You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tdebase/doc/kcontrol/mouse/index.docbook

494 lines
20 KiB

<?xml version="1.0" ?>
<!DOCTYPE article PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN"
"dtd/kdex.dtd" [
<!ENTITY % addindex "IGNORE">
<!ENTITY % English "INCLUDE" > <!-- change language only here -->
]>
<article lang="&language;">
<articleinfo>
<authorgroup>
<author>&Mike.McBride; &Mike.McBride.mail;</author>
<author>&Brad.Hards; &Brad.Hards.mail;</author>
<!-- TRANS:ROLES_OF_TRANSLATORS -->
</authorgroup>
<date>2004-10-09</date>
<releaseinfo>3.03.00</releaseinfo>
<abstract>
<para>This is the documentation for the &tde; &kcontrol; module that configures mice and other pointing devices.
</para>
</abstract>
<keywordset>
<keyword>KDE</keyword>
<keyword>KControl</keyword>
<keyword>mouse</keyword>
</keywordset>
</articleinfo>
<sect1 id="mouse">
<title>Mouse</title>
<para>This module allows you to configure your pointing device. Your
pointing device may be a mouse, a track ball, a touch-pad, or another piece
of hardware that performs a similar function.</para>
<para>This module is divided into several tabs:
<link linkend="mouse-general">General</link>,
<link linkend="cursor-theme">Cursor Theme</link>,
<link linkend="mouse-advanced">Advanced</link> and
<link linkend="mouse-navigation">Mouse Navigation</link>.
There may also be one or more additional tabs if you have a Logitech mouse
or trackball, providing access to special features.
</para>
<sect2 id="mouse-general">
<title>General</title>
<variablelist>
<varlistentry>
<term><guilabel>Button Order</guilabel></term>
<listitem><para>
If you are left-handed, you may
prefer to swap the functions of the <mousebutton>left</mousebutton> and
<mousebutton>right</mousebutton> buttons on your pointing device by choosing the
<quote>Left handed</quote> option. If your pointing device has more than two
buttons, only those that function as the <mousebutton>left</mousebutton> and
<mousebutton>right</mousebutton> buttons are affected. For example, if you have
a three-button mouse, the <mousebutton>middle</mousebutton> button is
unaffected.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Reverse scroll direction</guilabel></term>
<listitem><para>
With this checkbox selected, the scroll wheel (if any) will work in the opposite direction (so that if rolling the top of the scroll wheel towards you previously causes a scroll down, then it will now cause a scroll up). This may be useful to handle a unusual setup of the X server.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Double-click to open files and folders (select icons on first click)</guilabel></term>
<listitem>
<para> If this option is not checked, icons/files will be opened with a
single click of the <mousebutton>left</mousebutton> mouse-button. This
default behavior is consistent with what you would expect when you click
links in most web browsers. If checked however, icons/files will be
opened with a double click, while a single click will only select the
icon or file. This is the behavior you may know from other desktops or
operating systems.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Single-click to open files and folders</guilabel></term>
<listitem>
<para>This is the default setting for &tde;. Clicking once on an icon
will open it. To select you can drag around the icon(s) or <keycombo
action="simul">&Ctrl;<mousebutton>Right</mousebutton></keycombo> click,
or simply click and hold to drag it. You can also enable automatic selection of icons using the <guilabel>Automatically select icons</guilabel> checkbox, discussed below.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Change pointer shape over icons</guilabel></term>
<listitem>
<para>When this option is checked, the shape of the mouse pointer
changes whenever it is over an icon.</para>
<tip><para>This option should be checked in most situations. It gives
more visual feedback and says, in essence, if you click here, something
will happen.</para></tip>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Automatically select icons</guilabel></term>
<listitem>
<para>
As noted above, if you have <guilabel>Single-click to open files and folders</guilabel> selected, you can select icons by dragging around them, or by using <keycombo
action="simul">&Ctrl;<mousebutton>Right</mousebutton></keycombo> click. If you routinely need to select icons, you may want to enable this checkbox, which will allow icons to be selected automatically by pausing over the icon. The <guilabel>Delay:</guilabel> slider determines how long is required before the automatic selection takes effect.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Visual feedback on activation</guilabel></term>
<listitem>
<para>When this option is
checked, &tde; gives you visual feedback whenever you click on something and activate it.</para></listitem>
</varlistentry>
</variablelist>
</sect2>
<sect2 id="cursor-theme">
<title>Cursor Theme</title>
<para>
This tab allows you to select from a number of cursor themes. A preview of the cursor display is shown above the listbox.
</para>
<note><para>The features provided by this tab may not be available on some systems. Your system may need to be updated to support cursor themes.
</para></note>
<para>
If you have additional cursor themes available to you, you can install and remove them using the buttons below the listbox. Note that you cannot remove the default themes.
</para>
</sect2>
<sect2 id="mouse-advanced">
<title>Advanced</title>
<variablelist>
<varlistentry>
<term id="peripherals-mouse-acceleration">
<guilabel>Pointer acceleration</guilabel></term>
<listitem>
<para>This option allows you to change the relationship
between the distance that the mouse pointer moves on the
screen and the relative movement of the physical device
itself (which may be a mouse, track-ball, or some other
pointing device.)</para>
<para>A high value for the acceleration multiplier will lead to large
movements of the mouse pointer on the screen, even when
you only make a small movement with the physical device.</para>
<tip><para>A multiplier between <guilabel>1x</guilabel> and
<guilabel>3x</guilabel> will works well for many systems. With a multiplier
over <guilabel>3x</guilabel> the mouse pointer may become difficult to
control.</para></tip>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Pointer threshold</guilabel></term>
<listitem>
<para>The threshold is the smallest distance that the mouse pointer must
move on the screen before acceleration has any effect. If the movement
is within the threshold, the mouse pointer moves as if the acceleration
were set to <guilabel>1x</guilabel>.</para>
<para>Thus, when you make small movements with the physical device (&eg;
mouse), you still have fine control of the mouse pointer on the screen,
whereas larger movements of the physical device will move the mouse
pointer rapidly to different areas on the screen.</para>
<para>You can set the threshold value by dragging the slider button or
by clicking the up/down arrows on the spin-button to the left of the
slider.</para>
<tip><para>In general, the higher you set the <guilabel>Pointer
acceleration</guilabel> value, the higher you will want to set the
<guilabel>Pointer threshold</guilabel> value. For example, A
<guilabel>Pointer threshold</guilabel> of 4 pixels may
be appropriate for a <guilabel>Pointer Acceleration</guilabel> of
2x, but 10 pixels might be
better for 3x.</para></tip>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Double click interval</guilabel></term>
<listitem>
<para>This is the maximum amount of time between clicks for &tde; to
register a double click. If you click twice, and the time between those
two clicks is less than this number, &tde; recognizes that as a double
click. If the time between these two clicks is greater than this
number, &tde; recognizes those as two <emphasis>separate</emphasis>
single clicks.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Drag start time</guilabel> and <guilabel>Drag start
distance</guilabel></term>
<listitem>
<para>If you
<itemizedlist>
<listitem><para>click with the mouse</para></listitem>
<listitem><para>drag within the time specified in <guilabel>Drag start
time</guilabel>, and </para></listitem>
<listitem><para>move a distance equal to or greater than the number (of
pixels) specified in <guilabel>Drag start distance</guilabel></para>
</listitem>
</itemizedlist>
&tde; will drag the selected item.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Mouse wheel scrolls by</guilabel></term>
<listitem>
<para>If you have a wheel mouse, use the slider to determine how many
lines of text one <quote>step</quote> of the mouse wheel will
scroll.</para>
</listitem>
</varlistentry>
</variablelist>
</sect2>
<sect2 id="mouse-navigation">
<title>Mouse Navigation</title>
<para>
This tab allows you to configure the keyboard number pad keys as a mouse-type device. This may be useful when you are working on a device without another pointing device, or where you have no other use for the number pad.
</para>
<variablelist>
<varlistentry>
<term><guilabel>Move pointer with keyboard (using the num pad)</guilabel></term>
<listitem>
<para>
To enable keyboard mouse mode, you need to select the checkbox labelled <guilabel>Move pointer with keyboard (using the num pad)</guilabel>. When you do this, the other settings will become enabled, and you can customize the keyboard pointer behavior further, if required.
</para>
<para>
The various keys on the number pad move in the direction you would expect. Note that you can move diagonally as well as up, down, left and right. The <keycap>5</keycap> key emulates a click to a pointer button, typically &LMB;. You change which button is emulated by using the <keycap>/</keycap> key (which makes it &LMB;), <keycap>*</keycap> key (which makes it &MMB;) and <keycap>-</keycap> (which makes it &RMB;). Using the <keycap>+</keycap> emulates a doubleclick to the selected pointer button. You can use the <keycap>0</keycap> key to emulate holding down the selected pointer button (for easy dragging), and then use the <keycap>.</keycap> to emulate releasing the selected pointer button.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Acceleration delay</guilabel></term>
<listitem>
<para>
This is the time (in milliseconds) between the initial key press and the first repeated motion event for mouse key acceleration.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Repeat interval</guilabel></term>
<listitem>
<para>
This is the time in milliseconds between repeated motion events for mouse key acceleration.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Acceleration time</guilabel></term>
<listitem>
<para>
This is the number of key events before the pointer reaches a maximum speed for mouse key acceleration.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Maximum speed</guilabel></term>
<listitem>
<para>
This is the maximum speed in pixels per key event the pointer can reach for mouse key acceleration.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><guilabel>Acceleration profile</guilabel></term>
<listitem>
<para>
This is the slope of the acceleration curve for mouse key acceleration.
</para>
</listitem>
</varlistentry>
</variablelist>
</sect2>
<sect2 id="logitech-mouse">
<title>Logitech Support</title>
<para>
Some Logitech USB mice support special features, such as switching to a higher resolution, or
providing cordless status. If KDE was built with libusb support, then you will get an additional
tab for each supported mouse that is plugged in.
</para>
<para>
The supported devices are:
</para>
<orderedlist>
<listitem><para>Wheel Mouse Optical</para></listitem>
<listitem><para>MouseMan Traveler</para></listitem>
<listitem><para>MouseMan Dual Optical</para></listitem>
<listitem><para>MX310 Optical Mouse</para></listitem>
<listitem><para>MX510 Optical Mouse</para></listitem>
<listitem><para>MX300 Optical Mouse</para></listitem>
<listitem><para>MX500 Optical Mouse</para></listitem>
<listitem><para>iFeel Mouse</para></listitem>
<listitem><para>Mouse Receiver</para></listitem>
<listitem><para>Dual Receiver</para></listitem>
<listitem><para>Cordless Freedom Optical</para></listitem>
<listitem><para>Cordless Elite Duo</para></listitem>
<listitem><para>MX700 Optical Mouse</para></listitem>
<listitem><para>Cordless Optical Trackman</para></listitem>
<listitem><para>Cordless MX Duo Receiver</para></listitem>
<listitem><para>MX100 Laser Mouse</para></listitem>
<listitem><para>Receiver for Cordless Presenter</para></listitem>
</orderedlist>
<para>
Not all devices support all capabilities (typically cordless devices do not
provide resolution switching, and of course only cordless devices support
cordless status reporting), so some parts of the tab will not be enabled for
some mouse types.
</para>
<para>
If the mouse supports resolution switching, the <guilabel>Sensor Resolution</guilabel>
radio button group will be enabled, and you can switch from <guilabel>400 counts per
inch</guilabel> to <guilabel>800 counts per inch</guilabel> and back. If you use
<guilabel>800 counts per inch</guilabel>, the same physical movement of the mouse
will cause a greater (roughly double) amount of motion of the cursor. This tends
to be popular amongst gamers.
</para>
<para>
If the mouse supports cordless reporting, the <guilabel>Battery Level</guilabel>
and <guilabel>RF Channel</guilabel> widgets will be enabled. You can only change
the <guilabel>RF Channel</guilabel> if your mouse has two channel support.
</para>
<sect3 id="logitech-perms">
<title>Fixing permission problems on Logitech mice</title>
<para>
Because of the way USB devices work, the code that accesses the current
status on Logitech mice needs to be able to write to the mouse. This
should be handled by your distribution, but if not, you may need to do some
configuration yourself.
</para>
<para>
On a Linux system, you should use the hotplug system to change the ownership
and permissions on the mouse entry in <filename>/proc/bus/usb</filename>. One
way to do this is to create a short script
(<filename>/etc/hotplug/usb/consoleUserPerms</filename>) that changes the ownership
and permissions, as shown below:
</para>
<informalexample>
<programlisting>
<![CDATA[
#!/bin/bash
#
# /etc/hotplug/usb/consoleUserPerms
#
# Sets up newly plugged in USB device so that the user who owns
# the console according to pam_console can access it from user space
#
# Note that for this script to work, you'll need all of the following:
# a) a line in the file /etc/hotplug/usb.usermap or another usermap file
# in /etc/hotplug/usb/ that corresponds to the device you are using.
# b) a setup using pam_console creates the respective lock files
# containing the name of the respective user. You can check for that
# by executing "echo `cat /var/{run,lock}/console.lock`" and
# verifying the appropriate user is mentioned somewhere there.
# c) a Linux kernel supporting hotplug and usbdevfs
# d) the hotplug package (http://linux-hotplug.sourceforge.net/)
#
# In the usermap file, the first field "usb module" should be named
# "consoleUserPerms" to invoke this script.
#
if [ "${ACTION}" = "add" ] && [ -f "${DEVICE}" ]
then
# New code, using lock files instead of copying /dev/console permissions
# This also works with non-tdm logins (e.g. on a virtual terminal)
# Idea and code from Nalin Dahyabhai <nalin@redhat.com>
if [ -f /var/run/console.lock ]
then
CONSOLEOWNER=`cat /var/run/console.lock`
elif [ -f /var/lock/console.lock ]
then
CONSOLEOWNER=`cat /var/lock/console.lock`
else
CONSOLEOWNER=
fi
if [ -n "$CONSOLEOWNER" ]
then
chmod 0000 "${DEVICE}"
chown "$CONSOLEOWNER" "${DEVICE}"
chmod 0600 "${DEVICE}"
fi
fi
]]>
</programlisting>
</informalexample>
<para>
The usermap file that goes with this is
<filename>/etc/hotplug/usb/logitechmouse.usermap</filename>, as
shown below:
</para>
<informalexample>
<programlisting>
<![CDATA[
# script match_flags idVendor idProduct bcdDevice_lo bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol bInterfaceClass bInterfaceSubClass bInterfaceProtocol driver_info
# Wheel Mouse Optical
consoleUserPerms 0x0003 0x046d 0xc00e 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# MouseMan Traveler
consoleUserPerms 0x0003 0x046d 0xc00f 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# MouseMan Dual Optical
consoleUserPerms 0x0003 0x046d 0xc012 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# MX310 Optical Mouse
consoleUserPerms 0x0003 0x046d 0xc01b 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# MX510 Optical Mouse
consoleUserPerms 0x0003 0x046d 0xc01d 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# MX300 Optical Mouse
consoleUserPerms 0x0003 0x046d 0xc024 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# MX500 Optical Mouse
consoleUserPerms 0x0003 0x046d 0xc025 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# iFeel Mouse
consoleUserPerms 0x0003 0x046d 0xc031 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Mouse Receiver
consoleUserPerms 0x0003 0x046d 0xc501 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Dual Receiver
consoleUserPerms 0x0003 0x046d 0xc502 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Cordless Freedom Optical
consoleUserPerms 0x0003 0x046d 0xc504 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Cordless Elite Duo
consoleUserPerms 0x0003 0x046d 0xc505 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# MX700 Optical Mouse
consoleUserPerms 0x0003 0x046d 0xc506 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Cordless Optical Trackman
consoleUserPerms 0x0003 0x046d 0xc508 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Cordless MX Duo Receiver
consoleUserPerms 0x0003 0x046d 0xc50b 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# MX100 Laser Mouse
consoleUserPerms 0x0003 0x046d 0xc50e 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
# Receiver for Cordless Presenter
consoleUserPerms 0x0003 0x046d 0xc702 0x0000 0xffff 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000
]]>
</programlisting>
</informalexample>
<para>
That should be all that is needed on Linux - just copy the files into
<filename>/etc/hotplug/usb/</filename>, and when the mouse is
plugged in, the ownership and permissions should be changed
so that the user at the console can access the mouse.
</para>
</sect3>
</sect2>
</sect1>
</article>