You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
README
Example Arts Modules -------------------- This directory contains example arts modules. The examples fall into several categories: 1. Effects which can be used as reusable building blocks (named effect_*.arts) 2. Standalone examples illustrating how to use each of the built-in arts modules (named example_*.arts). These typically send some output to a sound card. 3. Instruments built from lower level arts modules (named instrument_*.arts). These following a standard convention for input and output ports so they can be used by a (future) instrument manager. 4. Mixer elements used for creating mixers, including graphical controls (named mixer_element_*.arts). 5. Templates for creating new modules (names template_*.arts). 6. Miscellaneous modules that don't fit into any of the above categories. Detailed Description Of Each Module ----------------------------------- Examples -------- example_stereo_beep.arts Generates a 440Hz sine wave tone in the left channel and an 880Hz sine wave tone in the right channel, and sends it to the sound card output. This is referenced in the aRts documentation. example_sine.arts Generates a 440 Hz sine wave. example_pulse.arts Generates a 440 Hz pulse wave with a 20% duty cycle. example_softsaw.arts Generates a 440 Hz sawtooth wave. example_square.arts Generates a 440 Hz square wave. example_tri.arts Generates a 440 Hz triangle wave. example_noise.arts Generates white noise. example_dtmf1.arts Generates a dual tone by producing 697 and 1209 Hz sine waves, scaling them by 0.5, and adding them together. This is the DTMF tone for the digit "1" on a telephone keypad. example_atan_saturate.arts Runs a triangle wave through the atan saturate filter. example_autopanner.arts Uses an autopanner to pan a 400 Hz sine wave between the left and right speakers at a 2 Hz rate. example_brickwall.arts Scales a sine wave by a factor of 5 and then runs it through a brickwall limiter. example_bus.arts Downlinks from a bus called "Bus" and uplinks to the bus "out_soundcard" with the left and right channels reversed. example_cdelay.arts Downlinks from a bus called "Delay", uplinks the right channel through a 0.5 second cdelay, and the left channel unchanged. You can use artscontrol to connect the effect to a sound player and observe the results. example_delay.arts This is the same as example_cdelay but used the delay effect. example_capture_wav.arts This uses the Synth_CAPTURE_WAV to save a 400 Hz sine wave as a wav file. Run the module for a few seconds, and then examine the file created in /tmp. You can play the file with a player such as kaiman. example_data.arts This uses the Data module to generate a constant stream of the value "3" and sends it to a Debug module to periodically display it. It also contains a Nil module, illustrating how it can be used to do nothing at all. example_adsr.arts Shows how to create a simple instrument sound using the Envelope Adsr module, repetitively triggered by a square wave. example_fm.arts This uses the FM Source module to generate a 440 Hz sine wave which is frequency modulated at a 5 Hz rate. example_freeverb.arts This connects the Freeverb effect from a bus downlink to a bus outlink. You can use artscontrol to connect the effect to a sound player and observe the results. example_flanger.arts This implements a simple flanger effect (it doesn't appear to work yet, though). example_moog.arts This structure combines the two channels from a bus into one, passes it though the Moog VCF filter, and sends it out the out_soundcard bus. example_pitch_shift.arts This structure passes the left channel of sound card data through the Pitch Shift effect. Adjust the speed parameter to vary the effect. example_rc.arts This structure passes a white noise generator though an RC filter and out to the sound card. By viewing the FFT Scope display in artscontrol you can see how this varies from an unfiltered noise waveform. example_sequence.arts This demonstrates the Sequence module by playing a sequence of notes. example_shelve_cutoff.arts This structure passes a white noise generator though a Shelve Cutoff filter and out to the sound card. By viewing the FFT Scope display in artscontrol you can see how this varies from an unfiltered noise waveform. example_equalizer.arts This demonstrates the Std_Equalizer module. It boosts the low and high frequencies by 6 dB. example_tremolo.arts This demonstrates the Tremolo effect. It modulates the left and right channels using a 10 Hz tremolo. example_xfade.arts This example mixes 440 and 880 Hz sine waves using a cross fader. Adjust the value of the cross fader's percentage input from -1 to 1 to control the mixing of the two Q_SIGNALS. example_pscale.arts This illustrates the Pscale module (I'm not sure if this is a meaningful example). example_play_wav.arts This illustrates the Play Wave module. You will need to enter the full path to a .wav file as the filename parameter. example_multi_add.arts This shows the Multi Add module which accepts any number of inputs. It sums three Data modules which produce inputs of 1, 2, and 3, and displays the result 6. Instruments ----------- instrument_flexible_slide.arts instrument_flexible_slide_GUI.arts instrument_fm_horn.arts instrument_full_square.arts instrument_moog_vcf_tune.arts instrument_moog_vcf_tune_GUI.arts instrument_neworgan.arts instrument_nokind.arts instrument_organ2.arts instrument_simple_sin.arts instrument_simple_square.arts instrument_simple_tri.arts instrument_slide.arts instrument_slide1.arts instrument_square.arts instrument_tri.arts Effects ------- effect_delay.arts effect_delay_alone.arts effect_flanger_alone.arts Templates --------- template_Empty_Structure.arts template_Instrument.arts template_Instrument_GUI.arts template_Mixer_Element.arts Mixer Elements -------------- mixer_element_simple.arts mixer_element_eq.arts mixer_element_eqfx.arts