You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tdepim/doc/kleopatra/index.docbook

1459 lines
54 KiB

<?xml version="1.0" ?>
<!DOCTYPE book PUBLIC "-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN" "dtd/kdex.dtd" [
<!ENTITY kleopatra "<application>Kleopatra</application>">
<!ENTITY kwatchgnupg "<application>KWatchGnuPG</application>">
<!ENTITY gpgsm "<application>GpgSM</application>">
<!ENTITY gpg "<application>GPG</application>">
<!ENTITY gpgconf "<application>GpgConf</application>">
<!ENTITY kappname "&kleopatra;">
<!ENTITY package "kdepim">
<!ENTITY smime "<acronym>S/MIME</acronym>">
<!ENTITY % addindex "IGNORE">
<!ENTITY % English "INCLUDE">
<!ENTITY dn "<acronym>DN</acronym>">
<!ENTITY ca "<acronym>CA</acronym>">
<!-- Expanded all entities to make them translatable - lueck
FILE menu
<!ENTITY file-new-key-pair "<menuchoice><guimenu>File</guimenu><guimenuitem>New Key Pair...</guimenuitem></menuchoice>">
<!ENTITY file-export-certificates "<menuchoice><guimenu>File</guimenu><guimenuitem>Export Certificates...</guimenuitem></menuchoice>">
<!ENTITY file-export-secret-key "<menuchoice><guimenu>File</guimenu><guimenuitem>Export Secret key...</guimenuitem></menuchoice>">
<!ENTITY file-import-certificates "<menuchoice><guimenu>File</guimenu><guimenuitem>Import Certificates...</guimenuitem></menuchoice>">
<!ENTITY file-import-crls "<menuchoice><guimenu>File</guimenu><guimenuitem>Import CRLs...</guimenuitem></menuchoice>">
<!ENTITY file-quit "<menuchoice><shortcut><keycombo action="simul">&Ctrl;<keycap>Q</keycap></keycombo></shortcut><guimenu>File</guimenu><guimenuitem>Quit</guimenuitem></menuchoice>">
VIEW menu
<!ENTITY view-redisplay "<menuchoice><shortcut><keycombo action="simul"><keycap>F5</keycap></keycombo></shortcut><guimenu>View</guimenu><guimenuitem>Redisplay</guimenuitem></menuchoice>">
<!ENTITY view-stop-operation "<menuchoice><shortcut><keycombo action="simul"><keycap>Esc</keycap></keycombo></shortcut><guimenu>View</guimenu><guimenuitem>Stop Operation</guimenuitem></menuchoice>">
<!ENTITY view-certificate-details "<menuchoice><guimenu>View</guimenu><guimenuitem>Certificate Details...</guimenuitem></menuchoice>">
<!ENTITY view-hierarchical-key-list "<menuchoice><guimenu>View</guimenu><guimenuitem>Hierarchical Key List</guimenuitem></menuchoice>">
<!ENTITY view-expand-all "<menuchoice><shortcut><keycombo action="simul">&Ctrl;<keycap>.</keycap></keycombo></shortcut><guimenu>View</guimenu><guimenuitem>Expand All</guimenuitem></menuchoice>">
<!ENTITY view-collapse-all "<menuchoice><shortcut><keycombo action="simul">&Ctrl;<keycap>,</keycap></keycombo></shortcut><guimenu>View</guimenu><guimenuitem>Collapse All</guimenuitem></menuchoice>">
CERTIFICATES menu
<!ENTITY certificates-validate "<menuchoice><shortcut><keycombo action="simul">&Shift;<keycap>F5</keycap></keycombo></shortcut><guimenu>Certificates</guimenu><guimenuitem>Validate</guimenuitem></menuchoice>">
<!ENTITY certificates-refresh-crls "<menuchoice><guimenu>Certificates</guimenu><guimenuitem>Refresh CRLs</guimenuitem></menuchoice>">
<!ENTITY certificates-delete "<menuchoice><shortcut><keycombo action="simul"><keycap>Delete</keycap></keycombo></shortcut><guimenu>Certificates</guimenu><guimenuitem>Delete</guimenuitem></menuchoice>">
<!ENTITY certificates-download "<menuchoice><guimenu>Certificates</guimenu><guimenuitem>Download</guimenuitem></menuchoice>">
CRLS menu
<!ENTITY crls-clear-crl-cache "<menuchoice><guimenu>CRLs</guimenu><guimenuitem>Clear CRL Cache...</guimenuitem></menuchoice>">
<!ENTITY crls-dump-crl-cache "<menuchoice><guimenu>CRLs</guimenu><guimenuitem>Dump CRL Cache...</guimenuitem></menuchoice>">
TOOLS menu
<!ENTITY tools-gnupg-log-viewer "<menuchoice><guimenu>Tools</guimenu><guimenuitem>GnuPG Log Viewer...</guimenuitem></menuchoice>">
SETTINGS menu
<!ENTITY settings-show-statusbar "<menuchoice><guimenu>Settings</guimenu><guimenuitem>Show Statusbar</guimenuitem></menuchoice>">
<!ENTITY settings-configure-shortcuts "<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure Shortcuts...</guimenuitem></menuchoice>">
<!ENTITY settings-configure-kleopatra "<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure &kleopatra;...</guimenuitem></menuchoice>">
<!ENTITY settings-configure-gpgme-backend "<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure GpgME Backend...</guimenuitem></menuchoice>">
-->
<!-- Command line options -->
<!ENTITY commandline-option-external "<option>--external</option>">
<!ENTITY commandline-option-query "<option>--query</option>">
<!ENTITY commandline-option-import-certificate "<option>--import-certificate</option>">
]>
<book lang="&language;">
<bookinfo>
<title>The &kleopatra; Handbook</title>
<authorgroup>
<author>
<firstname>Marc</firstname>
<surname>Mutz</surname>
<affiliation>
<address><email>marc@klaralvdalens-datakonsult.se</email></address>
</affiliation>
</author>
<othercredit role="developer">
<firstname>David</firstname>
<surname>Faure</surname>
<contrib>Developer</contrib>
</othercredit>
<othercredit role="developer">
<firstname>Steffen</firstname>
<surname>Hansen</surname>
<affiliation>
<address>&Steffen.Hansen.mail;</address>
</affiliation>
<contrib>Developer</contrib>
</othercredit>
<othercredit role="developer">
<firstname>Matthias Kalle</firstname>
<surname>Dalheimer</surname>
<contrib>Developer</contrib>
</othercredit>
<othercredit role="developer">
<firstname>Jesper</firstname>
<surname>Pedersen</surname>
<affiliation>
<address>&Jesper.Pedersen.mail;</address>
</affiliation>
<contrib>Developer</contrib>
</othercredit>
<othercredit role="developer">
<firstname>Daniel</firstname>
<surname>Molkentin</surname>
<affiliation>
<address>&Daniel.Molkentin.mail;</address>
</affiliation>
<contrib>Developer</contrib>
</othercredit>
<!-- TRANS:ROLES_OF_TRANSLATORS -->
</authorgroup>
<legalnotice>&GPLNotice;</legalnotice>
<date>2004-06-11</date>
<releaseinfo>0.31</releaseinfo>
<abstract>
<para>
&kleopatra; is a tool for managing X.509 certificates.
</para>
</abstract>
<keywordset>
<keyword>KDE</keyword>
<keyword>Kapp</keyword>
<keyword>X509</keyword>
<keyword>LDAP</keyword>
<keyword>gpg</keyword>
<keyword>gpgsm</keyword>
</keywordset>
</bookinfo>
<chapter id="introduction"> <title>Introduction</title>
<para>&kleopatra; is the &kde; tool for managing X.509 certificates in
the &gpgsm; keybox and for retrieving certificates from
<acronym>LDAP</acronym> servers.</para>
<para>&kleopatra; can be started from &kmail;'s <guimenu>Tools</guimenu>
menu, as well as from the command line. The &kleopatra; executable is
named <userinput><command>kleopatra</command></userinput>.</para>
<note><para>This program is named after Cleopatra, a famous female
Egyptian pharaoh that lived at the time of Julius Caesar, whom she is
said to have had an intimate relationship with.</para>
<para>The name was chosen since this program originates from the
<ulink url="http://www.gnupg.org/aegypten2/">&Auml;gypten
Projects</ulink> (&Auml;gypten is German for Egypt). Kleopatra is the
German spelling of Cleopatra.</para></note>
</chapter>
<chapter id="functions"><title>Main Functions</title>
<sect1 id="functions-view"><title>Viewing the Local Keybox</title>
<!-- Viewing and Refreshing, also Validation -->
<para>&kleopatra;'s main function is to display and edit the contents
of the local keybox, which is similar to &gpg;'s concept of keyrings,
albeit one should not stretch this analogy too much.</para>
<para>The main window is divided into the large key listing area, the
menubar and the <link linkend="functions-search">search bar</link> on
top, and a status bar at the bottom.</para>
<para>Each line in the key list corresponds to one certificate,
identified by the so-called <guilabel>Subject &dn;</guilabel>. &dn; is
an acronym for <quote>Distinguished Name</quote>, a hierarchical
identifier, much like a file system path with an unusual syntax, that is
supposed to globally uniquely identify a given certificate.</para>
<para>To be valid, and thus usable, (public) keys need to be signed by
a &ca; (Certification Authority). These signatures are called
certificates, but usually the terms <quote>certificate</quote> and
<quote>(public) key</quote> are used interchangeably, and we will not
distinguish between them in this manual either, except when explicitly
noted. The name of the &ca; which issued the certificate (its &dn;)
is shown in the <guilabel>Issuer &dn;</guilabel> column.</para>
<para>&ca;s must in turn be signed by other &ca;s to be valid. Of
course, this must end somewhere, so the top-level &ca; (root-&ca;)
signs its key with itself (this is called a self-signature). Root
certificates thus need to be assigned validity (commonly called trust)
manually, &eg; after comparing the fingerprint with the one on the
website of the &ca;. This is typically done by the system administrator or
the vendor of a product using certificates, but can be done by the
user via &gpgsm;'s command line interface.</para>
<para>To see which of the certificates are root certificates, you can
either compare <guilabel>Subject &dn;</guilabel> and <guilabel>Issuer
&dn;</guilabel>, or you switch to hierarchical keylist mode with <link
linkend="view-hierarchical-key-list"><menuchoice><guimenu>View</guimenu>
<guimenuitem>Hierarchical Key List</guimenuitem></menuchoice></link>.</para>
<para>You can see the details of any certificate by double-clicking it
or using <link linkend="view-certificate-details"><menuchoice><guimenu>View</guimenu>
<guimenuitem>Certificate Details...</guimenuitem></menuchoice></link>. This opens a
dialog that shows the most common properties of the certificate, its
certificate chain (&ie; the chain of issuers up to the root-&ca;), and
a dump of all information the backend is able to extract from the
certificate.</para>
<para>If you change the keybox without using &kleopatra; (&eg; using
&gpgsm;'s command line interface), you can refresh the view with <link
linkend="view-redisplay"><menuchoice><shortcut><keycombo action="simul">
<keycap>F5</keycap></keycombo></shortcut><guimenu>View</guimenu>
<guimenuitem>Redisplay</guimenuitem></menuchoice></link>.</para>
<para>Since validating a key may take some time (&eg; CRLs might need
to be fetched), the normal keylisting does not attempt to check the
validity of keys. For this, <link linkend="certificates-validate">
<menuchoice><shortcut><keycombo action="simul">&Shift;<keycap>F5</keycap></keycombo>
</shortcut><guimenu>Certificates</guimenu><guimenuitem>Validate</guimenuitem></menuchoice></link>, a
special variant of <link
linkend="view-redisplay"><menuchoice><shortcut><keycombo action="simul">
<keycap>F5</keycap></keycombo></shortcut><guimenu>View</guimenu>
<guimenuitem>Redisplay</guimenuitem></menuchoice></link>, is provided. It
either checks the selected certificates, or all keys if none are
selected.</para>
</sect1>
<sect1 id="functions-search"><title>Searching and Importing Certificates</title>
<para>Most of the time, you will acquire new certificates by verifying
signatures in emails, since certificates are embedded in the
signatures made using them most of the time. However, if you need to
send a mail to someone you have not yet had contact with, you need to
fetch the certificate from an LDAP directory (although &gpgsm; can do
this automatically), or from a file. You also need to import your own
certificate after receiving the &ca; answer to your certification
request.</para>
<para>To search for a certificate in an LDAP directory, switch the
dropdown menu of the search bar from <guilabel>in Local
Certificates</guilabel> to <guilabel>in External
Certificates</guilabel>, enter some text (&eg; the name of the person
you want the certificate for) into the line edit, and click on the
<guilabel>Find</guilabel> icon. The results will be displayed in the
key list below the search bar, where you can select certificates to
either look at them with <link linkend="view-certificate-details">
<menuchoice><guimenu>View</guimenu><guimenuitem>Certificate Details...</guimenuitem></menuchoice></link> or
download them with <link linkend="certificates-download">
<menuchoice><guimenu>Certificates</guimenu><guimenuitem>Download</guimenuitem></menuchoice></link> into the
local keybox. Note that you can also download the certificate from the
details dialog, using the <guilabel>Import to Local</guilabel>
button.</para>
<para>You can configure the list of LDAP servers to search in the
<link linkend="configuration-directory-services"><guilabel>Directory
Services</guilabel></link> page of &kleopatra;'s <link
linkend="configuration">configure dialog</link>.</para>
<para>If you received the certificate as a file, try <link
linkend="file-import-certificates"><menuchoice><guimenu>File</guimenu>
<guimenuitem>Import Certificates...</guimenuitem></menuchoice></link>. &gpgsm; needs to understand the
format of the certificate file; please refer to &gpgsm;'s manual for a
list of supported file formats.</para>
<para>If you did not <link linkend="functions-newkey">create your
keypair with &gpgsm;</link>, you also need to manually import the
public key (as well as the secret key) from the PKCS#12 file you got from
the &ca;. You can do this on the command line with <link
linkend="commandline-option-import-certificate"><userinput><command>kleopatra
&commandline-option-import-certificate;
<filename>filename</filename></command></userinput></link> or from
within &kleopatra; with <link
linkend="file-import-certificates"><menuchoice><guimenu>File</guimenu>
<guimenuitem>Import Certificates...</guimenuitem></menuchoice></link>,
just as you would to for <quote>normal</quote> certificates.</para>
</sect1>
<sect1 id="functions-newkey"><title>Creating New Key Pairs</title>
<para>The menu item <link linkend="file-new-key-pair"><menuchoice>
<guimenu>File</guimenu><guimenuitem>New Key Pair...</guimenuitem></menuchoice></link> starts the
certificate-request-creating wizard which will guide you through a
number of steps to create a certificate request; this request can, on the
last page of the wizard, either be sent to a certificate authority (&ca;)
to be signed or saved to a file (for example to a floppy, so it can be
shipped to the &ca;).</para> <para>Whenever you are done with a step in
the wizard, press <guibutton>Next</guibutton> to go to the next step
(or <guibutton>Back</guibutton> to review steps that are already
completed). The certificate request creation can be canceled at any
time by pressing the <guibutton>Cancel</guibutton> button.
</para>
<para>The first step in the wizard is to type in your personal data
for the certificate. The fields to fill out are:
<itemizedlist>
<listitem>
<para><guilabel>Name:</guilabel> Your name;</para>
</listitem>
<listitem>
<para><guilabel>Location:</guilabel>The town or city in which you live;</para>
</listitem>
<listitem>
<para><guilabel>Organization:</guilabel>The organization you represent
(for example, the company you work for);</para>
</listitem>
<listitem>
<para><guilabel>Department:</guilabel>The organizational unit you are
in (for example, "Logistics");</para>
</listitem>
<listitem>
<para><guilabel>Country code:</guilabel>The two letter code for the
country in which you are living (for example, "US");</para>
</listitem>
<listitem>
<para><guilabel>Email address:</guilabel>Your email address; be sure
to type this in correctly&mdash;this will be the address people will be
sending mail to when they use your certificate.</para>
</listitem>
</itemizedlist>
</para><para>
The next step in the wizard is to select whether to store the
certificate in a file or send it directly to a &ca;. You will have to
specify the filename or email address to send the certificate request to.
</para></sect1>
<sect1 id="functions-keybox-management"><title>Keybox Management</title>
<para>In addition to <link linkend="functions-view">list and
validate</link>, <link linkend="functions-search">search and
import</link> certificates and <link
linkend="functions-newkey">creating new ones</link>, &kleopatra; also
has some less often used functions that help you manage your local
keybox.</para>
<para>These functions include deleting certificates from the local
keybox with <link linkend="certificates-delete"><menuchoice><shortcut>
<keycombo action="simul"><keycap>Delete</keycap></keycombo></shortcut>
<guimenu>Certificates</guimenu><guimenuitem>Delete</guimenuitem></menuchoice></link>, as well
as manual handling of CRLs (<link linkend="certificates-refresh-crls">
<menuchoice><guimenu>Certificates</guimenu><guimenuitem>Refresh CRLs</guimenuitem>
</menuchoice></link>, <link linkend="crls-clear-crl-cache"><menuchoice><guimenu>CRLs</guimenu>
<guimenuitem>Clear CRL Cache...</guimenuitem></menuchoice></link>, <link
linkend="crls-dump-crl-cache"><menuchoice><guimenu>CRLs</guimenu>
<guimenuitem>Dump CRL Cache...</guimenuitem></menuchoice></link>).</para>
</sect1>
</chapter>
<chapter id="menu"><title>Menu Reference</title>
<sect1 id="menufile"><title>File Menu</title>
<variablelist>
<varlistentry id="file-new-key-pair">
<term><menuchoice><guimenu>File</guimenu><guimenuitem>New Key Pair...</guimenuitem></menuchoice></term>
<listitem>
<para><action>Creates a new key pair (public and private)</action> and
allows to send the public part to a certification authority
(&ca;) for signing. The resulting certificate is then
sent back to you, or stored in an LDAP server for you to download into
your local keybox, where you can use it to sign and decrypt
mails.</para>
<para>This mode of operation is called <quote>decentralized key
generation</quote>, since all keys are created locally. &kleopatra;
(and &gpgsm;) do not support <quote>centralized key generation</quote>
directly, but you can import the public/secret key bundle that you
receive from the &ca; in PKCS#12 format via <menuchoice><guimenu>File</guimenu>
<guimenuitem>Import Certificates...</guimenuitem></menuchoice>.</para>
</listitem>
</varlistentry>
<varlistentry id="file-export-certificates">
<term><menuchoice><guimenu>File</guimenu><guimenuitem>Export Certificates...</guimenuitem></menuchoice></term>
<listitem>
<para><action>Exports the selected certificates</action> into a file.</para>
<note><para>This exports only the public keys, even if the
secret key is available. Use <menuchoice><guimenu>File</guimenu><guimenuitem>Export
Secret key...</guimenuitem></menuchoice> to export both
public and secret keys into a file, but note that this is almost
always a bad idea.</para></note>
</listitem>
</varlistentry>
<varlistentry id="file-export-secret-key">
<term><menuchoice><guimenu>File</guimenu><guimenuitem>Export Secret key...</guimenuitem></menuchoice></term>
<listitem>
<para><action>Exports both the public and the secret key to a
(PKCS#12) file.</action></para>
<warning><para>It should rarely be necessary to use this function, and
if it is, it should be carefully planned. Planning the migration of a
secret key involves choice of transport media and secure deletion of
the key data on the old machine, as well as the transport medium,
among other things.</para></warning>
</listitem>
</varlistentry>
<varlistentry id="file-import-certificates">
<term><menuchoice><guimenu>File</guimenu><guimenuitem>Import Certificates...</guimenuitem></menuchoice></term>
<listitem>
<para><action>Imports certificates and/or secret keys from files into
the local keybox.</action></para>
<para>The format of the certificate file must be supported by
&gpgsm;. Please refer to the &gpgsm; manual for a list of supported
formats.</para>
</listitem>
</varlistentry>
<varlistentry id="file-import-crls">
<term><menuchoice><guimenu>File</guimenu><guimenuitem>Import CRLs...</guimenuitem></menuchoice></term>
<listitem>
<para><action>Lets you manually import CRLs from
files.</action></para>
<para>Normally, Certificate Revocation Lists (CRLs) are handled
transparently by the backend, but it can sometimes be useful to
import a CRL manually into the local CRL cache.</para>
<note><para>For CRL import to work, the
<application>dirmngr</application> tool must be in the search
<varname>PATH</varname>. If this menu item is disabled, you should
contact the system administrator and ask them to install
<application>dirmngr</application>.</para></note>
<para>You can view the contents of the local CRL cache from the menu
item <menuchoice><guimenu>CRLs</guimenu><guimenuitem>Dump CRL Cache...</guimenuitem>
</menuchoice>. This will display a dialog with
information about the CRLs in the cache and the fingerprints of the
certificates in each CRL.
</para>
</listitem>
</varlistentry>
<varlistentry id="file-quit">
<term><menuchoice><shortcut><keycombo action="simul">&Ctrl;<keycap>Q</keycap></keycombo></shortcut>
<guimenu>File</guimenu><guimenuitem>Quit</guimenuitem></menuchoice></term>
<listitem>
<para><action>Terminates &kleopatra;.</action></para>
</listitem>
</varlistentry>
</variablelist>
</sect1> <!-- File Menu -->
<sect1 id="menuview"><title>View Menu</title>
<variablelist>
<varlistentry id="view-redisplay">
<term><menuchoice><shortcut><keycombo action="simul"><keycap>F5</keycap></keycombo>
</shortcut><guimenu>View</guimenu><guimenuitem>Redisplay</guimenuitem></menuchoice></term>
<listitem>
<para><action>Redisplays the selected certificates or refreshes the
certificate list.</action></para>
<para>If there are selected certificates, the refresh operation is
restricted to those selected entries.</para>
<para>If a query result (either remote or local) is currently
displayed, the query is re-issued and the new results are displayed in
place of the old ones.</para>
<para>If no query has been performed, the whole keybox contents is
re-fetched and re-displayed.</para>
<para>You can use this if you have changed the contents of
the keybox by other means than &kleopatra; (&eg; by using &gpgsm;'s
command line interface).</para>
</listitem>
</varlistentry>
<varlistentry id="view-stop-operation">
<term><menuchoice><shortcut><keycombo action="simul"><keycap>Esc</keycap></keycombo></shortcut>
<guimenu>View</guimenu><guimenuitem>Stop Operation</guimenuitem></menuchoice></term>
<listitem>
<para><action>Stops (cancels) all pending operations,</action> &eg; a
search or a download.</para>
<note><para>Depending on the server used, cancelling a remote search
can block &kleopatra; for a few seconds while waiting for the backend
to complete the procedure. This is normal and expected
behavior.</para></note>
</listitem>
</varlistentry>
<varlistentry id="view-certificate-details">
<term><menuchoice><guimenu>View</guimenu><guimenuitem>Certificate Details...</guimenuitem></menuchoice></term>
<listitem>
<para><action>Shows the details of the currently selected
certificate.</action></para>
<para>This function is also available by double-clicking the
corresponding item in the list view directly.</para>
<!--FIXME: link to the dialog's help, but where do we put _that_?-->
</listitem>
</varlistentry>
<varlistentry id="view-hierarchical-key-list">
<term><menuchoice><guimenu>View</guimenu><guimenuitem>Hierarchical Key List</guimenuitem></menuchoice></term>
<listitem>
<para><action> Toggles between hierarchical and flat keylist mode.
</action></para>
<para>In hierarchical mode, certificates are arranged in
issuer/subject relation, so it is easy to see to which certification
hierarchy a given certificate belongs, but a given certificate is
harder to find initially (though you can of course use the
<link linkend="functions-search">search bar</link>).</para>
<para>In flat mode, all certificates are displayed in a flat list,
sorted alphabetically. In this mode, a given certificate is easy to
find, but it is not directly clear which root certificate it belongs
to.</para>
</listitem>
</varlistentry>
<varlistentry id="view-expand-all">
<term><menuchoice><shortcut><keycombo action="simul">&Ctrl;<keycap>.</keycap>
</keycombo></shortcut><guimenu>View</guimenu><guimenuitem>Expand All</guimenuitem></menuchoice></term>
<listitem>
<para>(This function is only available when <link
linkend="view-hierarchical-key-list"><menuchoice><guimenu>View</guimenu>
<guimenuitem>Hierarchical Key List</guimenuitem></menuchoice></link> is on.)</para>
<para><action>Expands all list items in the certificate list
view,</action> &ie; makes all items visible.</para>
<para>This is the default when entering hierarchical keylist
mode.</para>
<para>You can still expand and collapse each individual item by
itself, of course.</para>
</listitem>
</varlistentry>
<varlistentry id="view-collapse-all">
<term><menuchoice><shortcut><keycombo action="simul">&Ctrl;<keycap>,</keycap>
</keycombo></shortcut><guimenu>View</guimenu><guimenuitem>Collapse All</guimenuitem></menuchoice></term>
<listitem>
<para>(This function is only available when <link
linkend="view-hierarchical-key-list"><menuchoice><guimenu>View</guimenu>
<guimenuitem>Hierarchical Key List</guimenuitem></menuchoice></link> is on.)</para>
<para><action>Collapses all list items in the certificate list
view,</action> &ie; hides all but the top-level items.</para>
<para>You can still expand and collapse each individual item by
itself, of course.</para>
</listitem>
</varlistentry>
</variablelist>
</sect1>
<sect1 id="menucertificates"><title>Certificates Menu</title>
<variablelist>
<varlistentry id="certificates-validate">
<term><menuchoice><shortcut><keycombo action="simul">&Shift;<keycap>F5</keycap></keycombo>
</shortcut><guimenu>Certificates</guimenu><guimenuitem>Validate</guimenuitem></menuchoice></term>
<listitem>
<para><action>Validates selected (or all) keys.</action></para>
<para>This is similar to <link
linkend="view-redisplay"><menuchoice><shortcut><keycombo action="simul">
<keycap>F5</keycap></keycombo></shortcut><guimenu>View</guimenu>
<guimenuitem>Redisplay</guimenuitem></menuchoice></link>, but
performs a validation of the (selected) keys. Validation here means
that all relevant CRLs are fetched, and the certificate chain is
checked for correctness. As a result, invalid or expired keys will be
marked according to your color and font preferences set in the <link
linkend="configuration-appearance"><guilabel>Appearance</guilabel>
page</link> of &kleopatra;'s <link linkend="configuration">configure
dialog</link>.</para>
<warning><para>You can only rely on information from validated keys,
and, since any of them may be revoked at any time, even validation is
only ever a snapshot of the current state of the local keyring. This
is why the backend normally performs such checks whenever the keys
are used (&eg; for signing, signature verification, encryption or
decryption).</para></warning>
</listitem>
</varlistentry>
<varlistentry id="certificates-refresh-crls">
<term><menuchoice><guimenu>Certificates</guimenu><guimenuitem>Refresh CRLs</guimenuitem></menuchoice></term>
<listitem>
<para><action>Fetches the current CRLs for all selected keys,</action>
even though they would normally not be fetched when using the
key.</para>
<para>This function only has an effect on certificates which define a
CRL distribution point. Depending on the backend used, certificates
configured to perform checks using OCSP will not be updated.</para>
<para>You may use this &eg; if you have sideband knowledge that a key
has been revoked, and you want the backend to reflect this
<emphasis>now</emphasis> instead of relying on this to automatically
happen at the next scheduled CRL update.</para>
<warning><para>Excessive use of this function might put a high load on
your provider's or company's network, since CRLs of large
organizations can be surprisingly big (several megabytes are not
uncommon).</para>
<para>Use this function scarcely.</para></warning>
</listitem>
</varlistentry>
<varlistentry id="certificates-delete">
<term><menuchoice><shortcut><keycombo action="simul"><keycap>Delete</keycap></keycombo></shortcut>
<guimenu>Certificates</guimenu><guimenuitem>Delete</guimenuitem></menuchoice></term>
<listitem>
<para><action>Deletes selected certificate(s)</action> from the local keyring.</para>
<para>Use this function to remove unused keys from your local
keybox. However, since certificates are typically attached to signed
emails, verifying an email might result in the key just removed to pop
back into the local keybox. So it is probably best to avoid using this
function as much as possible. When you are lost, use the <link
linkend="functions-search">search bar</link> or the <link
linkend="view-hierarchical-key-list"><menuchoice><guimenu>View</guimenu>
<guimenuitem>Hierarchical Key List</guimenuitem></menuchoice></link> function to regain control over
the lot of certificates.</para>
</listitem>
</varlistentry>
<varlistentry id="certificates-download">
<term><menuchoice><guimenu>Certificates</guimenu><guimenuitem>Download</guimenuitem></menuchoice></term>
<listitem>
<para><action>Downloads the selected certificate(s) from the LDAP to the local keybox.</action></para>
</listitem>
</varlistentry>
</variablelist>
</sect1>
<sect1 id="menucrls"><title>CRLs Menu</title>
<variablelist>
<varlistentry id="crls-clear-crl-cache">
<term><menuchoice><guimenu>CRLs</guimenu><guimenuitem>Clear CRL Cache...</guimenuitem></menuchoice></term>
<listitem>
<para><action>Clears the &gpgsm; CRL cache.</action></para>
<para>You probably never need this. You can force a refresh of the CRL
cache by selecting all certificates and using <link linkend="certificates-refresh-crls"><menuchoice>
<guimenu>Certificates</guimenu><guimenuitem>Refresh CRLs</guimenuitem></menuchoice></link> instead.</para>
</listitem>
</varlistentry>
<varlistentry id="crls-dump-crl-cache">
<term><menuchoice><guimenu>CRLs</guimenu><guimenuitem>Dump CRL Cache...</guimenuitem></menuchoice></term>
<listitem>
<para><action>Shows the detailed contents of the &gpgsm; CRL
cache.</action></para>
</listitem>
</varlistentry>
</variablelist>
</sect1>
<sect1 id="menutools"><title>Tools Menu</title>
<variablelist>
<varlistentry id="tools-gnupg-log-viewer">
<term><menuchoice><guimenu>Tools</guimenu><guimenuitem>GnuPG Log Viewer...</guimenuitem></menuchoice></term>
<listitem>
<para><action>Starts <ulink url="help:/kwatchgnupg/index.html">&kwatchgnupg;</ulink></action></para>
</listitem>
</varlistentry>
</variablelist>
</sect1>
<sect1 id="menusettings"><title>Settings Menu</title>
<variablelist>
<varlistentry id="settings-show-statusbar">
<term><menuchoice><guimenu>Settings</guimenu><guimenuitem>Show Statusbar</guimenuitem></menuchoice></term>
<listitem>
<para><action>Toggles the visibility of the bottom status bar.</action></para>
</listitem>
</varlistentry>
<varlistentry id="settings-configure-shortcuts">
<term><menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure Shortcuts...</guimenuitem></menuchoice></term>
<listitem>
<para><action>Opens the standard &kde; shortcut configuration dialog,
where you can assign and re-assign keyboard shortcuts for all menu
items.</action></para>
</listitem>
</varlistentry>
<varlistentry id="settings-configure-kleopatra">
<term><menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure &kleopatra;...</guimenuitem></menuchoice></term>
<listitem>
<para><action>Opens &kleopatra;'s configure dialog.</action></para>
<para>See <xref linkend="configuration"/> for more details.</para>
</listitem>
</varlistentry>
<varlistentry id="settings-configure-gpgme-backend">
<term><menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure GpgME Backend...</guimenuitem></menuchoice></term>
<listitem>
<para><action>Opens a dialog that allows you to configure every aspect of
&gpgsm; and other backend modules.</action></para>
<para>This dialog is dynamically built from the output of the
&gpgconf; utility and may thus change when backend modules are
updated.</para>
</listitem>
</varlistentry>
</variablelist>
</sect1>
<sect1 id="menuhelp"><title>Help Menu</title>
<para>The <guimenu>Help</guimenu> menu contains the standard &kde;
help menu.</para>
&help.menu.documentation;
</sect1>
</chapter>
<chapter id="commandline-options"><title>Command Line Options Reference</title>
<para>Only the options specific to &kleopatra; are listed here. As
with all &kde; applications, you can get a complete list of options
by issuing the command <userinput><command>kleopatra
<option>--help</option></command></userinput>.</para>
<variablelist>
<varlistentry id="commandline-option-external">
<term>&commandline-option-external;</term>
<listitem>
<para><action>Specifies that &commandline-option-query; shall search
remotely instead of in the local keybox.</action></para>
</listitem>
</varlistentry>
<varlistentry id="commandline-option-query">
<term>&commandline-option-query;</term>
<listitem>
<para><action>Specifies that &kleopatra; shall start with the given
query string instead of listing the complete local
keybox.</action></para>
</listitem>
</varlistentry>
<varlistentry id="commandline-option-import-certificate">
<term>&commandline-option-import-certificate;</term>
<listitem>
<para><action>Specifies a file or URL from which to import
certificates (or secret keys) from.</action></para>
<para>This is the command line equivalent of <link
linkend="file-import-certificates"><menuchoice><guimenu>File</guimenu>
<guimenuitem>Import Certificates...</guimenuitem></menuchoice></link>.</para>
</listitem>
</varlistentry>
</variablelist>
</chapter>
<chapter id="configuration"><title>Configuring &kleopatra;</title>
<para>&kleopatra;'s configure dialog can be accessed via <link
linkend="settings-configure-kleopatra"><menuchoice><guimenu>Settings</guimenu>
<guimenuitem>Configure &kleopatra;...</guimenuitem></menuchoice></link>.</para>
<para>Each of its pages is described in the sections below.</para>
<sect1 id="configuration-directory-services"><title>Configuring Directory Services</title>
<para>On this page, you can configure which LDAP servers to use for
certificate searches. You can also configure their order, as well as
some selected LDAP-related settings from the dynamic backend
configuration dialog, available via <link
linkend="settings-configure-gpgme-backend"><menuchoice><guimenu>Settings</guimenu>
<guimenuitem>Configure GpgME Backend...</guimenuitem></menuchoice></link>.</para>
<para>To add a new server, click on the <guilabel>Add
Service...</guilabel> button. In the dialog that appears, you can set
the <guilabel>Server name</guilabel>, the <guilabel>Port</guilabel>
(preset to the default LDAP port), the <guilabel>Base &dn;</guilabel>
(sometimes referred to as the search root or search base), and the
usual <guilabel>User name</guilabel> and
<guilabel>Password</guilabel>, both of which are only needed if the
server requires authentication. Clicking <guilabel>OK</guilabel> adds
the server details to the list of servers, while
<guilabel>Cancel</guilabel> dismisses the input.</para>
<para>To remove a server from the search list, select it in the list,
then press the <guilabel>Remove Service</guilabel> button.</para>
<para>To change the relative search order of servers, select one of
them and move it up or down with the arrow buttons right next to the
list.</para>
<para>To set the LDAP timeout, &ie; the maximum time the backend will
wait for a server to respond, simply use the corresponding input field
labelled <guilabel>LDAP timeout</guilabel>.</para>
<para>If one of your servers has a large database, so that even
reasonable searches like <userinput>Smith</userinput> hit the
<guilabel>maximum number of items returned by query</guilabel>, you
might want to increase this limit. You can find out easily if you hit
the limit during a search, since a dialog box will pop up in that
case, telling you that the results have been truncated.</para>
<note><para>Some servers may impose their own limits on the number of
items returned from a query. In this case, increasing the limit here
will not result in more returned items.</para></note>
</sect1>
<sect1 id="configuration-appearance"><title>Configuring Visual Appearance</title>
<para>&kleopatra; allows you to customize the appearance of
(validated) keys in the list view. This includes the foreground (text)
and background colors, as well as the font.</para>
<para>Each <guilabel>Key Category</guilabel> on the left is assigned a
set of colors and a font in which keys belonging to that category are
displayed. The category list also acts as a preview of the
settings. Categories can be freely defined by the administrator or the
power user, see <xref linkend="admin-key-filters"/> in <xref
linkend="admin"/>.</para>
<para>To change the text (foreground) color of a category, select it
in the list, and press the <guilabel>Set Text Color...</guilabel>
button. The standard &kde; color selection dialog will appear where
you can select or create a new color.</para>
<para>Changing the background color is done in the same way, just press
<guilabel>Set Background Color...</guilabel> instead.</para>
<para>To change the font, you basically have two options:</para>
<orderedlist>
<listitem><para>Modify the standard font, used for all list views in
&kde;</para></listitem>
<listitem><para>Use a custom font.</para></listitem>
</orderedlist>
<para>The first option has the advantage that the font will follow
whichever style you choose &kde;-wide, whereas the latter gives you
full control over the font to use. The choice is yours.</para>
<para>To use the modified standard font, select the category in the
list, and check or uncheck the font modifiers
<guilabel>Italic</guilabel>, <guilabel>Bold</guilabel>, and/or
<guilabel>Strikeout</guilabel>. You can immediately see the effect on
the font in the category list.</para>
<para>To use a custom font, press the <guilabel>Set Font...</guilabel>
button. The standard &kde; font selection dialog will appear where you
can select the new font. Note that you can still use the font
modifiers to change the custom font, just as for modifying the
standard font.</para>
<para>To switch back to the standard font, you need to press the
<guilabel>Default Appearance</guilabel> button.</para>
</sect1>
<sect1 id="configuration-dn-order"><title>Configuring the Order &dn; Attributes are Shown</title>
<para>Although &dn;s are hierarchical, the order of the individual
components (called relative &dn;s (RDNs), or &dn; attributes) is not
defined. The order in which the attributes are shown is thus a matter
of personal taste or company policy, which is why it is configurable in
&kleopatra;.</para>
<note><para>This setting does not only apply to &kleopatra;, but to all
applications using &kleopatra; Technology. At the time of this
writing, these include &kmail;, &kaddressbook;, as well as &kleopatra;
itself, of course.</para></note>
<para>This configuration page basically consists of two lists, one for
the known attributes (<guilabel>Available attributes</guilabel>), and
one describing the <guilabel>Current attribute order</guilabel>.</para>
<para>Both lists contain entries described by the short from of the
attribute (&eg; <guilabel>CN</guilabel>) as well as the spelled-out
form (<guilabel>Common Name</guilabel>).</para>
<para>The <guilabel>Available attributes</guilabel> list is always
sorted alphabetically, while the <guilabel>Current attribute
order</guilabel> list's order reflects the configured &dn; attribute
order: the first attribute in the list is also the one displayed
first.</para>
<para>Only attributes explicitly listed in the <guilabel>Current
attribute order</guilabel> list are displayed at all. The rest is
hidden by default.</para>
<para>However, if the placeholder entry <guilabel>_X_</guilabel>
(<guilabel>All others</guilabel>) is in the <quote>current</quote>
list, all unlisted attributes (whether known or not), are inserted at
the point of <guilabel>_X_</guilabel>, in their original relative
order.</para>
<para>A small example will help to make this more clear:</para>
<informalexample>
<para>Given the &dn;</para>
<blockquote>
<para>
O=KDE, C=US, CN=Dave Devel, X-BAR=foo, OU=Kleopatra, X-FOO=bar,
</para>
</blockquote>
<para>the default attribute order of <quote>CN, L, _X_, OU, O,
C</quote> will produce the following formatted &dn;:</para>
<blockquote>
<para>
CN=Dave Devel, X-BAR=foo, X-FOO=bar, OU=Kleopatra, O=KDE, C=US
</para>
</blockquote>
<para>while <quote>CN, L, OU, O, C</quote> will produce</para>
<blockquote>
<para>
CN=Dave Devel, OU=Kleopatra, O=KDE, C=US
</para>
</blockquote>
</informalexample>
<para>To add an attribute to the display order list, select it in the
<guilabel>Available attributes</guilabel> list, and press the
<guilabel>Add to current attribute order</guilabel> button.</para>
<para>To remove an attribute from the display order list, select it in
the <guilabel>Current attribute order</guilabel> list, and press the
<guilabel>Remove from current attribute order</guilabel> button.</para>
<para>To move an attribute to the beginning (end), select it in the
<guilabel>Current attribute order</guilabel> list, and press the
<guilabel>Move to top</guilabel> (<guilabel>Move to bottom</guilabel>)
button.</para>
<para>To move an attribute up (down) one slot only, select it in the
<guilabel>Current attribute order</guilabel> list, and press the
<guilabel>Move one up</guilabel> (<guilabel>Move one down</guilabel>)
button.</para>
</sect1>
</chapter>
<chapter id="admin"><title>Administrator's Guide</title>
<para>This Administrator's Guide describes ways to customize &kleopatra; that
are not accessible via the &GUI;, but only via config files.</para>
<para>It is assumed that the reader is familiar with the technology
used for &kde; application configuration, including layout,
file system location and cascading of &kde; config files, as well as
the KIOSK framework.</para>
<sect1 id="admin-certificate-request-wizard"><title>Customization of the Certificate-Creation Wizard</title>
<para>&kleopatra; allows you to customize the fields that the user is
allowed to enter in order to create their certificate.</para>
<para>Create a group called
<literal>CertificateCreationWizard</literal> in the system-wide
<filename>kleopatrarc</filename>. If you want a custom order of
attributes or if you only want certain items to appear, create a key
called <varname>DNAttributeOrder</varname>. The argument is one or
more of <varname>CN,SN,GN,L,T,OU,O,PC,C,SP,DC,BC,EMAIL</varname> If
you want to initialize fields with a certain value, write something like
Attribute=value. If you want the attribute to be treated as a required
one, append an exclamation mark
(e.g. <varname>CN!,L,OU,O!,C!,EMAIL!</varname>, which happens to be
the default configuration).</para>
<para> Using the <acronym>KIOSK</acronym> mode modifier
<varname>$e</varname> allows to retrieve the values from
environment variables or from an evaluated script or binary. If you
want to disallow editing of the respective field in addition, use the
modifier <varname>$i</varname>. If you want to disallow the use
<guibutton>Insert My Address</guibutton> button, set
<varname>ShowSetWhoAmI</varname> to false.</para>
<tip><para> Due to the nature of the &kde; <acronym>KIOSK</acronym>
framework, using the immutable flag (<varname>$i</varname>) makes it
impossible for the user to override the flag. This is intended
behavior. <varname>$i</varname> and <varname>$e</varname> can be used
with all other config keys in &kde; applications as well.</para></tip>
<para>The following example outlines possible customizations:</para>
<para>
<programlisting>
[CertificateCreationWizard]
;Disallow to copy personal data from the addressbook, do not allow local override
ShowSetWhoAmI[$i]=false
;sets the user name to $USER
CN[$e]=$USER
;sets the company name to "My Company", disallows editing
O[$i]=My Company
;sets the department name to a value returned by a script
OU[$ei]=$(lookup_dept_from_ip)
; sets country to DE, but allows for changes by the user
C=DE
</programlisting>
</para>
</sect1>
<sect1 id="admin-key-filters">
<title>
Creating and Editing Key Categories
</title>
<para>
&kleopatra; allows the user to configure the <link
linkend="configuration-appearance">visual appearance</link> of
keys based on a concept called <guilabel>Key
Categories</guilabel>. This section describes how you can edit
the available categories and add new ones.
</para>
<para>
When trying to find the category a key belongs to, &kleopatra;
tries to match the key to a sequence of key filters,
configured in the <filename>libkleopatrarc</filename>. The
first one to match defines the category.
</para>
<para>
Each key filter is defined in a config group named
<literal>Key Filter #<replaceable>n</replaceable></literal>,
where <replaceable>n</replaceable> is a number, starting from
<literal>0</literal>.
</para>
<para>
The only mandatory key in a <literal>Key Filter
#<replaceable>n</replaceable></literal> group is
<varname>Name</varname>, containing the name of the category
as displayed in the <link
linkend="configuration-appearance">config dialog</link>.
</para>
<para>
<xref linkend="table-key-filters-appearance"/> lists all keys
that define the display properties of keys belonging to that
category (&ie; those keys that can be adjusted in the <link
linkend="configuration-appearance">config dialog</link>),
whereas <xref linkend="table-key-filters-criteria"/> lists all
keys that define the criteria the filter matches keys against.
</para>
<table id="table-key-filters-appearance">
<title>Key-Filter Configuration Keys Defining Display
Properties</title>
<tgroup cols="3">
<colspec colnum="2" align="center"/>
<thead>
<row>
<entry>Config Key</entry>
<entry>Type</entry>
<entry>Description</entry>
</row>
</thead>
<!--tfoot/-->
<tbody>
<row>
<entry><varname>background-color</varname></entry>
<entry>color</entry>
<entry>
The background color to use. If missing, defaults to
whichever background color is defined globally for list
views.
</entry>
</row>
<row>
<entry><varname>foreground-color</varname></entry>
<entry>color</entry>
<entry>
The foreground color to use. If missing, defaults to
whichever foreground color is defined globally for list
views.
</entry>
</row>
<row>
<entry><varname>font</varname></entry>
<entry>font</entry>
<entry>
The custom font to use. The font will be scaled to the
size configured for list views, and any font
attributes (see below) will be applied.
</entry>
</row>
<row>
<entry><varname>font-bold</varname></entry>
<entry>boolean</entry>
<entry>
If set to <literal>true</literal> and
<varname>font</varname> is not set, uses the
default list view font with bold font style added (if
available). Ignored if <varname>font</varname> is also
present.
</entry>
</row>
<row>
<entry><varname>font-italic</varname></entry>
<entry>boolean</entry>
<entry>
Analogous to <varname>font-bold</varname>, but for
italic font style instead of bold.
</entry>
</row>
<row>
<entry><varname>font-strikeout</varname></entry>
<entry>boolean</entry>
<entry>
If <literal>true</literal>, draws a centered line over
the font. Applied even if
<varname>font</varname> is set.
</entry>
</row>
<row>
<entry><varname>icon</varname></entry>
<entry>text</entry>
<entry>
The name of an icon to show in the first column. Not yet
implemented.
</entry>
</row>
</tbody>
</tgroup>
</table>
<table id="table-key-filters-criteria">
<title>Key-Filter Configuration Keys Defining Filter Criteria</title>
<tgroup cols="3">
<colspec colnum="2" align="center"/>
<thead>
<row>
<entry>Config Key</entry>
<entry>Type</entry>
<entry>If specified, filter matches when...</entry>
</row>
</thead>
<!--tfoot/-->
<tbody>
<row>
<entry><varname>is-revoked</varname></entry>
<entry>boolean</entry>
<entry>the key has been revoked.</entry>
</row>
<row>
<entry><varname>is-expired</varname></entry>
<entry>boolean</entry>
<entry>the key is expired.</entry>
</row>
<row>
<entry><varname>is-disabled</varname></entry>
<entry>boolean</entry>
<entry>
the key has been disabled (marked for not using) by
the user. Ignored for &smime; keys.
</entry>
</row>
<row>
<entry><varname>is-root-certificate</varname></entry>
<entry>boolean</entry>
<entry>
the key is a root certificate. Ignored for OpenPGP
keys.
</entry>
</row>
<row>
<entry><varname>can-encrypt</varname></entry>
<entry>boolean</entry>
<entry>
the key can be used for encryption.
</entry>
</row>
<row>
<entry><varname>can-sign</varname></entry>
<entry>boolean</entry>
<entry>
the key can be used for signing.
</entry>
</row>
<row>
<entry><varname>can-certify</varname></entry>
<entry>boolean</entry>
<entry>
the key can be used for signing (certifying) other
keys.
</entry>
</row>
<row>
<entry><varname>can-authenticate</varname></entry>
<entry>boolean</entry>
<entry>
the key can be used for authentication (&eg; as an
<acronym>TLS</acronym> client certificate).
</entry>
</row>
<row>
<entry><varname>has-secret-key</varname></entry>
<entry>boolean</entry>
<entry>
the secret key for this key pair is available.
</entry>
</row>
<row>
<entry><varname>is-openpgp-key</varname></entry>
<entry>boolean</entry>
<entry>
the key is an OpenPGP key (<literal>true</literal>),
or an &smime; key (<literal>false</literal>).
</entry>
</row>
<row>
<entry><varname>was-validated</varname></entry>
<entry>boolean</entry>
<entry>
the key has been validated (see <link
linkend="certificates-validate"><menuchoice><shortcut><keycombo action="simul">&Shift;<keycap>F5</keycap></keycombo></shortcut>
<guimenu>Certificates</guimenu><guimenuitem>Validate</guimenuitem></menuchoice></link>).
</entry>
</row>
<row>
<entry><varname><replaceable>prefix</replaceable>-ownertrust</varname></entry>
<entry>
validity<footnote>
<para>
Validity is an (ordered) enumeration with the
following allowed values:
<literal>unknown</literal>,
<literal>undefined</literal>,
<literal>never</literal>,
<literal>marginal</literal>,
<literal>full</literal>,
<literal>ultimate</literal>. See the &gpg; and
&gpgsm; manuals for a detailed explanation.
</para>
</footnote>
</entry>
<entry>
the key has exactly
(<replaceable>prefix</replaceable>&nbsp;=&nbsp;<literal>is</literal>),
has anything but
(<replaceable>prefix</replaceable>&nbsp;=&nbsp;<literal>is-not</literal>),
has at least
(<replaceable>prefix</replaceable>&nbsp;=&nbsp;<literal>is-at-least</literal>),
or has at most
(<replaceable>prefix</replaceable>&nbsp;=&nbsp;<literal>is-at-most</literal>)
the ownertrust given as the value of the config key. If
more than one
<varname><replaceable>prefix</replaceable>-ownertrust</varname>
keys (with different
<replaceable>prefix</replaceable> values) are present in a
single group, the behavior is undefined.
</entry>
</row>
<row>
<entry><varname><replaceable>prefix</replaceable>-validity</varname></entry>
<entry>validity</entry>
<entry>
Analogous to
<varname><replaceable>prefix</replaceable>-ownertrust</varname>,
but for key validity instead of ownertrust.
</entry>
</row>
</tbody>
</tgroup>
</table>
<note>
<para>
Some of the more interesting criteria, such as
<varname>is-revoked</varname> or
<varname>is-expired</varname> will only work on
<emphasis>validated</emphasis> keys, which is why, by
default, only validated keys are checked for revocation and
expiration, although you are free to remove these extra
checks.
</para>
</note>
<para>
In general, criteria not specified (&ie; the config entry is
not set) are not checked for. If a criterion is given, it
is checked for and must match for the filter as a whole to
match, &ie; the criteria are AND'ed together.
</para>
<example>
<title>
Examples of key filters
</title>
<para>
To check for all expired, but non-revoked root certificates,
you would use a key filter defined as follows:
</para>
<!-- isn't there a better way to not indent this in the output??? -->
<screen><!--
-->[Key Filter #<replaceable>n</replaceable>]
Name=expired, but not revoked
was-validated=true
is-expired=true
is-revoked=false
is-root-certificate=true<!--
--></screen>
<para>
To check for all disabled OpenPGP keys (not yet supported by &kleopatra;)
with ownertrust of at least
<quote>marginal</quote>, you would use:
</para>
<screen><!--
-->[Key Filter #<replaceable>n</replaceable>]
Name=disabled OpenPGP keys with marginal or better ownertrust
is-openpgp=true
is-disabled=true
is-at-least-ownertrust=marginal<!--
--></screen>
</example>
</sect1>
</chapter> <!-- Administrator's Guide -->
<chapter id="credits-and-license">
<title>Credits and License</title>
<para>&kleopatra; copyright 2002 &Steffen.Hansen;, &Matthias.Kalle.Dalheimer;
and &Jesper.Pedersen;., copyright 2004 &Daniel.Molkentin;, copyright 2004 Klar&auml;lvdalens Datakonsult AB</para>
<para>Documentation copyright 2002 &Steffen.Hansen;, copyright 2004
&Daniel.Molkentin;, copyright 2004 Klar&auml;lvdalens Datakonsult AB</para>
<itemizedlist>
<title>Contributors</title>
<listitem>
<para>&Marc.Mutz; &Marc.Mutz.mail;</para>
</listitem>
<listitem>
<para>&David.Faure; &David.Faure.mail;</para>
</listitem>
<listitem>
<para>&Steffen.Hansen; <email>hansen@kde.org</email></para>
</listitem>
<listitem>
<para>&Matthias.Kalle.Dalheimer; &Matthias.Kalle.Dalheimer.mail;</para>
</listitem>
<listitem>
<para>&Jesper.Pedersen; &Jesper.Pedersen.mail;</para>
</listitem>
<listitem>
<para>&Daniel.Molkentin; &Daniel.Molkentin.mail;</para>
</listitem>
</itemizedlist>
<!-- TRANS:CREDIT_FOR_TRANSLATORS -->
&underFDL;
&underGPL;
</chapter>
&documentation.index;
</book>
<!--
Local Variables:
mode: sgml
sgml-minimize-attributes:nil
sgml-general-insert-case:lower
sgml-indent-step:0
sgml-indent-data:nil
End:
// vim:ts=2:sw=2:tw=78:noet
-->