Drop automake build support.

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

.gitmodules

@@ -1,3 +0,0 @@
-[submodule "admin"]
-	path = admin
-	url = https://system@scm.trinitydesktop.org/scm/git/tde-common-admin

CMakeLists.txt

@@ -19,7 +19,7 @@ project( kgtk )
 
 ##### set up cpack ##############################
 
-set(CPACK_PACKAGE_DESCRIPTION_FILE "${CMAKE_CURRENT_SOURCE_DIR}/README")
+set(CPACK_PACKAGE_DESCRIPTION_FILE "${CMAKE_CURRENT_SOURCE_DIR}/README.md")
 set(CPACK_GENERATOR "TBZ2")
 set(CPACK_SOURCE_GENERATOR "TBZ2")
 set(CPACK_PACKAGE_VERSION_MAJOR "0")

INSTALL

@@ -0,0 +1,17 @@
+Basic Installation
+==================
+
+kgtk-qt3 relies on cmake to build.
+
+Here are suggested default options:
+
+ -DCMAKE_EXPORT_COMPILE_COMMANDS="ON" \
+ -DCMAKE_INSTALL_PREFIX="/opt/trinity" \
+ -DCONFIG_INSTALL_DIR="/etc/trinity" \
+ -DSYSCONF_INSTALL_DIR="/etc/trinity" \
+ -DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
+ -DCMAKE_BUILD_TYPE=RelWithDebInfo \
+ -DCMAKE_VERBOSE_MAKEFILE="ON" \
+ -DCMAKE_SKIP_RPATH="OFF" \
+ -DBUILD_ALL="ON" \
+ -DWITH_ALL_OPTIONS="ON"

README

@@ -1,124 +0,0 @@
-Introduction
-------------
-
-KGtk is a quick-n-dirty hack to allow some Gtk2, Qt3, and Qt4
-applications to use KDE3 or KDE4 file dialogs.
-
-KGtk is composed of the following pieces:
-
-1. An application called kdialogd. In this archive there are
-   two varieties of this - a KDE3 version, and a KDE4 version.
-2. LD_PRELOAD libraries that are used to override the Gtk2, Qt3,
-   and Qt4 file dialogs.
-
-If you start an application using the following command:
-    kgtk-wrapper gimp
-
-...the the following occurs:
-
-1. kgtk-wrapper determines whether the application is a Gtk2, Qt3,
-   or Qt4 application. It then sets the LD_PRELOAD environment
-   variable to point to the approriate KGtk library.
-2. When the application now starts, it checks for the
-   TDE_SESSION_VERSION environment variable. If this is not set,
-   or is less than 4, then the KDE3 version of kdialogd is started,
-   else the KDE4 version is started.
-3. When 'gimp' now tries to open a file dialog, the KGtk library
-   intercepts this, and asks kdialogd to open a file dialog instead.
-
-There will only ever be one instance of kdialogd, and all apps communicate with the same
-instance - and it termiantes itself 30 seconds after the last Gtk/Qt app has
-disconnected. This timeout can be changed by editing kdialogdrc and setting/changing
-
-    [General]
-    Timeout=10
-
-
-Installation
-------------
-As of v0.9.1, kgtk uses CMake in place of autotools.
-
-Because KGtk includes code for Qt3/KDE3 and Qt4/KDE4, you need
-to specify when building which variants you would like to build.
-This is accomplished as follows:
-
-1. mkdir build
-2. cd build
-3. cmake .. -DCMAKE_INSTALL_PREFIX=/usr
-4. make
-5. sudo make install
-
-* -DKGTK_KDE3=true instructs CMake to create makefiles for the KDE3
-  version of KDialogD. Defaults to "true", use -DKGTK_KDE3=false
-  to turn off. Turning this on, sets -DKGTK_KDE4=false and
-  -DKGTK_QT4=false
-
-* -DKGTK_KDE4=true would instruct CMake to create makefiles for
-  the KDE4 version of KDialogD. Defaults to "false".
-
-* -DKGTK_GTK2=true instructs CMake to create makefiles for the Gtk2
-  version of the LD_PRELOAD library. Defaults to "true", use
-  -DKGTK_GTK2=false to turn off.
-
-* -DKGTK_QT3=true instructs CMake to create makefiles for the Qt3
-  version of the LD_PRELOAD library. Defaults to "true", use
-  -DKGTK_QT3=false to turn off. Turning this on, sets
-  -DKGTK_KDE4=false and -DKGTK_QT4=false
-
-* -DKGTK_QT4=true instructs CMake to create makefiles for the Qt4
-  version of the LD_PRELOAD library. Defaults to "false".
-
-* For 64 bit systems, also append -DLIB_SUFFIX=64
-
-Mixing '-DKGTK_KDE3=true' and '-DKGTK_KDE4=true' wont work, so compile the Qt3/KDE3,
-and Qt4/KDE4 variants separately. Also, the 'build' folder *must* be cleaned before
-switching to/from Qt3/KDE3 from/to Qt4/KDE4
-
-
-So, to compile everything I suggest the following:
-
- 1. mkdir build3
- 2. cd build3
- 3. cmake .. -DCMAKE_INSTALL_PREFIX=/usr
-    [ This will build KDialogD for KDE3, and create the LD_PRELOAD libraries for
-      Qt3 and Gtk2 ]
- 4. make
- 5. sudo make install
-
- 6. set up Qt4/KDE4 env variables
- 7. clean build folder
-
- 8. mkdir build4
- 9. cd build4
-10. cmake .. -DCMAKE_INSTALL_PREFIX=/usr -DKGTK_KDE4=true -DKGTK_QT4=true -DKGTK_GTK2=false
-11. make
-12. sudo make install
-
-NOTE: If you have both KDE3 and KDE4 installed, when calling cmake for KDE3, set TDEDIR to be empty.
-      e.g. 
-        TDEDIR= cmake -DCMAKE_INSTALL_PREFIX=/usr -DKGTK_KDE4=false -DKGTK_QT4=false
-
-Notes
------
-
-The library has been tested with the following applications:
-
-Reported to work:
-
-  1. Firefox (1.5.x only, not 1.0.x)
-  2. Inkscape
-  3. GIMP
-  4. Kino
-  5. Eclipse
-  6. Azureus
-  7. Galde-2
-  8. Streamtuner
-  9. Avidemux2
- 10. Scribus
- 11. QComcBook
- 12. Planner 0.14: works, but asks twice for open file
-
-Reported *not* working:
-
-  1. AbiWord
-

README.md

@@ -0,0 +1,49 @@
+
+  ktgk-qt3 - allows to use TDE dialogs in Gtk apps
+
+This is an LD_PRELOAD hack that allows most GTK
+applications to use Trinity's file dialogs when run under TDE.
+
+It overrides the gtk file chooser functions to communicate
+with this TDE module/application.
+
+kgtk-qt3 is composed of the following pieces:
+
+1. An application called kdialogd.
+2. LD_PRELOAD libraries that are used to override the Gtk2 and TQt3 file dialogs.
+
+Start an application using the following command to use the functionality:
+
+    kgtk-wrapper <application>
+
+kgtk-wrapper determines whether it is a Gtk2 or TQt3 application and then sets
+the LD_PRELOAD environment variable to point to the approriate kgtk library.
+When the application tries to open a file dialog, the kgtk library intercepts
+this and asks kdialogd to open a file dialog instead.
+There will only ever be one instance of kdialogd, and all apps communicate with the same
+instance - and it terminates itself 30 seconds after the last Gtk/TQt app has
+disconnected. This timeout can be changed by editing kdialogdrc and setting/changing
+
+    [General]
+    Timeout=10
+
+.
+
+Contributing
+--------------
+
+If you wish to contribute to kgtk-qt3, you might do so:
+
+- TDE Gitea Workspace (TGW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/gitea
+
+- TDE Weblate Translation Workspace (TWTW) collaboration tool.
+  https://mirror.git.trinitydesktop.org/weblate
+
+
+Translations status
+---------------------
+
+### messages
+[![Translations status](https://mirror.git.trinitydesktop.org/weblate/widgets/applications/-/kgtk-qt3/multi-auto.svg
+"Engage in translating")](https://mirror.git.trinitydesktop.org/weblate/projects/applications/kgtk-qt3/)

TODO

@@ -1 +0,0 @@
-KDE4: File dialog history

admin

@@ -1 +0,0 @@
-Subproject commit a7f75ac0ff587d5b8694a1b78557597161f8104c