2568
#, no-c-format
msgid "Choose &Target"
msgstr "Velg &mål"
#. i18n: file ./buildtools/autotools/choosetargetdlgbase.ui line 114
#: rc.cpp:2571 rc.cpp:2658 rc.cpp:2715 rc.cpp:2754 rc.cpp:2826
#, no-c-format
msgid "Target:"
msgstr "Mål:"
#. i18n: file ./buildtools/autotools/choosetargetdlgbase.ui line 130
#: rc.cpp:2574 rc.cpp:2760
#, no-c-format
msgid "[TARGET]"
msgstr "[MÅL]"
#. i18n: file ./buildtools/autotools/choosetargetdlgbase.ui line 140
#: rc.cpp:2577
#, no-c-format
msgid "&New Files"
msgstr "&Nye filer"
#. i18n: file ./buildtools/autotools/choosetargetdlgbase.ui line 159
#: rc.cpp:2580
#, no-c-format
msgid ""
"<qt><b>Note:</b> If you cancel, your files will be created but will <b>not</b> "
"be added to the project.</qt>"
msgstr ""
"<qt><b>Merk:</b> Hvis du avbryter, vil filene bli laget men <b>ikke</b> "
"lagt til i prosjektet.</qt>"
#. i18n: file ./buildtools/autotools/choosetargetdlgbase.ui line 172
#: rc.cpp:2583
#, no-c-format
msgid "Do &not ask me again and use always my active target"
msgstr "Ikke spør meg igje&n og bruk alltid mitt aktive mål"
#. i18n: file ./buildtools/autotools/addtargetdlgbase.ui line 16
#: rc.cpp:2586
#, no-c-format
msgid "Add New Target"
msgstr "Legg til nytt mål"
#. i18n: file ./buildtools/autotools/addtargetdlgbase.ui line 30
#: rc.cpp:2589
#, no-c-format
msgid "&Target"
msgstr "&Mål"
#. i18n: file ./buildtools/autotools/addtargetdlgbase.ui line 45
#: rc.cpp:2592
#, no-c-format
msgid "&Primary:"
msgstr "&Primær:"
#. i18n: file ./buildtools/autotools/addtargetdlgbase.ui line 68
#: rc.cpp:2595
#, no-c-format
msgid "Pre&fix:"
msgstr "&Prefiks:"
#. i18n: file ./buildtools/autotools/addtargetdlgbase.ui line 91
#: parts/quickopen/quickopenfiledialog.cpp:41
#: parts/quickopen/quickopenfiledialog.cpp:56 rc.cpp:2598
#, no-c-format
msgid "File &name:"
msgstr "Fil&navn:"
#. i18n: file ./buildtools/autotools/addtargetdlgbase.ui line 127
#: rc.cpp:2601
#, no-c-format
msgid "[CANONICALIZED NAME]"
msgstr "[CANONICALIZED NAME]"
#. i18n: file ./buildtools/autotools/addtargetdlgbase.ui line 170
#: rc.cpp:2604
#, no-c-format
msgid "Linker Flags (&LDFLAGS)"
msgstr "Lenkerflagg (&LDFLAGS)"
#. i18n: file ./buildtools/autotools/addtargetdlgbase.ui line 181
#: rc.cpp:2607
#, no-c-format
msgid "Do not link against shared libraries (-all-static)"
msgstr "Ikke link mot delte biblioteker (-all-static)"
#. i18n: file ./buildtools/autotools/addtargetdlgbase.ui line 189
#: rc.cpp:2610
#, no-c-format
msgid "Do not assign version numbers to libraries (-avoid-version)"
msgstr "Ikke tilordne versjonsnumre til biblioteker (-avoid-version)"
#. i18n: file ./buildtools/autotools/addtargetdlgbase.ui line 197
#: rc.cpp:2613
#, no-c-format
msgid "Create a library that can be dynamically loaded (-module)"
msgstr "Opprett et bibliotek som kan lastes dynamisk (-module)"
#. i18n: file ./buildtools/autotools/addtargetdlgbase.ui line 205
#: rc.cpp:2616
#, no-c-format
msgid "Library does not depend on external symbols (-no-undefined)"
msgstr "Biblioteket avhenger ikke av eksterne symboler (-no-undefined)"
#. i18n: file ./buildtools/autotools/addtargetdlgbase.ui line 228
#: rc.cpp:2619
#, no-c-format
msgid "Ot&her:"
msgstr "An&dre:"
#. i18n: file ./buildtools/autotools/managecustomcommandsbase.ui line 44
#: rc.cpp:2634
#, no-c-format
msgid "Menu Text"
msgstr "Menytekst"
#. i18n: file ./buildtools/autotools/managecustomcommandsbase.ui line 52
#: rc.cpp:2637
#, no-c-format
msgid "Command"
msgstr "Kommando"
#. i18n: file ./buildtools/autotools/managecustomcommandsbase.ui line 60
#: rc.cpp:2640
#, no-c-format
msgid "Command Type"
msgstr "Kommandotype"
#. i18n: file ./buildtools/autotools/addfiledlgbase.ui line 36
#: rc.cpp:2643
#, no-c-format
msgid "Add New Created File to Target"
msgstr "Legg til nyopprettet fil til målet"
#. i18n: file ./buildtools/autotools/addfiledlgbase.ui line 53
#: rc.cpp:2646 rc.cpp:2703 rc.cpp:2748 rc.cpp:2817
#, no-c-format
msgid "Subproject Information"
msgstr "Informasjon om underprosjekter"
#. i18n: file ./buildtools/autotools/addfiledlgbase.ui line 75
#: rc.cpp:2649 rc.cpp:2706
#, no-c-format
msgid "[TARGET DIRECTORY]"
msgstr "[TARGET DIRECTORY]"
#. i18n: file ./buildtools/autotools/addfiledlgbase.ui line 83
#: rc.cpp:2652 rc.cpp:2709 rc.cpp:2820
#, no-c-format
msgid "[TARGET NAME]"
msgstr "[TARGET NAME]"
#. i18n: file ./buildtools/autotools/addfiledlgbase.ui line 103
#: rc.cpp:2655 rc.cpp:2712 rc.cpp:2751 rc.cpp:2823
#, no-c-format
msgid "Directory:"
msgstr "Mappe:"
#. i18n: file ./buildtools/autotools/addfiledlgbase.ui line 135
#: rc.cpp:2661
#, no-c-format
msgid "File Information"
msgstr "Filinformasjon"
#. i18n: file ./buildtools/autotools/addfiledlgbase.ui line 173
#: buildtools/script/scriptnewfiledlg.cpp:46 rc.cpp:2664
#, no-c-format
msgid "&Use file template"
msgstr "Br&uk filmal"
#. i18n: file ./buildtools/autotools/addfiledlgbase.ui line 202
#: rc.cpp:2667
#, no-c-format
msgid "New file &name (with extension):"
msgstr "Nytt fil&navn (med etternavn):"
#. i18n: file ./buildtools/autotools/addicondlgbase.ui line 16
#: rc.cpp:2676
#, no-c-format
msgid "Add New Icon"
msgstr "Legg til nytt ikon"
#. i18n: file ./buildtools/autotools/addicondlgbase.ui line 35
#: rc.cpp:2679 rc.cpp:5325
#, no-c-format
msgid "&Type:"
msgstr "&Type:"
#. i18n: file ./buildtools/autotools/addicondlgbase.ui line 53
#: rc.cpp:2682
#, no-c-format
msgid "&Size:"
msgstr "&Størrelse:"
#. i18n: file ./buildtools/autotools/addicondlgbase.ui line 178
#: rc.cpp:2697
#, no-c-format
msgid "unknown"
msgstr "ukjent"
#. i18n: file ./buildtools/autotools/removetargetdlgbase.ui line 16
#: rc.cpp:2700
#, no-c-format
msgid "Remove Target From [SUBPROJECT]"
msgstr "Fjern mål fra [SUBPROJECT]"
#. i18n: file ./buildtools/autotools/removetargetdlgbase.ui line 116
#: rc.cpp:2718
#, no-c-format
msgid "&Target Information"
msgstr "&Målinformasjon"
#. i18n: file ./buildtools/autotools/removetargetdlgbase.ui line 149
#: rc.cpp:2727
#, no-c-format
msgid ""
"<b>Note:</b> You will not be able to undo this operation. Please check your "
"Makefile.am afterwards."
msgstr ""
"<b>Merk:</b> Det går ikke an å angre denne operasjonen. Kontroller Makefile.am "
"etterpå."
#. i18n: file ./buildtools/autotools/removetargetdlgbase.ui line 159
#: rc.cpp:2730
#, no-c-format
msgid "&Dependencies to Other Subprojects"
msgstr "&Avhengigheter til andre underprosjekter"
#. i18n: file ./buildtools/autotools/addexistingdlgbase.ui line 24
#: rc.cpp:2739
#, no-c-format
msgid "ImportExistingDlgBase"
msgstr "ImportExistingDlgBase"
#. i18n: file ./buildtools/autotools/addexistingdlgbase.ui line 192
#: rc.cpp:2757
#, no-c-format
msgid "[DIRECTORY]"
msgstr "[MAPPE]"
#. i18n: file ./buildtools/autotools/addexistingdlgbase.ui line 260
#: rc.cpp:2763
#, no-c-format
msgid "A&dd All"
msgstr "L&egg til alle"
#. i18n: file ./buildtools/autotools/addexistingdlgbase.ui line 263
#: rc.cpp:2766
#, no-c-format
msgid "Import by creating symbolic links (recommended)"
msgstr "Importer ved å lage symlenker (anbefales)"
#. i18n: file ./buildtools/autotools/addexistingdlgbase.ui line 271
#: rc.cpp:2769
#, no-c-format
msgid "&Add Selected"
msgstr "Le&gg til markerte"
#. i18n: file ./buildtools/autotools/addexistingdlgbase.ui line 274
#: rc.cpp:2772
#, no-c-format
msgid "Import by copying (not recommended)"
msgstr "Impoter ved kopiering (ikke anbefalt)"
#. i18n: file ./buildtools/autotools/addexistingdlgbase.ui line 313
#: rc.cpp:2775
#, no-c-format
msgid "&Source Directory"
msgstr "&Kildemappe"
#. i18n: file ./buildtools/autotools/addexistingdlgbase.ui line 364
#: rc.cpp:2778
#, no-c-format
msgid "R&emove All"
msgstr "Fj&ern alle"
#. i18n: file ./buildtools/autotools/addexistingdlgbase.ui line 367
#: rc.cpp:2781
#, no-c-format
msgid "Removes all added files."
msgstr "Fjerner alle filer som er lagt til"
#. i18n: file ./buildtools/autotools/addexistingdlgbase.ui line 375
#: rc.cpp:2784
#, no-c-format
msgid "&Remove Selected"
msgstr "Fje&rn markerte:"
#. i18n: file ./buildtools/autotools/addexistingdlgbase.ui line 378
#: rc.cpp:2787
#, no-c-format
msgid "Removes the selected files."
msgstr "Fjerner de valgte filene."
#. i18n: file ./buildtools/autotools/addexistingdlgbase.ui line 417
#: rc.cpp:2790
#, no-c-format
msgid "Add &Following"
msgstr "Legg til &følgende"
#. i18n: file ./buildtools/autotools/removefiledlgbase.ui line 16
#: rc.cpp:2796
#, no-c-format
msgid "Remove File From This Target"
msgstr "Fjern fil fra dette målet"
#. i18n: file ./buildtools/autotools/removefiledlgbase.ui line 79
#: rc.cpp:2805
#, no-c-format
msgid "&File Information"
msgstr "&Filinformasjon"
#. i18n: file ./buildtools/autotools/removefiledlgbase.ui line 120
#: rc.cpp:2814
#, no-c-format
msgid "<b>Note:</b> You will not be able to undelete the file."
msgstr "<b> Merk:</b> Det går ikke an å angre sletting av en fil."
#. i18n: file ./buildtools/autotools/removefiledlgbase.ui line 215
#: rc.cpp:2829
#, no-c-format
msgid "[DIRECTORY NAME]"
msgstr "[DIRECTORY NAME]"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 16
#: rc.cpp:2832
#, no-c-format
msgid "Target Options"
msgstr "Målvalg"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 34
#: rc.cpp:2835
#, fuzzy, no-c-format
msgid "Fl&ags"
msgstr "Flagg"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 49
#: rc.cpp:2838 rc.cpp:3087
#, no-c-format
msgid "Li&nker flags (LDFLAGS):"
msgstr "Li&nkerflagg (LDFLAGS):"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 71
#: rc.cpp:2841
#, fuzzy, no-c-format
msgid "&Do not link against shared libraries (-all-static)"
msgstr "Ikke link mot delte biblioteker (-all-static)"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 79
#: rc.cpp:2844
#, fuzzy, no-c-format
msgid "Do not &assign version numbers to libraries (-avoid-version)"
msgstr "Ikke tilordne versjonsnumre til biblioteker (-avoid-version)"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 87
#: rc.cpp:2847
#, fuzzy, no-c-format
msgid "Create a library that can &be dynamically loaded (-module)"
msgstr "Opprett et bibliotek som kan lastes dynamisk (-module)"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 95
#: rc.cpp:2850
#, fuzzy, no-c-format
msgid "Library does not depend on external symbols (-no-&undefined)"
msgstr "Biblioteket avhenger ikke av eksterne symboler (-no-undefined)"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 118
#: rc.cpp:2853
#, no-c-format
msgid "O&ther:"
msgstr "An&dre:"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 181
#: rc.cpp:2856
#, fuzzy, no-c-format
msgid "E&xplicit dependencies (DEPENDENCIES):"
msgstr "Uttrykk&elige avhengigheter (DEPENDENCIES):"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 228
#: rc.cpp:2859
#, fuzzy, no-c-format
msgid "Li&braries"
msgstr "Biblioteker"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 243
#: rc.cpp:2862
#, fuzzy, no-c-format
msgid "Lin&k convenience libraries inside project (LIBADD):"
msgstr "Lenk bekvemmelighetsbiblioteker inne i pro&sjektet (LIBADD):"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 294
#: rc.cpp:2865
#, no-c-format
msgid "Link libraries ou&tside project (LIBADD):"
msgstr "Lenk biblioteker u&tenfor prosjektet (LIBADD):"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 439
#: rc.cpp:2883
#, fuzzy, no-c-format
msgid "Mo&ve Up"
msgstr "Flytt &opp"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 447
#: rc.cpp:2886 rc.cpp:2961
#, no-c-format
msgid "Move Dow&n"
msgstr "Flytt &ned"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 476
#: rc.cpp:2889
#, no-c-format
msgid "Ar&guments"
msgstr "Ar&gumenter"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 487
#: rc.cpp:2892
#, fuzzy, no-c-format
msgid "Program Arguments (only valid for executable targets)"
msgstr "A&rgumenter for kjøring (bare for kjørbare mål):"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 507
#: rc.cpp:2895
#, fuzzy, no-c-format
msgid "&Run arguments:"
msgstr "Ar&gumenter:"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 523
#: rc.cpp:2898 rc.cpp:3373 rc.cpp:7764
#, fuzzy, no-c-format
msgid "Working Directory:"
msgstr "Mappe:"
#. i18n: file ./buildtools/autotools/targetoptionsdlgbase.ui line 535
#: rc.cpp:2901
#, fuzzy, no-c-format
msgid "&Debug arguments:"
msgstr "&Feilsøkingsflagg:"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 16
#: rc.cpp:2910
#, no-c-format
msgid "Subproject Options"
msgstr "Underprosjektvalg"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 31
#: rc.cpp:2913
#, no-c-format
msgid "Co&mpiler"
msgstr "Ko&mpilator"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 46
#: rc.cpp:2916
#, no-c-format
msgid "Compiler flags for C compiler (CFLA&GS):"
msgstr "Kompilatorflagg for C (CFLA&GS):"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 129
#: rc.cpp:2922
#, no-c-format
msgid "Compiler flags for C++ compiler (C&XXFLAGS):"
msgstr "Kompilatorflagg for C++ (C&XXFLAGS):"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 204
#: rc.cpp:2928
#, no-c-format
msgid "Compiler flags for Fortran compiler (&FFLAGS):"
msgstr "Kompilatorflagg for Fortran (&FFLAGS):"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 277
#: rc.cpp:2934
#, no-c-format
msgid "&Includes"
msgstr "&Includes"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 296
#: rc.cpp:2937
#, no-c-format
msgid "Automatically &generate metasources"
msgstr "&Lag meta-kilder automatisk"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 379
#: rc.cpp:2946
#, no-c-format
msgid "Directories in&side project:"
msgstr "Mapper inne i pro&sjektet:"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 471
#: rc.cpp:2958
#, no-c-format
msgid "Move U&p"
msgstr "Flytt o&pp"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 510
#: rc.cpp:2964
#, no-c-format
msgid "Directories ou&tside project:"
msgstr "Mapper u&tenfor prosjektet:"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 546
#: rc.cpp:2967
#, no-c-format
msgid "&Prefixes"
msgstr "&Prefikser"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 566
#: buildtools/custommakefiles/selectnewfilesdialog.cpp:28 rc.cpp:2973
#, no-c-format
msgid "Path"
msgstr "Sti"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 594
#: rc.cpp:2976
#, no-c-format
msgid "C&ustom prefixes:"
msgstr "T&ilpass prefikser:"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 678
#: rc.cpp:2988
#, no-c-format
msgid "&Build Order"
msgstr "&Byggerekkefølge"
#. i18n: file ./buildtools/autotools/subprojectoptionsdlgbase.ui line 775
#: rc.cpp:2997
#, no-c-format
msgid "O&rder in which sub projects are built:"
msgstr "Bygge&rekkefølge for underprosjektene:"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 16
#: buildtools/autotools/autoprojectpart.cpp:232 rc.cpp:3006
#, no-c-format
msgid "Configure Options"
msgstr "Oppsettsvalg"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 46
#: rc.cpp:3009
#, fuzzy, no-c-format
msgid "&Configuration:"
msgstr "Oppsett:"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 68
#: rc.cpp:3012
#, fuzzy, no-c-format
msgid "Different build profiles"
msgstr "Forskjell mot fil på disk"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 71
#: rc.cpp:3015
#, fuzzy, no-c-format
msgid "profiles"
msgstr "Åpne filer"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 152
#: rc.cpp:3027 rc.cpp:3030
#, no-c-format
msgid "Options to pass to configure, e.g. --prefix=<install dir>"
msgstr ""
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 163
#: rc.cpp:3033
#, no-c-format
msgid "&Build directory (must be different for every different configuration):"
msgstr "&Byggemappe (må være forskjellig for hvert forskjellige Oppsett):"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 191
#: rc.cpp:3036
#, fuzzy, no-c-format
msgid "Top source &directory:"
msgstr "&Toppmappe for kildekode:"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 214
#: rc.cpp:3039 rc.cpp:3054
#, no-c-format
msgid ""
"The build process will place the object\n"
"files and binary in this directory. \n"
"\n"
"If the name does not have a leading /\n"
"then it is relative to the project directory.\n"
"(in the General page)\n"
"\n"
"The build process also checks here for \n"
"a Makefile and a configure script.\n"
"\n"
"If you have imported a project and you were \n"
"building in the project directory, you \n"
"probably want this to be blank."
msgstr ""
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 297
#: rc.cpp:3075 rc.cpp:3081
#, no-c-format
msgid ""
"Where to start looking for the src files.\n"
"If the name does not have a leading /\n"
"then it is relative to the project directory.\n"
"(in the General page)"
msgstr ""
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 335
#: rc.cpp:3090 rc.cpp:3094 rc.cpp:3098
#, no-c-format
msgid ""
"Linker flags, e.g. -L<lib dir> if you have libraries in a\n"
"nonstandard directory <lib dir>"
msgstr ""
"Lenkerflagg, dvs. -L<lib dir> hvis du har biblioteker i\n"
"en ikke-standard mappe <lib dir>"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 374
#: rc.cpp:3102 rc.cpp:3106 rc.cpp:3113
#, no-c-format
msgid ""
"C/C++ preprocessor flags, e.g. -I<include dir> if you have\n"
"headers in a nonstandard directory <include dir>"
msgstr ""
"Preprosessorflagg for C/C++, f.eks. -I<include dir> hvis du har \n"
"deklarasjonsfiler i en ikke-standard mappe <include dir>"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 403
#: rc.cpp:3110
#, no-c-format
msgid "C/C++ &preprocessor flags (CPPFLAGS):"
msgstr "&Preprosessor-flagg for C/C++ (CPPFLAGS):"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 418
#: rc.cpp:3117
#, no-c-format
msgid "Configure argu&ments:"
msgstr "Oppsettsargu&menter:"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 452
#: rc.cpp:3123
#, no-c-format
msgid "C"
msgstr "C"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 463
#: rc.cpp:3126
#, no-c-format
msgid "C com&piler:"
msgstr "C-kom&pilator:"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 496
#: rc.cpp:3129
#, no-c-format
msgid "Compiler f&lags (CFLAGS):"
msgstr "Kompilatorf&lagg (CFLAGS):"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 551
#: rc.cpp:3135
#, no-c-format
msgid "Compiler co&mmand (CC):"
msgstr "Kompilatorko&mmando (CC):"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 586
#: rc.cpp:3138
#, no-c-format
msgid "C++"
msgstr "C++"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 597
#: rc.cpp:3141
#, no-c-format
msgid "C++ com&piler:"
msgstr "C++-kompilator:"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 630
#: rc.cpp:3144
#, no-c-format
msgid "Compiler co&mmand (CXX):"
msgstr "Kompilatorko&mmando (CXX):"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 663
#: rc.cpp:3147
#, fuzzy, no-c-format
msgid "Compiler flags (C&XXFLAGS):"
msgstr "Kompilatorf&lagg (CXXFLAGS):"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 720
#: rc.cpp:3153
#, fuzzy, no-c-format
msgid "F&ortran"
msgstr "Fortran"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 731
#: rc.cpp:3156
#, fuzzy, no-c-format
msgid "Fortra&n compiler:"
msgstr "Fortran-kompilator:"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 764
#: rc.cpp:3159
#, no-c-format
msgid "Compiler co&mmand (F77):"
msgstr "Kompilatorko&mmando (F77):"
#. i18n: file ./buildtools/autotools/configureoptionswidgetbase.ui line 797
#: rc.cpp:3162
#, no-c-format
msgid "Compiler f&lags (FFLAGS):"
msgstr "Kompilatorf&lagg (FFLAGS):"
#. i18n: file ./buildtools/ant/antoptionswidget.ui line 22
#: rc.cpp:3168
#, no-c-format
msgid "Quiet"
msgstr "Stille"
#. i18n: file ./buildtools/ant/antoptionswidget.ui line 27
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:38 rc.cpp:3171
#, no-c-format
msgid "Verbose"
msgstr "Pratsomt"
#. i18n: file ./buildtools/ant/antoptionswidget.ui line 32
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:356
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:410 rc.cpp:3174
#: rc.cpp:3385
#, no-c-format
msgid "Debug"
msgstr "Avlus"
#. i18n: file ./buildtools/ant/antoptionswidget.ui line 78
#: rc.cpp:3177
#, no-c-format
msgid "&Build file:"
msgstr "&Byggefil:"
#. i18n: file ./buildtools/ant/antoptionswidget.ui line 89
#: rc.cpp:3180
#, no-c-format
msgid "&Verbosity:"
msgstr "&Pratsomhet:"
#. i18n: file ./buildtools/ant/classpathwidget.ui line 24
#: rc.cpp:3192
#, no-c-format
msgid "Class&path"
msgstr "Klasse&sti"
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 16
#: rc.cpp:3195
#, fuzzy, no-c-format
msgid "QMake Manager Options"
msgstr "QMake-håndtering"
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 29
#: rc.cpp:3198
#, no-c-format
msgid ""
"- Also look into C++/Qt to define the QMake, Qt and Designer paths.\n"
"- Environment variables that should be resolved during parsing can be set on "
"the Make Options page.\n"
"- For changes on this page to take effect the project needs to be reloaded."
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 45
#: rc.cpp:3203
#, fuzzy, no-c-format
msgid "QMake Project File:"
msgstr "&Prosjektfiler:"
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 57
#: rc.cpp:3206
#, no-c-format
msgid ""
"This is the top level qmake project file, from which the project manager will "
"be populated.\n"
"Leave this empty to automatically search for a .pro file in the project "
"directory."
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 70
#: rc.cpp:3210
#, no-c-format
msgid "Behaviour on Subproject Change"
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 81
#: rc.cpp:3213
#, no-c-format
msgid ""
"The following settings determine what the project configuration dialog should "
"do when another subproject is selected while the dialog is still open."
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 92
#: rc.cpp:3216
#, fuzzy, no-c-format
msgid "&Always Save"
msgstr "&Alltid"
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 95
#: rc.cpp:3219
#, no-c-format
msgid "Always save the configuration when changing the project."
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 98
#: rc.cpp:3222
#, no-c-format
msgid ""
"Always save the project configuration when selecting a another sub project."
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 106
#: rc.cpp:3225
#, no-c-format
msgid "&Never Save (Warning: This can lead to loss of setting changes)"
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 109
#: rc.cpp:3228
#, no-c-format
msgid "Never save the configuration when changing the project."
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 112
#: rc.cpp:3231
#, no-c-format
msgid ""
"Never save the project configuration when selecting a another sub project."
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 120
#: rc.cpp:3234
#, no-c-format
msgid "As&k"
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 126
#: rc.cpp:3237
#, no-c-format
msgid ""
"Ask whether the configuration should be saved when switching the project."
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 129
#: rc.cpp:3240
#, no-c-format
msgid ""
"Always ask whether the configuration should be saved when selecting another "
"subproject."
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 147
#: rc.cpp:3243
#, no-c-format
msgid "Repla&ce File Paths with matching Variables when adding files"
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 153
#: rc.cpp:3246
#, no-c-format
msgid ""
"This replaces the relative paths of added files with existing custom variables "
"if the value assigned to it is the same as the path."
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 161
#: rc.cpp:3249
#, no-c-format
msgid "Show variables in filenames in the QMake projectmanager view."
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 169
#: rc.cpp:3252
#, no-c-format
msgid ""
"Display only filenames in the QMake Manager (Project reload is needed after "
"changing this setting)"
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 178
#: rc.cpp:3255
#, no-c-format
msgid ""
"Do not use the QMake Default Options\n"
"This disables the reading of any .qmake.cache files or mkspecs."
msgstr ""
#. i18n: file ./buildtools/qmake/qmakeoptionswidgetbase.ui line 186
#: rc.cpp:3259
#, no-c-format
msgid "Show parse error in message box"
msgstr ""
#. i18n: file ./buildtools/qmake/newwidgetdlgbase.ui line 24
#: rc.cpp:3262
#, no-c-format
msgid "New Widget"
msgstr "Nytt skjermelement"
#. i18n: file ./buildtools/qmake/newwidgetdlgbase.ui line 43
#: rc.cpp:3268
#, no-c-format
msgid "Widget Properties"
msgstr "Egenskaper for skjermelement"
#. i18n: file ./buildtools/qmake/newwidgetdlgbase.ui line 54
#: rc.cpp:3271
#, no-c-format
msgid "Subclassing"
msgstr "Under-klasse"
#. i18n: file ./buildtools/qmake/newwidgetdlgbase.ui line 73
#: rc.cpp:3274
#, no-c-format
msgid "Caption:"
msgstr "Tekst:"
#. i18n: file ./buildtools/qmake/newwidgetdlgbase.ui line 86
#: rc.cpp:3277
#, no-c-format
msgid "Subclass name:"
msgstr "Under-klassenavn:"
#. i18n: file ./buildtools/qmake/newwidgetdlgbase.ui line 143
#: kdevdesigner/designer/iconvieweditorimpl.cpp:63
#: kdevdesigner/designer/listboxeditorimpl.cpp:89
#: kdevdesigner/designer/widgetfactory.cpp:740
#: kdevdesigner/designer/widgetfactory.cpp:767
#: kdevdesigner/designer/widgetfactory.cpp:776 rc.cpp:3283 rc.cpp:8224
#, no-c-format
msgid "New Item"
msgstr "Nytt element"
#. i18n: file ./buildtools/qmake/disablesubprojectdlgbase.ui line 16
#: rc.cpp:3289
#, fuzzy, no-c-format
msgid "Select Subprojects to disable"
msgstr "Velg underprosjekt"
#. i18n: file ./buildtools/qmake/disablesubprojectdlgbase.ui line 25
#: rc.cpp:3292 rc.cpp:3757
#, no-c-format
msgid "Subprojects"
msgstr "Underprosjekter"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 25
#: rc.cpp:3301
#, no-c-format
msgid "QMake Subproject Configuration"
msgstr "Oppsett av underprosjekt i QMake"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 90
#: kdevdesigner/designer/multilineeditorimpl.cpp:101 rc.cpp:3313
#, no-c-format
msgid "Basics"
msgstr "Grunnleggende"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 112
#: rc.cpp:3319
#, no-c-format
msgid "Librar&y"
msgstr "B&ibliotek"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 115
#: rc.cpp:3322
#, no-c-format
msgid "Create a library"
msgstr "Opprett et bibliotek"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 123
#: rc.cpp:3325
#, fuzzy, no-c-format
msgid "&Subdirectories"
msgstr "&Undermapper"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 126
#: rc.cpp:3328
#, no-c-format
msgid "This project holds subdirectories"
msgstr "Dette prosjektet inneholder undermapper"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 137
#: rc.cpp:3331
#, fuzzy, no-c-format
msgid "Ordered"
msgstr "Ordn&et"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 140
#: rc.cpp:3334
#, no-c-format
msgid "Build the subprojects in the order they are listed in the .pro file"
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 168
#: rc.cpp:3337
#, fuzzy, no-c-format
msgid "A&pplication"
msgstr "Program"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 171
#: rc.cpp:3340
#, no-c-format
msgid "Create an application"
msgstr "Opprett et program"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 181
#: rc.cpp:3343
#, no-c-format
msgid "Target"
msgstr "Mål"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 192
#: rc.cpp:3346
#, fuzzy, no-c-format
msgid "Path:"
msgstr "&Sti:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 203
#: rc.cpp:3349
#, fuzzy, no-c-format
msgid "Output file:"
msgstr "Ut&fil:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 226
#: rc.cpp:3352
#, no-c-format
msgid "Target Installation"
msgstr "Mål-installasjon"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 242
#: rc.cpp:3355
#, no-c-format
msgid "I&nstall"
msgstr "I&nstaller"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 250
#: rc.cpp:3358
#, fuzzy, no-c-format
msgid "Installation path:"
msgstr "&Installasjonssti:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 263
#: rc.cpp:3361
#, fuzzy, no-c-format
msgid "Makefile"
msgstr "&Byggefil"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 284
#: rc.cpp:3364
#, fuzzy, no-c-format
msgid "Arguments"
msgstr "Ar&gumenter"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 295
#: rc.cpp:3367
#, fuzzy, no-c-format
msgid "Run arguments:"
msgstr "Ar&gumenter:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 313
#: rc.cpp:3370
#, fuzzy, no-c-format
msgid "Debug Arguments:"
msgstr "Ar&gumenter:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 366
#: rc.cpp:3379
#, no-c-format
msgid "Build Mode"
msgstr "Byggemodus"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 372
#: rc.cpp:3382 rc.cpp:3394
#, no-c-format
msgid "Set project to be built in release mode"
msgstr "Angi at prosjektet skal bygges i utgivelsesmodus"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 394
#: rc.cpp:3388
#, no-c-format
msgid "Set project to be built in debug mode"
msgstr "Angi at prosjektet skal bygges i feilsøkingsmodus"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 402
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:355
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:409 rc.cpp:3391
#, no-c-format
msgid "Release"
msgstr "Utgivelse"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 416
#: rc.cpp:3397
#, fuzzy, no-c-format
msgid "Debug && Release"
msgstr "&Utgave"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 422
#: rc.cpp:3400
#, fuzzy, no-c-format
msgid "Set project to be built in debug_and_release mode"
msgstr "Angi at prosjektet skal bygges i utgivelsesmodus"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 440
#: rc.cpp:3403
#, fuzzy, no-c-format
msgid "Enable warnings"
msgstr "Slå på ad&varsler"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 443
#: rc.cpp:3406
#, no-c-format
msgid "Show compiler warnings"
msgstr "Vis kompileringsadvarsler"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 454
#: rc.cpp:3409
#, no-c-format
msgid "Build All"
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 457
#: rc.cpp:3412
#, no-c-format
msgid "Builds Debug and Release version if Debug&Release is configured"
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 469
#: rc.cpp:3415
#, no-c-format
msgid "Requirements"
msgstr "Systemkrav"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 480
#: rc.cpp:3418 rc.cpp:3481
#, fuzzy, no-c-format
msgid "OpenGL"
msgstr "Open&GL"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 483
#: rc.cpp:3421
#, no-c-format
msgid "Requires the OpenGL (or Mesa) headers/libraries"
msgstr "Krever deklarasjonsfiler/biblioteker for OpenGL (eller Mesa)"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 491
#: rc.cpp:3424
#, fuzzy, no-c-format
msgid "STL"
msgstr "&STL"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 499
#: parts/valgrind/valgrind_widget.cpp:96 rc.cpp:3427
#, no-c-format
msgid "Thread"
msgstr "Tråd"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 502
#: rc.cpp:3430
#, no-c-format
msgid "Requires support for multi-threaded application or library."
msgstr "Krever støtte for flertrådet program eller bibliotek."
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 510
#: rc.cpp:3433
#, fuzzy, no-c-format
msgid "Qt"
msgstr "&Qt"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 513
#: rc.cpp:3436
#, no-c-format
msgid "Requires the Qt header files/library"
msgstr "Krever deklarasjonsfiler/biblioteker for Qt"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 521
#: rc.cpp:3439
#, fuzzy, no-c-format
msgid "X11"
msgstr "X&11"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 524
#: rc.cpp:3442 rc.cpp:3532
#, no-c-format
msgid "Support required for X11 application or library"
msgstr "Krever støtte for X11-program eller bibliotek"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 532
#: rc.cpp:3445
#, no-c-format
msgid "Precompiled headers"
msgstr "Prekompilerte hoder"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 540
#: rc.cpp:3448
#, fuzzy, no-c-format
msgid "RTTI"
msgstr "RTT&I"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 548
#: rc.cpp:3451
#, fuzzy, no-c-format
msgid "Windows"
msgstr "Vindu"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 556
#: rc.cpp:3454
#, fuzzy, no-c-format
msgid "Custom Configuration"
msgstr "Oppsett:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 564
#: rc.cpp:3457
#, fuzzy, no-c-format
msgid "Exceptions "
msgstr "U&nntak"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 580
#: rc.cpp:3460
#, no-c-format
msgid "Console"
msgstr "Konsoll"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 586
#: rc.cpp:3463
#, no-c-format
msgid "Check to build a win32 console app"
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 599
#: rc.cpp:3466
#, fuzzy, no-c-format
msgid "Qt4 Libraries"
msgstr "Biblioteker"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 610
#: rc.cpp:3469
#, no-c-format
msgid "Gui"
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 621
#: parts/doxygen/messages.cpp:202 rc.cpp:3472
#, no-c-format
msgid "XML"
msgstr "XML"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 629
#: rc.cpp:3475
#, fuzzy, no-c-format
msgid "Network"
msgstr "Ny"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 637
#: src/profileengine/editor/profileeditor.cpp:137 rc.cpp:3478
#, no-c-format
msgid "Core"
msgstr "Kjerne"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 656
#: rc.cpp:3484
#, fuzzy, no-c-format
msgid "QtUiTools"
msgstr "Verktøy"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 664
#: languages/sql/sqlsupport_part.cpp:59 rc.cpp:3487
#, no-c-format
msgid "SQL"
msgstr "SQL"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 672
#: rc.cpp:3490
#, no-c-format
msgid "SVG"
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 680
#: rc.cpp:3493
#, fuzzy, no-c-format
msgid "QtTest"
msgstr "&Test"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 688
#: rc.cpp:3496
#, fuzzy, no-c-format
msgid "Qt3 Support"
msgstr "C++-støtte"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 696
#: rc.cpp:3499
#, no-c-format
msgid "QDBus (Qt4.2)"
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 704
#: rc.cpp:3502
#, fuzzy, no-c-format
msgid "QtAssistant"
msgstr "KDevelop-assistent"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 712
#: rc.cpp:3505
#, no-c-format
msgid "QtScript (Qt4.3)"
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 720
#: rc.cpp:3508
#, no-c-format
msgid "QtWebKit (Qt4.4)"
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 728
#: rc.cpp:3511
#, no-c-format
msgid "QtXmlPatterns (Qt4.4)"
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 736
#: rc.cpp:3514
#, no-c-format
msgid "Phonon (Qt4.4)"
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 744
#: rc.cpp:3517
#, no-c-format
msgid "QtHelp (Qt4.4)"
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 754
#: rc.cpp:3520
#, no-c-format
msgid "Library Options"
msgstr "Biblioteksinnstillinger"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 776
#: rc.cpp:3523
#, fuzzy, no-c-format
msgid "Build as static library"
msgstr "S&tatisk bibliotek"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 790
#: rc.cpp:3526 rc.cpp:7905
#, no-c-format
msgid "Plugin"
msgstr "Programtillegg"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 801
#: rc.cpp:3529
#, fuzzy, no-c-format
msgid "Make libtool archive"
msgstr "Lag libtool-ar&kiv"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 839
#: rc.cpp:3535
#, fuzzy, no-c-format
msgid "Build as shared library"
msgstr "D&elt bibliotek"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 850
#: rc.cpp:3538
#, fuzzy, no-c-format
msgid "Designer Plugin"
msgstr "Slå av tilleggsmodul"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 869
#: rc.cpp:3541
#, fuzzy, no-c-format
msgid "Library version:"
msgstr "Bibliotek&versjon:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 910
#: rc.cpp:3544
#, fuzzy, no-c-format
msgid "Includes"
msgstr "I&nkluderer"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 932
#: rc.cpp:3547 rc.cpp:3568 rc.cpp:3589 rc.cpp:3607 rc.cpp:3616 rc.cpp:3628
#: rc.cpp:3646 rc.cpp:3655 rc.cpp:3718
#, fuzzy, no-c-format
msgid "Move Up"
msgstr "Flytt &opp"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 940
#: rc.cpp:3550 rc.cpp:3571 rc.cpp:3592 rc.cpp:3610 rc.cpp:3619 rc.cpp:3631
#: rc.cpp:3649 rc.cpp:3658 rc.cpp:3721
#, fuzzy, no-c-format
msgid "Move Down"
msgstr "Flytt &ned"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 965
#: rc.cpp:3553
#, no-c-format
msgid "Directories Outside Project"
msgstr "Mapper utenfor prosjektet"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 984
#: rc.cpp:3556
#, no-c-format
msgid "Directories Inside Project"
msgstr "Mapper inne i prosjektet"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1013
#: rc.cpp:3559 rc.cpp:3580 rc.cpp:3598 rc.cpp:3637
#, fuzzy, no-c-format
msgid "Add..."
msgstr "&Legg til …"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1074
#: rc.cpp:3574
#, no-c-format
msgid "Libraries"
msgstr "Biblioteker"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1091
#: rc.cpp:3577
#, fuzzy, no-c-format
msgid "External Library Dirs"
msgstr "Eksterne biblioteker"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1187
#: rc.cpp:3595
#, no-c-format
msgid "External Libraries"
msgstr "Eksterne biblioteker"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1283
#: rc.cpp:3613
#, no-c-format
msgid "Link Convenience Libraries Inside Project"
msgstr "Lenk inn 'lettvinthets-biblioteker' inne i prosjektet"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1351
#: rc.cpp:3622
#, fuzzy, no-c-format
msgid "Dependencies"
msgstr "&Avhengigheter"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1368
#: rc.cpp:3625
#, no-c-format
msgid "Targets in Project"
msgstr "Mål i prosjektet"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1443
#: rc.cpp:3634
#, no-c-format
msgid "Miscellaneous Targets"
msgstr "Diverse mål"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1539
#: rc.cpp:3652
#, no-c-format
msgid "Order in Which Sub Projects Are Built"
msgstr "Byggerekkefølge for underprosjektene"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1610
#: buildtools/custommakefiles/customprojectpart.cpp:203 rc.cpp:3661
#, no-c-format
msgid "Build Options"
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1629
#: rc.cpp:3664
#, no-c-format
msgid "Compiler Options"
msgstr "Innstilling for kompilator"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1656
#: rc.cpp:3667
#, fuzzy, no-c-format
msgid "Debug flags:"
msgstr "&Feilsøkingsflagg:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1667
#: rc.cpp:3670
#, fuzzy, no-c-format
msgid "Release flags:"
msgstr "&Utgaveflagg:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1678
#: rc.cpp:3673
#, no-c-format
msgid "Defines:"
msgstr "Definisjoner:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1717
#: rc.cpp:3676
#, no-c-format
msgid "Intermediate File Directories"
msgstr "Mapper for mellomfiler"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1736
#: rc.cpp:3679
#, fuzzy, no-c-format
msgid "MOC files:"
msgstr "&MOC-filer:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1747
#: rc.cpp:3682
#, fuzzy, no-c-format
msgid "UI files:"
msgstr "&UI-filer:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1758
#: rc.cpp:3685
#, fuzzy, no-c-format
msgid "Object files:"
msgstr "Ob&jektfiler:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1772
#: rc.cpp:3688
#, fuzzy, no-c-format
msgid "RCC files:"
msgstr "&MOC-filer:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1817
#: rc.cpp:3691
#, no-c-format
msgid "Corba"
msgstr "Corba"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1831
#: rc.cpp:3694
#, fuzzy, no-c-format
msgid "Compiler options:"
msgstr "Kompilator&flagg:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1852
#: rc.cpp:3697
#, fuzzy, no-c-format
msgid "IDL compiler:"
msgstr "&IDL-kompilator:"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1884
#: rc.cpp:3700
#, fuzzy, no-c-format
msgid "Custom Variables"
msgstr "Tilpassede &variabler"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1912
#: rc.cpp:3706 rc.cpp:3727
#, fuzzy, no-c-format
msgid "Operator"
msgstr "Operasjoner"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 1974
#: kdevdesigner/designer/mainwindowactions.cpp:629
#: kdevdesigner/designer/mainwindowactions.cpp:644 rc.cpp:3712
#, no-c-format
msgid "New"
msgstr "Ny"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 2082
#: rc.cpp:3730
#, fuzzy, no-c-format
msgid "+="
msgstr "+"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 2087
#: rc.cpp:3733
#, fuzzy, no-c-format
msgid "-="
msgstr "-"
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 2092
#: rc.cpp:3736
#, no-c-format
msgid "="
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 2097
#: rc.cpp:3739
#, no-c-format
msgid "*="
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 2102
#: rc.cpp:3742
#, no-c-format
msgid "~="
msgstr ""
#. i18n: file ./buildtools/qmake/projectconfigurationdlgbase.ui line 2163
#: rc.cpp:3745
#, no-c-format
msgid "Value:"
msgstr "Verdi:"
#. i18n: file ./buildtools/qmake/choosesubprojectdlgbase.ui line 16
#: rc.cpp:3748
#, no-c-format
msgid "Select Subproject"
msgstr "Velg underprosjekt"
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 16
#: rc.cpp:3760
#, no-c-format
msgid "Create Scope"
msgstr "Opprett virkefelt"
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 35
#: rc.cpp:3763
#, fuzzy, no-c-format
msgid "Scopetype:"
msgstr "Velg egenskapstype"
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 41
#: rc.cpp:3766
#, no-c-format
msgid "Simple Scope"
msgstr ""
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 46
#: rc.cpp:3769
#, fuzzy, no-c-format
msgid "Function Scope"
msgstr "Funksjon"
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 51
#: rc.cpp:3772
#, fuzzy, no-c-format
msgid "Include File"
msgstr "Gå til Include-fil: %1"
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 58
#: rc.cpp:3775
#, no-c-format
msgid "Choose between the different types of new scopes"
msgstr ""
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 85
#: buildtools/qmake/trollprojectwidget.cpp:1061 rc.cpp:3778
#, fuzzy, no-c-format
msgid "Scope Settings"
msgstr "Snuttinnstillinger"
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 111
#: rc.cpp:3781
#, no-c-format
msgid "Specify the new scope name"
msgstr ""
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 119
#: rc.cpp:3784
#, fuzzy, no-c-format
msgid "Scopename:"
msgstr "Typenavn:"
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 148
#: rc.cpp:3787
#, fuzzy, no-c-format
msgid "Function:"
msgstr "F&unksjon:"
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 154
#: rc.cpp:3790
#, fuzzy, no-c-format
msgid "Specify the function name"
msgstr "Endre funksjonsnavn"
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 162
#: rc.cpp:3793
#, fuzzy, no-c-format
msgid "Arguments:"
msgstr "Ar&gumenter:"
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 168
#: rc.cpp:3796
#, no-c-format
msgid "Specify the list of function arguments, delimited by a comma"
msgstr ""
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 197
#: rc.cpp:3799
#, no-c-format
msgid "*.pri"
msgstr ""
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 203
#: rc.cpp:3802
#, fuzzy, no-c-format
msgid "Choose the .pri file to include"
msgstr "Velg en core-fil å undersøke …"
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 211
#: rc.cpp:3805
#, fuzzy, no-c-format
msgid "Include File:"
msgstr "Gå til Include-fil: %1"
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 222
#: rc.cpp:3808
#, no-c-format
msgid "&use !include instead of include"
msgstr ""
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 225
#: rc.cpp:3811
#, no-c-format
msgid "Use !include instead of include for the function scope"
msgstr ""
#. i18n: file ./buildtools/qmake/createscopedlgbase.ui line 277
#: rc.cpp:3817 rc.cpp:8245
#, no-c-format
msgid "Ca&ncel"
msgstr ""
#. i18n: file ./buildtools/ada/adaproject_optionsdlgbase.ui line 19
#: buildtools/ada/adaproject_part.cpp:375
#: buildtools/ada/adaproject_part.cpp:406 rc.cpp:3820
#, no-c-format
msgid "Ada Compiler"
msgstr "Ada-kompilator"
#. i18n: file ./buildtools/ada/adaproject_optionsdlgbase.ui line 64
#: rc.cpp:3823
#, no-c-format
msgid "Configuration:"
msgstr "Oppsett:"
#. i18n: file ./buildtools/ada/adaproject_optionsdlgbase.ui line 170
#: rc.cpp:3835
#, no-c-format
msgid "Compiler &options:"
msgstr "Kompilator&flagg:"
#. i18n: file ./buildtools/ada/adaproject_optionsdlgbase.ui line 189
#: rc.cpp:3838
#, no-c-format
msgid "Ada &compiler:"
msgstr "Ada &kompilator:"
#. i18n: file ./buildtools/ada/adaproject_optionsdlgbase.ui line 223
#: rc.cpp:3841 rc.cpp:3989
#, no-c-format
msgid "Compiler co&mmand:"
msgstr "Kompilatorko&mmando:"
#. i18n: file ./buildtools/ada/adaproject_optionsdlgbase.ui line 304
#: rc.cpp:3844 rc.cpp:3995
#, no-c-format
msgid "Main &source file:"
msgstr "Ho&vedkildefil:"
#. i18n: file ./buildtools/ada/adaproject_optionsdlgbase.ui line 349
#: rc.cpp:3847
#, no-c-format
msgid "Load Default Compiler Options"
msgstr "Last inn standard kompilatorinnstillinger"
#. i18n: file ./buildtools/custommakefiles/custommakeconfigwidgetbase.ui line 27
#: rc.cpp:3853
#, no-c-format
msgid "A&bort on first error"
msgstr "Av&bryt ved første feil"
#. i18n: file ./buildtools/custommakefiles/custommakeconfigwidgetbase.ui line 35
#: rc.cpp:3856
#, no-c-format
msgid "Only di&splay commands without actually executing them"
msgstr "Bare vi&s kommandoer uten virkelig å kjøre dem"
#. i18n: file ./buildtools/custommakefiles/custommakeconfigwidgetbase.ui line 61
#: rc.cpp:3859
#, no-c-format
msgid "A&dditional make options:"
msgstr "F&lere make-valg:"
#. i18n: file ./buildtools/custommakefiles/custommakeconfigwidgetbase.ui line 77
#: rc.cpp:3862
#, no-c-format
msgid "Name of make e&xecutable:"
msgstr "Na&vn på make-programmet:"
#. i18n: file ./buildtools/custommakefiles/custommakeconfigwidgetbase.ui line 88
#: rc.cpp:3865
#, no-c-format
msgid "Default make &target:"
msgstr "Standard make-&mål:"
#. i18n: file ./buildtools/custommakefiles/custommakeconfigwidgetbase.ui line 109
#: rc.cpp:3868
#, no-c-format
msgid "Run multiple jobs"
msgstr ""
#. i18n: file ./buildtools/custommakefiles/custommakeconfigwidgetbase.ui line 120
#: rc.cpp:3871
#, no-c-format
msgid "Number of simultaneous &jobs:"
msgstr "Antall samtidige &jobber:"
#. i18n: file ./buildtools/custommakefiles/custommakeconfigwidgetbase.ui line 180
#: rc.cpp:3874
#, no-c-format
msgid "Make &priority:"
msgstr "Make-&prioritet:"
#. i18n: file ./buildtools/custommakefiles/custommakeconfigwidgetbase.ui line 248
#: rc.cpp:3877 rc.cpp:3907
#, no-c-format
msgid "E&nvironment:"
msgstr "Mi&ljøvariabler:"
#. i18n: file ./buildtools/custommakefiles/custommakeconfigwidgetbase.ui line 286
#: rc.cpp:3883
#, no-c-format
msgid "Co&py"
msgstr "Ko&pier"
#. i18n: file ./buildtools/custommakefiles/custommakeconfigwidgetbase.ui line 297
#: rc.cpp:3886 rc.cpp:3916
#, no-c-format
msgid "Re&move"
msgstr "Fjer&n"
#. i18n: file ./buildtools/custommakefiles/customotherconfigwidgetbase.ui line 45
#: rc.cpp:3895
#, fuzzy, no-c-format
msgid "Add&itional options:"
msgstr "Flere valg"
#. i18n: file ./buildtools/custommakefiles/customotherconfigwidgetbase.ui line 61
#: rc.cpp:3898
#, no-c-format
msgid "Name of build &script"
msgstr ""
#. i18n: file ./buildtools/custommakefiles/customotherconfigwidgetbase.ui line 72
#: rc.cpp:3901
#, fuzzy, no-c-format
msgid "Default &target:"
msgstr "Standard make-&mål:"
#. i18n: file ./buildtools/custommakefiles/customotherconfigwidgetbase.ui line 93
#: rc.cpp:3904
#, fuzzy, no-c-format
msgid "Run with priority:"
msgstr "Synkroniser med lager"
#. i18n: file ./buildtools/custommakefiles/custommanagerwidgetbase.ui line 16
#: rc.cpp:3922
#, fuzzy, no-c-format
msgid "Custom Manager Options"
msgstr "Tilpassede valg"
#. i18n: file ./buildtools/custommakefiles/custommanagerwidgetbase.ui line 35
#: rc.cpp:3925
#, fuzzy, no-c-format
msgid "Filetypes used in Project"
msgstr "Målfiler i prosjektet"
#. i18n: file ./buildtools/custommakefiles/custommanagerwidgetbase.ui line 41
#: rc.cpp:3928
#, no-c-format
msgid ""
"Add filetypes to be used in Projects, can be full filenames or shell wildcards"
msgstr ""
#. i18n: file ./buildtools/custommakefiles/custommanagerwidgetbase.ui line 45
#: rc.cpp:3931
#, no-c-format
msgid ""
"Each entry contains a filetype used in the project in the form of a filename or "
"a filename wildcard (using shell wildcards). \n"
"This will be used when adding/removing files in directories and re-populating "
"the project"
msgstr ""
#. i18n: file ./buildtools/custommakefiles/selectnewfilesdialogbase.ui line 24
#: rc.cpp:3935
#, fuzzy, no-c-format
msgid "Files to add to the Project:"
msgstr "Tilleggsmoduler som skal lastes inn for dette prosjektet"
#. i18n: file ./buildtools/custommakefiles/selectnewfilesdialogbase.ui line 38
#: rc.cpp:3938
#, fuzzy, no-c-format
msgid "Select the files to add to the project"
msgstr "CVS nye filer lagt til i prosjektet"
#. i18n: file ./buildtools/custommakefiles/selectnewfilesdialogbase.ui line 41
#: rc.cpp:3941
#, no-c-format
msgid ""
"Select the files and directories that should be added to the list of project "
"files. All other files and directories will be put into the blacklist."
msgstr ""
#. i18n: file ./buildtools/custommakefiles/custombuildoptionswidgetbase.ui line 16
#: rc.cpp:3944
#, no-c-format
msgid "Custom Build Options"
msgstr "Selvvalgte byggevalg"
#. i18n: file ./buildtools/custommakefiles/custombuildoptionswidgetbase.ui line 27
#: rc.cpp:3947
#, no-c-format
msgid "Build Tool"
msgstr "Byggeverktøy"
#. i18n: file ./buildtools/custommakefiles/custombuildoptionswidgetbase.ui line 38
#: rc.cpp:3950
#, no-c-format
msgid "&Make"
msgstr "&Make"
#. i18n: file ./buildtools/custommakefiles/custombuildoptionswidgetbase.ui line 49
#: rc.cpp:3953
#, fuzzy, no-c-format
msgid "A&nt"
msgstr "&Ant"
#. i18n: file ./buildtools/custommakefiles/custombuildoptionswidgetbase.ui line 57
#: rc.cpp:3956
#, fuzzy, no-c-format
msgid "Other"
msgstr "&Andre"
#. i18n: file ./buildtools/custommakefiles/custombuildoptionswidgetbase.ui line 63
#: rc.cpp:3959
#, no-c-format
msgid "other custom build tool, e.g. script"
msgstr ""
#. i18n: file ./buildtools/custommakefiles/custombuildoptionswidgetbase.ui line 66
#: rc.cpp:3962
#, no-c-format
msgid ""
"There are myriads of buildtools out there that are not ant or make. If you use "
"one of them (or have your own scripts), select this option."
msgstr ""
#. i18n: file ./buildtools/custommakefiles/custombuildoptionswidgetbase.ui line 93
#: rc.cpp:3965
#, fuzzy, no-c-format
msgid "Run &the build tool in the following directory:"
msgstr "Kjør byggeverktøyet i &denne mappa:"
#. i18n: file ./buildtools/pascal/pascalproject_optionsdlgbase.ui line 19
#: buildtools/pascal/pascalproject_part.cpp:398
#: buildtools/pascal/pascalproject_part.cpp:434 rc.cpp:3968
#, no-c-format
msgid "Pascal Compiler"
msgstr "Pascal-kompilator"
#. i18n: file ./buildtools/pascal/pascalproject_optionsdlgbase.ui line 46
#: rc.cpp:3971
#, no-c-format
msgid "Con&figuration:"
msgstr "Opp&sett:"
#. i18n: file ./buildtools/pascal/pascalproject_optionsdlgbase.ui line 155
#: rc.cpp:3983
#, no-c-format
msgid "Compiler op&tions:"
msgstr "Kompila&torflagg:"
#. i18n: file ./buildtools/pascal/pascalproject_optionsdlgbase.ui line 174
#: rc.cpp:3986
#, no-c-format
msgid "&Pascal compiler:"
msgstr "&Pascal-kompilator:"
#. i18n: file ./buildtools/pascal/pascalproject_optionsdlgbase.ui line 301
#: rc.cpp:3992
#, no-c-format
msgid "Load &Default Compiler Options"
msgstr "Last inn stan&dard kompileringsvalg"
#. i18n: file ./kdevdesigner/designer/variabledialog.ui line 41
#: kdevdesigner/designer/hierarchyview.cpp:1201
#: kdevdesigner/designer/variabledialogimpl.cpp:103
#: kdevdesigner/designer/variabledialogimpl.cpp:122 rc.cpp:3998
#, no-c-format
msgid "Edit Variables"
msgstr "Rediger variabler"
#. i18n: file ./kdevdesigner/designer/variabledialog.ui line 67
#: rc.cpp:4004 rc.cpp:4459 rc.cpp:5225 rc.cpp:6652 rc.cpp:6703 rc.cpp:6760
#: rc.cpp:8161
#, no-c-format
msgid "Access"
msgstr "Tilgang"
#. i18n: file ./kdevdesigner/designer/variabledialog.ui line 105
#: rc.cpp:4010
#, no-c-format
msgid "Variable Properties"
msgstr "Variabelegenskaper"
#. i18n: file ./kdevdesigner/designer/variabledialog.ui line 122
#: rc.cpp:4013
#, no-c-format
msgid "Acc&ess:"
msgstr "Tilga&ng:"
#. i18n: file ./kdevdesigner/designer/variabledialog.ui line 133
#: rc.cpp:4016
#, no-c-format
msgid "&Variable:"
msgstr "&Variabler:"
#. i18n: file ./kdevdesigner/designer/variabledialog.ui line 147
#: kdevdesigner/designer/hierarchyview.cpp:762
#: kdevdesigner/designer/hierarchyview.cpp:843
#: kdevdesigner/designer/hierarchyview.cpp:852 rc.cpp:4019 rc.cpp:4477
#: rc.cpp:5310
#, no-c-format
msgid "public"
msgstr "public"
#. i18n: file ./kdevdesigner/designer/variabledialog.ui line 152
#: kdevdesigner/designer/customwidgeteditorimpl.cpp:560
#: kdevdesigner/designer/hierarchyview.cpp:760
#: kdevdesigner/designer/hierarchyview.cpp:841
#: kdevdesigner/designer/hierarchyview.cpp:850 rc.cpp:4022 rc.cpp:4480
#: rc.cpp:5313
#, no-c-format
msgid "protected"
msgstr "protected"
#. i18n: file ./kdevdesigner/designer/variabledialog.ui line 157
#: kdevdesigner/designer/hierarchyview.cpp:758
#: kdevdesigner/designer/hierarchyview.cpp:839
#: kdevdesigner/designer/hierarchyview.cpp:848 rc.cpp:4025 rc.cpp:5316
#, no-c-format
msgid "private"
msgstr "privat"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 41
#: rc.cpp:4037
#, no-c-format
msgid "Font Properties"
msgstr "Skriftegenskaper"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 73
#: kdevdesigner/designer/propertyeditor.cpp:1278 rc.cpp:4040
#, no-c-format
msgid "default"
msgstr "standard"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 85
#: rc.cpp:4043
#, no-c-format
msgid "&Font:"
msgstr "Skri&fttype:"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 96
#: rc.cpp:4046
#, no-c-format
msgid "Rel. &size:"
msgstr "Rel. &str:"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 124
#: rc.cpp:4049
#, no-c-format
msgid "C&olor:"
msgstr "F&arge:"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 133
#: rc.cpp:4052
#, no-c-format
msgid "0"
msgstr "0"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 138
#: rc.cpp:4055
#, no-c-format
msgid "-4"
msgstr "-4"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 143
#: rc.cpp:4058
#, no-c-format
msgid "-3"
msgstr "-3"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 148
#: rc.cpp:4061
#, no-c-format
msgid "-2"
msgstr "-2"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 153
#: rc.cpp:4064
#, no-c-format
msgid "-1"
msgstr "-1"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 158
#: rc.cpp:4067
#, no-c-format
msgid "+1"
msgstr "+1"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 163
#: rc.cpp:4070
#, no-c-format
msgid "+2"
msgstr "+2"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 168
#: rc.cpp:4073
#, no-c-format
msgid "+3"
msgstr "+3"
#. i18n: file ./kdevdesigner/designer/richtextfontdialog.ui line 173
#: rc.cpp:4076
#, no-c-format
msgid "+4"
msgstr "+4"
#. i18n: file ./kdevdesigner/designer/about.ui line 41
#: rc.cpp:4085
#, no-c-format
msgid "Qt Designer"
msgstr "Qt Designer"
#. i18n: file ./kdevdesigner/designer/about.ui line 80
#: rc.cpp:4088
#, no-c-format
msgid "Version 3.2"
msgstr "Versjon 3.2"
#. i18n: file ./kdevdesigner/designer/about.ui line 93
#: rc.cpp:4091
#, no-c-format
msgid "Copyright (C) 2000-2003 Trolltech AS. All Rights Reserved."
msgstr "Copyright (C) 2000-2003 Trolltech AS. All Rights Reserved."
#. i18n: file ./kdevdesigner/designer/about.ui line 114
#: rc.cpp:4094
#, no-c-format
msgid ""
"<p>Qt Commercial Edition license holders: This program is licensed to you under "
"the terms of the Qt Commercial License Agreement. For details, see the file "
"LICENSE that came with this software distribution.</p>"
"<p></p>"
"<p>Qt Free Edition users: This program is licensed to you under the terms of "
"the GNU General Public License Version 2. For details, see the file LICENSE.GPL "
"that came with this software distribution.</p>"
"<p>The program is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE "
"WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.</p>"
msgstr ""
"<p>For de som har kommersiell lisens: Dette programmet er lisensiert til deg "
"med betingelsene i Qt kommersielle lisensavtale. Detaljer finner du i fila "
"LICENSE som ble levert med denne programvaren.</p> "
"<p></p> For de som bruker Qt Free Edition: Dette programmet er lisensiert til "
"deg med betingelsene i GNU General Public License Version 2. Detaljer finner du "
"i fila LICENSE.GPL som ble levert med denne programvaren.</p> "
"<p>Programmet leveres I DEN STAND DET ER uten noen som helst garanti.</p>"
#. i18n: file ./kdevdesigner/designer/listeditor.ui line 56
#: kdevdesigner/designer/widgetfactory.cpp:775 rc.cpp:4103 rc.cpp:6977
#: rc.cpp:8221
#, no-c-format
msgid "Column 1"
msgstr "Kolonne 1"
#. i18n: file ./kdevdesigner/designer/listeditor.ui line 96
#: rc.cpp:4112
#, no-c-format
msgid "Re&name"
msgstr "Gi &nytt navn"
#. i18n: file ./kdevdesigner/designer/newform.ui line 41
#: buildtools/script/scriptnewfiledlg.cpp:36
#: kdevdesigner/designer/mainwindowactions.cpp:659 rc.cpp:4118
#, no-c-format
msgid "New File"
msgstr "Ny fil"
#. i18n: file ./kdevdesigner/designer/newform.ui line 47
#: rc.cpp:4121
#, no-c-format
msgid ""
"<b>New Form</b>"
"<p>Select a template for the new form and click the <b>OK</b>"
"-button to create it.</p>"
msgstr ""
"<b>Nytt skjema</b> "
"<p>Velg en mal for det nye skjemaer og trykk <b>OK</b>"
"-knappen for å opprette det.</p>"
#. i18n: file ./kdevdesigner/designer/newform.ui line 115
#: rc.cpp:4130
#, no-c-format
msgid "Create a new form using the selected template."
msgstr "Opprett et nytt skjema med den valgte malen."
#. i18n: file ./kdevdesigner/designer/newform.ui line 129
#: rc.cpp:4136
#, no-c-format
msgid "Close the dialog without creating a new form."
msgstr "Lukk dialogen uten å lage et nytt skjema."
#. i18n: file ./kdevdesigner/designer/newform.ui line 151
#: rc.cpp:4139
#, no-c-format
msgid "Displays a list of the available templates."
msgstr "Viser en liste over tilgjengelige maler."
#. i18n: file ./kdevdesigner/designer/newform.ui line 159
#: rc.cpp:4142
#, no-c-format
msgid "&Insert into:"
msgstr "Sett &inn i:"
#. i18n: file ./kdevdesigner/designer/pixmapfunction.ui line 41
#: rc.cpp:4145
#, no-c-format
msgid "Choose Pixmap"
msgstr "Velg pixmap"
#. i18n: file ./kdevdesigner/designer/pixmapfunction.ui line 61
#: rc.cpp:4148
#, no-c-format
msgid "&Enter arguments for loading the pixmap:"
msgstr "&Oppgi argumenter for pixmap-innlasting:"
#. i18n: file ./kdevdesigner/designer/pixmapfunction.ui line 349
#: rc.cpp:4151
#, no-c-format
msgid "QPixmap("
msgstr "QPixmap("
#. i18n: file ./kdevdesigner/designer/pixmapfunction.ui line 865
#: rc.cpp:4154
#, no-c-format
msgid ")"
msgstr ")"
#. i18n: file ./kdevdesigner/designer/createtemplate.ui line 41
#: kdevdesigner/designer/mainwindowactions.cpp:739
#: kdevdesigner/designer/mainwindowactions.cpp:1451
#: kdevdesigner/designer/mainwindowactions.cpp:1472 rc.cpp:4166
#, no-c-format
msgid "Create Template"
msgstr "Opprett mal"
#. i18n: file ./kdevdesigner/designer/createtemplate.ui line 72
#: rc.cpp:4172
#, no-c-format
msgid "Name of the new template"
msgstr "Navn på den nye malen"
#. i18n: file ./kdevdesigner/designer/createtemplate.ui line 75
#: rc.cpp:4175
#, no-c-format
msgid "Enter the name of the new template"
msgstr "Skriv inn navnet på den nye malen"
#. i18n: file ./kdevdesigner/designer/createtemplate.ui line 83
#: rc.cpp:4178
#, no-c-format
msgid "Class of the new template"
msgstr "Klasse for den nye malen"
#. i18n: file ./kdevdesigner/designer/createtemplate.ui line 86
#: rc.cpp:4181
#, no-c-format
msgid ""
"Enter the name of the class which should be used as the template's base class"
msgstr "Oppgi navnet på klassen som skal brukes som malens basisklasse"
#. i18n: file ./kdevdesigner/designer/createtemplate.ui line 125
#: rc.cpp:4184 rc.cpp:6778 rc.cpp:8182
#, no-c-format
msgid "C&reate"
msgstr "&Opprett"
#. i18n: file ./kdevdesigner/designer/createtemplate.ui line 131
#: rc.cpp:4187
#, no-c-format
msgid "Creates the new template"
msgstr "Lager den nye malen"
#. i18n: file ./kdevdesigner/designer/createtemplate.ui line 142
#: rc.cpp:4193
#, no-c-format
msgid "Closes the Dialog"
msgstr "Lukker dialogen"
#. i18n: file ./kdevdesigner/designer/createtemplate.ui line 152
#: rc.cpp:4196
#, no-c-format
msgid "&Baseclass for template:"
msgstr "&Basisklasse for malen:"
#. i18n: file ./kdevdesigner/designer/actioneditor.ui line 41
#: rc.cpp:4199
#, no-c-format
msgid "Edit Actions"
msgstr "Rediger handlinger"
#. i18n: file ./kdevdesigner/designer/actioneditor.ui line 83
#: rc.cpp:4202
#, no-c-format
msgid "Create new Action"
msgstr "Lag ny handling"
#. i18n: file ./kdevdesigner/designer/actioneditor.ui line 100
#: rc.cpp:4205
#, no-c-format
msgid "Delete current Action"
msgstr "Slett gjeldende handling"
#. i18n: file ./kdevdesigner/designer/actioneditor.ui line 117
#: rc.cpp:4208
#, no-c-format
msgid "Connect current Action"
msgstr "Koble til gjeldende handling"
#. i18n: file ./kdevdesigner/designer/connectiondialog.ui line 41
#: rc.cpp:4211
#, no-c-format
msgid "View & Edit Connections"
msgstr "Vis && rediger forbindelser"
#. i18n: file ./kdevdesigner/designer/connectiondialog.ui line 58
#: parts/filecreate/filecreate_part.cpp:81 rc.cpp:4214
#, no-c-format
msgid "&New"
msgstr "&Ny"
#. i18n: file ./kdevdesigner/designer/connectiondialog.ui line 74
#: rc.cpp:4217
#, no-c-format
msgid "&Connections:"
msgstr "&Forbindelser:"
#. i18n: file ./kdevdesigner/designer/connectiondialog.ui line 129
#: rc.cpp:4229
#, no-c-format
msgid "&Edit Slots..."
msgstr "R&ediger slots …"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 41
#: rc.cpp:4232
#, no-c-format
msgid "Edit Custom Widgets"
msgstr "Rediger selvvalgte skjermelementer"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 47
#: rc.cpp:4235
#, no-c-format
msgid ""
"<b>Edit Custom Widgets</b>"
"<p>Add or delete custom widgets from <i>Qt Designer</i>"
"'s database, and edit the properties of existing widgets.</p>"
msgstr ""
"<b>Rediger selvvalgte skjermelementer</b> "
"<p>Legg til eller fjern selvvalgte skjermelementer fra <i>Qt Designer</i>"
"s database, og rediger egenskaper for eksisterende elementer.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 64
#: rc.cpp:4238
#, no-c-format
msgid "The list of all custom widgets known to Qt Designer."
msgstr ""
"Lista over alle selvvalgte skjermelementer som Qt Designer kjenner til."
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 72
#: rc.cpp:4241
#, no-c-format
msgid "&New Widget"
msgstr "&Nytt skjermelement"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 75
#: rc.cpp:4244
#, no-c-format
msgid "Add new custom widget."
msgstr "Legg til nytt selvvalgt skjermelement."
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 78
#: rc.cpp:4247
#, no-c-format
msgid ""
"<b>Create an empty custom widget and add it to the list.</b>"
"<p>New custom widgets have a default name and header file, which must both be "
"changed to appropriate values.</p>"
msgstr ""
"<b>Lag et nytt tomt selvvalgt skjermelement og legg det til i lista.</b> "
"<p>Nye selvvalgte elementer får et standard navn og en standard "
"deklarasjonsfil, som begge må endres til passende verdier.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 86
#: rc.cpp:4250
#, no-c-format
msgid "&Delete Widget"
msgstr "&Slett element"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 89
#: rc.cpp:4253
#, no-c-format
msgid "Delete custom widget"
msgstr "Slett skjermelementet"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 92
#: rc.cpp:4256
#, no-c-format
msgid ""
"<b>Delete the selected custom widget.</b>"
"<p>You can only delete widgets that are not used in any open form.</p>"
msgstr ""
"<b>Slett det valgte selvvalgte elementet.</b> "
"<p>Bare elementer som ikke er i bruk i et åpent skjema kan slettes.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 148
#: rc.cpp:4265
#, no-c-format
msgid "Closes the Dialog."
msgstr "Lukker dialogen."
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 175
#: rc.cpp:4268
#, no-c-format
msgid "&Load Descriptions..."
msgstr "&Last inn beskrivelser …"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 178
#: rc.cpp:4271
#, no-c-format
msgid "Loads widget description file"
msgstr "Laster inn fil med elementbeskrivelser"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 182
#: rc.cpp:4274
#, no-c-format
msgid ""
"<b>Load Descriptions</b>"
"<p>Loads a file which contains descriptions of custom widgets, so that these "
"custom widgets can be used in the Qt Designer.</p>\n"
"<p>Since it is a lot of work to type in all the information for custom widgets, "
"you should consider using the tqtcreatecw tool which is in "
"$TQTDIR/tools/designer/tools/tqtcreatecw. Using tqtcreatecw you can create "
"custom widget description files for your custom widgets without the need to "
"type in all the information manually. For more information about the README "
"file in the tqtcreatecw directory</p>"
msgstr ""
"<b>Last beskrivelser</b> "
"<p> Laster inn en fil som inneholder beskrivelser av selvvalgte elementer, slik "
"at disse kan brukes i Qt Designer.</p>\n"
"<p>Siden det krever mye arbeid å taste inn alle opplysninger for egne elementer "
"bør du tenke på å bruke verktøyet tqtcreatecw, som finnes i "
"$TQTDIR/tools/designer/tools/tqtcreatecw. Med tqtcreatecw kan du lage "
"beskrivelsesfiler for dine selvvalgte elementer uten å trenge å taste inn alt "
"manuelt. Mer informasjon finnes i README-fila i tqtcreatecw-mappa</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 190
#: rc.cpp:4278
#, no-c-format
msgid "&Save Descriptions..."
msgstr "Lagre &beskrivelser …"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 193
#: rc.cpp:4281
#, no-c-format
msgid "Saves widget description file"
msgstr "Lagrer elementbeskrivelser til fil"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 196
#: rc.cpp:4284
#, no-c-format
msgid ""
"<b>Save Descriptions</b>"
"<p>Saves all the descriptions of the shown custom widgets to a file which can "
"then be used to import the custom widgets elsewhere."
msgstr ""
"<b>Lagre beskrivelser</b> "
"<p>Lagrer alle beskrivelser av de viste selvvalgte elementene til en fil som "
"siden kan brukes til å laste inn elementene på annet sted."
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 204
#: rc.cpp:4287
#, no-c-format
msgid "Change the properties of the selected custom widget."
msgstr "Endre egenskaper til det valgte egne elementet."
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 211
#: rc.cpp:4290
#, no-c-format
msgid "De&finition"
msgstr "De&finisjon"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 259
#: rc.cpp:4296 rc.cpp:5436 rc.cpp:5493 rc.cpp:5577 rc.cpp:5676 rc.cpp:5814
#: rc.cpp:5886
#, no-c-format
msgid "Select a Pixmap"
msgstr "Velg en pixmap"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 262
#: rc.cpp:4299
#, no-c-format
msgid ""
"<b>Select a pixmap file.</b>"
"<p>The pixmap will be used to represent the widget in forms.</p>"
msgstr ""
"<b>Velg en pixmap-fil.</p> "
"<p>Pixmapen blir brukt til å representere elementet i skjemaer.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 286
#: rc.cpp:4302
#, no-c-format
msgid "Enter filename"
msgstr "Oppgi filnavn"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 289
#: rc.cpp:4305
#, no-c-format
msgid ""
"<b>Change the header file's name for the selected custom widget.</b>"
"<p>The header file will be included by forms using the widget.</p>"
msgstr ""
"<b>Endre navnet på deklarasjonsfila for det valgte egne elementet.</b> "
"<p>Hodefila blir medregnet i skjemaer som bruker elementet.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 306
#: rc.cpp:4311
#, no-c-format
msgid "Choose headerfile"
msgstr "Velg deklarasjonsfil"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 309
#: rc.cpp:4314
#, no-c-format
msgid "Look for the header file using a file dialog."
msgstr "Let etter deklarasjonsfil med en fildialog."
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 315
#: languages/ruby/debugger/variablewidget.cpp:834
#: parts/classview/classtreebase.cpp:154
#: src/profileengine/editor/profileeditor.cpp:139 rc.cpp:4317 rc.cpp:6487
#, no-c-format
msgid "Global"
msgstr "Global"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 320
#: rc.cpp:4320 rc.cpp:6490
#, no-c-format
msgid "Local"
msgstr "Lokal"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 327
#: rc.cpp:4323
#, no-c-format
msgid "Select access"
msgstr "Velg tilgang"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 330
#: rc.cpp:4326
#, no-c-format
msgid ""
"<b>Change how the include file will be included.</b>"
"<p>Global include files will be included using &lt;&gt;-brackets, while local "
"files will included using quotation marks.</p>"
msgstr ""
"<b>Endre hvordan deklarasjonsfila blir inkludert.</b> "
"<p>Globale deklarasjonsfiler inkluderes med tegnene &lt;&gt;, mens lokale filer "
"inkluderes med hermetegn.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 340
#: rc.cpp:4329
#, no-c-format
msgid "Change classname"
msgstr "Endre klassenavn"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 343
#: rc.cpp:4332
#, no-c-format
msgid ""
"<b>Enter the classname for the selected custom widget.</b>"
"<p>A class of that name must be defined in the header file.</p>"
msgstr ""
"<b>Oppgi klassenavn for det valgte egenelementet.</b> "
"<p>Deklarasjonsfila må angi en klasse med det navnet.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 351
#: rc.cpp:4335
#, no-c-format
msgid "Heade&rfile:"
msgstr "Dekla&rasjonsfil:"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 362
#: rc.cpp:4338
#, no-c-format
msgid "Cl&ass:"
msgstr "Kl&asse:"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 373
#: rc.cpp:4341 rc.cpp:5445 rc.cpp:5478
#, no-c-format
msgid "Pixmap:"
msgstr "Pixmap:"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 381
#: rc.cpp:4344
#, no-c-format
msgid "Si&ze hint:"
msgstr "S&tørrelseshint:"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 392
#: rc.cpp:4347
#, no-c-format
msgid "Size p&olicy:"
msgstr "Størrelses&praksis:"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 401
#: lib/widgets/propeditor/propertymachinefactory.cpp:147 rc.cpp:4350
#: rc.cpp:4386
#, no-c-format
msgid "Fixed"
msgstr "Fast"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 406
#: lib/widgets/propeditor/propertymachinefactory.cpp:148 rc.cpp:4353
#: rc.cpp:4389
#, no-c-format
msgid "Minimum"
msgstr "Minimal"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 411
#: lib/widgets/propeditor/propertymachinefactory.cpp:149 rc.cpp:4356
#: rc.cpp:4392
#, no-c-format
msgid "Maximum"
msgstr "Maksimal"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 416
#: lib/widgets/propeditor/propertymachinefactory.cpp:150 rc.cpp:4359
#: rc.cpp:4395
#, no-c-format
msgid "Preferred"
msgstr "Foretrukket"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 421
#: rc.cpp:4362 rc.cpp:4398
#, no-c-format
msgid "MinimumExpanding"
msgstr "Minimal økende"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 426
#: lib/widgets/propeditor/propertymachinefactory.cpp:151 rc.cpp:4365
#: rc.cpp:4401
#, no-c-format
msgid "Expanding"
msgstr "Økende"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 433
#: rc.cpp:4368
#, no-c-format
msgid "Vertical Sizepolicy"
msgstr "Loddrett størrelsespraksis"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 436
#: rc.cpp:4371
#, fuzzy, no-c-format
msgid "Choose the Vertical size policy"
msgstr "Velg loddrett størrelsespraksis"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 453
#: rc.cpp:4374
#, no-c-format
msgid "Size hint width"
msgstr "Bredde for størrelseshint"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 456
#: rc.cpp:4377 rc.cpp:4383
#, no-c-format
msgid ""
"<b>Set the size hint for the selected widget.</b>"
"<p>The size hint provides the recommended size for the widget. Enter a sizehint "
"of -1/-1 if no size is recommended.</p>"
msgstr ""
"<b>Still inn størrelseshint for det valgte elementet.</b> "
"<p>Dette er den anbefalte størrelsen for elementet. Oppgi -1/-1 hvis ingen "
"størrelse er anbefalt.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 473
#: rc.cpp:4380
#, no-c-format
msgid "Size hint height"
msgstr "Høyde for størrelseshint"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 514
#: rc.cpp:4404
#, no-c-format
msgid "Horizontal Sizepolicy"
msgstr "Vannrett størrelsespraksis"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 517
#: rc.cpp:4407
#, no-c-format
msgid "Choose the horizontal size policy for the widget"
msgstr "Velg vannrett størrelsespraksis for elementet"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 542
#: rc.cpp:4410
#, no-c-format
msgid "Con&tainer widget"
msgstr "Be&holderelement"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 545
#: rc.cpp:4413
#, no-c-format
msgid "Container Widget"
msgstr "Beholderelement"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 549
#: rc.cpp:4416
#, no-c-format
msgid ""
"<p><b>Container Widget</b></p>\n"
"<p>If this custom widget is able to contain other widgets (children), check "
"this checkbox.</p>"
msgstr ""
"<p><b>Beholderelement</b></p>\n"
"<p>Hvis dette selvvalgte elementet kan inneholde andre elementer, så sett kryss "
"her.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 559
#: rc.cpp:4420
#, no-c-format
msgid "Si&gnals"
msgstr "Si&gnaler"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 576
#: rc.cpp:4423
#, fuzzy, no-c-format
msgid "The list of all the Q_SIGNALS that the selected widget can emit."
msgstr "Lista over alle signaler som det valgte elementet kan sende."
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 615
#: rc.cpp:4426
#, no-c-format
msgid "N&ew Signal"
msgstr "N&ytt signal"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 621
#: rc.cpp:4429
#, no-c-format
msgid "Add new signal"
msgstr "Legg til nytt signal"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 624
#: rc.cpp:4432
#, no-c-format
msgid ""
"<b>Add a new signal for the current custom widget.</b>"
"<p>An argument list should be provided in the signal's name, and the name must "
"be unique.</p>"
msgstr ""
"<b>Legg til et nytt signal for gjeldende selvvalgte element.</b> "
"<p>Det bør angis en argumentliste i signalets navn, og navnet må være "
"entydig.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 632
#: rc.cpp:4435
#, no-c-format
msgid "Dele&te Signal"
msgstr "Sle&tt signal"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 638
#: rc.cpp:4438
#, no-c-format
msgid "Delete signal"
msgstr "Slett signal"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 641
#: rc.cpp:4441
#, no-c-format
msgid ""
"<b>Delete the signal.</b>"
"<p>All connections using this signal will also be deleted.</p>"
msgstr ""
"<b>Slett signalet.</b> "
"<p>Alle koblinger som bruker dette signalet blir også slettet.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 665
#: rc.cpp:4444
#, no-c-format
msgid "S&ignal:"
msgstr "S&ignal:"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 676
#: rc.cpp:4447
#, no-c-format
msgid "Change signal name"
msgstr "Endre signalnavn"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 679
#: rc.cpp:4450 rc.cpp:4471
#, no-c-format
msgid ""
"<b>Change the name of the selected slot.</b>"
"<p>An argument list should be provided in the signal's name, and the name must "
"be unique.</p>"
msgstr ""
"<b>Endre navn på den valgte spalten.</b> "
"<p>Signalnavnet bør inneholde en argumentliste, og navnet må være entydig.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 691
#: rc.cpp:4453
#, no-c-format
msgid "S&lots"
msgstr "S&palter"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 706
#: kdevdesigner/designer/connectiontable.cpp:41
#: parts/classview/classtreebase.cpp:75 rc.cpp:4456
#, no-c-format
msgid "Slot"
msgstr "Spalte"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 736
#: rc.cpp:4462
#, no-c-format
msgid "The list of all the custom widget's slots."
msgstr "Lista over alle spalter i det selvvalgte elementet."
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 744
#: rc.cpp:4465
#, no-c-format
msgid "Sl&ot:"
msgstr "Sp&alte:"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 755
#: rc.cpp:4468
#, no-c-format
msgid "Change slot name"
msgstr "Endre spaltenavn"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 766
#: rc.cpp:4474 rc.cpp:5307
#, no-c-format
msgid "&Access:"
msgstr "Tilga&ng:"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 787
#: rc.cpp:4483
#, no-c-format
msgid "Change slot access"
msgstr "Endre spaltetilgang"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 790
#: rc.cpp:4486
#, fuzzy, no-c-format
msgid ""
"<b>Change the slot's access policy.</b>"
"<p>You can only connect to the widget's public Q_SLOTS.</p>"
msgstr ""
"<b>Endre tilgangspraksis til spalten.</b> "
"<p>Du kan bare kople til elementets offentlige (public) spalter.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 829
#: rc.cpp:4489
#, no-c-format
msgid "N&ew Slot"
msgstr "N&y spalte"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 835
#: rc.cpp:4492
#, no-c-format
msgid "Add new slot"
msgstr "Legg til ny spalte"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 838
#: rc.cpp:4495
#, no-c-format
msgid ""
"<b>Add a new slot to the current custom widget.</b>"
"<p>An argument list should be provided in the signal's name, and the name must "
"be unique.</p>"
msgstr ""
"<b>Legg til en ny spalte i det selvvalgte elementet.</b> "
"<p>Signalnavnet bør inneholde en argumentliste, og navnet må være entydig.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 846
#: rc.cpp:4498
#, no-c-format
msgid "Dele&te Slot"
msgstr "S&lett spalte"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 852
#: rc.cpp:4501
#, no-c-format
msgid "Delete slot"
msgstr "Slett spalte"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 855
#: rc.cpp:4504
#, no-c-format
msgid ""
"<b>Delete the slot.</b>"
"<p>All connections using this slot will also be deleted.</p>"
msgstr ""
"<b>Slett spalten.</b> "
"<p>Alle tilkoblinger som bruker denne spalten blir også slettet.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 867
#: rc.cpp:4507
#, no-c-format
msgid "&Properties"
msgstr "&Egenskaper"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 915
#: rc.cpp:4510
#, no-c-format
msgid "N&ew Property"
msgstr "N&y egenskap"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 921
#: rc.cpp:4513
#, no-c-format
msgid "Add new property"
msgstr "Legg til ny egenskap"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 924
#: rc.cpp:4516
#, no-c-format
msgid ""
"<b>Add a new property to the current custom widget.</b>"
"<p>The properties must be implemented in the class using Qt's property "
"system.</p>"
msgstr ""
"<b>Legg til en ny egenskap til gjeldende eget element.</b> "
"<p> Egenskapene må implementeres i klassen med Qts egenskapssystem.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 932
#: rc.cpp:4519
#, no-c-format
msgid "Dele&te Property"
msgstr "S&lett egenskap"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 938
#: rc.cpp:4522
#, no-c-format
msgid "Delete property"
msgstr "Slett egenskap"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 941
#: rc.cpp:4525
#, no-c-format
msgid "Deletes the selected property."
msgstr "Sletter den valgte egenskapen."
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 949
#: rc.cpp:4528
#, no-c-format
msgid "String"
msgstr "Streng"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 954
#: rc.cpp:4531
#, no-c-format
msgid "CString"
msgstr "CString"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 959
#: rc.cpp:4534
#, no-c-format
msgid "StringList"
msgstr "StringList"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 964
#: rc.cpp:4537
#, no-c-format
msgid "Bool"
msgstr "Bool"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 969
#: rc.cpp:4540
#, no-c-format
msgid "Int"
msgstr "Int"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 974
#: rc.cpp:4543
#, no-c-format
msgid "UInt"
msgstr "UInt"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 984
#: rc.cpp:4549
#, no-c-format
msgid "Color"
msgstr "Farge"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 989
#: rc.cpp:4552
#, no-c-format
msgid "Rect"
msgstr "Rekt"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 994
#: rc.cpp:4555
#, no-c-format
msgid "Point"
msgstr "Punkt"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 999
#: languages/cpp/app_templates/tdefileplugin/tdefile_plugin.cpp:32 rc.cpp:4558
#, no-c-format
msgid "Size"
msgstr "Størrelse"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 1004
#: rc.cpp:4561
#, no-c-format
msgid "Pixmap"
msgstr "Pixmap"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 1009
#: rc.cpp:4564
#, no-c-format
msgid "Palette"
msgstr "Palett"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 1014
#: rc.cpp:4567
#, no-c-format
msgid "Cursor"
msgstr "Markør"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 1019
#: rc.cpp:4570
#, no-c-format
msgid "SizePolicy"
msgstr "Størrelsespraksis"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 1026
#: rc.cpp:4573
#, no-c-format
msgid "Select property type"
msgstr "Velg egenskapstype"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 1029
#: rc.cpp:4576
#, no-c-format
msgid ""
"<b>Select the type of the property.</b>"
"<p>The property must be implemented in the class using Qt's property system.</p>"
"<p>You can use integer types to support enumeration properties in the property "
"editor.</p>"
msgstr ""
"<b>Velg egenskapens type.</b> "
"<p>Egenskapen må implementeres i klassen med Qts egenskapssystem.</p> "
"<p>Du kan bruke heltallstyper for å støtte tellingsegenskaper i "
"egenskapsredigeringen.</p>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 1065
#: rc.cpp:4585
#, no-c-format
msgid ""
"<b>The list of the current widget's properties.</b>"
"<p>The properties of the custom widget can be changed in the property "
"editor.</p>"
msgstr ""
"<b>Lista over egenskaper til gjeldende element.</b> "
"<p>Egenskapene til det selvvalgte skjermelementet kan endres i "
"egenskapsredigeringen.</b>"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 1073
#: rc.cpp:4588
#, no-c-format
msgid "Change property name"
msgstr "Endre egenskapsnavn"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 1076
#: rc.cpp:4591
#, no-c-format
msgid ""
"<b>Enter a name for the property.</b>"
"<p>The properties must be implemented in the class using Qt's property "
"system.</p>"
msgstr ""
"<b>Oppgi et navn på egenskapen.</b> "
"<p>Egenskapene må implementeres i klassen med Qts egenskapssystem.</p> "
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 1084
#: rc.cpp:4594
#, no-c-format
msgid "P&roperty name:"
msgstr "E&genskapsnavn:"
#. i18n: file ./kdevdesigner/designer/customwidgeteditor.ui line 1095
#: rc.cpp:4597 rc.cpp:6724
#, no-c-format
msgid "T&ype:"
msgstr "T&ype:"
#. i18n: file ./kdevdesigner/designer/projectsettings.ui line 41
#: rc.cpp:4600
#, no-c-format
msgid "Project Settings"
msgstr "Prosjektvalg"
#. i18n: file ./kdevdesigner/designer/projectsettings.ui line 76
#: rc.cpp:4606
#, no-c-format
msgid "&Project file:"
msgstr "&Prosjektfiler:"
#. i18n: file ./kdevdesigner/designer/projectsettings.ui line 87
#: rc.cpp:4609
#, no-c-format
msgid "&Language:"
msgstr "&Språk:"
#. i18n: file ./kdevdesigner/designer/projectsettings.ui line 111
#: rc.cpp:4615
#, no-c-format
msgid "&Database file:"
msgstr "&Databasefil:"
#. i18n: file ./kdevdesigner/designer/projectsettings.ui line 230
#: rc.cpp:4627 rc.cpp:4765 rc.cpp:4898 rc.cpp:5138 rc.cpp:5177 rc.cpp:5346
#: rc.cpp:5385 rc.cpp:5538 rc.cpp:5688 rc.cpp:5751 rc.cpp:5952
#, no-c-format
msgid "Close the dialog and apply all the changes."
msgstr "Lukk dialogen og legg inn alle endringene."
#. i18n: file ./kdevdesigner/designer/projectsettings.ui line 244
#: rc.cpp:4633 rc.cpp:4771 rc.cpp:4904 rc.cpp:4922 rc.cpp:5144 rc.cpp:5189
#: rc.cpp:5352 rc.cpp:5397 rc.cpp:5550 rc.cpp:5700 rc.cpp:5757 rc.cpp:5964
#, no-c-format
msgid "Close the dialog and discard any changes."
msgstr "Lukk dialogen og forkast alle endringer"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 41
#: kdevdesigner/designer/mainwindowactions.cpp:220 rc.cpp:4636
#, no-c-format
msgid "Preferences"
msgstr "Innstillinger"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 47
#: rc.cpp:4639
#, no-c-format
msgid ""
"<b>Preferences</b>"
"<p>Change the preferences of Qt Designer. There is always one tab with general "
"preferences. There may be additional tabs, depending on which plugins are "
"installed.</p>"
msgstr ""
"<b>Innstillinger</b> "
"<p>Endre innstillinger for Qt Designer. Det er alltid en fane med Generelle "
"innstillinger. Det kan finnes flere faner, avhengig av hvilke programtillegg "
"som er installert.</p>"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 79
#: rc.cpp:4645
#, no-c-format
msgid "File Saving"
msgstr "Fillagring"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 90
#: rc.cpp:4648
#, no-c-format
msgid "Enable auto sa&ve"
msgstr "Slå på a&utolagring"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 109
#: rc.cpp:4651
#, no-c-format
msgid "Auto save &interval:"
msgstr "T&idsintervall mellom autolagring:"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 136
#: rc.cpp:4654
#, no-c-format
msgid "Plu&gin Paths"
msgstr "Stier for tille&ggsmoduler"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 166
#: rc.cpp:4657 rc.cpp:4678
#, no-c-format
msgid ""
"A splash screen is displayed when starting Qt Designer if this option is "
"checked."
msgstr ""
"Et velkomstbilde blir vist når Qt Designer startes, hvis dette er slått på."
#. i18n: file ./kdevdesigner/designer/preferences.ui line 191
#: rc.cpp:4663
#, no-c-format
msgid "Restore last &workspace on startup"
msgstr "&Last siste arbeidsområde ved oppstart"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 197
#: rc.cpp:4666
#, no-c-format
msgid "Restore last workspace"
msgstr "Gjenopprett siste arbeidsområde"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 200
#: rc.cpp:4669
#, no-c-format
msgid ""
"The current workspace settings will be restored the next time you start Qt "
"Designer if this option is checked."
msgstr ""
"Innstillinger for gjeldende arbeidsområde vil bli gjenopprettet neste gang Qt "
"startes hvis dette valget er krysset av."
#. i18n: file ./kdevdesigner/designer/preferences.ui line 208
#: rc.cpp:4672
#, no-c-format
msgid "Show &splash screen on startup"
msgstr "Vis &velkomstbilde ved oppstart"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 214
#: rc.cpp:4675
#, no-c-format
msgid "Show Splashscreen"
msgstr "Vis velkomstbilde"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 225
#: rc.cpp:4681
#, no-c-format
msgid "Show start &dialog"
msgstr "Vis start&dialog"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 236
#: rc.cpp:4684
#, no-c-format
msgid "Disable data&base auto-edit in preview"
msgstr "Slå av autoredigering av data&base i forhåndsvisning"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 247
#: rc.cpp:4687
#, no-c-format
msgid "Show toolbutton lab&els"
msgstr "Vis m&erkelapper på verktøyknapper"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 250
#: rc.cpp:4690
#, no-c-format
msgid "Text Labels"
msgstr "Tekstmerkelapper"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 253
#: rc.cpp:4693
#, no-c-format
msgid "Text labels will be used in the toolbars if this is checked."
msgstr "Tekstmerkelapper brukes på verktøylinjene hvis dette er krysset av."
#. i18n: file ./kdevdesigner/designer/preferences.ui line 263
#: rc.cpp:4696
#, no-c-format
msgid "G&rid"
msgstr "&Rutenett"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 286
#: rc.cpp:4699
#, no-c-format
msgid "Sn&ap to grid"
msgstr "&Fest til rutenett"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 292
#: rc.cpp:4702
#, no-c-format
msgid "Snap to the grid"
msgstr "Fest til rutenettet"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 295
#: rc.cpp:4705
#, no-c-format
msgid ""
"<b>Customize the grid-settings for all forms.</b>"
"<p>When <b>Snap to Grid</b> is checked, the widgets snap to the grid using the "
"the X/Y resolution.</p>"
msgstr ""
"<b>Tilpass rutenett-innstillinger for alle skjemaer.</b> "
"<p>Når det er krysset av for <b>Fest til rutenett</b>"
", så flyttes elementene til nærmeste knutepunkt i rutenettet ved bruk av "
"X/Y-oppløsningen.</p>"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 326
#: rc.cpp:4708 rc.cpp:4714
#, no-c-format
msgid "Grid resolution"
msgstr "Rutenett-oppløsning"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 329
#: rc.cpp:4711 rc.cpp:4717
#, no-c-format
msgid ""
"<b>Customize the grid-settings for all forms.</b>"
"<p>When <b>Show Grid</b> is checked, a grid is shown on all forms using the X/Y "
"resolution.</p>"
msgstr ""
"<b>Tilpass rutenett-innstillinger for alle skjemaer.</b> "
"<p> Når det er krysset av for <b>Vis rutenett</b>, så vises et rutenett på alle "
"skjemaer med X/Y-oppløsningen."
#. i18n: file ./kdevdesigner/designer/preferences.ui line 357
#: rc.cpp:4720
#, no-c-format
msgid "Grid-&X:"
msgstr "Rute-&X:"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 368
#: rc.cpp:4723
#, no-c-format
msgid "Grid-&Y:"
msgstr "Rute-&Y:"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 383
#: rc.cpp:4726
#, no-c-format
msgid "Backgro&und"
msgstr "Bakgr&unn"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 417
#: rc.cpp:4729 rc.cpp:5084 rc.cpp:5126 rc.cpp:5712 rc.cpp:5721
#, no-c-format
msgid "Choose a color"
msgstr "Velg en farge"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 420
#: rc.cpp:4732
#, no-c-format
msgid "Select a color in the color dialog."
msgstr "Velg en farge i fargevelgeren."
#. i18n: file ./kdevdesigner/designer/preferences.ui line 431
#: rc.cpp:4735
#, no-c-format
msgid "Co&lor"
msgstr "&Farger"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 434
#: rc.cpp:4738
#, no-c-format
msgid "Use a background color"
msgstr "Bruk en bakgrunnsfarge"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 437
#: rc.cpp:4741
#, no-c-format
msgid "Use a background color."
msgstr "Bruk en bakgrunnsfarge."
#. i18n: file ./kdevdesigner/designer/preferences.ui line 445
#: rc.cpp:4744
#, no-c-format
msgid "&Pixmap"
msgstr "&Pixmap"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 451
#: rc.cpp:4747
#, no-c-format
msgid "Use a background pixmap"
msgstr "Bruk en pixmap som bakgrunn"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 454
#: rc.cpp:4750
#, no-c-format
msgid "Use a background pixmap."
msgstr "Bruk en pixmap som bakgrunn."
#. i18n: file ./kdevdesigner/designer/preferences.ui line 476
#: rc.cpp:4753 rc.cpp:5075
#, no-c-format
msgid "Select a pixmap"
msgstr "Velg en pixmap"
#. i18n: file ./kdevdesigner/designer/preferences.ui line 479
#: rc.cpp:4756
#, no-c-format
msgid "Choose a pixmap file."
msgstr "Velg en pixmap-fil."
#. i18n: file ./kdevdesigner/designer/dbconnectioneditor.ui line 41
#: rc.cpp:4774
#, no-c-format
msgid "Connect"
msgstr "Koble til"
#. i18n: file ./kdevdesigner/designer/dbconnectioneditor.ui line 94
#: rc.cpp:4783
#, no-c-format
msgid "Connection Details"
msgstr "Tilkoblingsdetaljer"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 41
#: kdevdesigner/designer/mainwindowactions.cpp:213 rc.cpp:4786
#, no-c-format
msgid "Form Settings"
msgstr "Skjemainnstillinger"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 47
#: rc.cpp:4789
#, no-c-format
msgid ""
"<b>Form Settings</b>"
"<p>Change settings for the form. Settings like <b>Comment</b> and <b>Author</b> "
"are for your own use and are not required.</p>"
msgstr ""
"<b>Skjemainnstillinger</b> "
"<p>Endre innstillinger for skjemaet. Opplysninger som <b>Kommentar</b> og <b>"
"Forfatter</b> er til ditt eget bruk og er ikke obligatorisk.</p>"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 64
#: rc.cpp:4792
#, no-c-format
msgid "Pixmaps"
msgstr "Bilder"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 81
#: rc.cpp:4795
#, no-c-format
msgid "Save in&line"
msgstr "&Lagre innebygget"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 87
#: rc.cpp:4798
#, no-c-format
msgid "Save pixmaps in the .ui files"
msgstr "Lagre pixmaper i .ui-filene"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 90
#: rc.cpp:4801
#, no-c-format
msgid ""
"<b>Save Inline</b>"
"<p>Saves the pixmaps as binary data in the .ui files. Pixmaps saved like this "
"are not shared between forms. We recommend using Project image files instead."
msgstr ""
"<b>Lagre innebygget</b> "
"<p>Lagrer pixmaper som binærdata i .ui-filene. Pixmaper som er lagret slik er "
"ikke delt mellom skjemaene. Vi anbefaler å bruke Prosjektbilde-filer i stedet."
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 98
#: rc.cpp:4804
#, no-c-format
msgid "Project &image file"
msgstr "Prosjektb&ildefil"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 101
#: rc.cpp:4807
#, no-c-format
msgid "Use the Project's Image file for pixmaps"
msgstr "Bruk projektets bildefil til pixmaper"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 105
#: rc.cpp:4810
#, no-c-format
msgid ""
"<b>Use the Project's Image file for pixmaps</b>\n"
"<p>Each project may have a collection of pixmaps. If you use a project, we "
"recommend that you use this option since it shares the images and is the "
"fastest and most efficient way to use pixmaps in your forms.</p>"
msgstr ""
"<b>Bruk prosjektets bildefil til pixmaper</b>\n"
"<p>Hvert prosjekt kan ha en samling pixmaper. Hvis du bruker et prosjekt, så "
"anbefaler vi at du bruker dette valget siden bildene deles i prosjektet og er "
"den raskeste og mest effektive måten å bruke pixmaper i skjemaene.</p>"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 116
#: rc.cpp:4814
#, no-c-format
msgid ""
"Specify Pixmap-Loader function (only the function's name, no parentheses.)"
msgstr "Oppgi funksjonsnavn for pixmap-laster (bare navnet, ingen parenteser)"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 119
#: rc.cpp:4817
#, no-c-format
msgid ""
"<b>Specify Pixmap-Loader function</b>"
"<p>Specify the function which should be used for loading a pixmap in the "
"generated code. <em>Only enter the function's name, without parentheses.</em>"
msgstr ""
"<b>Oppgi funksjonsnavn for pixmap-laster</b> "
"<p>Oppgi hvilken funksjon som skal brukes til å laste inn en pixmap i den "
"opprettede koden.<em>Oppgi bare funksjonsnavnet, uten parenteser.</em>"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 127
#: rc.cpp:4820
#, no-c-format
msgid "Use &function:"
msgstr "Bruk &funksjon:"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 130
#: rc.cpp:4823
#, no-c-format
msgid "Use the given function for pixmaps"
msgstr "Bruk den oppgitte funksjonen til pixmaper"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 133
#: rc.cpp:4826
#, no-c-format
msgid ""
"<b>Use a given function for pixmaps</b>"
"<p>If you choose this option you must define a function in the line edit at the "
"right which will be used in the generated code for loading pixmaps. When "
"choosing a pixmap in <i>Qt Designer</i> you will be asked to specify the "
"arguments which will be passed to the function in the generated code."
"<p> This approach makes it possible to use your own icon-loader function for "
"loading pixmaps. <i>Qt Designer</i> cannot preview the correct image if you "
"use your own function."
msgstr ""
"<b>Bruk en gitt funksjon til pixmaper</b> "
"<p>Hvis du velger dette må du angi en funksjon i redigeringen til høyre som vil "
"bli brukt til å laste inn pixmaper i den opprettede koden. Når du velger en "
"pixmap i <i>Qt Designer </i> blir du bedt om å oppgi argumentene som blir sendt "
"til funksjonen i den opprettede koden. "
"<p> Dette gjør det mulig å bruke din egen ikon-lastefunksjon til å laste inn "
"pixmaper. <i>Qt Designer</i> kan ikke forhåndsvise det riktige bildet hvis du "
"bruker din egen funksjon."
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 166
#: rc.cpp:4832
#, no-c-format
msgid "Change class name"
msgstr "Endre klassenavn"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 169
#: rc.cpp:4835
#, no-c-format
msgid ""
"<b>Enter the name of the class that will be created.</b>"
"<p><em>classname.h</em> and <em>classname.cpp</em> will be generated as C++ "
"output when it is compiled by uic.</p>"
msgstr ""
"<b>Oppgi navn på klassen som vil bli opprettet.</b> "
"<p><em>klassenavn.h</em> og <em>klassenavn.cpp</em> blir laget som C++ når den "
"blir kompilert med uic.</p>"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 177
#: rc.cpp:4838
#, no-c-format
msgid "A&uthor:"
msgstr "&Forfatter:"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 188
#: rc.cpp:4841
#, no-c-format
msgid "Enter your name"
msgstr "Skriv inn navnet ditt"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 191
#: rc.cpp:4844
#, no-c-format
msgid "Enter your name."
msgstr "Oppgi ditt navn."
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 199
#: parts/quickopen/quickopenclassdialog.cpp:41 rc.cpp:4847 rc.cpp:8013
#, no-c-format
msgid "Class &name:"
msgstr "Klasse&navn:"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 221
#: rc.cpp:4853
#, no-c-format
msgid "Enter a comment about the form."
msgstr "Tast inn en kommentar om skjemaet."
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 242
#: rc.cpp:4856
#, no-c-format
msgid "La&youts"
msgstr "U&tseender"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 278
#: rc.cpp:4859
#, no-c-format
msgid "D&efault spacing:"
msgstr "Stan&dard mellomrom:"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 289
#: rc.cpp:4862
#, no-c-format
msgid "Use func&tions:"
msgstr "Bruk &funksjoner:"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 292
#: rc.cpp:4865
#, no-c-format
msgid "Use functions to get the margin and spacing"
msgstr "Bruk funksjoner til å hente marg og mellomrom"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 295
#: rc.cpp:4868
#, no-c-format
msgid ""
"<b>Use a given function for margin and/or spacing</b>"
"<p>If you choose this option you must define functions in the line edit below "
"which will be used in the generated code for getting the margin and spacing "
"value. <i>Qt Designer</i> cannot preview the correct margin or spacing if you "
"use your own function. Instead, the default values will be used for preview."
msgstr ""
"<b>Bruk en gitt funksjon for marger og/eller mellomrom</b>"
"<p>Om du velger dette, må du angi funksjoner i tekstfeltet nedenfor, som vil "
"bli brukt i den opprettede koden til å hente verdier for marger og mellomrom. "
"<i>Qt Designer</i> kan ikke forhåndsvise riktig marg eller mellomrom hvis du "
"bruker din egen funksjon, standardverdier blir brukt i stedet."
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 322
#: rc.cpp:4871
#, no-c-format
msgid "Default mar&gin:"
msgstr "Standard mar&g:"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 336
#: rc.cpp:4874
#, no-c-format
msgid "S&pacing:"
msgstr "M&ellomrom:"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 358
#: rc.cpp:4877
#, no-c-format
msgid "Ma&rgin:"
msgstr "Ma&rg:"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 383
#: rc.cpp:4880
#, no-c-format
msgid "Specify spacing function (only the function's name, no parentheses.)"
msgstr "Oppgi mellomromsfunksjonen (bare navnet, uten parenteser.)"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 386
#: rc.cpp:4883
#, no-c-format
msgid ""
"<b>Specify spacing function</b>"
"<p>Specify the function which should be used for getting the spacing in the "
"generated code. <em>Only enter the function's name, without parentheses.</em>"
msgstr ""
"<b>Oppgi mellomromsfunksjonen</b> "
"<p>Oppgi funksjonen som skal brukes i den opprettede koden til å hente "
"mellomrommene.<em>Oppgi bare funksjonens navn, uten parenteser.</em>"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 405
#: rc.cpp:4886
#, no-c-format
msgid "Specify margin function (only the function's name, no parentheses.)"
msgstr "Oppgi margfunksjonen (bare navnet, uten parenteser.)"
#. i18n: file ./kdevdesigner/designer/formsettings.ui line 408
#: rc.cpp:4889
#, no-c-format
msgid ""
"<b>Specify margin function</b>"
"<p>Specify the function which should be used for getting the margin in the "
"generated code. <em>Only enter the function's name, without parentheses.</em>"
msgstr ""
"<b>Oppgi margfunksjonen</b> "
"<p>Oppgi funksjonen som skal brukes i den opprettede koden til å hente "
"margene.<em>Oppgi bare funksjonens navn, uten parenteser.</em>"
#. i18n: file ./kdevdesigner/designer/dbconnections.ui line 41
#: rc.cpp:4907
#, no-c-format
msgid "Edit Database Connections"
msgstr "Rediger database-tilkoplinger"
#. i18n: file ./kdevdesigner/designer/dbconnections.ui line 61
#: rc.cpp:4910
#, no-c-format
msgid "&New Connection"
msgstr "&Ny tilkopling"
#. i18n: file ./kdevdesigner/designer/dbconnections.ui line 74
#: rc.cpp:4913
#, no-c-format
msgid "&Delete Connection"
msgstr "&Slett tilkopling"
#. i18n: file ./kdevdesigner/designer/dbconnections.ui line 157
#: kdevdesigner/designer/dbconnectionsimpl.cpp:128
#: kdevdesigner/designer/project.cpp:148
#: kdevdesigner/designer/propertyeditor.cpp:2004
#: kdevdesigner/designer/propertyeditor.cpp:2022 rc.cpp:4925
#, no-c-format
msgid "Connection"
msgstr "Tilkobling"
#. i18n: file ./kdevdesigner/designer/dbconnections.ui line 227
#: rc.cpp:4928
#, no-c-format
msgid "Connec&t"
msgstr "Kople &til"
#. i18n: file ./kdevdesigner/designer/finddialog.ui line 41
#: rc.cpp:4931
#, no-c-format
msgid "Find Text"
msgstr "Finn tekst"
#. i18n: file ./kdevdesigner/designer/finddialog.ui line 72
#: rc.cpp:4934
#, no-c-format
msgid "F&ind:"
msgstr "F&inn:"
#. i18n: file ./kdevdesigner/designer/finddialog.ui line 132
#: rc.cpp:4937
#, no-c-format
msgid "&Find"
msgstr "&Finn"
#. i18n: file ./kdevdesigner/designer/finddialog.ui line 153
#: rc.cpp:4943 rc.cpp:4994
#, no-c-format
msgid "Direction"
msgstr "Retning"
#. i18n: file ./kdevdesigner/designer/finddialog.ui line 170
#: rc.cpp:4946 rc.cpp:4997
#, no-c-format
msgid "Forwar&d"
msgstr "Fo&rover"
#. i18n: file ./kdevdesigner/designer/finddialog.ui line 181
#: rc.cpp:4949 rc.cpp:5000
#, no-c-format
msgid "Bac&kward"
msgstr "Ba&kover"
#. i18n: file ./kdevdesigner/designer/finddialog.ui line 208
#: rc.cpp:4955 rc.cpp:4985
#, no-c-format
msgid "&Whole words only"
msgstr "Bare &hele ord"
#. i18n: file ./kdevdesigner/designer/finddialog.ui line 216
#: rc.cpp:4958 rc.cpp:4988
#, no-c-format
msgid "Case &sensitive"
msgstr "&Skill mellom store og små bokstaver"
#. i18n: file ./kdevdesigner/designer/finddialog.ui line 224
#: rc.cpp:4961 rc.cpp:4991
#, no-c-format
msgid "Start at &beginning"
msgstr "Start ved &begynnelsen"
#. i18n: file ./kdevdesigner/designer/replacedialog.ui line 41
#: rc.cpp:4964
#, no-c-format
msgid "Replace Text"
msgstr "Erstatt tekst"
#. i18n: file ./kdevdesigner/designer/replacedialog.ui line 72
#: rc.cpp:4967
#, no-c-format
msgid "R&eplace:"
msgstr "&Erstatt:"
#. i18n: file ./kdevdesigner/designer/replacedialog.ui line 83
#: rc.cpp:4970
#, no-c-format
msgid "&Find:"
msgstr "&Finn:"
#. i18n: file ./kdevdesigner/designer/replacedialog.ui line 159
#: rc.cpp:4973
#, no-c-format
msgid "&Replace"
msgstr "&Erstatt"
#. i18n: file ./kdevdesigner/designer/replacedialog.ui line 170
#: rc.cpp:4976
#, no-c-format
msgid "Replace &All"
msgstr "Bytt ut a&lle"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 44
#: rc.cpp:5003
#, no-c-format
msgid "Tune Palette"
msgstr "Avstem paletten"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 50
#: rc.cpp:5006
#, no-c-format
msgid ""
"<b>Edit Palette</b>"
"<p>Change the current widget or form's palette.</p>"
"<p>Use a generated palette or select colors for each color group and each color "
"role.</p>"
"<p>The palette can be tested with different widget layouts in the preview "
"section.</p>"
msgstr ""
"<b>Rediger palett</b> "
"<p>Endre fargepaletten for gjeldende element eller skjema.</P> "
"<p>Bruk en opprettet palett eller velg farge for hver fargegruppe og hver "
"fargerolle.</p> "
"<p>Paletten kan testes med forskjellige elementutseender i ruta for "
"forhåndsvisning.</p>"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 87
#: rc.cpp:5009 rc.cpp:5733
#, no-c-format
msgid "Select &palette:"
msgstr "Velg &palett:"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 96
#: rc.cpp:5012 rc.cpp:5736
#, no-c-format
msgid "Active Palette"
msgstr "Aktiv palett"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 101
#: rc.cpp:5015 rc.cpp:5739
#, no-c-format
msgid "Inactive Palette"
msgstr "Inaktiv palett"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 106
#: rc.cpp:5018 rc.cpp:5742
#, no-c-format
msgid "Disabled Palette"
msgstr "Avslått palett"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 126
#: rc.cpp:5021
#, no-c-format
msgid "Auto"
msgstr "Auto"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 143
#: rc.cpp:5024
#, no-c-format
msgid "Build the &inactive palette from the active palette"
msgstr "Bygg den &inaktive paletten fra den aktive"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 154
#: rc.cpp:5027
#, no-c-format
msgid "Build the &disabled palette from the active palette"
msgstr "Bygg den &avslåtte paletten fra den aktive"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 167
#: rc.cpp:5030
#, no-c-format
msgid "Central Color Roles"
msgstr "Sentrale fargerollere"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 182
#: rc.cpp:5033
#, no-c-format
msgid "Background"
msgstr "Bakgrunn"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 187
#: rc.cpp:5036
#, no-c-format
msgid "Foreground"
msgstr "Forgrunn"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 192
#: rc.cpp:5039
#, no-c-format
msgid "Button"
msgstr "Knapp"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 197
#: rc.cpp:5042
#, no-c-format
msgid "Base"
msgstr "Basis"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 202
#: kdevdesigner/designer/mainwindow.cpp:1735
#: kdevdesigner/designer/mainwindow.cpp:2638 rc.cpp:5045
#, no-c-format
msgid "Text"
msgstr "Tekst"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 207
#: rc.cpp:5048
#, no-c-format
msgid "BrightText"
msgstr "Lys tekst"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 212
#: rc.cpp:5051
#, no-c-format
msgid "ButtonText"
msgstr "Knappetest"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 217
#: rc.cpp:5054
#, no-c-format
msgid "Highlight"
msgstr "Uthev"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 222
#: rc.cpp:5057
#, no-c-format
msgid "HighlightText"
msgstr "Fremhevet tekst"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 227
#: rc.cpp:5060
#, no-c-format
msgid "Link"
msgstr "Lenke"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 232
#: rc.cpp:5063
#, no-c-format
msgid "LinkVisited"
msgstr "Besøkt lenke"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 239
#: rc.cpp:5066
#, no-c-format
msgid "Choose the central color role"
msgstr "Besøkt lenke"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 242
#: rc.cpp:5069
#, no-c-format
msgid ""
"<b>Select a color role.</b>"
"<p>Available central color roles are: "
"<ul> "
"<li>Background - general background color.</li> "
"<li>Foreground - general foreground color. </li> "
"<li>Base - used as the background color for example, for text entry widgets; it "
"is usually white or another light color. </li> "
"<li>Text - the forground color used with Base. Usually this is the same as the "
"Foreground, in which case it must provide good contrast both with the "
"Background and with the Base. </li> "
"<li>Button - general button background color; useful where buttons need a "
"background different from Background, as in the Macintosh style. </li> "
"<li>ButtonText - a foreground color used with the Button color. </li> "
"<li>Highlight - a color used to indicate a selected or highlighted item. </li> "
"<li>HighlightedText - a text color that contrasts to Highlight. </li> "
"<li>BrightText - a text color that is very different from Foreground and "
"contrasts well with, for example, black. </li> </ul> </p>"
msgstr ""
"<b>Velg en fargerolle.</b>' "
"<p>Tilgjengelige sentrale fargeroller er: "
"<ul> "
"<li>Bakgrunn generell bakgrunnsfarge.</li> "
"<li>Forgrunn generell forgrunnsfarge.</li> "
"<li>Basis brukt for eksempel som bakgrunnsfarge i tekstfelter. Dette er som "
"regel hvitt eller en annen lys farge. </li> "
"<li>Tekst forgrunnsfarge brukt sammen med Basis. Dette er som regel det samme "
"som Forgrunn, og da må det gi god kontrast både med Bakgrunn og Basis.</li> "
"<li>Knapp generell bakgrunnsfarge for knapper, nyttig der knapper trenger en "
"annen bakgrunn, slik som i Macintosh-stil. </li> "
"<li>Knappetekst en forgrunnsfarge til bruk med Knapp.</li> "
"<li>Fremhevet en farge som viser et markert eller fremhevet element. </li> "
"<li>Fremhevet tekst en farge som gir kontrast til Fremhevet. </li> "
"<li>Lys tekst en tekstfarge som er svært forskjellig fra Forgrunn og gir god "
"kontrast til, for eksempel, svart. </li></ul></p>"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 287
#: rc.cpp:5072
#, no-c-format
msgid "Choose pi&xmap:"
msgstr "Velg pi&xmap:"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 313
#: rc.cpp:5078
#, no-c-format
msgid "Choose a pixmap file for the selected central color role."
msgstr "Velg en pixmap-fil for den valgte sentrale fargerollen."
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 333
#: rc.cpp:5081
#, no-c-format
msgid "&Select color:"
msgstr "&Velg farge:"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 359
#: rc.cpp:5087
#, no-c-format
msgid "Choose a color for the selected central color role."
msgstr "Velg en farge for den valgte sentraqle fargerollen."
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 371
#: rc.cpp:5090
#, no-c-format
msgid "3-D Shadow Effects"
msgstr "3-D skyggeeffekter"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 402
#: rc.cpp:5093
#, no-c-format
msgid "Build &from button color:"
msgstr "Bygg &fra knappefargen:"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 408
#: rc.cpp:5096
#, no-c-format
msgid "Generate shadings"
msgstr "Lag skygger"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 411
#: rc.cpp:5099
#, no-c-format
msgid "Check to let 3D-effect colors be calculated from the button-color."
msgstr "Kryss av for å få beregnet farger for 3D-effekt ut fra knappefargen."
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 417
#: rc.cpp:5102
#, no-c-format
msgid "Light"
msgstr "Lys"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 422
#: rc.cpp:5105
#, no-c-format
msgid "Midlight"
msgstr "Mellomlys"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 427
#: rc.cpp:5108
#, no-c-format
msgid "Mid"
msgstr "Mellom"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 432
#: rc.cpp:5111
#, no-c-format
msgid "Dark"
msgstr "Mørk"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 437
#: rc.cpp:5114
#, no-c-format
msgid "Shadow"
msgstr "Skygge"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 444
#: rc.cpp:5117
#, no-c-format
msgid "Choose 3D-effect color role"
msgstr "Velg fargerolle for 3D-effekt"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 447
#: rc.cpp:5120
#, no-c-format
msgid ""
"<b>Select a color effect role.</b>"
"<p>Available effect roles are: "
"<ul> "
"<li>Light - lighter than Button color. </li> "
"<li>Midlight - between Button and Light. </li> "
"<li>Mid - between Button and Dark. </li> "
"<li>Dark - darker than Button. </li> "
"<li>Shadow - a very dark color. </li> </ul>"
msgstr ""
"<b>Velg en rolle for fargeeffekter.</b> "
"<p>Tilgjengelige effektroller er: "
"<ul> "
"<li>Lys lysere enn Knapp-fargen. </li> "
"<li>Mellomlys mellom Knapp og Lys. </li> "
"<li>Mellom mellom Knapp og Mørk. </li> "
"<li>Mørk mørkere enn Knapp. </li> "
"<li>Skygge en svært mørk farge. </li> </ul>"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 500
#: rc.cpp:5123
#, no-c-format
msgid "Select co&lor:"
msgstr "Ve&lg farge:"
#. i18n: file ./kdevdesigner/designer/paletteeditoradvanced.ui line 526
#: rc.cpp:5129
#, no-c-format
msgid "Choose a color for the selected effect color role."
msgstr "Velg en farge for den valgte effekt-rollen."
#. i18n: file ./kdevdesigner/designer/gotolinedialog.ui line 46
#: kdevdesigner/designer/mainwindowactions.cpp:289 rc.cpp:5147
#, no-c-format
msgid "Goto Line"
msgstr "Gå til linje"
#. i18n: file ./kdevdesigner/designer/gotolinedialog.ui line 63
#: rc.cpp:5150
#, no-c-format
msgid "&Line:"
msgstr "&Linje:"
#. i18n: file ./kdevdesigner/designer/gotolinedialog.ui line 116
#: rc.cpp:5153
#, no-c-format
msgid "&Goto"
msgstr "&Gå til"
#. i18n: file ./kdevdesigner/designer/wizardeditor.ui line 41
#: rc.cpp:5159
#, no-c-format
msgid "Wizard Page Editor"
msgstr "Redigering av veiviser-side"
#. i18n: file ./kdevdesigner/designer/wizardeditor.ui line 86
#: rc.cpp:5162
#, no-c-format
msgid "Wizard pages:"
msgstr "Veiviser-sider:"
#. i18n: file ./kdevdesigner/designer/wizardeditor.ui line 115
#: rc.cpp:5165
#, no-c-format
msgid "A&dd"
msgstr "&Legg til"
#. i18n: file ./kdevdesigner/designer/wizardeditor.ui line 239
#: rc.cpp:5183 rc.cpp:5391 rc.cpp:5544 rc.cpp:5694 rc.cpp:5958
#, no-c-format
msgid "Apply all changes."
msgstr "Tilbakestill alle endringer."
#. i18n: file ./kdevdesigner/designer/multilineeditor.ui line 41
#: rc.cpp:5192
#, no-c-format
msgid "Edit Text"
msgstr "Rediger tekst"
#. i18n: file ./kdevdesigner/designer/multilineeditor.ui line 44
#: rc.cpp:5195
#, no-c-format
msgid ""
"<b>Multiline Edit</b>"
"<p>This is a simple richtext editor. To improve its usability it provides "
"toolbar items for the most common html tags: by clicking on a toolbar item, the "
"corresponding tag will be written to the editor, where you can insert your "
"text. If you have already written some text and want to format it, hilight it "
"and click on the desired button. To improve visualization this editor also "
"supports a simple html-syntax-highlighting scheme."
msgstr ""
"<b>Flerlinje skrivefelt</b> "
"<p>Dette er et enkelt skriveprogram for beriket tekst. Det får øket bruksverdi "
"ved at det har verktøylinjer for de vanligste html-merkene: om det trykkes på "
"en knapp på verktøylinja settes det tilsvarende merket inn i skrivefeltet der "
"teksten kan skrives inn. Hvis det allerede er skrevet inn tekst som skal "
"formateres, kan teksten markeres og ønsket knapp trykkes. Det brukes også en "
"enkel syntaks-fremheving for html for å bedre leseligheten."
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 41
#: kdevdesigner/designer/editfunctionsimpl.cpp:216 rc.cpp:5210
#, no-c-format
msgid "Edit Functions"
msgstr "Rediger funksjoner"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 47
#: rc.cpp:5213
#, no-c-format
msgid ""
"<b>Edit Functions</b>"
"<p>Add, edit or delete the current form's slots or functions.</p>"
"<p>Click the <b>Add Function</b>-button to create a new function; enter a name, "
"choose an access mode and specify if it should be a slot or normal function.</p>"
"<p>Select an entry from the list and click the <b>Delete Function</b>"
"-button to remove a function; in case of a slot all connections using this slot "
"will also be removed.</p>"
msgstr ""
"<b>Rediger funksjoner</b> <b>Legg til, endre eller slett spalter eller "
"funksjoner i gjeldende skjema.</p> "
"<p>Trykk knappen <b>Legg til funksjon</b> for å lage en ny funksjon, oppgi et "
"navn, velg tilgangsmodus og oppgi om det skal være en spalte eller en normal "
"funksjon.</p> "
"<p>Velg et element i lista og trykk <b>Slett funksjon</b> "
"for å fjerne en funksjon, hvis dette er en spalte til alle tilkoplinger som "
"bruker denne spalten også fjernet.</p>"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 62
#: parts/classview/classtreebase.cpp:79 rc.cpp:5216
#, no-c-format
msgid "Function"
msgstr "Funksjon"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 73
#: rc.cpp:5219 rc.cpp:6658 rc.cpp:6766 rc.cpp:8167
#, no-c-format
msgid "Return Type"
msgstr "Returtype"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 84
#: rc.cpp:5222 rc.cpp:6763 rc.cpp:8164
#, no-c-format
msgid "Specifier"
msgstr "Spesifikator"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 117
#: rc.cpp:5231
#, no-c-format
msgid "In Use"
msgstr "I bruk"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 150
#: rc.cpp:5234
#, no-c-format
msgid ""
"<b>This form's functions.</b>"
"<p>Select the function you want to change or delete.</p>"
msgstr ""
"<b>Funksjoner i dette skjemaet</b> "
"<p>Velg funksjonen du vil endre eller slette.</p>"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 172
#: rc.cpp:5237
#, fuzzy, no-c-format
msgid "Only d&isplay slots"
msgstr "V&is bare spalter"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 175
#: rc.cpp:5240
#, no-c-format
msgid "Change displaying mode for functions"
msgstr "Endre visningsmodus for funksjoner"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 179
#: rc.cpp:5243
#, no-c-format
msgid ""
"<b>Check this button if only the slots should be displayed</b>"
"<p>Otherwise all functions, i.e. normal C++ functions and slots are "
"displayed.</p>\n"
msgstr ""
"<b>Trykk denne knappen om bare spalter skal vises.</b> "
"<p> Ellers vises alle funksjoner, dvs. normale C++-funksjoner og spalter "
"vises.</p>\n"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 204
#: rc.cpp:5247
#, no-c-format
msgid "&New Function"
msgstr "&Ny funksjon"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 207
#: rc.cpp:5250
#, no-c-format
msgid "Add new function"
msgstr "Legg til ny funksjon"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 210
#: rc.cpp:5253
#, no-c-format
msgid ""
"<b>Add a new function.</b>"
"<p>New functions have a default name and public access.</p>"
msgstr ""
"<b>Legg til en ny funksjon.</b> "
"<p>Nye funksjoner får et standardnavn og offentlig tilgang (public).</p>"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 218
#: rc.cpp:5256
#, no-c-format
msgid "&Delete Function"
msgstr "&Slett funksjon"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 221
#: rc.cpp:5259
#, no-c-format
msgid "Delete function"
msgstr "Slett funksjon"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 224
#: rc.cpp:5262
#, no-c-format
msgid ""
"<b>Delete the selected function.</b>"
"<p>All connections using this function are also removed.</p>"
msgstr ""
"<b>Slett den valgte funksjonen.</b> "
"<p>Alle tilkoplinger som bruker denne funksjonen blir også fjernet.</p>"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 242
#: rc.cpp:5265
#, no-c-format
msgid "Function Properties"
msgstr "Funksjonsegenskaper"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 284
#: rc.cpp:5268
#, fuzzy, no-c-format
msgid "&Function:"
msgstr "F&unksjon:"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 306
#: rc.cpp:5271
#, no-c-format
msgid "Change function name"
msgstr "Endre funksjonsnavn"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 309
#: rc.cpp:5274
#, no-c-format
msgid ""
"<b>Change the name of the selected function.</b>"
"<p>The name should include the argument list and must be syntactically "
"correct.</p>"
msgstr ""
"<b>Endre navnet på den valgte funksjonen.</b> "
"<p>Navnet bør inkludere argumentlista og må være syntaktisk korrekt.</p>"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 317
#: rc.cpp:5277
#, no-c-format
msgid "&Return type:"
msgstr "Returt&ype:"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 339
#: rc.cpp:5280
#, no-c-format
msgid "Change the return type of the function"
msgstr "Endre funksjonens returtype"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 342
#: rc.cpp:5283
#, no-c-format
msgid ""
"<b>Change the return type of the selected function.</b>"
"<p>Specifiy here the datatype which should be returned by the function.</p>"
msgstr ""
"<b>Endre den valgte funksjonens returtype.</b> "
"<p>Oppgi her datatypen som funksjonen skal returnere.</p>"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 380
#: rc.cpp:5286
#, no-c-format
msgid "S&pecifier:"
msgstr "S&pesifikator:"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 392
#: rc.cpp:5289
#, fuzzy, no-c-format
msgid "non virtual"
msgstr "Virtuell"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 397
#: rc.cpp:5292
#, fuzzy, no-c-format
msgid "virtual"
msgstr "Virtuell"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 402
#: rc.cpp:5295
#, fuzzy, no-c-format
msgid "pure virtual"
msgstr "Virtuell"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 407
#: rc.cpp:5298
#, fuzzy, no-c-format
msgid "static"
msgstr "start"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 422
#: rc.cpp:5301 rc.cpp:5319
#, no-c-format
msgid "Change function access"
msgstr "Endre funksjonstilgang"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 425
#: rc.cpp:5304 rc.cpp:5322
#, no-c-format
msgid ""
"<b>Change the access policy of the function</b>"
"<p>All functions are created virtual and should be reimplemented in "
"subclasses.</p>"
msgstr ""
"<b>Endre tilgangspraksis for funksjonen</b> "
"<p>Alle funksjoner er opprettet som virtuelle og bør re-implementeres i "
"underklasser.</p>"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 493
#: parts/ctags2/ctagskinds.cpp:52 rc.cpp:5328
#, no-c-format
msgid "slot"
msgstr "spalte"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 498
#: parts/ctags2/ctagskinds.cpp:37 parts/ctags2/ctagskinds.cpp:44
#: parts/ctags2/ctagskinds.cpp:62 parts/ctags2/ctagskinds.cpp:95
#: parts/ctags2/ctagskinds.cpp:121 parts/ctags2/ctagskinds.cpp:133
#: parts/ctags2/ctagskinds.cpp:147 parts/ctags2/ctagskinds.cpp:154
#: parts/ctags2/ctagskinds.cpp:167 parts/ctags2/ctagskinds.cpp:174
#: parts/ctags2/ctagskinds.cpp:181 parts/ctags2/ctagskinds.cpp:187
#: parts/ctags2/ctagskinds.cpp:200 rc.cpp:5331
#, no-c-format
msgid "function"
msgstr "funksjon"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 505
#: rc.cpp:5334
#, no-c-format
msgid "Change function type"
msgstr "Endre funksjonstype"
#. i18n: file ./kdevdesigner/designer/editfunctions.ui line 508
#: rc.cpp:5337
#, no-c-format
msgid ""
"<b>Change the type of the function.</b>"
"<p>The type specifies if the function is either a slot or a normal C++ "
"function.</p>"
msgstr ""
"<b>Endre funksjonstype.</b> "
"<p>Typen oppgir om funksjonen er enten en spalte eller en normal "
"C++-funksjon.</p>"
#. i18n: file ./kdevdesigner/designer/configtoolboxdialog.ui line 41
#: kdevdesigner/designer/mainwindowactions.cpp:605 rc.cpp:5355
#, no-c-format
msgid "Configure Toolbox"
msgstr "Sett opp verktøykasse"
#. i18n: file ./kdevdesigner/designer/configtoolboxdialog.ui line 132
#: rc.cpp:5367
#, no-c-format
msgid "Available Tools"
msgstr "Tilgjengelige verktøy"
#. i18n: file ./kdevdesigner/designer/configtoolboxdialog.ui line 175
#: rc.cpp:5373
#, no-c-format
msgid "Common Widgets Page"
msgstr "Side med felles elementer"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 41
#: rc.cpp:5376
#, no-c-format
msgid "Edit Table"
msgstr "Rediger tabell"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 168
#: rc.cpp:5400 rc.cpp:5865
#, no-c-format
msgid "Co&lumns"
msgstr "Ko&lonner"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 230
#: rc.cpp:5403 rc.cpp:5457 rc.cpp:5610 rc.cpp:5841 rc.cpp:5937
#, no-c-format
msgid "Move up"
msgstr "Flytt opp"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 233
#: rc.cpp:5406 rc.cpp:5460
#, no-c-format
msgid ""
"<b>Move the selected item up.</b>"
"<p>The top-most column will be the first column of the list.</p>"
msgstr ""
"<b>Flytt det valgte elementet opp.</b> "
"<p>Den øverste kolonnen blir første kolonne i lista.</p>"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 247
#: rc.cpp:5409 rc.cpp:5463 rc.cpp:5616 rc.cpp:5847 rc.cpp:5922
#, no-c-format
msgid "Move down"
msgstr "Flytt ned"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 250
#: rc.cpp:5412 rc.cpp:5466
#, no-c-format
msgid ""
"<b>Move the selected item down.</b>"
"<p>The top-most column will be the first column of the list.</p>"
msgstr ""
"<b>Flytt det valgte elementet ned.</b> "
"<p>Den øverste kolonnen blir første kolonne i lista.</p>"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 258
#: rc.cpp:5415 rc.cpp:5913
#, no-c-format
msgid "&Delete Column"
msgstr "S&lett kolonne"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 266
#: rc.cpp:5418 rc.cpp:5928
#, no-c-format
msgid "&New Column"
msgstr "&Ny kolonne"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 288
#: rc.cpp:5421
#, no-c-format
msgid "Table:"
msgstr "Tabell:"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 310
#: rc.cpp:5424 rc.cpp:5481 rc.cpp:5565 rc.cpp:5664 rc.cpp:5802 rc.cpp:5874
#, no-c-format
msgid "Label4"
msgstr "Label4"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 330
#: rc.cpp:5427 rc.cpp:5484 rc.cpp:5568 rc.cpp:5667 rc.cpp:5805 rc.cpp:5877
#, no-c-format
msgid "Delete Pixmap"
msgstr "Slett pixmap"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 333
#: rc.cpp:5430 rc.cpp:5487 rc.cpp:5808
#, no-c-format
msgid ""
"<b>Delete the selected item's pixmap.</b>"
"<p>The pixmap in the current column of the selected item will be deleted.</p>"
msgstr ""
"<b>Slett det valgte elementets pixmap.</b> "
"<p>Pixmapen i gjeldende kolonne for det valgte elementet blir slettet.</p>"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 353
#: rc.cpp:5439 rc.cpp:5496 rc.cpp:5817
#, no-c-format
msgid ""
"<b>Select a pixmap file for the item.</b>"
"<p>The pixmap will be changed in the current column of the selected item.</p>"
msgstr ""
"<b>Velg en pixmap-fil for elementet.</b> "
"<p>Pixmapen blir endret i gjeldende kolonne for det valgte elementet.</p>"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 363
#: rc.cpp:5442 rc.cpp:5475
#, no-c-format
msgid "&Label:"
msgstr "&Etikett:"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 385
#: rc.cpp:5448
#, no-c-format
msgid "&Field:"
msgstr "&Felt:"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 409
#: rc.cpp:5451
#, no-c-format
msgid "<no table>"
msgstr "<ingen tabell>"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 421
#: rc.cpp:5454
#, no-c-format
msgid "&Rows"
msgstr "&Rader"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 511
#: rc.cpp:5469
#, no-c-format
msgid "&New Row"
msgstr "&Ny rad"
#. i18n: file ./kdevdesigner/designer/tableeditor.ui line 519
#: rc.cpp:5472
#, no-c-format
msgid "&Delete Row"
msgstr "&Slett Rad"
#. i18n: file ./kdevdesigner/designer/dbconnection.ui line 41
#: rc.cpp:5499
#, no-c-format
msgid "Edit Database Connection"
msgstr "Rediger database-tilkopling"
#. i18n: file ./kdevdesigner/designer/dbconnection.ui line 58
#: rc.cpp:5502
#, no-c-format
msgid "&Database name:"
msgstr "&Databasenavn:"
#. i18n: file ./kdevdesigner/designer/dbconnection.ui line 69
#: rc.cpp:5505
#, no-c-format
msgid "&Username:"
msgstr "Br&ukernavn:"
#. i18n: file ./kdevdesigner/designer/dbconnection.ui line 80
#: rc.cpp:5508
#, no-c-format
msgid "&Password:"
msgstr "&Passord:"
#. i18n: file ./kdevdesigner/designer/dbconnection.ui line 91
#: rc.cpp:5511
#, no-c-format
msgid "D&river:"
msgstr "D&river:"
#. i18n: file ./kdevdesigner/designer/dbconnection.ui line 110
#: rc.cpp:5514
#, no-c-format
msgid "&Hostname:"
msgstr "&Vertsnavn:"
#. i18n: file ./kdevdesigner/designer/dbconnection.ui line 151
#: rc.cpp:5520
#, no-c-format
msgid "P&ort:"
msgstr "P&ort:"
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 41
#: rc.cpp:5526
#, no-c-format
msgid "Edit Listbox"
msgstr "Rediger listeboks"
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 47
#: rc.cpp:5529
#, no-c-format
msgid ""
"<b>Edit Listbox</b>"
"<p>Add, edit or delete items in the listbox.</p>"
"<p>Click the <b>New Item</b>-button to create a new listbox entry, then enter "
"text and choose a pixmap.</p>"
"<p>Select an item from the list and click the <b>Delete Item</b>"
"-button to remove the item from the list.</p>"
msgstr ""
"<b>rediger listeboks</b> "
"<p>Legg til, endre eller slett elementer i listeboksen.</p> "
"<p>Trykk på knappen <b>Nytt element</b> for å lage et nytt element i "
"listeboksen, tast så inn tekst og velg en pixmap. "
"<p>Velg et element i lista og trykk knappen <b>Slett element</b> "
"for å fjerne elementet fra lista.</p>"
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 153
#: kdevdesigner/designer/actiondnd.cpp:399 rc.cpp:5553 rc.cpp:5604
#, no-c-format
msgid "Delete Item"
msgstr "Slett element"
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 156
#: rc.cpp:5556 rc.cpp:5829
#, no-c-format
msgid "The list of items."
msgstr "Elementlista."
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 164
#: rc.cpp:5559 rc.cpp:5649
#, no-c-format
msgid "&Item Properties"
msgstr "&Element-egenskaper"
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 181
#: rc.cpp:5562 rc.cpp:5661 rc.cpp:5871
#, no-c-format
msgid "&Pixmap:"
msgstr " &Primær:"
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 215
#: rc.cpp:5571 rc.cpp:5670
#, no-c-format
msgid "Delete the selected item's pixmap."
msgstr "Slett det valgte elementets pixmap."
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 235
#: rc.cpp:5580
#, no-c-format
msgid "Choose a pixmap file for the selected item."
msgstr "Velg en pixmap-fil for det valgte elementet."
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 243
#: rc.cpp:5583 rc.cpp:5652 rc.cpp:5784 rc.cpp:5892
#, no-c-format
msgid "&Text:"
msgstr "&Tekst:"
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 260
#: rc.cpp:5586 rc.cpp:5655 rc.cpp:5787
#, no-c-format
msgid "Change text"
msgstr "Endre tekst"
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 263
#: rc.cpp:5589
#, no-c-format
msgid "Change the selected item's text."
msgstr "Sletter teksten i det valgte elementet."
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 273
#: rc.cpp:5592 rc.cpp:5631 rc.cpp:5820
#, no-c-format
msgid "&New Item"
msgstr "&Nytt element"
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 276
#: rc.cpp:5595 rc.cpp:5634 rc.cpp:5823
#, no-c-format
msgid "Add an item"
msgstr "Legg til et element"
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 279
#: rc.cpp:5598
#, no-c-format
msgid "<b>Add a new item.</b><p>New items are appended to the list.</p>"
msgstr ""
"<b>Legg til et nytt element.</b>"
"<p>Nye elementer legges til sist i lista.</p>"
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 287
#: rc.cpp:5601 rc.cpp:5640 rc.cpp:5769
#, no-c-format
msgid "&Delete Item"
msgstr "&Slett element"
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 293
#: rc.cpp:5607
#, no-c-format
msgid "Delete the selected item"
msgstr "Slett det valgte elementet"
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 327
#: rc.cpp:5613
#, no-c-format
msgid "Moves the selected item up."
msgstr "Flytter det valgte elementet opp."
#. i18n: file ./kdevdesigner/designer/listboxeditor.ui line 344
#: rc.cpp:5619
#, no-c-format
msgid "Move the selected item down."
msgstr "Flytter det valgte elementet ned."
#. i18n: file ./kdevdesigner/designer/iconvieweditor.ui line 41
#: rc.cpp:5622
#, no-c-format
msgid "Edit Iconview"
msgstr "Rediger ikonvisning"
#. i18n: file ./kdevdesigner/designer/iconvieweditor.ui line 47
#: rc.cpp:5625
#, no-c-format
msgid ""
"<b>Edit Iconview</b>"
"<p>Add, edit or delete items in the icon view.</p>"
"<p>Click the <b>New Item</b>-button to create a new item, then enter text and "
"choose a pixmap.</p>"
"<p>Select an item from the view and click the <b>Delete Item</b>"
"-button to remove the item from the iconview.</p>"
msgstr ""
"<b>Rediger ikonvisning</b> "
"<p>Legg til, endre eller slett elementer i ikonvisningen.</p> "
"<p>Trykk på <b>Nytt element</b>-knappen for å opprette et nytt element, tast så "
"inn tekst og velg en pixmap.</p> "
"<p>Velg et element i visningen og trykk knappen <b>Slett element</b> "
"for å slette elementet fra ikonvisningen.</p>"
#. i18n: file ./kdevdesigner/designer/iconvieweditor.ui line 78
#: rc.cpp:5628
#, no-c-format
msgid "All items in the iconview."
msgstr "Alle elementer i ikonvisningen."
#. i18n: file ./kdevdesigner/designer/iconvieweditor.ui line 106
#: rc.cpp:5637
#, no-c-format
msgid "Create a new item for the iconview."
msgstr "Opprett et nytt element for ikonvisningen."
#. i18n: file ./kdevdesigner/designer/iconvieweditor.ui line 117
#: rc.cpp:5643 rc.cpp:5772
#, no-c-format
msgid "Delete item"
msgstr "Slett element"
#. i18n: file ./kdevdesigner/designer/iconvieweditor.ui line 120
#: rc.cpp:5646
#, no-c-format
msgid "Delete the selected item."
msgstr "Slett det valgte elementet."
#. i18n: file ./kdevdesigner/designer/iconvieweditor.ui line 192
#: rc.cpp:5658
#, no-c-format
msgid "Change the text for the selected item."
msgstr "Endre tekst for det valgte elementet."
#. i18n: file ./kdevdesigner/designer/iconvieweditor.ui line 268
#: rc.cpp:5679
#, no-c-format
msgid "Select a pixmap file for the current item."
msgstr "Velg en pixmap-fil for gjeldende element."
#. i18n: file ./kdevdesigner/designer/paletteeditor.ui line 47
#: rc.cpp:5703
#, no-c-format
msgid "Edit Palette"
msgstr "Rediger paletten"
#. i18n: file ./kdevdesigner/designer/paletteeditor.ui line 70
#: rc.cpp:5706
#, no-c-format
msgid "Build Palette"
msgstr "Bygg palett"
#. i18n: file ./kdevdesigner/designer/paletteeditor.ui line 111
#: rc.cpp:5709
#, no-c-format
msgid "&3-D effects:"
msgstr "&3-D effekter:"
#. i18n: file ./kdevdesigner/designer/paletteeditor.ui line 140
#: rc.cpp:5715
#, no-c-format
msgid "Choose the effect-color for the generated palette."
msgstr "Velg effektfarge for den opprettede paletten."
#. i18n: file ./kdevdesigner/designer/paletteeditor.ui line 169
#: rc.cpp:5718
#, no-c-format
msgid "Back&ground:"
msgstr "Bak&grunn:"
#. i18n: file ./kdevdesigner/designer/paletteeditor.ui line 198
#: rc.cpp:5724
#, no-c-format
msgid "Choose the background color for the generated palette."
msgstr "Velg bakgrunnsfarge for den opprettede paletten."
#. i18n: file ./kdevdesigner/designer/paletteeditor.ui line 223
#: rc.cpp:5727
#, no-c-format
msgid "&Tune Palette..."
msgstr "&Tilpass palett …"
#. i18n: file ./kdevdesigner/designer/paletteeditor.ui line 239
#: rc.cpp:5730
#, no-c-format
msgid "Preview"
msgstr "Forhåndsvisning"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 41
#: rc.cpp:5760
#, no-c-format
msgid "Edit Listview"
msgstr "Rediger listevisning"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 47
#: rc.cpp:5763
#, no-c-format
msgid ""
"<b>Edit Listview</b>"
"<p>Use the controls on the <b>Items</b>-tab to add, edit or delete items in the "
"listview. Change the column configuration of the listview using the controls on "
"the <b>Columns</b>-tab.</p>Click the <b>New Item</b>"
"-button to create a new item, then enter text and add a pixmap.</p>"
"<p>Select an item from the list and click the <b>Delete Item</b>"
"-button to remove the item from the list.</p>"
msgstr ""
"<b>Rediger listevisning</b> "
"<p>Bruk verktøyet på fanen <b>Elementer</b> for å legge til, endre eller slette "
"elementer i listevisningen. Endre oppsett for kolonner i listevisningen med "
"verktøyet på fanen <b>Kolonner</b>. </p> Trykk på knappen <b>Nytt element</b> "
"for å lage et nytt element, tast så inn tekst og velg en pixmap.</p> "
"<p>Velg et element fra lista og trykk på knappen <b>Slett element</b> "
"for å fjerne elementet fra lista.</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 68
#: kdevdesigner/designer/listvieweditorimpl.cpp:631 rc.cpp:5766
#, no-c-format
msgid "&Items"
msgstr "&Elementer"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 91
#: rc.cpp:5775
#, no-c-format
msgid "<b>Deletes the selected item.</b><p>Any sub-items are also deleted.</p>"
msgstr ""
"<b>Sletter det valgte elementet.</b>"
"<p>Hvis det finnes under-elementer blir de også slettet.</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 107
#: rc.cpp:5778
#, no-c-format
msgid "Item Properties"
msgstr "Elementegenskaper"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 124
#: rc.cpp:5781
#, no-c-format
msgid "Pi&xmap:"
msgstr "Pi&xmap:"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 155
#: rc.cpp:5790
#, no-c-format
msgid ""
"<b>Change the text of the item.</b>"
"<p>The text will be changed in the current column of the selected item.</p>"
msgstr ""
"<b>Endre elementets tekst.</b> "
"<p>Teksten blir endret i gjeldende kolonne for det valgte elementet.</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 163
#: rc.cpp:5793
#, no-c-format
msgid "Change column"
msgstr "Endre kolonne"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 166
#: rc.cpp:5796
#, no-c-format
msgid ""
"<b>Select the current column.</b>"
"<p>The item's text and pixmap will be changed for the current column</p>"
msgstr ""
"<b>Velg gjeldende kolonne.</b> "
"<p>Elementets tekst og pixmap blir endret for gjeldende kolonne.</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 174
#: rc.cpp:5799
#, no-c-format
msgid "Colu&mn:"
msgstr "Kolo&nne:"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 260
#: rc.cpp:5826
#, no-c-format
msgid ""
"<b>Adds a new item to the list.</b>"
"<p>The item will be inserted at the top of the list and can be moved using the "
"up- and down-buttons.</p>"
msgstr ""
"<b>Legger til et nytt element i lista.</b> "
"<p>Elementet blir satt inn øverst i lista og kan flyttes med opp- og "
"ned-knappene.</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 276
#: rc.cpp:5832
#, no-c-format
msgid "New &Subitem"
msgstr "Nytt &underelement"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 279
#: rc.cpp:5835
#, no-c-format
msgid "Add a subitem"
msgstr "Legg til et underelement"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 282
#: rc.cpp:5838
#, no-c-format
msgid ""
"<b>Create a new sub-item for the selected item.</b>"
"<p>New sub-items are inserted at the top of the list of sub-items, and new "
"levels are created automatically.</p>"
msgstr ""
"<b>Opprett et nytt underelement for det valgte elementet.</b> "
"<p>Nye underelementer settes inn øverst i lista over underelementer, og nye "
"nivåer lages automatisk.</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 316
#: rc.cpp:5844
#, no-c-format
msgid ""
"<b>Move the selected item up.</b>"
"<p>The item will be moved within its level in the hierarchy.</p>"
msgstr ""
"<b>Flytt det valgte elementet opp.</b> "
"<p>Elementet vil bli flyttet innen sitt nivå i hierarkiet.</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 333
#: rc.cpp:5850
#, no-c-format
msgid ""
"<b>Move the selected item down.</b>"
"<p>The item will be moved within its level in the hierarchy.</p>"
msgstr ""
"<b>Flytt det valgte elementet ned.</b> "
"<p>Elementet vil bli flyttet innen sitt nivå i hierarkiet.</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 347
#: rc.cpp:5853
#, no-c-format
msgid "Move left"
msgstr "Flytt til venstre"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 350
#: rc.cpp:5856
#, no-c-format
msgid ""
"<b>Move the selected item one level up.</b>"
"<p>This will also change the level of the item's sub-items.</p>"
msgstr ""
"<b>Flytt det valgte elementet ett nivå opp.</b> "
"<p>Dette endrer også nivået i hierarkiet for elementets underelementer.</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 364
#: rc.cpp:5859
#, no-c-format
msgid "Move right"
msgstr "Flytt til høyre"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 367
#: rc.cpp:5862
#, no-c-format
msgid ""
"<b>Move the selected item one level down.</b>"
"<p>This will also change the level of the item's sub-items.</p>"
msgstr ""
"<b>Flytt det valgte elementet ett nivå ned.</b> "
"<p>Dette endrer også nivået i hierarkiet for elementets underelementer..</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 394
#: rc.cpp:5868
#, no-c-format
msgid "Column Properties"
msgstr "Kolonneegenskaper"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 445
#: rc.cpp:5880
#, no-c-format
msgid "Delete the pixmap of the selected column."
msgstr "Slett pixmapen for den valgte kolonnen."
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 465
#: rc.cpp:5889
#, no-c-format
msgid ""
"<b>Select a pixmap file for the selected column.</b>"
"<p>The pixmap will be displayed in the header of the listview.</p>"
msgstr ""
"<b>Velg en pixmap-fil for den valgte kolonnen.</b> "
"<p>Pixmapen vil bli vist i overskrifta til listevisningen.</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 490
#: rc.cpp:5895
#, no-c-format
msgid "Enter column text"
msgstr "Tast inn kolonnetekst"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 493
#: rc.cpp:5898
#, no-c-format
msgid ""
"<b>Enter the text for the selected column.</b>"
"<p>The text will be displayed in the header of the listview.</p>"
msgstr ""
"<b>Tast inn teksten for den valgte kolonnen.</b> "
"<p>Teksten vil bli vist i overskrifta til listevisningen.</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 501
#: rc.cpp:5901
#, no-c-format
msgid "Clicka&ble"
msgstr "Trykk&bar"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 504
#: rc.cpp:5904
#, no-c-format
msgid ""
"If this option is checked, the selected column will react to mouse clicks on "
"the header."
msgstr ""
"Hvis dette er på vil den valgte kolonnen reagere på museklikk på overskriften."
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 512
#: rc.cpp:5907
#, no-c-format
msgid "Re&sizable"
msgstr "Kan endre &størrelse"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 515
#: rc.cpp:5910
#, no-c-format
msgid "The column's width will be resizable if this option is checked."
msgstr "Kolonnebredden kan endres hvis dette er på."
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 528
#: rc.cpp:5916
#, no-c-format
msgid "Delete column"
msgstr "Slett kolonne"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 531
#: rc.cpp:5919
#, no-c-format
msgid "Deletes the selected Column."
msgstr "Sletter den valgte kolonnen."
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 548
#: rc.cpp:5925
#, no-c-format
msgid ""
"<b>Move the selected item down.</b>"
"<p>The top-most column will be the first column in the list.</p>"
msgstr ""
"<b>Flytt det valgte elementet ned.</b> "
"<p>Den øverste kolonnen blir det første kolonnen i lista.</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 559
#: rc.cpp:5931
#, no-c-format
msgid "Add a Column"
msgstr "Legg til en kolonne"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 562
#: rc.cpp:5934
#, no-c-format
msgid ""
"<b>Create a new column.</b>"
"<p>New columns are appended at the end of (right of) the list and may be moved "
"using the up- and down-buttons.</p>"
msgstr ""
"<b>Opprett en ny kolonne.</b> "
"<p>Nye kolonner blir lagt til på slutten av (til høyre i) lista og kan flyttes "
"med opp- og ned-kmnappene.</p>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 579
#: rc.cpp:5940
#, no-c-format
msgid ""
"<b>Move the selected item up.</b>"
"<p>The top-most column will be the first column in the list.</p>"
msgstr ""
"<b>Flytt det valgte elementet opp.</b> "
"<p>Den øverste kolonnen blir den første kolonnen i lista.</b>"
#. i18n: file ./kdevdesigner/designer/listvieweditor.ui line 587
#: rc.cpp:5943
#, no-c-format
msgid "The list of columns."
msgstr "Kolonnelista."
#. i18n: file ./kdevdesigner/designer/previewwidget.ui line 47
#: rc.cpp:5967
#, no-c-format
msgid "Preview Window"
msgstr "Forhåndsvisnings-vindu"
#. i18n: file ./kdevdesigner/designer/previewwidget.ui line 92
#: rc.cpp:5970
#, no-c-format
msgid "ButtonGroup"
msgstr "Knappegruppe"
#. i18n: file ./kdevdesigner/designer/previewwidget.ui line 109
#: rc.cpp:5973
#, no-c-format
msgid "RadioButton1"
msgstr "Radioknapp1"
#. i18n: file ./kdevdesigner/designer/previewwidget.ui line 120
#: rc.cpp:5976
#, no-c-format
msgid "RadioButton2"
msgstr "Radioknapp2"
#. i18n: file ./kdevdesigner/designer/previewwidget.ui line 128
#: rc.cpp:5979
#, no-c-format
msgid "RadioButton3"
msgstr "Radioknapp3"
#. i18n: file ./kdevdesigner/designer/previewwidget.ui line 138
#: rc.cpp:5982
#, no-c-format
msgid "ButtonGroup2"
msgstr "Knappegruppe2"
#. i18n: file ./kdevdesigner/designer/previewwidget.ui line 155
#: rc.cpp:5985
#, no-c-format
msgid "CheckBox1"
msgstr "Avkryssingsboks1"
#. i18n: file ./kdevdesigner/designer/previewwidget.ui line 166
#: rc.cpp:5988
#, no-c-format
msgid "CheckBox2"
msgstr "Avkryssingsboks2"
#. i18n: file ./kdevdesigner/designer/previewwidget.ui line 200
#: rc.cpp:5991
#, no-c-format
msgid "LineEdit"
msgstr "Tekstlinje"
#. i18n: file ./kdevdesigner/designer/previewwidget.ui line 206
#: rc.cpp:5994
#, no-c-format
msgid "ComboBox"
msgstr "Flervalgsboks"
#. i18n: file ./kdevdesigner/designer/previewwidget.ui line 237
#: rc.cpp:5997
#, no-c-format
msgid "PushButton"
msgstr "Trykk-knapp"
#. i18n: file ./kdevdesigner/designer/previewwidget.ui line 274
#: rc.cpp:6000
#, no-c-format
msgid ""
"<p>\n"
"<a href=\"http://www.trolltech.com/\">http://www.trolltech.com</a>\n"
"</p>\n"
"<p>\n"
"<a href=\"http://www.kde.org/\">http://www.kde.org</a>\n"
"</p>"
msgstr ""
"<p>\n"
"<a href=\"http://www.trolltech.com/\">http://www.trolltech.com</a>\n"
"</p>\n"
"<p>\n"
"<a href=\"http://www.kde.org/\">http://www.kde.org</a>\n"
"</p>"
#. i18n: file ./kdevdesigner/designer/startdialog.ui line 49
#: rc.cpp:6008
#, no-c-format
msgid "Qt Designer - New/Open"
msgstr "Qt Designer Ny/Åpne"
#. i18n: file ./kdevdesigner/designer/startdialog.ui line 73
#: rc.cpp:6011
#, no-c-format
msgid "&New File/Project"
msgstr "&Ny fil/prosjekt"
#. i18n: file ./kdevdesigner/designer/startdialog.ui line 106
#: rc.cpp:6014
#, no-c-format
msgid "&Open File/Project"
msgstr "Å&pne prosjekt"
#. i18n: file ./kdevdesigner/designer/startdialog.ui line 125
#: rc.cpp:6017
#, no-c-format
msgid "&Recently Opened"
msgstr "Ny&lig åpnede"
#. i18n: file ./kdevdesigner/designer/startdialog.ui line 178
#: rc.cpp:6020
#, no-c-format
msgid "&Do not show this dialog in the future"
msgstr "&Ikke vis denne dialogen senere"
#. i18n: file ./kdevdesigner/designer/pixmapcollectioneditor.ui line 41
#: rc.cpp:6032
#, no-c-format
msgid "Manage Image Collection"
msgstr "Håndtere bildesamling"
#. i18n: file ./kdevdesigner/designer/pixmapcollectioneditor.ui line 135
#: rc.cpp:6047
#, no-c-format
msgid "C&lose"
msgstr "&Lukk"
#. i18n: file ./src/settingswidget.ui line 16
#: rc.cpp:6050
#, fuzzy, no-c-format
msgid "Form2"
msgstr "Skjemaer"
#. i18n: file ./src/settingswidget.ui line 30
#: rc.cpp:6053
#, no-c-format
msgid "Lo&ad last project on startup"
msgstr "L&ast inn siste prosjekt ved oppstart"
#. i18n: file ./src/settingswidget.ui line 33
#: rc.cpp:6056
#, fuzzy, no-c-format
msgid ""
"Check this if you want TDevelop to load the last opened project on startup"
msgstr ""
"Kryss av her hvis du vil at KDevelop skal laste inn det sist lagrede prosjektet "
"ved oppstart."
#. i18n: file ./src/settingswidget.ui line 36
#: rc.cpp:6059
#, fuzzy, no-c-format
msgid ""
"Mark this checkbox if you want to continue to work with the last project you "
"worked on. This will cause TDevelop to automatically load this project on "
"start-up. It will usually be shown in the state you left work so you can "
"readily proceed."
msgstr ""
"Kryss av her hvis du vil fortsette å arbeide med det siste prosjektet du "
"arbeidet med. Dette gjør at KDevelop laster inn dette prosjektet automatisk ved "
"oppstart. Som regel blir det vist i samme tilstand som da du avsluttet, slik at "
"du kan greit komme videre."
#. i18n: file ./src/settingswidget.ui line 44
#: rc.cpp:6062
#, no-c-format
msgid "<qt><h3>Project Settings</h3></qt>"
msgstr "<qt><h3>Prosjektinnstillinger</h3></qt>"
#. i18n: file ./src/settingswidget.ui line 55
#: rc.cpp:6065
#, fuzzy, no-c-format
msgid "Line wrappin&g"
msgstr "Linje&brytning"
#. i18n: file ./src/settingswidget.ui line 58
#: rc.cpp:6068
#, fuzzy, no-c-format
msgid ""
"By default, TDevelop will wrap long lines around in the Messages Output View "
"window"
msgstr "Standard er at KDevelop bryter lange linjer i vinduet for meldinger."
#. i18n: file ./src/settingswidget.ui line 61
#: rc.cpp:6071
#, fuzzy, no-c-format
msgid ""
"By default, TDevelop will wrap long lines around in the Messages Output View "
"window so that valuable information will not be easily overlooked. In some "
"cases this will clutter long message lists. Remove the checkbox mark if you do "
"not want the lines wrap around."
msgstr ""
"Standard er et KDevelop bryter lange linjer i vinduet for meldingsutskrift, "
"slik at verdifull informasjon ikke lett blir oversett. I noen tilfeller kan "
"dette lage støy i lange meldingslister. Ta bort merket hvis du vil at lange "
"linjer ikke skal brytes og fortsette på neste linje."
#. i18n: file ./src/settingswidget.ui line 77
#: rc.cpp:6074
#, no-c-format
msgid "&Compiler output:"
msgstr "Utdata fra &kompilator:"
#. i18n: file ./src/settingswidget.ui line 86
#: rc.cpp:6077
#, no-c-format
msgid "Very Short"
msgstr "Svært kort"
#. i18n: file ./src/settingswidget.ui line 91
#: rc.cpp:6080
#, no-c-format
msgid "Short"
msgstr "Kort"
#. i18n: file ./src/settingswidget.ui line 96
#: rc.cpp:6083
#, no-c-format
msgid "Long"
msgstr "Lang"
#. i18n: file ./src/settingswidget.ui line 111
#: rc.cpp:6086
#, no-c-format
msgid "Choose what sort of output you want from the build process"
msgstr "Velg hva slags utdata du vil ha fra byggeprosessen"
#. i18n: file ./src/settingswidget.ui line 117
#: rc.cpp:6089
#, fuzzy, no-c-format
msgid ""
"TDevelop preprocesses the messages the Messages Output View window receives "
"during the build processes in order to filter superfluous information. You can "
"control the level of detail TDevelop will display using the dropdown box in "
"this field. \n"
"<b>Very Short</b> Displays only warnings, errors, and the filenames which are "
"compiled. \n"
"<b>Short</b> Suppresses all compiler flags and formats the output to be more "
"readable. \n"
"<b>Full</b> Displays all output messages unmodified."
msgstr ""
"KDevelop bearbeider meldingene som vinduet for meldingsutskrifter mottar i "
"løpet av byggeprosessen for å filtrere ut overflødig informasjon. Du kan styre "
"detaljnivået som KDevelop viser, med nedtrekksboksen i dette feltet.\n"
"<b>Svært kort</b> Viser bare advarsler, feilmeldinger og navn på filer som "
"kompileres.\n"
"<b>Kort</v> Sløyfer alle kompilatorparametre og formaterer utdata for å bedre "
"leseligheten.\n"
"<b>Full</b> Vis all utdata uten endring."
#. i18n: file ./src/settingswidget.ui line 127
#: rc.cpp:6095
#, no-c-format
msgid "<qt><h3>Output View Settings</h3></qt>"
msgstr "<qt><h3>Innstillinger for utdata-visning</h3></qt>"
#. i18n: file ./src/settingswidget.ui line 149
#: rc.cpp:6098
#, no-c-format
msgid "Default pro&jects directory:"
msgstr "Standard pros&jektmappe:"
#. i18n: file ./src/settingswidget.ui line 163
#: rc.cpp:6101
#, no-c-format
msgid "Set the directory where you want your projects in."
msgstr "Oppgi hvilken mappe du vil ha prosjektene i."
#. i18n: file ./src/settingswidget.ui line 166
#: rc.cpp:6104
#, fuzzy, no-c-format
msgid ""
"By default, TDevelop uses a common parent directory for all new projects. Enter "
"the absolute path of this common directory in the box or select it from your "
"directory structure. TDevelop will place the any new project here as a "
"subdirectory."
msgstr ""
"Som standard bruker KDevelop en felles mappe for alle nye prosjekter. Oppgi "
"absolutt sti til denne fellesmappa i tekstfeltet eller velg den fra "
"mappestrukturen. KDevelop plasserer ethvert nytt prosjekt her som en "
"undermappe."
#. i18n: file ./src/settingswidget.ui line 209
#: rc.cpp:6107
#, no-c-format
msgid "Window &font:"
msgstr "Skrift &for vinduet:"
#. i18n: file ./src/settingswidget.ui line 261
#: rc.cpp:6110
#, no-c-format
msgid "Use &TDE setting"
msgstr "Bruk &TDE-innstilling"
#. i18n: file ./src/settingswidget.ui line 267
#: rc.cpp:6113
#, no-c-format
msgid "Use the terminal as set in KControl"
msgstr "Bruk terminalen som er oppgitt i KControl"
#. i18n: file ./src/settingswidget.ui line 270
#: rc.cpp:6116
#, fuzzy, no-c-format
msgid ""
"If checked, TDevelop will use the default terminal as set in KControl in TDE "
"components, Component Chooser."
msgstr ""
"Hvis dette er krysset av bruker KDevelop standardterminalen slik det er satt i "
"KControl i TDE-komponenter, Komponentvelger."
#. i18n: file ./src/settingswidget.ui line 294
#: rc.cpp:6119
#, no-c-format
msgid "&Other:"
msgstr "&Annet:"
#. i18n: file ./src/settingswidget.ui line 297
#: rc.cpp:6122
#, no-c-format
msgid "Set a different terminal than the TDE default one"
msgstr "Angi en annen terminal enn TDEs standardterminal"
#. i18n: file ./src/settingswidget.ui line 300
#: rc.cpp:6125
#, no-c-format
msgid "Choose some other terminal different from the default one."
msgstr "Velg en annen terminal, som ikke er standardterminalen."
#. i18n: file ./src/settingswidget.ui line 320
#: rc.cpp:6128
#, no-c-format
msgid "<qt><h3>Terminal Emulation</h3></qt>"
msgstr "<qt><h3>Terminal-emulering</h3></qt>"
#. i18n: file ./src/settingswidget.ui line 365
#: rc.cpp:6131
#, no-c-format
msgid ""
"<qt>"
"<h3>UI Designer Integration</h3>This will only be used when no project is "
"opened. For the project specific setting see Project Options/C++ Specific and "
"open the Qt tab.</qt>"
msgstr ""
#. i18n: file ./src/settingswidget.ui line 396
#: rc.cpp:6134 rc.cpp:7214
#, fuzzy, no-c-format
msgid "&Use TDevelop's embedded designer"
msgstr "Br&uk KDevelops innebygde konstruktør"
#. i18n: file ./src/settingswidget.ui line 399
#: rc.cpp:6137
#, fuzzy, no-c-format
msgid "Start TDevelop own designer embedded within TDevelop"
msgstr "Start KDevelops egen brukerflate-bygger innebygget i KDevelop"
#. i18n: file ./src/settingswidget.ui line 402
#: rc.cpp:6140 rc.cpp:7220
#, fuzzy, no-c-format
msgid ""
"TDevelop comes with its own UI designer that can either be embedded or be run "
"as a separate program. Check this button if you wish to integrate the UI "
"designer into TDevelop."
msgstr ""
"KDevelop har sin egen brukerflate-bygger som enten kan legges inn i KDevelop "
"eller kjøres som et frittstående program. Kryss av her om du vil integrere "
"brukerflate-byggeren i KDevelop."
#. i18n: file ./src/settingswidget.ui line 410
#: rc.cpp:6143
#, fuzzy, no-c-format
msgid "Run TDevelop's &designer as a separate application"
msgstr "Kjør KDevelops &brukerflate-bygger som et frittstående program"
#. i18n: file ./src/settingswidget.ui line 413
#: rc.cpp:6146
#, fuzzy, no-c-format
msgid "Start TDevelop own designer externally"
msgstr "Start KDevelops egen bygger eksternt"
#. i18n: file ./src/settingswidget.ui line 416
#: rc.cpp:6149 rc.cpp:7229
#, fuzzy, no-c-format
msgid ""
"TDevelop comes with its own UI designer that can either be embedded or be run "
"as a separate program. Check this button if you wish to run TDevelop's UI "
"designer as a separate program."
msgstr ""
"KDevelop har sin egen brukerflate-bygger som enten kan legges inn i KDevelop "
"eller kjøres som et frittstående program. Kryss av her om du vil "
"kjørebrukerflate-byggeren som et frittstående program."
#. i18n: file ./src/settingswidget.ui line 424
#: rc.cpp:6152
#, fuzzy, no-c-format
msgid "Run &Qt Designer"
msgstr "Kjør Qt Desi&gner"
#. i18n: file ./src/settingswidget.ui line 427
#: rc.cpp:6155 rc.cpp:7235
#, no-c-format
msgid "Use Qt Designer externally"
msgstr "Bruk Qt Designer eksternt"
#. i18n: file ./src/settingswidget.ui line 430
#: rc.cpp:6158 rc.cpp:7238
#, fuzzy, no-c-format
msgid ""
"Check this button if you wish to use Qt Designer rather than TDevelop's "
"integrated designer."
msgstr ""
"Kryss av her om du vil kjøre Qt Designer i stedet for KDevelops innebygde "
"brukerflate-bygger."
#. i18n: file ./src/settingswidget.ui line 440
#: rc.cpp:6161
#, no-c-format
msgid "Directory &navigation messages"
msgstr "Meldinger om mappe&navigasjon"
#. i18n: file ./src/settingswidget.ui line 443
#: rc.cpp:6164 rc.cpp:7479
#, fuzzy, no-c-format
msgid "Alt+N"
msgstr "Alt + 1"
#. i18n: file ./src/settingswidget.ui line 446
#: rc.cpp:6167
#, no-c-format
msgid "Check this if you want to know what directory make is in"
msgstr "Kryss av her om du vil vite hvilken mappe «make» er i"
#. i18n: file ./src/settingswidget.ui line 449
#: rc.cpp:6170
#, fuzzy, no-c-format
msgid ""
"The make tool usually will display messages like “Entering directory”, or "
"“Leaving directory” when it switches the directories it currently works in. As "
"this clutters the messages list in the Messages Output View window, TDevelop "
"suppresses those messages by default. Mark the checkbox if you want to protocol "
"which directories make worked in."
msgstr ""
"make-verktøyet viser vanligvis slike meldinger som «Entering directory» eller "
"«Leaving directory» når det bytter arbeidsmappe. Siden dette kan lage støy i "
"meldingslista i vinduet for meldingsutskrifter, så er standard for KDevelop at "
"slike meldinger ikke vises. Sett merke her om du vil ha protokollført i hvilke "
"mapper «make» arbeidet."
#. i18n: file ./src/settingswidget.ui line 497
#: rc.cpp:6173
#, fuzzy, no-c-format
msgid "Force English compiler output"
msgstr "Full utdata fra kompilator"
#. i18n: file ./src/settingswidget.ui line 505
#: rc.cpp:6176
#, no-c-format
msgid "Use kde language and disable \"jump-to-source\" functionality"
msgstr ""
#. i18n: file ./src/pluginselectdialogbase.ui line 16
#: rc.cpp:6179
#, fuzzy, no-c-format
msgid "Plugin Selection"
msgstr "Handling for &tilleggsmodul"
#. i18n: file ./src/pluginselectdialogbase.ui line 27
#: rc.cpp:6182
#, fuzzy, no-c-format
msgid "Plugins:"
msgstr "Programtillegg"
#. i18n: file ./src/pluginselectdialogbase.ui line 51
#: rc.cpp:6185
#, no-c-format
msgid "Make this the default for this profile:"
msgstr ""
#. i18n: file ./src/pluginselectdialogbase.ui line 59
#: rc.cpp:6188
#, fuzzy, no-c-format
msgid "Save &as Default"
msgstr "Velg som standard"
#. i18n: file ./src/generalinfowidgetbase.ui line 16
#: rc.cpp:6200
#, no-c-format
msgid "General Settings"
msgstr "Generelle innstillinger"
#. i18n: file ./src/generalinfowidgetbase.ui line 25
#: rc.cpp:6203
#, no-c-format
msgid "Absolute Path"
msgstr "Absolutt sti"
#. i18n: file ./src/generalinfowidgetbase.ui line 30
#: rc.cpp:6206
#, no-c-format
msgid "Relative to Project File"
msgstr "Relativ til prosjektfila"
#. i18n: file ./src/generalinfowidgetbase.ui line 67
#: rc.cpp:6212
#, no-c-format
msgid "Project directory:"
msgstr "Prosjektmappe:"
#. i18n: file ./src/generalinfowidgetbase.ui line 115
#: rc.cpp:6224
#, no-c-format
msgid ""
"Project Version\n"
"You may need to run automake & friends to update\n"
"the version in all files after changing this."
msgstr ""
#. i18n: file ./src/generalinfowidgetbase.ui line 124
#: rc.cpp:6229
#, no-c-format
msgid ""
"Used in templates as $EMAIL$\n"
"Placed in the AUTHORS file"
msgstr ""
#. i18n: file ./src/generalinfowidgetbase.ui line 133
#: rc.cpp:6233
#, no-c-format
msgid ""
"Used in templates as $AUTHOR$\n"
"Placed in the AUTHORS file"
msgstr ""
#. i18n: file ./src/generalinfowidgetbase.ui line 177
#: rc.cpp:6237
#, no-c-format
msgid "Where the project starts."
msgstr ""
#. i18n: file ./src/generalinfowidgetbase.ui line 189
#: rc.cpp:6240
#, no-c-format
msgid "Please select a project directory"
msgstr "Velg en prosjektmappe"
#. i18n: file ./src/generalinfowidgetbase.ui line 197
#: rc.cpp:6243
#, fuzzy, no-c-format
msgid "Default encoding:"
msgstr "Stan&dard mellomrom:"
#. i18n: file ./src/generalinfowidgetbase.ui line 205
#: rc.cpp:6246
#, no-c-format
msgid "Default encoding used when opening text files"
msgstr ""
#. i18n: file ./src/generalinfowidgetbase.ui line 213
#: rc.cpp:6249
#, fuzzy, no-c-format
msgid "Text that stays in the project file."
msgstr "Kan ikke skrive til prosjektfila."
#. i18n: file ./src/mimewarningdialog.ui line 24
#: rc.cpp:6252
#, no-c-format
msgid "Could Not Open File"
msgstr "Kunne ikke åpne fila"
#. i18n: file ./src/mimewarningdialog.ui line 43
#: rc.cpp:6255
#, fuzzy, no-c-format
msgid "TDevelop could not open"
msgstr "KDevelop klarte ikke å åpne"
#. i18n: file ./src/mimewarningdialog.ui line 59
#: rc.cpp:6258
#, no-c-format
msgid "Some URL"
msgstr "En URL"
#. i18n: file ./src/mimewarningdialog.ui line 75
#: rc.cpp:6261
#, no-c-format
msgid "<qt>No suitable viewer was found for the <b>%1</b> mimetype.</qt>"
msgstr "<qt>Fant ingen passende fremviser for mimetypen <b>%1</b>.</qt>"
#. i18n: file ./src/mimewarningdialog.ui line 100
#: rc.cpp:6264
#, no-c-format
msgid "What Do You Want to Do?"
msgstr "Hva vil du gjøre?"
#. i18n: file ./src/mimewarningdialog.ui line 111
#: rc.cpp:6267
#, no-c-format
msgid "Let TDE find a suitable program"
msgstr "La TDE finne et passende program"
#. i18n: file ./src/mimewarningdialog.ui line 122
#: rc.cpp:6270
#, fuzzy, no-c-format
msgid "Open it in TDevelop as plain text"
msgstr "Åpne det i KDevelop som ren tekst"
#. i18n: file ./src/mimewarningdialog.ui line 158
#: rc.cpp:6273
#, no-c-format
msgid "Always open this mimetype as text"
msgstr "Alltid åpne denne mimetypen som tekst"
#. i18n: file ./src/profileengine/editor/profileeditorbase.ui line 16
#: rc.cpp:6282
#, fuzzy, no-c-format
msgid "Profile Editor for The TDevelop Platform"
msgstr "Profilredigering for KDevelop-systemet"
#. i18n: file ./src/profileengine/editor/profileeditorbase.ui line 63
#: src/profileengine/editor/profileeditor.cpp:237 rc.cpp:6285 rc.cpp:6360
#, no-c-format
msgid "Add Profile"
msgstr "Legg til profil"
#. i18n: file ./src/profileengine/editor/profileeditorbase.ui line 132
#: src/profileengine/editor/profileeditor.cpp:255
#: src/profileengine/editor/profileeditor.cpp:267 rc.cpp:6294
#, no-c-format
msgid "Remove Profile"
msgstr "Fjern profil"
#. i18n: file ./src/profileengine/editor/profileeditorbase.ui line 212
#: rc.cpp:6306
#, no-c-format
msgid "Derived properties:"
msgstr "Avledede egenskaper:"
#. i18n: file ./src/profileengine/editor/profileeditorbase.ui line 241
#: rc.cpp:6309
#, no-c-format
msgid "Own properties:"
msgstr "Egne egenskaper:"
#. i18n: file ./src/profileengine/editor/profileeditorbase.ui line 258
#: rc.cpp:6312
#, no-c-format
msgid "Lists of Explicitly Enabled && Disabled Plugins"
msgstr "Lister over tilleggsmoduler som er uttrykkelig slått på/av"
#. i18n: file ./src/profileengine/editor/profileeditorbase.ui line 283
#: rc.cpp:6315
#, no-c-format
msgid "Enabled:"
msgstr "Slått på:"
#. i18n: file ./src/profileengine/editor/profileeditorbase.ui line 289
#: rc.cpp:6318 rc.cpp:6324
#, no-c-format
msgid "Plugin Name"
msgstr "Navn på tilleggsmodul"
#. i18n: file ./src/profileengine/editor/profileeditorbase.ui line 323
#: rc.cpp:6321
#, no-c-format
msgid "Disabled:"
msgstr "Slått av:"
#. i18n: file ./src/profileengine/editor/profileeditorbase.ui line 430
#: rc.cpp:6333
#, no-c-format
msgid "Available plugins:"
msgstr "Tilgjengelige tilleggsmoduler:"
#. i18n: file ./src/profileengine/editor/profileeditorbase.ui line 447
#: rc.cpp:6339 rc.cpp:6354
#, no-c-format
msgid "Generic Name"
msgstr "Generisk navn"
#. i18n: file ./src/profileengine/editor/profileeditorbase.ui line 507
#: rc.cpp:6348
#, no-c-format
msgid "List of Plugins to Be Loaded"
msgstr "Liste over tilleggsmoduler som skal lastes inn"
#. i18n: file ./src/profileengine/editor/addprofilewidget.ui line 73
#: rc.cpp:6366
#, no-c-format
msgid "&Generic name:"
msgstr "&Generisk navn:"
#. i18n: file ./languages/cpp/configproblemreporter.ui line 24
#: languages/cpp/cppsupportpart.cpp:585 rc.cpp:6372
#, no-c-format
msgid "Problem Reporter"
msgstr "Problemrapportør"
#. i18n: file ./languages/cpp/configproblemreporter.ui line 28
#: rc.cpp:6375
#, no-c-format
msgid ""
"If enabled, the C++ parser will report any syntax errors it detects. \n"
"They will be displayed in the 'Problems' output view and as markers in the "
"editor."
msgstr ""
#. i18n: file ./languages/cpp/configproblemreporter.ui line 39
#: rc.cpp:6379
#, fuzzy, no-c-format
msgid "&Use Problem Reporter"
msgstr "Problemrapportør"
#. i18n: file ./languages/cpp/configproblemreporter.ui line 52
#: rc.cpp:6382
#, no-c-format
msgid "Parsing"
msgstr "Tolker"
#. i18n: file ./languages/cpp/configproblemreporter.ui line 57
#: rc.cpp:6385
#, no-c-format
msgid ""
"If enabled, the C++ parser will run on the active file after the stated "
"timeout, after there has been any changes to the text.\n"
"\n"
"If disabled, the parser will typically only run when the file is saved."
msgstr ""
#. i18n: file ./languages/cpp/configproblemreporter.ui line 76
#: rc.cpp:6390
#, fuzzy, no-c-format
msgid "Enable &background parsing"
msgstr "&Slå på tolking i bakgrunn"
#. i18n: file ./languages/cpp/configproblemreporter.ui line 92
#: rc.cpp:6393 rc.cpp:6877 rc.cpp:6938 rc.cpp:8197
#, no-c-format
msgid "msec"
msgstr "ms"
#. i18n: file ./languages/cpp/configproblemreporter.ui line 133
#: rc.cpp:6396
#, no-c-format
msgid "Special &Headers"
msgstr "Spesielle &hoder"
#. i18n: file ./languages/cpp/configproblemreporter.ui line 136
#: rc.cpp:6399
#, no-c-format
msgid ""
"Often a macro that the C++ parser must understand in order to correctly parse a "
"piece of code is defined somewhere in a non-standard header file that the "
"parser does not look at. This textbox can be used to define those macros "
"locally so that the C++ parser can understand them."
msgstr ""
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 16
#: rc.cpp:6402 rc.cpp:8010
#, no-c-format
msgid "New Class"
msgstr "Ny klasse"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 34
#: rc.cpp:6405
#, no-c-format
msgid "Class &Information"
msgstr "Klasse&informasjon"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 73
#: rc.cpp:6408
#, no-c-format
msgid "Docu&mentation:"
msgstr "Doku&mentasjon:"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 87
#: rc.cpp:6411
#, no-c-format
msgid ""
"Insert a short description for your new class\n"
"here for documentation purposes. This can be used\n"
"to create API documentation in HTML format with\n"
"doxygen or similar tools."
msgstr ""
"Skriv inn en kort beskrivelse av din nye klasse\n"
"her for dokumentasjonsformål. Dette vil bli brukt til\n"
"API-dokumentasjon i HTML-format med doxygen\n"
"eller liknende verktøy."
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 97
#: rc.cpp:6417
#, no-c-format
msgid "File Names"
msgstr "Filnavn"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 108
#: rc.cpp:6420
#, no-c-format
msgid "&Header:"
msgstr "&Filhode:"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 122
#: rc.cpp:6423
#, no-c-format
msgid ""
"Insert your header file name here.\n"
"It is automatically inserted while\n"
"you select the classname, but you can\n"
"still edit it afterwards."
msgstr ""
"Sett inn filnavnet til hodet her.\n"
"Det vil automatisk bli satt inn når\n"
"du velger et klassenavn, men du\n"
"kan fortsatt redigere det etterpå."
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 130
#: rc.cpp:6429
#, no-c-format
msgid "Im&plementation:"
msgstr "Im&plementasjon:"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 144
#: rc.cpp:6432
#, no-c-format
msgid ""
"Insert your implementation filename here.\n"
"It is automatically inserted while\n"
"you select the classname, but you can\n"
"still edit it afterwards."
msgstr ""
"Oppgi navnet på implementasjonsfila.\n"
"Navnet blir automatisk lagt inn når du\n"
"skriver klassenavnet, men du kan endre\n"
"det etterpå."
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 152
#: rc.cpp:6438
#, fuzzy, no-c-format
msgid "Create only header"
msgstr "Opprett element"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 162
#: kdevdesigner/designer/hierarchyview.cpp:191
#: parts/classview/classtreebase.cpp:51 rc.cpp:6441
#, no-c-format
msgid "Class"
msgstr "Klasse"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 194
#: rc.cpp:6447
#, no-c-format
msgid ""
"Insert your new classname here.\n"
"You can also define template classes by specifying\n"
"template <params> classname"
msgstr ""
"Sett inn navnet på den nye klassen her.\n"
"Du kan også lage malklasser ved å oppgi\n"
"template <parametre> klassenavn"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 210
#: rc.cpp:6452
#, no-c-format
msgid "Name&space:"
msgstr "Na&vneområde:"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 223
#: rc.cpp:6455
#, no-c-format
msgid ""
"Insert a name of the namespace here.\n"
"You can define nested namespaces by specifying\n"
"Namespace1::Namespace2::...::NamespaceN"
msgstr ""
"Sett inn et navn for navneområdet her.\n"
"Du kan angi navneområder inni hverandre med \n"
"Navnområde1::Navnområde2::…::NavnområdeN"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 233
#: rc.cpp:6460
#, no-c-format
msgid "Inheritance"
msgstr "Arv"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 349
#: rc.cpp:6475 rc.cpp:8022
#, no-c-format
msgid "&Base class:"
msgstr "&Basisklasse:"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 358
#: rc.cpp:6478
#, no-c-format
msgid "Baseclass Name"
msgstr "Basisklassenavn"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 369
#: rc.cpp:6481
#, no-c-format
msgid "Inheritance Type"
msgstr "Arvetype"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 416
#: rc.cpp:6484
#, no-c-format
msgid ""
"Insert the base class which your new class will be derived from. If you have "
"checked 'Generate QWidget child class' the new class will be derived from "
"QWidget. If no base class is named, the new class will not have a parent class. "
"You can also use template classes here (like BaseClass<int, int>)"
msgstr ""
"Oppgi hvilken baseklasse den nye klassen skal arve fra. Hvis du har krysset av "
"'lag subklasse av QWidget', så vil den nye klassen arve fra QWidget. Hvis du "
"ikke oppgir noen baseklasse, vi den nye klassen ikke ha noenforeldreklasse. Her "
"kan det også brukes mal-klasser (som Baseklasse<int, int>)"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 489
#: rc.cpp:6493
#, no-c-format
msgid "Virtual"
msgstr "Virtuell"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 500
#: rc.cpp:6496
#, no-c-format
msgid "Public"
msgstr "Offentlig"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 514
#: rc.cpp:6499
#, no-c-format
msgid "Protected"
msgstr "Protected"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 525
#: rc.cpp:6502
#, no-c-format
msgid "Private"
msgstr "Privat"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 548
#: rc.cpp:6508
#, no-c-format
msgid "Use file t&emplates"
msgstr "Bruk filmal&er"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 559
#: rc.cpp:6511
#, no-c-format
msgid "Generate QOb&ject child class"
msgstr "Lag en subklasse av QOb&jekt"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 567
#: rc.cpp:6514
#, no-c-format
msgid "Generate Q&Widget child class"
msgstr "Gnerer en subklasse av Q&Widget"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 575
#: rc.cpp:6517
#, no-c-format
msgid "Generate G&TK+ class"
msgstr "Lag en G&TK+-klasse"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 583
#: rc.cpp:6520
#, no-c-format
msgid "Use Objective-C"
msgstr "Bruk Objective-C"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 595
#: rc.cpp:6523
#, no-c-format
msgid "Ad&vanced Information"
msgstr "A&vansert informasjon"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 610
#: rc.cpp:6526
#, no-c-format
msgid "Constr&uctors"
msgstr "Konstr&uktører"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 619
#: rc.cpp:6529
#, no-c-format
msgid "Base Class Constructors"
msgstr "Baseklassekonstruktører"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 668
#: rc.cpp:6532
#, no-c-format
msgid "C&reate Constructor >>"
msgstr "Opp&rett konstruktør >>"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 690
#: rc.cpp:6535
#, no-c-format
msgid "C&lear Selection"
msgstr "&Tøm utvalg"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 721
#: rc.cpp:6538
#, no-c-format
msgid "&Header"
msgstr "&Filhode"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 756
#: rc.cpp:6541
#, no-c-format
msgid "&Source"
msgstr "&Kilde"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 794
#: rc.cpp:6544
#, no-c-format
msgid "Methods Ov&erriding"
msgstr "Metod&er som overstyrer"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 803
#: languages/cpp/cppnewclassdlg.cpp:851 languages/cpp/cppnewclassdlg.cpp:854
#: languages/cpp/cppnewclassdlg.cpp:1010 languages/cpp/cppnewclassdlg.cpp:1013
#: rc.cpp:6547
#, no-c-format
msgid "Methods"
msgstr "Metoder"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 814
#: rc.cpp:6550
#, no-c-format
msgid "Extend Functionality"
msgstr "Utvid funksjonalitet"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 849
#: rc.cpp:6553
#, no-c-format
msgid "&Access Control"
msgstr "Til&gangskontroll"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 858
#: rc.cpp:6556
#, no-c-format
msgid "Methods & Attributes"
msgstr "Metoder og attributter"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 869
#: rc.cpp:6559
#, no-c-format
msgid "Implied Modifier"
msgstr "Implisitt modifikator"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 880
#: rc.cpp:6562
#, no-c-format
msgid "New Modifier"
msgstr "Ny modifikator"
#. i18n: file ./languages/cpp/cppnewclassdlgbase.ui line 923
#: rc.cpp:6565
#, no-c-format
msgid "&Generation Options"
msgstr "&Opprettelsesflagg"
#. i18n: file ./languages/cpp/creategettersetter.ui line 44
#: rc.cpp:6574
#, no-c-format
msgid "&inline"
msgstr "&I teksten"
#. i18n: file ./languages/cpp/creategettersetter.ui line 50
#: rc.cpp:6577
#, no-c-format
msgid "create an inline get method"
msgstr "opprett en get-metode i teksten"
#. i18n: file ./languages/cpp/creategettersetter.ui line 53
#: rc.cpp:6580
#, no-c-format
msgid ""
"If this is checked the get method will be created inline; otherwise, it will "
"not."
msgstr "Hvis dette er på vil getter-metoden bli laget i teksten, ellers ikke."
#. i18n: file ./languages/cpp/creategettersetter.ui line 61
#: rc.cpp:6583
#, no-c-format
msgid "&get method"
msgstr "&get-metode"
#. i18n: file ./languages/cpp/creategettersetter.ui line 67
#: rc.cpp:6586
#, no-c-format
msgid "create get method"
msgstr "Opprett get-metode"
#. i18n: file ./languages/cpp/creategettersetter.ui line 70
#: rc.cpp:6589
#, no-c-format
msgid "If this is checked a getter method will be created."
msgstr "Hvis dette er krysset av blir det laget en getter-metode."
#. i18n: file ./languages/cpp/creategettersetter.ui line 78
#: rc.cpp:6592
#, no-c-format
msgid "&set method"
msgstr "&set-metode"
#. i18n: file ./languages/cpp/creategettersetter.ui line 84
#: rc.cpp:6595
#, no-c-format
msgid "create set method"
msgstr "Opprett set-metode"
#. i18n: file ./languages/cpp/creategettersetter.ui line 87
#: rc.cpp:6598
#, no-c-format
msgid "If this is checked a set method will be created"
msgstr "Hvis dette er krysset av blir det laget en setter-metode"
#. i18n: file ./languages/cpp/creategettersetter.ui line 95
#: rc.cpp:6601
#, no-c-format
msgid "name of the get method"
msgstr "Navn på get-metoden"
#. i18n: file ./languages/cpp/creategettersetter.ui line 98
#: rc.cpp:6604
#, no-c-format
msgid "The name of the created get method"
msgstr "Navn på den nyopprettede get-metoden"
#. i18n: file ./languages/cpp/creategettersetter.ui line 106
#: rc.cpp:6607
#, no-c-format
msgid "name of the set method"
msgstr "Navn på set-metoden"
#. i18n: file ./languages/cpp/creategettersetter.ui line 109
#: rc.cpp:6610
#, no-c-format
msgid "The name of the created set method"
msgstr "Navn på den nyopprettede set-metoden"
#. i18n: file ./languages/cpp/creategettersetter.ui line 117
#: rc.cpp:6613
#, no-c-format
msgid "i&nline"
msgstr "i &teksten"
#. i18n: file ./languages/cpp/creategettersetter.ui line 123
#: rc.cpp:6616
#, no-c-format
msgid "create an inline set method"
msgstr "opprett en set-metode i teksten"
#. i18n: file ./languages/cpp/creategettersetter.ui line 126
#: rc.cpp:6619
#, no-c-format
msgid ""
"If this is checked the set method will be created inline; otherwise, it will "
"not."
msgstr "Hvis dette er på vil setter-metoden bli laget i teksten, ellers ikke."
#. i18n: file ./languages/cpp/createpcsdialogbase.ui line 16
#: rc.cpp:6628
#, no-c-format
msgid "New Persistant Class Store"
msgstr "Nytt persistent klasselager"
#. i18n: file ./languages/cpp/createpcsdialogbase.ui line 23
#: rc.cpp:6631
#, fuzzy, no-c-format
msgid "Select importer"
msgstr "Velg mappe"
#. i18n: file ./languages/cpp/createpcsdialogbase.ui line 55
#: rc.cpp:6634
#, fuzzy, no-c-format
msgid "Select directory"
msgstr "Velg mappe"
#. i18n: file ./languages/cpp/createpcsdialogbase.ui line 63
#: rc.cpp:6637
#, fuzzy, no-c-format
msgid "Describe database contents"
msgstr "Skrivbare typede konstander"
#. i18n: file ./languages/cpp/createpcsdialogbase.ui line 74
#: rc.cpp:6640
#, fuzzy, no-c-format
msgid "Filename:"
msgstr "Filnavn:"
#. i18n: file ./languages/cpp/createpcsdialogbase.ui line 106
#: rc.cpp:6643
#, no-c-format
msgid "Creating..."
msgstr "Oppretter …"
#. i18n: file ./languages/cpp/addmethoddialogbase.ui line 16
#: rc.cpp:6646
#, no-c-format
msgid "Add Method"
msgstr "Legg til metode"
#. i18n: file ./languages/cpp/addmethoddialogbase.ui line 28
#: rc.cpp:6649
#, no-c-format
msgid "Inline"
msgstr "I teksten"
#. i18n: file ./languages/cpp/addmethoddialogbase.ui line 50
#: rc.cpp:6655 rc.cpp:6706
#, no-c-format
msgid "Storage"
msgstr "Lagring"
#. i18n: file ./languages/cpp/addmethoddialogbase.ui line 72
#: rc.cpp:6661 rc.cpp:6712
#, no-c-format
msgid "Declarator"
msgstr "Deklarator"
#. i18n: file ./languages/cpp/addmethoddialogbase.ui line 121
#: rc.cpp:6664
#, no-c-format
msgid "&Add Method"
msgstr "&Legg til metode"
#. i18n: file ./languages/cpp/addmethoddialogbase.ui line 129
#: rc.cpp:6667
#, no-c-format
msgid "&Delete Method"
msgstr "&Slett metode"
#. i18n: file ./languages/cpp/addmethoddialogbase.ui line 139
#: rc.cpp:6670
#, no-c-format
msgid "Method Properties"
msgstr "Metodeegenskaper"
#. i18n: file ./languages/cpp/addmethoddialogbase.ui line 158
#: rc.cpp:6673
#, no-c-format
msgid "Return t&ype:"
msgstr "Returt&ype:"
#. i18n: file ./languages/cpp/addmethoddialogbase.ui line 182
#: rc.cpp:6676 rc.cpp:6727
#, no-c-format
msgid "D&eclarator:"
msgstr "D&eklarator:"
#. i18n: file ./languages/cpp/addmethoddialogbase.ui line 208
#: rc.cpp:6679 rc.cpp:6730
#, no-c-format
msgid "S&torage:"
msgstr "L&agring:"
#. i18n: file ./languages/cpp/addmethoddialogbase.ui line 219
#: rc.cpp:6682
#, no-c-format
msgid "&Inline"
msgstr "&I teksten"
#. i18n: file ./languages/cpp/addmethoddialogbase.ui line 227
#: rc.cpp:6685 rc.cpp:6733
#, no-c-format
msgid "Acce&ss:"
msgstr "Tilga&ng:"
#. i18n: file ./languages/cpp/addmethoddialogbase.ui line 247
#: rc.cpp:6688
#, no-c-format
msgid "I&mplementation File"
msgstr "I&mplementasjonsfil"
#. i18n: file ./languages/cpp/addattributedialogbase.ui line 16
#: rc.cpp:6700
#, no-c-format
msgid "Add Attribute"
msgstr "Legg til attributt"
#. i18n: file ./languages/cpp/addattributedialogbase.ui line 110
#: rc.cpp:6715
#, no-c-format
msgid "&Add Attribute"
msgstr "Legg til &attributt"
#. i18n: file ./languages/cpp/addattributedialogbase.ui line 118
#: rc.cpp:6718
#, no-c-format
msgid "&Delete Attribute"
msgstr "&Slett attributt"
#. i18n: file ./languages/cpp/addattributedialogbase.ui line 128
#: rc.cpp:6721
#, no-c-format
msgid "Attribute Properties"
msgstr "Attributtegenskaper"
#. i18n: file ./languages/cpp/subclassingdlgbase.ui line 16
#: rc.cpp:6742
#, no-c-format
msgid "Create Subclass"
msgstr "Opprett subklasse"
#. i18n: file ./languages/cpp/subclassingdlgbase.ui line 27
#: rc.cpp:6745
#, no-c-format
msgid "Subclass Properties"
msgstr "Subklassegenskaper"
#. i18n: file ./languages/cpp/subclassingdlgbase.ui line 38
#: rc.cpp:6748 rc.cpp:8173
#, no-c-format
msgid "&Specialize following slots:"
msgstr "&Spesialiser følgende slotter:"
#. i18n: file ./languages/cpp/subclassingdlgbase.ui line 62
#: rc.cpp:6751 rc.cpp:7730 rc.cpp:8179
#, no-c-format
msgid "C&lass name:"
msgstr "K&lassenavn:"
#. i18n: file ./languages/cpp/subclassingdlgbase.ui line 81
#: rc.cpp:6754 rc.cpp:8176
#, no-c-format
msgid "F&ile name:"
msgstr "F&ilnavn:"
#. i18n: file ./languages/cpp/subclassingdlgbase.ui line 95
#: parts/classview/classtreebase.cpp:81 rc.cpp:6757 rc.cpp:8158
#, no-c-format
msgid "Method"
msgstr "Metode"
#. i18n: file ./languages/cpp/subclassingdlgbase.ui line 157
#: rc.cpp:6772 rc.cpp:8152
#, no-c-format
msgid "Re&format source"
msgstr "Om&formater kildekode"
#. i18n: file ./languages/cpp/subclassingdlgbase.ui line 173
#: rc.cpp:6775 rc.cpp:8155
#, no-c-format
msgid "Reformat source by &default"
msgstr "Omformater kil&dekoden som standard"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 27
#: rc.cpp:6784
#, no-c-format
msgid "Class &Templates"
msgstr "Klasse&maler"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 36
#: rc.cpp:6787
#, no-c-format
msgid "Cpp Header"
msgstr "Cpp-hode"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 41
#: rc.cpp:6790
#, no-c-format
msgid "Cpp Source"
msgstr "Cpp kilde"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 46
#: rc.cpp:6793
#, no-c-format
msgid "Objective-C Header"
msgstr "Objective-C-hode"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 51
#: rc.cpp:6796
#, no-c-format
msgid "Objective-C Source"
msgstr "Objective-C kilde"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 56
#: rc.cpp:6799
#, no-c-format
msgid "GTK C Header"
msgstr "GTK C-hode"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 61
#: rc.cpp:6802
#, no-c-format
msgid "GTK C Source"
msgstr "GTK C-kilde"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 88
#: rc.cpp:6805
#, no-c-format
msgid "Names"
msgstr "Brukernavn"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 99
#: rc.cpp:6808
#, no-c-format
msgid "#ifndef - #&define names:"
msgstr "#ifndef #&define-navn:"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 110
#: rc.cpp:6811
#, no-c-format
msgid "&File names:"
msgstr "&Filnavn:"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 119
#: rc.cpp:6814 rc.cpp:6823 rc.cpp:6835
#, no-c-format
msgid "Lowercase"
msgstr "Små bokstaver"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 124
#: rc.cpp:6817 rc.cpp:6826 rc.cpp:6838
#, no-c-format
msgid "Uppercase"
msgstr "Store bokstaver"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 129
#: rc.cpp:6820 rc.cpp:6829 rc.cpp:6841
#, no-c-format
msgid "Same as Class Names"
msgstr "Samme som klassenavn"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 154
#: rc.cpp:6832
#, no-c-format
msgid "Same as File Names"
msgstr "Samme som filnavn"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 189
#: rc.cpp:6844
#, no-c-format
msgid "&Superclass file names:"
msgstr "&Superklasse-filnavn:"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 202
#: rc.cpp:6847
#, no-c-format
msgid "Class Documentation"
msgstr "Klassedokumentasjon"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 213
#: rc.cpp:6850
#, no-c-format
msgid "Include &author name in class documentation"
msgstr "Ta med forf&atternavn i klassedokumentasjonen"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 221
#: rc.cpp:6853
#, no-c-format
msgid "Generate &empty documentation strings"
msgstr "Lag tomm&e dokumentasjonsstrenger"
#. i18n: file ./languages/cpp/classgeneratorconfigbase.ui line 231
#: rc.cpp:6856
#, no-c-format
msgid "&Reformat source before creating files"
msgstr "Onfo&rmatter kildekoden før det opprettes filer"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 16
#: rc.cpp:6859
#, no-c-format
msgid "C++ Options"
msgstr "C++-flagg"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 31
#: rc.cpp:6862
#, fuzzy, no-c-format
msgid "&Code Completion"
msgstr "Kodefu&llføring"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 50
#: rc.cpp:6865
#, no-c-format
msgid "Code Completion Options"
msgstr "Valg for kodefullføring"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 69
#: rc.cpp:6868
#, fuzzy, no-c-format
msgid "A&utomatic code completion:"
msgstr "Automatisk k&odefullføring:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 75
#: rc.cpp:6871
#, no-c-format
msgid "Offer options to complete what you are typing."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 116
#: rc.cpp:6874
#, no-c-format
msgid "How long after a key press to offer suggestions"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 143
#: rc.cpp:6880
#, no-c-format
msgid ""
"List &global items when\n"
"performing automatic completion"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 152
#: rc.cpp:6884 rc.cpp:6893
#, no-c-format
msgid ""
"When this is checked, members of all \n"
"higher namespaces will be included in \n"
"the completion-list while performing \n"
"automatic completion. \n"
"\n"
"This may bloat the completion-list \n"
"and create a significant delay."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 169
#: rc.cpp:6902
#, fuzzy, no-c-format
msgid "&Do complete member-type-evaluation"
msgstr "Fullstendig boolsk evaluering"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 176
#: rc.cpp:6905 rc.cpp:6912
#, no-c-format
msgid ""
"Completely evaluate member-types of \n"
"template-classes (this includes types \n"
"of member-variables and return-types \n"
"of member-functions) in the \n"
"completion-box."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 191
#: rc.cpp:6919
#, fuzzy, no-c-format
msgid "Do complete argument-type-e&valuation"
msgstr "Fullstendig boolsk evaluering"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 196
#: rc.cpp:6922 rc.cpp:6927
#, no-c-format
msgid ""
"Completely evaluate the function-argument-types \n"
"of template-class member-functions in the \n"
"completion-box."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 211
#: rc.cpp:6932
#, fuzzy, no-c-format
msgid "Argument Hint Options"
msgstr "Ant-valg"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 222
#: rc.cpp:6935
#, fuzzy, no-c-format
msgid "Auto&matic arguments hint:"
msgstr "Automatiske &argument-tips:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 290
#: rc.cpp:6941
#, fuzzy, no-c-format
msgid ""
"Show comment with\n"
"argument hint"
msgstr "Automatiske &argument-tips:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 313
#: rc.cpp:6945
#, fuzzy, no-c-format
msgid "Incremental Parsing"
msgstr "Ada-tolking"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 324
#: rc.cpp:6948
#, fuzzy, no-c-format
msgid "Do not process included headers"
msgstr "Ikke ta med registerkapitler"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 336
#: rc.cpp:6951
#, no-c-format
msgid ""
"Preprocess and parse included \n"
"headers into a database(experimental)"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 341
#: rc.cpp:6955
#, no-c-format
msgid ""
"Parse preprocessed headers that are not part of this project \n"
"into a special completion-database. To reparse the headers delete\n"
"the database and reopen the project."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 350
#: rc.cpp:6960
#, no-c-format
msgid ""
"Preprocess included headers\n"
"(collect macros and visibility-information)"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 357
#: rc.cpp:6964
#, no-c-format
msgid ""
"Try to locate all included files and preprocess them. \n"
"This makes macros and imported namespaces work correctly, and allows TDevelop\n"
"to know what code-items are visible from within which file.\n"
"Note: Parsing may become very slow when this is enabled\n"
"(It will become faster after some time)."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 367
#: rc.cpp:6971
#, no-c-format
msgid "Code Completion Databases"
msgstr "Databaser for kodefullføring"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 370
#: rc.cpp:6974
#, no-c-format
msgid ""
"<b>Code Completion Databases</b> are used to store the parsed headers for "
"external libraries, to allow code completion for non-project classes and "
"methods."
msgstr ""
"<b>Dathabaser for kodefullføring</b> brukes til å lagre tolkede deklarasjoner "
"for eksterne biblioteker, slik at kodefullføring kan brukes for klasser og "
"metoder utenfor prosjektet."
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 431
#: rc.cpp:6983
#, no-c-format
msgid "Click to start the Code Completion database creation wizard."
msgstr ""
"Trykk for å starte veiviseren for oppretting av database for kodefullføring."
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 470
#: rc.cpp:6989
#, no-c-format
msgid "Misc"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 489
#: rc.cpp:6992
#, no-c-format
msgid "Advanced include-path resolution using make(e&xperimental)"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 496
#: rc.cpp:6995
#, no-c-format
msgid ""
"Try to resolve the include-path by getting the command that would be used \n"
"for compiling the file and parsing the gcc-options. The build-system needs to "
"be working, \n"
"test for problems by running \"make -n -W myfile.cpp myfile.o\" in the "
"directory. \n"
"This also works with cmake, and maybe some other build-systems that build on "
"make. \n"
"The project needs to be compiled or at least configured before this system may "
"work."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 504
#: rc.cpp:7002
#, fuzzy, no-c-format
msgid "Show t&ype evaluation in status bar"
msgstr "Vis lukke-knapp i fanelinja"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 512
#: rc.cpp:7005
#, fuzzy, no-c-format
msgid "src;"
msgstr "struct"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 516
#: rc.cpp:7008
#, no-c-format
msgid ""
"A semicolon-separated list of include-paths to be used while searching for "
"headers. \n"
"Paths not starting with '/' will be interpreted as relative to the "
"project-folder."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 524
#: rc.cpp:7012
#, no-c-format
msgid "std=_GLIBCXX_STD"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 530
#: rc.cpp:7015
#, no-c-format
msgid ""
"This line may contain a semicolon-separated list of namespace-aliases and "
"namespace-imports. \n"
"example: \"std<<_GLIBCXX_STD;NewNamespaceName=OldNamespaceName; << "
"SomeGloballyImportedNamespace\" (without paratheses). \n"
"\"<<\" means that the right namespace is imported into the left, while \"=\" "
"means that both namespaces are treated as\n"
"if they were one(\"a=b\" is equivalent to \"a<<b;b<<a\")"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 538
#: rc.cpp:7021
#, fuzzy, no-c-format
msgid "Custom include paths:"
msgstr "Stryk fra inkluder-sti"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 546
#: rc.cpp:7024
#, fuzzy, no-c-format
msgid "Namespace alias list:"
msgstr "Na&vneområde:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 575
#: rc.cpp:7027
#, fuzzy, no-c-format
msgid "&Navigation"
msgstr "Funksjonsnavigering"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 586
#: rc.cpp:7030
#, no-c-format
msgid "Header/Source split (Highly Experimental)"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 597
#: rc.cpp:7033
#, no-c-format
msgid "Enable split of Header/So&urce files"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 600
#: rc.cpp:7036 rc.cpp:7039
#, no-c-format
msgid "Check to have header and source appear in the same page."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 622
#: rc.cpp:7042
#, fuzzy, no-c-format
msgid "Automatic S&ynchronize"
msgstr "Automatisk synkronisering"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 626
#: rc.cpp:7045 rc.cpp:7049
#, no-c-format
msgid ""
"Check to have the source file scroll as you \n"
"navigate the header and vice versa"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 643
#: rc.cpp:7053
#, fuzzy, no-c-format
msgid "Orientation"
msgstr "Mål:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 649
#: rc.cpp:7056
#, no-c-format
msgid "Select which Qt version your project is using."
msgstr "Velg hvilken Qt-versjon prosjektet ditt bruker."
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 660
#: kdevdesigner/designer/formwindow.cpp:361 rc.cpp:7059
#, no-c-format
msgid "&Vertical"
msgstr "&Loddrett"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 666
#: rc.cpp:7062
#, no-c-format
msgid "Select this if your project is using Qt version 3.x."
msgstr "Velg dette hvis ditt prosjekt bruker Qt versjon 3.x."
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 674
#: rc.cpp:7065
#, fuzzy, no-c-format
msgid "Hori&zontal"
msgstr "&Vannrett"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 677
#: rc.cpp:7068
#, no-c-format
msgid "Select this if your project is using Qt version 4.x."
msgstr "Velg dette hvis ditt prosjekt bruker Qt versjon 4.x."
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 706
#: rc.cpp:7071
#, no-c-format
msgid "Context Menu"
msgstr "Kontekst-meny"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 717
#: rc.cpp:7074
#, fuzzy, no-c-format
msgid "Switch Header/Implementation &matches current function"
msgstr "Bytt deklarasjon/implementasjon stemmer med gjeldende funksjon"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 726
#: rc.cpp:7077 rc.cpp:7083
#, fuzzy, no-c-format
msgid ""
"Check to have the <b>Switch Header/Implementation</b> \n"
"feature attempt to match the function under the \n"
"cursor with the matching declaration/definition.\n"
msgstr ""
"Kryss av for at <b>Bytt deklarasjon/implementasjon</b> "
"skal forsøke å stille sammen funksjonen under markøren med tilhørende "
"deklarasjon/definisjon."
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 740
#: rc.cpp:7089
#, fuzzy, no-c-format
msgid "Show Go To &Declaration/Definition submenus"
msgstr "Vis undermenyene Gå til deklarasjjon/definisjon"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 747
#: rc.cpp:7092 rc.cpp:7099
#, fuzzy, no-c-format
msgid ""
"Check to show two additional submenus \n"
"in the editor context menu containing \n"
"all the declarations and definitions \n"
"for the current file and its matching \n"
"header/implementation file."
msgstr ""
"Kryss av for å få vist ytterligere to undermenyer i redigeringens "
"kontekst-meny, som inneholder alle deklarasjoner og definisjoner for gjeldende "
"fil og dens tilhørende deklarasjons/implementasjonsfil."
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 762
#: rc.cpp:7106
#, fuzzy, no-c-format
msgid "Show type evaluation &based navigation menus"
msgstr "Vis undermenyene Gå til deklarasjjon/definisjon"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 767
#: rc.cpp:7109 rc.cpp:7114
#, no-c-format
msgid ""
"Menus appear on the right mouse click context menu, \n"
"hows menu items to navigate. Needs the \"Class View\"\n"
"plugin enabled to have use all options."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 784
#: rc.cpp:7119
#, fuzzy, no-c-format
msgid "Class Wi&zard"
msgstr "Innstillinger for klasseveiviser"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 803
#: rc.cpp:7122
#, fuzzy, no-c-format
msgid "Filename options"
msgstr "Filterinnstillinger"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 806
#: rc.cpp:7125
#, no-c-format
msgid ""
"These are the suffixes used by the Class Wizard when creating new classes."
"<br>Should be in the format: \".suffix\""
msgstr ""
"Dette er suffiksene som brukes av klasseveiviseren når det opprettes nye "
"klasser. "
"<br>Bør være i formatet: «.suffiks»"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 827
#: rc.cpp:7128
#, no-c-format
msgid "&Interface suffix:"
msgstr "&Grensesnitt-suffiks:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 838
#: rc.cpp:7131
#, no-c-format
msgid "I&mplementation suffix:"
msgstr "I&mplementasjonssuffiks:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 870
#: rc.cpp:7134
#, fuzzy, no-c-format
msgid "&Qt Options"
msgstr "Ant-valg"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 881
#: rc.cpp:7137
#, fuzzy, no-c-format
msgid "Enable Qt opt&ions"
msgstr "Slå på optimeringer"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 892
#: rc.cpp:7140
#, no-c-format
msgid "Qt Version, Directory and QMake Binary"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 900
#: rc.cpp:7143
#, no-c-format
msgid ""
"Select which Qt version your project is using and where that Qt version is "
"installed to.\n"
"\n"
"This option only applies to QMake projects."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 919
#: rc.cpp:7148
#, fuzzy, no-c-format
msgid "Qt 3"
msgstr "Qt 3.x"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 925
#: rc.cpp:7151
#, no-c-format
msgid ""
"Use Qt version 3 (When this is changed the project needs to be closed and "
"re-opened.)"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 928
#: rc.cpp:7154
#, no-c-format
msgid ""
"Select this if your project is using Qt version 3.x."
"<br>When this is changed the project needs to be closed and re-opened."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 936
#: rc.cpp:7157
#, fuzzy, no-c-format
msgid "Qt 4"
msgstr "Qt 4.x"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 939
#: rc.cpp:7160
#, no-c-format
msgid ""
"Use Qt version 4 (When this is changed the project needs to be closed and "
"re-opened.)"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 942
#: rc.cpp:7163
#, no-c-format
msgid ""
"Select this if your project is using Qt version 4.x."
"<br>When this is changed the project needs to be closed and re-opened."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 950
#: rc.cpp:7166
#, no-c-format
msgid "(After changing the project needs to be re-opened)"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 988
#: rc.cpp:7169
#, fuzzy, no-c-format
msgid "Qt3 Directory:"
msgstr "Mappe:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 991
#: rc.cpp:7172
#, no-c-format
msgid ""
"This setting is only needed for Qt3 programs, for Qt4 just make sure the QMake "
"Binary is set properly"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 999
#: rc.cpp:7175
#, no-c-format
msgid ""
"The Qt directory, will be red if it is not a valid Qt directory. This setting "
"is only needed for Qt3 programs."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1002
#: rc.cpp:7178
#, no-c-format
msgid ""
"Choose the directory that Qt was installed to. If this is shown in red the "
"directory is not a valid Qt directory."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1020
#: rc.cpp:7181
#, fuzzy, no-c-format
msgid "QMake Binary:"
msgstr "QMake-håndtering"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1028
#: rc.cpp:7184
#, no-c-format
msgid "The full path to the QMake executable to be used"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1043
#: rc.cpp:7187
#, fuzzy, no-c-format
msgid "Qt include syntax"
msgstr "Utvidet syntaks"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1049
#: rc.cpp:7190
#, fuzzy, no-c-format
msgid "Select which include style your project is using."
msgstr "Velg hvilken Qt-versjon prosjektet ditt bruker."
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1060
#: rc.cpp:7193
#, no-c-format
msgid "Qt &3 style (#include <qwidget.h>)"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1063
#: rc.cpp:7196
#, fuzzy, no-c-format
msgid "Alt+3"
msgstr "Alt + 1"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1069
#: rc.cpp:7199
#, fuzzy, no-c-format
msgid ""
"Select this if your project is using include style as known from Qt version "
"3.x."
msgstr "Velg dette hvis ditt prosjekt bruker Qt versjon 3.x."
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1077
#: rc.cpp:7202
#, no-c-format
msgid "Qt &4 style (#include <QWidget>)"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1080
#: rc.cpp:7205
#, fuzzy, no-c-format
msgid "Alt+4"
msgstr "Alt + 1"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1083
#: rc.cpp:7208
#, fuzzy, no-c-format
msgid ""
"Select this if your project is using include style as known from Qt version "
"4.x."
msgstr "Velg dette hvis ditt prosjekt bruker Qt versjon 4.x."
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1096
#: rc.cpp:7211
#, fuzzy, no-c-format
msgid "UI Designer Integration"
msgstr "<qt><h3>Integrasjon med brukerflate-bygging</h3></qt>"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1116
#: rc.cpp:7217
#, fuzzy, no-c-format
msgid "Start TDevelop's own designer embedded within TDevelop"
msgstr "Start KDevelops egen brukerflate-bygger innebygget i KDevelop"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1127
#: rc.cpp:7223
#, fuzzy, no-c-format
msgid "Run &TDevelop's designer as a separate application"
msgstr "Kjør KDevelops &brukerflate-bygger som et frittstående program"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1130
#: rc.cpp:7226
#, fuzzy, no-c-format
msgid "Start TDevelop's own designer externally"
msgstr "Start KDevelops egen bygger eksternt"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1141
#: rc.cpp:7232
#, fuzzy, no-c-format
msgid "Run Qt &Designer"
msgstr "Kjør Qt Desi&gner"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1163
#: rc.cpp:7241
#, fuzzy, no-c-format
msgid "Designer Binary:"
msgstr "KDevDesignerPart"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1174
#: rc.cpp:7244
#, no-c-format
msgid "The full path to the Designer executable to be used"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1192
#: rc.cpp:7247
#, no-c-format
msgid "Extra Plugin Paths for Qt4 Designer:"
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1203
#: rc.cpp:7250
#, fuzzy, no-c-format
msgid "Change Plugin Paths"
msgstr "Stier for tille&ggsmoduler"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1234
#: rc.cpp:7253
#, no-c-format
msgid "&Accessors"
msgstr "&Tilgripere"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1245
#: rc.cpp:7256
#, no-c-format
msgid "E&xample for Member Variable of Type String"
msgstr "E&ksempel for medlemsvariabel av type String"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1264
#: rc.cpp:7259
#, no-c-format
msgid "Variable name:"
msgstr "Variabelnavn:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1272
#: rc.cpp:7262
#, no-c-format
msgid "m_x"
msgstr "m_x"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1299
#: rc.cpp:7265
#, no-c-format
msgid "int x() const;"
msgstr "int x() const;"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1310
#: rc.cpp:7268
#, no-c-format
msgid "void setX(const string& theValue);"
msgstr "void setX(const string& theValue);"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1321
#: rc.cpp:7271
#, no-c-format
msgid "Get method:"
msgstr "get-metode:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1329
#: rc.cpp:7274
#, no-c-format
msgid "Set method:"
msgstr "set-metode:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1344
#: rc.cpp:7280 rc.cpp:7285 rc.cpp:7290 rc.cpp:7295 rc.cpp:7306 rc.cpp:7311
#, no-c-format
msgid ""
"Will show as \"Create Accessor Methods\" in the\n"
"right mouse button context menu only when \n"
"you right click on a variable in a header file."
msgstr ""
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1375
#: rc.cpp:7300
#, no-c-format
msgid "Prefix for <b>get</b> methods:"
msgstr "Prefiks for <b>get</b>-metoder:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1383
#: parts/ctags2/ctagskinds.cpp:175 rc.cpp:7303
#, no-c-format
msgid "set"
msgstr "set"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1401
#: rc.cpp:7316
#, no-c-format
msgid "Prefix for <b>set</b> methods:"
msgstr "Prefiks for <b>set</b>-metoder:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1409
#: rc.cpp:7319
#, no-c-format
msgid "m_"
msgstr "m_"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1417
#: rc.cpp:7322
#, no-c-format
msgid "Member <b>variable</b> prefix to remove:"
msgstr "Prefiks som skal fjernes fra medlems<b>variabel</b>:"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1425
#: rc.cpp:7325
#, no-c-format
msgid "theValue"
msgstr "Verdien"
#. i18n: file ./languages/cpp/ccconfigwidgetbase.ui line 1450
#: rc.cpp:7328
#, no-c-format
msgid "<b>Parametername</b> in set method:"
msgstr "<b>Parameternavn</b> i set-metode:"
#. i18n: file ./languages/cpp/pcsimporter/qtimporter/settingsdialogbase.ui line 57
#: rc.cpp:7331 rc.cpp:7364
#, fuzzy, no-c-format
msgid "Scope:"
msgstr "Poeng"
#. i18n: file ./languages/cpp/pcsimporter/qtimporter/settingsdialogbase.ui line 73
#: rc.cpp:7334
#, no-c-format
msgid ""
"Select the Qt configuration for which to create a Code Completion database. If "
"you do not know what this option does, accept the default."
msgstr ""
#. i18n: file ./languages/cpp/pcsimporter/qtimporter/settingsdialogbase.ui line 105
#: rc.cpp:7340
#, no-c-format
msgid ""
"Qt3 include directories:\n"
"Only the selected entry will be used"
msgstr ""
#. i18n: file ./languages/cpp/pcsimporter/qt4importer/settingsdialogbase.ui line 25
#: rc.cpp:7344
#, no-c-format
msgid ""
"Qt4 include directories:\n"
"Only the selected entry will be used"
msgstr ""
#. i18n: file ./languages/cpp/pcsimporter/tdelibsimporter/settingsdialogbase.ui line 25
#: rc.cpp:7351
#, no-c-format
msgid ""
"TDE include directories:\n"
"Only the selected entry will be used"
msgstr ""
#. i18n: file ./languages/cpp/pcsimporter/tdelibsimporter/settingsdialogbase.ui line 31
#: rc.cpp:7355
#, no-c-format
msgid "TDE Libs Headers"
msgstr "TDE-bibliotekshoder"
#. i18n: file ./languages/cpp/pcsimporter/tdelibsimporter/settingsdialogbase.ui line 36
#: rc.cpp:7358
#, no-c-format
msgid "All TDE Headers"
msgstr "Alle TDE-hoder"
#. i18n: file ./languages/cpp/pcsimporter/tdelibsimporter/settingsdialogbase.ui line 46
#: rc.cpp:7361
#, no-c-format
msgid ""
"Decide if you want to restrict the Code Completion database to only the base "
"tdelibs API or the entire TDE include structure"
msgstr ""
#. i18n: file ./languages/cpp/pcsimporter/tdelibsimporter/settingsdialogbase.ui line 65
#: rc.cpp:7367
#, no-c-format
msgid ""
"If none of the directories TDevelop found is what you want,you can enter a "
"directory of your choice here"
msgstr ""
#. i18n: file ./languages/cpp/pcsimporter/customimporter/settingsdialogbase.ui line 32
#: rc.cpp:7373
#, no-c-format
msgid "*.h;*.H;*.hh;*.hxx;*.hpp;*.tlh"
msgstr ""
#. i18n: file ./languages/cpp/pcsimporter/customimporter/settingsdialogbase.ui line 40
#: rc.cpp:7376
#, fuzzy, no-c-format
msgid "Filename pattern:"
msgstr "Filnavn:"
#. i18n: file ./languages/cpp/pcsimporter/customimporter/settingsdialogbase.ui line 48
#: rc.cpp:7379
#, no-c-format
msgid "&Recursive"
msgstr "&Rekursivt"
#. i18n: file ./languages/cpp/debugger/debuggertracingdialogbase.ui line 16
#: rc.cpp:7382
#, no-c-format
msgid "Tracing Configuration"
msgstr "Sporingsoppsett"
#. i18n: file ./languages/cpp/debugger/debuggertracingdialogbase.ui line 27
#: rc.cpp:7385
#, no-c-format
msgid "Enable tracing"
msgstr "Slå på sporing"
#. i18n: file ./languages/cpp/debugger/debuggertracingdialogbase.ui line 31
#: rc.cpp:7388
#, no-c-format
msgid ""
"<b>Enable tracing</b>\n"
"<p>Tracing is a mechanism to automatically print values of the choosed "
"expressions and continue execution when breakpoint is hit. You can think of it "
"as printf debugging that does not require modifying the source.</p>"
msgstr ""
"<b >Slå på sporing</b>\n"
"<p>Sporing er en mekanisme som automatisk skriver ut verdiene på valgte uttrykk "
"og fortsetter kjøringen når et bruddpunkt er nådd. Tenk på det som "
"printf-avlusing som ikke trenger at kildekoden endres.</p>"
#. i18n: file ./languages/cpp/debugger/debuggertracingdialogbase.ui line 50
#: rc.cpp:7395
#, no-c-format
msgid "Custom format string"
msgstr "Tilpasset formatstreng"
#. i18n: file ./languages/cpp/debugger/debuggertracingdialogbase.ui line 92
#: rc.cpp:7401
#, no-c-format
msgid ""
"<b>Custom format string</b>\n"
"<p>Specify a C-style format string that will be used when printing the choosen "
"expression. For example:\n"
"<p align=\"center\"> <tt>Tracepoint 1: g = %d</tt></p>\n"
"If custom format string is not enabled, names and values of all expressions "
"will be printed, using \"%d\" as format specifier for all expressions."
msgstr ""
"<b>Tilpasset formatstreng</b>\n"
"<p>Oppgi en formatstreng som i C som skal brukes når det valgte uttrykket "
"skrives ut. For eksempel:\n"
"<p align=\"center\"><tt>Sporpunkt 1: g= %d</tt></p>\n"
"Hvis tilpassede formatstrenger ikke er slått på, så blir navn og verdi for alle "
"uttrykk skrevet ut med «%d» som formatspesifikasjon for alle uttrykk."
#. i18n: file ./languages/cpp/debugger/debuggertracingdialogbase.ui line 114
#: rc.cpp:7407
#, no-c-format
msgid "Expressions to print:"
msgstr "Uttrykk som skal skrives ut:"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 16
#: rc.cpp:7410
#, no-c-format
msgid "Debugger Configuration"
msgstr "Feilsøker-oppsett"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 34
#: rc.cpp:7413
#, no-c-format
msgid ""
"Debug arguments can be set on the Run Options page\n"
" or directly in the project manager"
msgstr ""
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 50
#: rc.cpp:7417
#, fuzzy, no-c-format
msgid "Debugger executable:"
msgstr "ht&merge programfil:"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 61
#: rc.cpp:7420
#, fuzzy, no-c-format
msgid "Gdb executable"
msgstr "htdi&g programfil:"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 64
#: rc.cpp:7423
#, no-c-format
msgid ""
"To run \"gdb\" binary from $PATH, leave this field empty. To run custom gdb, "
"for example, for a different architecture, enter the executable name here. You "
"can either run gdb from $PATH, but with a different name (say, \"arm-gdb\"), by "
"typing the name here, or specify full path to the gdb executable."
msgstr ""
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 80
#: rc.cpp:7426
#, no-c-format
msgid "Debugging &shell:"
msgstr "Feilsøkings&skall:"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 86
#: rc.cpp:7429 rc.cpp:7435
#, fuzzy, no-c-format
msgid "Run gdb in a special shell (mainly for automake projects)"
msgstr "Kjør gdb i et spesielt skall"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 89
#: rc.cpp:7432
#, no-c-format
msgid ""
"If you want gdb to be executed by a special shell or tool insert it here. The "
"main use-case is for Automake based projects where the application is actually "
"only a script and libtool is needed to get it to run inside gdb."
msgstr ""
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 100
#: rc.cpp:7438
#, no-c-format
msgid ""
"If you want gdb to be executed by a special shell or tool insert it here. The "
"main use-case is for Automake based projects where the application is actually "
"only a script and <b>libtool</b> is needed to get it to run inside gdb."
msgstr ""
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 127
#: rc.cpp:7444
#, no-c-format
msgid "Display &demangled names"
msgstr "Vis uforvri&dde navn"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 132
#: rc.cpp:7447
#, no-c-format
msgid ""
"When displaying the disassembled code you\n"
"can select to see the methods' mangled names.\n"
"However, non-mangled names are easier to read."
msgstr ""
"Ved visning av de-assemblert kode, kan du\n"
"velge å se forvridde metodenavn.\n"
"Metodenavnene er lettere å lese dersom de ikke\n"
"er forvridde."
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 140
#: rc.cpp:7452
#, no-c-format
msgid "Try settings &breakpoints on library loading"
msgstr "Prøv å sette &bruddpunkt ved bibliotekslasting"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 149
#: rc.cpp:7455
#, no-c-format
msgid ""
"If GDB has not seen a library that will be loaded via\n"
"\"dlopen\" then it will refuse to set a breakpoint in that code.\n"
"We can get GDB to stop on a library load and hence\n"
"try to set the pending breakpoints. See the documentation\n"
"for more details relating to this behavior.\n"
"\n"
"If you are not \"dlopen\"ing libs then leave this unchecked."
msgstr ""
"Dersom GDB ikke har sett et bibliotek som blir lastet\n"
"via «dlopen», så nekter den å sette et bruddpunkt i den koden.\n"
"Vi kan få GDB til å stoppe ved bibliotekslasting, og dermed\n"
"prøve å sette de ventende bruddpunktene. Du finner mer\n"
"informasjon i hjelpetekstene.\n"
"\n"
"Dersom du ikke bruker «dlopen» for å åpne bibliotek,\n"
"trenger du heller ikke bruke denne funksjonen."
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 157
#: rc.cpp:7464
#, fuzzy, no-c-format
msgid "Enable separate terminal for application &IO"
msgstr "Bruk egen &terminal for programkommunikasjon"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 160
#: rc.cpp:7467
#, fuzzy, no-c-format
msgid "Alt+I"
msgstr "Alt + 1"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 166
#: rc.cpp:7470
#, no-c-format
msgid ""
"This allows you to enter terminal input when your\n"
"application contains terminal input code (e.g. cin, fgets, etc.).\n"
"If you use terminal input in your application then check this option.\n"
"Otherwise leave it unchecked."
msgstr ""
"Lar deg skrive i et terminalvindu når programmet\n"
"bruker funksjoner for dette (t.d. cin, fgets,…).\n"
"Dersom du bruker slike funksjoner, må du merke av her."
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 174
#: rc.cpp:7476
#, fuzzy, no-c-format
msgid "E&nable floating toolbar"
msgstr "Bruk &flytende verktøylinje"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 185
#: rc.cpp:7482
#, fuzzy, no-c-format
msgid ""
"Use the floating toolbar. This toolbar always stays\n"
"on top of all windows so that if the app covers TDevelop\n"
"you have control of the app through the small toolbar. It\n"
"can also be docked into the panel.\n"
"\n"
"This toolbar is in addition to the toolbar in TDevelop."
msgstr ""
"Bruk flytende verktøylinje. Denne verktøylinja ligger\n"
"alltid over alle vinduer. Dersom et program legger seg\n"
" over KDevelop, har du likevel kontrollen gjenom \n"
"den vesle verktøylinja. Denne verktøylinja kan dessuten\n"
"legges inn på panelet.\n"
"\n"
"Denne verktøylinja kommer i tillegg til verktøylinja i KDevelop."
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 193
#: rc.cpp:7490
#, no-c-format
msgid "Display static &members"
msgstr "Vis statiske &medlemmer"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 196
#: rc.cpp:7493
#, fuzzy, no-c-format
msgid "Alt+M"
msgstr "Alt + 1"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 204
#: rc.cpp:7496
#, fuzzy, no-c-format
msgid ""
"Displaying static members makes GDB slower in\n"
"producing data within TDE and TQt.\n"
"It may change the \"signature\" of the data\n"
"which TQString and friends rely on,\n"
"but if you need to debug into these values then\n"
"check this option."
msgstr ""
"Vising av statiske medlemmer gjør gdb tregere\n"
"ved produksjon av data innenfor TDE og Qt.\n"
"Funksjonen kan endre «signaturen» til data som\n"
"QString med venner er avhengige av.\n"
"Dersom du trenger å feilsøke blant disse verdiene,\n"
"må du bruke denne funksjonen."
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 222
#: rc.cpp:7504
#, no-c-format
msgid "Global Output Radix"
msgstr "Grunntall for globale utdata"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 233
#: rc.cpp:7507
#, fuzzy, no-c-format
msgid "Oct&al"
msgstr "Oktal"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 241
#: rc.cpp:7510
#, fuzzy, no-c-format
msgid "He&xadecimal"
msgstr "Heksadesimal"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 249
#: languages/cpp/debugger/variablewidget.cpp:278 rc.cpp:7513
#, no-c-format
msgid "Decimal"
msgstr "Desimal"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 259
#: rc.cpp:7516
#, fuzzy, no-c-format
msgid "Start Debugger With"
msgstr "Start i feilsøker"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 270
#: rc.cpp:7519
#, fuzzy, no-c-format
msgid "Framestack"
msgstr "Stakk over funksjonskall"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 278
#: languages/cpp/debugger/debuggerpart.cpp:159 rc.cpp:7522
#, no-c-format
msgid "GDB Output"
msgstr "GDB utdata"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 292
#: rc.cpp:7525
#, no-c-format
msgid "Remote Debugging"
msgstr "Fjern-feilsøking"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 298
#: rc.cpp:7528
#, no-c-format
msgid ""
"This script is intended for the actual commands needed to connect to a remotely "
"running executable.\n"
"\tshell sleep 5\twait for remote program to start\n"
"\ttarget remote ...\tconnect to the remote debugger\n"
"\tcontinue\t[optional] run debugging to the first breakpoint."
msgstr ""
"Dette skriptet er ment for de kommandoene som trengs for å koble til et program "
"som går et annet sted.\n"
"\tshell sleep 5\tvent på at fjernprogrammet skal starte\n"
"\ttarget remote ...\tkoble til den andre feilsøkeren\n"
"\tcontinue\t[valgfritt] kjør feilsøking til det første brytpunktet."
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 317
#: rc.cpp:7534
#, fuzzy, no-c-format
msgid "R&un shell script:"
msgstr "Kjør skallskript:"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 332
#: rc.cpp:7537
#, no-c-format
msgid "Script to connect with remote application"
msgstr "Skript for tilkobling til fjernprogrammet"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 339
#: rc.cpp:7540
#, no-c-format
msgid ""
"This script is sourced by gdb after the two preceding scripts have been "
"executed.\n"
"This script is intended for the actual commands needed to connect to a remotely "
"running executable.\n"
"\tshell sleep 5\twait for remote program to start\n"
"\ttarget remote ...\tconnect to the remote debugger\n"
"\tcontinue\t[optional] run debugging to the first breakpoint."
msgstr ""
"Dette skriptet blir hentet inn og kjørt i gdb etter at de to foregående "
"skriptene er blitt kjørt.\n"
"Dette skriptet er ment for de kommandoene som trengs for å koble til et program "
"som går et annet sted.\n"
"\tshell sleep 5\tvent på at fjernprogrammet skal starte\n"
"\ttarget remote ...\tkoble til den andre feilsøkeren\n"
"\tcontinue\t[valgfritt] kjør feilsøing til det første brytpunktet."
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 347
#: rc.cpp:7547
#, no-c-format
msgid "Script to start remote application"
msgstr "Skript for å starte program på annen maskin"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 356
#: rc.cpp:7550
#, no-c-format
msgid ""
"This shell script is run after the Config gdb script has been sourced by gdb.\n"
"When debugging remotely this script is intended to actually start the remote "
"process.\n"
"[It is expected that the debug executable can be reached on the target, maybe "
"by downloading it as a final build step]\n"
"1) Find a way to execute a command remotely - rsh, ssh, telnet, ...\n"
"2a) Execute \"gdbserver ... application\" on target.\n"
"or if your executable contains the gdb stub\n"
"2b) Execute \"application\" on target."
msgstr ""
"Dette skallskriptet kjøres etter at gdb har hentet inn og kjørt "
"Config-skriptet.\n"
"Ved fjern-feilsøking er det meningen at dette skriptet skal starte prosessen på "
"den andre maskinen.\n"
"[Der forventes også at programmet det feilsøkes i kan nås på målmaskinen, "
"kanskje ved å laste det ned som siste trinn i byggingen]\n"
"1) Finn en måte å starte programmet på målmaskinen rsh,ssh, telnet osv.\n"
"2a) Kjør «gdbserver …program» på målmaskinen.\n"
"eller hvis programmet inneholder gdb-tilkoblingen\n"
"2b) kjør «program» på målmaskinen."
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 364
#: rc.cpp:7559
#, fuzzy, no-c-format
msgid "Run &gdb script:"
msgstr "Kjør gdb-script:"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 376
#: rc.cpp:7562
#, fuzzy, no-c-format
msgid "&Config gdb script:"
msgstr "Sett opp gdb-skript:"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 387
#: rc.cpp:7565
#, no-c-format
msgid "Gdb configure script"
msgstr "Gdb oppsettsskript"
#. i18n: file ./languages/cpp/debugger/debuggerconfigwidgetbase.ui line 390
#: rc.cpp:7568
#, no-c-format
msgid "This script is sourced by gdb when the debugging starts."
msgstr "Dette skriptet kjøres i gdb -prosessen når feilsøkingen begynner."
#. i18n: file ./languages/cpp/app_templates/kdevpart/projectconfigbase.ui line 16
#: languages/cpp/app_templates/kapp/main.cpp:23
#: languages/cpp/app_templates/kateplugin2/plugin_app.h:51
#: languages/cpp/app_templates/kdedcop/main.cpp:22
#: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:61
#: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:62
#: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:61
#: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:62
#: languages/cpp/app_templates/khello/main.cpp:22
#: languages/cpp/app_templates/khello2/main.cpp:22
#: languages/cpp/app_templates/kmake/app.cpp:21
#: languages/cpp/app_templates/kofficepart/kopart_aboutdata.h:17
#: languages/cpp/app_templates/kpartapp/main.cpp:21
#: languages/cpp/app_templates/kscons_kxt/main.cpp:22
#: languages/cpp/app_templates/kscons_tdemdi/main.cpp:24
#: languages/cpp/app_templates/kxt/main.cpp:22
#: languages/cpp/app_templates/tdeconfig35/main.cpp:22
#: languages/cpp/app_templates/tdescreensaver/tdescreensaver.cpp:18
#: rc.cpp:7571 rc.cpp:7574 rc.cpp:7577 rc.cpp:7601 rc.cpp:7652 rc.cpp:7655
#, no-c-format
msgid "%{APPNAME}"
msgstr "%{APPNAME}"
#. i18n: file ./languages/cpp/app_templates/opieapp/examplebase.ui line 32
#: rc.cpp:7580 rc.cpp:7604
#, no-c-format
msgid ""
"<p>This is just an <i>%{APPNAMELC}</i>; it does not do anything interesting at "
"all."
msgstr ""
"<p>Dette er bare en <i>%{APPNAMELC}</i>, den gjør ikke noe interessant i det "
"hele tatt."
#. i18n: file ./languages/cpp/app_templates/kscons_kxt/prefs-base.ui line 26
#: rc.cpp:7586 rc.cpp:7610 rc.cpp:7625 rc.cpp:7815
#, no-c-format
msgid "Background color:"
msgstr "Bakgrunnsfarge:"
#. i18n: file ./languages/cpp/app_templates/kscons_kxt/prefs-base.ui line 42
#: rc.cpp:7589 rc.cpp:7613 rc.cpp:7628 rc.cpp:7818
#, no-c-format
msgid "Project age:"
msgstr "Prosjektalder:"
#. i18n: file ./languages/cpp/app_templates/kscons_kxt/prefs-base.ui line 50
#: rc.cpp:7592 rc.cpp:7616 rc.cpp:7631 rc.cpp:7821
#, no-c-format
msgid "Foreground color:"
msgstr "Forgrunnsfarge:"
#. i18n: file ./languages/cpp/app_templates/kscons_kxt/appview_base.ui line 18
#: rc.cpp:7595
#, no-c-format
msgid "%{APPNAME}_base"
msgstr "%{APPNAME}_base"
#. i18n: file ./languages/cpp/app_templates/kscons_kxt/appview_base.ui line 29
#: rc.cpp:7598 rc.cpp:7622 rc.cpp:7637 rc.cpp:7827
#, no-c-format
msgid "hello, world"
msgstr "Hei, verden"
#. i18n: file ./languages/cpp/app_templates/tdeconfig35/appview_base.ui line 16
#: rc.cpp:7619 rc.cpp:7634
#, no-c-format
msgid "%{APPNAMELC}_base"
msgstr "%{APPNAMELC}_base"
#. i18n: file ./languages/cpp/app_templates/tdescreensaver/tdescreensaverui.ui line 18
#: rc.cpp:7640
#, no-c-format
msgid "Screen Saver Config"
msgstr "Oppsett for pauseskjerm"
#. i18n: file ./languages/cpp/app_templates/tdescreensaver/tdescreensaverui.ui line 41
#: rc.cpp:7643
#, no-c-format
msgid "Set some setting"
msgstr "Sett en innstilling"
#. i18n: file ./languages/cpp/app_templates/kmake/mainview.ui line 32
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:108
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:32 rc.cpp:7658
#, no-c-format
msgid "Output"
msgstr "Utdata"
#. i18n: file ./languages/cpp/app_templates/kmake/mainview.ui line 59
#: rc.cpp:7661
#, no-c-format
msgid "Hello"
msgstr "Hallo"
#. i18n: file ./languages/cpp/app_templates/khello2/widgetbase.ui line 27
#: rc.cpp:7664
#, no-c-format
msgid "Click Me!"
msgstr "Trykk meg!"
#. i18n: file ./languages/cpp/app_templates/kscons_tdemdi/prefs.ui line 24
#: rc.cpp:7667
#, no-c-format
msgid "Show close buttons on the right of tabs"
msgstr "Vis lukk-knapper til høyre for faneblad"
#. i18n: file ./languages/python/pythonconfigwidgetbase.ui line 16
#: languages/python/pythonsupportpart.cpp:111 rc.cpp:7670
#, no-c-format
msgid "Python"
msgstr "Python"
#. i18n: file ./languages/python/pythonconfigwidgetbase.ui line 27
#: rc.cpp:7673
#, no-c-format
msgid "Python &interpreter:"
msgstr "Python-&tolker:"
#. i18n: file ./languages/python/pythonconfigwidgetbase.ui line 91
#: rc.cpp:7676 rc.cpp:7700 rc.cpp:7709
#, no-c-format
msgid "&Execute programs in a terminal"
msgstr "Kjør programm&er i et terminalvindu"
#. i18n: file ./languages/python/app_templates/pyqt/documentdetails.ui line 16
#: rc.cpp:7679
#, no-c-format
msgid "Document Details"
msgstr "Dokumentdetaljer"
#. i18n: file ./languages/python/app_templates/pyqt/documentdetails.ui line 35
#: rc.cpp:7682
#, no-c-format
msgid "Enter details about this document below."
msgstr "Oppgi detaljer om dette dokumentet nedenfor."
#. i18n: file ./languages/python/app_templates/pyqt/documentdetails.ui line 46
#: parts/snippet/snippet_part.cpp:88 vcs/subversion/svn_blamewidget.cpp:38
#: vcs/subversion/svn_logviewwidget.cpp:53 rc.cpp:7685
#, no-c-format
msgid "Author"
msgstr "Forfatter"
#. i18n: file ./languages/python/app_templates/pyqt/documentdetails.ui line 72
#: rc.cpp:7691
#, no-c-format
msgid "Company"
msgstr "Firma"
#. i18n: file ./languages/csharp/csharpconfigwidgetbase.ui line 16
#: rc.cpp:7694
#, no-c-format
msgid "CSharp"
msgstr ""
#. i18n: file ./languages/csharp/csharpconfigwidgetbase.ui line 28
#: rc.cpp:7697
#, fuzzy, no-c-format
msgid "CSharp &interpreter:"
msgstr "Perl-&tolker:"
#. i18n: file ./languages/perl/perlconfigwidgetbase.ui line 16
#: parts/doxygen/messages.cpp:218 rc.cpp:7703
#, no-c-format
msgid "Perl"
msgstr "Perl"
#. i18n: file ./languages/perl/perlconfigwidgetbase.ui line 28
#: rc.cpp:7706
#, no-c-format
msgid "Perl &interpreter:"
msgstr "Perl-&tolker:"
#. i18n: file ./languages/lib/designer_integration/implementationwidgetbase.ui line 16
#: rc.cpp:7712
#, no-c-format
msgid "Create or Select Implementation Class"
msgstr "Opprett eller velg implementasjonsklasse"
#. i18n: file ./languages/lib/designer_integration/implementationwidgetbase.ui line 100
#: rc.cpp:7721
#, no-c-format
msgid "Create &new class"
msgstr "Opprett en &ny klasse"
#. i18n: file ./languages/lib/designer_integration/implementationwidgetbase.ui line 109
#: rc.cpp:7724
#, no-c-format
msgid "Class Name"
msgstr "Klassenavn"
#. i18n: file ./languages/lib/designer_integration/implementationwidgetbase.ui line 167
#: rc.cpp:7733
#, no-c-format
msgid "Use &existing class"
msgstr "Bruk &eksisterende klasse"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 50
#: rc.cpp:7739
#, no-c-format
msgid "Ru&by shell:"
msgstr "Ru&by-skall:"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 57
#: rc.cpp:7742
#, no-c-format
msgid ""
"This is the path (or just name, if in $PATH) to the Ruby shell. Defaults to "
"\"irb\". Add this line to your .irbrc file:\n"
"def cd(dir) Dir.chdir dir end"
msgstr ""
"Dette er stien (eller bare navnet, om den er i $PATH) til Ruby-skallet. "
"Standard er «irb». Legg til denne linja i .ibrc-fila:\n"
"def cd(dir) Dir.chdir dir end"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 78
#: rc.cpp:7746
#, no-c-format
msgid "Program &arguments:"
msgstr "Programp&arametre:"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 84
#: rc.cpp:7749
#, no-c-format
msgid "These are the arguments passed to the Ruby interpreter"
msgstr "Dette er argumentene som sendes til Ruby-tolkeren"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 100
#: rc.cpp:7752
#, no-c-format
msgid "&Ruby interpreter:"
msgstr "%Ruby-tolker:"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 106
#: rc.cpp:7755
#, no-c-format
msgid ""
"This is the path (or just name, if in $PATH) to the Ruby interpreter. Defaults "
"to \"ruby\""
msgstr ""
"Dette er stien (eller bare navnet, om den er i $PATH) til Ruby-tolkeren. "
"Standard er «ruby»"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 122
#: rc.cpp:7758
#, no-c-format
msgid "&Main program:"
msgstr "&Hovedprogram:"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 128
#: rc.cpp:7761
#, no-c-format
msgid "This is the name of the main program source file"
msgstr "Dette er navnet på kildefila med hovedprogrammet"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 181
#: languages/bash/bashsupport_part.cpp:47
#: languages/cpp/debugger/dbgtoolbar.cpp:301
#: languages/php/phpsupportpart.cpp:94
#: languages/ruby/debugger/dbgtoolbar.cpp:300
#: languages/ruby/rubysupport_part.cpp:54 languages/sql/sqlsupport_part.cpp:44
#: rc.cpp:7767
#, no-c-format
msgid "Run"
msgstr "Kjør"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 192
#: rc.cpp:7770
#, no-c-format
msgid "Main pr&ogram"
msgstr "H&ovedprogram"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 200
#: rc.cpp:7773
#, fuzzy, no-c-format
msgid "Selected wi&ndow"
msgstr "&Valgt vindu"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 210
#: rc.cpp:7776
#, fuzzy, no-c-format
msgid "R&un applications in terminal"
msgstr "Kjør programmer i &terminal"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 213
#: rc.cpp:7779
#, no-c-format
msgid ""
"Check this if you want your applications to be opened in terminal window."
msgstr ""
"Kryss av her om du vil at programmene dine skal åpnes i et terminalvindu."
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 221
#: rc.cpp:7782
#, fuzzy, no-c-format
msgid "Enable &debugger floating toolbar"
msgstr "Bruk &flytende verktøylinje for feilsøkeren"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 224
#: rc.cpp:7785
#, no-c-format
msgid "Check this if you want to control the debugger via a floating toolbar."
msgstr "Kryss av her om du vil styre feilsøkeren via en flytende verktøylinje"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 232
#: rc.cpp:7788
#, no-c-format
msgid "Show &constants in the debugger"
msgstr "Vis &konstanter i feilsøkeren"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 235
#: rc.cpp:7791
#, no-c-format
msgid ""
"Check this if you want the debugger to show constants (with many constants this "
"may be slow)."
msgstr ""
"Kryss av her om du vil at feilsøkeren skal vise konstanter. (Med mange "
"konstanter kan dette bli langsomt.)"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 243
#: rc.cpp:7794
#, no-c-format
msgid "Trace &into Ruby libraries"
msgstr "Spor &inn i Ruby-biblioteker"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 246
#: rc.cpp:7797
#, no-c-format
msgid "Trace through the Ruby code installed under sitedir in the debugger"
msgstr "Spor gjennom Ruby-kode som er installert under sitedir i feilsøkeren"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 262
#: rc.cpp:7800
#, no-c-format
msgid "Character Coding"
msgstr "Tegnkoding"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 273
#: rc.cpp:7803
#, no-c-format
msgid "ASCII"
msgstr "ASCII"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 284
#: rc.cpp:7806
#, no-c-format
msgid "EUC"
msgstr "EUC"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 295
#: rc.cpp:7809
#, no-c-format
msgid "S&JIS"
msgstr "S&JIS"
#. i18n: file ./languages/ruby/rubyconfigwidgetbase.ui line 306
#: rc.cpp:7812
#, no-c-format
msgid "UTF-&8"
msgstr "UTF-&8"
#. i18n: file ./languages/ruby/app_templates/kxt/appview_base.ui line 16
#: rc.cpp:7824
#, no-c-format
msgid "%{APPNAMESC}_base"
msgstr "%{APPNAMESC}_base"
#. i18n: file ./languages/ada/configproblemreporter.ui line 24
#: rc.cpp:7830 rc.cpp:8188 rc.cpp:8194
#, no-c-format
msgid "&Enable background parsing"
msgstr "&Slå på tolking i bakgrunn"
#. i18n: file ./languages/ada/addclassdlg.ui line 16
#: rc.cpp:7833
#, no-c-format
msgid "Add Class"
msgstr "Legg til klasse"
#. i18n: file ./languages/ada/addclassdlg.ui line 30
#: rc.cpp:7836
#, no-c-format
msgid "&Implements"
msgstr "&Implementerer"
#. i18n: file ./languages/ada/addclassdlg.ui line 38
#: rc.cpp:7839
#, no-c-format
msgid "&Class"
msgstr "&Klasse"
#. i18n: file ./languages/ada/addclassdlg.ui line 72
#: rc.cpp:7842
#, no-c-format
msgid "&Abstract"
msgstr "&Abstrakt"
#. i18n: file ./languages/ada/addclassdlg.ui line 80
#: rc.cpp:7845
#, no-c-format
msgid "&Interface"
msgstr "&Grensesnitt"
#. i18n: file ./languages/ada/addclassdlg.ui line 117
#: rc.cpp:7851
#, no-c-format
msgid "&Public"
msgstr "&Public"
#. i18n: file ./languages/ada/addclassdlg.ui line 128
#: rc.cpp:7854
#, no-c-format
msgid "P&rotected"
msgstr "P&rotected"
#. i18n: file ./languages/ada/addclassdlg.ui line 136
#: rc.cpp:7857
#, no-c-format
msgid "Pri&vate"
msgstr "Pri&vate"
#. i18n: file ./languages/ada/addclassdlg.ui line 146
#: rc.cpp:7860
#, no-c-format
msgid "&Final"
msgstr "&Final"
#. i18n: file ./languages/ada/addclassdlg.ui line 170
#: rc.cpp:7863
#, no-c-format
msgid "&Extends:"
msgstr "&Extends:"
#. i18n: file ./languages/ada/addclassdlg.ui line 202
#: rc.cpp:7869
#, no-c-format
msgid "&Source path:"
msgstr "&Kildesti:"
#. i18n: file ./languages/ada/addclassdlg.ui line 227
#: rc.cpp:7875
#, no-c-format
msgid "&Create default constructor"
msgstr "&Opprett standardkonstruktør"
#. i18n: file ./languages/ada/addclassdlg.ui line 238
#: rc.cpp:7878
#, no-c-format
msgid "Create &main method"
msgstr "Opprett &main-metode"
#. i18n: file ./languages/ada/addclassdlg.ui line 248
#: rc.cpp:7881
#, no-c-format
msgid "&Documentation"
msgstr "&Dokumentasjon"
#. i18n: file ./languages/ada/addclassdlg.ui line 269
#: rc.cpp:7887
#, no-c-format
msgid "LGPL"
msgstr "LGPL"
#. i18n: file ./languages/ada/addclassdlg.ui line 274
#: rc.cpp:7890
#, no-c-format
msgid "GPL"
msgstr "GPL"
#. i18n: file ./languages/ada/addclassdlg.ui line 279
#: rc.cpp:7893
#, no-c-format
msgid "QPL"
msgstr "QPL"
#. i18n: file ./languages/sql/sqlconfigwidget.ui line 30
#: rc.cpp:7908
#, no-c-format
msgid "Database Name"
msgstr "Databasenavn"
#. i18n: file ./languages/sql/sqlconfigwidget.ui line 38
#: rc.cpp:7911
#, no-c-format
msgid "Host"
msgstr "Vert"
#. i18n: file ./languages/sql/sqlconfigwidget.ui line 46
#: rc.cpp:7914
#, no-c-format
msgid "Port"
msgstr "Port"
#. i18n: file ./languages/sql/sqlconfigwidget.ui line 54
#: rc.cpp:7917
#, no-c-format
msgid "Username"
msgstr "Brukernavn"
#. i18n: file ./languages/sql/sqlconfigwidget.ui line 62
#: rc.cpp:7920
#, no-c-format
msgid "Password"
msgstr "Passord"
#. i18n: file ./languages/sql/sqlconfigwidget.ui line 86
#: rc.cpp:7923
#, no-c-format
msgid "<i>Warning:</i> password will be saved with weak encryption."
msgstr "<i>Advarsel</i>: Passordet blir lagret med svak kryptering."
#. i18n: file ./languages/sql/sqlconfigwidget.ui line 127
#: rc.cpp:7929
#, no-c-format
msgid "&Test"
msgstr "&Test"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 16
#: rc.cpp:7932
#, no-c-format
msgid "Ftnchek Options"
msgstr "Ftnchek-valg"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 37
#: rc.cpp:7935
#, no-c-format
msgid "&1"
msgstr "&1"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 48
#: rc.cpp:7938
#, no-c-format
msgid "&External subprograms without definition"
msgstr "&Eksterne subprogrammer uten definisjon"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 56
#: rc.cpp:7941
#, no-c-format
msgid "&Divisions"
msgstr "Av&delinger"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 64
#: rc.cpp:7944
#, no-c-format
msgid "&Identifiers without explicit type"
msgstr "&Identifikatorer uten eksplisitt type"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 72
#: rc.cpp:7947
#, no-c-format
msgid "&Assume functions have no side effects"
msgstr "&Anta at funksjoner ikke har bivirkninger"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 97
#: rc.cpp:7950
#, no-c-format
msgid "Ar&guments:"
msgstr "Ar&gumenter:"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 108
#: parts/snippet/snippet_widget.cpp:142 parts/snippet/snippet_widget.cpp:144
#: parts/snippet/snippet_widget.cpp:253 parts/snippet/snippet_widget.cpp:447
#: parts/snippet/snippet_widget.cpp:454 parts/snippet/snippet_widget.cpp:961
#: parts/snippet/snippetitem.h:54 rc.cpp:7953 rc.cpp:7959 rc.cpp:7977
#: rc.cpp:7983 rc.cpp:7992 rc.cpp:8004
#, no-c-format
msgid "All"
msgstr "Alle"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 119
#: rc.cpp:7956 rc.cpp:7962 rc.cpp:7971 rc.cpp:7986 rc.cpp:7995 rc.cpp:8007
#, no-c-format
msgid "Only the following:"
msgstr "Bare følgende:"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 243
#: rc.cpp:7965
#, no-c-format
msgid "Common &blocks:"
msgstr "Common-&blokker:"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 256
#: rc.cpp:7968
#, no-c-format
msgid "&2"
msgstr "&2"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 278
#: rc.cpp:7974
#, no-c-format
msgid "&Truncation and roundoff errors:"
msgstr "&Trunkerings- og avrundingsfeil:"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 297
#: rc.cpp:7980
#, no-c-format
msgid "&Use of variables:"
msgstr "Br&uk av variabler:"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 406
#: rc.cpp:7989
#, no-c-format
msgid "&3"
msgstr "&3"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 513
#: rc.cpp:7998
#, no-c-format
msgid "Fortran 77 language &extensions:"
msgstr "Utvid&elser til Fortran 77:"
#. i18n: file ./languages/fortran/ftnchekconfigwidgetbase.ui line 524
#: rc.cpp:8001
#, no-c-format
msgid "Other &portability warnings:"
msgstr "Andre advarsler om &portabilitet:"
#. i18n: file ./languages/php/phpnewclassdlgbase.ui line 95
#: rc.cpp:8025
#, no-c-format
msgid "Class &template:"
msgstr "Klasse&mal:"
#. i18n: file ./languages/php/phpnewclassdlgbase.ui line 163
#: rc.cpp:8037
#, no-c-format
msgid ""
"<?php\n"
"if (!defined(\"FILENAME\")){\n"
"define(\"FILENAME\",0);\n"
"/*\n"
"* @author AUTHOR\n"
"*/\n"
"\n"
"class CLASSNAME extends BASECLASS {\n"
" //constructor\n"
" function CLASSNAME(){\n"
" BASECLASS::BASECLASS();\n"
" }\n"
" }\n"
"}\n"
"?>"
msgstr ""
"<?php\n"
"if (!defined(\"FILENAME\")){\n"
"define(\"FILENAME\",0);\n"
"/*\n"
"* @author AUTHOR\n"
"*/\n"
"\n"
"class CLASSNAME extends BASECLASS {\n"
" //constructor\n"
" function CLASSNAME(){\n"
" BASECLASS::BASECLASS();\n"
" }\n"
" }\n"
"}\n"
"?>"
#. i18n: file ./languages/php/phpinfodlg.ui line 16
#: rc.cpp:8054
#, no-c-format
msgid "PHP Information"
msgstr "PHP-informasjon"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 16
#: rc.cpp:8060
#, no-c-format
msgid "PHP Options"
msgstr "PHP-valg"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 31
#: rc.cpp:8063
#, no-c-format
msgid "Genera&l"
msgstr "Genere&lt"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 42
#: rc.cpp:8066
#, no-c-format
msgid "&Startup"
msgstr "Opp&start"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 53
#: rc.cpp:8069
#, no-c-format
msgid "Use current file in editor"
msgstr "Bruk gjeldende fil i redigereren"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 67
#: rc.cpp:8072
#, no-c-format
msgid "Use &this file as default:"
msgstr "Bruk denne fila som s&tandard:"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 85
#: rc.cpp:8075
#, no-c-format
msgid "Code Help"
msgstr "Kodehjelp"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 96
#: rc.cpp:8078
#, no-c-format
msgid "&Enable code completion"
msgstr "Slå på kod&efullføring"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 104
#: rc.cpp:8081
#, no-c-format
msgid "Enable code &hinting"
msgstr "Slå på kode&tips"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 114
#: rc.cpp:8084
#, no-c-format
msgid "Parser"
msgstr "Tolker"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 125
#: rc.cpp:8087
#, no-c-format
msgid "PHP &include path:"
msgstr "&Inkluder-sti for PHP:"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 141
#: rc.cpp:8090
#, no-c-format
msgid "Ena&ble realtime parser"
msgstr "Slå &på sanntidstolker"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 189
#: rc.cpp:8093
#, no-c-format
msgid "In&vocation"
msgstr "Opp&start"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 200
#: rc.cpp:8096
#, fuzzy, no-c-format
msgid "Please select how TDevelop should execute your scripts."
msgstr "Velg hvordan KDevelop skal kjøre skriptene dine."
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 208
#: rc.cpp:8099
#, no-c-format
msgid "Invocation Mode"
msgstr "Oppstartsmodus"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 222
#: rc.cpp:8102
#, no-c-format
msgid "Ca&lling the PHP interpreter directly"
msgstr "Ka&ller PHP-tolkeren direkte"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 231
#: rc.cpp:8105
#, no-c-format
msgid ""
"<font size=\"+1\">The php executable is called directly. Ideal for developers "
"who want to develop terminal or graphical applications in PHP. \n"
"You need a correctly installed php cgi version.</font>"
msgstr ""
"<font size=\"+1\">php-programmet kalles direkte. Ideelt for utviklere som vil "
"lage grafiske eller terminalprogrammer i PHP.\n"
"Du trenger en korrekt installert cgi-versjon av php.</font>"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 246
#: rc.cpp:8109
#, no-c-format
msgid "Using an &existing webserver (local or remote)"
msgstr "Bruker &en eksisterende nett-tjener (lokal eller fjern)"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 255
#: rc.cpp:8112
#, no-c-format
msgid ""
"<font size=\"+1\">Uses an existing webserver. The pages are previewed in \n"
"the internal web browser. Please make sure that the webserver was compiled with "
"PHP support.</font>"
msgstr ""
"<font size=\"+1\">Bruker en eksisterende nett-tjener. Sidene forhåndsvises i\n"
"den interne nettleseren. Pass på at nett-tjeneren er kompilert med støtte for "
"PHP.</font>"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 289
#: rc.cpp:8116
#, no-c-format
msgid "&Webserver"
msgstr "&Nett-tjener"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 300
#: rc.cpp:8119
#, no-c-format
msgid "Pro&ject root URL on webserver:"
msgstr "Pros&jektets start-URL på nett-tjeneren:"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 335
#: rc.cpp:8122
#, no-c-format
msgid "&Shell"
msgstr "&Skall"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 346
#: rc.cpp:8125
#, no-c-format
msgid "PHP &executable:"
msgstr "PHP &programfil:"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 400
#: rc.cpp:8134
#, no-c-format
msgid "PHP &Ini File:"
msgstr "PHP &ini-file:"
#. i18n: file ./languages/php/phpconfigwidgetbase.ui line 449
#: rc.cpp:8140
#, no-c-format
msgid "Load &Zend extension:"
msgstr "Last inn &Zend-utvidelsen:"
#. i18n: file ./languages/kjssupport/subclassingdlgbase.ui line 16
#: languages/kjssupport/kjssupport_part.cpp:429 rc.cpp:8146
#, no-c-format
msgid "Implement Slots"
msgstr "Implementerer signalkontakter"
#. i18n: file ./languages/java/configproblemreporter.ui line 27
#: rc.cpp:8191
#, no-c-format
msgid "&Parsing"
msgstr "&Tolker"
#. i18n: file ./languages/java/configproblemreporter.ui line 100
#: rc.cpp:8200
#, no-c-format
msgid "&Special Headers"
msgstr "&Spesialhoder"
#. i18n: file ./vcs/subversion/subversiondiff.ui line 16
#: rc.cpp:8215
#, fuzzy, no-c-format
msgid "Subversion Diff"
msgstr "Subversion"
#. i18n: file ./vcs/subversion/svn_commitdlgbase.ui line 71
#: rc.cpp:8227
#, no-c-format
msgid "Keep Locks"
msgstr ""
#. i18n: file ./vcs/subversion/svn_commitdlgbase.ui line 108
#: rc.cpp:8236
#, fuzzy, no-c-format
msgid "Recursive"
msgstr "&Rekursivt"
#. i18n: file ./vcs/subversion/commitdlgbase.ui line 16
#: rc.cpp:8239
#, no-c-format
msgid "Log Message"
msgstr "Logg-melding"
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 16
#: rc.cpp:8248
#, fuzzy, no-c-format
msgid "Subversion Merge"
msgstr "Subversion meldinger"
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 27
#: rc.cpp:8251 rc.cpp:8357
#, fuzzy, no-c-format
msgid "Destination"
msgstr "Mål:"
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 38
#: rc.cpp:8254
#, fuzzy, no-c-format
msgid "Destination working path"
msgstr "Mål:"
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 53
#: rc.cpp:8257
#, fuzzy, no-c-format
msgid "Source 1"
msgstr "Kilde"
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 80
#: rc.cpp:8260 rc.cpp:8287
#, fuzzy, no-c-format
msgid "Number:"
msgstr "Navn:"
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 91
#: rc.cpp:8263 rc.cpp:8290
#, no-c-format
msgid "Keyword:"
msgstr ""
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 97
#: rc.cpp:8266 rc.cpp:8296 rc.cpp:8375 rc.cpp:8465
#, no-c-format
msgid "HEAD"
msgstr "HEAD"
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 102
#: rc.cpp:8269 rc.cpp:8299 rc.cpp:8378
#, no-c-format
msgid "BASE"
msgstr ""
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 107
#: rc.cpp:8272 rc.cpp:8302
#, no-c-format
msgid "COMMITTED"
msgstr ""
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 112
#: rc.cpp:8275 rc.cpp:8305
#, no-c-format
msgid "PREV"
msgstr ""
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 143
#: rc.cpp:8278 rc.cpp:8308
#, fuzzy, no-c-format
msgid "Source URL or working path:"
msgstr "&Kildesti:"
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 151
#: rc.cpp:8281 rc.cpp:8293
#, no-c-format
msgid "Specify revision as"
msgstr ""
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 161
#: rc.cpp:8284
#, fuzzy, no-c-format
msgid "Source 2"
msgstr "Kilde"
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 302
#: rc.cpp:8317
#, fuzzy, no-c-format
msgid "--force (Force to delete locally modified or unversioned items.)"
msgstr "Tvangs-fjern (slett lokalt endrede filer/ikke-versjonerte filer)"
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 310
#: rc.cpp:8320
#, fuzzy, no-c-format
msgid "--non-recursive"
msgstr "&Vær rekursiv"
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 318
#: rc.cpp:8323
#, no-c-format
msgid "--ignore-ancestry"
msgstr ""
#. i18n: file ./vcs/subversion/svn_mergeoptiondlgbase.ui line 335
#: rc.cpp:8326
#, no-c-format
msgid ""
"--dry-run (Only receive full result notification\n"
" without actually modifying working copy)"
msgstr ""
#. i18n: file ./vcs/subversion/subversionprojectwidget.ui line 16
#: rc.cpp:8330
#, no-c-format
msgid "New Subversion Project"
msgstr "Nytt Subversion-prosjekt"
#. i18n: file ./vcs/subversion/subversionprojectwidget.ui line 35
#: rc.cpp:8333
#, no-c-format
msgid "&Import address:"
msgstr "&Importadresse:"
#. i18n: file ./vcs/subversion/subversionprojectwidget.ui line 53
#: rc.cpp:8336
#, no-c-format
msgid "Create &Standard Directories (tags/trunk/branches/)?"
msgstr "Opprette &standardmapper (tagger/stamme/grener/)?"
#. i18n: file ./vcs/subversion/svnssltrustpromptbase.ui line 16
#: rc.cpp:8345
#, no-c-format
msgid "SSL Certificate Trust"
msgstr ""
#. i18n: file ./vcs/subversion/svn_copydlgwidget.ui line 16
#: rc.cpp:8348
#, fuzzy, no-c-format
msgid "Subversion Copy"
msgstr "Subversion"
#. i18n: file ./vcs/subversion/svn_copydlgwidget.ui line 84
#: rc.cpp:8360
#, no-c-format
msgid "Specify either the full repository URL or local working path"
msgstr ""
#. i18n: file ./vcs/subversion/svn_copydlgwidget.ui line 94
#: rc.cpp:8363
#, fuzzy, no-c-format
msgid "Requested Local Path"
msgstr "Virkelig sti"
#. i18n: file ./vcs/subversion/svn_copydlgwidget.ui line 102
#: rc.cpp:8366
#, fuzzy, no-c-format
msgid "Source Revision"
msgstr "Revisjon"
#. i18n: file ./vcs/subversion/svn_copydlgwidget.ui line 129
#: rc.cpp:8369
#, fuzzy, no-c-format
msgid "Specify by number:"
msgstr "S&pesifikator:"
#. i18n: file ./vcs/subversion/svn_copydlgwidget.ui line 137
#: rc.cpp:8372
#, fuzzy, no-c-format
msgid "Specify by keyword:"
msgstr "S&pesifikator:"
#. i18n: file ./vcs/subversion/svn_copydlgwidget.ui line 153
#: rc.cpp:8381
#, no-c-format
msgid "WORKING"
msgstr ""
#. i18n: file ./vcs/subversion/svn_copydlgwidget.ui line 178
#: kdevdesigner/designer/mainwindowactions.cpp:206 rc.cpp:8384
#, no-c-format
msgid "Source"
msgstr "Kilde"
#. i18n: file ./vcs/subversion/svn_copydlgwidget.ui line 197
#: rc.cpp:8387
#, no-c-format
msgid "Specify by the repository URL of this item"
msgstr ""
#. i18n: file ./vcs/subversion/svn_copydlgwidget.ui line 205
#: rc.cpp:8390
#, no-c-format
msgid "Specify by local path of this item"
msgstr ""
#. i18n: file ./vcs/subversion/svn_switchdlgbase.ui line 16
#: rc.cpp:8393
#, fuzzy, no-c-format
msgid "Subversion Switch"
msgstr "Subversion"
#. i18n: file ./vcs/subversion/svn_switchdlgbase.ui line 27
#: rc.cpp:8396
#, no-c-format
msgid "Non-recursive. (Switch its immediate children only)"
msgstr ""
#. i18n: file ./vcs/subversion/svn_switchdlgbase.ui line 108
#: rc.cpp:8405
#, fuzzy, no-c-format
msgid "Current Repository URL"
msgstr "Forbered CVS-arkiv"
#. i18n: file ./vcs/subversion/svn_switchdlgbase.ui line 124
#: rc.cpp:8408
#, no-c-format
msgid "Working copy to switch"
msgstr ""
#. i18n: file ./vcs/subversion/svn_switchdlgbase.ui line 140
#: rc.cpp:8411
#, no-c-format
msgid "Working Mode"
msgstr ""
#. i18n: file ./vcs/subversion/svn_switchdlgbase.ui line 151
#: rc.cpp:8414
#, fuzzy, no-c-format
msgid "svn switch"
msgstr "Rekursiv bytt"
#. i18n: file ./vcs/subversion/svn_switchdlgbase.ui line 159
#: rc.cpp:8417
#, fuzzy, no-c-format
msgid "svn switch --relocation"
msgstr "Gjenopprett &adresse"
#. i18n: file ./vcs/subversion/svn_switchdlgbase.ui line 169
#: rc.cpp:8420
#, fuzzy, no-c-format
msgid "New destination URL"
msgstr "Mål:"
#. i18n: file ./vcs/subversion/svn_logviewoptiondlgbase.ui line 16
#: vcs/subversion/subversion_core.cpp:300 rc.cpp:8423
#, fuzzy, no-c-format
msgid "Subversion Log View"
msgstr "Subversion"
#. i18n: file ./vcs/subversion/svn_logviewoptiondlgbase.ui line 35
#: rc.cpp:8429
#, no-c-format
msgid "Do not show logs before branching point"
msgstr ""
#. i18n: file ./vcs/subversion/svn_logviewoptiondlgbase.ui line 46
#: rc.cpp:8432
#, fuzzy, no-c-format
msgid "End Revision"
msgstr "Revisjon"
#. i18n: file ./vcs/subversion/svn_logviewoptiondlgbase.ui line 57
#: rc.cpp:8435 rc.cpp:8447
#, fuzzy, no-c-format
msgid "&By Revision Number"
msgstr "&Revisjon:"
#. i18n: file ./vcs/subversion/svn_logviewoptiondlgbase.ui line 65
#: rc.cpp:8438 rc.cpp:8450
#, no-c-format
msgid "B&y Revision Specifier"
msgstr ""
#. i18n: file ./vcs/subversion/svn_logviewoptiondlgbase.ui line 96
#: rc.cpp:8444
#, fuzzy, no-c-format
msgid "Start Revision"
msgstr "Revisjon"
#. i18n: file ./vcs/subversion/svn_co.ui line 24
#: rc.cpp:8453
#, no-c-format
msgid "Subversion Module Checkout"
msgstr "Sjekk ut modul fra Subversion"
#. i18n: file ./vcs/subversion/svn_co.ui line 43
#: rc.cpp:8456
#, no-c-format
msgid "Server Settings"
msgstr "Tjenerinnstillinger"
#. i18n: file ./vcs/subversion/svn_co.ui line 62
#: rc.cpp:8459
#, no-c-format
msgid "Checkout &from:"
msgstr "Sjekk ut &fra:"
#. i18n: file ./vcs/subversion/svn_co.ui line 96
#: rc.cpp:8462
#, no-c-format
msgid "&Revision:"
msgstr "&Revisjon:"
#. i18n: file ./vcs/subversion/svn_co.ui line 131
#: rc.cpp:8468
#, no-c-format
msgid "This Project has Standard &Trunk/Branches/Tags/Directories"
msgstr "Dette prosjektet har s&tandard mapper for stamme/grener/tagger"
#. i18n: file ./vcs/subversion/svn_co.ui line 186
#: rc.cpp:8477
#, no-c-format
msgid "Local Directory"
msgstr "Lokal mappe"
#. i18n: file ./vcs/subversion/svn_co.ui line 205
#: rc.cpp:8480
#, no-c-format
msgid "C&heckout in:"
msgstr "S&jekk ut i:"
#. i18n: file ./vcs/subversion/svn_co.ui line 239
#: rc.cpp:8483
#, no-c-format
msgid "&Name of the newly created directory:"
msgstr "&Navn på den nyopprettede mappa:"
#. i18n: file ./vcs/subversion/integrator/svnintegratordlgbase.ui line 55
#: rc.cpp:8492
#, fuzzy, no-c-format
msgid "&Do not do anything"
msgstr "Ikke gjør noe"
#. i18n: file ./vcs/subversion/integrator/svnintegratordlgbase.ui line 65
#: rc.cpp:8495 rc.cpp:8502
#, no-c-format
msgid ""
"Adds subversion menus to project.\n"
"\n"
"NOTE: Unless you import the project\n"
"out of tdevelop, you will not be able\n"
"to perform any subversion operations."
msgstr ""
#. i18n: file ./vcs/subversion/integrator/svnintegratordlgbase.ui line 80
#: rc.cpp:8509
#, fuzzy, no-c-format
msgid ""
"&Create a project tree and import new project into trunk, then checkout from "
"the repository"
msgstr "Opprett et prosjekttre og importer nytt prosjekt til stammen"
#. i18n: file ./vcs/subversion/integrator/svnintegratordlgbase.ui line 87
#: rc.cpp:8512 rc.cpp:8519
#, no-c-format
msgid ""
"Creates project, imports it into the subversion\n"
"repository and checks it out as a working copy.\n"
"\n"
"NOTE: The repository has to exist.\n"
"e.g. has been created with 'svnadmin'"
msgstr ""
#. i18n: file ./vcs/subversion/integrator/svnintegratordlgbase.ui line 103
#: rc.cpp:8526
#, no-c-format
msgid ""
"Example for the url (if /home/user/subversion is the subversion repository):\n"
"file:///home/user/subversion/mynewproject"
msgstr ""
#. i18n: file ./vcs/subversion/integrator/svnintegratordlgbase.ui line 122
#: rc.cpp:8530
#, no-c-format
msgid "Repository:"
msgstr "Arkiv:"
#. i18n: file ./vcs/subversion/integrator/svnintegratordlgbase.ui line 135
#: rc.cpp:8533
#, no-c-format
msgid ""
"Subversion repository location.\n"
"The repository has to exist -\n"
"e.g. has been created with 'svnadmin'"
msgstr ""
#. i18n: file ./vcs/subversion/integrator/svnintegratordlgbase.ui line 144
#: rc.cpp:8538
#, no-c-format
msgid ""
"Subversion repository location. This should include the subdirectory for the "
"project in the repository. The project subdirectory and further subdirectories "
"will be created. \n"
"\n"
"So for example if you give http://localhost/svn/projectname the following "
"directories will be created and the project imported into the trunk "
"subdirectory:\n"
"http://localhost/svn/projectname\n"
"http://localhost/svn/projectname/tags\n"
"http://localhost/svn/projectname/branches\n"
"http://localhost/svn/projectname/trunk"
msgstr ""
#. i18n: file ./vcs/perforce/integrator/pfintegratordlgbase.ui line 24
#: rc.cpp:8547 rc.cpp:8550
#, no-c-format
msgid "No options available for this VCS."
msgstr "Ingen valg tilgjengelige for denne VCS."
#. i18n: file ./vcs/cvsservice/checkoutdialogbase.ui line 24
#: rc.cpp:8553
#, no-c-format
msgid "CVS Server Configuration"
msgstr "CVS tjeneroppsett"
#. i18n: file ./vcs/cvsservice/checkoutdialogbase.ui line 46
#: rc.cpp:8559
#, no-c-format
msgid "&Local destination directory:"
msgstr "Lokal &målmappe:"
#. i18n: file ./vcs/cvsservice/checkoutdialogbase.ui line 86
#: rc.cpp:8562
#, no-c-format
msgid "&Server path (e.g. :pserver:marios@cvs.kde.org:/home/kde):"
msgstr "&Tjenersti (f.eks. :pserver:marios@cvs.kde.org:/home/kde):"
#. i18n: file ./vcs/cvsservice/checkoutdialogbase.ui line 101
#: rc.cpp:8565
#, no-c-format
msgid "Select Module"
msgstr "Velg modul"
#. i18n: file ./vcs/cvsservice/checkoutdialogbase.ui line 137
#: rc.cpp:8568 rc.cpp:8779 rc.cpp:8867
#, no-c-format
msgid "&Module:"
msgstr "&Modul:"
#. i18n: file ./vcs/cvsservice/checkoutdialogbase.ui line 156
#: rc.cpp:8571
#, no-c-format
msgid "&Tag/branch:"
msgstr "&Tag/gren:"
#. i18n: file ./vcs/cvsservice/checkoutdialogbase.ui line 195
#: rc.cpp:8574
#, no-c-format
msgid "&Prune directories"
msgstr "&Beskjær mapper"
#. i18n: file ./vcs/cvsservice/checkoutdialogbase.ui line 201
#: rc.cpp:8577
#, no-c-format
msgid "Creates subdirs if needed"
msgstr "Oppretter undermapper hvis det trengs"
#. i18n: file ./vcs/cvsservice/checkoutdialogbase.ui line 207
#: rc.cpp:8580
#, no-c-format
msgid "Module"
msgstr "Modul"
#. i18n: file ./vcs/cvsservice/checkoutdialogbase.ui line 218
#: rc.cpp:8583
#, no-c-format
msgid "Real Path"
msgstr "Virkelig sti"
#. i18n: file ./vcs/cvsservice/checkoutdialogbase.ui line 277
#: rc.cpp:8586
#, no-c-format
msgid "&Fetch Modules List"
msgstr "&Hent modulliste"
#. i18n: file ./vcs/cvsservice/checkoutdialogbase.ui line 283
#: rc.cpp:8589
#, no-c-format
msgid "Fetch modules list from server"
msgstr "Hent modul-liste fra tjener"
#. i18n: file ./vcs/cvsservice/checkoutdialogbase.ui line 286
#: rc.cpp:8592
#, no-c-format
msgid "Click to fetch modules list from server you specified"
msgstr "Trykk for å hente modul-lista fra den oppgitte tjeneren"
#. i18n: file ./vcs/cvsservice/releaseinputdialogbase.ui line 16
#: rc.cpp:8601
#, no-c-format
msgid "Update/Revert to Release/Branch/Date"
msgstr "Oppdater/reverser til utgave/gren/dato"
#. i18n: file ./vcs/cvsservice/releaseinputdialogbase.ui line 38
#: rc.cpp:8604
#, no-c-format
msgid "Revision"
msgstr "Revisjon"
#. i18n: file ./vcs/cvsservice/releaseinputdialogbase.ui line 52
#: rc.cpp:8607
#, no-c-format
msgid "&Most recent from current branch"
msgstr "&Nyeste fra gjeldende gren"
#. i18n: file ./vcs/cvsservice/releaseinputdialogbase.ui line 71
#: rc.cpp:8610
#, no-c-format
msgid "An arbitrary &revision/tag/branch:"
msgstr "En oppgitt &revisjon/tagg/gren:"
#. i18n: file ./vcs/cvsservice/releaseinputdialogbase.ui line 85
#: rc.cpp:8613
#, no-c-format
msgid "Type your release name here (leave empty for HEAD)"
msgstr "Oppgi utgavenavnet her (la det være tomt for HEAD)"
#. i18n: file ./vcs/cvsservice/releaseinputdialogbase.ui line 88
#: rc.cpp:8616
#, no-c-format
msgid ""
"Fill the field with the release or branch name (e.g. <i>"
"make_it_cool, tdevelop_alpha5, ...</i>)"
msgstr ""
"Fyll ut feltet med navnet på utgaven eller grenen (dvs. <i>"
"kuult_program, tdevelop_alfa5, … </i>)"
#. i18n: file ./vcs/cvsservice/releaseinputdialogbase.ui line 106
#: rc.cpp:8619
#, no-c-format
msgid "An arbitrary &date:"
msgstr "En angitt &dato:"
#. i18n: file ./vcs/cvsservice/releaseinputdialogbase.ui line 117
#: rc.cpp:8622
#, no-c-format
msgid "FIll the field with a date (e.g. <i>20030204</i>)"
msgstr "Fyll ut feltet med en dato(f.eks. <i>20030204</i>)"
#. i18n: file ./vcs/cvsservice/releaseinputdialogbase.ui line 129
#: rc.cpp:8625
#, no-c-format
msgid "Additional Options"
msgstr "Flere valg"
#. i18n: file ./vcs/cvsservice/releaseinputdialogbase.ui line 140
#: rc.cpp:8628
#, no-c-format
msgid "&Enforce even if the file has been locally modified (revert)"
msgstr "&Håndhev selv om fila er endret lokalt (reverser)"
#. i18n: file ./vcs/cvsservice/diffdialogbase.ui line 16
#: rc.cpp:8637
#, no-c-format
msgid "Choose Revisions to Diff"
msgstr "Velg revisjoner å sammenlikne"
#. i18n: file ./vcs/cvsservice/diffdialogbase.ui line 30
#: rc.cpp:8640
#, no-c-format
msgid "Build Difference Between"
msgstr "Bygg forskjellen mellom"
#. i18n: file ./vcs/cvsservice/diffdialogbase.ui line 49
#: rc.cpp:8643
#, no-c-format
msgid "Local copy and an arbitrary &revision:"
msgstr "Lokal kopi og en angitt &revisjon:"
#. i18n: file ./vcs/cvsservice/diffdialogbase.ui line 67
#: rc.cpp:8646
#, no-c-format
msgid "&Two arbitrary revisions/tags:"
msgstr "&To angitte revisjoner/tagger:"
#. i18n: file ./vcs/cvsservice/diffdialogbase.ui line 91
#: rc.cpp:8649
#, no-c-format
msgid "Revision A:"
msgstr "Revisjon A:"
#. i18n: file ./vcs/cvsservice/diffdialogbase.ui line 105
#: rc.cpp:8652
#, no-c-format
msgid "Second revision to compare (leave empty to diff against HEAD)"
msgstr "Andre revisjon å sammenlikne ( bruker HEAD hvis ikke oppgitt)"
#. i18n: file ./vcs/cvsservice/diffdialogbase.ui line 116
#: rc.cpp:8655
#, no-c-format
msgid "First revision to compare"
msgstr "Første revisjon å sammenlikne"
#. i18n: file ./vcs/cvsservice/diffdialogbase.ui line 132
#: rc.cpp:8658
#, no-c-format
msgid "Revision B:"
msgstr "Revisjon B:"
#. i18n: file ./vcs/cvsservice/diffdialogbase.ui line 142
#: rc.cpp:8661
#, no-c-format
msgid "Local cop&y and HEAD"
msgstr "Lokal kop&i og HEAD"
#. i18n: file ./vcs/cvsservice/diffdialogbase.ui line 150
#: rc.cpp:8664
#, no-c-format
msgid "Local copy a&nd BASE"
msgstr "Loka&l kopi og BASE "
#. i18n: file ./vcs/cvsservice/tagdialogbase.ui line 16
#: rc.cpp:8673
#, no-c-format
msgid "Tag Files on CVS Repository"
msgstr "Tagg filer i CVS-arkivet"
#. i18n: file ./vcs/cvsservice/tagdialogbase.ui line 38
#: rc.cpp:8676
#, no-c-format
msgid "Tag/Branch &name:"
msgstr "Tagg/gren-&navn:"
#. i18n: file ./vcs/cvsservice/tagdialogbase.ui line 56
#: rc.cpp:8679
#, no-c-format
msgid "Tag as &branch"
msgstr "Tagg som &gren"
#. i18n: file ./vcs/cvsservice/tagdialogbase.ui line 64
#: rc.cpp:8682
#, no-c-format
msgid "&Force"
msgstr "&Tving"
#. i18n: file ./vcs/cvsservice/commitdialogbase.ui line 16
#: rc.cpp:8691
#, no-c-format
msgid "Commit to Repository"
msgstr "Legg til i arkivet"
#. i18n: file ./vcs/cvsservice/commitdialogbase.ui line 30
#: rc.cpp:8694
#, no-c-format
msgid "&Message"
msgstr "&Melding"
#. i18n: file ./vcs/cvsservice/commitdialogbase.ui line 56
#: rc.cpp:8697
#, no-c-format
msgid "&Add to changelog:"
msgstr "&Legg til endringsloggen:"
#. i18n: file ./vcs/cvsservice/commitdialogbase.ui line 67
#: rc.cpp:8700
#, no-c-format
msgid "Change log filename path (relative to project directory)"
msgstr "Endre stinavn for loggfila (relativt til prosjektmappa)"
#. i18n: file ./vcs/cvsservice/commitdialogbase.ui line 70
#: rc.cpp:8703
#, no-c-format
msgid ""
"<b>Changelog filename path</b>"
"<br/>Insert here the Changelog filename you wish to use so that the message is "
"appended"
msgstr ""
"<b>Stinavn til fila med endringsloggen</b> "
"<br/>Oppgi her filnavnet til endringsloggen som skal brukes slik at meldinga "
"blir lagt til"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 16
#: rc.cpp:8712
#, no-c-format
msgid "CVS Options"
msgstr "CVS-innstillinger"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 27
#: rc.cpp:8715
#, no-c-format
msgid "Common Settings"
msgstr "Fellesinnstillinger"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 46
#: rc.cpp:8718
#, no-c-format
msgid "&Remote shell (CVS_RSH environment variable):"
msgstr "Fje&rnskall (miljøvariablen CVS_RSH):"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 57
#: rc.cpp:8721
#, no-c-format
msgid "sets the CVS_RSH variable"
msgstr "setter miljøvariabelen CVS_RSH"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 60
#: rc.cpp:8724
#, no-c-format
msgid ""
"Set this option to \"ssh\" to use ssh as remote shell for CVS. Note that you "
"need password-less login (see the ssh documentation for how to generate a "
"public/private key pair) otherwise CVS will just hang forever."
msgstr ""
"Oppgi «ssh» her for å bruke ssh som fjernskall for CVS. Merk at du trenger "
"passord-løs innlogging (se ssh-dokumentasjonen om hvordan du lager et "
"nøkkelpar), ellers vil CVS bare henge for alltid."
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 68
#: rc.cpp:8727
#, no-c-format
msgid "CVS server &location:"
msgstr "Adresse ti&l CVS-tjener:"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 86
#: rc.cpp:8730
#, no-c-format
msgid "When Updating"
msgstr "Under oppdatering"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 97
#: rc.cpp:8733
#, no-c-format
msgid "Create &new directories (if any)"
msgstr "Opprett &nye kataloger (hvis noen)"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 105
#: rc.cpp:8736
#, no-c-format
msgid "&Prune empty directories"
msgstr "&Beskjær tomme mapper"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 113
#: rc.cpp:8739
#, no-c-format
msgid "&Update subdirectories too"
msgstr "Oppdater &undermapper også"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 123
#: rc.cpp:8742
#, no-c-format
msgid "When Committing/Removing"
msgstr "Under Commit/Remove"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 134
#: rc.cpp:8745
#, no-c-format
msgid "&Be recursive"
msgstr "&Vær rekursiv"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 144
#: rc.cpp:8748
#, no-c-format
msgid "When Creating Diffs"
msgstr "Når differ blir laget"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 176
#: rc.cpp:8751
#, no-c-format
msgid "Use these e&xtra options:"
msgstr "Bruk disse e&kstravalgene:"
#. i18n: file ./vcs/cvsservice/cvsoptionswidgetbase.ui line 209
#: rc.cpp:8754
#, no-c-format
msgid "Con&text lines:"
msgstr "Kon&tekstlinjer:"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 17
#: rc.cpp:8757
#, no-c-format
msgid "This form allows you to create a CVS repository for your new project"
msgstr "Et CVS-arkiv for det nye prosjektet kan lages med dette skjemaet"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 34
#: rc.cpp:8760
#, no-c-format
msgid "Release &tag:"
msgstr "&Utgavetagg:"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 45
#: rc.cpp:8763
#, no-c-format
msgid "Enter the name of the repository"
msgstr "Skriv inn navnet på arkivet"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 49
#: rc.cpp:8766
#, no-c-format
msgid ""
"CVS Repository name goes here.\n"
"Most of the thime you'll just reuse the project name"
msgstr ""
"Her oppgis CVS arkivnavnet.\n"
"Som regel blir bare prosjektnavnet resirkulert"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 57
#: rc.cpp:8770 rc.cpp:8828
#, no-c-format
msgid "vendor"
msgstr "leverandør"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 60
#: rc.cpp:8773
#, no-c-format
msgid "Enter the vendor name"
msgstr "Oppgi leverandørnavnet"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 68
#: rc.cpp:8776
#, no-c-format
msgid "&Message:"
msgstr "&Melding:"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 90
#: rc.cpp:8782 rc.cpp:8840
#, no-c-format
msgid "&Vendor tag:"
msgstr "Le&verandør-tagg:"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 101
#: rc.cpp:8785
#, no-c-format
msgid "new project"
msgstr "nytt prosjekt"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 104
#: rc.cpp:8788
#, no-c-format
msgid "Repository creation message"
msgstr "Melding med oppretting av arkiv"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 112
#: rc.cpp:8791 rc.cpp:8855
#, no-c-format
msgid "start"
msgstr "start"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 115
#: rc.cpp:8794
#, no-c-format
msgid "Tag that will be associated with initial state"
msgstr "Tagg som blir tilordnet start-tilstanden"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 129
#: rc.cpp:8797
#, no-c-format
msgid "&Server path:"
msgstr "&Tjenersti:"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 140
#: rc.cpp:8800
#, no-c-format
msgid "Enter your CVS Root location"
msgstr "Oppgi hvor din CVS-rot er"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 144
#: rc.cpp:8803
#, no-c-format
msgid ""
"CVS Root location goes here, for example:"
"<ul>\n"
"<li>/home/cvsroot or</li>"
"<li>:pserver:me@localhost:/home/cvs</li></ul>"
msgstr ""
"CVS-rota oppgis her, for eksempel: "
"<ul>\n"
"<li>/home/cvsroot eller </li>li>:pserver:me@localhost:/home/cvs</li></ul>"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 158
#: rc.cpp:8807
#, no-c-format
msgid "CVS_&RSH:"
msgstr "CVS_&RSH:"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 172
#: rc.cpp:8810
#, no-c-format
msgid "ssh"
msgstr "ssh"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 184
#: rc.cpp:8813
#, no-c-format
msgid "Init &root"
msgstr "Forbered &rot"
#. i18n: file ./vcs/cvsservice/cvsformbase.ui line 187
#: rc.cpp:8816
#, no-c-format
msgid "Check if you defined a new CVS Root"
msgstr "Se etter om du anga en ny CVS-rot"
#. i18n: file ./vcs/cvsservice/integrator/initdlg.ui line 16
#: rc.cpp:8819
#, no-c-format
msgid "Choose Repository Location"
msgstr "Velg sted for arkivet"
#. i18n: file ./vcs/cvsservice/integrator/initdlg.ui line 35
#: rc.cpp:8822
#, no-c-format
msgid "&Repository location:"
msgstr "&Arkivsted:"
#. i18n: file ./vcs/cvsservice/integrator/integratordlgbase.ui line 27
#: rc.cpp:8825
#, no-c-format
msgid "Create module in the repository"
msgstr "Opprett modul i arkivet"
#. i18n: file ./vcs/cvsservice/integrator/integratordlgbase.ui line 57
#: rc.cpp:8831
#, no-c-format
msgid "&Init Local Repository..."
msgstr "&Initier lokalt arkiv …"
#. i18n: file ./vcs/cvsservice/integrator/integratordlgbase.ui line 90
#: rc.cpp:8834
#, no-c-format
msgid "Login to &Repository..."
msgstr "Logg inn til a&rkivet …"
#. i18n: file ./vcs/cvsservice/integrator/integratordlgbase.ui line 154
#: rc.cpp:8837
#, no-c-format
msgid "Mo&dule:"
msgstr "Mo&dul:"
#. i18n: file ./vcs/cvsservice/integrator/integratordlgbase.ui line 198
#: rc.cpp:8843
#, no-c-format
msgid "Re&lease tag:"
msgstr "Ut&gavetagg:"
#. i18n: file ./vcs/cvsservice/integrator/integratordlgbase.ui line 242
#: rc.cpp:8849 rc.cpp:8861
#, no-c-format
msgid "&Repository:"
msgstr "&Arkiv:"
#. i18n: file ./vcs/cvsservice/integrator/integratordlgbase.ui line 256
#: rc.cpp:8852
#, no-c-format
msgid "First Import"
msgstr "Første import"
#. i18n: file ./vcs/cvsservice/integrator/fetcherdlgbase.ui line 51
#: rc.cpp:8858
#, no-c-format
msgid "&Branch tag:"
msgstr "&Gren-tagging:"
#. i18n: file ./vcs/cvsservice/integrator/fetcherdlgbase.ui line 97
#: rc.cpp:8864
#, no-c-format
msgid "Fetch &List"
msgstr "Hent &liste"
#: _translatorinfo.cpp:1
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Bjørn Steensrud"
#: _translatorinfo.cpp:3
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "bjornst@powertech.no"
#: lib/widgets/ksavealldialog.cpp:53 lib/widgets/ksavealldialog.cpp:144
msgid "Save Modified Files?"
msgstr "Lagre endrede filer?"
#: lib/widgets/ksavealldialog.cpp:58 lib/widgets/ksavealldialog.cpp:151
msgid "The following files have been modified. Save them?"
msgstr "Følgende filer er blitt endret. Skal de lagres?"
#: lib/widgets/ksavealldialog.cpp:65
msgid "Save &Selected"
msgstr "Lagre &utvalgte"
#: lib/widgets/ksavealldialog.cpp:65
msgid "Saves all selected files"
msgstr "Lagrer alle markerte filer"
#: lib/widgets/ksavealldialog.cpp:66 lib/widgets/ksavealldialog.cpp:157
msgid "Save &None"
msgstr "Lagre &ingen"
#: lib/widgets/ksavealldialog.cpp:68 lib/widgets/ksavealldialog.cpp:159
msgid "Lose all modifications"
msgstr "Mist alle endringer"
#: lib/widgets/ksavealldialog.cpp:69 lib/widgets/ksavealldialog.cpp:160
msgid "Cancels the action"
msgstr "Avbryter handlingen"
#: lib/widgets/ksavealldialog.cpp:156
msgid "Save &All"
msgstr "Lagre &alt"
#: lib/widgets/ksavealldialog.cpp:156
msgid "Saves all modified files"
msgstr "Lagrer alle endrede filer"
#: lib/widgets/processwidget.cpp:230 parts/outputviews/makeitem.cpp:127
msgid "*** Exited with status: %1 ***"
msgstr "*** Avsluttet med status: %1 ***"
#: lib/widgets/processwidget.cpp:233
msgid "*** Exited normally ***"
msgstr "*** Avsluttet normalt ***"
#: lib/widgets/processwidget.cpp:239
msgid "*** Process aborted. Segmentation fault ***"
msgstr "*** Prosess avbrutt. Segmenteringsfeil **"
#: lib/widgets/processwidget.cpp:243
msgid "*** Process aborted ***"
msgstr "*** Prosess avbrutt ***"
#: lib/widgets/resizablecombo.cpp:63
msgid "Drag this to resize the combobox."
msgstr "Dra denne for å endre størrelse på kombinasjonsboksen."
#: lib/widgets/kdevhtmlpart.cpp:37
msgid "<b>Reload</b><p>Reloads the current document."
msgstr "<b>Last om</b><p>Laster det aktuelle dokumentet på nytt"
#: lib/widgets/kdevhtmlpart.cpp:40
msgid "<b>Stop</b><p>Stops the loading of current document."
msgstr "<b>Stopp<</b><p>Stopper innlatringav gjeldende dokument. "
#: lib/widgets/kdevhtmlpart.cpp:41
msgid "Duplicate Tab"
msgstr "Lag kopi av fane"
#: lib/widgets/kdevhtmlpart.cpp:43
msgid "<b>Duplicate window</b><p>Opens current document in a new window."
msgstr "<b>Dupliser vindu</b><p>Åpner gjeldende dokument i et nytt vindu."
#: lib/widgets/kdevhtmlpart.cpp:57
msgid ""
"<b>Back</b>"
"<p>Moves backwards one step in the <b>documentation</b> browsing history."
msgstr ""
"<b>Tilbake</b> "
"<p>Går ett steg tilbake i <b>dokumentasjonens</b>lese-historikk."
#: languages/cpp/app_templates/noatunui/plugin_impl.cpp:56
#: lib/widgets/kdevhtmlpart.cpp:64 lib/widgets/kdevhtmlpart.cpp:68
#: src/partcontroller.cpp:171 src/partcontroller.cpp:173
msgid "Forward"
msgstr "Forover"
#: lib/widgets/kdevhtmlpart.cpp:69
msgid ""
"<b>Forward</b>"
"<p>Moves forward one step in the <b>documentation</b> browsing history."
msgstr ""
"<b>Fram</b> "
"<p>Går ett steg fram i <b>dokumentasjonens</b>lese-historikk."
#: lib/widgets/kdevhtmlpart.cpp:99 parts/documentation/docutils.cpp:81
msgid "Open in New Tab"
msgstr "Åpne i en ny fane"
#: lib/widgets/kdevhtmlpart.cpp:100
msgid "<b>Open in new window</b><p>Opens current link in a new window."
msgstr "<b>Åpne i nytt vindu</b><p>Åpner gjeldende lenke i et nytt vindu."
#: lib/widgets/kdevtabwidget.cpp:38
msgid "Close &Others"
msgstr "Lukk &andre"
#: lib/widgets/flagboxes.cpp:98
msgid "Flags"
msgstr "Flagg"
#: lib/widgets/propeditor/pcheckbox.cpp:69
msgid "true"
msgstr "sann"
#: lib/widgets/propeditor/pcheckbox.cpp:69
msgid "false"
msgstr "usann"
#: lib/widgets/propeditor/pfontbutton.cpp:62
msgid " Bold"
msgstr " Halvfet"
#: lib/widgets/propeditor/pfontbutton.cpp:63
msgid " Italic"
msgstr " Kursiv"
#: kdevdesigner/designer/propertyeditor.cpp:1505
#: kdevdesigner/designer/propertyeditor.cpp:1523
#: kdevdesigner/designer/propertyeditor.cpp:1602
#: kdevdesigner/designer/propertyeditor.cpp:1613
#: lib/widgets/propeditor/propertymachinefactory.cpp:131
#: lib/widgets/propeditor/propertymachinefactory.cpp:138
msgid "x"
msgstr "x"
#: kdevdesigner/designer/propertyeditor.cpp:1507
#: kdevdesigner/designer/propertyeditor.cpp:1528
#: kdevdesigner/designer/propertyeditor.cpp:1604
#: kdevdesigner/designer/propertyeditor.cpp:1615
#: lib/widgets/propeditor/propertymachinefactory.cpp:132
#: lib/widgets/propeditor/propertymachinefactory.cpp:139
msgid "y"
msgstr "y"
#: lib/widgets/propeditor/propertymachinefactory.cpp:152
msgid "Minimum Expanding"
msgstr "Minste utvidelse"
#: lib/widgets/propeditor/propertymachinefactory.cpp:153
msgid "Ignored"
msgstr "Ignorert"
#: kdevdesigner/designer/propertyeditor.cpp:2171
#: kdevdesigner/designer/propertyeditor.cpp:2189
#: kdevdesigner/designer/propertyeditor.cpp:2239
#: lib/widgets/propeditor/propertymachinefactory.cpp:156
msgid "hSizeType"
msgstr "hSizeType"
#: lib/widgets/propeditor/propertymachinefactory.cpp:156
msgid "Horizontal Size Type"
msgstr "Vannrett størrelsestype"
#: kdevdesigner/designer/propertyeditor.cpp:2174
#: kdevdesigner/designer/propertyeditor.cpp:2191
#: kdevdesigner/designer/propertyeditor.cpp:2241
#: lib/widgets/propeditor/propertymachinefactory.cpp:157
msgid "vSizeType"
msgstr "vSizeType"
#: lib/widgets/propeditor/propertymachinefactory.cpp:157
msgid "Vertical Size Type"
msgstr "Loddrett størrelsestype"
#: lib/widgets/propeditor/propertymachinefactory.cpp:158
msgid "hStretch"
msgstr "hStretch"
#: lib/widgets/propeditor/propertymachinefactory.cpp:158
msgid "Horizontal Stretch"
msgstr "Vannrett strekk"
#: lib/widgets/propeditor/propertymachinefactory.cpp:159
msgid "vStretch"
msgstr "vStretch"
#: lib/widgets/propeditor/propertymachinefactory.cpp:159
msgid "Vertical Stretch"
msgstr "Loddrett strekk"
#: kdevdesigner/designer/propertyeditor.cpp:2380
#: lib/widgets/propeditor/propertymachinefactory.cpp:165
msgid "Arrow"
msgstr "Pil"
#: lib/widgets/propeditor/propertymachinefactory.cpp:166
msgid "Up Arrow"
msgstr "Pil opp"
#: kdevdesigner/designer/propertyeditor.cpp:2382
#: lib/widgets/propeditor/propertymachinefactory.cpp:167
msgid "Cross"
msgstr "Kryss"
#: kdevdesigner/designer/propertyeditor.cpp:2383
#: lib/widgets/propeditor/propertymachinefactory.cpp:168
msgid "Waiting"
msgstr "Venter"
#: kdevdesigner/designer/propertyeditor.cpp:2384
#: lib/widgets/propeditor/propertymachinefactory.cpp:169
msgid "iBeam"
msgstr "iBeam"
#: kdevdesigner/designer/propertyeditor.cpp:2385
#: lib/widgets/propeditor/propertymachinefactory.cpp:170
#, fuzzy
msgid "Size Vertical"
msgstr "Sett loddrett størrelse"
#: kdevdesigner/designer/propertyeditor.cpp:2386
#: lib/widgets/propeditor/propertymachinefactory.cpp:171
#, fuzzy
msgid "Size Horizontal"
msgstr "Sett vannrett størrelse"
#: kdevdesigner/designer/propertyeditor.cpp:2387
#: lib/widgets/propeditor/propertymachinefactory.cpp:172
msgid "Size Slash"
msgstr "Sett skrå størrelse"
#: kdevdesigner/designer/propertyeditor.cpp:2388
#: lib/widgets/propeditor/propertymachinefactory.cpp:173
msgid "Size Backslash"
msgstr "Sett venstre skråstørrelse"
#: kdevdesigner/designer/propertyeditor.cpp:2389
#: lib/widgets/propeditor/propertymachinefactory.cpp:174
msgid "Size All"
msgstr "Sett alle størrelser"
#: kdevdesigner/designer/propertyeditor.cpp:2392
#: lib/widgets/propeditor/propertymachinefactory.cpp:175
msgid "Blank"
msgstr "Tom"
#: kdevdesigner/designer/propertyeditor.cpp:2393
#: lib/widgets/propeditor/propertymachinefactory.cpp:176
#, fuzzy
msgid "Split Vertical"
msgstr "Del loddrett"
#: kdevdesigner/designer/propertyeditor.cpp:2394
#: lib/widgets/propeditor/propertymachinefactory.cpp:177
#, fuzzy
msgid "Split Horizontal"
msgstr "Del vannrett"
#: kdevdesigner/designer/propertyeditor.cpp:2395
#: lib/widgets/propeditor/propertymachinefactory.cpp:178
msgid "Pointing Hand"
msgstr "Pekende hånd"
#: kdevdesigner/designer/propertyeditor.cpp:2396
#: lib/widgets/propeditor/propertymachinefactory.cpp:179
msgid "Forbidden"
msgstr "Forbudt"
#: lib/widgets/propeditor/propertymachinefactory.cpp:180
#, fuzzy
msgid "What's this"
msgstr "Hva er dette?"
#: lib/widgets/propeditor/pstringlistedit.cpp:85
msgid "Ok"
msgstr "Ok"
#: lib/util/tdescriptactionmanager.cpp:98
msgid "Unable to get KScript Runner for type \"%1\"."
msgstr "Fant ikke KScript-kjøremodulen for typen «%1»."
#: lib/util/tdescriptactionmanager.cpp:98
msgid "KScript Error"
msgstr "KScript-feil"
#: lib/util/execcommand.cpp:52
msgid "Could not invoke \"%1\". Please make sure it is installed correctly"
msgstr "Klarte ikke starte «%1». Se etter at det er riktig installert"
#: lib/util/execcommand.cpp:53
msgid "Error Invoking Command"
msgstr "Feil ved start av kommando"
#: lib/util/execcommand.cpp:59
msgid "Command running..."
msgstr "Kommando kjører …"
#: lib/util/execcommand.cpp:60
msgid "Please wait until the \"%1\" command finishes."
msgstr "Vent til «%1»-kommandoen har fullført."
#: lib/cppparser/errors.cpp:23
msgid "Internal Error"
msgstr "Intern feil"
#: lib/cppparser/errors.cpp:24
msgid "Syntax Error before '%1'"
msgstr "Syntaksfeil før «%1»"
#: lib/cppparser/errors.cpp:25
msgid "Parse Error before '%1'"
msgstr "Tolkingsfeil før «%1»"
#: lib/cppparser/parser.cpp:140
msgid "<eof>"
msgstr "<eof>"
#: lib/cppparser/parser.cpp:321 lib/cppparser/parser.cpp:2699
#: lib/cppparser/parser.cpp:2923 lib/cppparser/parser.cpp:2929
msgid "expression expected"
msgstr "uttrykk forventet"
#: lib/cppparser/parser.cpp:583
msgid "Declaration syntax error"
msgstr "Syntaksfeil i deklarasjon"
#: lib/cppparser/parser.cpp:630 lib/cppparser/parser.cpp:2817
#: lib/cppparser/parser.cpp:3290
msgid "} expected"
msgstr "} forventet"
#: lib/cppparser/parser.cpp:671
msgid "namespace expected"
msgstr "navneområde forventet"
#: lib/cppparser/parser.cpp:675
msgid "{ expected"
msgstr "{ forventet"
#: lib/cppparser/parser.cpp:748 lib/cppparser/parser.cpp:3010
msgid "Namespace name expected"
msgstr "Navn på navneområde forventet"
#: lib/cppparser/parser.cpp:852
msgid "Need a type specifier to declare"
msgstr "Deklarasjon krever spesifisert type"
#: lib/cppparser/parser.cpp:934
msgid "expected a declaration"
msgstr "forventet en deklarasjon"
#: lib/cppparser/parser.cpp:1208 lib/cppparser/parser.cpp:2190
msgid "Constant expression expected"
msgstr "Forventet et konstant-uttrykk"
#: lib/cppparser/parser.cpp:1277 lib/cppparser/parser.cpp:1374
msgid "')' expected"
msgstr "Forventet «)»"
#: lib/cppparser/parser.cpp:1436 lib/cppparser/parser.cpp:1966
#: lib/cppparser/parser.cpp:2398
msgid "} missing"
msgstr "} mangler"
#: lib/cppparser/parser.cpp:2088
msgid "Member initializers expected"
msgstr "Medlemsinitieringer forventet"
#: lib/cppparser/parser.cpp:2249
msgid "Base class specifier expected"
msgstr "Baseklasse-spesifikasjon forventet"
#: lib/cppparser/parser.cpp:2272
msgid "Initializer clause expected"
msgstr "Initieringsklausul forventet"
#: lib/cppparser/parser.cpp:2313
msgid "Identifier expected"
msgstr "Idenifikator forventet"
#: lib/cppparser/parser.cpp:2343
msgid "Type id expected"
msgstr "Type-id forventet"
#: lib/cppparser/parser.cpp:2380
msgid "Class name expected"
msgstr "Klassenavn forventet"
#: lib/cppparser/parser.cpp:2662 lib/cppparser/parser.cpp:2842
#: lib/cppparser/parser.cpp:2880 lib/cppparser/parser.cpp:3352
msgid "condition expected"
msgstr "betingelse forventet"
#: lib/cppparser/parser.cpp:2669 lib/cppparser/parser.cpp:2690
#: lib/cppparser/parser.cpp:2849 lib/cppparser/parser.cpp:2859
msgid "statement expected"
msgstr "setning forventet"
#: lib/cppparser/parser.cpp:2725
msgid "for initialization expected"
msgstr "for-initiering forventet"
#: lib/cppparser/parser.cpp:3341
msgid "catch expected"
msgstr "catch forventet"
#: lib/cppparser/driver.cpp:386
#, c-format
msgid "Could not find include file %1"
msgstr "Kunne ikke finne inkluderingsfil %1"
#: parts/konsole/konsoleviewpart.cpp:38
msgid ""
"<b>Konsole</b>"
"<p>This window contains an embedded konsole window. It will try to follow you "
"when you navigate in the source directories"
msgstr ""
"<b>Konsole</b>"
"<p>Dette vinduet inneholder et innebygget konsole-vindu. Det vil forsøke å "
"følge deg når du navigerer i kildemappene"
#: parts/konsole/konsoleviewpart.cpp:44 parts/konsole/konsoleviewpart.cpp:49
msgid "Konsole"
msgstr "Konsole"
#: parts/konsole/konsoleviewpart.cpp:49
msgid "Embedded console window"
msgstr "Innebygget konsollvindu"
#: parts/fileview/filegroupswidget.cpp:44 parts/uimode/uichooser_part.cpp:27
msgid "User Interface"
msgstr "Brukergrensesnitt"
#: parts/snippet/snippet_widget.cpp:141
msgid "Add Group"
msgstr "Legg til gruppe"
#: buildtools/autotools/addtranslationdlg.cpp:42
#: parts/snippet/snippet_widget.cpp:145 parts/snippet/snippet_widget.cpp:256
#: parts/snippet/snippet_widget.cpp:535
msgid "Language:"
msgstr "Språk:"
#: parts/snippet/snippet_widget.cpp:168
msgid "Do you really want to remove this group and all its snippets?"
msgstr "Er du sikker på at du vil fjerne denne gruppa og alle dens kodebiter?"
#: parts/snippet/snippet_widget.cpp:206
msgid "Edit Snippet"
msgstr "Rediger bit"
#: parts/snippet/snippet_widget.cpp:252
msgid "Edit Group"
msgstr "Rediger gruppe"
#: parts/snippet/snippet_widget.cpp:554
msgid "Add Item..."
msgstr "Legg til element …"
#: parts/snippet/snippet_widget.cpp:555 parts/snippet/snippet_widget.cpp:566
msgid "Add Group..."
msgstr "Legg til gruppe …"
#: kdevdesigner/designer/hierarchyview.cpp:1050
#: kdevdesigner/designer/hierarchyview.cpp:1055
#: kdevdesigner/designer/mainwindow.cpp:1680
#: parts/documentation/bookmarkview.cpp:126
#: parts/snippet/snippet_widget.cpp:557 parts/snippet/snippet_widget.cpp:559
msgid "Edit..."
msgstr "Rediger …"
#: parts/snippet/snippet_part.cpp:47 parts/snippet/snippet_part.cpp:52
#: parts/snippet/snippet_part.cpp:100 parts/snippet/snippet_widget.cpp:564
msgid "Code Snippets"
msgstr "Kodebiter"
#: parts/snippet/snippet_widget.cpp:600
msgid "Please enter the value for <b>%1</b>:"
msgstr "Oppgi verdi for <b>%1</b>:"
#: parts/snippet/snippet_widget.cpp:672 parts/snippet/snippet_widget.cpp:801
msgid "Enter Values for Variables"
msgstr "Oppgi verdier for variable"
#: parts/snippet/snippet_widget.cpp:686
msgid "Enter the replacement values for these variables:"
msgstr "Oppgi erstatningsverdier for disse variablene:"
#: parts/snippet/snippet_widget.cpp:712 parts/snippet/snippet_widget.cpp:830
msgid ""
"Enable this to save the value entered to the right as the default value for "
"this variable"
msgstr ""
"Slå på dette for å lagre verdien oppgitt til høyre som standardverdi for denne "
"variablen"
#: parts/snippet/snippet_widget.cpp:713 parts/snippet/snippet_widget.cpp:831
msgid ""
"If you enable this option, the value entered to the right will be saved. If you "
"use the same variable later, even in another snippet, the value entered to the "
"right will be the default value for that variable."
msgstr ""
"Hvis dette slås på, blir verdien oppgitt til høyre lagret. Hvis den samme "
"variablen brukes igjen senere, tilmed i en annen kodebit, så blir denne verdien "
"brukt som standardverdi for den variablen."
#: parts/snippet/snippet_widget.cpp:814
msgid "Enter the replacement values for %1:"
msgstr "Oppgi erstatningsverdier for %1:"
#: parts/snippet/snippet_widget.cpp:820
msgid "Make value &default"
msgstr "Gjør ver&dien til standard"
#: parts/snippet/snippet_part.cpp:50
msgid "<b>Code Snippet</b><p>This is a list of available snippets."
msgstr "<b>Kodebiter</b><p>Dette er en liste over tilgjengelige biter."
#: parts/snippet/snippet_part.cpp:52
msgid "Insert a code snippet"
msgstr "Sett inn en kodebit"
#: parts/snippet/snippet_part.cpp:76
#, fuzzy
msgid "Show Snippet Tree"
msgstr "Kodebiter"
#: parts/snippet/snippet_part.cpp:84
msgid "SnippetPart"
msgstr "SnippetPart"
#: parts/snippet/snippet_part.cpp:85
#, fuzzy
msgid "SnippetPart for TDevelop"
msgstr "SnippetPart for KDevelop"
#: parts/snippet/snippet_part.cpp:87
msgid "(c) 2003"
msgstr "© 2003"
#: parts/filter/filterpart.cpp:40
msgid "Execute Command..."
msgstr "Urfør kommando ,,,"
#: parts/filter/filterpart.cpp:43
msgid "Execute shell command"
msgstr "Utfør skallkommando"
#: parts/filter/filterpart.cpp:44
msgid ""
"<b>Execute shell command</b>"
"<p>Executes a shell command and outputs its result into the current document."
msgstr ""
"<b>Utfør skallkommando</b> "
"<p>Utfører en skallkommando og setter inn resultatet i gjeldende dokument."
#: parts/filter/filterpart.cpp:46
msgid "Filter Selection Through Command..."
msgstr "Filtrer utvalget gjennom kommando …"
#: parts/filter/filterpart.cpp:49
msgid "Filter selection through a shell command"
msgstr "Filtrer utvalget gjennom en skallkommando"
#: parts/filter/filterpart.cpp:50
msgid ""
"<b>Filter selection through shell command</b>"
"<p>Filters selection through a shell command and outputs its result into the "
"current document."
msgstr ""
"<b>Filtrer utvalget gjennom skallkommando</b> "
"<p>Filtrerer utvalget gjennom en skallkommando og setter inn resultatet i "
"gjeldende dokument."
#: parts/filter/filterpart.cpp:96
msgid "Execute Command"
msgstr "Kjør kommando"
#: parts/filter/filterpart.cpp:142
msgid "Filter Selection Through Command"
msgstr "Filtrer utvalget gjennom kommando"
#: parts/filter/shellfilterdlg.cpp:122 parts/filter/shellinsertdlg.cpp:119
#, c-format
msgid "Process exited with status %1"
msgstr "Prosess avsluttet med status %1"
#: parts/filelist/filelist_widget.cpp:95
msgid "This file has unsaved changes."
msgstr "Det er endringer som ikke er lagret i denne fila."
#: parts/filelist/filelist_widget.cpp:98
msgid "This file has changed on disk since it was last saved."
msgstr "Denne fila er endret på disk siden sist den ble lagret."
#: parts/filelist/filelist_widget.cpp:101
msgid "Conflict: this file has changed on disk and has unsaved changes."
msgstr "Konflikt: denne fila er endret på disk og har ulagrede endringer."
#: parts/filelist/filelist_widget.cpp:229
msgid "Close Selected"
msgstr "Lukk valgt"
#: parts/filelist/filelist_widget.cpp:230
msgid "Save Selected"
msgstr "Lagre valgt"
#: parts/filelist/filelist_widget.cpp:231
msgid "Reload Selected"
msgstr "Last valgt inn på nytt"
#: parts/filelist/projectviewpart.cpp:260
#, fuzzy
msgid ""
"<b>View Session Toolbar</b>"
"<p>This allows to create and work with view sessions. A view session is a set "
"of open documents.</p>"
msgstr ""
"<b>Verktøylinje for prosjektvisning</b> "
"<p>Dette brukes til å opprette og arbeide med prosjektvisninger. En "
"prosjektvisning er et sett åpne dokumenter.</p>"
#: parts/filelist/projectviewpart.cpp:266
msgid "<b>File List</b><p>This is the list of opened files.</p>"
msgstr "<b>Filliste</b><p>Dette er lista over åpne filer.</p>"
#: parts/filelist/projectviewpart.cpp:270
msgid "Open files"
msgstr "Åpne filer"
#: parts/filelist/projectviewpart.cpp:278
#, fuzzy
msgid "Open Session..."
msgstr "Åpne med …"
#: parts/filelist/projectviewpart.cpp:282
#, fuzzy
msgid "Open Session"
msgstr "Økt"
#: parts/filelist/projectviewpart.cpp:284
#, fuzzy
msgid "Save Session"
msgstr "Økt"
#: parts/filelist/projectviewpart.cpp:286
#, fuzzy
msgid "New Session..."
msgstr "Ny klasse …"
#: parts/filelist/projectviewpart.cpp:288
#: parts/filelist/projectviewpart.cpp:292
#: parts/filelist/projectviewpart.cpp:294
#: parts/filelist/projectviewpart.cpp:296
#, fuzzy
msgid "Delete Session"
msgstr "Slett signal"
#: parts/filelist/projectviewpart.cpp:487
#, fuzzy
msgid "Save View Session As"
msgstr "Lagre prosjektvisning som"
#: parts/filelist/projectviewpart.cpp:487
#, fuzzy
msgid "Enter the name of the session:"
msgstr "Oppgi navn på visningen:"
#: parts/filelist/projectviewpart.cpp:494
#, fuzzy
msgid ""
"<qt>A view session named <b>%1</b> already exists."
"<br>Do you want to overwrite it?</qt>"
msgstr ""
"<qt>Det finnes fra før en prosjektvisning som heter <b>%1<b>. "
"<br>Vil du overskrive den?</qt>"
#: parts/filelist/projectviewpart.cpp:494 src/partcontroller.cpp:1124
msgid "Overwrite"
msgstr "Skriv over"
#: parts/quickopen/quickopen_part.cpp:58
msgid "Quick Open File..."
msgstr "Hurtigåpne fil …"
#: parts/quickopen/quickopen_part.cpp:61
msgid "Quick open file in project"
msgstr "Hurtigåpne fil i prosjektet"
#: parts/quickopen/quickopen_part.cpp:62
msgid ""
"<b>Quick open</b>"
"<p>Provides a file name input form with completion listbox to quickly open file "
"in a project."
msgstr ""
"<b>Hurtigåpne</b>"
"<p> Gir et skjema for å oppgi filnavn, med listeboks for fullføring, for å "
"kunne raskt åpne en fil i et prosjekt."
#: parts/quickopen/quickopen_part.cpp:64
msgid "Quick Open Class..."
msgstr "Hurtigåpne klasse …"
#: parts/quickopen/quickopen_part.cpp:67
msgid "Find class in project"
msgstr "Finn klasse i prosjekt"
#: parts/quickopen/quickopen_part.cpp:68
msgid ""
"<b>Find class</b>"
"<p>Provides a class name input form with completion listbox to quickly open a "
"file where the class is defined."
msgstr ""
"<b>Finn klasse</b>"
"<p> Gir et skjema for å oppgi klassenavn, med listeboks for fullføring, for å "
"kunne raskt åpne en fil der en klasse er angitt."
#: parts/quickopen/quickopen_part.cpp:70
msgid "Quick Open Method..."
msgstr "Hurtigåpne metode …"
#: parts/quickopen/quickopen_part.cpp:71
msgid "Quick open function in project"
msgstr "Hurtigåpne funksjon i prosjektet"
#: parts/quickopen/quickopen_part.cpp:73
msgid "Switch To..."
msgstr "Bytt til …"
#: parts/quickopen/quickopen_part.cpp:74
msgid "Switch to"
msgstr "Bytt til"
#: parts/quickopen/quickopen_part.cpp:75
msgid ""
"<b>Switch to</b>"
"<p>Prompts to enter the name of previously opened file to switch to."
msgstr ""
"<b>Bytt til</b> "
"<p>Spør etter navn på tidligere åpnet fil det skal byttes til."
#: parts/quickopen/quickopenfunctionchooseform.cpp:34
#, c-format
msgid "Select One Argument or File of Function %1"
msgstr "Velg et argument eller fil til funksjon %1"
#: parts/quickopen/quickopenclassdialog.cpp:42
msgid "Class &list:"
msgstr "Klasse&liste:"
#: parts/quickopen/quickopenclassdialog.cpp:81
#, c-format
msgid "Select The Location of Class %1"
msgstr ""
#: parts/quickopen/quickopenfunctiondialog.cpp:45
msgid "Function &name:"
msgstr "Funksjons&navn:"
#: parts/quickopen/quickopenfunctiondialog.cpp:46
msgid "Function &list:"
msgstr "Funksjons&liste:"
#: parts/quickopen/quickopenfunctiondialog.cpp:136
msgid "Error: cannot find matching name function."
msgstr "Feil: kan ikke finne funksjon som svarer til navnet."
#: parts/bookmarks/bookmarks_part.cpp:59
msgid ""
"<b>Bookmarks</b>"
"<p>The bookmark viewer shows all the source bookmarks in the project."
msgstr ""
"<b>Bokmerker</b> "
"<p>Bokmerkeviseren viser alle kildebokmerker i prosjektet."
#: parts/bookmarks/bookmarks_part.cpp:62
msgid "Source bookmarks"
msgstr "Kildebokmerker"
#: parts/bookmarks/bookmarks_part.cpp:558
msgid "Could not find file"
msgstr "Kunne ikke finne fil"
#: parts/bookmarks/bookmarks_widget.cpp:270
msgid ", line "
msgstr ", linje "
#: parts/bookmarks/bookmarks_widget.cpp:273
msgid "Remove This Bookmark"
msgstr "Fjern dette bokmerket"
#: parts/bookmarks/bookmarks_widget.cpp:277
msgid ", All"
msgstr ", Alle"
#: parts/bookmarks/bookmarks_widget.cpp:278
msgid "Remove These Bookmarks"
msgstr "Fjern disse bokmerkene"
#: parts/bookmarks/bookmarks_widget.cpp:283
msgid "Collapse All"
msgstr "Fold sammen alle"
#: parts/bookmarks/bookmarks_widget.cpp:284
msgid "Expand All"
msgstr "Fold ut alle"
#: parts/vcsmanager/vcsmanagerpart.cpp:60
msgid "Version Control"
msgstr "Versjonskontroll"
#: parts/vcsmanager/vcsmanagerprojectconfig.cpp:49
msgid ""
"_: No Version Control System\n"
"None"
msgstr "Ingen"
#: parts/diff/diffdlg.cpp:20
msgid "Difference Viewer"
msgstr "Forskjellsviser"
#: parts/diff/diffwidget.cpp:76 vcs/cvsservice/diffwidget.cpp:73
#, c-format
msgid "Show in %1"
msgstr "Vis i %1"
#: parts/diff/diffwidget.cpp:83 vcs/cvsservice/diffwidget.cpp:80
msgid "&Save As..."
msgstr "Lagre &som …"
#: parts/diff/diffwidget.cpp:88 vcs/cvsservice/diffwidget.cpp:85
msgid "Highlight Syntax"
msgstr "Syntaksmerking"
#: parts/diff/diffwidget.cpp:93 parts/diff/diffwidget.cpp:326
#: parts/outputviews/appoutputwidget.cpp:271
#, fuzzy
msgid "Hide view"
msgstr "Ny visning"
#: parts/diff/diffwidget.cpp:112 vcs/cvsservice/diffwidget.cpp:106
msgid "Unable to open file."
msgstr "Kan ikke åpne fil."
#: parts/diff/diffwidget.cpp:112 vcs/cvsservice/diffwidget.cpp:106
msgid "Diff Frontend"
msgstr "Diff brukerflate"
#: parts/diff/diffwidget.cpp:324 vcs/cvsservice/diffwidget.cpp:315
msgid "Display &Raw Output"
msgstr "Vis &rå utdata"
#: parts/diff/diffpart.cpp:52 vcs/clearcase/clearcasepart.cpp:105
msgid "Diff"
msgstr "Diff"
#: parts/diff/diffpart.cpp:53
msgid "Diff Output"
msgstr "Utdata fra diff"
#: parts/diff/diffpart.cpp:54
msgid ""
"<b>Difference viewer</b>"
"<p>Shows output of the diff format. Can utilize every installed component that "
"is able to show diff output. For example if you have Kompare installed, "
"Difference Viewer can use its graphical diff view."
msgstr ""
"<b>Forskjellsviser</b>"
"<p> Viser utdata fra diff. Kan bruke alle installerte komponenter som kan vise "
"diff-resultater. Hvis du for eksempel har Kompare installert, så kan "
"forskjellsviseren bruke den grafiske diff-visningen til Kompare."
#: parts/diff/diffpart.cpp:57
msgid "Output of the diff command"
msgstr "Utdata fra diff-kommandoen"
#: parts/diff/diffpart.cpp:60
msgid "Difference Viewer..."
msgstr "Forskjellsviser …"
#: parts/diff/diffpart.cpp:63
msgid "Difference viewer"
msgstr "Forskjellsviser"
#: parts/diff/diffpart.cpp:64
msgid "<b>Difference viewer</b><p>Shows the contents of a patch file."
msgstr "<b>Forskjellsviser</b><p>Viser innholdet i en lappefil."
#: parts/diff/diffpart.cpp:123
msgid "Difference to Disk File"
msgstr "Forskjell mot fil på disk"
#: parts/diff/diffpart.cpp:125
msgid ""
"<b>Difference to disk file</b>"
"<p>Shows the difference between the file contents in this editor and the file "
"contents on disk."
msgstr ""
"<b>Forskjell mot disk på fil</b>"
"<p>Viser forskjellen mellom filinnholdet i denne redigeringen og filinnholdet "
"på disk."
#: parts/diff/diffpart.cpp:168
msgid "Could not invoke the \"diff\" command."
msgstr "Kunne ikke starte «diff»-kommandoen."
#: parts/diff/diffpart.cpp:181
msgid "DiffPart: No differences found."
msgstr "DiffPart: Fant ingen forskjeller."
#: parts/diff/diffpart.cpp:185
msgid ""
"Diff command failed (%1):\n"
msgstr ""
"Diff-kommando mislyktes (%1):\n"
#: parts/diff/diffpart.cpp:240
msgid "Please Select Patch File"
msgstr "Velg lappefil"
#: parts/openwith/openwithpart.cpp:48
msgid "Open as UTF-8"
msgstr "Åpne som UTF-8"
#: parts/openwith/openwithpart.cpp:52
#, fuzzy
msgid "Open As"
msgstr "Åpne filer"
#: parts/openwith/openwithpart.cpp:53
#, fuzzy
msgid ""
"<b>Open As</b>"
"<p>Lists all encodings that can be used to open the selected file."
msgstr ""
"<b>Åpne med</b> "
"<p>Lister alle programmer som kan brukes til å åpne den valgte fila."
#: parts/openwith/openwithpart.cpp:82
msgid "Open With"
msgstr "Åpne med"
#: parts/openwith/openwithpart.cpp:83
msgid ""
"<b>Open With</b>"
"<p>Lists all applications that can be used to open the selected file."
msgstr ""
"<b>Åpne med</b> "
"<p>Lister alle programmer som kan brukes til å åpne den valgte fila."
#: parts/openwith/openwithpart.cpp:88
msgid "Open With..."
msgstr "Åpne med …"
#: parts/openwith/openwithpart.cpp:89
msgid ""
"<b>Open With...</b>"
"<p>Provides a dialog to choose the application to open the selected file."
msgstr ""
"<b>Åpne med …</b> "
"<p>Viser en dialog for å velge programmet som skal åpne den valgte fila."
#: parts/fileview/filetreewidget.cpp:207 parts/fileview/fileviewpart.cpp:68
#: parts/fileview/fileviewpart.cpp:81 parts/fileview/partwidget.cpp:48
#: parts/fileview/partwidget.cpp:49
msgid "File Tree"
msgstr "Fil-tre"
#: parts/fileview/fileviewpart.cpp:81
msgid "File tree view in the project directory"
msgstr "Filtrevisning i prosjektmappa"
#: parts/fileview/filegroupspart.cpp:48
msgid ""
"<b>File group view</b>"
"<p>The file group viewer shows all files of the project, in groups which can be "
"configured in project settings dialog, <b>File Groups</b> tab."
msgstr ""
"<b>Filgruppevisning</b> "
"<p>Filgruppeviseren viser alle filer i prosjektet, i grupper som kan settes opp "
"i dialogen for prosjektinnstillinger, fanen <b>Filgrupper</b>."
#: parts/fileview/filegroupspart.cpp:51 parts/fileview/filegroupspart.cpp:54
#: parts/fileview/filegroupswidget.cpp:228
#: parts/fileview/filegroupswidget.cpp:262
msgid "File Groups"
msgstr "Filgrupper"
#: parts/fileview/filegroupspart.cpp:51
msgid "File groups in the project directory"
msgstr "Filgrupper i prosjektmappa"
#: parts/fileview/partwidget.cpp:51
msgid ""
"<b>File tree</b>"
"<p>The file viewer shows all files of the project in a tree layout."
msgstr ""
"<b>Fil-tre</b> "
"<p>FIlviseren viser alle filer i prosjektet i tre-utforming."
#: parts/fileview/partwidget.cpp:70
msgid ""
"<p>Here you can enter a name filter to limit which files are <b>"
"not displayed</b>."
"<p>To clear the filter, toggle off the filter button to the left."
"<p>To reapply the last filter used, toggle on the filter button."
msgstr ""
"<p>Her kan det oppgis et navnefilter som kan begrense hvilke filer som <b>"
"ikke er vist</b>. "
"<p>Slå av filterknappen til vensgre for å tømme filteret. "
"<p>Slå på filterknappen for å bruke på nytt det siste filteret som er brukt."
#: parts/fileselector/fileselector_widget.cpp:228
#: parts/fileview/partwidget.cpp:75
msgid ""
"<p>This button clears the name filter when toggled off, or reapplies the last "
"filter used when toggled on."
msgstr "<p>Denne knappen slår av eller på navnefilteret."
#: parts/fileselector/fileselector_widget.cpp:355
#: parts/fileview/partwidget.cpp:104
msgid "Apply last filter (\"%1\")"
msgstr "Bruk siste filter (%1)"
#: parts/fileselector/fileselector_widget.cpp:366
#: parts/fileview/partwidget.cpp:109 parts/outputviews/appoutputwidget.cpp:265
msgid "Clear filter"
msgstr "Tøm filter"
#: parts/fileview/filegroupswidget.cpp:181
#: parts/fileview/filetreeviewwidgetimpl.cpp:40
msgid "Show Non Project Files"
msgstr "Vis filer ikke i prosjektet"
#: parts/fileview/filegroupswidget.cpp:183
#: parts/fileview/filetreeviewwidgetimpl.cpp:42
msgid "Hide Non Project Files"
msgstr "SKjul filer ikke i prosjektet"
#: parts/fileview/filegroupswidget.cpp:184
#: parts/fileview/filetreeviewwidgetimpl.cpp:43
msgid ""
"<b>Show non project files</b>"
"<p>Shows files that do not belong to a project in a file tree."
msgstr ""
"<b>Vis filer ikke i prosjektet</b> "
"<p>Viser i et fil-tre filer som ikke hører til et prosjekt."
#: parts/fileview/filetreeviewwidgetimpl.cpp:99
msgid "Reload Tree"
msgstr "Last inn tre på nytt"
#: parts/fileview/filetreeviewwidgetimpl.cpp:100
msgid "<b>Reload tree</b><p>Reloads the project files tree."
msgstr "<b>Last inn tre på nytt</b><p>Laster inn prosjektets fil-tre på nytt."
#: parts/fileview/filegroupsconfigwidget.cpp:75
msgid "Add File Group"
msgstr "Legg til filgruppe"
#: parts/fileview/filegroupsconfigwidget.cpp:88
msgid "Edit File Group"
msgstr "Rediger filgruppe"
#: parts/fileview/vcsfiletreewidgetimpl.cpp:206
msgid "Show VCS Fields"
msgstr "Vis VCS-felter"
#: parts/fileview/vcsfiletreewidgetimpl.cpp:208
msgid "Hide VCS Fields"
msgstr "Skjul VCS-felter"
#: parts/fileview/vcsfiletreewidgetimpl.cpp:209
msgid ""
"<b>Show VCS fields</b>"
"<p>Shows <b>Revision</b> and <b>Timestamp</b> for each file contained in VCS "
"repository."
msgstr ""
"<b>Vis VCS-felter</b> "
"<p>Viser <b>revisjon</b> og <b>tidsmerke</b> for hver fil som er lagret i "
"versjonskontrollsystemets lager. (VCS: Version Control System)."
#: parts/fileview/vcsfiletreewidgetimpl.cpp:213
msgid "Sync with Repository"
msgstr "Synkroniser med lager"
#: parts/fileview/vcsfiletreewidgetimpl.cpp:215
msgid ""
"<b>Sync with repository</b>"
"<p>Synchronize file status with remote repository."
msgstr ""
"<b>Synkroniser med lager</b> "
"<p>Synkroniser filstatus med nettverkslageret."
#: buildtools/qmake/qmakescopeitem.cpp:85
#: parts/fileview/filegroupswidget.cpp:42
msgid "Sources"
msgstr "Kilder"
#: buildtools/qmake/qmakescopeitem.cpp:121
#: parts/fileview/filegroupswidget.cpp:43
msgid "Translations"
msgstr "Oversettelser"
#: parts/fileview/filegroupswidget.cpp:45
msgid "Others"
msgstr "Andre"
#: parts/fileview/filegroupswidget.cpp:186
msgid "Display Location Column"
msgstr "Vis adressekolonne"
#: parts/fileview/filegroupswidget.cpp:188
msgid ""
"<b>Display the Location Column</b>"
"<p>Displays a column with the location of the files."
msgstr "<b>Vis adressekolonne</b> <p>Viser en kolonne med adressen til filene."
#: parts/fileview/filegroupswidget.cpp:230
msgid "Customize..."
msgstr "Tilpass …"
#: parts/fileview/filegroupswidget.cpp:231
msgid ""
"<b>Customize</b>"
"<p>Opens <b>Customize File Groups</b> dialog where the groups can be managed."
msgstr ""
"<b>TIlpass</b> "
"<p>Åpner dialogen <b>Tilpass filgrupper</b> der gruppene kan behandles."
#: parts/fileview/filegroupswidget.cpp:259
msgid "Customize File Groups"
msgstr "Tilpass filgrupper"
#: kdevdesigner/designer/outputwindow.cpp:86
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:220
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:232
#: parts/fileview/filegroupswidget.cpp:312
msgid "Location"
msgstr "Plassering"
#: parts/fileview/addfilegroupdlg.cpp:32 parts/grepview/grepdlg.cpp:95
msgid "&Pattern:"
msgstr "&Mønster:"
#: parts/appwizard/filepropspage.cpp:69
msgid "Header/Implementation file:"
msgstr "Hode/implementasjonsfil:"
#: parts/appwizard/importdlg.cpp:61
msgid "Choose directory to import"
msgstr "Velg mappe som skal importeres"
#: parts/appwizard/importdlg.cpp:111
msgid "You have to choose a directory."
msgstr "En mappe må velges."
#: parts/appwizard/importdlg.cpp:117
msgid "You have to choose a project name."
msgstr "Et prosjektnavn må velges."
#: parts/appwizard/importdlg.cpp:123
msgid "Your application name should only contain letters and numbers."
msgstr "Programnavnet bør bare inneholde bokstaver og tall."
#: parts/appwizard/importdlg.cpp:139
msgid "Cannot open project template."
msgstr "Kan ikke åpne prosjektmal."
#: parts/appwizard/appwizarddlg.cpp:1016 parts/appwizard/importdlg.cpp:152
#: src/projectmanager.cpp:375
msgid ""
"This is not a valid project file.\n"
"XML error in line %1, column %2:\n"
"%3"
msgstr ""
"Dette er ikke en gyldig prosjektfil.\n"
"XML-feil i linje %1, kolonne %2:\n"
"%3"
#: parts/appwizard/importdlg.cpp:193
msgid "Cannot write the project file."
msgstr "Kan ikke skrive til prosjektfila."
#: parts/appwizard/importdlg.cpp:553
msgid "Generate build system infrastrucure"
msgstr "Opprett infrastruktur for byggesystemet"
#: parts/appwizard/importdlg.cpp:567
msgid ""
"Project infrastrucure already exists in target directory.\n"
"Generate new project infrastructure and overwrite old?"
msgstr ""
"Infrastruktur for prosjektet finnes fra før i målmappa.\n"
"Skal ny infrastruktur bygges og skrive over den gamle?"
#: parts/appwizard/importdlg.cpp:567
msgid "Generate"
msgstr "Lage"
#: parts/appwizard/importdlg.cpp:567
msgid "Do Not Generate"
msgstr "Ikke lag"
#: parts/appwizard/appwizardpart.cpp:45
msgid "&New Project..."
msgstr "&Nytt prosjekt …"
#: parts/appwizard/appwizardpart.cpp:48
msgid "Generate a new project from a template"
msgstr "Opprett et nytt prosjekt fra en mal"
#: parts/appwizard/appwizardpart.cpp:49
msgid ""
"<b>New project</b>"
"<p>This starts KDevelop's application wizard. It helps you to generate a "
"skeleton for your application from a set of templates."
msgstr ""
"<b>Nytt prosjekt</b>"
"<p>Dette starter KDevelops programveiviser. Den hjelper til med å lage et "
"skjelett for programmet ut fra et sett maler."
#: parts/appwizard/appwizardpart.cpp:54
msgid "&Import Existing Project..."
msgstr "&Importer eksisterende prosjekt …"
#: parts/appwizard/appwizardpart.cpp:57
msgid "Import existing project"
msgstr "Importer eksisterende prosjekt"
#: parts/appwizard/appwizardpart.cpp:58
msgid ""
"<b>Import existing project</b>"
"<p>Creates a project file for a given directory."
msgstr ""
"<b>Importer eksisterende prosjekt</b>"
"<p>Oppretter en prosjektfil for en gitt mappe."
#: parts/appwizard/appwizarddlg.cpp:108
msgid "&Add to Favorites"
msgstr "&Legg til i Bokmerker"
#: parts/appwizard/appwizarddlg.cpp:111
msgid "&Remove Favorite"
msgstr "Fje&rn bokmerke"
#: parts/appwizard/appwizarddlg.cpp:288
msgid "Choose projects directory"
msgstr "Velg prosjektmappe"
#: parts/appwizard/appwizarddlg.cpp:338
msgid ""
"_: no version control system\n"
"None"
msgstr "Ingen"
#: parts/appwizard/appwizarddlg.cpp:387
msgid "Version Control System"
msgstr "Versjonskontroll-system"
#: parts/appwizard/appwizarddlg.cpp:458
msgid ""
"The directory you have chosen as the location for the project already exists."
msgstr "Den mappa du har valgt som hjemsted for prosjektet finnes fra før."
# | msgid "The directory you have chosen as the location for the project already exists."
#: parts/appwizard/appwizarddlg.cpp:467
#, fuzzy
msgid ""
"The directory you have chosen as the location for the project is not writeable."
msgstr "Den mappa du har valgt som hjemsted for prosjektet finnes fra før."
#: parts/appwizard/appwizarddlg.cpp:489
msgid "The template %1 cannot be opened."
msgstr "Malen %1 kan ikke åpnes."
#: parts/appwizard/appwizarddlg.cpp:648
msgid "The directory %1 cannot be created."
msgstr "Mappa %1 kan ikke opprettes."
#: parts/appwizard/appwizarddlg.cpp:667
msgid "The archive %1 cannot be opened."
msgstr "Arkivet %1 kan ikke åpnes"
#: parts/appwizard/appwizarddlg.cpp:685 parts/appwizard/appwizarddlg.cpp:827
msgid "The file %1 cannot be created."
msgstr "Fila %1 kan ikke opprettes."
#: parts/appwizard/appwizarddlg.cpp:693
msgid ""
"The directory above the chosen location does not exist and cannot be created."
msgstr "Mappa over det valgte stedet finnes ikke og kan ikke opprettes."
#: parts/appwizard/appwizarddlg.cpp:896
msgid "Template for .%1 Files"
msgstr "Mal for .%1-filer"
#: parts/appwizard/appwizarddlg.cpp:922
msgid "Set default project location to: %1?"
msgstr "Sett standard prosjektsted til: %1?"
#: kdevdesigner/designer/mainwindow.cpp:1336
#: parts/appwizard/appwizarddlg.cpp:923
msgid "New Project"
msgstr "Nytt prosjekt"
#: parts/appwizard/appwizarddlg.cpp:923
msgid "Set"
msgstr "Sett"
#: parts/appwizard/appwizarddlg.cpp:923
msgid "Do Not Set"
msgstr "Ikke sett"
#: parts/appwizard/appwizarddlg.cpp:949
msgid ""
"_: invalid location\n"
" (invalid)"
msgstr " (ugyldig)"
# | msgid " (dir/file already exist)"
#: parts/appwizard/appwizarddlg.cpp:951
#, fuzzy
msgid " (dir/file already exists)"
msgstr " (mappe/fil finnes fra før)"
#: parts/astyle/astyle_part.cpp:53
msgid "&Reformat Source"
msgstr "&Reformatter kildekode"
#: parts/astyle/astyle_part.cpp:55
msgid "Reformat source"
msgstr "Reformatter kildekode"
#: parts/astyle/astyle_part.cpp:56
msgid ""
"<b>Reformat source</b>"
"<p>Source reformatting functionality using <b>astyle</b> "
"library. Also available in <b>New Class</b> and <b>Subclassing</b> wizards."
msgstr ""
"<b>Reformatter kildekode</b> "
"<p>Funksjonalitet for omformattering av kildekode med <b>astyle</b>"
"-biblioteket. Finnes også i veiviserne <b>Ny klasse</b> og <b>Underklassing</b>"
"."
#: parts/astyle/astyle_part.cpp:59 parts/astyle/astyle_part.cpp:61
#: parts/astyle/astyle_part.cpp:410
#, fuzzy
msgid "Format files"
msgstr "Bunntekst-fil"
#: parts/astyle/astyle_part.cpp:62
#, fuzzy
msgid ""
"<b>Fomat files</b>"
"<p>Formatting functionality using <b>astyle</b> library. Also available in <b>"
"New Class</b> and <b>Subclassing</b> wizards."
msgstr ""
"<b>Reformatter kildekode</b> "
"<p>Funksjonalitet for omformattering av kildekode med <b>astyle</b>"
"-biblioteket. Finnes også i veiviserne <b>Ny klasse</b> og <b>Underklassing</b>"
"."
#: parts/astyle/astyle_part.cpp:67 parts/astyle/astyle_part.cpp:68
msgid "Formatting"
msgstr "Formaterer"
#: parts/astyle/astyle_part.cpp:402
#, fuzzy
msgid "Format selection"
msgstr "Formaterer"
#: parts/astyle/astyle_part.cpp:403
msgid "<b>Format</b><p>Formats the current selection, if possible"
msgstr ""
#: parts/astyle/astyle_part.cpp:411
#, fuzzy
msgid "<b>Format files</b><p>Formats selected files if possible"
msgstr ""
"<b>Meld inn fil(er)</b>"
"<p>Melder inn fil til arkivet hvis den er endret."
#: parts/astyle/astyle_part.cpp:523
#, c-format
msgid "Not able to write %1"
msgstr ""
#: parts/astyle/astyle_part.cpp:528
#, c-format
msgid "Not able to read %1"
msgstr ""
#: parts/astyle/astyle_part.cpp:534
#, fuzzy
msgid "Processed %1 files ending with extensions %2"
msgstr "Nytt fil&navn (med etternavn):"
#: parts/tools/toolsconfigwidget.cpp:130
msgid "An entry with this title exists already."
msgstr "Det finnes et element fra før med denne tittelen."
#: parts/tools/toolsconfigwidget.cpp:170
msgid "Add to Tools Menu"
msgstr "Legg til i verktøymenyen"
#: parts/tools/toolsconfigwidget.cpp:197
msgid "Add to File Context Menus"
msgstr "Legg til i fil-kontekstmenyer"
#: parts/tools/toolsconfigwidget.cpp:225
msgid "Add to Directory Context Menus"
msgstr "Legg til i mappe-kontekstmenyer"
#: parts/tools/tools_part.cpp:50
msgid "Tools Menu"
msgstr "Verktøy-menyen"
#: parts/tools/toolsconfig.cpp:40
msgid "&Applications:"
msgstr "Progr&ammer:"
#: parts/tools/toolsconfig.cpp:63
msgid "&Tools menu:"
msgstr "Verk&tøymeny:"
#: parts/tools/kapplicationtree.cpp:137
msgid "Known Applications"
msgstr "Kjente programmer"
#: parts/distpart/distpart_widget.cpp:134
msgid "Building Package"
msgstr "Bygger pakke"
#: parts/distpart/distpart_widget.cpp:145
#, c-format
msgid "Adding file: %1"
msgstr "Legger til fil: %1"
#: parts/distpart/distpart_widget.cpp:152
#, c-format
msgid "Archive made at: %1"
msgstr "Arkiv opprettet: %1"
#: parts/distpart/distpart_widget.cpp:152
msgid "Archive Done"
msgstr "Arkiv ferdig"
#: parts/distpart/distpart_widget.cpp:595
#, fuzzy, c-format
msgid "Remove %1"
msgstr "Fjer&n"
#: buildtools/qmake/trollprojectwidget.cpp:1796
#: buildtools/qmake/trollprojectwidget.cpp:1937
#: parts/distpart/distpart_widget.cpp:595
msgid "Remove File"
msgstr "Fjern fil"
#: parts/distpart/specsupport.cpp:78 parts/distpart/specsupport.cpp:177
msgid "You need to create a source archive first."
msgstr "Du må først lage et kildearkiv."
#: parts/distpart/distpart_part.cpp:48
msgid "Distribution && Publishing"
msgstr "Distribusjon og utgivelse"
#: parts/distpart/distpart_part.cpp:52
msgid "Make source and binary distribution"
msgstr "Lag kilde- og binær utgivelse"
#: parts/distpart/distpart_part.cpp:53
msgid ""
"<b>Project distribution & publishing</b>"
"<p>Helps users package and publish their software."
msgstr ""
"<b>Prosjektdistribusjon og utgivelse</b>"
"<p> Hjelper brukere med å pakke og gi ut deres programmer."
#: parts/distpart/distpart_part.cpp:56
msgid "Distribution & Publishing"
msgstr "Distribusjon og utgivelse"
#: parts/classview/classtoolwidget.cpp:37
msgid "Class Tool"
msgstr "Klasseverktøy"
#: parts/classview/viewcombos.cpp:121
msgid "(Global Namespace)"
msgstr "(Globalt navnerom)"
#: parts/classview/classtooldlg.cpp:45
msgid "Show parents"
msgstr "Vis foreldreklasser"
#: parts/classview/classtooldlg.cpp:51
msgid "Show children"
msgstr "Vis underklasser"
#: parts/classview/classtooldlg.cpp:57
msgid "Show clients"
msgstr "Vis klienter"
#: parts/classview/classtooldlg.cpp:63
msgid "Show suppliers"
msgstr "Viser leverandører"
#: parts/classview/classtooldlg.cpp:69
msgid "Show methods"
msgstr "Vis metoder"
#: parts/classview/classtooldlg.cpp:75
msgid "Show attributes"
msgstr "Vis attributter"
#: parts/classview/classtooldlg.cpp:80 parts/classview/classtooldlg.cpp:223
msgid ""
"_: member access\n"
"All"
msgstr "Alle"
#: parts/classview/classtooldlg.cpp:81 parts/classview/classtooldlg.cpp:225
msgid ""
"_: member access\n"
"Public"
msgstr "Offentlig"
#: parts/classview/classtooldlg.cpp:82 parts/classview/classtooldlg.cpp:227
msgid ""
"_: member access\n"
"Protected"
msgstr "Beskyttet"
#: parts/classview/classtooldlg.cpp:83 parts/classview/classtooldlg.cpp:229
msgid ""
"_: member access\n"
"Private"
msgstr "Privat"
#: parts/classview/classtooldlg.cpp:84 parts/classview/classtooldlg.cpp:231
msgid ""
"_: member access\n"
"Package"
msgstr "Pakke"
#: parts/classview/classtooldlg.cpp:287
msgid "Parents"
msgstr "Foreldre"
#: parts/classview/classtooldlg.cpp:291
msgid "Children"
msgstr "Barn"
#: parts/classview/classtooldlg.cpp:295
msgid "Clients"
msgstr "Klienter"
#: parts/classview/classtooldlg.cpp:299
msgid "Suppliers"
msgstr "Leverandører"
#: parts/classview/classtooldlg.cpp:303
msgid "%1 Methods"
msgstr "%1-metoder"
#: parts/classview/classtooldlg.cpp:307
msgid "%1 Attributes"
msgstr "%1-attributter"
#: parts/classview/classtooldlg.cpp:311
msgid "Class Tool Dialog"
msgstr "Dialog for klasseverktøy"
#: parts/classview/classtooldlg.cpp:324
msgid "%1 of Class %2"
msgstr "%1 i klasse %2"
#: parts/classview/digraphview.cpp:228
msgid ""
"You do not have 'dot' installed.\n"
"It can be downloaded from www.graphviz.org."
msgstr ""
"«dot» er ikke installert.\n"
"Det kan hentes fra www.graphviz.org."
#: parts/classview/navigator.cpp:113
msgid "Sync ClassView"
msgstr ""
#: parts/classview/navigator.cpp:116
#, fuzzy
msgid "Jump to next function"
msgstr "Hopp til neste treff"
#: parts/classview/navigator.cpp:120
msgid "Jump to previous function"
msgstr ""
#: parts/classview/hierarchydlg.cpp:52
#, fuzzy
msgid "Refresh"
msgstr "Lexkilder"
#: parts/classview/classviewwidget.cpp:69
msgid "Group by Directories"
msgstr "Grupper etter mapper"
#: parts/classview/classviewwidget.cpp:69
msgid "Plain List"
msgstr "Enkel liste"
#: parts/classview/classviewwidget.cpp:69
msgid "Java Like Mode"
msgstr "Java-liknende"
#: parts/classview/classviewwidget.cpp:70
msgid "View Mode"
msgstr "Visningstype"
#: parts/classview/classviewwidget.cpp:72
msgid ""
"<b>View mode</b>"
"<p>Class browser items can be grouped by directories, listed in a plain or java "
"like view."
msgstr ""
"<b>Visningstype</b> <b>Elementer i klassevisning kan grupperes etter mapper, "
"vises i en enkel liste eller en Java-liknende visning."
#: languages/cpp/cppsupportpart.cpp:296 languages/java/javasupportpart.cpp:160
#: parts/classview/classviewwidget.cpp:74
msgid "New Class..."
msgstr "Ny klasse …"
#: parts/classview/classviewwidget.cpp:76
msgid "<b>New class</b><p>Calls the <b>New Class</b> wizard."
msgstr "<b>Ny klasse</b><p>Kaller opp veiviseren <b>Ny klasse</b>."
#: parts/classview/classviewwidget.cpp:78
msgid "Create get/set Methods"
msgstr "Lag get/set-metoder"
#: parts/classview/classtreebase.cpp:55 parts/classview/classviewwidget.cpp:81
msgid "Add Method..."
msgstr "Legg til metode …"
#: parts/classview/classviewwidget.cpp:83
msgid "<b>Add method</b><p>Calls the <b>New Method</b> wizard."
msgstr "<b>Legg til metode</b><p>Kaller opp veiviseren <b>Ny metode</b>."
#: parts/classview/classtreebase.cpp:57 parts/classview/classviewwidget.cpp:84
msgid "Add Attribute..."
msgstr "Legg til attributt …"
#: parts/classview/classviewwidget.cpp:86
msgid "<b>Add attribute</b><p>Calls the <b>New Attribute</b> wizard."
msgstr "<b>Legg til attributt<b><p>Kaller opp veiviseren <b>Ny attributt</b>."
#: parts/classview/classviewwidget.cpp:88
msgid "Open Declaration"
msgstr "Åpne deklarasjon"
#: parts/classview/classviewwidget.cpp:90
msgid ""
"<b>Open declaration</b>"
"<p>Opens a file where the selected item is declared and jumps to the "
"declaration line."
msgstr ""
"<b>Åpne deklarasjon</b> "
"<p>Åpner en fil der det valgte elementet er deklarert og hopper til "
"deklarasjonslinja."
#: parts/classview/classviewwidget.cpp:91
msgid "Open Implementation"
msgstr "Åpne implementasjon"
#: parts/classview/classviewwidget.cpp:93
msgid ""
"<b>Open implementation</b>"
"<p>Opens a file where the selected item is defined (implemented) and jumps to "
"the definition line."
msgstr ""
"<B>Åpne implementasjon</b> "
"<p>Åpner en fil der det valgte elementet er angitt (implementert) og hopper til "
"definisjonslinja."
#: parts/classview/classviewwidget.cpp:95
#, fuzzy
msgid "Follow Editor"
msgstr "Vi&s redigerere"
#: parts/classview/classviewpart.cpp:159
msgid "Class Browser"
msgstr "Klasse viser"
#: parts/classview/classviewpart.cpp:160
msgid "Classes"
msgstr "Klasser"
#: parts/classview/classviewpart.cpp:160
msgid "Class browser"
msgstr "Klasseviser"
#: parts/classview/classviewpart.cpp:161
msgid ""
"<b>Class browser</b>"
"<p>The class browser shows all namespaces, classes and namespace and class "
"members in a project."
msgstr ""
"<b>Klasseviser</b> "
"<p>Klasseviseren viser alle navnerom, klasser og medlemmer i navnerom og "
"klasser i et prosjekt."
#: parts/classview/classviewpart.cpp:198
msgid "Functions Navigation"
msgstr "Funksjonsnavigering"
#: parts/classview/classviewpart.cpp:203
msgid "Functions in file"
msgstr "Funksjoner i fil"
#: parts/classview/classviewpart.cpp:204
msgid ""
"<b>Function navigator</b>"
"<p>Navigates over functions contained in the file."
msgstr ""
"<b>Funksjonsnavigering</b> "
"<p>Navigerer over funksjoner som finnes i fila."
#: parts/classview/classviewpart.cpp:208
#, fuzzy
msgid "Focus Navigator"
msgstr "Funksjonsnavigering"
#: parts/classview/classviewpart.cpp:212
msgid "Class Inheritance Diagram"
msgstr "Diagram over klassearv"
#: parts/classview/classviewpart.cpp:213
msgid "Class inheritance diagram"
msgstr "Diagram over klassearv"
#: parts/classview/classviewpart.cpp:214
msgid ""
"<b>Class inheritance diagram</b>"
"<p>Displays inheritance relationship between classes in project. Note, it does "
"not display classes outside inheritance hierarchy."
msgstr ""
"<b>Diagram over klassearv</b> "
"<p>Viser arv-relasjonene mellom klasser i prosjektet. Merk at det ikke viser "
"klasser utenfor arvehierarkiet."
#: languages/cpp/cppsupportpart.cpp:739 parts/classview/classtreebase.cpp:43
msgid "Go to Declaration"
msgstr "Gå til deklarasjon"
#: languages/cpp/cppsupportpart.cpp:783 parts/classview/classtreebase.cpp:45
msgid "Go to Definition"
msgstr "Gå til definisjon"
#: parts/classview/classtreebase.cpp:59
msgid "Parent Classes..."
msgstr "Baseklasser …"
#: parts/classview/classtreebase.cpp:60
msgid "Child Classes..."
msgstr "Underklasser …"
#: parts/classview/classtreebase.cpp:61
msgid "Class Tool..."
msgstr "Klasseverktøy …"
#: parts/classview/classtreebase.cpp:65
msgid "Struct"
msgstr "Struct"
#: parts/classview/classtreebase.cpp:71
msgid "Attribute"
msgstr "Attributt"
#: kdevdesigner/designer/connectiontable.cpp:39
#: parts/classview/classtreebase.cpp:77
msgid "Signal"
msgstr "Signal"
#: parts/documentation/docglobalconfigwidget.cpp:267
msgid ""
"This will restore the default settings for the following documentation plugins: "
"chm, devhelp, doxygen, kdevtoc, qt.\n"
"Any change made to documentation catalogs belonging to those plugins will be "
"lost. Changes made to documentation catalogs belonging to the custom plugin "
"will be preserved.\n"
"Do you wish to continue?"
msgstr ""
#: parts/documentation/docglobalconfigwidget.cpp:275
#: parts/documentation/documentation_part.cpp:790
#, fuzzy
msgid "Rescan documentation"
msgstr "Tøm API-dokumentasjonen"
#: kdevdesigner/designer/mainwindow.cpp:1759
#: kdevdesigner/designer/mainwindow.cpp:2665
#: parts/documentation/bookmarkview.cpp:118
#: parts/documentation/docconfiglistview.cpp:32
#: parts/documentation/searchview.cpp:74 parts/documentation/searchview.cpp:99
msgid "Title"
msgstr "Tittel"
#: parts/documentation/bookmarkview.cpp:198
msgid "Edit Bookmark"
msgstr "Rediger bokmerke"
#: parts/documentation/bookmarkview.cpp:222
msgid "Current Document"
msgstr "Nåværende dokument"
#: parts/documentation/bookmarkview.cpp:223
msgid "Custom..."
msgstr "Selvvalgt …"
#: parts/documentation/bookmarkview.cpp:241
msgid "Add Bookmark"
msgstr "Legg til bokmerke"
#: parts/documentation/documentation_part.cpp:89
msgid "Project Documentation"
msgstr "Prosjektdokumentasjon"
#: parts/documentation/documentation_part.cpp:100
#, fuzzy
msgid ""
"<b>Documentation browser</b>"
"<p>The documentation browser gives access to various documentation sources (TQt "
"DCF, Doxygen, KDoc, TDevelopTOC and DevHelp documentation) and the TDevelop "
"manuals. It also provides documentation index and full text search "
"capabilities."
msgstr ""
"<b>Dokumentasjonsviser</b> "
"<p>Dokumentasjonsviseren gir tilgang til forskjellige dokumentasjonskilder (Qt "
"DCF, Doxygen, KDoc, KDevelopTOC og DevHelp-dokumentasjon) og "
"KDevelop-håndbøkene. Den inneholder også register til dokumentasjonen og kan "
"søke i full tekst."
#: parts/documentation/documentation_part.cpp:107
msgid "Documentation browser"
msgstr "Dokumentasjonsviser"
#: parts/documentation/documentation_part.cpp:194
msgid "Documentation Settings"
msgstr "Dokumentasjonsinnstillinger"
#: parts/documentation/documentation_part.cpp:213
msgid "&Search in Documentation..."
msgstr "&Søk i dokumentasjon …"
#: parts/documentation/documentation_part.cpp:216
msgid "Full text search in the documentation"
msgstr "Fulltekst-søk i dokumentasjonen"
#: parts/documentation/documentation_part.cpp:217
msgid ""
"<b>Search in documentation</b>"
"<p>Opens the Search in documentation tab. It allows a search term to be entered "
"which will be searched for in the documentation. For this to work, a full text "
"index must be created first, which can be done in the configuration dialog of "
"the documentation plugin."
msgstr ""
"<b>Søk i dokumentasjonen</b> "
"<p>Åpner fanen «Søk i dokumentasjonen». Der kan det oppgis et søkebegrep som "
"det blir lett etter i dokumentasjonen. En fulltekst-indeks må opprettes først "
"for at dette skal kunne virke, dette kan gjøres i oppsettsdialogen til "
"programtillegget for dokumentasjon."
#: parts/documentation/documentation_part.cpp:224
msgid "&Look in Documentation Index..."
msgstr "&Se i dokumentasjonsregisteret …"
#: parts/documentation/documentation_part.cpp:227
msgid "Look in the documentation index"
msgstr "Se i dokumentasjonsregisteret"
#: parts/documentation/documentation_part.cpp:228
#: parts/documentation/documentation_part.cpp:480
msgid ""
"<b>Look in documentation index</b>"
"<p>Opens the documentation index tab. It allows a term to be entered which will "
"be looked for in the documentation index."
msgstr ""
"<b>Se i dokumentasjonsregisteret</b> "
"<p>Åpner fanen for dokumentasjonsregisteret. Der kan det oppgis et søkebegrep "
"som det blir lett etter i registeret for dokumentasjonen."
#: parts/documentation/documentation_part.cpp:233
msgid "Man Page..."
msgstr "Man-side …"
#: parts/documentation/documentation_part.cpp:236
msgid "Show a manpage"
msgstr "Vis en man-side"
#: parts/documentation/documentation_part.cpp:237
msgid "<b>Show a manpage</b><p>Opens a man page using embedded viewer."
msgstr "<b>Vis en man-side</b><p>Åpner en man-side med innebygget viser."
#: parts/documentation/documentation_part.cpp:239
msgid "Info Page..."
msgstr "Info-side …"
#: parts/documentation/documentation_part.cpp:242
msgid "Show an infopage"
msgstr "Vis en info-side"
#: parts/documentation/documentation_part.cpp:243
msgid "<b>Show an infopage</b><p>Opens an info page using embedded viewer."
msgstr "<b>Vis en info-side</b><p>Åpner en info-side med en innebygget viser."
#: parts/documentation/documentation_part.cpp:245
#, fuzzy
msgid "Find Documentation..."
msgstr "Finn dokumentasjon"
#: parts/documentation/documentation_part.cpp:249
#: parts/documentation/documentation_part.cpp:471
msgid ""
"<b>Find documentation</b>"
"<p>Opens the documentation finder tab and searches all possible sources of "
"documentation like table of contents, index, man and info databases, Google, "
"etc."
msgstr ""
"<b>Finn dokumentasjon</b> "
"<p>Åpner fanen dokumentasjonsfinner og leter gjennom alle mulige kilder til "
"dokumentasjon slik som innholdsfortegnelse, register, man- og info-databaser, "
"Google osv."
#: parts/documentation/documentation_part.cpp:319
msgid "Show Manual Page"
msgstr "Vis manualside"
#: parts/documentation/documentation_part.cpp:319
msgid "Show manpage on:"
msgstr "Vis manualside om:"
#: parts/documentation/documentation_part.cpp:343
msgid "Show Info Page"
msgstr "Vis info-side"
#: parts/documentation/documentation_part.cpp:343
msgid "Show infopage on:"
msgstr "Vis info-side om:"
#: parts/documentation/documentation_part.cpp:469
#, c-format
msgid "Find Documentation: %1"
msgstr "Finn dokumentasjon: %1"
#: parts/documentation/documentation_part.cpp:478
#, c-format
msgid "Look in Documentation Index: %1"
msgstr "Se i dokumentasjonsregister: %1"
#: parts/documentation/documentation_part.cpp:486
#, c-format
msgid "Search in Documentation: %1"
msgstr "Søk i dokumentasjon: %1"
#: parts/documentation/documentation_part.cpp:488
msgid ""
"<b>Search in documentation</b>"
"<p>Searches for a term under the cursor in the documentation. For this to work, "
"a full text index must be created first, which can be done in the configuration "
"dialog of the documentation plugin."
msgstr ""
"<b>Søk i dokumentasjon</b> "
"<p>Søker i dokumentasjonen etter termen under markøren. For at dette skal kunne "
"virke må det først opprettes en fulltekstindeks. Dette kan gjøres i "
"oppsettsdialogen for programtillegget for dokumentasjon."
#: parts/documentation/documentation_part.cpp:495
#, c-format
msgid "Goto Manpage: %1"
msgstr "Gå til man-side: %1"
#: parts/documentation/documentation_part.cpp:497
msgid ""
"<b>Goto manpage</b>"
"<p>Tries to open a man page for the term under the cursor."
msgstr ""
"<b>Gå til man-side</b> "
"<p>Forsøker å åpne en man-side for termen under markøren."
#: parts/documentation/documentation_part.cpp:500
#, c-format
msgid "Goto Infopage: %1"
msgstr "Gå til info-side: %1"
#: parts/documentation/documentation_part.cpp:502
msgid ""
"<b>Goto infopage</b>"
"<p>Tries to open an info page for the term under the cursor."
msgstr ""
"<b>Gå til info-side</b> "
"<p>Forsøker å åpne en info-side for termen under markøren."
#: kdevdesigner/designer/mainwindowactions.cpp:987
#: parts/documentation/find_documentation.cpp:178
#: parts/documentation/find_documentation_options.cpp:163
msgid "Manual"
msgstr "Manuell"
#: parts/documentation/docutils.cpp:80
msgid "Open in Current Tab"
msgstr "Åpne i gjeldende fane"
#: parts/documentation/docutils.cpp:85
msgid "Bookmark This Location"
msgstr "Lag bokmerke for dette stedet"
#: parts/documentation/find_documentation_options.cpp:168
msgid "Info"
msgstr "Info"
#: parts/documentation/docconfiglistview.cpp:30
#: parts/documentation/documentation_widget.cpp:56
#: parts/documentation/find_documentation_options.cpp:173
#: parts/doxygen/messages.cpp:135
msgid "Index"
msgstr "Register"
#: parts/documentation/find_documentation_options.cpp:178
msgid "Google"
msgstr "Google"
#: parts/documentation/docconfiglistview.cpp:29
msgid "TOC"
msgstr "Innhold"
#: parts/documentation/searchview.cpp:58
msgid "Wor&ds to search:"
msgstr "Otd &det skal søkes etter:"
#: parts/documentation/searchview.cpp:63
msgid "Se&arch"
msgstr "Sø&k"
#: parts/documentation/searchview.cpp:69
msgid "and"
msgstr "og"
#: parts/documentation/searchview.cpp:70
msgid "or"
msgstr "eller"
#: parts/documentation/searchview.cpp:71
msgid "&Method:"
msgstr "&Metode:"
#: parts/documentation/searchview.cpp:73
msgid "Score"
msgstr "Poeng"
#: parts/documentation/searchview.cpp:75 vcs/cvsservice/editorsdialog.cpp:88
#: vcs/cvsservice/editorsdialog.cpp:101 vcs/subversion/svn_blamewidget.cpp:37
#: vcs/subversion/svn_logviewwidget.cpp:52
msgid "Date"
msgstr "Dato"
#: parts/documentation/searchview.cpp:76
msgid "S&ort by:"
msgstr "S&orter etter:"
#: parts/documentation/searchview.cpp:84
msgid "Search &results:"
msgstr "Søke&resultater:"
#: parts/documentation/searchview.cpp:89
msgid "Update Config"
msgstr "Oppdater oppsett"
#: parts/documentation/searchview.cpp:90
msgid "Update Index"
msgstr "Oppdater register"
#: parts/documentation/searchview.cpp:98
msgid "Relevance"
msgstr "Relevans"
#: parts/documentation/searchview.cpp:148
msgid "Full text search has to be set up before usage."
msgstr "Fulltekstsøk må settes opp før bruk."
#: parts/documentation/searchview.cpp:151
msgid ""
"Now the full text search database will be created.\n"
"Wait for database creation to finish and then repeat search."
msgstr ""
"Databasen for fulltekstsøk vil nå bli opprettet.\n"
"Vent til databasen er ferdig opprettet og gjenta deretter søket."
#: parts/documentation/searchview.cpp:158
msgid ""
"Cannot find the htsearch executable.\n"
"It is part of the ht://Dig package that is used by TDevelop to perform full "
"text search. Please install ht://Dig and use Documentation page in Configure "
"TDevelop dialog to set the htsearch location."
msgstr ""
#: parts/documentation/searchview.cpp:174
msgid "Cannot find the htdig configuration file."
msgstr "Kan ikke finne oppsettsfila for htdig."
#: parts/documentation/searchview.cpp:207
msgid "Cannot start the htsearch executable."
msgstr "Kan ikke starte programmet htsearch."
#: parts/documentation/documentation_widget.cpp:59
msgid "Finder"
msgstr "Finder"
#: parts/documentation/indexview.cpp:48
msgid "&Look for:"
msgstr "Se &etter:"
#: parts/documentation/protocols/chm/kchmpart.cpp:62
msgid "KChm"
msgstr "KChm"
#: parts/documentation/tools/htdig/htdigindex.cpp:43
msgid "Generating Search Index"
msgstr "Oppretter søkeindeks"
#: parts/documentation/tools/htdig/htdigindex.cpp:63
msgid "Scanning for files"
msgstr "Leter etter filer"
#: parts/documentation/tools/htdig/htdigindex.cpp:73
msgid "Extracting search terms"
msgstr "Pakker ut søkebegreper"
#: parts/documentation/tools/htdig/htdigindex.cpp:82
msgid "Generating index..."
msgstr "Oppretter indeks …"
#: parts/documentation/tools/htdig/htdigindex.cpp:125
#, c-format
msgid "Files processed: %1"
msgstr "Filer behandlet: %1"
#: parts/documentation/tools/htdig/htdigindex.cpp:350
msgid "Running htdig failed"
msgstr "Kjøring av htdig mislyktes"
#: parts/documentation/tools/htdig/htdigindex.cpp:411
msgid "Running htmerge failed"
msgstr "Kjøring av htmerge mislyktes"
#: parts/documentation/tools/htdig/htdigindex.cpp:448
msgid "Update user's htdig configuration file only"
msgstr "Bare oppdater brukerens oppsettsfil for htdig"
#: parts/documentation/tools/htdig/htdigindex.cpp:449
msgid "-c and generate index"
msgstr "-c og lag indeks"
#: parts/documentation/tools/htdig/htdigindex.cpp:453
#, fuzzy
msgid "TDevelop ht://Dig Indexer"
msgstr "KDevelop ht://Dig Indekserer"
#: parts/documentation/tools/htdig/htdigindex.cpp:454
msgid "TDE Index generator for documentation files."
msgstr "TDE indeksgenerator for dokumentasjonsfiler."
#: parts/documentation/tools/htdig/htdigindex.cpp:470
msgid "Configuration file updated."
msgstr "Oppsettsfil oppdatert."
#: parts/documentation/tools/htdig/htdigindex.cpp:472
msgid "Configuration file update failed."
msgstr "Oppdatering av oppsettsfil mislyktes."
#: parts/documentation/plugins/pdb/docpdbplugin.cpp:30
msgid "PalmDoc documentation plugin"
msgstr "Programtillegg for PalmDoc-dokumentasjon"
#: parts/documentation/plugins/pdb/docpdbplugin.cpp:52
msgid "PalmDoc Documentation Collection"
msgstr "PalmDoc dokumentasjonssamling"
#: parts/documentation/plugins/djvu/docdjvuplugin.cpp:30
msgid "Djvu documentation plugin"
msgstr "Programtillegg for Djvu-dokumentasjon"
#: parts/documentation/plugins/djvu/docdjvuplugin.cpp:52
msgid "Djvu Documentation Collection"
msgstr "Djvu dokumentasjonssamling"
#: parts/documentation/plugins/kdevtoc/dockdevtocplugin.cpp:80
#, fuzzy
msgid "TDevelopTOC Documentation Collection"
msgstr "KDevelopTOC dokumentasjonssamling"
#: parts/documentation/plugins/custom/doccustomplugin.cpp:55
msgid "Custom Documentation Collection"
msgstr "Selvvalgt dokumentasjonssamling"
#: parts/documentation/plugins/pdf/docpdfplugin.cpp:30
msgid "PDF documentation plugin"
msgstr "Programtillegg for PDF-dokumentasjon"
#: parts/documentation/plugins/pdf/docpdfplugin.cpp:52
msgid "PDF Documentation Collection"
msgstr "PDF dokumentasjonssamling"
#: parts/documentation/plugins/doxygen/docdoxygenplugin.cpp:126
msgid "Doxygen Documentation Collection"
msgstr "Doxygen dokumentasjonssamling"
#: parts/documentation/plugins/doxygen/docdoxygenplugin.cpp:461
msgid "%1 Class Reference"
msgstr "%1 Klassereferanse"
#: parts/documentation/plugins/doxygen/docdoxygenplugin.cpp:478
msgid "%1::%2%3 Member Reference"
msgstr "%1::%2%3 Medlemsreferanse"
#: parts/documentation/plugins/qt/docqtplugin.cpp:205
#, fuzzy
msgid "TQt Documentation Collection"
msgstr "Qt dokumentasjonssamling"
#: parts/documentation/plugins/devhelp/docdevhelpplugin.cpp:120
msgid "Devhelp Documentation Collection"
msgstr "Devhelp dokumentasjonssamling"
#: parts/documentation/plugins/chm/docchmplugin.cpp:74
msgid "CHM Documentation Collection"
msgstr "CHM dokumentasjonssamling"
#: parts/partexplorer/partexplorerform.cpp:49
msgid "Name: %1 | Type: %2 | Value: %3"
msgstr "Navn: %1 | Type: %2 | Verdi: %3"
#: parts/partexplorer/partexplorerform.cpp:112
msgid "Part Explorer - A Services Lister"
msgstr "Part Explorer lister tjenester"
#: parts/partexplorer/partexplorerform.cpp:122
msgid ""
"<b>Matching services</b>"
"<p>Results (if any) are shown grouped by matching service name."
msgstr ""
"<b>Samsvarende tjenester</b>"
"<p>Resultater (om noen) vises gruppert etter samsvarende tjenestenavn."
#: kdevdesigner/designer/mainwindowactions.cpp:310
#: parts/partexplorer/partexplorerform.cpp:129
msgid "&Search"
msgstr "&Søk"
#: parts/partexplorer/partexplorerform.cpp:181
msgid "Unknown error."
msgstr "Ukjent feil."
#: parts/partexplorer/partexplorerform.cpp:194
msgid "No service found matching the criteria."
msgstr "Fant ingen tjeneste som stemte med kriteriene."
#: parts/partexplorer/partexplorer_plugin.cpp:43
msgid "&Part Explorer"
msgstr "&Part Explorer"
#: parts/partexplorer/partexplorer_plugin.cpp:45
msgid "TDETrader query execution"
msgstr "TDETrader spørrekjøring"
#: parts/partexplorer/partexplorer_plugin.cpp:46
msgid ""
"<b>Part explorer</b>"
"<p>Shows a dialog for TDETrader query execution. Search your TDE documentation "
"for more information about TDE services and TDETrader."
msgstr ""
"<b>Part-utforsker</b>"
"<p>Viser en dialog for kjøring av en TDETrader-spørring. Se i "
"TDE-dokumentasjonen etter mer informasjon om TDE-tjenester og TDETrader."
#: parts/valgrind/valgrind_dialog.cpp:20
msgid "Valgrind Memory Check"
msgstr "Valgrind minnesjekk"
#: parts/valgrind/valgrind_dialog.cpp:80
#: parts/valgrind/valgrind_dialog.cpp:140
msgid ""
"Could not find valgrind in your $PATH. Please make sure it is installed "
"properly."
msgstr ""
"Fant ikke valgrind i søkestien $PATH. Se etter at det er riktig installert."
#: parts/valgrind/valgrind_dialog.cpp:82
#: parts/valgrind/valgrind_dialog.cpp:142
msgid "Valgrind Not Found"
msgstr "Fant ikke valgrind"
#: parts/valgrind/valgrind_dialog.cpp:185
msgid ""
"Could not find tdecachegrind in your $PATH. Please make sure it is installed "
"properly."
msgstr ""
"Fant ikke tdecachegrind i søkestien $PATH. Se etter at det er riktig "
"installert."
#: parts/valgrind/valgrind_dialog.cpp:187
msgid "KCachegrind Not Found"
msgstr "Fant ikke tdecachegrind"
#: parts/valgrind/valgrind_part.cpp:49
msgid "Valgrind Output"
msgstr "Utdata fra valgrind"
#: parts/valgrind/valgrind_part.cpp:51
msgid ""
"<b>Valgrind</b>"
"<p>Shows the output of the valgrind. Valgrind detects"
"<br>use of uninitialized memory"
"<br>reading/writing memory after it has been free'd"
"<br>reading/writing off the end of malloc'd blocks"
"<br>reading/writing inappropriate areas on the stack"
"<br>memory leaks -- where pointers to malloc'd blocks are lost forever"
"<br>passing of uninitialised and/or unaddressable memory to system calls"
"<br>mismatched use of malloc/new/new [] vs free/delete/delete []"
"<br>some abuses of the POSIX pthread API."
msgstr ""
"<b>Valgrind</b> "
"<p>Viser utdata fra valgrind. Valgrind finner "
"<br>bruk av ikke klargjort minne "
"<br>lesing/skriving av minne etter «free» "
"<br>lesing/skriving utenfor slutten av malloc-blokker "
"<br>lesing/skriving på feil områder i stakken "
"<br>minnelekkasjer -- der pekere til malloc-blokker forsvinner for alltid "
"<br>systemkall som får oversendt minne som ikke er klargjort eller ikke kan "
"adresseres "
"<br>umake bruk av malloc/new/new [] mot free/delete/delete [] "
"<br>noe misbruk av POSIXs pthread-API."
#: parts/valgrind/valgrind_part.cpp:61
msgid "&Valgrind Memory Leak Check"
msgstr "&Valgrind sjekk på minnelekkasje"
#: parts/valgrind/valgrind_part.cpp:63 parts/valgrind/valgrind_part.cpp:71
msgid "Valgrind memory leak check"
msgstr "Valgrind sjekk på minnelekkasje"
#: parts/valgrind/valgrind_part.cpp:64
msgid ""
"<b>Valgrind memory leak check</b>"
"<p>Runs Valgrind - a tool to help you find memory-management problems in your "
"programs."
msgstr ""
"<b>Valgrind sjekk på minnelekkasje</b> "
"<p>Kjører Valgrind et verktøy som hjelper til å finne minnestyringsproblemer "
"i programmer."
#: parts/valgrind/valgrind_part.cpp:66
msgid "P&rofile with KCachegrind"
msgstr "P&rofiler med KCachegrind"
#: parts/valgrind/valgrind_part.cpp:68
msgid "Profile with KCachegrind"
msgstr "Profiler med KCachegrind"
#: parts/valgrind/valgrind_part.cpp:69
msgid ""
"<b>Profile with KCachegrind</b>"
"<p>Runs your program in calltree and then displays profiler information in "
"KCachegrind."
msgstr ""
"<b>Profiler med KCachegrind</b> "
"<p> Kjører programmet i «calltree» og viser så profileringsinformasjonen i "
"KCachegrind."
#: parts/valgrind/valgrind_part.cpp:90
msgid "Open Valgrind Output"
msgstr "Åpne Valgrind utdata"
#: parts/valgrind/valgrind_part.cpp:96
#, c-format
msgid "Could not open valgrind output: %1"
msgstr "Klarte ikke åpne valgrind utdata: %1"
#: parts/valgrind/valgrind_part.cpp:217
msgid "There is already an instance of valgrind running."
msgstr "Det kjører en instans av valgrind fra før."
#: parts/valgrind/valgrind_widget.cpp:95
msgid "No."
msgstr "Nei."
#: kdevdesigner/designer/outputwindow.cpp:84
#: parts/valgrind/valgrind_widget.cpp:97
msgid "Message"
msgstr "Melding"
#: parts/valgrind/valgrind_widget.cpp:104
msgid "&Open Valgrind Output..."
msgstr "&Åpne valgrind utdata …"
#: parts/valgrind/valgrind_widget.cpp:106
msgid "Expand All Items"
msgstr "Fold ut alle elementer"
#: parts/valgrind/valgrind_widget.cpp:107
msgid "Collapse All Items"
msgstr "Fold sammen alle elementer"
#: parts/doxygen/doxygenpart.cpp:61
msgid "Build API Documentation"
msgstr "Bygg API-dokumentasjon"
#: parts/doxygen/doxygenpart.cpp:64
msgid "Build API documentation"
msgstr "Bygg dokumentasjon for API"
#: parts/doxygen/doxygenpart.cpp:65
msgid ""
"<b>Build API documentation</b>"
"<p>Runs doxygen on a project Doxyfile to generate API documentation. If the "
"search engine is enabled in Doxyfile, this also runs doxytag to create it."
msgstr ""
"<b>Bygg API-dokumentasjon</b>"
"<p>Kjører doxygen på et prosjekts Doxyfile for å lage API-dokumentasjon. Hvis "
"søkemotoren er slått på i Doxyfile, så kjøres også doxytag for å opprette den."
#: parts/doxygen/doxygenpart.cpp:68
msgid "Clean API Documentation"
msgstr "Tøm API-dokumentasjon"
#: parts/doxygen/doxygenpart.cpp:71
msgid "Clean API documentation"
msgstr "Tøm API-dokumentasjonen"
#: parts/doxygen/doxygenpart.cpp:72
msgid ""
"<b>Clean API documentation</b>"
"<p>Removes all generated by doxygen files."
msgstr ""
"<b>Tøm API-dokumentasjon</b>"
"<p>Sletter alt som er laget av doxygen-filer."
#: parts/doxygen/doxygenpart.cpp:77
msgid "Doxygen"
msgstr "Doxygen"
#: parts/doxygen/doxygenpart.cpp:81
msgid "Document Current Function"
msgstr "Dokumenter denne funksjonen"
#: parts/doxygen/doxygenpart.cpp:82
msgid "Create a documentation template above a function"
msgstr "Lag en dokumentasjonsmal over en funksjon"
#: parts/doxygen/doxygenpart.cpp:83
msgid ""
"<b>Document Current Function</b>"
"<p>Creates a documentation template according to a function's signature above a "
"function definition/declaration."
msgstr ""
"<b>Dokumenter denne funksjonen</b>"
"<p>Oppretter en dokumntasjonsmal i følge en funksjons signatur over en "
"funksjonsdefinisjon/deklarasjon."
#: parts/doxygen/doxygenpart.cpp:87
msgid "Preview Doxygen Output"
msgstr "Forhåndsvis utdata fra Doxygen"
#: parts/doxygen/doxygenpart.cpp:88
msgid "Show a preview of the Doxygen output of this file"
msgstr "Vis en forhåndsvisning av doxygens utdata for denne fila"
#: parts/doxygen/doxygenpart.cpp:89
msgid ""
"<b>Preview Doxygen output</b>"
"<p>Runs Doxygen over the current file and shows the created index.html."
msgstr ""
"<b>Forhåndsvis Doxygens utdata</b>"
"<p>Kjører Doxygen over denne fila og viser den index.html-fila som opprettes."
#: parts/doxygen/doxygenconfigwidget.cpp:258 parts/doxygen/doxygenpart.cpp:205
msgid "Cannot write Doxyfile."
msgstr "Kan ikke skrive til Doxyfil."
#: parts/doxygen/doxygenpart.cpp:370
msgid "Another process is still running. Please wait until it's finished."
msgstr ""
#: parts/doxygen/doxygenpart.cpp:451
msgid "Cannot create temporary file '%1'"
msgstr "Kan ikke opprette midlertidig fil «%1»"
#: parts/doxygen/messages.cpp:29
#: src/profileengine/editor/profileeditor.cpp:141
msgid "Project"
msgstr "Prosjekt"
#: parts/doxygen/messages.cpp:30
msgid "Project name"
msgstr "Prosjektnavn"
#: parts/doxygen/messages.cpp:31
msgid "Project version"
msgstr "Prosjektversjon"
#: parts/doxygen/messages.cpp:32
msgid "Output path"
msgstr "Utdata-sti"
#: parts/doxygen/messages.cpp:33
msgid "Distribute the generated docs in 10 subdirectories"
msgstr "Fordel den opprettede dokumentasjonen på 10 undermapper"
#: parts/doxygen/messages.cpp:34
msgid "Output language"
msgstr "Utdata-språk"
#: parts/doxygen/messages.cpp:35
msgid "Use MS Windows(tm) font encoding"
msgstr "Bruk skriftkoding for MS Windows (tm)"
#: parts/doxygen/messages.cpp:36
msgid "Include brief member descriptions"
msgstr "Ta med korte medlemsbeskrivelser"
#: parts/doxygen/messages.cpp:37
msgid "Repeat brief member descriptions"
msgstr "Gjenta korte medlemsbeskrivelser"
#: parts/doxygen/messages.cpp:38
msgid "Strip words in brief description"
msgstr "Stryk ut ord i kort beskrivelse"
#: parts/doxygen/messages.cpp:39
msgid "Always include detailed section"
msgstr "Ta alltid med detaljert avsnitt"
#: parts/doxygen/messages.cpp:40
msgid "Inline inherited members"
msgstr "Arvede medlemmer tas inn"
#: parts/doxygen/messages.cpp:41
msgid "Always use full path names"
msgstr "Bruk alltid fullstendige sti-navn"
#: parts/doxygen/messages.cpp:42
msgid "Prefix to strip from path names"
msgstr "Prefiks som skal fjernes fra sti-navn"
#: parts/doxygen/messages.cpp:43
msgid "Strip from include path"
msgstr "Stryk fra inkluder-sti"
#: parts/doxygen/messages.cpp:44
msgid "Generate short file names"
msgstr "Lag korte filnavn"
#: parts/doxygen/messages.cpp:45
msgid "Use JavaDoc-style brief descriptions"
msgstr "Bruk korte beskrivelser i JavaDoc-stil"
#: parts/doxygen/messages.cpp:46
msgid "Multiline cpp is brief"
msgstr "Flerlinjes cpp er kort"
#: parts/doxygen/messages.cpp:47
msgid "Details at top"
msgstr "Detaljer øverst"
#: parts/doxygen/messages.cpp:48
msgid "Inherit documentation"
msgstr "Arv dokumentasjon "
#: parts/doxygen/messages.cpp:49
msgid "Produce a new page for each member"
msgstr ""
#: parts/doxygen/messages.cpp:50
msgid "Tab size"
msgstr "TAB-størrelse"
#: parts/doxygen/messages.cpp:51
msgid "Aliases"
msgstr "Aliaser"
#: parts/doxygen/messages.cpp:52
msgid "Optimize output for C"
msgstr "Optimer utdata for C"
#: parts/doxygen/messages.cpp:53
msgid "Optimize output for Java"
msgstr "Optimer utdata for Java"
#: parts/doxygen/messages.cpp:54
msgid "Use built-in STL classes support"
msgstr ""
#: parts/doxygen/messages.cpp:55
msgid "Use group documentation on undocumented members"
msgstr "Bruk gruppedokumentasjon på udokumenterte medlemmer"
#: parts/doxygen/messages.cpp:56
msgid "Class members type subgrouping"
msgstr "Undergruppering av klassemedlemmer etter type"
#: buildtools/autotools/autosubprojectview.cpp:220
#: buildtools/autotools/autosubprojectview.cpp:221
#: buildtools/qmake/trollprojectwidget.cpp:996
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:157
#: parts/doxygen/messages.cpp:61
msgid "Build"
msgstr "Bygg"
#: parts/doxygen/messages.cpp:62
msgid "Extract undocumented entities"
msgstr "Trekk ut udokumenterte enheter"
#: parts/doxygen/messages.cpp:63
msgid "Extract private entities"
msgstr "Trekk ut private enheter"
#: parts/doxygen/messages.cpp:64
msgid "Extract static entities"
msgstr "Trekk ut statiske enheter"
#: parts/doxygen/messages.cpp:65
msgid "Extract local classes"
msgstr "Trekk ut lokale klasser"
#: parts/doxygen/messages.cpp:66
msgid "Extract local methods"
msgstr "Trekk ut lokale metoder"
#: parts/doxygen/messages.cpp:67
msgid "Hide undocumented members"
msgstr "Skjul udokumenterte medlemmer"
#: parts/doxygen/messages.cpp:68
msgid "Hide undocumented classes"
msgstr "Skjul udokumenterte klasser"
#: parts/doxygen/messages.cpp:69
msgid "Hide friend compounds"
msgstr "Skjul friend-sammensetninger"
#: parts/doxygen/messages.cpp:70
msgid "Hide in body docs"
msgstr "Skjul i brødtekst-dok"
#: parts/doxygen/messages.cpp:71
msgid "Document internal entities"
msgstr "Dokumenter interne enheter"
#: parts/doxygen/messages.cpp:72
msgid "Use case-sensitive file names"
msgstr "Skjelne mellom små og store bokstaver i filnavn"
#: parts/doxygen/messages.cpp:73
msgid "Hide name scopes"
msgstr "Skjul navneomfang"
#: parts/doxygen/messages.cpp:74
msgid "Show included files"
msgstr "Vis inkluderte filer"
#: parts/doxygen/messages.cpp:75
msgid "Make inline functions"
msgstr "Lag innbakte funksjoner"
#: parts/doxygen/messages.cpp:76
msgid "Sort member documentation alphabetically"
msgstr "Sorter medlemsdokumentasjon alfabetisk"
#: parts/doxygen/messages.cpp:77
msgid "Sort the class list by fully-qualified names"
msgstr "Sorter klasselista etter fulle navn"
#: parts/doxygen/messages.cpp:78
msgid "Sort brief documentation alphabetically"
msgstr "Sorter kort dokumentasjon alfabetisk"
#: parts/doxygen/messages.cpp:79
msgid "Enable conditional sections"
msgstr "Slå på betingede avsnitt"
#: parts/doxygen/messages.cpp:80
msgid "Generate TODO-list"
msgstr "Lag gjøreliste"
#: parts/doxygen/messages.cpp:81
msgid "Generate Test-list"
msgstr "Lag test-liste"
#: parts/doxygen/messages.cpp:82
msgid "Generate Bug-list"
msgstr "Lag feilliste"
#: parts/doxygen/messages.cpp:83
msgid "Generate Deprecated-list"
msgstr "Lag Frarådet-liste"
#: parts/doxygen/messages.cpp:84
msgid "Maximum lines shown for initializers"
msgstr "Største antall linjer vist for initialiserere"
#: parts/doxygen/messages.cpp:85
msgid "Show used files"
msgstr "Vis brukte filer"
#: parts/doxygen/messages.cpp:86
msgid "Show the directory hierarchy"
msgstr ""
#: parts/doxygen/messages.cpp:87
msgid "Script to invoke to get the current version for each file"
msgstr ""
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:178
#: parts/doxygen/messages.cpp:92 parts/outputviews/makeviewpart.cpp:52
msgid "Messages"
msgstr "Meldinger"
#: parts/doxygen/messages.cpp:93
msgid "Suppress output"
msgstr "Ikke skriv utdata"
#: parts/doxygen/messages.cpp:94
msgid "Show warnings"
msgstr "Vis advarsler"
#: parts/doxygen/messages.cpp:95
msgid "Warn about undocumented entities"
msgstr "Varsle om udokumenterte enheter"
#: parts/doxygen/messages.cpp:96
msgid "Warn if error in documents"
msgstr "Varsle hvis feil i dokumenter"
#: parts/doxygen/messages.cpp:97
#, fuzzy
msgid "Warn if function parameters are not documented"
msgstr "Varsle hvis feil i dokumenter"
#: parts/doxygen/messages.cpp:98
msgid "Warnings format"
msgstr "Format for advarsler"
#: parts/doxygen/messages.cpp:99
msgid "Write warnings to"
msgstr "Skriv advarsler til"
#: parts/doxygen/messages.cpp:104
msgid "Input"
msgstr "Inndata"
#: parts/doxygen/messages.cpp:105
msgid "Input files and directories"
msgstr "Inn-filer og katalogber"
#: parts/doxygen/messages.cpp:106
msgid "Input patterns"
msgstr "Inn-mønstre"
#: parts/doxygen/messages.cpp:107
msgid "Recurse into subdirectories"
msgstr "Rekursivt gjennom undermapper"
#: parts/doxygen/messages.cpp:108
msgid "Exclude from input"
msgstr "Utelat fra inndata"
#: parts/doxygen/messages.cpp:109
msgid "Exclude symlinks"
msgstr "Utelat symlenker"
#: parts/doxygen/messages.cpp:110
msgid "Exclude patterns"
msgstr "Utelat mønstre"
#: parts/doxygen/messages.cpp:111
msgid "Path to examples"
msgstr "Sti til eksempler"
#: parts/doxygen/messages.cpp:112
msgid "Example patterns"
msgstr "Mønstereksempler"
#: parts/doxygen/messages.cpp:113
msgid "Example recursive"
msgstr "Rekursiv-eksempel"
#: parts/doxygen/messages.cpp:114
msgid "Path to images"
msgstr "Sti til bilder"
#: parts/doxygen/messages.cpp:115
msgid "Input filter"
msgstr "Inndata-filter"
#: parts/doxygen/messages.cpp:116
msgid "Filter input files"
msgstr "Filtrer inndata-filer"
#: parts/doxygen/messages.cpp:117
msgid "Apply filters on file patterns"
msgstr "Bruk filtre på filmønstre"
#: parts/doxygen/messages.cpp:122
msgid "Source Browser"
msgstr "Bla i kildekode"
#: parts/doxygen/messages.cpp:123
msgid "Cross-reference with source files"
msgstr "Kryssreferanse med kildefiler"
#: parts/doxygen/messages.cpp:124
#, fuzzy
msgid "References will link to source code"
msgstr "Kryssreferanse med kildefiler"
#: parts/doxygen/messages.cpp:125
msgid "Use links to HTAGS"
msgstr ""
#: parts/doxygen/messages.cpp:126
msgid "Inline sources"
msgstr "Innebygg kilder"
#: parts/doxygen/messages.cpp:127
msgid "Hide special comment blocks"
msgstr "Skjul spesielle kommentarblokker"
#: parts/doxygen/messages.cpp:128
msgid "Referenced by relation"
msgstr "Referert ved relasjon"
#: parts/doxygen/messages.cpp:129
msgid "References relation"
msgstr "Refererer til relasjon"
#: parts/doxygen/messages.cpp:130
msgid "Include headers verbatim"
msgstr "Ta med hode-filer ordrett"
#: parts/doxygen/messages.cpp:136
msgid "Generate alphabetical index"
msgstr "Lag alfabetisk register"
#: parts/doxygen/messages.cpp:137
msgid "Columns in index"
msgstr "Kolonner i register"
#: parts/doxygen/messages.cpp:138
msgid "Prefix to ignore"
msgstr "Prefiks som skal ignoreres"
#: parts/doxygen/messages.cpp:143
msgid "HTML"
msgstr "HTML"
#: parts/doxygen/messages.cpp:144
msgid "Generate HTML"
msgstr "Lag HTML"
#: parts/doxygen/messages.cpp:145
msgid "HTML output directory"
msgstr "Utdata-mappe for HTML"
#: parts/doxygen/messages.cpp:146
msgid "HTML file extension"
msgstr "Filendelse for HTML"
#: parts/doxygen/messages.cpp:147
msgid "Header file"
msgstr "Topptekst-fil"
#: parts/doxygen/messages.cpp:148
msgid "Footer file"
msgstr "Bunntekst-fil"
#: parts/doxygen/messages.cpp:149 parts/doxygen/messages.cpp:187
msgid "Stylesheet"
msgstr "Stilark"
#: parts/doxygen/messages.cpp:150
msgid "Align members"
msgstr "Innrett medlemmer"
#: parts/doxygen/messages.cpp:151
msgid "Generate HTML-help"
msgstr "Lag HTML-hjelp"
#: parts/doxygen/messages.cpp:152
msgid "CHM file"
msgstr "CHM fil"
#: parts/doxygen/messages.cpp:153
msgid "HHC location"
msgstr "HHC-sted"
#: parts/doxygen/messages.cpp:154
msgid "Generate .chi file"
msgstr "Lag .chi-fil"
#: parts/doxygen/messages.cpp:155
msgid "Generate binary TOC"
msgstr "Lag binær innholdsfortegnelse"
#: parts/doxygen/messages.cpp:156
msgid "Expand TOC"
msgstr "Utvid innholdsfortegnelse"
#: parts/doxygen/messages.cpp:157
msgid "Disable index"
msgstr "Slå av register"
#: parts/doxygen/messages.cpp:158
msgid "Number of enum values per line"
msgstr "Antall enum-verdier pr. linje"
#: parts/doxygen/messages.cpp:159
msgid "Generate treeview"
msgstr "Lag trevisning"
#: parts/doxygen/messages.cpp:160
msgid "Treeview width"
msgstr "Bredde på trevisning"
#: parts/doxygen/messages.cpp:165
msgid "LaTeX"
msgstr "LaTeX"
#: parts/doxygen/messages.cpp:166
msgid "Generate LaTeX"
msgstr "Lag LaTeX"
#: parts/doxygen/messages.cpp:167
msgid "LaTeX output directory"
msgstr "Utdata-mappe for LaTeX"
#: parts/doxygen/messages.cpp:168
msgid "LaTeX command name"
msgstr "LaTeX kommandonavn"
#: parts/doxygen/messages.cpp:169
msgid "MakeIndex command name"
msgstr "MakeIndex kommandonavn"
#: parts/doxygen/messages.cpp:170 parts/doxygen/messages.cpp:185
msgid "Generate compact output"
msgstr "Lak kompakt utdata"
#: parts/doxygen/messages.cpp:171
msgid "Paper type"
msgstr "Papirtype"
#: parts/doxygen/messages.cpp:172
msgid "Include extra packages"
msgstr "Ta med ekstra pakker"
#: parts/doxygen/messages.cpp:173
msgid "LaTeX Header file"
msgstr "LaTeX hodefil"
#: parts/doxygen/messages.cpp:174
msgid "Generate PDF hyperlinks"
msgstr "Lag PDF hyperlenker"
#: parts/doxygen/messages.cpp:175
msgid "Use pdflatex"
msgstr "Bruk pdflatex"
#: parts/doxygen/messages.cpp:176
msgid "Use batch mode"
msgstr "Bruk batch-kjøring"
#: parts/doxygen/messages.cpp:177
msgid "Do not include index chapters"
msgstr "Ikke ta med registerkapitler"
#: parts/doxygen/messages.cpp:182
msgid "RTF"
msgstr "RTF"
#: parts/doxygen/messages.cpp:183
msgid "Generate RTF"
msgstr "Lag RTF"
#: parts/doxygen/messages.cpp:184
msgid "RTF output directory"
msgstr "Utdata-mappe for RTF"
#: parts/doxygen/messages.cpp:186
msgid "Generate hyperlinks"
msgstr "Lag hyperlenker"
#: parts/doxygen/messages.cpp:188
msgid "Extensions file"
msgstr "Fil for utvidelser"
#: parts/doxygen/messages.cpp:193
msgid "Man"
msgstr "Man"
#: parts/doxygen/messages.cpp:194
msgid "Generate man pages"
msgstr "Lag man-sider"
#: parts/doxygen/messages.cpp:195
msgid "Man output directory"
msgstr "Utdata-mappe for man"
#: parts/doxygen/messages.cpp:196
msgid "Man extension"
msgstr "Man-endelse"
#: parts/doxygen/messages.cpp:197
msgid "Generate links"
msgstr "Lag lenker"
#: parts/doxygen/messages.cpp:203
msgid "Generate XML"
msgstr "Lag XML"
#: parts/doxygen/messages.cpp:204
msgid "XML output directory"
msgstr "Utdata-mappe for XML"
#: parts/doxygen/messages.cpp:205
msgid "XML schema"
msgstr "XML-skjema"
#: parts/doxygen/messages.cpp:206
msgid "XML DTD file"
msgstr "XML DTD fil"
#: parts/doxygen/messages.cpp:207
msgid "Dump program listings to the XML output"
msgstr "Dump programlister til XML utdata"
#: parts/doxygen/messages.cpp:212
msgid "DEF"
msgstr "DEF"
#: parts/doxygen/messages.cpp:213
msgid "Generate Autogen DEF"
msgstr "Lag Autogen DEF"
#: parts/doxygen/messages.cpp:219
msgid "Generate Perl module"
msgstr "Lag Perl-modul"
#: parts/doxygen/messages.cpp:220
msgid "Generate PDF and DVI using LaTeX"
msgstr "Lag PDF og DVI med LaTeX"
#: parts/doxygen/messages.cpp:221
msgid "Make the Perl module output human readable"
msgstr "Gjør utdata for Perl-modulen lesbar for mennesker"
#: parts/doxygen/messages.cpp:222
msgid "Perl module variable prefix in the makefiles"
msgstr "Variabel-prefiks for Perl-modulen i make-filene"
#: parts/doxygen/messages.cpp:227
msgid "Preprocessor"
msgstr "Preprosessor"
#: parts/doxygen/messages.cpp:228
msgid "Enable preprocessing"
msgstr "Slå på pre-prosessering"
#: parts/doxygen/messages.cpp:229
msgid "Expand macros"
msgstr "Utvikle makroer"
#: parts/doxygen/messages.cpp:230
msgid "Expand only predefined macros"
msgstr "Utvikle bare forhåndsvalgte makroer"
#: parts/doxygen/messages.cpp:231
msgid "Search for includes"
msgstr "Søk etter inkluderinger"
#: parts/doxygen/messages.cpp:232
msgid "Include path"
msgstr "Include-sti"
#: parts/doxygen/messages.cpp:233
msgid "Include file patterns"
msgstr "Mønster for include-filer"
#: parts/doxygen/messages.cpp:234
msgid "Predefined macros"
msgstr "Forhåndsvalgte makroer"
#: parts/doxygen/messages.cpp:235
msgid "Expand as defined"
msgstr "Utvikle som angitt"
#: parts/doxygen/messages.cpp:236
msgid "Skip function macros"
msgstr "Hopp over funksjonsmakroer"
#: parts/doxygen/messages.cpp:241
msgid "External"
msgstr "Ekstern"
#: parts/doxygen/messages.cpp:242
msgid "Tagfiles"
msgstr "Tag-filer"
#: parts/doxygen/messages.cpp:243
msgid "Generate tagfile"
msgstr "Lag tag-fil"
#: parts/doxygen/messages.cpp:244
msgid "List all externals"
msgstr "List alle eksterne"
#: parts/doxygen/messages.cpp:245
msgid "External groups"
msgstr "Eksterne grupper"
#: parts/doxygen/messages.cpp:246
msgid "Path to Perl"
msgstr "Sti til Perl"
#: parts/doxygen/messages.cpp:251
msgid "Dot"
msgstr "Dot"
#: parts/doxygen/messages.cpp:252
msgid "Generate class diagrams"
msgstr "Lag klassediagrammer"
#: parts/doxygen/messages.cpp:253
msgid "Hide undocumented relations"
msgstr "Skjul udokumenterte relasjoner"
#: parts/doxygen/messages.cpp:254
msgid "Use dot"
msgstr "Bruk dot"
#: parts/doxygen/messages.cpp:255
#, fuzzy
msgid "Generate a caller dependency graph"
msgstr "Lag diagrammer over «medregnet -av»"
#: parts/doxygen/messages.cpp:256
msgid "Generate class graphs"
msgstr "Lag klasse-diagrammer"
#: parts/doxygen/messages.cpp:257
msgid "Generate collaboration graphs"
msgstr "Lag samarbeidsdiagrammer"
#: parts/doxygen/messages.cpp:258
msgid "Generate a graph showing the direct groups dependencies"
msgstr ""
#: parts/doxygen/messages.cpp:259
msgid "Generate UML looking inheritance and colloboration diagrams"
msgstr "Lag arv- og samarbeidsdiagrammer som i UML"
#: parts/doxygen/messages.cpp:260
msgid "Show relations between templates and their instances"
msgstr "Vis relasjoner mellom maler og deres forekomster"
#: parts/doxygen/messages.cpp:261
msgid "Generate include graphs"
msgstr "Lag inkluderingsdiagrammer"
#: parts/doxygen/messages.cpp:262
msgid "Generate included-by graphs"
msgstr "Lag diagrammer over «medregnet -av»"
#: parts/doxygen/messages.cpp:263
msgid ""
"Generate a call dependency graph for every global function or class method"
msgstr ""
"Lag et diagram over kall-avhengighet for hver globale funksjon eller "
"klasse-metode"
#: parts/doxygen/messages.cpp:264
msgid "Generate graphical hierarchy"
msgstr "Lag grafisk hierarki"
#: parts/doxygen/messages.cpp:265
msgid "Show the dependencies a directory has on other directories"
msgstr ""
#: parts/doxygen/messages.cpp:266
msgid "Dot image format"
msgstr "Dot-bildeformat"
#: parts/doxygen/messages.cpp:267
msgid "Path to dot"
msgstr "Sti til dot"
#: parts/doxygen/messages.cpp:268
msgid "Directories with extra dot files"
msgstr "Mapper med ekstra dot-filer"
#: parts/doxygen/messages.cpp:269
msgid "Maximum graph width"
msgstr "Største diagram-bredde"
#: parts/doxygen/messages.cpp:270
msgid "Maximum graph height"
msgstr "Største diagram-høyde"
#: parts/doxygen/messages.cpp:271
msgid "Maximum graph depth"
msgstr "Største diagram-dybde"
#: parts/doxygen/messages.cpp:272
msgid "Generate images with a transparent background"
msgstr ""
#: parts/doxygen/messages.cpp:273
msgid "Generate multiple output files in one run"
msgstr ""
#: parts/doxygen/messages.cpp:274
msgid "Generate legend"
msgstr "Lag diagramtekst"
#: parts/doxygen/messages.cpp:275
msgid "Remove intermediate files"
msgstr "Slett mellomfiler"
#: parts/doxygen/messages.cpp:281
msgid "Search engine"
msgstr "Søkemotor"
#: parts/doxygen/messages.cpp:282
msgid "CGI name"
msgstr "CGI-navn"
#: parts/doxygen/messages.cpp:283
msgid "CGI URL"
msgstr "CGI-URL"
#: parts/doxygen/messages.cpp:284
msgid "Documentation URL"
msgstr "URL til dokumentasjon"
#: parts/doxygen/messages.cpp:285
msgid "Absolute path to documentation"
msgstr "Absolutt sti til dokumentasjon"
#: parts/doxygen/messages.cpp:286
msgid "Absolute path to doxysearch binary"
msgstr "Absolutt sti til doxysearch-programmet"
#: parts/doxygen/messages.cpp:287
msgid "Paths to external documentation"
msgstr "Stier til ekstern dokumentasjon"
#: parts/doxygen/input.cpp:223 parts/doxygen/input.cpp:366
msgid "Browse to a file"
msgstr "Bla til en fil"
#: parts/doxygen/input.cpp:223 parts/doxygen/input.cpp:372
msgid "Browse to a folder"
msgstr "Bla til en mappe"
#: parts/doxygen/input.cpp:341
msgid "Add item"
msgstr "Legg til element"
#: parts/doxygen/input.cpp:346
msgid "Delete selected item"
msgstr "Slett valgt element"
#: parts/doxygen/input.cpp:351
msgid "Update selected item"
msgstr "Oppdater valgt element"
#: parts/abbrev/abbrevpart.cpp:80
msgid "Expand Text"
msgstr "Fullfør tekst"
#: parts/abbrev/abbrevpart.cpp:83
msgid "Expand current word"
msgstr "Fullfør gjeldende ord"
#: parts/abbrev/abbrevpart.cpp:84
msgid ""
"<b>Expand current word</b>"
"<p>Current word can be completed using the list of similar words in source "
"files."
msgstr ""
"<b>Fullfør gjeldende ord</b> "
"<p>Gjeldende ord kan fullføres ved hjelp av lista over liknende ord i "
"kildefiler."
#: parts/abbrev/abbrevpart.cpp:86
msgid "Expand Abbreviation"
msgstr "Utvid forkortelse"
#: parts/abbrev/abbrevpart.cpp:89
msgid "Expand abbreviation"
msgstr "Utvid forkortelse"
#: parts/abbrev/abbrevpart.cpp:90
#, fuzzy
msgid ""
"<b>Expand abbreviation</b>"
"<p>Enable and configure abbreviations in <b>TDevelop Settings</b>, <b>"
"Abbreviations</b> tab."
msgstr ""
"<b>Utvid forkortelse</b> "
"<p>Slå på og sett opp forkortelser i <b>KDevelop innstillinger</b>, fanen <b>"
"Forkortelser</b>."
#: parts/abbrev/abbrevpart.cpp:244
msgid "Abbreviations"
msgstr "Forkortelser"
#: parts/grepview/grepdlg.cpp:86 parts/grepview/grepviewpart.cpp:61
#: parts/grepview/grepviewwidget.cpp:447
msgid "Find in Files"
msgstr "Finn i filer"
#: parts/grepview/grepdlg.cpp:123
#, fuzzy
msgid "&Regular Expression"
msgstr "&Regulært uttrykk:"
#: parts/grepview/grepdlg.cpp:157
#, fuzzy
msgid "Set directory to that of the current file (Alt+Y)"
msgstr "Setter mappa til den der gjeldende fil ligger"
#: parts/grepview/grepdlg.cpp:163
#, fuzzy
msgid "Rec&ursive"
msgstr "&Rekursivt"
#: parts/grepview/grepdlg.cpp:167
#, fuzzy
msgid "Limit search to &project files"
msgstr "Sti til prosjektets tag-fil:"
#: parts/grepview/grepdlg.cpp:172
msgid "&Files:"
msgstr "&Filer:"
#: parts/grepview/grepdlg.cpp:180
#, fuzzy
msgid "&Exclude:"
msgstr "&Ekskluder i:"
#: parts/grepview/grepdlg.cpp:199
msgid "New view"
msgstr "Ny visning"
#: parts/grepview/grepdlg.cpp:203
msgid "&Suppress find errors"
msgstr ""
#: parts/grepview/grepdlg.cpp:210
#, fuzzy
msgid "Sea&rch"
msgstr "Søk"
#: parts/grepview/grepdlg.cpp:220
msgid ""
"<qt>Enter the regular expression you want to search for here."
"<p>Possible meta characters are:"
"<ul>"
"<li><b>.</b> - Matches any character"
"<li><b>^</b> - Matches the beginning of a line"
"<li><b>$</b> - Matches the end of a line"
"<li><b>\\&lt;</b> - Matches the beginning of a word"
"<li><b>\\&gt;</b> - Matches the end of a word</ul>The following repetition "
"operators exist:"
"<ul>"
"<li><b>?</b> - The preceding item is matched at most once"
"<li><b>*</b> - The preceding item is matched zero or more times"
"<li><b>+</b> - The preceding item is matched one or more times"
"<li><b>{<i>n</i>}</b> - The preceding item is matched exactly <i>n</i> times"
"<li><b>{<i>n</i>,}</b> - The preceding item is matched <i>n</i> or more times"
"<li><b>{,<i>n</i>}</b> - The preceding item is matched at most <i>n</i> times"
"<li><b>{<i>n</i>,<i>m</i>}</b> - The preceding item is matched at least <i>n</i>"
", but at most <i>m</i> times.</ul>Furthermore, backreferences to bracketed "
"subexpressions are available via the notation \\<i>n</i>.</qt>"
msgstr ""
"<qt>Oppgi det regulære uttrykket du vil søke etter her."
"<p>Mulige meta-tegn er: "
"<ul>"
"<li><b>.</b> Treffer ethvert tegn"
"<li><b>^</b> Treffer begynnelsen av ei linje"
"<li><b>$</b> Treffer slutten av ei linje "
"<li><b>\\&lt;</b> Treffer begynnelsen av et ord"
"<li><b>\\&gt;</b> Treffer slutten av et ord</ul> Følgende gjentakelsestegn "
"finnes:"
"<ul> "
"<li><b>?</b> Foregående element treffes høyst én gang"
"<li><b>*</b> Foregående element treffes ingen eller flere ganger"
"<li><b>+</b> Foregående element treffes en eller flere ganger"
"<li><b>{<i>n</i>}</b> Foregående element treffes nøyaktig <i>n</i> ganger"
"<li><b>{<i>n</i>,}</b> Foregående element treffes <i>n</i> eller flere ganger"
"<li><b>{,<i>n</i>}</b> Foregående element treffes høyst <i>n</i> ganger"
"<li><b>{<i>n</i>,<i>m</i>} </b> Foregående element treffes minst <i>n</i> "
"men høyst <i>m</i> ganger. </ul> Dessuten kan det refereres til under-uttrykk i "
"parenteser med skrivmåten \\<i>n</i>.</qt>"
#: parts/grepview/grepdlg.cpp:244
msgid ""
"Enter the file name pattern of the files to search here. You may give several "
"patterns separated by commas"
msgstr ""
"Oppgi her filnavnsmønsteret for filene det skal søkes i. Du kan oppgi flere "
"mønstre, atskilt med komma"
#: parts/grepview/grepdlg.cpp:247
#, c-format
msgid ""
"You can choose a template for the pattern from the combo box and edit it here. "
"The string %s in the template is replaced by the pattern input field, resulting "
"in the regular expression to search for."
msgstr ""
"Du kan velge en mal for mønsteret fra kombinaskonsboksen og redigere det her. "
"Strengen %s i malen erstattes med inndata-feltet i mønsteret, og gir det "
"regulære uttrykket det skal søkes etter."
#: parts/grepview/grepdlg.cpp:317
msgid "Please enter a search pattern"
msgstr "Oppgi et søkemønster"
#: parts/grepview/grepviewwidget.cpp:137 parts/grepview/grepviewwidget.cpp:460
msgid "Search Results"
msgstr "Søkeresultater"
#: parts/grepview/grepviewwidget.cpp:302
#, fuzzy
msgid "Unable to create a temporary file for search."
msgstr "Kan ikke opprette midlertidig fil «%1»"
#: parts/grepview/grepviewwidget.cpp:523
#, c-format
msgid ""
"_n: *** %n match found. ***\n"
"*** %n matches found. ***"
msgstr ""
"***%n treff funnet. ***\n"
"*** %n treff funnet. ***"
#: parts/grepview/grepviewpart.cpp:53
msgid "Grep Output"
msgstr "Grep utdata"
#: parts/grepview/grepviewpart.cpp:54
msgid ""
"<b>Find in files</b>"
"<p>This window contains the output of a grep command. Clicking on an item in "
"the list will automatically open the corresponding source file and set the "
"cursor to the line with the match."
msgstr ""
"<b>Finn i filer</b>"
"<p> Dette vinduet viser utdata fra en grep-kommando. Trykker du på et element i "
"lista blir den tilsvarende kildefila automatisk åpnet, med skrivemerket på "
"linja som ble truffet."
#: parts/grepview/grepviewpart.cpp:61
msgid "Output of the grep command"
msgstr "Utdata fra grep-kommandoen"
#: parts/grepview/grepviewpart.cpp:65
msgid "Find in Fi&les..."
msgstr "Finn i fi&ler …"
#: parts/grepview/grepviewpart.cpp:68
msgid "Search for expressions over several files"
msgstr "Søk etter uttrykk over flere filer"
#: parts/grepview/grepviewpart.cpp:69
msgid ""
"<b>Find in files</b>"
"<p>Opens the 'Find in files' dialog. There you can enter a regular expression "
"which is then searched for within all files in the directories you specify. "
"Matches will be displayed, you can switch to a match directly."
msgstr ""
"<b>Finn i filer</b>"
"<p>Åpner dialogen «Finn i filer». Der kan du oppgi et regulært uttrykk som det "
"så søkes etter i alle filer i en mappe du oppgir. Treff blir vist, og du kan "
"bytte direkte til et treff."
#: parts/grepview/grepviewpart.cpp:119
#, c-format
msgid "Grep: %1"
msgstr "Grep: %1"
#: parts/grepview/grepviewpart.cpp:121
msgid ""
"<b>Grep</b>"
"<p>Opens the find in files dialog and sets the pattern to the text under the "
"cursor."
msgstr ""
"<b>Grep</b>"
"<p>Åpner dialogen finn i filer og setter søkestrengen til teksten under "
"skrivemerket."
#: parts/texttools/texttoolspart.cpp:61 parts/texttools/texttoolspart.cpp:64
#: parts/texttools/texttoolswidget.cpp:157
msgid "Text Structure"
msgstr "Tekst-struktur"
#: parts/texttools/texttoolspart.cpp:62
msgid "<b>Text Structure</b><p>This browser shows the structure of the text."
msgstr "<b>Tekst-struktur</b><p>Denne visningen viser tekstens struktur."
#: parts/texttools/texttoolspart.cpp:64
msgid "Text structure"
msgstr "Tekst-struktur"
#: parts/filecreate/filecreate_widget3.cpp:36
msgid "File Create"
msgstr "Opprett fil"
#: parts/filecreate/filecreate_widget3.cpp:44
#, fuzzy
msgid ""
"<b>New file</b>"
"<p>This part makes the creation of new files easier. Select a type in the list "
"to create a file. The list of project file types can be configured in project "
"settings dialog, <b>New File Wizard</b> tab. Globally available file types are "
"listed and can be configured in TDevelop settings dialog, <b>New File Wizard</b> "
"tab."
msgstr ""
"<b>Ny fil</b> "
"<p> Denne delen gjør det lettere å opprette nye filer. Velg en type i lista for "
"å opprette en fil. Lista over prosjektfiltyper kan settes opp i dialogen for "
"prosjektinnstillinger, fanebladet <b>Veiviser for ny fil</b>."
#: parts/filecreate/filecreate_newfile.cpp:33
msgid ""
"_: New file dialog (title)\n"
"New File"
msgstr "Ny fil"
#: parts/filecreate/filecreate_newfile.cpp:38
msgid "<b>New File Creation</b>"
msgstr "<b>Opprette ny fil</b>"
#: parts/filecreate/filecreate_newfile.cpp:56
msgid ""
"_: Add to project (on checkbox)\n"
"&Add to project"
msgstr "&Legg til prosjekt"
#: parts/filecreate/filecreate_newfile.cpp:155
msgid "A file with this name already exists"
msgstr "En fil med dette navnet finnes fra før"
#: parts/filecreate/filecreate_newfile.cpp:155
msgid "File Exists"
msgstr "Fila finnes"
#: parts/filecreate/filecreate_part.cpp:75
#: parts/filecreate/filecreate_part.cpp:76
msgid "File Templates"
msgstr "Filmaler"
#: parts/filecreate/filecreate_part.cpp:82
msgid ""
"<b>New file</b>"
"<p>Creates a new file. Also adds it the project if the <b>Add to project</b> "
"checkbox is turned on."
msgstr ""
"<b>Ny fil</b> "
"<p>Oppretter en ny fil. Hvis det er krysset av i <b>Legg til prosjekt</b>"
", så blir fila også lagt til prosjektet."
#: buildtools/script/scriptprojectpart.cpp:57
#: parts/filecreate/filecreate_part.cpp:83
msgid "Create a new file"
msgstr "Opprett en ny fil"
#: parts/filecreate/filecreate_part.cpp:184
#: parts/fileselector/fileselector_part.cpp:99
msgid "Cannot create file. Check whether the directory and filename are valid."
msgstr ""
#: parts/filecreate/addglobaldlg.cpp:61
msgid "Template Location"
msgstr "Sted for mal"
#: parts/filecreate/addglobaldlg.cpp:92
msgid "Select Global File Types"
msgstr "Velg globale filtyper"
#: parts/filecreate/addglobaldlg.cpp:94
msgid "F1"
msgstr "F1"
#: parts/filecreate/addglobaldlg.cpp:99
msgid "Type extension:"
msgstr "Type-etternavn:"
#: parts/filecreate/addglobaldlg.cpp:100
msgid "Type name:"
msgstr "Typenavn:"
#: parts/filecreate/addglobaldlg.cpp:101
msgid "Template location:"
msgstr "Sted for mal:"
#: parts/filecreate/addglobaldlg.cpp:102
msgid "Icon:"
msgstr "Ikon:"
#: parts/filecreate/fcconfigwidget.cpp:51
msgid "Global Types"
msgstr "Globale typer"
#: parts/filecreate/fcconfigwidget.cpp:62
msgid "Project templates in "
msgstr "Prosjektmaler i "
#: parts/filecreate/fcconfigwidget.cpp:652
msgid ""
"Requested template does not exist yet.\n"
"It will be opened immediately after accepting the configuration dialog."
msgstr ""
"Den etterspurte malen finnes ikke ennå.\n"
"Den blir åpnet straks oppsettsdialogen er godtatt."
#: parts/filecreate/fcconfigwidget.cpp:677
#: parts/filecreate/fcconfigwidget.cpp:700
msgid ""
"Template for the selected file type does not exist yet.\n"
"It will be opened immediately after accepting the configuration dialog."
msgstr ""
"Mal for den valgte filtypen finnes ikke ennå.\n"
"Den blir åpnet straks oppsettsdialogen er godtatt."
#: parts/filecreate/fcconfigwidget.cpp:679
#: parts/filecreate/fcconfigwidget.cpp:702
msgid ""
"Template for the selected file type has been changed.\n"
"It will be opened immediately after accepting the configuration dialog."
msgstr ""
"Mal for den valgte filtypen er blitt endret.\n"
"Den blir åpnet straks oppsettsdialogen er godtatt."
#: parts/filecreate/filecreate_widget2.cpp:48
msgid "Use this to create new files within your project."
msgstr "Bruk dette for å opprette nye filer inne i prosjektet."
#: parts/ctags2/ctags2_part.cpp:80
msgid ""
"<b>CTags</b>"
"<p>Result view for a tag lookup. Click a line to go to the corresponding place "
"in the code."
msgstr ""
"<b>Ctags</b> "
"<p>Resultatvisning for et tag-oppslag. Trykk på en linje for å gå til "
"tilsvarende sted i koden."
#: parts/ctags2/ctags2_part.cpp:81
msgid "CTags Lookup"
msgstr "CTags-oppslag"
#: parts/ctags2/ctags2_part.cpp:82 parts/ctags2/ctags2_part.cpp:87
msgid "CTags"
msgstr "CTags"
#: parts/ctags2/ctags2_part.cpp:82
msgid "CTags lookup results"
msgstr "Resultat av CTags-oppslag"
#: parts/ctags2/ctags2_part.cpp:91
msgid "Lookup Current Text"
msgstr "Slå opp gjeldende tekst"
#: parts/ctags2/ctags2_part.cpp:92
msgid "Lookup Current Text as Declaration"
msgstr "Slå opp gjeldende tekst som deklarasjon"
#: parts/ctags2/ctags2_part.cpp:93
msgid "Lookup Current Text as Definition"
msgstr "Slå opp gjeldende tekst som definisjon"
#: parts/ctags2/ctags2_part.cpp:94
msgid "Jump to Next Match"
msgstr "Hopp til neste treff"
#: parts/ctags2/ctags2_part.cpp:95
msgid "Open Lookup Dialog"
msgstr "Åpne oppslagsdialog"
#: parts/ctags2/ctags2_part.cpp:197
#, c-format
msgid "CTags - Go to Declaration: %1"
msgstr "CTags Gå til deklarasjon: %1"
#: parts/ctags2/ctags2_part.cpp:200
#, c-format
msgid "CTags - Go to Definition: %1"
msgstr "CTags Gå til definisjon: %1"
#: parts/ctags2/ctags2_part.cpp:203
#, c-format
msgid "CTags - Lookup: %1"
msgstr "CTags Slå opp: %1"
#: parts/ctags2/ctags2_widget.cpp:107
#, c-format
msgid "Hits: %1"
msgstr "Treff: %1"
#: parts/ctags2/ctags2_widget.cpp:155
msgid "No CTags database found"
msgstr "Fant ingen CTags-database"
#: parts/ctags2/ctagskinds.cpp:29
msgid "define"
msgstr "angi"
#: parts/ctags2/ctagskinds.cpp:30 parts/ctags2/ctagskinds.cpp:98
msgid "label"
msgstr "merkelapp"
#: parts/ctags2/ctagskinds.cpp:31 parts/ctags2/ctagskinds.cpp:60
#: parts/ctags2/ctagskinds.cpp:127
msgid "macro"
msgstr "makro"
#: parts/ctags2/ctagskinds.cpp:38 parts/ctags2/ctagskinds.cpp:103
#: parts/ctags2/ctagskinds.cpp:140 parts/ctags2/ctagskinds.cpp:160
msgid "subroutine"
msgstr "subrutine"
#: parts/ctags2/ctagskinds.cpp:50
msgid "fragment definition"
msgstr "fragmentdefinisjon"
#: parts/ctags2/ctagskinds.cpp:51
msgid "any pattern"
msgstr "et mønster"
#: parts/ctags2/ctagskinds.cpp:53
msgid "pattern"
msgstr "mønster"
#: parts/ctags2/ctagskinds.cpp:59 parts/ctags2/ctagskinds.cpp:84
#: parts/ctags2/ctagskinds.cpp:111 parts/ctags2/ctagskinds.cpp:146
#: parts/ctags2/ctagskinds.cpp:153 parts/ctags2/ctagskinds.cpp:166
msgid "class"
msgstr "klasse"
#: parts/ctags2/ctagskinds.cpp:61
msgid "enumerator"
msgstr "teller"
#: parts/ctags2/ctagskinds.cpp:63
msgid "enumeration"
msgstr "opptelling"
#: parts/ctags2/ctagskinds.cpp:64
#, fuzzy
msgid "local variable"
msgstr "variabel"
#: parts/ctags2/ctagskinds.cpp:65
msgid "member"
msgstr "medlem"
#: parts/ctags2/ctagskinds.cpp:66 parts/ctags2/ctagskinds.cpp:188
msgid "namespace"
msgstr "navnerom"
#: parts/ctags2/ctagskinds.cpp:67
msgid "prototype"
msgstr "prototype"
#: parts/ctags2/ctagskinds.cpp:68
msgid "struct"
msgstr "struct"
#: parts/ctags2/ctagskinds.cpp:69
msgid "typedef"
msgstr "typedef"
#: parts/ctags2/ctagskinds.cpp:70
msgid "union"
msgstr "union"
#: parts/ctags2/ctagskinds.cpp:71 parts/ctags2/ctagskinds.cpp:105
msgid "variable"
msgstr "variabel"
#: parts/ctags2/ctagskinds.cpp:72
msgid "external variable"
msgstr "ekstern variabel"
#: parts/ctags2/ctagskinds.cpp:78
msgid "paragraph"
msgstr "avsnitt"
#: parts/ctags2/ctagskinds.cpp:85
#, fuzzy
msgid "feature"
msgstr "feature"
#: parts/ctags2/ctagskinds.cpp:86
msgid "local entity"
msgstr "lokal entitet"
#: parts/ctags2/ctagskinds.cpp:92
msgid "block"
msgstr "blokk"
#: parts/ctags2/ctagskinds.cpp:93
msgid "common"
msgstr "common"
#: parts/ctags2/ctagskinds.cpp:94
msgid "entry"
msgstr "entry"
#: parts/ctags2/ctagskinds.cpp:96 parts/ctags2/ctagskinds.cpp:113
msgid "interface"
msgstr "grensesnitt"
#: parts/ctags2/ctagskinds.cpp:97
msgid "type component"
msgstr "type komponent"
#: parts/ctags2/ctagskinds.cpp:99
msgid "local"
msgstr "lokal"
#: parts/ctags2/ctagskinds.cpp:100
msgid "module"
msgstr "modul"
#: parts/ctags2/ctagskinds.cpp:101
msgid "namelist"
msgstr "navneliste"
#: parts/ctags2/ctagskinds.cpp:102
msgid "program"
msgstr "program"
#: parts/ctags2/ctagskinds.cpp:104
msgid "type"
msgstr "type"
#: parts/ctags2/ctagskinds.cpp:112
msgid "field"
msgstr "felt"
#: parts/ctags2/ctagskinds.cpp:114
msgid "method"
msgstr "metode"
#: parts/ctags2/ctagskinds.cpp:115
msgid "package"
msgstr "pakke"
#: parts/ctags2/ctagskinds.cpp:134 parts/ctags2/ctagskinds.cpp:194
msgid "procedure"
msgstr "prosedyre"
#: parts/ctags2/ctagskinds.cpp:168
msgid "mixin"
msgstr "mixin"
#: parts/regexptest/regexptestpart.cpp:35
msgid "Debug Regular Expression..."
msgstr "Feilsøk regulært uttrykk …"
#: parts/regexptest/regexptestpart.cpp:38
msgid "Debug regular expression"
msgstr "Feilsøk regulært uttrykk"
#: parts/regexptest/regexptestpart.cpp:39
#, fuzzy
msgid ""
"<b>Debug regular expression</b>"
"<p>Allows to enter a regular expression and validate it. It is possible to "
"check syntax of basic POSIX, extended POSIX regular expressions and also syntax "
"allowed by TQRegExp and KRegExp classes."
msgstr ""
"<b>Feilsøk regulært uttrykk</b> "
"<p>Gir mulighet til å oppgi et regulært uttrykk og validere det. Det er mulig å "
"sjekke syntaks for grunnleggende POSIX, utvidet POSIX-uttrykk og også syntaks "
"som tillatt i QRegExp og KRegExp-klassene."
#: parts/regexptest/regexptestdlg.cpp:85
#: parts/regexptest/regexptestdlg.cpp:103
#: parts/regexptest/regexptestdlg.cpp:179
msgid "No match"
msgstr "Ingen treff"
#: parts/regexptest/regexptestdlg.cpp:88
#: parts/regexptest/regexptestdlg.cpp:106
#: parts/regexptest/regexptestdlg.cpp:183
msgid "Successfully matched"
msgstr "Vellykket treff"
#: parts/regexptest/regexptestdlg.cpp:99
msgid "Compile error, your regexp is invalid"
msgstr "Kompileringsfeil, det regulære uttrykket er ugyldig"
#: parts/regexptest/regexptestdlg.cpp:126
msgid "Repetition operators must not appear as first character"
msgstr "Repetisjonsoperatorer må ikke opptre som første tegn"
#: parts/regexptest/regexptestdlg.cpp:129
msgid "Invalid use of back reference operator"
msgstr "Ugyldig bruk av referanseoperator"
#: parts/regexptest/regexptestdlg.cpp:132
msgid "Unmatched brace interval operators"
msgstr "Krøllparentes i intervalloperatorer mangler makker"
#: parts/regexptest/regexptestdlg.cpp:135
msgid "Unmatched bracket list operators"
msgstr "Klammer i listeoperator mangler makker"
#: parts/regexptest/regexptestdlg.cpp:138
msgid "Invalid use of range operator"
msgstr "Ugyldig bruk av områdeoperator"
#: parts/regexptest/regexptestdlg.cpp:141
msgid "Unknown character class"
msgstr "Ukjent tegnklasse"
#: parts/regexptest/regexptestdlg.cpp:144
msgid "Invalid collating element"
msgstr "Ugyldig sorteringselement"
#: parts/regexptest/regexptestdlg.cpp:147
msgid "Unmatched parenthesis group operators"
msgstr "Gruppeoperator-parenteser uten makker"
#: parts/regexptest/regexptestdlg.cpp:150
msgid "Invalid back reference to subexpression"
msgstr "Ugyldig tilbakereferanse til deluttrykk"
#: parts/regexptest/regexptestdlg.cpp:153
msgid "Trailing backslash"
msgstr "Slutter med baklengs skråstrek"
#: parts/regexptest/regexptestdlg.cpp:156
msgid "Invalid use of pattern operators"
msgstr "Ugyldig bruk av mønsteroperatorer"
#: parts/regexptest/regexptestdlg.cpp:160
msgid "Regular expression too large"
msgstr "Regulært uttrykk er for stort"
#: parts/regexptest/regexptestdlg.cpp:164
msgid "Unknown error"
msgstr "Ukjent feil"
#: parts/outputviews/makeactionfilter.cpp:75
#: parts/outputviews/makeactionfilter.cpp:76
#: parts/outputviews/makeactionfilter.cpp:77
#: parts/outputviews/makeactionfilter.cpp:96
#: parts/outputviews/makeactionfilter.cpp:211
msgid "compiling"
msgstr "kompilerer"
#: parts/outputviews/makeactionfilter.cpp:79
#, fuzzy
msgid "built"
msgstr "Stille"
#: parts/outputviews/makeactionfilter.cpp:80
#: parts/outputviews/makeactionfilter.cpp:83
#: parts/outputviews/makeactionfilter.cpp:84
#: parts/outputviews/makeactionfilter.cpp:95
msgid "generating"
msgstr "lager"
#: parts/outputviews/makeactionfilter.cpp:86
#: parts/outputviews/makeactionfilter.cpp:88
#: parts/outputviews/makeactionfilter.cpp:89
#: parts/outputviews/makeactionfilter.cpp:90
#: parts/outputviews/makeactionfilter.cpp:91
msgid "linking"
msgstr "linker"
#: parts/outputviews/makeactionfilter.cpp:93
msgid "creating"
msgstr "lager"
#: parts/outputviews/makeactionfilter.cpp:94
#: parts/outputviews/makeactionfilter.cpp:97
msgid "installing"
msgstr "installerer"
#: parts/outputviews/makeitem.cpp:124
msgid "*** Compilation aborted ***"
msgstr "*** Kompilering avbrutt ***"
#: parts/outputviews/makeitem.cpp:129
msgid "*** Success ***"
msgstr "*** Vellykket ***"
#: parts/outputviews/makeitem.cpp:142
#, c-format
msgid "Entering directory %1"
msgstr "Går inn i mappe %1"
#: parts/outputviews/makeitem.cpp:149
#, c-format
msgid "Leaving directory %1"
msgstr "Går ut av mappe %1"
#: parts/outputviews/makeviewpart.cpp:44
#: parts/outputviews/outputviewsfactory.cpp:14
msgid "Messages Output"
msgstr "Meldingsvindu"
#: parts/outputviews/appoutputviewpart.cpp:45
msgid "Application Output"
msgstr "Utdata fra program"
#: parts/outputviews/appoutputviewpart.cpp:46
msgid ""
"<b>Application output</b>"
"<p>The stdout/stderr output window is a replacement for terminal-based "
"application communication. Running terminal applications use this instead of a "
"terminal window."
msgstr ""
"<b>Utdata fra program</b> "
"<p>Utdatavinduet for stdout/stderr er en erstatning for terminalbasert "
"kommunikasjon med programmet. Kjørende terminalprogrammer bruker dette i stedet "
"for et terminalvindu."
#: parts/outputviews/appoutputviewpart.cpp:51
msgid "Output of the executed user program"
msgstr "Utdata fra det kjørte brukerprogrammet"
#: parts/outputviews/appoutputviewpart.cpp:108
msgid "Press Enter to continue!"
msgstr "Trykk linjeskift for å fortsette!"
#: parts/outputviews/appoutputwidget.cpp:82
#, c-format
msgid "Assertion failed: %1"
msgstr "Påstand feilet: %1"
#: parts/outputviews/appoutputwidget.cpp:254
#, fuzzy
msgid "Clear output"
msgstr "Utdata fra &kompilator:"
#: parts/outputviews/appoutputwidget.cpp:257
#, fuzzy
msgid "Copy selected lines"
msgstr "Oppdater valgt element"
#: parts/outputviews/appoutputwidget.cpp:260
#, fuzzy
msgid "Save unfiltered"
msgstr "Lagre valgt"
#: parts/outputviews/appoutputwidget.cpp:261
#, fuzzy
msgid "Save filtered output"
msgstr "Filtrer utdata"
#: parts/outputviews/appoutputwidget.cpp:268
#, fuzzy
msgid "Edit filter"
msgstr "R&ediger filer"
#: parts/outputviews/makeviewpart.cpp:45
msgid ""
"<b>Messages output</b>"
"<p>The messages window shows the output of the compiler and used build tools "
"like make, ant, uic, dcopidl etc. For compiler error messages, click on the "
"error message. This will automatically open the source file and set the cursor "
"to the line that caused the compiler error/warning."
msgstr ""
"<b>Meldingsvindu</b> <o>Meldingsvinduet viser utdata fra kompilatoren og "
"verktøy brukt i byggeprosessen slik som make, ant, uic, dcopidl osv. Trykk på "
"feilmeldinger fra kompilatoren. Dette åpner automatisk kildefila og plasserer "
"markøren på den linja som forårsaket meldinga fra kompilatoren."
#: parts/outputviews/makeviewpart.cpp:52
msgid "Compiler output messages"
msgstr "Kompilatormeldinger"
#: parts/outputviews/makeviewpart.cpp:55
msgid "&Next Error"
msgstr "&Neste feil"
#: parts/outputviews/makeviewpart.cpp:57
msgid "Go to the next error"
msgstr "Gå til neste feil"
#: parts/outputviews/makeviewpart.cpp:58
msgid ""
"<b>Next error</b>"
"<p>Switches to the file and line where the next error was reported from."
msgstr ""
"<b> Neste feil</b> "
"<p>Bytter til den fila og linja der neste feil ble meldt fra."
#: parts/outputviews/makeviewpart.cpp:59
msgid "&Previous Error"
msgstr "&Forrige feil"
#: parts/outputviews/makeviewpart.cpp:61
msgid "Go to the previous error"
msgstr "Gå til forrige feil"
#: parts/outputviews/makeviewpart.cpp:62
msgid ""
"<b>Previous error</b>"
"<p>Switches to the file and line where the previous error was reported from."
msgstr ""
"<b>Forrige feil</b> "
"<p>Bytter til den fila og linja der forrige feil ble meldt fra."
#: parts/outputviews/makewidget.cpp:569
msgid "The process has finished with errors"
msgstr "Prosessen avsluttet med feil"
#: parts/outputviews/makewidget.cpp:574
msgid "The process has finished successfully"
msgstr "Prosessen er fullført uten feil"
#: parts/outputviews/makewidget.cpp:701
msgid "Line Wrapping"
msgstr "Linjebryting"
#: parts/outputviews/makewidget.cpp:703
msgid ""
"<b>Line wrapping</b>"
"<p>Enables or disables wrapping of command lines displayed."
msgstr ""
"<b>Linjebryting</b> "
"<p>Slår på eller av linjebryting i de viste kommandolinjene."
#: parts/outputviews/makewidget.cpp:706
msgid "Very Short Compiler Output"
msgstr "Svært korte utdata fra kompilator"
#: parts/outputviews/makewidget.cpp:707
msgid ""
"<b>Very short compiler output</b>"
"<p>Displays only warnings, errors and the file names which are compiled."
msgstr ""
"<b>Svært korte utdata fra kompilator</b> "
"<p>Viser bare advarsler, feil og navn på filer som er kompilert."
#: parts/outputviews/makewidget.cpp:709
msgid "Short Compiler Output"
msgstr "Korte utdata fra kompilator"
#: parts/outputviews/makewidget.cpp:710
msgid ""
"<b>Short compiler output</b>"
"<p>Suppresses all the compiler flags and formats to something readable."
msgstr ""
"<b>Korte utdata fra kompilator</b> "
"<p>Undertrykker alle kompilatorinnstillinger, og formaterer til noe leselig."
#: parts/outputviews/makewidget.cpp:712
msgid "Full Compiler Output"
msgstr "Full utdata fra kompilator"
#: parts/outputviews/makewidget.cpp:713
msgid "<b>Full compiler output</b><p>Displays unmodified compiler output."
msgstr ""
"<b>Full utdata fra kompilator</b>"
"<p>Viser uendret utdata fra kompilator."
#: parts/outputviews/makewidget.cpp:717
msgid "Show Directory Navigation Messages"
msgstr "Vis meldinger om navigering i mapper"
#: parts/outputviews/makewidget.cpp:718
msgid ""
"<b>Show directory navigation messages</b>"
"<p>Shows <b>cd</b> commands that are executed while building."
msgstr ""
"<b>Vis meldinger om navigering i mapper</b> "
"<p>Viser <b>cd</b>-kommandoer som kjøres under byggingen."
#: parts/fileselector/tdeactionselector.cpp:70
msgid "&Available:"
msgstr "&Tilgjengelig:"
#: parts/fileselector/tdeactionselector.cpp:85
msgid "&Selected:"
msgstr "&Valgt:"
#: parts/fileselector/fileselector_part.cpp:50
#: parts/fileselector/fileselector_part.cpp:52
#: parts/fileselector/fileselector_part.cpp:85
msgid "File Selector"
msgstr "Filvelger"
#: parts/fileselector/fileselector_part.cpp:52
msgid "File selector"
msgstr "Filvelger"
#: parts/fileselector/fileselector_part.cpp:53
msgid ""
"<b>File selector</b>"
"<p>This file selector lists directory contents and provides some file "
"management functions."
msgstr ""
"<b>Filvelger</b> "
"<p>Denne filvelgeren viser mappeinnholdet og har noen funksjoner for "
"filhåndtering."
#: buildtools/script/scriptprojectpart.cpp:53
#: parts/fileselector/fileselector_part.cpp:57
msgid "New File..."
msgstr "Ny fil …"
#: parts/fileselector/fileselector_widget.cpp:188
msgid "Current Document Directory"
msgstr "Gjeldende dokumentmappe"
#: parts/fileselector/fileselector_widget.cpp:217
msgid ""
"<p>Here you can enter a path for a directory to display."
"<p>To go to a directory previously entered, press the arrow on the right and "
"choose one. "
"<p>The entry has directory completion. Right-click to choose how completion "
"should behave."
msgstr ""
"<p>Her kan det oppgis en sti til en mappe som skal vises. "
"<p>Trykk på pila til høyre og velg en mappe, hvis det er brukt noen fra før. "
"<p>Det kan brukes navnefullføring her. Trykk høyre museknapp for å velge "
"hvordan fullføringen skal oppføre seg,"
#: parts/fileselector/fileselector_widget.cpp:223
msgid ""
"<p>Here you can enter a name filter to limit which files are displayed."
"<p>To clear the filter, toggle off the filter button to the left."
"<p>To reapply the last filter used, toggle on the filter button."
msgstr ""
"<p>Du kan oppgi et navnefilter for å begrense antall filer som blir vist."
"<p>For å fjerne filtere, slå av filterknappen til venstre."
"<p>For å komme tilbake til filteret du brukte sist, slå på filterknappen igjen."
#: parts/fileselector/fileselector_widget.cpp:588
msgid "Toolbar"
msgstr "Verktøylinje"
#: parts/fileselector/fileselector_widget.cpp:590
msgid "A&vailable actions:"
msgstr "Tilgjengelige &handlinger:"
#: parts/fileselector/fileselector_widget.cpp:591
msgid "S&elected actions:"
msgstr "&Valgte handlinger:"
#: parts/fileselector/fileselector_widget.cpp:599
msgid "Auto Synchronization"
msgstr "Automatisk synkronisering"
#: parts/fileselector/fileselector_widget.cpp:600
msgid "When a docu&ment becomes active"
msgstr "Når du &går til et dokument"
#: parts/fileselector/fileselector_widget.cpp:601
msgid "When a document is o&pened"
msgstr "Når et dokument &åpnes"
#: parts/fileselector/fileselector_widget.cpp:602
msgid "When the file selector becomes visible"
msgstr "Når du viser filvalgruta"
#: parts/fileselector/fileselector_widget.cpp:610
msgid "Remember &locations:"
msgstr "Husk &adresser:"
#: parts/fileselector/fileselector_widget.cpp:617
msgid "Remember &filters:"
msgstr "Husk &filtre:"
#: parts/fileselector/fileselector_widget.cpp:624
msgid "Session"
msgstr "Økt"
#: parts/fileselector/fileselector_widget.cpp:625
msgid "Restore loca&tion"
msgstr "Gjenopprett &adresse"
#: parts/fileselector/fileselector_widget.cpp:626
msgid "Restore last f&ilter"
msgstr "Gjenopprett siste f&ilter"
#: parts/fileselector/fileselector_widget.cpp:646
msgid ""
"<p>Decides how many locations to keep in the history of the location combo box"
msgstr ""
"<p>Bestemmer hvor mange adresser som skal huskes i historien til "
"adresse-kombiboksen."
#: parts/fileselector/fileselector_widget.cpp:653
msgid ""
"<p>Decides how many filters to keep in the history of the filter combo box"
msgstr ""
"<p>Bestemmer hvor mange filtre som skal huskes i historien til "
"filter-kombiboksen."
#: parts/fileselector/fileselector_widget.cpp:660
msgid ""
"<p>These options allow you to have the File Selector automatically change "
"location to the directory of the active document on certain events."
"<p>Auto synchronization is <em>lazy</em>, meaning it will not take effect until "
"the file selector is visible."
"<p>None of these are enabled by default, but you can always sync the location "
"by pressing the sync button in the toolbar."
msgstr ""
"<p>Disse innstillingene gjør at filvelgeren, ved visse hendelser, kan "
"automatisk endre sted til mappa derdet aktive dokumentet ligger. "
"<p>Autosyknronisering er <em>doven</em>, dvs. den får ikke effekt før "
"filvelgeren er synlig. "
"<p>Ingen av disse innstillingene er aktive som standard, men adressen kan "
"alltid synkroniseres ved å trykke «Synk»-knappen på verktøylinja."
#: parts/fileselector/fileselector_widget.cpp:671
msgid ""
"<p>If this option is enabled (default), the location will be restored when you "
"start KDev."
"<p><strong>Note</strong> that if the session is handled by the TDE session "
"manager, the location is always restored."
msgstr ""
"<p>Hvis dette er slått på (standard) blir adressen lastet inn når KDev startes. "
"<p><strong>Merk</strong> at hvis økta styres av TDEs øktbehandler blir adressen "
"alltid lastet inn."
#: parts/fileselector/fileselector_widget.cpp:676
msgid ""
"<p>If this option is enabled (default), the current filter will be restored "
"when you start KDev."
"<p><strong>Note</strong> that if the session is handled by the TDE session "
"manager, the filter is always restored."
"<p><strong>Note</strong> that some of the autosync settings may override the "
"restored location if on."
msgstr ""
"<p>Hvis dette er slått på (standard) blir det gjeldende filteret lastet inn når "
"KDev startes."
"<p><strong>Merk</strong> at hvis økta styres av TDEs øktbehandter blir filterer "
"alltid lastet inn. "
"<p><strong>Merk</strong> at noen av autosynk-innstillingene kan overstyre den "
"adressen som lastes inn hvis de er slått på."
#: parts/replace/replace_part.cpp:43
msgid ""
"<b>Replace</b>"
"<p>This window shows a preview of a string replace operation. Uncheck a line to "
"exclude that replacement. Uncheck a file to exclude the whole file from the "
"operation. Clicking on a line in the list will automatically open the "
"corresponding source file and set the cursor to the line with the match."
msgstr ""
"<b>Erstatt</b>"
"<p>Dette vinduet viser en forhåndsvisning av en streng-erstatning. Ta vekk "
"kryss ved en linje for å utelate den erstatningen. Ta vekk kryss ved en fil for "
"å utelate hele fila fra handlingen. Trykker du på en linje i lista blir den "
"tilsvarende kildefila automatisk åpnet med skrivemerket på linja med treffet."
#: parts/replace/replace_part.cpp:52 parts/replace/replace_part.cpp:57
msgid "Project wide string replacement"
msgstr "Strengerstatning over hele prosjektet"
#: parts/replace/replace_part.cpp:55
msgid "Find-Select-Replace..."
msgstr "Finn-velg-erstatt …"
#: parts/replace/replace_part.cpp:58
msgid ""
"<b>Find-Select-Replace</b>"
"<p>Opens the project wide string replacement dialog. There you can enter a "
"string or a regular expression which is then searched for within all files in "
"the locations you specify. Matches will be displayed in the <b>Replace</b> "
"window, you can replace them with the specified string, exclude them from "
"replace operation or cancel the whole replace."
msgstr ""
"<b>Finn-velg-erstatt</b>"
"<p>Åpner dialogen for strengerstatning over hele prosjektet. Der kan du oppgi "
"en streng eller et regulært uttrykk som det så blir søkt etter i alle filer på "
"de steder du oppgir. Treff blir vist i <b>Erstatt</b>"
"- vinduet, du kan erstatte dem med den oppgitte strengen, utelate dem fra "
"erstatningshandlinga eller avbryte hele erstatningen."
#: parts/replace/replace_part.cpp:102
#, fuzzy, c-format
msgid "Replace Project Wide: %1"
msgstr "Relativ til prosjektfila"
#: parts/replace/replace_part.cpp:104
#, fuzzy
msgid ""
"<b>Replace Project Wide</b>"
"<p>Opens the find in files dialog and sets the pattern to the text under the "
"cursor."
msgstr ""
"<b>Grep</b>"
"<p>Åpner dialogen finn i filer og setter søkestrengen til teksten under "
"skrivemerket."
#: editors/editor-chooser/editorchooser_part.cpp:35
msgid "Editor"
msgstr "Redigerer"
#: buildtools/ada/adaproject_part.cpp:59
#: buildtools/autotools/autoprojectpart.cpp:216
#: buildtools/custommakefiles/customprojectpart.cpp:140
#: buildtools/pascal/pascalproject_part.cpp:68
#: embedded/visualboyadvance/visualboyadvance_part.cpp:33
#: languages/python/pythonsupportpart.cpp:63
msgid "Execute Program"
msgstr "Kjør programmet"
#: buildtools/autotools/addfiledlg.cpp:72
#: buildtools/script/scriptnewfiledlg.cpp:80
msgid "Please enter the file name without '/' and so on."
msgstr ""
#: buildtools/script/scriptnewfiledlg.cpp:90
msgid "A file with this name already exists."
msgstr ""
#: buildtools/script/scriptnewfiledlg.cpp:99
msgid "A file template for this extension does not exist."
msgstr ""
#: buildtools/script/scriptnewfiledlg.cpp:111
msgid "Could not create the new file."
msgstr "Klarte ikke å lage den nye fila."
#: buildtools/script/scriptprojectpart.cpp:56
msgid "<b>New file</b><p>Creates a new file."
msgstr ""
#: buildtools/script/scriptprojectpart.cpp:59
#, fuzzy
msgid "Rescan Project"
msgstr "&Rydd prosjektet"
#: buildtools/lib/widgets/addenvvardlg.cpp:34
msgid "Add Environment Variable"
msgstr "Legg til miljøvariabel"
#: buildtools/lib/widgets/addenvvardlg.cpp:42
msgid "&Value:"
msgstr "&Verdi:"
#: buildtools/lib/widgets/addfilesdialog.cpp:35
#: buildtools/lib/widgets/addfilesdialog.cpp:54
msgid "Copy File(s)"
msgstr "Kopier fil(er)"
#: buildtools/lib/widgets/addfilesdialog.cpp:36
#: buildtools/lib/widgets/addfilesdialog.cpp:55
msgid "Create Symbolic Link(s)"
msgstr "Opprett symbolsk(e) lenke(r)"
#: buildtools/lib/widgets/addfilesdialog.cpp:37
#: buildtools/lib/widgets/addfilesdialog.cpp:56
msgid "Add Relative Path(s)"
msgstr "Legg til relativ(e) sti(er)"
#: buildtools/autotools/autolistviewitems.cpp:134
msgid "Edit Substitution"
msgstr ""
#: buildtools/autotools/autolistviewitems.cpp:134
msgid "Substitution:"
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:179
#: buildtools/autotools/autosubprojectview.cpp:175
msgid "Options..."
msgstr "Valg …"
#: buildtools/autotools/autosubprojectview.cpp:177
msgid ""
"<qt><b>Options</b>"
"<p>Shows subproject options dialog that provides settings for compiler, include "
"paths, prefixes and build order.</qt>"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:182
#: buildtools/autotools/autosubprojectview.cpp:183
#, fuzzy
msgid "Add new subproject..."
msgstr "Legg til nytt underprosjekt"
#: buildtools/autotools/autosubprojectview.cpp:185
#, fuzzy
msgid ""
"<qt><b>Add new subproject</b>"
"<p>Creates a new subproject in currently selected subproject.</qt>"
msgstr ""
"<b>Opprett ny fil</b> "
"<p>Oppretter en ny fil og legger den til det valgte målet."
#: buildtools/autotools/autosubprojectview.cpp:189
#: buildtools/qmake/trollprojectwidget.cpp:1031
msgid "Remove Subproject..."
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:191
msgid ""
"<qt><b>Remove subproject</b>"
"<p>Removes the subproject. Asks if the subproject should be also removed from "
"disk. Only subprojects which do not hold other subprojects can be removed.</qt>"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:194
msgid "Add Existing Subprojects..."
msgstr "Legg til eksisterende underprosjekter …"
#: buildtools/autotools/autosubprojectview.cpp:196
msgid ""
"<qt><b>Add existing subprojects</b>"
"<p>Imports existing subprojects containing Makefile.am.</qt>"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:199
#: buildtools/autotools/autosubprojectview.cpp:200
msgid "Add Target..."
msgstr "Legg til mål …"
#: buildtools/autotools/autosubprojectview.cpp:202
msgid ""
"<qt><b>Add target</b>"
"<p>Adds a new target to the currently selected subproject. Target can be a "
"binary program, library, script, also a collection of data or header files.</qt>"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:208
#: buildtools/autotools/autosubprojectview.cpp:209
msgid "Add Service..."
msgstr "Legg til tjeneste …"
#: buildtools/autotools/autosubprojectview.cpp:211
msgid ""
"<qt><b>Add service</b>"
"<p>Creates a .desktop file describing the service.</qt>"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:214
#: buildtools/autotools/autosubprojectview.cpp:215
msgid "Add Application..."
msgstr "Legg til program …"
#: buildtools/autotools/autosubprojectview.cpp:217
msgid "<qt><b>Add application</b><p>Creates an application .desktop file.</qt>"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:223
msgid ""
"<qt><b>Build</b>"
"<p>Runs <b>make</b> from the directory of the selected subproject."
"<br> Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab.</qt>"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:229
msgid "Force Reedit"
msgstr "Tvunget omredigering"
#: buildtools/autotools/autosubprojectview.cpp:231
msgid ""
"<qt><b>Force Reedit</b>"
"<p>Runs <b>make force-reedit</b> from the directory of the selected subproject."
"<br>This recreates makefile (tip: and solves most of .moc related problems)"
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab.</qt>"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:241
#: buildtools/qmake/trollprojectwidget.cpp:1004
msgid "Clean"
msgstr "Ren"
#: buildtools/autotools/autosubprojectview.cpp:243
msgid ""
"<qt><b>Clean</b>"
"<p>Runs <b>make clean</b> from the directory of the selected subproject."
"<br> Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab.</qt>"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:155
#: buildtools/autotools/autoprojectpart.cpp:158
#: buildtools/autotools/autosubprojectview.cpp:248
#: buildtools/custommakefiles/customprojectpart.cpp:107
#: buildtools/custommakefiles/customprojectpart.cpp:110
#: buildtools/qmake/trollprojectwidget.cpp:1000
msgid "Install"
msgstr "Installer"
#: buildtools/autotools/autosubprojectview.cpp:250
msgid ""
"<qt><b>Install</b>"
"<p>Runs <b>make install</b> from the directory of the selected subproject."
"<br> Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab.</qt>"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:164
#: buildtools/autotools/autosubprojectview.cpp:254
#: buildtools/custommakefiles/customprojectpart.cpp:123
msgid "Install (as root user)"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:256
msgid ""
"<qt><b>Install as root user</b>"
"<p>Runs <b>make install</b> command from the directory of the selected "
"subproject with root privileges."
"<br> It is executed via tdesu command."
"<br> Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab.</qt>"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:263
msgid "Expand Subtree"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:265
msgid "Collapse Subtree"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:268
msgid "Manage Custom Commands..."
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:270
msgid ""
"<qt><b>Manage custom commands</b>"
"<p>Allows to create, edit and delete custom build commands which appears in the "
"subproject context menu."
"<br></qt>"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:283
#, c-format
msgid "Subproject: %1"
msgstr "Underprosjekt: %1"
#: buildtools/autotools/autosubprojectview.cpp:353
msgid "Add New Subproject to '%1'"
msgstr "Legg til nytt underprosjekt til «%1»"
#: buildtools/autotools/autosubprojectview.cpp:365
msgid "Add Existing Subproject to '%1'"
msgstr "Legg til eksisterende underprosjekt til «%1»"
#: buildtools/autotools/autosubprojectview.cpp:380
msgid "Add New Target to '%1'"
msgstr "Legg til nytt mål til «%1»"
#: buildtools/autotools/autosubprojectview.cpp:395
msgid "Add New Service to '%1'"
msgstr "Legg til ny tjeneste til «%1»"
#: buildtools/autotools/autosubprojectview.cpp:410
msgid "Add New Application to '%1'"
msgstr "Legg til nytt program til «%1»"
#: buildtools/autotools/autosubprojectview.cpp:438
msgid "This item cannot be removed"
msgstr "Dette elementet kan ikke fjernes"
#: buildtools/autotools/autoprojectpart.cpp:83
#: buildtools/autotools/autoprojectpart.cpp:90
#: buildtools/autotools/autosubprojectview.cpp:438
msgid "Automake Manager"
msgstr ""
#: buildtools/autotools/autosubprojectview.cpp:451
msgid "There is no subproject %1 in SUBDIRS"
msgstr "Det er ikke noe underprosjekt %1 i SUBDIRS"
#: buildtools/autotools/autosubprojectview.cpp:456
#, c-format
msgid "Remove Subproject %1"
msgstr "Fjern underprosjekt %1"
#: buildtools/autotools/autosubprojectview.cpp:457
msgid "Do you really want to remove subproject %1 with all targets and files?"
msgstr ""
"Er du sikker på at du vil fjerne underprosjektet %1 med alle mål og filer?"
#: buildtools/autotools/autosubprojectview.cpp:1020
msgid "Manage Custom Commands"
msgstr ""
#: buildtools/autotools/configureoptionswidget.cpp:239
msgid "Re-run configure for %1 now?"
msgstr ""
#: buildtools/autotools/configureoptionswidget.cpp:239
msgid "Rerun"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:654
#: buildtools/autotools/autoprojectpart.cpp:665
#: buildtools/autotools/configureoptionswidget.cpp:239
#: buildtools/qmake/trollprojectwidget.cpp:2186
msgid "Do Not Run"
msgstr ""
#: buildtools/autotools/configureoptionswidget.cpp:398
#: buildtools/pascal/pascalproject_part.cpp:450
msgid ""
"There was an error loading the module %1.\n"
"The diagnostics is:\n"
"%2"
msgstr ""
"Det oppsto en feil under lasting av modulen %1.\n"
"Diagnosen er:\n"
"%2"
#: buildtools/autotools/addtranslationdlg.cpp:37
msgid "Add Translation"
msgstr "Legg til oversettelse"
#: buildtools/autotools/addtranslationdlg.cpp:79
msgid "Your sourcecode is already translated to all supported languages."
msgstr ""
"Dine kildefiler er allerede oversatt til alle de språkene som er støttet."
#: buildtools/autotools/addtranslationdlg.cpp:97
msgid "A translation file for the language %1 exists already."
msgstr "Det finnes fra før en oversettelsesfil for språket %1."
#: buildtools/autotools/autodetailsview.cpp:285
#: buildtools/autotools/targetoptionsdlg.cpp:40
msgid "Target Options for '%1'"
msgstr ""
#: buildtools/autotools/targetoptionsdlg.cpp:47
msgid "Link convenience libraries inside project (LDADD)"
msgstr ""
#: buildtools/autotools/targetoptionsdlg.cpp:48
msgid "Link libraries outside project (LDADD)"
msgstr ""
#: buildtools/autotools/targetoptionsdlg.cpp:295
msgid ""
"Add Library: Choose the .a/.so file, give -l<libname> "
"or use a variable with $(FOOBAR)"
msgstr ""
#: buildtools/autotools/targetoptionsdlg.cpp:297
#: buildtools/qmake/projectconfigurationdlg.cpp:1465
#, fuzzy
msgid "Shared Library (*.so)"
msgstr "D&elt bibliotek"
#: buildtools/autotools/targetoptionsdlg.cpp:297
#: buildtools/qmake/projectconfigurationdlg.cpp:1465
#, fuzzy
msgid "Static Library (*.a)"
msgstr "S&tatisk bibliotek"
#: buildtools/autotools/targetoptionsdlg.cpp:337
msgid "Edit External Library"
msgstr ""
#: buildtools/autotools/targetoptionsdlg.cpp:337
msgid "Edit external library:"
msgstr ""
#: buildtools/autotools/addexistingdirectoriesdlg.cpp:60
msgid ""
"Drag one or more directories with an existing Makefile.am from the left view "
"and drop it here."
msgstr ""
#: buildtools/autotools/kimporticonview.cpp:66
msgid "Or just use the buttons."
msgstr ""
#: buildtools/autotools/addexistingfilesdlg.cpp:75
#: buildtools/autotools/addfiledlg.cpp:51
#: buildtools/autotools/autodetailsview.cpp:315
#: buildtools/autotools/autodetailsview.cpp:337
#: buildtools/autotools/autodetailsview.cpp:419
#: buildtools/autotools/autodetailsview.cpp:498
#: buildtools/autotools/removefiledlg.cpp:74
#: buildtools/autotools/removetargetdlg.cpp:52
msgid "%1 in %2"
msgstr ""
#: buildtools/autotools/addexistingfilesdlg.cpp:88
msgid "Drag one or more files from the left view and drop it here."
msgstr ""
#: buildtools/autotools/addexistingfilesdlg.cpp:203
msgid ""
"The following file(s) already exist(s) in the target!\n"
"Press Continue to import only the new files.\n"
"Press Cancel to abort the complete import."
msgstr ""
#: buildtools/autotools/addexistingfilesdlg.cpp:235
#, c-format
msgid "Importing... %p%"
msgstr ""
#: buildtools/autotools/addexistingfilesdlg.cpp:261
msgid ""
"The following file(s) are not in the Subproject directory.\n"
"Press Link to add the files by creating symbolic links.\n"
"Press Copy to copy the files into the directory."
msgstr ""
#: buildtools/autotools/addexistingfilesdlg.cpp:264
msgid "Link (recommended)"
msgstr ""
#: buildtools/autotools/addexistingfilesdlg.cpp:264
msgid "Copy (not recommended)"
msgstr ""
#: buildtools/autotools/managecustomcommand.cpp:46
msgid ""
"_: this is a list of items in the combobox\n"
"Make target,Make target (as root),Make command,Make command (as "
"root),Command,Command (as root)"
msgstr ""
#: buildtools/autotools/choosetargetdialog.cpp:265
msgid ""
"The file %1 already exists in the chosen target.\n"
"The file will be created but will not be added to the target.\n"
"Rename the file and select 'Add Existing Files' from the Automake Manager."
msgstr ""
"Fila %1 finnes allerede i det valgte målet.\n"
"Fila vil bli opprettet, men ikke lagt til målet.\n"
"Gi fila nytt navn og velg «Legg til eksisterende filer» fra "
"Automake-behandleren."
#: buildtools/autotools/choosetargetdialog.cpp:267
msgid "Error While Adding Files"
msgstr "Feil ved tillegg av filer"
#: buildtools/autotools/fileselectorwidget.cpp:65
msgid "Short View"
msgstr "Kort visning"
#: buildtools/autotools/fileselectorwidget.cpp:84
msgid "Home directory"
msgstr "Hjemmekatalog"
#: buildtools/autotools/fileselectorwidget.cpp:87
msgid "Up one level"
msgstr "Opp ett nivå"
#: buildtools/autotools/fileselectorwidget.cpp:90
msgid "Previous directory"
msgstr "Forrige katalog"
#: buildtools/autotools/fileselectorwidget.cpp:93
msgid "Next directory"
msgstr "Neste mappe"
#: buildtools/autotools/subprojectoptionsdlg.cpp:48
msgid "Subproject Options for '%1'"
msgstr ""
#: buildtools/autotools/subprojectoptionsdlg.cpp:305
msgid ""
"Add Include directory: Choose directory, give -Idirectory or use a variable "
"with -I$(FOOBAR)"
msgstr ""
#: buildtools/autotools/subprojectoptionsdlg.cpp:331
msgid "Edit Include Directory"
msgstr ""
#: buildtools/autotools/subprojectoptionsdlg.cpp:331
msgid "Edit include directory:"
msgstr ""
#: buildtools/autotools/subprojectoptionsdlg.cpp:360
msgid "Edit Prefix"
msgstr ""
#: buildtools/autotools/addtargetdlg.cpp:40
#: buildtools/autotools/autoprojectwidget.cpp:61
msgid "Program"
msgstr "Program"
#: buildtools/autotools/addtargetdlg.cpp:41
#: buildtools/autotools/autoprojectwidget.cpp:63
msgid "Library"
msgstr "Bibliotek"
#: buildtools/autotools/addtargetdlg.cpp:42
#: buildtools/autotools/autoprojectwidget.cpp:65
msgid "Libtool Library"
msgstr "Libtool-bibliotek"
#: buildtools/autotools/addtargetdlg.cpp:43
#: buildtools/autotools/autoprojectwidget.cpp:67
msgid "Script"
msgstr "Skript"
#: buildtools/autotools/addtargetdlg.cpp:44
#: buildtools/autotools/autoprojectwidget.cpp:69
msgid "Header"
msgstr "Topptekst"
#: buildtools/autotools/addtargetdlg.cpp:45
msgid "Data File"
msgstr "Datafil"
#: buildtools/autotools/addtargetdlg.cpp:46
#: buildtools/autotools/autoprojectwidget.cpp:73
msgid "Java"
msgstr "Java"
#: buildtools/autotools/addtargetdlg.cpp:145
msgid "You have to give the target a name"
msgstr "Du må gi målet et navn"
#: buildtools/autotools/addtargetdlg.cpp:151
msgid "Libraries must have a lib prefix."
msgstr "Biblioteker må begynne med lib."
#: buildtools/autotools/addtargetdlg.cpp:156
msgid "Libtool libraries must have a lib prefix."
msgstr "Libtool-biblioteksnavn må begynne med lib."
#: buildtools/autotools/addtargetdlg.cpp:161
msgid "Libtool libraries must have a .la suffix."
msgstr "Libtool-biblioteker må ha etternavn .la."
#: buildtools/autotools/addtargetdlg.cpp:179
msgid "A target with this name already exists."
msgstr "Et mål med dette navnet finnes fra før."
#: buildtools/autotools/removefiledlg.cpp:65
msgid ""
"The file %1 is still used by the following targets:\n"
"%2\n"
"Remove it from all of them?"
msgstr ""
#: buildtools/autotools/removefiledlg.cpp:70
msgid "Do you really want to remove <b>%1</b>?"
msgstr ""
#: buildtools/autotools/addapplicationdlg.cpp:120
#: buildtools/autotools/addservicedlg.cpp:160
msgid "You have to enter a file name."
msgstr "Du må skrive inn et filnavn."
#: buildtools/autotools/addapplicationdlg.cpp:127
msgid "You have to enter the file name of an executable program."
msgstr "Du må oppgi filnavnet på et kjørbart program."
#: buildtools/autotools/addapplicationdlg.cpp:134
msgid "You have to enter an application name."
msgstr "Du må oppgi et programnavn."
#: buildtools/autotools/addapplicationdlg.cpp:141
#: buildtools/autotools/addservicedlg.cpp:174
msgid "A file with this name exists already."
msgstr "Det finnes en fil med dette navnet fra før."
#: buildtools/autotools/addapplicationdlg.cpp:146
#: buildtools/autotools/addservicedlg.cpp:179
msgid "Could not open file for writing."
msgstr "Klarte ikke åpne fil for skriving."
#: buildtools/autotools/addprefixdlg.cpp:27
msgid "Add Prefix"
msgstr ""
#: buildtools/autotools/addprefixdlg.cpp:35
msgid "&Path:"
msgstr "&Sti:"
#: buildtools/autotools/addfiledlg.cpp:80
msgid "This file is already in the target."
msgstr "Denne fila finnes allerede i målet."
#: buildtools/autotools/addfiledlg.cpp:91
#: buildtools/autotools/addfiledlg.cpp:103
msgid ""
"<b>A file with this name already exists.</b>"
"<br>"
"<br>Please use the \"Add existing file\" dialog."
msgstr ""
"<b>Det finnes fra før en fil med denne navnet.</b> "
"<br>"
"<br>Bruk dialogen «Legg til eksisterende fil»."
#: buildtools/autotools/addsubprojectdlg.cpp:58
msgid "You have to give the subproject a name."
msgstr ""
#: buildtools/autotools/addsubprojectdlg.cpp:65
msgid "A subproject with this name already exists."
msgstr ""
#: buildtools/autotools/addsubprojectdlg.cpp:75
msgid ""
"There is no config.status in the project root directory. Run 'Configure' first"
msgstr ""
#: buildtools/autotools/addsubprojectdlg.cpp:85
msgid "A file named %1 already exists."
msgstr "En fil med navnet %1 finnes fra før."
#: buildtools/autotools/addsubprojectdlg.cpp:90
msgid ""
"A subdirectory %1 already exists. Do you wish to add it as a subproject?"
msgstr ""
#: buildtools/autotools/addsubprojectdlg.cpp:97
#, c-format
msgid "Could not create subdirectory %1."
msgstr ""
#: buildtools/autotools/addsubprojectdlg.cpp:103
#, c-format
msgid "Could not access the subdirectory %1."
msgstr ""
#: buildtools/autotools/addsubprojectdlg.cpp:151
#, c-format
msgid "Could not create Makefile.am in subdirectory %1."
msgstr ""
#: buildtools/autotools/autoprojectwidget.cpp:71
msgid "Data"
msgstr "Data"
#: buildtools/autotools/autoprojectwidget.cpp:633
msgid "Documentation data"
msgstr "Dokumentasjonsdata"
#: buildtools/autotools/autoprojectwidget.cpp:635
#, fuzzy
msgid "KDE Icon data"
msgstr "Ikondata i %1"
#: buildtools/autotools/autoprojectwidget.cpp:637
msgid "%1 (%2 in %3)"
msgstr "%1 (%2 i %3)"
#: buildtools/autotools/addservicedlg.cpp:139
msgid "Enter Value"
msgstr "Oppgi verdi"
#: buildtools/autotools/addservicedlg.cpp:139
msgid "Property %1:"
msgstr "Egenskap %1:"
#: buildtools/autotools/addservicedlg.cpp:167
msgid "You have to enter a service name."
msgstr "Du må oppgi et tjenestenavn."
#: buildtools/autotools/removetargetdlg.cpp:48
msgid ""
"Do you really want to remove <b>%1</b>"
"<br>with <b>all files</b> that are attached to it"
"<br>and <b>all dependencies</b>?"
msgstr ""
#: buildtools/autotools/removetargetdlg.cpp:111
msgid ""
"_: no dependency\n"
"<none>"
msgstr ""
#: buildtools/autotools/removetargetdlg.cpp:117
#, c-format
msgid "Removing Target... %p%"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:84
msgid ""
"<b>Automake manager</b>"
"<p>The project tree consists of two parts. The 'overview' in the upper half "
"shows the subprojects, each one having a Makefile.am. The 'details' view in the "
"lower half shows the targets and files for the subproject selected in the "
"overview."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:90
msgid "Automake manager"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:93
msgid "Add Translation..."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:96
msgid "Add translation"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:97
msgid "<b>Add translation</b><p>Creates .po file for the selected language."
msgstr ""
#: buildtools/ada/adaproject_part.cpp:56 buildtools/ant/antprojectpart.cpp:55
#: buildtools/autotools/autoprojectpart.cpp:104
#: buildtools/custommakefiles/customprojectpart.cpp:83
#: buildtools/pascal/pascalproject_part.cpp:62
#: buildtools/qmake/trollprojectpart.cpp:103
msgid "&Build Project"
msgstr "&Bygg prosjektet"
#: buildtools/ant/antprojectpart.cpp:58
#: buildtools/autotools/autoprojectpart.cpp:107
#: buildtools/custommakefiles/customprojectpart.cpp:86
#: buildtools/pascal/pascalproject_part.cpp:65
#: buildtools/qmake/trollprojectpart.cpp:106
#: buildtools/qmake/trollprojectwidget.cpp:124
msgid "Build project"
msgstr "Bygg prosjektet"
#: buildtools/autotools/autoprojectpart.cpp:108
#: buildtools/qmake/trollprojectpart.cpp:107
#: buildtools/qmake/trollprojectwidget.cpp:125
msgid ""
"<b>Build project</b>"
"<p>Runs <b>make</b> from the project directory."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Bygg prosjekt</b> "
"<p> Kjører <b>make</b> i prosjektmappa. "
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/autotools/autoprojectpart.cpp:113
msgid "Build &Active Target"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:116
msgid "Build active target"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:117
msgid ""
"<b>Build active target</b>"
"<p>Constructs a series of make commands to build an active target. Also builds "
"dependent targets."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:123
#: buildtools/custommakefiles/customprojectpart.cpp:99
#: buildtools/qmake/trollprojectpart.cpp:94
msgid "Compile &File"
msgstr "Kompiler &fil"
#: buildtools/autotools/autoprojectpart.cpp:126
#: buildtools/custommakefiles/customprojectpart.cpp:102
#: buildtools/qmake/trollprojectpart.cpp:97
#: buildtools/qmake/trollprojectwidget.cpp:230
msgid "Compile file"
msgstr "Kompiler fil"
#: buildtools/autotools/autoprojectpart.cpp:127
#: buildtools/qmake/trollprojectpart.cpp:98
#: buildtools/qmake/trollprojectwidget.cpp:231
msgid ""
"<b>Compile file</b>"
"<p>Runs <b>make filename.o</b> command from the directory where 'filename' is "
"the name of currently opened file."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Kompiler fil</b> "
"<p>Kjører kommandoen <b>make filnavn.o</b> i mappa der filnavn er navnet på den "
"fila som nå er åpen. "
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/autotools/autoprojectpart.cpp:132
msgid "Run Configure"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:135
#: buildtools/autotools/autoprojectpart.cpp:665
msgid "Run configure"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:136
msgid ""
"<b>Run configure</b>"
"<p>Executes <b>configure</b> with flags, arguments and environment variables "
"specified in the project settings dialog, <b>Configure Options</b> tab."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:141
#: buildtools/autotools/autoprojectpart.cpp:144
msgid "Run automake && friends"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:145
msgid ""
"<b>Run automake && friends</b>"
"<p>Executes"
"<br><b>make -f Makefile.cvs</b>"
"<br><b>./configure</b>"
"<br>commands from the project directory."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:148
#: buildtools/autotools/autoprojectpart.cpp:151
#, fuzzy
msgid "Update admin module"
msgstr "Oppdater register"
#: buildtools/autotools/autoprojectpart.cpp:152
msgid ""
"<b>Update admin module</b>"
"<p>Recreates the project admin directory using the version present on the local "
"system."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:159
#: buildtools/custommakefiles/customprojectpart.cpp:111
msgid ""
"<b>Install</b>"
"<p>Runs <b>make install</b> command from the project directory."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:167
#: buildtools/custommakefiles/customprojectpart.cpp:126
msgid "Install as root user"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:168
#: buildtools/custommakefiles/customprojectpart.cpp:127
msgid ""
"<b>Install</b>"
"<p>Runs <b>make install</b> command from the project directory with root "
"privileges."
"<br>It is executed via tdesu command."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:174
#: buildtools/custommakefiles/customprojectpart.cpp:132
#: buildtools/qmake/trollprojectpart.cpp:127
msgid "&Clean Project"
msgstr "&Rydd prosjektet"
#: buildtools/autotools/autoprojectpart.cpp:177
#: buildtools/custommakefiles/customprojectpart.cpp:135
#: buildtools/qmake/trollprojectpart.cpp:130
msgid "Clean project"
msgstr "Rydd prosjektet"
#: buildtools/autotools/autoprojectpart.cpp:178
#: buildtools/qmake/trollprojectpart.cpp:131
msgid ""
"<b>Clean project</b>"
"<p>Runs <b>make clean</b> command from the project directory."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Rydd prosjektet</b> <p<Kjører kommandoen <b>make clean</b> "
"fra prosjektmappa. "
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/autotools/autoprojectpart.cpp:183
msgid "&Distclean"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:186
msgid "Distclean"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:187
msgid ""
"<b>Distclean</b>"
"<p>Runs <b>make distclean</b> command from the project directory."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:192
msgid "Make Messages && Merge"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:195
msgid "Make messages && merge"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:196
msgid ""
"<b>Make messages && merge</b>"
"<p>Runs <b>make package-messages</b> command from the project directory."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:204
msgid "Build Configuration"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:206
msgid "Build configuration menu"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:207
msgid ""
"<b>Build configuration menu</b>"
"<p>Allows to switch between project build configurations."
"<br>Build configuration is a set of build and top source directory settings, "
"configure flags and arguments, compiler flags, etc."
"<br>Modify build configurations in project settings dialog, <b>"
"Configure Options</b> tab."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:219
#: buildtools/custommakefiles/customprojectpart.cpp:143
#: buildtools/pascal/pascalproject_part.cpp:71
#: languages/python/pythonsupportpart.cpp:66
msgid "Execute program"
msgstr "Kjør program"
#: buildtools/autotools/autoprojectpart.cpp:220
#, fuzzy
msgid ""
"<b>Execute program</b>"
"<p>Executes the currently active target or the main program specified in "
"project settings, <b>Run Options</b> tab."
msgstr ""
"<b>Kjør program</b> "
"<p>Kjører hovedprogrammet som er oppgitt i prosjektinnstillingene, <b>"
"Parametre for kjøring</b>."
#: buildtools/autotools/autoprojectpart.cpp:307
msgid ""
"No active target specified, running the application will\n"
"not work until you make a target active in the Automake Manager\n"
"on the right side or use the Main Program options under\n"
"Project -> Project Options -> Run Options"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:310
msgid "No active target specified"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:415
msgid ""
"There is no active target.\n"
"Unable to determine the main program."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:416
#: buildtools/autotools/autoprojectpart.cpp:1244
#, fuzzy
msgid "No active target found"
msgstr "Fant ingen CTags-database"
#: buildtools/autotools/autoprojectpart.cpp:422
msgid ""
"Active target \"%1\" is not binary ( %2 ).\n"
"Unable to determine the main program. If you want this\n"
"to be the active target, set a main program under\n"
"Project -> Project Options -> Run Options"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:425
#: buildtools/autotools/autoprojectpart.cpp:1251
msgid "Active target is not a library"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:553
msgid ""
"The directory you selected is not the active directory.\n"
"You should 'activate' the target you're currently working on in Automake "
"Manager.\n"
"Just right-click a target and choose 'Make Target Active'."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:556
msgid "No Active Target Found"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:652
msgid ""
"%1\n"
"There is no Makefile in this directory\n"
"and no configure script for this project.\n"
"Run automake & friends and configure first?"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:654
msgid "Run Them"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:665
#, fuzzy
msgid ""
"%1\n"
"There is no Makefile in this directory. Run 'configure' first?"
msgstr ""
"config.status finnes ikke i prosjektets rot-byggemappe. Kjør «Oppsett» først"
#: buildtools/autotools/autoprojectpart.cpp:803
msgid ""
"Found a circular dependency in the project, between this target and %1.\n"
"Cannot build this project until this is resolved."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:803
msgid "Circular Dependency found"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:903
msgid "Can only compile files in directories which belong to the project."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:1018
msgid ""
"There is neither a Makefile.cvs file nor an autogen.sh script in the project "
"directory."
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:1198
#: buildtools/qmake/trollprojectwidget.cpp:678
#: buildtools/qmake/trollprojectwidget.cpp:2060
msgid "Your application is currently running. Do you want to restart it?"
msgstr "Programmet kjører nå. Vil du starte den på nytt?"
#: buildtools/autotools/autoprojectpart.cpp:1198
#: buildtools/qmake/trollprojectwidget.cpp:678
#: buildtools/qmake/trollprojectwidget.cpp:2060
msgid "Application Already Running"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:1198
#: buildtools/qmake/trollprojectwidget.cpp:678
#: buildtools/qmake/trollprojectwidget.cpp:2060
msgid "&Restart Application"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:1198
#: buildtools/qmake/trollprojectwidget.cpp:678
#: buildtools/qmake/trollprojectwidget.cpp:2060
msgid "Do &Nothing"
msgstr "Ikke gjør &noe"
#: buildtools/autotools/autoprojectpart.cpp:1243
msgid ""
"There is no active target.\n"
"Unable to determine the main program"
msgstr ""
#: buildtools/autotools/autoprojectpart.cpp:1248
msgid ""
"Active target \"%1\" is not binary ( %2 ).\n"
"Unable to determine the main program. If you want this\n"
"to be the active target, set a main program under\n"
"Project -> Project Options -> Run Options"
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:182
msgid ""
"<b>Options</b>"
"<p>Target options dialog that provides settings for linker flags and lists of "
"dependencies and external libraries that are used when compiling the target."
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:189
#: buildtools/autotools/autodetailsview.cpp:190
#: buildtools/qmake/trollprojectwidget.cpp:1563
#: buildtools/qmake/trollprojectwidget.cpp:1578
msgid "Create New File..."
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:193
msgid ""
"<b>Create new file</b>"
"<p>Creates a new file and adds it to a currently selected target."
msgstr ""
"<b>Opprett ny fil</b> "
"<p>Oppretter en ny fil og legger den til det valgte målet."
#: buildtools/autotools/autodetailsview.cpp:198
#: buildtools/autotools/autodetailsview.cpp:199
#: buildtools/qmake/trollprojectwidget.cpp:1565
#: buildtools/qmake/trollprojectwidget.cpp:1580
msgid "Add Existing Files..."
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:202
msgid ""
"<b>Add existing files</b>"
"<p>Adds existing file to a currently selected target. Header files will not be "
"included in SOURCES list of a target. They will be added to noinst_HEADERS "
"instead."
msgstr ""
"<b>Legg til eksisterende filer</b> "
"<p>Legger til en eksisterende til det valgte målet. Hodefiler blir ikke "
"medregnet i et måls SOURCES-liste, de blir i stedet lagt til noinst_HEADERS."
#: buildtools/autotools/autodetailsview.cpp:210
msgid "Add Icon..."
msgstr "Legg til ikon …"
#: buildtools/autotools/autodetailsview.cpp:212
#, fuzzy
msgid "<b>Add icon</b><p>Adds an icon to a KDEICON target."
msgstr "<b>Legg til ikon</b><p>Legger til et ikon til et TDEICON-mål."
#: buildtools/autotools/autodetailsview.cpp:214
#, fuzzy
msgid "Build Target"
msgstr "Bygg &målet"
#: buildtools/autotools/autodetailsview.cpp:215
msgid "Build Target..."
msgstr "Bygg målet …"
#: buildtools/autotools/autodetailsview.cpp:218
msgid ""
"<b>Build target</b>"
"<p>Constructs a series of make commands to build the selected target. Also "
"builds dependent targets."
msgstr ""
"<b>Bygg målet</b> "
"<p>Lager en rekke make-kommandoer for å bygge det valgte målet. Bygger også "
"avhengige mål."
#: buildtools/autotools/autodetailsview.cpp:224
#: buildtools/autotools/autodetailsview.cpp:225
msgid "Execute Target..."
msgstr "Kjør målet …"
#: buildtools/autotools/autodetailsview.cpp:228
msgid ""
"<b>Execute target</b>"
"<p>Executes the target and tries to build in case it is not built."
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:233
msgid "Make Target Active"
msgstr "Gjør målet aktivt"
#: buildtools/autotools/autodetailsview.cpp:236
msgid ""
"<b>Make target active</b>"
"<p>Marks the currently selected target as 'active'. New files and classes by "
"default go to an active target. Using the <b>Build Active Target</b> "
"menu command builds it."
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:247
msgid ""
"<b>Remove</b>"
"<p>Shows a list of targets dependent on the selected target or file and asks "
"for removal. Also asks if the target or file should be removed from disk."
msgstr ""
"<b>Fjern</b> "
"<p> Viser en liste over mål som avhenger av det valgte målet eller fila og spør "
"om det skal fjernes. Spør også om det valgte målet/fila skal slettes fra disk."
#: buildtools/autotools/autodetailsview.cpp:319
msgid "Add New File to '%1'"
msgstr "Legg ny fil til «%1»"
#: buildtools/autotools/autodetailsview.cpp:341
msgid "Add Existing Files to '%1'"
msgstr "Legg eksisterende filer til «%1»"
#: buildtools/autotools/autodetailsview.cpp:423
msgid "Remove File From '%1'"
msgstr "Fjern fil fra «%1»"
#: buildtools/autotools/autodetailsview.cpp:450
msgid "Remove Target From '%1'"
msgstr "Fjern mål fra «%1»"
#: buildtools/autotools/autodetailsview.cpp:502
#, c-format
msgid "Target: %1"
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:557
#: buildtools/qmake/trollprojectwidget.cpp:1760
#, c-format
msgid "File: %1"
msgstr "Fil: %1"
#: buildtools/autotools/autodetailsview.cpp:565
#: buildtools/qmake/trollprojectwidget.cpp:1781
msgid "Subclassing Wizard..."
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:566
#: buildtools/qmake/trollprojectwidget.cpp:1782
msgid ""
"<b>Subclass widget</b>"
"<p>Launches <b>Subclassing</b> wizard. It allows to create a subclass from the "
"class defined in .ui file. There is also possibility to implement slots and "
"functions defined in the base class."
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:574
#: buildtools/qmake/trollprojectwidget.cpp:1790
msgid "List of Subclasses..."
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:575
#: buildtools/qmake/trollprojectwidget.cpp:1791
msgid ""
"<b>List of subclasses</b>"
"<p>Shows subclasses list editor. There is possibility to add or remove "
"subclasses from the list."
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:580
#: buildtools/qmake/trollprojectwidget.cpp:1775
msgid "Edit ui-Subclass..."
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:581
#: buildtools/qmake/trollprojectwidget.cpp:1776
msgid ""
"<b>Edit ui-subclass</b>"
"<p>Launches <b>Subclassing</b> wizard and prompts to implement missing in "
"childclass slots and functions."
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:586
#: buildtools/qmake/trollprojectwidget.cpp:1787
msgid "Open ui.h File"
msgstr ""
#: buildtools/autotools/autodetailsview.cpp:587
#: buildtools/qmake/trollprojectwidget.cpp:1788
msgid ""
"<b>Open ui.h file</b>"
"<p>Opens .ui.h file associated with the selected .ui."
msgstr ""
#: buildtools/autotools/addicondlg.cpp:46
msgid "Action"
msgstr "Handling"
#: buildtools/autotools/addicondlg.cpp:47
msgid "Device"
msgstr "Enhet"
#: buildtools/autotools/addicondlg.cpp:48
msgid "File System"
msgstr "Filsystem"
#: buildtools/autotools/addicondlg.cpp:49
msgid "MIME Type"
msgstr "MIME-type"
#: buildtools/ant/antprojectpart.cpp:59
msgid ""
"<b>Build project</b>"
"<p>Executes <b>ant dist</b> command to build the project."
msgstr ""
"<b>Bygg prosjektet</b> "
"<p>Kjører kommandoen <b>ant dist</b> for å bygge prosjektet."
#: buildtools/ant/antprojectpart.cpp:61
#: buildtools/custommakefiles/customprojectpart.cpp:147
msgid "Build &Target"
msgstr "Bygg &målet"
#: buildtools/ant/antprojectpart.cpp:63
#: buildtools/custommakefiles/customprojectpart.cpp:150
msgid "Build target"
msgstr "Bygg målet"
#: buildtools/ant/antprojectpart.cpp:64
msgid ""
"<b>Build target</b>"
"<p>Executes <b>ant target_name</b> command to build the specified target."
msgstr ""
"<b>Bygg målet</b> "
"<p>Kjører kommandoen <b>ant mål_navn</b> for å bygge det oppgitte målet."
#: buildtools/ant/antprojectpart.cpp:467
msgid "Ant Options"
msgstr "Ant-valg"
#: buildtools/ant/antprojectpart.cpp:502
msgid "Classpath"
msgstr "Classpath"
#: buildtools/ant/antprojectpart.cpp:565
msgid "Remove %1 From Project"
msgstr "Fjern %1 fra prosjektet"
#: buildtools/ant/antprojectpart.cpp:567
msgid "<b>Remove from project</b><p>Removes current file from the project."
msgstr "<b>Fjern fra prosjektet</b><p>Fjern gjeldende fil fra prosjektet."
#: buildtools/ant/antprojectpart.cpp:571
msgid "Add %1 to Project"
msgstr "Legg %1 til prosjektet"
#: buildtools/ant/antprojectpart.cpp:573
msgid "<b>Add to project</b><p>Adds current file from the project."
msgstr "<b>Legg til prosjektet</b><p>Legger til gjeldende fil i prosjektet."
#: buildtools/qmake/projectconfigurationdlg.cpp:140
#, fuzzy
msgid "Save the current subproject's configuration?"
msgstr "Oppsett av underprosjekt i QMake"
#: buildtools/qmake/projectconfigurationdlg.cpp:141
#, fuzzy
msgid "Save Configuration?"
msgstr "CVS tjeneroppsett"
#: buildtools/qmake/projectconfigurationdlg.cpp:1380
msgid "Add include directory:"
msgstr "Legg til mappe med «include»-filer:"
#: buildtools/qmake/projectconfigurationdlg.cpp:1463
msgid "Add Library: Either choose the .a/.so file or give -l<libname>"
msgstr ""
#: buildtools/qmake/projectconfigurationdlg.cpp:1547
msgid "Add library directory:"
msgstr "Legg til bilblioteksmappe:"
#: buildtools/qmake/projectconfigurationdlg.cpp:1575
msgid "Change include directory:"
msgstr "Endre mappe for «include»-filer:"
#: buildtools/qmake/projectconfigurationdlg.cpp:1604
#, fuzzy
msgid "Change Library:"
msgstr "Endre bibliotek"
#: buildtools/qmake/projectconfigurationdlg.cpp:1660
msgid "Change library directory:"
msgstr "Endre biblioteksmappe:"
#: buildtools/qmake/projectconfigurationdlg.cpp:1687
msgid "Add target:"
msgstr "Legg til mål:"
#: buildtools/qmake/projectconfigurationdlg.cpp:1708
msgid "Change target:"
msgstr "Endre mål:"
#: buildtools/qmake/createscopedlg.cpp:33
msgid "Choose existing .pri file or give a new filename for creation"
msgstr ""
#: buildtools/qmake/createscopedlg.cpp:91
msgid ""
"You did not specify all needed information. The scope will not be created."
"<br>Do you want to abort the scope creation?"
msgstr ""
#: buildtools/qmake/createscopedlg.cpp:93
#, fuzzy
msgid "Missing information"
msgstr "Definisjonsinformasjon"
#: buildtools/qmake/trollprojectwidget.cpp:107
msgid "Add subproject"
msgstr "Legg til underprosjekt"
#: buildtools/qmake/trollprojectwidget.cpp:108
#: buildtools/qmake/trollprojectwidget.cpp:1026
msgid ""
"<b>Add subproject</b>"
"<p>Creates a <i>new</i> or adds an <i>existing</i> subproject to a currently "
"selected subproject. This action is allowed only if a type of the subproject is "
"'subdirectories'. The type of the subproject can be defined in <b>"
"Subproject Settings</b> dialog (open it from the subproject context menu)."
msgstr ""
"<b>Legg til underprosjekt</b> "
"<p> Oppretter ett <i>nytt</i> eller legger til et <i>eksisterende</i> "
"underprosjekt til et gjeldende, valgt underprosjekt. Dette er bare tillatt "
"dersom en type i underprosjektet er «undermapper». Underprosjektets type kan "
"angis i dialogen <b>Innstillinger for underprosjekt</b> "
"(åpnes fra kontekstmenyen til underprosjektet),"
#: buildtools/qmake/trollprojectwidget.cpp:116
msgid "Create scope"
msgstr "Opprett virkefelt"
#: buildtools/qmake/trollprojectwidget.cpp:117
#, fuzzy
msgid ""
"<b>Create scope</b>"
"<p>Creates TQMake scope in the project file in case the subproject is selected "
"or creates nested scope in case the scope is selected."
msgstr ""
"<b>Opprett virkefelt</b> "
"<p>Oppretter virkefelt for QMake i prosjektfila hvis underprosjektet er valgt, "
"eller oppretter nøstet virkefelt hvis virkefeltet er valgt."
#: buildtools/qmake/trollprojectpart.cpp:114
#: buildtools/qmake/trollprojectwidget.cpp:133
msgid "Rebuild project"
msgstr "Bygg prosjektet på nytt"
#: buildtools/qmake/trollprojectpart.cpp:115
#: buildtools/qmake/trollprojectwidget.cpp:134
#: buildtools/qmake/trollprojectwidget.cpp:1014
msgid ""
"<b>Rebuild project</b>"
"<p>Runs <b>make clean</b> and then <b>make</b> from the project directory."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Bygg prosjektet på nytt</b> "
"<p>Kjører <b>make clean</b> og deretter <b>make</b> i prosjektmappa. "
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/qmake/trollprojectpart.cpp:146
#: buildtools/qmake/trollprojectwidget.cpp:143
msgid "Execute main program"
msgstr "Kjør hovedprogram"
#: buildtools/qmake/trollprojectwidget.cpp:144
msgid ""
"<b>Execute main program</b>"
"<p>Executes the main program specified in project settings, <b>Run Options</b> "
"tab."
msgstr ""
"<b>Kjør hovedprogram</b> "
"<p>Kjører hovedprogrammet som er oppgitt i prosjektinnstillingene, fanen <b>"
"Parametre for kjøring</b>."
#: buildtools/qmake/trollprojectwidget.cpp:153
msgid "Subproject settings"
msgstr "Innstillinger for underprosjekt"
#: buildtools/qmake/trollprojectwidget.cpp:154
#, fuzzy
msgid ""
"<b>Subproject settings</b>"
"<p>Opens <b>TQMake Subproject Configuration</b> dialog for the currently "
"selected subproject. It provides settings for:"
"<br>subproject type and configuration,"
"<br>include and library paths,"
"<br>lists of dependencies and external libraries,"
"<br>build order,"
"<br>intermediate files locations,"
"<br>compiler options."
msgstr ""
"<b>Innstillinger for underprosjekt</b> "
"<p>Åpner dialogen <b>QMake underprosjektinnstillinger</b> "
"for det underprosjektet som nå er valgt. Her kan det stilles inn data for: "
"<br>underprosjekt-type og oppsett, "
"<br>stier til include-filer og biblioteker, "
"<br>lister over avhengigheter og eksterne biblioteker, "
"<br>byggerekkefølge, "
"<br>plassering av mellomfiler, "
"<br>kompilatorinnstillinger."
#: buildtools/qmake/trollprojectwidget.cpp:204
msgid "Create new file"
msgstr "Opprett ny fil"
#: buildtools/qmake/trollprojectwidget.cpp:205
#: buildtools/qmake/trollprojectwidget.cpp:1579
msgid ""
"<b>Create new file</b>"
"<p>Creates a new file and adds it to a currently selected group."
msgstr ""
"<b>Opprett ny fil</b> "
"<p>Lager en ny fil og legger den til en markert gruppe."
#: buildtools/qmake/trollprojectwidget.cpp:212
msgid "Add existing files"
msgstr "Legg til eksisterende filer"
#: buildtools/qmake/trollprojectwidget.cpp:213
#: buildtools/qmake/trollprojectwidget.cpp:1581
msgid ""
"<b>Add existing files</b>"
"<p>Adds existing files to a currently selected group. It is possible to copy "
"files to a current subproject directory, create symbolic links or add them with "
"the relative path."
msgstr ""
"<b>Legg til eksisterende filer</b> "
"<p>Legger til eksisterende filer til en gruppe som nå er valgt. Filer kan "
"kopieres til mappa for gjeldende underprosjekt, lenkes med symbolske lenger, "
"eller legges til med relativ sti."
#: buildtools/qmake/trollprojectwidget.cpp:222
msgid "Remove file"
msgstr "Fjern fil"
#: buildtools/qmake/trollprojectwidget.cpp:223
msgid ""
"<b>Remove file</b>"
"<p>Removes file from a current group. Does not remove file from disk."
msgstr ""
"<b>Fjern fil</b>"
"<p>Fjerner fila fra en gjeldende gruppe. Fjerner ikke fila fra disk."
#: buildtools/qmake/trollprojectpart.cpp:152
#: buildtools/qmake/trollprojectwidget.cpp:240
msgid "Build subproject"
msgstr "Bygg underprosjekt"
#: buildtools/qmake/trollprojectpart.cpp:153
#: buildtools/qmake/trollprojectwidget.cpp:241
#, fuzzy
msgid ""
"<b>Build subproject</b>"
"<p>Runs <b>make</b> from the current subproject directory. Current subproject "
"is a subproject selected in <b>TQMake manager</b> 'overview' window."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b >Bygg underprosjekt</b> "
"<p>Kjører <b>make</b> fra mappa for gjeldende underprosjekt. Gjeldende "
"underprosjekt er et underprosjekt markert i oversiktsvinduet <b>"
"QMake-styring</b>."
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/qmake/trollprojectpart.cpp:161
#: buildtools/qmake/trollprojectwidget.cpp:250
msgid "Rebuild subproject"
msgstr "Bygg underprosjekt på nytt"
#: buildtools/qmake/trollprojectpart.cpp:162
#: buildtools/qmake/trollprojectwidget.cpp:251
#, fuzzy
msgid ""
"<b>Rebuild subproject</b>"
"<p>Runs <b>make clean</b> and then <b>make</b> from the current subproject "
"directory. Current subproject is a subproject selected in <b>TQMake manager</b> "
"'overview' window."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Bygg underprosjekt på nytt</b> "
"<p>Kjører <b>make clean</b> og deretter <b>make</b> fra mappa for gjeldende "
"underprosjekt. Gjeldende underprosjekt er et underprosjekt markert i "
"oversiktsvinduet <b>QMake-styring</b>."
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/qmake/trollprojectpart.cpp:197
#: buildtools/qmake/trollprojectwidget.cpp:261
msgid "Execute subproject"
msgstr "Kjør underprosjekt"
#: buildtools/qmake/trollprojectpart.cpp:198
#: buildtools/qmake/trollprojectwidget.cpp:262
msgid ""
"<b>Execute subproject</b>"
"<p>Executes the target program for the currently selected subproject. This "
"action is allowed only if a type of the subproject is 'application'. The type "
"of the subproject can be defined in <b>Subproject Settings</b> "
"dialog (open it from the subproject context menu)."
msgstr ""
"<b>Kjør underprosjekt</b> "
"<p>Kjører målprogrammet for gjeldende underprosjekt. Dette kan bare gjøres "
"dersom «program» er en type for underprosjektet. Underprosjektets type kan "
"angis i dialogen <b>Innstillinger for underprosjekt</b> "
"(åpnes fra kontekstmenyen til underprosjektet),"
#: buildtools/qmake/trollprojectwidget.cpp:276
#, fuzzy
msgid "Exclude file"
msgstr "&Ekskluder i:"
#: buildtools/qmake/trollprojectwidget.cpp:277
msgid "<b>Exclude file</b><p>Exclude the selected file from this scope."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:850
#, fuzzy
msgid "Add Subproject"
msgstr "Legg til underprosjekt"
#: buildtools/qmake/trollprojectwidget.cpp:850
#, fuzzy
msgid "Please enter a name for the subproject: "
msgstr "Oppgi navn for undermappa:"
#: buildtools/qmake/trollprojectwidget.cpp:877
msgid ""
"Failed to create subdirectory. Do you have write permission in the project "
"folder?"
msgstr "Klarte ikke å lage undermappe. Har du skrivetilgang i prosjektmappa?"
#: buildtools/qmake/trollprojectwidget.cpp:933
msgid ""
"Could not create subproject. This means that either the project you wanted to "
"add a subproject to is not parsed correctly, or it is not a subdirs-project."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:935
#, fuzzy
msgid "Subproject creation failed"
msgstr "Informasjon om underprosjekter"
#: buildtools/qmake/trollprojectwidget.cpp:952
#, fuzzy
msgid "Delete the file/directory of the subproject from disk?"
msgstr "Oppgi hvilken mappe du vil ha prosjektene i."
#: buildtools/qmake/trollprojectwidget.cpp:952
#, fuzzy
msgid "Delete subdir?"
msgstr "Slett signal"
#: buildtools/qmake/trollprojectwidget.cpp:956
msgid ""
"Could not delete subproject.\n"
"This is an internal error, please write a bug report to bugs.trinitydesktop.org and "
"include the output of tdevelop when runfrom a shell."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:958
#, fuzzy
msgid "Subproject Deletion failed"
msgstr "Underprosjektvalg"
#: buildtools/qmake/trollprojectwidget.cpp:977
#, c-format
msgid "Subproject %1"
msgstr "Underprosjekt %1"
#: buildtools/qmake/trollprojectwidget.cpp:997
msgid ""
"<b>Build</b>"
"<p>Runs <b>make</b> from the selected subproject directory."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Bygg</b> "
"<p>Kjører <b>make</b> i mappa for det valgte underprosjektet. "
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/qmake/trollprojectwidget.cpp:1001
#, fuzzy
msgid ""
"<b>Install</b>"
"<p>Runs <b>make install</b> from the selected subproject directory."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Bygg</b> "
"<p>Kjører <b>make</b> i mappa for det valgte underprosjektet. "
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/qmake/trollprojectwidget.cpp:1005
#, fuzzy
msgid ""
"<b>Clean project</b>"
"<p>Runs <b>make clean</b> command from the project directory."
"<br> Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Rydd prosjektet</b> <p<Kjører kommandoen <b>make clean</b> "
"fra prosjektmappa. "
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/qmake/trollprojectwidget.cpp:1008
#, fuzzy
msgid "Dist-Clean"
msgstr "Ren"
#: buildtools/qmake/trollprojectwidget.cpp:1009
#, fuzzy
msgid ""
"<b>Dist-Clean project</b>"
"<p>Runs <b>make distclean</b> command from the project directory."
"<br> Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Rydd prosjektet</b> <p<Kjører kommandoen <b>make clean</b> "
"fra prosjektmappa. "
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/qmake/trollprojectwidget.cpp:1013
#, fuzzy
msgid "Rebuild"
msgstr "Bygg"
#: buildtools/qmake/trollprojectwidget.cpp:1017
#: buildtools/qmake/trollprojectwidget.cpp:2186
msgid "Run qmake"
msgstr "Kjør qmake"
#: buildtools/qmake/trollprojectwidget.cpp:1018
msgid ""
"<b>Run qmake</b>"
"<p>Runs <b>qmake</b> from the selected subproject directory. This creates or "
"regenerates Makefile."
msgstr ""
"<b>Kjør qmake</b> "
"<p>Kjører <b>qmake</b> i mappa til det valgte underprosjektet. Dette oppretter "
"eller gjenskaper Makefile."
#: buildtools/qmake/trollprojectwidget.cpp:1019
#, fuzzy
msgid "Run qmake recursively"
msgstr "&Vær rekursiv"
#: buildtools/qmake/trollprojectwidget.cpp:1020
#, fuzzy
msgid ""
"<b>Run qmake recursively</b>"
"<p>Runs <b>qmake</b> from the selected subproject directory and recurses into "
"all subproject directories. This creates or regenerates Makefile."
msgstr ""
"<b>Kjør qmake</b> "
"<p>Kjører <b>qmake</b> i mappa til det valgte underprosjektet. Dette oppretter "
"eller gjenskaper Makefile."
#: buildtools/qmake/trollprojectwidget.cpp:1025
#: buildtools/qmake/trollprojectwidget.cpp:1050
msgid "Add Subproject..."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1032
msgid ""
"<b>Remove subproject</b>"
"<p>Removes currently selected subproject. Does not delete any file from disk. "
"Deleted subproject can be later added by calling 'Add Subproject' action."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1035
#: buildtools/qmake/trollprojectwidget.cpp:1045
msgid "Create Scope..."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1036
#, fuzzy
msgid ""
"<b>Create scope</b>"
"<p>Creates TQMake scope in the project file of the currently selected "
"subproject."
msgstr ""
"<b>Opprett virkefelt</b> "
"<p>Oppretter virkefelt for QMake i prosjektfila hvis underprosjektet er valgt, "
"eller oppretter nøstet virkefelt hvis virkefeltet er valgt."
#: buildtools/qmake/trollprojectwidget.cpp:1038
msgid "Subproject Settings"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1039
#, fuzzy
msgid ""
"<b>Subproject settings</b>"
"<p>Opens <b>TQMake Subproject Configuration</b> dialog. It provides settings "
"for:"
"<br>subproject type and configuration,"
"<br>include and library paths,"
"<br>lists of dependencies and external libraries,"
"<br>build order,"
"<br>intermediate files locations,"
"<br>compiler options."
msgstr ""
"<b>Innstillinger for underprosjekt</b> "
"<p>Åpner dialogen <b>QMake underprosjektinnstillinger</b> "
"for det underprosjektet som nå er valgt. Her kan det stilles inn data for: "
"<br>underprosjekt-type og oppsett, "
"<br>stier til include-filer og biblioteker, "
"<br>lister over avhengigheter og eksterne biblioteker, "
"<br>byggerekkefølge, "
"<br>plassering av mellomfiler, "
"<br>kompilatorinnstillinger."
#: buildtools/qmake/trollprojectwidget.cpp:1046
#, fuzzy
msgid ""
"<b>Create Scope</b>"
"<p>Creates TQMake scope in the currently selected scope."
msgstr ""
"<b>Opprett ny fil</b> "
"<p>Lager en ny fil og legger den til en markert gruppe."
#: buildtools/qmake/trollprojectwidget.cpp:1047
msgid "Remove Scope"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1048
msgid "<b>Remove Scope</b><p>Removes currently selected scope."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1051
#, fuzzy
msgid ""
"<b>Add subproject</b>"
"<p>Creates a <i>new</i> or adds an <i>existing</i> subproject to the currently "
"selected scope. This action is allowed only if the type of the subproject is "
"'subdirectories'. The type of the subproject can be defined in the <b>"
"Subproject Settings</b> dialog (open it from the subproject context menu)."
msgstr ""
"<b>Legg til underprosjekt</b> "
"<p> Oppretter ett <i>nytt</i> eller legger til et <i>eksisterende</i> "
"underprosjekt til et gjeldende, valgt underprosjekt. Dette er bare tillatt "
"dersom en type i underprosjektet er «undermapper». Underprosjektets type kan "
"angis i dialogen <b>Innstillinger for underprosjekt</b> "
"(åpnes fra kontekstmenyen til underprosjektet),"
#: buildtools/qmake/trollprojectwidget.cpp:1056
#, fuzzy
msgid "Disable Subproject..."
msgstr "Velg underprosjekt"
#: buildtools/qmake/trollprojectwidget.cpp:1057
msgid ""
"<b>Disable subproject</b>"
"<p>Disables the currently selected subproject when this scope is active. Does "
"not delete the directory from disk. The deleted subproject can be later added "
"by using the 'Add Subproject' action."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1062
#, fuzzy
msgid ""
"<b>Scope settings</b>"
"<p>Opens <b>TQMake Subproject Configuration</b> dialog. It provides settings "
"for:"
"<br>subproject type and configuration,"
"<br>include and library paths,"
"<br>lists of dependencies and external libraries,"
"<br>build order,"
"<br>intermediate files locations,"
"<br>compiler options."
msgstr ""
"<b>Innstillinger for underprosjekt</b> "
"<p>Åpner dialogen <b>QMake underprosjektinnstillinger</b> "
"for det underprosjektet som nå er valgt. Her kan det stilles inn data for: "
"<br>underprosjekt-type og oppsett, "
"<br>stier til include-filer og biblioteker, "
"<br>lister over avhengigheter og eksterne biblioteker, "
"<br>byggerekkefølge, "
"<br>plassering av mellomfiler, "
"<br>kompilatorinnstillinger."
#: buildtools/qmake/trollprojectwidget.cpp:1191
msgid ""
"You did not select a subproject to add the file to, or select a subproject that "
"has subdirs."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1191
#, fuzzy
msgid "File adding aborted"
msgstr "Fil endret"
#: buildtools/qmake/trollprojectwidget.cpp:1262
msgid "All Files"
msgstr "Alle filer"
#: buildtools/qmake/trollprojectwidget.cpp:1376
msgid "Insert New Filepattern"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1377
msgid ""
"Please enter a filepattern relative the current subproject (example "
"docs/*.html):"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1392
msgid "Insert New Install Object"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1393
msgid "Please enter a name for the new object:"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1546
msgid "Add Install Object..."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1547
msgid ""
"<b>Add install object</b>"
"<p>Creates TQMake install object. It is possible to define a list of files to "
"install and installation locations for each object. Warning! Install objects "
"without path specified will not be saved to a project file."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1553
msgid "Install Path..."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1554
msgid ""
"<b>Install path</b>"
"<p>Allows to choose the installation path for the current install object."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1555
msgid "Add Pattern of Files to Install..."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1556
msgid ""
"<b>Add pattern of files to install</b>"
"<p>Defines the pattern to match files which will be installed. It is possible "
"to use wildcards and relative paths like <i>docs/*</i>."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1558
#, fuzzy
msgid "Remove Install Object"
msgstr "Installer objekt"
#: buildtools/qmake/trollprojectwidget.cpp:1559
#, fuzzy
msgid ""
"<b>Remove install object</b>"
"<p>Removes the install object the current group."
msgstr "<b>Fjern alle stoppunkter</b><p>Fjerner alle stoppunkter i prosjektet."
#: buildtools/qmake/trollprojectwidget.cpp:1564
msgid ""
"<b>Create new file</b>"
"<p>Creates a new translation file and adds it to a currently selected "
"TRANSLATIONS group."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1566
msgid ""
"<b>Add existing files</b>"
"<p>Adds existing translation (*.ts) files to a currently selected TRANSLATIONS "
"group. It is possible to copy files to a current subproject directory, create "
"symbolic links or add them with the relative path."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1569
msgid "Update Translation Files"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1570
msgid ""
"<b>Update Translation Files</b>"
"<p>Runs <b>lupdate</b> command from the current subproject directory. It "
"collects translatable messages and saves them into translation files."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1572
msgid "Release Binary Translations"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1573
msgid ""
"<b>Release Binary Translations</b>"
"<p>Runs <b>lrelease</b> command from the current subproject directory. It "
"creates binary translation files that are ready to be loaded at program "
"execution."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1590
msgid "Choose Install Path"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1590
msgid "Enter a path (example /usr/local/share/... ):"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1604
msgid "Add Pattern of Files to Install"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1605
#: buildtools/qmake/trollprojectwidget.cpp:1906
msgid ""
"Enter a pattern relative to the current subproject (example docs/*.html):"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1725
msgid "Add Install Object"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1726
msgid "Enter a name for the new object:"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1762
#, c-format
msgid "Pattern: %1"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1797
#, fuzzy
msgid ""
"<b>Remove file</b>"
"<p>Removes file from a current group. For sources, this also removes the "
"subclassing information."
msgstr ""
"<b>Fjern fil</b>"
"<p>Fjerner fila fra en gjeldende gruppe. Fjerner ikke fila fra disk."
#: buildtools/qmake/trollprojectwidget.cpp:1798
#, fuzzy
msgid "Exclude File"
msgstr "&Ekskluder i:"
#: buildtools/qmake/trollprojectwidget.cpp:1799
msgid ""
"<b>Exclude File</b>"
"<p>Excludes the file from this Scope. Does not touch subclassing information"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1803
#: buildtools/qmake/trollprojectwidget.cpp:1905
msgid "Edit Pattern"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1804
msgid "<b>Edit pattern</b><p>Allows to edit install files pattern."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1805
msgid "Remove Pattern"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1806
msgid ""
"<b>Remove pattern</b>"
"<p>Removes install files pattern from the current install object."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:1817
#, fuzzy
msgid "Build File"
msgstr "&Byggefil:"
#: buildtools/qmake/trollprojectwidget.cpp:1818
#, fuzzy
msgid "<b>Build File</b><p>Builds the object file for this source file."
msgstr "<b>Last inn tre på nytt</b><p>Laster inn prosjektets fil-tre på nytt."
#: buildtools/qmake/trollprojectwidget.cpp:1934
msgid ""
"Do you want to delete the file <strong>%1</strong> from the project and your "
"disk?"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:2052
msgid ""
"Please specify the executable name in the project options dialog or select an "
"application subproject in the TQMake Manager."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:2053
#, fuzzy
msgid "No Executable Found"
msgstr "Navn på kjørbar:"
#: buildtools/qmake/trollprojectwidget.cpp:2186
msgid "There is no Makefile in this directory. Run qmake first?"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:2276
msgid ""
"Could not delete Function Scope.\n"
"This is an internal error, please write a bug report to bugs.trinitydesktop.org and "
"include the output of tdevelop when run from a shell."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:2276
#, fuzzy
msgid "Function Scope Deletion failed"
msgstr "Funksjoner i fil"
#: buildtools/qmake/trollprojectwidget.cpp:2284
msgid ""
"Could not delete Include Scope.\n"
"This is an internal error, please write a bug report to bugs.trinitydesktop.org and "
"include the output of tdevelop when run from a shell."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:2284
#, fuzzy
msgid "Include Scope Deletion failed"
msgstr "Ta med programikon"
#: buildtools/qmake/trollprojectwidget.cpp:2296
msgid ""
"Could not delete Scope.\n"
"This is an internal error, please write a bug report to bugs.trinitydesktop.org and "
"include the output of tdevelop when run from a shell."
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:2296
msgid "Scope Deletion failed"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:2462
msgid ""
"The project file \"%1\" has changed on disk\n"
"(Or you have \"%2\" opened in the editor, which also triggers a reload when you "
"change something in the TQMake Manager).\n"
"\n"
"Do you want to reload it?"
msgstr ""
#: buildtools/qmake/trollprojectwidget.cpp:2462
#, fuzzy
msgid "Project File Changed"
msgstr "Fil endret"
#: buildtools/qmake/trollprojectwidget.cpp:2462 src/partcontroller.cpp:1009
#: src/partcontroller.cpp:1502
msgid "Do Not Reload"
msgstr "Ikke last på nytt"
#: buildtools/qmake/scope.cpp:161
#, fuzzy, c-format
msgid "Could not parse project file: %1"
msgstr "Klarte ikke lese prosjektfil: %1"
#: buildtools/qmake/scope.cpp:162
#, fuzzy
msgid "Could not parse project file"
msgstr "Klarte ikke lese prosjektfil: %1"
#: buildtools/qmake/scope.cpp:201
#, fuzzy, c-format
msgid "Could not write project file: %1"
msgstr "Klarte ikke lese prosjektfil: %1"
#: buildtools/qmake/scope.cpp:202
#, fuzzy
msgid "Could not write project file"
msgstr "Klarte ikke skrive prosjektfila."
#: buildtools/qmake/trollprojectpart.cpp:82
#: buildtools/qmake/trollprojectpart.cpp:89
#: buildtools/qmake/trollprojectpart.cpp:279
#, fuzzy
msgid "TQMake Manager"
msgstr "QMake-håndtering"
#: buildtools/qmake/trollprojectpart.cpp:83
#, fuzzy
msgid ""
"<b>TQMake manager</b>"
"<p>The TQMake manager project tree consists of two parts. The 'overview' in the "
"upper half shows the subprojects, each one having a .pro file. The 'details' "
"view in the lower half shows the list of files for the active subproject "
"selected in the overview."
msgstr ""
"<b>QMake-håndtering</b> <b>Prosjekttreet for QMake-håndtering består av to "
"deler. Oversikten i den øvre delen viser underprosjektene, hver av dem har en "
".pro-fil. Detaljvisningen nedenfor viser fillista for det aktive "
"underprosjektet som er markert i oversikten."
#: buildtools/qmake/trollprojectpart.cpp:89
#, fuzzy
msgid "TQMake manager"
msgstr "QMake-håndtering"
#: buildtools/qmake/trollprojectpart.cpp:111
msgid "&Rebuild Project"
msgstr "&Bygg prosjektet på nytt"
#: buildtools/qmake/trollprojectpart.cpp:119
#, fuzzy
msgid "&Install Project"
msgstr "Installer objekt"
#: buildtools/qmake/trollprojectpart.cpp:122
#, fuzzy
msgid "Install project"
msgstr "Installer objekt"
#: buildtools/qmake/trollprojectpart.cpp:123
#, fuzzy
msgid ""
"<b>Install project</b>"
"<p>Runs <b>make install</b> from the project directory."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Bygg prosjekt</b> "
"<p> Kjører <b>make</b> i prosjektmappa. "
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/qmake/trollprojectpart.cpp:135
#, fuzzy
msgid "&Dist-Clean Project"
msgstr "&Rydd prosjektet"
#: buildtools/qmake/trollprojectpart.cpp:138
#, fuzzy
msgid "Dist-Clean project"
msgstr "Rydd prosjektet"
#: buildtools/qmake/trollprojectpart.cpp:139
#, fuzzy
msgid ""
"<b>Dist-Clean project</b>"
"<p>Runs <b>make distclean</b> command from the project directory."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Rydd prosjektet</b> <p<Kjører kommandoen <b>make clean</b> "
"fra prosjektmappa. "
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/qmake/trollprojectpart.cpp:143
#: languages/csharp/csharpsupportpart.cpp:65
#: languages/perl/perlsupportpart.cpp:65
msgid "Execute Main Program"
msgstr "Kjør hovedprogrammet"
#: buildtools/qmake/trollprojectpart.cpp:147
#, fuzzy
msgid ""
"<b>Execute program</b>"
"<p>Executes the currently selected subproject if it is an application or the "
"program specified in project settings, <b>Run Options</b> tab."
msgstr ""
"<b>Kjør program</b> "
"<p>Kjører hovedprogrammet som er oppgitt i prosjektinnstillingene, <b>"
"Parametre for kjøring</b>."
#: buildtools/qmake/trollprojectpart.cpp:149
msgid "&Build Subproject"
msgstr "&Bygg underprosjekt"
#: buildtools/qmake/trollprojectpart.cpp:158
msgid "&Rebuild Subproject"
msgstr "By&gg underprosjekt på nytt"
#: buildtools/qmake/trollprojectpart.cpp:167
#, fuzzy
msgid "&Install Subproject"
msgstr "Installer objekt"
#: buildtools/qmake/trollprojectpart.cpp:170
#, fuzzy
msgid "Install subproject"
msgstr "Installer objekt"
#: buildtools/qmake/trollprojectpart.cpp:171
#, fuzzy
msgid ""
"<b>Install subproject</b>"
"<p>Runs <b>make install</b> from the current subproject directory. The current "
"subproject is the subproject selected in the <b>TQMake manager</b> "
"'overview' window."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b >Bygg underprosjekt</b> "
"<p>Kjører <b>make</b> fra mappa for gjeldende underprosjekt. Gjeldende "
"underprosjekt er et underprosjekt markert i oversiktsvinduet <b>"
"QMake-styring</b>."
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/qmake/trollprojectpart.cpp:176
msgid "&Clean Subproject"
msgstr "&Rydd underprosjekt"
#: buildtools/qmake/trollprojectpart.cpp:179
msgid "Clean subproject"
msgstr "Rydd underprosjekt"
#: buildtools/qmake/trollprojectpart.cpp:180
#, fuzzy
msgid ""
"<b>Clean subproject</b>"
"<p>Runs <b>make clean</b> from the current subproject directory. The current "
"subproject is the subproject selected in the <b>TQMake manager</b> "
"'overview' window."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Rydd underprosjekt</b> "
"<p>Kjører <b>make clean</b> fra mappa for gjeldende underprosjekt. Gjeldende "
"underprosjekt er et underprosjekt markert i oversiktsvinduet <b>"
"QMake-styring</b>."
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/qmake/trollprojectpart.cpp:185
#, fuzzy
msgid "&Dist-Clean Subproject"
msgstr "&Rydd underprosjekt"
#: buildtools/qmake/trollprojectpart.cpp:188
#, fuzzy
msgid "Dist-Clean subproject"
msgstr "Rydd underprosjekt"
#: buildtools/qmake/trollprojectpart.cpp:189
#, fuzzy
msgid ""
"<b>Dist-Clean subproject</b>"
"<p>Runs <b>make distclean</b> from the current subproject directory. The "
"current subproject is the subproject selected in the <b>TQMake manager</b> "
"'overview' window."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Rydd underprosjekt</b> "
"<p>Kjører <b>make clean</b> fra mappa for gjeldende underprosjekt. Gjeldende "
"underprosjekt er et underprosjekt markert i oversiktsvinduet <b>"
"QMake-styring</b>."
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/qmake/trollprojectpart.cpp:194
msgid "Execute Subproject"
msgstr "Kjør underprosjekt"
#: buildtools/qmake/trollprojectpart.cpp:291
#, fuzzy
msgid "Loading Project..."
msgstr "Laster inn prosjektets tilleggsmoduler …"
#: buildtools/qmake/trollprojectpart.cpp:299
#, fuzzy
msgid "Choose TQt3 directory"
msgstr "Velg prosjektmappe"
#: buildtools/qmake/trollprojectpart.cpp:300
msgid ""
"Choose the TQt3 directory to use. This directory needs to have an include "
"directory containing tqt.h."
msgstr ""
#: buildtools/qmake/trollprojectpart.cpp:312
msgid ""
"The directory you gave is not a proper TQt directory, the project might not "
"work properly without one.\n"
"Please make sure you give a directory that contains a bin with the qmake binary "
"in it and for TQt3 project also contains an include directory with tqt.h in "
"it.\n"
"Do you want to try setting a TQt directory again?"
msgstr ""
#: buildtools/qmake/trollprojectpart.cpp:318
#, fuzzy
msgid "Wrong TQt directory given"
msgstr "&Beskjær tomme mapper"
#: buildtools/qmake/trollprojectpart.cpp:333
msgid ""
"You did not specify a TQt directory, and the project might not work properly "
"without one.\n"
"Do you want to try setting a TQt directory again?"
msgstr ""
#: buildtools/qmake/trollprojectpart.cpp:336
#, fuzzy
msgid "No TQt directory given"
msgstr "Neste mappe"
#: buildtools/qmake/trollprojectpart.cpp:351
#, fuzzy
msgid "Choose TQMake executable"
msgstr "htse&arch programfil:"
#: buildtools/qmake/trollprojectpart.cpp:352
msgid ""
"Choose the TQMake binary to use. TQMake is used to generate Makefiles from the "
"project files."
msgstr ""
#: buildtools/qmake/trollprojectpart.cpp:363
msgid ""
"The binary you gave is not executable, the project might not work properly.\n"
"Please make sure you give a qmake binary that is executable.\n"
"Do you want to try setting the TQMake binary again?"
msgstr ""
#: buildtools/qmake/trollprojectpart.cpp:367
#, fuzzy
msgid "Wrong TQMake binary given"
msgstr "&Beskjær tomme mapper"
#: buildtools/qmake/trollprojectpart.cpp:382
msgid ""
"You did not specify a TQMake binary, and the project might not work properly "
"without one.\n"
"Do you want to try setting a TQMake binary again?"
msgstr ""
#: buildtools/qmake/trollprojectpart.cpp:385
#, fuzzy
msgid "No TQMake binary given"
msgstr "Neste mappe"
#: buildtools/qmake/qmakescopeitem.cpp:89
msgid "Headers"
msgstr "Topptekster"
#: buildtools/qmake/qmakescopeitem.cpp:93
msgid "Forms"
msgstr "Skjemaer"
#: buildtools/qmake/qmakescopeitem.cpp:97
msgid "Corba IDLs"
msgstr "Corba IDL-er"
#: buildtools/qmake/qmakescopeitem.cpp:101
msgid "Lexsources"
msgstr "Lexkilder"
#: buildtools/qmake/qmakescopeitem.cpp:105
msgid "Yaccsources"
msgstr "Yacckilder"
#: buildtools/qmake/qmakescopeitem.cpp:109
msgid "Images"
msgstr "Bilder"
#: buildtools/qmake/qmakescopeitem.cpp:113
#, fuzzy
msgid "Resources"
msgstr "Lexkilder"
#: buildtools/qmake/qmakescopeitem.cpp:117
msgid "Distfiles"
msgstr "Distfiler"
#: buildtools/qmake/qmakescopeitem.cpp:125
msgid "Installs"
msgstr "Installerer"
#: buildtools/qmake/qmakescopeitem.cpp:129
msgid "Install object"
msgstr "Installer objekt"
#: buildtools/qmake/qmakescopeitem.cpp:134
msgid "Source Files"
msgstr "Kildefiler"
#: buildtools/ada/adaproject_part.cpp:341
msgid ""
"Could not find ada compiler.\n"
"Check if your compiler settings are correct."
msgstr ""
"Klarte ikke finne ada-kompilator.\n"
"Se etter at kompilatorinnstillingene er riktige."
#: buildtools/ada/adaproject_part.cpp:422
msgid ""
"There was an error loading the module %1.\n"
"The diagnostics are:\n"
"%2"
msgstr ""
"Det oppsto en feil ved lasting av modulen %1.\n"
"Feilmeldinga er:\n"
"%2"
#: buildtools/custommakefiles/selectnewfilesdialog.cpp:24
#, fuzzy
msgid "Add newly created files to project"
msgstr "Legg til nyopprettet fil til målet"
#: buildtools/custommakefiles/customprojectpart.cpp:79
#: buildtools/custommakefiles/customprojectpart.cpp:80
#, fuzzy
msgid "Re-Populate Project"
msgstr "&Bygg prosjektet på nytt"
#: buildtools/custommakefiles/customprojectpart.cpp:81
msgid ""
"<b>Re-Populate Project</b>"
"<p>Re-Populates the project, searching through the project directory and adding "
"all files that match one of the wildcards set in the custom manager options of "
"the project filelist."
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:87
msgid ""
"<b>Build project</b>"
"<p>Runs <b>make</b> from the project directory."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Build Options</b> tab."
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:91
#, fuzzy
msgid "&Build Active Directory"
msgstr "&Kildemappe"
#: buildtools/custommakefiles/customprojectpart.cpp:94
#, fuzzy
msgid "Build active directory"
msgstr "Mappe for pakker:"
#: buildtools/custommakefiles/customprojectpart.cpp:95
#, fuzzy
msgid ""
"<b>Build active directory</b>"
"<p>Constructs a series of make commands to build the active directory. "
"Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Bygg prosjekt</b> "
"<p> Kjører <b>make</b> i prosjektmappa. "
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/custommakefiles/customprojectpart.cpp:103
msgid ""
"<b>Compile file</b>"
"<p>Runs <b>make filename.o</b> command from the directory where 'filename' is "
"the name of currently opened file."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Build Options</b> tab."
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:115
#, fuzzy
msgid "Install Active Directory"
msgstr "Velg mappe"
#: buildtools/custommakefiles/customprojectpart.cpp:118
#, fuzzy
msgid "Install active directory"
msgstr "Databasema&ppe:"
#: buildtools/custommakefiles/customprojectpart.cpp:119
#, fuzzy
msgid ""
"<b>Install active directory</b>"
"<p>Runs <b>make install</b> command from the active directory."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Make Options</b> tab."
msgstr ""
"<b>Rydd prosjektet</b> <p<Kjører kommandoen <b>make clean</b> "
"fra prosjektmappa. "
"<br>Miljøvariabler og argumenter til «make» kan oppgis i dialogen for "
"prosjektinnstillinger, fanen <b>Make-innstillinger</b>."
#: buildtools/custommakefiles/customprojectpart.cpp:136
msgid ""
"<b>Clean project</b>"
"<p>Runs <b>make clean</b> command from the project directory."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Build Options</b> tab."
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:144
msgid ""
"<b>Execute program</b>"
"<p>Executes the main program specified in project settings, <b>Run Options</b> "
"tab. If it is not specified then the active target is used to determine the "
"application to run."
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:151
msgid ""
"<b>Build target</b>"
"<p>Runs <b>make targetname</b> from the project directory (targetname is the "
"name of the target selected)."
"<br>Environment variables and make arguments can be specified in the project "
"settings dialog, <b>Build Options</b> tab."
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:158
msgid "Make &Environment"
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:160
msgid "Make environment"
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:161
msgid ""
"<b>Make Environment</b>"
"<p> Choose the set of environment variables to be passed on to make."
"<br>Environment variables can be specified in the project settings dialog, <b>"
"Build Options</b> tab."
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:196
#, fuzzy
msgid "Custom Manager"
msgstr "&Tilpasset menyelement"
#: buildtools/custommakefiles/customprojectpart.cpp:208
msgid "&Build"
msgstr "&Bygg"
#: buildtools/custommakefiles/customprojectpart.cpp:212
msgid "&Other"
msgstr "&Andre"
#: buildtools/custommakefiles/customprojectpart.cpp:215
msgid "Ma&ke"
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:243
msgid "Make Active Directory"
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:245
msgid ""
"<b>Make active directory</b>"
"<p>Chooses this directory as the destination for new files created using "
"wizards like the <i>New Class</i> wizard."
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:259
#, fuzzy
msgid "Remove from blacklist"
msgstr "Fjern fra arkivet"
#: buildtools/custommakefiles/customprojectpart.cpp:261
msgid ""
"<b>Remove from blacklist</b>"
"<p>Removes the given file or directory from the blacklist if it is already in "
"it."
"<br>The blacklist contains files and directories that should be ignored even if "
"they match a project filetype pattern"
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:269
#, fuzzy
msgid "Add to blacklist"
msgstr "Legg til tomt stoppunkt"
#: buildtools/custommakefiles/customprojectpart.cpp:271
msgid ""
"<b>Add to blacklist</b>"
"<p>Adds the given file or directory to the blacklist."
"<br>The blacklist contains files and directories that should be ignored even if "
"they match a project filetype pattern"
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:319
#, fuzzy
msgid "Add Selected File/Dir(s) to Project"
msgstr "Legg til nyopprettet fil til målet"
#: buildtools/custommakefiles/customprojectpart.cpp:321
msgid ""
"<b>Add to project</b>"
"<p>Adds selected file/dir(s) to the list of files in the project. Note that the "
"files should be manually added to the corresponding makefile or build.xml."
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:325
msgid "Add Selected Dir(s) to Project (recursive)"
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:327
msgid ""
"<b>Add to project</b>"
"<p>Recursively adds selected dir(s) to the list of files in the project. Note "
"that the files should be manually added to the corresponding makefile or "
"build.xml."
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:334
#, fuzzy
msgid "Remove Selected File/Dir(s) From Project"
msgstr "Fjern %1 fra prosjektet"
#: buildtools/custommakefiles/customprojectpart.cpp:336
msgid ""
"<b>Remove from project</b>"
"<p>Removes selected file/dir(s) from the list of files in the project. Note "
"that the files should be manually excluded from the corresponding makefile or "
"build.xml."
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:341
msgid "Remove Selected Dir(s) From Project (recursive)"
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:343
msgid ""
"<b>Remove from project</b>"
"<p>Recursively removes selected dir(s) from the list of files in the project. "
"Note that the files should be manually excluded from the corresponding makefile "
"or build.xml."
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:461
msgid ""
"This project does not contain any files yet.\n"
"Populate it with all C/C++/Java files below the project directory?"
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:463
msgid "Populate"
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:463
msgid "Do Not Populate"
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:1161
msgid "Object Files"
msgstr ""
#: buildtools/custommakefiles/customprojectpart.cpp:1162
msgid "Other Files"
msgstr ""
#: buildtools/custommakefiles/custommanagerwidget.cpp:43
msgid ""
"_: blacklisted files and directories are not considered part of the project, "
"even if they fit one of the wildcard patterns in the project file list\n"
"Blacklisted files/dirs"
msgstr ""
#: buildtools/pascal/pascalproject_part.cpp:66
msgid ""
"<b>Build project</b>"
"<p>Runs the compiler on a main source file of the project. The compiler and the "
"main source file can be set in project settings, <b>Pascal Compiler</b> tab."
msgstr ""
#: buildtools/pascal/pascalproject_part.cpp:72
msgid ""
"<b>Execute program</b>"
"<p>Executes the main program specified in project settings, <b>Run options</b> "
"tab. If nothing is set, the binary file with the same name as the main source "
"file name is executed."
msgstr ""
#: buildtools/pascal/pascalproject_part.cpp:341
msgid ""
"Could not find pascal compiler.\n"
"Check if your compiler settings are correct."
msgstr ""
#: kdevdesigner/designer/actioneditorimpl.cpp:52
msgid "Actions"
msgstr "Handlinger"
#: kdevdesigner/designer/actioneditorimpl.cpp:57
#: kdevdesigner/designer/actionlistview.cpp:90
msgid "New &Action"
msgstr ""
#: kdevdesigner/designer/actioneditorimpl.cpp:58
#: kdevdesigner/designer/actionlistview.cpp:91
msgid "New Action &Group"
msgstr ""
#: kdevdesigner/designer/actioneditorimpl.cpp:59
#: kdevdesigner/designer/actionlistview.cpp:92
msgid "New &Dropdown Action Group"
msgstr ""
#: kdevdesigner/designer/hierarchyview.cpp:376
#: languages/sql/sqloutputwidget.cpp:121
msgid "Database"
msgstr "Database"
#: kdevdesigner/designer/hierarchyview.cpp:630
#: kdevdesigner/designer/hierarchyview.cpp:637
#: kdevdesigner/designer/mainwindow.cpp:1805
#: kdevdesigner/designer/mainwindow.cpp:1824
#: kdevdesigner/designer/mainwindow.cpp:1844
#: kdevdesigner/designer/mainwindow.cpp:1884
#: kdevdesigner/designer/mainwindow.cpp:1945
#: kdevdesigner/designer/wizardeditorimpl.cpp:133
#, c-format
msgid "Add Page to %1"
msgstr ""
#: kdevdesigner/designer/hierarchyview.cpp:656
#: kdevdesigner/designer/hierarchyview.cpp:667
#: kdevdesigner/designer/mainwindow.cpp:1813
#: kdevdesigner/designer/mainwindow.cpp:1832
#: kdevdesigner/designer/mainwindow.cpp:1851
#: kdevdesigner/designer/mainwindow.cpp:1894
#: kdevdesigner/designer/mainwindow.cpp:1953
#: kdevdesigner/designer/wizardeditorimpl.cpp:151
msgid "Delete Page %1 of %2"
msgstr ""
#: kdevdesigner/designer/hierarchyview.cpp:753
msgid "Class Variables"
msgstr ""
#: kdevdesigner/designer/hierarchyview.cpp:835
msgid "Functions"
msgstr "Funksjoner"
#: kdevdesigner/designer/hierarchyview.cpp:846
#: kdevdesigner/designer/mainwindowactions.cpp:192
msgid "Slots"
msgstr "Kortplass"
#: kdevdesigner/designer/hierarchyview.cpp:1052
msgid "New..."
msgstr "Ny …"
#: kdevdesigner/designer/hierarchyview.cpp:1061
msgid "Goto Implementation"
msgstr ""
#: kdevdesigner/designer/formfile.cpp:297
#: kdevdesigner/designer/hierarchyview.cpp:1105
#: kdevdesigner/designer/hierarchyview.cpp:1109
#: kdevdesigner/designer/hierarchyview.cpp:1221
#: kdevdesigner/designer/sourcefile.cpp:141
#, c-format
msgid "Edit %1"
msgstr "Rediger %1"
#: kdevdesigner/designer/editfunctionsimpl.cpp:150
#: kdevdesigner/designer/hierarchyview.cpp:1144
msgid "Remove Function"
msgstr "Fjern funksjon"
#: kdevdesigner/designer/hierarchyview.cpp:1151
msgid "Remove Variable"
msgstr ""
#: kdevdesigner/designer/hierarchyview.cpp:1202
msgid "This variable has already been declared."
msgstr ""
#: kdevdesigner/designer/hierarchyview.cpp:1230
msgid "Add Variable"
msgstr "Legg til variabel"
#: kdevdesigner/designer/hierarchyview.cpp:1247
msgid "Objects"
msgstr "Objekter"
#: kdevdesigner/designer/hierarchyview.cpp:1248
msgid ""
"List of all widgets and objects of the current form in hierarchical order"
msgstr ""
#: kdevdesigner/designer/hierarchyview.cpp:1249
msgid "Members"
msgstr "Medlemmer"
#: kdevdesigner/designer/hierarchyview.cpp:1250
msgid "List of all members of the current form"
msgstr ""
#: kdevdesigner/designer/hierarchyview.cpp:1269
msgid "Class Declarations"
msgstr ""
#: kdevdesigner/designer/hierarchyview.cpp:1270
msgid "List of all classes and its declarations of the current source file"
msgstr ""
#: kdevdesigner/designer/widgetfactory.cpp:277
msgid "Move Tab Page"
msgstr ""
#: kdevdesigner/designer/widgetfactory.cpp:814
msgid "Tab 1"
msgstr "Tab 1"
#: kdevdesigner/designer/widgetfactory.cpp:817
msgid "Tab 2"
msgstr "Tab 2"
#: kdevdesigner/designer/widgetfactory.cpp:960
msgid "Page 1"
msgstr "Side 1"
#: kdevdesigner/designer/widgetfactory.cpp:963
msgid "Page 2"
msgstr ""
#: kdevdesigner/designer/formfile.cpp:195
#: kdevdesigner/designer/formfile.cpp:218
msgid "The file %1 could not be saved"
msgstr ""
#: kdevdesigner/designer/formfile.cpp:230
msgid "Failed to save file '%1'."
msgstr ""
#: kdevdesigner/designer/formfile.cpp:236
msgid "'%1' saved."
msgstr ""
#: kdevdesigner/designer/formfile.cpp:264
#: kdevdesigner/designer/formfile.cpp:862
#: kdevdesigner/designer/mainwindowactions.cpp:1212
#, fuzzy
msgid "*.ui|TQt User-Interface Files"
msgstr "Br&ukerflatens hovedmåte"
#: kdevdesigner/designer/formfile.cpp:265
#: kdevdesigner/designer/formfile.cpp:863
#: kdevdesigner/designer/mainwindowactions.cpp:1223
msgid "*|All Files"
msgstr "*|Alle filer"
#: kdevdesigner/designer/formfile.cpp:266
#: kdevdesigner/designer/formfile.cpp:864
msgid "Save Form '%1' As"
msgstr ""
#: kdevdesigner/designer/formfile.cpp:277
msgid "File Already Exists"
msgstr "Fila finnes fra før"
#: kdevdesigner/designer/formfile.cpp:278
msgid "The file already exists. Do you wish to overwrite it?"
msgstr ""
#: kdevdesigner/designer/formfile.cpp:328
#: kdevdesigner/designer/formwindow.cpp:1841
msgid "Save Form"
msgstr ""
#: kdevdesigner/designer/formfile.cpp:329
msgid "Save changes to form '%1'?"
msgstr ""
#: kdevdesigner/designer/editfunctionsimpl.cpp:218
#: kdevdesigner/designer/formfile.cpp:330
#: kdevdesigner/designer/formfile.cpp:657
#: kdevdesigner/designer/mainwindow.cpp:2517
#: kdevdesigner/designer/mainwindow.cpp:2847
#: kdevdesigner/designer/mainwindowactions.cpp:1129
#: kdevdesigner/designer/sourcefile.cpp:224
#: kdevdesigner/designer/sourcefile.cpp:269
#: kdevdesigner/designer/variabledialogimpl.cpp:105
msgid "&No"
msgstr "&Nei"
#: kdevdesigner/designer/formfile.cpp:440
msgid "Using ui.h File"
msgstr ""
#: kdevdesigner/designer/formfile.cpp:441
msgid ""
"An \"ui.h\" file for this form already exists.\n"
"Do you want to use it or create a new one?"
msgstr ""
#: kdevdesigner/designer/formfile.cpp:443
msgid "Use Existing"
msgstr ""
#: kdevdesigner/designer/formfile.cpp:443
msgid "Create New"
msgstr "Lag ny"
#: kdevdesigner/designer/formfile.cpp:450
msgid "Creating ui.h file"
msgstr ""
#: kdevdesigner/designer/formfile.cpp:451
msgid "Do you want to create an new \"ui.h\" file?"
msgstr ""
#: kdevdesigner/designer/formfile.cpp:654
#: kdevdesigner/designer/sourcefile.cpp:266
#, fuzzy
msgid "TQt Designer"
msgstr "Qt Designer"
#: kdevdesigner/designer/formfile.cpp:655
#: kdevdesigner/designer/sourcefile.cpp:267
#, fuzzy
msgid ""
"File '%1' has been changed outside TQt Designer.\n"
"Do you want to reload it?"
msgstr ""
"Fila «%1» er endret på disk.\n"
"\n"
"Vil du laste den inn på nytt?"
#: kdevdesigner/designer/formfile.cpp:855
#: kdevdesigner/designer/sourcefile.cpp:280
msgid "Invalid Filename"
msgstr "Ugyldig filnavn"
#: kdevdesigner/designer/formfile.cpp:856
msgid ""
"The project already contains a form with a\n"
"filename of '%1'. Please choose a new filename."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:797
#: kdevdesigner/designer/mainwindowactions.cpp:798
#: kdevdesigner/designer/newformimpl.cpp:364
#: kdevdesigner/designer/startdialogimpl.cpp:67
#: kdevdesigner/designer/workspace.cpp:159
msgid "<No Project>"
msgstr ""
#: kdevdesigner/designer/startdialogimpl.cpp:169
msgid "Designer Files (*.ui *.pro)"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:155
#: kdevdesigner/designer/startdialogimpl.cpp:170
msgid "TQt User-Interface Files (*.ui)"
msgstr ""
#: kdevdesigner/designer/startdialogimpl.cpp:171
msgid "QMAKE Project Files (*.pro)"
msgstr ""
#: kdevdesigner/designer/startdialogimpl.cpp:177
msgid "All Files (*)"
msgstr ""
#: kdevdesigner/designer/iconvieweditorimpl.cpp:132
#: kdevdesigner/designer/listboxeditorimpl.cpp:164
msgid "Edit the Items of '%1'"
msgstr ""
#: kdevdesigner/designer/wizardeditorimpl.cpp:83
msgid "Edit Wizard Pages"
msgstr ""
#: kdevdesigner/designer/wizardeditorimpl.cpp:172
#: kdevdesigner/designer/wizardeditorimpl.cpp:192
msgid "Swap Pages %1 and %2 of %3"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1971
#: kdevdesigner/designer/wizardeditorimpl.cpp:220
msgid "Rename page %1 of %2"
msgstr ""
#: kdevdesigner/designer/wizardeditorimpl.cpp:251
msgid "Move Page %1 to %2 in %3"
msgstr ""
#: kdevdesigner/designer/sourcefile.cpp:222
msgid "Save Code"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:2516
#: kdevdesigner/designer/mainwindowactions.cpp:1128
#: kdevdesigner/designer/sourcefile.cpp:223
msgid "Save changes to '%1'?"
msgstr ""
#: kdevdesigner/designer/sourcefile.cpp:281
msgid ""
"The project already contains a source file with \n"
"filename '%1'. Please choose a new filename."
msgstr ""
#: kdevdesigner/designer/actiondnd.cpp:349
#: kdevdesigner/designer/actiondnd.cpp:402
msgid "Delete Toolbar"
msgstr ""
#: kdevdesigner/designer/actiondnd.cpp:352
#: kdevdesigner/designer/actiondnd.cpp:432
msgid "Delete Toolbar '%1'"
msgstr ""
#: kdevdesigner/designer/actiondnd.cpp:397
msgid "Delete Separator"
msgstr ""
#: kdevdesigner/designer/actiondnd.cpp:400
msgid "Insert Separator"
msgstr "Sett inn delelinje"
#: kdevdesigner/designer/actiondnd.cpp:411
#: kdevdesigner/designer/actiondnd.cpp:466
#: kdevdesigner/designer/actiondnd.cpp:489
msgid "Delete Action '%1' From Toolbar '%2'"
msgstr ""
#: kdevdesigner/designer/actiondnd.cpp:426
msgid "Add Separator to Toolbar '%1'"
msgstr ""
#: kdevdesigner/designer/actiondnd.cpp:506
#: kdevdesigner/designer/actiondnd.cpp:573
msgid "Add Action '%1' to Toolbar '%2'"
msgstr ""
#: kdevdesigner/designer/actiondnd.cpp:566
msgid "Insert/Move Action"
msgstr ""
#: kdevdesigner/designer/actiondnd.cpp:567
msgid ""
"Action '%1' has already been added to this toolbar.\n"
"An Action may only occur once in a given toolbar."
msgstr ""
#: kdevdesigner/designer/actiondnd.cpp:701
msgid "Add Widget '%1' to Toolbar '%2'"
msgstr ""
#: kdevdesigner/designer/projectsettingsimpl.cpp:96
msgid ""
"*.db|Database Files\n"
"*|All Files"
msgstr ""
"*.db|Databasefiler\n"
"*|Alle filer"
#: kdevdesigner/designer/projectsettingsimpl.cpp:104
msgid ""
"*.pro|Project Files\n"
"*|All Files"
msgstr ""
"*.pro|Prosjektfiler\n"
"*|Alle filer"
#: kdevdesigner/designer/editfunctionsimpl.cpp:135
msgid "Add/Remove functions of '%1'"
msgstr ""
#: kdevdesigner/designer/editfunctionsimpl.cpp:195
#: kdevdesigner/designer/propertyeditor.cpp:4104
msgid "Add Function"
msgstr "Legg til funksjon"
#: kdevdesigner/designer/editfunctionsimpl.cpp:206
msgid "Change Function Attributes"
msgstr ""
#: kdevdesigner/designer/editfunctionsimpl.cpp:217
msgid ""
"Some syntactically incorrect functions have been defined.\n"
"Remove these functions?"
msgstr ""
#: kdevdesigner/designer/menubareditor.cpp:157
msgid "new menu"
msgstr ""
#: kdevdesigner/designer/menubareditor.cpp:158
#: kdevdesigner/designer/popupmenueditor.cpp:304
msgid "new separator"
msgstr ""
#: kdevdesigner/designer/menubareditor.cpp:190
#: kdevdesigner/designer/menubareditor.cpp:194
#: kdevdesigner/designer/menubareditor.cpp:1012
msgid "Add Menu"
msgstr ""
#: kdevdesigner/designer/menubareditor.cpp:242
msgid "separator"
msgstr ""
#: kdevdesigner/designer/menubareditor.cpp:381
msgid "Cut Menu"
msgstr ""
#: kdevdesigner/designer/menubareditor.cpp:404
msgid "Paste Menu"
msgstr ""
#: kdevdesigner/designer/menubareditor.cpp:496
msgid "Delete Menu"
msgstr ""
#: kdevdesigner/designer/menubareditor.cpp:1009
msgid "Item Dragged"
msgstr ""
#: kdevdesigner/designer/menubareditor.cpp:1048
msgid "Move Menu Left"
msgstr ""
#: kdevdesigner/designer/menubareditor.cpp:1070
msgid "Move Menu Right"
msgstr ""
#: kdevdesigner/designer/menubareditor.cpp:1101
#: kdevdesigner/designer/menubareditor.cpp:1106
msgid "Rename Menu"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:422
msgid "Reset the property to its default value"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:423
msgid "Click this button to reset the property to its default value"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:1090
#: kdevdesigner/designer/propertyeditor.cpp:1151
msgid "False"
msgstr "Usann"
#: kdevdesigner/designer/propertyeditor.cpp:1091
#: kdevdesigner/designer/propertyeditor.cpp:1149
msgid "True"
msgstr "Sann"
#: kdevdesigner/designer/propertyeditor.cpp:1511
#: kdevdesigner/designer/propertyeditor.cpp:1533
#: kdevdesigner/designer/propertyeditor.cpp:1606
#: kdevdesigner/designer/propertyeditor.cpp:1620
msgid "width"
msgstr "bredde"
#: kdevdesigner/designer/propertyeditor.cpp:1513
#: kdevdesigner/designer/propertyeditor.cpp:1538
#: kdevdesigner/designer/propertyeditor.cpp:1608
#: kdevdesigner/designer/propertyeditor.cpp:1622
msgid "height"
msgstr "høyde"
#: kdevdesigner/designer/propertyeditor.cpp:1757
#: kdevdesigner/designer/propertyeditor.cpp:1770
#: kdevdesigner/designer/propertyeditor.cpp:1820
msgid "Red"
msgstr "Rød"
#: kdevdesigner/designer/propertyeditor.cpp:1759
#: kdevdesigner/designer/propertyeditor.cpp:1772
#: kdevdesigner/designer/propertyeditor.cpp:1822
msgid "Green"
msgstr "Grønn"
#: kdevdesigner/designer/propertyeditor.cpp:1761
#: kdevdesigner/designer/propertyeditor.cpp:1774
#: kdevdesigner/designer/propertyeditor.cpp:1824
msgid "Blue"
msgstr "Blå"
#: kdevdesigner/designer/propertyeditor.cpp:1879
#: kdevdesigner/designer/propertyeditor.cpp:1898
#: kdevdesigner/designer/propertyeditor.cpp:1963
msgid "Family"
msgstr "Familie"
#: kdevdesigner/designer/propertyeditor.cpp:1881
#: kdevdesigner/designer/propertyeditor.cpp:1901
#: kdevdesigner/designer/propertyeditor.cpp:1965
msgid "Point Size"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:109
#: kdevdesigner/designer/propertyeditor.cpp:1883
#: kdevdesigner/designer/propertyeditor.cpp:1903
#: kdevdesigner/designer/propertyeditor.cpp:1967
msgid "Bold"
msgstr "Fet"
#: kdevdesigner/designer/multilineeditorimpl.cpp:115
#: kdevdesigner/designer/propertyeditor.cpp:1887
#: kdevdesigner/designer/propertyeditor.cpp:1907
#: kdevdesigner/designer/propertyeditor.cpp:1971
msgid "Underline"
msgstr "Understrek"
#: kdevdesigner/designer/propertyeditor.cpp:1889
#: kdevdesigner/designer/propertyeditor.cpp:1909
#: kdevdesigner/designer/propertyeditor.cpp:1973
msgid "Strikeout"
msgstr "Overstreking"
#: kdevdesigner/designer/propertyeditor.cpp:2006
#: kdevdesigner/designer/propertyeditor.cpp:2040
msgid "Table"
msgstr "Tabell"
#: kdevdesigner/designer/propertyeditor.cpp:2009
#: kdevdesigner/designer/propertyeditor.cpp:2063
msgid "Field"
msgstr "Felt"
#: kdevdesigner/designer/propertyeditor.cpp:2177
#: kdevdesigner/designer/propertyeditor.cpp:2193
#: kdevdesigner/designer/propertyeditor.cpp:2243
msgid "horizontalStretch"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:2179
#: kdevdesigner/designer/propertyeditor.cpp:2195
#: kdevdesigner/designer/propertyeditor.cpp:2245
msgid "verticalStretch"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:2226
msgid "%1/%2/%3/%4"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:2381
msgid "Up-Arrow"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:3489
#: kdevdesigner/designer/propertyeditor.cpp:3503
msgid "Set '%1' of '%2'"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:3631
msgid "Sort &Categorized"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:3632
msgid "Sort &Alphabetically"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:3772
msgid "Reset '%1' of '%2'"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:3879
msgid ""
"<p><b>TQWidget::%1</b></p>"
"<p>There is no documentation available for this property.</p>"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:4031
msgid "New Signal Handler"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:4032
msgid "Delete Signal Handler"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:4053
msgid "Remove Connection"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:2600
#: kdevdesigner/designer/propertyeditor.cpp:4086
msgid "Add Connection"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:4145
#: kdevdesigner/designer/propertyeditor.cpp:4184
#: kdevdesigner/designer/propertyeditor.cpp:4310
msgid "Property Editor"
msgstr "Rediger egenskaper"
#: kdevdesigner/designer/propertyeditor.cpp:4149
msgid "P&roperties"
msgstr "&Egenskaper"
#: kdevdesigner/designer/propertyeditor.cpp:4151
msgid "Signa&l Handlers"
msgstr ""
#: kdevdesigner/designer/propertyeditor.cpp:4193
msgid "Property Editor (%1)"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:3710
#: kdevdesigner/designer/propertyeditor.cpp:4319
msgid "Signal Handlers"
msgstr ""
#: kdevdesigner/designer/tableeditorimpl.cpp:346
msgid "Edit the Rows and Columns of '%1' "
msgstr ""
#: kdevdesigner/designer/connectiontable.cpp:38
msgid "Sender"
msgstr "Avsender"
#: kdevdesigner/designer/connectiontable.cpp:40
msgid "Receiver"
msgstr "Mottaker"
#: kdevdesigner/designer/customwidgeteditorimpl.cpp:222
msgid "Adding Custom Widget"
msgstr ""
#: kdevdesigner/designer/customwidgeteditorimpl.cpp:223
msgid ""
"Custom widget names must be unique.\n"
"A custom widget called '%1' already exists, so it is not possible to add "
"another widget with this name."
msgstr ""
#: kdevdesigner/designer/customwidgeteditorimpl.cpp:272
msgid "Removing Custom Widget"
msgstr ""
#: kdevdesigner/designer/customwidgeteditorimpl.cpp:273
msgid "The custom widget '%1' is in use, so it cannot be removed."
msgstr ""
#: kdevdesigner/designer/customwidgeteditorimpl.cpp:379
msgid "*.h *.h++ *.hxx *.hh|Header Files"
msgstr ""
#: kdevdesigner/designer/customwidgeteditorimpl.cpp:397
msgid "Renaming Custom Widget"
msgstr ""
#: kdevdesigner/designer/customwidgeteditorimpl.cpp:398
msgid ""
"Custom widget names must be unique.\n"
"A custom widget called '%1' already exists, so it is not possible to rename "
"this widget with this name."
msgstr ""
#: kdevdesigner/designer/customwidgeteditorimpl.cpp:684
#: kdevdesigner/designer/customwidgeteditorimpl.cpp:752
msgid ""
"*.cw|Custom-Widget Description\n"
"*|All Files"
msgstr ""
#: kdevdesigner/designer/listvieweditorimpl.cpp:130
msgid "Edit the Items and Columns of '%1'"
msgstr ""
#: kdevdesigner/designer/listvieweditorimpl.cpp:287
msgid "New Column"
msgstr "Ny kolonne"
#: kdevdesigner/designer/listvieweditorimpl.cpp:399
msgid "Item"
msgstr "Element"
#: kdevdesigner/designer/listvieweditorimpl.cpp:417
msgid "Subitem"
msgstr ""
#: kdevdesigner/designer/kdevdesigner_part.cpp:98 src/partcontroller.cpp:137
msgid "Save Al&l"
msgstr "Lagre a&lt"
#: kdevdesigner/designer/kdevdesigner_part.cpp:100
#: kdevdesigner/designer/mainwindowactions.cpp:740
msgid "Create &Template..."
msgstr "Oppre&tt mal …"
#: kdevdesigner/designer/kdevdesigner_part.cpp:116
#: kdevdesigner/designer/mainwindowactions.cpp:186
msgid "Chec&k Accelerators"
msgstr "Sje&kk hurtigtaster"
#: kdevdesigner/designer/kdevdesigner_part.cpp:118
#: kdevdesigner/designer/mainwindowactions.cpp:193
msgid "S&lots..."
msgstr "S&lots …"
#: kdevdesigner/designer/kdevdesigner_part.cpp:120
#: kdevdesigner/designer/mainwindowactions.cpp:200
msgid "Co&nnections..."
msgstr "Tilkobli&nger …"
#: kdevdesigner/designer/kdevdesigner_part.cpp:122
#: kdevdesigner/designer/mainwindowactions.cpp:214
msgid "&Form Settings..."
msgstr "&Skjemainnstillinger …"
#: kdevdesigner/designer/kdevdesigner_part.cpp:125
#: kdevdesigner/designer/mainwindowactions.cpp:808
msgid "&Add File..."
msgstr "&Legg til fil …"
#: kdevdesigner/designer/kdevdesigner_part.cpp:127
#: kdevdesigner/designer/mainwindowactions.cpp:819
msgid "&Image Collection..."
msgstr "B&ildesamling …"
#: kdevdesigner/designer/kdevdesigner_part.cpp:129
#: kdevdesigner/designer/mainwindowactions.cpp:829
msgid "&Database Connections..."
msgstr "&Databasekoblinger …"
#: kdevdesigner/designer/kdevdesigner_part.cpp:131
msgid "&Designer Project Settings..."
msgstr "Prosjektvalg for &designer …"
#: kdevdesigner/designer/kdevdesigner_part.cpp:135
#: kdevdesigner/designer/mainwindowactions.cpp:432
msgid "&Pointer"
msgstr "&Peker"
#: kdevdesigner/designer/kdevdesigner_part.cpp:138
#: kdevdesigner/designer/mainwindowactions.cpp:440
msgid "&Connect Signal/Slots"
msgstr "&Koble signal/slots"
#: kdevdesigner/designer/kdevdesigner_part.cpp:140
#: kdevdesigner/designer/mainwindowactions.cpp:448
msgid "Tab &Order"
msgstr "Tab-&rekkefølge"
#: kdevdesigner/designer/kdevdesigner_part.cpp:142
#: kdevdesigner/designer/mainwindowactions.cpp:455
msgid "Set &Buddy"
msgstr "Sett &kamerat"
#: kdevdesigner/designer/kdevdesigner_part.cpp:144
#: kdevdesigner/designer/mainwindowactions.cpp:605
msgid "Configure Toolbox..."
msgstr "Sett opp verktøykasse …"
#: kdevdesigner/designer/kdevdesigner_part.cpp:145
#: kdevdesigner/designer/mainwindowactions.cpp:490
msgid "Edit &Custom Widgets..."
msgstr ""
#: kdevdesigner/designer/kdevdesigner_part.cpp:147
#: kdevdesigner/designer/mainwindowactions.cpp:327
msgid "Adjust &Size"
msgstr "Juster &størrelse"
#: kdevdesigner/designer/kdevdesigner_part.cpp:149
#: kdevdesigner/designer/mainwindowactions.cpp:334
msgid "Lay Out &Horizontally"
msgstr "Legg ut &vannrett"
#: kdevdesigner/designer/kdevdesigner_part.cpp:151
#: kdevdesigner/designer/mainwindowactions.cpp:341
msgid "Lay Out &Vertically"
msgstr "Legg ut &loddrett"
#: kdevdesigner/designer/kdevdesigner_part.cpp:153
msgid "Lay Out in &Grid"
msgstr "Le&gg ut i rutenett"
#: kdevdesigner/designer/kdevdesigner_part.cpp:155
#: kdevdesigner/designer/mainwindowactions.cpp:355
#, fuzzy
msgid "Lay Out Horizontally (in S&plitter)"
msgstr "Legg ut vannrett (i S&plitter)"
#: kdevdesigner/designer/kdevdesigner_part.cpp:157
#: kdevdesigner/designer/mainwindowactions.cpp:362
#, fuzzy
msgid "Lay Out Vertically (in Sp&litter)"
msgstr "Legg ut loddrett (i Sp&litter)"
#: kdevdesigner/designer/formwindow.cpp:971
#: kdevdesigner/designer/formwindow.cpp:1076
#: kdevdesigner/designer/kdevdesigner_part.cpp:159
#: kdevdesigner/designer/mainwindowactions.cpp:369
msgid "&Break Layout"
msgstr "&Bryt utlegg"
#: kdevdesigner/designer/kdevdesigner_part.cpp:161
msgid "Add Spacer"
msgstr "Legg til skiller"
#: kdevdesigner/designer/kdevdesigner_part.cpp:164
#: kdevdesigner/designer/mainwindowactions.cpp:857
msgid "Preview &Form"
msgstr "&Forhåndsvis skjema"
#: kdevdesigner/designer/kdevdesigner_part.cpp:166
msgid "Ne&xt Form"
msgstr "&Neste skjema"
#: kdevdesigner/designer/kdevdesigner_part.cpp:168
msgid "Pre&vious Form"
msgstr "&Forrige skjema"
#: kdevdesigner/designer/kdevdesigner_part.cpp:172
msgid "Configure &KDevDesigner..."
msgstr "Sett opp &KDevDesigner …"
#: kdevdesigner/designer/kdevdesigner_part.cpp:277
msgid "KDevDesignerPart"
msgstr "KDevDesignerPart"
#: kdevdesigner/designer/outputwindow.cpp:80
msgid "Warnings/Errors"
msgstr ""
#: kdevdesigner/designer/outputwindow.cpp:85
#: languages/ada/problemreporter.cpp:89 languages/cpp/problemreporter.cpp:223
#: languages/java/problemreporter.cpp:93
#: languages/pascal/problemreporter.cpp:83 languages/php/phperrorview.cpp:184
#: vcs/subversion/svn_blamewidget.cpp:35
msgid "Line"
msgstr "Linje"
#: kdevdesigner/designer/workspace.cpp:598
msgid "&Open Source File"
msgstr ""
#: kdevdesigner/designer/workspace.cpp:601
msgid "&Remove Source File From Project"
msgstr ""
#: kdevdesigner/designer/workspace.cpp:604
msgid "&Open Form"
msgstr ""
#: kdevdesigner/designer/workspace.cpp:607
#: kdevdesigner/designer/workspace.cpp:617
msgid "&Remove Form From Project"
msgstr ""
#: kdevdesigner/designer/workspace.cpp:610
msgid "&Open Form Source"
msgstr ""
#: kdevdesigner/designer/workspace.cpp:614
msgid "&Remove Source File From Form"
msgstr ""
#: kdevdesigner/designer/workspace.cpp:623
msgid "&Open Source"
msgstr ""
#: kdevdesigner/designer/variabledialogimpl.cpp:104
msgid ""
"One variable has been declared twice.\n"
"Remove this variable?"
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:360
msgid "&Horizontal"
msgstr "&Vannrett"
#: kdevdesigner/designer/formwindow.cpp:380
#: kdevdesigner/designer/formwindow.cpp:507
#, fuzzy
msgid ""
"<b>A %1 (custom widget)</b> "
"<p>Click <b>Edit Custom Widgets...</b> in the <b>Tools|Custom</b> "
"menu to add and change custom widgets. You can add properties as well as "
"signals and slots to integrate custom widgets into <i>TQt Designer</i>"
", and provide a pixmap which will be used to represent the widget on the "
"form.</p>"
msgstr ""
"<b>Et %1 (selvvalgt skjermelement)</b>"
"<p>Trykk <b>Rediger egne skjermelementer …</b> i menyen <b>Verktøy|Selvvalgt</b> "
"for å legge til og endre selvvalgte skjermelementer. Signaler og spalter og "
"andre egenskaper kan legges til for å integrere dem i Qt Designer, og oppgi et "
"pixmap-bilde som brukes til å representere elementet på skjemaet.</p>"
#: kdevdesigner/designer/formwindow.cpp:387
#: kdevdesigner/designer/formwindow.cpp:514
msgid "A %1 (custom widget)"
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:458
msgid "Reparent Widgets"
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:466
#: kdevdesigner/designer/formwindow.cpp:472
#: kdevdesigner/designer/formwindow.cpp:482
#, c-format
msgid "Insert %1"
msgstr "Sett inn %1"
#: kdevdesigner/designer/formwindow.cpp:663
msgid "Set buddy for '%1' to..."
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:665
msgid "Connect '%1' with..."
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:687
#: kdevdesigner/designer/formwindow.cpp:733
msgid "Change Tab Order"
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:840
#: kdevdesigner/designer/formwindow.cpp:1329
#: kdevdesigner/designer/formwindow.cpp:1341
#: kdevdesigner/designer/sizehandle.cpp:216
msgid "%1/%2"
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:874
msgid "Connect '%1' to '%2'"
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:902
msgid "Set buddy '%1' to '%2'"
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:905
msgid "Set buddy '%1' to ..."
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:963
#: kdevdesigner/designer/formwindow.cpp:1068
msgid "Inserting Widget"
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:964
#: kdevdesigner/designer/formwindow.cpp:1069
msgid ""
"You tried to insert a widget into the layout Container Widget '%1'.\n"
"This is not possible. In order to insert the widget, the layout of '%1'\n"
"must first be broken.\n"
"Break the layout or cancel the operation?"
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:1047
#, c-format
msgid "Set Buddy for %1"
msgstr "Oppgi kamerat for %1"
#: kdevdesigner/designer/formwindow.cpp:1313
#: kdevdesigner/designer/formwindow.cpp:1351
msgid "Use Size Hint"
msgstr "Bruk hint om størrelse"
#: kdevdesigner/designer/formwindow.cpp:1513
#: kdevdesigner/designer/formwindow.cpp:1525
#: kdevdesigner/designer/formwindow.cpp:1533
#: kdevdesigner/designer/mainwindowactions.cpp:326
msgid "Adjust Size"
msgstr "Tilpass størrelsen"
#: kdevdesigner/designer/formwindow.cpp:1743
msgid "Click widgets to change the tab order..."
msgstr "Trykk på skjermelementer for å endre fane-rekkefølge …"
#: kdevdesigner/designer/formwindow.cpp:1754
msgid "Drag a line to create a connection..."
msgstr "Dra en linje for å opprette en forbindelse …"
#: kdevdesigner/designer/formwindow.cpp:1756
msgid "Drag a line to set a buddy..."
msgstr "Dra en linje for å oppgi en kamerat …"
#: kdevdesigner/designer/formwindow.cpp:1762
msgid "Click on the form to insert a %1..."
msgstr "Trykk på skjemaet for å sette inn en %1 …"
#: kdevdesigner/designer/formwindow.cpp:1834
#, fuzzy
msgid ""
"The following custom widgets are used in '%1',\n"
"but are not known to TQt Designer:\n"
msgstr ""
"Følgende selvvalgte skjermelementer er \n"
"brukt u «%1», men ukjente for Qt Designer:\n"
#: kdevdesigner/designer/formwindow.cpp:1838
msgid ""
"If you save this form and generate code for it using uic, \n"
"the generated code will not compile.\n"
"Do you want to save this form now?"
msgstr ""
"Hvis du lagrer dette skjemaet og lager kode\n"
"for det med uic, så kan koden ikke kompileres.\n"
"Vil du lagre dette skjemaet nå?"
#: kdevdesigner/designer/formwindow.cpp:1877
msgid "Lower"
msgstr "Senk"
#: kdevdesigner/designer/formwindow.cpp:1936
#: kdevdesigner/designer/formwindow.cpp:1953
#: kdevdesigner/designer/mainwindowactions.cpp:185
msgid "Check Accelerators"
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:1937
msgid ""
"_n: Accelerator '%1' is used once.\n"
"Accelerator '%1' is used %n times."
msgstr ""
"Hurtigtast «%1» er brukt en gang.\n"
"Hurtigtast «%1» er brukt %n ganger."
#: kdevdesigner/designer/formwindow.cpp:1939
msgid "&Select"
msgstr "&Velg"
#: kdevdesigner/designer/formwindow.cpp:1954
msgid "No accelerator is used more than once."
msgstr "Ingen akselerator er brukt mer enn en gang."
#: kdevdesigner/designer/formwindow.cpp:1964
msgid "Raise"
msgstr "Hev"
#: kdevdesigner/designer/formwindow.cpp:2002
#: kdevdesigner/designer/mainwindowactions.cpp:333
#, fuzzy
msgid "Lay Out Horizontally"
msgstr "Legg ut &vannrett"
#: kdevdesigner/designer/formwindow.cpp:2012
#: kdevdesigner/designer/mainwindowactions.cpp:340
#, fuzzy
msgid "Lay Out Vertically"
msgstr "Legg ut &loddrett"
#: kdevdesigner/designer/formwindow.cpp:2022
#, fuzzy
msgid "Lay Out Horizontally (in splitter)"
msgstr "Legg ut vannrett (i splitter)"
#: kdevdesigner/designer/formwindow.cpp:2032
#, fuzzy
msgid "Lay Out Vertically (in splitter)"
msgstr "Legg ut loddrett (i splitter)"
#: kdevdesigner/designer/formwindow.cpp:2045
#: kdevdesigner/designer/mainwindowactions.cpp:347
msgid "Lay Out in a Grid"
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:2066
#, fuzzy
msgid "Lay Out Children Horizontally"
msgstr "Legg ut undervinduer vannrett"
#: kdevdesigner/designer/formwindow.cpp:2087
#, fuzzy
msgid "Lay Out Children Vertically"
msgstr "Legg ut undervinduer loddrett"
#: kdevdesigner/designer/formwindow.cpp:2111
msgid "Lay Out Children in a Grid"
msgstr "Legg ut undervinduer i rutenett"
#: kdevdesigner/designer/formwindow.cpp:2143
#: kdevdesigner/designer/formwindow.cpp:2163
#: kdevdesigner/designer/mainwindowactions.cpp:368
msgid "Break Layout"
msgstr ""
#: kdevdesigner/designer/formwindow.cpp:2223
msgid "Edit connections..."
msgstr "Rediger tilkoblinger …"
#: kdevdesigner/designer/actionlistview.cpp:95
msgid "&Connect Action..."
msgstr ""
#: kdevdesigner/designer/actionlistview.cpp:97
msgid "Delete Action"
msgstr "Slett handling"
#: kdevdesigner/designer/mainwindow.cpp:205
msgid ""
"Ready - This is the non-commercial version of TQt - For commercial evaluations, "
"use the help menu to register with Trolltech."
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:224
#: kdevdesigner/designer/mainwindowactions.cpp:376
msgid "Layout"
msgstr "Utseende"
#: kdevdesigner/designer/mainwindow.cpp:361
#: kdevdesigner/designer/mainwindow.cpp:3747
msgid "Property Editor/Signal Handlers"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:363
msgid ""
"<b>The Property Editor</b>"
"<p>You can change the appearance and behavior of the selected widget in the "
"property editor.</p>"
"<p>You can set properties for components and forms at design time and see the "
"immediately see the effects of the changes. Each property has its own editor "
"which (depending on the property) can be used to enter new values, open a "
"special dialog, or to select values from a predefined list. Click <b>F1</b> "
"to get detailed help for the selected property.</p>"
"<p>You can resize the columns of the editor by dragging the separators in the "
"list's header.</p>"
"<p><b>Signal Handlers</b></p>"
"<p>In the Signal Handlers tab you can define connections between the signals "
"emitted by widgets and the slots in the form. (These connections can also be "
"made using the connection tool.)"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:390
msgid "Output Window"
msgstr "Resultatvindu"
#: kdevdesigner/designer/mainwindow.cpp:404
msgid "Object Explorer"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:407
msgid ""
"<b>The Object Explorer</b>"
"<p>The Object Explorer provides an overview of the relationships between the "
"widgets in a form. You can use the clipboard functions using a context menu for "
"each item in the view. It is also useful for selecting widgets in forms that "
"have complex layouts.</p>"
"<p>The columns can be resized by dragging the separator in the list's "
"header.</p>"
"<p>The second tab shows all the form's slots, class variables, includes, "
"etc.</p>"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:424
msgid "Start typing the buffer you want to switch to here (ALT+B)"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:433
msgid "Project Overview"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:434
msgid ""
"<b>The Project Overview Window</b>"
"<p>The Project Overview Window displays all the current project, including "
"forms and source files.</p>"
"<p>Use the search field to rapidly switch between files.</p>"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:451
msgid "Action Editor"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:452
msgid ""
"<b>The Action Editor</b>"
"<p>The Action Editor is used to add actions and action groups to a form, and to "
"connect actions to slots. Actions and action groups can be dragged into menus "
"and into toolbars, and may feature keyboard shortcuts and tooltips. If actions "
"have pixmaps these are displayed on toolbar buttons and besides their names in "
"menus.</p>"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:472
msgid "Toolbox"
msgstr "Verktøyboks"
#: kdevdesigner/designer/mainwindow.cpp:1281
msgid ""
"<b>The Form Window</b>"
"<p>Use the various tools to add widgets or to change the layout and behavior of "
"the components in the form. Select one or multiple widgets to move them or lay "
"them out. If a single widget is chosen it can be resized using the resize "
"handles.</p>"
"<p>Changes in the <b>Property Editor</b> are visible at design time, and you "
"can preview the form in different styles.</p>"
"<p>You can change the grid resolution, or turn the grid off in the <b>"
"Preferences</b> dialog in the <b>Edit</b> menu."
"<p>You can have several forms open, and all open forms are listed in the <b>"
"Form List</b>."
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1336
msgid "Cannot create an invalid project."
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1487
#, c-format
msgid "&Undo: %1"
msgstr "&Angre: %1"
#: kdevdesigner/designer/mainwindow.cpp:1489
#: kdevdesigner/designer/mainwindowactions.cpp:127
msgid "&Undo: Not Available"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1491
#, c-format
msgid "&Redo: %1"
msgstr "&Gjør om: %1"
#: kdevdesigner/designer/mainwindow.cpp:1493
#: kdevdesigner/designer/mainwindowactions.cpp:133
msgid "&Redo: Not Available"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1580
msgid "Choose Pixmap..."
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1584
msgid "Edit Text..."
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1588
msgid "Edit Title..."
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1592
#: kdevdesigner/designer/mainwindow.cpp:1702
msgid "Edit Page Title..."
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1623
#: kdevdesigner/designer/mainwindow.cpp:1637
#: kdevdesigner/designer/mainwindow.cpp:1646
#: kdevdesigner/designer/mainwindow.cpp:1661
#: kdevdesigner/designer/mainwindow.cpp:1695
#: kdevdesigner/designer/mainwindow.cpp:2469
msgid "Delete Page"
msgstr "Slett side"
#: kdevdesigner/designer/mainwindow.cpp:1626
#: kdevdesigner/designer/mainwindow.cpp:1640
#: kdevdesigner/designer/mainwindow.cpp:1649
#: kdevdesigner/designer/mainwindow.cpp:1664
#: kdevdesigner/designer/mainwindow.cpp:1699
#: kdevdesigner/designer/mainwindow.cpp:2468
msgid "Add Page"
msgstr "Legg til side"
#: kdevdesigner/designer/mainwindow.cpp:1632
msgid "Previous Page"
msgstr "Forrige side"
#: kdevdesigner/designer/mainwindow.cpp:1634
msgid "Next Page"
msgstr "Neste side"
#: kdevdesigner/designer/mainwindow.cpp:1667
msgid "Rename Current Page..."
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1705
msgid "Edit Pages..."
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1711
msgid "Add Menu Item"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1713
msgid "Add Toolbar"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1735
#: kdevdesigner/designer/mainwindow.cpp:2638
msgid "New text"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1740
#: kdevdesigner/designer/mainwindow.cpp:2643
msgid "Set 'wordwrap' of '%1'"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1749
#: kdevdesigner/designer/mainwindow.cpp:2652
msgid "Set the 'text' of '%1'"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1759
#: kdevdesigner/designer/mainwindow.cpp:2665
msgid "New title"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1762
#: kdevdesigner/designer/mainwindow.cpp:2667
msgid "Set the 'title' of '%2'"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1772
#: kdevdesigner/designer/mainwindow.cpp:1909
#: kdevdesigner/designer/mainwindow.cpp:1968
msgid "Page Title"
msgstr "Sidetittel"
#: kdevdesigner/designer/mainwindow.cpp:1772
#: kdevdesigner/designer/mainwindow.cpp:1909
#: kdevdesigner/designer/mainwindow.cpp:1968
msgid "New page title"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1775
msgid "Set the 'pageTitle' of '%2'"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1788
msgid "Set the 'pixmap' of '%2'"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1859
msgid "Raise next page of '%2'"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1869
msgid "Raise previous page of '%2'"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1916
msgid "Rename Page %1 to %2"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1983
msgid "Add Toolbar to '%1'"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:1989
msgid "Add Menu to '%1'"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:2515
#: kdevdesigner/designer/mainwindowactions.cpp:1127
msgid "Save Project Settings"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:2613
msgid "Edit %1..."
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:2709
msgid "Insert a %1 (custom widget)"
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:2710
#, fuzzy
msgid ""
"<b>%1 (custom widget)</b>"
"<p>Click <b>Edit Custom Widgets...</b> in the <b>Tools|Custom</b> "
"menu to add and change custom widgets. You can add properties as well as "
"signals and slots to integrate them into TQt Designer, and provide a pixmap "
"which will be used to represent the widget on the form.</p>"
msgstr ""
"<b>%1 (selvvalgt skjermelement)</b>"
"<p>Trykk <b>Rediger egne skjermelementer …</b> i menyen <b>Verktøy|Selvvalgt</b> "
"for å legge til og endre selvvalgte skjermelementer. Signaler og spalter og "
"andre egenskaper kan legges til for å integrere dem i Qt Designer, og oppgi et "
"pixmap-bilde som brukes til å representere elementet på skjemaet.</p>"
#: kdevdesigner/designer/mainwindow.cpp:2844
msgid "Restoring Last Session"
msgstr "Laster inn siste økt på nytt"
#: kdevdesigner/designer/mainwindow.cpp:2845
#, fuzzy
msgid ""
"TQt Designer found some temporary saved files, which were\n"
"written when TQt Designer crashed last time. Do you want to\n"
"load these files?"
msgstr ""
"Qt Designer fant noen midlertidig lagrede filer, som ble \n"
"skrevet siste gang Qt Designer krasjet. Vil du laste inn\n"
"disse filene på nytt?"
#: kdevdesigner/designer/mainwindow.cpp:2909
msgid "There is no help available for this dialog at the moment."
msgstr "For tiden finnes det ingen hjelpetekst for denne dialogen."
#: kdevdesigner/designer/mainwindow.cpp:2968
#: kdevdesigner/designer/mainwindowactions.cpp:1762
#: kdevdesigner/designer/mainwindowactions.cpp:1785
msgid "Edit Source"
msgstr "Endre kilde"
#: kdevdesigner/designer/mainwindow.cpp:2969
#: kdevdesigner/designer/mainwindowactions.cpp:1763
#: kdevdesigner/designer/mainwindowactions.cpp:1786
msgid ""
"There is no plugin for editing %1 code installed.\n"
"Note: Plugins are not available in static TQt configurations."
msgstr ""
#: kdevdesigner/designer/mainwindow.cpp:3069
msgid "Open File"
msgstr "Åpne fil"
#: kdevdesigner/designer/mainwindow.cpp:3070
#: kdevdesigner/designer/mainwindow.cpp:3086
msgid "Could not open '%1'. File does not exist."
msgstr "Kunne ikke åpne «%1». Fila finnes ikke."
#: kdevdesigner/designer/mainwindow.cpp:3085 src/projectmanager.cpp:135
msgid "Open Project"
msgstr "Åpne prosjekt"
#: kdevdesigner/designer/mainwindow.cpp:3735
#: kdevdesigner/designer/mainwindowactions.cpp:855
msgid "&Preview"
msgstr "&Forhåndsvisning"
#: kdevdesigner/designer/resource.cpp:1787
msgid "Loading File"
msgstr ""
#: kdevdesigner/designer/resource.cpp:1788
msgid ""
"Error loading %1.\n"
"The widget %2 could not be created."
msgstr ""
#: kdevdesigner/designer/sizehandle.cpp:235
msgid "Resize"
msgstr "Endre størrelse"
#: kdevdesigner/designer/newformimpl.cpp:160
msgid "Load Template"
msgstr "Last inn mal"
#: kdevdesigner/designer/newformimpl.cpp:161
msgid "Could not load form description from template '%1'"
msgstr ""
#: kdevdesigner/designer/newformimpl.cpp:252
msgid "%1 Project"
msgstr ""
#: kdevdesigner/designer/newformimpl.cpp:260
msgid "Dialog"
msgstr "Dialog"
#: kdevdesigner/designer/newformimpl.cpp:267
msgid "Wizard"
msgstr "Veiviser"
#: kdevdesigner/designer/newformimpl.cpp:272
msgid "Widget"
msgstr "widget / skjermelement"
#: kdevdesigner/designer/newformimpl.cpp:277
msgid "Main Window"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:128
msgid "Undoes the last action"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:134
msgid "Redoes the last undone operation"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:139
msgid "Cu&t"
msgstr "Kli&pp"
#: kdevdesigner/designer/mainwindowactions.cpp:140
msgid "Cuts the selected widgets and puts them on the clipboard"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:146
msgid "Copies the selected widgets to the clipboard"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:152
msgid "Pastes the clipboard's contents"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:158
msgid "Deletes the selected widgets"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:167
msgid "Select &All"
msgstr "Velg &alt"
#: kdevdesigner/designer/mainwindowactions.cpp:168
msgid "Selects all widgets"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:173
msgid "Bring to Front"
msgstr "Flytt forrest"
#: kdevdesigner/designer/mainwindowactions.cpp:173
msgid "Bring to &Front"
msgstr "Flytt helt &fram"
#: kdevdesigner/designer/mainwindowactions.cpp:174
#: kdevdesigner/designer/mainwindowactions.cpp:175
msgid "Raises the selected widgets"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:179
msgid "Send to Back"
msgstr "Flytt bakerst"
#: kdevdesigner/designer/mainwindowactions.cpp:179
msgid "Send to &Back"
msgstr "Flytt lengst &bak"
#: kdevdesigner/designer/mainwindowactions.cpp:180
#: kdevdesigner/designer/mainwindowactions.cpp:181
msgid "Lowers the selected widgets"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:187
msgid "Checks if the accelerators used in the form are unique"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:194
msgid "Opens a dialog for editing slots"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:199
msgid "Connections"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:201
msgid "Opens a dialog for editing connections"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:207
msgid "&Source..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:208
msgid "Opens an editor to edit the form's source code"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:215
msgid "Opens a dialog to change the form's settings"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:221
msgid "Preferences..."
msgstr "innstillinger …"
#: kdevdesigner/designer/mainwindowactions.cpp:222
msgid "Opens a dialog to change preferences"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:271
msgid "Find"
msgstr "Finn"
#: kdevdesigner/designer/mainwindowactions.cpp:277
msgid "Find Incremental"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:278
msgid "Find &Incremental"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:290
msgid "&Goto Line..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:302
msgid "Incremental search (Alt+I)"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:328
msgid "Adjusts the size of the selected widget"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:335
msgid "Lays out the selected widgets horizontally"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:342
msgid "Lays out the selected widgets vertically"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:348
msgid "Lay Out in a &Grid"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:349
msgid "Lays out the selected widgets in a grid"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:354
#, fuzzy
msgid "Lay Out Horizontally (in Splitter)"
msgstr "Legg ut vannrett (i S&plitter)"
#: kdevdesigner/designer/mainwindowactions.cpp:356
msgid "Lays out the selected widgets horizontally in a splitter"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:361
#, fuzzy
msgid "Lay Out Vertically (in Splitter)"
msgstr "Legg ut loddrett (i Sp&litter)"
#: kdevdesigner/designer/mainwindowactions.cpp:363
msgid "Lays out the selected widgets vertically in a splitter"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:370
msgid "Breaks the selected layout"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:379
#, c-format
msgid "Add %1"
msgstr "Legg til %1"
#: kdevdesigner/designer/mainwindowactions.cpp:382
#: kdevdesigner/designer/mainwindowactions.cpp:555
#, c-format
msgid "Insert a %1"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:383
msgid ""
"<b>A %1</b>"
"<p>%2</p>"
"<p>Click to insert a single %3,or double click to keep the tool selected."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:395
#, c-format
msgid "<b>The Layout toolbar</b>%1"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:431
msgid "Pointer"
msgstr "Peker"
#: kdevdesigner/designer/mainwindowactions.cpp:435
msgid "Selects the pointer tool"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:438
msgid "Connect Signal/Slots"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:444
msgid "Selects the connection tool"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:447
msgid "Tab Order"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:451
msgid "Selects the tab order tool"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:454
msgid "Set Buddy"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:458
msgid "Sets a buddy to a label"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:464
#, c-format
msgid "<b>The Tools toolbar</b>%1"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:466
msgid "Tools"
msgstr "Verktøy"
#: kdevdesigner/designer/mainwindowactions.cpp:488
msgid "Custom Widgets"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:491
msgid "Opens a dialog to add and change custom widgets"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:508
msgid "<b>The %1</b>%2"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:509
#, c-format
msgid ""
" Click on a button to insert a single widget, or double click to insert "
"multiple %1."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:512
msgid "<b>The %1 Widgets</b>%2"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:513
msgid ""
" Click on a button to insert a single %1 widget, or double click to insert "
"multiple widgets."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:557
msgid "<b>A %1</b>"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:560
msgid "<p>Double click on this tool to keep it selected.</p>"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:579
msgid ""
"<b>The Custom Widgets toolbar</b>%1"
"<p>Click <b>Edit Custom Widgets...</b>in the <b>Tools|Custom</b> "
"menu to add and change custom widgets</p>"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:584
msgid ""
" Click on the buttons to insert a single widget, or double click to insert "
"multiple widgets."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:606
msgid "Opens a dialog to configure the common widgets page of the toolbox"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:620
#, c-format
msgid "<b>The File toolbar</b>%1"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:630
msgid "New dialog or file"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:631
#: kdevdesigner/designer/mainwindowactions.cpp:645
msgid "&New..."
msgstr "&Ny …"
#: kdevdesigner/designer/mainwindowactions.cpp:634
msgid "Creates a new project, form or source file."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:647
msgid "Creates a new dialog or file"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:651
msgid "New Dialog"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:652
msgid "&Dialog..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:655
msgid "Creates a new dialog."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:660
msgid "&File..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:663
msgid "Creates a new file."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:678
msgid "Opens an existing project, form or source file "
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:692
msgid "Closes the current project or document"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:707
msgid "Saves the current project or document"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:717
msgid "Save &As..."
msgstr "Lagre &som …"
#: kdevdesigner/designer/mainwindowactions.cpp:718
msgid "Saves the current form with a new filename"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:727
msgid "Save All"
msgstr "Lagre alle"
#: kdevdesigner/designer/mainwindowactions.cpp:728
msgid "Sa&ve All"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:729
msgid "Saves all open documents"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:741
msgid "Creates a new template"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:754
msgid "Recently Opened Files "
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:755
msgid "Recently Opened Projects"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:773
msgid "Exit"
msgstr "Avslutt"
#: kdevdesigner/designer/mainwindowactions.cpp:775
msgid ""
"Quits the application and prompts to save any changed forms, source files or "
"project settings"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:788
msgid "Pr&oject"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:791
#: kdevdesigner/designer/mainwindowactions.cpp:792
msgid "Active Project"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:808
msgid "Add File"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:810
msgid "Adds a file to the current project"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:818
msgid "Image Collection..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:820
msgid "Opens a dialog for editing the current project's image collection"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:828
msgid "Database Connections..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:830
msgid "Opens a dialog for editing the current project's database connections"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:839
msgid "Project Settings..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:840
msgid "&Project Settings..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:841
msgid "Opens a dialog to change the project's settings"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:857
msgid "Preview Form"
msgstr "Skjema for forhåndsvisning"
#: kdevdesigner/designer/mainwindowactions.cpp:860
msgid "Opens a preview"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:874
msgid ""
"The preview will use the Motif look and feel which is used as the default style "
"on most UNIX systems."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:876
msgid "The preview will use the Windows look and feel."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:878
msgid ""
"The preview will use the Platinum look and feel which is similar to the "
"Macintosh GUI style."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:880
msgid ""
"The preview will use the CDE look and feel which is similar to some versions of "
"the Common Desktop Environment."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:882
msgid ""
"The preview will use the Motif look and feel which is used as the default style "
"on SGI systems."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:884
msgid ""
"The preview will use the advanced Motif look and feel used by the GIMP toolkit "
"(GTK) on Linux."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:886
msgid "Preview Form in %1 Style"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:887
msgid "... in %1 Style"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:888
msgid "Opens a preview in %1 style"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:889
msgid ""
"<b>Open a preview in %1 style.</b>"
"<p>Use the preview to test the design and signal-slot connections of the "
"current form. %2</p>"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:905
msgid "Tile"
msgstr "Fliser"
#: kdevdesigner/designer/mainwindowactions.cpp:905
msgid "&Tile"
msgstr "&flislagt"
#: kdevdesigner/designer/mainwindowactions.cpp:906
msgid "Tiles the windows so that they are all visible"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:909
msgid "Cascade"
msgstr "Kortstokk"
#: kdevdesigner/designer/mainwindowactions.cpp:909
msgid "&Cascade"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:910
msgid "Cascades the windows so that all their title bars are visible"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:914
msgid "Cl&ose"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:915
msgid "Closes the active window"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:919 src/partcontroller.cpp:152
msgid "Close All"
msgstr "Lukk alle"
#: kdevdesigner/designer/mainwindowactions.cpp:919
msgid "Close Al&l"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:920
msgid "Closes all form windows"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:924
msgid "Next"
msgstr "Neste"
#: kdevdesigner/designer/mainwindowactions.cpp:924
msgid "Ne&xt"
msgstr "N&este"
#: kdevdesigner/designer/mainwindowactions.cpp:925
msgid "Activates the next window"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:929
msgid "Previous"
msgstr "Forrige"
#: kdevdesigner/designer/mainwindowactions.cpp:929
msgid "Pre&vious"
msgstr "&Forrige"
#: kdevdesigner/designer/mainwindowactions.cpp:930
msgid "Activates the previous window"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:953
msgid "Vie&ws"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:954
msgid "Tool&bars"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:983
msgid "Opens the online help"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:987
msgid "&Manual"
msgstr "&Manuell"
#: kdevdesigner/designer/mainwindowactions.cpp:988
#, fuzzy
msgid "Opens the TQt Designer manual"
msgstr "Bruk Qt Designer eksternt"
#: kdevdesigner/designer/mainwindowactions.cpp:993
msgid "Displays information about TQt Designer"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:997
#, fuzzy
msgid "About TQt"
msgstr "Om Qt"
#: kdevdesigner/designer/mainwindowactions.cpp:997
#, fuzzy
msgid "About &TQt"
msgstr "Om Qt"
#: kdevdesigner/designer/mainwindowactions.cpp:998
#, fuzzy
msgid "Displays information about the TQt Toolkit"
msgstr "Nyttig informasjon om %{APPNAMELC}-modulen."
#: kdevdesigner/designer/mainwindowactions.cpp:1004
#, fuzzy
msgid "Register TQt"
msgstr "Registre"
#: kdevdesigner/designer/mainwindowactions.cpp:1004
#, fuzzy
msgid "&Register TQt..."
msgstr "&Registre"
#: kdevdesigner/designer/mainwindowactions.cpp:1005
msgid "Opens a web browser at the evaluation form on www.trolltech.com"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1006
msgid "Register with Trolltech"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1010
#: kdevdesigner/designer/mainwindowactions.cpp:1011
msgid "What's This?"
msgstr "Hva er dette?"
#: kdevdesigner/designer/mainwindowactions.cpp:1012
msgid "\"What's This?\" context sensitive help"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1041
msgid "Create a new project, form or source file..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1075
msgid "Name of File"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1075
msgid "Enter the name of the new source file:"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1169
msgid "Selected project '%1'"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1199
msgid "Open a file..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1211
msgid "*.ui *.pro|Designer Files"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1214
#, fuzzy
msgid "*.pro|TQMAKE Project Files"
msgstr ""
"*.pro|Prosjektfiler\n"
"*|Alle filer"
#: kdevdesigner/designer/mainwindowactions.cpp:1275
msgid "No import filter is available to import '%1'"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1279
msgid "Importing '%1' using import filter ..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1283
msgid "Nothing to load in '%1'"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1322
msgid "Reading file '%1'..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1341
msgid "Loaded file '%1'"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1343
msgid "Failed to load file '%1'"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1344
msgid "Load File"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1344
msgid "Could not load file '%1'."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1392
msgid "Project '%1' saved."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1398
msgid "Enter a filename..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1439
#: kdevdesigner/designer/mainwindowactions.cpp:1494
msgid "NewTemplate"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1451
#: kdevdesigner/designer/mainwindowactions.cpp:1472
msgid "Could not create the template."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1568
msgid "Paste Error"
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1569
msgid ""
"Cannot paste widgets. Designer could not find a container\n"
"to paste into which does not contain a layout. Break the layout\n"
"of the container you want to paste into and select this container\n"
"and then paste again."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1730
msgid "Edit the current form's slots..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1741
msgid "Edit the current form's connections..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1841
msgid "Edit the current form's settings..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:1870
msgid "Edit preferences..."
msgstr ""
#: kdevdesigner/designer/mainwindowactions.cpp:2038
msgid "Edit custom widgets..."
msgstr ""
#: kdevdesigner/designer/command.cpp:528 kdevdesigner/designer/command.cpp:540
msgid "Set 'name' Property"
msgstr ""
#: kdevdesigner/designer/command.cpp:529
msgid ""
"The name of a widget must be unique.\n"
"'%1' is already used in form '%2',\n"
"so the name has been reverted to '%3'."
msgstr ""
#: kdevdesigner/designer/command.cpp:541
msgid ""
"The name of a widget must not be null.\n"
"The name has been reverted to '%1'."
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:99
msgid "&Styles"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:121
msgid "Typewriter"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:134
msgid "Break"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:139
msgid "Paragraph"
msgstr "Avsnitt"
#: kdevdesigner/designer/multilineeditorimpl.cpp:147
msgid "Align left"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:153
msgid "Align center"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:159
msgid "Align right"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:165
msgid "Blockquote"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:173
msgid "&Font"
msgstr "&Skrifttype"
#: kdevdesigner/designer/multilineeditorimpl.cpp:185
msgid "Fontsize +1"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:190
msgid "Fontsize -1"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:195
msgid "Headline 1"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:200
msgid "Headline 2"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:205
msgid "Headline 3"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:211
msgid "O&ptions"
msgstr "&Valg"
#: kdevdesigner/designer/multilineeditorimpl.cpp:217
msgid "Word Wrapping"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:279
msgid "Set the Text of '%1'"
msgstr ""
#: kdevdesigner/designer/multilineeditorimpl.cpp:285
msgid "Set 'wordWrap' of '%2'"
msgstr ""
#: kdevdesigner/designer/popupmenueditor.cpp:303
msgid "new item"
msgstr ""
#: kdevdesigner/designer/popupmenueditor.cpp:438
msgid "Cut Item"
msgstr "Klipp ut oppføring"
#: kdevdesigner/designer/popupmenueditor.cpp:466
msgid "Paste Item"
msgstr ""
#: kdevdesigner/designer/popupmenueditor.cpp:508
msgid "Set Icon"
msgstr "Angi ikon"
#: kdevdesigner/designer/popupmenueditor.cpp:631
msgid "Add Item"
msgstr ""
#: kdevdesigner/designer/popupmenueditor.cpp:641
msgid "Remove Item"
msgstr "Fjern element"
#: kdevdesigner/designer/popupmenueditor.cpp:769
#: kdevdesigner/designer/popupmenueditor.cpp:1428
msgid "Rename Item"
msgstr "Endre navn på element"
#: kdevdesigner/designer/popupmenueditor.cpp:1233
msgid "Drop Item"
msgstr ""
#: kdevdesigner/designer/popupmenueditor.cpp:1287
msgid "Remove Icon"
msgstr ""
#: kdevdesigner/designer/popupmenueditor.cpp:1308
msgid "Move Item Up"
msgstr ""
#: kdevdesigner/designer/popupmenueditor.cpp:1332
msgid "Move Item Down"
msgstr ""
#: kdevdesigner/designer/project.cpp:149
msgid ""
"Could not connect to the database.\n"
"Press 'OK' to continue or 'Cancel' to specify different\n"
"connection information.\n"
msgstr ""
#: src/simplemainwindow.cpp:99
msgid "TDevelop &Programming Handbook"
msgstr ""
#: src/simplemainwindow.cpp:109
#, fuzzy
msgid ""
"Unable to find plugins, TDevelop will not work properly.\n"
"Please make sure that TDevelop is installed in your TDE directory; otherwise, "
"you have to add TDevelop's installation path to the environment variable "
"TDEDIRS and run tdebuildsycoca. Restart TDevelop afterwards.\n"
"Example for BASH users:\n"
"export TDEDIRS=/path/to/tdevelop:$TDEDIRS && tdebuildsycoca"
msgstr ""
"Kan ikke finne programtillegg, KDevelop kan ikke virke ordentlig.\n"
"Se etter at KDevelop er installert i TDE-mappa, ellers må KDevelops "
"installasjonssti legges til miljøvariabelen TDEDIRS og tdebuildsycoca kjøres. "
"Start KDevelop på nytt etterpå.\n"
"Eksempel for BASH-brukere:\n"
"export TDEDIRS=/path/to/tdevelop:$TDEDIRS && tdebuildsycoca"
#: src/simplemainwindow.cpp:116
msgid "Could Not Find Plugins"
msgstr "Kunne ikke finne tilleggsmodulene"
#: src/simplemainwindow.cpp:422
msgid "Raise &Editor"
msgstr "Hev r&edigeringen"
#: src/simplemainwindow.cpp:424
msgid "Raise editor"
msgstr "Hev redigeringen"
#: src/simplemainwindow.cpp:425
msgid "<b>Raise editor</b><p>Focuses the editor."
msgstr "<b>Hev redigeringen</b><p>Gir fokus til redigeringen."
#: src/simplemainwindow.cpp:427
#, fuzzy
msgid "Lower All Docks"
msgstr "Verktøy&paletter"
#: src/simplemainwindow.cpp:430
msgid "Switch to next TabWidget"
msgstr ""
#: src/simplemainwindow.cpp:433 src/simplemainwindow.cpp:441
msgid "Split &Horizontal"
msgstr "Del &vannrett"
#: src/simplemainwindow.cpp:437 src/simplemainwindow.cpp:445
msgid "Split &Vertical"
msgstr "Del &loddrett"
#: src/simplemainwindow.cpp:449
#, fuzzy
msgid "Split &Horizontal and Open"
msgstr "Del &vannrett"
#: src/simplemainwindow.cpp:453
#, fuzzy
msgid "Split &Vertical and Open"
msgstr "Del &loddrett"
#: src/simplemainwindow.cpp:457
msgid "Switch Left Dock"
msgstr "Bytt venstre palett"
#: src/simplemainwindow.cpp:460
msgid "Switch Right Dock"
msgstr "Bytt høyre palett"
#: src/simplemainwindow.cpp:463
msgid "Switch Bottom Dock"
msgstr "Bytt bunnpalett"
#: src/partcontroller.cpp:157 src/simplemainwindow.cpp:622
msgid "Close All Others"
msgstr "Lukk alle andre"
#: src/simplemainwindow.cpp:632
msgid "Duplicate"
msgstr "Lag kopi"
#: src/splashscreen.cpp:77
#, c-format
msgid "Version %1"
msgstr "Versjon %1"
#: src/plugincontroller.cpp:150
#, c-format
msgid "Loading: %1"
msgstr "Åpner: %1"
#: src/plugincontroller.cpp:219
msgid ""
"<b>Could not load plugin</b>"
"<br>Plugin %1 could not be loaded"
"<br>Library loader error: %2"
msgstr ""
#: src/plugincontroller.cpp:223
#, fuzzy
msgid "Could not load plugin"
msgstr "Kunne ikke finne tilleggsmodulene"
#: src/partcontroller.cpp:130
msgid "Open file"
msgstr "Åpne fil"
#: src/partcontroller.cpp:131
msgid ""
"<b>Open file</b>"
"<p>Opens an existing file without adding it to the project.</p>"
msgstr ""
"<b>Åpne fil</b> "
"<p>Åpner en eksisterende fil uten å legge den til i prosjektet.</p>"
#: src/partcontroller.cpp:134
msgid "Opens recently opened file."
msgstr "Åpner nylig åpnet fil."
#: src/partcontroller.cpp:138
msgid "Save all modified files"
msgstr "Lagre alle endrede filer"
#: src/partcontroller.cpp:139
msgid "<b>Save all</b><p>Saves all modified files."
msgstr "<b>Lagre alt</b><p>Lagrer alle endrede file."
#: src/partcontroller.cpp:142
msgid "Rever&t All"
msgstr "&Tilbakestill alt"
#: src/partcontroller.cpp:143
msgid "Revert all changes"
msgstr "Tilbakestill alle endringer"
#: src/partcontroller.cpp:144
msgid ""
"<b>Revert all</b>"
"<p>Reverts all changes in opened files. Prompts to save changes so the "
"reversion can be canceled for each modified file."
msgstr ""
"<b>Tilbakestill alt</b> "
"<p>Tilbakestiller alle endringer i åpnede filer. Spør om endringer skal lagres "
"slik at tilbakestilling kan avbrytes for hver endrede fil."
#: src/partcontroller.cpp:148
msgid "Close current file"
msgstr "Lukk gjeldende fil"
#: src/partcontroller.cpp:149
msgid "Closes current file."
msgstr "Lukker den gjeldende fila."
#: src/partcontroller.cpp:153
msgid "Close all files"
msgstr "Lukk alle filer"
#: src/partcontroller.cpp:154
msgid "<b>Close all</b><p>Close all opened files."
msgstr "<b >Lukk alle</b><p>Lukk alle åpnede filer."
#: src/partcontroller.cpp:158
msgid "Close other files"
msgstr "Lukk andre filer"
#: src/partcontroller.cpp:159
msgid "<b>Close all others</b><p>Close all opened files except current."
msgstr "<b>Lukk alle andre</b><p>Lukk alle åpnede filer unntatt den gjeldende."
#: src/partcontroller.cpp:167
msgid "<b>Back</b><p>Moves backwards one step in the navigation history."
msgstr "<b>Tilbake</b><p>Går ett steg tilbake i navigasjonshistorien."
#: src/partcontroller.cpp:174
msgid "<b>Forward</b><p>Moves forward one step in the navigation history."
msgstr "<b>Fram</b><p>Går ett steg framover i navigasjonshistorien."
#: src/partcontroller.cpp:178 src/partcontroller.cpp:180
msgid "Goto Last Edit Position"
msgstr ""
#: src/partcontroller.cpp:181
msgid ""
"<b>Goto Last Edit Position</b>"
"<p>Open the last edited file and position cursor at the point of edit"
msgstr ""
#: src/partcontroller.cpp:1008
msgid ""
"The file \"%1\" is modified in memory. Are you sure you want to reload it? "
"(Local changes will be lost.)"
msgstr ""
"Fila «%1» er endret i minnet. Er du sikker på at du vil laste den inn på nytt? "
"(Lokale endringer går tapt.)"
#: src/partcontroller.cpp:1009
msgid "File is Modified"
msgstr "Fila er endret"
#: src/partcontroller.cpp:1123
msgid ""
"The file \"%1\" is modified on disk.\n"
"\n"
"Are you sure you want to overwrite it? (External changes will be lost.)"
msgstr ""
"Fila «%1» er endret på disk.\n"
"\n"
"Er du sikker på at du vil overskrive den? (Ytre endringer vil gå tapt.)"
#: src/partcontroller.cpp:1124
msgid "File Externally Modified"
msgstr "Fil endret utenfra"
#: src/partcontroller.cpp:1124
msgid "Do Not Overwrite"
msgstr "Ikke overskriv"
#: src/partcontroller.cpp:1483
msgid ""
"Conflict: The file \"%1\" has changed on disk while being modified in memory.\n"
"\n"
"You should investigate before saving to make sure you are not losing data."
msgstr ""
"Konflikt: Fila «%1» er endret på disk mens den ble endret i minnet.\n"
"\n"
"Du bør undersøke før du lagrer for å være sikker på at du ikke mister data."
#: src/partcontroller.cpp:1485
msgid "Conflict"
msgstr "Konflikt"
#: src/partcontroller.cpp:1492
msgid ""
"Warning: The file \"%1\" has been deleted on disk.\n"
"\n"
"If this was not your intention, make sure to save this file now."
msgstr ""
"Advarsel: Fila «%1» er blitt slettet på disk.\n"
"\n"
"Hvis dette ikke var hensikten, så pass på å lagre denne fila nå."
#: src/partcontroller.cpp:1494
msgid "File Deleted"
msgstr "Fil slettet"
#: src/partcontroller.cpp:1501
msgid ""
"The file \"%1\" has changed on disk.\n"
"\n"
"Do you want to reload it?"
msgstr ""
"Fila «%1» er endret på disk.\n"
"\n"
"Vil du laste den inn på nytt?"
#: src/partcontroller.cpp:1502
msgid "File Changed"
msgstr "Fil endret"
#: src/partcontroller.cpp:1801 src/partcontroller.cpp:1822
msgid "unnamed"
msgstr "uten navn"
#: src/projectmanager.cpp:96
msgid "&Open Project..."
msgstr "Åpne &prosjekt …"
#: src/projectmanager.cpp:99
msgid "Open project"
msgstr "Åpne prosjekt"
#: src/projectmanager.cpp:100
msgid "<b>Open project</b><p>Opens a KDevelop3 or KDevelop2 project."
msgstr "<b>Åpne prosjekt</b><p>Åpner et KDevelop3 eller KDevelop2-prosjekt."
#: src/projectmanager.cpp:103
msgid "Open &Recent Project"
msgstr "Åpne nylig p&rosjekt"
#: src/projectmanager.cpp:106
msgid "Open recent project"
msgstr "Åpne nylig brukt prosjekt"
#: src/projectmanager.cpp:107
msgid "<b>Open recent project</b><p>Opens recently opened project."
msgstr ""
"<b>Åpne nylig brukt prosjekt</b>"
"<p>Åpner et prosjekt som nylig har vært åpnet."
#: src/projectmanager.cpp:111
msgid "C&lose Project"
msgstr "&Lukk prosjekt"
#: src/projectmanager.cpp:115
msgid "Close project"
msgstr "Lukk prosjekt"
#: src/projectmanager.cpp:116
msgid "<b>Close project</b><p>Closes the current project."
msgstr "<b>Lukk prosjekt</b><p>Lukker det gjeldende prosjektet."
#: src/projectmanager.cpp:118
msgid "Project &Options"
msgstr "Prosjekt&innstillinger"
#: src/projectmanager.cpp:121
msgid "Project options"
msgstr "Prosjektinnstillinger"
#: src/projectmanager.cpp:122
msgid "<b>Project options</b><p>Lets you customize project options."
msgstr ""
"<b>Prosjektinnstillinger</b>"
"<p>Brukes til å sette opp prosjektets innstillinger."
#: src/projectmanager.cpp:133
msgid ""
"*.tdevelop|KDevelop 3 Project Files\n"
"*.kdevprj|KDevelop 2 Project Files"
msgstr ""
"*.tdevelop|KDevelop 3 prosjektfiler\n"
"*.kdevprj|KDevelop 2 prosjektfiler"
#: src/projectmanager.cpp:224
msgid "Are you sure you want to reopen the current project?"
msgstr "Er du sikker på at du vil gjenåpne det gjeldende prosjektet?"
#: src/projectmanager.cpp:224
msgid "Reopen"
msgstr "Gjenåpne"
#: src/projectmanager.cpp:224
msgid "Do Not Reopen"
msgstr "Ikke åpne på nytt"
#: src/projectmanager.cpp:278
msgid "Changing plugin profile..."
msgstr "Endrer profil for tilleggsmoduler …"
#: src/projectmanager.cpp:281
msgid "Loading project plugins..."
msgstr "Laster inn prosjektets tilleggsmoduler …"
#: src/projectmanager.cpp:290
#, fuzzy
msgid "error during restoring of the TDevelop session !"
msgstr "feil ved gjenåpning av KDevelop-økta!"
#: src/projectmanager.cpp:306
msgid "Project loaded."
msgstr "Prosjektet lastet inn."
#: src/projectmanager.cpp:358 src/projectmanager.cpp:366
#, c-format
msgid "Could not read project file: %1"
msgstr "Klarte ikke lese prosjektfil: %1"
#: src/projectmanager.cpp:385
msgid "This is not a valid project file."
msgstr "Dette er ikke en gyldig prosjektfil."
#: src/projectmanager.cpp:406 src/projectmanager.cpp:417
msgid "Could not write the project file."
msgstr "Klarte ikke skrive prosjektfila."
#: src/projectmanager.cpp:488
msgid "No project management plugin %1 found."
msgstr "Fant ingen tilleggsmodul %1 for prosjektstyring."
#: src/projectmanager.cpp:498
#, c-format
msgid "Could not create project management plugin %1."
msgstr "Klarte ikke opprette tilleggsmodul %1 for prosjektstyring."
#: src/projectmanager.cpp:544
msgid "No language plugin for %1 found."
msgstr "Fant ingen tilleggsmodul for %1."
#: src/projectmanager.cpp:558
#, c-format
msgid "Could not create language plugin for %1."
msgstr "Klarte ikke opprette språkmodul for %1."
#: src/projectmanager.cpp:617
msgid "Invalid URL."
msgstr "Ugyldig URL."
#: src/projectmanager.cpp:623
msgid "You do not have 'kdevprj2tdevelop' installed."
msgstr "Du har ikke «kdevprj2tdevelop» installert."
#: src/generalinfowidget.cpp:58
#, fuzzy
msgid "Use global editor settings"
msgstr "Sett opp innstillinger for redigeringen"
#: src/generalinfowidget.cpp:95
#, fuzzy
msgid "Could not open %1 for reading."
msgstr "Klarte ikke åpne fil for skriving."
#: src/generalinfowidget.cpp:155
#, fuzzy
msgid "Could not open %1 for writing."
msgstr "Klarte ikke åpne fil for skriving."
#: src/generalinfowidget.cpp:186
msgid ""
"Could not find configure.in.in, configure.in or configure.ac to update the "
"project version."
msgstr ""
#: src/generalinfowidget.cpp:215
msgid "Please enter a path."
msgstr "Oppgi et stinavn."
#: src/generalinfowidget.cpp:220
msgid "'%1' is not an absolute path."
msgstr "«%1» er ikke en absolutt sti."
#: src/generalinfowidget.cpp:226
msgid "'%1' is not a relative path."
msgstr "«%1» er ikke en relativ sti."
#: src/generalinfowidget.cpp:234
msgid "'%1' does not exist."
msgstr "«%1» finnes ikke."
#: src/generalinfowidget.cpp:238
msgid "'%1' is not a directory."
msgstr "«%1» er ikke en mappe."
#: src/generalinfowidget.cpp:264 src/generalinfowidget.cpp:267
msgid "'%1' is a valid project directory."
msgstr "«%1» er en gyldig prosjektmappe."
#: src/main.cpp:25 src/main_assistant.cpp:25
msgid "Profile to load"
msgstr "Profil som skal lastes inn"
#: src/main.cpp:26
msgid "Files to load"
msgstr "Filer som skal lastes"
#: src/main.cpp:32
#, fuzzy
msgid "The TDevelop Integrated Development Environment"
msgstr "KDevelop integrert utviklingsmiljø"
#: src/main.cpp:33
#, fuzzy
msgid "TDevelop"
msgstr "KDevelop"
#: src/main.cpp:35 src/main_assistant.cpp:35
#, fuzzy
msgid "(c) 1999-2007, The KDevelop developers"
msgstr "© 19992005 KDevelop-utviklerne"
#: src/main.cpp:36 src/main_assistant.cpp:36
msgid ""
"Release coordinator, Overall improvements, Pascal support, C++ support, New "
"File and Documentation parts"
msgstr ""
"Utgaavekoordinator, forbedringer over det hele, støtte for Pascal og C++, Ny "
"Fil og dokumentasjonsdeler"
#: src/main.cpp:37 src/main_assistant.cpp:37
msgid "Release coordinator, API documentation, Doxygen and autoproject patches"
msgstr ""
"Utgavekoordinator, API-dokumentasjon, lapper for Doxygen og autoprosjekt"
#: src/main.cpp:38
msgid "Advanced C++ code completion, C++ support, overall improvements"
msgstr ""
#: src/main.cpp:39 src/main_assistant.cpp:38
msgid "Initial idea, basic architecture, much initial source code"
msgstr "Opprinnelig idé, grunnstruktur og mye kildekode fra starten"
#: src/main.cpp:40 src/main_assistant.cpp:39
msgid "KTabBar, bugfixes"
msgstr "KTabBar, feilfikser"
#: src/main.cpp:41 src/main_assistant.cpp:40
msgid "Java & Objective C support"
msgstr "Støtte for Java & Objective C"
#: src/main.cpp:42 src/main.cpp:43 src/main_assistant.cpp:41
msgid "Debugger frontend"
msgstr "Feilsøker brukerflate"
#: src/main.cpp:44 src/main_assistant.cpp:42
msgid "PHP support, context menu stuff"
msgstr "Støtte for PHP, kontekst-meny-biter"
#: src/main.cpp:45 src/main_assistant.cpp:43
msgid "TDE application templates"
msgstr "TDE programmaler"
#: src/main.cpp:46 src/main_assistant.cpp:44
msgid "Dist part, bash support, application templates"
msgstr "Dist-del, støtte for bash, programmaler"
#: src/main.cpp:47 src/main_assistant.cpp:45
msgid "Several components, htdig indexing"
msgstr "Flere komponenter, indeksering med htdig"
#: src/main.cpp:48 src/main_assistant.cpp:46
#, fuzzy
msgid "Help with Automake manager and persistent class store"
msgstr "Hjelp med Automake-håndtering og persistent klasselagring"
#: src/main.cpp:49
msgid ""
"Automake manager patches, Astyle plugin update, plugin patches and improvements"
msgstr ""
#: src/main.cpp:50 src/main_assistant.cpp:47
#, fuzzy
msgid "Ported to TQt 3, patches, valgrind, diff and perforce support"
msgstr "Portet til Qt 3, lapper, valgrind, støtte for diff og perforce"
#: src/main.cpp:51 src/main_assistant.cpp:48
#, fuzzy
msgid ""
"TQEditor component, code completion, Abbrev component, C++ support, Java "
"support"
msgstr ""
"QEditor-komponent, kodefullføring, Abbrev-komponent, C++ støtte, Java-støtte"
#: src/main.cpp:52 src/main_assistant.cpp:49
msgid "Help with KParts infrastructure"
msgstr "Hjelp med infrastrukturen i KParts"
#: src/main.cpp:53 src/main_assistant.cpp:50
msgid "Ada support"
msgstr "Ada-støtte"
#: src/main.cpp:54
#, fuzzy
msgid "TQMake projectmanager, TQt4 Support"
msgstr "QMake prosjekthåndtering"
#: src/main.cpp:55 src/main_assistant.cpp:51
#, fuzzy
msgid "TQMake projectmanager"
msgstr "QMake prosjekthåndtering"
#: src/main.cpp:56 src/main_assistant.cpp:52
#, fuzzy
msgid "MDI modes, TQEditor, bugfixes"
msgstr "MDI-moduser, QEditor, feilfikser"
#: src/main.cpp:57 src/main_assistant.cpp:53
msgid "PartExplorer, redesign of CvsPart, patches, bugs(fixes)"
msgstr "PartExplorer, ombygging av CvsPart, lapper, feil(fikser)"
#: src/main.cpp:58 src/main_assistant.cpp:54
msgid ""
"Replace, Bookmarks, FileList and CTags2 plugins. Overall improvements and "
"patches"
msgstr ""
"Erstatt, Bokmerker, Filliste og tilleggsmoduler for CTags2. Generelle "
"forbedringer og lapper"
#: src/main.cpp:59 src/main_assistant.cpp:55
msgid "Filecreate part and other bits and patches"
msgstr "Fillagingsdel og andre biter og lapper"
#: src/main.cpp:60 src/main_assistant.cpp:56
msgid "ClearCase support"
msgstr "ClearCase-støtte"
#: src/main.cpp:61 src/main_assistant.cpp:57
msgid "Ruby support"
msgstr "Ruby-støtte"
#: src/main.cpp:63 src/main_assistant.cpp:59
msgid "Kate editor component"
msgstr "Kate redigeringskomponent"
#: src/main.cpp:64 src/main_assistant.cpp:60
msgid "HTML documentation component"
msgstr "HTML dokumentasjonskomponent"
#: src/main.cpp:65 src/main_assistant.cpp:61
msgid "Fortran documentation"
msgstr "Fortran-dokumentasjon"
#: src/main.cpp:66 src/main_assistant.cpp:62
msgid "Python documentation utility"
msgstr "Verktøy for Python-dokumentasjon"
#: src/main.cpp:67 src/main_assistant.cpp:63
msgid "Doxygen wizard"
msgstr "Doxygen-veiviser"
#: src/main.cpp:68 src/main.cpp:69 src/main_assistant.cpp:64
#: src/main_assistant.cpp:65
msgid "Fileselector component"
msgstr "Filvelger-komponent"
#: src/main.cpp:70 src/main_assistant.cpp:66
msgid "Designer code"
msgstr "Designer-kode"
#: src/main.cpp:71 src/main_assistant.cpp:67
#, fuzzy
msgid "C++ code completion, persistent class store"
msgstr "C++ kodefullføring, persistent klasselagring"
#: src/main.cpp:72 src/main.cpp:73 src/main.cpp:76 src/main_assistant.cpp:68
#: src/main_assistant.cpp:69 src/main_assistant.cpp:72
msgid "Patches"
msgstr "Rettelser"
#: src/main.cpp:74 src/main_assistant.cpp:70
msgid "Help with Perl support"
msgstr "Hjelp med Perl-støtte"
#: src/main.cpp:75 src/main_assistant.cpp:71
msgid "Documentation index view"
msgstr "Indeksvisning for dokumentasjon"
#: src/main.cpp:77 src/main_assistant.cpp:73
msgid ""
"Documentation Finder, qmake projectmanager patches, usability improvements, "
"bugfixes ... "
msgstr ""
"Dokumentasjonsfinner, lapper for qmake prosjekthåndtering, forbedringer i "
"bruksnytten, feilfikser …"
#: src/main.cpp:78 src/main_assistant.cpp:74
#, fuzzy
msgid "TQMake project manager patches"
msgstr "Lapper for QMake prosjekthåndtering"
#: src/main.cpp:79 src/main_assistant.cpp:75
msgid "Cleanup and bugfixes for qEditor, AutoMake and much other stuff"
msgstr "Opprydding og feilfikser for qEditor, AutoMake og mye annet"
#: src/main.cpp:80
msgid "SnippetPart, debugger and usability patches"
msgstr "SnippetPart, feilsøker og lapper for brukervennlighet"
#: src/main.cpp:81
msgid "Artwork for the Ruby language"
msgstr "Pynt og bilder for Ruby-språket"
#: src/main.cpp:102 src/main_assistant.cpp:100
msgid "Loading Settings"
msgstr "Laster innstillinger"
#: src/main.cpp:113 src/main_assistant.cpp:105
msgid "Starting GUI"
msgstr "Starter GUI"
#: src/mainwindowshare.cpp:112
msgid "&Stop"
msgstr "&Stopp"
#: src/mainwindowshare.cpp:116
msgid ""
"<b>Stop</b>"
"<p>Stops all running processes (like building process, grep command, etc.). "
"When placed onto a toolbar provides a popup menu to choose a process to stop."
msgstr ""
"<b>Stopp</b> "
"<p>Stopper alle prosesser (som bygging, grep-kommando osv.). Når dette legges "
"på en verktøylinje lages det en sprettoppmeny der det kan velges en prosess som "
"skal stoppes."
#: src/mainwindowshare.cpp:130
msgid "Lets you switch the menubar on/off."
msgstr "Slår menylinja av/på."
#: src/mainwindowshare.cpp:136
msgid "Lets you configure shortcut keys."
msgstr "Stiller inn snarveistaster."
#: src/mainwindowshare.cpp:142
msgid "Lets you configure toolbars."
msgstr "Setter opp verktøylinjer."
#: src/mainwindowshare.cpp:148
msgid "Lets you configure system notifications."
msgstr "Stiller inn systemmeldinger."
#: src/mainwindowshare.cpp:152 src/mainwindowshare.cpp:153
#: src/mainwindowshare.cpp:298
#, fuzzy
msgid "Configure TDevelop"
msgstr "Innstillinger for KDevelop"
#: src/mainwindowshare.cpp:153
#, fuzzy
msgid "Lets you customize TDevelop."
msgstr "Tilpasser KDevelop."
#: src/mainwindowshare.cpp:157
msgid "Show statusbar"
msgstr "Vis statuslinje"
#: src/mainwindowshare.cpp:158
msgid "<b>Show statusbar</b><p>Hides or shows the statusbar."
msgstr "<b>Vis statuslinje</b><p>Skjuler eller viser statuslinja."
#: src/mainwindowshare.cpp:160
msgid "&Next Window"
msgstr "&Neste vindu"
#: src/mainwindowshare.cpp:161
msgid "Next window"
msgstr "Neste vindu"
#: src/mainwindowshare.cpp:162
msgid "<b>Next window</b><p>Switches to the next window."
msgstr "<b>Neste vindu</b><p>Bytter til neste vindu."
#: src/mainwindowshare.cpp:164
msgid "&Previous Window"
msgstr "&Forrige vindu"
#: src/mainwindowshare.cpp:165
msgid "Previous window"
msgstr "Forrige vindu"
#: src/mainwindowshare.cpp:166
msgid "<b>Previous window</b><p>Switches to the previous window."
msgstr "<b>Forrige vindu</b> <p>Bytter til det forrige vinduet."
#: src/mainwindowshare.cpp:168
msgid "&Last Accessed Window"
msgstr "&Sist brukte vindu"
#: src/mainwindowshare.cpp:169
msgid "Last accessed window"
msgstr "Sist brukte vindu"
#: src/mainwindowshare.cpp:170
msgid ""
"<b>Last accessed window</b>"
"<p>Switches to the last viewed window (Hold the Alt key pressed and walk on by "
"repeating the Up key)."
msgstr ""
"<b>Sist brukte vindu</b> "
"<p>Bytter til det vinduet som sist ble vist (Hold Alt-tasten nede og bla videre "
"med Up-tasten)."
#: src/mainwindowshare.cpp:172
msgid "&First Accessed Window"
msgstr "&Først brukte vindu"
#: src/mainwindowshare.cpp:173
msgid "First accessed window"
msgstr "Først brukte vindu"
#: src/mainwindowshare.cpp:174
msgid ""
"<b>First accessed window</b>"
"<p>Switches to the first accessed window (Hold the Alt key pressed and walk on "
"by repeating the Down key)."
msgstr ""
"<b>Først brukte vindu</b> "
"<p>Bytter til det vinduet som ble vist først (Hold Alt-tasten nede og bla "
"videre med Ned-tasten)."
#: src/mainwindowshare.cpp:176
#, fuzzy
msgid "Configure Plugins..."
msgstr "Sentrale tilleggsmoduler"
#: src/mainwindowshare.cpp:178
msgid "Configure &Editor..."
msgstr "Sett opp r&edigeringen …"
#: src/mainwindowshare.cpp:179
msgid "Configure editor settings"
msgstr "Sett opp innstillinger for redigeringen"
#: src/mainwindowshare.cpp:180
msgid "<b>Configure editor</b><p>Opens editor configuration dialog."
msgstr ""
"<b>Sett opp redigeringen</b>"
"<p>Åpner dialogvinduet for innstillingerfor redigeringen."
#: src/mainwindowshare.cpp:442
msgid "<b>Show menubar</b><p>Lets you switch the menubar on/off."
msgstr "<b>Vis menylinja</b><p>Slår menylinja av/på."
#: src/main_assistant.cpp:32
#, fuzzy
msgid ""
"The TDevelop Integrated Development Environment:\n"
"assistant and documentation viewer"
msgstr ""
"TDE Integrated Development Environment:\n"
"assistent og dokumentasjonsviser"
#: src/main_assistant.cpp:33
#, fuzzy
msgid "TDevelop Assistant"
msgstr "KDevelop-assistent"
#: src/languageselectwidget.cpp:65
msgid "Additional Language Support"
msgstr "Støtte for ytterligere språk"
#: src/languageselectwidget.cpp:115
msgid ""
"Primary language is '%1'. Please select additional languages the project might "
"contain."
msgstr "Hovedspråk er «%1». Velg flere språk som prosjektet kan inneholde."
#: src/editorproxy.cpp:48
msgid "Show Context Menu"
msgstr "Vis kontekst-meny"
#: src/statusbar.cpp:101
msgid " Line: %1 Col: %2 "
msgstr " Linje: %1 Kolonne: %2 "
#: src/projectsession.cpp:81
msgid ""
"The file %1 does not contain valid XML.\n"
"The loading of the session failed."
msgstr ""
"Fila %1 inneholder ikke gyldig XML.\n"
"Lasting av økta mislyktes."
#: src/projectsession.cpp:94
#, fuzzy
msgid ""
"The file %1 does not contain a valid TDevelop project session "
"('KDevPrjSession').\n"
msgstr ""
"Fila %1 inneholder ikke en gyldig KDevelop-prosjektøkt ('KDevPrjSession').\n"
#: src/projectsession.cpp:95
msgid "The document type seems to be: '%1'."
msgstr "Dokumenttypen ser ut til å være: «%1»."
#: src/newui/button.cpp:58
#, fuzzy
msgid "Assign Accelerator..."
msgstr "Sje&kk hurtigtaster"
#: src/newui/button.cpp:60
#, fuzzy
msgid "Clear Accelerator"
msgstr "Sje&kk hurtigtaster"
#: src/newui/button.cpp:318
#, fuzzy
msgid "Change Button Number"
msgstr "Endre funksjonsnavn"
#: src/newui/button.cpp:318
msgid "New accelerator number:"
msgstr ""
#: src/newui/ddockwindow.cpp:88
#, fuzzy
msgid "Move to left dock"
msgstr "Flytt til venstre"
#: src/newui/ddockwindow.cpp:89
#, fuzzy
msgid "Move to right dock"
msgstr "Flytt til høyre"
#: src/newui/ddockwindow.cpp:90
msgid "Move to bottom dock"
msgstr ""
#: src/profileengine/editor/main.cpp:33
#, fuzzy
msgid "TDevelop Profile Editor"
msgstr "Profilredigering for KDevelop"
#: src/profileengine/editor/main.cpp:34
msgid "(c) 2004, The KDevelop Developers"
msgstr "© 2004 KDevelop-utviklerne"
#: src/profileengine/editor/profileeditor.cpp:201
msgid "Core Plugins"
msgstr "Sentrale tilleggsmoduler"
#: src/profileengine/editor/profileeditor.cpp:203
msgid "Global Plugins"
msgstr "Globale tilleggsmoduler"
#: src/profileengine/editor/profileeditor.cpp:205
msgid "Project Plugins"
msgstr "Tilleggsmoduler for prosjektet"
#: src/profileengine/editor/profileeditor.cpp:254
msgid "Remove selected profile and all its subprofiles?"
msgstr "Fjerne den valgte profilen og alle dens underprofiler?"
#: src/profileengine/editor/profileeditor.cpp:267
msgid ""
"Cannot remove this profile because it is not a local (user-created) profile."
msgstr ""
"Kan ikke fjerne denne profilen fordi det ikke er en lokal (bruker-laget) "
"profil."
#: src/profileengine/editor/profileeditor.cpp:329
msgid "This plugin is already contained in the list of disabled plugins."
msgstr ""
"Denne tilleggsmodulen er allerede på lista over moduler som er slått av."
#: src/profileengine/editor/profileeditor.cpp:330
msgid "Enable Plugin"
msgstr "Slå på tilleggsmodul"
#: src/profileengine/editor/profileeditor.cpp:375
msgid "This plugin is already contained in the list of enabled plugins."
msgstr ""
"Denne tilleggsmodulen er allerede på lista over moduler som er slått på."
#: src/profileengine/editor/profileeditor.cpp:376
msgid "Disable Plugin"
msgstr "Slå av tilleggsmodul"
#: languages/cpp/cppsupportpart.cpp:254
msgid "Switch Header/Implementation"
msgstr "Bytt deklarasjon/implementasjon"
#: languages/cpp/cppsupportpart.cpp:257
msgid "Switch between header and implementation files"
msgstr "Hopp mellom deklarasjons- og kildefilen"
#: languages/cpp/cppsupportpart.cpp:258
msgid ""
"<b>Switch Header/Implementation</b>"
"<p>If you are currently looking at a header file, this brings you to the "
"corresponding implementation file. If you are looking at an implementation file "
"(.cpp etc.), this brings you to the corresponding header file."
msgstr ""
"<b>Bytt deklarasjon/implementasjon</b> "
"<p> Hvis du nå ser på en deklarasjonsfil, så vil dette hente fram den "
"tilsvarende implementasjonsfila. Hvis du ser på en implementasjonsfil (.cpp "
"osv.), så hentes den tilsvarende deklarasjonsfila fram."
#: languages/cpp/cppsupportpart.cpp:267 languages/php/phpsupportpart.cpp:128
msgid "Complete Text"
msgstr "Kompletter tekst"
#: languages/cpp/cppsupportpart.cpp:270
msgid "Complete current expression"
msgstr "Kompletter gjeldende uttrykk"
#: languages/cpp/cppsupportpart.cpp:271
#, fuzzy
msgid ""
"<b>Complete Text</p>"
"<p>Completes current expression using memory class store for the current "
"project and persistent class stores for external libraries."
msgstr ""
"<b>Fullfør tekst</b> "
"<p> Fullfører gjeldende uttrykk med bruk av minneklasselageret for gjeldende "
"prosjekt og persistente klasselagre for eksterne biblioteker."
#: languages/cpp/cppsupportpart.cpp:276
msgid "Create Accessor Methods"
msgstr "Opprett tilgangsmetoder"
#: languages/cpp/cppsupportpart.cpp:280 languages/cpp/cppsupportpart.cpp:690
msgid "Make Member"
msgstr "Opprett medlem"
#: languages/cpp/cppsupportpart.cpp:283
msgid "Make member"
msgstr "Opprett medlem"
#: languages/cpp/cppsupportpart.cpp:284 languages/cpp/cppsupportpart.cpp:691
msgid ""
"<b>Make member</b>"
"<p>Creates a class member function in implementation file based on the member "
"declaration at the current line."
msgstr ""
"<b>Opprett medlem</b> "
"<p> Oppretter en medlemsfunksjon i klassen, i en implementasjonsfil basert på "
"medlemsdeklarasjonen ved gjeldende linje."
#: languages/cpp/cppsupportpart.cpp:288
#, fuzzy
msgid "Navigation Menu"
msgstr "Oppstartsmodus"
#: languages/cpp/cppsupportpart.cpp:291
msgid "Show the navigation-menu"
msgstr ""
#: languages/cpp/cppsupportpart.cpp:292
#, fuzzy
msgid ""
"<b>Navigate</b>"
"<p>Shows a navigation-menu based on the type-evaluation of the item under the "
"cursor."
msgstr "<b>Beregn uttrykk</b><p>Viser verdien av uttrykket under markøren."
#: languages/cpp/cppsupportpart.cpp:299 languages/java/javasupportpart.cpp:163
msgid "Generate a new class"
msgstr "Lag en ny klasse"
#: languages/cpp/cppsupportpart.cpp:300
msgid "<b>New Class</b><p>Calls the <b>New Class</b> wizard."
msgstr "<b>Ny klasse</b><p> Starter <b>Ny klasse</b>-veiviseren."
#: languages/cpp/cppsupportpart.cpp:438 languages/cpp/cppsupportpart.cpp:1961
#: languages/cpp/cppsupportpart.cpp:2263
msgid "C++ Support"
msgstr "C++-støtte"
#: languages/cpp/cppsupportpart.cpp:446
msgid "C++ Class Generator"
msgstr "Klasse-generator for C++"
#: languages/cpp/cppsupportpart.cpp:451
msgid "C++ Parsing"
msgstr "C++-tolking"
#: languages/ada/adasupportpart.cpp:62 languages/cpp/cppsupportpart.cpp:586
#: languages/java/javasupportpart.cpp:151
#: languages/kjssupport/kjssupport_part.cpp:94
#: languages/pascal/pascalsupport_part.cpp:72
#: languages/php/phpsupportpart.cpp:107
msgid "Problems"
msgstr "Problemer"
#: languages/ada/adasupportpart.cpp:62 languages/cpp/cppsupportpart.cpp:586
#: languages/java/javasupportpart.cpp:151
#: languages/kjssupport/kjssupport_part.cpp:94
msgid "Problem reporter"
msgstr "Problemrapportør"
#: languages/cpp/cppsupportpart.cpp:740
msgid ""
"<b>Go to declaration</b>"
"<p>Provides a menu to select available function declarations in the current "
"file and in the corresponding header (if the current file is an implementation) "
"or source (if the current file is a header) file."
msgstr ""
"<b>Gå til deklarasjon</b> "
"<p> Gir en meny der man kan velge tilgjengelige funksjonsdeklarasjoner i "
"gjeldende fil og i tilsvarende deklarasjonsfil (hvis gjeldende fil er en "
"implementasjon) eller kildefil (hvis gjeldende fil er en deklarasjonsfil)."
#: languages/cpp/cppsupportpart.cpp:784
msgid ""
"<b>Go to definition</b>"
"<p>Provides a menu to select available function definitions in the current file "
"and in the corresponding header (if the current file is an implementation) or "
"source (if the current file is a header) file."
msgstr ""
"<b>Gå til definisjon</b> "
"<p> Gir en meny der man kan velge tilgjengelige funksjonsdefinisjoner i "
"gjeldende fil og i tilsvarende deklarasjonsfil (hvis gjeldende fil er en "
"implementasjon) eller kildefil (hvis gjeldende fil er en deklarasjonsfil)."
#: languages/cpp/cppsupportpart.cpp:824
msgid "Extract Interface..."
msgstr "Trekk ut grensesnitt …"
#: languages/cpp/cppsupportpart.cpp:825
msgid ""
"<b>Extract interface</b>"
"<p>Extracts interface from the selected class and creates a new class with this "
"interface. No implementation code is extracted and no implementation code is "
"created."
msgstr ""
"<b>Trekk ut grensesnitt</b> "
"<p>Trekker ut grensesnittet fra den valgte klassen og oppretter en ny klasse "
"med dette grensesnittet. Det trekkes ikke ut noe implementasjonskode og ingen "
"implementasjonskode blir opprettet."
#: languages/cpp/cppsupportpart.cpp:842
#: languages/python/pythonsupportpart.cpp:102
#: languages/ruby/rubysupport_part.cpp:671
msgid "Create or Select Implementation..."
msgstr "Opprett eller velg implementasjon …"
#: languages/cpp/cppsupportpart.cpp:843
#: languages/python/pythonsupportpart.cpp:103
#: languages/ruby/rubysupport_part.cpp:672
msgid ""
"<b>Create or select implementation</b>"
"<p>Creates or selects a subclass of selected form for use with integrated "
"KDevDesigner."
msgstr ""
"<b>Opprett eller velg implementasjon</b> "
"<p>Oppretter eller velger en underklasse av det valgte skjemaet til bruk med "
"KDevDesigner."
#: languages/cpp/cppsupportpart.cpp:1415 languages/cpp/cppsupportpart.cpp:1427
msgid "Please select a class."
msgstr "Velg en klasse."
#: languages/ada/adasupportpart.cpp:128 languages/cpp/cppsupportpart.cpp:1465
#: languages/csharp/csharpsupportpart.cpp:264
#: languages/java/javasupportpart.cpp:492
#: languages/perl/perlsupportpart.cpp:264 languages/php/phpsupportpart.cpp:427
msgid "Updating..."
msgstr "Oppdaterer …"
#: languages/ada/adasupportpart.cpp:155 languages/cpp/cppsupportpart.cpp:1620
#: languages/csharp/csharpsupportpart.cpp:293
#: languages/java/javasupportpart.cpp:591
#: languages/perl/perlsupportpart.cpp:293 languages/php/phpsupportpart.cpp:479
msgid "Done"
msgstr "Ferdig"
#: languages/cpp/cppsupportpart.cpp:1961
#: languages/java/javasupportpart.cpp:713
#, fuzzy
msgid ""
"Persistent class store will be disabled: you have a wrong version of pcs "
"installed.\n"
"Remove old pcs files?"
msgstr ""
"Persistent klasselagring blir slått av: Feil versjon av pcs er installert.\n"
"Fjerne gamle pcs-filer?"
#: languages/cpp/cppsupportpart.cpp:2262
msgid "File %1 already exists"
msgstr "Fila %1 finnes fra før"
#: languages/cpp/problemreporter.cpp:91 languages/java/problemreporter.cpp:84
#: languages/php/phperrorview.cpp:86
msgid ""
"<b>Problem reporter</b>"
"<p>This window shows various \"problems\" in your project. It displays TODO "
"entries, FIXME's and errors reported by a language parser. To add a TODO or "
"FIXME entry, just type"
"<br><tt>//@todo my todo</tt>"
"<br><tt>//TODO: my todo</tt>"
"<br><tt>//FIXME fix this</tt>"
msgstr ""
"<b>Problemrapportør</b> "
"<p>Dette vinduet viser forskjellige «problemer» i prosjektet. Det viser "
"TODO-oppføringer, FIXME og feil som en språktolker har meldt. En TODO eller "
"FIXME-oppføring kan legges til ved å skrive "
"<br><tt>//@todo husk dette </tt> "
"<br><tt>//TODO: husk å le</tt>"
"<br><tt>//FIXME rett på dette</tt>"
#: languages/ada/problemreporter.cpp:86 languages/cpp/problemreporter.cpp:109
#: languages/cpp/problemreporter.cpp:110 languages/java/problemreporter.cpp:91
#: languages/pascal/problemreporter.cpp:80 languages/php/phperrorview.cpp:101
#: languages/php/phperrorview.cpp:102
msgid "Level"
msgstr "Nivå"
#: languages/cpp/problemreporter.cpp:130 languages/php/phperrorview.cpp:120
msgid "Current"
msgstr "Nåværende"
#: languages/cpp/problemreporter.cpp:131 languages/php/phperrorview.cpp:121
msgid "Errors"
msgstr "Feil"
#: languages/cpp/problemreporter.cpp:132
#, fuzzy
msgid "Warnings"
msgstr "Advarsler (trygge)"
#: languages/cpp/problemreporter.cpp:133 languages/cpp/problemreporter.cpp:191
#: languages/cpp/problemreporter.cpp:323 languages/cpp/problemreporter.cpp:421
#: languages/php/phperrorview.cpp:122 languages/php/phperrorview.cpp:160
#: languages/php/phperrorview.cpp:274 languages/php/phperrorview.cpp:390
msgid "Fixme"
msgstr "Rett meg"
#: languages/cpp/problemreporter.cpp:134 languages/cpp/problemreporter.cpp:192
#: languages/cpp/problemreporter.cpp:324 languages/cpp/problemreporter.cpp:419
#: languages/php/phperrorview.cpp:123 languages/php/phperrorview.cpp:161
#: languages/php/phperrorview.cpp:275 languages/php/phperrorview.cpp:387
msgid "Todo"
msgstr "Gjøremål"
#: languages/cpp/problemreporter.cpp:135 languages/php/phperrorview.cpp:124
msgid "Filtered"
msgstr "Filtrert"
#: languages/cpp/problemreporter.cpp:178 languages/php/phperrorview.cpp:154
#, c-format
msgid "Filtered: %1"
msgstr "Filtrert: %1"
#: languages/cpp/problemreporter.cpp:224 languages/java/problemreporter.cpp:94
#: languages/php/phperrorview.cpp:185
msgid "Column"
msgstr "Kolonne"
#: languages/ada/problemreporter.cpp:87 languages/cpp/problemreporter.cpp:225
#: languages/java/problemreporter.cpp:95
#: languages/pascal/problemreporter.cpp:81 languages/php/phperrorview.cpp:186
msgid "Problem"
msgstr "Problem"
#: languages/cpp/subclassingdlg.cpp:190
#: languages/kjssupport/subclassingdlg.cpp:187
msgid "Create Subclass of "
msgstr "Opprett subklasse av "
#: languages/cpp/includepathresolver.cpp:251
msgid ""
"tried include-path-resolution while another resolution-process was still "
"running"
msgstr ""
#: languages/cpp/includepathresolver.cpp:260
msgid "Makefile is missing in folder \"%1\""
msgstr ""
#: languages/cpp/includepathresolver.cpp:260
#, c-format
msgid "problem while trying to resolve include-paths for %1"
msgstr ""
#: languages/cpp/includepathresolver.cpp:277
#, fuzzy
msgid "Cached: "
msgstr "KCachegrind"
#: languages/cpp/includepathresolver.cpp:301
msgid "Filename %1 seems to be malformed"
msgstr ""
#: languages/cpp/includepathresolver.cpp:385
#, fuzzy
msgid "Could not start the make-process"
msgstr "Klarte ikke skrive prosjektfila."
#: languages/cpp/includepathresolver.cpp:390
#, fuzzy
msgid "make-process finished with nonzero exit-status"
msgstr "Prosessen avsluttet med feil"
#: languages/cpp/includepathresolver.cpp:390
#: languages/cpp/includepathresolver.cpp:395
#, fuzzy, c-format
msgid "output: %1"
msgstr "Utdata"
#: languages/cpp/includepathresolver.cpp:395
#, fuzzy
msgid "make-process failed"
msgstr "Prosess avsluttet"
#: languages/cpp/includepathresolver.cpp:474
#: languages/cpp/includepathresolver.cpp:477
#, fuzzy
msgid "Recursive make-call failed"
msgstr "Rekursiv "
#: languages/cpp/includepathresolver.cpp:474
msgid "The parameter-string \"%1\" does not seem to be valid. Output was: %2"
msgstr ""
#: languages/cpp/includepathresolver.cpp:477
msgid "The directory \"%1\" does not exist. Output was: %2"
msgstr ""
#: languages/cpp/includepathresolver.cpp:481
#, fuzzy
msgid "Recursive make-call malformed"
msgstr "Rekursiv flett"
#: languages/cpp/includepathresolver.cpp:481
#, fuzzy, c-format
msgid "Output was: %2"
msgstr "Utdata-sti"
#: languages/cpp/includepathresolver.cpp:491
msgid "Output seems not to be a valid gcc or g++ call"
msgstr ""
#: languages/cpp/includepathresolver.cpp:491
msgid "Folder: \"%1\" Command: \"%2\" Output: \"%3\""
msgstr ""
#: languages/cpp/simpletype.cpp:24
#, fuzzy
msgid "typeless"
msgstr "typedef"
#: languages/cpp/simpletype.cpp:25
msgid "boolean value, 1 byte, ( \"true\" or \"false\" )"
msgstr ""
#: languages/cpp/simpletype.cpp:26
msgid "signed/unsigned character, 1 byte"
msgstr ""
#: languages/cpp/simpletype.cpp:27
msgid "signed character, 1 byte, ranged -128 to 127"
msgstr ""
#: languages/cpp/simpletype.cpp:28
msgid "unsigned character, 1 byte, ranged 0 to 255"
msgstr ""
#: languages/cpp/simpletype.cpp:29
msgid "wide character, 2 bytes, ranged 0 to 65.535"
msgstr ""
#: languages/cpp/simpletype.cpp:30
msgid "signed integer, 4 bytes, ranged -2.147.483.648 to 2.147.483.647"
msgstr ""
#: languages/cpp/simpletype.cpp:31
msgid "unsigned integer, 4 bytes, ranged 0 to 4.294.967.295"
msgstr ""
#: languages/cpp/simpletype.cpp:32
msgid "short integer, 2 bytes, ranged -32.768 to 32.768"
msgstr ""
#: languages/cpp/simpletype.cpp:33
msgid "unsigned short integer, 2 bytes, ranged 0 to 65.535"
msgstr ""
#: languages/cpp/simpletype.cpp:34
msgid "floating point value, 4 bytes, ranged ca. -3,4E+38 to 3,4E+38"
msgstr ""
#: languages/cpp/simpletype.cpp:35
msgid "double floating point value, 8 bytes, ranged ca. -1,8E+308 to 1,8E+308"
msgstr ""
#: languages/cpp/simpletype.cpp:36
msgid ""
"double long floating point value, 10 bytes, ranged ca. -3,4E+4932 to 3,4E+4932"
msgstr ""
#: languages/cpp/simpletype.cpp:37
msgid "unsigned integer, byte-count dependent on operating-system"
msgstr ""
#: languages/cpp/cppnewclassdlg.cpp:81
msgid "Use as Private"
msgstr "Bruk som privat"
#: languages/cpp/cppnewclassdlg.cpp:83
msgid "Use as Protected"
msgstr "Bruk som protected"
#: languages/cpp/cppnewclassdlg.cpp:85
msgid "Use as Public"
msgstr "Bruk som public"
#: languages/cpp/cppnewclassdlg.cpp:88
msgid "Unset"
msgstr "Slå av"
#: languages/cpp/cppnewclassdlg.cpp:92
msgid "Extend Base Class Functionality"
msgstr "Utvid funksjonalitet i basisklassen"
#: languages/cpp/cppnewclassdlg.cpp:94
msgid "Replace Base Class Method"
msgstr "Erstatt metode fra basisklassen"
#: languages/cpp/cppnewclassdlg.cpp:346
msgid ""
"Objective C does not support multiple inheritance.\n"
"Only the first base class in the list will be taken into account."
msgstr ""
"Ocjective C støtter ikke arv fra flere basisklasser.\n"
"Bare første basisklasse i lista blir tatt med."
#: languages/cpp/cppnewclassdlg.cpp:386
#, fuzzy
msgid ""
"Multiple inheritance requires TQObject derivative to be first and unique in "
"base class list."
msgstr ""
"Multippel arv krever at det avledete QObject er det første og eneste i "
"basisklasselista."
#: languages/cpp/cppnewclassdlg.cpp:852 languages/cpp/cppnewclassdlg.cpp:855
#: languages/cpp/cppnewclassdlg.cpp:1011 languages/cpp/cppnewclassdlg.cpp:1014
#, fuzzy
msgid "Slots (TQt-specific)"
msgstr "Spalter (spesifikt for QT)"
#: languages/cpp/cppnewclassdlg.cpp:856 languages/cpp/cppnewclassdlg.cpp:1015
msgid "Attributes"
msgstr "Attributter"
#: languages/cpp/cppnewclassdlg.cpp:958 languages/cpp/cppnewclassdlg.cpp:1214
msgid "replace"
msgstr "erstatt"
#: languages/cpp/cppnewclassdlg.cpp:958 languages/cpp/cppnewclassdlg.cpp:1208
#: languages/cpp/cppnewclassdlg.cpp:1529
msgid "extend"
msgstr "utvid"
#: languages/cpp/cppnewclassdlg.cpp:1327
msgid "You must enter a classname."
msgstr "Du må skrive inn et klassenavn."
#: languages/cpp/cppnewclassdlg.cpp:1334
msgid "You must enter a name for the header file."
msgstr "Du må skrive inn et navn på deklarasjonsfila."
#: languages/cpp/cppnewclassdlg.cpp:1340
msgid "You must enter a name for the implementation file."
msgstr "Du må skrive inn et navn på implementasjonsfila."
#: languages/cpp/cppnewclassdlg.cpp:1347
msgid ""
"Generated files will always be added to the active directory, so you must not "
"give an explicit subdirectory."
msgstr ""
"Opprettede filer blir alltid lagt til i den aktive mappa, så du må ikke oppgi "
"uttrykkelig en undermappe."
#: languages/cpp/cppnewclassdlg.cpp:1374
#, fuzzy
msgid ""
"TDevelop is not able to add classes to existing header or implementation files."
msgstr ""
"KDevelop klarer ikke legge til klasser i eksisterende deklarasjons- eller "
"kodefiler."
#: languages/cpp/cppimplementationwidget.cpp:76
#: languages/cpp/cppnewclassdlg.cpp:1840
msgid "Cannot write to implementation file"
msgstr "Klarer ikke skrive til implementeringsfila"
#: languages/cpp/cppimplementationwidget.cpp:86
#: languages/cpp/cppnewclassdlg.cpp:2064
msgid "Cannot write to header file"
msgstr "Klarer ikke skrive til deklarasjonsfila"
#: languages/cpp/cppcodecompletion.cpp:359
#, fuzzy
msgid "Jump to %1 %2"
msgstr "Type for %1 er %2"
#: languages/cpp/cppcodecompletion.cpp:437
msgid "Jump to declaration of %1(...)"
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:438
msgid "Jump to definition of %1(...)"
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:440
#: languages/cpp/cppcodecompletion.cpp:1539
#: languages/cpp/cppcodecompletion.cpp:1571
#, fuzzy, c-format
msgid "Jump to %1"
msgstr "Hopp til markøren"
#: languages/cpp/cppcodecompletion.cpp:444
#: languages/cpp/cppcodecompletion.cpp:593
msgid " is unresolved"
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:446
#: languages/cpp/cppcodecompletion.cpp:595
msgid " (builtin "
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:539
#, fuzzy
msgid "Show %1 %2"
msgstr "Vis %1"
#: languages/cpp/cppcodecompletion.cpp:586
#, c-format
msgid "Show %1"
msgstr "Vis %1"
#: languages/cpp/cppcodecompletion.cpp:647
msgid "#include \"%1\" ( defines %2 )"
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:682
#: languages/cpp/cppcodecompletion.cpp:795
#, fuzzy, c-format
msgid "Comment on %1"
msgstr "Ko&mmentar:"
#: languages/cpp/cppcodecompletion.cpp:698
msgid "Specialized from \"%1\""
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:707
#, fuzzy
msgid "Template-param \"%1\""
msgstr "Malnavn"
#: languages/cpp/cppcodecompletion.cpp:719
#, fuzzy
msgid "Return-type \"%1\""
msgstr "Returt&ype:"
#: languages/cpp/cppcodecompletion.cpp:727
#, fuzzy
msgid "Argument-types"
msgstr "Ar&gumenter"
#: languages/cpp/cppcodecompletion.cpp:737
#, fuzzy
msgid "Argument \"%1\""
msgstr "Ar&gumenter"
#: languages/cpp/cppcodecompletion.cpp:749
#, fuzzy
msgid "Trace"
msgstr "erstatt"
#: languages/cpp/cppcodecompletion.cpp:756
#, fuzzy
msgid "%1 -> %2"
msgstr "%1>\t%2"
#: languages/cpp/cppcodecompletion.cpp:763
#: vcs/subversion/svn_logviewwidget.cpp:54
#, fuzzy
msgid "Comment"
msgstr "Ko&mmentar:"
#: languages/cpp/cppcodecompletion.cpp:782
#, fuzzy
msgid "Base-class \"%1\""
msgstr "Basisklasse:"
#: languages/cpp/cppcodecompletion.cpp:788
msgid "Nested in \"%1\""
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:957
#, fuzzy
msgid "Jump to declaration under cursor"
msgstr "Hopp til markøren"
#: languages/cpp/cppcodecompletion.cpp:961
#, fuzzy
msgid "Jump to definition under cursor"
msgstr "Hopp til markøren"
#: languages/cpp/cppcodecompletion.cpp:1535
#: languages/cpp/cppcodecompletion.cpp:1537
msgid "Navigate by Macro \"%1\""
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:1541
#, fuzzy
msgid "Body"
msgstr "Fet"
#: languages/cpp/cppcodecompletion.cpp:1567
#: languages/cpp/cppcodecompletion.cpp:1569
#, c-format
msgid "Goto Include File: %1"
msgstr "Gå til Include-fil: %1"
#: languages/cpp/cppcodecompletion.cpp:1583
msgid ""
"This include-file could not be located regularly, and was selected from the "
"project file list."
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:1588
#: languages/cpp/cppcodecompletion.cpp:1590
#, fuzzy
msgid "Not Found: \"%1\""
msgstr "Ingen kilde: %1"
#: languages/cpp/cppcodecompletion.cpp:1612
#: languages/cpp/cppcodecompletion.cpp:1614
msgid "Navigate by \"%1\""
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:1616
msgid ""
"<b>Navigation</b>"
"<p>Provides a menu to navigate to positions of items that are involved in this "
"expression"
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:1632
#: languages/cpp/cppcodecompletion.cpp:1634
msgid "Navigate Class-View by \"%1\""
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:1636
msgid ""
"<b>Navigation</b>"
"<p>Provides a menu to show involved items in the class-view "
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:1706
#, fuzzy
msgid "Type of \"%1\" is \"%2\""
msgstr "Type for %1 er %2"
#: languages/cpp/cppcodecompletion.cpp:1708
msgid "Comment on variable \"%1\": \"%2\""
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:1711
msgid "Comment on \"%1\": \"%2\""
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:1714
msgid "\"%1\" has no comment"
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:1719
msgid "Type of \"%1\" is unresolved, name: \"%2\""
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:1721
msgid "\"%1\" is of builtin type \"%2\", a %3"
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:1726
msgid ""
"Type of \"%1\" could not be evaluated: tried to evaluate expression as \"%2\""
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:4264
#, fuzzy
msgid "Type of \"%1\" is \"%2\", %3"
msgstr "Type for %1 er %2"
#: languages/cpp/cppcodecompletion.cpp:4430
msgid " (resolved) "
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:4438
#: languages/cpp/cppcodecompletion.cpp:4447
msgid " (unresolved) "
msgstr ""
#: languages/cpp/cppcodecompletion.cpp:4442
msgid " (builtin type) "
msgstr ""
#: languages/cpp/ccconfigwidget.cpp:233
#, fuzzy
msgid "Are you sure you want to delete the \"%1\" database?"
msgstr "Er du sikker på at du vil slette «%1»-databasen?"
#: languages/cpp/ccconfigwidget.cpp:238
#, fuzzy
msgid "Delete Database"
msgstr "Slett database"
#: languages/cpp/ccconfigwidget.cpp:574
#, fuzzy
msgid "Edit TQt4 Designer Plugin Paths"
msgstr "Slå av tilleggsmodul"
#: languages/cpp/ccconfigwidget.cpp:577
#, fuzzy
msgid "Plugin Paths"
msgstr "Stier for tille&ggsmoduler"
#: languages/cpp/kdevdriver.cpp:178
#, fuzzy
msgid "%1. Message: %2"
msgstr "&Melding:"
#: languages/cpp/pcsimporter/qtimporter/settingsdialog.cpp:115
msgid ""
"This does not appear to be a valid TQt3 include directory.\n"
"Please select a different directory."
msgstr ""
#: languages/cpp/pcsimporter/qt4importer/settingsdialog.cpp:107
#: languages/cpp/pcsimporter/qtimporter/settingsdialog.cpp:115
#: languages/cpp/pcsimporter/tdelibsimporter/settingsdialog.cpp:92
#, fuzzy
msgid "Invalid Directory"
msgstr "Lokal mappe"
#: languages/cpp/pcsimporter/qt4importer/settingsdialog.cpp:107
msgid ""
"This does not appear to be a valid TQt4 include directory.\n"
"Please select a different directory."
msgstr ""
#: languages/cpp/pcsimporter/tdelibsimporter/settingsdialog.cpp:92
msgid ""
"This does not appear to be a valid TDE include directory.\n"
"Please select a different directory."
msgstr ""
#: languages/cpp/pcsimporter/customimporter/settingsdialog.cpp:44
msgid "Directories to Parse"
msgstr "Kataloger som skal tolkes"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:110
msgid "Only check the code for syntax errors, do not produce object code"
msgstr "Bare sjekk kodens syntaks, ikke lag binærkode"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:112
msgid "Generate extra code to write profile information for gprof"
msgstr "Lag ekstra kode for profilinformasjon til gprof"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:114
msgid "Do not delete intermediate output like assembler files"
msgstr "Ikke slett mellomfiler slik som assembler-filer"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:119
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:288
#: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:59
#: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:60
msgid "Code Generation"
msgstr "Kodeopprettelse"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:123
msgid "Enable exception handling"
msgstr "Bruk unntakshåndtering (exceptions)"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:129
msgid "Disable exception handling"
msgstr "Slå av unntakshåndtering (exceptions)"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:136
msgid ""
"Return certain struct and union values in memory rather than in registers"
msgstr "Returner visse struct og union-verdier i minne i stedet for registre"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:138
msgid "Return certain struct and union values in registers when possible"
msgstr "Returner visse struct og union-verdier i registre når det er mulig"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:140
msgid "For an enum, choose the smallest possible integer type"
msgstr "Velg minste mulige heltallstype for en enum"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:142
msgid "Make 'double' the same as 'float'"
msgstr "Gjør «double» det samme som «float»"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:173
#: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:121
msgid "Optimization Level"
msgstr "Optimeringsnivå"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:176
#: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:124
msgid "No optimization"
msgstr "Ingen optimering"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:177
#: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:125
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:377
msgid "Level 1"
msgstr "Nivå 1"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:178
#: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:126
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:379
msgid "Level 2"
msgstr "Nivå 2"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:183
msgid "<qt>Do not store floating point variables in registers</qt>"
msgstr "<qt>Ikke lagre flyttallsvariabler i registre</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:186
msgid ""
"<qt>Pop the arguments to each function call directly after the function "
"returns</qt>"
msgstr ""
"<qt>Popp argumentene til hvert funksjonskall rett etter at funksjonen "
"returnerer</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:190
msgid ""
"<qt>Force memory operands to be copied into registers before doing arithmetic "
"on them</qt>"
msgstr ""
"<qt>Tving minneoperander kopiert inn i registre før det regnes med dem</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:194
msgid ""
"<qt>Force memory address constants to be copied into registers before doing "
"arithmetic on them</qt>"
msgstr ""
"<qt>Tving minneadressekonstanter kopiert inn i registre før det regnes med "
"dem</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:198
msgid ""
"<qt>Do not keep the frame pointer in a register for functions that do not need "
"one</qt>"
msgstr ""
"<qt> Ikke hold rammepekeren i et register for funksjoner som ikke trenger det "
"</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:202
msgid "<qt>Ignore the <i>inline</i> keyword</qt>"
msgstr "<qt>Ignorer nøkkelordet <i>inline</i></qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:208
msgid ""
"<qt>Do not make member functions inline merely because they are defined inside "
"the class scope</qt>"
msgstr ""
"<qt>Ikke gjør medlemsfunksjoner inline bare fordi de er angitt inne i klassens "
"skop </qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:271
msgid "Dialect"
msgstr "Dialekt"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:273
msgid "Interpret source code as Fortran 90 free form"
msgstr "Les kildekoden som Fortran 90, fritt format"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:276
msgid "Allow certain Fortran 90 constructs"
msgstr "Tillat noen Fortran 90-konstruksjoner"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:278
msgid "Allow '$' in symbol names"
msgstr "Tillat «$» i symbolnavn"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:280
msgid "Allow '' in character constants to escape special characters"
msgstr "Tillat \" i tegnkonstanter for å angi spesialtegn"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:283
msgid "DO loops are executed at least once"
msgstr "DO-sløyfer utføres minst en gang"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:290
msgid "Treat local variables as if SAVE statement had been specified"
msgstr "Behandle lokale variabler som om SAVE var oppgitt"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:292
msgid "Init local variables to zero"
msgstr "Lokale variabler får null som startverdi"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:294
msgid "Generate run-time checks for array subscripts"
msgstr "Lag test på array-indekser under kjøring"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:326
msgid "Inhibit all warnings"
msgstr "Hold tilbake alle advarsler"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:328
msgid "Inhibit warnings about the use of #import"
msgstr "Hold tilbake advarsler om bruken av #import"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:330
msgid "Make all warnings into errors"
msgstr "Gjør om alle advarsler til feil"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:332
msgid "Issue all warnings demanded by strict ANSI C or ISO C++"
msgstr "Gi alle advarsler som følger av streng ANSI C eller ISO C++"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:334
msgid "Like -pedantic, but errors are produced instead of warnings"
msgstr "Som -pedantic, men det lages feilmeldinger i stedet for advarsler"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:336
msgid "All warnings below, combined (-Wall):"
msgstr "Alle advarsler nedenfor, kombinert (-Wall):"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:341
msgid "<qt>Warn if an array subscript has type <i>char</i></qt>"
msgstr "<qt>Advar om en array-indeks har type <i>char</i></qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:343
msgid "<qt>Warn when a comment-start sequence /* appears inside a comment</qt>"
msgstr "<qt>Advar når en kommentarstart /* ligger inne i en kommentar </qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:345
msgid ""
"<qt>Check calls to <i>printf()</i>, <i>scanf()</i> etc\n"
"to make sure that the arguments supplied have types appropriate\n"
"to the format string specified, and that the conversions specified\n"
"in the format string make sense</qt>"
msgstr ""
"<qt>Sjekk kall til <i>printf()</i>, <i>scanf()</i> osv\n"
"for å se til at de oppgitte argumentene har typer som stemmer med\n"
"de oppgitte formatstrengene, og at konverteringene som er oppgitt\n"
"i formatstrengene gir mening</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:350
msgid ""
"<qt>Enable -Wformat plus format checks not \n"
"included in -Wformat. Currently equivalent to \n"
"`-Wformat -Wformat-nonliteral -Wformat-security \n"
"-Wformat-y2k'.</qt>"
msgstr ""
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:355
msgid "<qt>Warn when a declaration does not specify a type</qt>"
msgstr "<qt>Advar når en deklarasjon ikke angir en type</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:358
msgid "<qt>Issue a warning when a non-declared function is used</qt>"
msgstr "<qt>Gi advarsel når en ikke-deklarert funksjon brukes </qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:361
msgid "<qt>Issue an error when a non-declared function is used</qt>"
msgstr "<qt>Gi feilmelding når en ikke-deklarert funksjon brukes</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:363
msgid "<qt>Warn if the type of <i>main()</i> is suspicious</qt>"
msgstr "<qt>Advar hvis <i>main</i> har en mistenkelig type</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:365
msgid "<qt>Warn when multicharacter constants are encountered</qt>"
msgstr "<qt>Advar når konstanter med flere tegn påtreffes</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:367
msgid ""
"<qt>Warn if an aggregate or union initializer is not fully bracketed</qt>"
msgstr ""
"<qt>Advar hvis en initialisering av en union eller samling ikke er helt "
"omsluttet</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:369
msgid "<qt>Warn when parentheses are omitted in certain contexts</qt>"
msgstr "<qt>Advar når parenteser er utelatt i visse sammenhenger</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:371
msgid ""
"<qt>Warn about code that may have undefined semantics because of\n"
"violations of sequence point rules in the C standard</qt>"
msgstr ""
"<qt>Advar om kode som kan ha uspesifisert effekt fordi \n"
"reglene for rekkefølge i C-standarden ikke er blitt overholdt</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:374
msgid "<qt>Warn when a function without explicit return type is defined</qt>"
msgstr "<qt>Advar når en funksjon angis uten eksplisitt retur-type</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:376
msgid ""
"<qt>Warn whenever a <i>switch</i> statement has an index of enumeral type\n"
"and lacks a <i>case</i> for one or more of the named codes of that "
"enumeration</qt>"
msgstr ""
"<qt>Advar når en <i>switch</i>-setning har en index av enum-type\n"
"og mangler en <i>case</i> for en eller flere navngitte koder i den "
"enum-typen</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:379
msgid "<qt>Warn when trigraphs are encountered</qt>"
msgstr "<qt>Advar når tri-grafer påtreffes</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:381
msgid "<qt>Warn when a variable is declared but not used</qt>"
msgstr "<qt>Advar når en variabel er deklarert men ikke brukt</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:383
msgid "<qt>Warn when a variable is used without being initialized first</qt>"
msgstr "<qt>Advar når en variabel er brukt uten å være initiert først</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:385
msgid "<qt>Warn when an unknown #pragma statement is encountered</qt>"
msgstr "<qt>Advar ved ukjent #pragma-setning</qt>"
# | msgid "<qt>Warn when a variable is declared but not used</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:387
#, fuzzy
msgid "<qt>Warn when a division by zero occurs.</qt>"
msgstr "<qt>Advar når en variabel er deklarert men ikke brukt</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:391
msgid ""
"<qt>Warn when the order of member initializers is different from\n"
"the order in the class declaration</qt>"
msgstr ""
"<qt>Advar når rekkefølgen av medlemsinitialiseringer ikke er den \n"
"samme som i klassedeklarasjonen</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:426
msgid "<qt>Set options not included in -Wall which are very specific</qt>"
msgstr "<qt>Sett svært spesifikke brytere som ikke er med i -Wall</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:428
msgid "<qt>Warn if floating point values are used in equality comparisons</qt>"
msgstr "<qt>Advar om flyttallsverdier sammenliknes for likhet</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:430
msgid ""
"<qt>Warn if an undefined identifier is evaluated in an <i>#if</i> directive</qt>"
msgstr ""
"<qt>Advar hvis en uspesifisert identifikator blir evaluert i et <i>#if</i>"
"-direktiv</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:432
msgid "<qt>Warn whenever a local variable shadows another local variable</qt>"
msgstr ""
"<qt>Advr når en lokal variabel skygger for en annen lokal variabel</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:434
msgid ""
"<qt>Warn about anything that depends on the <i>sizeof</i> a\n"
"function type or of <i>void</i></qt>"
msgstr ""
"<qt>Advar om alt som avhenger av <i>sizeof</a> en funksjonstype eller <i>"
"void</i></qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:437
msgid ""
"<qt>Warn whenever a pointer is cast so as to remove a type\n"
"qualifier from the target type</qt>"
msgstr ""
"<qt>Gi advarsel når en peker castes slik at en type-kvalifikator\n"
"fjernes fra måltypen</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:440
msgid ""
"<qt>Warn whenever a pointer is cast such that the required\n"
"alignment of the target is increased</qt>"
msgstr ""
"<qt>Gi advarsel når en peker castes slik at den nødvendige\n"
"justeringa av målet økes</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:443
msgid ""
"<qt>Warn when the address of a string constant is cast\n"
"into a non-const <i>char *</i> pointer</qt>"
msgstr ""
"<qt>Gi advarsel når adressen til en streng-konstant castes til\n"
"en ikke-const <i>char *</i>-peker</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:446
msgid ""
"<qt>Warn if a prototype causes a type conversion that is different\n"
"from what would happen to the same argument in the absence\n"
"of a prototype</qt>"
msgstr ""
"<qt>Gi advarsel hvis en prototype forårsaker en konvertering som\n"
"er annerledes enn det som ville skje med det samme argumentet\n"
"uten prototype</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:450
msgid ""
"<qt>Warn when a comparison between signed and unsigned values\n"
"could produce an incorrect result when the signed value\n"
"is converted to unsigned</qt>"
msgstr ""
"<qt>Gi advarsel når en sammenlikning mellom verdier med og uten\n"
"fortegn ville gi feil resultat når verdien med fortegn konverteres til\n"
"en verdi uten fortegn</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:454
msgid ""
"<qt>Warn about functions which might be candidates for attribute 'noreturn'</qt>"
msgstr ""
"<qt>Gi advarsel om funksjoner som kan være kandidater til atttributten "
"«noreturn»</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:456
msgid ""
"<qt>Warn if any functions that return structures or unions are\n"
"defined or called</qt>"
msgstr ""
"<qt>Gi advarsel hvis det er angitt noen funksjoner som returnerer\n"
"structer eller unioner<qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:459
msgid ""
"<qt>Warn if a global function is defined without a previous declaration</qt>"
msgstr ""
"<qt>Gi advarsel hvis en global funksjon angis uten foregående deklarasjon</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:462
msgid ""
"<qt>Do not warn about uses of functions, variables, and types marked as\n"
"deprecated by using the 'deprecated' attribute</qt>"
msgstr ""
"<qt>Ikke advar om bruk av funksjoner, variabler og typer merket som \n"
"utdatert ved bruk av atttrbuttet «deprecated»</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:465
msgid ""
"<qt>Warn if a structure is given the packed attribute, but the packed\n"
"attribute has no effect on the layout or size of the structure</qt>"
msgstr ""
"<qt>Gi advarsel hvis en struktur har attributtet «packed» uten at dette\n"
"har virkning på størrelsen eller arrangementet av strukturen</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:468
msgid ""
"<qt>Warn if padding is included in a structure, either to align an\n"
"element of the structure or to align the whole structure</qt>"
msgstr ""
"<qt>Gi advarsel hvis det er tatt med utfylling i en struktur, enten for å\n"
"innrette et element i strukturen eller for å innrette hele strukturen</qt> "
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:471
msgid "<qt>Warn if anything is declared more than once in the same scope</qt>"
msgstr ""
"<qt>Gi advarsel hvis noe er deklarert mer enn en gang i samme virkefelt</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:473
msgid "<qt>Warn if the compiler detects that code will never be executed</qt>"
msgstr ""
"<qt>Gi advarsel hvis kompilatoren oppdager at noe kode aldri vil bli utført</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:475
msgid "<qt>Warn if an <i>inline</i> function cannot be inlined</qt>"
msgstr ""
"<qt>Gi advarsel hvis en <i>inline</i>-funksjon ikke kan legges i "
"programteksten</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:477
msgid "<qt>Warn if the <i>long long</i> type is used</qt>"
msgstr "<qt>Gi advarsel hvis <i>long long</i> typen brukes</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:479
msgid "<qt>Warn if a requested optimization pass is disabled</qt>"
msgstr ""
"<qt>Gi advarsel hvis det er bedt om en optimaliseringsgjennomgang som er slått "
"av</qt>"
# | msgid "<qt>Warn when a variable is declared but not used</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:481
#, fuzzy
msgid "<qt>Do not warn if there is a division by zero</qt>"
msgstr "<qt>Advar når en variabel er deklarert men ikke brukt</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:486
msgid ""
"<qt>Warn about certain constructs that behave differently\n"
"in traditional and ANSI C</qt>"
msgstr ""
"<qt>Gi advarsel om visse oppsett som fungerer forskjellig i\n"
"tradisjonell og ANSI C</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:489
msgid "<qt>Warn whenever a function call is cast to a non-matching type</qt>"
msgstr ""
"<qt>Gi advarsel når et funksjonskall castes til en type som ikke passer</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:491
msgid ""
"<qt>Warn if a function is declared or defined without specifying\n"
"the argument types</qt>"
msgstr ""
"<qt>Gi advarsel hvis en funksjon er deklarert eller angitt uten at \n"
"argumenttypene er oppgitt</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:494
msgid ""
"<qt>Warn if a global function is defined without a previous prototype "
"declaration</qt>"
msgstr ""
"<qt>Gi advarsel hvis en global funksjon er angitt uten foregående "
"protoryperdeklarasjon</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:496
msgid ""
"<qt>Warn if an <i>extern</i> declaration is encountered within a function</qt>"
msgstr ""
"<qt>Gi advarsel hvis en <i>extern</i> deklarasjon finnes inne i en funksjon</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:503
msgid ""
"<qt>Warn when a function declaration hides virtual\n"
"functions from a base class</qt>"
msgstr ""
"<qt>Gi advarsel når en funksjonsdeklarasjon skjuler virtuelle\n"
"funksjoner fra en basisklasse</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:506
msgid ""
"<qt>Warn when g++'s synthesis behavior does\n"
"not match that of cfront</qt>"
msgstr ""
"<qt>Gi advarsel når synteseoppførselen til g++ ikke\n"
"stemmer med cfronts</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:509
msgid ""
"<qt>Warn when a class seems unusable, because all the constructors or\n"
"destructors in a class are private and the class has no friends or\n"
"public static member functions</qt>"
msgstr ""
"<qt>Gi advarsel når en klasse virker ubrukelig fordi alle konstruktørene\n"
"eller destruktørene i en klasse er private og klassen ikke har venner\n"
"eller «public static» medlemsfunksjoner</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:513
msgid ""
"<qt>Warn when a class declares a non-virtual destructor that should\n"
"probably be virtual, because it looks like the class will be used\n"
"polymorphically</qt>"
msgstr ""
"<qt>Gi advarsel når en klasse deklarerer en ikke-virtuell destruktør som\n"
"antakelig burde være virtuell, fordi det ser ut til at klassen vil blu brukt\n"
"polymorfisk</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:517
msgid ""
"<qt>Warn when overload resolution chooses a promotion from unsigned or\n"
"enumeral type to a signed type over a conversion to an unsigned\n"
"type of the same size. Previous versions of G++ would try to\n"
"preserve unsignedness, but the standard mandates the current behavior</qt>"
msgstr ""
"<qt>Gi advarsel når oppløsning av overstyring velger en promovering\n"
"fra «unsigned» eller «enum»-type til en type med fortegn fremfor en \n"
"type uten fortegn av samme størrelse. Tidligere versjoner av C++ ville\n"
"forsøke å beholde fortegnsløsheten, men standarden krever nåværende "
"oppførsel</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:522
msgid ""
"<qt>Warn when G++ generates code that is probably not compatible with\n"
"the vendor-neutral C++ ABI</qt>"
msgstr ""
"<qt>Gi advarsel når G++ lager kode som antakelig ikke er kompatibel med\n"
"den leverandør-nøytrale ABI-en for C++</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:528
msgid ""
"<qt>Warn about violations of the following style guidelines from Scott\n"
"Meyers' 'Effective C++' book:\n"
"* Item 11: Define a copy constructor and an assignment\n"
" operator for classes with dynamically allocated memory;\n"
"* Item 12: Prefer initialization to assignment in constructors;\n"
"* Item 14: Make destructors virtual in base classes;\n"
"* Item 15: Have `operator=' return a reference to `*this';\n"
"* Item 23: Do not try to return a reference when you must\n"
" return an object\n"
"\n"
"and about violations of the following style guidelines from Scott\n"
"Meyers' 'More Effective C++' book:\n"
"* Item 6: Distinguish between prefix and postfix forms of\n"
" increment and decrement operators;\n"
"* Item 7: Never overload '&&', '||', or ','</qt>"
msgstr ""
"<qt>Gi advarsel om brudd på følgende retningslinjer fra Scott Meyer's \n"
"bok «Effective C++»:\n"
"* Punkt 11: Angi en kopi-konstruktør og en tilordningsoperator\n"
"for klasser med dynamisk tilordnet minne\n"
"* Punkt 12: Bruk initialisering heller enn tilordning i konstruktører\n"
"* Punkt 14: Gjør destruktorer virtuelle i basisklasser\n"
"* Punkt 15: La «operator=» returnere en referanse til «*this»\n"
"* Punkt 23: Ikke forsøk å returnere en referanse når du må returnere et objekt\n"
"\n"
"og om brudd på følgende stil-retningslinjer fra Scott Meyers bok \n"
"«More effective C++»:\n"
"* Punkt 6: Skjelne mellom prefiks- og postfiks-former av \n"
"inkrement- og dekrement-operatorer\n"
"* Punkt 7: Overstyr aldri «&&», «||» eller «,»</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:544
msgid "<qt>Do not warn about usage of deprecated features</qt>"
msgstr "<qt>Ikke advar om bruk av frarådde egenskaper</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:546
msgid ""
"<qt>Disable warnings when non-templatized friend functions are declared\n"
"within a template</qt>"
msgstr ""
"<qt>Slå av advarsler hvis vennefuksjoner uten mal deklareres\n"
"inne i en mal</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:549
msgid ""
"<qt>Warn if an old-style (C-style) cast to a non-void type is used\n"
"within a C++ program</qt>"
msgstr ""
"<qt>Advar hvis en cast i C-stil til en ikke-void type brukes inne\n"
"i et C++-program</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:552
msgid ""
"<qt>Disable the diagnostic for converting a bound pointer to member\n"
"function to a plain pointer</qt>"
msgstr ""
"<qt>Slå av melding for konvertering av en bundet peker til en \n"
"medlemsfunksjon til en ren peker</qt>"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:583
#: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:251
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:318
msgid "Optimization"
msgstr "Optimering"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:588
msgid "Fortran Specifics"
msgstr "Spesielt for Fortran"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:594
msgid "Warnings (safe)"
msgstr "Advarsler (trygge)"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:597
msgid "Warnings (unsafe)"
msgstr "Advarsler (utrygge)"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:680
msgid "GNU C Compiler Options"
msgstr "GNU C kompilatorvalg"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:682
msgid "GNU C++ Compiler Options"
msgstr "GNU C++ kompilartorvalg"
#: languages/cpp/compiler/gccoptions/gccoptionsplugin.cpp:684
msgid "GNU Fortran 77 Compiler Options"
msgstr "GNU Fortran 77 kompilatorvalg"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:180
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:158
msgid " temporary"
msgstr " midlertidig"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:182
msgid " hw"
msgstr " hw"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:219
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:231
msgid "Status"
msgstr "Status"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:221
msgid "Condition"
msgstr "Betingelse"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:222
msgid "Ignore Count"
msgstr "Ignorer antall"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:223
msgid "Hits"
msgstr "Treff"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:224
msgid "Tracing"
msgstr "Sporing"
#: languages/cpp/debugger/breakpoint.cpp:421
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:227
#, fuzzy
msgid ""
"_: Code breakpoint\n"
"Code"
msgstr "Slå et stoppunkt av/på"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:229
msgid ""
"_: Data breakpoint\n"
"Data write"
msgstr ""
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:231
msgid ""
"_: Data read breakpoint\n"
"Data read"
msgstr ""
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:236
#, fuzzy
msgid ""
"_: New breakpoint\n"
"New"
msgstr "Legg til tomt stoppunkt"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:238
#, fuzzy
msgid "Show text"
msgstr "Vis kontekst-meny"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:242
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:724
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:239
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:663
msgid "Disable"
msgstr "Slå av"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:248
#, fuzzy
msgid "Disable all"
msgstr "Slå av"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:249
#, fuzzy
msgid "Enable all"
msgstr "Slå på"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:250
#, fuzzy
msgid "Delete all"
msgstr "Slett signal"
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:375
msgid ""
"<b>Data write breakpoint</b>"
"<br>Expression: %1"
"<br>Address: 0x%2"
"<br>Old value: %3"
"<br>New value: %4"
msgstr ""
#: languages/cpp/debugger/gdbbreakpointwidget.cpp:728
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:667
msgid "Enable"
msgstr "Slå på"
#: languages/cpp/debugger/breakpoint.cpp:265
#: languages/ruby/debugger/breakpoint.cpp:122
msgid "Disabled"
msgstr "Slått av"
#: languages/cpp/debugger/breakpoint.cpp:270
#: languages/ruby/debugger/breakpoint.cpp:127
msgid "Pending (add)"
msgstr "Venter (tillegg)"
#: languages/cpp/debugger/breakpoint.cpp:272
#: languages/ruby/debugger/breakpoint.cpp:129
msgid "Pending (clear)"
msgstr "Venter (tøm)"
#: languages/cpp/debugger/breakpoint.cpp:274
#: languages/ruby/debugger/breakpoint.cpp:131
msgid "Pending (modify)"
msgstr "Venter (endre)"
#: languages/cpp/debugger/breakpoint.cpp:278
#: languages/ruby/debugger/breakpoint.cpp:135
msgid "Active"
msgstr "Aktiv"
#: languages/cpp/debugger/framestackwidget.cpp:561
#, fuzzy, c-format
msgid "Thread %1"
msgstr "Tråd"
#: languages/cpp/debugger/variablewidget.cpp:84
#: languages/ruby/debugger/debuggerpart.cpp:95
msgid "Variable Tree"
msgstr "Variabeltre"
#: languages/cpp/debugger/variablewidget.cpp:95
msgid "&Evaluate"
msgstr "B&eregn"
#: languages/cpp/debugger/variablewidget.cpp:98
msgid "&Watch"
msgstr "O&vervåk"
#: languages/cpp/debugger/variablewidget.cpp:120
msgid ""
"<b>Variable tree</b>"
"<p>The variable tree allows you to see the values of local variables and "
"arbitrary expressions."
"<p>Local variables are displayed automatically and are updated as you step "
"through your program. For each expression you enter, you can either evaluate it "
"once, or \"watch\" it (make it auto-updated). Expressions that are not "
"auto-updated can be updated manually from the context menu. Expressions can be "
"renamed to more descriptive names by clicking on the name column."
"<p>To change the value of a variable or an expression, click on the value."
msgstr ""
"<b>Variabel-tre</b>"
"<p>I variabel-treet kan du se verdier til lokale variabler og vilkårlige "
"uttrykk."
"<p>Lokale variabler vises automatisk og oppdateres etterhvert som du kjører "
"stegvis gjennom programmet. For hvert uttrykk du gir inn kan du enten beregne "
"det én gang, eller «overvåke» den (gjøre den automatisk oppdatert.) Uttrykk som "
"ikke er auto-oppdaterte kan oppdateres manuelt via kontekst-menyen. Uttrykk kan "
"gis nye, mer beskrivende navn ved å trykke på navnekolonnen. "
"<p> Trykk på verdien for å endre verdi på en variabel eller et uttrykk."
#: languages/cpp/debugger/variablewidget.cpp:134
msgid "<b>Expression entry</b><p>Type in expression to evaluate."
msgstr "<b>Tast inn uttrykk</b><p>Tast inn uttrykk som skal beregnes."
#: languages/cpp/debugger/variablewidget.cpp:138
msgid "Evaluate the expression."
msgstr "Beregn uttrykket."
#: languages/cpp/debugger/variablewidget.cpp:141
msgid "Evaluate the expression and auto-update the value when stepping."
msgstr "Beregn uttrykket og oppdater automatisk ved stegvis kjøring."
#: languages/cpp/debugger/variablewidget.cpp:272
#, fuzzy
msgid "Natural"
msgstr "Manuell"
#: languages/cpp/debugger/variablewidget.cpp:275
msgid "Hexadecimal"
msgstr "Heksadesimal"
#: languages/cpp/debugger/variablewidget.cpp:281
#, fuzzy
msgid "Character"
msgstr "Tegnkoding"
#: languages/cpp/debugger/variablewidget.cpp:284
#, fuzzy
msgid "Binary"
msgstr "GBA binær:"
#: languages/cpp/debugger/variablewidget.cpp:291
#, fuzzy
msgid "Format"
msgstr "Formaterer"
#: languages/cpp/debugger/variablewidget.cpp:301
msgid "Remember Value"
msgstr "Husk verdi"
#: languages/cpp/debugger/variablewidget.cpp:307
msgid "Remove Watch Variable"
msgstr "Slett overvåket variabel"
#: languages/cpp/debugger/variablewidget.cpp:311
msgid "Watch Variable"
msgstr "Overvåk variabel"
#: languages/cpp/debugger/variablewidget.cpp:316
msgid "Reevaluate Expression"
msgstr "Beregn uttrykk på nytt"
#: languages/cpp/debugger/variablewidget.cpp:319
msgid "Remove Expression"
msgstr "Fjern uttrykk"
#: languages/cpp/debugger/variablewidget.cpp:325
#, fuzzy
msgid "Data write breakpoint"
msgstr "Sletter det valgte stoppunktet"
#: languages/cpp/debugger/variablewidget.cpp:330
#, fuzzy
msgid "Copy Value"
msgstr "Verdi"
#: languages/cpp/debugger/variablewidget.cpp:397
msgid "Recent Expressions"
msgstr "Nylig brukte uttrykk"
#: languages/cpp/debugger/variablewidget.cpp:399
msgid "Remove All"
msgstr "Fjern alle"
#: languages/cpp/debugger/variablewidget.cpp:401
msgid "Reevaluate All"
msgstr "Beregn alle på nytt"
#: languages/cpp/debugger/variablewidget.cpp:660
#, fuzzy
msgid "Locals"
msgstr "Lokal"
#: languages/cpp/debugger/dbgpsdlg.cpp:176
#: languages/cpp/debugger/gdbcontroller.cpp:298
#: languages/cpp/debugger/variablewidget.cpp:766
#, fuzzy
msgid "Internal error"
msgstr "Intern feil"
#: languages/cpp/debugger/variablewidget.cpp:900
msgid "<b>Debugger error</b><br>"
msgstr ""
#: languages/cpp/debugger/gdbcontroller.cpp:1365
#: languages/cpp/debugger/variablewidget.cpp:901
#, fuzzy
msgid "Debugger error"
msgstr "Feilsøk-verktøylinje"
#: languages/cpp/debugger/variablewidget.cpp:1984
#: languages/ruby/debugger/variablewidget.cpp:909
msgid "Watch"
msgstr "Overvåk"
#: languages/cpp/debugger/debuggerpart.cpp:106
#: languages/ruby/debugger/debuggerpart.cpp:110
msgid "Breakpoint List"
msgstr "Stoppunkt-liste"
#: languages/cpp/debugger/debuggerpart.cpp:108
#: languages/ruby/debugger/debuggerpart.cpp:112
msgid ""
"<b>Breakpoint list</b>"
"<p>Displays a list of breakpoints with their current status. Clicking on a "
"breakpoint item allows you to change the breakpoint and will take you to the "
"source in the editor window."
msgstr ""
"<b>Stoppunkt-liste</b> "
"<p>Viser en liste ove r stoppunkter med gjeldende status. Trykk på et element "
"for å endre stoppunktet, kildekoden vises i et skrivevindu."
#: languages/cpp/debugger/debuggerpart.cpp:115
#: languages/ruby/debugger/debuggerpart.cpp:119
msgid "Breakpoints"
msgstr "Stoppunkter"
#: languages/cpp/debugger/debuggerpart.cpp:115
#: languages/ruby/debugger/debuggerpart.cpp:119
msgid "Debugger breakpoints"
msgstr "Feilsøkers stoppunkter"
#: languages/cpp/debugger/debuggerpart.cpp:121
#: languages/ruby/debugger/debuggerpart.cpp:105
msgid "Debugger variable-view"
msgstr "Feilsøkers variabel-visning"
#: languages/cpp/debugger/debuggerpart.cpp:126
#: languages/cpp/debugger/debuggerpart.cpp:137
#: languages/ruby/debugger/debuggerpart.cpp:123
#: languages/ruby/debugger/debuggerpart.cpp:134
msgid "Frame Stack"
msgstr "Stakk over funksjonskall"
#: languages/cpp/debugger/debuggerpart.cpp:128
msgid ""
"<b>Frame stack</b>"
"<p>Often referred to as the \"call stack\", this is a list showing what "
"function is currently active and who called each function to get to this point "
"in your program. By clicking on an item you can see the values in any of the "
"previous calling functions."
msgstr ""
"<b>Funksjonskall-stakk</b> "
"<p>På engelsk «Frame stack» dette er en liste som viser hvilken funksjon som "
"nå er aktiv og hvem som kalte hver funksjon for å komme til dette stedet i "
"programmet. Verdier i alle tidligere kalte funksjoner kan vises ved et trykk på "
"et element i lista."
#: languages/cpp/debugger/debuggerpart.cpp:137
msgid "Debugger function call stack"
msgstr "Feilsøkers funksjonskallstakk"
#: languages/cpp/debugger/debuggerpart.cpp:142
msgid "Machine Code Display"
msgstr "Maskinkode-visning"
#: languages/cpp/debugger/debuggerpart.cpp:144
msgid ""
"<b>Machine code display</b>"
"<p>A machine code view into your running executable with the current "
"instruction highlighted. You can step instruction by instruction using the "
"debuggers toolbar buttons of \"step over\" instruction and \"step into\" "
"instruction."
msgstr ""
"<b>Maskinkodevisning</b> "
"<p>Maskinkoden for det kjørende programmet med gjeldende instruksjon fremhevet. "
"Programmet kan kjøres instruksjon for instruksjon med knappene på feilsøkerens "
"verktøylinje «gå over » og «gå inn i» instruksjon."
#: languages/cpp/debugger/debuggerpart.cpp:152
msgid "Disassemble"
msgstr "Disassemble"
#: languages/cpp/debugger/debuggerpart.cpp:153
msgid "Debugger disassemble view"
msgstr "Feilsøkers disassemble-visning"
#: languages/cpp/debugger/debuggerpart.cpp:161
msgid ""
"<b>GDB output</b>"
"<p>Shows all gdb commands being executed. You can also issue any other gdb "
"command while debugging."
msgstr ""
"<b> GDB utdata</b> "
"<p>Viser alle gdb-kommandoer som kjøres. Du kan også gi gdb-kommandoer under "
"feilsøking."
#: languages/cpp/debugger/debuggerpart.cpp:164
msgid "GDB"
msgstr "GDB"
#: languages/cpp/debugger/debuggerpart.cpp:165
msgid "GDB output"
msgstr "GDB utdata"
#: languages/cpp/debugger/debuggerpart.cpp:179
#, fuzzy
msgid "Debug views"
msgstr "Feilsøkervisninger"
#: languages/cpp/debugger/debuggerpart.cpp:180
#, fuzzy
msgid "Special debugger views"
msgstr "Feilsøkervisninger"
#: languages/cpp/debugger/debuggerpart.cpp:192
#: languages/ruby/debugger/debuggerpart.cpp:165
msgid "Start in debugger"
msgstr "Start i feilsøker"
#: languages/cpp/debugger/debuggerpart.cpp:193
#: languages/ruby/debugger/debuggerpart.cpp:166
msgid ""
"<b>Start in debugger</b>"
"<p>Starts the debugger with the project's main executable. You may set some "
"breakpoints before this, or you can interrupt the program while it is running, "
"in order to get information about variables, frame stack, and so on."
msgstr ""
"<b>Start i feilsøker</b> "
"<p>Starter feilsøkeren med prosjektets hovedprogram. Du kan sette noen "
"stoppunkter først, eller avbryte programmet mens det kjører for å få "
"opplysninger om variabler, funksjonsstakk osv."
#: languages/cpp/debugger/debuggerpart.cpp:200
msgid "&Restart"
msgstr "&Start på nytt"
#: languages/cpp/debugger/debuggerpart.cpp:203
msgid "Restart program"
msgstr "Start programmet på nytt"
#: languages/cpp/debugger/debuggerpart.cpp:204
msgid "<b>Restarts application</b><p>Restarts applications from the beginning."
msgstr ""
"<b>Starter programmet omigjen</b>"
"<p>Starter programmet fra begynnelsen."
#: languages/cpp/debugger/debuggerpart.cpp:210
#: languages/ruby/debugger/debuggerpart.cpp:173
msgid "Sto&p"
msgstr "Sto&pp"
#: languages/cpp/debugger/debuggerpart.cpp:213
#: languages/ruby/debugger/debuggerpart.cpp:176
msgid "Stop debugger"
msgstr "Stopp feilsøker"
#: languages/cpp/debugger/debuggerpart.cpp:214
#: languages/ruby/debugger/debuggerpart.cpp:177
msgid "<b>Stop debugger</b><p>Kills the executable and exits the debugger."
msgstr ""
"<b>Stopp feilosøker</b> "
"<p>Stopper programmet og går ut av feilsøkeren."
#: languages/cpp/debugger/dbgtoolbar.cpp:302
#: languages/cpp/debugger/debuggerpart.cpp:216
#: languages/ruby/debugger/dbgtoolbar.cpp:301
#: languages/ruby/debugger/debuggerpart.cpp:179
msgid "Interrupt"
msgstr "Avbrudd"
#: languages/cpp/debugger/debuggerpart.cpp:219
#: languages/ruby/debugger/debuggerpart.cpp:182
msgid "Interrupt application"
msgstr "Avbryt programmet"
#: languages/cpp/debugger/debuggerpart.cpp:220
msgid ""
"<b>Interrupt application</b>"
"<p>Interrupts the debugged process or current GDB command."
msgstr ""
"<b>Avbryt programmet</b>"
"<p>Avbryter prosessen som feilsøkes, eller nåværende GDB-kommando."
#: languages/cpp/debugger/debuggerpart.cpp:222
#: languages/cpp/debugger/debuggerpart.cpp:499
#: languages/ruby/debugger/debuggerpart.cpp:185
msgid "Run to &Cursor"
msgstr "Kjør til &markør"
#: languages/cpp/debugger/debuggerpart.cpp:225
#: languages/ruby/debugger/debuggerpart.cpp:188
msgid "Run to cursor"
msgstr "Kjør til markør"
#: languages/cpp/debugger/debuggerpart.cpp:226
#: languages/ruby/debugger/debuggerpart.cpp:189
msgid ""
"<b>Run to cursor</b>"
"<p>Continues execution until the cursor position is reached."
msgstr ""
"<b>Kjør til markør</b> "
"<p>Fortsetter programkjøringen til markørposisjonen er nådd."
#: languages/cpp/debugger/debuggerpart.cpp:229
msgid "Set E&xecution Position to Cursor"
msgstr "Sett &kjøringsposisjon ved markøren"
#: languages/cpp/debugger/debuggerpart.cpp:232
msgid "Jump to cursor"
msgstr "Hopp til markøren"
#: languages/cpp/debugger/debuggerpart.cpp:233
msgid ""
"<b>Set Execution Position </b>"
"<p>Set the execution pointer to the current cursor position."
msgstr "<b>Sett kjøringsposisjon </b><p>Sett programpeker der markøren står."
#: languages/cpp/debugger/debuggerpart.cpp:236
#: languages/ruby/debugger/debuggerpart.cpp:192
msgid "Step &Over"
msgstr "Gå &over"
#: languages/cpp/debugger/debuggerpart.cpp:239
#: languages/ruby/debugger/debuggerpart.cpp:195
msgid "Step over the next line"
msgstr "Gå over neste linje"
#: languages/cpp/debugger/debuggerpart.cpp:240
msgid ""
"<b>Step over</b>"
"<p>Executes one line of source in the current source file. If the source line "
"is a call to a function the whole function is executed and the app will stop at "
"the line following the function call."
msgstr ""
"<b>Gå over</b> <o>Utfører en linje av kildekoden i gjeldende kildekodefil. Hvis "
"linja er et kall til en funksjon, kjøres hele funksjonen og kjøringen stopper "
"på linja etter funksjonskallet."
#: languages/cpp/debugger/debuggerpart.cpp:247
msgid "Step over Ins&truction"
msgstr "Gå over ins&truksjon"
#: languages/cpp/debugger/debuggerpart.cpp:250
msgid "Step over instruction"
msgstr "Gå over instruksjon"
#: languages/cpp/debugger/debuggerpart.cpp:251
msgid ""
"<b>Step over instruction</b>"
"<p>Steps over the next assembly instruction."
msgstr "<b>Gå over instruksjon</b> <p>Går over neste assembly-instruksjon."
#: languages/cpp/debugger/debuggerpart.cpp:254
#: languages/ruby/debugger/debuggerpart.cpp:203
msgid "Step &Into"
msgstr "Gå &inn i"
#: languages/cpp/debugger/debuggerpart.cpp:257
#: languages/ruby/debugger/debuggerpart.cpp:206
msgid "Step into the next statement"
msgstr "Gå inn i neste setning"
#: languages/cpp/debugger/debuggerpart.cpp:258
msgid ""
"<b>Step into</b>"
"<p>Executes exactly one line of source. If the source line is a call to a "
"function then execution will stop after the function has been entered."
msgstr ""
"<b>Gå inn i</b> "
"<p>Kjører akkurat en linje av kildekoden. Hvis linja er et kall til en funksjon "
"vil kjøringen stoppe etter at funksjonen er kalt."
#: languages/cpp/debugger/debuggerpart.cpp:264
msgid "Step into I&nstruction"
msgstr "Gå inn i &instruksjon"
#: languages/cpp/debugger/debuggerpart.cpp:267
msgid "Step into instruction"
msgstr "Gå inn i instruksjon"
#: languages/cpp/debugger/debuggerpart.cpp:268
msgid ""
"<b>Step into instruction</b>"
"<p>Steps into the next assembly instruction."
msgstr "<b>Gå inn i instruksjon</b><p>Går inn i neste assembly-instruksjon."
#: languages/cpp/debugger/debuggerpart.cpp:271
#: languages/ruby/debugger/debuggerpart.cpp:214
msgid "Step O&ut"
msgstr "Gå &ut"
#: languages/cpp/debugger/debuggerpart.cpp:274
msgid "Steps out of the current function"
msgstr "Går ut av gjeldende funksjon"
#: languages/cpp/debugger/debuggerpart.cpp:275
msgid ""
"<b>Step out</b>"
"<p>Executes the application until the currently executing function is "
"completed. The debugger will then display the line after the original call to "
"that function. If program execution is in the outermost frame (i.e. in main()) "
"then this operation has no effect."
msgstr ""
"<b>Gå ut</b> "
"<p>Kjører programmet til gjeldende funksjon er ferdig. Feilsøkeren viser "
"deretter linja etter kallet til den funksjonen. Hvis programkjøringen er på "
"høyeste nivå (dvs. i main() ) så har denne handllingen ingen virkning."
#: languages/cpp/debugger/dbgtoolbar.cpp:309
#: languages/cpp/debugger/debuggerpart.cpp:283
msgid "Viewers"
msgstr "Framvisere"
#: languages/cpp/debugger/debuggerpart.cpp:286
msgid "Debugger viewers"
msgstr "Feilsøkervisninger"
#: languages/cpp/debugger/debuggerpart.cpp:287
msgid ""
"<b>Debugger viewers</b>"
"<p>Various information about application being executed. There are 4 views "
"available:"
"<br><b>Memory</b>"
"<br><b>Disassemble</b>"
"<br><b>Registers</b>"
"<br><b>Libraries</b>"
msgstr ""
"<b>Feilsøkervisninger</b> "
"<p>Forskjellig informasjon om programmet som kjøres. Det er 4 mulige visninger: "
"<br><b>Minne</b> "
"<br><b>Disassemble</b>"
"<br><b>Registre</b>"
"<br><b>Biblioteker</b>"
#: languages/cpp/debugger/debuggerpart.cpp:294
msgid "Examine Core File..."
msgstr "Undersøk core-fil …"
#: languages/cpp/debugger/debuggerpart.cpp:297
msgid "Examine core file"
msgstr "Undersøk core-fil"
#: languages/cpp/debugger/debuggerpart.cpp:298
msgid ""
"<b>Examine core file</b>"
"<p>This loads a core file, which is typically created after the application has "
"crashed, e.g. with a segmentation fault. The core file contains an image of the "
"program memory at the time it crashed, allowing you to do a post-mortem "
"analysis."
msgstr ""
"<b>Undersøk core-fil</b> "
"<p>Dette laster inn en core-fil, som oftest lages etter at et program har "
"krasjet f.eks. med en minnefeil. Core-fila inneholder et bilde av "
"program-minnet på krasjtidspunktet, slik at det kan gjøres en feilsøking."
#: languages/cpp/debugger/dbgpsdlg.cpp:59
#: languages/cpp/debugger/debuggerpart.cpp:306
#: languages/ruby/debugger/dbgpsdlg.cpp:61
msgid "Attach to Process"
msgstr "Koble til prosess"
#: languages/cpp/debugger/debuggerpart.cpp:309
msgid "Attach to process"
msgstr "Koble til en prosess"
#: languages/cpp/debugger/debuggerpart.cpp:310
msgid "<b>Attach to process</b><p>Attaches the debugger to a running process."
msgstr ""
"<b>Koble til prosess</b>"
"<p>Kobler feilsøkeren til en prosess som kjører."
#: languages/cpp/debugger/debuggerpart.cpp:312
#: languages/cpp/debugger/debuggerpart.cpp:509
#: languages/ruby/debugger/debuggerpart.cpp:226
#: languages/ruby/debugger/debuggerpart.cpp:314
msgid "Toggle Breakpoint"
msgstr "Slå stoppunkt av/på"
#: languages/cpp/debugger/debuggerpart.cpp:315
#: languages/ruby/debugger/debuggerpart.cpp:229
msgid "Toggle breakpoint"
msgstr "Slå et stoppunkt av/på"
#: languages/cpp/debugger/debuggerpart.cpp:316
#: languages/ruby/debugger/debuggerpart.cpp:230
msgid ""
"<b>Toggle breakpoint</b>"
"<p>Toggles the breakpoint at the current line in editor."
msgstr ""
"<b>Slå stoppunkt av/på</b> "
"<p> Slår stoppunktet ved gjeldende linje i tekstfeltet av eller på."
#: languages/cpp/debugger/debuggerpart.cpp:399
#, fuzzy
msgid "Debug in &TDevelop"
msgstr "Feilsøk i &KDevelop"
#: languages/cpp/debugger/debuggerpart.cpp:513
#: languages/ruby/debugger/debuggerpart.cpp:315
msgid "<b>Toggle breakpoint</b><p>Toggles breakpoint at the current line."
msgstr ""
"<b>Slå stoppunkt av/på</b>"
"<p>Slår stoppunktet ved gjeldende linje av eller på."
#: languages/cpp/debugger/debuggerpart.cpp:518
#, c-format
msgid "Evaluate: %1"
msgstr "Beregn: %1"
#: languages/cpp/debugger/debuggerpart.cpp:522
msgid ""
"<b>Evaluate expression</b>"
"<p>Shows the value of the expression under the cursor."
msgstr "<b>Beregn uttrykk</b><p>Viser verdien av uttrykket under markøren."
#: languages/cpp/debugger/debuggerpart.cpp:523
#: languages/ruby/debugger/debuggerpart.cpp:320
#, c-format
msgid "Watch: %1"
msgstr "Overvåk: %1"
#: languages/cpp/debugger/debuggerpart.cpp:527
msgid ""
"<b>Watch expression</b>"
"<p>Adds an expression under the cursor to the Variables/Watch list."
msgstr ""
"<b>Overvåk uttrykk</b>"
"<p>Legger til uttrykket under markøren til overvåkingslista."
#: languages/cpp/debugger/debuggerpart.cpp:563
msgid "Debugger"
msgstr "Feilsøker"
#: languages/cpp/debugger/debuggerpart.cpp:662
#: languages/ruby/debugger/debuggerpart.cpp:481
msgid "Could not locate the debugging shell '%1'."
msgstr "Klarte ikke finne feilsøkerskallet «%1»."
#: languages/cpp/debugger/debuggerpart.cpp:663
#: languages/ruby/debugger/debuggerpart.cpp:482
msgid "Debugging Shell Not Found"
msgstr "Feilsøkerskallet ble ikke funnet"
#: languages/cpp/debugger/debuggerpart.cpp:676
#: languages/cpp/debugger/debuggerpart.cpp:916
#: languages/ruby/debugger/debuggerpart.cpp:492
#: languages/ruby/debugger/debuggerpart.cpp:603
msgid "&Continue"
msgstr "&Fortsett"
#: languages/cpp/debugger/debuggerpart.cpp:679
#: languages/cpp/debugger/debuggerpart.cpp:917
#: languages/ruby/debugger/debuggerpart.cpp:494
#: languages/ruby/debugger/debuggerpart.cpp:604
msgid "Continues the application execution"
msgstr "Fortsetter programkjøringen"
#: languages/cpp/debugger/debuggerpart.cpp:681
#: languages/cpp/debugger/debuggerpart.cpp:918
#: languages/ruby/debugger/debuggerpart.cpp:495
#: languages/ruby/debugger/debuggerpart.cpp:605
msgid ""
"Continue application execution\n"
"\n"
"Continues the execution of your application in the debugger. This only takes "
"effect when the application has been halted by the debugger (i.e. a breakpoint "
"has been activated or the interrupt was pressed)."
msgstr ""
"Fortsett programkjøring\n"
"\n"
"Fortsetter å kjøre programmet i feilsøkeren. Dette har bare virkning hvis "
"programmet ble stoppet av feilsøkeren (dvs. kom til et stopp-punkt eller det "
"ble trykket på Avbryt)."
#: languages/cpp/debugger/debuggerpart.cpp:743
#: languages/ruby/debugger/debuggerpart.cpp:572
msgid "Runs the program in the debugger"
msgstr "Kjører programmet i feilsøkeren"
#: languages/cpp/debugger/debuggerpart.cpp:744
#: languages/ruby/debugger/debuggerpart.cpp:573
msgid ""
"Start in debugger\n"
"\n"
"Starts the debugger with the project's main executable. You may set some "
"breakpoints before this, or you can interrupt the program while it is running, "
"in order to get information about variables, frame stack, and so on."
msgstr ""
"Start i feilsøker\n"
"\n"
"Starter feilsøkeren med prosjektets hovedprogram. Du kan sette noen brytpunkter "
"før dette, eller du kan avbryte programmet mens det kjører for å få informasjon "
"om variabler, stakkramme osv."
#: languages/cpp/debugger/debuggerpart.cpp:771
msgid ""
"<b>GDB exited abnormally</b>"
"<p>This is likely a bug in GDB. Examine the gdb output window and then stop the "
"debugger"
msgstr ""
"<b>GDB avsluttet unormalt</b>"
"<p>Dette er antakelig en feil i GDB. Undersøk gdbs utdatavindu og stopp "
"deretter feilsøkeren"
#: languages/cpp/debugger/debuggerpart.cpp:774
msgid "GDB exited abnormally"
msgstr "GDB avsluttet unormalt"
#: languages/cpp/debugger/debuggerpart.cpp:834
#: languages/cpp/debugger/debuggerpart.cpp:836
#, fuzzy
msgid "Rebuild the project?"
msgstr "Bygg prosjektet på nytt"
#: languages/cpp/debugger/debuggerpart.cpp:835
msgid "<p>The project is out of date. Rebuild it?"
msgstr ""
#: languages/cpp/debugger/debuggerpart.cpp:888
#: languages/ruby/debugger/debuggerpart.cpp:611
msgid "Continuing program"
msgstr "Fortsetter programmet"
#: languages/cpp/debugger/debuggerpart.cpp:902
#: languages/ruby/debugger/debuggerpart.cpp:597
msgid "Debugging program"
msgstr "Feilsøker programmet"
#: languages/cpp/debugger/debuggerpart.cpp:924
msgid "Running program"
msgstr "Kjører programmet"
#: languages/cpp/debugger/debuggerpart.cpp:951
msgid "Choose a core file to examine..."
msgstr "Velg en core-fil å undersøke …"
#: languages/cpp/debugger/debuggerpart.cpp:958
#, c-format
msgid "Examining core file %1"
msgstr "Ser på core-fil %1"
#: languages/cpp/debugger/debuggerpart.cpp:967
msgid "Choose a process to attach to..."
msgstr "Velg en prosess å koble til …"
#: languages/cpp/debugger/debuggerpart.cpp:979
#, c-format
msgid "Attaching to process %1"
msgstr "Kobler til prosess %1"
#: languages/cpp/debugger/debuggerpart.cpp:1139
msgid ""
"_: To start something\n"
"Start"
msgstr "Start"
#: languages/cpp/debugger/debuggerpart.cpp:1140
#: languages/ruby/debugger/debuggerpart.cpp:707
msgid "Restart the program in the debugger"
msgstr "Omstart programmet i feilsøkeren"
#: languages/cpp/debugger/debuggerpart.cpp:1141
#: languages/ruby/debugger/debuggerpart.cpp:708
msgid ""
"Restart in debugger\n"
"\n"
"Restarts the program in the debugger"
msgstr ""
"Omstart i feilsøker\n"
"\n"
"Starter programmet omigjen i feilsøkeren"
#: languages/cpp/debugger/stty.cpp:332 languages/ruby/debugger/stty.cpp:316
msgid "tdevelop: Debug application console"
msgstr "tdevelop: Feilsøkerkonsoll"
#: languages/cpp/debugger/memviewdlg.cpp:94
#, fuzzy
msgid "Start"
msgstr "&Start:"
#: languages/cpp/debugger/memviewdlg.cpp:100
#, fuzzy
msgid "Amount"
msgstr "&Ant"
#: languages/cpp/debugger/memviewdlg.cpp:139
#, fuzzy
msgid "Memory view"
msgstr "Minnevisning:"
#: languages/cpp/debugger/memviewdlg.cpp:346
#, fuzzy
msgid "Change memory range"
msgstr "Endre egenskapsnavn"
#: languages/cpp/debugger/memviewdlg.cpp:355
#, fuzzy
msgid "Close this view"
msgstr "Lukk andre filer"
#: languages/cpp/debugger/dbgpsdlg.cpp:173
msgid ""
"<b>Could not parse output from the <tt>ps</tt> command.</b>"
"<p>The following line could not be parsed:<b><tt>%1</tt>"
msgstr ""
#: languages/cpp/debugger/gdboutputwidget.cpp:57
msgid "&GDB cmd:"
msgstr "&GDB kmd:"
#: languages/cpp/debugger/gdboutputwidget.cpp:73
msgid "Pause execution of the app to enter gdb commands"
msgstr "Stopp kjøring av programmet for å angi gdb-kommandoer"
#: languages/cpp/debugger/gdboutputwidget.cpp:326
msgid "Show Internal Commands"
msgstr ""
#: languages/cpp/debugger/gdboutputwidget.cpp:334
msgid ""
"Controls if commands issued internally by KDevelop will be shown or not."
"<br>This option will affect only future commands, it will not add or remove "
"already issued commands from the view."
msgstr ""
#: languages/cpp/debugger/gdboutputwidget.cpp:339
#, fuzzy
msgid "Copy All"
msgstr "Lukk alle"
#: languages/cpp/debugger/dbgtoolbar.cpp:112
#: languages/cpp/debugger/dbgtoolbar.cpp:245
#: languages/ruby/debugger/dbgtoolbar.cpp:118
#: languages/ruby/debugger/dbgtoolbar.cpp:244
msgid "Debug Toolbar"
msgstr "Feilsøk-verktøylinje"
#: languages/cpp/debugger/dbgtoolbar.cpp:113
#: languages/ruby/debugger/dbgtoolbar.cpp:119
msgid "Dock to Panel"
msgstr "Dokk i panel"
#: languages/cpp/debugger/dbgtoolbar.cpp:115
#: languages/ruby/debugger/dbgtoolbar.cpp:121
#, fuzzy
msgid "Dock to Panel && Iconify TDevelop"
msgstr "Dokk i panel og ikoniser KDevelop"
#: languages/cpp/debugger/dbgtoolbar.cpp:225
#, fuzzy
msgid "TDevelop debugger: Click to execute one line of code (\"step\")"
msgstr "KDevelop-feilsøker: Klikk for å utføre en linje med kode (ett steg)"
#: languages/cpp/debugger/dbgtoolbar.cpp:246
#: languages/ruby/debugger/dbgtoolbar.cpp:245
msgid "Activate"
msgstr "Skru på"
#: languages/cpp/debugger/dbgtoolbar.cpp:247
#: languages/ruby/debugger/dbgtoolbar.cpp:246
#, fuzzy
msgid "Activate (TDevelop gets focus)"
msgstr "Skru på (KDevelop får fokus)"
#: languages/cpp/debugger/dbgtoolbar.cpp:307
#: languages/ruby/debugger/dbgtoolbar.cpp:304
msgid "Step Out"
msgstr "Gå ut"
#: languages/cpp/debugger/dbgtoolbar.cpp:308
#: languages/ruby/debugger/dbgtoolbar.cpp:305
msgid "Run to Cursor"
msgstr "Kjør til markør"
#: languages/cpp/debugger/dbgtoolbar.cpp:325
#: languages/ruby/debugger/dbgtoolbar.cpp:318
msgid "Continue with application execution, may start the application"
msgstr "Fortsett med programkjøring, kan starte programmet"
#: languages/cpp/debugger/dbgtoolbar.cpp:326
#: languages/ruby/debugger/dbgtoolbar.cpp:319
msgid "Interrupt the application execution"
msgstr "Avbryt programkjøring"
#: languages/cpp/debugger/dbgtoolbar.cpp:327
msgid "Execute one line of code, but run through functions"
msgstr "Utfør en linje med kode, men kjør gjennom funksjoner"
#: languages/cpp/debugger/dbgtoolbar.cpp:328
msgid "Execute one assembler instruction, but run through functions"
msgstr "Utfør en en assemblerinstruksjon, men kjør gjennom funksjoner"
#: languages/cpp/debugger/dbgtoolbar.cpp:329
msgid "Execute one line of code, stepping into functions if appropriate"
msgstr "Utfør en linje med kode, gå inn i funksjoner hvis det passer"
#: languages/cpp/debugger/dbgtoolbar.cpp:330
msgid ""
"Execute one assembler instruction, stepping into functions if appropriate"
msgstr "Utfør én assemblerinstruksjon, gå inn i funksjoner hvis det passer"
#: languages/cpp/debugger/dbgtoolbar.cpp:331
#: languages/ruby/debugger/dbgtoolbar.cpp:322
msgid "Execute to end of current stack frame"
msgstr "Kjør til slutten av gjeldende stakk-ramme"
#: languages/cpp/debugger/dbgtoolbar.cpp:332
#: languages/cpp/debugger/dbgtoolbar.cpp:344
#: languages/ruby/debugger/dbgtoolbar.cpp:323
#: languages/ruby/debugger/dbgtoolbar.cpp:334
msgid "Continues execution until the cursor position is reached."
msgstr "Fortsetter kjøring fram til gjeldende markørposisjon."
#: languages/cpp/debugger/dbgtoolbar.cpp:333
msgid "Memory, dissemble, registers, library viewers"
msgstr "Minne, dissemble, registre, biblioteksvisere"
#: languages/cpp/debugger/dbgtoolbar.cpp:334
#: languages/ruby/debugger/dbgtoolbar.cpp:324
#, fuzzy
msgid "Set focus on TDevelop"
msgstr "Sett fokus på KDevelop"
#: languages/cpp/debugger/dbgtoolbar.cpp:335
#: languages/ruby/debugger/dbgtoolbar.cpp:325
#, fuzzy
msgid "Set focus on window that had focus when TDevelop got focus"
msgstr "Sett fokus på det vinduet som hadde fokus da KDevelop fikk fokus"
#: languages/cpp/debugger/dbgtoolbar.cpp:337
#: languages/ruby/debugger/dbgtoolbar.cpp:327
msgid "Continue with application execution. May start the application."
msgstr "Fortsett med programkjøring. Kan starte programmet."
#: languages/cpp/debugger/dbgtoolbar.cpp:338
#: languages/ruby/debugger/dbgtoolbar.cpp:328
msgid "Interrupt the application execution."
msgstr "Avbryt programkjøringen."
#: languages/cpp/debugger/dbgtoolbar.cpp:339
msgid "Execute one line of code, but run through functions."
msgstr "Utfør en linje med kode, men kjør gjennom funksjoner."
#: languages/cpp/debugger/dbgtoolbar.cpp:340
msgid "Execute one assembler instruction, but run through functions."
msgstr "Utfør en en assemblerinstruksjon, men kjør gjennom funksjoner."
#: languages/cpp/debugger/dbgtoolbar.cpp:341
msgid "Execute one line of code, stepping into functions if appropriate."
msgstr "Utfør en linje med kode, gå inn i funksjoner hvis det passer."
#: languages/cpp/debugger/dbgtoolbar.cpp:342
msgid ""
"Execute one assembler instruction, stepping into functions if appropriate."
msgstr "Utfør én assemblerinstruksjon, gå inn i funksjoner hvis det passer."
#: languages/cpp/debugger/dbgtoolbar.cpp:343
#: languages/ruby/debugger/dbgtoolbar.cpp:333
msgid "Execute to end of current stack frame."
msgstr "Utfør til slutten av gjeldende stakk-ramme."
#: languages/cpp/debugger/dbgtoolbar.cpp:345
msgid "Memory, dissemble, registers, library viewers."
msgstr "Minne, dissemble, registre, biblioteksvisere."
#: languages/cpp/debugger/dbgtoolbar.cpp:346
#: languages/ruby/debugger/dbgtoolbar.cpp:335
#, fuzzy
msgid "Set focus on TDevelop."
msgstr "Sett fokus på KDevelop."
#: languages/cpp/debugger/dbgtoolbar.cpp:347
#: languages/ruby/debugger/dbgtoolbar.cpp:336
#, fuzzy
msgid "Set focus on window that had focus when TDevelop got focus."
msgstr "Sett fokus på det vinduet som hadde fokus da KDevelop fikk fokus."
#: languages/cpp/debugger/gdbcontroller.cpp:296
#, c-format
msgid ""
"<b>Gdb command sent when debugger is not running</b>"
"<br>The command was:"
"<br> %1"
msgstr ""
#: languages/cpp/debugger/gdbcontroller.cpp:391
msgid "<b>Invalid debugger command</b><br>"
msgstr ""
#: languages/cpp/debugger/gdbcontroller.cpp:393
msgid "Invalid debugger command"
msgstr ""
#: languages/cpp/debugger/gdbcontroller.cpp:484
msgid ""
"<b>Invalid gdb reply</b>"
"<p>The 'stopped' packet does not include the 'reason' field'."
msgstr ""
#: languages/cpp/debugger/gdbcontroller.cpp:486
msgid "The gdb reply is: bla-bla-bla"
msgstr ""
#: languages/cpp/debugger/gdbcontroller.cpp:487
#: languages/cpp/debugger/gdbcontroller.cpp:722
msgid "Invalid gdb reply"
msgstr ""
#: languages/cpp/debugger/gdbcontroller.cpp:502
#, fuzzy, c-format
msgid "Exited on signal %1"
msgstr "Legg til nytt signal"
#: languages/cpp/debugger/gdbcontroller.cpp:556
msgid "Program received signal %1 (%2)"
msgstr ""
#: languages/cpp/debugger/gdbcontroller.cpp:558
#, fuzzy
msgid "Received signal"
msgstr "Slett signal"
#: languages/cpp/debugger/gdbcontroller.cpp:649
msgid ""
"gdb message:\n"
msgstr ""
"gdb-melding:\n"
#: languages/cpp/debugger/gdbcontroller.cpp:691
msgid "No such file or directory."
msgstr "Ingen slik fil eller katalog."
#: languages/cpp/debugger/gdbcontroller.cpp:715
msgid ""
"Invalid gdb reply\n"
"Command was: %1\n"
"Response is: %2\n"
"Invalid response kind: \"%3\""
msgstr ""
#: languages/cpp/debugger/gdbcontroller.cpp:846
msgid ""
"<b>Could not start debugger.</b>"
"<p>Could not run '%1'. Make sure that the path name is specified correctly."
msgstr ""
"<b>Klarte ikke starte feilsøkeren.</b>"
"<p> Klarte ikke kjøre «%1». Pass på at stien er oppgitt riktig."
#: languages/cpp/debugger/gdbcontroller.cpp:850
msgid "Could not start debugger"
msgstr "Klarte ikke starte feilsøker"
#: languages/cpp/debugger/gdbcontroller.cpp:1046
#: languages/ruby/debugger/rdbcontroller.cpp:836
msgid "Debugger stopped"
msgstr "Feilsøker stoppet"
#: languages/cpp/debugger/gdbcontroller.cpp:1111
msgid ""
"GDB cannot use the tty* or pty* devices.\n"
"Check the settings on /dev/tty* and /dev/pty*\n"
"As root you may need to \"chmod ug+rw\" tty* and pty* devices and/or add the "
"user to the tty group using \"usermod -G tty username\"."
msgstr ""
"gdb kan ikke brukte tty*- eller pty*-enheter.\n"
"Sjekk innstillingene til /dev/tty* og /dev/pty*\n"
"\n"
"Det kan hende at du må kjøre «chmod ug+rw» som root på\n"
"tty*- og pty*-enhetene og/eller legge til brukeren til tty-\n"
"gruppen ved å bruke «usermod -G tty brukernavn»."
#: languages/cpp/debugger/gdbcontroller.cpp:1157
msgid ""
"<b>Application does not exist</b>"
"<p>The application you are trying to debug,"
"<br> %1\n"
"<br>does not exist. Check that you have specified the right application in the "
"debugger configuration."
msgstr ""
#: languages/cpp/debugger/gdbcontroller.cpp:1163
#, fuzzy
msgid "Application does not exist"
msgstr "Den valgte revisjonen finnes ikke."
#: languages/cpp/debugger/gdbcontroller.cpp:1175
msgid ""
"<b>Could not run application '%1'.</b>"
"<p>The application does not have the executable bit set. Try rebuilding the "
"project, or change permissions manually."
msgstr ""
"<b>Klarte ikke kjøre programmet «%1».</b>"
"<p>Programfila har ikke satt kjørbar-biten. Forsøk å bygge prosjektet på nytt, "
"eller endre tillatelsen manuelt."
#: languages/cpp/debugger/gdbcontroller.cpp:1180
msgid "Could not run application"
msgstr "Klarte ikke kjøre programmet"
#: languages/cpp/debugger/gdbcontroller.cpp:1355
#: languages/cpp/debugger/gdbcontroller.cpp:1725
#: languages/ruby/debugger/rdbcontroller.cpp:1286
msgid "Process exited"
msgstr "Prosess avsluttet"
#: languages/cpp/debugger/gdbcontroller.cpp:1362
msgid "<b>Debugger error</b><p>Debugger reported the following error:<p><tt>"
msgstr ""
#: languages/cpp/debugger/gdbcontroller.cpp:1590
msgid ""
"_: <b>Internal debugger error</b>\n"
"<p>The debugger component encountered an internal error while processing a "
"reply from gdb. Please submit a bug report."
msgstr ""
#: languages/cpp/debugger/gdbcontroller.cpp:1592
msgid ""
"The exception is: %1\n"
"The MI response is: %2"
msgstr ""
#: languages/cpp/debugger/gdbcontroller.cpp:1594
#, fuzzy
msgid "Internal debugger error"
msgstr "Intern feil"
#: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:41
#: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:41
msgid "WHAT DOES THIS PART DO?"
msgstr "HVA GJØR DENNE DELEN?"
#: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:94
#: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:94
msgid "&Do Something..."
msgstr "&Gjør noe …"
#: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:96
#: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:96
msgid "Do something"
msgstr "Gjør noe"
#: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:97
#: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:97
msgid "<b>Do something</b><p>Describe here what does this action do."
msgstr "<b>Gjør noe</b><p>Beskriv her hva denne handlinga gjør."
#: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:180
#: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:180
msgid "This action does nothing."
msgstr "Denne handlinga gjør ingenting."
#: languages/cpp/app_templates/kdevpart/kdevpart_part.cpp:180
#: languages/cpp/app_templates/kdevpart2/kdevpart_part.cpp:180
msgid "%{APPNAME} Plugin"
msgstr "%{APPNAME} tilleggsmodul"
#: languages/cpp/app_templates/dcopservice/main.cpp:12
#: languages/cpp/app_templates/kdedcop/main.cpp:10
#: languages/cpp/app_templates/khello/main.cpp:10
#: languages/cpp/app_templates/khello2/main.cpp:10
#: languages/cpp/app_templates/kpartapp/main.cpp:9
msgid "A TDE KPart Application"
msgstr "Et TDE Kpart Program"
#: languages/cpp/app_templates/dcopservice/main.cpp:24
msgid "TDE"
msgstr "TDE"
#: languages/cpp/app_templates/dcopservice/main.cpp:27
msgid "Developer"
msgstr "Utvikler"
#: languages/cpp/app_templates/kateplugin/plugin_app.cpp:57
#: languages/cpp/app_templates/kateplugin2/plugin_app.cpp:61
msgid "Insert Hello World"
msgstr "Sett inn hallo, verden"
#: languages/cpp/app_templates/tdefileplugin/tdefile_plugin.cpp:26
msgid "%{APPNAME} Information"
msgstr "%{APPNAME}-informasjon"
#: languages/cpp/app_templates/tdefileplugin/tdefile_plugin.cpp:31
msgid "Items"
msgstr "Elementer"
#: languages/cpp/app_templates/kde4app/kapp4.cpp:56
#: languages/cpp/app_templates/kscons_kxt/app.cpp:79
#: languages/cpp/app_templates/kxt/app.cpp:74
#: languages/cpp/app_templates/tdeconfig35/app.cpp:56
msgid "Swi&tch Colors"
msgstr "By&tt farger"
#: languages/cpp/app_templates/kde4app/main.cpp:10
#, fuzzy
msgid "A KDE 4 Application"
msgstr "Et TDE-program"
#: languages/cpp/app_templates/kde4app/kapp4view.cpp:39
#: languages/cpp/app_templates/kscons_kxt/appview.cpp:37
#: languages/cpp/app_templates/kxt/appview.cpp:37
#: languages/cpp/app_templates/tdeconfig35/appview.cpp:37
msgid "Settings changed"
msgstr "Endrede innstillinger"
#: languages/cpp/app_templates/kscons_kxt/appview.cpp:36
#: languages/cpp/app_templates/kxt/appview.cpp:36
#: languages/cpp/app_templates/tdeconfig35/appview.cpp:36
msgid "This project is %1 days old"
msgstr "Dette prosjektet er %1 dager gammelt"
#: languages/cpp/app_templates/kapp/main.cpp:11
#: languages/cpp/app_templates/kmake/app.cpp:8
#: languages/cpp/app_templates/kscons_kxt/main.cpp:10
#: languages/cpp/app_templates/kxt/main.cpp:10
#: languages/cpp/app_templates/tdeconfig35/main.cpp:10
msgid "A TDE Application"
msgstr "Et TDE-program"
#: languages/cpp/app_templates/kapp/main.cpp:17
#: languages/cpp/app_templates/kmake/app.cpp:14
#: languages/cpp/app_templates/kpartapp/main.cpp:15
#: languages/cpp/app_templates/kscons_kxt/main.cpp:16
#: languages/cpp/app_templates/kscons_tdemdi/main.cpp:18
#: languages/cpp/app_templates/kxt/main.cpp:16
#: languages/cpp/app_templates/tdeconfig35/main.cpp:16
msgid "Document to open"
msgstr "Dokument som skal åpnes"
#: languages/cpp/app_templates/kscons_kxt/app.cpp:72
#: languages/cpp/app_templates/kscons_tdemdi/apptdemdi.cpp:130
msgid "This shows useful tips on the use of this application."
msgstr "Viser nyttige tips om bruken av programmet."
#: languages/bash/bashsupport_part.cpp:46
#: languages/cpp/app_templates/kdevlang/kdevlang_part.cpp:31
#: languages/kjssupport/kjssupport_part.cpp:72
#: languages/php/phpsupportpart.cpp:91 languages/ruby/rubysupport_part.cpp:51
#: languages/sql/sqlsupport_part.cpp:43
msgid "&Run"
msgstr "&Kjør"
#: languages/cpp/app_templates/kofficepart/main.cpp:17
msgid "File to open"
msgstr "Åpne fil"
#: languages/cpp/app_templates/kicker/applet.cpp:33
msgid "This is an about box"
msgstr "Dette er en Om-boks"
#: languages/cpp/app_templates/kicker/applet.cpp:39
msgid "This is a help box"
msgstr "Dette er en hjelp-boks"
#: languages/cpp/app_templates/kicker/applet.cpp:45
msgid "This is a preferences box"
msgstr "Dette er en innstillingsboks"
#: languages/cpp/app_templates/tdecmodule/module.cpp:62
msgid "Helpful information about the %{APPNAMELC} module."
msgstr "Nyttig informasjon om %{APPNAMELC}-modulen."
#: languages/cpp/app_templates/tdeioslave/slave.cpp:51
#: vcs/subversion/svn_tdeio.cpp:249
msgid "Looking for %1..."
msgstr "Ser etter %1 …"
#: languages/cpp/app_templates/kmake/mainviewimp.cpp:17
msgid "Hello there."
msgstr "Hei der."
#: languages/cpp/app_templates/kpartapp/app_part.cpp:185
msgid "%{APPNAME}Part"
msgstr "%{APPNAME}Part"
#: languages/cpp/app_templates/kpartapp/app.cpp:55
#: languages/cpp/app_templates/kscons_tdemdi/apptdemdiView.cpp:46
#: languages/cpp/app_templates/kscons_tdemdi/apptdemdiView.cpp:53
msgid "Could not find our part."
msgstr "Klarte ikke finne vår del."
#: languages/cpp/app_templates/noatunui/plugin_impl.cpp:50
msgid "Play"
msgstr "Spill"
#: languages/cpp/app_templates/noatunui/plugin_impl.cpp:63
msgid "Playlist"
msgstr "Spilleliste"
#: languages/cpp/app_templates/noatunui/plugin_impl.cpp:69
msgid "Change loop style"
msgstr "Skift løkke-stil"
#: languages/cpp/app_templates/noatunui/plugin_impl.cpp:98
#: languages/cpp/app_templates/noatunui/plugin_impl.cpp:206
msgid "No File Loaded"
msgstr "Ingen fil lastet"
#: languages/cpp/app_templates/noatunui/plugin_impl.cpp:251
msgid "No looping"
msgstr "Ingen repetisjon"
#: languages/cpp/app_templates/noatunui/plugin_impl.cpp:255
msgid "Song looping"
msgstr "Stykke-løkke"
#: languages/cpp/app_templates/noatunui/plugin_impl.cpp:259
msgid "Playlist looping"
msgstr "Spilleliste-løkke"
#: languages/cpp/app_templates/noatunui/plugin_impl.cpp:263
msgid "Random play"
msgstr "Spill i tilfeldig rekkefølge"
#: languages/cpp/app_templates/kpartplugin/plugin_app.cpp:16
msgid "&Plugin Action"
msgstr "Handling for &tilleggsmodul"
#: languages/cpp/app_templates/kpartplugin/plugin_app.cpp:32
msgid "Cannot Translate Source"
msgstr "Kan ikke oversette kilde"
#: languages/cpp/app_templates/kpartplugin/plugin_app.cpp:33
msgid "You cannot translate anything except web pages with this plugin."
msgstr "Du kan ikke oversette annet enn nettsider med denne tilleggsmodulen."
#: languages/cpp/app_templates/kpartplugin/plugin_app.cpp:53
msgid "The URL you entered is not valid, please correct it and try again"
msgstr "URL-en som ble oppgitt er ikke gyldig, rett den og forsøk igjen"
#: languages/cpp/app_templates/kapp/appview.cpp:62
msgid "Could not find a suitable HTML component"
msgstr "Fant ingen passende HTML-komponent"
#: languages/cpp/app_templates/kapp/pref.cpp:11
msgid "%{APPNAME} Preferences"
msgstr "Innstillinger for %{APPNAME}"
#: languages/cpp/app_templates/kapp/pref.cpp:18
msgid "First Page"
msgstr "Første side"
#: languages/cpp/app_templates/kapp/pref.cpp:18
msgid "Page One Options"
msgstr "Valg for side en"
#: languages/cpp/app_templates/kapp/pref.cpp:21
msgid "Second Page"
msgstr "Andre side"
#: languages/cpp/app_templates/kapp/pref.cpp:21
msgid "Page Two Options"
msgstr "Valg for side to"
#: languages/cpp/app_templates/kapp/pref.cpp:31
#: languages/cpp/app_templates/kapp/pref.cpp:40
msgid "Add something here"
msgstr "Legg til noe her"
#: languages/cpp/app_templates/kapp/app.cpp:102
msgid "Cus&tom Menuitem"
msgstr "&Tilpasset menyelement"
#: languages/cpp/app_templates/kapp/app.cpp:179
msgid "Open Location"
msgstr "Åpne adresse"
#: languages/cpp/app_templates/kscons_tdemdi/main.cpp:12
msgid "A simple tdemdi app"
msgstr "Et enkelt tdemdi-program"
#: languages/cpp/app_templates/kscons_tdemdi/apptdemdi.cpp:84
msgid "Terminal"
msgstr "Terminal"
#: languages/cpp/app_templates/kscons_tdemdi/app_part.cpp:56
msgid "%{APPNAMELC}Part"
msgstr "%{APPNAMELC}Part"
#: languages/python/pydoc.cpp:71
msgid "Error in pydoc"
msgstr "Feil i pydoc"
#: languages/python/pythonimplementationwidget.cpp:65
#: languages/ruby/rubyimplementationwidget.cpp:58
msgid "Cannot write to file"
msgstr "Kan ikke skrive til fil"
#: languages/python/pythonsupportpart.cpp:67
msgid "<b>Execute program</b><p>Runs the Python program."
msgstr "<b>Kjør programmet</b><p>Kjører Python-programmet."
#: languages/csharp/csharpsupportpart.cpp:70
#: languages/perl/perlsupportpart.cpp:70
#: languages/python/pythonsupportpart.cpp:69
msgid "Execute String..."
msgstr "Kjør streng …"
#: languages/python/pythonsupportpart.cpp:72
msgid "Execute string"
msgstr "Kjør streng"
#: languages/python/pythonsupportpart.cpp:73
msgid "<b>Execute String</b><p>Executes a string as Python code."
msgstr "<b>Kjør streng</b><p>Kjører en streng som Python-kode."
#: languages/python/pythonsupportpart.cpp:75
msgid "Start Python Interpreter"
msgstr "Start Python-tolkeren"
#: languages/python/pythonsupportpart.cpp:78
msgid "Start Python interpreter"
msgstr "Start Python-tolker"
#: languages/python/pythonsupportpart.cpp:79
msgid ""
"<b>Start python interpreter</b>"
"<p>Starts the Python interpreter without a program"
msgstr "<b>Start Python-tolker</b> <p>Starter Python-tolkeren uten et program"
#: languages/python/pythonsupportpart.cpp:81
msgid "Python Documentation..."
msgstr "Python-dokumentasjon …"
#: languages/python/pythonsupportpart.cpp:84
msgid "Python documentation"
msgstr "Python-dokumentasjon"
#: languages/python/pythonsupportpart.cpp:85
msgid "<b>Python documentation</b><p>Shows a Python documentation page."
msgstr "<p>Python-dokumentasjon</b><p>Viser en side Python-dokumentasjon."
#: languages/csharp/csharpsupportpart.cpp:218
#: languages/perl/perlsupportpart.cpp:218
#: languages/python/pythonsupportpart.cpp:352
msgid "String to Execute"
msgstr "Streng som skal kjøres"
#: languages/csharp/csharpsupportpart.cpp:218
#: languages/perl/perlsupportpart.cpp:218
#: languages/python/pythonsupportpart.cpp:352
msgid "String to execute:"
msgstr "Streng som skal kjøres:"
#: languages/python/pythonsupportpart.cpp:364
msgid "Show Python Documentation"
msgstr "Vis Python-dokumentasjon"
#: languages/python/pythonsupportpart.cpp:364
msgid "Show Python documentation on keyword:"
msgstr "Vis Python-dokumentasjon om nøkkelordet:"
#: languages/csharp/csharpdoc.cpp:46 languages/perl/perldoc.cpp:46
msgid "The only existing directories are functions and faq."
msgstr "De eneste katalogene som finnes er funksjoner og faq."
#: languages/csharp/csharpdoc.cpp:91
#, fuzzy
msgid "Error in csharpdoc"
msgstr "Feil i pydoc"
#: languages/csharp/csharpsupportpart.cpp:68
#, fuzzy
msgid "Runs the CSharp program"
msgstr "Kjører Perl-programmet"
#: languages/csharp/csharpsupportpart.cpp:73
#, fuzzy
msgid "Executes a string as CSharp code"
msgstr "Kjører en streng som Perl-kode"
#: languages/csharp/csharpsupportpart.cpp:75
#, fuzzy
msgid "Start CSharp Interpreter"
msgstr "Start Perl-tolkeren"
#: languages/csharp/csharpsupportpart.cpp:78
#, fuzzy
msgid "Starts the CSharp interpreter without a program"
msgstr "Starter Perl-tolkeren uten et program"
#: languages/csharp/csharpsupportpart.cpp:80
#, fuzzy
msgid "Find CSharp Function Documentation..."
msgstr "Finn dokumentasjon for Perl-funksjon …"
#: languages/csharp/csharpsupportpart.cpp:83
#, fuzzy
msgid "Show the documentation page of a CSharp function"
msgstr "Vis dokumentasjonssida for en Perl-funksjon"
#: languages/csharp/csharpsupportpart.cpp:85
#, fuzzy
msgid "Find CSharp FAQ Entry..."
msgstr "Finn i Perls FAQ …"
#: languages/csharp/csharpsupportpart.cpp:88
#: languages/perl/perlsupportpart.cpp:88
msgid "Show the FAQ entry for a keyword"
msgstr "Vis FAQ-avsnittet for et nøkkelord"
#: languages/csharp/csharpsupportpart.cpp:230
#, fuzzy
msgid "Show CSharp Documentation"
msgstr "Vis Perl-dokumentasjon"
#: languages/csharp/csharpsupportpart.cpp:230
#, fuzzy
msgid "Show CSharp documentation for function:"
msgstr "Vis Perl-dokumentasjon for funksjon:"
#: languages/csharp/csharpsupportpart.cpp:242
#: languages/perl/perlsupportpart.cpp:242
msgid "Show FAQ Entry"
msgstr "Vis FAQ-avsnitt"
#: languages/csharp/csharpsupportpart.cpp:242
#: languages/perl/perlsupportpart.cpp:242
msgid "Show FAQ entry for keyword:"
msgstr "Vis FAQ-avsnitt for nøkkelord:"
#: languages/perl/perlsupportpart.cpp:68
msgid "Runs the Perl program"
msgstr "Kjører Perl-programmet"
#: languages/perl/perlsupportpart.cpp:73
msgid "Executes a string as Perl code"
msgstr "Kjører en streng som Perl-kode"
#: languages/perl/perlsupportpart.cpp:75
msgid "Start Perl Interpreter"
msgstr "Start Perl-tolkeren"
#: languages/perl/perlsupportpart.cpp:78
msgid "Starts the Perl interpreter without a program"
msgstr "Starter Perl-tolkeren uten et program"
#: languages/perl/perlsupportpart.cpp:80
msgid "Find Perl Function Documentation..."
msgstr "Finn dokumentasjon for Perl-funksjon …"
#: languages/perl/perlsupportpart.cpp:83
msgid "Show the documentation page of a Perl function"
msgstr "Vis dokumentasjonssida for en Perl-funksjon"
#: languages/perl/perlsupportpart.cpp:85
msgid "Find Perl FAQ Entry..."
msgstr "Finn i Perls FAQ …"
#: languages/perl/perlsupportpart.cpp:230
msgid "Show Perl Documentation"
msgstr "Vis Perl-dokumentasjon"
#: languages/perl/perlsupportpart.cpp:230
msgid "Show Perl documentation for function:"
msgstr "Vis Perl-dokumentasjon for funksjon:"
#: languages/perl/perldoc.cpp:91
msgid "Error in perldoc"
msgstr "Feil i perldoc"
#: languages/lib/debugger/debugger.cpp:198
msgid "Breakpoint"
msgstr "Stoppunkt"
#: languages/lib/designer_integration/implementationwidget.cpp:80
#, c-format
msgid "Create or Select Implementation Class for: %1"
msgstr "Opprett eller velg implementeringsklasse for : %1"
#: languages/lib/designer_integration/implementationwidget.cpp:82
msgid "Namespaces &amp;&amp; Classes"
msgstr "Navnerom og klasser"
#: languages/lib/designer_integration/implementationwidget.cpp:126
msgid "Class was created but not found in class store."
msgstr "Klassen ble opprettet, men fantes ikke i klasselageret."
#: languages/lib/designer_integration/tqtdesignerintegration.cpp:63
#, c-format
msgid "Cannot find implementation class for form: %1"
msgstr "Finner ikke implementeringsklasse for skjemaet: %1"
#: languages/bash/bashsupport_part.cpp:48
#: languages/ruby/rubysupport_part.cpp:55
msgid "<b>Run</b><p>Starts an application."
msgstr "<b>Kjør</b> <p> Starter et program."
#: languages/ruby/rubysupport_part.cpp:58
#: languages/ruby/rubysupport_part.cpp:61
#, fuzzy
msgid "Run Test Under Cursor"
msgstr "Kjør til markør"
#: languages/ruby/rubysupport_part.cpp:62
#, fuzzy
msgid ""
"<b>Run Test Under Cursor</b>"
"<p>Runs the function under the cursor as test."
msgstr ""
"<b>Kjør til markør</b> "
"<p>Fortsetter programkjøringen til markørposisjonen er nådd."
#: languages/ruby/rubysupport_part.cpp:64
#: languages/ruby/rubysupport_part.cpp:65
#, fuzzy
msgid "Launch Browser"
msgstr "Bla i kildekode"
#: languages/ruby/rubysupport_part.cpp:66
msgid ""
"<b>Launch Browser</b>"
"<p>Opens a web browser pointing to the Ruby Rails server"
msgstr ""
#: languages/ruby/rubysupport_part.cpp:68
#, fuzzy
msgid "Switch To Controller"
msgstr "By&tt farger"
#: languages/ruby/rubysupport_part.cpp:69
#, fuzzy
msgid "Switch To Model"
msgstr "Bytt til"
#: languages/ruby/rubysupport_part.cpp:70
#, fuzzy
msgid "Switch To View"
msgstr "Bytt til"
#: languages/ruby/rubysupport_part.cpp:71
#, fuzzy
msgid "Switch To Test"
msgstr "Bytt til"
#: languages/ruby/rubysupport_part.cpp:77
#: languages/ruby/rubysupport_part.cpp:78
#, fuzzy
msgid "Ruby Shell"
msgstr "Ru&by-skall:"
#: languages/ruby/rubysupport_part.cpp:102
msgid "Ruby"
msgstr "Ruby"
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:182
msgid "Add empty breakpoint"
msgstr "Legg til tomt stoppunkt"
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:182
msgid " <Alt+A>"
msgstr " <Alt+A>"
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:183
msgid ""
"<b>Add empty breakpoint</b>"
"<p>Shows a popup menu that allows you to choose the type of breakpoint, then "
"adds a breakpoint of the selected type to the breakpoints list."
msgstr ""
"<b>Legg til tomt stoppunkt</b> "
"<p> Viser en sprettoppmeny som kan brukes til å velge type stoppunkt, og legger "
"så et stoppunkt av valgt type til stoppunkt-lista."
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:188
msgid "Delete selected breakpoint"
msgstr "Sletter det valgte stoppunktet"
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:188
msgid " <Delete>"
msgstr " <Delete>"
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:189
msgid ""
"<b>Delete selected breakpoint</b>"
"<p>Deletes the selected breakpoint in the breakpoints list."
msgstr ""
"<b>Slett valgt stoppunkt</b> "
"<p>Sletter det valgte stoppunktet fra lista."
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:193
msgid "Edit selected breakpoint"
msgstr "Rediger valgt stoppunkt"
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:193
msgid " <Return>"
msgstr " <Return>"
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:194
msgid ""
"<b>Edit selected breakpoint</b>"
"<p>Allows to edit location, condition and ignore count properties of the "
"selected breakpoint in the breakpoints list."
msgstr ""
"<b>Rediger valgt stoppunkt</b> "
"<p>Sted, betingelse og antallsegenskapene til det valgte punktet i "
"stoppunkt-lista kan endres her."
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:198
msgid "Remove all breakpoints"
msgstr "Fjern alle stoppunker"
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:199
msgid "<b>Remove all breakpoints</b><p>Removes all breakpoints in the project."
msgstr "<b>Fjern alle stoppunkter</b><p>Fjerner alle stoppunkter i prosjektet."
#: languages/ruby/debugger/breakpoint.h:129
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:209
msgid "File:line"
msgstr "Fil:linje"
#: languages/cpp/debugger/breakpoint.h:285
#: languages/ruby/debugger/breakpoint.h:155
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:210
msgid "Watchpoint"
msgstr "Vaktpunkt"
#: languages/ruby/debugger/breakpoint.h:178
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:211
msgid "Catchpoint"
msgstr "Gripepunkt"
#: languages/ruby/debugger/breakpoint.h:201
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:212
msgid "Method()"
msgstr "Metode()"
#: languages/ruby/debugger/rdbbreakpointwidget.cpp:237
msgid "Show"
msgstr "Vis"
#: languages/ruby/debugger/variablewidget.cpp:56
msgid "E&xpression to watch:"
msgstr "&Uttrykk som skal overvåkes:"
#: languages/ruby/debugger/variablewidget.cpp:195
msgid "Remove Watch Expression"
msgstr "Slett overvåket uttrykk"
#: languages/ruby/debugger/variablewidget.cpp:198
msgid "Copy to Clipboard"
msgstr "Kopier til utklippstavla"
#: languages/ruby/debugger/debuggerpart.cpp:97
msgid ""
"<b>Variable tree</b>"
"<p>The variable tree allows you to see the variable values as you step through "
"your program using the internal debugger. Click the right mouse button on items "
"in this view to get a popup menu.\n"
"To speed up stepping through your code leave the tree items closed.\n"
msgstr ""
"<b>Variabeltre</b> "
"<p>Med variabeltreet kan man se på variabelverdiene mens programmet kjøres "
"stegvis med den interne feilsøkeren. Trykk høyre museknapp på elementer i denne "
"visningen for å få opp en sprettoppmeny.\n"
"Stegkjøringen kan gjøres raskere ved å lukke trevisningen.\n"
#: languages/ruby/debugger/debuggerpart.cpp:125
msgid ""
"<b>Frame stack</b>"
"<p>Often referred to as the \"call stack\", this is a list showing what method "
"is currently active and who called each method to get to this point in your "
"program. By clicking on an item you can see the values in any of the previous "
"calling methods."
msgstr ""
"<b>Funksjonskall-stakk</b> "
"<p>På engelsk «Frame stack» dette er en liste som viser hvilken metode som nå "
"er aktiv og hvem som kalte hver metode for å komme til dette stedet i "
"programmet. Verdier i alle tidligere kalte metoder kan vises ved et trykk på et "
"element i lista."
#: languages/ruby/debugger/debuggerpart.cpp:134
msgid "Debugger method call stack"
msgstr "Feilsøkers funksjonskallstakk"
#: languages/ruby/debugger/debuggerpart.cpp:141
msgid "RDB Output"
msgstr "RDB utdata"
#: languages/ruby/debugger/debuggerpart.cpp:143
msgid ""
"<b>RDB output</b>"
"<p>Shows all rdb commands being executed. You can also issue any other rdb "
"command while debugging."
msgstr ""
"<b> RDB utdata</b> "
"<p>Viser alle rdb-kommandoer som kjøres. Du kan også gi rdb-kommandoer under "
"feilsøking."
#: languages/ruby/debugger/debuggerpart.cpp:146
msgid "RDB"
msgstr "RDB"
#: languages/ruby/debugger/debuggerpart.cpp:147
msgid "RDB output"
msgstr "RDB utdata"
#: languages/ruby/debugger/debuggerpart.cpp:183
msgid ""
"<b>Interrupt application</b>"
"<p>Interrupts the debugged process or current RDB command."
msgstr ""
"<b>Avbryt programmet</b>"
"<p>Avbryter prosessen som feilsøkes, eller nåværende RDB-kommando."
#: languages/ruby/debugger/debuggerpart.cpp:196
msgid ""
"<b>Step over</b>"
"<p>Executes one line of source in the current source file. If the source line "
"is a call to a method the whole method is executed and the app will stop at the "
"line following the method call."
msgstr ""
"<b>Gå over</b> <o>Utfører en linje av kildekoden i gjeldende kildekodefil. Hvis "
"linja er et kall til en metode, kjøres hele metoden og kjøringen stopper på "
"linja etter metodekallet."
#: languages/ruby/debugger/debuggerpart.cpp:207
msgid ""
"<b>Step into</b>"
"<p>Executes exactly one line of source. If the source line is a call to a "
"method then execution will stop after the method has been entered."
msgstr ""
"<b>Gå inn i</b> "
"<p>Kjører akkurat en linje av kildekoden. Hvis linja er et kall til en metode "
"vil kjøringen stoppe etter at metoden er kalt."
#: languages/ruby/debugger/debuggerpart.cpp:217
msgid "Steps out of the current method"
msgstr "Går ut av gjeldende metode"
#: languages/ruby/debugger/debuggerpart.cpp:218
msgid ""
"<b>Step out</b>"
"<p>Executes the application until the currently executing method is completed. "
"The debugger will then display the line after the original call to that method. "
"If program execution is in the outermost frame (i.e. in the "
"topleveltoggleWatchpoint) then this operation has no effect."
msgstr ""
"<b>Gå ut</b> "
"<p>Kjører programmet til gjeldende metode er ferdig. Feilsøkeren viser deretter "
"linja etter kallet til den metoden. Hvis programkjøringen er på høyeste nivå "
"(dvs. i topleveltoggleWatchpoint ) så har denne handllingen ingen virkning."
#: languages/ruby/debugger/debuggerpart.cpp:321
msgid ""
"<b>Watch</b>"
"<p>Adds an expression under the cursor to the Variables/Watch list."
msgstr ""
"<b>Overvåk</b> "
"<p>Legg til uttrykket under markøren i lista over variabler til overvåkning."
#: languages/ruby/debugger/debuggerpart.cpp:323
#, c-format
msgid "Inspect: %1"
msgstr "Inspiser: %1"
#: languages/ruby/debugger/debuggerpart.cpp:324
msgid "<b>Inspect</b><p>Evaluates an expression under the cursor."
msgstr "<b>Inspiser</b> <p>Finner verdien til uttrykket under markøren."
#: languages/ruby/debugger/debuggerpart.cpp:705
msgid "Restart"
msgstr "Omstart"
#: languages/ruby/debugger/rdbcontroller.cpp:349
msgid ""
"rdb message:\n"
msgstr ""
"rdb-melding:\n"
#: languages/ruby/debugger/rdbcontroller.cpp:397
#: languages/ruby/debugger/rdbcontroller.cpp:399
#: languages/ruby/debugger/rdbcontroller.cpp:461
#: languages/ruby/debugger/rdbcontroller.cpp:508
#, c-format
msgid "No source: %1"
msgstr "Ingen kilde: %1"
#: languages/ruby/debugger/rdbcontroller.cpp:706
msgid ""
"The ruby debugger cannot use the tty* or pty* devices.\n"
"Check the settings on /dev/tty* and /dev/pty*\n"
"As root you may need to \"chmod ug+rw\" tty* and pty* devices and/or add the "
"user to the tty group using \"usermod -G tty username\"."
msgstr ""
"Ruby-feilsøkeren kan ikke brukte tty*- eller pty*-enheter.\n"
"Sjekk innstillingene til /dev/tty* og /dev/pty*\n"
"\n"
"Det kan hende at du må kjøre «chmod ug+rw» som root på\n"
"tty*- og pty*-enhetene og/eller legge til brukeren til tty-\n"
"gruppen ved å bruke «usermod -G tty brukernavn»."
#: languages/ruby/debugger/dbgtoolbar.cpp:224
#, fuzzy
msgid "TDevelop ruby debugger: Click to execute one line of code (\"step\")"
msgstr ""
"KDevelop ruby-feilsøker: Klikk for å utføre en linje med kode (ett steg)"
#: languages/ruby/debugger/dbgtoolbar.cpp:302
msgid "Step Over"
msgstr "Gå over"
#: languages/ruby/debugger/dbgtoolbar.cpp:303
msgid "Step Into"
msgstr "Gå inn i"
#: languages/ruby/debugger/dbgtoolbar.cpp:320
msgid "Execute one line of code, but run through methods"
msgstr "Utfør en linje med kode, men kjør gjennom metoder"
#: languages/ruby/debugger/dbgtoolbar.cpp:321
msgid "Execute one line of code, stepping into methods if appropriate"
msgstr "Utfør en linje med kode, gå inn i metoder hvis det passer"
#: languages/ruby/debugger/dbgtoolbar.cpp:329
msgid "Execute one line of code, but run through methods."
msgstr "Utfør en linje med kode, men kjør gjennom metoder."
#: languages/ruby/debugger/dbgtoolbar.cpp:331
msgid "Execute one line of code, stepping into methods if appropriate."
msgstr "Utfør en linje med kode, gå inn i metoder hvis det passer."
#: languages/ruby/debugger/rdboutputwidget.cpp:60
msgid "&RDB cmd:"
msgstr "&RDB kmd:"
#: languages/ruby/debugger/rdboutputwidget.cpp:76
msgid "Pause execution of the app to enter rdb commands"
msgstr "Stopp kjøring av programmet for å angi rdb-kommandoer"
#: languages/ada/problemreporter.cpp:84
msgid ""
"<b>Problem reporter</b>"
"<p>This window shows errors reported by a language parser."
msgstr ""
"<b>Problemrapportør</b> "
"<p>Dette vinduet viser feilmeldinger fra en språktolker."
#: languages/ada/problemreporter.cpp:256
msgid "Ada Parsing"
msgstr "Ada-tolking"
#: languages/ada/adasupportpart.cpp:63
#: languages/pascal/pascalsupport_part.cpp:73
msgid ""
"<b>Problem reporter</b>"
"<p>This window shows various \"problems\" in your project. It displays errors "
"reported by a language parser."
msgstr ""
"<b>Problemrapportør</b> "
"<p>Dette vinduet viser forskjellige «problemer» i prosjektet. Det viser "
"feilmeldinger fra en språktolker."
#: languages/sql/sqloutputwidget.cpp:81
#, c-format
msgid "No such connection: %1"
msgstr "Tilkobling %1 finnes ikke"
#: languages/sql/sqloutputwidget.cpp:104
#, c-format
msgid "Query successful, number of rows affected: %1"
msgstr "Vellykket forespørsel, antall rader: %1"
#: languages/sql/sqloutputwidget.cpp:111 languages/sql/sqloutputwidget.cpp:118
msgid "An error occurred:"
msgstr "Det oppsto en feil:"
#: languages/sql/sqloutputwidget.cpp:119
msgid "Driver"
msgstr "Driver"
#: languages/sql/sqlactions.cpp:81
msgid "<no database server>"
msgstr "<ingen database-tjener>"
#: languages/sql/sqlactions.cpp:89
msgid "<error - no connection %1>"
msgstr "<feil ingen forbindelse %1>"
#: languages/sql/sqlsupport_part.cpp:45
msgid "<b>Run</b><p>Executes a SQL script."
msgstr "<b>Kjør</b><p>Kjører et SQL-skript."
#: languages/sql/sqlsupport_part.cpp:47
msgid "&Database Connections"
msgstr "&Database-tilkoblinger"
#: languages/sql/sqlsupport_part.cpp:59
msgid "Output of SQL commands"
msgstr "Utdata fra SQL-kommandoer"
#: languages/sql/sqlsupport_part.cpp:60
msgid ""
"<b>Output of SQL commands</b>"
"<p>This window shows the output of SQL commands being executed. It can display "
"results of SQL \"select\" commands in a table."
msgstr ""
"<b>Utdata fra SQL-kommandoer</b> "
"<p>I dette vinduet vises utdata fra SQL-kommandoer som kjøres. Det kan vise "
"resultater fra SQL «select»-kommandoer i en tabell."
#: languages/sql/sqlsupport_part.cpp:135
msgid "Specify Your Database Connections"
msgstr "Oppgi dine database-tilkoblinger"
#: languages/sql/sqlsupport_part.cpp:167
msgid "Please select a valid database connection."
msgstr "Velg en gyldig database-tilkobling."
#: languages/fortran/ftnchekconfigwidget.cpp:93
msgid "Warn about inconsistent use of arguments that use arrays"
msgstr "Advar om inkonsekvent bruk av argumenter som bruker arrays"
#: languages/fortran/ftnchekconfigwidget.cpp:94
msgid ""
"Warn about dummy arguments of a data type different from the actual arguments"
msgstr ""
"Advar om formelle argumenter av en datatype forskjellig fra virkelige "
"argumenter"
#: languages/fortran/ftnchekconfigwidget.cpp:96
msgid ""
"Warn if the invocation assumes a different data type for the return type, "
"different from the actual return type"
msgstr ""
"Advar hvis kallet antar at den returnerte datatypen er forskjellig fra den "
"virkelige returnerte datatypen"
#: languages/fortran/ftnchekconfigwidget.cpp:98
msgid "Warn about invoking a subprogram with an incorrect number of arguments"
msgstr "Advar om et underprogram kalles med feil antall argumenter"
#: languages/fortran/ftnchekconfigwidget.cpp:104
msgid ""
"Corresponding arrays in each declaration of a block must agree in size and "
"number of dimensions"
msgstr ""
"Tilsvarende matriser i hver deklarasjon av en blokk må stemme i størrelse og "
"antall dimensjoner"
#: languages/fortran/ftnchekconfigwidget.cpp:106
msgid "The comparison of two blocks is done variable-by-variable"
msgstr "Sammenlikning av to blokker gjøres variabel for variabel"
#: languages/fortran/ftnchekconfigwidget.cpp:107
msgid ""
"Warn if different declarations of the same block are not equal in total length"
msgstr ""
"Advar om forskjellige deklarasjoner av samme blokk ikke har samme totallengde"
#: languages/fortran/ftnchekconfigwidget.cpp:108
msgid ""
"In each declaration of a block, corresponding memory locations must agree in "
"data type"
msgstr ""
"I hver deklarasjon av en blokk må tilsvarende minneadresser oppgis med samme "
"datatype"
#: languages/fortran/ftnchekconfigwidget.cpp:115
msgid "Use of the result of integer division as an exponent"
msgstr "Bruk av resultatet av heltallsdivisjon som eksponent"
#: languages/fortran/ftnchekconfigwidget.cpp:116
msgid "Conversion of an expression involving an integer division to real"
msgstr "Konvertering av et uttrykk som omfatter heltallsdivisjon til flyttall"
#: languages/fortran/ftnchekconfigwidget.cpp:117
msgid "Division in an integer constant expression that yields a result of zero"
msgstr "Divisjon i et konstant heltallsuttrykk som gir null som resultat"
#: languages/fortran/ftnchekconfigwidget.cpp:123
msgid ""
"A scalar dummy argument is actually the same as another and is (or may be) "
"modified"
msgstr ""
"Et skalart formelt argument er faktisk det samme som et annet og blir (eller "
"kan bli) endret"
#: languages/fortran/ftnchekconfigwidget.cpp:125
msgid ""
"A dummy argument which is an array or array element is the same array as "
"another and is modified"
msgstr ""
"Et formelt argument som er en matrise eller matriseelement er samme matrise som "
"en annen og blir endret"
#: languages/fortran/ftnchekconfigwidget.cpp:127
msgid ""
"A scalar dummy argument is the same as a common variable in the subprogram, and "
"either is modified"
msgstr ""
"Et skalart formelt argument er det samme som en common-variabel i "
"underprogrammet, og en av dem blir endret"
#: languages/fortran/ftnchekconfigwidget.cpp:134
msgid "ACCEPT and TYPE I/O statements"
msgstr "ACCEPT og TYPE I/U-setninger"
#: languages/fortran/ftnchekconfigwidget.cpp:135
msgid ""
"Expressions defining array bounds that contain array elements or function "
"references"
msgstr ""
"Uttrykk som angir matrisegrenser som inneholder matriseelementer eller "
"funksjonsreferanser"
#: languages/fortran/ftnchekconfigwidget.cpp:137
msgid "Assignment statements involving arrays"
msgstr "Tilordningssetninger som påvirker matriser"
#: languages/fortran/ftnchekconfigwidget.cpp:143
msgid "Backslash characters in strings"
msgstr "Bakover-skråstreker i strenger"
#: languages/fortran/ftnchekconfigwidget.cpp:144
msgid "COMMON block variables not in descending order of storage sizes"
msgstr "Variabler i COMMON er ikke i synkende rekkefølge etter minnestørrelse"
#: languages/fortran/ftnchekconfigwidget.cpp:145
msgid "Hollerith constants"
msgstr "Hollerith-konstanter"
#: languages/fortran/fortransupportpart.cpp:67
msgid "&Ftnchek"
msgstr "&Ftnchek"
#: languages/fortran/fortransupportpart.cpp:70
msgid "Run ftnchek"
msgstr "Kjør ftnchek"
#: languages/fortran/fortransupportpart.cpp:71
msgid ""
"<b>Run ftnchek</b>"
"<p>Runs <b>ftnchek</b> to check fortran programs for semantic errors. Configure "
"ftnchek options in project settings dialog, <b>Ftnchek</b> tab."
msgstr ""
"<b>Kjør ftnchek</b> "
"<p> Kjører <b>ftnchek</b> for å se etter semantiske feil i Fortran-programmer. "
"Ftncheck kan stilles inn i dialogen for prosjektinnstillinger, fanebladet <b>"
"ftncheck</b>."
#: languages/fortran/fortransupportpart.cpp:85
msgid "There is currently a job running."
msgstr "Det kjører en jobb nå."
#: languages/fortran/fortransupportpart.cpp:160
msgid "Ftnchek"
msgstr "Ftnchek"
#: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:243
msgid "PGHPF Compiler Options"
msgstr "Kompileringsvalg for PGHPF"
#: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:243
msgid "PGF77 Compiler Options"
msgstr "Kompileringsvalg for PGF77"
#: languages/fortran/compiler/pgioptions/pgioptionsplugin.cpp:255
msgid "HPF"
msgstr "HPF"
#: languages/php/phpsupportpart.cpp:95
msgid "<b>Run</b><p>Executes script on a terminal or a webserver."
msgstr "<b>Kjør</b> <p>Kjører skript i en terminal eller en nett-tjener."
#: languages/php/phpsupportpart.cpp:97
msgid "&New Class..."
msgstr "&Ny klasse …"
#: languages/php/phpsupportpart.cpp:100
msgid "New class"
msgstr "Ny klasse"
#: languages/php/phpsupportpart.cpp:101
msgid "<b>New class</b><p>Runs New Class wizard."
msgstr "<b>Ny klasse</b><p>Kjører veiviser for ny klasse."
#: languages/php/phpsupportpart.cpp:106
msgid ""
"<b>PHP problems</b>"
"<p>This view shows PHP parser warnings, errors, and fatal errors."
msgstr ""
"<b>PHP-problemer</b> "
"<p>Her vises PHP tolkingsadvarsler og feil, og fatale feil."
#: languages/php/phpsupportpart.cpp:118 languages/php/phpsupportpart.cpp:333
msgid "PHP"
msgstr "PHP"
#: languages/php/phpsupportpart.cpp:211
msgid "PHP Specific"
msgstr "Spesielt for PHP"
#: languages/php/phpsupportpart.cpp:211 languages/php/phpsupportpart.cpp:243
msgid "PHP Settings"
msgstr "Innstillinger for PHP"
#: languages/php/phpsupportpart.cpp:238
msgid ""
"There is no configuration for executing a PHP file.\n"
"Please set the correct values in the next dialog."
msgstr ""
"Det finnes ikke noe oppsett for å kjøre en PHP-fil.\n"
"Oppgi riktige verdier i neste dialog."
#: languages/php/phpsupportpart.cpp:239
msgid "Customize PHP Mode"
msgstr "Tilpass PHP-modus"
#: languages/php/phpcodecompletion.cpp:709
msgid "Type of %1 is %2"
msgstr "Type for %1 er %2"
#: languages/php/phperrorview.cpp:375
msgid "Undefined function"
msgstr "Uspesifisert funksjon"
#: languages/php/phperrorview.cpp:378
msgid "Parse Error"
msgstr "Tolkingsfeil"
#: languages/kjssupport/kjssupport_part.cpp:73
msgid "Test the active script."
msgstr "Test det aktive skriptet."
#: languages/kjssupport/kjssupport_part.cpp:90
msgid "KJS Console"
msgstr "KJS-Konsoll"
#: languages/kjssupport/kjssupport_part.cpp:90
msgid "KJS Embed Console"
msgstr "KJS Innebygg konsoll"
#: languages/pascal/pascalsupport_part.cpp:72
msgid "problem reporter"
msgstr "problemrapportør"
#: languages/pascal/pascalsupport_part.cpp:182
#, c-format
msgid ""
"_n: Found 1 problem\n"
"Found %n problems"
msgstr ""
"Fant ett problem\n"
"Fant %n problemer"
#: languages/pascal/pascalsupport_part.cpp:194
#, c-format
msgid "Parsing file: %1"
msgstr "Tolker fil : %1"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:34
msgid "Format errors like GCC does"
msgstr "Formater feil slik GCC gjør det"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:40
msgid "Write all possible info"
msgstr "Skriv all mulig informasjon"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:42
msgid "Write no messages"
msgstr "Skriv ingen meldinger"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:44
msgid "Show only errors"
msgstr "Vis bare feil"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:46
msgid "Show some general information"
msgstr "Vis litt generell informasjon"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:48
msgid "Issue warnings"
msgstr "Vis advarsler"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:50
msgid "Issue notes"
msgstr "Vis merknader"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:52
msgid "Issue hints"
msgstr "Vis tips"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:54
msgid "Write other debugging info"
msgstr "Skriv annen feilsøkings informasjon"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:59
msgid "Other Information"
msgstr "Annen informasjon"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:61
msgid "Show line numbers when processing files"
msgstr "Vis linjenumre når filer behandles"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:63
msgid "Print information on loaded units"
msgstr "Skriv ut informasjon om innlastede enheter"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:65
msgid "Print the names of loaded files"
msgstr "Skriv ut navnene på innlastede filer"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:67
msgid "Write which macros are defined"
msgstr "Skriv hvilke makroer som er angitt"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:69
msgid "Warn when processing a conditional"
msgstr "Advar når et betingelsesuttrykk behandles"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:71
msgid "Print the names of procedures and functions"
msgstr "Skriv ut navnene på prosedyrer og funksjoner"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:73
msgid "Show all procedure declarations if an overloaded function error occurs"
msgstr ""
"Vis alle prosedyredeklarasjoner hvis det oppstår en feil ved overstyring av en "
"funksjon"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:91
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:105
msgid "Unit search path (delimited by \":\"):"
msgstr "Søkesti for enheter (med «:» mellom):"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:107
msgid "Include file search path (delimited by \":\"):"
msgstr "Søkesti for inkludering (med «:» mellom):"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:109
msgid "Object file search path (delimited by \":\"):"
msgstr "Søkesti for objektfiler (med «:» mellom):"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:111
msgid "Library search path (delimited by \":\"):"
msgstr "Søkesti for biblioteker (med «:» mellom):"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:142
msgid "Write executables and units in:"
msgstr "Skriv kjørbare og enheter i:"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:144
msgid "Write units in:"
msgstr "Skriv enheter i:"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:146
msgid "Executable name:"
msgstr "Navn på kjørbar:"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:151
msgid "Location of as and ld programs:"
msgstr "Hvor finnes as- og ld-programmene:"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:153
msgid "Dynamic linker executable:"
msgstr "Dynamisk lenker-program:"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:158
msgid "Compiler messages file:"
msgstr "Fil for kompilatormeldinger:"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:160
msgid "Write compiler messages to file:"
msgstr "Skriv kompilatormeldinger til fil:"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:191
msgid "Pascal Compatibility"
msgstr "Pascal-kompatibilitet"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:193
msgid "Switch on Delphi 2 extensions"
msgstr "Slå på Delphi 2-utvidelser"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:195
msgid "Strict Delphi compatibility mode"
msgstr "Streng kompatibilitet med Delphi"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:197
msgid "Borland TP 7.0 compatibility mode"
msgstr "Kompatibilitet med Borland TP 7.0"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:199
msgid "GNU Pascal compatibility mode"
msgstr "Kompatibilitet med GNU Pascal"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:203
msgid "C/C++ Compatibility"
msgstr "C/C++ kompatibilitet"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:205
msgid "Support C style operators *=, +=, /=, -="
msgstr "Støtt C-aktige operatorer *=, +=, /=, -="
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:207
msgid "Support C++ style INLINE"
msgstr "Støtt C++-aktig INLINE"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:209
msgid "Support C style macros"
msgstr "Støtt C-aktige makroer"
#: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:48
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:213
msgid "Language"
msgstr "Språk"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:215
msgid "Support the label and goto commands"
msgstr "Støtt kommandoene label og goto"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:217
msgid "Use ansistrings by default for strings"
msgstr "Bruk ansistring som standard for strenger"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:219
msgid ""
"Require the name of constructors to be init\n"
" and the name of destructors to be done"
msgstr ""
"Krev at konstruktorer skal hete init\n"
"og destruktorer skal hete done"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:221
msgid "Allow the static keyword in objects"
msgstr "Tillat nøkkelordet static i objekter"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:251
msgid "Assembler Info"
msgstr "Assembler-informasjon"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:253
msgid "Do not delete assembler files"
msgstr "Ikke slett assembler-filer"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:255
msgid "List source"
msgstr "List kildekode"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:257
msgid "List register allocation and release info"
msgstr "List informasjon om registerallokering og -frigjøring"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:259
msgid "List temporary allocations and deallocations"
msgstr "List midlertidige allokeringer og frigjøringer"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:264
msgid "Assembler Reader"
msgstr "Assembler-leser"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:265
msgid "Use default reader"
msgstr "Bruk standardleser"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:268
msgid "AT&T style assembler"
msgstr "Assembler i AT&T-stil"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:270
msgid "Intel style assembler"
msgstr "Assembler i Intel-stil"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:272
msgid "Direct assembler"
msgstr "Direkte assembler"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:278
msgid "Assembler Output"
msgstr "Utdata fra assembler"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:280
msgid "Use pipes instead of files when assembling"
msgstr "Bruk rør i stedet for filer under assemblering"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:281
msgid "Use default output"
msgstr "Bruk standard utdata"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:284
msgid "Use GNU as"
msgstr "Bruk GNU as"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:286
msgid "Use GNU asaout"
msgstr "Bruk GNU asaout"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:288
msgid "Use NASM coff"
msgstr "Bruk NASM coff"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:290
msgid "Use NASM elf"
msgstr "Bruk NASM elf"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:292
msgid "Use NASM obj"
msgstr "Bruk NASM obj"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:294
msgid "Use MASM"
msgstr "Bruk MASM"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:296
msgid "Use TASM"
msgstr "Bruk TASM"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:298
msgid "Use coff"
msgstr "Bruk coff"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:300
msgid "Use pecoff"
msgstr "Bruk pecoff"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:327
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:338
msgid "Debugging"
msgstr "Feilsøking"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:340
msgid "Generate information for GDB"
msgstr "Generell informasjon for GDB"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:342
msgid "Generate information for DBX"
msgstr "Generell informasjon for DBX"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:344
msgid "Use lineinfo unit"
msgstr "Bruk lineinfo-enhet"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:346
msgid "Use heaptrc unit"
msgstr "Bruk heaptrc-enhet"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:348
msgid "Generate checks for pointers"
msgstr "Lag pekersjekker"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:353
msgid "Profiling"
msgstr "Profilering"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:355
msgid "Generate profiler code for gprof"
msgstr "Lag profileringskode til gprof"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:362
msgid "General Optimization"
msgstr "Generell optimering"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:366
msgid "Generate smaller code"
msgstr "Lag mindre kode"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:368
msgid "Generate faster code"
msgstr "Lag raskere kode"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:373
msgid "Optimization Levels"
msgstr "Optimeringsnivåer"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:381
msgid "Level 3"
msgstr "Nivå 3"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:388
msgid "Architecture"
msgstr "Arkitektur"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:392
msgid "386/486"
msgstr "386/486"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:394
msgid "Pentium/PentiumMMX"
msgstr "Pentium/PentiumMMX"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:396
msgid "PentiumPro/PII/Cyrix 6x86/K6"
msgstr "PentiumPro/PII/Cyrix 6x86/K6"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:400
msgid "Another Optimization"
msgstr "En annen optimering"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:402
msgid "Use register variables"
msgstr "Bruk registervariabler"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:404
msgid "Uncertain optimizations"
msgstr "Usikre optimeringer"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:251
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:464
msgid "Compile Time Checks"
msgstr "Sjekker under kompilering"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:466
msgid "Include assert statements in compiled code"
msgstr "Ta med assert-setninger i kompilert kode"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:468
msgid "Do not check the unit name for being the same as the file name"
msgstr "Ikke sjekk at enhetsnavnet er det samme som filnavnet"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:271
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:472
msgid "Run Time Checks"
msgstr "Sjekker ved kjøring"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:281
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:474
msgid "Range checking"
msgstr "Områdesjekk"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:476
msgid "Stack checking"
msgstr "Stakk-sjekk"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:277
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:478
msgid "Input/Output checking"
msgstr "Inn/Ut-sjekking"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:480
msgid "Integer overflow checking"
msgstr "Sjekk for heltallsoverløp"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:170
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:484
msgid "Conditional defines (delimited by \":\"):"
msgstr "Betingete angivelser (med «:» mellom):"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:487
msgid "Undefine conditional defines (delimited by \":\"):"
msgstr "Avdefiner betingete angivelser (med «:» mellom):"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:492
msgid "Stack size:"
msgstr "Stakk-størrelse:"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:494
msgid "Heap size:"
msgstr "Heap-størrelse:"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:526
msgid "Linking Stage"
msgstr "Lenkertrinn"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:528
msgid "Create dynamic library"
msgstr "Lag dynamisk bibliotek"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:530
msgid "Create smartlinked units"
msgstr "Lag smartlenkede enheter"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:532
msgid "Generate release units"
msgstr "Lag utgivelsesenheter"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:534
msgid "Omit the linking stage"
msgstr "Utelat lenketrinnet"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:536
msgid "Create assembling and linking script"
msgstr "Lag skript for assemblering og lenking"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:540
msgid "Executable Generation"
msgstr "Opprettelse av programfil"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:542
msgid "Strip the symbols from the executable"
msgstr "Stryk symbolene fra programfila"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:544
msgid "Link with static units"
msgstr "Lenk med statiske enheter"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:546
msgid "Link with smartlinked units"
msgstr "Lenk med smartlenkede enheter"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:548
msgid "Link with dynamic libraries"
msgstr "Lenk med dynamiske biblioteker"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:550
msgid "Link with the C library"
msgstr "Lenk med C-biblioteket"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:555
msgid "Options passed to the linker (delimited by \":\"):"
msgstr "Flagg som sendes til lenkeren (med «:» mellom):"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:590
msgid "Recompile all used units"
msgstr "Kompiler alle brukte enheter omigjen"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:592
msgid "Do not read default configuration file"
msgstr "Ikke les standard-oppsettsfila"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:594
msgid "Compiler configuration file:"
msgstr "Kompilatorens oppsettsfil:"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:596
msgid "Stop after the error:"
msgstr "Fortsett etter feilen:"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:600
msgid "Browser Info"
msgstr "Leser-informasjon"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:601
msgid "No browser info"
msgstr "Ingen leser-informasjon"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:604
msgid "Global browser info"
msgstr "Global leser-informasjon"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:606
msgid "Global and local browser info"
msgstr "Global og lokal leser-informasjon"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:610
msgid "Target OS"
msgstr "Mål-OS"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:614
msgid "DOS and version 1 of the DJ DELORIE extender"
msgstr "DOS og versjon 1 av DJ DELORIE-utvideren"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:616
msgid "DOS and version 2 of the DJ DELORIE extender"
msgstr "DOS og versjon 2 av DJ DELORIE-utvideren"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:618
msgid "Linux"
msgstr "Linux"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:620
msgid "OS/2 (2.x) using the EMX extender"
msgstr "OS/2 (2.x) med EMX-utvideren"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:622
msgid "WINDOWS 32 bit"
msgstr "WINDOWS 32 bit"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:624
msgid "SunOS/Solaris"
msgstr "SunOS/Solaris"
#: languages/pascal/compiler/fpcoptions/optiontabs.cpp:626
msgid "BeOS"
msgstr "BeOS"
#: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:44
msgid "Free Pascal Compiler Options"
msgstr "Kompileringsvalg for Free Pascal"
#: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:53
#: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:51
msgid "Locations I"
msgstr "Steder I"
#: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:56
#: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:54
msgid "Locations II"
msgstr "Steder II"
#: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:62
#: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:57
msgid "Debug && Optimization"
msgstr "Feilsøking og optimering"
#: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:63
msgid "Assembler"
msgstr "Assembler"
#: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:65
#: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:66
msgid "Linker"
msgstr "Lenker"
#: languages/pascal/compiler/fpcoptions/fpcoptionsplugin.cpp:69
msgid "Feedback"
msgstr "Tilbakemelding"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:32
msgid "Map File"
msgstr "Kartfil"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:36
msgid "Segments"
msgstr "Segmenter"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:38
msgid "Publics"
msgstr "Publics"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:40
msgid "Detailed"
msgstr "Detaljert"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:45
msgid "Default dynamic loader:"
msgstr "Standard dynamisk laster:"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:50
msgid "Reserved address space:"
msgstr "Reservert adresserom:"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:87
msgid "Include search path (delimited by \":\"):"
msgstr "Søkesti for inkludering (med «:» mellom):"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:89
msgid "Resource search path (delimited by \":\"):"
msgstr "Søkesti for ressurser (med «:» mellom):"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:93
msgid "Object search path (delimited by \":\"):"
msgstr "Søkesti for objekter (med «:» mellom):"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:122
msgid "Executable output directory:"
msgstr "Mappe der kjørbare lagres:"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:124
msgid "Unit output directory:"
msgstr "Mappe der enheter lagres:"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:126
msgid "Package directory:"
msgstr "Mappe for pakker:"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:128
msgid "Package source code directory:"
msgstr "Mappe for kildekodepakker:"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:159
msgid "Build all units"
msgstr "Bygg alle enheter"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:161
msgid "Make modified units"
msgstr "Bygg enheter som er endret"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:163
msgid "Quiet compile"
msgstr "Stille kompilering"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:165
msgid "Disable implicit package compilation"
msgstr "Slå av implisitt pakkekompilering"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:173
msgid "Unit aliases in form unit=alias (delimited by \":\"):"
msgstr "Enhetsaliaser på formen enhet=alias (med «:» mellom):"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:180
msgid "Output hint messages"
msgstr "Gi tipsmeldinger"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:182
msgid "Output warning messages"
msgstr "Gi varselmeldinger"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:186
msgid "Packages"
msgstr "Pakker"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:187
msgid "Build with packages (delimited by \":\"):"
msgstr "Bygg med pakker ( skilletegn «:»):"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:223
msgid "Code Alignment && Stack Frames"
msgstr "Kodeinnretting og stakk-rammer"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:224
msgid "Default (-$A8)"
msgstr "Standard (-$A8)"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:227
msgid "Never align"
msgstr "Innrett aldri"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:229
msgid "On word boundaries"
msgstr "På ordgrenser"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:231
msgid "On double word boundaries"
msgstr "På dobbeltordgrenser"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:233
msgid "On quad word boundaries"
msgstr "På firdoble ordgrenser"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:235
msgid "Generate stack frames"
msgstr "Lag stakk-rammer"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:239
msgid "Enumeration Size"
msgstr "Størrelse på opptelling"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:240
msgid "Default (-$Z1)"
msgstr "Standard (-$Z1)"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:243
msgid "Unsigned byte (256 values)"
msgstr "Byte uten fortegn (256 verdier)"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:245
msgid "Unsigned word (64K values)"
msgstr "Ord uten fortegn (64K verdier)"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:247
msgid "Unsigned double word (4096M values)"
msgstr "Dobbeltord uten fortegn (4096M verdier)"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:253
msgid "Assertions"
msgstr "Påstander"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:255
msgid "Complete boolean evaluation"
msgstr "Fullstendig boolsk evaluering"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:257
msgid "Extended syntax"
msgstr "Utvidet syntaks"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:259
msgid "Long strings"
msgstr "Lange strenger"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:261
msgid "Open string parameters"
msgstr "Parametre for åpne strenger"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:263
msgid "Type-checked pointers"
msgstr "Type-sjekkede pekere"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:265
msgid "Var-string checking"
msgstr "Sjekking av var-strenger"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:267
msgid "Writable typed constants"
msgstr "Skrivbare typede konstander"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:273
msgid "Runtime type information"
msgstr "Typeinformasjon under kjøring"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:275
msgid "Imported data references"
msgstr "Importerte datareferanser"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:279
msgid "Overflow checking"
msgstr "Sjekk for overløp"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:320
msgid "Enable optimizations"
msgstr "Slå på optimeringer"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:329
msgid "Debug information"
msgstr "Feilsøkingsinformasjon"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:331
msgid "Local symbol information"
msgstr "Lokal symbolinformasjon"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:333
msgid "Debug information for GDB"
msgstr "Feilsøkingsinformasjon for GDB"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:335
msgid "Namespace debug info"
msgstr "Feilsøkingsinformasjon for navneområder"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:337
msgid "Write symbol info in an .rsm file"
msgstr "Skriv symboler til en .rsm-fil"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:341
msgid "Symbol Reference Information"
msgstr "Symbolreferanse-informasjon"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:342
msgid "Default (-$YD)"
msgstr "Standard (-$YD)"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:345
msgid "No information"
msgstr "Ingen informasjon"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:347
msgid "Definition information"
msgstr "Definisjonsinformasjon"
#: languages/pascal/compiler/dccoptions/optiontabs.cpp:349
msgid "Full reference information"
msgstr "Fullstendig referanse-informasjon"
#: languages/pascal/compiler/dccoptions/dccoptionsplugin.cpp:46
msgid "Delphi Compiler Options"
msgstr "Delphi kompilatorflagg"
#: languages/java/problemreporter.cpp:238
msgid "Java Parsing"
msgstr "Java-tolking"
#: languages/java/javasupportpart.cpp:164
msgid "<b>New Class</b>Generates a new class.<p>"
msgstr "<b>Ny klasse</b> Lager en ny klasse.<p>"
#: languages/java/javasupportpart.cpp:713
msgid "Java Support"
msgstr "Java-støtte"
#: languages/java/javasupportpart.cpp:713
msgid "Keep Them"
msgstr "Behold dem"
#: vcs/subversion/svn_tdeio.cpp:226
#, c-format
msgid "Username and Password for %1."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:1385
msgid "Nothing to commit."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:1387
#, c-format
msgid "Committed revision %1."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:1587
#, fuzzy, c-format
msgid "Copied Revision %1"
msgstr "Revisjon A:"
#: vcs/subversion/svn_tdeio.cpp:1590
#, fuzzy
msgid "Copied"
msgstr "Ko&mpilator"
#: vcs/subversion/svn_tdeio.cpp:1698
msgid ""
"The certificate from the server could not be trusted automatically. Do you "
"want to trust this certificate? "
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:1903
#, fuzzy, c-format
msgid "A (bin) %1"
msgstr "Vis i %1"
#: vcs/subversion/svn_tdeio.cpp:1905 vcs/subversion/svn_tdeio.cpp:1938
#, fuzzy, c-format
msgid "A %1"
msgstr "Legg til %1"
#: vcs/subversion/svn_tdeio.cpp:1908
msgid "Copied %1 "
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:1912 vcs/subversion/svn_tdeio.cpp:1934
#, fuzzy, c-format
msgid "D %1"
msgstr "hw %1"
#: vcs/subversion/svn_tdeio.cpp:1915
#, fuzzy, c-format
msgid "Restored %1."
msgstr "&Gjenopprett"
#: vcs/subversion/svn_tdeio.cpp:1918
#, fuzzy, c-format
msgid "Reverted %1."
msgstr "Tilbakestill"
#: vcs/subversion/svn_tdeio.cpp:1921
msgid ""
"Failed to revert %1.\n"
"Try updating instead."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:1924
#, fuzzy, c-format
msgid "Resolved conflicted state of %1."
msgstr "Lø&s opp konflikt"
#: vcs/subversion/svn_tdeio.cpp:1928
#, c-format
msgid "Skipped missing target %1."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:1930
#, c-format
msgid "Skipped %1."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:1983
#, c-format
msgid "Exported external at revision %1."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:1985
#, fuzzy, c-format
msgid "Exported revision %1."
msgstr "Utvid forkortelse"
#: vcs/subversion/svn_tdeio.cpp:1988
#, c-format
msgid "Checked out external at revision %1."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:1990
#, c-format
msgid "Checked out revision %1."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:1994
#, c-format
msgid "Updated external to revision %1."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:1996
#, c-format
msgid "Updated to revision %1."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:1999
#, fuzzy, c-format
msgid "External at revision %1."
msgstr "Eksterne biblioteker"
#: vcs/subversion/svn_tdeio.cpp:2001
#, fuzzy, c-format
msgid "At revision %1."
msgstr "Versjon %1"
#: vcs/subversion/svn_tdeio.cpp:2007
#, fuzzy
msgid "External export complete."
msgstr "Eksterne verktøy"
#: vcs/subversion/svn_tdeio.cpp:2009
msgid "Export complete."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:2012
#, fuzzy
msgid "External checkout complete."
msgstr "Slå på kod&efullføring"
#: vcs/subversion/svn_tdeio.cpp:2014
#, fuzzy
msgid "Checkout complete."
msgstr "Sjekk ut &fra:"
#: vcs/subversion/svn_tdeio.cpp:2017
#, fuzzy
msgid "External update complete."
msgstr "Slå på kod&efullføring"
#: vcs/subversion/svn_tdeio.cpp:2019
#, fuzzy
msgid "Update complete."
msgstr "Oppdater valgt element"
#: vcs/subversion/svn_tdeio.cpp:2029
#, fuzzy, c-format
msgid "Fetching external item into %1."
msgstr "Start i ekstern terminal"
#: vcs/subversion/svn_tdeio.cpp:2033
#, c-format
msgid "Status against revision: %1."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:2036
#, c-format
msgid "Performing status on external item at %1."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:2039
#, fuzzy, c-format
msgid "Sending %1"
msgstr "Åpner: %1"
#: vcs/subversion/svn_tdeio.cpp:2043
#, fuzzy, c-format
msgid "Adding (bin) %1."
msgstr "Legger til fil: %1"
#: vcs/subversion/svn_tdeio.cpp:2045
#, fuzzy, c-format
msgid "Adding %1."
msgstr "Legg til %1"
#: vcs/subversion/svn_tdeio.cpp:2049
#, c-format
msgid "Deleting %1."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:2052
#, c-format
msgid "Replacing %1."
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:2057
msgid "Transmitting file data "
msgstr ""
#: vcs/subversion/svn_tdeio.cpp:2065
#, c-format
msgid "Blame %1."
msgstr ""
#: vcs/subversion/svn_blamewidget.cpp:36
#: vcs/subversion/svn_logviewwidget.cpp:51
#, fuzzy
msgid "Rev"
msgstr "Tilbakestill"
#: vcs/subversion/svn_blamewidget.cpp:39
#, fuzzy
msgid "Content"
msgstr "Koble til"
#: vcs/subversion/svn_blamewidget.cpp:91
msgid "Select one file to view annotation"
msgstr ""
#: vcs/subversion/svn_blamewidget.cpp:95
#, fuzzy
msgid "files"
msgstr "Tag-filer"
#: vcs/subversion/svn_blamewidget.cpp:129
msgid "Select file from list to view annotation"
msgstr ""
#: vcs/subversion/subversion_widget.cpp:38
#, fuzzy
msgid "Notification"
msgstr "Ingen optimering"
#: vcs/subversion/subversion_widget.cpp:63
#, fuzzy
msgid "Log History"
msgstr "Lokal mappe"
#: vcs/subversion/subversion_widget.cpp:72
#, fuzzy
msgid "Blame"
msgstr "Navn"
#: vcs/subversion/subversion_widget.cpp:121
#, fuzzy
msgid "Subversion Job Progress"
msgstr "Nytt Subversion-prosjekt"
#: vcs/subversion/subversion_fileinfo.cpp:160
msgid "Subversion File/Directory Status"
msgstr ""
#: vcs/subversion/svn_logviewwidget.cpp:131
#, fuzzy
msgid "Blame this revision"
msgstr "Beregn uttrykket."
#: vcs/subversion/svn_logviewwidget.cpp:132
#, fuzzy
msgid "Difference to previous revision"
msgstr "&Forskjell mellom revisjoner"
#: vcs/subversion/svn_logviewwidget.cpp:138
#: vcs/subversion/svn_logviewwidget.cpp:181
msgid "No revision was clicked"
msgstr ""
#: vcs/subversion/svn_logviewwidget.cpp:138
#: vcs/subversion/svn_logviewwidget.cpp:181
#, fuzzy
msgid "error"
msgstr "Feil"
#: vcs/subversion/subversion_part.cpp:86
msgid "Subversion Output"
msgstr "Subversion utdata"
#: vcs/subversion/subversion_part.cpp:87
#: vcs/subversion/subversion_part.cpp:261
msgid "Subversion"
msgstr "Subversion"
#: vcs/subversion/subversion_part.cpp:87
msgid "Subversion messages"
msgstr "Subversion meldinger"
#: vcs/subversion/subversion_part.cpp:88
msgid "<b>Subversion</b><p>Subversion operations window."
msgstr "<b>Subversion</b><p>Subversion handlingsvindu"
#: vcs/subversion/subversion_part.cpp:101
#, fuzzy
msgid "&Commit to Repository..."
msgstr "&Meld inn til arkivet"
#: vcs/cvsservice/cvspart.cpp:148 vcs/subversion/subversion_part.cpp:102
msgid "Commit file(s)"
msgstr "Meld inn fil(er)"
#: vcs/cvsservice/cvspart.cpp:149 vcs/cvsservice/cvspart.cpp:324
#: vcs/subversion/subversion_part.cpp:103
#: vcs/subversion/subversion_part.cpp:223
msgid "<b>Commit file(s)</b><p>Commits file to repository if modified."
msgstr ""
"<b>Meld inn fil(er)</b>"
"<p>Melder inn fil til arkivet hvis den er endret."
#: vcs/cvsservice/cvspart.cpp:166 vcs/subversion/subversion_part.cpp:110
msgid "&Add to Repository"
msgstr "&Legg til i arkivet"
#: vcs/cvsservice/cvspart.cpp:168 vcs/subversion/subversion_part.cpp:111
msgid "Add file to repository"
msgstr "Legg til fil i arkivet"
#: vcs/subversion/subversion_part.cpp:112
#: vcs/subversion/subversion_part.cpp:225
msgid "<b>Add file to repository</b><p>Adds file to repository."
msgstr "<b>Legg til fil i arkivet</b><p>Legger til fila i arkivet."
#: vcs/subversion/subversion_part.cpp:114
#, fuzzy
msgid "Show logs..."
msgstr "S&lots …"
#: vcs/subversion/subversion_part.cpp:115
#, fuzzy
msgid "Blame..."
msgstr "S&ide ved side …"
#: vcs/cvsservice/cvspart.cpp:191 vcs/subversion/subversion_part.cpp:117
msgid "&Remove From Repository"
msgstr "Fje&rn fra arkivet"
#: vcs/cvsservice/cvspart.cpp:193 vcs/perforce/perforcepart.cpp:83
#: vcs/subversion/subversion_part.cpp:118
msgid "Remove from repository"
msgstr "Fjern fra arkivet"
#: vcs/cvsservice/cvspart.cpp:194 vcs/cvsservice/cvspart.cpp:346
#: vcs/subversion/subversion_part.cpp:119
#: vcs/subversion/subversion_part.cpp:227
msgid "<b>Remove from repository</b><p>Removes file(s) from repository."
msgstr "<b>Fjern fra arkivet</b><p>Fjerner fil(er) fra arkivet."
#: vcs/subversion/subversion_part.cpp:122
msgid "Update"
msgstr "Oppdater"
#: vcs/subversion/subversion_part.cpp:123
#: vcs/subversion/subversion_part.cpp:241
msgid "<b>Update</b><p>Updates file(s) from repository."
msgstr "<b>Oppdater</b><p>Oppdaterer fil(er) fra arkivet."
#: vcs/subversion/subversion_part.cpp:125
#, fuzzy
msgid "&Diff to BASE"
msgstr "Forskjell mot fil på disk"
#: vcs/subversion/subversion_part.cpp:126
#, fuzzy
msgid "Diff to BASE"
msgstr "Forskjell mot fil på disk"
#: vcs/subversion/subversion_part.cpp:127
msgid "<b>Diff to disk</b><p>Diff current file to the BASE checked out copy."
msgstr ""
#: vcs/subversion/subversion_part.cpp:129
msgid "&Diff to HEAD"
msgstr ""
#: vcs/subversion/subversion_part.cpp:130
msgid "Diff to HEAD"
msgstr ""
#: vcs/subversion/subversion_part.cpp:131
msgid "<b>Diff HEAD</b><p>Diff the current file to HEAD in svn."
msgstr ""
#: vcs/subversion/subversion_part.cpp:134
msgid "&Revert"
msgstr "&Tilbakestill"
#: vcs/perforce/perforcepart.cpp:61 vcs/perforce/perforcepart.cpp:63
#: vcs/perforce/perforcepart.cpp:102 vcs/perforce/perforcepart.cpp:156
#: vcs/subversion/subversion_part.cpp:135
msgid "Revert"
msgstr "Tilbakestill"
#: vcs/subversion/subversion_part.cpp:136
#: vcs/subversion/subversion_part.cpp:243
msgid "<b>Revert</b><p>Undo local changes."
msgstr "<b>Tilbakestill</b><p>Tilbakestill lokale endringer."
#: vcs/subversion/subversion_part.cpp:149
msgid "Re&solve Conflicting State"
msgstr "Lø&s opp konflikt"
#: vcs/subversion/subversion_part.cpp:151
msgid "Resolve the conflicting state of a file after a merge"
msgstr "Løs opp konflikt-tilstand i en fil etter en fletting"
#: vcs/subversion/subversion_part.cpp:152
msgid ""
"<b>Resolve the conflicting state</b>"
"<p>Remove the conflict state that can be set on a file after a merge failed."
msgstr ""
"<b>Løs opp konflikt</b>"
"<p>Fjern konflikt-status som kan settes på en fil etter en mislykket fletting."
#: vcs/subversion/subversion_part.cpp:153
msgid "Switch this working copy to URL.."
msgstr ""
#: vcs/subversion/subversion_part.cpp:156
msgid "Copy this working copy to URL.."
msgstr ""
#: vcs/subversion/subversion_part.cpp:158
#, fuzzy
msgid "Merge difference to working copy"
msgstr "Det er ingen forskjell i forhold til arkivet."
#: vcs/subversion/subversion_part.cpp:229
msgid "<b>Show logs..</b><p>View Logs"
msgstr ""
#: vcs/subversion/subversion_part.cpp:231
msgid "<b>Blame 0:HEAD </b><p>Show Annotate"
msgstr ""
#: vcs/subversion/subversion_part.cpp:235
msgid "<b>Diff</b><p>Diff file to local disk."
msgstr ""
#: vcs/subversion/subversion_part.cpp:238
#, fuzzy
msgid "<b>Diff</b><p>Diff file to repository."
msgstr "<b>Legg til i arkivet</b><p>Legger til fila i arkivet."
#: vcs/subversion/subversion_part.cpp:245
msgid "<b>Resolve</b><p>Resolve conflicting state."
msgstr "<b>Løs opp</b><p>Løs opp konflikt-tilstand."
#: vcs/subversion/subversion_part.cpp:247
msgid "<b>Switch</b><p>Switch working tree."
msgstr ""
#: vcs/subversion/subversion_part.cpp:249
msgid "<b>Copy</b><p>Copy from/between path/URLs"
msgstr ""
#: vcs/subversion/subversion_part.cpp:251
msgid "<b>Merge</b><p>Merge difference to working copy"
msgstr ""
#: vcs/subversion/subversion_part.cpp:304
#: vcs/subversion/subversion_part.cpp:345
msgid "Please select only one item for subversion switch"
msgstr ""
#: vcs/subversion/subversion_part.cpp:327
#, fuzzy
msgid "The destination URL is invalid"
msgstr "Uttrykket er ikke gyldig."
#: vcs/subversion/subversion_part.cpp:337
msgid "Fail to conduct subversion switch. No action was selected"
msgstr ""
#: vcs/subversion/subversion_part.cpp:380
msgid "Please select only one item for subversion merge"
msgstr ""
#: vcs/subversion/subversion_part.cpp:462
msgid "Please select only one item for subversion log"
msgstr ""
#: vcs/subversion/subversion_part.cpp:481
msgid "Please select only one item to see annotate"
msgstr ""
#: vcs/subversion/subversion_part.cpp:486
msgid "Select file to see blame"
msgstr ""
#: vcs/subversion/subversion_part.cpp:504
#: vcs/subversion/subversion_part.cpp:514
#, fuzzy
msgid "Select file or directory to see diff"
msgstr "Ingen slik fil eller katalog."
#: vcs/subversion/subversion_core.cpp:146
#, fuzzy
msgid "Subversion Update"
msgstr "Subversion utdata"
#: vcs/subversion/subversion_core.cpp:222
msgid "the local disk checked out copy."
msgstr ""
#: vcs/subversion/subversion_core.cpp:224
#, fuzzy
msgid "the current svn HEAD version."
msgstr "Kompletter gjeldende uttrykk"
#: vcs/subversion/subversion_core.cpp:226
#, fuzzy, c-format
msgid "No differences between the file and %1"
msgstr "Diff mellom %1 og %2"
#: vcs/subversion/subversion_core.cpp:226
#, fuzzy
msgid "No difference"
msgstr "Bygg forskjell"
#: vcs/subversion/subversion_core.cpp:266
#: vcs/subversion/subversion_core.cpp:268
#, fuzzy
msgid "Commit to remote repository"
msgstr "Legg til i arkivet"
#: vcs/subversion/subversion_core.cpp:268
msgid "From working copy"
msgstr ""
#: vcs/subversion/subversion_core.cpp:320
#, fuzzy
msgid "Subversion Blame"
msgstr "Subversion"
#: vcs/subversion/subversion_core.cpp:509
#: vcs/subversion/subversion_core.cpp:538
#: vcs/subversion/subversion_core.cpp:598
#: vcs/subversion/subversion_core.cpp:668
msgid ""
"If you have just have installed a new version of TDevelop, and the error "
"message was 'unknown protocol kdevsvn+*', try restarting TDE."
msgstr ""
#: vcs/subversion/subversion_core.cpp:703
msgid ""
"You do not have kompare installed. We recommend you install kompare to view "
"differences graphically."
msgstr ""
#: vcs/subversion/subversion_core.cpp:715
#, fuzzy
msgid "No subversion differences"
msgstr "Nytt Subversion-prosjekt"
#: vcs/subversion/kdevsvnd.cpp:52
#, fuzzy
msgid "Enter Commit Log Message:"
msgstr "Skriv loggmelding:"
#: vcs/subversion/kdevsvnd.cpp:74
msgid "Open SSL certificate file"
msgstr ""
#: vcs/subversion/svn_fileselectdlg_commit.cpp:41
msgid "Select Files to Commit"
msgstr ""
#: vcs/subversion/svn_fileselectdlg_commit.cpp:43
#, fuzzy
msgid "select"
msgstr "&Velg"
#: vcs/subversion/svn_fileselectdlg_commit.cpp:44
#, fuzzy
msgid "status"
msgstr "Status"
#: vcs/subversion/svn_fileselectdlg_commit.cpp:45
msgid "URL to commit"
msgstr ""
#: vcs/subversion/svn_fileselectdlg_commit.cpp:119
msgid "No added/modified/deleted file(s) to commit"
msgstr ""
#: vcs/subversion/kdevsvnd_widgets.cpp:27
msgid "Accept Permanently"
msgstr ""
#: vcs/subversion/kdevsvnd_widgets.cpp:28
#, fuzzy
msgid "Accept Temporarily"
msgstr " midlertidig"
#: vcs/subversion/kdevsvnd_widgets.cpp:29
#, fuzzy
msgid "Reject"
msgstr "Rekt"
#: vcs/subversion/kdevsvnd_widgets.cpp:40
#, fuzzy
msgid "Hostname"
msgstr "&Vertsnavn:"
#: vcs/subversion/kdevsvnd_widgets.cpp:41
msgid "FingerPrint"
msgstr ""
#: vcs/subversion/kdevsvnd_widgets.cpp:42
msgid "Valid From"
msgstr ""
#: vcs/subversion/kdevsvnd_widgets.cpp:43
msgid "Valid Until"
msgstr ""
#: vcs/subversion/kdevsvnd_widgets.cpp:44
#, fuzzy
msgid "Issuer"
msgstr "Vis advarsler"
#: vcs/subversion/kdevsvnd_widgets.cpp:45
#, fuzzy
msgid "Cert"
msgstr "Tilbakestill"
#: vcs/subversion/integrator/svnintegratordlg.cpp:73
#, fuzzy
msgid "Unable to create project directories on repository"
msgstr "Filtrevisning i prosjektmappa"
#: vcs/subversion/integrator/svnintegratordlg.cpp:84
#, fuzzy
msgid "Unable to import into repository."
msgstr "Opprett modul i arkivet"
#: vcs/subversion/integrator/svnintegratordlg.cpp:106
#, fuzzy
msgid "Unable to checkout from repository."
msgstr "Fjern fra arkivet"
#: vcs/perforce/perforcepart.cpp:60 vcs/perforce/perforcepart.cpp:101
msgid "<b>Edit</b><p>Opens file(s) in a client workspace for edit."
msgstr ""
"<b>Rediger</b>"
"<p>Åpner fil(er) for redigering i et arbeidsområde på klienten."
#: vcs/perforce/perforcepart.cpp:64 vcs/perforce/perforcepart.cpp:104
msgid "<b>Revert</b><p>Discards changes made to open files."
msgstr "<b>Tilbakestill</b><p>Kasserer endringer gjort på åpne filer."
#: vcs/perforce/perforcepart.cpp:65 vcs/perforce/perforcepart.cpp:67
#: vcs/perforce/perforcepart.cpp:105
msgid "Submit"
msgstr "Send inn"
#: vcs/perforce/perforcepart.cpp:68 vcs/perforce/perforcepart.cpp:107
msgid "<b>Submit</b><p>Sends changes made to open files to the depot."
msgstr "<b>Send inn</b><p> Sender endringer gjort i åpne filer til depotet."
#: vcs/perforce/perforcepart.cpp:69 vcs/perforce/perforcepart.cpp:71
#: vcs/perforce/perforcepart.cpp:108
msgid "Sync"
msgstr "Synkroniser"
#: vcs/perforce/perforcepart.cpp:72 vcs/perforce/perforcepart.cpp:110
msgid "<b>Sync</b><p>Copies files from the depot into the workspace."
msgstr "<b>Synkroniser</b><p> Kopierer filer fra depotet til arbeidsområdet."
#: vcs/perforce/perforcepart.cpp:73 vcs/perforce/perforcepart.cpp:112
msgid "Diff Against Repository"
msgstr "Diff mot arkiv"
#: vcs/perforce/perforcepart.cpp:75
msgid "Diff against repository"
msgstr "Diff mot arkivet"
#: vcs/perforce/perforcepart.cpp:76 vcs/perforce/perforcepart.cpp:114
msgid ""
"<b>Diff against repository</b>"
"<p>Compares a client workspace file to a revision in the depot."
msgstr ""
"<b>Diff mot arkivet</b>"
"<p>Sammenlikner en fil i klientens arbeidsområde med en revisjon i depotet."
#: vcs/perforce/perforcepart.cpp:77 vcs/perforce/perforcepart.cpp:115
msgid "Add to Repository"
msgstr "Legg til i arkivet"
#: vcs/perforce/perforcepart.cpp:79
msgid "Add to repository"
msgstr "Legg til arkivet"
#: vcs/perforce/perforcepart.cpp:80 vcs/perforce/perforcepart.cpp:117
msgid ""
"<b>Add to repository</b>"
"<p>Open file(s) in a client workspace for addition to the depot."
msgstr ""
"<b>Legg til arkivet</b>"
"<p>Åpne fil(er) i et arbeidsområde for innlegging i depotet."
#: vcs/perforce/perforcepart.cpp:81 vcs/perforce/perforcepart.cpp:118
msgid "Remove From Repository"
msgstr "Fjern fra arkivet"
#: vcs/perforce/perforcepart.cpp:84 vcs/perforce/perforcepart.cpp:120
msgid ""
"<b>Remove from repository</b>"
"<p>Open file(s) in a client workspace for deletion from the depot."
msgstr ""
"<b>Fjern fra arkivet</b>"
"<p>Åpne fil(er) i arbeidsområdet for sletting fra depotet."
#: vcs/clearcase/clearcasepart.cpp:89 vcs/perforce/perforcepart.cpp:97
#, c-format
msgid "Actions for %1"
msgstr "Handlinger for %1"
#: vcs/perforce/perforcepart.cpp:121
msgid "Perforce"
msgstr "Perforce"
#: vcs/perforce/perforcepart.cpp:132
msgid "Cannot handle directories, please select single files"
msgstr "Kan ikke håndtere mapper, velg enkeltfiler"
#: vcs/perforce/perforcepart.cpp:155
msgid "Do you really want to revert the file %1 and lose all your changes?"
msgstr ""
"Er du sikker på at du vil tilbakestille fila %1 og miste alle endringene dine?"
#: vcs/perforce/perforcepart.cpp:156
msgid "Do Not Revert"
msgstr "Ikke tilbakestill"
#: vcs/perforce/perforcepart.cpp:168
msgid "Submitting of subdirectories is not supported"
msgstr "Det er ikke støtte for innsjekking av undermapper"
#: vcs/perforce/perforcepart.cpp:258
msgid "P4 output errors during diff."
msgstr "P4 returnerte feil under diff."
#: vcs/clearcase/clearcasepart.cpp:320 vcs/clearcase/clearcasepart.cpp:326
#: vcs/cvsservice/cvspartimpl.cpp:941 vcs/cvsservice/cvspartimpl.cpp:949
#: vcs/perforce/perforcepart.cpp:258 vcs/perforce/perforcepart.cpp:264
msgid "Errors During Diff"
msgstr "Feil under diff-kjøring"
#: vcs/perforce/perforcepart.cpp:263
msgid "P4 output errors during diff. Do you still want to continue?"
msgstr "P4 returnerte feil under diff. Vil du fortsette likevel?"
#: vcs/clearcase/clearcasepart.cpp:332 vcs/cvsservice/cvspartimpl.cpp:957
#: vcs/perforce/perforcepart.cpp:270
msgid "There is no difference to the repository."
msgstr "Det er ingen forskjell i forhold til arkivet."
#: vcs/perforce/perforcepart.cpp:270
msgid "No Differences Found"
msgstr "Fant ingen forskjeller"
#: vcs/perforce/commitdlg.cpp:32
msgid "Perforce Submit"
msgstr "Perforce innsjekk"
#: vcs/perforce/commitdlg.cpp:42
msgid "&Enter description:"
msgstr "Oppgi b&eskrivelse:"
#: vcs/perforce/commitdlg.cpp:54
msgid "C&lient:"
msgstr "K&lient:"
#: vcs/perforce/commitdlg.cpp:58
msgid "&User:"
msgstr "&Bruker:"
#: vcs/perforce/commitdlg.cpp:62
msgid "&File(s):"
msgstr "&Fil(er):"
#: vcs/perforce/commitdlg.cpp:147
msgid "Please enter the P4 client name."
msgstr "Oppgi P4-klientens navn."
#: vcs/perforce/commitdlg.cpp:151
msgid "Please enter the P4 user."
msgstr "Oppgi P4-bruker."
#: vcs/perforce/commitdlg.cpp:155
msgid "The changelist does not contain any files."
msgstr "Det er ingen filer i endringslista."
#: vcs/clearcase/commentdlg.cpp:26
msgid "Clearcase Comment"
msgstr "Clearcase-kommentar"
#: vcs/clearcase/commentdlg.cpp:30
msgid "Enter log message:"
msgstr "Skriv loggmelding:"
#: vcs/clearcase/commentdlg.cpp:41
msgid "Reserve"
msgstr "Reserve"
#: vcs/clearcase/clearcasepart.cpp:90
msgid "Checkin"
msgstr "Sjekk inn"
#: vcs/clearcase/clearcasepart.cpp:92
msgid "Checkout"
msgstr "Sjekk ut"
#: vcs/clearcase/clearcasepart.cpp:94
msgid "Uncheckout"
msgstr "Angre utsjekking"
#: vcs/clearcase/clearcasepart.cpp:97
msgid "Create Element"
msgstr "Opprett element"
#: vcs/clearcase/clearcasepart.cpp:99
msgid "Remove Element"
msgstr "Fjern element"
#: vcs/clearcase/clearcasepart.cpp:102
#, fuzzy
msgid "History"
msgstr "Mappe"
#: vcs/clearcase/clearcasepart.cpp:109
#, fuzzy
msgid "List Checkouts"
msgstr "Sjekk ut"
#: vcs/clearcase/clearcasepart.cpp:112
msgid "Clearcase"
msgstr "Clearcase"
#: vcs/clearcase/clearcasepart.cpp:320
msgid "Clearcase output errors during diff."
msgstr "Feilmeldinger fra Clearcase under diff-kjøring."
#: vcs/clearcase/clearcasepart.cpp:325
msgid "Clearcase outputted errors during diff. Do you still want to continue?"
msgstr "Clearcase ga feilmeldinger under diff. Vil du likevel fortsette?"
#: vcs/clearcase/clearcasepart.cpp:332 vcs/cvsservice/cvspartimpl.cpp:958
msgid "No Difference Found"
msgstr "Ingen forskjell funnet"
#: vcs/cvsservice/cvspart.cpp:133
msgid ""
"<b>CVS</b>"
"<p>Concurrent Versions System operations window. Shows output of Cervisia CVS "
"Service."
msgstr ""
"<b>CVS</b>"
"<p>Kjørevindu for Concurrent Versions System. Viser utdata fra Cervisia "
"CVS-tjeneste."
#: vcs/cvsservice/cvspart.cpp:134
msgid "CvsService Output"
msgstr "Utdata fra CvsService"
#: vcs/cvsservice/cvspart.cpp:135 vcs/cvsservice/cvspart.cpp:279
#: vcs/cvsservice/cvspart.cpp:365
msgid "CvsService"
msgstr "CvsService"
#: vcs/cvsservice/cvspart.cpp:135
msgid "cvs output"
msgstr "cvs utdata"
#: vcs/cvsservice/cvspart.cpp:146
msgid "&Commit to Repository"
msgstr "&Meld inn til arkivet"
#: vcs/cvsservice/cvspart.cpp:151
msgid "&Difference Between Revisions"
msgstr "&Forskjell mellom revisjoner"
#: vcs/cvsservice/cvspart.cpp:153
msgid "Build difference"
msgstr "Bygg forskjell"
#: vcs/cvsservice/cvspart.cpp:154 vcs/cvsservice/cvspart.cpp:329
msgid "<b>Build difference</b><p>Builds difference between releases."
msgstr "<b>Bygg forskjell</b><p>Bygger forskjell mellom utgivelser."
#: vcs/cvsservice/cvspart.cpp:156
msgid "Generate &Log"
msgstr "Lag &logg"
#: vcs/cvsservice/cvspart.cpp:158
msgid "Generate log"
msgstr "Lag logg"
#: vcs/cvsservice/cvspart.cpp:159 vcs/cvsservice/cvspart.cpp:331
msgid "<b>Generate log</b><p>Produces log for this file."
msgstr "<b>Lag logg</b><p>Produserer en logg for denne fila."
#: vcs/cvsservice/cvspart.cpp:161
msgid "&Annotate"
msgstr "&Merknad"
#: vcs/cvsservice/cvspart.cpp:163
msgid "Generate annotations"
msgstr "Lag merknader"
#: vcs/cvsservice/cvspart.cpp:164
msgid "<b>Annotate</b><p>Produces annotations for this file."
msgstr "<b>Merknad</b><p>Lager merknader for denne fila."
#: vcs/cvsservice/cvspart.cpp:169 vcs/cvsservice/cvspart.cpp:342
msgid "<b>Add to repository</b><p>Adds file to repository."
msgstr "<b>Legg til i arkivet</b><p>Legger til fila i arkivet."
#: vcs/cvsservice/cvspart.cpp:171
msgid "&Edit Files"
msgstr "R&ediger filer"
#: vcs/cvsservice/cvspart.cpp:173
msgid "Mark as being edited"
msgstr "Merk som under redigering"
#: vcs/cvsservice/cvspart.cpp:174
msgid "<b>Mark as being edited</b><p>Mark the files as being edited."
msgstr "<b>Merk som under redigering</b><p>Merk filene som under redigering."
#: vcs/cvsservice/cvspart.cpp:176
msgid "&Unedit Files"
msgstr "&Urediger filer"
#: vcs/cvsservice/cvspart.cpp:178
msgid "Remove editing mark from files"
msgstr "Fjern redigeringsmerket fra filer"
#: vcs/cvsservice/cvspart.cpp:179 vcs/cvsservice/cvspart.cpp:340
msgid "<b>Remove editing mark</b><p>Remove the editing mark from the files."
msgstr "<b>Fjern redigeringsmerke</b><p>Fjern redigeringsmerket fra filene."
#: vcs/cvsservice/cvspart.cpp:181
msgid "&Show Editors"
msgstr "Vi&s redigerere"
#: vcs/cvsservice/cvspart.cpp:183
msgid "Show editors"
msgstr "Vis redigerere"
#: vcs/cvsservice/cvspart.cpp:184 vcs/cvsservice/cvspart.cpp:336
msgid "<b>Show editors</b><p>Shows the list of users who are editing files."
msgstr "<b>Vis redigerere</b><p>Vis liste over brukere som redigerer filer."
#: vcs/cvsservice/cvspart.cpp:186
msgid "Add to Repository as &Binary"
msgstr "Legg til i arkivet som &binærfil"
#: vcs/cvsservice/cvspart.cpp:188
msgid "Add file to repository as binary"
msgstr "Legg til i arkivet som binærfil"
#: vcs/cvsservice/cvspart.cpp:189 vcs/cvsservice/cvspart.cpp:344
msgid ""
"<b>Add to repository as binary</b>"
"<p>Adds file to repository as binary (-kb option)."
msgstr ""
"<b>Legg til i arkivet som binærfil</b>"
"<p>Legger fila til i akivet som binær (-kb )"
#: vcs/cvsservice/cvspart.cpp:196
msgid "&Update/Revert to Another Release"
msgstr "&Oppdater/tilbakestill til en annen utgave"
#: vcs/cvsservice/cvspart.cpp:198
msgid "Update/revert"
msgstr "Oppdater/tilbakestill"
#: vcs/cvsservice/cvspart.cpp:199 vcs/cvsservice/cvspart.cpp:354
msgid ""
"<b>Update/revert to another release</b>"
"<p>Updates/reverts file(s) to another release."
msgstr ""
"<b>Oppdater/tilbakestill til en annen utgave</b>"
"<p>Oppdaterer/tilbakestiller fil(er) til en annen utgave."
#: vcs/cvsservice/cvspart.cpp:201
msgid "R&emove Sticky Flag"
msgstr "Fj&ern fast-merket"
#: vcs/cvsservice/cvspart.cpp:203
msgid "Remove sticky flag"
msgstr "Fjern fast-merket"
#: vcs/cvsservice/cvspart.cpp:204 vcs/cvsservice/cvspart.cpp:356
msgid "<b>Remove sticky flag</b><p>Removes sticky flag from file(s)."
msgstr "<b>Fjern fast-merket</b><p>Fjerner fast-merket fra fila/filene"
#: vcs/cvsservice/cvspart.cpp:206
msgid "Make &Tag/Branch"
msgstr "Lag &merke/gren"
#: vcs/cvsservice/cvspart.cpp:208
msgid "Make tag/branch"
msgstr "Lag merke/gren"
#: vcs/cvsservice/cvspart.cpp:209 vcs/cvsservice/cvspart.cpp:350
msgid "<b>Make tag/branch</b><p>Tags/branches selected file(s)."
msgstr "<b>Lag merke/gren</b><p>Legger valgt(e) fil(er) i merke/gren."
#: vcs/cvsservice/cvspart.cpp:211
#, fuzzy
msgid "&Delete Tag"
msgstr "Slett side"
#: vcs/cvsservice/cvspart.cpp:213
#, fuzzy
msgid "Delete tag"
msgstr "Slett side"
#: vcs/cvsservice/cvspart.cpp:214 vcs/cvsservice/cvspart.cpp:352
#, fuzzy
msgid "<b>Delete tag</b><p>Delete tag from selected file(s)."
msgstr "<b>Slett merke/gren</b><p>Sletter merker/grener fra valgt(e) fil(er)."
#: vcs/cvsservice/cvspart.cpp:216
msgid "&Ignore in CVS Operations"
msgstr "&Ignorer i CVS-handlinger"
#: vcs/cvsservice/cvspart.cpp:218
msgid "Ignore in CVS operations"
msgstr "Ignorer i CVS-handlinger"
#: vcs/cvsservice/cvspart.cpp:219 vcs/cvsservice/cvspart.cpp:360
msgid ""
"<b>Ignore in CVS operations</b>"
"<p>Ignore file(s) by adding it to .cvsignore file."
msgstr ""
"<b>Ignorer i CVS-handlinger</b>"
"<p> Ignorer fil(er) ved å legge til i .cvsignore-fila."
#: vcs/cvsservice/cvspart.cpp:221
msgid "Do &Not Ignore in CVS Operations"
msgstr "I&kke ignorer i CVS-handlinger"
#: vcs/cvsservice/cvspart.cpp:223
msgid "Do not ignore in CVS operations"
msgstr "Ikke ignorer i CVS-handlinger"
#: vcs/cvsservice/cvspart.cpp:224 vcs/cvsservice/cvspart.cpp:362
msgid ""
"<b>Do not ignore in CVS operations</b>"
"<p>Do not ignore file(s) by removing\n"
"it from .cvsignore file."
msgstr ""
"<b>Ikke ignorer i CVS-handlinger</b>"
"<p>Fjern filnavn(ene) fra .cvsignore-\n"
"fila."
#: vcs/cvsservice/cvspart.cpp:226
msgid "&Log to Server"
msgstr "&Logg inn til tjener"
#: vcs/cvsservice/cvspart.cpp:228
msgid "Login to server"
msgstr "Logg inn til tjener"
#: vcs/cvsservice/cvspart.cpp:229
msgid "<b>Login to server</b><p>Logs in to the CVS server."
msgstr "<b>Logg inn til tjener</b><p>Logger inn til CVS-tjeneren."
#: vcs/cvsservice/cvspart.cpp:231
msgid "L&ogout From Server"
msgstr "L&ogg ut fra tjener"
#: vcs/cvsservice/cvspart.cpp:233
msgid "Logout from server"
msgstr "Logg ut fra tjener"
#: vcs/cvsservice/cvspart.cpp:234
msgid "<b>Logout from server</b><p>Logs out from the CVS server."
msgstr "<b>Logg ut fra tjener</b><p> Logger ut fra CVS-tjeneren."
#: vcs/cvsservice/cvspart.cpp:333
msgid "<b>Generate Annotate</b><p>Produces annotation output for this file."
msgstr "<b>Lag merknad</b><p>Lager merknader for denne fila."
#: vcs/cvsservice/cvspart.cpp:338
msgid "<b>Mark as beeing edited</b><p>Mark the files as beeing edited."
msgstr ""
"<b>Merk som under redigering</b>"
"<p>Merk fila/filene som under redigering."
#: vcs/cvsservice/cvspartimpl.cpp:127
msgid ""
"Open a project first.\n"
"Operation will be aborted."
msgstr ""
"Åpne et prosjekt først.\n"
"Handlingen blir avbrutt."
#: vcs/cvsservice/cvspartimpl.cpp:134
msgid ""
"Another CVS operation is executing: do you want to cancel it \n"
"and start this new one?"
msgstr ""
"Det kjøres en annen CVS-handling: vil du avbryte den\n"
"og starte denne nye?"
#: vcs/cvsservice/cvspartimpl.cpp:136
msgid "CVS: Operation Already Pending "
msgstr "CVS: Handling allerede i gang"
#: vcs/cvsservice/cvspartimpl.cpp:151
msgid "None of the file(s) you selected seem to be valid for repository."
msgstr ""
"Det ser ikke ut til at noen fil(er) du har valgt er gyldige for arkivet."
#: vcs/cvsservice/cvspartimpl.cpp:370
msgid "Unable to checkout"
msgstr "Kan ikke sjekke ut"
#: vcs/cvsservice/cvspartimpl.cpp:519
msgid "Do you really want to unedit the selected files?"
msgstr "Er du sikker på at du vil ta de valgte filene ut av redigering?"
#: vcs/cvsservice/cvspartimpl.cpp:520
msgid "CVS - Unedit Files"
msgstr "CVS ta filer ut av redigering"
#: vcs/cvsservice/cvspartimpl.cpp:521
msgid "Unedit"
msgstr "U-editer"
#: vcs/cvsservice/cvspartimpl.cpp:522
msgid "Do Not Unedit"
msgstr "Ikke u-editer"
#: vcs/cvsservice/cvspartimpl.cpp:653
msgid "Sorry, cannot diff."
msgstr "Kan ikke ta diff."
#: vcs/cvsservice/cvsdiffpage.cpp:68 vcs/cvsservice/cvsdiffpage.cpp:101
#: vcs/cvsservice/cvspartimpl.cpp:654
msgid "Error During Diff"
msgstr "Feil oppsto under diff"
#: vcs/cvsservice/cvspartimpl.cpp:674
msgid "Creating Tag/Branch for files ..."
msgstr "Oppretter tag/branch for filer …"
#: vcs/cvsservice/cvspartimpl.cpp:698
#, fuzzy
msgid "Removing Tag from files ..."
msgstr "Fjerner tag/branch fra filer …"
#: vcs/cvsservice/cvspartimpl.cpp:791
#: vcs/cvsservice/integrator/integratordlg.cpp:101
msgid ""
"Unable to find the Cervisia KPart. \n"
"Cervisia Integration will not be available. Please check your\n"
"Cervisia installation and re-try. Reason was:\n"
msgstr ""
"Kan ikke finne Cervisia KPart.\n"
"Integrasjon med Cervisia er ikke tilgjengelig. Sjekk Cervisia-\n"
"installasjonen og forsøk igjen. Årsaken var: \n"
#: vcs/cvsservice/cvspartimpl.cpp:839
#, fuzzy
msgid "Do you want the files to be added to CVS repository too?"
msgstr "Vil du legge til i CVS-arkivet også?"
#: vcs/cvsservice/cvspartimpl.cpp:840
msgid "CVS - New Files Added to Project"
msgstr "CVS nye filer lagt til i prosjektet"
#: vcs/cvsservice/cvspartimpl.cpp:842
msgid "Do Not Add"
msgstr "Ikke legg til"
#: vcs/cvsservice/cvspartimpl.cpp:843
msgid "askWhenAddingNewFiles"
msgstr "askWhenAddingNewFiles"
#: vcs/cvsservice/cvspartimpl.cpp:865
msgid ""
"Do you want them to be removed from CVS repository too?\n"
"Warning: They will be removed from disk too."
msgstr ""
"Vil du at de skal slettes fra CVS-arkivet også?\n"
"Advarsel: De blir slettet fra disk også."
#: vcs/cvsservice/cvspartimpl.cpp:866
msgid "CVS - Files Removed From Project"
msgstr "CVS filer fjernet fra prosjektet"
#: vcs/cvsservice/cvspartimpl.cpp:868
msgid "askWhenRemovingFiles"
msgstr "askWhenRemovingFiles"
#: vcs/cvsservice/cvspartimpl.cpp:934
msgid "Operation aborted (process killed)."
msgstr "Operasjonen avbrutt (prosess drept)."
#: vcs/cvsservice/cvspartimpl.cpp:935
msgid "CVS Diff"
msgstr "CVS Diff"
#: vcs/cvsservice/cvspartimpl.cpp:940
msgid "CVS outputted errors during diff."
msgstr "CVS skrev ut feil under diff."
#: vcs/cvsservice/cvspartimpl.cpp:948
msgid "CVS output errors during diff. Do you still want to continue?"
msgstr "CVS ga feil under diff. Vil du fremdeles fortsette?"
#: vcs/cvsservice/cvsdiffpage.cpp:68
msgid "Error: passed revisions are empty!"
msgstr "Feil: passerte revisjoner er tomme!"
#: vcs/cvsservice/cvsdiffpage.cpp:101
msgid "An error occurred during diffing."
msgstr "Det oppsto en feil under diffing."
#: vcs/cvsservice/checkoutdialog.cpp:73
msgid "CVS Checkout"
msgstr "CVS Checkout"
#: vcs/cvsservice/checkoutdialog.cpp:263
msgid "Please, choose a valid working directory"
msgstr "Velg en gyldig mappe."
#: vcs/cvsservice/checkoutdialog.cpp:265
msgid "Please, choose a CVS server."
msgstr "Velg en CVS-tjener."
#: vcs/cvsservice/checkoutdialog.cpp:267
msgid "Please, fill the CVS module field."
msgstr "Fyll ut feltet CVS-modul."
#: vcs/cvsservice/cvsprocesswidget.cpp:145
#, c-format
msgid "Started job: %1"
msgstr "Startet jobb: %1"
#: vcs/cvsservice/cvsprocesswidget.cpp:167
msgid "*** Job canceled by user request ***"
msgstr "*** Jobb avbrutt på brukers anmodning ***"
#: vcs/cvsservice/cvsprocesswidget.cpp:189
#, c-format
msgid "Job finished with exitCode == %1"
msgstr "Jobb avsluttet med exitCode == %1"
#: vcs/cvsservice/cvsprocesswidget.cpp:193
msgid "Done CVS command ..."
msgstr "CVS-kommando ferdig …"
#: vcs/cvsservice/cvslogpage.cpp:116 vcs/cvsservice/editorsdialog.cpp:64
#, c-format
msgid "Log failed with exitStatus == %1"
msgstr "Logg mislyktes med status == %1"
#: vcs/cvsservice/cvslogpage.cpp:116 vcs/cvsservice/editorsdialog.cpp:64
msgid "Log Failed"
msgstr "Logg mislyktes"
#: vcs/cvsservice/editorsdialog.cpp:87 vcs/cvsservice/editorsdialog.cpp:100
msgid "User"
msgstr "Bruker"
#: vcs/cvsservice/editorsdialog.cpp:109
msgid "No files from your query are marked as being edited."
msgstr "Ingen etterspurte filer er merket som under redigering."
#: vcs/cvsservice/annotatepage.cpp:109
#, c-format
msgid "Annotate failed with exitStatus == %1"
msgstr "Merknad mislyktes, med exitStatus == %1"
#: vcs/cvsservice/annotatepage.cpp:109
msgid "Annotate Failed"
msgstr "Merknad mislyktes"
#: vcs/cvsservice/annotatepage.cpp:211
msgid "The selected revision does not exist."
msgstr "Den valgte revisjonen finnes ikke."
#: vcs/cvsservice/cvslogdialog.cpp:36
msgid "CVS Log & Diff Dialog"
msgstr "Dialog for CVS logg og diff"
#: vcs/cvsservice/cvslogdialog.cpp:42
msgid "Log From CVS"
msgstr "Logg fra CVS"
#: vcs/cvsservice/cvslogdialog.cpp:82
msgid "Diff between %1 and %2"
msgstr "Diff mellom %1 og %2"
#: vcs/cvsservice/cvsoptions.cpp:286
msgid "Error while guessing repository location."
msgstr "Feil ved gjetting av arkivsted."
#: vcs/cvsservice/annotatedialog.cpp:27
msgid "CVS Annotate Dialog"
msgstr "CVS merknadsdialog"
#: vcs/cvsservice/annotatedialog.cpp:33 vcs/cvsservice/annotatedialog.cpp:60
msgid "Annotate"
msgstr "Merknad"
#: vcs/cvsservice/cvslogpage.cpp:180
msgid "invalid link clicked"
msgstr "trykket på ugyldig lenke"
#: vcs/cvsservice/commitdlg.cpp:67
msgid ""
"You are committing your changes without any comment. This is not a good "
"practice. Continue anyway?"
msgstr ""
"Du legger inn dine endringer uten kommentar. Dette er ikke en bra måte å gjøre "
"det på. Fortsette likevel?"
#: vcs/cvsservice/commitdlg.cpp:68
msgid "CVS Commit Warning"
msgstr "CVS innsjekk-advarsel"
#: vcs/cvsservice/commitdlg.cpp:70
msgid "askWhenCommittingEmptyLogs"
msgstr "askWhenCommittingEmptyLogs"
#: vcs/cvsservice/integrator/integratordlg.cpp:62
#: vcs/cvsservice/integrator/integratordlg.cpp:82
#: vcs/cvsservice/integrator/integratordlg.cpp:84
#: vcs/cvsservice/integrator/integratordlg.cpp:129
#: vcs/cvsservice/integrator/integratordlg.cpp:131
msgid "Init CVS Repository"
msgstr "Forbered CVS-arkiv"
#: vcs/cvsservice/integrator/integratordlg.cpp:82
msgid ""
"cvs init did not exit normally. Please check if cvs is installed and works "
"correctly."
msgstr ""
"cvs init avsluttet ikke normalt. Se etter om cvs er installert og fungerer "
"riktig."
#: vcs/cvsservice/integrator/integratordlg.cpp:84
msgid ""
"cvs init exited with status %1. Please check if the cvs location is correct."
msgstr "cvs init avsluttet med status %1. Se etter om cvs-adressen er riktig."
#: vcs/cvsservice/integrator/integratordlg.cpp:129
msgid ""
"cvs import did not exit normally. Please check if cvs is installed and works "
"correctly."
msgstr ""
"cvs import avsluttet ikke normalt. Se etter om cvs er installert og fungerer "
"riktig."
#: vcs/cvsservice/integrator/integratordlg.cpp:131
msgid ""
"cvs import exited with status %1. Please check if the cvs location is correct."
msgstr ""
"cvs import avsluttet med status %1. Se etter om cvs-adressen er riktig."
#: parts/snippet/snippetdlg.ui.h:20
msgid ""
"To use variables in a snippet, you just have to enclose the variablename with "
"$-characters. When you use the snippet, you will then be asked for a value for "
"this variable. \n"
"Example snippet: This is a $VAR$\n"
"When you use this snippet you will be prompted for a value for the variable "
"$VAR$. Any occurrences of $VAR$ will then be replaced with whatever you have "
"entered.\n"
"If you need a single $-character in a snippet, which is not used to enclose a "
"variable, type $$ (two dollar characters) instead. They will automatically be "
"replaced with a single $-character when you use the snippet.\n"
"If you want to change the default delimiter to anything different, please use "
"the settings dialog to do so."
msgstr ""
#: parts/snippet/snippetdlg.ui.h:20
#, fuzzy
msgid "Snippet help"
msgstr "&Snutt:"
#: parts/classview/viewcombos.h:32
#, fuzzy
msgid "(Classes)"
msgstr "Klasser"
#: parts/classview/viewcombos.h:33
#, fuzzy
msgid "(Functions)"
msgstr "Funksjoner"
#: kdevdesigner/designer/connectiondialog.ui.h:209
#, fuzzy
msgid "Add Signal/Slot Connection"
msgstr "Rediger database-tilkopling"
#: kdevdesigner/designer/connectiondialog.ui.h:221
msgid "Remove Signal/Slot Connection"
msgstr ""
#: kdevdesigner/designer/connectiondialog.ui.h:228
#, fuzzy
msgid "Add Signal/Slot Connections"
msgstr "Rediger database-tilkoplinger"
#: kdevdesigner/designer/connectiondialog.ui.h:231
#, fuzzy
msgid "Remove Signal/Slot Connections"
msgstr "Vis && rediger forbindelser"
#: kdevdesigner/designer/connectiondialog.ui.h:237
#, fuzzy
msgid "Edit Signal/Slot Connections"
msgstr "Rediger database-tilkoplinger"
#: kdevdesigner/designer/pixmapcollectioneditor.ui.h:115
#, fuzzy
msgid "Choose Image"
msgstr "Velg &mål"
#: languages/cpp/configproblemreporter.ui.h:95
#: languages/java/configproblemreporter.ui.h:49
msgid "delay: %1 msec"
msgstr ""
#: languages/cpp/debugger/breakpoint.h:133
#: languages/ruby/debugger/breakpoint.h:89
#, fuzzy
msgid "Invalid"
msgstr "Ugyldig URL."
#: languages/cpp/debugger/breakpoint.h:309
#, fuzzy
msgid "Read Watchpoint"
msgstr "Vaktpunkt"
#: languages/cpp/app_templates/kateplugin2/plugin_app.h:52
msgid "Configure KatePlugin%{APPNAME}"
msgstr ""
#: languages/cpp/app_templates/kofficepart/kopart_aboutdata.h:12
#, fuzzy
msgid "%{APPNAME} KOffice Program"
msgstr "%{APPNAME} import"
#: languages/sql/sqlconfigwidget.ui.h:181
#, fuzzy
msgid "Connection successful"
msgstr "Tilkoblingsdetaljer"
#: languages/sql/sqlconfigwidget.ui.h:184
#, fuzzy
msgid "Unable to connect to database server"
msgstr "<ingen database-tjener>"
#: vcs/perforce/perforcepart.h:33
#, fuzzy
msgid "Perforce is a version control system"
msgstr "&Versjonskontrollsystem:"
#~ msgid "Error compiling the regular expression."
#~ msgstr "Feil ved kompilering av regulært uttrykk."
#, fuzzy
#~ msgid "Alt+C"
#~ msgstr "Alt + 1"
#, fuzzy
#~ msgid "Yes, &delayed"
#~ msgstr "Ja, forsinket"
#, fuzzy
#~ msgid "Alt+X"
#~ msgstr "Alt + 1"
#, fuzzy
#~ msgid "Add New Files To Project"
#~ msgstr "&Ny fil/prosjekt"
#, fuzzy
#~ msgid "<b>Add New Files To Project</b><p>Adds files created outside of tdevelop to the project."
#~ msgstr "<b>Legg til prosjektet</b><p>Legger til gjeldende fil i prosjektet."
#~ msgid "&Java Debug"
#~ msgstr "&Java feilsøk"
#~ msgid "Project Views"
#~ msgstr "Prosjektvisninger"
#~ msgid "Projectviews Toolbar"
#~ msgstr "Verktøylinje for prosjektvisninger"
#~ msgid "Choose Library"
#~ msgstr "Velg bibliotek"
#~ msgid "Library Settings"
#~ msgstr "Bibliotekinnstillinger"
#~ msgid "Use Qt in this project"
#~ msgstr "Bruk Qt i dette prosjektet"
#~ msgid "Version"
#~ msgstr "Versjon"
#~ msgid "Installation"
#~ msgstr "Installasjon"
#~ msgid "The path where your choosen Qt version is installed."
#~ msgstr "Stien der den valgte Qt-versjonen er installert."
#~ msgid "Qt root path:"
#~ msgstr "Qt rot-sti:"
#~ msgid "Include enums"
#~ msgstr "Ta med enums"
#~ msgid "Include global functions"
#~ msgstr "Ta med globale funksjoner"
#~ msgid "Include typedefs"
#~ msgstr "Ta med typedef"
#~ msgid "Include types"
#~ msgstr "Ta med typer"
#~ msgid "Directory where &gdb resides (e.g. /usr/bin/):"
#~ msgstr "Katalog der &gdb bor (f.eks. /usr/bin):"
#~ msgid "Arguments that are given to the application when it is debugged."
#~ msgstr "Parametre som gis til programmet når det feilsøkes."
#~ msgid "If you want gdb to be executed by a special shell or tool insert it here."
#~ msgstr "Før det opp her hvis du vil at gdb skal kjøres av et spesielt skall eller verktøy."
#~ msgid "Path to gdb"
#~ msgstr "Sti til gdb"
#~ msgid ""
#~ "If gdb is installed in a standard location, you don't have to insert anything here.\n"
#~ "If gdb is not reachable via $PATH or if you need a special gdb (e.g. for remote debugging on a different architecture) insert the path to the corresponding gdb here.\n"
#~ "Note that its name has to be gdb, so you might have to create a symlink named gdb which points to your specific gdb, e.g. arm-elf-gdb."
#~ msgstr ""
#~ "Hvis gdb er installert på et standard sted, trenger du ikke oppgi noe her.\n"
#~ "Hvis gdb ikke kan nås via $PATH eller om du trenger en spesiell gdb (f.eks. for fjernfeilsøking på en annen maskintype), så oppgi stien til tilsvarende gdb her.\n"
#~ "Merk at navnet må være gdb, så det kan hende du må lage en symbolsk lenke som heter gdb og peker på din spesielle gdb, f.eks. arm-elf-gdb."
#~ msgid "Parse:"
#~ msgstr "Tolk:"
#~ msgid "Database name:"
#~ msgstr "Database navn:"
#~ msgid "Subversion Options"
#~ msgstr "Subversion-innstillinger"
#~ msgid "Recursive commits"
#~ msgstr "Rekursiv innsjekk"
#~ msgid "Recursive updates"
#~ msgstr "Rekursiv oppdatering"
#~ msgid "Recursive diff"
#~ msgstr "Rekursiv diff"
#~ msgid "Recursive add"
#~ msgstr "Rekursiv tillegging"
#~ msgid "Recursive remove"
#~ msgstr "Rekursiv fjerning"
#~ msgid "Recursive revert"
#~ msgstr "Rekursiv tilbakestilling"
#~ msgid "Recursive resolve"
#~ msgstr "Rekursiv løsning"
#~ msgid "Recursive propset"
#~ msgstr "Rekursiv propset"
#~ msgid "Recursive propget"
#~ msgstr "Rekursiv propget"
#~ msgid "Recursive proplist"
#~ msgstr "Rekursiv proplist"
#~ msgid "Force merge (overwrite locally modified/unversioned files)"
#~ msgstr "Tvangsflett (skriv over lokalt endrede/ikke-versjonerte filer)"
#~ msgid "Import project at given url"
#~ msgstr "Importer prosjekt ved gitt URL"
#~ msgid "&Find && Replace"
#~ msgstr "&Finn og erstatt"
#~ msgid "Form1"
#~ msgstr "Skjema1"
#~ msgid "Use s&ide tab"
#~ msgstr "Bruk s&idefane"
#~ msgid "select a project view"
#~ msgstr "velg en prosjektvisning"
#~ msgid "&Linux"
#~ msgstr "&Linux"
#~ msgid "Indent &switches"
#~ msgstr "Innrykk &brytere"
#~ msgid "Indent &cases"
#~ msgstr "Innrykk &cases"
#~ msgid "Indent cl&asses"
#~ msgstr "Innrykk for kl&asser"
#~ msgid "Indent &brackets"
#~ msgstr "Innrykk for &parenteser"
#~ msgid "Indent &namespaces"
#~ msgstr "Innrykk for &avneområder"
#~ msgid "Indent &labels"
#~ msgstr "Innrykk for &etiketter"
#~ msgid "Copy To"
#~ msgstr "Kopier til"
#~ msgid "Files to copy:"
#~ msgstr "Filer som skal kopieres:"
#~ msgid "Copy Mode"
#~ msgstr "Kopi modus:"
#~ msgid "Traditional means like 'cp' - all the files go to the same target directory. \\nRelative means that the local project relative path will be appended to the target path."
#~ msgstr "Tradisjonell betyr som «cp» - alle filer kopieres til samme målmappe. \\nRelativ betyr at det lokale prosjektets relative sti blir lagt til målstien."
#~ msgid "Traditional"
#~ msgstr "Tradisjonell"
#~ msgid "Relative"
#~ msgstr "Relativ"
#~ msgid "No filter"
#~ msgstr "Intet filter"
#~ msgid "Filter for string"
#~ msgstr "Filter for streng"
#~ msgid "Filter with regular expression"
#~ msgstr "Filter med regulært uttrykk"
#~ msgid "Match case-sensitve"
#~ msgstr "Avhengig av bokstavstørrelse"
#~ msgid "&Simplified IDEAl window mode"
#~ msgstr "For&enklet IDEAI vindusmåte"
#~ msgid "This is a simplified version of the IDEA user interface. It is designed to be simple and clean. It also does not uses docked toolviews."
#~ msgstr "Dette er en forenklet versjon av brukerflaten IDEA. Den er laget for å være ren og enkel. Den bruker ikke dokkede verktøyvisninger."
#~ msgid "I&DEAl window mode"
#~ msgstr "I&DEAl-vindusmåte"
#~ msgid "This is a clone of the IDEA user interface, similar to the Tabbed pages mode."
#~ msgstr "Dette er en klon av IDEA-brukerflaten, likner på måten med faner."
#~ msgid "C&hildframe window mode"
#~ msgstr "Vindusmåte med u&nderrammer"
#~ msgid ""
#~ "All tool views are initially docked to the mainframe.\n"
#~ "Editor and browser views will live like toplevel windows within a view area of the mainframe.\n"
#~ "A typical example of this user interface mode is MS Visual Studio 6.0."
#~ msgstr ""
#~ "Alle verktøyvisningene er i utgangspunktet lagt inn i hovedramma.\n"
#~ "Skrivefeltet og hjelpetekstvinduene vil være toppnivåvinduer innenfor området til hovedramma.\n"
#~ "MS Visual Studio 6.0 er et eksempel på et slikt MDI-grensesnitt."
#~ msgid "&Tabbed pages mode"
#~ msgstr "&fane-måte"
#~ msgid ""
#~ "All tool views are initially docked to the mainframe.\n"
#~ "Editor and browser views will be stacked in a tab window.\n"
#~ "A typical example of this user interface mode is TDEStudio, our friend C++-IDE in the world of TDE."
#~ msgstr ""
#~ "Alle verktøyvisninger er i utgangspunktet lagt inn i hovedramma.\n"
#~ "Skrivefeltet og hjelpetekstvinduene blir stablet i et vindu med flere faner.\n"
#~ "TDEStudio, et annet C++-utviklingsprogram og en god venn i TDE-verdenen, er et typisk eksempel på et slikt grensesnitt."
#~ msgid "To&plevel window mode"
#~ msgstr "To&ppnivåmåte"
#~ msgid ""
#~ "All editor, browser and tool views will be toplevel windows (directly on desktop).\n"
#~ "The main widget contains the menu, toolbars and statusbar only.\n"
#~ "A typical example of this user interface mode is Borland Delphi 6.0."
#~ msgstr ""
#~ "Alle skrivefelt, hjelpetekstvinduer og verktøyvisninger vil være toppnivåvinduer (direkte på skrivebordet).\n"
#~ "Hovedvinduet inneholder bare menyen, verktøylinjene og statuslinja.\n"
#~ "Borland Delphi 6.0 er et typisk eksempel på et slikt grensesnitt."
#~ msgid "When more than one"
#~ msgstr "Når mer enn ett"
#~ msgid "annotation"
#~ msgstr "merknad"
#~ msgid "Calltree"
#~ msgstr "Kalletre"
#~ msgid "Run from the directory where the &executable is"
#~ msgstr "Kjør fra mappa der programm&et er"
#~ msgid "Run from the &BUILD directory:"
#~ msgstr "Kjør fra &BUILD-mappa:"
#~ msgid "The build directory depends on the currenty selected configuration (in Configure Options page)"
#~ msgstr "Byggemappa avhenger av det oppsettet som gjelder nå (på Innstillinger-sida)"
#~ msgid "C&ustom directory:"
#~ msgstr "&Selvvalgt mappe:"
#~ msgid "A relative to the project root directory path or an absolute path"
#~ msgstr "Relativt til rotmappa for prosjektet eller en absolutt sti"
#~ msgid "The path to the main program, defined relative to the above currently selected run directory"
#~ msgstr "Stien til hovedprogrammet, angitt relativt til den kjøremappa som ble valgt ovenfor"
#~ msgid "Start in external &terminal"
#~ msgstr "Start i ekstern &terminal"
#~ msgid "&Basics"
#~ msgstr "&Enkelt"
#~ msgid "&Application"
#~ msgstr "Progr&am"
#~ msgid "&Browse..."
#~ msgstr "&Bla gjennom ..."
#~ msgid "Browse"
#~ msgstr "Bla"
#~ msgid "Do &not inherit the configuration options of top level projects"
#~ msgstr "Ikke arv i&nnstillingsoppsett fra prosjekter på toppnivå"
#~ msgid "&Thread"
#~ msgstr "&Tråd"
#~ msgid "Pl&ugin"
#~ msgstr "Pro&gramtillegg"
#~ msgid "Create pkgconf file"
#~ msgstr "Lag pkgconf-fil"
#~ msgid "&Build as DLL"
#~ msgstr "&Bygg som DLL"
#~ msgid "Libr&aries"
#~ msgstr "Bib&lioteker"
#~ msgid "Internal Libraries"
#~ msgstr "Interne biblioteker"
#~ msgid "Bu&ild Options"
#~ msgstr "Innst&illinger for bygging"
#~ msgid "Compiler o&ptions:"
#~ msgstr "Kom&pilatorflagg:"
#~ msgid "Project Scopes"
#~ msgstr "Prosjektomfang"
#~ msgid "Haskell Compiler/Interpreter"
#~ msgstr "Haskell kompilator/tolker"
#~ msgid "&Options:"
#~ msgstr "&Valg:"
#~ msgid "Haskell &compiler/interpreter:"
#~ msgstr "Haskell &kompilator/tolker:"
#~ msgid "Co&mmand:"
#~ msgstr "Ko&mmando:"
#~ msgid "Confi&guration"
#~ msgstr "Innstilling&ger"
#~ msgid "&Flags"
#~ msgstr "&Flagg"
#~ msgid "&Libraries"
#~ msgstr "Bib&lioteker"
#~ msgid "&Linker flags (LDFLAGS):"
#~ msgstr "&Lenkerflagg (LDFLAGS):"
#~ msgid "Delete item(s)"
#~ msgstr "Slett elementer"
#~ msgid "C++ Specific"
#~ msgstr "Spesielt for C++"
#~ msgid "<b>Goto include file</b><p>Opens an include file under the cursor position."
#~ msgstr "<b>Gå til Include-fil</b><p>Åpner include-fila under skrivemerket."
#~ msgid "You have to select a file to import."
#~ msgstr "Du må velge en fil å importere."
#~ msgid "No File"
#~ msgstr "Ingen fil"
#~ msgid "This unique feature will not work if this plugin is unloaded"
#~ msgstr "Denne unike funksjonen virker ikke hvis dette programtilleggmet tas bort"
#~ msgid "%{APPNAME} Settings"
#~ msgstr "Innstillinger for %{APPNAME}"
#~ msgid "The symbols gdb resolves may be suspect"
#~ msgstr "De symbolene gdb slår opp kan være mistenkelige"
#~ msgid "Mismatched Core File"
#~ msgstr "Core-fil passer ikke"
#~ msgid "No stack"
#~ msgstr "Ingen ramme-stakk"
#~ msgid "Address"
#~ msgstr "Adresse"
#~ msgid "Toggle Watchpoint"
#~ msgstr "Slå av/på vaktpunkt"
#~ msgid "Toggle Hex/Decimal"
#~ msgstr "Bytt mellom hex/desimal"
#~ msgid "Memory/Misc Viewer"
#~ msgstr "Minne-/forskjellig visning"
#~ msgid "Amount/&End address (memory/disassemble):"
#~ msgstr "Mengde/&sluttadresse (minne/disassemble):"
#~ msgid "Memory&View:"
#~ msgstr "Minne&visning:"
#~ msgid "&Memory"
#~ msgstr "&Minne"
#~ msgid "&Disassemble"
#~ msgstr "&Disassemble"
#~ msgid "Remove item(s)"
#~ msgstr "Fjern element(er)"
#~ msgid "Remove Breakpoint"
#~ msgstr "Fjern stoppunkt"
#~ msgid "Edit Breakpoint"
#~ msgstr "Rediger stoppunkt"
#~ msgid "Disable Breakpoint"
#~ msgstr "Slå av stoppunkt"
#~ msgid "Enable Breakpoint"
#~ msgstr "Slå på stoppunkt"
#~ msgid "Display Source Code"
#~ msgstr "Vis kildekode"
#~ msgid "Clear All Breakpoints"
#~ msgstr "Fjern alle stoppunkter"
#~ msgid "\ttemporary"
#~ msgstr "\tmidlertidig"
#~ msgid "\tdisabled"
#~ msgstr "\tav"
#~ msgid "\tif %1"
#~ msgstr "\thvis %1"
#~ msgid "\thits %1"
#~ msgstr "\ttreff %1"
#~ msgid "\tignore count %1"
#~ msgstr "\tIgnorer antall %1"
#~ msgid ""
#~ "_: Breakpoint state. The 'Pending ' state is the first state displayed\n"
#~ "Pending "
#~ msgstr "Ventende "
#~ msgid ""
#~ "_: Breakpoint state. The 'add ' state is appended to the other states\n"
#~ "add "
#~ msgstr "legg til "
#~ msgid ""
#~ "_: Breakpoint state. The 'clear ' state is appended to the other states\n"
#~ "clear "
#~ msgstr "rens "
#~ msgid ""
#~ "_: Breakpoint state. The 'modify ' state is appended to the other states\n"
#~ "modify "
#~ msgstr "endre "
#~ msgid "breakpoint at %1:%2"
#~ msgstr "stoppunkt ved %1 %2"
#~ msgid "watchpoint on %1"
#~ msgstr "vaktpunkt på %1"
#~ msgid ""
#~ "Variable tree\n"
#~ "\n"
#~ "The variable tree allows you to see the variable values as you step through your program using the internal debugger. Click the right mouse button on items in this view to get a popup menu.\n"
#~ "To speed up stepping through your code leave the tree items closed and add the variable(s) to the watch section.\n"
#~ "To change a variable value in your running app use a watch variable (&eg; a=5)."
#~ msgstr ""
#~ "Variabeltre\n"
#~ "\n"
#~ "Med variabeltreet kan du se variabelverdiene ettersom programmet kjøres stegvis med den interne avluseren. Trykk høyre museknapp på elementer i denne visningen, så vises en oppsprettsmeny. \n"
#~ "Stegvis kjøring går raskere hvis tre-elementene lukkes og variablen(e) legges til i overvåkningsdelen.\n"
#~ "For å endre verdi på en variabel i det kjørende programmet kan du bruke en overvåkningsvariabel (f.eks. a=5)."
#~ msgid "debugger variable-view"
#~ msgstr "avluserens variabel-visning"
#~ msgid ""
#~ "Breakpoint list\n"
#~ "\n"
#~ "Displays a list of breakpoints with their current status. Clicking on a breakpoint item with the right mouse button displays a popup menu so you may manipulate the breakpoint. Double clicking will take you to the source in the editor window."
#~ msgstr ""
#~ "Stoppunkt-liste\n"
#~ "\n"
#~ "Viser en liste over stoppunkter med deres tilstand. Om du trykker høyre museknapp på et stopp-element vises en oppsprettsmeny som kan brukes til å redigere stoppunktet. Med et dobbeltklikk vises kildekoden i redigeringsvinduet."
#~ msgid "debugger breakpoints"
#~ msgstr "feilsøkers stoppunkter"
#~ msgid ""
#~ "Frame stack\n"
#~ "\n"
#~ "Often referred to as the \"call stack\", this is a list showing what function is currently active and who called each function to get to this point in your program. By clicking on an item you can see the values in any of the previous calling functions."
#~ msgstr ""
#~ "Funksjonskall-stakk\n"
#~ "\n"
#~ "Denne lista, som ofte kalles «anropsstakk», viser hvilken funksjon som er aktiv nå og hvor hver funksjon ble kalt for å komme til denne stedet i programmet. Trykk på et element, så kan du se verdier i hvilken som helst tidligere funksjon i kjeden."
#~ msgid "&Frame Stack"
#~ msgstr "Funksjonskall&stakk"
#~ msgid "debugger function call stack"
#~ msgstr "feilsøkers funksjonskallstakk"
#~ msgid ""
#~ "Machine code display\n"
#~ "\n"
#~ "A machine code view into your running executable with the current instruction highlighted. You can step instruction by instruction using the debuggers toolbar buttons of \"step over\" instruction and \"step into\" instruction."
#~ msgstr ""
#~ "Maskinkodevisning\n"
#~ "\n"
#~ "Et innsyn i maskinkoden for det programmet som kjøres, med gjeldende instruksjon uthevet. Du kan kjøre instruksjon for instruksjon med knappene på avluserens verktøylinje, «gå inn» og «gå over»."
#~ msgid "debugger disassemble"
#~ msgstr "avluser disassemble"
#~ msgid "Kills the executable and exits the debugger"
#~ msgstr "Stopper programmet og går ut av feilsøkeren"
#~ msgid "Interrupts the application"
#~ msgstr "Avbryt programmet"
#~ msgid "Steps over the next line"
#~ msgstr "Går over neste linje"
#~ msgid ""
#~ "Step over\n"
#~ "\n"
#~ "Executes one line of source in the current source file. If the source line is a call to a function the whole function is executed and the app will stop at the line following the function call."
#~ msgstr ""
#~ "Gå over\n"
#~ "\n"
#~ "Utfører én linje kildekode i gjeldende kildefil. Hvis linja er et kall til en funksjon, blir hele funksjonen kjørt og programmet stopper på linja etter funksjonskallet."
#~ msgid "Steps into the next statement"
#~ msgstr "Går inn i neste setning"
#~ msgid ""
#~ "Step into\n"
#~ "\n"
#~ "Executes exactly one line of source. If the source line is a call to a function then execution will stop after the function has been entered."
#~ msgstr ""
#~ "Gå inn i\n"
#~ "\n"
#~ "Kjører akkurat én linje kildekode. Hvis kildekodelinja er et funksjonskall, så stopper kjøringen etter at den har kommet inn i funksjonen."
#~ msgid "Steps into the next assembly instruction"
#~ msgstr "Gå inn i neste assembly-instruksjon"
#~ msgid ""
#~ "Step out of\n"
#~ "\n"
#~ "Executes the application until the currently executing function is completed. The debugger will then display the line after the original call to that function. If we are in the outermost frame (i.e. in main()), then this operation has no effect."
#~ msgstr ""
#~ "Gå ut av\n"
#~ "\n"
#~ "Kjør programmet til den funksjonen som utføres nå er ferdig. Avluseren vil så vise linja etter det opprinnelige kallet til funksjonen. Hvis dette er den ytterste funksjonen, dvs. main(), så har dett ingen virkning."
#~ msgid "Various views into the application"
#~ msgstr "Forskjellige visninger av programmet"
#~ msgid ""
#~ "JDB cannot use the tty* or pty* devices.\n"
#~ "Check the settings on /dev/tty* and /dev/pty*\n"
#~ "As root you may need to \"chmod ug+rw\" tty* and pty* devices and/or add the user to the tty group using \"usermod -G tty username\""
#~ msgstr ""
#~ "JDB kan ikke bruke tty*- eller pty*-enheter.\n"
#~ "Sjekk innstillingene til /dev/tty* og /dev/pty*\n"
#~ "Det kan hende at du må kjøre «chmod ug+rw» som root på\n"
#~ "tty*- og pty*-enhetene og/eller legge til brukeren til tty-\n"
#~ "gruppen ved å bruke «usermod -G tty brukernavn»"
#~ msgid "Watch:"
#~ msgstr "Overvåk:"
#~ msgid ""
#~ "_: the beginning\n"
#~ "Start:"
#~ msgstr "Starten:"
#~ msgid "Amount/End address (memory/disassemble):"
#~ msgstr "Mengde/sluttadresse (minne/disassemble):"
#~ msgid "Memory"
#~ msgstr "Minne"
#~ msgid "Filename: %1 at line: %2"
#~ msgstr "Filnavn: %1 på linje: %2"
#~ msgid "&Conditional"
#~ msgstr "&Betinget"
#~ msgid "&Ignore count"
#~ msgstr "&Ignorer antall"
#~ msgid "&Enable"
#~ msgstr "&Slå på"
#~ msgid "Glasgow Haskell Compiler"
#~ msgstr "Glasgow Haskell-kompilator"
#~ msgid "Tool &Views"
#~ msgstr "&Verktøyvisninger"
#~ msgid "MDI Mode"
#~ msgstr "MDI-modus"
#~ msgid "&Toplevel Mode"
#~ msgstr "&Toppnivå-modus"
#~ msgid "C&hildframe Mode"
#~ msgstr "Un&derramme-modus"
#~ msgid "Ta&b Page Mode"
#~ msgstr "&Fanemodus"
#~ msgid "I&DEAl Mode"
#~ msgstr "I&DEAI-modus"
#~ msgid "Switch Top Dock"
#~ msgstr "Bytt øvre dokk"
#~ msgid "Previous Tool View"
#~ msgstr "Forrige verktøyvisning"
#~ msgid "Next Tool View"
#~ msgstr "Neste verktøyvisning"
#~ msgid "Hide %1"
#~ msgstr "Skjul %1"
#~ msgid "Undock"
#~ msgstr "Løsnet"
#~ msgid "Maximize"
#~ msgstr "Maksimer"
#~ msgid "Minimize"
#~ msgstr "Minimer"
#~ msgid "Dock"
#~ msgstr "Dokk"
#~ msgid "Close &All"
#~ msgstr "Lukk &alle"
#~ msgid "&Minimize All"
#~ msgstr "&Minimer alle"
#~ msgid "&MDI Mode"
#~ msgstr "&MDI-modus"
#~ msgid "Ca&scade Windows"
#~ msgstr "O&verlapp vinduer"
#~ msgid "Cascade &Maximized"
#~ msgstr "Overlapp &maksimert"
#~ msgid "Expand &Vertically"
#~ msgstr "Utvid &loddrett"
#~ msgid "Expand &Horizontally"
#~ msgstr "Utvid &vannrett"
#~ msgid "Tile &Non-overlapped"
#~ msgstr "Side ved side &ikke-overlappet"
#~ msgid "Tile Overla&pped"
#~ msgstr "Flislegg overla&ppet"
#~ msgid "Tile V&ertically"
#~ msgstr "Flisl&egg loddrett"
#~ msgid "&Dock/Undock"
#~ msgstr "&Løsne/feste"
#~ msgid "Unnamed"
#~ msgstr "Uten navn"
#~ msgid "R&esize"
#~ msgstr "Endr&e størrelse"
#~ msgid "M&inimize"
#~ msgstr "M&inimer"
#~ msgid "M&aximize"
#~ msgstr "M&aksimer"
#~ msgid "&Maximize"
#~ msgstr "&Maksimer"
#~ msgid "&Minimize"
#~ msgstr "&Minimer"
#~ msgid "M&ove"
#~ msgstr "F&lytt"
#~ msgid "&Resize"
#~ msgstr "&Endre størrelse"
#~ msgid "&Undock"
#~ msgstr "&Ut av dokk"
#~ msgid ""
#~ "_: Freeze the window geometry\n"
#~ "Freeze"
#~ msgstr "Frys"
#~ msgid ""
#~ "_: Dock this window\n"
#~ "Dock"
#~ msgstr "Feste/løsne"
#~ msgid "Detach"
#~ msgstr "Løsne"
#~ msgid ""
#~ "_: Switch between overlap and side by side mode\n"
#~ "Overlap"
#~ msgstr "Overlapp"
#~ msgid "Switch to buffer:"
#~ msgstr "Bytt til buffer:"
#~ msgid ""
#~ "Unable to find plugins, KDevelop will not work properly!\n"
#~ "Please make sure that KDevelop is installed in your TDE directory, otherwise you have to add KDevelop's installation path to the environment variable TDEDIRS and run tdebuildsycoca. Restart KDevelop afterwards.\n"
#~ "Example for BASH users:\n"
#~ "export TDEDIRS=/path/to/tdevelop:$TDEDIRS && tdebuildsycoca"
#~ msgstr ""
#~ "Kan ikke finne tilleggsmodulene, KDevelop virker ikke ordentlig!\n"
#~ "Se etter at KDevelop er installert i TDE-mappa, ellers må du legge til stien til KDevelop i miljøvariabelen TDEDIRS og kjøre tdebuildsycoca.\n"
#~ "Start KDevelop omigjen etterpå. Eksempel for bash-brukere:\n"
#~ "export TDEDIRS=/sti/til/tdevelop:$TDEDIRS && tdebuildsycoca"
#~ msgid "Set this plugin selection as the default"
#~ msgstr "Bruk disse tilleggsmodulene som standard"
#~ msgid "&Ignore in Subversion Operations"
#~ msgstr "&Ignorer i Subversion-handlinger"
#~ msgid "Ignore in Subversion operations"
#~ msgstr "Ignorer i Subversion-handlinger"
#~ msgid "<b>Ignore in Subversion operations</b><p>Ignores file(s)."
#~ msgstr "<b>Ignorer i Subversion-handlinger</b><p>Ignorerer fil(er)."
#~ msgid "Do &Not Ignore in Subversion Operations"
#~ msgstr "&Ikke ignorer i Subversion-handlinger"
#~ msgid "Do not ignore in Subversion operations"
#~ msgstr "Ikke ignorer i Subversion-handlinger"
#~ msgid "<b>Do not ignore in Subversion operations</b><p>Do not ignore file(s)."
#~ msgstr "<b>Ikke ignorer i Subversion-handlinger</b><p>Ikke ignorer fil(er)."
#~ msgid "&Delete Tag/Branch"
#~ msgstr "&Slett merke/gren"
#~ msgid "Delete tag/branch"
#~ msgstr "Slett merke/gren"
#~ msgid "File '%1' is not readable"
#~ msgstr "Fila «%1» kan ikke leses"
#~ msgid "S&kip VCS dirs"
#~ msgstr "Ho&pp over VCS-mapper"
#~ msgid ""
#~ "Previous Doxygen process is still running.\n"
#~ "Do you want to cancel that process?"
#~ msgstr ""
#~ "Forrige Doxygen-prosess kjører ennå.\n"
#~ "Vil du avbryte den prosessen?"
#~ msgid "File creation"
#~ msgstr "Filopprettelse"
#~ msgid "Open Project View..."
#~ msgstr "Åpne prosjektvisning ..."
#~ msgid "Open project view"
#~ msgstr "Åpne prosjektvisning"
#~ msgid "Save Project View"
#~ msgstr "Lagre prosjektvisning"
#~ msgid "New Project View..."
#~ msgstr "Ny prosjektvisning ..."
#~ msgid "Delete Project View"
#~ msgstr "Slett prosjektvisning"
#~ msgid "Delete project view"
#~ msgstr "Slett prosjektvisning"
#~ msgid "Copy To..."
#~ msgstr "Kopier til ..."
#~ msgid "Cannot find the htsearch executable."
#~ msgstr "Kan ikke finne programmet htsearch."
#~ msgid "Security Widget"
#~ msgstr "Skjermelement for sikkerhet"
#~ msgid "Potential security problems"
#~ msgstr "Mulige sikkerhetsproblemer"
#~ msgid "Suggestion"
#~ msgstr "Forslag"
#~ msgid "Do Not Filter Output"
#~ msgstr "Ikke filtrer utdata"
#~ msgid "<b>Open as UTF-8</b><p>Open this file in KDevelop as UTF-8 encoded text."
#~ msgstr "<b>Åpne som UTF-8</b> <p>Åpne denne fila i KDevelop som tekst kodet i UTF-8."
#~ msgid "Some annotation about the code"
#~ msgstr "Noen notater om koden"
#~ msgid "Add Annotation"
#~ msgstr "Legg til notater"
#~ msgid "<b>Add Annotation</b><p>Add out of source comment"
#~ msgstr "<b>Legg til notater</b><p>Legg til kommentarer utenfor kildekoden"
#~ msgid "Add Annotations"
#~ msgstr "Legg til notater"
#~ msgid "<b>Do something here</b><p>Describe here what does this action do."
#~ msgstr "<b>Gjør noe her</b><p>Beskriv her hva denne handlinga gjør."
#~ msgid "Annotation Plugin"
#~ msgstr "Programtillegg for notater"
#~ msgid "annotationPart"
#~ msgstr "annotationPart"
#~ msgid "AnnotationPart for KDevelop"
#~ msgstr "AnnotationPart for KDevelop"
#~ msgid "(c) 2005"
#~ msgstr "© 2005"
#~ msgid "Annotations"
#~ msgstr "Notater"
#~ msgid "Add Annotation..."
#~ msgstr "Legg til notater ..."
#~ msgid "Could not find calltree in your $PATH. Please make sure it is installed properly."
#~ msgstr "Fant ikke calltree i søkestien $PATH. Se etter at det er riktig installert."
#~ msgid "Calltree Not Found"
#~ msgstr "Fant ikke calltree"
#, fuzzy
#~ msgid "Select Main Program Executable"
#~ msgstr "Velg kjørbar for hovedprogrammet"
#~ msgid ""
#~ "# File generated by tdevelop's qmake manager. \n"
#~ "# ------------------------------------------- \n"
#~ "# Subdir relative project main directory: %s\n"
#~ "# Target is %s %s\n"
#~ msgstr ""
#~ "# Fil laget av tdevelops qmake-styring. \n"
#~ "# ------------------------------------------- \n"
#~ "# Undermappe rel. prosjektets hovedmappe: %s\n"
#~ "# Målet er %s %s\n"
#~ msgid "Open browser"
#~ msgstr "Åpne viser"
#~ msgid "Opens a file browser for selection of files or directories"
#~ msgstr "Åpner en filviser for å velge filer eller mapper"
#~ msgid "Up"
#~ msgstr "Opp"
#~ msgid "Down"
#~ msgstr "Ned"
#~ msgid "Edit value"
#~ msgstr "Rediger verdi"
#~ msgid "Remove value"
#~ msgstr "Fjern verdi"
#~ msgid "Add Library"
#~ msgstr "Legg til bibliotek"
#~ msgid "Add library to link:"
#~ msgstr "Legg til bibliotek som skal lenkes:"
#~ msgid "Change library to link:"
#~ msgstr "Endre bibliotek som skal lenkes:"
#~ msgid "Configure file"
#~ msgstr "Filinnstillinger"
#~ msgid "<b>Configure file</b><p>Opens <b>File Properties</b> dialog that allows a file to be excluded from specified scopes."
#~ msgstr "<b>Filinnstillinger</b> <p>Åpner dialogen <b>Filegenskaper</b> der en fil kan utelates fra oppgitte virkefelt."
#~ msgid "Please enter a name for the new scope:"
#~ msgstr "Oppgi navn for det nye virkefeltet:"
#~ msgid "Add Subdirectory"
#~ msgstr "Legg til undermappe"
#~ msgid "Properties..."
#~ msgstr "Egenskaper ..."
#~ msgid "Add Folder"
#~ msgstr "Legg til mappe"