| Home | All Classes | Main Classes | Annotated | Grouped Classes | Functions | |
The TQDataStream class provides serialization of binary data to a TQIODevice. More...
All the functions in this class are reentrant when TQt is built with thread support.
#include <ntqdatastream.h>
A data stream is a binary stream of encoded information which is 100% independent of the host computer's operating system, CPU or byte order. For example, a data stream that is written by a PC under Windows can be read by a Sun SPARC running Solaris.
You can also use a data stream to read/write raw unencoded binary data. If you want a "parsing" input stream, see TQTextStream.
The TQDataStream class implements the serialization of C++'s basic data types, like char, short, int, char*, etc. Serialization of more complex data is accomplished by breaking up the data into primitive units.
A data stream cooperates closely with a TQIODevice. A TQIODevice represents an input/output medium one can read data from and write data to. The TQFile class is an example of an IO device.
Example (write binary data to a stream):
TQFile file( "file.dat" );
file.open( IO_WriteOnly );
TQDataStream stream( &file ); // we will serialize the data into the file
stream << "the answer is"; // serialize a string
stream << (TQ_INT32)42; // serialize an integer
Example (read binary data from a stream):
TQFile file( "file.dat" );
file.open( IO_ReadOnly );
TQDataStream stream( &file ); // read the data serialized from the file
TQString str;
TQ_INT32 a;
stream >> str >> a; // extract "the answer is" and 42
Each item written to the stream is written in a predefined binary format that varies depending on the item's type. Supported TQt types include TQBrush, TQColor, TQDateTime, TQFont, TQPixmap, TQString, TQVariant and many others. For the complete list of all TQt types supporting data streaming see the Format of the TQDataStream operators.
For integers it is best to always cast to a TQt integer type for writing, and to read back into the same TQt integer type. This ensures that you get integers of the size you want and insulates you from compiler and platform differences.
To take one example, a char* string is written as a 32-bit integer equal to the length of the string including the NUL byte ('\0'), followed by all the characters of the string including the NUL byte. When reading a char* string, 4 bytes are read to create the 32-bit length value, then that many characters for the char* string including the NUL are read.
The initial IODevice is usually set in the constructor, but can be changed with setDevice(). If you've reached the end of the data (or if there is no IODevice set) atEnd() will return TRUE.
If you want the data to be compatible with an earlier version of TQt use setVersion().
If you want the data to be human-readable, e.g. for debugging, you can set the data stream into printable data mode with setPrintableData(). The data is then written slower, in a bloated but human readable format.
If you are producing a new binary data format, such as a file format for documents created by your application, you could use a TQDataStream to write the data in a portable format. Typically, you would write a brief header containing a magic string and a version number to give yourself room for future expansion. For example:
TQFile file( "file.xxx" );
file.open( IO_WriteOnly );
TQDataStream stream( &file );
// Write a header with a "magic number" and a version
stream << (TQ_UINT32)0xA0B0C0D0;
stream << (TQ_INT32)123;
// Write the data
stream << [lots of interesting data]
Then read it in with:
TQFile file( "file.xxx" );
file.open( IO_ReadOnly );
TQDataStream stream( &file );
// Read and check the header
TQ_UINT32 magic;
stream >> magic;
if ( magic != 0xA0B0C0D0 )
return XXX_BAD_FILE_FORMAT;
// Read the version
TQ_INT32 version;
stream >> version;
if ( version < 100 )
return XXX_BAD_FILE_TOO_OLD;
if ( version > 123 )
return XXX_BAD_FILE_TOO_NEW;
if ( version <= 110 )
stream.setVersion(1);
// Read the data
stream >> [lots of interesting data];
if ( version > 120 )
stream >> [data new in XXX version 1.2];
stream >> [other interesting data];
You can select which byte order to use when serializing data. The default setting is big endian (MSB first). Changing it to little endian breaks the portability (unless the reader also changes to little endian). We recommend keeping this setting unless you have special requirements.
You may wish to read/write your own raw binary data to/from the data stream directly. Data may be read from the stream into a preallocated char* using readRawBytes(). Similarly data can be written to the stream using writeRawBytes(). Notice that any encoding/decoding of the data must be done by you.
A similar pair of functions is readBytes() and writeBytes(). These differ from their raw counterparts as follows: readBytes() reads a TQ_UINT32 which is taken to be the length of the data to be read, then that number of bytes is read into the preallocated char*; writeBytes() writes a TQ_UINT32 containing the length of the data, followed by the data. Notice that any encoding/decoding of the data (apart from the length TQ_UINT32) must be done by you.
See also TQTextStream, TQVariant, and Input/Output and Networking.
The byte order used for reading/writing the data.
See also setDevice().
Warning: If you use TQSocket or TQSocketDevice as the IO device d for reading data, you must make sure that enough data is available on the socket for the operation to successfully proceed; TQDataStream does not have any means to handle or recover from short-reads.
See also setDevice() and device().
Example:
static char bindata[] = { 231, 1, 44, ... };
TQByteArray a;
a.setRawData( bindata, sizeof(bindata) ); // a points to bindata
TQDataStream stream( a, IO_ReadOnly ); // open on a's data
stream >> [something]; // read raw bindata
a.resetRawData( bindata, sizeof(bindata) ); // finished
The TQByteArray::setRawData() function is not for the inexperienced.
The destructor will not affect the current IO device, unless it is an internal IO device processing a TQByteArray passed in the constructor, in which case the internal IO device is destroyed.
Returns TRUE if the IO device has reached the end position (end of the stream or file) or if there is no IO device set; otherwise returns FALSE, i.e. if the current position of the IO device is before the end position.
See also TQIODevice::atEnd().
Returns the current byte order setting -- either BigEndian or LittleEndian.
See also setByteOrder().
Returns the IO device currently set.
See also setDevice() and unsetDevice().
This function is obsolete. It is provided to keep old source working. We strongly advise against using it in new code.
Returns TRUE if the IO device has reached the end position (end of stream or file) or if there is no IO device set.
Returns FALSE if the current position of the read/write head of the IO device is somewhere before the end position.
See also TQIODevice::atEnd().
Returns TRUE if the printable data flag has been set; otherwise returns FALSE.
See also setPrintableData().
Writes an unsigned byte, i, to the stream and returns a reference to the stream.
Writes a signed 16-bit integer, i, to the stream and returns a reference to the stream.
Writes an unsigned 16-bit integer, i, to the stream and returns a reference to the stream.
Writes a signed 32-bit integer, i, to the stream and returns a reference to the stream.
Writes an unsigned integer, i, to the stream as a 32-bit unsigned integer (TQ_UINT32). Returns a reference to the stream.
Writes a signed 64-bit integer, i, to the stream and returns a reference to the stream.
Writes an unsigned 64-bit integer, i, to the stream and returns a reference to the stream.
Writes a signed integer i, of the system's word length, to the stream and returns a reference to the stream.
Writes an unsigned integer i, of the system's word length, to the stream and returns a reference to the stream.
Writes a 32-bit floating point number, f, to the stream using the standard IEEE754 format. Returns a reference to the stream.
Writes a 64-bit floating point number, f, to the stream using the standard IEEE754 format. Returns a reference to the stream.
Writes the '\0'-terminated string s to the stream and returns a reference to the stream.
The string is serialized using writeBytes().
Reads an unsigned byte from the stream into i, and returns a reference to the stream.
Reads a signed 16-bit integer from the stream into i, and returns a reference to the stream.
Reads an unsigned 16-bit integer from the stream into i, and returns a reference to the stream.
Reads a signed 32-bit integer from the stream into i, and returns a reference to the stream.
Reads an unsigned 32-bit integer from the stream into i, and returns a reference to the stream.
Reads a signed 64-bit integer from the stream into i, and returns a reference to the stream.
Reads an unsigned 64-bit integer from the stream, into i, and returns a reference to the stream.
Reads a signed integer of the system's word length from the stream into i, and returns a reference to the stream.
Reads an unsigned integer of the system's word length from the stream, into i, and returns a reference to the stream.
Reads a 32-bit floating point number from the stream into f, using the standard IEEE754 format. Returns a reference to the stream.
Reads a 64-bit floating point number from the stream into f, using the standard IEEE754 format. Returns a reference to the stream.
Reads the '\0'-terminated string s from the stream and returns a reference to the stream.
Space for the string is allocated using new -- the caller must destroy it with delete[].
The buffer s is allocated using new. Destroy it with the delete[] operator. If the length is zero or s cannot be allocated, s is set to 0.
The l parameter will be set to the length of the buffer.
The serialization format is a TQ_UINT32 length specifier first, then l bytes of data. Note that the data is not encoded.
See also readRawBytes() and writeBytes().
The buffer s must be preallocated. The data is not encoded.
See also readBytes(), TQIODevice::readBlock(), and writeRawBytes().
The bo parameter can be TQDataStream::BigEndian or TQDataStream::LittleEndian.
The default setting is big endian. We recommend leaving this setting unless you have special requirements.
See also byteOrder().
Sets the IO device to d.
See also device() and unsetDevice().
If enable is TRUE, data will be output in a human readable format. If enable is FALSE, data will be output in a binary format.
If enable is TRUE, the write functions will generate output that consists of printable characters (7 bit ASCII). This output will typically be a lot larger than the default binary output, and consequently slower to write.
We recommend only enabling printable data for debugging purposes.
Sets the version number of the data serialization format to v.
You don't need to set a version if you are using the current version of TQt.
In order to accommodate new functionality, the datastream serialization format of some TQt classes has changed in some versions of TQt. If you want to read data that was created by an earlier version of TQt, or write data that can be read by a program that was compiled with an earlier version of TQt, use this function to modify the serialization format of TQDataStream.
| TQt Version | TQDataStream Version |
|---|---|
| TQt 3.3 | 6 |
| TQt 3.2 | 5 |
| TQt 3.1 | 5 |
| TQt 3.0 | 4 |
| TQt 2.1.x and TQt 2.2.x | 3 |
| TQt 2.0.x | 2 |
| TQt 1.x | 1 |
See also version().
See also device() and setDevice().
Returns the version number of the data serialization format. In TQt 3.1, this number is 5.
See also setVersion().
The len is serialized as a TQ_UINT32, followed by len bytes from s. Note that the data is not encoded.
See also writeRawBytes() and readBytes().
See also writeBytes(), TQIODevice::writeBlock(), and readRawBytes().
This file is part of the TQt toolkit. Copyright © 1995-2007 Trolltech. All Rights Reserved.
| Copyright © 2007 Trolltech | Trademarks | TQt 3.3.8
|