You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tde-i18n/tde-i18n-zh_CN/messages/tdeadmin/knetworkconf.po

964 lines
28 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# Simplified Chinese translation for knetworkconf messages.
# Copyright (C) 2006, Zhang Le
# This file is distributed under the same license as the tdebase package.
# Zhang Le <robert@thizgroup.com>, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: knetworkconf\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2022-09-22 18:23+0000\n"
"PO-Revision-Date: 2006-05-04 19:05+0800\n"
"Last-Translator: Zhang Le <robert@thizgroup.com>\n"
"Language-Team: zh_CN <i18n-translation@lists.linux.net.cn>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Zhang Le"
#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "robert@thizgroup.com"
#: knetworkconf/kadddevicecontainer.cpp:53
msgid "&Advanced Settings"
msgstr "高级设置(&A)"
#: knetworkconf/kadddevicecontainer.cpp:54
#: knetworkconf/kadddevicecontainer.cpp:55
msgid "Toggle between advanced and basic settings"
msgstr "切换高级和基此设置"
#: knetworkconf/kadddevicecontainer.cpp:57
msgid "Apply changes"
msgstr "应用更改"
#: knetworkconf/kadddevicecontainer.cpp:59
msgid "Forget changes"
msgstr "放弃更改"
#: knetworkconf/kadddevicecontainer.cpp:129
#: knetworkconf/kadddnsserverdlg.ui.h:42 knetworkconf/kaddknownhostdlg.ui.h:25
msgid "The format of the specified IP address is not valid."
msgstr "指定 IP 地址的格式无效。"
#: knetworkconf/kadddevicecontainer.cpp:129
#: knetworkconf/kadddevicecontainer.cpp:132
#: knetworkconf/kadddevicecontainer.cpp:135
#: knetworkconf/kadddevicecontainer.cpp:138
#: knetworkconf/kadddnsserverdlg.ui.h:42 knetworkconf/kaddknownhostdlg.ui.h:25
#: knetworkconf/knetworkconf.cpp:591
msgid "Invalid IP Address"
msgstr "无效的 IP 地址"
#: knetworkconf/kadddevicecontainer.cpp:132
msgid "The format of the specified netmask is not valid."
msgstr "指定的网络掩码的格式无效。"
#: knetworkconf/kadddevicecontainer.cpp:135
msgid "The format of the specified broadcast is not valid."
msgstr "指定的广播地址的格式无效。"
#: knetworkconf/kadddevicecontainer.cpp:138
msgid "The format of the specified Gateway is not valid."
msgstr "指定的网关的格式无效。"
#: knetworkconf/kadddevicecontainer.cpp:174
msgid "Basic Settings"
msgstr "基此设置"
#: knetworkconf/kadddevicecontainer.cpp:179
msgid "Advanced Settings"
msgstr "高级设置"
#: knetworkconf/kadddnsserverdlg.ui.h:54
msgid "You have to type an alias first."
msgstr "您必须先输入一个别名。"
#: knetworkconf/kadddnsserverdlg.ui.h:54
msgid "Invalid Text"
msgstr "无效文字"
#: knetworkconf/kaddknownhostdlg.ui.h:29
msgid "You must add at least one alias for the specified IP address."
msgstr "您必须为指定的 IP 地址至少添加一个别名。"
#: knetworkconf/kaddknownhostdlg.ui.h:29
msgid "Insufficient Aliases"
msgstr "别名不足"
#: knetworkconf/kaddknownhostdlg.ui.h:63
msgid "Edit Alias"
msgstr "编辑别名"
#: knetworkconf/kaddknownhostdlg.ui.h:64 knetworkconf/kaddknownhostdlg.ui.h:92
msgid "Alias:"
msgstr "别名:"
#: knetworkconf/kaddknownhostdlg.ui.h:91
msgid "Add New Alias"
msgstr "添加新别名"
#: knetworkconf/knetworkconf.cpp:67
msgid "Could not load network configuration information."
msgstr "无法装入网络配置信息。"
#: knetworkconf/knetworkconf.cpp:68
msgid "Error Reading Configuration File"
msgstr "读取配置文件时出错"
#: knetworkconf/knetworkconf.cpp:119 knetworkconf/knetworkconf.cpp:757
msgid "Enabled"
msgstr "已启用"
#: knetworkconf/knetworkconf.cpp:129 knetworkconf/knetworkconf.cpp:771
msgid "Disabled"
msgstr "已禁用"
#: knetworkconf/knetworkconf.cpp:138 knetworkconf/knetworkconf.cpp:305
msgid "Manual"
msgstr "手动"
#: knetworkconf/knetworkconf.cpp:159
msgid ""
"The new configuration has not been saved.\n"
"Do you want to apply changes before quitting?"
msgstr ""
"新配置尚未保存。\n"
"您想在退出前应用更改吗?"
#: knetworkconf/knetworkconf.cpp:160 knetworkconf/knetworkconf.cpp:832
#: knetworkconf/knetworkconf.cpp:851
msgid "New Configuration Not Saved"
msgstr "新配置尚未保存"
#: knetworkconf/knetworkconf.cpp:207
msgid "Edit Server"
msgstr "编辑服务器"
#: knetworkconf/knetworkconf.cpp:234
#, c-format
msgid "Configure Device %1"
msgstr "配置设备 %1"
#: knetworkconf/knetworkconf.cpp:443
msgid "Could not open file '/etc/resolv.conf' for reading."
msgstr "无法打开文件“/etc/resolv.conf”进行读取。"
#: knetworkconf/knetworkconf.cpp:444
msgid "Error Loading Config Files"
msgstr "装入配置文件时出错"
#: knetworkconf/knetworkconf.cpp:591
msgid "The default Gateway IP address is invalid."
msgstr "默认网关的 IP 地址无效。"
#: knetworkconf/knetworkconf.cpp:682
msgid "Enabling interface <b>%1</b>"
msgstr "启用接口 <b>%1</b>"
#: knetworkconf/knetworkconf.cpp:684
msgid "Disabling interface <b>%1</b>"
msgstr "禁用接口 <b>%1</b>"
#: knetworkconf/knetworkconf.cpp:718
msgid ""
"Could not launch backend to change network device state. You will have to do "
"it manually."
msgstr "无法启动后端来更改网络设备状态。您需要手动完成。"
#: knetworkconf/knetworkconf.cpp:739
msgid ""
"There was an error changing the device's state. You will have to do it "
"manually."
msgstr "更改设备状态时出错。您需要手动完成。"
#: knetworkconf/knetworkconf.cpp:740
msgid "Could Not Change Device State"
msgstr "无法更改设备状态"
#: knetworkconf/knetworkconf.cpp:831 knetworkconf/knetworkconf.cpp:850
msgid ""
"The new configuration has not been saved.\n"
"Apply changes?"
msgstr ""
"新配置尚未保存。\n"
"应用更改吗?"
#: knetworkconf/kaddknownhostdlg.ui:16 knetworkconf/knetworkconf.cpp:868
#, no-c-format
msgid "Add New Static Host"
msgstr "添加新静态主机"
#: knetworkconf/knetworkconf.cpp:901
msgid "Edit Static Host"
msgstr "编辑静态主机"
#: knetworkconf/knetworkconf.cpp:1039
msgid "Could not load the selected Network Profile."
msgstr "无法装入选中的网络配置文件。"
#: knetworkconf/knetworkconf.cpp:1040
msgid "Error Reading Profile"
msgstr "读取配置文件时出错"
#: knetworkconf/knetworkconf.cpp:1063
msgid "Create New Network Profile"
msgstr "创建新网络配置文件"
#: knetworkconf/knetworkconf.cpp:1064
msgid "Name of new profile:"
msgstr "新配置文件名称:"
#: knetworkconf/knetworkconf.cpp:1093
msgid "There is already another profile with that name."
msgstr "已经存在同名的配置文件。"
#: knetworkconf/knetworkconfigparser.cpp:41
#, fuzzy
msgid ""
"Could not find the backend script for the network configuration detection. "
"Something is wrong with your installation.\n"
" Please check that \n"
"{TDE_PATH}/%1 \n"
"file is present."
msgstr ""
"无法找到后端脚本此来进行网络配置检测。您的安装可能存在问题。\n"
"请检查 \n"
"{TDE_PATH}/%1 \n"
"文件是否存在。"
#: knetworkconf/knetworkconfigparser.cpp:42
msgid "Could Not Find Network Configuration Backend Script"
msgstr "找不到网络配置后端脚本"
#: knetworkconf/knetworkconfigparser.cpp:65
#: knetworkconf/knetworkconfigparser.cpp:95
#: knetworkconf/knetworkconfigparser.cpp:320
#: knetworkconf/knetworkconfigparser.cpp:1016
msgid ""
"Could not execute backend script for the network configuration detection. "
"Something is wrong with your installation."
msgstr "无法执行后端脚本进行网络配置检测。您的安装可能存在问题。"
#: knetworkconf/knetworkconfigparser.cpp:66
#: knetworkconf/knetworkconfigparser.cpp:96
#: knetworkconf/knetworkconfigparser.cpp:321
#: knetworkconf/knetworkconfigparser.cpp:1017
msgid "Could Not Launch Network Configuration Backend Script"
msgstr "无法执行网络配置后端脚本"
#: knetworkconf/knetworkconfigparser.cpp:113
#: knetworkconf/knetworkconfigparser.cpp:837
msgid "Could not parse the XML output from the network configuration backend."
msgstr "无法分析网络配置后端的 XML 输出。"
#: knetworkconf/knetworkconfigparser.cpp:114
msgid "Error While Listing Network Interfaces"
msgstr "列出网络接口时出错"
#: knetworkconf/knetworkconfigparser.cpp:191
msgid "Could not open file /proc/net/route."
msgstr "无法打开文件 /proc/net/route。"
#: knetworkconf/knetworkconfigparser.cpp:192
msgid "Could Not Open File"
msgstr "无法打开文件"
#: knetworkconf/knetworkconfigparser.cpp:303
#: knetworkconf/kreloadnetworkdlg.ui:28
#, no-c-format
msgid "Reloading Network"
msgstr "重新装入网络"
#: knetworkconf/knetworkconfigparser.cpp:304
msgid "%1Please wait while saving the network settings...%2"
msgstr "%1请稍候正在保存网络设置...%2"
#: knetworkconf/knetworkconfigparser.cpp:762
msgid "Ethernet Network Device"
msgstr "以太网设备"
#: knetworkconf/knetworkconfigparser.cpp:764
msgid "Wireless Network Device"
msgstr "无线网络设备"
#: knetworkconf/knetworkconfigparser.cpp:838
msgid "Error Loading The Network Configuration"
msgstr "装入网络配置时出错"
#: knetworkconf/knetworkconfigparser.cpp:1030
msgid ""
"Could not parse the list of supported platforms from the network "
"configuration backend."
msgstr "无法分析网络配置后端的支持平台列表。"
#: knetworkconf/knetworkconfigparser.cpp:1031
msgid "Error Obtaining Supported Platforms List"
msgstr "获取支持平台列表时出错"
#: knetworkconf/knetworkconfmodule.cpp:94
msgid "KNetworkConf"
msgstr "KNetworkConf"
#: knetworkconf/knetworkconfmodule.cpp:97
msgid "Lead Developer"
msgstr "首席开发者"
#: knetworkconf/knetworkconfmodule.cpp:99
msgid "Provided the Network backend which KNetworkConf relies on."
msgstr "提供了 KNetworkConf 所依赖的网络后端。"
#: knetworkconf/knetworkconfmodule.cpp:101
msgid "Conectiva Linux Support"
msgstr "Conectiva Linux 支持"
#: knetworkconf/knetworkconfmodule.cpp:103
msgid "Documentation maintainer, and German translator"
msgstr "文档维护者和德语翻译"
#: knetworkconf/knetworkconfmodule.cpp:105
msgid "Various bugfixes and features"
msgstr "各种错误修正和特性"
#: knetworkconf/knetworkconfmodule.cpp:107
msgid "Various bugfixes and Brazilian Portuguese translator"
msgstr "各种错误修正和巴西葡萄牙语翻译"
#: knetworkconf/knetworkconfmodule.cpp:113
msgid ""
"%1Network configuration%2This module allows you to configure your TCP/IP "
"settings.%3"
msgstr "%1网络配置%2此模块允许您配置您的 TCP/IP 设置。%3"
#: knetworkconf/kprofileslistviewtooltip.h:84
msgid "<b>Network Configuration of this Profile:</b>"
msgstr "<b>此配置文件的网络配置:</b>"
#: knetworkconf/kprofileslistviewtooltip.h:94
#, c-format
msgid "<p><b>Interface:</b> %1"
msgstr "<p><b>接口:</b> %1"
#: knetworkconf/kprofileslistviewtooltip.h:95
#, c-format
msgid "<br><b>Type:</b> %1"
msgstr "<br><b>类型:</b> %1"
#: knetworkconf/kprofileslistviewtooltip.h:101
#, c-format
msgid "<br><b>Boot Protocol:</b> %1"
msgstr "<br><b>启动协议:</b> %1"
#: knetworkconf/kprofileslistviewtooltip.h:104
#, c-format
msgid "<br><b>IP Address:</b> %1"
msgstr "<br><b>IP 地址:</b> %1"
#: knetworkconf/kprofileslistviewtooltip.h:105
#, c-format
msgid "<br><b>Broadcast Address:</b> %1"
msgstr "<br><b>广播地址:</b> %1"
#: knetworkconf/kprofileslistviewtooltip.h:107
#, c-format
msgid "<br><b>On Boot:</b> %1"
msgstr "<br><b>启动时:</b> %1"
#: knetworkconf/kprofileslistviewtooltip.h:111
#, c-format
msgid "</p><p><b>Default Gateway:</b> %1"
msgstr "</p><p><b>默认网关:</b> %1"
#: knetworkconf/kprofileslistviewtooltip.h:113
#, c-format
msgid "<br><b>Domain Name:</b> %1"
msgstr "<br><b>域名:</b> %1"
#: knetworkconf/kprofileslistviewtooltip.h:114
#, c-format
msgid "<br><b>Machine Name:</b> %1"
msgstr "<br><b>机器名:</b> %1"
#: knetworkconf/kprofileslistviewtooltip.h:118
#, c-format
msgid "<br><b>DNS Name Server:</b> %1"
msgstr "<br><b>DNS 服务器:</b> %1"
#: knetworkconf/version.h:5
msgid ""
"KNetworkConf - A Trinity Control Center module to configure TCP/IP settings."
msgstr "KNetworkConf - 允许您配置 TCP/IP 设置的 TDE 控制中心模块。"
#: knetworkconf/kadddevicedlg.ui:44
#, no-c-format
msgid "Configure Interface"
msgstr "配置接口"
#: knetworkconf/kadddevicedlg.ui:64
#, no-c-format
msgid "TCP/IP Address"
msgstr "TCP/IP 地址"
#: knetworkconf/kadddevicedlg.ui:93
#, no-c-format
msgid "dhcp"
msgstr "dhcp"
#: knetworkconf/kadddevicedlg.ui:98
#, no-c-format
msgid "bootp"
msgstr "bootp"
#: knetworkconf/kadddevicedlg.ui:105 knetworkconf/kadddevicedlg.ui:108
#, no-c-format
msgid "The boot protocol this network device should use"
msgstr "此网络设备应使用的启动协议"
#: knetworkconf/kadddevicedlg.ui:133
#, no-c-format
msgid "Manual:"
msgstr "手动:"
#: knetworkconf/kadddevicedlg.ui:136
#, no-c-format
msgid "Use a static IP address. Use the fields below to enter the values"
msgstr "使用静态 IP 地址。使用下面的输入框输入值"
#: knetworkconf/kadddevicedlg.ui:139
#, no-c-format
msgid ""
"<p>Sets this interface to use static IP settings.</p>\n"
"<p>In this case, please use the fields below to enter the desired values "
"manually.</p>"
msgstr ""
"<p>将此设备设定为使用静态 IP 设置。</p>\n"
"<p>在这种情况下,请使用下面的输入框来手动输入您想要的值。</p>"
#: knetworkconf/kadddevicedlg.ui:148
#, no-c-format
msgid "Automatic:"
msgstr "自动:"
#: knetworkconf/kadddevicedlg.ui:151
#, no-c-format
msgid "Use a dynamic IP address"
msgstr "使用动态 IP 地址"
#: knetworkconf/kadddevicedlg.ui:154
#, no-c-format
msgid ""
"<p>Using an dynamic IP address causes this device to get a free IP address "
"automatically.</p>\n"
"<p>The interface will try to contact an DHCP- or BOOTP-Server during the "
"boot process.</p>\n"
"<p>Rendevouz is not supported yet.</p>"
msgstr ""
"<p>使用动态 IP 地址将使得此设备自动获得一个空闲的 IP 地址。</p>\n"
"<p>接口在启动过程中会尝试连接一个 DHCP 或者 BOOTP 服务器。</p>\n"
"<p>暂不支持 Rendevouz。</p>"
#: knetworkconf/kadddevicedlg.ui:184
#, no-c-format
msgid "Activate when the computer starts"
msgstr "当计算机启动时激活"
#: knetworkconf/kadddevicedlg.ui:187
#, no-c-format
msgid "Ensures that this interface gets activated during boot time"
msgstr "保证此接口在启动时被激活"
#: knetworkconf/kadddevicedlg.ui:190
#, no-c-format
msgid ""
"<p>Ensures that this interface gets activated during boot time.</p>\n"
"<p>Otherwise, you will have to active the interface manually after you have "
"logged in after the boot process.</p>"
msgstr ""
"<p>保证此接口在启动时被激活。</p>\n"
"<p>否则,您需要在启动过程后登录再手工激活此接口。</p>"
#: knetworkconf/kadddevicedlg.ui:197
#, no-c-format
msgid "255.255.255.0"
msgstr "255.255.255.0"
#: knetworkconf/kadddevicedlg.ui:202
#, no-c-format
msgid "255.255.0.0"
msgstr "255.255.0.0"
#: knetworkconf/kadddevicedlg.ui:207
#, no-c-format
msgid "255.0.0.0"
msgstr "255.0.0.0"
#: knetworkconf/kadddevicedlg.ui:212
#, no-c-format
msgid "255.255.255.128"
msgstr "255.255.255.128"
#: knetworkconf/kadddevicedlg.ui:217
#, no-c-format
msgid "255.255.255.192"
msgstr "255.255.255.192"
#: knetworkconf/kadddevicedlg.ui:222
#, no-c-format
msgid "255.255.255.240"
msgstr "255.255.255.240"
#: knetworkconf/kadddevicedlg.ui:227
#, no-c-format
msgid "255.255.255.248"
msgstr "255.255.255.248"
#: knetworkconf/kadddevicedlg.ui:237
#, no-c-format
msgid "Subnetmask of the network device"
msgstr "此网络设备的子网掩码"
#: knetworkconf/kadddevicedlg.ui:240
#, no-c-format
msgid ""
"<p>Please enter the desired subnetmask for the interface here.</p>\n"
"<p>For small private networks, 255.255.255.0 will most often be a reasonable "
"default value.</p>\n"
"<p>This field will change from a popup box to a combo box as soon as you "
"enable the advanced settings below.</p>"
msgstr ""
"<p>请在此输入接口所需要的子网掩码。</p>\n"
"<p>对于小的私有网络,绝大多数情况下取 255.255.255.0 作为默认值即可。</p>\n"
"<p>如果您启用了下面的高级设置,此字段将会从一个下拉框变成一个组合框。</p> "
#: knetworkconf/kadddevicedlg.ui:284
#, no-c-format
msgid "Netmask:"
msgstr "网络掩码:"
#: knetworkconf/kadddevicedlg.ui:287 knetworkconf/kadddevicedlg.ui:290
#, no-c-format
msgid ""
"The netmask defines a range of IP numbers which will build a subnet inside "
"the network."
msgstr "网络掩码定义了一段 IP 地址,这些 IP 地址将构成网络里的一个子网。"
#: knetworkconf/kadddevicedlg.ui:301
#, no-c-format
msgid "IP address for the network device"
msgstr "网络设备的 IP 地址"
#: knetworkconf/kadddevicedlg.ui:304
#, no-c-format
msgid ""
"<p>Here you should enter the IP address for the network interface.</p>\n"
"<p>Please note: If your network is connected to the internet, you should "
"only enter IP addresses you have been given by your provider.</p>\n"
"<p>Otherwise, you should enter one of the IP addresses which are explicitly "
"reserved for private use.</p>\n"
"<p>Most small private networks use class C networks, which allow up to 255 "
"computers in your network. So simply use addresses like 192.168.1.1, "
"192.168.1.2, 192.168.1.171 and so on for your computers.</p>\n"
"<p>Cass C networks: 192.168.0.0 to 192.168.255.25, for example 192.168.0.13."
"</p>\n"
"<p>Class B networks: 172.16.0.0 to 172.31.255.255, for example 172.28.2.5</"
"p>\n"
"<p>Class A networks: 10.0.0.0 to 10.255.255.255, for example 10.5.12.14</p>\n"
"<p>Please ensure that all IP addresses you give to your computers are "
"unique; you will have many problems if the same address is assigned to more "
"than one network device.</p>"
msgstr ""
"<p>您应在此输入网卡接口的 IP 地址。</p>\n"
"<p>请注意:如果您的网络是连到 Internet 的,您应该只输入网络供应商所提供的 IP "
"地址。</p>\n"
"<p>否则,您应该在此输入一个私有网络 IP 地址。</p>\n"
"<p>大多数私有网络使用 C 类网络,可以容纳多至 255 台主机。所以您的计算机使用"
"像 192.168.1.1、192.168.1.2、192.168.1.171 这样的地址就行了。</p>\n"
"<p>C 类网络192.168.0.0 到 192.168.255.255,比如 192.168.0.13</p>\n"
"<p>B 类网络172.16.0.0 到 172.31.255.255,比如 172.28.2.5</p>\n"
"<p>A 类网络10.0.0.0 到 10.255.255.255,比如 10.5.12.14</p>\n"
"<p>请确保您为您的计算机设定的IP地址都是唯一的如果将同一个地址指派给了多个网"
"络设备的话,您会有很多麻烦。</p>"
#: knetworkconf/kadddevicedlg.ui:336 knetworkconf/kadddnsserverdlg.ui:84
#: knetworkconf/kaddknownhostdlg.ui:38 knetworkconf/knetworkconfdlg.ui:296
#, no-c-format
msgid "IP address:"
msgstr "IP 地址:"
#: knetworkconf/kadddevicedlg.ui:339 knetworkconf/kadddevicedlg.ui:342
#: knetworkconf/kadddevicedlgextension.ui:86
#: knetworkconf/kadddevicedlgextension.ui:89
#, no-c-format
msgid ""
"An IP address is an unique identifier of a networking device in an TCP/IP "
"network"
msgstr "IP 地址是 TCP/IP 网络中网络设备的唯一标识符"
#: knetworkconf/kadddevicedlgextension.ui:16
#, no-c-format
msgid "Advanced Options"
msgstr "高级选项"
#: knetworkconf/kadddevicedlgextension.ui:27
#, no-c-format
msgid "Advanced Device Information"
msgstr "高级设备信息"
#: knetworkconf/kadddevicedlgextension.ui:30
#, no-c-format
msgid "Set advanced setting for the network device"
msgstr "设置网络设备的高级设置"
#: knetworkconf/kadddevicedlgextension.ui:41
#, no-c-format
msgid "Description:"
msgstr "描述:"
#: knetworkconf/kadddevicedlgextension.ui:44
#: knetworkconf/kadddevicedlgextension.ui:69
#, no-c-format
msgid "IP address of the network device"
msgstr "网络设备的 IP 地址"
#: knetworkconf/kadddevicedlgextension.ui:55
#: knetworkconf/kadddevicedlgextension.ui:58
#, no-c-format
msgid "Simply enter a short human-readable description for this device"
msgstr "为此设备输入一段简短的描述"
#: knetworkconf/kadddevicedlgextension.ui:72
#, no-c-format
msgid ""
"The Broadcast is a special address. All devices of a network respond if "
"packages are sent to this address."
msgstr ""
"广播地址是一个特殊的地址。如果有数据包发到此地址,网络中的全部设备都会响应。"
#: knetworkconf/kadddevicedlgextension.ui:80
#, no-c-format
msgid "Gateway:"
msgstr "网关:"
#: knetworkconf/kadddevicedlgextension.ui:100
#, no-c-format
msgid "Default gateway for the network device"
msgstr "网络设备的默认网关"
#: knetworkconf/kadddevicedlgextension.ui:103
#, no-c-format
msgid ""
"<p>Here you should enter the default gateway for the network device.</p>"
msgstr "<p>在此输入网络设备的默认网关。</p>"
#: knetworkconf/kadddevicedlgextension.ui:111
#, no-c-format
msgid "Broadcast:"
msgstr "广播:"
#: knetworkconf/kadddevicewifiext.ui:18 knetworkconf/kadddevicewifiext.ui:32
#, no-c-format
msgid "Wireless Settings"
msgstr "无线设置"
#: knetworkconf/kadddevicewifiext.ui:43
#, no-c-format
msgid "WEP key:"
msgstr "WEP 密钥:"
#: knetworkconf/kadddevicewifiext.ui:61
#, no-c-format
msgid "ESSID:"
msgstr "ESSID"
#: knetworkconf/kadddevicewifiext.ui:69
#, no-c-format
msgid "Key type:"
msgstr "密钥类型:"
#: knetworkconf/kadddevicewifiext.ui:75
#, no-c-format
msgid "ASCII"
msgstr "ASCII"
#: knetworkconf/kadddevicewifiext.ui:80
#, no-c-format
msgid "Hexadecimal"
msgstr "十六进制"
#: knetworkconf/kadddnsserverdlg.ui:28
#, no-c-format
msgid "Add New DNS Server"
msgstr "添加新 DNS 服务器"
#: knetworkconf/kadddnsserverdlg.ui:59
#, no-c-format
msgid "IP address of the new DNS server"
msgstr "新 DNS 服务器的 IP 地址"
#: knetworkconf/kadddnsserverdlg.ui:92
#, no-c-format
msgid "&Add"
msgstr "添加(&A)"
#: knetworkconf/kadddnsserverdlg.ui:95
#, no-c-format
msgid "Add the server to the list"
msgstr "将服务器添加到列表"
#: knetworkconf/kadddnsserverdlg.ui:106
#, no-c-format
msgid "Forget it"
msgstr "放弃"
#: knetworkconf/kaddknownhostdlg.ui:154 knetworkconf/knetworkconfdlg.ui:657
#, no-c-format
msgid "Aliases"
msgstr "别名"
#: knetworkconf/kaddknownhostdlg.ui:184 knetworkconf/knetworkconfdlg.ui:571
#: knetworkconf/knetworkconfdlg.ui:689
#, no-c-format
msgid "&Add..."
msgstr "添加(&A)..."
#: knetworkconf/kaddknownhostdlg.ui:201 knetworkconf/knetworkconfdlg.ui:588
#: knetworkconf/knetworkconfdlg.ui:706
#, no-c-format
msgid "&Edit..."
msgstr "编辑(&E)..."
#: knetworkconf/kdetectdistrodlg.ui:16
#, no-c-format
msgid "Detecting Your Current Platform"
msgstr "检测您目前的平台"
#: knetworkconf/kdetectdistrodlg.ui:60
#, no-c-format
msgid "Please wait while detecting your current platform..."
msgstr "请稍候,正在检测您目前的平台..."
#: knetworkconf/kinterfaceupdowndlg.ui:16
#, no-c-format
msgid "Changing Interface State"
msgstr "更改接口状态"
#: knetworkconf/kinterfaceupdowndlg.ui:64
#, no-c-format
msgid "Bringing up interface <b>eth0</b>..."
msgstr "正在启用接口 <b>eth0</b>..."
#: knetworkconf/knetworkconfdlg.ui:36
#, no-c-format
msgid "Network Settings"
msgstr "网络设置"
#: knetworkconf/knetworkconfdlg.ui:42
#, no-c-format
msgid "Configure your TCP/IP settings"
msgstr "配置您的 TCP/IP 设置"
#: knetworkconf/knetworkconfdlg.ui:45
#, no-c-format
msgid "Change TCP/IP settings"
msgstr "更改 TCP/IP 设置"
#: knetworkconf/knetworkconfdlg.ui:66
#, no-c-format
msgid "Network Interfaces"
msgstr "网络接口"
#: knetworkconf/knetworkconfdlg.ui:85
#, no-c-format
msgid "Available Network Interfaces"
msgstr "可用的网络接口"
#: knetworkconf/knetworkconfdlg.ui:110
#, no-c-format
msgid "Interface"
msgstr "接口"
#: knetworkconf/knetworkconfdlg.ui:121 knetworkconf/knetworkconfdlg.ui:646
#, no-c-format
msgid "IP Address"
msgstr "IP 地址"
#: knetworkconf/knetworkconfdlg.ui:132
#, no-c-format
msgid "Protocol"
msgstr "协议"
#: knetworkconf/knetworkconfdlg.ui:143
#, no-c-format
msgid "State"
msgstr "状态"
#: knetworkconf/knetworkconfdlg.ui:154
#, no-c-format
msgid "Comment"
msgstr "注释"
#: knetworkconf/knetworkconfdlg.ui:175
#, no-c-format
msgid "List of configured network devices"
msgstr "已配置的网络设备列表"
#: knetworkconf/knetworkconfdlg.ui:194
#, no-c-format
msgid "Configure Interface..."
msgstr "配置接口..."
#: knetworkconf/knetworkconfdlg.ui:197
#, no-c-format
msgid "Change the settings of the selected device"
msgstr "更改选中设备的设置"
#: knetworkconf/knetworkconfdlg.ui:208
#, no-c-format
msgid "Enable Interface"
msgstr "启用接口"
#: knetworkconf/knetworkconfdlg.ui:219
#, no-c-format
msgid "Disable Interface"
msgstr "禁用接口"
#: knetworkconf/knetworkconfdlg.ui:248
#, no-c-format
msgid "Routes"
msgstr "路由"
#: knetworkconf/knetworkconfdlg.ui:265
#, no-c-format
msgid "Default Gateway"
msgstr "默认网关"
#: knetworkconf/knetworkconfdlg.ui:348
#, no-c-format
msgid "Default Gateway IP address"
msgstr "默认网关 IP 地址"
#: knetworkconf/knetworkconfdlg.ui:373
#, no-c-format
msgid "Device:"
msgstr "设备:"
#: knetworkconf/knetworkconfdlg.ui:401
#, no-c-format
msgid "Network device where to send packets"
msgstr "数据包发送目的网络设备"
#: knetworkconf/knetworkconfdlg.ui:432
#, no-c-format
msgid "Domain Name System"
msgstr "域名系统"
#: knetworkconf/knetworkconfdlg.ui:443
#, no-c-format
msgid "Domain Name Servers"
msgstr "域名服务器"
#: knetworkconf/knetworkconfdlg.ui:499
#, no-c-format
msgid "Move up the selected server on the list (higher priority)"
msgstr "将列表中选中的服务器上移(高优先级)"
#: knetworkconf/knetworkconfdlg.ui:513
#, no-c-format
msgid "Move down the selected server on the list (less priority)"
msgstr "将列表中选中的服务器下移(低优先级)"
#: knetworkconf/knetworkconfdlg.ui:637
#, no-c-format
msgid "Static Hosts"
msgstr "静态主机"
#: knetworkconf/knetworkconfdlg.ui:738
#, no-c-format
msgid "Host name:"
msgstr "主机名:"
#: knetworkconf/knetworkconfdlg.ui:762
#, no-c-format
msgid "Domain name:"
msgstr "域名:"
#: knetworkconf/knetworkconfdlg.ui:772
#, no-c-format
msgid "Network Profiles"
msgstr "网络配置文件"
#: knetworkconf/knetworkconfdlg.ui:783
#, no-c-format
msgid "Available Network Profiles"
msgstr "可用的网络配置文件"
#: knetworkconf/knetworkconfdlg.ui:792
#, no-c-format
msgid "Name"
msgstr "名称"
#: knetworkconf/knetworkconfdlg.ui:821
#, no-c-format
msgid "&Load Selected"
msgstr "装入选中(&L)"
#: knetworkconf/knetworkconfdlg.ui:829
#, no-c-format
msgid "&Save Selected"
msgstr "保存选中(&S)"
#: knetworkconf/knetworkconfdlg.ui:837
#, no-c-format
msgid "&Create New..."
msgstr "创建(&C)..."
#: knetworkconf/knetworkconfdlg.ui:845
#, no-c-format
msgid "&Delete Selected"
msgstr "删除选中(&D)"
#: knetworkconf/kreloadnetworkdlg.ui:111
#, no-c-format
msgid ""
"Please wait while the network is reloaded so\n"
"the changes can take effect."
msgstr "请稍候,正在重新装入网络,以便让更改生效。"
#: knetworkconf/tdeselectdistrodlg.ui:16
#, no-c-format
msgid "Unsupported Platform"
msgstr "不支持的平台"
#: knetworkconf/tdeselectdistrodlg.ui:63
#, no-c-format
msgid "Do not ask again"
msgstr "不要再次询问"
#: knetworkconf/tdeselectdistrodlg.ui:88
#, no-c-format
msgid ""
"<font size=\"+1\"><p align=\"center\"><b>Your Platform is Not Supported</b></"
"p></font>"
msgstr ""
"<font size=\"+1\"><p align=\"center\"><b>您的平台暂不支持</b></\n"
"p></font>"
#: knetworkconf/tdeselectdistrodlg.ui:96
#, no-c-format
msgid ""
"You may choose one of the following supported platforms if you are <b>sure</"
"b> your platform behaves the same as the chosen one. Please be sure, because "
"your current network configuration could be damaged."
msgstr ""
"您可以选择以下被支持的平台,如果您<b>确定</b>您的平台和所选择平台表现一致的"
"话。请务必确认这一点,因为您现在的网络配置可能因此被破坏。"