You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tellico/configure.in

724 lines
22 KiB

dnl =======================================================
dnl FILE: ./admin/configure.in.min
dnl =======================================================
dnl This file is part of the KDE libraries/packages
dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
dnl This file is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Library General Public
dnl License as published by the Free Software Foundation; either
dnl version 2 of the License, or (at your option) any later version.
dnl This library is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl Library General Public License for more details.
dnl You should have received a copy of the GNU Library General Public License
dnl along with this library; see the file COPYING.LIB. If not, write to
dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifh Floor,
dnl Boston, MA 02110-1301, USA.
# Original Author was Kalle@kde.org
# I lifted it in some mater. (Stephan Kulow)
# I used much code from Janos Farkas
dnl Process this file with autoconf to produce a configure script.
AC_INIT(acinclude.m4) dnl a source file from your sub dir
dnl This is so we can use kde-common
AC_CONFIG_AUX_DIR(admin)
dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
unset CDPATH
dnl Checking host/target/build systems, for make, install etc.
AC_CANONICAL_SYSTEM
dnl Perform program name transformation
AC_ARG_PROGRAM
dnl Automake doc recommends to do this only here. (Janos)
AM_INIT_AUTOMAKE(tellico, 1.3.2.1) dnl searches for some needed programs
KDE_SET_PREFIX
dnl generate the config header
AM_CONFIG_HEADER(config.h) dnl at the distribution this done
dnl Checks for programs.
AC_CHECK_COMPILERS
AC_ENABLE_SHARED(yes)
AC_ENABLE_STATIC(no)
KDE_PROG_LIBTOOL
dnl for NLS support. Call them in this order!
dnl WITH_NLS is for the po files
AM_KDE_WITH_NLS
KDE_USE_QT(3.3)
AC_PATH_KDE
dnl =======================================================
dnl FILE: configure.in.in
dnl =======================================================
#MIN_CONFIG(3.3)
dnl PACKAGE set before
dnl AM_KDE_MIN_VERSION(MIN-VERSION-MAJOR, MIN-VERSION-MINOR, MIN-VERSION-MICRO)
dnl (taken from KMyMoney2)
dnl
AC_DEFUN([AM_KDE_MIN_VERSION],
[
AC_MSG_CHECKING([for KDE version $1.$2.$3 or later])
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$CXXFLAGS -I$srcdir $all_includes"
AC_TRY_COMPILE([
#include "tdeversion.h"
#if !( KDE_IS_VERSION( $1, $2, $3 ) )
#error KDE version does not meet minimum requirement
#endif
], [], AC_MSG_RESULT(yes), AC_MSG_ERROR(no))
CXXFLAGS=$save_CXXFLAGS
AC_LANG_RESTORE
])
AM_KDE_MIN_VERSION(3,3,1)
dnl CXXFLAGS="$NOOPT_CXXFLAGS" dnl __tdevelop[noopt]__
dnl CFLAGS="$NOOPT_CFLAGS" dnl __tdevelop[noopt]__
dnl CXXFLAGS="$CXXFLAGS $USE_EXCEPTIONS -DQT_NO_ASCII_CAST -DQT_NO_TRANSLATION" dnl __tdevelop[exc]__
dnl KDE_NEED_FLEX dnl __tdevelop__
dnl AC_PROG_YACC dnl __tdevelop__
AC_MSG_CHECKING(for ushort in <sys/types.h>)
AC_CACHE_VAL(bt_cv_type_ushort, [
AC_TRY_COMPILE([
#include <sys/types.h>
],[
ushort i;
], bt_cv_type_ushort=yes, bt_cv_type_ushort=no)])
AC_MSG_RESULT($bt_cv_type_ushort)
if test "$bt_cv_type_ushort" = "yes" ; then
AC_DEFINE(HAVE_USHORT, 1, [Define if ushort is defined in <sys/types.h>])
fi
AC_MSG_CHECKING(for boolean in <sys/types.h>)
AC_CACHE_VAL(bt_cv_type_boolean, [
AC_TRY_COMPILE([
#include <sys/types.h>
],[
boolean f;
], bt_cv_type_boolean=yes, bt_cv_type_boolean=no)])
AC_MSG_RESULT($bt_cv_type_boolean)
if test "$bt_cv_type_boolean" = "yes" ; then
AC_DEFINE(HAVE_BOOLEAN, 1, [Define if boolean is defined in <sys/types.h>])
fi
AC_MSG_CHECKING(for strdup declaration in <string.h>)
AC_EGREP_HEADER([strdup *\(], string.h, bt_cv_decl_strdup=yes, bt_cv_decl_strdup=no)
AC_MSG_RESULT($bt_cv_decl_strdup)
if test "$bt_cv_decl_strdup" = "yes" ; then
AC_DEFINE(HAVE_STRDUP_DECL, 1, [Define if strdup is declared in <string.h>])
fi
dnl Checks for library functions.
AC_FUNC_ALLOCA
AC_FUNC_VPRINTF
AC_CHECK_FUNCS(strlwr strupr)
AC_CHECK_SIZEOF(unsigned int, 4)
AC_CHECK_SIZEOF(unsigned short, 2)
AC_CHECK_SIZEOF(unsigned char, 1)
AC_CHECK_SIZEOF(char, 1)
AC_CACHE_CHECK([for std::vector::at(std::size_t)],
ac_cv_cxx_have_vector_at, [
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
AC_TRY_COMPILE([
#include <vector>
],[
std::vector<int> v(1);
v.at(0);
return 0;
],ac_cv_cxx_have_vector_at=yes, ac_cv_cxx_have_vector_at=no)
AC_LANG_RESTORE
])
if test "$ac_cv_cxx_have_vector_at" = "yes"; then
AC_DEFINE(HAVE_VECTOR_AT,1,[Define if you have the 'std::vector::at(std::size_t)' function])
fi
KDE_FIND_PATH(xml2-config, XML_CONFIG, [${prefix}/bin ${exec_prefix}/bin /usr/bin /usr/local/bin /opt/local/bin], [
AC_MSG_ERROR([[Could not find xml2-config anywhere, check ftp://xmlsoft.org/ for libxml >= 2.6.0. If you are using pre-packaged libraries, be sure to have the development files installed as well, which may be called libxml2-devel or something similar.]])
])
if test -n "$XML_CONFIG"; then
vers=`$XML_CONFIG --version 2>/dev/null | sed -e 's/libxml //' | awk 'BEGIN { FS = "."; } { printf "%d", ($1 * 1000 + $2) * 1000 + $3;}'`
if test -n "$vers" && test "$vers" -ge 2006000
then
LIBXML_LIBS="`$XML_CONFIG --libs`"
LIBXML_RPATH=
for args in $LIBXML_LIBS; do
case $args in
-L*)
LIBXML_RPATH="$LIBXML_RPATH $args"
;;
esac
done
LIBXML_RPATH=`echo $LIBXML_RPATH | sed -e "s/-L/-R/g"`
LIBXML_CFLAGS="`$XML_CONFIG --cflags`"
else
AC_MSG_ERROR([[You need at least libxml 2.6.0.]])
fi
fi
AC_SUBST(LIBXML_LIBS)
AC_SUBST(LIBXML_CFLAGS)
AC_SUBST(LIBXML_RPATH)
AC_ARG_WITH([xml-catalog],
AC_HELP_STRING([--with-xml-catalog=CATALOG],
[path to XML catalog, default=without-xml-catalog]),,
[with_xml_catalog=no])
if test x"$with_xml_catalog" != xno; then
KDE_FIND_PATH(xmlcatalog, XMLCATALOG, [${prefix}/bin ${exec_prefix}/bin /usr/bin /usr/local/bin /opt/local/bin], [
AC_MSG_ERROR([[Could not find xmlcatalog anywhere, check ftp://xmlsoft.org/ for libxml2 >= 2.4.23. If you are using pre-packaged libraries, be sure to have the utility files installed as well, which may be called libxml2-utils or something similar.]])
])
AC_SUBST(XMLCATALOG)
if test x"$with_xml_catalog" = xyes; then
XML_CATALOG_FILE="/etc/xml/catalog"
else
XML_CATALOG_FILE="$with_xml_catalog"
fi
AC_MSG_CHECKING([for XML catalog])
if test -f "$XML_CATALOG_FILE"; then
AC_MSG_RESULT([$XML_CATALOG_FILE])
else
AC_MSG_ERROR([$XML_CATALOG_FILE not found])
fi
AC_SUBST(XML_CATALOG_FILE)
fi
KDE_FIND_PATH(xslt-config, XSLT_CONFIG, [${prefix}/bin ${exec_prefix}/bin /usr/bin /usr/local/bin /opt/local/bin], [
AC_MSG_ERROR([[Could not find xslt-config anywhere, check ftp://xmlsoft.org/ for libxslt >= 1.0.19. If you are using pre-packaged libraries, be sure to have the development files installed as well, which may be called libxslt-devel or something similar.]])
])
if test -n "$XSLT_CONFIG"; then
vers=`$XSLT_CONFIG --version 2>/dev/null | awk 'BEGIN { FS = "."; } { printf "%d", ($1 * 1000 + $2) * 1000 + $3;}'`
if test -n "$vers" && test "$vers" -ge 1000019; then
LIBXSLT_LIBS="`$XSLT_CONFIG --libs`"
LIBXSLT_RPATH=
for args in $LIBXSLT_LIBS; do
case $args in
-L*)
LIBXSLT_RPATH="$LIBXSLT_RPATH $args"
;;
esac
done
LIBXSLT_RPATH=`echo $LIBXSLT_RPATH | sed -e "s/-L/-R/g"`
LIBXSLT_CFLAGS="`$XSLT_CONFIG --cflags`"
else
AC_MSG_ERROR([[You need at least libxslt 1.0.19.]])
fi
fi
AC_SUBST(LIBXSLT_LIBS)
AC_SUBST(LIBXSLT_CFLAGS)
AC_SUBST(LIBXSLT_RPATH)
dnl ---------- TAGLIB CHECK ----------
AC_DEFUN([AC_HAVE_TAGLIB],
[
AC_DEFINE(HAVE_TAGLIB, 1, [Define to 1 if you have the TagLib library])
TAGLIB_CFLAGS=[`$TAGLIB_CONFIG --cflags`]
TAGLIB_LIBS=[`$TAGLIB_CONFIG --libs`]
TAGLIB_RPATH=
for args in $TAGLIB_LIBS; do
case $args in
-L*)
TAGLIB_RPATH="$TAGLIB_RPATH $args"
;;
esac
done
TAGLIB_RPATH=`echo $TAGLIB_RPATH | sed -e "s/-L/-R/g"`
])
AC_DEFUN([AC_NO_TAGLIB],
[
TAGLIB_CFLAGS=""
TAGLIB_LIBS=""
TAGLIB_RPATH=""
])
KDE_FIND_PATH(taglib-config, TAGLIB_CONFIG, [${prefix}/bin ${exec_prefix}/bin /usr/bin /usr/local/bin /opt/local/bin])
if test -n "$TAGLIB_CONFIG"; then
AC_HAVE_TAGLIB
else
AC_NO_TAGLIB
fi
AC_SUBST(TAGLIB_CFLAGS)
AC_SUBST(TAGLIB_LIBS)
AC_SUBST(TAGLIB_RPATH)
dnl ---------- END TAGLIB CHECK ----------
dnl ---------- YAZ CHECK ----------
AC_DEFUN([AC_HAVE_YAZ],
[
AC_DEFINE(HAVE_YAZ, 1, [Define to 1 if you have the yaz library])
YAZ_CFLAGS=[`$YAZ_CONFIG --cflags`]
YAZ_LIBS=[`$YAZ_CONFIG --libs`]
YAZ_RPATH=
for args in $YAZ_LIBS; do
case $args in
-L*)
YAZ_RPATH="$YAZ_RPATH $args"
;;
esac
done
YAZ_RPATH=`echo $YAZ_RPATH | sed -e "s/-L/-R/g"`
])
AC_DEFUN([AC_NO_YAZ],
[
YAZ_CFLAGS=""
YAZ_LIBS=""
YAZ_RPATH=""
])
KDE_FIND_PATH(yaz-config, YAZ_CONFIG, [${prefix}/bin ${exec_prefix}/bin /usr/bin /usr/local/bin /opt/local/bin])
if test -n "$YAZ_CONFIG"; then
AC_HAVE_YAZ
else
AC_NO_YAZ
fi
AC_SUBST(YAZ_CFLAGS)
AC_SUBST(YAZ_LIBS)
AC_SUBST(YAZ_RPATH)
dnl ---------- END YAZ CHECK ----------
dnl ---------- KCDDB CHECK ----------
AC_ARG_ENABLE(libkcddb,
AC_HELP_STRING([--disable-libkcddb], [disable libkcddb, default=enable if found]),
[enable_libkcddb=$enableval],
[enable_libkcddb=yes]
)
if test x$enable_libkcddb = xyes; then
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
ac_save_libs="$LIBS"
ac_save_cxxflags="$CXXFLAGS"
LIBS="$LIBS $all_libraries -lkcddb"
CXXFLAGS="$CXXFLAGS $all_includes"
AC_MSG_CHECKING(for libkcddb library and headers)
AC_TRY_LINK(
[
#ifdef QT_NO_CAST_ASCII
#undef QT_NO_CAST_ASCII
#endif
#include <libkcddb/cddb.h>
],
[KCDDB::CDDB c],
[kcddb=yes],
[kcddb=no]
)
AC_MSG_RESULT($kcddb)
LIBS="$ac_save_libs"
CXXFLAGS="$ac_save_cxxflags"
AC_LANG_RESTORE
if test x$kcddb = xyes; then
AC_DEFINE(HAVE_KCDDB, 1, [Define to 1 if you have libkcddb])
KCDDB_LIBS="-lkcddb"
else
KCDDB_LIBS=
fi
dnl -- kcddb was disabled ---
else
KCDDB_LIBS=
fi
AC_SUBST(KCDDB_LIBS)
dnl ---------- END KCDDB CHECK ----------
dnl ---------- KCAL CHECK ----------
AC_ARG_ENABLE(libkcal,
AC_HELP_STRING([--disable-libkcal], [disable libkcal, default=enable if found]),
[enable_libkcal=$enableval],
[enable_libkcal=yes]
)
if test x$enable_libkcal = xyes; then
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
ac_save_libs="$LIBS"
ac_save_cxxflags="$CXXFLAGS"
LIBS="$LIBS $all_libraries -lkcal"
CXXFLAGS="$CXXFLAGS $all_includes"
AC_MSG_CHECKING(for libkcal library and headers)
AC_TRY_LINK(
[
#ifdef QT_NO_CAST_ASCII
#undef QT_NO_CAST_ASCII
#endif
#include <libkcal/todo.h>
],
[KCal::Todo t],
[kcal=yes],
[kcal=no]
)
AC_MSG_RESULT($kcal)
LIBS="$ac_save_libs"
CXXFLAGS="$ac_save_cxxflags"
AC_LANG_RESTORE
if test x$kcal = xyes; then
AC_DEFINE(HAVE_KCAL, 1, [Define to 1 if you have libkcal])
KCAL_LIBS="-lkcal"
else
KCAL_LIBS=
fi
dnl -- libkcal was disabled ---
else
KCAL_LIBS=
fi
AC_SUBST(KCAL_LIBS)
dnl ---------- END KCAL CHECK ----------
AC_ARG_WITH([btparse],
AC_HELP_STRING([--with-btparse], [Link against libbtparse
as a shared lib (shared) or build it statically (static), default=static]),
[case "${withval}" in
shared) btparse=shared ;;
static) btparse=static ;;
yes) btparse=shared ;;
*) AC_MSG_ERROR(bad value ${withval} for --with-btparse) ;;
esac],
[btparse=static])
AM_CONDITIONAL(USE_LIBBTPARSE, test x$btparse = xshared)
if test x$btparse = xshared; then
KDE_CHECK_LIB(btparse, bt_initialize, [], [AC_MSG_ERROR(could not find libbtparse)])
fi
dnl ---------- AMAZON CHECK ----------
AC_ARG_ENABLE(amazon,
AC_HELP_STRING([--disable-amazon], [disable Amazon.com searching, default=enable]),
[enable_amazon=$enableval],
[enable_amazon=yes]
)
if test x$enable_amazon = xyes; then
AC_DEFINE(AMAZON_SUPPORT, 1, [Define to 1 if Amazon.com searching should be enabled])
fi
dnl ---------- END AMAZON CHECK ----------
dnl ---------- IMDB CHECK ----------
AC_ARG_ENABLE(imdb,
AC_HELP_STRING([--disable-imdb], [disable IMDb searching, default=enable]),
[enable_imdb=$enableval],
[enable_imdb=yes]
)
if test x$enable_imdb = xyes; then
AC_DEFINE(IMDB_SUPPORT, 1, [Define to 1 if IMDb searching should be enabled])
fi
dnl ---------- END IMDB CHECK ----------
dnl ---------- CDTEXT CHECK ----------
dnl Not sure if my code for CDText works on all platforms, allow disabling
AC_ARG_ENABLE(cdtext,
AC_HELP_STRING([--disable-cdtext], [disable cdtext, default=enable (Linux only)]),
[enable_cdtext=$enableval],
[enable_cdtext=yes]
)
if test x$enable_cdtext = xyes; then
AC_DEFINE(USE_CDTEXT, 1, [Define to 1 if you want to compile CD-Text support])
fi
dnl ---------- OpenOffice.org CHECK ----------
AC_ARG_ENABLE(ooo,
AC_HELP_STRING([--enable-ooo], [enable support for OpenOffice.org, default=disable]),
[enable_ooo=$enableval],
[enable_ooo=no]
)
AM_CONDITIONAL(WITH_OOO, test x$enable_ooo = xyes)
dnl Options: OpenOffice.org installation
AC_ARG_WITH([ooo-dir],
AC_HELP_STRING([--with-ooo-dir=DIR],
[where the OpenOffice.org program files are installed]),
[ac_ooo_libdir="${withval}/program"
ac_ooo_datadir="${withval}/program"])
AC_ARG_WITH([ooo-libdir],
AC_HELP_STRING([--with-ooo-libdir=DIR],
[where the OpenOffice.org program libraries are installed (<ooo-dir>/program)]),
[ac_ooo_libdir="${withval}"])
AC_ARG_WITH([ooo-datadir],
AC_HELP_STRING([--with-ooo-datadir=DIR],
[where the OpenOffice.org data files are installed (<ooo-dir>/program)]),
[ac_ooo_datadir="${withval}"])
dnl Options: OpenOffice.org SDK
AC_ARG_WITH([ooo-sdk-dir],
AC_HELP_STRING([--with-ooo-sdk-dir=DIR],
[where the OpenOffice.org SDK is installed]),
[ac_ooo_sdk_bindir="${withval}/linux/bin"
ac_ooo_sdk_includes="${withval}/include"])
AC_ARG_WITH([ooo-sdk-bindir],
AC_HELP_STRING([--with-ooo-sdk-bindir=DIR],
[where the OpenOffice.org SDK binaries are installed (<ooo-sdk-dir>/linux/bin)]),
[ac_ooo_sdk_bindir="${withval}"])
AC_ARG_WITH([ooo-sdk-includes],
AC_HELP_STRING([--with-ooo-sdk-includes=DIR],
[where the OpenOffice.org SDK includes are installed (<ooo-sdk-dir>/include)]),
[ac_ooo_sdk_includes="${withval}"])
if test x$enable_ooo = xyes; then
dnl Check for UNO cpp binding
KDE_FIND_PATH(cppumaker, CPPUMAKER, [$ac_ooo_sdk_bindir ${prefix}/bin ${exec_prefix}/bin /usr/bin /usr/local/bin /opt/local/bin], [
AC_MSG_ERROR([[cppumaker not found, try '--with-ooo-sdk-dir=location_of_ODK']])
])
dnl Check for ODK includes
ac_cppflags_safe="$CPPFLAGS"
CPPFLAGS="-I$ac_ooo_sdk_includes"
KDE_CHECK_HEADERS([sal/config.h],
[OFFICE_SDK_includes="$CPPFLAGS"],
AC_MSG_ERROR([[OpenOffice.org SDK include files not found, try '--with-ooo-sdk-dir=location_of_ODK']]))
CPPFLAGS="$ac_cppflags_safe"
dnl OpenOffice.org libraries
if test -n "$ac_ooo_libdir" ; then
OFFICE_libadd="-L$ac_ooo_libdir"
OFFICE_libdir="$ac_ooo_libdir"
fi
dnl OpenOffice.org types.rdb
AC_CHECK_FILE([$ac_ooo_datadir/types.rdb],
[OFFICE_registry="$ac_ooo_datadir"/types.rdb],
AC_MSG_ERROR([[types.rdb not found, try '--with-ooo-dir=OpenOffice.org_installation_path']]))
dnl Substitute the values
AC_SUBST(OFFICE_SDK_includes)
AC_SUBST(OFFICE_libadd)
AC_SUBST(OFFICE_libdir)
AC_SUBST(OFFICE_registry)
AC_SUBST(CPPUMAKER)
fi
CFLAGS="$CFLAGS -I\$(top_srcdir)/src/core"
CXXFLAGS="$CXXFLAGS -I\$(top_srcdir)/src/core"
dnl ---------- EXEMPI CHECK ----------
AC_ARG_ENABLE(exempi,
AC_HELP_STRING([--disable-exempi], [disable exempi, default=enable if found]),
[enable_libexempi=$enableval],
[enable_libexempi=yes]
)
if test x$enable_libexempi = xyes; then
KDE_PKG_CHECK_MODULES(EXEMPI,
[exempi-2.0 >= 1.99.0],
[have_exempi=yes],
[have_exempi=no])
AC_SUBST(EXEMPI_LIBS)
AC_SUBST(EXEMPI_CFLAGS)
else
have_exempi="no (disabled)"
fi
test "$have_exempi" = "yes" && AC_DEFINE(HAVE_EXEMPI, 1, [Define to 1 if exempi is available])
dnl ---------- END EXEMPI CHECK ----------
dnl ---------- POPPLER CHECK ----------
AC_ARG_ENABLE(poppler,
AC_HELP_STRING([--disable-poppler], [disable poppler, default=enable if found]),
[enable_libpoppler=$enableval],
[enable_libpoppler=yes]
)
if test x$enable_libpoppler = xyes; then
KDE_PKG_CHECK_MODULES(POPPLER,
[poppler-qt >= 0.5],
[have_poppler=yes],
[have_poppler=no])
AC_SUBST(POPPLER_LIBS)
AC_SUBST(POPPLER_CFLAGS)
else
have_poppler="no (disabled)"
fi
test "$have_poppler" = "yes" && AC_DEFINE(HAVE_POPPLER, 1, [Define to 1 if poppler is available])
dnl ---------- END POPPLER CHECK ----------
dnl ---------- WEBCAM CHECK ----------
AC_ARG_ENABLE(webcam,
AC_HELP_STRING([--enable-webcam], [enable support for webcams (experimental), default=disable]),
[enable_webcam=$enableval],
[enable_webcam=no]
)
AM_CONDITIONAL(ENABLE_WEBCAM, test $enable_webcam = yes)
if test x$enable_webcam = xyes; then
AC_DEFINE(ENABLE_WEBCAM, 1, [Define to 1 if webcam support is enabled])
fi
dnl ---------- END WEBCAM CHECK ----------
KDE_CREATE_SUBDIRSLIST
AC_CONFIG_FILES([ Makefile ])
AC_CONFIG_FILES([ doc/Makefile ])
AC_CONFIG_FILES([ doc/en/Makefile ])
AC_CONFIG_FILES([ doc/fr/Makefile ])
AC_CONFIG_FILES([ icons/Makefile ])
AC_CONFIG_FILES([ po/Makefile ])
AC_CONFIG_FILES([ src/Makefile ])
AC_CONFIG_FILES([ src/barcode/Makefile ])
AC_CONFIG_FILES([ src/cite/Makefile ])
AC_CONFIG_FILES([ src/cite/ooo/Makefile ])
AC_CONFIG_FILES([ src/collections/Makefile ])
AC_CONFIG_FILES([ src/commands/Makefile ])
AC_CONFIG_FILES([ src/core/Makefile ])
AC_CONFIG_FILES([ src/fetch/Makefile ])
AC_CONFIG_FILES([ src/fetch/scripts/Makefile ])
AC_CONFIG_FILES([ src/gui/Makefile ])
AC_CONFIG_FILES([ src/newstuff/Makefile ])
AC_CONFIG_FILES([ src/rtf2html/Makefile ])
AC_CONFIG_FILES([ src/tests/Makefile ])
AC_CONFIG_FILES([ src/translators/Makefile ])
AC_CONFIG_FILES([ src/translators/btparse/Makefile ])
AC_CONFIG_FILES([ src/translators/pilotdb/Makefile ])
AC_CONFIG_FILES([ src/translators/pilotdb/libflatfile/Makefile ])
AC_CONFIG_FILES([ src/translators/pilotdb/libpalm/Makefile ])
AC_CONFIG_FILES([ xslt/Makefile ])
AC_CONFIG_FILES([ xslt/entry-templates/Makefile ])
AC_CONFIG_FILES([ xslt/report-templates/Makefile ])
AC_OUTPUT
echo ""
if test -z "$TAGLIB_CONFIG"; then
echo " *******************************************************"
echo " *** You don't have the TagLib headers on your system"
echo " *** Support for reading audio files is disabled"
echo " *******************************************************"
echo ""
fi
if test -z "$YAZ_CONFIG"; then
echo " *******************************************************"
echo " *** You don't have the yaz headers on your system"
echo " *** Support for z39.50 searches is disabled"
echo " *******************************************************"
echo ""
fi
if test x$kcddb != xyes; then
echo " *******************************************************"
echo " *** You don't have the kcddb headers on your system"
echo " *** Support for fetching CDDB info is disabled"
echo " *******************************************************"
echo ""
fi
if test x$kcal != xyes; then
echo " *******************************************************"
echo " *** You don't have the kcal headers on your system"
echo " *** Support for interacting with KOrganizer is disabled"
echo " *******************************************************"
echo ""
fi
if test x$have_exempi != xyes; then
echo " *******************************************************"
echo " *** You don't have the exempi headers on your system"
echo " *** Support for importing some PDF metadata is disabled"
echo " *******************************************************"
echo ""
fi
if test x$have_poppler != xyes; then
echo " *******************************************************"
echo " *** You don't have the poppler headers on your system"
echo " *** Support for searching inside PDF files is disabled"
echo " *******************************************************"
echo ""
fi
# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
# And if so, warn when they don't match
if test "$kde_libs_prefix" != "$given_prefix"; then
echo ""
echo "Warning: you chose to install this package in $given_prefix,"
echo "but KDE was found in $kde_libs_prefix."
echo "For this to work, you will need to tell KDE about the new prefix,"
echo "by ensuring that TDEDIRS contains it, e.g."
echo " export TDEDIRS=$given_prefix:$kde_libs_prefix"
echo "Then restart KDE."
echo ""
fi
fi
if test "$all_tests" = "bad"; then
if test ! "$cache_file" = "/dev/null"; then
echo ""
echo "Please remove the file $cache_file after changing your setup"
echo "so that configure will find the changes next time."
echo ""
fi
else
echo ""
echo "Good - your configure finished. Start make now"
echo ""
fi