You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tdemultimedia/xine_artsplugin/configure.in.in

258 lines
10 KiB

dnl Configure paths for XINE
dnl
dnl Copyright (C) 2001 Daniel Caujolle-Bert <segfault@club-internet.fr>
dnl
dnl This program is free software; you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
dnl the Free Software Foundation; either version 2 of the License, or
dnl (at your option) any later version.
dnl
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
dnl GNU General Public License for more details.
dnl
dnl You should have received a copy of the GNU General Public License
dnl along with this program; if not, write to the Free Software
dnl Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
dnl
dnl
dnl As a special exception to the GNU General Public License, if you
dnl distribute this file as part of a program that contains a configuration
dnl script generated by Autoconf, you may include it under the same
dnl distribution terms that you use for the rest of that program.
dnl
if test "x$build_arts" = "xno"; then
DO_NOT_COMPILE="$DO_NOT_COMPILE xine_artsplugin"
fi
dnl AC_PATH_XINE([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND ]]])
dnl Test for XINE, and define XINE_CFLAGS and XINE_LIBS
dnl
AC_DEFUN([AC_PATH_XINE],
[dnl
dnl Get the cflags and libraries from the xine-config script
dnl
AC_ARG_WITH(xine-prefix,
[ --with-xine-prefix=PFX Prefix where XINE is installed (optional)],
xine_config_prefix="$withval", xine_config_prefix="")
AC_ARG_WITH(xine-exec-prefix,
[ --with-xine-exec-prefix=PFX Exec prefix where XINE is installed (optional)],
xine_config_exec_prefix="$withval", xine_config_exec_prefix="")
AC_ARG_ENABLE(xinetest,
[ --disable-xinetest Do not try to compile and run a test XINE program],, enable_xinetest=yes)
if test x$xine_config_exec_prefix != x ; then
xine_config_args="$xine_config_args --exec-prefix=$xine_config_exec_prefix"
if test x${XINE_CONFIG+set} != xset ; then
XINE_CONFIG=$xine_config_exec_prefix/bin/xine-config
fi
fi
if test x$xine_config_prefix != x ; then
xine_config_args="$xine_config_args --prefix=$xine_config_prefix"
if test x${XINE_CONFIG+set} != xset ; then
XINE_CONFIG=$xine_config_prefix/bin/xine-config
fi
fi
min_xine_version=ifelse([$1], ,0.5.0,$1)
if test "x$enable_xinetest" != "xyes" ; then
AC_MSG_CHECKING([for XINE-LIB version >= $min_xine_version])
else
AC_PATH_PROG(XINE_CONFIG, xine-config, no)
AC_MSG_CHECKING([for XINE-LIB version >= $min_xine_version])
no_xine=""
if test "$XINE_CONFIG" = "no" ; then
no_xine=yes
else
XINE_CFLAGS=`$XINE_CONFIG $xine_config_args --cflags`
XINE_LIBS=`$XINE_CONFIG $xine_config_args --libs`
xine_config_major_version=`$XINE_CONFIG $xine_config_args --version | \
sed -n 's/^\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\).*$/\1/p'`
xine_config_minor_version=`$XINE_CONFIG $xine_config_args --version | \
sed -n 's/^\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\).*$/\2/p'`
xine_config_sub_version=`$XINE_CONFIG $xine_config_args --version | \
sed -n 's/^\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\).*$/\3/p'`
xine_script_dir=`$XINE_CONFIG $xine_config_args --scriptdir`
xine_plugin_dir=`$XINE_CONFIG $xine_config_args --plugindir`
xine_locale_dir=`$XINE_CONFIG $xine_config_args --localedir`
dnl if test "x$enable_xinetest" = "xyes" ; then
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $XINE_CFLAGS $all_includes"
LIBS="$XINE_LIBS $LIBS $all_libraries"
dnl
dnl Now check if the installed XINE is sufficiently new. (Also sanity
dnl checks the results of xine-config to some extent
dnl
AC_LANG_SAVE()
AC_LANG_C()
rm -f conf.xinetest
AC_TRY_RUN([
#include <xine.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int
main ()
{
int major, minor, sub;
char *tmp_version;
system ("touch conf.xinetest");
/* HP/UX 9 (%@#!) writes to sscanf strings */
tmp_version = (char *) strdup("$min_xine_version");
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &sub) != 3) {
printf("%s, bad version string\n", "$min_xine_version");
exit(1);
}
if ((XINE_MAJOR_VERSION != $xine_config_major_version) ||
(XINE_MINOR_VERSION != $xine_config_minor_version) ||
(XINE_SUB_VERSION != $xine_config_sub_version))
{
printf("\n*** 'xine-config --version' returned %d.%d.%d, but XINE (%d.%d.%d)\n",
$xine_config_major_version, $xine_config_minor_version, $xine_config_sub_version,
XINE_MAJOR_VERSION, XINE_MINOR_VERSION, XINE_SUB_VERSION);
printf ("*** was found! If xine-config was correct, then it is best\n");
printf ("*** to remove the old version of XINE. You may also be able to fix the error\n");
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
printf("*** required on your system.\n");
printf("*** If xine-config was wrong, set the environment variable XINE_CONFIG\n");
printf("*** to point to the correct copy of xine-config, and remove the file config.cache\n");
printf("*** before re-running configure\n");
}
else
{
if ((XINE_MAJOR_VERSION > major) ||
((XINE_MAJOR_VERSION == major) && (XINE_MINOR_VERSION > minor)) ||
((XINE_MAJOR_VERSION == major) && (XINE_MINOR_VERSION == minor) && (XINE_SUB_VERSION >= sub)))
{
return 0;
}
else
{
printf("\n*** An old version of XINE (%d.%d.%d) was found.\n",
XINE_MAJOR_VERSION, XINE_MINOR_VERSION, XINE_SUB_VERSION);
printf("*** You need a version of XINE newer than %d.%d.%d. The latest version of\n",
major, minor, sub);
printf("*** XINE is always available from:\n");
printf("*** http://xine.sourceforge.net\n");
printf("***\n");
printf("*** If you have already installed a sufficiently new version, this error\n");
printf("*** probably means that the wrong copy of the xine-config shell script is\n");
printf("*** being found. The easiest way to fix this is to remove the old version\n");
printf("*** of XINE, but you can also set the XINE_CONFIG environment to point to the\n");
printf("*** correct copy of xine-config. (In this case, you will have to\n");
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
printf("*** so that the correct libraries are found at run-time))\n");
}
}
return 1;
}
],, no_xine=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_xine" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$XINE_CONFIG" = "no" ; then
echo "*** The xine-config script installed by XINE could not be found"
echo "*** If XINE was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the XINE_CONFIG environment variable to the"
echo "*** full path to xine-config."
else
if test -f conf.xinetest ; then
:
else
echo "*** Could not run XINE test program, checking why..."
CFLAGS="$CFLAGS $XINE_CFLAGS"
LIBS="$LIBS $XINE_LIBS"
AC_TRY_LINK([
#include <xine.h>
#include <stdio.h>
], [ return ((XINE_MAJOR_VERSION) || (XINE_MINOR_VERSION) || (XINE_SUB_VERSION)); ],
[ echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding XINE or finding the wrong"
echo "*** version of XINE. If it is not finding XINE, you'll need to set your"
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
echo "*** to the installed location Also, make sure you have run ldconfig if that"
echo "*** is required on your system"
echo "***"
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
echo "***"],
[ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means XINE was incorrectly installed"
echo "*** or that you have moved XINE since it was installed. In the latter case, you"
echo "*** may want to edit the xine-config script: $XINE_CONFIG" ])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
XINE_CFLAGS=""
XINE_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(XINE_CFLAGS)
AC_SUBST(XINE_LIBS)
AC_LANG_RESTORE()
rm -f conf.xinetest
dnl Make sure HAVE_STRSEP, HAVE_SETENV and HAVE_STRPBRK are defined as
dnl necessary.
AC_CHECK_FUNCS([strsep strpbrk setenv])
])
dnl Check for XShmGetEventBase
AC_MSG_CHECKING([for XShmGetEventBase])
AC_LANG_SAVE()
AC_LANG_CPLUSPLUS()
AC_TRY_COMPILE([
#include <X11/Xlib.h>
#include <X11/extensions/XShm.h>
],[
static Display *display = NULL;
int shmCompletionType = XShmGetEventBase( display );
],[
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_XSHMGETEVENTBASE, 1, [Define if you have XShmGetEventBase in <X11/extensions/XShm.h])
],[
AC_MSG_RESULT(no)
]
)
AC_LANG_RESTORE()
dnl Check for new internal xine symbol names
KDE_CHECK_LIB(xine, ao_new_port, :,
[
AC_DEFINE(ao_new_port, _x_ao_new_port, [Compatibility with newer versions of xine])
])
AC_CHECK_FUNC([_x_ao_new_port])
AC_ARG_WITH([xine],
[AC_HELP_STRING([--with-xine],
[Enable support for Xine @<:@default=check@:>@])],
[], with_xine=check)
have_xine=no
if test "x$with_xine" != xno; then
AC_PATH_XINE(1.0.0, have_xine=yes)
if test "x$with_xine" != xcheck && test "x$have_xine" != xyes; then
AC_MSG_ERROR([--with-xine was given, but test for Xine failed])
fi
fi
if test "x$have_xine" != xyes; then
DO_NOT_COMPILE="$DO_NOT_COMPILE xine_artsplugin"
fi