You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tqt3/doc/tqcache.doc

470 lines
14 KiB

/****************************************************************************
**
** TQCache and TQCacheIterator class documentation
**
** Copyright (C) 1992-2008 Trolltech ASA. All rights reserved.
**
** This file is part of the TQt GUI Toolkit.
**
** This file may be used under the terms of the GNU General
** Public License versions 2.0 or 3.0 as published by the Free
** Software Foundation and appearing in the files LICENSE.GPL2
** and LICENSE.GPL3 included in the packaging of this file.
** Alternatively you may (at your option) use any later version
** of the GNU General Public License if such license has been
** publicly approved by Trolltech ASA (or its successors, if any)
** and the KDE Free TQt Foundation.
**
** Please review the following information to ensure GNU General
** Public Licensing requirements will be met:
** http://trolltech.com/products/qt/licenses/licensing/opensource/.
** If you are unsure which license is appropriate for your use, please
** review the following information:
** http://trolltech.com/products/qt/licenses/licensing/licensingoverview
** or contact the sales department at sales@trolltech.com.
**
** This file may be used under the terms of the Q Public License as
** defined by Trolltech ASA and appearing in the file LICENSE.QPL
** included in the packaging of this file. Licensees holding valid Qt
** Commercial licenses may use this file in accordance with the Qt
** Commercial License Agreement provided with the Software.
**
** This file is provided "AS IS" with NO WARRANTY OF ANY KIND,
** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted
** herein.
**
**********************************************************************/
/*****************************************************************************
TQCache documentation
*****************************************************************************/
/*!
\class TQCache
\brief The TQCache class is a template class that provides a cache based on TQString keys.
\ingroup collection
\ingroup tools
\important autoDelete setAutoDelete
A cache is a least recently used (LRU) list of cache items. Each
cache item has a key and a certain cost. The sum of item costs,
totalCost(), never exceeds the maximum cache cost, maxCost(). If
inserting a new item would cause the total cost to exceed the
maximum cost, the least recently used items in the cache are
removed.
TQCache is a template class. TQCache\<X\> defines a cache that
operates on pointers to X, or X*.
Apart from insert(), by far the most important function is find()
(which also exists as operator[]()). This function looks up an
item, returns it, and by default marks it as being the most
recently used item.
There are also methods to remove() or take() an object from the
cache. Calling setAutoDelete(TRUE) for a cache tells it to delete
items that are removed. The default is to not delete items when
they are removed (i.e., remove() and take() are equivalent).
When inserting an item into the cache, only the pointer is copied,
not the item itself. This is called a shallow copy. It is possible
to make the cache copy all of the item's data (known as a deep
copy) when an item is inserted. insert() calls the virtual
function TQPtrCollection::newItem() for the item to be inserted.
Inherit a cache and reimplement newItem() if you want deep copies.
When removing a cache item, the virtual function
TQPtrCollection::deleteItem() is called. The default
implementation deletes the item if auto-deletion is enabled, and
does nothing otherwise.
There is a TQCacheIterator that can be used to traverse the items
in the cache in arbitrary order.
In TQCache, the cache items are accessed via \l TQString keys, which
are Unicode strings. If you want to use non-Unicode, plain 8-bit
\c char* keys, use the TQAsciiCache template. A TQCache has the
same performance as a TQAsciiCache.
\sa TQCacheIterator, TQAsciiCache, TQIntCache
*/
/*!
\fn TQCache::TQCache( const TQCache<type> &c )
\internal
Do not use. A TQCache cannot be copied. Calls tqFatal() in debug version.
*/
/*!
\fn TQCache::TQCache( int maxCost, int size, bool caseSensitive )
Constructs a cache whose contents will never have a total cost
greater than \a maxCost and which is expected to contain less than
\a size items.
\a size is actually the size of an internal hash array; it's
usually best to make it a prime number and at least 50% bigger
than the largest expected number of items in the cache.
Each inserted item has an associated cost. When inserting a new
item, if the total cost of all items in the cache will exceed \a
maxCost, the cache will start throwing out the older (least
recently used) items until there is enough room for the new item
to be inserted.
If \a caseSensitive is TRUE (the default), the cache keys are case
sensitive; if it is FALSE, they are case-insensitive.
Case-insensitive comparison considers all Unicode letters.
*/
/*!
\fn TQCache::~TQCache()
Removes all items from the cache and destroys it. All iterators
that access this cache will be reset.
*/
/*!
\fn TQCache<type>& TQCache::operator=( const TQCache<type> &c )
\internal
Do not use. A TQCache cannot be copied. Calls tqFatal() in debug version.
*/
/*!
\fn int TQCache::maxCost() const
Returns the maximum allowed total cost of the cache.
\sa setMaxCost() totalCost()
*/
/*!
\fn int TQCache::totalCost() const
Returns the total cost of the items in the cache. This is an
integer in the range 0 to maxCost().
\sa setMaxCost()
*/
/*!
\fn void TQCache::setMaxCost( int m )
Sets the maximum allowed total cost of the cache to \a m. If the
current total cost is greater than \a m, some items are deleted
immediately.
\sa maxCost() totalCost()
*/
/*!
\fn uint TQCache::count() const
Returns the number of items in the cache.
\sa totalCost()
*/
/*!
\fn uint TQCache::size() const
Returns the size of the hash array used to implement the cache.
This should be a bit bigger than count() is likely to be.
*/
/*!
\fn bool TQCache::isEmpty() const
Returns TRUE if the cache is empty; otherwise returns FALSE.
*/
/*!
\fn bool TQCache::insert( const TQString &k, const type *d, int c, int p )
Inserts the item \a d into the cache with key \a k and associated
cost, \a c. Returns TRUE if it is successfully inserted; otherwise
returns FALSE.
The cache's size is limited, and if the total cost is too high,
TQCache will remove old, least recently used items until there is
room for this new item.
The parameter \a p is internal and should be left at the default
value (0).
\warning If this function returns FALSE (which could happen, e.g.
if the cost of this item alone exceeds maxCost()) you must delete
\a d yourself. Additionally, be very careful about using \a d
after calling this function because any other insertions into the
cache, from anywhere in the application or within TQt itself, could
cause the object to be discarded from the cache and the pointer to
become invalid.
*/
/*!
\fn bool TQCache::remove( const TQString &k )
Removes the item associated with \a k, and returns TRUE if the
item was present in the cache; otherwise returns FALSE.
The item is deleted if auto-deletion has been enabled, i.e., if
you have called setAutoDelete(TRUE).
If there are two or more items with equal keys, the one that was
inserted last is removed.
All iterators that refer to the removed item are set to point to
the next item in the cache's traversal order.
\sa take(), clear()
*/
/*!
\fn type *TQCache::take( const TQString &k )
Takes the item associated with \a k out of the cache without
deleting it, and returns a pointer to the item taken out, or 0
if the key does not exist in the cache.
If there are two or more items with equal keys, the one that was
inserted last is taken.
All iterators that refer to the taken item are set to point to the
next item in the cache's traversal order.
\sa remove(), clear()
*/
/*!
\fn void TQCache::clear()
Removes all items from the cache and deletes them if auto-deletion
has been enabled.
All cache iterators that operate this on cache are reset.
\sa remove() take()
*/
/*!
\fn type *TQCache::find( const TQString &k, bool ref ) const
Returns the item associated with key \a k, or 0 if the key does
not exist in the cache. If \a ref is TRUE (the default), the item
is moved to the front of the least recently used list.
If there are two or more items with equal keys, the one that was
inserted last is returned.
*/
/*!
\fn type *TQCache::operator[]( const TQString &k ) const
Returns the item associated with key \a k, or 0 if \a k does not
exist in the cache, and moves the item to the front of the least
recently used list.
If there are two or more items with equal keys, the one that was
inserted last is returned.
This is the same as find( k, TRUE ).
\sa find()
*/
/*!
\fn void TQCache::statistics() const
A debug-only utility function. Prints out cache usage, hit/miss,
and distribution information using tqDebug(). This function does
nothing in the release library.
*/
/*****************************************************************************
TQCacheIterator documentation
*****************************************************************************/
/*!
\class TQCacheIterator tqcache.h
\brief The TQCacheIterator class provides an iterator for TQCache collections.
\ingroup collection
\ingroup tools
Note that the traversal order is arbitrary; you are not guaranteed
any particular order. If new objects are inserted into the cache
while the iterator is active, the iterator may or may not see
them.
Multiple iterators are completely independent, even when they
operate on the same TQCache. TQCache updates all iterators that
refer an item when that item is removed.
TQCacheIterator provides an operator++(), and an operator+=() to
traverse the cache. The current() and currentKey() functions are
used to access the current cache item and its key. The atFirst()
and atLast() return TRUE if the iterator points to the first or
last item in the cache respectively. The isEmpty() function
returns TRUE if the cache is empty, and count() returns the number
of items in the cache.
Note that atFirst() and atLast() refer to the iterator's arbitrary
ordering, not to the cache's internal least recently used list.
\sa TQCache
*/
/*!
\fn TQCacheIterator::TQCacheIterator( const TQCache<type> &cache )
Constructs an iterator for \a cache. The current iterator item is
set to point to the first item in the \a cache.
*/
/*!
\fn TQCacheIterator::TQCacheIterator (const TQCacheIterator<type> & ci)
Constructs an iterator for the same cache as \a ci. The new
iterator starts at the same item as ci.current(), but moves
independently from there on.
*/
/*!
\fn TQCacheIterator<type>& TQCacheIterator::operator=( const TQCacheIterator<type> &ci )
Makes this an iterator for the same cache as \a ci. The new
iterator starts at the same item as ci.current(), but moves
independently thereafter.
*/
/*!
\fn uint TQCacheIterator::count() const
Returns the number of items in the cache on which this iterator
operates.
\sa isEmpty()
*/
/*!
\fn bool TQCacheIterator::isEmpty() const
Returns TRUE if the cache is empty, i.e. count() == 0; otherwise
it returns FALSE.
\sa count()
*/
/*!
\fn bool TQCacheIterator::atFirst() const
Returns TRUE if the iterator points to the first item in the
cache; otherwise returns FALSE. Note that this refers to the
iterator's arbitrary ordering, not to the cache's internal least
recently used list.
\sa toFirst(), atLast()
*/
/*!
\fn bool TQCacheIterator::atLast() const
Returns TRUE if the iterator points to the last item in the cache;
otherwise returns FALSE. Note that this refers to the iterator's
arbitrary ordering, not to the cache's internal least recently
used list.
\sa toLast(), atFirst()
*/
/*!
\fn type *TQCacheIterator::toFirst()
Sets the iterator to point to the first item in the cache and
returns a pointer to the item.
Sets the iterator to 0 and returns 0 if the cache is empty.
\sa toLast() isEmpty()
*/
/*!
\fn type *TQCacheIterator::toLast()
Sets the iterator to point to the last item in the cache and
returns a pointer to the item.
Sets the iterator to 0 and returns 0 if the cache is empty.
\sa toFirst() isEmpty()
*/
/*!
\fn TQCacheIterator::operator type *() const
Cast operator. Returns a pointer to the current iterator item.
Same as current().
*/
/*!
\fn type *TQCacheIterator::current() const
Returns a pointer to the current iterator item.
*/
/*!
\fn TQString TQCacheIterator::currentKey() const
Returns the key for the current iterator item.
*/
/*!
\fn type *TQCacheIterator::operator()()
Makes the succeeding item current and returns the original current
item.
If the current iterator item was the last item in the cache or if
it was 0, 0 is returned.
*/
/*!
\fn type *TQCacheIterator::operator+=( uint jump )
Returns the item \a jump positions after the current item, or 0 if
it is beyond the last item. Makes this the current item.
*/
/*!
\fn type *TQCacheIterator::operator-=( uint jump )
Returns the item \a jump positions before the current item, or 0
if it is before the first item. Makes this the current item.
*/
/*!
\fn type *TQCacheIterator::operator++()
Prefix++ makes the iterator point to the item just after current()
and makes that the new current item for the iterator. If current()
was the last item, operator++() returns 0.
*/
/*!
\fn type *TQCacheIterator::operator--()
Prefix-- makes the iterator point to the item just before
current() and makes that the new current item for the iterator. If
current() was the first item, operator--() returns 0.
*/