You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
keximdb/configure.in

381 lines
13 KiB

dnl =======================================================
dnl FILE: ./admin/configure.in.min
dnl =======================================================
dnl This file is part of the KDE libraries/packages
dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
dnl This file is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Library General Public
dnl License as published by the Free Software Foundation; either
dnl version 2 of the License, or (at your option) any later version.
dnl This library is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl Library General Public License for more details.
dnl You should have received a copy of the GNU Library General Public License
dnl along with this library; see the file COPYING.LIB. If not, write to
dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
dnl Boston, MA 02110-1301, USA.
# Original Author was Kalle@kde.org
# I lifted it in some mater. (Stephan Kulow)
# I used much code from Janos Farkas
dnl Process this file with autoconf to produce a configure script.
AC_INIT(acinclude.m4) dnl a source file from your sub dir
dnl This is so we can use kde-common
AC_CONFIG_AUX_DIR(admin)
dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
unset CDPATH
dnl Checking host/target/build systems, for make, install etc.
AC_CANONICAL_SYSTEM
dnl Perform program name transformation
AC_ARG_PROGRAM
dnl Automake doc recommends to do this only here. (Janos)
AM_INIT_AUTOMAKE(keximdb-1.1.0, "3.5.5") dnl searches for some needed programs
KDE_SET_PREFIX
dnl generate the config header
AM_CONFIG_HEADER(config.h) dnl at the distribution this done
dnl Checks for programs.
AC_CHECK_COMPILERS
AC_ENABLE_SHARED(yes)
AC_ENABLE_STATIC(no)
KDE_PROG_LIBTOOL
dnl for NLS support. Call them in this order!
dnl WITH_NLS is for the po files
AM_KDE_WITH_NLS
KDE_USE_QT(3.3)
AC_PATH_KDE
dnl =======================================================
dnl FILE: configure.in.in
dnl =======================================================
#MIN_CONFIG(3.3)
# Define a symbol, to know that we're compiling WITH kde. (for apps that
# can compile without KDE, optionally)
AM_CONDITIONAL(KDE_INSTALLED, test "$have_kde" = "yes")
dnl Checks for header files.
AC_HEADER_DIRENT
AC_HEADER_STDC
AC_CHECK_HEADERS(fcntl.h sys/time.h sys/stat.h stdint.h)
AC_CHECK_HEADERS(sys/cdefs.h fnmatch.h sysent.h strings.h paths.h)
AC_CHECK_HEADERS(utmp.h sys/param.h linux/tcp.h sys/proc.h)
dnl Checks for typedefs, structures, and compiler characteristics.
AC_HEADER_TIME
AC_C_LONG_DOUBLE
dnl Checks for library functions.
KDE_CHECK_DLOPEN
AC_CHECK_FUNCS(socket fabsl strdup vsnprintf re_comp flock)
AC_CHECK_SETENV
AC_CHECK_UNSETENV
AC_CHECK_GETDOMAINNAME
AC_CHECK_GETHOSTNAME
AM_PROG_LEX
LFLAGS="-o${LEX_OUTPUT_ROOT}.c"
AC_SUBST(LFLAGS)
dnl =======================================================
dnl FILE: ./keximdb/configure.in.in
dnl =======================================================
#MIN_CONFIG(3.0)
dnl PACKAGE set before
AC_C_BIGENDIAN
AC_CHECK_KDEMAXPATHLEN
dnl ----------------------------------------------------------------------
dnl These checks based on those in arts configure.in.in
dnl Check for pkg-config
AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
if test "$PKG_CONFIG" = "no"; then
AC_MSG_ERROR([This package requires pkg-config.])
fi
dnl Check for Glib-2.0
# GLIB_CFLAGS: cflags for compiling glib dependant sources
# GLIB_LIBADD: glib libraries (-l options)
# GLIB_LDFLAGS: flags containing path to glib libraries (-L options)
GLIB_PACKAGES="glib-2.0"
GLIB_VERSION="2.4"
AC_MSG_CHECKING(for GLib-2.0 (at least $GLIB_VERSION))
if $PKG_CONFIG --atleast-pkgconfig-version 0.15 ; then
if $PKG_CONFIG --atleast-version $GLIB_VERSION $GLIB_PACKAGES >/dev/null 2>&1 ; then
GLIB_CFLAGS="`$PKG_CONFIG --cflags $GLIB_PACKAGES`"
GLIB_LIBADD="`$PKG_CONFIG --libs-only-l --libs-only-other $GLIB_PACKAGES`"
GLIB_LDFLAGS="`$PKG_CONFIG --libs-only-L $GLIB_PACKAGES`"
AC_MSG_RESULT(yes)
fi
else
if $PKG_CONFIG --atleast-version $GLIB_VERSION $GLIB_PACKAGES >/dev/null 2>&1 ; then
GLIB_CFLAGS="`$PKG_CONFIG --cflags $GLIB_PACKAGES`"
GLIB_LIBADD="`$PKG_CONFIG --libs-only-l $GLIB_PACKAGES`"
GLIB_LDFLAGS="`$PKG_CONFIG --libs-only-L $GLIB_PACKAGES`"
AC_MSG_RESULT(yes)
AC_MSG_WARN([building keximdb with pkg-config < 0.15 is untested.])
fi
fi
if test -z "$GLIB_LIBADD"; then
AC_MSG_RESULT(not installed)
AC_ERROR([Please install glib-2.0 (see http://www.gtk.org).])
DO_NOT_COMPILE="$DO_NOT_COMPILE keximdb"
fi
# Build without optimisation. Anything higher than -O0 here causes
# a crash in mdb_read_indices on Northwind.
CFLAGS=`echo "$CFLAGS" | sed 's/ -O2 / -O0 /g'`
AC_SUBST(GLIB_CFLAGS)
AC_SUBST(GLIB_LIBADD)
AC_SUBST(GLIB_LDFLAGS)
dnl ----------------------------------------------------------------------
dnl =======================================================
dnl FILE: ./keximdb/src/keximdb/configure.in.in
dnl =======================================================
dnl ======================================================================
dnl Configure checks for KexiDB
dnl
dnl This ought to be simple - use tde-config to find headers and libraries
dnl and link against them:
dnl `tde-config --prefix`/include
dnl However, tde-config doesn't return the expected directory on Debian
dnl (for one), which installs kde headers to /usr/include/kde.
dnl
dnl So the plan for headers is to check:
dnl `tde-config --prefix`/include,
dnl `tde-config --prefix`/kde/include,
dnl any other place we might find them
dnl Then for libraries, check
dnl `tde-config --prefix`/include,
dnl any other place we might find them
dnl ======================================================================
# Configure overrides
AC_ARG_WITH(kexidb_includes,
AC_HELP_STRING([--with-kexidb-includes=DIR],
[use KexiDB-includes installed in this directory]),
[ac_kexidb_incdir=$withval],
ac_kexidb_incdir="")
AC_ARG_WITH(kexidb_libraries,
AC_HELP_STRING([--with-kexidb-libraries=DIR],
[use KexiDB-libs installed in this directory ]),
[ac_kexidb_libdir=$withval],
ac_kexidb_libdir="")
# Find tde-config
if test "$ac_kexidb_incdir" = "" -o "$ac_kexidb_libdir" = "" ; then
KDE_FIND_PATH(kde_config,KDE_CONFIG,
[${prefix}/bin ${exec_prefix}/bin /usr/local/bin /opt/local/bin /usr/bin
/opt/kde/bin ],
[AC_MSG_ERROR([Could not find tde-config anywhere])])
kde_prefix=`$KDE_CONFIG --prefix`
fi
# Find include dir
if test "$ac_kexidb_incdir" = "" ; then
AC_MSG_CHECKING([for KexiDB headers])
kexidb_incdirs="$kde_prefix/include $kde_prefix/include/tde /usr/include /usr/include/tde /usr/local/include /opt/kde/include"
AC_FIND_FILE("kexidb/driver.h", $kexidb_incdirs, kexidb_incdir)
if test ! -r $kexidb_incdir/kexidb/driver.h; then
AC_MSG_RESULT([Could not find the required KexiDB HEADER files.])
else
AC_MSG_RESULT([$kexidb_incdir])
KEXIDB_INC=$kexidb_incdir
fi
else
KEXIDB_INC=$ac_kexidb_incdir
fi
# Find lib dir
if test "$ac_kexidb_libdir" = "" ; then
AC_MSG_CHECKING([for KexiDB libraries])
kexidb_libdirs="$kde_prefix/lib /usr/lib /usr/local/lib /opt/kde/lib"
AC_FIND_FILE(libkexidb.so, $kexidb_libdirs, kexidb_libdir)
if test ! -r $kexidb_libdir/libkexidb.so ; then
AC_MSG_RESULT([Could not find the required KexiDB LIBRARY files.])
else
AC_MSG_RESULT([$kexidb_libdir])
KEXIDB_LIB=$kexidb_libdir
fi
else
KEXIDB_LIB=$ac_kexidb_libdir
fi
AC_SUBST(KEXIDB_INC)
AC_SUBST(KEXIDB_LIB)
dnl =======================================================
dnl FILE: ./keximdb/src/mdbtools/configure.in.in
dnl =======================================================
AC_CHECK_HEADERS(fcntl.h wordexp.h)
dnl Checks for typedefs, structures, and compiler characteristics.
AC_C_CONST
dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
dnl those with the standalone portable GNU libiconv installed).
AC_ARG_WITH([libiconv-prefix],
AC_HELP_STRING([--with-libiconv-prefix=DIR], [search for libiconv in DIR/include and DIR/lib]), [
for dir in `echo "$withval" | tr : ' '`; do
if test -d $dir/include; then CPPFLAGS="$CPPFLAGS -I$dir/include"; fi
if test -d $dir/lib; then LDFLAGS="$LDFLAGS -L$dir/lib"; fi
done
])
AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
AC_TRY_LINK([#include <stdlib.h>
#include <iconv.h>],
[iconv_t cd = iconv_open("","");
iconv(cd,NULL,NULL,NULL,NULL);
iconv_close(cd);],
am_cv_func_iconv=yes)
if test "$am_cv_func_iconv" != yes; then
am_save_LIBS="$LIBS"
LIBS="$LIBS -liconv"
AC_TRY_LINK([#include <stdlib.h>
#include <iconv.h>],
[iconv_t cd = iconv_open("","");
iconv(cd,NULL,NULL,NULL,NULL);
iconv_close(cd);],
am_cv_lib_iconv=yes
am_cv_func_iconv=yes)
LIBS="$am_save_LIBS"
fi
])
if test "$am_cv_func_iconv" = yes; then
AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
AC_MSG_CHECKING([for iconv declaration])
AC_CACHE_VAL(am_cv_proto_iconv, [
AC_TRY_COMPILE([
#include <stdlib.h>
#include <iconv.h>
extern
#ifdef __cplusplus
"C"
#endif
#if defined(__STDC__) || defined(__cplusplus)
size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
#else
size_t iconv();
#endif
], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
AC_MSG_RESULT([$]{ac_t:-
}[$]am_cv_proto_iconv)
AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
[Define as const if the declaration of iconv() needs const.])
fi
LIBICONV=
if test "$am_cv_lib_iconv" = yes; then
LIBICONV="-liconv"
fi
AC_SUBST(LIBICONV)
KDE_CREATE_SUBDIRSLIST
AM_CONDITIONAL(keximdb_SUBDIR_included, test "x$keximdb_SUBDIR_included" = xyes)
AC_CONFIG_FILES([ Makefile ])
AC_CONFIG_FILES([ keximdb/Makefile ])
AC_CONFIG_FILES([ keximdb/src/Makefile ])
AC_CONFIG_FILES([ keximdb/src/keximdb/Makefile ])
AC_CONFIG_FILES([ keximdb/src/mdbtools/Makefile ])
AC_CONFIG_FILES([ keximdb/src/mdbtools/libmdb/Makefile ])
AC_OUTPUT
if test -z "$KEXIDB_INC" -o -z "$KEXIDB_LIB"; then
if test -z "$KEXIDB_INC"; then
echo " + The KexiDB headers were not found"
fi
if test -z "$KEXIDB_LIB"; then
echo " + The KexiDB libraries were not found"
fi
echo " Required KexiDB development files were not found."
echo " If these are installed, you can use the --with-kexidb-includes"
echo " and --with-kexidb-libraries configure options."
echo " If not, these may be available as a package for your"
echo " distribution, or you can install them by installing Kexi"
echo " from source"
all_tests=bad
else
echo "KexiDB includes: $KEXIDB_INC"
echo "KexiDB libraries: $KEXIDB_LIB"
fi
# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
# And if so, warn when they don't match
if test "$kde_libs_prefix" != "$given_prefix"; then
# And if kde doesn't know about the prefix yet
echo ":"`tde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
if test $? -ne 0; then
echo ""
echo "Warning: you chose to install this package in $given_prefix,"
echo "but KDE was found in $kde_libs_prefix."
echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix"
echo "Then restart KDE."
echo ""
fi
fi
fi
if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
echo ""
echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
echo "was not included. Therefore, GCC symbol visibility support remains disabled."
echo ""
echo "For better performance, consider including the Qt visibility supporting patch"
echo "located at:"
echo ""
echo "http://bugs.kde.org/show_bug.cgi?id=109386"
echo ""
echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
echo "everything will continue to work just fine without it."
echo ""
fi
if test "$all_tests" = "bad"; then
if test ! "$cache_file" = "/dev/null"; then
echo ""
echo "Please remove the file $cache_file after changing your setup"
echo "so that configure will find the changes next time."
echo ""
fi
else
echo ""
echo "Good - your configure finished. Start make now"
echo ""
fi