You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tdesdk/scripts/kde-build

902 lines
25 KiB

#! /usr/bin/env bash
################################################################################
# Updates and recompiles a local KDE tree from SVN #
# (c) 2000, 2001, 2002, 2003 by Frerich Raabe <raabe@kde.org> #
# (c) 2002, 2003 by Stephan Kulow <coolo@kde.org> #
################################################################################
# Do not edit this file, change kde-buildrc instead! #
################################################################################
# These strings are defined as variables to make the output look more
# consistent.
#
str_okay="done!"
str_error="failed!"
# The variables whose name is prefixed with ERR_ hold the error codes which
# are returned by the script and depend on the reason for aborting the
# execution.
#
# No error has been noticed, everything seems to be fine.
#
err_no_error="0"
# Could not change into a directory of a module - wrong owner/access
# settings?
#
err_change_into_mod_dir="1"
# Could not find the file 'Makefile.in' for a module, mostly happens if
# 'make -f Makefile.cvs' hasn't been executed for a module.
#
err_no_makefile_in="2"
# The 'configure' command failed for a module because the system doesn't
# support certain features - I hope you activated logfile generation... ;)
#
err_configure_fail="3"
# The compilation of a module failed - if the module is defined in
# $critical_modules (see below) the execution is aborted, otherwise the script
# will continue with the next module.
#
err_compile_fail="4"
# The installation of a module failed - this mostly happens if there's not
# enough free disk space on the partition which $TDEDIRS is mounted to.
#
err_install_fail="5"
# The $KDESRCDIR variable wasn't set or contains a non-existant directory.
#
err_inv_kdesrcdir="6"
# The $TQTDIR variable wasn't set, points to a non-existant directory or
# doesn't contain a bin/, lib/, or include/ subdirectory.
#
err_inv_qtdir="7"
# ....
# The configuration file couldn't be found.
#
err_no_config="11"
# You can't mix CVS_CLEAN and INCREMENTAL_BUILD
#
err_cvsclean_incremental="12"
# You can't mix BUILD_CLEAN and INCREMENTAL_BUILD
#
err_buildclean_incremental="13"
# Certain modules depend on others - those "base" modules which are required
# by others to compile and/or run should be listed here to ensure that the
# script is aborted in case on of these modules doesn't build.
# These modules needs to be build and installed in this specific order!
#
critical_modules="arts tdelibs tdebase"
# Internal variable, do not change.
#
dateformat="`date +%Y%m%d`"
# Private variables fro controlling kppp
#
we_started_kppp="FALSE"
# Connects to the internet using kppp if desired
#
kppp_connect()
{
if [ "$USE_KPPP" = "TRUE" ]; then
kppp_process=`dcopfind -a kppp-*`
if [ "$kppp_process" = "" ]; then
#kppp not running
kppp > /dev/null 2>&1 &
sleep $KPPP_LOAD_TIME
`dcop $(dcopfind -a kppp-*) KpppIface beginConnect`
#wait for a while
sleep $KPPP_CONNECT_TIME
kppp_connected=`dcop $(dcopfind -a kppp-*) KpppIface isConnected`
if [ "$kppp_connected" = "true" ]; then
we_started_kppp="TRUE"
echo Connected OK
else
echo Could not connect, maybe you need to increase KPPP_CONNECT_TIME
fi
else
kppp_connected=`dcop $(dcopfind -a kppp-*) KpppIface isConnected`
if [ "$kppp_connected" = "false" ]; then
#Start a connection
`dcop $(dcopfind -a kppp-*) KpppIface beginConnect`
#wait for a while
sleep $KPPP_CONNECT_TIME
kppp_connected=`dcop $(dcopfind -a kppp-*) KpppIface isConnected`
if [ "$kppp_connected" = "true" ]; then
we_started_kppp="TRUE"
echo Connected OK
else
echo Could not connect, maybe you need to increase KPPP_CONNECT_TIME
fi
else
echo Kppp is already connected to the internet
fi
fi
fi
}
# Disconnects from the internet using kppp if desired
#
kppp_disconnect()
{
if [ "$USE_KPPP" = "TRUE" ]; then
if [ $(dcopfind -a kppp-*) = "" ]; then
#kppp not running
echo Kppp was not running so cannot be disconnected
else
if [ "$we_started_kppp" = "TRUE" ]; then
echo Disconnecting kppp
`dcop $(dcopfind -a kppp-*) KpppIface disconnect`
else
echo We didnt connect using kppp so we wont disconnect
fi
fi
fi
}
# This method gives some kind of status message in the title bar of Konsole,
# xterm, etc.. Thanks have to go to Malte Starostik
# <malte@kde.org> for the code :-)
set_title() {
which printf > /dev/null 2>&1 || return
if ([ "$TERM" = "xterm" ] || [ "$TERM" = "xterm-color" ] || [ "$TERM" = "screen" ]) && tty -s; then
printf "\033]0;$1\007"
fi
}
# moves a log file to be named $1, so one can see on first glance
move_logfile() {
rename_logfile=`echo $logfile | sed -e "s,-build-,-$1-,"`
mv "$logfile" "$rename_logfile"
logfile=$rename_logfile
}
# Executes the given command, logging the output to $logfile if requested.
#
log_cmd() {
if [ -n "$logfile" ]; then
eval "$1 >> $logfile 2>&1"
else
eval "$1"
fi
return $?
}
module_variable() {
eval "$1=\$BASE_$1"
varname="$1_"`echo $module|tr a-z A-Z|tr - _|sed "s/\(.*\)-[0-9]*/\1/g"`; # e.g. $1_ARTS etc.
varvalue=`eval echo '$'$varname`
if [ -n "$varvalue" ]; then
eval "$1=\"$varvalue\""
fi
}
# Inserts a "-> blah <---" style separator into $logfile, and starts a timer
log_section() {
[ -z "$logfile" ] && return 0
len=`echo $1 | wc -m | sed -e "s,^ *,,"`
echo "------------------------------------------------------------------------" \
| sed -e "s,^,-> $1 <," -e "s,.\{$len\}$,," >> $logfile 2>&1
starttime=`date +%s`
}
# Computes the time elapsed since the last log_section call,
# inserts a "----" separator, and the time needed, into $logfile
log_endsection() {
[ -z "$logfile" ] && return 0
compute_time
echo "----------------------------------------------------------------------------" >> $logfile 2>&1
printf "%s for module %s done. Time needed: %02d:%02d:%02d\n" "$1" $module $hours $minutes $seconds >> $logfile 2>&1
echo "" >> $logfile 2>&1
}
# This function computes the time which was needed for a certain task, using
# expr (instead of shell-specific features) for portability.
#
compute_time() {
duration=`expr \`date +%s\` - $starttime`
hours=`expr $duration / 3600`
minutes=`expr $duration % 3600 / 60`
seconds=`expr $duration % 60`
}
prepare_update() {
# This checks whether the user wants a certain branch and generates the
# command line.
#
cmd_update="svn"
if test -d $KDESRCDIR/$module; then
test -z "$SUBDIR" && { cmd_update="$cmd_update update" ; return; }
cmd_update="$cmd_update switch -r HEAD"
else
cmd_update="$cmd_update co"
fi
if [ -z "$ACCOUNT" ]; then
cmd_update="$cmd_update $ANONSVNROOT$SUBDIR"
else
cmd_update="$cmd_update"
if [ "$SSHACCOUNT" = "yes" ]; then
cmd_update="$cmd_update svn+ssh://$ACCOUNT@svn.kde.org/home/kde$SUBDIR"
else
cmd_update="$cmd_update https://$ACCOUNT@svn.kde.org/home/kde$SUBDIR"
fi
fi
if [ -n "$CHECKOUT_PARTIAL" -a "$1" = "toponly" ]; then # TODO
cmd_update="$cmd_update -N"
fi
if test ! -d $KDESRCDIR/$module; then
cmd_update="$cmd_update $module"
fi
}
# This function installs a compiled CVS module.
#
install_module() {
echo -n " Installing..."
set_title "Installing module $module..."
log_section "Installation"
if log_cmd "$cmd_make_install"; then
log_endsection "Installation"
if [ -n "$KDELOGDIR" ]; then
echo "Build of module $module successfully finished at `date +%c`" >> $logfile
[ -n "$cmd_compress" ] && eval "$cmd_compress $logfile"
fi
echo "$str_okay"
echo "Module $module successfully installed in $TDEDIRS!"
move_logfile "finished"
else
echo "$str_error"
move_logfile "failed"
[ -n "$cmd_compress" ] && eval "$cmd_compress $logfile"
[ $critical -eq 0 ] || exit $err_compile_fail
fi
}
make_makefile_cvs() {
cmd_make_makefile_cvs="$MAKE -f Makefile.cvs"
if [ "$NICECOMPILE" = yes ]; then
cmd_make_makefile_cvs="nice $cmd_make_makefile_cvs"
fi
unset UNSERMAKE || true
if [ -n "$USE_UNSERMAKE" ] && \
!(echo $NO_UNSERMAKE_MODULES | grep $module > /dev/null 2>&1); then
export UNSERMAKE=$USE_UNSERMAKE
fi
if [ "$INCREMENTAL_BUILD" = "yes" -a -e "Makefile.in" ]; then
cmd_make_makefile_cvs="echo Warning: no Makefile.cvs for module $module - as requested"
fi
if log_cmd "$cmd_make_makefile_cvs"; then
echo "$str_okay"
else
echo "$str_error"
fi
}
# Disable zsh feature
CDPATH=
# Get current configuration, bail out if it couldn't be found.
# Search order is $PWD:$HOME:`dirname $0`
# The name in $HOME is .kde-buildrc (note the leading '.')
if [ -e "$PWD/kde-buildrc" ]; then
rc_file="$PWD/kde-buildrc"
else
if [ -e "$HOME/.kde-buildrc" ]; then
rc_file="$HOME/.kde-buildrc"
else
if [ -e "`dirname $0`/kde-buildrc" ]; then
rc_file="`dirname $0`/kde-buildrc"
else
echo "ERROR: Cannot locate configuration file kde-buildrc!"; exit $err_no_config
fi
fi
fi
INCREMENTAL_BUILD="no"
. $rc_file
if [ "${INCREMENTAL_BUILD}" = "yes" -a "${CVS_CLEAN}" = "yes" ]; then
echo "ERROR: Cannot use CVS_CLEAN=\"yes\" and INCREMENTAL_BUILD=\"yes\" together!"; exit $err_cvsclean_incremental
fi
if [ "${INCREMENTAL_BUILD}" = "yes" -a "${BUILD_CLEAN}" = "yes" ]; then
echo "ERROR: Cannot use BUILD_CLEAN=\"yes\" and INCREMENTAL_BUILD=\"yes\" together!"; exit $err_buildclean_incremental
fi
domakecvs=1
dosvnupdate=1
dousage=0
specifiedModules=""
# Parse args
#
while [ $# != 0 ]
do
arg=$1
case "$arg" in
--help)
dousage=1
break ;;
--version)
# Show version
echo "$0 version 0.8.15"
exit $err_no_error ;;
--no-update)
dosvnupdate=0 ;;
--no-check)
domakecvs=0 ;;
--incremental)
INCREMENTAL_BUILD="yes"
;;
--full)
INCREMENTAL_BUILD="no"
;;
-*)
echo "Unhandled option $arg"
dousage=1
break ;;
*)
specifiedModules="$specifiedModules $arg" ;;
esac
shift
done
# Show help info
if [ "$dousage" -eq 1 ]; then
echo "usage: $0 [--options] [modules]"
echo "--no-update Do not update from SVN."
echo "--no-check Do not re-run Makefile.cvs."
echo "--incremental Start make right after update - risky. This also"
echo " disables the BUILD_CLEAN and CVS_CLEAN options."
echo "--full Do full setup even when INCREMENTAL_BUILD is set."
echo "--help Show this message."
exit $err_no_error
fi
# Expand ~
TQTDIR=`echo "$TQTDIR" | sed -e "s,^\~/,$HOME/,"`
KDESRCDIR=`echo "$KDESRCDIR" | sed -e "s,^\~/,$HOME/,"`
KDEBUILDDIR=`echo "$KDEBUILDDIR" |sed -e "s,^\~/,$HOME/,"`
TDEDIRS=`echo "$TDEDIRS" |sed -e "s,^\~/,$HOME/,"`
KDELOGDIR=`echo "$KDELOGDIR" |sed -e "s,^\~/,$HOME/,"`
# Make sure some paths are according to the rc file. Note that there are AFAIK
# UNIX flavors which don't support LD_LIBRARY_PATH
PATH=$TQTDIR/bin:$TDEDIRS/bin:$PATH
MANPATH=$TQTDIR/doc/man:$MANPATH
LD_LIBRARY_PATH=$TDEDIRS/lib:$TQTDIR/lib:$LD_LIBRARY_PATH
if [ -n "$USE_UNSERMAKE" ]; then
if [ -n "$MAKE" ]; then
echo "overwriting MAKE=$USE_UNSERMAKE"
fi
MAKE=$USE_UNSERMAKE
UNSERMAKE_PATH=`dirname $USE_UNSERMAKE`
PATH=$UNSERMAKE_PATH:$PATH
fi
if [ -z "$MAKE" ]; then
MAKE=make
fi
if [ -n "$specifiedModules" ]; then
# In case someone with a tdebase dir in $PWD does autocompletion..
modules=$( echo $specifiedModules | sed -e 's/\///g' )
else
if [ "$ONLYLISTEDMODULES" = yes ]; then
if [ "$USETDESUPPORT" = yes ]; then
modules="tdesupport $critical_modules $KDEMODULES"
else
modules="$critical_modules $KDEMODULES"
fi
else
modules="$critical_modules"
# This generates in 'modules' a list of the modules which shall be updated.
#
potential_modules=`find $KDESRCDIR -type d -mindepth 1 \
-maxdepth 1 -follow | sed -e "s@.*/?*@@"`
for module in $potential_modules; do
if [ -d $KDESRCDIR/$module/CVS -a -w $KDESRCDIR/$module ] \
&& !(echo $EXCLUDE | grep -q $module) \
&& !(echo $modules | grep -q $module) ; then
modules="$modules $module"
fi
done
fi
fi
# Various checks to ensure that the user didn't specify invalid data which
# would make our script break.
#
if [ -n "$KDELOGDIR" -a ! -d "$KDELOGDIR" ]; then
if ! mkdir -p "$KDELOGDIR" > /dev/null 2>&1; then
echo "WARNING: Could not create logfile-directory."
echo "WARNING: Logfile generation deactivated."
KDELOGDIR=""
fi
else
if [ -n "$KDELOGDIR" -a ! -w "$KDELOGDIR" ]; then
echo "WARNING: Could not obtain write access to specified logfile-directory."
echo "WARNING: Logfile generation deactivated."
KDELOGDIR=""
fi
fi
if [ -n "$KDELOGDIR" ]; then
str_error="$str_error Check the logfile in $KDELOGDIR for further information."
fi
if [ ! -d "$KDESRCDIR" ]; then
echo "ERROR: Invalid source directory specified!"; exit $err_inv_kdesrcdir
fi
if [ ! -d "$TQTDIR" -o ! -d "$TQTDIR/lib" -o ! -d "$TQTDIR/bin" -o ! -d "$TQTDIR/include" ]; then
echo "ERROR: Invalid Qt directory specified!"; exit $err_inv_qtdir
fi
if [ "$COMPRESSLOGS" = yes ]; then
if which bzip2 > /dev/null 2>&1; then
cmd_compress="`which bzip2` -f "
else
if which gzip > /dev/null 2>&1; then
cmd_compress="`which gzip` -f "
else
echo "WARNING: Neither bzip2 nor gzip was found, disabling compression of logfiles."
cmd_compress=""
fi
fi
fi
if which sudo > /dev/null 2>&1; then
cmd_sudo="sudo"
else
cmd_sudo="su -c"
fi
# Clean the installation directory if selected.
#
if test "$INSTALLFROMSCRATCH" = yes && test -z "$specifiedModules" ; then
mkdir -p $TDEDIRS 2> /dev/null
if [ ! -w $TDEDIRS ]; then
echo "Enter the root password to clean the installation directory."
echo "WARNING: All files and directories in $TDEDIRS will be deleted!"
echo -n "Please enter root "
eval "$cmd_sudo rm -rf $TDEDIRS/*"
else
rm -rf $TDEDIRS/*
fi
fi
# Optionally activate cheap tweaks.
#
if [ "$TWEAKCOMPILE" = yes ]; then
CFLAGS="-O0"
CXXFLAGS="-O0"
export CFLAGS CXXFLAGS
fi
# Preprocess configuration keys, expand keywords (DISTCC)
#
if echo $MAKE_OPTS_COMPILE | grep DISTCC > /dev/null; then
if [ -n "$DISTCC_HOSTS" ]; then
hosts=0
for host in $DISTCC_HOSTS; do
hosts=$((${hosts} + 1))
done
hosts=$((${hosts} * 2))
else
hosts=1
fi
MAKE_OPTS_COMPILE=`echo $MAKE_OPTS_COMPILE | sed -e "s,DISTCC,$hosts,"`
fi
if echo $MAKE_OPTS_COMPILE | grep TEAMBUILDER > /dev/null; then
if ! which tbcompiler > /dev/null 2>&1; then
echo "TEAMBUILDER is not in PATH and OPTS_COMPILE has TEAMBUILDER"
exit 1
fi
hosts=`tbcompiler -joblimit`
if [ -z "$hosts" ]; then
hosts=1
fi
MAKE_OPTS_COMPILE=`echo $MAKE_OPTS_COMPILE | sed -e "s,TEAMBUILDER,$hosts,"`
fi
#Connect to the internet before we start enything
#
kppp_connect
# Guess what? We'll finally start checking out the modules. :-)
#
# If we want to use unsermake, update that at the very beginning, so that
# all the modules make use of the most recent unsermake version.
#
if [ -n "$USE_UNSERMAKE" ] && [ "$dosvnupdate" -eq 1 ]; then
echo -n "Updating unsermake copy in $UNSERMAKE_PATH..."
cd "$UNSERMAKE_PATH"
svn up > /dev/null 2>&1
echo $str_okay
fi
BASE_CONFIGUREFLAGS="$CONFIGUREFLAGS"
BASE_SUBDIR=$SUBDIR
BASE_CHECKOUT_PARTIAL="$CHECKOUT_PARTIAL"
for module in $modules; do
module_variable SUBDIR
SUBDIR=`echo $SUBDIR | sed -e "s,@MODULE@,$module,"`
module_variable CHECKOUT_PARTIAL
if [ -n "$KDELOGDIR" ]; then
rm -f $KDELOGDIR/$module-build-*
rm -f $KDELOGDIR/$module-failed-*
rm -f $KDELOGDIR/$module-finished-*
logfile="$KDELOGDIR/$module-build-$dateformat.log"
echo "===============================================================================" > $logfile
echo "Build log of module $module, started on `date +%c`" >> $logfile
echo "===============================================================================" >> $logfile
echo "" >> $logfile
fi
set_title "Updating module $module..."
if [ "$dosvnupdate" -eq 0 ]; then
echo -n "Checking module $module (no svn update)..."
cmd_update_raw="echo Warning: no svn update of module $module - as requested"
else
if [ -n "$BRANCH" ]; then
echo -n "Updating module $module ($BRANCH)..."
else
echo -n "Updating module $module ..."
fi
prepare_update
cmd_update_raw="$cmd_update"
fi
log_section "Update $cmd_update"
if [ "$dosvnupdate" -ne 0 -a -n "$CHECKOUT_PARTIAL" ]; then
cmd_update_raw="$cmd_update -l $module"
fi
if test -d $KDESRCDIR/$module; then
cd $KDESRCDIR/$module
else
cd $KDESRCDIR
fi
if ! log_cmd "$cmd_update_raw"; then
echo "$str_error"
continue
fi
if [ "$dosvnupdate" -ne 0 -a -n "$CHECKOUT_PARTIAL" ]; then
prepare_update toponly
echo "defined subdirs!"
for part_dir in $CHECKOUT_PARTIAL; do
echo -n "Updating subdirectory $part_dir"
log_cmd "$cmd_update $module/$part_dir"
echo " $str_okay"
done
echo -n "Final touch..."
fi
if [ "$CVS_CLEAN" = "yes" -a -e admin/Makefile.common -a "$INCREMENTAL_BUILD" != "yes" ]; then
cmd_make_cvs_clean="$MAKE -f admin/Makefile.common cvs-clean"
fi
if ! log_cmd "$cmd_make_cvs_clean"; then
echo "$str_error"
continue
fi
if [ ! -e Makefile.cvs ]; then
echo "$str_okay"
continue
fi
if [ $domakecvs = 1 ] ; then
make_makefile_cvs
else
echo "$src_okay"
continue
fi
log_endsection "Updating"
done
# Now disconnect from the internet as we've finished updating
#
kppp_disconnect
for module in $modules; do
module_variable CONFIGUREFLAGS
# Nothing to do for kde-common
[ "$module" = "kde-common" ] && continue
logfile="$KDELOGDIR/$module-build-$dateformat.log"
critical=0
for m in $critical_modules; do if [ $m = $module ]; then critical=1; fi; done
if ! cd $KDESRCDIR/$module; then
if [ $critical -eq 1 ]; then
echo "ERROR: Could not change into directory $KDESRCDIR/$module!"
exit $err_change_into_mod_dir
else
echo "WARNING: Could not change into directory $KDESRCDIR/$module."
echo "WARNING: Skipping module $module."
continue
fi
fi
# Check whether 'make -f Makefile.cvs' has been called.
#
if [ ! -e "Makefile.in" ]; then
if [ $critical -eq 1 ]; then
echo "ERROR: Please execute '$MAKE -f Makefile.cvs' first for module $module!"
exit $err_no_makefile_in
else
echo "WARNING: '$MAKE -f Makefile.cvs' seems not to be executed for"
echo "WARNING: module $module, skipping compilation."
continue
fi
fi
echo "Building module: $module"
if [ -n "$KDEBUILDDIR" ]; then
if [ "$BUILD_CLEAN" = "yes" -a "$INCREMENTAL_BUILD" != "yes" ]; then
if [ -d $KDEBUILDDIR/$module ]; then
echo -n " Removing build dir..."
set_title "Removing build dir for module $module..."
rm -rf $KDEBUILDDIR/$module
echo $str_okay
fi
fi
mkdir -p $KDEBUILDDIR/$module
cd $KDEBUILDDIR/$module
fi
# Configure the module.
#
echo -n " Configuring..."
set_title "Configuring module $module..."
if [ -n "$KDEBUILDDIR" ]; then
cmd_configure="$KDESRCDIR/$module/configure $CONFIGUREFLAGS --with-qt-dir=$TQTDIR"
else
cmd_configure="./configure $CONFIGUREFLAGS --with-qt-dir=$TQTDIR"
fi
if echo $CONFIGUREFLAGS | grep -v -- "--prefix=" 2>/dev/null >/dev/null; then
cmd_configure="$cmd_configure --prefix=$TDEDIRS"
fi
[ "$NICECOMPILE" = yes ] && cmd_configure="nice $cmd_configure"
configure_skipped=0
if [ "$INCREMENTAL_BUILD" = "yes" -a -e "Makefile" ]; then
cmd_configure_orig=$cmd_configure
cmd_configure="echo Warning: no configure for module $module - as requested"
configure_skipped=1
fi
log_section "Configuration"
if [ -n "$KDELOGDIR" -a $configure_skipped -ne 1 ]; then
echo $cmd_configure >> $logfile
fi
if ! log_cmd "$cmd_configure"; then
echo "$str_error"
move_logfile "failed"
[ -n "$cmd_compress" ] && eval "$cmd_compress $logfile"
[ $critical -eq 0 ] || exit $err_compile_fail
continue
fi
log_endsection "Configuration"
if [ $configure_skipped -eq 1 ]; then
echo " skipped."
else
echo "$str_okay"
fi
if [ $configure_skipped -eq 1 ]; then
echo -n " Updating Makefile..."
cmd_make_makefile="$MAKE $MAKE_OPTS Makefile"
[ "$NICECOMPILE" = yes ] && cmd_make_makefile="nice $cmd_make_makefile"
log_section "Updating Makefile"
if [ -n "$KDELOGDIR" ]; then
echo $cmd_make_makefile >> $logfile
fi
if ! log_cmd "$cmd_make_makefile"; then
echo -n " Falling back to normal Makefile.cvs ..."
worked=0
if [ -n "$KDEBUILDDIR" ]; then
cd $KDESRCDIR/$module # get back to the supermarket
fi
rm Makefile.in
make_makefile_cvs
if [ -n "$KDEBUILDDIR" ]; then
cd $KDEBUILDDIR/$module # got the sugar, honey?
fi
echo -n " Configuring..."
if log_cmd "$cmd_configure_orig"; then
if log_cmd "$cmd_make_makefile"; then
worked=1
fi
fi
if [ $worked -ne 1 ]; then
echo "$str_error"
move_logfile "failed"
[ -n "$cmd_compress" ] && eval "$cmd_compress $logfile"
[ $critical -eq 0 ] || exit $err_compile_fail
continue
fi
fi
log_endsection "Updating Makefile"
echo "$str_okay"
fi
# Compile the module.
#
echo -n " Compiling..."
set_title "Compiling module $module..."
use_compile_target=no
[ -f $KDESRCDIR/$module/Makefile.am.in ] && [ -n "$MAKE_OPTS_COMPILE" ] && [ -n "$USE_UNSERMAKE" ] \
&& ! (echo $NO_UNSERMAKE_MODULES | grep $module > /dev/null 2>&1) \
&& use_compile_target=yes
if [ "$use_compile_target" = yes ]; then
cmd_make="$MAKE $MAKE_OPTS_COMPILE"
else
cmd_make="$MAKE $MAKE_OPTS"
fi
[ $critical -eq 0 ] && cmd_make="$cmd_make -k"
[ "$NICECOMPILE" = yes ] && cmd_make="nice $cmd_make"
[ "$use_compile_target" = yes ] && cmd_make="$cmd_make compile"
log_section "Compilation $cmd_make"
log_cmd "$cmd_make"
retval=$?
if [ $retval -eq 0 ]; then
log_endsection "Compilation"
echo "$str_okay"
# Link the module
if [ "$use_compile_target" = yes ]; then
echo -n " Linking..."
set_title "Linking module $module..."
cmd_make="$MAKE $MAKE_OPTS"
[ $critical -eq 0 ] && cmd_make="$cmd_make -k"
[ "$NICECOMPILE" = yes ] && cmd_make="nice $cmd_make"
log_section "Linking $cmd_make"
log_cmd "$cmd_make"
retval=$?
if [ $retval -eq 0 ]; then
log_endsection "Linking"
echo "$str_okay"
fi
fi
fi
if [ $retval -eq 0 ]; then
# Install the module.
#
cmd_make_install="$MAKE $MAKE_OPTS"
[ $critical -eq 0 ] && cmd_make_install="$cmd_make_install -k"
[ "$NICECOMPILE" = yes ] && cmd_make_install="nice $cmd_make_install"
cmd_make_install="$cmd_make_install install"
if [ ! -w $TDEDIRS ]; then
eval "$cmd_sudo \"$cmd_make_install\""
else
install_module
fi
else
echo "$str_error"
# Attempt to display the actual error
grep -m1 -A2 ":[0-9]*: error:" $logfile
move_logfile "failed"
[ -n "$cmd_compress" ] && eval "$cmd_compress $logfile"
[ $critical -eq 0 ] || exit $err_compile_fail
fi
done
set_title "KDE build finished."
exit $err_no_error
=head1 NAME
kde-build - Updates and recompiles a tree of KDE modules
=head1 SYNOPSIS
kde-build
=head1 DESCRIPTION
kde-build has been designed to keep a local copy of several KDE
modules up to date and recompile them. Those modules have to be saved in a
common directory, e.g. something like
~/kde-src/
|
+-> tdelibs/
|
+-> tdebase/
|
\-> tdenetwork/
In this case, the KDE source directory would be ~/kde-src/. The script will
take care of compiling them in the correct order, checks for dependencies
and resolves them as far as possible.
Please note that, prior to first invocation of the script, the configuration
file 'F<kde-buildrc>' has to be modified to reflect the local environment,
such as paths etc.
=head1 RETURN VALUE
The following error codes are returned by the script.
0 - No error seems to have occured.
1 - The script could not change into the directory of a module.
2 - The script could not open the file 'Makefile.in' of a module.
3 - The configuration of a module failed.
4 - The compilation of a module failed.
5 - The installation of a module failed.
6 - An invalid source directory was specified.
7 - An invalid Qt directory was specified.
11 - The configuration file F<kde-buildrc> couldn't be loaded.
12 - Both CVS_CLEAN and INCREMENTAL_BUILD were set
13 - Both BUILD_CLEAN and INCREMENTAL_BUILD were set
=head1 EXAMPLES
cd ~/scripts/; vi ./kde-buildrc; ./kde-build
On Debian systems, an example F<kde-buildrc> can be found in
the directory /usr/share/doc/tdesdk-scripts/.
=head1 BUGS
Probably.
=head1 TODO
Add a DIAGNOSIS section to this man page.
=head1 AUTHOR
Frerich Raabe <raabe@kde.org>
=cut
# vim:et:ts=2:sw=2