You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
259 lines
15 KiB
259 lines
15 KiB
-----
|
|
Index
|
|
-----
|
|
A) Environment preparation
|
|
B) Notes about scripts
|
|
C) How to use the scripts
|
|
|
|
|
|
--------------------------
|
|
A) Environment preparation
|
|
--------------------------
|
|
0) Initial notes
|
|
- this guide has been prepared based on a clean debian testing netinstall system without any other DE.
|
|
It should work for other debian/ubuntu distros as well, but eventually you may run into small differences
|
|
here and there.
|
|
- you can change folder names below, as long as you update the "_config.sh" file accordingly.
|
|
|
|
1) Install following packages: bc, cdbs, git, pbuilder, rsync and required dependencies.
|
|
NOTE: sudo should already be installed. If not, install sudo as well.
|
|
|
|
2) Create a base folder for TDE, hereafter referred to as TDE_DIR (for example $HOME/tde_src)
|
|
|
|
3) Create the following folders [ see NOTE at point 0) about folder names ]
|
|
- in TDE_DIR: 0_logs : contains log files for repo update and global builds (more on this later)
|
|
1_git : contains the git repo clones and build hook scripts
|
|
2_build: folder used for build preparation and for local builds
|
|
3_repo : local repo for package installation (to be configured in /etc/apt/sources.list)
|
|
buildscripts: contains a local copy of the build scripts, which can be modified as required
|
|
- in TDE_DIR/1_git:
|
|
edeps : contains extra dependency modules necessary to build TDE (this folder is not necessary
|
|
is pre-built extra dependencies are used - see point 9 for more info)
|
|
hooks : contains build hook scripts to execute ad-hoc code before and after the building process.
|
|
Mainly used to apply patches automatically during the building process
|
|
|
|
4) Clone TDE git repositories
|
|
- TDE main repo
|
|
cd "$TDE_DIR/1_git"
|
|
git clone https://mirror.git.trinitydesktop.org/gitea/TDE/tde
|
|
cd tde
|
|
git submodule init -- scripts
|
|
git submodule update -- scripts
|
|
./scripts/switch_all_submodules_to_head_and_clean anonymous
|
|
|
|
5) Add your user to the sudo group (not required if you are root)
|
|
su -c "adduser <username> sudo"
|
|
Logout and login again to make sure the new settings are applied.
|
|
* Optionally, consider extending your sudo timeout interval to avoid having to type your password too often
|
|
(this could be quite painful especially during long builds, which would not be able to complete if unattended).
|
|
To do this, type "sudo visudo" and then add "Defaults timestamp_timeout=<new timeout>", where the value is in
|
|
minutes. Use a value of -1 to set an infinite timeout.
|
|
|
|
6) Copy the files from "TDE_DIR/1_git/tde/packaging/debian/_buildscripts/local/additional_files" folder
|
|
to the respectivily named folders.
|
|
|
|
7) Create pbuilder base package with the command:
|
|
sudo pbuilder create
|
|
If you wish to build for a different distro or architecture, use the command:
|
|
sudo DISTRO_NAME=<target distro> ARCHITECTURE=<target architecture> pbuilder create
|
|
|
|
8) Setup the build scripts locally:
|
|
- copy build scripts from "TDE_DIR/1_git/tde/packaging/debian/_buildscripts/local" to "TDE_DIR/buildscripts"
|
|
and make sure all shell scripts are executable
|
|
- cd "TDE_DIR/buildscripts"
|
|
- cp ./internals/_config_template.sh _config.sh
|
|
- edit "_config.sh" to set your preferences and check that the various folder names match the structure on your disk.
|
|
Make sure to set the following variables:
|
|
* TDE_DIR to the correct path.
|
|
* DISTRO, DISTRO_NAME and ARCHITECTURE to match the distro and architecture you want to build for if different
|
|
from your current setup. Otherwise the variables can be left empty and auto detection will be performed.
|
|
* UPDATE_BRANCHES to the branches you want to keep updated from the main repositories.
|
|
* DEFAULT_REPO_BRANCH to the branch to check out at the end of the repositories update process.
|
|
|
|
9) Some additional packages (referred to as extra dependencies) are required to build and install TDE in debian/ubuntu.
|
|
These modules can be built locally, but the procedure is a bit cumbersome. Alternatively, Slavek Banko's
|
|
pre-built binaries can be used.
|
|
|
|
9.1) Using pre-built extra dependencies (recommended option)
|
|
- open "_config.sh" and set the variable USE_PREBUILD_EXTRA_DEPS to "y" (this is the default initial setting)
|
|
- add the following lines to the /etc/apt/sources.list file. This will setup Slavek's repositories in apt for
|
|
installing the extra dependency packages when TDE is installed.
|
|
* For R14.1.x series (repository branch "master")
|
|
# --- SLAVEK BANKO'S EXTRA DEPENDENCIES REPOSITORY ---
|
|
# - temporarily disabled -
|
|
# - http://mirror.ppa.trinitydesktop.org/trinity-testing/dists <YOUR DISTRO> deps
|
|
deb http://mirror.ppa.trinitydesktop.org/trinity-sb <YOUR DISTRO> deps-r14
|
|
* For R14.0.x series (repository branch "r14.0.x")
|
|
# --- SLAVEK BANKO'S EXTRA DEPENDENCIES REPOSITORY ---
|
|
deb http://mirror.ppa.trinitydesktop.org/trinity-sb <YOUR DISTRO> deps-r14
|
|
For example:
|
|
deb http://mirror.ppa.trinitydesktop.org/trinity-sb buster deps-r14
|
|
- install package dirmngr if required
|
|
- import Slavek's GPG key into your apt keyring
|
|
sudo apt-key adv --keyserver pool.sks-keyservers.net --recv-key A04BE668
|
|
|
|
9.2) Building extra dependencies locally
|
|
- open "_config.sh" and set the variable USE_PREBUILD_EXTRA_DEPS to "n"
|
|
- install the following packages: links2 and required dependencies.
|
|
- using links2 (or another browser), download the source code for the extra dependency modules from
|
|
Slavek's PPA (usually more recently updated):
|
|
https://quickbuild.pearsoncomputing.net/~slavek-banko/+archive/deps-r14/+packages
|
|
or from the official PPA:
|
|
https://quickbuild.pearsoncomputing.net/~trinity/+archive/trinity-nightly-build-dependencies/+packages
|
|
NOTES:
|
|
* Once the page open in your browser, select your distro in the combobox near the "Filter" button and click
|
|
the button to update. You should get a list of 10-15 modules, depending on the distro.
|
|
* Click on one module at a time, it will expand (or open another page) and show a list of .deb and other files.
|
|
* Save those files (exclude .deb files. Only .orig.tar.xz, .dsc, .debian.tar.xz are required) and store
|
|
them to TDE_DIR/1_git/edeps/<MODULE NAME> folder (one folder per module).
|
|
|
|
10) Add the following lines to the /etc/apt/sources.list file. This will setup your local repo in apt.
|
|
# --- LOCAL TDE REPOSITORY ---
|
|
deb [trusted=yes] file:TDE_DIR/3_repo <YOUR DISTRO> main
|
|
For example:
|
|
deb [trusted=yes] file:/home/tde_src/3_repo buster main
|
|
|
|
|
|
|
|
----------------------
|
|
B) Notes about scripts
|
|
----------------------
|
|
1) * Notes *
|
|
Modules are built using the build_module.sh script. After the build is completed, the installation .deb files are located in TDE_DIR/2_build/debs/<MODULE NAME>/ and the source code and build reports in TDE_DIR/2_build/debs/<MODULE NAME>/src/
|
|
|
|
The source code can be either the git repo or a local copy in TDE_DIR/2_build/build/<MODULE NAME>.
|
|
A module can be built in a clean chroot environment using pbuilder (default option) or locally using dpkg-buildpackage (useful for quick debugging/developing).
|
|
When using pbuilder, a hook can be used to invoke a shell when the build fails.
|
|
|
|
Build logs are automatically stored to files, but can also be displayed during the build process.
|
|
The default location of a module build log is TDE_DIR/2_build/debs/<MODULE NAME>/src/__build__.log
|
|
|
|
When building sets of modules or the whole TDE, a global build summary is automatically stored to TDE_DIR/0_logs/build_result.log to quickly check what built and what failed. It is recommended to delete that file before starting a new TDE build (if not, build results will be appended at the end of the file).
|
|
|
|
|
|
2) * Scripts description *
|
|
- scripts in 'internals' folder
|
|
Scripts used intenally by other scripts. No need for invoking these directly.
|
|
|
|
- update_git_repository.sh:
|
|
Script used to update the local clone of the git repositories.
|
|
It is possible to update multiple branches as specified by the variable UPDATE_BRANCHES in the configuration
|
|
file. After the update is completed, the local repositories will be switched to the branch specified by the
|
|
DEFAULT_REPO_BRANCH variable.
|
|
The script can also be used to switch the local repositories to a particular branch, without performing any update.
|
|
Usage:
|
|
update_git_repository.sh [options]
|
|
Options:
|
|
-i (Incremental) : in case the previous update was interrupted, continue from the last known updated module.
|
|
(useful on slow/unstable internet connections). If the previous update had completed,
|
|
this option is ignored.
|
|
-v (Verbose) : display and log more output. Useful for troubleshooting.
|
|
-ub "<branches>" (Update Branches) : allows to specify the branches to update. This override the variable
|
|
UPDATE_BRANCHES in the configuration file. If a single branch is specified and the
|
|
'-db'/'-sb' paraemters are not used, '-ub' can be used to update and switch a single branch.
|
|
-db <branch> (Default Branch) : allows to specify the default branch. This override the variable
|
|
DEFAULT_REPO_BRANCH in the configuration file.
|
|
This option is only used if the argument '-so' is not specified.
|
|
-so <branch> (Switch Only) : switch the local repositories to the specified branch, without doing any update.
|
|
If '-ub' is used, the '-so' branch name must be one of those specified in the 'ub' branches.
|
|
|
|
- build_module.sh
|
|
Build a single module.
|
|
Usage:
|
|
build_module.sh [options] module_name
|
|
Options:
|
|
-g (Git) : build from git repo sources. If missing, build from the local copy in build folder.
|
|
-l (Local) : build the module locally. If missing, build in a clean chroot environment
|
|
-sl (Show Log) : output the building logs to terminal while the build is ongoing
|
|
-lr (Log Result) : log (append) build result (OK, FAILED) to TDE_DIR/0_logs/build_result.log file
|
|
-sh (Shell Hook) : use a shell hook for failing builds, only valid if building using pbuilder (clean chroot environment)
|
|
-po (Prepare Only): only prepare the source folder but do not build the module. Useful to prepare the source code before
|
|
doing local changes/development. The module can then be built from the modified local folder
|
|
-d (Debug) : enable debug symbols if possible (debian/rules file must contain "RelWithDebInfo" for this to work)
|
|
-ip (Internal Pbuilder): build using internal pbuilder mode (experimental)
|
|
|
|
- <dd>_<set_name>.sh
|
|
A number of scripts used to build sets of modules. Each script builds an individual set.
|
|
Modules are built from the git sources and the build result is automatically appended to
|
|
TDE_DIR/0_logs/build_result.log.
|
|
Usage:
|
|
<dd>_<set_name>.sh [options] set_name
|
|
Options:
|
|
-s N: if specified, skip first N modules from the set of modules
|
|
|
|
The sets are logically grouped as "base system", "applications" and "others"
|
|
00_extradeps.sh : extra dependencies modules
|
|
01_base_01.sh - 03_base_03.sh : TDE base system
|
|
04_application_01.sh - 09_application_06.sh : application modules
|
|
10_others_01.sh - 11_others_02.sh : other modules that are somehow less used
|
|
91_build_base.sh : whole TDE base system in 00_extradeps.sh - 03_base_03.sh
|
|
92_build_applications.sh : all TDE applications in 04_application_01.sh - 09_application_06.sh
|
|
93_build_others.sh : all modules in 10_others_01.sh - 11_others_02.sh
|
|
|
|
- 99_build_TDE.sh
|
|
Script used to build the complete TDE at once. Calls the dd_setname.sh set scripts in order.
|
|
Usage:
|
|
build_TDE.sh
|
|
|
|
- create_repo.sh
|
|
Creates a local repository from the .deb files currently stored in TDE_DIR/2_build/debs.
|
|
Usage:
|
|
[sudo] create_repo.sh [options]
|
|
Options:
|
|
-b (Backup) : create a backup of the existing repository in TDE_DIR/CFG_REPO_DIR.backup
|
|
|
|
|
|
3) * Building hooks *
|
|
Hooks are available to execute ad-hoc code before and after the build process. For example this is very useful to automatically apply patches.
|
|
There are two type of hooks:
|
|
- pre_build : applied before switching the module to quilt format and build
|
|
- post_build: applied after the build (dpkg-buildpackage or pbuilder) has terminated
|
|
To use a hook, create an executable script (pre_build.sh and/or post_build.sh) in the TDE_DIR/1_git/hooks/<MODULE NAME> folder. The scripts are executed in the build_module.sh environment, so have access to all the variables defined in that file. See the files in the "hook examples" folder for real usage samples.
|
|
|
|
|
|
|
|
-------------------------
|
|
C) How to use the scripts
|
|
-------------------------
|
|
1) Follow the steps in section "A) Environment preparation" (only required the first time).
|
|
2) cd "TDE_DIR/buildscripts"
|
|
3) Update to latest git repository using
|
|
./update_repositories.sh
|
|
4) Run "sudo pbuilder update" at the beginning of the day to update the base package to the latest version. This will speed up
|
|
the process when building several modules in sequence.
|
|
5) Build modules as per your needs. You don't need to use "sudo" directly since the scripts will do that automatically if
|
|
required. Just type your sudo password when prompted to do so.
|
|
6) Create a local repository from the packages you have just built, to be used as installation repository.
|
|
[sudo] ./create_repo.sh
|
|
7) Install TDE as you usually do. For example as follow:
|
|
- sudo apt-get update
|
|
- sudo aptitude install tdebase-trinity (for a minimalistic TDE environment)
|
|
or
|
|
sudo aptitude install tde-trinity (for a standard TDE environment)
|
|
|
|
|
|
|
|
Examples of real usage:
|
|
|
|
1) build a single module
|
|
- ./build_module.sh -g -sl "dependencies/libr" -> build libr package. This is a good test to check
|
|
whether everything is working fine
|
|
- ./build_module.sh -g "tdelibs" -> build "tdelibs" from git sources in a clean chroot environment
|
|
- ./build_module.sh -g -l -sl "applications/amarok" -> build "amarok" locally from git sources and
|
|
display building logs during building
|
|
- ./build_module.sh -sh -lr "tdebase" -> build "tdebase" from the local sources (in TDE_DIR/2_build/build/tdebase)
|
|
in a clean chroot environment and launch a shell in case of building failure.
|
|
Append the build result (OK, FAILED) to TDE_DIR/scripts/logs/build_result.log
|
|
- ./build_module.sh -g -po "tdelibs" -> prepare "tdelibs" for building from git sources. Source code will be available
|
|
in TDE_DIR/2_build/build/tdelibs. After you have made changes to the source and
|
|
want to build the modified package, run './build_module.sh "tdelibs"'
|
|
|
|
2) build a single set
|
|
(optional) delete the TDE_DIR/0_logs/build_result.log file
|
|
./01_base_01.sh -> build this set.
|
|
./03_base_03.sh -s 3 -> build this set but skip the first 3 modules of the set.
|
|
|
|
3) build all TDE
|
|
./99_build_TDE.sh -> build all TDE
|
|
|
|
4) [sudo] ./create_repo.sh -> build or update your local TDE repository |