Francois Andriot 13 years ago
commit ce393d79d4

@ -0,0 +1,45 @@
Imlib Version 11
----------------
Imlib11 is linked with libpng12, which began life as libpng3. This is
in accordance with the practice of Redhat. The GDK version of imlib,
being part of GNOME 1, has remained linked with libpng2.
No library that links with this version of Imlib may also link with
libpng2.
No application that links with this version of Imlib may link with
libpng2, neither directly nor through a third library.
If you accidentally link an application with imlib and libpng2, the
application may behave in unpredictible ways, possibly crashing,
possibly emitting warnings similar to the following:
libpng warning: Application was compiled with png.h from libpng-1.2.1
libpng warning: Application is running with png.c from libpng-1.0.12
libpng error: Incompatible libpng version in application and library
Imlib Version 1
---------------
Imlib1 and gdk-imlib1 are compiled against libpng2. If you need to
build with libpng2, install the package imlib1-dev or gdk-imlib1-dev
as appropriate.
The Palette File
----------------
The system Imlib/Gdk-Imlib palette file was moved from the directory
`/etc/im' to `/etc/imlib'. This move may cause problems for users who
have a `.imrc' file in their home directory since that file may
contain a reference to the old location of the palette file. To
correct this problem, the "PaletteFile" entry should look like:
PaletteFile /etc/imlib/im_palette.pal
I believe this changed happened in late 1999.
-- Steve M. Robbins <smr@debian.org>, Sun Oct 19 15:11:42 2003

@ -0,0 +1,23 @@
Imlib Image Conversion
----------------------
The imlib and gdk-imlib libraries have a number of built-in image
conversion routines, and are capable of loading or saving in *at
least* the following formats: GIF, JPEG, PNG, TIFF, PS, BMP, XPM, and
PPM.
Prior to version 1.9.13, imlib and gdk-imlib could use an external
program, such as Imagemagick's "convert", to load or save images
in formats not handled internally to Imlib.
"All fallbacks failed."
-----------------------
This message indicates that the file you wished to load is not handled
by Imlib.
The remedy is to convert the image file by hand using, for example,
Imagemagick's "convert" command: "convert foo.rgb foo.png". Then
you'll have to fix up the application to use the new filename instead.

@ -0,0 +1,29 @@
libcaldav (0.6.5-2debian2) maverick; urgency=low
* Fixed RECURRENCE-ID modification with Zimbra CalDAV resources
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Sat, 28 Aug 2010 16:34:00 -0600
libcaldav (0.6.4-0debian0) lenny; urgency=low
* Added VTODO support
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Fri, 27 Aug 2010 18:53:00 -0600
libcaldav (0.6.3-0debian1) lenny; urgency=low
* Multiple VEVENT blocks in a single CardDAV response are now returned correctly
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Thu, 26 Aug 2010 15:40:00 -0600
libcaldav (0.6.2-0debian0) lenny; urgency=low
* Added "Connection: close" to the list of headers sent, so that server keep-alive (which causes long delays) is disabled.
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Sun, 18 Jul 2010 15:29:00 -0600
libcaldav (0.6.1-1debian0) lenny; urgency=low
* Initial Lenny build
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Mon, 31 May 2010 01:55:00 -0600

@ -0,0 +1,23 @@
Source: libcaldav
Build-Depends: debhelper (>= 5), quilt, libcurl4-gnutls-dev (>= 7.19), libglib2.0-dev, automake, autoconf, libtool, libltdl-dev
Section: graphics
Priority: optional
Maintainer: Timothy Pearson <kb9vqf@pearsoncomputing.net>
Standards-Version: 3.8.3
Package: libcaldav
Architecture: any
Section: libs
Depends: ${shlibs:Depends}
Description:
libcaldav provides a C interface for caldav PIM clients
Package: libcaldav-dev
Architecture: any
Section: libdevel
Depends: libcaldav (= ${binary:Version})
Description:
libcaldav provides a C interface for caldav PIM clients
.
This is the development package containing header files and link
libraries for libcaldav.

@ -0,0 +1,13 @@
This package was debianized by Timothy Pearson (kb9vqf@pearsoncomputing.net)
It was downloaded from http://sourceforge.net/projects/libcaldav/
Copyright:
Copyright 2008 by Michael Rasmussen (mir@datanom.net)
License:
All libraries in this package are released under the GPL
(/usr/share/common-licenses/GPL-3). The programs and examples are
under the GPL (/usr/share/common-licenses/GPL).

@ -0,0 +1,105 @@
#!/usr/bin/make -f
include /usr/share/quilt/quilt.make
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
# This has to be exported to make some magic below work.
export DH_OPTIONS
export CFLAGS = -g
ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
CFLAGS += -O0
else
CFLAGS += -O3
endif
# Suppress accidental execution of the auto-* tools, c.f.
# http://lists.debian.org/debian-devel/2001/debian-devel-200111/msg01416.html
no_auto_tools = ACLOCAL="`pwd`/missing aclocal" \
AUTOCONF="`pwd`/missing autoconf" \
AUTOMAKE="`pwd`/missing automake" \
AUTOHEADER="`pwd`/missing autoheader"
make_flags = moduledir=/usr/lib/gdk-imlib2 $(no_auto_tools)
build: $(QUILT_STAMPFN) build-stamp
build-stamp:
dh_testdir
./autogen.sh
./configure --prefix=/usr \
--mandir=/usr/share/man
$(MAKE) $(make_flags)
touch build-stamp
clean: unpatch
dh_testdir
dh_testroot
rm -f build-stamp
[ ! -f Makefile ] || $(MAKE) clean
[ ! -f Makefile ] || $(MAKE) distclean
dh_clean
install: DH_OPTIONS=
install: build
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
$(MAKE) $(make_flags) DESTDIR=`pwd`/debian/tmp install
dh_movefiles
# Library package
dh_install -plibcaldav --autodest debian/tmp/usr/lib/libcaldav.so*
# Developer package
mv debian/tmp/usr/include/libcaldav* debian/tmp/usr/include/libcaldav
dh_install -plibcaldav-dev --autodest debian/tmp/usr/lib/libcaldav.la
dh_install -plibcaldav-dev --autodest debian/tmp/usr/include/libcaldav/*
dh_install -plibcaldav-dev --autodest debian/tmp/usr/lib/pkgconfig/*
# This single target is used to build all the packages, all at once, or
# one at a time. So keep in mind: any options passed to commands here will
# affect _all_ packages. Anything you want to only affect one package
# should be put in another target, such as the install target.
binary-common:
dh_testdir
dh_testroot
dh_installdocs -A debian/README.Debian
dh_installexamples
dh_installmenu
dh_installcron
dh_installinfo
dh_installchangelogs ChangeLog
dh_link
dh_compress
dh_fixperms
dh_strip
dh_makeshlibs
dh_installdeb
dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
# Build architecture independent packages using the common target.
binary-indep: build install
$(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
# Build architecture dependent packages using the common target.
binary-arch: build install
$(MAKE) -f debian/rules DH_OPTIONS=-a binary-common
# Any other binary targets build just one binary package at a time.
binary-%: build install
make -f debian/rules binary-common DH_OPTIONS=-p$*
binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install

@ -0,0 +1,2 @@
version=3
ftp://ftp.gnome.org/pub/GNOME/sources/imlib/1.9/imlib-(.*)\.tar\.gz

@ -0,0 +1,45 @@
Imlib Version 11
----------------
Imlib11 is linked with libpng12, which began life as libpng3. This is
in accordance with the practice of Redhat. The GDK version of imlib,
being part of GNOME 1, has remained linked with libpng2.
No library that links with this version of Imlib may also link with
libpng2.
No application that links with this version of Imlib may link with
libpng2, neither directly nor through a third library.
If you accidentally link an application with imlib and libpng2, the
application may behave in unpredictible ways, possibly crashing,
possibly emitting warnings similar to the following:
libpng warning: Application was compiled with png.h from libpng-1.2.1
libpng warning: Application is running with png.c from libpng-1.0.12
libpng error: Incompatible libpng version in application and library
Imlib Version 1
---------------
Imlib1 and gdk-imlib1 are compiled against libpng2. If you need to
build with libpng2, install the package imlib1-dev or gdk-imlib1-dev
as appropriate.
The Palette File
----------------
The system Imlib/Gdk-Imlib palette file was moved from the directory
`/etc/im' to `/etc/imlib'. This move may cause problems for users who
have a `.imrc' file in their home directory since that file may
contain a reference to the old location of the palette file. To
correct this problem, the "PaletteFile" entry should look like:
PaletteFile /etc/imlib/im_palette.pal
I believe this changed happened in late 1999.
-- Steve M. Robbins <smr@debian.org>, Sun Oct 19 15:11:42 2003

@ -0,0 +1,23 @@
Imlib Image Conversion
----------------------
The imlib and gdk-imlib libraries have a number of built-in image
conversion routines, and are capable of loading or saving in *at
least* the following formats: GIF, JPEG, PNG, TIFF, PS, BMP, XPM, and
PPM.
Prior to version 1.9.13, imlib and gdk-imlib could use an external
program, such as Imagemagick's "convert", to load or save images
in formats not handled internally to Imlib.
"All fallbacks failed."
-----------------------
This message indicates that the file you wished to load is not handled
by Imlib.
The remedy is to convert the image file by hand using, for example,
Imagemagick's "convert" command: "convert foo.rgb foo.png". Then
you'll have to fix up the application to use the new filename instead.

@ -0,0 +1,17 @@
libcarddav (0.6.2-2debian2) maverick; urgency=low
* Modified contact list grabber to first execute a WebDAV directory list, then use the results to get only the contact files in that directory.
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Wed, 21 Jul 2010 02:55:00 -0600
libcarddav (0.6.2-0debian1) lenny; urgency=low
* Added "Connection: close" to the list of headers sent, so that server keep-alive (which causes long delays) is disabled.
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Sun, 18 Jul 2010 15:29:00 -0600
libcarddav (0.6.2-0debian0) lenny; urgency=low
* Initial Lenny build
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Mon, 31 May 2010 01:55:00 -0600

@ -0,0 +1,23 @@
Source: libcarddav
Build-Depends: debhelper (>= 5), libcurl4-gnutls-dev, libglib2.0-dev, quilt, automake, autoconf, libtool, libltdl-dev
Section: graphics
Priority: optional
Maintainer: Timothy Pearson <kb9vqf@pearsoncomputing.net>
Standards-Version: 3.8.4
Package: libcarddav
Architecture: any
Section: libs
Depends: ${shlibs:Depends}
Description:
libcarddav provides a C interface for carddav PIM clients
Package: libcarddav-dev
Architecture: any
Section: libdevel
Depends: libcarddav (= ${binary:Version})
Description:
libcarddav provides a C interface for carddav PIM clients
.
This is the development package containing header files and link
libraries for libcarddav.

@ -0,0 +1,14 @@
This package was debianized by Timothy Pearson (kb9vqf@pearsoncomputing.net)
It was created from unreleased sources derived from libcaldav
Copyright:
Copyright 2010 by Timothy Pearson (kb9vqf@pearsoncomputing.net)
Copyright 2008 by Michael Rasmussen (mir@datanom.net)
License:
All libraries in this package are released under the GPL
(/usr/share/common-licenses/GPL-3). The programs and examples are
under the GPL (/usr/share/common-licenses/GPL).

@ -0,0 +1,105 @@
#!/usr/bin/make -f
include /usr/share/quilt/quilt.make
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
# This has to be exported to make some magic below work.
export DH_OPTIONS
export CFLAGS = -g
ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
CFLAGS += -O0
else
CFLAGS += -O3
endif
# Suppress accidental execution of the auto-* tools, c.f.
# http://lists.debian.org/debian-devel/2001/debian-devel-200111/msg01416.html
no_auto_tools = ACLOCAL="`pwd`/missing aclocal" \
AUTOCONF="`pwd`/missing autoconf" \
AUTOMAKE="`pwd`/missing automake" \
AUTOHEADER="`pwd`/missing autoheader"
make_flags = moduledir=/usr/lib/gdk-imlib2 $(no_auto_tools)
build: $(QUILT_STAMPFN) build-stamp
build-stamp:
dh_testdir
./autogen.sh
./configure --prefix=/usr \
--mandir=/usr/share/man
$(MAKE) $(make_flags)
touch build-stamp
clean: unpatch
dh_testdir
dh_testroot
rm -f build-stamp
[ ! -f Makefile ] || $(MAKE) clean
[ ! -f Makefile ] || $(MAKE) distclean
dh_clean
install: DH_OPTIONS=
install: build
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
$(MAKE) $(make_flags) DESTDIR=`pwd`/debian/tmp install
dh_movefiles
# Library package
dh_install -plibcarddav --autodest debian/tmp/usr/lib/libcarddav.so*
# Developer package
mv debian/tmp/usr/include/libcarddav* debian/tmp/usr/include/libcarddav
dh_install -plibcarddav-dev --autodest debian/tmp/usr/lib/libcarddav.la
dh_install -plibcarddav-dev --autodest debian/tmp/usr/include/libcarddav/*
dh_install -plibcarddav-dev --autodest debian/tmp/usr/lib/pkgconfig/*
# This single target is used to build all the packages, all at once, or
# one at a time. So keep in mind: any options passed to commands here will
# affect _all_ packages. Anything you want to only affect one package
# should be put in another target, such as the install target.
binary-common:
dh_testdir
dh_testroot
dh_installdocs -A debian/README.Debian
dh_installexamples
dh_installmenu
dh_installcron
dh_installinfo
dh_installchangelogs ChangeLog
dh_link
dh_compress
dh_fixperms
dh_strip
dh_makeshlibs
dh_installdeb
dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
# Build architecture independent packages using the common target.
binary-indep: build install
$(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
# Build architecture dependent packages using the common target.
binary-arch: build install
$(MAKE) -f debian/rules DH_OPTIONS=-a binary-common
# Any other binary targets build just one binary package at a time.
binary-%: build install
make -f debian/rules binary-common DH_OPTIONS=-p$*
binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install

@ -0,0 +1,2 @@
version=3
ftp://ftp.gnome.org/pub/GNOME/sources/imlib/1.9/imlib-(.*)\.tar\.gz

@ -0,0 +1,45 @@
Imlib Version 11
----------------
Imlib11 is linked with libpng12, which began life as libpng3. This is
in accordance with the practice of Redhat. The GDK version of imlib,
being part of GNOME 1, has remained linked with libpng2.
No library that links with this version of Imlib may also link with
libpng2.
No application that links with this version of Imlib may link with
libpng2, neither directly nor through a third library.
If you accidentally link an application with imlib and libpng2, the
application may behave in unpredictible ways, possibly crashing,
possibly emitting warnings similar to the following:
libpng warning: Application was compiled with png.h from libpng-1.2.1
libpng warning: Application is running with png.c from libpng-1.0.12
libpng error: Incompatible libpng version in application and library
Imlib Version 1
---------------
Imlib1 and gdk-imlib1 are compiled against libpng2. If you need to
build with libpng2, install the package imlib1-dev or gdk-imlib1-dev
as appropriate.
The Palette File
----------------
The system Imlib/Gdk-Imlib palette file was moved from the directory
`/etc/im' to `/etc/imlib'. This move may cause problems for users who
have a `.imrc' file in their home directory since that file may
contain a reference to the old location of the palette file. To
correct this problem, the "PaletteFile" entry should look like:
PaletteFile /etc/imlib/im_palette.pal
I believe this changed happened in late 1999.
-- Steve M. Robbins <smr@debian.org>, Sun Oct 19 15:11:42 2003

@ -0,0 +1,23 @@
Imlib Image Conversion
----------------------
The imlib and gdk-imlib libraries have a number of built-in image
conversion routines, and are capable of loading or saving in *at
least* the following formats: GIF, JPEG, PNG, TIFF, PS, BMP, XPM, and
PPM.
Prior to version 1.9.13, imlib and gdk-imlib could use an external
program, such as Imagemagick's "convert", to load or save images
in formats not handled internally to Imlib.
"All fallbacks failed."
-----------------------
This message indicates that the file you wished to load is not handled
by Imlib.
The remedy is to convert the image file by hand using, for example,
Imagemagick's "convert" command: "convert foo.rgb foo.png". Then
you'll have to fix up the application to use the new filename instead.

@ -0,0 +1,29 @@
libcaldav (0.6.5-2debian2) maverick; urgency=low
* Fixed RECURRENCE-ID modification with Zimbra CalDAV resources
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Sat, 28 Aug 2010 16:34:00 -0600
libcaldav (0.6.4-0debian0) lenny; urgency=low
* Added VTODO support
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Fri, 27 Aug 2010 18:53:00 -0600
libcaldav (0.6.3-0debian1) lenny; urgency=low
* Multiple VEVENT blocks in a single CardDAV response are now returned correctly
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Thu, 26 Aug 2010 15:40:00 -0600
libcaldav (0.6.2-0debian0) lenny; urgency=low
* Added "Connection: close" to the list of headers sent, so that server keep-alive (which causes long delays) is disabled.
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Sun, 18 Jul 2010 15:29:00 -0600
libcaldav (0.6.1-1debian0) lenny; urgency=low
* Initial Lenny build
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Mon, 31 May 2010 01:55:00 -0600

@ -0,0 +1,23 @@
Source: libcaldav
Build-Depends: debhelper (>= 5), quilt, libcurl4-gnutls-dev (>= 7.19), libglib2.0-dev, automake, autoconf, libtool, libltdl-dev
Section: graphics
Priority: optional
Maintainer: Timothy Pearson <kb9vqf@pearsoncomputing.net>
Standards-Version: 3.8.3
Package: libcaldav
Architecture: any
Section: libs
Depends: ${shlibs:Depends}
Description:
libcaldav provides a C interface for caldav PIM clients
Package: libcaldav-dev
Architecture: any
Section: libdevel
Depends: libcaldav (= ${binary:Version})
Description:
libcaldav provides a C interface for caldav PIM clients
.
This is the development package containing header files and link
libraries for libcaldav.

@ -0,0 +1,13 @@
This package was debianized by Timothy Pearson (kb9vqf@pearsoncomputing.net)
It was downloaded from http://sourceforge.net/projects/libcaldav/
Copyright:
Copyright 2008 by Michael Rasmussen (mir@datanom.net)
License:
All libraries in this package are released under the GPL
(/usr/share/common-licenses/GPL-3). The programs and examples are
under the GPL (/usr/share/common-licenses/GPL).

@ -0,0 +1,105 @@
#!/usr/bin/make -f
include /usr/share/quilt/quilt.make
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
# This has to be exported to make some magic below work.
export DH_OPTIONS
export CFLAGS = -g
ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
CFLAGS += -O0
else
CFLAGS += -O3
endif
# Suppress accidental execution of the auto-* tools, c.f.
# http://lists.debian.org/debian-devel/2001/debian-devel-200111/msg01416.html
no_auto_tools = ACLOCAL="`pwd`/missing aclocal" \
AUTOCONF="`pwd`/missing autoconf" \
AUTOMAKE="`pwd`/missing automake" \
AUTOHEADER="`pwd`/missing autoheader"
make_flags = moduledir=/usr/lib/gdk-imlib2 $(no_auto_tools)
build: $(QUILT_STAMPFN) build-stamp
build-stamp:
dh_testdir
./autogen.sh
./configure --prefix=/usr \
--mandir=/usr/share/man
$(MAKE) $(make_flags)
touch build-stamp
clean: unpatch
dh_testdir
dh_testroot
rm -f build-stamp
[ ! -f Makefile ] || $(MAKE) clean
[ ! -f Makefile ] || $(MAKE) distclean
dh_clean
install: DH_OPTIONS=
install: build
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
$(MAKE) $(make_flags) DESTDIR=`pwd`/debian/tmp install
dh_movefiles
# Library package
dh_install -plibcaldav --autodest debian/tmp/usr/lib/libcaldav.so*
# Developer package
mv debian/tmp/usr/include/libcaldav* debian/tmp/usr/include/libcaldav
dh_install -plibcaldav-dev --autodest debian/tmp/usr/lib/libcaldav.la
dh_install -plibcaldav-dev --autodest debian/tmp/usr/include/libcaldav/*
dh_install -plibcaldav-dev --autodest debian/tmp/usr/lib/pkgconfig/*
# This single target is used to build all the packages, all at once, or
# one at a time. So keep in mind: any options passed to commands here will
# affect _all_ packages. Anything you want to only affect one package
# should be put in another target, such as the install target.
binary-common:
dh_testdir
dh_testroot
dh_installdocs -A debian/README.Debian
dh_installexamples
dh_installmenu
dh_installcron
dh_installinfo
dh_installchangelogs ChangeLog
dh_link
dh_compress
dh_fixperms
dh_strip
dh_makeshlibs
dh_installdeb
dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
# Build architecture independent packages using the common target.
binary-indep: build install
$(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
# Build architecture dependent packages using the common target.
binary-arch: build install
$(MAKE) -f debian/rules DH_OPTIONS=-a binary-common
# Any other binary targets build just one binary package at a time.
binary-%: build install
make -f debian/rules binary-common DH_OPTIONS=-p$*
binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install

@ -0,0 +1,2 @@
version=3
ftp://ftp.gnome.org/pub/GNOME/sources/imlib/1.9/imlib-(.*)\.tar\.gz

@ -0,0 +1,45 @@
Imlib Version 11
----------------
Imlib11 is linked with libpng12, which began life as libpng3. This is
in accordance with the practice of Redhat. The GDK version of imlib,
being part of GNOME 1, has remained linked with libpng2.
No library that links with this version of Imlib may also link with
libpng2.
No application that links with this version of Imlib may link with
libpng2, neither directly nor through a third library.
If you accidentally link an application with imlib and libpng2, the
application may behave in unpredictible ways, possibly crashing,
possibly emitting warnings similar to the following:
libpng warning: Application was compiled with png.h from libpng-1.2.1
libpng warning: Application is running with png.c from libpng-1.0.12
libpng error: Incompatible libpng version in application and library
Imlib Version 1
---------------
Imlib1 and gdk-imlib1 are compiled against libpng2. If you need to
build with libpng2, install the package imlib1-dev or gdk-imlib1-dev
as appropriate.
The Palette File
----------------
The system Imlib/Gdk-Imlib palette file was moved from the directory
`/etc/im' to `/etc/imlib'. This move may cause problems for users who
have a `.imrc' file in their home directory since that file may
contain a reference to the old location of the palette file. To
correct this problem, the "PaletteFile" entry should look like:
PaletteFile /etc/imlib/im_palette.pal
I believe this changed happened in late 1999.
-- Steve M. Robbins <smr@debian.org>, Sun Oct 19 15:11:42 2003

@ -0,0 +1,23 @@
Imlib Image Conversion
----------------------
The imlib and gdk-imlib libraries have a number of built-in image
conversion routines, and are capable of loading or saving in *at
least* the following formats: GIF, JPEG, PNG, TIFF, PS, BMP, XPM, and
PPM.
Prior to version 1.9.13, imlib and gdk-imlib could use an external
program, such as Imagemagick's "convert", to load or save images
in formats not handled internally to Imlib.
"All fallbacks failed."
-----------------------
This message indicates that the file you wished to load is not handled
by Imlib.
The remedy is to convert the image file by hand using, for example,
Imagemagick's "convert" command: "convert foo.rgb foo.png". Then
you'll have to fix up the application to use the new filename instead.

@ -0,0 +1,17 @@
libcarddav (0.6.2-2debian2) maverick; urgency=low
* Modified contact list grabber to first execute a WebDAV directory list, then use the results to get only the contact files in that directory.
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Wed, 21 Jul 2010 02:55:00 -0600
libcarddav (0.6.2-0debian1) lenny; urgency=low
* Added "Connection: close" to the list of headers sent, so that server keep-alive (which causes long delays) is disabled.
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Sun, 18 Jul 2010 15:29:00 -0600
libcarddav (0.6.2-0debian0) lenny; urgency=low
* Initial Lenny build
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Mon, 31 May 2010 01:55:00 -0600

@ -0,0 +1,23 @@
Source: libcarddav
Build-Depends: debhelper (>= 5), libcurl4-gnutls-dev, libglib2.0-dev, quilt, automake, autoconf, libtool, libltdl-dev
Section: graphics
Priority: optional
Maintainer: Timothy Pearson <kb9vqf@pearsoncomputing.net>
Standards-Version: 3.8.4
Package: libcarddav
Architecture: any
Section: libs
Depends: ${shlibs:Depends}
Description:
libcarddav provides a C interface for carddav PIM clients
Package: libcarddav-dev
Architecture: any
Section: libdevel
Depends: libcarddav (= ${binary:Version})
Description:
libcarddav provides a C interface for carddav PIM clients
.
This is the development package containing header files and link
libraries for libcarddav.

@ -0,0 +1,14 @@
This package was debianized by Timothy Pearson (kb9vqf@pearsoncomputing.net)
It was created from unreleased sources derived from libcaldav
Copyright:
Copyright 2010 by Timothy Pearson (kb9vqf@pearsoncomputing.net)
Copyright 2008 by Michael Rasmussen (mir@datanom.net)
License:
All libraries in this package are released under the GPL
(/usr/share/common-licenses/GPL-3). The programs and examples are
under the GPL (/usr/share/common-licenses/GPL).

@ -0,0 +1,105 @@
#!/usr/bin/make -f
include /usr/share/quilt/quilt.make
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
# This has to be exported to make some magic below work.
export DH_OPTIONS
export CFLAGS = -g
ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
CFLAGS += -O0
else
CFLAGS += -O3
endif
# Suppress accidental execution of the auto-* tools, c.f.
# http://lists.debian.org/debian-devel/2001/debian-devel-200111/msg01416.html
no_auto_tools = ACLOCAL="`pwd`/missing aclocal" \
AUTOCONF="`pwd`/missing autoconf" \
AUTOMAKE="`pwd`/missing automake" \
AUTOHEADER="`pwd`/missing autoheader"
make_flags = moduledir=/usr/lib/gdk-imlib2 $(no_auto_tools)
build: $(QUILT_STAMPFN) build-stamp
build-stamp:
dh_testdir
./autogen.sh
./configure --prefix=/usr \
--mandir=/usr/share/man
$(MAKE) $(make_flags)
touch build-stamp
clean: unpatch
dh_testdir
dh_testroot
rm -f build-stamp
[ ! -f Makefile ] || $(MAKE) clean
[ ! -f Makefile ] || $(MAKE) distclean
dh_clean
install: DH_OPTIONS=
install: build
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
$(MAKE) $(make_flags) DESTDIR=`pwd`/debian/tmp install
dh_movefiles
# Library package
dh_install -plibcarddav --autodest debian/tmp/usr/lib/libcarddav.so*
# Developer package
mv debian/tmp/usr/include/libcarddav* debian/tmp/usr/include/libcarddav
dh_install -plibcarddav-dev --autodest debian/tmp/usr/lib/libcarddav.la
dh_install -plibcarddav-dev --autodest debian/tmp/usr/include/libcarddav/*
dh_install -plibcarddav-dev --autodest debian/tmp/usr/lib/pkgconfig/*
# This single target is used to build all the packages, all at once, or
# one at a time. So keep in mind: any options passed to commands here will
# affect _all_ packages. Anything you want to only affect one package
# should be put in another target, such as the install target.
binary-common:
dh_testdir
dh_testroot
dh_installdocs -A debian/README.Debian
dh_installexamples
dh_installmenu
dh_installcron
dh_installinfo
dh_installchangelogs ChangeLog
dh_link
dh_compress
dh_fixperms
dh_strip
dh_makeshlibs
dh_installdeb
dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
# Build architecture independent packages using the common target.
binary-indep: build install
$(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
# Build architecture dependent packages using the common target.
binary-arch: build install
$(MAKE) -f debian/rules DH_OPTIONS=-a binary-common
# Any other binary targets build just one binary package at a time.
binary-%: build install
make -f debian/rules binary-common DH_OPTIONS=-p$*
binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install

@ -0,0 +1,2 @@
version=3
ftp://ftp.gnome.org/pub/GNOME/sources/imlib/1.9/imlib-(.*)\.tar\.gz

@ -0,0 +1,45 @@
Imlib Version 11
----------------
Imlib11 is linked with libpng12, which began life as libpng3. This is
in accordance with the practice of Redhat. The GDK version of imlib,
being part of GNOME 1, has remained linked with libpng2.
No library that links with this version of Imlib may also link with
libpng2.
No application that links with this version of Imlib may link with
libpng2, neither directly nor through a third library.
If you accidentally link an application with imlib and libpng2, the
application may behave in unpredictible ways, possibly crashing,
possibly emitting warnings similar to the following:
libpng warning: Application was compiled with png.h from libpng-1.2.1
libpng warning: Application is running with png.c from libpng-1.0.12
libpng error: Incompatible libpng version in application and library
Imlib Version 1
---------------
Imlib1 and gdk-imlib1 are compiled against libpng2. If you need to
build with libpng2, install the package imlib1-dev or gdk-imlib1-dev
as appropriate.
The Palette File
----------------
The system Imlib/Gdk-Imlib palette file was moved from the directory
`/etc/im' to `/etc/imlib'. This move may cause problems for users who
have a `.imrc' file in their home directory since that file may
contain a reference to the old location of the palette file. To
correct this problem, the "PaletteFile" entry should look like:
PaletteFile /etc/imlib/im_palette.pal
I believe this changed happened in late 1999.
-- Steve M. Robbins <smr@debian.org>, Sun Oct 19 15:11:42 2003

@ -0,0 +1,23 @@
Imlib Image Conversion
----------------------
The imlib and gdk-imlib libraries have a number of built-in image
conversion routines, and are capable of loading or saving in *at
least* the following formats: GIF, JPEG, PNG, TIFF, PS, BMP, XPM, and
PPM.
Prior to version 1.9.13, imlib and gdk-imlib could use an external
program, such as Imagemagick's "convert", to load or save images
in formats not handled internally to Imlib.
"All fallbacks failed."
-----------------------
This message indicates that the file you wished to load is not handled
by Imlib.
The remedy is to convert the image file by hand using, for example,
Imagemagick's "convert" command: "convert foo.rgb foo.png". Then
you'll have to fix up the application to use the new filename instead.

@ -0,0 +1,29 @@
libcaldav (0.6.5-2debian2) maverick; urgency=low
* Fixed RECURRENCE-ID modification with Zimbra CalDAV resources
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Sat, 28 Aug 2010 16:34:00 -0600
libcaldav (0.6.4-0debian0) lenny; urgency=low
* Added VTODO support
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Fri, 27 Aug 2010 18:53:00 -0600
libcaldav (0.6.3-0debian1) lenny; urgency=low
* Multiple VEVENT blocks in a single CardDAV response are now returned correctly
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Thu, 26 Aug 2010 15:40:00 -0600
libcaldav (0.6.2-0debian0) lenny; urgency=low
* Added "Connection: close" to the list of headers sent, so that server keep-alive (which causes long delays) is disabled.
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Sun, 18 Jul 2010 15:29:00 -0600
libcaldav (0.6.1-1debian0) lenny; urgency=low
* Initial Lenny build
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Mon, 31 May 2010 01:55:00 -0600

@ -0,0 +1,23 @@
Source: libcaldav
Build-Depends: debhelper (>= 5), quilt, libcurl4-gnutls-dev (>= 7.19), libglib2.0-dev, automake, autoconf, libtool, libltdl-dev
Section: graphics
Priority: optional
Maintainer: Timothy Pearson <kb9vqf@pearsoncomputing.net>
Standards-Version: 3.8.3
Package: libcaldav
Architecture: any
Section: libs
Depends: ${shlibs:Depends}
Description:
libcaldav provides a C interface for caldav PIM clients
Package: libcaldav-dev
Architecture: any
Section: libdevel
Depends: libcaldav (= ${binary:Version})
Description:
libcaldav provides a C interface for caldav PIM clients
.
This is the development package containing header files and link
libraries for libcaldav.

@ -0,0 +1,13 @@
This package was debianized by Timothy Pearson (kb9vqf@pearsoncomputing.net)
It was downloaded from http://sourceforge.net/projects/libcaldav/
Copyright:
Copyright 2008 by Michael Rasmussen (mir@datanom.net)
License:
All libraries in this package are released under the GPL
(/usr/share/common-licenses/GPL-3). The programs and examples are
under the GPL (/usr/share/common-licenses/GPL).

@ -0,0 +1,105 @@
#!/usr/bin/make -f
include /usr/share/quilt/quilt.make
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
# This has to be exported to make some magic below work.
export DH_OPTIONS
export CFLAGS = -g
ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
CFLAGS += -O0
else
CFLAGS += -O3
endif
# Suppress accidental execution of the auto-* tools, c.f.
# http://lists.debian.org/debian-devel/2001/debian-devel-200111/msg01416.html
no_auto_tools = ACLOCAL="`pwd`/missing aclocal" \
AUTOCONF="`pwd`/missing autoconf" \
AUTOMAKE="`pwd`/missing automake" \
AUTOHEADER="`pwd`/missing autoheader"
make_flags = moduledir=/usr/lib/gdk-imlib2 $(no_auto_tools)
build: $(QUILT_STAMPFN) build-stamp
build-stamp:
dh_testdir
./autogen.sh
./configure --prefix=/usr \
--mandir=/usr/share/man
$(MAKE) $(make_flags)
touch build-stamp
clean: unpatch
dh_testdir
dh_testroot
rm -f build-stamp
[ ! -f Makefile ] || $(MAKE) clean
[ ! -f Makefile ] || $(MAKE) distclean
dh_clean
install: DH_OPTIONS=
install: build
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
$(MAKE) $(make_flags) DESTDIR=`pwd`/debian/tmp install
dh_movefiles
# Library package
dh_install -plibcaldav --autodest debian/tmp/usr/lib/libcaldav.so*
# Developer package
mv debian/tmp/usr/include/libcaldav* debian/tmp/usr/include/libcaldav
dh_install -plibcaldav-dev --autodest debian/tmp/usr/lib/libcaldav.la
dh_install -plibcaldav-dev --autodest debian/tmp/usr/include/libcaldav/*
dh_install -plibcaldav-dev --autodest debian/tmp/usr/lib/pkgconfig/*
# This single target is used to build all the packages, all at once, or
# one at a time. So keep in mind: any options passed to commands here will
# affect _all_ packages. Anything you want to only affect one package
# should be put in another target, such as the install target.
binary-common:
dh_testdir
dh_testroot
dh_installdocs -A debian/README.Debian
dh_installexamples
dh_installmenu
dh_installcron
dh_installinfo
dh_installchangelogs ChangeLog
dh_link
dh_compress
dh_fixperms
dh_strip
dh_makeshlibs
dh_installdeb
dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
# Build architecture independent packages using the common target.
binary-indep: build install
$(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
# Build architecture dependent packages using the common target.
binary-arch: build install
$(MAKE) -f debian/rules DH_OPTIONS=-a binary-common
# Any other binary targets build just one binary package at a time.
binary-%: build install
make -f debian/rules binary-common DH_OPTIONS=-p$*
binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install

@ -0,0 +1,2 @@
version=3
ftp://ftp.gnome.org/pub/GNOME/sources/imlib/1.9/imlib-(.*)\.tar\.gz

@ -0,0 +1,45 @@
Imlib Version 11
----------------
Imlib11 is linked with libpng12, which began life as libpng3. This is
in accordance with the practice of Redhat. The GDK version of imlib,
being part of GNOME 1, has remained linked with libpng2.
No library that links with this version of Imlib may also link with
libpng2.
No application that links with this version of Imlib may link with
libpng2, neither directly nor through a third library.
If you accidentally link an application with imlib and libpng2, the
application may behave in unpredictible ways, possibly crashing,
possibly emitting warnings similar to the following:
libpng warning: Application was compiled with png.h from libpng-1.2.1
libpng warning: Application is running with png.c from libpng-1.0.12
libpng error: Incompatible libpng version in application and library
Imlib Version 1
---------------
Imlib1 and gdk-imlib1 are compiled against libpng2. If you need to
build with libpng2, install the package imlib1-dev or gdk-imlib1-dev
as appropriate.
The Palette File
----------------
The system Imlib/Gdk-Imlib palette file was moved from the directory
`/etc/im' to `/etc/imlib'. This move may cause problems for users who
have a `.imrc' file in their home directory since that file may
contain a reference to the old location of the palette file. To
correct this problem, the "PaletteFile" entry should look like:
PaletteFile /etc/imlib/im_palette.pal
I believe this changed happened in late 1999.
-- Steve M. Robbins <smr@debian.org>, Sun Oct 19 15:11:42 2003

@ -0,0 +1,23 @@
Imlib Image Conversion
----------------------
The imlib and gdk-imlib libraries have a number of built-in image
conversion routines, and are capable of loading or saving in *at
least* the following formats: GIF, JPEG, PNG, TIFF, PS, BMP, XPM, and
PPM.
Prior to version 1.9.13, imlib and gdk-imlib could use an external
program, such as Imagemagick's "convert", to load or save images
in formats not handled internally to Imlib.
"All fallbacks failed."
-----------------------
This message indicates that the file you wished to load is not handled
by Imlib.
The remedy is to convert the image file by hand using, for example,
Imagemagick's "convert" command: "convert foo.rgb foo.png". Then
you'll have to fix up the application to use the new filename instead.

@ -0,0 +1,17 @@
libcarddav (0.6.2-2debian2) maverick; urgency=low
* Modified contact list grabber to first execute a WebDAV directory list, then use the results to get only the contact files in that directory.
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Wed, 21 Jul 2010 02:55:00 -0600
libcarddav (0.6.2-0debian1) lenny; urgency=low
* Added "Connection: close" to the list of headers sent, so that server keep-alive (which causes long delays) is disabled.
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Sun, 18 Jul 2010 15:29:00 -0600
libcarddav (0.6.2-0debian0) lenny; urgency=low
* Initial Lenny build
-- Timothy Pearson <kb9vqf@pearsoncomputing.net> Mon, 31 May 2010 01:55:00 -0600

@ -0,0 +1,23 @@
Source: libcarddav
Build-Depends: debhelper (>= 5), libcurl4-gnutls-dev, libglib2.0-dev, quilt, automake, autoconf, libtool, libltdl-dev
Section: graphics
Priority: optional
Maintainer: Timothy Pearson <kb9vqf@pearsoncomputing.net>
Standards-Version: 3.8.4
Package: libcarddav
Architecture: any
Section: libs
Depends: ${shlibs:Depends}
Description:
libcarddav provides a C interface for carddav PIM clients
Package: libcarddav-dev
Architecture: any
Section: libdevel
Depends: libcarddav (= ${binary:Version})
Description:
libcarddav provides a C interface for carddav PIM clients
.
This is the development package containing header files and link
libraries for libcarddav.

@ -0,0 +1,14 @@
This package was debianized by Timothy Pearson (kb9vqf@pearsoncomputing.net)
It was created from unreleased sources derived from libcaldav
Copyright:
Copyright 2010 by Timothy Pearson (kb9vqf@pearsoncomputing.net)
Copyright 2008 by Michael Rasmussen (mir@datanom.net)
License:
All libraries in this package are released under the GPL
(/usr/share/common-licenses/GPL-3). The programs and examples are
under the GPL (/usr/share/common-licenses/GPL).

@ -0,0 +1,105 @@
#!/usr/bin/make -f
include /usr/share/quilt/quilt.make
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
# This has to be exported to make some magic below work.
export DH_OPTIONS
export CFLAGS = -g
ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
CFLAGS += -O0
else
CFLAGS += -O3
endif
# Suppress accidental execution of the auto-* tools, c.f.
# http://lists.debian.org/debian-devel/2001/debian-devel-200111/msg01416.html
no_auto_tools = ACLOCAL="`pwd`/missing aclocal" \
AUTOCONF="`pwd`/missing autoconf" \
AUTOMAKE="`pwd`/missing automake" \
AUTOHEADER="`pwd`/missing autoheader"
make_flags = moduledir=/usr/lib/gdk-imlib2 $(no_auto_tools)
build: $(QUILT_STAMPFN) build-stamp
build-stamp:
dh_testdir
./autogen.sh
./configure --prefix=/usr \
--mandir=/usr/share/man
$(MAKE) $(make_flags)
touch build-stamp
clean: unpatch
dh_testdir
dh_testroot
rm -f build-stamp
[ ! -f Makefile ] || $(MAKE) clean
[ ! -f Makefile ] || $(MAKE) distclean
dh_clean
install: DH_OPTIONS=
install: build
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
$(MAKE) $(make_flags) DESTDIR=`pwd`/debian/tmp install
dh_movefiles
# Library package
dh_install -plibcarddav --autodest debian/tmp/usr/lib/libcarddav.so*
# Developer package
mv debian/tmp/usr/include/libcarddav* debian/tmp/usr/include/libcarddav
dh_install -plibcarddav-dev --autodest debian/tmp/usr/lib/libcarddav.la
dh_install -plibcarddav-dev --autodest debian/tmp/usr/include/libcarddav/*
dh_install -plibcarddav-dev --autodest debian/tmp/usr/lib/pkgconfig/*
# This single target is used to build all the packages, all at once, or
# one at a time. So keep in mind: any options passed to commands here will
# affect _all_ packages. Anything you want to only affect one package
# should be put in another target, such as the install target.
binary-common:
dh_testdir
dh_testroot
dh_installdocs -A debian/README.Debian
dh_installexamples
dh_installmenu
dh_installcron
dh_installinfo
dh_installchangelogs ChangeLog
dh_link
dh_compress
dh_fixperms
dh_strip
dh_makeshlibs
dh_installdeb
dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
# Build architecture independent packages using the common target.
binary-indep: build install
$(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
# Build architecture dependent packages using the common target.
binary-arch: build install
$(MAKE) -f debian/rules DH_OPTIONS=-a binary-common
# Any other binary targets build just one binary package at a time.
binary-%: build install
make -f debian/rules binary-common DH_OPTIONS=-p$*
binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install

@ -0,0 +1,2 @@
version=3
ftp://ftp.gnome.org/pub/GNOME/sources/imlib/1.9/imlib-(.*)\.tar\.gz
Loading…
Cancel
Save