You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
56 lines
2.1 KiB
56 lines
2.1 KiB
kdelirc
|
|
-------
|
|
|
|
KDELIRC is a KDE frontend for the Linux Infrared Remote Control system. It has
|
|
two aims:
|
|
|
|
1. Provide a control center module for configuration of:
|
|
a) Application bindings to remote control buttons.
|
|
b) Actual remote controls installed (i.e. lirc configuration).
|
|
|
|
2. Provide a system-tray applet to act as a proxy between the LIRC system and
|
|
KDE (applications), in order to launch DCOP requests (and potentially
|
|
other IPC signals) to applications (and potentially collect/display
|
|
results).
|
|
|
|
INSTALLATION
|
|
|
|
Nothing but the normal ./configure && make && su -c "make install".
|
|
|
|
SETUP
|
|
|
|
For the KDELirc system to work properly, you *must* have lircd configured and
|
|
running. If you have already had a Lirc program running, then you most likely
|
|
have Lirc set up properly. If not, be sure that you have a correct kernel module
|
|
loaded for your IR receiver (1) and that the lircd program is running (2).
|
|
|
|
You must also have some remote controls configured in "/etc/lircd.conf". Go to
|
|
the lircd website (www.lirc.org) for more information on this.
|
|
|
|
(1) /sbin/lsmod | grep lirc
|
|
If you see some output, you have a lirc kernel module loaded (that's not to say
|
|
it's the right module for your hardware).
|
|
|
|
(2) ps aux | grep -v grep | grep lircd
|
|
If you see some output, you have the lircd program running. This is good.
|
|
|
|
DESIGN
|
|
|
|
The design of the system is really quite simple---a control center module
|
|
modifies a centralised configuration file to determine what action(s) should
|
|
be taken on a remote control's button press.
|
|
|
|
The same(?) module also provides a front-end for the input of /etc/lircd.conf,
|
|
necessary to specify remote controls to the LIRC system. An extra (standard
|
|
format XML-based) may be provided with the remote control description to give
|
|
less sucky (lower case, no spaces/symbols) names.
|
|
|
|
The /etc/lircd.conf frontend has not yet been implemented, though all other
|
|
features are.
|
|
|
|
The system tray applet interfaces with LIRC in order to catch key presses on
|
|
remote controls. It is then able to communicate with and potentially start
|
|
applications through DCOP.
|
|
|
|
Gav Wood, 2003 (gav at kde dot org).
|