TDE
/
kommando
mirror of https://mirror.git.trinitydesktop.org/gitea/TDE/kommando
0
0
Fork 0
Code Issues Releases Wiki Activity

Clean up automake stuff

Browse Source 
Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>
pull/1/head
Michele Calgaro 1 year ago
parent 3b8c44efa3
commit 28a5e3a6b5
Signed by: MicheleC
GPG Key ID: 2A75B7CA8ADED5CF
52 changed files with 13 additions and 79483 deletions
Show Stats Download Patch File Download Diff File

4
AUTHORS
Unescape View File

@ -1 +1,3 @@
Daniel Stöckel <the_docter@gmx.net> Ported to TDE by Michele Calgaro <michele.calgaro@yahoo.it>
Original author: Daniel Stöckel <the_docter@gmx.net>

183
INSTALL
Unescape View File

@ -1,178 +1,15 @@
Install with:
./configure && make
su -c "make install"
If you are upgrading from version 0.1.x then please be aware that the config files are not fully compatible. It is recommended to save the old file and let Kommando create the default configuration. Then replace the <menu></menu> section with the content of your saved configuration.
If you are upgrading from version 0.3.0 or below and want to keep your configfile, then you have to move ~/.kommandorc to ~/.kde/share/apps/kommando, which is the proper place for kde programs to put their config files to.
Please read the README file too, if you are new to Kommando!
Basic Installation Basic Installation
================== ==================
These are generic installation instructions. Kommando relies on cmake to build.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If at some point `config.cache'
contains results you don't want to keep, you may remove or edit it.
The file `configure.in' is used to create `configure' by a program
called `autoconf'. You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
Running `configure' takes a while. While running, it prints some
messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Type `make install' to install the programs and any data files and
documentation.
4. You can remove the program binaries and object files from the
source code directory by typing `make clean'.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. You can give `configure'
initial values for variables by setting them in the environment. Using
a Bourne-compatible shell, you can do that on the command line like
this:
CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
Or on systems that have the `env' program, you can do it like this:
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory. After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
architecture.
Installation Names
==================
By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc. You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on. Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
CPU-COMPANY-SYSTEM
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.
If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Operation Controls
==================
`configure' recognizes the following options to control how it
operates.
`--cache-file=FILE'
Use and save the results of the tests in FILE instead of
`./config.cache'. Set FILE to `/dev/null' to disable caching, for
debugging `configure'.
`--help'
Print a summary of the options to `configure', and exit.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made.
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--version'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`configure' also accepts some other, not widely useful, options. Here are suggested default options:
-DCMAKE_INSTALL_PREFIX="/opt/trinity" \
-DCONFIG_INSTALL_DIR="/etc/trinity" \
-DSYSCONF_INSTALL_DIR="/etc" \
-DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
-DCMAKE_BUILD_TYPE=RelWithDebInfo \
-DCMAKE_VERBOSE_MAKEFILE="ON" \
-DCMAKE_SKIP_RPATH="OFF" \
-DBUILD_ALL="ON"

22
Makefile.am
Unescape View File

@ -1,22 +0,0 @@
SUBDIRS = $(TOPSUBDIRS)
$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
$(top_srcdir)/subdirs:
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
package-messages:
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common package-messages
$(MAKE) -C po merge
EXTRA_DIST = admin COPYING configure.in.in
dist-hook:
cd $(top_distdir) && perl admin/am_edit -padmin
cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs

10
Makefile.cvs
Unescape View File

@ -1,10 +0,0 @@
all:
@echo "This Makefile is only for the CVS repository"
@echo "This will be deleted before making the distribution"
@echo ""
$(MAKE) -f admin/Makefile.common cvs
dist:
$(MAKE) -f admin/Makefile.common dist
.SILENT:

892
Makefile.in
Unescape View File

@ -1,892 +0,0 @@
# Makefile.in generated by automake 1.9.6 from Makefile.am.
# KDE tags expanded automatically by am_edit - $Revision: 1.416 $
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
admin/compile admin/config.guess admin/config.sub \
admin/depcomp admin/install-sh admin/ltmain.sh admin/missing \
admin/mkinstalldirs admin/ylwrap
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
#>- html-recursive info-recursive install-data-recursive \
#>- install-exec-recursive install-info-recursive \
#>- install-recursive installcheck-recursive installdirs-recursive \
#>- pdf-recursive ps-recursive uninstall-info-recursive \
#>- uninstall-recursive
#>+ 6
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-exec-recursive install-info-recursive \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive nmcheck-recursive bcheck-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
#>+ 1
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARTSCCONFIG = @ARTSCCONFIG@
AUTOCONF = @AUTOCONF@
AUTODIRS = @AUTODIRS@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CONF_FILES = @CONF_FILES@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DCOPIDL = @DCOPIDL@
DCOPIDL2CPP = @DCOPIDL2CPP@
DCOPIDLNG = @DCOPIDLNG@
DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@
EXEEXT = @EXEEXT@
F77 = @F77@
FFLAGS = @FFLAGS@
FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@
GMSGFMT = @GMSGFMT@
HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@
KCONFIG_COMPILER = @KCONFIG_COMPILER@
KDECONFIG = @KDECONFIG@
KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
KDE_INCLUDES = @KDE_INCLUDES@
KDE_LDFLAGS = @KDE_LDFLAGS@
KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@
KDE_MT_LIBS = @KDE_MT_LIBS@
KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@
KDE_PLUGIN = @KDE_PLUGIN@
KDE_RPATH = @KDE_RPATH@
KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@
KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@
KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@
LDFLAGS = @LDFLAGS@
LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@
LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@
LIBCOMPAT = @LIBCOMPAT@
LIBCRYPT = @LIBCRYPT@
LIBDL = @LIBDL@
LIBJPEG = @LIBJPEG@
LIBOBJS = @LIBOBJS@
LIBPNG = @LIBPNG@
LIBPTHREAD = @LIBPTHREAD@
LIBRESOLV = @LIBRESOLV@
LIBS = @LIBS@
LIBSM = @LIBSM@
LIBSOCKET = @LIBSOCKET@
LIBTOOL = @LIBTOOL@
LIBUCB = @LIBUCB@
LIBUTIL = @LIBUTIL@
LIBZ = @LIBZ@
LIB_KAB = @LIB_KAB@
LIB_KABC = @LIB_KABC@
LIB_TDECORE = @LIB_TDECORE@
LIB_TDEPIM = @LIB_TDEPIM@
LIB_TDEPRINT = @LIB_TDEPRINT@
LIB_TDEUI = @LIB_TDEUI@
LIB_TDEDNSSD = @LIB_TDEDNSSD@
LIB_KFILE = @LIB_KFILE@
LIB_KFM = @LIB_KFM@
LIB_TDEHTML = @LIB_TDEHTML@
LIB_TDEIMPROXY = @LIB_TDEIMPROXY@
LIB_TDEIO = @LIB_TDEIO@
LIB_KJS = @LIB_KJS@
LIB_KNEWSTUFF = @LIB_KNEWSTUFF@
LIB_TDEPARTS = @LIB_TDEPARTS@
LIB_TDESPELL = @LIB_TDESPELL@
LIB_TDESYCOCA = @LIB_TDESYCOCA@
LIB_TDEUTILS = @LIB_TDEUTILS@
LIB_POLL = @LIB_POLL@
LIB_QPE = @LIB_QPE@
LIB_QT = @LIB_QT@
LIB_SMB = @LIB_SMB@
LIB_X11 = @LIB_X11@
LIB_XEXT = @LIB_XEXT@
LIB_XRENDER = @LIB_XRENDER@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKETDEWIDGETS = @MAKETDEWIDGETS@
MCOPIDL = @MCOPIDL@
MEINPROC = @MEINPROC@
MOC = @MOC@
MSGFMT = @MSGFMT@
NOOPT_CFLAGS = @NOOPT_CFLAGS@
NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
QTE_NORTTI = @QTE_NORTTI@
QT_INCLUDES = @QT_INCLUDES@
QT_LDFLAGS = @QT_LDFLAGS@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TOPSUBDIRS = @TOPSUBDIRS@
UIC = @UIC@
UIC_TR = @UIC_TR@
USER_INCLUDES = @USER_INCLUDES@
USER_LDFLAGS = @USER_LDFLAGS@
USE_EXCEPTIONS = @USE_EXCEPTIONS@
USE_RTTI = @USE_RTTI@
USE_THREADS = @USE_THREADS@
VERSION = @VERSION@
WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@
XGETTEXT = @XGETTEXT@
XMLLINT = @XMLLINT@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_INCLUDES = @X_INCLUDES@
X_LDFLAGS = @X_LDFLAGS@
X_PRE_LIBS = @X_PRE_LIBS@
X_RPATH = @X_RPATH@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
all_includes = @all_includes@
all_libraries = @all_libraries@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
include_ARTS_FALSE = @include_ARTS_FALSE@
include_ARTS_TRUE = @include_ARTS_TRUE@
include_x11_FALSE = @include_x11_FALSE@
include_x11_TRUE = @include_x11_TRUE@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
kde_appsdir = @kde_appsdir@
kde_bindir = @kde_bindir@
kde_confdir = @kde_confdir@
kde_datadir = @kde_datadir@
kde_htmldir = @kde_htmldir@
kde_icondir = @kde_icondir@
kde_includes = @kde_includes@
kde_kcfgdir = @kde_kcfgdir@
kde_libraries = @kde_libraries@
kde_libs_htmldir = @kde_libs_htmldir@
kde_libs_prefix = @kde_libs_prefix@
kde_locale = @kde_locale@
kde_mimedir = @kde_mimedir@
kde_moduledir = @kde_moduledir@
kde_qtver = @kde_qtver@
kde_servicesdir = @kde_servicesdir@
kde_servicetypesdir = @kde_servicetypesdir@
kde_sounddir = @kde_sounddir@
kde_styledir = @kde_styledir@
kde_templatesdir = @kde_templatesdir@
kde_wallpaperdir = @kde_wallpaperdir@
kde_widgetdir = @kde_widgetdir@
tdeinitdir = @tdeinitdir@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
qt_includes = @qt_includes@
qt_libraries = @qt_libraries@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
unsermake_enable_pch_FALSE = @unsermake_enable_pch_FALSE@
unsermake_enable_pch_TRUE = @unsermake_enable_pch_TRUE@
x_includes = @x_includes@
x_libraries = @x_libraries@
xdg_appsdir = @xdg_appsdir@
xdg_directorydir = @xdg_directorydir@
xdg_menudir = @xdg_menudir@
SUBDIRS = $(TOPSUBDIRS)
MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
EXTRA_DIST = admin COPYING configure.in.in
#>- all: config.h
#>+ 1
all: docs-am config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh:
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
#>- @for dep in $?; do \
#>- case '$(am__configure_deps)' in \
#>- *$$dep*) \
#>- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
#>- cd $(srcdir) && $(AUTOMAKE) --gnu \
#>- && exit 0; \
#>- exit 1;; \
#>- esac; \
#>- done; \
#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
#>- cd $(top_srcdir) && \
#>- $(AUTOMAKE) --gnu Makefile
#>+ 14
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
( \
cd $(srcdir) && $(AUTOMAKE) --gnu \
) || exit 1; echo ' cd $(top_srcdir) && perl admin/am_edit '; cd $(top_srcdir) && perl admin/am_edit && exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
cd $(top_srcdir) && perl admin/am_edit Makefile.in
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
#>- cd $(srcdir) && $(AUTOCONF)
#>+ 2
cd $(srcdir) && rm -f configure
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(am__configure_deps)
cd $(top_srcdir) && $(AUTOHEADER)
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
$(mkdir_p) $(distdir)/admin
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(mkdir_p) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& cd $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile config.h
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
#>- clean: clean-recursive
#>+ 1
clean: kde-rpo-clean clean-recursive
#>- clean-am: clean-generic clean-libtool mostlyclean-am
#>+ 1
clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
info: info-recursive
info-am:
install-data-am:
install-exec-am:
install-info: install-info-recursive
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-info-am
uninstall-info: uninstall-info-recursive
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
check-am clean clean-generic clean-libtool clean-recursive \
ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \
distclean-generic distclean-hdr distclean-libtool \
distclean-recursive distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-exec \
install-exec-am install-info install-info-am install-man \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
maintainer-clean-recursive mostlyclean mostlyclean-generic \
mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
tags tags-recursive uninstall uninstall-am uninstall-info-am
$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
$(top_srcdir)/subdirs:
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
package-messages:
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common package-messages
$(MAKE) -C po merge
dist-hook:
cd $(top_distdir) && perl admin/am_edit -padmin
cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
clean-bcheck:
rm -f *.bchecktest.cc *.bchecktest.cc.class a.out
bcheck: bcheck-recursive
bcheck-am:
@for i in ; do \
if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
echo "$$i"; \
if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \
rm -f $$i.bchecktest.cc; exit 1; \
fi ; \
echo "" >> $$i.bchecktest.cc.class; \
perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
rm -f a.out; \
fi ; \
done
#>+ 2
KDE_DIST=stamp-h.in subdirs Makefile.in configure.files config.h.in configure.in Makefile.cvs aclocal.m4 acinclude.m4 configure Makefile.am
#>+ 2
docs-am:
#>+ 7
force-reedit:
\
cd $(srcdir) && $(AUTOMAKE) --gnu \
cd $(top_srcdir) && perl admin/am_edit Makefile.in
#>+ 21
clean-bcheck:
rm -f *.bchecktest.cc *.bchecktest.cc.class a.out
bcheck: bcheck-recursive
bcheck-am:
@for i in ; do \
if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
echo "$$i"; \
if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \
rm -f $$i.bchecktest.cc; exit 1; \
fi ; \
echo "" >> $$i.bchecktest.cc.class; \
perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
rm -f a.out; \
fi ; \
done
#>+ 3
final:
$(MAKE) all-am
#>+ 3
final-install:
$(MAKE) install-am
#>+ 3
no-final:
$(MAKE) all-am
#>+ 3
no-final-install:
$(MAKE) install-am
#>+ 3
cvs-clean:
$(MAKE) admindir=$(top_srcdir)/admin -f $(top_srcdir)/admin/Makefile.common cvs-clean
#>+ 3
kde-rpo-clean:
-rm -f *.rpo
#>+ 3
nmcheck:
nmcheck-am: nmcheck

0
NEWS
Unescape View File

11598
acinclude.m4
View File

File diff suppressed because it is too large Load Diff

863
aclocal.m4 vendored
Unescape View File

@ -1,863 +0,0 @@
# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION so it can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.9.6])])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory. The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run. This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
# fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
# fails if $ac_aux_dir is absolute,
# fails when called from a subdirectory in a VPATH build with
# a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir. In an in-source build this is usually
# harmless because $srcdir is `.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
# MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH. The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.
AC_DEFUN([AM_AUX_DIR_EXPAND],
[dnl Rely on autoconf to set up CDPATH properly.
AC_PREREQ([2.50])dnl
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
])
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 7
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ(2.52)dnl
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])
AC_SUBST([$1_FALSE])
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 8
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery. Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "GCJ", or "OBJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
[$1], CXX, [depcc="$CXX" am_compiler_list=],
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
AC_CACHE_CHECK([dependency style of $depcc],
[am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named `D' -- because `-MD' means `put the output
# in D'.
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_$1_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
# Solaris 8's {/usr,}/bin/sh.
touch sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
case $depmode in
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
none) break ;;
esac
# We check with `-c' and `-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle `-M -o', and we need to detect this.
if depmode=$depmode \
source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_$1_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])
# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])
# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE(dependency-tracking,
[ --disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors])
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
#serial 3
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[for mf in $CONFIG_FILES; do
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# We used to match only the files named `Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
# So let's grep whole file.
if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
dirpart=`AS_DIRNAME("$mf")`
else
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
# from the Makefile without running `make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
test -z "am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n 's/^U = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`AS_DIRNAME(["$file"])`
AS_MKDIR_P([$dirpart/$fdir])
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
# is enabled. FIXME. This creates each `.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 8
# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 12
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out. PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition. After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_PREREQ([2.58])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
# test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" &&
test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
# test whether we have cygpath
if test -z "$CYGPATH_W"; then
if (cygpath --version) >/dev/null 2>/dev/null; then
CYGPATH_W='cygpath -w'
else
CYGPATH_W=echo
fi
fi
AC_SUBST([CYGPATH_W])
# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
AM_PROG_INSTALL_SH
AM_PROG_INSTALL_STRIP
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
[_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
[_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
[_AM_DEPENDENCIES(CC)],
[define([AC_PROG_CC],
defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
[_AM_DEPENDENCIES(CXX)],
[define([AC_PROG_CXX],
defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
])
])
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
# loop where config.status creates the headers, so we can generate
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$1 | $1:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
install_sh=${install_sh-"$am_aux_dir/install-sh"}
AC_SUBST(install_sh)])
# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 2
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
[rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
am__leading_dot=.
else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
# Check to see how 'make' treats includes. -*- Autoconf -*-
# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 3
# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
@echo done
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# We grep out `Entering directory' and `Leaving directory'
# messages which can occur if `w' ends up in MAKEFLAGS.
# In particular we don't look at `^make:' because GNU make might
# be invoked under some other name (usually "gmake"), in which
# case it prints its new name instead of `make'.
if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
am__include=include
am__quote=
_am_result=GNU
fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
am__include=.include
am__quote="\""
_am_result=BSD
fi
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
AC_MSG_RESULT([$_am_result])
rm -f confinc confmf
])
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 4
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])
# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it supports --run.
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
else
am_missing_run=
AC_MSG_WARN([`missing' script is too old or missing])
fi
])
# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_MKDIR_P
# ---------------
# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
#
# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
# created by `make install' are always world readable, even if the
# installer happens to have an overly restrictive umask (e.g. 077).
# This was a mistake. There are at least two reasons why we must not
# use `-m 0755':
# - it causes special bits like SGID to be ignored,
# - it may be too restrictive (some setups expect 775 directories).
#
# Do not use -m 0755 and let people choose whatever they expect by
# setting umask.
#
# We cannot accept any implementation of `mkdir' that recognizes `-p'.
# Some implementations (such as Solaris 8's) are not thread-safe: if a
# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
# concurrently, both version can detect that a/ is missing, but only
# one can create it and the other will error out. Consequently we
# restrict ourselves to GNU make (using the --version option ensures
# this.)
AC_DEFUN([AM_PROG_MKDIR_P],
[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
# We used to keeping the `.' as first argument, in order to
# allow $(mkdir_p) to be used without argument. As in
# $(mkdir_p) $(somedir)
# where $(somedir) is conditionally defined. However this is wrong
# for two reasons:
# 1. if the package is installed by a user who cannot write `.'
# make install will fail,
# 2. the above comment should most certainly read
# $(mkdir_p) $(DESTDIR)$(somedir)
# so it does not work when $(somedir) is undefined and
# $(DESTDIR) is not.
# To support the latter case, we have to write
# test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
# so the `.' trick is pointless.
mkdir_p='mkdir -p --'
else
# On NextStep and OpenStep, the `mkdir' command does not
# recognize any option. It will interpret all options as
# directories to create, and then abort because `.' already
# exists.
for d in ./-p ./--version;
do
test -d $d && rmdir $d
done
# $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
if test -f "$ac_aux_dir/mkinstalldirs"; then
mkdir_p='$(mkinstalldirs)'
else
mkdir_p='$(install_sh) -d'
fi
fi
AC_SUBST([mkdir_p])])
# Helper functions for option handling. -*- Autoconf -*-
# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 3
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
# _AM_SET_OPTION(NAME)
# ------------------------------
# Set option NAME. Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
# _AM_SET_OPTIONS(OPTIONS)
# ----------------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
# Check to make sure that the build environment is sane. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 4
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftest.file`
fi
rm -f conftest.file
if test "$[*]" != "X $srcdir/configure conftest.file" \
&& test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
test "$[2]" = conftest.file
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT(yes)])
# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor `install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in `make install-strip', and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'. However `strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the `STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 2
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of `v7', `ustar', or `pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
# tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility.
AM_MISSING_PROG([AMTAR], [tar])
m4_if([$1], [v7],
[am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
[m4_case([$1], [ustar],, [pax],,
[m4_fatal([Unknown tar format])])
AC_MSG_CHECKING([how to create a $1 tar archive])
# Loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
_am_tools=${am_cv_prog_tar_$1-$_am_tools}
# Do not fold the above two line into one, because Tru64 sh and
# Solaris sh will not grok spaces in the rhs of `-'.
for _am_tool in $_am_tools
do
case $_am_tool in
gnutar)
for _am_tar in tar gnutar gtar;
do
AM_RUN_LOG([$_am_tar --version]) && break
done
am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
am__untar="$_am_tar -xf -"
;;
plaintar)
# Must skip GNU tar: if it does not support --format= it doesn't create
# ustar tarball either.
(tar --version) >/dev/null 2>&1 && continue
am__tar='tar chf - "$$tardir"'
am__tar_='tar chf - "$tardir"'
am__untar='tar xf -'
;;
pax)
am__tar='pax -L -x $1 -w "$$tardir"'
am__tar_='pax -L -x $1 -w "$tardir"'
am__untar='pax -r'
;;
cpio)
am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
am__untar='cpio -i -H $1 -d'
;;
none)
am__tar=false
am__tar_=false
am__untar=false
;;
esac
# If the value was cached, stop now. We just wanted to have am__tar
# and am__untar set.
test -n "${am_cv_prog_tar_$1}" && break
# tar/untar a dummy directory, and stop if the command works
rm -rf conftest.dir
mkdir conftest.dir
echo GrepMe > conftest.dir/file
AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
rm -rf conftest.dir
if test -s conftest.tar; then
AM_RUN_LOG([$am__untar <conftest.tar])
grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
fi
done
rm -rf conftest.dir
AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
AC_MSG_RESULT([$am_cv_prog_tar_$1])])
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
m4_include([acinclude.m4])

183
admin/Doxyfile.am
Unescape View File

@ -1,183 +0,0 @@
## generate API documentation with doxygen
apidox-am-yes:
@if test "$(subdir)" != "."; then \
$(mkinstalldirs) $(top_builddir)/apidocs/$(subdir) ;\
if test ! -x $(top_builddir)/apidocs/common; then \
if test -d $(top_srcdir)/doc/common; then \
common_dir=`cd $(top_srcdir)/doc/common && pwd` ;\
else \
common_dir=$(kde_libs_htmldir)/en/common ;\
fi ;\
$(LN_S) $$common_dir $(top_builddir)/apidocs/common; \
fi ;\
cp $(top_srcdir)/admin/Doxyfile.global Doxyfile; \
echo "PROJECT_NAME = \"$(subdir) Library\"" >> Doxyfile; \
echo "PROJECT_NUMBER = \"Version $(VERSION)\"" >> Doxyfile; \
echo "INPUT = $(srcdir)" >> Doxyfile; \
echo "IMAGE_PATH = $(top_srcdir)/doc/api" >> Doxyfile ;\
echo "OUTPUT_DIRECTORY = $(top_builddir)/apidocs" >> Doxyfile; \
echo "HTML_OUTPUT = $(subdir)/html" >> Doxyfile; \
echo "HTML_HEADER = $(top_builddir)/apidocs/common/header.html" >> Doxyfile;\
echo "HTML_FOOTER = $(top_builddir)/apidocs/common/footer.html" >> Doxyfile;\
echo "HTML_STYLESHEET = $(top_builddir)/apidocs/common/doxygen.css" >> Doxyfile;\
echo "LATEX_OUTPUT = $(subdir)/latex" >> Doxyfile; \
echo "RTF_OUTPUT = $(subdir)/rtf" >> Doxyfile; \
echo "MAN_OUTPUT = $(subdir)/man" >> Doxyfile; \
echo "GENERATE_HTML = $(GENERATE_FLAG)" >> Doxyfile ;\
echo "GENERATE_MAN = $(GENERATE_FLAG)" >> Doxyfile ;\
echo "GENERATE_LATEX = $(GENERATE_FLAG)" >> Doxyfile ;\
if test -n "$(DOXYGEN_EXCLUDE)"; then \
patterns= ;\
dirs= ;\
for item in `echo "$(DOXYGEN_EXCLUDE)"`; do \
if test -d "$(srcdir)/$$item"; then \
dirs="$$dirs $(srcdir)/$$item/" ;\
else \
patterns="$$patterns $$item" ;\
fi ;\
done ;\
echo "EXCLUDE_PATTERNS += $$patterns" >> Doxyfile; \
echo "EXCLUDE += $$dirs" >> Doxyfile ;\
fi ;\
echo "TAGFILES = \\" >> Doxyfile; \
tags='$(DOXYGEN_REFERENCES) qt'; for tag in $$tags; do \
tagpath= ;\
path="../../$$tag" ;\
if test -f $(top_builddir)/apidocs/$$tag/$$tag.tag; then \
tagpath="$(top_builddir)/apidocs/$$tag/$$tag.tag" ;\
else \
tagpath=`ls -1 $(kde_htmldir)/en/*-apidocs/$$tag/$$tag.tag 2> /dev/null` ;\
if test -n "$$tagpath"; then \
path=`echo $$tagpath | sed -e "s,.*/\([^/]*-apidocs\)/$$tag/$$tag.tag,../../../\1/$$tag,"` ;\
fi ;\
fi ;\
if test "$$tag" = qt; then \
echo $$tagpath=$(QTDOCDIR) >> Doxyfile ;\
else if test -n "$$tagpath"; then \
echo "$$tagpath=$$path/html \\" >> Doxyfile ;\
fi ;\
fi ;\
done ;\
echo "GENERATE_TAGFILE = $(top_builddir)/apidocs/$(subdir)/`basename $(subdir)`.tag" >> Doxyfile ;\
echo "IGNORE_PREFIX = K" >> Doxyfile ;\
echo "HAVE_DOT = $(KDE_HAVE_DOT)" >> Doxyfile ;\
$(DOXYGEN) Doxyfile ;\
fi
apidox-am-no:
install-data-local: install-apidox
## install API documentation
install-apidox:
@if test "$(subdir)" != "."; then \
$(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html ; \
if test -f $(top_builddir)/apidocs/$(subdir)/$(subdir).tag; then \
echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
$(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
fi; \
if test -d $(top_builddir)/apidocs/$(subdir)/html; then \
list=`ls $(top_builddir)/apidocs/$(subdir)/html`; \
echo "installing $(top_builddir)/apidocs/$(subdir)/html" ;\
for file in $$list; do \
$(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \
done; \
fi; \
symlink="$(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common"; \
if test ! -L "$symlink" -o `readlink "$symlink" 2>/dev/null` != "$(kde_libs_htmldir)/en/common"; then \
echo "Creating symlink $(kde_htmldir)/en/$(PACKAGE)-apidocs/common"; \
rm -f $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common; \
$(LN_S) $(kde_libs_htmldir)/en/common $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common; \
fi; \
else\
if test -d $(top_builddir)/apidocs; then \
$(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs ;\
list=`cd $(top_builddir)/apidocs && ls -1`; \
echo "installing $(top_builddir)/apidocs/$$file" ;\
for file in $$list; do \
if test -f $(top_builddir)/apidocs/$$file; then \
$(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
fi; \
done ; fi; \
fi
uninstall-local: uninstall-apidox
## uninstall API documentation
uninstall-apidox:
@if test "$(subdir)" != "."; then \
if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); then \
rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \
fi\
else\
if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; then \
rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \
fi\
fi
apidox:
@if test "$(subdir)" != "."; then \
$(MAKE) apidox-am-@KDE_HAS_DOXYGEN@ ;\
else \
$(MAKE) apidox-am-toplevel-@KDE_HAS_DOXYGEN@ ;\
fi
@set fnord $(MAKEFLAGS); amf=$$2; if test -n '$(SUBDIRS)'; then \
list='$(SUBDIRS)'; \
for subdir in $$list; do \
if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am; then \
echo "Making apidox in $$subdir"; \
if test "$$subdir" != "."; then \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=no apidox) || exit 1; \
fi ; fi ;\
done; \
for subdir in $$list; do \
if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am; then \
echo "Making apidox in $$subdir"; \
if test "$$subdir" != "."; then \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=yes apidox) || exit 1; \
fi ; fi ;\
done; \
fi
apidox-am-toplevel-no:
apidox-am-toplevel-yes:
@echo "*** Creating API documentation main page"; \
cp $(top_srcdir)/admin/Doxyfile.global Doxyfile; \
echo "PROJECT_NAME = \"$(DOXYGEN_PROJECT_NAME)\"" >> Doxyfile ; \
echo "PROJECT_NUMBER = \"$(DOXYGEN_PROJECT_NUMBER)\"" >> Doxyfile ; \
echo "INPUT = $(top_srcdir)" >> Doxyfile ; \
echo "OUTPUT_DIRECTORY = $(top_builddir)/apidocs" >> Doxyfile ; \
echo "FILE_PATTERNS = *.dox" >> Doxyfile ; \
echo "RECURSIVE = NO" >> Doxyfile ; \
echo "SOURCE_BROWSER = NO" >> Doxyfile ; \
echo "ALPHABETICAL_INDEX = NO" >> Doxyfile ; \
echo "HTML_OUTPUT = ." >> Doxyfile ; \
echo "HTML_HEADER = apidocs/common/mainheader.html" >> Doxyfile ; \
echo "HTML_FOOTER = apidocs/common/mainfooter.html" >> Doxyfile ; \
echo "HTML_STYLESHEET = apidocs/common/doxygen.css" >> Doxyfile ; \
echo "GENERATE_LATEX = NO" >> Doxyfile ; \
echo "GENERATE_RTF = NO" >> Doxyfile ; \
echo "GENERATE_MAN = NO" >> Doxyfile ; \
echo "GENERATE_XML = NO" >> Doxyfile ; \
echo "GENERATE_AUTOGEN_DEF = NO" >> Doxyfile ; \
echo "ENABLE_PREPROCESSING = NO" >> Doxyfile ; \
echo "CLASS_DIAGRAMS = NO" >> Doxyfile ; \
echo "HAVE_DOT = NO" >> Doxyfile ; \
echo "GENERATE_HTML = YES" >> Doxyfile ;\
$(mkinstalldirs) $(top_builddir)/apidocs ; \
rm -f $(top_builddir)/apidocs/common ; \
if test -d $(top_srcdir)/doc/common; then \
common_dir=`cd $(top_srcdir)/doc/common && pwd` ;\
else \
common_dir=$(kde_libs_htmldir)/en/common ;\
fi ;\
$(LN_S) $$common_dir $(top_builddir)/apidocs/common ;\
doxygen Doxyfile; \
rm -f Doxyfile
.PHONY: apidox-am-yes apidox-am-no install-data-local install-apidox install-apidox uninstall-local uninstall-apidox uninstall-apidox apidox apidox-am-toplevel-no apidox-am-toplevel-yes
# Local Variables:
# mode: makefile
# End:

1133
admin/Doxyfile.global
View File

File diff suppressed because it is too large Load Diff

35
admin/Makefile.common
Unescape View File

@ -1,35 +0,0 @@
### Makefile.common
###
### Copyright (C) 2002 by the KDE developers
### All the real work is done by the shellscript cvs.sh
SHELL=/bin/sh
cvs dist cvs-clean configure configure.in configure.files subdirs package-messages package-merge Makefile.am acinclude.m4 extract-messages:
@admindir=$(admindir); \
if test "x$$admindir" = x; then \
admindir=.; until test -f $$admindir/admin/cvs.sh; do \
admindir=$$admindir/..; \
if test `cd $$admindir && pwd` = / ; then break; fi; \
done; \
admindir=$$admindir/admin; \
if test -f $$admindir/cvs.sh; then :; else \
echo "Can't find the admin/ directory in any parent of the"; \
echo "current directory. Please set it with admindir=..."; \
exit 1; \
fi; \
fi; \
if test "$@" = "package-merge"; then \
MAKE="$(MAKE)" POFILES="$(POFILES)" PACKAGE="$(PACKAGE)" \
$(SHELL) $$admindir/cvs.sh package-merge ;\
else \
MAKE="$(MAKE)" $(SHELL) $$admindir/cvs.sh $@ ;\
fi
configure.in: configure.files subdirs
configure.files: subdirs
.SILENT:
.PHONY: cvs dist cvs-clean package-merge package-messages

5707
admin/acinclude.m4.in
View File

File diff suppressed because it is too large Load Diff

2448
admin/am_edit
View File

File diff suppressed because it is too large Load Diff

156
admin/bcheck.pl
Unescape View File

@ -1,156 +0,0 @@
#!/usr/bin/perl -w
use DB_File;
use Fcntl ':flock';
if (!defined($ARGV[0])) {
print "usage: requires .class dump as parameter!\n";
exit;
}
sub bailout
{
untie %bcheckdb if(defined(%bcheckdb));
if(defined(MYLOCK)) {
flock MYLOCK, LOCK_UN;
close(MYLOCK);
}
print @_;
exit 5;
}
sub ask_user
{
my ($dbkey, $dbchunk) = @_;
if (defined($ENV{"BCHECK_UPDATE"})) {
$bcheckdb{$dbkey} = $dbchunk;
return;
}
&bailout("BC problem detected") if (! -t STDIN);
print "(I)gnore / (Q)uit / (U)pdate: ";
my $key;
while(defined(read STDIN, $key, 1)) {
$key = lc($key);
print "got: >$key<\n";
return if ($key eq 'i');
&bailout("BC problem. aborted") if ($key eq 'q');
if ($key eq 'u') {
$bcheckdb{$dbkey} = $dbchunk;
return;
}
print "\n(I)gnore / (Q)uit / (U)pdate: ";
}
}
sub diff_chunk($$)
{
my ($oldl, $newl) = @_;
my @old = split /^/m, $oldl;
my @new = split /^/m, $newl;
my $haschanges = 0;
my $max = $#old > $#new ? $#old : $#new;
die "whoops. key different" if ($old[0] ne $new[0]);
if ($#old != $#new) {
warn ("Structural difference.\n");
print @old;
print "-----------------------------------------------\n";
print @new;
$haschanges = 1;
return $haschanges;
}
print $old[0];
my ($class) = ($old[0] =~ /^(?:Class |Vtable for )(\S+)/);
my $c = 1;
while ($c < $max) {
my ($o, $n) = ($old[$c], $new[$c]);
chomp $o;
chomp $n;
$c++;
next if ($o eq $n);
if(defined($class) and $n =~ /^(\d+\s+)\w+(::\S+\s*.*)$/) {
next if ($n eq "$1$class$2");
}
$haschanges = 1;
print "-$o\n+$n\n\n";
}
return $haschanges;
}
local $dblock = $ENV{"HOME"} . "/bcheck.lock";
my $dbfile = $ENV{"HOME"} . "/bcheck.db";
my $cdump = $ARGV[0];
die "file $cdump is not readable: $!" if (! -f $cdump);
# make sure the advisory lock exists
open(MYLOCK, ">$dblock");
print MYLOCK "";
flock MYLOCK, LOCK_EX;
tie %bcheckdb, 'DB_File', $dbfile;
my $chunk = "";
open (IN, "<$cdump") or die "cannot open $cdump: $!";
while (<IN>) {
chop;
s/0x[0-9a-fA-F]+/0x......../g;
s/base size=/size=/g;
s/base align=/align=/g;
$chunk .= $_ . "\n";
if(/^\s*$/) {
my @lines = split /^/m, $chunk;
my $key = $lines[0];
chomp $key;
if($key !~ /<anonymous struct>/ &&
$key !~ /<anonymous union>/) {
if(defined($bcheckdb{$key})) {
my $dbversion = $bcheckdb{$key};
if($dbversion ne $chunk) {
&ask_user($key, $chunk) if(&diff_chunk($dbversion, $chunk));
}
}
else {
$bcheckdb{$key} = $chunk;
print "NEW: $key\n";
}
}
$chunk = "";
next;
}
}
close(IN);
untie %bcheckdb;
flock MYLOCK, LOCK_UN;
close(MYLOCK);
exit 0;

99
admin/compile
Unescape View File

@ -1,99 +0,0 @@
#! /bin/sh
# Wrapper for compilers which do not understand `-c -o'.
# Copyright 1999, 2000 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Usage:
# compile PROGRAM [ARGS]...
# `-o FOO.o' is removed from the args passed to the actual compile.
prog=$1
shift
ofile=
cfile=
args=
while test $# -gt 0; do
case "$1" in
-o)
# configure might choose to run compile as `compile cc -o foo foo.c'.
# So we do something ugly here.
ofile=$2
shift
case "$ofile" in
*.o | *.obj)
;;
*)
args="$args -o $ofile"
ofile=
;;
esac
;;
*.c)
cfile=$1
args="$args $1"
;;
*)
args="$args $1"
;;
esac
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no `-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# `.c' file was seen then we are probably linking. That is also
# ok.
exec "$prog" $args
fi
# Name of file we expect compiler to create.
cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
# Create the lock directory.
# Note: use `[/.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d
while true; do
if mkdir $lockdir > /dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir $lockdir; exit 1" 1 2 15
# Run the compile.
"$prog" $args
status=$?
if test -f "$cofile"; then
mv "$cofile" "$ofile"
fi
rmdir $lockdir
exit $status

191
admin/conf.change.pl
Unescape View File

@ -1,191 +0,0 @@
#!/usr/bin/env perl
# this script patches a config.status file, to use our own perl script
# in the main loop
# we do it this way to circumvent hacking (and thereby including)
# autoconf function (which are GPL) into our LGPL acinclude.m4.in
# written by Michael Matz <matz@kde.org>
# adapted by Dirk Mueller <mueller@kde.org>
#
# This file is free software; you can redistribute it and/or
# modify it under the terms of the GNU Library General Public
# License as published by the Free Software Foundation; either
# version 2 of the License, or (at your option) any later version.
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Library General Public License for more details.
# You should have received a copy of the GNU Library General Public License
# along with this library; see the file COPYING.LIB. If not, write to
# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.
# we have to change two places
# 1. the splitting of the substitutions into chunks of 90 (or even 48 in
# later autoconf's
# 2. the big main loop which patches all Makefile.in's
use strict;
use File::Basename;
my $ac_aux_dir = dirname($0);
my ($flag);
my $ac_version = 0;
my $vpath_seen = 0;
$flag = 0;
while (<>) {
# usage of $flag: 0 -- we have seen nothing yet
# 1 -- we are in (1)
# 2 -- we have ended (1)
# 3 -- we are in (2)
# 4 -- we ended (2)
if ($flag == 4) {
print;
} elsif ($flag == 0) {
# 1. begins with (including): "ac_max_sed_\S+\s*=\s*[0-9]+..."
# ends with (excluding) "CONFIG_FILE=..."
# in later autoconf (2.14.1) there is no CONFIG_FILES= line,
# but instead the (2) directly follow (1)
if (/^\s*ac_max_sed_([a-z]+).*=\s*([0-9]+)/ ) {
$flag = 1;
if ($1 eq 'lines') {
# lets hope its different with 2141,
# wasn't able to verify that
if ($2 eq '48') {
$ac_version = 250;
}
else {
$ac_version = 2141;
}
} elsif ($1 eq 'cmds') {
$ac_version = 213;
}
# hmm, we don't know the autoconf version, but we try anyway
} else {
print;
}
} elsif ($flag == 1) {
if (/^\s*CONFIG_FILES=/ && ($ac_version != 250)) {
print;
$flag = 2;
} elsif (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
$flag = 3;
}
} elsif ($flag == 2) {
# 2. begins with: "for ac_file in.*CONFIG_FILES" (the next 'for' after (1))
# end with: "rm -f conftest.s\*"
# on autoconf 250, it ends with '# CONFIG_HEADER section'
#
# gg: if a post-processing commands section is found first,
# stop there and insert a new loop to honor the case/esac.
# (pattern: /^\s+#\sRun the commands associated with the file./)
if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) {
$flag = 3;
} else {
print;
}
} elsif ($flag == 3) {
if (/^\s*rm\s+-f\s+conftest/ ) {
$flag = 4;
&insert_main_loop();
} elsif (/^\s*rm\s+-f\s+.*ac_cs_root/ ) {
$flag = 4;
&insert_main_loop();
#die "hhhhhhh";
if ($ac_version != 2141) {
print STDERR "hmm, don't know autoconf version\n";
}
} elsif (/^\#\s*CONFIG_(HEADER|COMMANDS) section.*|^\s+#\s(Run) the commands associated/) {
$flag = 4;
my $commands = defined $2;
&insert_main_loop();
$commands && insert_command_loop();
if($ac_version != 250) {
print STDERR "hmm, something went wrong :-(\n";
}
} elsif (/VPATH/ ) {
$vpath_seen = 1;
}
}
}
die "wrong input (flag != 4)" unless $flag == 4;
print STDERR "hmm, don't know autoconf version\n" unless $ac_version;
sub insert_main_loop {
if ($ac_version == 250) {
&insert_main_loop_250();
}
else {
&insert_main_loop_213();
}
}
sub insert_main_loop_250 {
print <<EOF;
#echo Doing the fast build of Makefiles -- autoconf $ac_version
EOF
if ($vpath_seen) {
print <<EOF;
# VPATH subst was seen in original config.status main loop
echo '/^[ ]*VPATH[ ]*=[^:]*\$/d' >>\$tmp/subs.sed
EOF
}
print <<EOF;
rm -f \$tmp/subs.files
for ac_file in .. \$CONFIG_FILES ; do
if test "x\$ac_file" != x..; then
echo \$ac_file >> \$tmp/subs.files
fi
done
if test -f \$tmp/subs.files ; then
perl $ac_aux_dir/config.pl "\$tmp/subs.sed" "\$tmp/subs.files" "\$srcdir" "\$INSTALL"
fi
rm -f \$tmp/subs.files
fi
EOF
return;
}
sub insert_main_loop_213 {
print <<EOF;
#echo Doing the fast build of Makefiles -- autoconf $ac_version
if test "x\$ac_cs_root" = "x" ; then
ac_cs_root=conftest
fi
EOF
if ($vpath_seen) {
print <<EOF;
# VPATH subst was seen in original config.status main loop
echo '/^[ ]*VPATH[ ]*=[^:]*\$/d' >> \$ac_cs_root.subs
EOF
}
print <<EOF;
rm -f \$ac_cs_root.sacfiles
for ac_file in .. \$CONFIG_FILES ; do
if test "x\$ac_file" != x..; then
echo \$ac_file >> \$ac_cs_root.sacfiles
fi
done
if test -f \$ac_cs_root.sacfiles ; then
perl $ac_aux_dir/config.pl "\$ac_cs_root.subs" "\$ac_cs_root.sacfiles" "\$ac_given_srcdir" "\$ac_given_INSTALL"
fi
rm -f \$ac_cs_root.s*
EOF
return;
}
sub insert_command_loop {
print <<EOF;
for ac_file in .. \$CONFIG_FILES ; do
EOF
}

1449
admin/config.guess vendored
View File

File diff suppressed because it is too large Load Diff

236
admin/config.pl
Unescape View File

@ -1,236 +0,0 @@
#!/usr/bin/env perl
# a script for use by autoconf to make the Makefiles
# from the Makefile.in's
#
# the original autoconf mechanism first splits all substitutions into groups
# of ca. 90, and than invokes sed for _every_ Makefile.in and every group
# (so around 2-3 times per Makefile.in). So this takes forever, as sed
# has to recompile the regexps every time.
#
# this script does better. It changes all Makefile.ins in one process.
# in tdelibs the time for building Makefile went down from 2:59 min to 13 sec!
#
# written by Michael Matz <matz@kde.org>
# adapted by Dirk Mueller <mueller@kde.org>
# This file is free software; you can redistribute it and/or
# modify it under the terms of the GNU Library General Public
# License as published by the Free Software Foundation; either
# version 2 of the License, or (at your option) any later version.
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Library General Public License for more details.
# You should have received a copy of the GNU Library General Public License
# along with this library; see the file COPYING.LIB. If not, write to
# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.
use strict;
use File::Path;
my $ac_subs=$ARGV[0];
my $ac_sacfiles = $ARGV[1];
my $ac_given_srcdir=$ARGV[2];
my $ac_given_INSTALL=$ARGV[3];
my @comp_match;
my @comp_subs;
#print "ac_subs=$ac_subs\n";
#print "ac_sacfiles=$ac_sacfiles\n";
#print "ac_given_srcdir=$ac_given_srcdir\n";
#print "ac_given_INSTALL=$ac_given_INSTALL\n";
my $configure_input;
my ($srcdir, $top_srcdir);
my $INSTALL;
my $bad_perl = ($] < 5.005);
my $created_file_count = 0;
open(CF, "< $ac_subs") || die "can't open $ac_subs: $!";
my @subs = <CF>;
close(CF);
chomp @subs;
@comp_match=();
@comp_subs=();
if ($bad_perl) {
print "Using perl older than version 5.005\n";
foreach my $pat (@subs) {
if ( ($pat =~ m/s%([^%]*)%([^%]*)%g/ )
|| ($pat =~ m/s%([^%]*)%([^%]*)%;t/ )
|| ($pat =~ m/s,([^,]*),(.*),;t/)
|| ($pat =~ m%s/([^/]*)/([^/]*)/g% )
|| ($pat =~ m%s/([^/]*)/([^/]*)/;t% )
) {
# form : s%bla%blubb%g
# or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?)
# or s,bla,blubb,;t t (autoconf 2.52)
my $srch = $1;
my $repl = $2;
$repl =~ s/\\(.)/$1/g;
push @comp_subs, make_closure($srch, $repl);
} elsif ( ($pat =~ /%([^%]*)%d/ )
|| ($pat =~ m%/([^/]*)/d% )
) {
push @comp_subs, make_closure($1, "");
} else {
die "Uhh. Malformed pattern in $ac_subs ($pat)"
unless ( $pat =~ /^\s*$/ ); # ignore white lines
}
}
} else {
foreach my $pat (@subs) {
if ( ($pat =~ /s%([^%]*)%([^%]*)%g/ ) ||
($pat =~ /s%([^%]*)%([^%]*)%;t/ ) ||
($pat =~ /s,([^,]*),(.*),;t/) ) {
# form : s%bla%blubb%g
# or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?)
# or s,bla,blubb,;t t (autoconf 2.52)
my $srch = $1;
my $repl = $2;
push @comp_match, eval "qr/\Q$srch\E/"; # compile match pattern
$repl =~ s/\\(.)/$1/g;
push @comp_subs, $repl;
} elsif ( ($pat =~ /%([^%]*)%d/ )
|| ($pat =~ m%/([^/]*)/d% )
) {
push @comp_match, eval "qr/\Q$1\E/";
push @comp_subs, "";
} else {
die "Uhh. Malformed pattern in $ac_subs ($pat)"
unless ( $pat =~ /^\s*$/ ); # ignore white lines
}
}
}
undef @subs;
# read the list of files to be patched, form:
# ./Makefile arts/Makefile arts/examples/Makefile arts/flow/Makefile
open(CF, "< $ac_sacfiles") || die "can't open $ac_sacfiles: $!";
my @ac_files = <CF>;
close(CF);
chomp @ac_files;
my $ac_file;
foreach $ac_file (@ac_files) {
next if $ac_file =~ /\.\./;
next if $ac_file =~ /^\s*$/;
my $ac_file_in;
my ($ac_dir, $ac_dots, $ac_dir_suffix);
if ($ac_file =~ /.*:.*/ ) {
($ac_file_in = $ac_file) =~ s%[^:]*:%%;
$ac_file =~ s%:.*%%;
} else {
$ac_file_in = $ac_file.".in";
}
# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
($ac_dir = $ac_file) =~ s%/[^/][^/]*$%%;
if ( ($ac_dir ne $ac_file) && ($ac_dir ne ".")) {
# The file is in a subdirectory.
if (! -d "$ac_dir") { mkpath "$ac_dir", 0, 0777; }
($ac_dir_suffix = $ac_dir) =~ s%^./%%;
$ac_dir_suffix="/".$ac_dir_suffix;
# A "../" for each directory in $ac_dir_suffix.
($ac_dots = $ac_dir_suffix) =~ s%/[^/]*%../%g;
} else {
$ac_dir_suffix="";
$ac_dots="";
}
if ($ac_given_srcdir eq ".") {
$srcdir=".";
if ($ac_dots) {
( $top_srcdir = $ac_dots) =~ s%/$%%;
} else { $top_srcdir="."; }
} elsif ($ac_given_srcdir =~ m%^/%) {
$srcdir=$ac_given_srcdir.$ac_dir_suffix;
$top_srcdir = $ac_given_srcdir;
} else {
$srcdir = $ac_dots.$ac_given_srcdir.$ac_dir_suffix;
$top_srcdir = $ac_dots.$ac_given_srcdir;
}
if ($ac_given_INSTALL) {
if ($ac_given_INSTALL =~ m%^/% ) {
$INSTALL = $ac_given_INSTALL;
} else {
$INSTALL = $ac_dots.$ac_given_INSTALL;
}
}
print "fast creating $ac_file\n";
unlink $ac_file;
my $ac_comsub="";
my $fname=$ac_file_in;
$fname =~ s%.*/%%;
$configure_input="$ac_file. Generated from $fname by config.pl.";
my $ac_file_inputs;
($ac_file_inputs = $ac_file_in) =~ s%^%$ac_given_srcdir/%;
$ac_file_inputs =~ s%:% $ac_given_srcdir/%g;
patch_file($ac_file, $ac_file_inputs);
++$created_file_count;
}
print "config.pl: fast created $created_file_count file(s).\n";
sub patch_file {
my ($outf, $infiles) = @_;
my $filedata;
my @infiles=split(' ', $infiles);
my $i=0;
foreach my $name (@infiles) {
if (open(CF, "< $name")) {
while (<CF>) {
$filedata .= $_;
}
close(CF);
} else {
print STDERR "can't open $name: $!"."\n";
}
}
$filedata =~ s%\@configure_input\@%$configure_input%g;
$filedata =~ s%\@srcdir\@%$srcdir%g;
$filedata =~ s%\@top_srcdir\@%$top_srcdir%g;
$filedata =~ s%\@INSTALL\@%$INSTALL%g;
if ($bad_perl) {
while ($i <= $#comp_subs) {
my $ref = $comp_subs[$i];
&$ref(\$filedata);
$i++;
}
} else {
while ($i <= $#comp_match) {
$filedata =~ s/$comp_match[$i]/$comp_subs[$i]/g;
$i++;
}
}
open(CF, "> $outf") || die "can't create $outf: $!";
print CF $filedata;
close(CF);
}
sub make_closure {
my ($pat, $sub) = @_;
my $ret = eval "return sub { my \$ref=shift; \$\$ref =~ s%\Q$pat\E%\Q$sub\E%g; }";
if ($@) {
print "can't create CODE: $@\n";
}
return $ret;
}

1552
admin/config.sub vendored
View File

File diff suppressed because it is too large Load Diff

30
admin/configure.in.bot.end
Unescape View File

@ -1,30 +0,0 @@
# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
# And if so, warn when they don't match
if test "$kde_libs_prefix" != "$given_prefix"; then
# And if kde doesn't know about the prefix yet
echo ":"`tde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
if test $? -ne 0; then
echo ""
echo "Warning: you chose to install this package in $given_prefix,"
echo "but KDE was found in $kde_libs_prefix."
echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix"
echo "Then restart KDE."
echo ""
fi
fi
fi
if test "$all_tests" = "bad"; then
if test ! "$cache_file" = "/dev/null"; then
echo ""
echo "Please remove the file $cache_file after changing your setup"
echo "so that configure will find the changes next time."
echo ""
fi
else
echo ""
echo "Good - your configure finished. Start make now"
echo ""
fi

57
admin/configure.in.min
Unescape View File

@ -1,57 +0,0 @@
dnl This file is part of the KDE libraries/packages
dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
dnl This file is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Library General Public
dnl License as published by the Free Software Foundation; either
dnl version 2 of the License, or (at your option) any later version.
dnl This library is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl Library General Public License for more details.
dnl You should have received a copy of the GNU Library General Public License
dnl along with this library; see the file COPYING.LIB. If not, write to
dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
dnl Boston, MA 02111-1307, USA.
# Original Author was Kalle@kde.org
# I lifted it in some mater. (Stephan Kulow)
# I used much code from Janos Farkas
dnl Process this file with autoconf to produce a configure script.
AC_INIT(acinclude.m4) dnl a source file from your sub dir
dnl This is so we can use kde-common
AC_CONFIG_AUX_DIR(admin)
dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
unset CDPATH
dnl Checking host/target/build systems, for make, install etc.
AC_CANONICAL_SYSTEM
dnl Perform program name transformation
AC_ARG_PROGRAM
dnl Automake doc recommends to do this only here. (Janos)
AM_INIT_AUTOMAKE(@MODULENAME@, @VERSION@) dnl searches for some needed programs
KDE_SET_PREFIX
dnl generate the config header
AM_CONFIG_HEADER(config.h) dnl at the distribution this done
dnl Checks for programs.
AC_CHECK_COMPILERS
AC_ENABLE_SHARED(yes)
AC_ENABLE_STATIC(no)
KDE_PROG_LIBTOOL
dnl for NLS support. Call them in this order!
dnl WITH_NLS is for the po files
AM_KDE_WITH_NLS
dnl KDE_USE_QT
AC_PATH_KDE

87
admin/cvs-clean.pl
Unescape View File

@ -1,87 +0,0 @@
#! /usr/bin/perl
#
# This script recursively (beginning with the current directory)
# wipes out everything not registered in CVS.
#
# written by Oswald Buddenhagen <ossi@kde.org>
# inspired by the "old" cvs-clean target from Makefile.common
#
# This file is free software in terms of the BSD license. That means
# that you can do anything with it except removing this license or
# the above copyright notice. There is NO WARRANTY of any kind.
#
sub rmrf()
{
my $fn = shift;
lstat ($fn);
if (-d _) {
if (opendir (DIR, $fn)) {
for my $efn (grep (!/^\.\.?$/, readdir (DIR))) {
&rmrf ($fn."/".$efn);
}
closedir (DIR);
rmdir ($fn);
}
} else {
unlink ($fn);
}
}
sub newfiles()
{
my ($indir, $incvs) = @_;
for my $n (keys (%$incvs)) { delete $$indir{$n} }
return sort (keys (%$indir));
}
sub cvsclean()
{
my $dir = shift;
my (%dirsdir, %filesdir, %dirscvs, %filescvs);
my $dnam = $dir ? $dir : ".";
if (!opendir (DIR, $dnam)) {
print STDERR "Cannot enter \"".$dnam."\".\n";
return;
}
for my $fn (grep (!/^\.\.?$/, readdir (DIR))) {
if (-d $dir.$fn) {
$fn eq "CVS" or $dirsdir{$fn} = 1;
} else {
$filesdir{$fn} = 1;
}
}
closedir (DIR);
if (!open (FILE, "<".$dir."CVS/Entries")) {
print STDERR "No CVS information in \"".$dnam."\".\n";
return;
}
while (<FILE>) {
m%^D/([^/]+)/.*$% and $dirscvs{$1} = 1;
m%^/([^/]+)/.*$% and $filescvs{$1} = 1;
}
close (FILE);
if (open (FILE, "<".$dir."CVS/Entries.Log")) {
while (<FILE>) {
m%^A D/([^/]+)/.*$% and $dirscvs{$1} = 1;
m%^A /([^/]+)/.*$% and $filescvs{$1} = 1;
m%^R D/([^/]+)/.*$% and delete $dirscvs{$1};
m%^R /([^/]+)/.*$% and delete $filescvs{$1};
}
close (FILE);
}
for my $fn (&newfiles (\%filesdir, \%filescvs)) {
print ("F ".$dir.$fn."\n");
&rmrf ($dir.$fn);
}
for my $fn (&newfiles (\%dirsdir, \%dirscvs)) {
print ("D ".$dir.$fn."\n");
&rmrf ($dir.$fn);
}
for my $fn (sort (keys (%dirscvs))) {
&cvsclean ($dir.$fn."/");
}
}
&cvsclean ("");

662
admin/cvs.sh
Unescape View File

@ -1,662 +0,0 @@
#! /bin/sh
#
# cvs.sh
#
# This file contains support code from Makefile.common
# It defines a shell function for each known target
# and then does a case to call the correct function.
unset MAKEFLAGS
call_and_fix_autoconf()
{
$AUTOCONF || exit 1
if test -r configure.in.in ; then
perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\
\\n perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\
\\\\\\n || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\
\\n rm -f \\\$CONFIG_STATUS.bak\\nfi\
\\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/; s,^#line.*LINENO.*\$,/* \$& */, ;" configure
fi
}
strip_makefile()
{
if test ! -f $makefile_wo; then
perl -e '$in=0; while ( <> ) { $in = 1 if ($_ =~ m/^if / ); print $_ unless ($in || $_ =~ m/^include /); $in = 0 if ($_ =~ m/^endif/); }' < $makefile_am > $makefile_wo
fi
}
check_autotool_versions()
{
required_autoconf_version="2.53 or newer"
AUTOCONF_VERSION=`$AUTOCONF --version | head -n 1`
case $AUTOCONF_VERSION in
Autoconf*2.5* | autoconf*2.5* ) : ;;
"" )
echo "*** AUTOCONF NOT FOUND!."
echo "*** KDE requires autoconf $required_autoconf_version"
exit 1
;;
* )
echo "*** YOU'RE USING $AUTOCONF_VERSION."
echo "*** KDE requires autoconf $required_autoconf_version"
exit 1
;;
esac
AUTOHEADER_VERSION=`$AUTOHEADER --version | head -n 1`
case $AUTOHEADER_VERSION in
Autoconf*2.5* | autoheader*2.5* ) : ;;
"" )
echo "*** AUTOHEADER NOT FOUND!."
echo "*** KDE requires autoheader $required_autoconf_version"
exit 1
;;
* )
echo "*** YOU'RE USING $AUTOHEADER_VERSION."
echo "*** KDE requires autoheader $required_autoconf_version"
exit 1
;;
esac
unset UNSERMAKE || :
AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1`
required_automake_version="1.6.1 or newer"
case $AUTOMAKE_STRING in
automake*1.5d* | automake*1.5* | automake*1.5-* )
echo "*** YOU'RE USING $AUTOMAKE_STRING."
echo "*** KDE requires automake $required_automake_version"
exit 1
;;
automake*1.6.* | automake*1.7* | automake*1.8* | automake*1.9*) : ;;
"" )
echo "*** AUTOMAKE NOT FOUND!."
echo "*** KDE requires automake $required_automake_version"
exit 1
;;
*unsermake* ) :
echo "*** YOU'RE USING UNSERMAKE."
echo "*** GOOD LUCK!! :)"
UNSERMAKE=unsermake
;;
* )
echo "*** YOU'RE USING $AUTOMAKE_STRING."
echo "*** KDE requires automake $required_automake_version"
exit 1
;;
esac
unset required_automake_version
}
cvs()
{
check_autotool_versions
acinclude_m4
### Make new subdirs and configure.in.
### The make calls could be optimized away here,
### with a little thought.
if test -r configure.in.in; then
rm -f configure.in
echo "*** Creating list of subdirectories"
create_subdirs
if test -r Makefile.am.in; then
echo "*** Creating Makefile.am"
if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then
strip_makefile
$MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1
else
Makefile_am
fi
fi
configure_files
echo "*** Creating configure.in"
if grep '\$(top_srcdir)/configure.in:' $makefile_am >/dev/null; then
strip_makefile
$MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1
else
configure_in
fi
fi
echo "*** Creating aclocal.m4"
$ACLOCAL $ACLOCALFLAGS || exit 1
echo "*** Creating configure"
call_and_fix_autoconf
if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then
echo "*** Creating config.h template"
$AUTOHEADER || exit 1
fi
echo "*** Creating Makefile templates"
$AUTOMAKE || exit 1
if test -z "$UNSERMAKE"; then
echo "*** Postprocessing Makefile templates"
perl -w admin/am_edit || exit 1
fi
if egrep "^cvs-local:" $makefile_am >/dev/null; then \
strip_makefile
$MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1
fi
echo "*** Creating date/time stamp"
touch stamp-h.in
echo "*** Finished"
echo " Don't forget to run ./configure"
echo " If you haven't done so in a while, run ./configure --help"
}
dist()
{
check_autotool_versions
###
### First build all of the files necessary to do just "make"
###
acinclude_m4
if test -r configure.in.in; then
rm -f configure.in
create_subdirs
if test -r Makefile.am.in; then
if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then
strip_makefile
$MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1
else
Makefile_am
fi
fi
configure_files
if grep '\$(top_srcdir)/configure.in:' $makefile_am >/dev/null; then
strip_makefile
$MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1
else
configure_in
fi
fi
$ACLOCAL $ACLOCALFLAGS
if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then
echo "*** Creating config.h template"
$AUTOHEADER || exit 1
fi
$AUTOMAKE --foreign
if test -z "$UNSERMAKE"; then
echo "*** Postprocessing Makefile templates"
perl -w admin/am_edit || exit 1
fi
call_and_fix_autoconf
touch stamp-h.in
if grep "^cvs-local:" $makefile_am >/dev/null; then
strip_makefile
$MAKE -f $makefile_wo cvs-local top_srcdir=.
fi
###
### Then make messages
###
if test -d po; then
LIST=`find ./po -name "*.po"`
for i in $LIST; do
file2=`echo $i | sed -e "s#\.po#\.gmo#"`
msgfmt -o $file2 $i || touch $file2
done
fi
if grep "^cvs-dist-local:" $makefile_am >/dev/null; then
strip_makefile
$MAKE -f $makefile_wo cvs-dist-local top_srcdir=.
fi
}
subdir_dist()
{
$ACLOCAL $ACLOCALFLAGS
$AUTOHEADER
$AUTOMAKE
AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1`
case $AUTOMAKE_STRING in
*unsermake* ) :
;;
*)
perl -w ../admin/am_edit --path=../admin
esac
call_and_fix_autoconf
touch stamp-h.in
}
configure_in()
{
rm -f configure.in configure.in.new
kde_use_qt_param=
test -f configure.files || { echo "need configure.files for configure.in"; exit 1; }
list=`fgrep -v "configure.in.bot" < configure.files | fgrep -v "configure.in.mid"`
: > configure.in.new
for file in $list; do
echo "dnl =======================================================" >> configure.in.new
echo "dnl FILE: $file" >> configure.in.new
echo "dnl =======================================================" >> configure.in.new
echo "" >> configure.in.new
cat $file >> configure.in.new
done
echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new
if test -f Makefile.am.in; then
subdirs=`cat subdirs`
for dir in $subdirs; do
vdir=`echo $dir | sed -e 's,[-+.@],_,g'`
echo "AM_CONDITIONAL($vdir""_SUBDIR_included, test \"x\$$vdir""_SUBDIR_included\" = xyes)" >> configure.in.new
if test -f "$dir/configure.in"; then
echo "if test \"x\$$vdir""_SUBDIR_included\" = xyes; then " >> configure.in.new
echo " AC_CONFIG_SUBDIRS($dir)" >> configure.in.new
echo "fi" >> configure.in.new
fi
done
fi
echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new
if test -f inst-apps; then
topleveldirs=`cat inst-apps`
else
topleveldirs=
for dir in `ls -1d * | sort`; do
if test "$dir" != "debian" && test -d $dir; then
topleveldirs="$topleveldirs $dir"
fi
done
fi
for topleveldir in $topleveldirs; do
if test -f $topleveldir/configure.in; then
continue
fi
if test -f $topleveldir/Makefile.am; then :; else
continue
fi
mfs=`find $topleveldir -follow -name Makefile.am -print | fgrep -v "/." | \
sed -e 's#\./##; s#/Makefile.am$##' | sort | sed -e 's#$#/Makefile#'`
for i in $mfs; do
echo "AC_CONFIG_FILES([ $i ])" >> configure.in.new
done
done
files=`cat configure.files`
list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"`
for file in $list; do
echo "AC_CONFIG_FILES([ $file ])" >> configure.in.new
done
midfiles=`cat configure.files | fgrep "configure.in.mid"`
test -n "$midfiles" && cat $midfiles >> configure.in.new
echo "AC_OUTPUT" >> configure.in.new
modulename=
if test -f configure.in.in; then
if head -n 2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then
kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"`
fi
if head -n 2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then
line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in`
if test -n "$line"; then
modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"`
VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"`
fi
sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \
configure.in.new > configure.in && mv configure.in configure.in.new
fi
fi
if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then
VERSION="\"3.4.0\""
fi
if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then
modulename=`pwd`;
modulename=`basename $modulename`
esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"`
modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"`
fi
if test -n "$kde_use_qt_param"; then
sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \
configure.in.new > configure.in && mv configure.in configure.in.new
fi
sed -e "s#@MODULENAME@#$modulename#" configure.in.new |
sed -e "s#@VERSION@#$VERSION#" > configure.in
botfiles=`cat configure.files | egrep "configure.in.bot"`
test -n "$botfiles" && cat $botfiles >> configure.in
cat $admindir/configure.in.bot.end >> configure.in
rm -f configure.in.new
}
configure_files()
{
echo "*** Creating configure.files"
admindir=NO
for i in . .. ../.. ../../..; do
if test -x $i/admin; then admindir=$i/admin; break; fi
done
rm -f configure.files
touch configure.files
if test -f configure.in.in && head -n 2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then
echo $admindir/configure.in.min >> configure.files
fi
test -f configure.in.in && echo configure.in.in >> configure.files
# we collect files in the subdirs and do some sorting tricks, so subsubdirs come after subdirs
if test -f inst-apps; then
inst=`cat inst-apps`
list=""
for i in $inst; do
list="$list `find $i/ -follow -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \
sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`"
done
else
list=`find . -follow -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \
sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`
fi
for i in $list; do if test -f $i && test `dirname $i` != "." ; then
echo $i >> configure.files
fi; done
test -f configure.in.mid && echo configure.in.mid >> configure.files
test -f configure.in.bot && echo configure.in.bot >> configure.files
if test ! -s configure.files; then
echo "There are no files to build a configure. Please check your checkout."
exit 1
fi
}
create_subdirs()
{
if grep '\$(top_srcdir)/subdirs:' $makefile_am >/dev/null; then
# as many modules contain rules to create subdirs without any
# dependencies make won't create it unless there is no file.
# so we check if that's a dummy rule or one that works
rm -f subdirs.cvs.sh.$$
if test -f subdirs; then
mv subdirs subdirs.cvs.sh.$$
fi
strip_makefile
$MAKE -f $makefile_wo top_srcdir=. ./subdirs || exit 1
if test -f subdirs.cvs.sh.$$; then
if test -s subdirs; then
rm subdirs.cvs.sh.$$
else
mv subdirs.cvs.sh.$$ subdirs
fi
fi
else
subdirs
fi
}
subdirs()
{
dirs=
idirs=
if test -f inst-apps; then
idirs=`cat inst-apps`
else
idirs=`ls -1 | sort`
fi
compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1`
compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1`
for i in $idirs; do
if test -f $i/Makefile.am; then
case " $compilefirst $compilelast " in
*" $i "*) ;;
*) dirs="$dirs $i"
esac
fi
done
: > ./_SUBDIRS
for d in $compilefirst; do
echo $d >> ./_SUBDIRS
done
(for d in $dirs; do
list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1`
for s in $list; do
echo $s $d
done
list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1`
for s in $list; do
echo $d $s
done
echo $d $d
done ) | tsort >> ./_SUBDIRS
for d in $compilelast; do
echo $d >> ./_SUBDIRS
done
if test -r subdirs && cmp -s subdirs _SUBDIRS; then
rm -f _SUBDIRS
fi
test -r _SUBDIRS && mv _SUBDIRS subdirs || true
}
Makefile_am()
{
if test -f Makefile.am.in; then
compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1`
compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1`
idirs=
dirs=
if test -f inst-apps; then
idirs=`cat inst-apps`
else
idirs=`cat subdirs`
fi
for i in $idirs; do
case " $compilefirst $compilelast " in
*" $i "*) ;;
*) dirs="$dirs $i"
esac
done
adds=`fgrep '$(top_srcdir)/acinclude.m4:' Makefile.am.in | sed -e 's,^[^:]*: *,,; s,\$(top_srcdir)/,,g'`
if echo "$adds" | fgrep "*" >/dev/null ; then
adds=`ls -d -1 $adds 2>/dev/null`
fgrep -v '$(top_srcdir)/acinclude.m4:' Makefile.am.in > Makefile.am.in.adds
str='$(top_srcdir)/acinclude.m4:'
for add in $adds; do
str="$str \$(top_srcdir)/$add"
done
echo $str >> Makefile.am.in.adds
else
cat Makefile.am.in > Makefile.am.in.adds
fi
cat Makefile.am.in.adds | \
sed -e 's,^\s*\(COMPILE_BEFORE.*\),# \1,' | \
sed -e 's,^\s*\(COMPILE_AFTER.*\),# \1,' > Makefile.am
echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am
rm Makefile.am.in.adds
fi
}
acinclude_m4()
{
echo "*** Creating acinclude.m4"
adds=
if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then
strip_makefile
rm -f acinclude.m4
adds=`grep '\$(top_srcdir)/acinclude.m4:' $makefile_wo | sed -e 's,^[^:]*: *,,; s,\$(top_srcdir),.,g'`
if echo $adds | fgrep "*" >/dev/null ; then
adds=`ls -d -1 $adds 2>/dev/null`
else
$MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 || exit 1
fi
else
rm -f acinclude.m4
fi
# if it wasn't created up to now, then we do it better
if test ! -f acinclude.m4; then
cat admin/acinclude.m4.in admin/libtool.m4.in admin/pkg.m4.in $adds > acinclude.m4
fi
}
cvs_clean()
{
if test -d CVS; then :; else
echo "You don't have a toplevel CVS directory."
echo "You most certainly didn't use cvs to get these sources."
echo "But this function depends on cvs's information."
exit 1
fi
perl $admindir/cvs-clean.pl
}
package_merge()
{
catalogs=$POFILES
for cat in $catalogs; do
msgmerge -o $cat.new $cat $PACKAGE.pot
if test -s $cat.new; then
grep -v "\"POT-Creation" $cat.new > $cat.new.2
grep -v "\"POT-Creation" $cat >> $cat.new.1
if diff $cat.new.1 $cat.new.2; then
rm $cat.new
else
mv $cat.new $cat
fi
rm -f $cat.new.1 $cat.new.2
fi
done
}
extract_messages()
{
podir=${podir:-$PWD/po}
files=`find . -name Makefile.am | xargs egrep -l '^messages:' `
dirs=`for i in $files; do echo \`dirname $i\`; done`
tmpname="$PWD/messages.log"
if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi
if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi
export EXTRACTRC PREPARETIPS
for subdir in $dirs; do
test -z "$VERBOSE" || echo "Making messages in $subdir"
(cd $subdir
if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then
$EXTRACTRC *.rc *.ui *.kcfg > rc.cpp
else
candidates=`ls -1 *.rc *.ui *.kcfg 2>/dev/null`
if test -n "$candidates"; then
echo "$subdir has *.rc, *.ui or *.kcfg files, but not correct messages line"
fi
fi
if find . -name \*.c\* -o -name \*.h\* | xargs fgrep -s -q TDEAboutData ; then
echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp
else echo " " > _translatorinfo.cpp
fi
perl -e '$mes=0; while (<STDIN>) { next if (/^(if\s|else\s|endif)/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile
kdepotpath=${includedir:-`tde-config --expandvars --install include`}/kde.pot
$MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" srcdir=. \
XGETTEXT="${XGETTEXT:-xgettext} --foreign-user -C -ci18n -ki18n -ktr2i18n -kI18N_NOOP -kI18N_NOOP2 -kaliasLocale -x $kdepotpath" messages
exit_code=$?
if test "$exit_code" != 0; then
echo "make exit code: $exit_code"
fi
) 2>&1 | grep -v '^make\[1\]' > $tmpname
test -s $tmpname && { echo $subdir ; cat "$tmpname"; }
test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp
rm -f $subdir/_translatorinfo.cpp
rm -f $subdir/_transMakefile
done
rm -f $tmpname
}
package_messages()
{
rm -rf po.backup
mkdir po.backup
for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do
egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i
cat po/$i > po.backup/backup_$i
touch -r po/$i po.backup/backup_$i
rm po/$i
done
extract_messages
for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do
test -f po/$i || echo "disappeared: $i"
done
for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do
sed -e 's,^"Content-Type: text/plain; charset=CHARSET\\n"$,"Content-Type: text/plain; charset=UTF-8\\n",' po/$i > po/$i.new && mv po/$i.new po/$i
#msgmerge -q -o po/$i po/$i po/$i
egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot
if test -f po.backup/$i && ! cmp -s temp.pot po.backup/$i; then
echo "will update $i"
else
if test -f po.backup/backup_$i; then
test -z "$VERBOSE" || echo "I'm restoring $i"
mv po.backup/backup_$i po/$i
rm po.backup/$i
else
echo "will add $i"
fi
fi
done
rm -f temp.pot
rm -rf po.backup
}
unset LC_ALL || :
unset LANG || :
unset LC_CTYPE || :
unset LANGUAGE || :
unset CDPATH || :
admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'`
test "x$admindir" = "x$0" && admindir=.
test "x$MAKE" = x && MAKE=make
makefile_am=Makefile.am
makefile_wo=Makefile.am.wo
if test -f Makefile.am.in; then
makefile_am=Makefile.am.in
makefile_wo=Makefile.am.in.wo
rm -f $makefile_wo
fi
# Suck in the AUTOCONF detection code
. $admindir/detect-autoconf.sh
###
### Main
###
arg=`echo $1 | tr .- __`
case $arg in
cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \
cvs_clean | package_merge | package_messages | Makefile_am | acinclude_m4 | extract_messages ) $arg ;;
configure ) call_and_fix_autoconf ;;
* ) echo "Usage: cvs.sh <target>"
echo "Target can be one of:"
echo " cvs cvs-clean dist"
echo " configure.in configure.files"
echo " package-merge package-messages"
echo ""
echo "Usage: anything but $1"
exit 1 ;;
esac
if test -f $makefile_wo; then
rm $makefile_wo
fi
exit 0

43
admin/debianrules
Unescape View File

@ -1,43 +0,0 @@
#!/usr/bin/perl -w
use Shell qw(mv cp mkdir rm) ;
use File::Find;
use Cwd;
$origPwd = `pwd`;
chomp $origPwd;
$kde_prefix = "/usr";
$sysconfdir = "/etc";
$kde_includedir = "$kde_prefix/include/tde";
$infodir = "$kde_prefix/share/info";
$mandir = "$kde_prefix/share/man";
$qtdir = "/usr/share/qt3";
$kde_cgidir = "$kde_prefix/lib/cgi-bin";
$kde_confdir = "$sysconfdir/kde3";
$kde_htmldir = "$kde_prefix/share/doc/kde/HTML";
if (defined $ENV{DEB_BUILD_OPTIONS} &&
$ENV{DEB_BUILD_OPTIONS} =~ /\bnostrip\b/) {
$enable_debug="--enable-debug=full";
} else {
$enable_debug="--disable-debug";
}
if (@ARGV && $ARGV[0] eq 'echodirs') {
print STDOUT "export kde_prefix=$kde_prefix\n";
print STDOUT "export sysconfdir=$sysconfdir\n";
print STDOUT "export kde_includedir=$kde_includedir\n";
print STDOUT "export infodir=$infodir\n";
print STDOUT "export mandir=$mandir\n";
print STDOUT "export qtdir=$qtdir\n";
print STDOUT "export kde_cgidir=$kde_cgidir\n";
print STDOUT "export kde_confdir=$kde_confdir\n";
print STDOUT "export kde_htmldir=$kde_htmldir\n";
print STDOUT "configkde=$enable_debug --disable-rpath --prefix=\$(kde_prefix) --sysconfdir=\$(sysconfdir) --includedir=\$(kde_includedir) --infodir=\$(infodir) --mandir=\$(mandir) --with-qt-dir=\$(qtdir)\n";
exit
}

441
admin/depcomp
Unescape View File

@ -1,441 +0,0 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
# Copyright 1999, 2000 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# `libtool' can also be set to `yes' or `no'.
depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
"$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say).
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
tr ' ' '
' < "$tmpdepfile" |
## Some versions of gcc put a space before the `:'. On the theory
## that the space means something, we add a space to the output as
## well.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like `#:fec' to the end of the
# dependency line.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
tr '
' ' ' >> $depfile
echo >> $depfile
# The second pass generates a dummy entry for each header file.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> $depfile
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. This file always lives in the current directory.
# Also, the AIX compiler puts `$object:' at the start of each line;
# $object doesn't have directory information.
stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
tmpdepfile="$stripped.u"
outname="$stripped.o"
if test "$libtool" = yes; then
"$@" -Wc,-M
else
"$@" -M
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
if test -f "$tmpdepfile"; then
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
icc)
# Must come before tru64.
# Intel's C compiler understands `-MD -MF file'. However
# icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
# will fill foo.d with something like
# foo.o: sub/foo.c
# foo.o: sub/foo.h
# which is wrong. We want:
# sub/foo.o: sub/foo.c
# sub/foo.o: sub/foo.h
# sub/foo.c:
# sub/foo.h:
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
tru64)
# The Tru64 AIX compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in `foo.d' instead, so we check for that too.
# Subdirectories are respected.
tmpdepfile1="$object.d"
tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'`
if test "$libtool" = yes; then
"$@" -Wc,-MD
else
"$@" -MD
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
if test -f "$tmpdepfile1"; then
tmpdepfile="$tmpdepfile1"
else
tmpdepfile="$tmpdepfile2"
fi
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a space and a tab in the [].
sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the proprocessed file to stdout, regardless of -o,
# because we must use -o when running libtool.
test -z "$dashmflag" && dashmflag=-M
( IFS=" "
case " $* " in
*" --mode=compile "*) # this is libtool, let us make it quiet
for arg
do # cycle over the arguments
case "$arg" in
"--mode=compile")
# insert --quiet before "--mode=compile"
set fnord "$@" --quiet
shift # fnord
;;
esac
set fnord "$@" "$arg"
shift # fnord
shift # "$arg"
done
;;
esac
"$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
) &
proc=$!
"$@"
stat=$?
wait "$proc"
if test "$stat" != 0; then exit $stat; fi
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
tr ' ' '
' < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
# X makedepend
(
shift
cleared=no
for arg in "$@"; do
case $cleared in no)
set ""; shift
cleared=yes
esac
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift;;
-*)
;;
*)
set fnord "$@" "$arg"; shift;;
esac
done
obj_suffix="`echo $object | sed 's/^.*\././'`"
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
) &
proc=$!
"$@"
stat=$?
wait "$proc"
if test "$stat" != 0; then exit $stat; fi
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
tail +3 "$tmpdepfile" | tr ' ' '
' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the proprocessed file to stdout, regardless of -o,
# because we must use -o when running libtool.
( IFS=" "
case " $* " in
*" --mode=compile "*)
for arg
do # cycle over the arguments
case $arg in
"--mode=compile")
# insert --quiet before "--mode=compile"
set fnord "$@" --quiet
shift # fnord
;;
esac
set fnord "$@" "$arg"
shift # fnord
shift # "$arg"
done
;;
esac
"$@" -E |
sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
) &
proc=$!
"$@"
stat=$?
wait "$proc"
if test "$stat" != 0; then exit $stat; fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the proprocessed file to stdout, regardless of -o,
# because we must use -o when running libtool.
( IFS=" "
case " $* " in
*" --mode=compile "*)
for arg
do # cycle over the arguments
case $arg in
"--mode=compile")
# insert --quiet before "--mode=compile"
set fnord "$@" --quiet
shift # fnord
;;
esac
set fnord "$@" "$arg"
shift # fnord
shift # "$arg"
done
;;
esac
"$@" -E |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
) &
proc=$!
"$@"
stat=$?
wait "$proc"
if test "$stat" != 0; then exit $stat; fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
echo " " >> "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0

19
admin/deps.am
Unescape View File

@ -1,19 +0,0 @@
$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in $(top_srcdir)/admin/cvs.sh $(top_srcdir)/admin/pkg.m4.in
@cd $(top_srcdir) && $(SHELL) admin/cvs.sh acinclude_m4
$(top_srcdir)/configure.in: $(top_srcdir)/subdirs $(top_srcdir)/configure.files $(top_srcdir)/admin/cvs.sh
@cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure_in
$(top_srcdir)/configure.files: $(top_srcdir)/subdirs $(CONF_FILES)
@cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure.files $(top_srcdir)/admin/cvs.sh
$(top_srcdir)/Makefile.am: $(top_srcdir)/Makefile.am.in $(top_srcdir)/subdirs $(top_srcdir)/admin/cvs.sh
@cd $(top_srcdir) && $(SHELL) admin/cvs.sh Makefile_am
$(top_srcdir)/subdirs: $(top_srcdir)/Makefile.am.in $(top_srcdir)/admin/cvs.sh
@cd $(top_srcdir) && $(SHELL) admin/cvs.sh subdirs
# defining default rules for files that may not be present
$(top_srcdir)/Makefile.am.in:
$(CONF_FILES):

59
admin/detect-autoconf.sh
Unescape View File

@ -1,59 +0,0 @@
#! /bin/sh
# Global variables...
AUTOCONF="autoconf"
AUTOHEADER="autoheader"
AUTOM4TE="autom4te"
AUTOMAKE="automake"
ACLOCAL="aclocal"
# Please add higher versions first. The last version number is the minimum
# needed to compile KDE. Do not forget to include the name/version #
# separator if one is present, e.g. -1.2 where - is the separator.
KDE_AUTOCONF_VERS="-2.58 -2.57 257 -2.54 -2.53a -2.53 -2.52 -2.5x"
KDE_AUTOMAKE_VERS="-1.7 17 -1.6"
# We don't use variable here for remembering the type ... strings. Local
# variables are not that portable, but we fear namespace issues with our
# includer.
checkAutoconf()
{
for kde_autoconf_version in $KDE_AUTOCONF_VERS; do
if test -x "`$WHICH $AUTOCONF$kde_autoconf_version 2>/dev/null`"; then
AUTOCONF="`$WHICH $AUTOCONF$kde_autoconf_version`"
AUTOHEADER="`$WHICH $AUTOHEADER$kde_autoconf_version`"
AUTOM4TE="`$WHICH $AUTOM4TE$kde_autoconf_version`"
break
fi
done
}
checkAutomake ()
{
for kde_automake_version in $KDE_AUTOMAKE_VERS; do
if test -x "`$WHICH $AUTOMAKE$kde_automake_version 2>/dev/null`"; then
AUTOMAKE="`$WHICH $AUTOMAKE$kde_automake_version`"
ACLOCAL="`$WHICH $ACLOCAL$kde_automake_version`"
break
fi
done
if test "$UNSERMAKE" = yes && test -x "`$WHICH unsermake 2>/dev/null`"; then
AUTOMAKE="`$WHICH unsermake` -c"
fi
}
checkWhich ()
{
WHICH=""
for i in "type -p" "which" "type" ; do
T=`$i sh 2> /dev/null`
test -x "$T" && WHICH="$i" && break
done
}
checkWhich
checkAutoconf
checkAutomake
export WHICH AUTOHEADER AUTOCONF AUTOM4TE AUTOMAKE ACLOCAL

96
admin/do_make
Unescape View File

@ -1,96 +0,0 @@
#!/bin/bash
# this is a script around make which basicly checks
# if it's in srcdir or in builddir and changes to
# the right directory for calling /usr/bin/make
# (C) Stephan Kulow
# You may need to set OBJ_REPLACEMENT variable to get it to work.
# In the variable use the sed syntax to switch directories, for example
# export OBJ_REPLACEMENT="s:/home/zack/cvs/kde:/home/zack/build:"
# will assure that the builds are performed under /home/zack/build
# directory, when the cvs is held under /home/zack/cvs/kde.
file=Makefile
dir=.
args=()
jobs=
while test $# -gt 0 ; do
case "${1}" in
-f)
shift
file="${1}"
shift
args=("${args[@]}" -f $file)
;;
-C)
shift
dir="${1}"
shift ;;
-j)
shift
jobs="${1}"
shift ;;
-j*)
jobs="${1/-j/}"
shift ;;
*)
args=("${args[@]}" "$1")
shift
;;
esac
done
if test ! -f $dir/$file; then
if test -n "$OBJ_SUBDIR"; then
dir=$PWD
subdir=.
while test ! -f $dir/$OBJ_SUBDIR/$file; do
subdir=`basename $dir`"/$subdir"
dir=`dirname $dir`
if test "$dir" = "/"; then
# the case that someone puts the compile dir in /
# is very unlikely, so we better skip here ;)
echo "can't find $OBJ_SUBDIR above current dir"
exit 1
fi
done
cd $dir/$OBJ_SUBDIR/$subdir
else
if test -n "$OBJ_REPLACEMENT"; then
pwd=`echo $PWD | sed -e "$OBJ_REPLACEMENT"`
if test ! -f $pwd/$dir/$file; then
echo "no objdir found. Tried $pwd"
exit 1
fi
cd $pwd/$dir
fi
fi
else
cd $dir
fi
echo "makeobj[0]: Entering directory \`$PWD'"
if test -z "$MAKE"; then
if head -n 1 $file | grep unsermake >/dev/null; then
MAKE=`type -p unsermake`
if test ! -x "$MAKE"; then
echo 'Makefile was created with unsermake, but there'
echo 'is no unsermake in $PATH'
exit 1
fi
args=("${args[@]}" --no-real-compare)
if test -n "$jobs"; then args=("${args[@]}" --compile-jobs $jobs); fi
else
MAKE=/usr/bin/make
if test -n "$jobs"; then args=("${args[@]}" -j $jobs); fi
fi
fi
echo "Calling $MAKE ${args[@]}"
LANGUAGE=C $MAKE "${args[@]}"
retval=$?
echo "makeobj[0]: Leaving directory \`$PWD'"
exit $retval

276
admin/install-sh
Unescape View File

@ -1,276 +0,0 @@
#!/bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission. M.I.T. makes no representations about the
# suitability of this software for any purpose. It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd=$cpprog
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd=$stripprog
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "$0: no input file specified" >&2
exit 1
else
:
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d "$dst" ]; then
instcmd=:
chmodcmd=""
else
instcmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f "$src" ] || [ -d "$src" ]
then
:
else
echo "$0: $src does not exist" >&2
exit 1
fi
if [ x"$dst" = x ]
then
echo "$0: no destination specified" >&2
exit 1
else
:
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d "$dst" ]
then
dst=$dst/`basename "$src"`
else
:
fi
fi
## this sed command emulates the dirname command
dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-$defaultIFS}"
oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS=$oIFS
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp=$pathcomp$1
shift
if [ ! -d "$pathcomp" ] ;
then
$mkdirprog "$pathcomp"
else
:
fi
pathcomp=$pathcomp/
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd "$dst" &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename "$dst"`
else
dstfile=`basename "$dst" $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename "$dst"`
else
:
fi
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/#inst.$$#
rmtmp=$dstdir/#rm.$$#
# Trap to clean up temp files at exit.
trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
trap '(exit $?); exit' 1 2 13 15
# Move or copy the file name to the temp name
$doit $instcmd "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
# Now remove or move aside any old file at destination location. We try this
# two ways since rm can't unlink itself on some systems and the destination
# file might be busy for other reasons. In this case, the final cleanup
# might fail but the new file should still install successfully.
{
if [ -f "$dstdir/$dstfile" ]
then
$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
{
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
(exit 1); exit
}
else
:
fi
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
fi &&
# The final little trick to "correctly" pass the exit status to the exit trap.
{
(exit 0); exit
}

5891
admin/libtool.m4.in vendored
View File

File diff suppressed because it is too large Load Diff

6401
admin/ltmain.sh
View File

File diff suppressed because it is too large Load Diff

336
admin/missing
Unescape View File

@ -1,336 +0,0 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
run=:
# In the cases where this matters, `missing' is being run in the
# srcdir already.
if test -f configure.ac; then
configure_ac=configure.ac
else
configure_ac=configure.in
fi
case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
--run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
help2man touch the output file
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing 0.4 - GNU automake"
;;
-*)
echo 1>&2 "$0: Unknown \`$1' option"
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
;;
aclocal*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
esac
done
touch $touch_files
;;
automake*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
sed 's/\.am$/.in/' |
while read f; do touch "$f"; done
;;
autom4te)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them.
You can get \`$1Help2man' as part of \`Autoconf' from any GNU
archive site."
file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo "#! /bin/sh"
echo "# Created by GNU Automake missing as a replacement of"
echo "# $ $@"
echo "exit 0"
chmod +x $file
exit 1
fi
;;
bison|yacc)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
lex|flex)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
help2man)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
fi
if [ -f "$file" ]; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
exit 1
fi
;;
makeinfo)
if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
# We have makeinfo, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
fi
touch $file
;;
tar)
shift
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
fi
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
# messages.
if (gnutar --version > /dev/null 2>&1); then
gnutar "$@" && exit 0
fi
if (gtar --version > /dev/null 2>&1); then
gtar "$@" && exit 0
fi
firstarg="$1"
if shift; then
case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
;;
esac
fi
echo 1>&2 "\
WARNING: I can't seem to be able to run \`tar' with the given arguments.
You may want to install GNU tar or Free paxutils, or check the
command line arguments."
exit 1
;;
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequirements for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
;;
esac
exit 0

111
admin/mkinstalldirs
Unescape View File

@ -1,111 +0,0 @@
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
# Author: Noah Friedman <friedman@prep.ai.mit.edu>
# Created: 1993-05-16
# Public domain
errstatus=0
dirmode=""
usage="\
Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
# process command line arguments
while test $# -gt 0 ; do
case $1 in
-h | --help | --h*) # -h for help
echo "$usage" 1>&2
exit 0
;;
-m) # -m PERM arg
shift
test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
dirmode=$1
shift
;;
--) # stop option processing
shift
break
;;
-*) # unknown option
echo "$usage" 1>&2
exit 1
;;
*) # first non-opt arg
break
;;
esac
done
for file
do
if test -d "$file"; then
shift
else
break
fi
done
case $# in
0) exit 0 ;;
esac
case $dirmode in
'')
if mkdir -p -- . 2>/dev/null; then
echo "mkdir -p -- $*"
exec mkdir -p -- "$@"
fi
;;
*)
if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
echo "mkdir -m $dirmode -p -- $*"
exec mkdir -m "$dirmode" -p -- "$@"
fi
;;
esac
for file
do
set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
shift
pathcomp=
for d
do
pathcomp="$pathcomp$d"
case $pathcomp in
-*) pathcomp=./$pathcomp ;;
esac
if test ! -d "$pathcomp"; then
echo "mkdir $pathcomp"
mkdir "$pathcomp" || lasterr=$?
if test ! -d "$pathcomp"; then
errstatus=$lasterr
else
if test ! -z "$dirmode"; then
echo "chmod $dirmode $pathcomp"
lasterr=""
chmod "$dirmode" "$pathcomp" || lasterr=$?
if test ! -z "$lasterr"; then
errstatus=$lasterr
fi
fi
fi
fi
pathcomp="$pathcomp/"
done
done
exit $errstatus
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# End:
# mkinstalldirs ends here

371
admin/nmcheck
Unescape View File

@ -1,371 +0,0 @@
#!/usr/bin/perl -w
# Check namespace cleanness of a library.
# Allowed symbols are passed as arguments.
# They may have trailing * = wildcard.
# Wildcards may be also specified as *::* (e.g. K*::* for all KDE classes)
# Symbols are listed as full function unmangled names without arguments,
# e.g. 'foo bar* nspace::*' allows foo(), foo(int), bar(), barbar()
# and all symbols in namespace/class nspace.
# If an argument has comma in it, it's a filename of a file containing
# allowed symbols, one per line.
$thisProg = "$0"; # This programs name
$library = "";
$allowed_symbols = "";
$debug = 0;
$allowed_weak = "";
$weak_specified = 0;
while( defined( $ARGV[ 0 ] ))
{
$_ = shift;
if( /^--verbose$|^-v$/ )
{
$debug = 1;
}
elsif( /^--help$|^-h$/ )
{
print STDOUT "Usage $thisProg [OPTION] ... library [allowed symbols] ...\n",
"\n",
"Check if the given library has only allowed public symbols.\n",
"\n",
" --allowweak=[symbol] allow only these weak symbols\n",
" -v, --verbose verbosely list files processed\n",
" -h, --help print this help, then exit\n";
exit 0;
}
elsif( /^--allowweak=(.*)$/ )
{
$allowed_weak .= " " . $1;
$weak_specified = 1;
}
elsif( /^--allowweak$/ ) # simply list all weak
{
$allowed_weak .= " ";
$weak_specified = 1;
}
elsif( /^--*/ )
{
die "Invalid argument!\n";
}
else
{
if( ! $library )
{
$library = $_;
}
else
{
$allowed_symbols .= " " . $_;
}
}
}
if( ! $weak_specified )
{
$allowed_weak = "*";
# allow all weak symbols by default
# instances of templates and similar stuff - unfortunately includes also things from other libraries,
# so it cannot be on by default
}
print STDERR "library:" . $library . "\n" if $debug;
print STDERR "allowed_symbols:" . $allowed_symbols . "\n" if $debug;
print STDERR "allowed_weak:" . $allowed_weak . "\n" if $debug;
$default_symbols = "_fini _init"; # system symbols
# on my system, every .so has :
# A _DYNAMIC
# A _GLOBAL_OFFSET_TABLE_
# A __bss_start
# A _edata
# A _end
# T _fini
# T _init
# no need to list A symbols in $default_symbols
print STDERR "default_symbols: " . $default_symbols . "\n" if $debug;
print STDOUT "Namespace cleanness check for " . $library . " :\n";
$lib_file = "";
if( $library =~ /\.la$/ )
{
# get the real library file from .la
open( FILEIN, $library ) || die "Couldn't open $! !\n";
while( $line = <FILEIN> )
{
if( $line =~ /library_names=\'([^ ]*).*/o )
{
$lib_file = $1;
}
}
close( FILEIN );
if( ! $lib_file )
{
print STDERR "Library file not found in .la file!\n";
exit 1;
}
my $libpath = $library;
$libpath =~ s%[^/]*$%%;
if( -e $libpath . ".libs/" . $lib_file )
{
$lib_file = $libpath . ".libs/" . $lib_file;
}
else
{
$lib_file = $libpath . $lib_file;
}
}
else
{
$lib_file = $library;
}
print STDERR "libfile: ". $lib_file . "\n" if $debug;
$allowed_symbols .= " " . $default_symbols;
sub process_symbols($\@\%\@);
@wildcards = ();
%exacts = ();
@regwildcards = ();
process_symbols( $allowed_symbols, @wildcards, %exacts, @regwildcards );
@weak_wildcards = ();
%weak_exacts = ();
@weak_regwildcards = ();
process_symbols( $allowed_weak, @weak_wildcards, %weak_exacts, @weak_regwildcards );
# grep is for stripping not exported symbols, which don't have address (=first column)
$nm_command = "nm -BDCg " . $lib_file . " | grep -v '^ ' |";
# TODO how portable is this nmcheck stuff?
print STDERR "nm command:" . $nm_command . "\n" if $debug;
open( FILEIN, $nm_command ) || die "nm command failed\n";
my $exit_code = 0;
while( $line = <FILEIN> )
{
my $type;
my $symbol;
if( $line =~ /^[^ ]* (.) (.*)$/o )
{
$type = $1;
$symbol = $2;
}
else
{
die "Invalid line: " . $line . "\n";
}
print STDERR "Type: " . $type . " , symbol: " . $symbol . "\n" if $debug;
if( $type eq "A" )
{ # these should be system symbols, so ignore them
next;
}
my $orig_symbol = $symbol;
if( $symbol =~ /\(anonymous namespace\)/o )
{ # TODO tell to prefer named namespaces? (shorter symbols)
next;
}
# strip prefixes
# the :: appending is to make "CLASS::*" work also for "vtable for CLASS"
$symbol =~ s/^typeinfo for (.*)$/$1::/o;
$symbol =~ s/^typeinfo fn for (.*)$/$1::/o;
$symbol =~ s/^typeinfo name for (.*)$/$1::/o;
$symbol =~ s/^vtable for (.*)$/$1::/o;
$symbol =~ s/^guard variable for (.*)$/$1::/o;
$symbol =~ s/^reference temporary for (.*)$/$1::/o;
$symbol =~ s/^VTT for (.*)$/$1::/o;
$symbol =~ s/^virtual thunk \[[^\]]*\] to (.*)$/$1::/o;
$symbol =~ s/^non-virtual thunk \[[^\]]*\] to (.*)$/$1::/o;
$symbol =~ s/^covariant return thunk \[[^\]]*\] to (.*)$/$1::/o;
$symbol =~ s/^construction vtable thunk for (.*)$/$1::/o;
$symbol =~ s/^construction vtable for .*-in-(.*) [0-9]*$/$1::/o;
# templates seem to have also return types mangled in their name, and nm prints it too
# they have also template arguments in the symbol
# get rid of both of those
while( $symbol =~ /<.*>/o )
{
$symbol =~ s/<[^<>]*>//o; # strip innermost <>
}
if( $symbol !~ /operator\(\)/o )
{
$symbol =~ s/ ?\(.*\).*$//o; # strip () and all after it
}
else
{
$symbol =~ s/(^|:| )operator\(\) ?\(.*\).*$//o; # strip () and all after it
}
$symbol =~ s/\[.*\] *$//o; # strip [in-charge] etc.
if( $symbol =~ /(^|:| )operator /o )
{
$symbol =~ s/.* ([^\s]*)operator /$1/o; # strip everything before 'X::operator blah'
}
else
{
$symbol =~ s/.* ([^\s]+) *$/$1/o; # get last word (strip return type)
}
# print STDERR "Processed symbol: " . $symbol . "\n" if $debug;
my $found = 0;
if( $exacts{ $symbol } )
{
$found = 1;
}
if( ! $found )
{
for my $wild ( @wildcards )
{
if( index( $symbol, $wild ) == 0 )
{
$found = 1;
last;
}
}
}
if( ! $found )
{
for my $wild ( @regwildcards )
{
if( $symbol =~ /^$wild$/ )
{
$found = 1;
last;
}
}
}
if( ( ! $found ) && ( $type eq "W" || $type eq "V" ))
{
if( $weak_exacts{ $symbol } )
{
$found = 1;
}
if( ! $found )
{
for my $wild ( @weak_wildcards )
{
if( index( $symbol, $wild ) == 0 )
{
$found = 1;
last;
}
}
}
if( ! $found )
{
for my $wild ( @weak_regwildcards )
{
if( $symbol =~ /^$wild$/ )
{
$found = 1;
last;
}
}
}
}
if( ! $found )
{
print STDERR "Public symbol " . $orig_symbol . " is not allowed!\n";
$exit_code = 1;
}
}
close( FILEIN );
print STDOUT $exit_code == 0 ? "OK\n" : "FAILED\n";
exit $exit_code;
sub process_symbols($\@\%\@)
{
my $allowed_symbols = $_[ 0 ];
my $wildcards_ref = $_[ 1 ];
my $exacts_ref = $_[ 2 ];
my $regwildcards_ref = $_[ 3 ];
$allowed_symbols =~ s/^ *//o; # strip whitespace
$allowed_symbols =~ s/ *$//o;
if( $allowed_symbols eq "NONE" )
{
$allowed_symbols = "";
}
my @symbols1 = split( ' ', $allowed_symbols );
my $i = 0;
my @symbols2 = ();
while( defined( $symbols1[ $i ] ))
{
my $symbol = $symbols1[ $i ];
if( $symbol =~ /\./ ) # dot in name -> file
{
open( SYMIN, $symbol ) || die ( "Cannot open file " . $symbol . "!" );
while( $line = <SYMIN> )
{
$line =~ s/^\s*//o; # strip whitespace
$line =~ s/\s*$//o;
if( $line !~ /^$/o # empty line
&& $line !~ /^\s*#/ ) # comment line starting with #
{
$symbols2[ $#symbols2 + 1 ] = $line;
}
}
close( SYMIN );
}
else
{
$symbols2[ $#symbols2 + 1 ] = $symbol;
}
$i++;
}
$i = 0;
while( defined( $symbols2[ $i ] ))
{
my $symbol = $symbols2[ $i ];
if( $symbol =~ /__/
|| $symbol =~ /^_[A-Z]/ )
{ # ISO C++ 2.10.2
die "Symbols containing a double underscore or beginning with an underscore and an upper-case letter are reserved!\n";
}
elsif( $symbol eq "main"
|| $symbol eq "main*" )
{
die "Symbol main is not allowed!\n";
}
if( $symbol =~ /^([^\*]*)\*$/o # trailing * without any * before it
&& $symbol !~ /operator\*$/o )
{
print STDERR "wildcard:" . $symbol . "\n" if $debug;
$wildcards_ref->[ $#{$wildcards_ref} + 1 ] = $1;
}
elsif( $symbol =~ /\*$/o
&& ( $symbol =~ /\*::/o || $symbol =~ /::\*/o )
&& $symbol !~ /^\*/o
&& $symbol !~ /operator\*$/o )
{
print STDERR "regwildcard:" . $symbol . "\n" if $debug;
$symbol =~ s/\*/\.\*/go; # change * to .* (regexp)
$regwildcards_ref->[ $#{$regwildcards_ref} + 1 ] = $symbol;
}
else
{
print STDERR "exact:" . $symbol . "\n" if $debug;
$exacts_ref->{ $symbol } = 1;
}
$i++;
}
}

192
admin/oldinclude.m4.in
Unescape View File

@ -1,192 +0,0 @@
### -*- autoconf -*-
dnl This file is part of the KDE libraries/packages
dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu)
dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org)
dnl This file is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Library General Public
dnl License as published by the Free Software Foundation; either
dnl version 2 of the License, or (at your option) any later version.
dnl This library is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl Library General Public License for more details.
dnl You should have received a copy of the GNU Library General Public License
dnl along with this library; see the file COPYING.LIB. If not, write to
dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
dnl Boston, MA 02111-1307, USA.
AC_DEFUN([KDE_CHECK_MICO],
[
AC_REQUIRE([KDE_CHECK_LIBDL])
AC_REQUIRE([KDE_MISC_TESTS])
AC_MSG_CHECKING(for MICO)
if test -z "$MICODIR"; then
kde_micodir=/usr/local
else
kde_micodir="$MICODIR"
fi
AC_ARG_WITH(micodir,
[ --with-micodir=micodir where mico is installed ],
kde_micodir=$withval,
kde_micodir=$kde_micodir
)
AC_CACHE_VAL(kde_cv_mico_incdir,
[
mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes"
AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir)
])
kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'`
if test ! -r $kde_micodir/include/CORBA.h; then
AC_MSG_ERROR([No CORBA.h found, specify another micodir])
fi
AC_MSG_RESULT($kde_micodir)
MICO_INCLUDES=-I$kde_micodir/include
AC_SUBST(MICO_INCLUDES)
MICO_LDFLAGS=-L$kde_micodir/lib
AC_SUBST(MICO_LDFLAGS)
micodir=$kde_micodir
AC_SUBST(micodir)
AC_MSG_CHECKING([for MICO version])
AC_CACHE_VAL(kde_cv_mico_version,
[
AC_LANG_C
cat >conftest.$ac_ext <<EOF
#include <stdio.h>
#include <mico/version.h>
int main() {
printf("MICO_VERSION=%s\n",MICO_VERSION);
return (0);
}
EOF
ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest'
if AC_TRY_EVAL(ac_compile); then
if eval `./conftest 2>&5`; then
kde_cv_mico_version=$MICO_VERSION
else
AC_MSG_ERROR([your system is not able to execute a small application to
find MICO version! Check $kde_micodir/include/mico/version.h])
fi
else
AC_MSG_ERROR([your system is not able to compile a small application to
find MICO version! Check $kde_micodir/include/mico/version.h])
fi
])
dnl installed MICO version
mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
if test "x$1" = "x"; then
req_version="2.3.0"
else
req_version=$1
fi
dnl required MICO version
req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'`
req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
if test "$mico_v_maj" -lt "$req_v_maj" || \
( test "$mico_v_maj" -eq "$req_v_maj" && \
test "$mico_v_mid" -lt "$req_v_mid" ) || \
( test "$mico_v_mid" -eq "$req_v_mid" && \
test "$mico_v_min" -lt "$req_v_min" )
then
AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \
at least is required. You should upgrade MICO.])
else
AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)])
fi
LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL"
AC_SUBST(LIBMICO)
if test -z "$IDL"; then
IDL='$(kde_bindir)/cuteidl'
fi
AC_SUBST(IDL)
IDL_DEPENDENCIES='$(kde_includes)/CUTE.h'
AC_SUBST(IDL_DEPENDENCIES)
idldir="\$(includedir)/idl"
AC_SUBST(idldir)
])
AC_DEFUN([KDE_CHECK_MINI_STL],
[
AC_REQUIRE([KDE_CHECK_MICO])
AC_MSG_CHECKING(if we use mico's mini-STL)
AC_CACHE_VAL(kde_cv_have_mini_stl,
[
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
kde_save_cxxflags="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS $MICO_INCLUDES"
AC_TRY_COMPILE(
[
#include <mico/config.h>
],
[
#ifdef HAVE_MINI_STL
#error "nothing"
#endif
],
kde_cv_have_mini_stl=no,
kde_cv_have_mini_stl=yes)
CXXFLAGS="$kde_save_cxxflags"
AC_LANG_RESTORE
])
if test "x$kde_cv_have_mini_stl" = "xyes"; then
AC_MSG_RESULT(yes)
$1
else
AC_MSG_RESULT(no)
$2
fi
])
])
AC_DEFUN([KDE_CHECK_ANSI],
[
])
AC_DEFUN([KDE_CHECK_INSURE],
[
AC_ARG_ENABLE(insure, [ --enable-insure use insure++ for debugging [default=no]],
[
if test $enableval = "no"; dnl
then ac_use_insure="no"
else ac_use_insure="yes"
fi
], [ac_use_insure="no"])
AC_MSG_CHECKING(if we will use Insure++ to debug)
AC_MSG_RESULT($ac_use_insure)
if test "$ac_use_insure" = "yes"; dnl
then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "????
fi
])
AC_DEFUN([KDE_CHECK_NEWLIBS],
[
])

57
admin/pkg.m4.in
Unescape View File

@ -1,57 +0,0 @@
dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
dnl also defines GSTUFF_PKG_ERRORS on error
AC_DEFUN([PKG_CHECK_MODULES], [
succeeded=no
if test -z "$PKG_CONFIG"; then
AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
fi
if test "$PKG_CONFIG" = "no" ; then
echo "*** The pkg-config script could not be found. Make sure it is"
echo "*** in your path, or set the PKG_CONFIG environment variable"
echo "*** to the full path to pkg-config."
echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
else
PKG_CONFIG_MIN_VERSION=0.9.0
if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
AC_MSG_CHECKING(for $2)
if $PKG_CONFIG --exists "$2" ; then
AC_MSG_RESULT(yes)
succeeded=yes
AC_MSG_CHECKING($1_CFLAGS)
$1_CFLAGS=`$PKG_CONFIG --cflags "$2"`
AC_MSG_RESULT($$1_CFLAGS)
AC_MSG_CHECKING($1_LIBS)
$1_LIBS=`$PKG_CONFIG --libs "$2"`
AC_MSG_RESULT($$1_LIBS)
else
$1_CFLAGS=""
$1_LIBS=""
## If we have a custom action on failure, don't print errors, but
## do set a variable so people can do so.
$1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
ifelse([$4], ,echo $$1_PKG_ERRORS,)
fi
AC_SUBST($1_CFLAGS)
AC_SUBST($1_LIBS)
else
echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
echo "*** See http://www.freedesktop.org/software/pkgconfig"
fi
fi
if test $succeeded = yes; then
ifelse([$3], , :, [$3])
else
ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4])
fi
])

143
admin/ylwrap
Unescape View File

@ -1,143 +0,0 @@
#! /bin/sh
# ylwrap - wrapper for lex/yacc invocations.
# Copyright 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Usage:
# ylwrap INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
# * INPUT is the input file
# * OUTPUT is file PROG generates
# * DESIRED is file we actually want
# * PROGRAM is program to run
# * ARGS are passed to PROG
# Any number of OUTPUT,DESIRED pairs may be used.
# The input.
input="$1"
shift
case "$input" in
[\\/]* | ?:[\\/]*)
# Absolute path; do nothing.
;;
*)
# Relative path. Make it absolute.
input="`pwd`/$input"
;;
esac
# The directory holding the input.
input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'`
# Quote $INPUT_DIR so we can use it in a regexp.
# FIXME: really we should care about more than `.' and `\'.
input_rx=`echo "$input_dir" | sed -e 's,\\\\,\\\\\\\\,g' -e 's,\\.,\\\\.,g'`
echo "got $input_rx"
pairlist=
while test "$#" -ne 0; do
if test "$1" = "--"; then
shift
break
fi
pairlist="$pairlist $1"
shift
done
# The program to run.
prog="$1"
shift
# Make any relative path in $prog absolute.
case "$prog" in
[\\/]* | ?:[\\/]*) ;;
*[\\/]*) prog="`pwd`/$prog" ;;
esac
# FIXME: add hostname here for parallel makes that run commands on
# other machines. But that might take us over the 14-char limit.
dirname=ylwrap$$
trap "cd `pwd`; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15
mkdir $dirname || exit 1
cd $dirname
$prog ${1+"$@"} "$input"
status=$?
if test $status -eq 0; then
set X $pairlist
shift
first=yes
# Since DOS filename conventions don't allow two dots,
# the DOS version of Bison writes out y_tab.c instead of y.tab.c
# and y_tab.h instead of y.tab.h. Test to see if this is the case.
y_tab_nodot="no"
if test -f y_tab.c || test -f y_tab.h; then
y_tab_nodot="yes"
fi
while test "$#" -ne 0; do
from="$1"
# Handle y_tab.c and y_tab.h output by DOS
if test $y_tab_nodot = "yes"; then
if test $from = "y.tab.c"; then
from="y_tab.c"
else
if test $from = "y.tab.h"; then
from="y_tab.h"
fi
fi
fi
if test -f "$from"; then
# If $2 is an absolute path name, then just use that,
# otherwise prepend `../'.
case "$2" in
[\\/]* | ?:[\\/]*) target="$2";;
*) target="../$2";;
esac
# Edit out `#line' or `#' directives. We don't want the
# resulting debug information to point at an absolute srcdir;
# it is better for it to just mention the .y file with no
# path.
sed -e "/^#/ s,$input_rx,," "$from" > "$target" || status=$?
else
# A missing file is only an error for the first file. This
# is a blatant hack to let us support using "yacc -d". If -d
# is not specified, we don't want an error when the header
# file is "missing".
if test $first = yes; then
status=1
fi
fi
shift
shift
first=no
done
else
status=$?
fi
# Remove the directory.
cd ..
rm -rf $dirname
exit $status

244
config.h.in
Unescape View File

@ -1,244 +0,0 @@
/* config.h.in. Generated from configure.in by autoheader. */
/* Define to 1 if you have the <Carbon/Carbon.h> header file. */
#undef HAVE_CARBON_CARBON_H
/* Define if you have the CoreAudio API */
#undef HAVE_COREAUDIO
/* Define to 1 if you have the <crt_externs.h> header file. */
#undef HAVE_CRT_EXTERNS_H
/* Defines if your system has the crypt function */
#undef HAVE_CRYPT
/* Define to 1 if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H
/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
/* Define if you have libjpeg */
#undef HAVE_LIBJPEG
/* Define if you have libpng */
#undef HAVE_LIBPNG
/* Define if you have a working libpthread (will enable threaded code) */
#undef HAVE_LIBPTHREAD
/* Define if you have libz */
#undef HAVE_LIBZ
/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
/* Define if your system needs _NSGetEnviron to set up the environment */
#undef HAVE_NSGETENVIRON
/* Define if you have res_init */
#undef HAVE_RES_INIT
/* Define if you have the res_init prototype */
#undef HAVE_RES_INIT_PROTO
/* Define if you have a STL implementation by SGI */
#undef HAVE_SGI_STL
/* Define to 1 if you have the `snprintf' function. */
#undef HAVE_SNPRINTF
/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H
/* Define if you have strlcat */
#undef HAVE_STRLCAT
/* Define if you have the strlcat prototype */
#undef HAVE_STRLCAT_PROTO
/* Define if you have strlcpy */
#undef HAVE_STRLCPY
/* Define if you have the strlcpy prototype */
#undef HAVE_STRLCPY_PROTO
/* Define to 1 if you have the <sys/bitypes.h> header file. */
#undef HAVE_SYS_BITYPES_H
/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
/* Define to 1 if you have the `vsnprintf' function. */
#undef HAVE_VSNPRINTF
/* Suffix for lib directories */
#undef KDELIBSUFF
/* Define a safe value for MAXPATHLEN */
#undef KDEMAXPATHLEN
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* The size of a `char *', as computed by sizeof. */
#undef SIZEOF_CHAR_P
/* The size of a `int', as computed by sizeof. */
#undef SIZEOF_INT
/* The size of a `long', as computed by sizeof. */
#undef SIZEOF_LONG
/* The size of a `short', as computed by sizeof. */
#undef SIZEOF_SHORT
/* The size of a `size_t', as computed by sizeof. */
#undef SIZEOF_SIZE_T
/* The size of a `unsigned long', as computed by sizeof. */
#undef SIZEOF_UNSIGNED_LONG
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
/* Version number of package */
#undef VERSION
/* Defined if compiling without arts */
#undef WITHOUT_ARTS
/* Define to 1 if your processor stores words with the most significant byte
first (like Motorola and SPARC, unlike Intel and VAX). */
#undef WORDS_BIGENDIAN
/*
* jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system
* headers and I'm too lazy to write a configure test as long as only
* unixware is related
*/
#ifdef _UNIXWARE
#define HAVE_BOOLEAN
#endif
/*
* AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
* that defines bzero.
*/
#if defined(_AIX)
#include <strings.h>
#endif
#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H)
# include <sys/time.h>
# include <crt_externs.h>
# define environ (*_NSGetEnviron())
#endif
#if !defined(HAVE_RES_INIT_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
int res_init(void);
#ifdef __cplusplus
}
#endif
#endif
#if !defined(HAVE_STRLCAT_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
unsigned long strlcat(char*, const char*, unsigned long);
#ifdef __cplusplus
}
#endif
#endif
#if !defined(HAVE_STRLCPY_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
unsigned long strlcpy(char*, const char*, unsigned long);
#ifdef __cplusplus
}
#endif
#endif
/*
* On HP-UX, the declaration of vsnprintf() is needed every time !
*/
#if !defined(HAVE_VSNPRINTF) || defined(hpux)
#if __STDC__
#include <stdarg.h>
#include <stdlib.h>
#else
#include <varargs.h>
#endif
#ifdef __cplusplus
extern "C"
#endif
int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
#ifdef __cplusplus
extern "C"
#endif
int snprintf(char *str, size_t n, char const *fmt, ...);
#endif
#if defined(__SVR4) && !defined(__svr4__)
#define __svr4__ 1
#endif
/* type to use in place of socklen_t if not defined */
#undef kde_socklen_t
/* type to use in place of socklen_t if not defined (deprecated, use
kde_socklen_t) */
#undef ksize_t

34138
configure vendored
View File

File diff suppressed because it is too large Load Diff

2
configure.files
Unescape View File

@ -1,2 +0,0 @@
./admin/configure.in.min
configure.in.in

108
configure.in
Unescape View File

@ -1,108 +0,0 @@
dnl =======================================================
dnl FILE: ./admin/configure.in.min
dnl =======================================================
dnl This file is part of the KDE libraries/packages
dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
dnl This file is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Library General Public
dnl License as published by the Free Software Foundation; either
dnl version 2 of the License, or (at your option) any later version.
dnl This library is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl Library General Public License for more details.
dnl You should have received a copy of the GNU Library General Public License
dnl along with this library; see the file COPYING.LIB. If not, write to
dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
dnl Boston, MA 02111-1307, USA.
# Original Author was Kalle@kde.org
# I lifted it in some mater. (Stephan Kulow)
# I used much code from Janos Farkas
dnl Process this file with autoconf to produce a configure script.
AC_INIT(acinclude.m4) dnl a source file from your sub dir
dnl This is so we can use kde-common
AC_CONFIG_AUX_DIR(admin)
dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
unset CDPATH
dnl Checking host/target/build systems, for make, install etc.
AC_CANONICAL_SYSTEM
dnl Perform program name transformation
AC_ARG_PROGRAM
dnl Automake doc recommends to do this only here. (Janos)
AM_INIT_AUTOMAKE(kommando, 0.1) dnl searches for some needed programs
KDE_SET_PREFIX
dnl generate the config header
AM_CONFIG_HEADER(config.h) dnl at the distribution this done
dnl Checks for programs.
AC_CHECK_COMPILERS
AC_ENABLE_SHARED(yes)
AC_ENABLE_STATIC(no)
KDE_PROG_LIBTOOL
dnl for NLS support. Call them in this order!
dnl WITH_NLS is for the po files
AM_KDE_WITH_NLS
KDE_USE_QT(3.2.0)
AC_PATH_KDE
dnl =======================================================
dnl FILE: configure.in.in
dnl =======================================================
#MIN_CONFIG(3.2.0)
dnl PACKAGE set before
AC_C_BIGENDIAN
AC_CHECK_KDEMAXPATHLEN
KDE_CREATE_SUBDIRSLIST
AC_CONFIG_FILES([ Makefile ])
AC_CONFIG_FILES([ doc/Makefile ])
AC_CONFIG_FILES([ doc/en/Makefile ])
AC_CONFIG_FILES([ po/Makefile ])
AC_CONFIG_FILES([ src/Makefile ])
AC_OUTPUT
# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
# And if so, warn when they don't match
if test "$kde_libs_prefix" != "$given_prefix"; then
# And if kde doesn't know about the prefix yet
echo ":"`tde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
if test $? -ne 0; then
echo ""
echo "Warning: you chose to install this package in $given_prefix,"
echo "but KDE was found in $kde_libs_prefix."
echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix"
echo "Then restart KDE."
echo ""
fi
fi
fi
if test "$all_tests" = "bad"; then
if test ! "$cache_file" = "/dev/null"; then
echo ""
echo "Please remove the file $cache_file after changing your setup"
echo "so that configure will find the changes next time."
echo ""
fi
else
echo ""
echo "Good - your configure finished. Start make now"
echo ""
fi

6
configure.in.in
Unescape View File

@ -1,6 +0,0 @@
#MIN_CONFIG(3.2.0)
AM_INIT_AUTOMAKE(kommando, 0.1)
AC_C_BIGENDIAN
AC_CHECK_KDEMAXPATHLEN

6
doc/Makefile.am
Unescape View File

@ -1,6 +0,0 @@
# the SUBDIRS is filled automatically by am_edit. If files are
# in this directory they are installed into the english dir
KDE_LANG = en
KDE_DOCS = kommando
SUBDIRS = $(AUTODIRS)

713
doc/Makefile.in
Unescape View File

@ -1,713 +0,0 @@
# Makefile.in generated by automake 1.9.6 from Makefile.am.
# KDE tags expanded automatically by am_edit - $Revision: 1.416 $
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# the SUBDIRS is filled automatically by am_edit. If files are
# in this directory they are installed into the english dir
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
#>- html-recursive info-recursive install-data-recursive \
#>- install-exec-recursive install-info-recursive \
#>- install-recursive installcheck-recursive installdirs-recursive \
#>- pdf-recursive ps-recursive uninstall-info-recursive \
#>- uninstall-recursive
#>+ 6
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-exec-recursive install-info-recursive \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive nmcheck-recursive bcheck-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
#>+ 1
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARTSCCONFIG = @ARTSCCONFIG@
AUTOCONF = @AUTOCONF@
AUTODIRS = @AUTODIRS@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CONF_FILES = @CONF_FILES@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DCOPIDL = @DCOPIDL@
DCOPIDL2CPP = @DCOPIDL2CPP@
DCOPIDLNG = @DCOPIDLNG@
DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@
EXEEXT = @EXEEXT@
F77 = @F77@
FFLAGS = @FFLAGS@
FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@
GMSGFMT = @GMSGFMT@
HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@
KCONFIG_COMPILER = @KCONFIG_COMPILER@
KDECONFIG = @KDECONFIG@
KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
KDE_INCLUDES = @KDE_INCLUDES@
KDE_LDFLAGS = @KDE_LDFLAGS@
KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@
KDE_MT_LIBS = @KDE_MT_LIBS@
KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@
KDE_PLUGIN = @KDE_PLUGIN@
KDE_RPATH = @KDE_RPATH@
KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@
KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@
KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@
LDFLAGS = @LDFLAGS@
LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@
LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@
LIBCOMPAT = @LIBCOMPAT@
LIBCRYPT = @LIBCRYPT@
LIBDL = @LIBDL@
LIBJPEG = @LIBJPEG@
LIBOBJS = @LIBOBJS@
LIBPNG = @LIBPNG@
LIBPTHREAD = @LIBPTHREAD@
LIBRESOLV = @LIBRESOLV@
LIBS = @LIBS@
LIBSM = @LIBSM@
LIBSOCKET = @LIBSOCKET@
LIBTOOL = @LIBTOOL@
LIBUCB = @LIBUCB@
LIBUTIL = @LIBUTIL@
LIBZ = @LIBZ@
LIB_KAB = @LIB_KAB@
LIB_KABC = @LIB_KABC@
LIB_TDECORE = @LIB_TDECORE@
LIB_TDEPIM = @LIB_TDEPIM@
LIB_TDEPRINT = @LIB_TDEPRINT@
LIB_TDEUI = @LIB_TDEUI@
LIB_TDEDNSSD = @LIB_TDEDNSSD@
LIB_KFILE = @LIB_KFILE@
LIB_KFM = @LIB_KFM@
LIB_TDEHTML = @LIB_TDEHTML@
LIB_TDEIMPROXY = @LIB_TDEIMPROXY@
LIB_TDEIO = @LIB_TDEIO@
LIB_KJS = @LIB_KJS@
LIB_KNEWSTUFF = @LIB_KNEWSTUFF@
LIB_TDEPARTS = @LIB_TDEPARTS@
LIB_TDESPELL = @LIB_TDESPELL@
LIB_TDESYCOCA = @LIB_TDESYCOCA@
LIB_TDEUTILS = @LIB_TDEUTILS@
LIB_POLL = @LIB_POLL@
LIB_QPE = @LIB_QPE@
LIB_QT = @LIB_QT@
LIB_SMB = @LIB_SMB@
LIB_X11 = @LIB_X11@
LIB_XEXT = @LIB_XEXT@
LIB_XRENDER = @LIB_XRENDER@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKETDEWIDGETS = @MAKETDEWIDGETS@
MCOPIDL = @MCOPIDL@
MEINPROC = @MEINPROC@
MOC = @MOC@
MSGFMT = @MSGFMT@
NOOPT_CFLAGS = @NOOPT_CFLAGS@
NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
QTE_NORTTI = @QTE_NORTTI@
QT_INCLUDES = @QT_INCLUDES@
QT_LDFLAGS = @QT_LDFLAGS@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TOPSUBDIRS = @TOPSUBDIRS@
UIC = @UIC@
UIC_TR = @UIC_TR@
USER_INCLUDES = @USER_INCLUDES@
USER_LDFLAGS = @USER_LDFLAGS@
USE_EXCEPTIONS = @USE_EXCEPTIONS@
USE_RTTI = @USE_RTTI@
USE_THREADS = @USE_THREADS@
VERSION = @VERSION@
WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@
XGETTEXT = @XGETTEXT@
XMLLINT = @XMLLINT@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_INCLUDES = @X_INCLUDES@
X_LDFLAGS = @X_LDFLAGS@
X_PRE_LIBS = @X_PRE_LIBS@
X_RPATH = @X_RPATH@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
all_includes = @all_includes@
all_libraries = @all_libraries@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
include_ARTS_FALSE = @include_ARTS_FALSE@
include_ARTS_TRUE = @include_ARTS_TRUE@
include_x11_FALSE = @include_x11_FALSE@
include_x11_TRUE = @include_x11_TRUE@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
kde_appsdir = @kde_appsdir@
kde_bindir = @kde_bindir@
kde_confdir = @kde_confdir@
kde_datadir = @kde_datadir@
kde_htmldir = @kde_htmldir@
kde_icondir = @kde_icondir@
kde_includes = @kde_includes@
kde_kcfgdir = @kde_kcfgdir@
kde_libraries = @kde_libraries@
kde_libs_htmldir = @kde_libs_htmldir@
kde_libs_prefix = @kde_libs_prefix@
kde_locale = @kde_locale@
kde_mimedir = @kde_mimedir@
kde_moduledir = @kde_moduledir@
kde_qtver = @kde_qtver@
kde_servicesdir = @kde_servicesdir@
kde_servicetypesdir = @kde_servicetypesdir@
kde_sounddir = @kde_sounddir@
kde_styledir = @kde_styledir@
kde_templatesdir = @kde_templatesdir@
kde_wallpaperdir = @kde_wallpaperdir@
kde_widgetdir = @kde_widgetdir@
tdeinitdir = @tdeinitdir@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
qt_includes = @qt_includes@
qt_libraries = @qt_libraries@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
unsermake_enable_pch_FALSE = @unsermake_enable_pch_FALSE@
unsermake_enable_pch_TRUE = @unsermake_enable_pch_TRUE@
x_includes = @x_includes@
x_libraries = @x_libraries@
xdg_appsdir = @xdg_appsdir@
xdg_directorydir = @xdg_directorydir@
xdg_menudir = @xdg_menudir@
KDE_LANG = en
KDE_DOCS = kommando
#>- SUBDIRS = $(AUTODIRS)
#>+ 1
SUBDIRS =. en
#>- all: all-recursive
#>+ 1
all: docs-am all-recursive
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
#>- @for dep in $?; do \
#>- case '$(am__configure_deps)' in \
#>- *$$dep*) \
#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
#>- && exit 0; \
#>- exit 1;; \
#>- esac; \
#>- done; \
#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
#>- cd $(top_srcdir) && \
#>- $(AUTOMAKE) --gnu doc/Makefile
#>+ 12
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/Makefile
cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(mkdir_p) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
#>- clean: clean-recursive
#>+ 1
clean: kde-rpo-clean clean-recursive
#>- clean-am: clean-generic clean-libtool mostlyclean-am
#>+ 1
clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
info: info-recursive
info-am:
install-data-am:
install-exec-am:
install-info: install-info-recursive
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-info-am
uninstall-info: uninstall-info-recursive
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
clean clean-generic clean-libtool clean-recursive ctags \
ctags-recursive distclean distclean-generic distclean-libtool \
distclean-recursive distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic maintainer-clean-recursive \
mostlyclean mostlyclean-generic mostlyclean-libtool \
mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
uninstall uninstall-am uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
#>+ 2
KDE_DIST=Makefile.in Makefile.am
#>+ 2
docs-am:
#>+ 15
force-reedit:
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/Makefile
cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in
#>+ 21
clean-bcheck:
rm -f *.bchecktest.cc *.bchecktest.cc.class a.out
bcheck: bcheck-recursive
bcheck-am:
@for i in ; do \
if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
echo "$$i"; \
if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \
rm -f $$i.bchecktest.cc; exit 1; \
fi ; \
echo "" >> $$i.bchecktest.cc.class; \
perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
rm -f a.out; \
fi ; \
done
#>+ 3
final:
$(MAKE) all-am
#>+ 3
final-install:
$(MAKE) install-am
#>+ 3
no-final:
$(MAKE) all-am
#>+ 3
no-final-install:
$(MAKE) install-am
#>+ 3
cvs-clean:
$(MAKE) admindir=$(top_srcdir)/admin -f $(top_srcdir)/admin/Makefile.common cvs-clean
#>+ 3
kde-rpo-clean:
-rm -f *.rpo
#>+ 3
nmcheck:
nmcheck-am: nmcheck

2
doc/en/Makefile.am
Unescape View File

@ -1,2 +0,0 @@
KDE_DOCS = kommando
KDE_LANG = en

591
doc/en/Makefile.in
Unescape View File

@ -1,591 +0,0 @@
# Makefile.in generated by automake 1.9.6 from Makefile.am.
# KDE tags expanded automatically by am_edit - $Revision: 1.416 $
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = doc/en
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
#>+ 1
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARTSCCONFIG = @ARTSCCONFIG@
AUTOCONF = @AUTOCONF@
AUTODIRS = @AUTODIRS@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CONF_FILES = @CONF_FILES@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DCOPIDL = @DCOPIDL@
DCOPIDL2CPP = @DCOPIDL2CPP@
DCOPIDLNG = @DCOPIDLNG@
DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@
EXEEXT = @EXEEXT@
F77 = @F77@
FFLAGS = @FFLAGS@
FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@
GMSGFMT = @GMSGFMT@
HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@
KCONFIG_COMPILER = @KCONFIG_COMPILER@
KDECONFIG = @KDECONFIG@
KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
KDE_INCLUDES = @KDE_INCLUDES@
KDE_LDFLAGS = @KDE_LDFLAGS@
KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@
KDE_MT_LIBS = @KDE_MT_LIBS@
KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@
KDE_PLUGIN = @KDE_PLUGIN@
KDE_RPATH = @KDE_RPATH@
KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@
KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@
KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@
LDFLAGS = @LDFLAGS@
LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@
LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@
LIBCOMPAT = @LIBCOMPAT@
LIBCRYPT = @LIBCRYPT@
LIBDL = @LIBDL@
LIBJPEG = @LIBJPEG@
LIBOBJS = @LIBOBJS@
LIBPNG = @LIBPNG@
LIBPTHREAD = @LIBPTHREAD@
LIBRESOLV = @LIBRESOLV@
LIBS = @LIBS@
LIBSM = @LIBSM@
LIBSOCKET = @LIBSOCKET@
LIBTOOL = @LIBTOOL@
LIBUCB = @LIBUCB@
LIBUTIL = @LIBUTIL@
LIBZ = @LIBZ@
LIB_KAB = @LIB_KAB@
LIB_KABC = @LIB_KABC@
LIB_TDECORE = @LIB_TDECORE@
LIB_TDEPIM = @LIB_TDEPIM@
LIB_TDEPRINT = @LIB_TDEPRINT@
LIB_TDEUI = @LIB_TDEUI@
LIB_TDEDNSSD = @LIB_TDEDNSSD@
LIB_KFILE = @LIB_KFILE@
LIB_KFM = @LIB_KFM@
LIB_TDEHTML = @LIB_TDEHTML@
LIB_TDEIMPROXY = @LIB_TDEIMPROXY@
LIB_TDEIO = @LIB_TDEIO@
LIB_KJS = @LIB_KJS@
LIB_KNEWSTUFF = @LIB_KNEWSTUFF@
LIB_TDEPARTS = @LIB_TDEPARTS@
LIB_TDESPELL = @LIB_TDESPELL@
LIB_TDESYCOCA = @LIB_TDESYCOCA@
LIB_TDEUTILS = @LIB_TDEUTILS@
LIB_POLL = @LIB_POLL@
LIB_QPE = @LIB_QPE@
LIB_QT = @LIB_QT@
LIB_SMB = @LIB_SMB@
LIB_X11 = @LIB_X11@
LIB_XEXT = @LIB_XEXT@
LIB_XRENDER = @LIB_XRENDER@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKETDEWIDGETS = @MAKETDEWIDGETS@
MCOPIDL = @MCOPIDL@
MEINPROC = @MEINPROC@
MOC = @MOC@
MSGFMT = @MSGFMT@
NOOPT_CFLAGS = @NOOPT_CFLAGS@
NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
QTE_NORTTI = @QTE_NORTTI@
QT_INCLUDES = @QT_INCLUDES@
QT_LDFLAGS = @QT_LDFLAGS@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TOPSUBDIRS = @TOPSUBDIRS@
UIC = @UIC@
UIC_TR = @UIC_TR@
USER_INCLUDES = @USER_INCLUDES@
USER_LDFLAGS = @USER_LDFLAGS@
USE_EXCEPTIONS = @USE_EXCEPTIONS@
USE_RTTI = @USE_RTTI@
USE_THREADS = @USE_THREADS@
VERSION = @VERSION@
WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@
XGETTEXT = @XGETTEXT@
XMLLINT = @XMLLINT@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_INCLUDES = @X_INCLUDES@
X_LDFLAGS = @X_LDFLAGS@
X_PRE_LIBS = @X_PRE_LIBS@
X_RPATH = @X_RPATH@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
all_includes = @all_includes@
all_libraries = @all_libraries@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
include_ARTS_FALSE = @include_ARTS_FALSE@
include_ARTS_TRUE = @include_ARTS_TRUE@
include_x11_FALSE = @include_x11_FALSE@
include_x11_TRUE = @include_x11_TRUE@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
kde_appsdir = @kde_appsdir@
kde_bindir = @kde_bindir@
kde_confdir = @kde_confdir@
kde_datadir = @kde_datadir@
kde_htmldir = @kde_htmldir@
kde_icondir = @kde_icondir@
kde_includes = @kde_includes@
kde_kcfgdir = @kde_kcfgdir@
kde_libraries = @kde_libraries@
kde_libs_htmldir = @kde_libs_htmldir@
kde_libs_prefix = @kde_libs_prefix@
kde_locale = @kde_locale@
kde_mimedir = @kde_mimedir@
kde_moduledir = @kde_moduledir@
kde_qtver = @kde_qtver@
kde_servicesdir = @kde_servicesdir@
kde_servicetypesdir = @kde_servicetypesdir@
kde_sounddir = @kde_sounddir@
kde_styledir = @kde_styledir@
kde_templatesdir = @kde_templatesdir@
kde_wallpaperdir = @kde_wallpaperdir@
kde_widgetdir = @kde_widgetdir@
tdeinitdir = @tdeinitdir@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
qt_includes = @qt_includes@
qt_libraries = @qt_libraries@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
unsermake_enable_pch_FALSE = @unsermake_enable_pch_FALSE@
unsermake_enable_pch_TRUE = @unsermake_enable_pch_TRUE@
x_includes = @x_includes@
x_libraries = @x_libraries@
xdg_appsdir = @xdg_appsdir@
xdg_directorydir = @xdg_directorydir@
xdg_menudir = @xdg_menudir@
KDE_DOCS = kommando
KDE_LANG = en
#>- all: all-am
#>+ 1
all: docs-am all-am
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
#>- @for dep in $?; do \
#>- case '$(am__configure_deps)' in \
#>- *$$dep*) \
#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
#>- && exit 0; \
#>- exit 1;; \
#>- esac; \
#>- done; \
#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/en/Makefile'; \
#>- cd $(top_srcdir) && \
#>- $(AUTOMAKE) --gnu doc/en/Makefile
#>+ 12
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/en/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/en/Makefile
cd $(top_srcdir) && perl admin/am_edit doc/en/Makefile.in
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
tags: TAGS
TAGS:
ctags: CTAGS
CTAGS:
#>- distdir: $(DISTFILES)
#>+ 1
distdir: distdir-nls $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
#>- uninstall: uninstall-am
#>+ 1
uninstall: uninstall-docs uninstall-nls uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
#>- clean: clean-am
#>+ 1
clean: kde-rpo-clean clean-am
#>- clean-am: clean-generic clean-libtool mostlyclean-am
#>+ 1
clean-am: clean-docs clean-bcheck clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool
dvi: dvi-am
dvi-am:
html: html-am
info: info-am
info-am:
#>- install-data-am:
#>+ 1
install-data-am: install-docs install-nls
install-exec-am:
install-info: install-info-am
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-info-am
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
distclean distclean-generic distclean-libtool distdir dvi \
dvi-am html html-am info info-am install install-am \
install-data install-data-am install-exec install-exec-am \
install-info install-info-am install-man install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
#>+ 2
KDE_DIST=Makefile.in index.docbook Makefile.am
#>+ 24
index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) index.docbook
@if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi
docs-am: index.cache.bz2
install-docs: docs-am install-nls
$(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kommando
@if test -f index.cache.bz2; then \
echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kommando/; \
$(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kommando/; \
elif test -f $(srcdir)/index.cache.bz2; then \
echo $(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kommando/; \
$(INSTALL_DATA) $(srcdir)/index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kommando/; \
fi
-rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kommando/common
$(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kommando/common
uninstall-docs:
-rm -rf $(kde_htmldir)/$(KDE_LANG)/kommando
clean-docs:
-rm -f index.cache.bz2
#>+ 13
install-nls:
$(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kommando
@for base in index.docbook ; do \
echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kommando/$$base ;\
$(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kommando/$$base ;\
done
uninstall-nls:
for base in index.docbook ; do \
rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kommando/$$base ;\
done
#>+ 5
distdir-nls:
for file in index.docbook ; do \
cp $(srcdir)/$$file $(distdir); \
done
#>+ 15
force-reedit:
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/en/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/en/Makefile
cd $(top_srcdir) && perl admin/am_edit doc/en/Makefile.in
#>+ 21
clean-bcheck:
rm -f *.bchecktest.cc *.bchecktest.cc.class a.out
bcheck: bcheck-am
bcheck-am:
@for i in ; do \
if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
echo "$$i"; \
if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \
rm -f $$i.bchecktest.cc; exit 1; \
fi ; \
echo "" >> $$i.bchecktest.cc.class; \
perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
rm -f a.out; \
fi ; \
done
#>+ 3
final:
$(MAKE) all-am
#>+ 3
final-install:
$(MAKE) install-am
#>+ 3
no-final:
$(MAKE) all-am
#>+ 3
no-final-install:
$(MAKE) install-am
#>+ 3
cvs-clean:
$(MAKE) admindir=$(top_srcdir)/admin -f $(top_srcdir)/admin/Makefile.common cvs-clean
#>+ 3
kde-rpo-clean:
-rm -f *.rpo
#>+ 3
nmcheck:
nmcheck-am: nmcheck

1
po/Makefile.am
Unescape View File

@ -1 +0,0 @@
POFILES = AUTO

542
po/Makefile.in
Unescape View File

@ -1,542 +0,0 @@
# Makefile.in generated by automake 1.9.6 from Makefile.am.
# KDE tags expanded automatically by am_edit - $Revision: 1.416 $
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = po
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
#>+ 1
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARTSCCONFIG = @ARTSCCONFIG@
AUTOCONF = @AUTOCONF@
AUTODIRS = @AUTODIRS@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CONF_FILES = @CONF_FILES@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DCOPIDL = @DCOPIDL@
DCOPIDL2CPP = @DCOPIDL2CPP@
DCOPIDLNG = @DCOPIDLNG@
DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@
EXEEXT = @EXEEXT@
F77 = @F77@
FFLAGS = @FFLAGS@
FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@
GMSGFMT = @GMSGFMT@
HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@
KCONFIG_COMPILER = @KCONFIG_COMPILER@
KDECONFIG = @KDECONFIG@
KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
KDE_INCLUDES = @KDE_INCLUDES@
KDE_LDFLAGS = @KDE_LDFLAGS@
KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@
KDE_MT_LIBS = @KDE_MT_LIBS@
KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@
KDE_PLUGIN = @KDE_PLUGIN@
KDE_RPATH = @KDE_RPATH@
KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@
KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@
KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@
LDFLAGS = @LDFLAGS@
LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@
LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@
LIBCOMPAT = @LIBCOMPAT@
LIBCRYPT = @LIBCRYPT@
LIBDL = @LIBDL@
LIBJPEG = @LIBJPEG@
LIBOBJS = @LIBOBJS@
LIBPNG = @LIBPNG@
LIBPTHREAD = @LIBPTHREAD@
LIBRESOLV = @LIBRESOLV@
LIBS = @LIBS@
LIBSM = @LIBSM@
LIBSOCKET = @LIBSOCKET@
LIBTOOL = @LIBTOOL@
LIBUCB = @LIBUCB@
LIBUTIL = @LIBUTIL@
LIBZ = @LIBZ@
LIB_KAB = @LIB_KAB@
LIB_KABC = @LIB_KABC@
LIB_TDECORE = @LIB_TDECORE@
LIB_TDEPIM = @LIB_TDEPIM@
LIB_TDEPRINT = @LIB_TDEPRINT@
LIB_TDEUI = @LIB_TDEUI@
LIB_TDEDNSSD = @LIB_TDEDNSSD@
LIB_KFILE = @LIB_KFILE@
LIB_KFM = @LIB_KFM@
LIB_TDEHTML = @LIB_TDEHTML@
LIB_TDEIMPROXY = @LIB_TDEIMPROXY@
LIB_TDEIO = @LIB_TDEIO@
LIB_KJS = @LIB_KJS@
LIB_KNEWSTUFF = @LIB_KNEWSTUFF@
LIB_TDEPARTS = @LIB_TDEPARTS@
LIB_TDESPELL = @LIB_TDESPELL@
LIB_TDESYCOCA = @LIB_TDESYCOCA@
LIB_TDEUTILS = @LIB_TDEUTILS@
LIB_POLL = @LIB_POLL@
LIB_QPE = @LIB_QPE@
LIB_QT = @LIB_QT@
LIB_SMB = @LIB_SMB@
LIB_X11 = @LIB_X11@
LIB_XEXT = @LIB_XEXT@
LIB_XRENDER = @LIB_XRENDER@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKETDEWIDGETS = @MAKETDEWIDGETS@
MCOPIDL = @MCOPIDL@
MEINPROC = @MEINPROC@
MOC = @MOC@
MSGFMT = @MSGFMT@
NOOPT_CFLAGS = @NOOPT_CFLAGS@
NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
QTE_NORTTI = @QTE_NORTTI@
QT_INCLUDES = @QT_INCLUDES@
QT_LDFLAGS = @QT_LDFLAGS@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TOPSUBDIRS = @TOPSUBDIRS@
UIC = @UIC@
UIC_TR = @UIC_TR@
USER_INCLUDES = @USER_INCLUDES@
USER_LDFLAGS = @USER_LDFLAGS@
USE_EXCEPTIONS = @USE_EXCEPTIONS@
USE_RTTI = @USE_RTTI@
USE_THREADS = @USE_THREADS@
VERSION = @VERSION@
WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@
XGETTEXT = @XGETTEXT@
XMLLINT = @XMLLINT@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_INCLUDES = @X_INCLUDES@
X_LDFLAGS = @X_LDFLAGS@
X_PRE_LIBS = @X_PRE_LIBS@
X_RPATH = @X_RPATH@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
all_includes = @all_includes@
all_libraries = @all_libraries@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
include_ARTS_FALSE = @include_ARTS_FALSE@
include_ARTS_TRUE = @include_ARTS_TRUE@
include_x11_FALSE = @include_x11_FALSE@
include_x11_TRUE = @include_x11_TRUE@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
kde_appsdir = @kde_appsdir@
kde_bindir = @kde_bindir@
kde_confdir = @kde_confdir@
kde_datadir = @kde_datadir@
kde_htmldir = @kde_htmldir@
kde_icondir = @kde_icondir@
kde_includes = @kde_includes@
kde_kcfgdir = @kde_kcfgdir@
kde_libraries = @kde_libraries@
kde_libs_htmldir = @kde_libs_htmldir@
kde_libs_prefix = @kde_libs_prefix@
kde_locale = @kde_locale@
kde_mimedir = @kde_mimedir@
kde_moduledir = @kde_moduledir@
kde_qtver = @kde_qtver@
kde_servicesdir = @kde_servicesdir@
kde_servicetypesdir = @kde_servicetypesdir@
kde_sounddir = @kde_sounddir@
kde_styledir = @kde_styledir@
kde_templatesdir = @kde_templatesdir@
kde_wallpaperdir = @kde_wallpaperdir@
kde_widgetdir = @kde_widgetdir@
tdeinitdir = @tdeinitdir@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
qt_includes = @qt_includes@
qt_libraries = @qt_libraries@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
unsermake_enable_pch_FALSE = @unsermake_enable_pch_FALSE@
unsermake_enable_pch_TRUE = @unsermake_enable_pch_TRUE@
x_includes = @x_includes@
x_libraries = @x_libraries@
xdg_appsdir = @xdg_appsdir@
xdg_directorydir = @xdg_directorydir@
xdg_menudir = @xdg_menudir@
POFILES = AUTO
#>- all: all-am
#>+ 1
all: docs-am all-am
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
#>- @for dep in $?; do \
#>- case '$(am__configure_deps)' in \
#>- *$$dep*) \
#>- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
#>- && exit 0; \
#>- exit 1;; \
#>- esac; \
#>- done; \
#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/Makefile'; \
#>- cd $(top_srcdir) && \
#>- $(AUTOMAKE) --gnu po/Makefile
#>+ 12
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu po/Makefile
cd $(top_srcdir) && perl admin/am_edit po/Makefile.in
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
tags: TAGS
TAGS:
ctags: CTAGS
CTAGS:
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
#>- clean: clean-am
#>+ 1
clean: kde-rpo-clean clean-am
#>- clean-am: clean-generic clean-libtool mostlyclean-am
#>+ 1
clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool
dvi: dvi-am
dvi-am:
html: html-am
info: info-am
info-am:
install-data-am:
install-exec-am:
install-info: install-info-am
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-info-am
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
distclean distclean-generic distclean-libtool distdir dvi \
dvi-am html html-am info info-am install install-am \
install-data install-data-am install-exec install-exec-am \
install-info install-info-am install-man install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
#>+ 2
KDE_DIST=Makefile.in Makefile.am
#>+ 2
docs-am:
#>+ 15
force-reedit:
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu po/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu po/Makefile
cd $(top_srcdir) && perl admin/am_edit po/Makefile.in
#>+ 21
clean-bcheck:
rm -f *.bchecktest.cc *.bchecktest.cc.class a.out
bcheck: bcheck-am
bcheck-am:
@for i in ; do \
if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
echo "$$i"; \
if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \
rm -f $$i.bchecktest.cc; exit 1; \
fi ; \
echo "" >> $$i.bchecktest.cc.class; \
perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
rm -f a.out; \
fi ; \
done
#>+ 3
final:
$(MAKE) all-am
#>+ 3
final-install:
$(MAKE) install-am
#>+ 3
no-final:
$(MAKE) all-am
#>+ 3
no-final-install:
$(MAKE) install-am
#>+ 3
cvs-clean:
$(MAKE) admindir=$(top_srcdir)/admin -f $(top_srcdir)/admin/Makefile.common cvs-clean
#>+ 3
kde-rpo-clean:
-rm -f *.rpo
#>+ 3
nmcheck:
nmcheck-am: nmcheck

50
src/Makefile.am
Unescape View File

@ -1,50 +0,0 @@
# set the include path for X, qt and KDE
INCLUDES = $(all_includes)
# these are the headers for your project
noinst_HEADERS = kommando.h roundbutton.h commandobutton.h menu.h \
configdialogimpl.h menulistviewitem.h configuration.h servicemenu.h kommandoview.h \
kommandod.h kcmkommando.h
# let automoc handle all of the meta source files (moc)
METASOURCES = AUTO
messages: rc.cpp
$(EXTRACTRC) `find . -name \*.ui -o -name \*.rc` > rc.cpp
$(XGETTEXT) *.cpp -o $(podir)/kommando.pot
KDE_ICON = AUTO
#########################################################################
# SHARED LIBRARY
#########################################################################
lib_LTLIBRARIES = libkommando.la
libkommando_la_SOURCES = menulistviewitem.cpp configuration.cpp menu.cpp \
commandobutton.cpp roundbutton.cpp kommandoview.cpp
libkommando_la_LDFLAGS = -version-info 1:0:0 $(all_libraries)
libkommando_la_LIBADD = $(LIB_TDECORE)
#########################################################################
# KDE MODULES SECTION
#########################################################################
# this is the library that gets installed. it's name is used for all
# of the other Makefile.am variables
kde_module_LTLIBRARIES = kded_kommandod.la kcm_kommando.la
kded_kommandod_la_SOURCES = kommandod.cpp kommandod.skel kommando.cpp
kded_kommandod_la_METASOURCES = AUTO
kded_kommandod_la_LDFLAGS = -avoid-version -module $(all_libraries)
kded_kommandod_la_LIBADD = -lXmu libkommando.la $(LIB_TDECORE)
servicesdir = $(kde_servicesdir)/kded
services_DATA = kommandod.desktop
kcm_kommando_la_LDFLAGS = -avoid-version -module -no-undefined $(all_libraries)
kcm_kommando_la_SOURCES = configdialogimpl.cpp configdialog.ui \
kcmkommando.cpp servicemenu.cpp
kcm_kommando_la_LIBADD = libkommando.la -lXmu $(LIB_TDEIO) $(LIB_TDEUI) \
$(LIB_TDECORE)
# this is where the desktop file will go
xdg_apps_DATA = kommando.desktop

1056
src/Makefile.in
View File

File diff suppressed because it is too large Load Diff

0
stamp-h.in
Unescape View File

4
subdirs
Unescape View File

@ -1,4 +0,0 @@
admin
doc
po
src
Write Preview
Loading…
Cancel
Save