Home | All Classes | Main Classes | Annotated | Grouped Classes | Functions

TQPainter Class Reference

The TQPainter class does low-level painting e.g. on widgets. More...

#include <ntqpainter.h>

Inherits TQt.

List of all member functions.

Public Members

Static Public Members

Related Functions


Detailed Description

The TQPainter class does low-level painting e.g. on widgets.

The painter provides highly optimized functions to do most of the drawing GUI programs require. TQPainter can draw everything from simple lines to complex shapes like pies and chords. It can also draw aligned text and pixmaps. Normally, it draws in a "natural" coordinate system, but it can also do view and world transformation.

The typical use of a painter is:

Mostly, all this is done inside a paint event. (In fact, 99% of all TQPainter use is in a reimplementation of TQWidget::paintEvent(), and the painter is heavily optimized for such use.) Here's one very simple example:

    void SimpleExampleWidget::paintEvent()
    {
        TQPainter paint( this );
        paint.setPen( TQt::blue );
        paint.drawText( rect(), AlignCenter, "The Text" );
    }
    

Usage is simple, and there are many settings you can use:

Note that some of these settings mirror settings in some paint devices, e.g. TQWidget::font(). TQPainter::begin() (or the TQPainter constructor) copies these attributes from the paint device. Calling, for example, TQWidget::setFont() doesn't take effect until the next time a painter begins painting on it.

save() saves all of these settings on an internal stack, restore() pops them back.

The core functionality of TQPainter is drawing, and there are functions to draw most primitives: drawPoint(), drawPoints(), drawLine(), drawRect(), drawWinFocusRect(), drawRoundRect(), drawEllipse(), drawArc(), drawPie(), drawChord(), drawLineSegments(), drawPolyline(), drawPolygon(), drawConvexPolygon() and drawCubicBezier(). All of these functions take integer coordinates; there are no floating-point versions since we want drawing to be as fast as possible.

There are functions to draw pixmaps/images, namely drawPixmap(), drawImage() and drawTiledPixmap(). drawPixmap() and drawImage() produce the same result, except that drawPixmap() is faster on-screen and drawImage() faster and sometimes better on TQPrinter and TQPicture.

Text drawing is done using drawText(), and when you need fine-grained positioning, boundingRect() tells you where a given drawText() command would draw.

There is a drawPicture() function that draws the contents of an entire TQPicture using this painter. drawPicture() is the only function that disregards all the painter's settings: the TQPicture has its own settings.

Normally, the TQPainter operates on the device's own coordinate system (usually pixels), but TQPainter has good support for coordinate transformation. See The Coordinate System for a more general overview and a simple example.

The most common functions used are scale(), rotate(), translate() and shear(), all of which operate on the worldMatrix(). setWorldMatrix() can replace or add to the currently set worldMatrix().

setViewport() sets the rectangle on which TQPainter operates. The default is the entire device, which is usually fine, except on printers. setWindow() sets the coordinate system, that is, the rectangle that maps to viewport(). What's drawn inside the window() ends up being inside the viewport(). The window's default is the same as the viewport, and if you don't use the transformations, they are optimized away, gaining another little bit of speed.

After all the coordinate transformation is done, TQPainter can clip the drawing to an arbitrary rectangle or region. hasClipping() is TRUE if TQPainter clips, and clipRegion() returns the clip region. You can set it using either setClipRegion() or setClipRect(). Note that the clipping can be slow. It's all system-dependent, but as a rule of thumb, you can assume that drawing speed is inversely proportional to the number of rectangles in the clip region.

After TQPainter's clipping, the paint device may also clip. For example, most widgets clip away the pixels used by child widgets, and most printers clip away an area near the edges of the paper. This additional clipping is not reflected by the return value of clipRegion() or hasClipping().

TQPainter also includes some less-used functions that are very useful on those occasions when they're needed.

isActive() indicates whether the painter is active. begin() (and the most usual constructor) makes it active. end() (and the destructor) deactivates it. If the painter is active, device() returns the paint device on which the painter paints.

Sometimes it is desirable to make someone else paint on an unusual TQPaintDevice. TQPainter supports a static function to do this, redirect(). We recommend not using it, but for some hacks it's perfect.

setTabStops() and setTabArray() can change where the tab stops are, but these are very seldomly used.

Warning: Note that TQPainter does not attempt to work around coordinate limitations in the underlying window system. Some platforms may behave incorrectly with coordinates as small as +/-4000.

See also TQPaintDevice, TQWidget, TQPixmap, TQPrinter, TQPicture, Application Walkthrough, Coordinate System Overview, Graphics Classes, and Image Processing Classes.


Member Type Documentation

TQPainter::CoordinateMode

See also clipRegion().

TQPainter::TextDirection

See also drawText().


Member Function Documentation

TQPainter::TQPainter ()

Constructs a painter.

Notice that all painter settings (setPen, setBrush etc.) are reset to default values when begin() is called.

See also begin() and end().

TQPainter::TQPainter ( const TQPaintDevice * pd, bool unclipped = FALSE )

Constructs a painter that begins painting the paint device pd immediately. Depending on the underlying graphic system the painter will paint over children of the paintdevice if unclipped is TRUE.

This constructor is convenient for short-lived painters, e.g. in a paint event and should be used only once. The constructor calls begin() for you and the TQPainter destructor automatically calls end().

Here's an example using begin() and end():

        void MyWidget::paintEvent( TQPaintEvent * )
        {
            TQPainter p;
            p.begin( this );
            p.drawLine( ... );  // drawing code
            p.end();
        }
    

The same example using this constructor:

        void MyWidget::paintEvent( TQPaintEvent * )
        {
            TQPainter p( this );
            p.drawLine( ... );  // drawing code
        }
    

Since the constructor cannot provide feedback when the initialization of the painter failed you should rather use begin() and end() to paint on external devices, e.g. printers.

See also begin() and end().

TQPainter::TQPainter ( const TQPaintDevice * pd, const TQWidget * copyAttributes, bool unclipped = FALSE )

Constructs a painter that begins painting the paint device pd immediately, with the default arguments taken from copyAttributes. The painter will paint over children of the paint device if unclipped is TRUE (although this is not supported on all platforms).

See also begin().

TQPainter::~TQPainter ()

Destroys the painter.

const TQColor & TQPainter::backgroundColor () const

Returns the current background color.

See also setBackgroundColor() and TQColor.

BGMode TQPainter::backgroundMode () const

Returns the current background mode.

See also setBackgroundMode() and BGMode.

bool TQPainter::begin ( const TQPaintDevice * pd, bool unclipped = FALSE )

Begins painting the paint device pd and returns TRUE if successful; otherwise returns FALSE. If unclipped is TRUE, the painting will not be clipped at the paint device's boundaries, (although this is not supported by all platforms).

The errors that can occur are serious problems, such as these:

        p->begin( 0 ); // impossible - paint device cannot be 0

        TQPixmap pm( 0, 0 );
        p->begin( pm ); // impossible - pm.isNull();

        p->begin( myWidget );
        p2->begin( myWidget ); // impossible - only one painter at a time
    

Note that most of the time, you can use one of the constructors instead of begin(), and that end() is automatically done at destruction.

Warning: A paint device can only be painted by one painter at a time.

See also end() and flush().

Examples: aclock/aclock.cpp, desktop/desktop.cpp, drawdemo/drawdemo.cpp, hello/hello.cpp, picture/picture.cpp, t10/cannon.cpp, and xform/xform.cpp.

bool TQPainter::begin ( const TQPaintDevice * pd, const TQWidget * copyAttributes, bool unclipped = FALSE )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

This version opens the painter on a paint device pd and sets the initial pen, background color and font from copyAttributes, painting over the paint device's children when unclipped is TRUE. This is equivalent to:

        TQPainter p;
        p.begin( pd );
        p.setPen( copyAttributes->foregroundColor() );
        p.setBackgroundColor( copyAttributes->backgroundColor() );
        p.setFont( copyAttributes->font() );
    

This begin function is convenient for double buffering. When you draw in a pixmap instead of directly in a widget (to later bitBlt the pixmap into the widget) you will need to set the widget's font etc. This function does exactly that.

Example:

        void MyWidget::paintEvent( TQPaintEvent * )
        {
            TQPixmap pm(size());
            TQPainter p;
            p.begin(&pm, this);
            // ... potentially flickering paint operation ...
            p.end();
            bitBlt(this, 0, 0, &pm);
        }
    

See also end().

TQRect TQPainter::boundingRect ( int x, int y, int w, int h, int flags, const TQString &, int len = -1, TQTextParag ** intern = 0 )

Returns the bounding rectangle of the aligned text that would be printed with the corresponding drawText() function using the first len characters of the string if len is > -1, or the whole of the string if len is -1. The drawing, and hence the bounding rectangle, is constrained to the rectangle that begins at point (x, y) with width w and hight h, or to the rectangle required to draw the text, whichever is the larger.

The flags argument is the bitwise OR of the following flags:

Flag Meaning
AlignAuto aligns according to the language, usually left.
AlignLeft aligns to the left border.
AlignRight aligns to the right border.
AlignHCenter aligns horizontally centered.
AlignTop aligns to the top border.
AlignBottom aligns to the bottom border.
AlignVCenter aligns vertically centered.
AlignCenter (== AlignHCenter | AlignVCenter).
SingleLine ignores newline characters in the text.
ExpandTabs expands tabs.
ShowPrefix interprets "&x" as "x".
WordBreak breaks the text to fit the rectangle.

Horizontal alignment defaults to AlignLeft and vertical alignment defaults to AlignTop.

If several of the horizontal or several of the vertical alignment flags are set, the resulting alignment is undefined.

The intern parameter should not be used.

See also TQt::TextFlags.

TQRect TQPainter::boundingRect ( const TQRect & r, int flags, const TQString & str, int len = -1, TQTextParag ** internal = 0 )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Returns the bounding rectangle of the aligned text that would be printed with the corresponding drawText() function using the first len characters from str if len is > -1, or the whole of str if len is -1. The drawing, and hence the bounding rectangle, is constrained to the rectangle r, or to the rectangle required to draw the text, whichever is the larger.

The internal parameter should not be used.

See also drawText(), fontMetrics(), TQFontMetrics::boundingRect(), and TQt::TextFlags.

const TQBrush & TQPainter::brush () const

Returns the painter's current brush.

See also TQPainter::setBrush().

Examples: themes/metal.cpp and themes/wood.cpp.

const TQPoint & TQPainter::brushOrigin () const

Returns the brush origin currently set.

See also setBrushOrigin().

TQRegion TQPainter::clipRegion ( CoordinateMode m = CoordDevice ) const

Returns the currently set clip region. Note that the clip region is given in physical device coordinates and not subject to any coordinate transformation if m is equal to CoordDevice (the default). If m equals CoordPainter the returned region is in model coordinates.

See also setClipRegion(), setClipRect(), setClipping(), and TQPainter::CoordinateMode.

Example: themes/wood.cpp.

TQPaintDevice * TQPainter::device () const

Returns the paint device on which this painter is currently painting, or 0 if the painter is not active.

See also TQPaintDevice::paintingActive().

Examples: action/application.cpp, application/application.cpp, helpviewer/helpwindow.cpp, listboxcombo/listboxcombo.cpp, and mdi/application.cpp.

void TQPainter::drawArc ( int x, int y, int w, int h, int a, int alen )

Draws an arc defined by the rectangle (x, y, w, h), the start angle a and the arc length alen.

The angles a and alen are 1/16th of a degree, i.e. a full circle equals 5760 (16*360). Positive values of a and alen mean counter-clockwise while negative values mean the clockwise direction. Zero degrees is at the 3 o'clock position.

Example:

        TQPainter p( myWidget );
        p.drawArc( 10,10, 70,100, 100*16, 160*16 ); // draws a "(" arc
    

See also drawPie() and drawChord().

void TQPainter::drawArc ( const TQRect & r, int a, int alen )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the arc that fits inside the rectangle r with start angle a and arc length alen.

void TQPainter::drawChord ( int x, int y, int w, int h, int a, int alen )

Draws a chord defined by the rectangle (x, y, w, h), the start angle a and the arc length alen.

The chord is filled with the current brush().

The angles a and alen are 1/16th of a degree, i.e. a full circle equals 5760 (16*360). Positive values of a and alen mean counter-clockwise while negative values mean the clockwise direction. Zero degrees is at the 3 o'clock position.

See also drawArc() and drawPie().

void TQPainter::drawChord ( const TQRect & r, int a, int alen )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws a chord that fits inside the rectangle r with start angle a and arc length alen.

void TQPainter::drawConvexPolygon ( const TQPointArray & pa, int index = 0, int npoints = -1 )

Draws the convex polygon defined by the npoints points in pa starting at pa[index] (index defaults to 0).

If the supplied polygon is not convex, the results are undefined.

On some platforms (e.g. X Window), this is faster than drawPolygon().

Warning: On X11, coordinates that do not fit into 16-bit signed values are truncated. This limitation is expected to go away in TQt 4.

Example: aclock/aclock.cpp.

void TQPainter::drawCubicBezier ( const TQPointArray & a, int index = 0 )

Draws a cubic Bezier curve defined by the control points in a, starting at a[index] (index defaults to 0).

Control points after a[index + 3] are ignored. Nothing happens if there aren't enough control points.

Warning: On X11, coordinates that do not fit into 16-bit signed values are truncated. This limitation is expected to go away in TQt 4.

void TQPainter::drawEllipse ( int x, int y, int w, int h )

Draws an ellipse with center at (x + w/2, y + h/2) and size (w, h).

Examples: drawdemo/drawdemo.cpp, picture/picture.cpp, and tictac/tictac.cpp.

void TQPainter::drawEllipse ( const TQRect & r )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the ellipse that fits inside rectangle r.

void TQPainter::drawImage ( int x, int y, const TQImage & image, int sx = 0, int sy = 0, int sw = -1, int sh = -1, int conversionFlags = 0 )

Draws at (x, y) the sw by sh area of pixels from (sx, sy) in image, using conversionFlags if the image needs to be converted to a pixmap. The default value for conversionFlags is 0; see convertFromImage() for information about what other values do.

This function may convert image to a pixmap and then draw it, if device() is a TQPixmap or a TQWidget, or else draw it directly, if device() is a TQPrinter or TQPicture.

Currently alpha masks of the image are ignored when painting on a TQPrinter.

See also drawPixmap() and TQPixmap::convertFromImage().

Example: canvas/canvas.cpp.

void TQPainter::drawImage ( const TQPoint &, const TQImage &, const TQRect & sr, int conversionFlags = 0 )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the rectangle sr from the image at the given point.

void TQPainter::drawImage ( const TQPoint & p, const TQImage & i, int conversion_flags = 0 )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the image i at point p.

If the image needs to be modified to fit in a lower-resolution result (e.g. converting from 32-bit to 8-bit), use the conversion_flags to specify how you'd prefer this to happen.

See also TQt::ImageConversionFlags.

void TQPainter::drawImage ( const TQRect & r, const TQImage & i )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the image i into the rectangle r. The image will be scaled to fit the rectangle if image and rectangle dimensions differ.

void TQPainter::drawLine ( int x1, int y1, int x2, int y2 )

Draws a line from (x1, y1) to (x2, y2) and sets the current pen position to (x2, y2).

See also pen().

Examples: aclock/aclock.cpp, drawlines/connect.cpp, progress/progress.cpp, splitter/splitter.cpp, themes/metal.cpp, and themes/wood.cpp.

void TQPainter::drawLine ( const TQPoint & p1, const TQPoint & p2 )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws a line from point p1 to point p2.

void TQPainter::drawLineSegments ( const TQPointArray & a, int index = 0, int nlines = -1 )

Draws nlines separate lines from points defined in a, starting at a[index] (index defaults to 0). If nlines is -1 (the default) all points until the end of the array are used (i.e. (a.size()-index)/2 lines are drawn).

Draws the 1st line from a[index] to a[index+1]. Draws the 2nd line from a[index+2] to a[index+3] etc.

Warning: On X11, coordinates that do not fit into 16-bit signed values are truncated. This limitation is expected to go away in TQt 4.

See also drawPolyline(), drawPolygon(), and TQPen.

void TQPainter::drawPicture ( int x, int y, const TQPicture & pic )

Replays the picture pic translated by (x, y).

This function does exactly the same as TQPicture::play() when called with (x, y) = (0, 0).

Examples: picture/picture.cpp and xform/xform.cpp.

void TQPainter::drawPicture ( const TQPicture & pic )

This function is obsolete. It is provided to keep old source working. We strongly advise against using it in new code.

Use one of the other TQPainter::drawPicture() functions with a (0, 0) offset instead.

void TQPainter::drawPicture ( const TQPoint & p, const TQPicture & pic )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws picture pic at point p.

void TQPainter::drawPie ( int x, int y, int w, int h, int a, int alen )

Draws a pie defined by the rectangle (x, y, w, h), the start angle a and the arc length alen.

The pie is filled with the current brush().

The angles a and alen are 1/16th of a degree, i.e. a full circle equals 5760 (16*360). Positive values of a and alen mean counter-clockwise while negative values mean the clockwise direction. Zero degrees is at the 3 o'clock position.

See also drawArc() and drawChord().

Examples: drawdemo/drawdemo.cpp, grapher/grapher.cpp, t10/cannon.cpp, and t9/cannon.cpp.

void TQPainter::drawPie ( const TQRect & r, int a, int alen )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws a pie segment that fits inside the rectangle r with start angle a and arc length alen.

void TQPainter::drawPixmap ( int x, int y, const TQPixmap & pixmap, int sx = 0, int sy = 0, int sw = -1, int sh = -1 )

Draws a pixmap at (x, y) by copying a part of pixmap into the paint device.

(x, y) specifies the top-left point in the paint device that is to be drawn onto. (sx, sy) specifies the top-left point in pixmap that is to be drawn. The default is (0, 0).

(sw, sh) specifies the size of the pixmap that is to be drawn. The default, (-1, -1), means all the way to the bottom right of the pixmap.

Currently the mask of the pixmap or it's alpha channel are ignored when painting on a TQPrinter.

See also bitBlt() and TQPixmap::setMask().

Examples: grapher/grapher.cpp, picture/picture.cpp, tqdir/tqdir.cpp, qmag/qmag.cpp, showimg/showimg.cpp, t10/cannon.cpp, and xform/xform.cpp.

void TQPainter::drawPixmap ( const TQPoint & p, const TQPixmap & pm, const TQRect & sr )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the rectangle sr of pixmap pm with its origin at point p.

void TQPainter::drawPixmap ( const TQPoint & p, const TQPixmap & pm )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the pixmap pm with its origin at point p.

void TQPainter::drawPixmap ( const TQRect & r, const TQPixmap & pm )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the pixmap pm into the rectangle r. The pixmap is scaled to fit the rectangle, if image and rectangle size disagree.

void TQPainter::drawPoint ( int x, int y )

Draws/plots a single point at (x, y) using the current pen.

See also TQPen.

Examples: desktop/desktop.cpp and drawlines/connect.cpp.

void TQPainter::drawPoint ( const TQPoint & p )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the point p.

void TQPainter::drawPoints ( const TQPointArray & a, int index = 0, int npoints = -1 )

Draws/plots an array of points, a, using the current pen.

If index is non-zero (the default is zero) only points from index are drawn. If npoints is negative (the default) the rest of the points from index are drawn. If npoints is zero or greater, npoints points are drawn.

Warning: On X11, coordinates that do not fit into 16-bit signed values are truncated. This limitation is expected to go away in TQt 4.

void TQPainter::drawPolygon ( const TQPointArray & a, bool winding = FALSE, int index = 0, int npoints = -1 )

Draws the polygon defined by the npoints points in a starting at a[index]. (index defaults to 0.)

If npoints is -1 (the default) all points until the end of the array are used (i.e. a.size()-index line segments define the polygon).

The first point is always connected to the last point.

The polygon is filled with the current brush(). If winding is TRUE, the polygon is filled using the winding fill algorithm. If winding is FALSE, the polygon is filled using the even-odd (alternative) fill algorithm.

Warning: On X11, coordinates that do not fit into 16-bit signed values are truncated. This limitation is expected to go away in TQt 4.

See also drawLineSegments(), drawPolyline(), and TQPen.

Examples: desktop/desktop.cpp and picture/picture.cpp.

void TQPainter::drawPolyline ( const TQPointArray & a, int index = 0, int npoints = -1 )

Draws the polyline defined by the npoints points in a starting at a[index]. (index defaults to 0.)

If npoints is -1 (the default) all points until the end of the array are used (i.e. a.size()-index-1 line segments are drawn).

Warning: On X11, coordinates that do not fit into 16-bit signed values are truncated. This limitation is expected to go away in TQt 4.

See also drawLineSegments(), drawPolygon(), and TQPen.

Examples: scribble/scribble.cpp and themes/metal.cpp.

void TQPainter::drawRect ( int x, int y, int w, int h )

Draws a rectangle with upper left corner at (x, y) and with width w and height h.

See also TQPen and drawRoundRect().

Examples: drawdemo/drawdemo.cpp, picture/picture.cpp, t10/cannon.cpp, t11/cannon.cpp, t9/cannon.cpp, tooltip/tooltip.cpp, and trivial/trivial.cpp.

void TQPainter::drawRect ( const TQRect & r )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the rectangle r.

void TQPainter::drawRoundRect ( int x, int y, int w, int h, int xRnd = 25, int yRnd = 25 )

Draws a rectangle with rounded corners at (x, y), with width w and height h.

The xRnd and yRnd arguments specify how rounded the corners should be. 0 is angled corners, 99 is maximum roundedness.

The width and height include all of the drawn lines.

See also drawRect() and TQPen.

Examples: drawdemo/drawdemo.cpp and themes/wood.cpp.

void TQPainter::drawRoundRect ( const TQRect & r, int xRnd = 25, int yRnd = 25 )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws a rounded rectangle r, rounding to the x position xRnd and the y position yRnd on each corner.

void TQPainter::drawText ( const TQPoint & p, const TQString &, int pos, int len, TextDirection dir = Auto )

Draws the text from position pos, at point p. If len is -1 the entire string is drawn, otherwise just the first len characters. The text's direction is specified by dir.

Note that the meaning of y is not the same for the two drawText() varieties. For overloads that take a simple x, y pair (or a point), the y value is the text's baseline; for overloads that take a rectangle, rect.y() is the top of the rectangle and the text is aligned within that rectangle in accordance with the alignment flags.

See also TQPainter::TextDirection.

Examples: desktop/desktop.cpp, drawdemo/drawdemo.cpp, grapher/grapher.cpp, picture/picture.cpp, progress/progress.cpp, t8/cannon.cpp, and trivial/trivial.cpp.

void TQPainter::drawText ( int x, int y, const TQString &, int len = -1, TextDirection dir = Auto )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the given text at position x, y. If len is -1 (the default) all the text is drawn, otherwise the first len characters are drawn. The text's direction is given by dir.

See also TQPainter::TextDirection.

void TQPainter::drawText ( const TQPoint &, const TQString &, int len = -1, TextDirection dir = Auto )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the text at the given point.

See also TQPainter::TextDirection.

void TQPainter::drawText ( int x, int y, const TQString &, int pos, int len, TextDirection dir = Auto )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the text from position pos, at point (x, y). If len is -1 the entire string is drawn, otherwise just the first len characters. The text's direction is specified by dir.

void TQPainter::drawText ( int x, int y, int w, int h, int flags, const TQString &, int len = -1, TQRect * br = 0, TQTextParag ** internal = 0 )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws the given text within the rectangle starting at x, y, with width w and height h. If len is -1 (the default) all the text is drawn, otherwise the first len characters are drawn. The text's flags that are given in the flags parameter are TQt::AlignmentFlags and TQt::TextFlags OR'd together. br (if not null) is set to the actual bounding rectangle of the output. The internal parameter is for internal use only.

void TQPainter::drawText ( const TQRect & r, int tf, const TQString & str, int len = -1, TQRect * brect = 0, TQTextParag ** internal = 0 )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws at most len characters from str in the rectangle r.

This function draws formatted text. The tf text format is really of type TQt::AlignmentFlags and TQt::TextFlags OR'd together.

Horizontal alignment defaults to AlignAuto and vertical alignment defaults to AlignTop.

brect (if not null) is set to the actual bounding rectangle of the output. internal is, yes, internal.

See also boundingRect().

void TQPainter::drawTiledPixmap ( int x, int y, int w, int h, const TQPixmap & pixmap, int sx = 0, int sy = 0 )

Draws a tiled pixmap in the specified rectangle.

(x, y) specifies the top-left point in the paint device that is to be drawn onto; with the width and height given by w and h. (sx, sy) specifies the top-left point in pixmap that is to be drawn. The default is (0, 0).

Calling drawTiledPixmap() is similar to calling drawPixmap() several times to fill (tile) an area with a pixmap, but is potentially much more efficient depending on the underlying window system.

See also drawPixmap().

void TQPainter::drawTiledPixmap ( const TQRect & r, const TQPixmap & pm, const TQPoint & sp )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws a tiled pixmap, pm, inside rectangle r with its origin at point sp.

void TQPainter::drawTiledPixmap ( const TQRect & r, const TQPixmap & pm )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws a tiled pixmap, pm, inside rectangle r.

void TQPainter::drawWinFocusRect ( int x, int y, int w, int h, const TQColor & bgColor )

Draws a Windows focus rectangle with upper left corner at (x, y) and with width w and height h using a pen color that contrasts with bgColor.

This function draws a stippled rectangle (XOR is not used) that is used to indicate keyboard focus (when the TQApplication::style() is WindowStyle).

The pen color used to draw the rectangle is either white or black depending on the color of bgColor (see TQColor::gray()).

Warning: This function draws nothing if the coordinate system has been rotated or sheared.

See also drawRect() and TQApplication::style().

void TQPainter::drawWinFocusRect ( int x, int y, int w, int h )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws a Windows focus rectangle with upper left corner at (x, y) and with width w and height h.

This function draws a stippled XOR rectangle that is used to indicate keyboard focus (when TQApplication::style() is WindowStyle).

Warning: This function draws nothing if the coordinate system has been rotated or sheared.

See also drawRect() and TQApplication::style().

void TQPainter::drawWinFocusRect ( const TQRect & r )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws rectangle r as a window focus rectangle.

void TQPainter::drawWinFocusRect ( const TQRect & r, const TQColor & bgColor )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws rectangle r as a window focus rectangle using background color bgColor.

bool TQPainter::end ()

Ends painting. Any resources used while painting are released.

Note that while you mostly don't need to call end(), the destructor will do it, there is at least one common case when it is needed, namely double buffering.

        TQPainter p( myPixmap, this )
        // ...
        p.end(); // stops drawing on myPixmap
        p.begin( this );
        p.drawPixmap( 0, 0, myPixmap );
    

Since you can't draw a TQPixmap while it is being painted, it is necessary to close the active painter.

See also begin() and isActive().

Examples: aclock/aclock.cpp, desktop/desktop.cpp, hello/hello.cpp, picture/picture.cpp, scribble/scribble.cpp, t10/cannon.cpp, and xform/xform.cpp.

void TQPainter::eraseRect ( int x, int y, int w, int h )

Erases the area inside x, y, w, h. Equivalent to fillRect( x, y, w, h, backgroundColor() ).

Examples: listboxcombo/listboxcombo.cpp and showimg/showimg.cpp.

void TQPainter::eraseRect ( const TQRect & r )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Erases the area inside the rectangle r.

void TQPainter::fillRect ( int x, int y, int w, int h, const TQBrush & brush )

Fills the rectangle (x, y, w, h) with the brush.

You can specify a TQColor as brush, since there is a TQBrush constructor that takes a TQColor argument and creates a solid pattern brush.

See also drawRect().

Examples: listboxcombo/listboxcombo.cpp, progress/progress.cpp, tqdir/tqdir.cpp, qfd/fontdisplayer.cpp, themes/metal.cpp, and themes/wood.cpp.

void TQPainter::fillRect ( const TQRect & r, const TQBrush & brush )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Fills the rectangle r using brush brush.

void TQPainter::flush ( const TQRegion & region, CoordinateMode cm = CoordDevice )

Flushes any buffered drawing operations inside the region region using clipping mode cm.

The flush may update the whole device if the platform does not support flushing to a specified region.

See also CoordinateMode.

void TQPainter::flush ()

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Flushes any buffered drawing operations.

const TQFont & TQPainter::font () const

Returns the currently set painter font.

See also setFont() and TQFont.

Example: fileiconview/tqfileiconview.cpp.

TQFontInfo TQPainter::fontInfo () const

Returns the font info for the painter, if the painter is active. It is not possible to obtain font information for an inactive painter, so the return value is undefined if the painter is not active.

See also fontMetrics() and isActive().

TQFontMetrics TQPainter::fontMetrics () const

Returns the font metrics for the painter, if the painter is active. It is not possible to obtain metrics for an inactive painter, so the return value is undefined if the painter is not active.

See also fontInfo() and isActive().

Examples: action/application.cpp, application/application.cpp, desktop/desktop.cpp, drawdemo/drawdemo.cpp, helpviewer/helpwindow.cpp, mdi/application.cpp, and qwerty/qwerty.cpp.

HDC TQPainter::handle () const

Returns the platform-dependent handle used for drawing. Using this function is not portable.

bool TQPainter::hasClipping () const

Returns TRUE if clipping has been set; otherwise returns FALSE.

See also setClipping().

Example: themes/wood.cpp.

bool TQPainter::hasViewXForm () const

Returns TRUE if view transformation is enabled; otherwise returns FALSE.

See also setViewXForm() and xForm().

bool TQPainter::hasWorldXForm () const

Returns TRUE if world transformation is enabled; otherwise returns FALSE.

See also setWorldXForm().

bool TQPainter::isActive () const

Returns TRUE if the painter is active painting, i.e. begin() has been called and end() has not yet been called; otherwise returns FALSE.

See also TQPaintDevice::paintingActive().

Examples: desktop/desktop.cpp and helpviewer/helpwindow.cpp.

void TQPainter::lineTo ( int x, int y )

This function is obsolete. It is provided to keep old source working. We strongly advise against using it in new code.

Use drawLine() instead.

Draws a line from the current pen position to (x, y) and sets (x, y) to be the new current pen position.

See also TQPen, moveTo(), drawLine(), and pos().

void TQPainter::lineTo ( const TQPoint & p )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Draws a line to the point p.

void TQPainter::moveTo ( int x, int y )

This function is obsolete. It is provided to keep old source working. We strongly advise against using it in new code.

Sets the current pen position to (x, y)

See also lineTo() and pos().

void TQPainter::moveTo ( const TQPoint & p )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Moves to the point p.

const TQPen & TQPainter::pen () const

Returns the painter's current pen.

See also setPen().

Examples: progress/progress.cpp, and themes/wood.cpp.

TQPoint TQPainter::pos () const

This function is obsolete. It is provided to keep old source working. We strongly advise against using it in new code.

Returns the current position of the pen.

See also moveTo().

RasterOp TQPainter::rasterOp () const

Returns the current raster operation.

See also setRasterOp() and RasterOp.

void TQPainter::redirect ( TQPaintDevice * pdev, TQPaintDevice * replacement ) [static]

Redirects all paint commands for a paint device, pdev, to another paint device, replacement, unless replacement is 0. If replacement is 0, the redirection for pdev is removed.

In general, you'll probably find calling TQPixmap::grabWidget() or TQPixmap::grabWindow() is an easier solution.

void TQPainter::resetXForm ()

Resets any transformations that were made using translate(), scale(), shear(), rotate(), setWorldMatrix(), setViewport() and setWindow().

See also worldMatrix(), viewport(), and window().

void TQPainter::restore ()

Restores the current painter state (pops a saved state off the stack).

See also save().

Example: aclock/aclock.cpp.

void TQPainter::restoreWorldMatrix ()

This function is obsolete. It is provided to keep old source working. We strongly advise against using it in new code.

We recommend using restore() instead.

void TQPainter::rotate ( double a )

Rotates the coordinate system a degrees counterclockwise.

See also translate(), scale(), shear(), resetXForm(), setWorldMatrix(), and xForm().

Examples: aclock/aclock.cpp, t10/cannon.cpp, and t9/cannon.cpp.

void TQPainter::save ()

Saves the current painter state (pushes the state onto a stack). A save() must be followed by a corresponding restore(). end() unwinds the stack.

See also restore().

Example: aclock/aclock.cpp.

void TQPainter::saveWorldMatrix ()

This function is obsolete. It is provided to keep old source working. We strongly advise against using it in new code.

We recommend using save() instead.

void TQPainter::scale ( double sx, double sy )

Scales the coordinate system by (sx, sy).

See also translate(), shear(), rotate(), resetXForm(), setWorldMatrix(), and xForm().

Example: xform/xform.cpp.

void TQPainter::setBackgroundColor ( const TQColor & c )

Sets the background color of the painter to c.

The background color is the color that is filled in when drawing opaque text, stippled lines and bitmaps. The background color has no effect in transparent background mode (which is the default).

See also backgroundColor(), setBackgroundMode(), and BackgroundMode.

void TQPainter::setBackgroundMode ( BGMode m )

Sets the background mode of the painter to m, which must be either TransparentMode (the default) or OpaqueMode.

Transparent mode draws stippled lines and text without setting the background pixels. Opaque mode fills these space with the current background color.

Note that in order to draw a bitmap or pixmap transparently, you must use TQPixmap::setMask().

See also backgroundMode() and setBackgroundColor().

Example: picture/picture.cpp.

void TQPainter::setBrush ( BrushStyle style )

Sets the painter's brush to black color and the specified style.

See also brush() and TQBrush.

Examples: aclock/aclock.cpp, drawdemo/drawdemo.cpp, picture/picture.cpp, t10/cannon.cpp, t9/cannon.cpp, themes/wood.cpp, and tooltip/tooltip.cpp.

void TQPainter::setBrush ( const TQBrush & brush )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Sets the painter's brush to brush.

The brush defines how shapes are filled.

See also brush().

void TQPainter::setBrush ( const TQColor & color )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Sets the painter's brush to have style SolidPattern and the specified color.

See also brush() and TQBrush.

void TQPainter::setBrushOrigin ( int x, int y )

Sets the brush origin to (x, y).

The brush origin specifies the (0, 0) coordinate of the painter's brush. This setting only applies to pattern brushes and pixmap brushes.

See also brushOrigin().

void TQPainter::setBrushOrigin ( const TQPoint & p )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Sets the brush origin to point p.

void TQPainter::setClipRect ( int x, int y, int w, int h, CoordinateMode m = CoordDevice )

Sets the clip region to the rectangle x, y, w, h and enables clipping. The clip mode is set to m.

If m is CoordDevice (the default), the coordinates given for the clip region are taken to be physical device coordinates and are not subject to any coordinate transformations. If m is CoordPainter, the coordinates given for the clip region are taken to be model coordinates.

See also setClipRegion(), clipRegion(), setClipping(), and TQPainter::CoordinateMode.

Examples: grapher/grapher.cpp, progress/progress.cpp, showimg/showimg.cpp, splitter/splitter.cpp, and trivial/trivial.cpp.

void TQPainter::setClipRect ( const TQRect & r, CoordinateMode m = CoordDevice )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Sets the clip region to the rectangle r and enables clipping. The clip mode is set to m.

See also CoordinateMode.

void TQPainter::setClipRegion ( const TQRegion & rgn, CoordinateMode m = CoordDevice )

Sets the clip region to rgn and enables clipping. The clip mode is set to m.

Note that the clip region is given in physical device coordinates and not subject to any coordinate transformation.

See also setClipRect(), clipRegion(), setClipping(), and CoordinateMode.

Examples: qfd/fontdisplayer.cpp and themes/wood.cpp.

void TQPainter::setClipping ( bool enable )

Enables clipping if enable is TRUE, or disables clipping if enable is FALSE.

See also hasClipping(), setClipRect(), and setClipRegion().

Example: themes/wood.cpp.

void TQPainter::setFont ( const TQFont & font )

Sets the painter's font to font.

This font is used by subsequent drawText() functions. The text color is the same as the pen color.

See also font() and drawText().

Examples: drawdemo/drawdemo.cpp, grapher/grapher.cpp, hello/hello.cpp, picture/picture.cpp, qwerty/qwerty.cpp, t13/cannon.cpp, and xform/xform.cpp.

void TQPainter::setPen ( const TQPen & pen )

Sets a new painter pen.

The pen defines how to draw lines and outlines, and it also defines the text color.

See also pen().

Examples: desktop/desktop.cpp, drawdemo/drawdemo.cpp, progress/progress.cpp, t9/cannon.cpp, themes/metal.cpp, and themes/wood.cpp.

void TQPainter::setPen ( PenStyle style )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Sets the painter's pen to have style style, width 0 and black color.

See also pen() and TQPen.

void TQPainter::setPen ( const TQColor & color )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Sets the painter's pen to have style SolidLine, width 0 and the specified color.

See also pen() and TQPen.

void TQPainter::setRasterOp ( RasterOp r )

Sets the raster operation to r. The default is CopyROP.

See also rasterOp() and TQt::RasterOp.

void TQPainter::setTabArray ( int * ta )

Sets the tab stop array to ta. This puts tab stops at ta[0], ta[1] and so on. The array is null-terminated.

If both a tab array and a tab top size is set, the tab array wins.

See also tabArray(), setTabStops(), drawText(), and fontMetrics().

void TQPainter::setTabStops ( int ts )

Set the tab stop width to ts, i.e. locates tab stops at ts, 2*ts, 3*ts and so on.

Tab stops are used when drawing formatted text with ExpandTabs set. This fixed tab stop value is used only if no tab array is set (which is the default case).

A value of 0 (the default) implies a tabstop setting of 8 times the width of the character 'x' in the font currently set on the painter.

See also tabStops(), setTabArray(), drawText(), and fontMetrics().

void TQPainter::setViewXForm ( bool enable )

Enables view transformations if enable is TRUE, or disables view transformations if enable is FALSE.

See also hasViewXForm(), setWindow(), setViewport(), setWorldMatrix(), setWorldXForm(), and xForm().

void TQPainter::setViewport ( int x, int y, int w, int h )

Sets the viewport rectangle view transformation for the painter and enables view transformation.

The viewport rectangle is part of the view transformation. The viewport specifies the device coordinate system and is specified by the x, y, w width and h height parameters. Its sister, the window(), specifies the logical coordinate system.

The default viewport rectangle is the same as the device's rectangle. See the Coordinate System Overview for an overview of coordinate transformation.

See also viewport(), setWindow(), setViewXForm(), setWorldMatrix(), setWorldXForm(), and xForm().

Example: aclock/aclock.cpp.

void TQPainter::setViewport ( const TQRect & r )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Sets the painter's viewport to rectangle r.

void TQPainter::setWindow ( int x, int y, int w, int h )

Sets the window rectangle view transformation for the painter and enables view transformation.

The window rectangle is part of the view transformation. The window specifies the logical coordinate system and is specified by the x, y, w width and h height parameters. Its sister, the viewport(), specifies the device coordinate system.

The default window rectangle is the same as the device's rectangle. See the Coordinate System Overview for an overview of coordinate transformation.

See also window(), setViewport(), setViewXForm(), setWorldMatrix(), and setWorldXForm().

Examples: aclock/aclock.cpp and drawdemo/drawdemo.cpp.

void TQPainter::setWindow ( const TQRect & r )

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Sets the painter's window to rectangle r.

void TQPainter::setWorldMatrix ( const TQWMatrix & m, bool combine = FALSE )

Sets the world transformation matrix to m and enables world transformation.

If combine is TRUE, then m is combined with the current transformation matrix, otherwise m replaces the current transformation matrix.

If m is the identity matrix and combine is FALSE, this function calls setWorldXForm(FALSE). (The identity matrix is the matrix where TQWMatrix::m11() and TQWMatrix::m22() are 1.0 and the rest are 0.0.)

World transformations are applied after the view transformations (i.e. window and viewport).

The following functions can transform the coordinate system without using a TQWMatrix:

They operate on the painter's worldMatrix() and are implemented like this:

        void TQPainter::rotate( double a )
        {
            TQWMatrix m;
            m.rotate( a );
            setWorldMatrix( m, TRUE );
        }
    

Note that you should always use combine when you are drawing into a TQPicture. Otherwise it may not be possible to replay the picture with additional transformations. Using translate(), scale(), etc., is safe.

For a brief overview of coordinate transformation, see the Coordinate System Overview.

See also worldMatrix(), setWorldXForm(), setWindow(), setViewport(), setViewXForm(), xForm(), and TQWMatrix.

Examples: drawdemo/drawdemo.cpp and xform/xform.cpp.

void TQPainter::setWorldXForm ( bool enable )

Enables world transformations if enable is TRUE, or disables world transformations if enable is FALSE. The world transformation matrix is not changed.

See also setWorldMatrix(), setWindow(), setViewport(), setViewXForm(), and xForm().

void TQPainter::shear ( double sh, double sv )

Shears the coordinate system by (sh, sv).

See also translate(), scale(), rotate(), resetXForm(), setWorldMatrix(), and xForm().

int * TQPainter::tabArray () const

Returns the currently set tab stop array.

See also setTabArray().

int TQPainter::tabStops () const

Returns the tab stop setting.

See also setTabStops().

void TQPainter::translate ( double dx, double dy )

Translates the coordinate system by (dx, dy). After this call, (dx, dy) is added to points.

For example, the following code draws the same point twice:

        void MyWidget::paintEvent()
        {
            TQPainter paint( this );

            paint.drawPoint( 0, 0 );

            paint.translate( 100.0, 40.0 );
            paint.drawPoint( -100, -40 );
        }
    

See also scale(), shear(), rotate(), resetXForm(), setWorldMatrix(), and xForm().

Examples: action/application.cpp, application/application.cpp, t10/cannon.cpp, t9/cannon.cpp, themes/metal.cpp, themes/wood.cpp, and xform/xform.cpp.

TQRect TQPainter::viewport () const

Returns the viewport rectangle.

See also setViewport() and setViewXForm().

Example: aclock/aclock.cpp.

TQRect TQPainter::window () const

Returns the window rectangle.

See also setWindow() and setViewXForm().

const TQWMatrix & TQPainter::worldMatrix () const

Returns the world transformation matrix.

See also setWorldMatrix().

TQPoint TQPainter::xForm ( const TQPoint & pv ) const

Returns the point pv transformed from model coordinates to device coordinates.

See also xFormDev() and TQWMatrix::map().

TQRect TQPainter::xForm ( const TQRect & rv ) const

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Returns the rectangle rv transformed from model coordinates to device coordinates.

If world transformation is enabled and rotation or shearing has been specified, then the bounding rectangle is returned.

See also xFormDev() and TQWMatrix::map().

TQPointArray TQPainter::xForm ( const TQPointArray & av ) const

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Returns the point array av transformed from model coordinates to device coordinates.

See also xFormDev() and TQWMatrix::map().

TQPointArray TQPainter::xForm ( const TQPointArray & av, int index, int npoints ) const

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Returns the point array av transformed from model coordinates to device coordinates. The index is the first point in the array and npoints denotes the number of points to be transformed. If npoints is negative, all points from av[index] until the last point in the array are transformed.

The returned point array consists of the number of points that were transformed.

Example:

        TQPointArray a(10);
        TQPointArray b;
        b = painter.xForm(a, 2, 4);  // b.size() == 4
        b = painter.xForm(a, 2, -1); // b.size() == 8
    

See also xFormDev() and TQWMatrix::map().

TQRect TQPainter::xFormDev ( const TQRect & rd ) const

Returns the rectangle rd transformed from device coordinates to model coordinates.

If world transformation is enabled and rotation or shearing is used, then the bounding rectangle is returned.

See also xForm() and TQWMatrix::map().

TQPoint TQPainter::xFormDev ( const TQPoint & pd ) const

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Returns the point pd transformed from device coordinates to model coordinates.

See also xForm() and TQWMatrix::map().

TQPointArray TQPainter::xFormDev ( const TQPointArray & ad ) const

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Returns the point array ad transformed from device coordinates to model coordinates.

See also xForm() and TQWMatrix::map().

TQPointArray TQPainter::xFormDev ( const TQPointArray & ad, int index, int npoints ) const

This is an overloaded member function, provided for convenience. It behaves essentially like the above function.

Returns the point array ad transformed from device coordinates to model coordinates. The index is the first point in the array and npoints denotes the number of points to be transformed. If npoints is negative, all points from ad[index] until the last point in the array are transformed.

The returned point array consists of the number of points that were transformed.

Example:

        TQPointArray a(10);
        TQPointArray b;
        b = painter.xFormDev(a, 1, 3);  // b.size() == 3
        b = painter.xFormDev(a, 1, -1); // b.size() == 9
    

See also xForm() and TQWMatrix::map().


Related Functions

void qDrawPlainRect ( TQPainter * p, int x, int y, int w, int h, const TQColor & c, int lineWidth, const TQBrush * fill )

#include <ntqdrawutil.h>

Draws the plain rectangle specified by (x, y, w, h) using the painter p.

The color argument c specifies the line color.

The lineWidth argument specifies the line width.

The rectangle's interior is filled with the fill brush unless fill is 0.

If you want to use a TQFrame widget instead, you can make it display a plain rectangle, for example TQFrame::setFrameStyle( TQFrame::Box | TQFrame::Plain ).

Warning: This function does not look at TQWidget::style() or TQApplication::style(). Use the drawing functions in TQStyle to make widgets that follow the current GUI style.

See also qDrawShadeRect() and TQStyle::drawPrimitive().

void qDrawShadeLine ( TQPainter * p, int x1, int y1, int x2, int y2, const TQColorGroup & g, bool sunken, int lineWidth, int midLineWidth )

#include <ntqdrawutil.h>

Draws a horizontal (y1 == y2) or vertical (x1 == x2) shaded line using the painter p.

Nothing is drawn if y1 != y2 and x1 != x2 (i.e. the line is neither horizontal nor vertical).

The color group argument g specifies the shading colors (light, dark and middle colors).

The line appears sunken if sunken is TRUE, or raised if sunken is FALSE.

The lineWidth argument specifies the line width for each of the lines. It is not the total line width.

The midLineWidth argument specifies the width of a middle line drawn in the TQColorGroup::mid() color.

If you want to use a TQFrame widget instead, you can make it display a shaded line, for example TQFrame::setFrameStyle( TQFrame::HLine | TQFrame::Sunken ).

Warning: This function does not look at TQWidget::style() or TQApplication::style(). Use the drawing functions in TQStyle to make widgets that follow the current GUI style.

See also qDrawShadeRect(), qDrawShadePanel(), and TQStyle::drawPrimitive().

void qDrawShadePanel ( TQPainter * p, int x, int y, int w, int h, const TQColorGroup & g, bool sunken, int lineWidth, const TQBrush * fill )

#include <ntqdrawutil.h>

Draws the shaded panel specified by (x, y, w, h) using the painter p.

The color group argument g specifies the shading colors (light, dark and middle colors).

The panel appears sunken if sunken is TRUE, or raised if sunken is FALSE.

The lineWidth argument specifies the line width.

The panel's interior is filled with the fill brush unless fill is 0.

If you want to use a TQFrame widget instead, you can make it display a shaded panel, for example TQFrame::setFrameStyle( TQFrame::Panel | TQFrame::Sunken ).

Warning: This function does not look at TQWidget::style() or TQApplication::style(). Use the drawing functions in TQStyle to make widgets that follow the current GUI style.

See also qDrawWinPanel(), qDrawShadeLine(), qDrawShadeRect(), and TQStyle::drawPrimitive().

void qDrawShadeRect ( TQPainter * p, int x, int y, int w, int h, const TQColorGroup & g, bool sunken, int lineWidth, int midLineWidth, const TQBrush * fill )

#include <ntqdrawutil.h>

Draws the shaded rectangle specified by (x, y, w, h) using the painter p.

The color group argument g specifies the shading colors (light, dark and middle colors).

The rectangle appears sunken if sunken is TRUE, or raised if sunken is FALSE.

The lineWidth argument specifies the line width for each of the lines. It is not the total line width.

The midLineWidth argument specifies the width of a middle line drawn in the TQColorGroup::mid() color.

The rectangle's interior is filled with the fill brush unless fill is 0.

If you want to use a TQFrame widget instead, you can make it display a shaded rectangle, for example TQFrame::setFrameStyle( TQFrame::Box | TQFrame::Raised ).

Warning: This function does not look at TQWidget::style() or TQApplication::style(). Use the drawing functions in TQStyle to make widgets that follow the current GUI style.

See also qDrawShadeLine(), qDrawShadePanel(), qDrawPlainRect(), TQStyle::drawItem(), TQStyle::drawControl(), and TQStyle::drawComplexControl().

void qDrawWinButton ( TQPainter * p, int x, int y, int w, int h, const TQColorGroup & g, bool sunken, const TQBrush * fill )

#include <ntqdrawutil.h>

Draws the Windows-style button specified by (x, y, w, h) using the painter p.

The color group argument g specifies the shading colors (light, dark and middle colors).

The button appears sunken if sunken is TRUE, or raised if sunken is FALSE.

The line width is 2 pixels.

The button's interior is filled with the *fill brush unless fill is 0.

Warning: This function does not look at TQWidget::style() or TQApplication::style(). Use the drawing functions in TQStyle to make widgets that follow the current GUI style.

See also qDrawWinPanel() and TQStyle::drawControl().

void qDrawWinPanel ( TQPainter * p, int x, int y, int w, int h, const TQColorGroup & g, bool sunken, const TQBrush * fill )

#include <ntqdrawutil.h>

Draws the Windows-style panel specified by (x, y, w, h) using the painter p.

The color group argument g specifies the shading colors.

The panel appears sunken if sunken is TRUE, or raised if sunken is FALSE.

The line width is 2 pixels.

The button's interior is filled with the fill brush unless fill is 0.

If you want to use a TQFrame widget instead, you can make it display a shaded panel, for example TQFrame::setFrameStyle( TQFrame::WinPanel | TQFrame::Raised ).

Warning: This function does not look at TQWidget::style() or TQApplication::style(). Use the drawing functions in TQStyle to make widgets that follow the current GUI style.

See also qDrawShadePanel(), qDrawWinButton(), and TQStyle::drawPrimitive().


This file is part of the TQt toolkit. Copyright © 1995-2007 Trolltech. All Rights Reserved.


Copyright © 2007 TrolltechTrademarks
TQt 3.3.8