You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tdeutils/klaptopdaemon/warning.cpp

603 lines
23 KiB

/*
* warning.cpp
*
* Copyright (c) 1999 Paul Campbell <paul@taniwha.com>
*
* Requires the TQt widget libraries, available at no cost at
* http://www.troll.no/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include "warning.h"
#include "portable.h"
#include "version.h"
#include <klocale.h>
#include <kfiledialog.h>
#include <kmessagebox.h>
#include <kconfig.h>
#include <kurlrequester.h>
#include <kapplication.h>
#include <kcombobox.h>
#include <tqlayout.h>
#include <tqcheckbox.h>
#include <tqspinbox.h>
#include <tqslider.h>
#include <tqhbox.h>
#include <tqvbuttongroup.h>
#include <tqradiobutton.h>
#include <tqtooltip.h>
extern void wake_laptop_daemon();
WarningConfig::WarningConfig (int t, TQWidget * parent, const char *name)
: KCModule(parent, name),
checkSuspend(0),
checkStandby(0),
checkHibernate(0)
{
KGlobal::locale()->insertCatalogue("klaptopdaemon"); // For translation of klaptopdaemon messages
type = t;
apm = laptop_portable::has_power_management();
config = new KConfig("kcmlaptoprc");
my_load(0);
if (!apm) {
TQVBoxLayout *top_layout = new TQVBoxLayout( this, KDialog::marginHint(),
KDialog::spacingHint() );
KActiveLabel* explain = laptop_portable::no_power_management_explanation(this);
top_layout->addWidget(explain, 0);
top_layout->addStretch(1);
} else {
TQGridLayout *grid = new TQGridLayout( this, 11, 2, /* rows x cols */
KDialog::marginHint(),
KDialog::spacingHint() );
grid->setColStretch( 1, 1 );
int curRow = 0;
// setup the trigger stuff:
if (type) {
checkCriticalTime = new TQCheckBox( i18n("Critical &trigger:"), this );
checkCriticalPercent = new TQCheckBox( i18n("Critical &trigger:"), this );
editCriticalTime = new TQSpinBox(1, 60*24, 1, this);
editCriticalTime->setSuffix(i18n("keep short, unit in spinbox", "min"));
TQToolTip::add(editCriticalTime, i18n("When this amount of battery life is left the actions below will be triggered"));
editCriticalPercent = new TQSpinBox(1, 100, 1, this);
editCriticalPercent->setSuffix(i18n("keep short, unit in spinbox", "%"));
TQToolTip::add(editCriticalPercent, i18n("When this amount of battery life is left the actions below will be triggered"));
grid->addWidget(checkCriticalTime, curRow, 0);
grid->addWidget(editCriticalTime, curRow++, TQt::AlignLeft);
grid->addWidget(checkCriticalPercent, curRow, 0);
grid->addWidget(editCriticalPercent, curRow++, TQt::AlignLeft);
connect(editCriticalTime, TQT_SIGNAL(valueChanged(int)), this, TQT_SLOT(configChanged()));
connect(editCriticalPercent, TQT_SIGNAL(valueChanged(int)), this, TQT_SLOT(configChanged()));
connect(checkCriticalTime, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(configChanged()));
connect(checkCriticalPercent, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(configChanged()));
connect(checkCriticalTime, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(checkCriticalTimeChanged(bool)));
connect(checkCriticalPercent, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(checkCriticalPercentChanged(bool)));
} else {
checkLowTime = new TQCheckBox( i18n("Low &trigger:"), this );
checkLowPercent = new TQCheckBox( i18n("Low &trigger:"), this );
editLowTime = new TQSpinBox(1, 60*24, 1, this);
editLowTime->setSuffix(i18n("keep short, unit in spinbox", "min"));
TQToolTip::add(editLowTime, i18n("When this amount of battery life is left the actions below will be triggered"));
editLowPercent = new TQSpinBox(1, 100, 1, this);
editLowPercent->setSuffix(i18n("keep short, unit in spinbox", "%"));
TQToolTip::add(editLowPercent, i18n("When this amount of battery life is left the actions below will be triggered"));
grid->addWidget(checkLowTime, curRow, 0);
grid->addWidget(editLowTime, curRow++, TQt::AlignLeft);
grid->addWidget(checkLowPercent, curRow, 0);
grid->addWidget(editLowPercent, curRow++, TQt::AlignLeft);
connect(editLowTime, TQT_SIGNAL(valueChanged(int)), this, TQT_SLOT(configChanged()));
connect(editLowPercent, TQT_SIGNAL(valueChanged(int)), this, TQT_SLOT(configChanged()));
connect(checkLowTime, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(configChanged()));
connect(checkLowPercent, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(configChanged()));
connect(checkLowTime, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(checkLowTimeChanged(bool)));
connect(checkLowPercent, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(checkLowPercentChanged(bool)));
}
// setup the Run Command stuff
checkRunCommand = new TQCheckBox(i18n("Run &command:"), this);
grid->addWidget(checkRunCommand, curRow, 0);
editRunCommand = new KURLRequester( this );
editRunCommand->setEnabled(false);
connect( checkRunCommand, TQT_SIGNAL(toggled(bool)),
editRunCommand, TQT_SLOT(setEnabled(bool)) );
connect( checkRunCommand, TQT_SIGNAL(clicked()),
this, TQT_SLOT(configChanged()) );
connect( editRunCommand, TQT_SIGNAL(textChanged(const TQString&)),
this, TQT_SLOT(configChanged()) );
grid->addWidget(editRunCommand, curRow++, 1);
TQToolTip::add( editRunCommand, i18n( "This command will be run when the battery gets low" ) );
// setup the Play Sound stuff
checkPlaySound = new TQCheckBox(i18n("&Play sound:"), this);
grid->addWidget(checkPlaySound, curRow, 0);
editPlaySound = new KURLRequester( this );
editPlaySound->setEnabled(false);
connect( checkPlaySound, TQT_SIGNAL(toggled(bool)),
editPlaySound, TQT_SLOT(setEnabled(bool)) );
connect( checkPlaySound, TQT_SIGNAL(clicked()),
this, TQT_SLOT(configChanged()) );
connect( editPlaySound, TQT_SIGNAL(textChanged(const TQString&)),
this, TQT_SLOT(configChanged()) );
grid->addWidget(editPlaySound, curRow++, 1);
TQToolTip::add( editPlaySound, i18n( "This sound will play when the battery gets low" ) );
// setup the System Sound stuff
checkBeep = new TQCheckBox(i18n("System &beep"), this);
grid->addWidget(checkBeep, curRow++, 0);
connect(checkBeep, TQT_SIGNAL(clicked()), this, TQT_SLOT(configChanged()));
TQToolTip::add( checkBeep, i18n( "The system will beep if this is enabled" ) );
checkNotify = new TQCheckBox(i18n("&Notify"), this);
grid->addWidget(checkNotify, curRow++, 0);
connect(checkNotify, TQT_SIGNAL(clicked()), this, TQT_SLOT(configChanged()));
int can_suspend = laptop_portable::has_suspend();
int can_standby = laptop_portable::has_standby();
int can_hibernate = laptop_portable::has_hibernation();
int can_brightness = laptop_portable::has_brightness();
if (can_brightness) {
checkBrightness = new TQCheckBox(i18n("Panel b&rightness"), this);
checkBrightness->setMinimumSize(checkBrightness->sizeHint());
TQToolTip::add( checkBrightness, i18n( "If enabled the back panel brightness will change" ) );
grid->addWidget(checkBrightness, curRow, 0);
connect(checkBrightness, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(brightness_changed(bool)));
TQHBoxLayout *v = new TQHBoxLayout();
v->addWidget(new TQLabel("-", this));
valueBrightness = new TQSlider(0, 255, 16, 160, Qt::Horizontal, this);
TQToolTip::add( valueBrightness, i18n( "How bright or dim to make the back panel" ) );
valueBrightness->setMaximumWidth(70);
v->addWidget(valueBrightness);
v->addWidget(new TQLabel("+", this));
v->addStretch(1);
grid->addLayout(v, curRow, 1);
valueBrightness->setEnabled(0);
connect(valueBrightness, TQT_SIGNAL(valueChanged(int)), this, TQT_SLOT(configChanged()));
++curRow;
} else {
checkBrightness = 0;
valueBrightness = 0;
}
TQStringList performance_list;
int current_performance;
bool *active_list;
bool has_performance = laptop_portable::get_system_performance(0, current_performance, performance_list, active_list);
if (has_performance) {
performance = new TQCheckBox(i18n("System performance"), this);
TQToolTip::add( performance, i18n( "If enabled the laptop's power performance profile will change" ) );
grid->addWidget(performance, curRow, 0);
connect (performance, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(performance_changed(bool)));
TQHBoxLayout *v = new TQHBoxLayout();
performance_val = new KComboBox(0, this);
performance_val->insertStringList(performance_list);
performance_val->setEnabled(0);
connect (performance_val, TQT_SIGNAL(activated(int)), this, TQT_SLOT(configChanged()));
TQToolTip::add( performance_val, i18n( "The performance profile to change to" ) );
v->addWidget(performance_val);
v->addStretch(1);
grid->addLayout(v, curRow, 1);
++curRow;
} else {
performance = 0;
performance_val = 0;
}
TQStringList throttle_list;
int current_throttle;
bool has_throttle = laptop_portable::get_system_throttling(0, current_throttle, throttle_list, active_list);
if (has_throttle) {
throttle = new TQCheckBox(i18n("CPU throttling"), this);
TQToolTip::add( throttle, i18n( "If enabled the CPU performance will be throttled" ) );
grid->addWidget(throttle, curRow, 0);
connect (throttle, TQT_SIGNAL(toggled(bool)), this, TQT_SLOT(throttle_changed(bool)));
TQHBoxLayout *v = new TQHBoxLayout();
throttle_val = new KComboBox(0, this);
throttle_val->insertStringList(throttle_list);
throttle_val->setEnabled(0);
connect (throttle_val, TQT_SIGNAL(activated(int)), this, TQT_SLOT(configChanged()));
TQToolTip::add( throttle_val, i18n( "How much to throttle the CPU performance by" ) );
v->addWidget(throttle_val);
v->addStretch(1);
grid->addLayout(v, curRow, 1);
++curRow;
} else {
throttle = 0;
throttle_val = 0;
}
TQVButtonGroup *b = new TQVButtonGroup(i18n("System State Change"), this);
TQToolTip::add( b, i18n( "You may choose one of the following to occur when the battery gets low" ) );
b->layout()->setSpacing( KDialog::spacingHint() );
if (can_standby) {
checkStandby = new TQRadioButton(i18n("Standb&y"), b);
TQToolTip::add( checkStandby, i18n( "Move the system into the standby state - a temporary lower power state" ) );
checkStandby->setMinimumSize(checkStandby->sizeHint());
connect(checkStandby, TQT_SIGNAL(clicked()), this, TQT_SLOT(configChanged()));
}
if (can_suspend) {
checkSuspend = new TQRadioButton(i18n("&Suspend"), b);
TQToolTip::add( checkSuspend, i18n( "Move the system into the suspend state - also known as 'save-to-ram'" ) );
checkSuspend->setMinimumSize(checkSuspend->sizeHint());
connect(checkSuspend, TQT_SIGNAL(clicked()), this, TQT_SLOT(configChanged()));
}
if (can_hibernate) {
checkHibernate = new TQRadioButton(i18n("H&ibernate"), b);
TQToolTip::add( checkHibernate, i18n( "Move the system into the hibernate state - also known as 'save-to-disk'" ) );
checkHibernate->setMinimumSize(checkHibernate->sizeHint());
connect(checkHibernate, TQT_SIGNAL(clicked()), this, TQT_SLOT(configChanged()));
}
// setup the logout option
checkLogout = new TQRadioButton(i18n("&Logout"), b);
connect(checkLogout, TQT_SIGNAL(clicked()), this, TQT_SLOT(configChanged()));
// setup the shutdown option
checkShutdown = new TQRadioButton(i18n("System power off"), b);
TQToolTip::add( checkShutdown, i18n( "Power the laptop off" ) );
connect(checkShutdown, TQT_SIGNAL(clicked()), this, TQT_SLOT(configChanged()));
checkNone = new TQRadioButton(i18n("&None"), b);
connect(checkNone, TQT_SIGNAL(clicked()), this, TQT_SLOT(configChanged()));
grid->addMultiCellWidget(b, curRow, curRow, 0, 1, TQt::AlignLeft|TQt::AlignTop);
curRow++;
TQLabel* explain;
if (type) {
explain = new TQLabel(i18n("This panel controls how and when you receive warnings that your battery power is going to run out VERY VERY soon."), this);
} else {
explain = new TQLabel(i18n("This panel controls how and when you receive warnings that your battery power is about to run out"), this);
}
explain->setAlignment( TQt::WordBreak );
grid->addMultiCellWidget(explain, curRow, curRow, 0, 1);
++curRow;
if (!can_suspend && !can_standby && !can_hibernate) {
// display help text:
TQLabel* note = laptop_portable::how_to_do_suspend_resume(this);
grid->addMultiCellWidget(note, curRow, curRow, 0, 1);
++curRow;
}
grid->setRowStretch(curRow++, 1);
grid->addWidget(new TQLabel( i18n("Version: %1").arg(LAPTOP_VERSION), this),
curRow, 1, TQt::AlignRight);
}
my_load(1);
}
WarningConfig::~WarningConfig()
{
delete config;
}
void WarningConfig::brightness_changed(bool v)
{
valueBrightness->setEnabled(v);
configChanged();
}
void WarningConfig::throttle_changed(bool v)
{
throttle_val->setEnabled(v);
configChanged();
}
void WarningConfig::performance_changed(bool v)
{
performance_val->setEnabled(v);
configChanged();
}
void WarningConfig::checkLowTimeChanged(bool state)
{
checkLowPercent->setChecked(state ? false : true);
editLowPercent->setEnabled(state ? false : true);
}
void WarningConfig::checkLowPercentChanged(bool state)
{
checkLowTime->setChecked(state ? false : true);
editLowTime->setEnabled(state ? false : true);
}
void WarningConfig::checkCriticalTimeChanged(bool state)
{
checkCriticalPercent->setChecked(state ? false : true);
editCriticalPercent->setEnabled(state ? false : true);
}
void WarningConfig::checkCriticalPercentChanged(bool state)
{
checkCriticalTime->setChecked(state ? false: true);
editCriticalTime->setEnabled(state ? false : true);
}
void WarningConfig::save()
{
if (apm) {
runcommand = checkRunCommand->isChecked();
playsound = checkPlaySound->isChecked();
logout = checkLogout->isChecked();
shutdown = checkShutdown->isChecked();
beep = checkBeep->isChecked();
notify = checkNotify->isChecked();
do_suspend = (checkSuspend? checkSuspend->isChecked() : false);
do_standby = (checkStandby? checkStandby->isChecked() : false);
do_hibernate = (checkHibernate? checkHibernate->isChecked() : false);
do_brightness = (checkBrightness? checkBrightness->isChecked() : false);
val_brightness = (valueBrightness? valueBrightness->value() : 255);
do_performance = (performance? performance->isChecked() : false);
val_performance = (performance_val? performance_val->currentText() : "");
do_throttle = (throttle? throttle->isChecked() : false);
val_throttle = (throttle_val? throttle_val->currentText() : "");
runcommand_val = editRunCommand->url();
if (type) {
time_based_action_critical = checkCriticalTime->isChecked();
critical_val_time = editCriticalTime->value();
critical_val_percent = editCriticalPercent->value();
} else {
time_based_action_low = checkLowTime->isChecked();
low_val_time = editLowTime->value();
low_val_percent = editLowPercent->value();
}
sound_val = editPlaySound->url();
}
config->setGroup((type?"BatteryCritical":"BatteryLow"));
if (config->group() == "BatteryLow") {
config->writeEntry("TimeBasedAction", time_based_action_low);
config->writeEntry("LowValTime", low_val_time);
config->writeEntry("LowValPercent", low_val_percent);
} else {
config->writeEntry("TimeBasedAction", time_based_action_critical);
config->writeEntry("CriticalValTime", critical_val_time);
config->writeEntry("CriticalValPercent", critical_val_percent);
}
config->writeEntry("RunCommand", runcommand);
config->writeEntry("PlaySound", playsound);
config->writeEntry("Logout", logout);
config->writeEntry("Shutdown", shutdown);
config->writeEntry("SystemBeep", beep);
config->writeEntry("Notify", notify);
config->writeEntry("Suspend", do_suspend);
config->writeEntry("Standby", do_standby);
config->writeEntry("Hibernate", do_hibernate);
config->writeEntry("Brightness", do_brightness);
config->writeEntry("BrightnessValue", val_brightness);
config->writeEntry("Performance", do_performance);
config->writeEntry("PerformanceValue", val_performance);
config->writeEntry("Throttle", do_throttle);
config->writeEntry("ThrottleValue", val_throttle);
config->writeEntry("RunCommandPath", runcommand_val);
config->writeEntry("PlaySoundPath", sound_val);
config->sync();
wake_laptop_daemon();
}
void WarningConfig::load()
{
load( false );
}
void WarningConfig::load(bool useDefaults)
{
if (config == NULL)
return;
my_load(0, useDefaults);
my_load(1, useDefaults);
}
void WarningConfig::my_load(int x, bool useDefaults )
{
config->setReadDefaults( useDefaults );
// open the config file
if (!x) {
config->setGroup((type?"BatteryCritical":"BatteryLow"));
if (config->group() == "BatteryLow") {
time_based_action_low = config->readBoolEntry("TimeBasedAction", true);
low_val_time = config->readNumEntry("LowValTime", 15);
low_val_percent = config->readNumEntry("LowValPercent", 7);
} else {
time_based_action_critical = config->readBoolEntry("TimeBasedAction", true);
critical_val_time = config->readNumEntry("CriticalValTime", 5);
critical_val_percent = config->readNumEntry("CriticalValPercent", 3);
}
runcommand = config->readBoolEntry("RunCommand", false);
playsound = config->readBoolEntry("PlaySound", false);
logout = config->readBoolEntry("Logout", false);
shutdown = config->readBoolEntry("Shutdown", false);
beep = config->readBoolEntry("SystemBeep", true);
notify = config->readBoolEntry("Notify", (type && checkSuspend ? false : true));
do_suspend = config->readBoolEntry("Suspend", (type && checkSuspend ? true :false));
do_standby = config->readBoolEntry("Standby", false);
do_hibernate = config->readBoolEntry("Hibernate", false);
do_brightness = config->readBoolEntry("Brightness", false);
val_brightness = config->readNumEntry("BrightnessValue", 255);
do_performance = config->readBoolEntry("Performance", false);
val_performance = config->readEntry("PerformanceValue", "");
do_throttle = config->readBoolEntry("Throttle", false);
val_throttle = config->readEntry("ThrottleValue", "");
runcommand_val = config->readEntry("RunCommandPath");
sound_val = config->readEntry("PlaySoundPath");
have_time = config->readNumEntry("HaveTime", 2);
if (laptop_portable::has_power_management())
have_time = laptop_portable::has_battery_time();
} else
if (apm) {
checkRunCommand->setChecked(runcommand);
checkPlaySound->setChecked(playsound);
checkBeep->setChecked(beep);
if (checkBrightness)
checkBrightness->setChecked(do_brightness);
if (valueBrightness) {
valueBrightness->setValue(val_brightness);
valueBrightness->setEnabled(do_brightness);
}
if (performance)
performance->setChecked(do_performance);
if (performance_val) {
int ind = 0;
for (int i = 0; i < performance_val->count(); i++)
if (performance_val->text(i) == val_performance) {
ind = i;
break;
}
performance_val->setCurrentItem(ind);
performance_val->setEnabled(do_performance);
}
if (throttle)
throttle->setChecked(do_throttle);
if (throttle_val) {
int ind = 0;
for (int i = 0; i < throttle_val->count(); i++)
if (throttle_val->text(i) == val_throttle) {
ind = i;
break;
}
throttle_val->setCurrentItem(ind);
throttle_val->setEnabled(do_throttle);
}
checkLogout->setChecked(logout);
checkNotify->setChecked(notify);
checkShutdown->setChecked(shutdown);
if (checkHibernate) {
checkHibernate->setChecked(do_hibernate);
} else {
do_hibernate = 0;
}
if (checkStandby) {
checkStandby->setChecked(do_standby);
} else {
do_standby = 0;
}
if (checkSuspend) {
checkSuspend->setChecked(do_suspend);
} else {
do_suspend = 0;
}
checkNone->setChecked(!do_suspend&!do_standby&!do_hibernate&!logout&!shutdown);
editRunCommand->setURL(runcommand_val);
if(type) {
checkCriticalTime->setChecked(time_based_action_critical ? true : false);
editCriticalTime->setValue(critical_val_time);
checkCriticalPercent->setChecked(time_based_action_critical ? false : true);
editCriticalPercent->setValue(critical_val_percent);
} else {
checkLowTime->setChecked(time_based_action_low ? true : false);
editLowTime->setValue(low_val_time);
checkLowPercent->setChecked(time_based_action_low ? false : true);
editLowPercent->setValue(low_val_percent);
}
editPlaySound->setURL(sound_val);
}
emit changed(useDefaults);
}
void WarningConfig::defaults()
{
load( true );
}
void WarningConfig::configChanged()
{
emit changed(true);
}
#if 0
void WarningConfig::enableRunCommand(bool enable)
{
editRunCommand->setEnabled(enable);
buttonBrowseRunCommand->setEnabled(enable);
configChanged();
}
void WarningConfig::enablePlaySound(bool enable)
{
editPlaySound->setEnabled(enable);
buttonBrowsePlaySound->setEnabled(enable);
configChanged();
}
void WarningConfig::browseRunCommand()
{
KURL url = KFileDialog::getOpenURL(TQString(), TQString(), this );
if( url.isEmpty() )
return;
if( !url.isLocalFile() )
{
KMessageBox::sorry( 0L, i18n( "Only local files are currently supported." ) );
return;
}
editRunCommand->setText( url.path() );
configChanged();
}
void WarningConfig::browsePlaySound()
{
KURL url = KFileDialog::getOpenURL(TQString(), TQString(), this );
if( url.isEmpty() )
return;
if( !url.isLocalFile() )
{
KMessageBox::sorry( 0L, i18n( "Only local files are currently supported." ) );
return;
}
editPlaySound->setText( url.path() );
configChanged();
}
#endif
TQString WarningConfig::quickHelp() const
{
return i18n("<h1>Low battery Warning</h1>This module allows you to "
"set an alarm in case your battery's charge is about to run out.");
}
#include "warning.moc"