tde-i18n/tde-i18n-hi/messages/tdelibs/cupsdconf.po

# translation of cupsdconf.po to Hindi
# Copyright (C) 2004 Free Software Foundation, Inc.
# G Karunakar <karunakar@freedomink.org>, 2004.
# Ravishankar Shrivastava <raviratlami@yahoo.com>, 2004.
# Ravishankar Shrivastava <raviratlami@gmail.com>, 2004.
#
msgid ""
msgstr ""
"Project-Id-Version: cupsdconf\n"
"POT-Creation-Date: 2021-07-07 18:16+0000\n"
"PO-Revision-Date: 2005-02-21 11:36+0530\n"
"Last-Translator: Ravishankar Shrivastava <raviratlami@gmail.com>\n"
"Language-Team: Hindi <indlinux-hindi@lists.sourceforge.net>\n"
"Language: hi\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.3.1\n"

#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr ""

#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr ""

#: addressdialog.cpp:30
msgid "ACL Address"
msgstr "एसीएल पता"

#: addressdialog.cpp:36 browsedialog.cpp:42
msgid "Allow"
msgstr "स्वीकारें"

#: addressdialog.cpp:37 browsedialog.cpp:43
msgid "Deny"
msgstr "अस्वीकारें"

#: addressdialog.cpp:39 browsedialog.cpp:47
msgid "Type:"
msgstr "क़िस्मः"

#: addressdialog.cpp:40 portdialog.cpp:43
msgid "Address:"
msgstr "पताः"

#: browsedialog.cpp:41
msgid "Send"
msgstr "भेजें"

#: browsedialog.cpp:44
msgid "Relay"
msgstr "रिले"

#: browsedialog.cpp:45
msgid "Poll"
msgstr "पोल"

#: browsedialog.cpp:48
msgid "From:"
msgstr "सेः"

#: browsedialog.cpp:49
msgid "To:"
msgstr "को:"

#: browsedialog.cpp:62
msgid "Browse Address"
msgstr "ब्राउज़ पता"

#: cupsdbrowsingpage.cpp:37
msgid "Browsing"
msgstr "ब्राउजिंग"

#: cupsdbrowsingpage.cpp:38
msgid "Browsing Settings"
msgstr "ब्राउजिंग विन्यास "

#: cupsdbrowsingpage.cpp:44
msgid "Use browsing"
msgstr "ब्राउजिंग इस्तेमाल करें"

#: cupsdbrowsingpage.cpp:49
msgid "Implicit classes"
msgstr "अस्पस्ट वर्ग"

#: cupsdbrowsingpage.cpp:50
msgid "Hide implicit members"
msgstr "अस्पस्ट सदस्यों को छुपाएँ"

#: cupsdbrowsingpage.cpp:51
msgid "Use short names"
msgstr "छोटे नाम इस्तेमाल करें"

#: cupsdbrowsingpage.cpp:52
msgid "Use \"any\" classes"
msgstr " \"कोई-भी\" वर्ग इस्तेमाल करें"

#: cupsdbrowsingpage.cpp:54 locationdialog.cpp:66
msgid "Allow, Deny"
msgstr "स्वीकारें, अस्वीकारें"

#: cupsdbrowsingpage.cpp:55 locationdialog.cpp:67
msgid "Deny, Allow"
msgstr "अस्वीकारें, स्वीकारें"

#: cupsdbrowsingpage.cpp:61 cupsdbrowsingpage.cpp:64 cupsdnetworkpage.cpp:53
#: cupsdnetworkpage.cpp:61
msgid " sec"
msgstr "सेक."

#: cupsdbrowsingpage.cpp:66
msgid "Browse port:"
msgstr "ब्राउज़ पोर्टः"

#: cupsdbrowsingpage.cpp:67
msgid "Browse interval:"
msgstr "ब्राउज़ अंतरालः"

#: cupsdbrowsingpage.cpp:68
msgid "Browse timeout:"
msgstr "ब्राउज़ टाइम-आउटः"

#: cupsdbrowsingpage.cpp:69
msgid "Browse addresses:"
msgstr "ब्राउज़ पताः"

#: cupsdbrowsingpage.cpp:70
msgid "Browse order:"
msgstr "ब्राउज़ अनुक्रमः"

#: cupsdbrowsingpage.cpp:71
msgid "Browse options:"
msgstr "ब्राउज़ विकल्पः"

#: cupsdconf.cpp:852 cupsdconf.cpp:875 cupsdconf.cpp:891
msgid ""
"_: Base\n"
"Root"
msgstr "रूट"

#: cupsdconf.cpp:852 cupsdconf.cpp:872 cupsdconf.cpp:893
msgid "All printers"
msgstr "सभी प्रिंटर"

#: cupsdconf.cpp:852 cupsdconf.cpp:873 cupsdconf.cpp:894
msgid "All classes"
msgstr "सभी वर्ग"

#: cupsdconf.cpp:852 cupsdconf.cpp:874 cupsdconf.cpp:896
msgid "Print jobs"
msgstr "छपाई कार्य"

#: cupsdconf.cpp:853 cupsdconf.cpp:871 cupsdconf.cpp:892
msgid "Administration"
msgstr "प्रशासन"

#: cupsdconf.cpp:854 cupsdconf.cpp:881 cupsdconf.cpp:884 cupsdconf.cpp:905
msgid "Class"
msgstr "वर्ग"

#: cupsdconf.cpp:855 cupsdconf.cpp:876 cupsdconf.cpp:879 cupsdconf.cpp:899
msgid "Printer"
msgstr "प्रिंटर"

#: cupsdconf.cpp:895
msgid "Root"
msgstr "रूट"

#: cupsddialog.cpp:128
msgid "Short Help"
msgstr "मदद प्रारंभ करें"

#: cupsddialog.cpp:141
msgid "CUPS Server Configuration"
msgstr "कप्स सर्वर कॉन्फ़िगरेशन"

#: cupsddialog.cpp:188
msgid "Error while loading configuration file!"
msgstr "कॉन्फ़िगरेशन फ़ाइल लोड करने में त्रुटि!"

#: cupsddialog.cpp:188 cupsddialog.cpp:207 cupsddialog.cpp:268
#: cupsddialog.cpp:323
msgid "CUPS Configuration Error"
msgstr "कप्स कॉन्फ़िगरेशन त्रुटि"

#: cupsddialog.cpp:197
msgid ""
"Some options were not recognized by this configuration tool. They will be "
"left untouched and you won't be able to change them."
msgstr ""
"इस कॉन्फ़िगरेशन औज़ार द्वारा कुछ विकल्प पहचाने नहीं जा सके. उन्हें वैसा ही छोड़ दिया गया है "
"तथा आप उन्हें बदल नहीं पाएंगे."

#: cupsddialog.cpp:199
msgid "Unrecognized Options"
msgstr "अपरिचित विकल्प"

#: cupsddialog.cpp:219
msgid "Unable to find a running CUPS server"
msgstr "चलता हुआ कप्स सर्वर पाने में अक्षम"

#: cupsddialog.cpp:228
msgid "Unable to restart CUPS server (pid = %1)"
msgstr "कप्स सर्वर फिर से  प्रारंभ करने में अक्षम (पीआईडी = %1)"

#: cupsddialog.cpp:249
msgid ""
"Unable to retrieve configuration file from the CUPS server. You probably "
"don't have the access permissions to perform this operation."
msgstr ""
"कप्स सर्वर से कॉन्फ़िगरेशन फ़ाइल पाने में अक्षम. संभवतः आपके पास इस ऑपरेशन को चलाने के लिए "
"पहुँच अनुमतियाँ नहीं हैं."

#: cupsddialog.cpp:259
msgid "Internal error: file '%1' not readable/writable!"
msgstr "आंतरिक त्रुटि: फ़ाइल '%1' पढ़ने/लिखने योग्य नहीं है!"

#: cupsddialog.cpp:262
msgid "Internal error: empty file '%1'!"
msgstr "आंतरिक त्रुटि: फ़ाइल '%1' खाली है!"

#: cupsddialog.cpp:280
msgid ""
"The config file has not been uploaded to the CUPS server. The daemon will "
"not be restarted."
msgstr "कप्स सर्वर में कॉन्फ़िग फ़ाइल अपलोड  नहीं है. डेमन फिर से  प्रारंभ नहीं होगा."

#: cupsddialog.cpp:284
msgid ""
"Unable to upload the configuration file to CUPS server. You probably don't "
"have the access permissions to perform this operation."
msgstr ""
"कप्स सर्वर से कॉन्फ़िगरेशन फ़ाइल अपलोड करने में अक्षम. संभवतः आपके पास इस ऑपरेशन को चलाने के "
"लिए पहुँच अनुमतियाँ नहीं हैं."

#: cupsddialog.cpp:287
msgid "CUPS configuration error"
msgstr "कप्स कॉन्फ़िगरेशन त्रुटि"

#: cupsddialog.cpp:318
#, c-format
msgid "Unable to write configuration file %1"
msgstr "कॉन्फ़िगरेशन फ़ाइल %1 लिखने में अक्षम."

#: cupsddirpage.cpp:34
msgid "Folders"
msgstr "फ़ोल्डर"

#: cupsddirpage.cpp:35
msgid "Folders Settings"
msgstr "फ़ोल्डर विन्यास "

#: cupsddirpage.cpp:46
msgid "Data folder:"
msgstr "डाटा फ़ोल्डरः"

#: cupsddirpage.cpp:47
msgid "Document folder:"
msgstr "दस्तावेज़ फोल्डरः"

#: cupsddirpage.cpp:48
msgid "Font path:"
msgstr "फ़ॉन्ट पथः"

#: cupsddirpage.cpp:49
msgid "Request folder:"
msgstr "निवेदन फोल्डरः"

#: cupsddirpage.cpp:50
msgid "Server binaries:"
msgstr "सर्वर बाइनरीज़ः"

#: cupsddirpage.cpp:51
msgid "Server files:"
msgstr "सर्वर फ़ाइलें:"

#: cupsddirpage.cpp:52
msgid "Temporary files:"
msgstr "अस्थायी फ़ाइलें:"

#: cupsdfilterpage.cpp:36
msgid "Filter"
msgstr "फ़िल्टर"

#: cupsdfilterpage.cpp:37
msgid "Filter Settings"
msgstr "फ़िल्टर विन्यास"

#: cupsdfilterpage.cpp:46 cupsdjobspage.cpp:47 cupsdjobspage.cpp:49
#: cupsdjobspage.cpp:52 cupsdnetworkpage.cpp:52 cupsdnetworkpage.cpp:60
#: sizewidget.cpp:39
msgid "Unlimited"
msgstr "असीमित"

#: cupsdfilterpage.cpp:49
msgid "User:"
msgstr "उपयोक्ता:"

#: cupsdfilterpage.cpp:50
msgid "Group:"
msgstr "समूहः"

#: cupsdfilterpage.cpp:51
msgid "RIP cache:"
msgstr "रिप कैशः"

#: cupsdfilterpage.cpp:52
msgid "Filter limit:"
msgstr "फ़िल्टर सीमाः"

#: cupsdjobspage.cpp:34
msgid "Jobs"
msgstr "कार्य"

#: cupsdjobspage.cpp:35
msgid "Print Jobs Settings"
msgstr "छपाई कार्य विन्यास"

#: cupsdjobspage.cpp:38
msgid "Preserve job history"
msgstr "कार्य इतिहास सहेजें"

#: cupsdjobspage.cpp:39
msgid "Preserve job files"
msgstr "कार्य फ़ाइलें सहेजें"

#: cupsdjobspage.cpp:40
msgid "Auto purge jobs"
msgstr "कार्य स्वतः शुद्ध करें"

#: cupsdjobspage.cpp:55
msgid "Max jobs:"
msgstr "अधिकतम कार्यः"

#: cupsdjobspage.cpp:56
msgid "Max jobs per printer:"
msgstr "प्रति प्रिंटर अधिकतम कार्यः"

#: cupsdjobspage.cpp:57
msgid "Max jobs per user:"
msgstr "प्रति उपयोक्ता अधिकतम कार्यः"

#: cupsdlogpage.cpp:36
msgid "Log"
msgstr "लॉग"

#: cupsdlogpage.cpp:37
msgid "Log Settings"
msgstr "लॉग विन्यास"

#: cupsdlogpage.cpp:46
msgid "Detailed Debugging"
msgstr "विस्तृत डिबगिंग"

#: cupsdlogpage.cpp:47
msgid "Debug Information"
msgstr "डिबग जानकारी"

#: cupsdlogpage.cpp:48
msgid "General Information"
msgstr "सामान्य जानकारी"

#: cupsdlogpage.cpp:49
msgid "Warnings"
msgstr "चेतावनियाँ"

#: cupsdlogpage.cpp:50
msgid "Errors"
msgstr "त्रुटियाँ"

#: cupsdlogpage.cpp:51
msgid "No Logging"
msgstr "कोई लागिंग नहीं"

#: cupsdlogpage.cpp:58
msgid "Access log:"
msgstr "एक्सेस लागः"

#: cupsdlogpage.cpp:59
msgid "Error log:"
msgstr "त्रुटि लागः"

#: cupsdlogpage.cpp:60
msgid "Page log:"
msgstr "पृष्ठ लागः"

#: cupsdlogpage.cpp:61
msgid "Max log size:"
msgstr "अधिकतम लॉग आकार"

#: cupsdlogpage.cpp:62
msgid "Log level:"
msgstr "लॉग स्तरः"

#: cupsdnetworkpage.cpp:38
msgid "Network"
msgstr "नेटवर्क"

#: cupsdnetworkpage.cpp:39
msgid "Network Settings"
msgstr "नेटवर्क विन्यास "

#: cupsdnetworkpage.cpp:42
msgid "Keep alive"
msgstr "जीवंत बनाए रखें"

#: cupsdnetworkpage.cpp:65
msgid "Double"
msgstr "दोगुना"

#: cupsdnetworkpage.cpp:67
msgid "Hostname lookups:"
msgstr "होस्टनाम तलाशें:"

#: cupsdnetworkpage.cpp:68
msgid "Keep-alive timeout:"
msgstr "जीवंत बनाए रखें टाइम-आउटः"

#: cupsdnetworkpage.cpp:69
msgid "Max clients:"
msgstr "अधिकतम क्लाएंट्सः"

#: cupsdnetworkpage.cpp:70
msgid "Max request size:"
msgstr "अधिकतम निवेदित आकारः"

#: cupsdnetworkpage.cpp:71
msgid "Client timeout:"
msgstr "क्लाएंट टाइम-आउटः"

#: cupsdnetworkpage.cpp:72
msgid "Listen to:"
msgstr "पर सुनेः"

#: cupsdsecuritypage.cpp:38
msgid "Security"
msgstr "सुरक्षा"

#: cupsdsecuritypage.cpp:39
msgid "Security Settings"
msgstr "सुरक्षा विन्यास"

#: cupsdsecuritypage.cpp:49
msgid "Remote root user:"
msgstr "रिमोट रूट उपयोक्ताः"

#: cupsdsecuritypage.cpp:50
msgid "System group:"
msgstr "तंत्र समूहः"

#: cupsdsecuritypage.cpp:51
msgid "Encryption certificate:"
msgstr "एनक्रिप्शन प्रमाणपत्रः"

#: cupsdsecuritypage.cpp:52
msgid "Encryption key:"
msgstr "एनक्रिप्शन कुंजीः"

#: cupsdsecuritypage.cpp:53
msgid "Locations:"
msgstr "स्थानः"

#: cupsdsecuritypage.cpp:128
msgid ""
"This location is already defined. Do you want to replace the existing one?"
msgstr "स्थान पहले से ही पारिभाषित है. क्या आप मौज़ूदा को बदलना चाहेंगे?"

#: cupsdserverpage.cpp:43
msgid "Server"
msgstr "सर्वर"

#: cupsdserverpage.cpp:44
msgid "Server Settings"
msgstr "सर्वर विन्यास"

#: cupsdserverpage.cpp:55
msgid "Allow overrides"
msgstr "ओवरराइड स्वीकारें"

#: cupsdserverpage.cpp:57 locationdialog.cpp:49 locationdialog.cpp:53
msgid "None"
msgstr "कुछ नहीं"

#: cupsdserverpage.cpp:58
msgid "Classified"
msgstr "वर्गीकृत"

#: cupsdserverpage.cpp:59
msgid "Confidential"
msgstr "गोपनीय"

#: cupsdserverpage.cpp:60
msgid "Secret"
msgstr "गुप्त"

#: cupsdserverpage.cpp:61
msgid "Top Secret"
msgstr "अत्यंत गुप्त"

#: cupsdserverpage.cpp:62
msgid "Unclassified"
msgstr "अवर्गीकृत"

#: cupsdserverpage.cpp:63
msgid "Other"
msgstr "अन्य"

#: cupsdserverpage.cpp:83
msgid "Server name:"
msgstr "सर्वर नामः"

#: cupsdserverpage.cpp:84
msgid "Server administrator:"
msgstr "सर्वर प्रशासकः"

#: cupsdserverpage.cpp:85
msgid "Classification:"
msgstr "वर्गीकरणः"

#: cupsdserverpage.cpp:86
msgid "Default character set:"
msgstr "डिफ़ॉल्ट कैरेक्टर सेटः"

#: cupsdserverpage.cpp:87
msgid "Default language:"
msgstr "डिफ़ॉल्ट भाषाः"

#: cupsdserverpage.cpp:88
msgid "Printcap file:"
msgstr "प्रिंटकेप फ़ाइलः"

#: cupsdserverpage.cpp:89
msgid "Printcap format:"
msgstr "प्रिंटकेप फॉर्मेटः"

#: cupsdsplash.cpp:31
msgid "Welcome to the CUPS Server Configuration Tool"
msgstr "कप्स सर्वर कॉन्फ़िगरेशन औज़ार में आपका स्वागत है"

#: cupsdsplash.cpp:32
msgid "Welcome"
msgstr "सुस्वागतम"

#: cupsdsplash.cpp:49
msgid ""
"<p>This tool will help you to configure graphically the server of the CUPS "
"printing system. The available options are grouped into sets of related "
"topics and can be accessed quickly through the icon view located on the "
"left. Each option has a default value that is shown if it has not been "
"previously set. This default value should be OK in most cases.</p><br><p>You "
"can access a short help message for each option using either the '?' button "
"in the the title bar, or the button at the bottom of this dialog.</p>"
msgstr ""

#: editlist.cpp:33
msgid "Add..."
msgstr "जोड़ें..."

#: editlist.cpp:34
msgid "Edit..."
msgstr "संपादन..."

#: editlist.cpp:36
msgid "Default List"
msgstr "डिफ़ॉल्ट सूची"

#: locationdialog.cpp:50
msgid "Basic"
msgstr "मूल"

#: locationdialog.cpp:51
msgid "Digest"
msgstr "डाइजेस्ट"

#: locationdialog.cpp:54
msgid "User"
msgstr "उपयोक्ता"

#: locationdialog.cpp:55
msgid "System"
msgstr "तंत्र"

#: locationdialog.cpp:56
msgid "Group"
msgstr "समूह"

#: locationdialog.cpp:58
msgid "Always"
msgstr "हमेशा"

#: locationdialog.cpp:59
msgid "Never"
msgstr "कभी नहीं"

#: locationdialog.cpp:60
msgid "Required"
msgstr "आवश्यक"

#: locationdialog.cpp:61
msgid "If Requested"
msgstr "यदि निवेदित"

#: locationdialog.cpp:63
msgid "All"
msgstr "सभी"

#: locationdialog.cpp:64
msgid "Any"
msgstr "कोई भी"

#: locationdialog.cpp:72
msgid "Resource:"
msgstr "रिसोर्सः"

#: locationdialog.cpp:73
msgid "Authentication:"
msgstr "प्रमाणीकरणः"

#: locationdialog.cpp:74
msgid "Class:"
msgstr "वर्गः"

#: locationdialog.cpp:75
msgid "Names:"
msgstr "नामः"

#: locationdialog.cpp:76
msgid "Encryption:"
msgstr "एनक्रिप्शनः"

#: locationdialog.cpp:77
msgid "Satisfy:"
msgstr "संतुष्टिः"

#: locationdialog.cpp:78
msgid "ACL order:"
msgstr "एसीएल अनुक्रमः"

#: locationdialog.cpp:79
msgid "ACL addresses:"
msgstr "एसीएल पताः"

#: locationdialog.cpp:100
msgid "Location"
msgstr "स्थान"

#: main.cpp:29
msgid "Configuration file to load"
msgstr "लोड करने के लिए कॉन्फ़िगरेशन फ़ाइल"

#: main.cpp:36 main.cpp:37
msgid "A CUPS configuration tool"
msgstr "एक कप्स कॉन्फ़िगरेशन औज़ार"

#: portdialog.cpp:41
msgid "Use SSL encryption"
msgstr "एसएसएल एनक्रिप्शन इस्तेमाल करें"

#: portdialog.cpp:44
msgid "Port:"
msgstr "पोर्टः"

#: portdialog.cpp:55
msgid "Listen To"
msgstr "पर सुने"

#: sizewidget.cpp:34
msgid "KB"
msgstr "कि.बा."

#: sizewidget.cpp:35
msgid "MB"
msgstr "मे.बा."

#: sizewidget.cpp:36
msgid "GB"
msgstr "गी.बा."

#: sizewidget.cpp:37
msgid "Tiles"
msgstr "टाइलें"

#: cupsd.conf.template:23
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Server name (ServerName)</b>\n"
"<p>\n"
"The hostname of your server, as advertised to the world.\n"
"By default CUPS will use the hostname of the system.</p>\n"
"<p>\n"
"To set the default server used by clients, see the client.conf file.</p>\n"
"<p>\n"
"<i>ex</i>: myhost.domain.com</p>\n"
msgstr ""
"<b>सर्वर नाम (ServerName)</b>\n"
"<p>\n"
"आपके सर्वर का होस्ट नाम, जैसा कि विश्व को विज्ञापित किया जाता है.\n"
"डिफ़ॉल्ट द्वारा कप्स, तंत्र का होस्ट नाम उपयोग करेगा.</p>\n"
"<p>\n"
"क्लाएंट द्वारा उपयोग के लिए डिफ़ॉल्ट सर्वर नियत करने के लिए देखें client.conf फ़ाइल.</p>\n"
"<p>\n"
"<i>ex</i>: myhost.domain.com</p>\n"

#: cupsd.conf.template:36
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Server administrator (ServerAdmin)</b>\n"
"<p>\n"
"The email address to send all complaints or problems to.\n"
"By default CUPS will use \"root@hostname\".</p>\n"
"<p>\n"
"<i>ex</i>: root@myhost.com</p>\n"
msgstr ""
"<b>सर्वर एडमिनिस्ट्रेटर (ServerAdmin)</b>\n"
"<p>\n"
"सभी शिकायतों तथा समस्याओं को प्रेषित करने के लिए ई-मेल पता.\n"
"डिफ़ॉल्ट द्वारा कप्स उपयोग करेगाः \"root@hostname\".</p>\n"
"<p>\n"
"<i>ex</i>: root@myhost.com</p>\n"

#: cupsd.conf.template:47
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Access log (AccessLog)</b>\n"
"<p>\n"
"The access log file; if this does not start with a leading /\n"
"then it is assumed to be relative to ServerRoot.  By default set to\n"
"\"/var/log/cups/access_log\".</p>\n"
"<p>\n"
"You can also use the special name <b>syslog</b> to send the output to the\n"
"syslog file or daemon.</p>\n"
"<p>\n"
"<i>ex</i>: /var/log/cups/access_log</p>\n"
msgstr ""
"<b>अस्थायी फ़ाइलें (TempDir)</b>\n"
"<p>\n"
"The directory to put temporary files in. This directory must be\n"
"writable by the user defined above!  Defaults to \"/var/spool/cups/tmp\" or\n"
"the value of the TMPDIR environment variable.</p>\n"
"<p>\n"
"<i>ex</i>: /var/spool/cups/tmp</p>\n"

#: cupsd.conf.template:62
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Data directory (DataDir)</b>\n"
"<p>\n"
"The root directory for the CUPS data files.\n"
"By default /usr/share/cups.</p>\n"
"<p>\n"
"<i>ex</i>: /usr/share/cups</p>\n"
msgstr ""
"<b>डाटा डिरेक्ट्री (DataDir)</b>\n"
"<p>\n"
"कप्स डाटा फ़ाइल के लिए रूट डिरेक्ट्री.\n"
"डिफ़ॉल्ट है- /usr/share/cups.</p>\n"
"<p>\n"
"<i>ex</i>: /usr/share/cups</p>\n"

#: cupsd.conf.template:73
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Default character set (DefaultCharset)</b>\n"
"<p>\n"
"The default character set to use. If not specified,\n"
"defaults to utf-8.  Note that this can also be overridden in\n"
"HTML documents...</p>\n"
"<p>\n"
"<i>ex</i>: utf-8</p>\n"
msgstr ""
"<b>डिफ़ॉल्ट भाषा (DefaultLanguage)</b>\n"
"<p>\n"
"ब्राउज़र द्वारा उल्लेखित डिफ़ॉल्ट भाषा.\n"
"यदि उल्लेखित नहीं होगा तो मौज़ूदा लोकेल उपयोग करेगा.</p>\n"
"<p>\n"
"<i>ex</i>: en</p>\n"

#: cupsd.conf.template:85
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Default language (DefaultLanguage)</b>\n"
"<p>\n"
"The default language if not specified by the browser.\n"
"If not specified, the current locale is used.</p>\n"
"<p>\n"
"<i>ex</i>: en</p>\n"
msgstr ""
"<b>डिफ़ॉल्ट भाषा (DefaultLanguage)</b>\n"
"<p>\n"
"ब्राउज़र द्वारा उल्लेखित डिफ़ॉल्ट भाषा.\n"
"यदि उल्लेखित नहीं होगा तो मौज़ूदा लोकेल उपयोग करेगा.</p>\n"
"<p>\n"
"<i>ex</i>: en</p>\n"

#: cupsd.conf.template:96
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Document directory (DocumentRoot)</b>\n"
"<p>\n"
"The root directory for HTTP documents that are served.\n"
"By default the compiled-in directory.</p>\n"
"<p>\n"
"<i>ex</i>: /usr/share/cups/doc-root</p>\n"
msgstr ""
"<b>डाटा डिरेक्ट्री (DataDir)</b>\n"
"<p>\n"
"कप्स डाटा फ़ाइल के लिए रूट डिरेक्ट्री.\n"
"डिफ़ॉल्ट है- /usr/share/cups.</p>\n"
"<p>\n"
"<i>ex</i>: /usr/share/cups</p>\n"

#: cupsd.conf.template:107
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Error log (ErrorLog)</b>\n"
"<p>\n"
"The error log file; if this does not start with a leading /\n"
"then it is assumed to be relative to ServerRoot.  By default set to\n"
"\"/var/log/cups/error_log\".</p>\n"
"<p>\n"
"You can also use the special name <b>syslog</b> to send the output to the\n"
"syslog file or daemon.</p>\n"
"<p>\n"
"<i>ex</i>: /var/log/cups/error_log</p>\n"
msgstr ""
"<b>अस्थायी फ़ाइलें (TempDir)</b>\n"
"<p>\n"
"The directory to put temporary files in. This directory must be\n"
"writable by the user defined above!  Defaults to \"/var/spool/cups/tmp\" or\n"
"the value of the TMPDIR environment variable.</p>\n"
"<p>\n"
"<i>ex</i>: /var/spool/cups/tmp</p>\n"

#: cupsd.conf.template:122
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Font path (FontPath)</b>\n"
"<p>\n"
"The path to locate all font files (currently only for pstoraster).\n"
"By default /usr/share/cups/fonts.</p>\n"
"<p>\n"
"<i>ex</i>: /usr/share/cups/fonts</p>\n"
msgstr ""
"<b>फ़ॉन्ट पथ (FontPath)</b>\n"
"<p>\n"
"सभी फ़ॉन्ट फ़ाइलों को निर्धारित करने का पथ (currently only for pstoraster).\n"
"By default /usr/share/cups/fonts.</p>\n"
"<p>\n"
"<i>ex</i>: /usr/share/cups/fonts</p>\n"

#: cupsd.conf.template:133
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Log level (LogLevel)</b>\n"
"<p>\n"
"Controls the number of messages logged to the ErrorLog\n"
"file and can be one of the following:</p>\n"
"<ul type=circle>\n"
"<li><i>debug2</i>:     Log everything.</li>\n"
"<li><i>debug</i>:     Log almost everything.</li>\n"
"<li><i>info</i>:      Log all requests and state changes.</li>\n"
"<li><i>warn</i>:      Log errors and warnings.</li>\n"
"<li><i>error</i>:     Log only errors.</li>\n"
"<li><i>none</i>:      Log nothing.</li>\n"
"</ul><p>\n"
"<i>ex</i>: info</p>\n"
msgstr ""

#: cupsd.conf.template:151
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Max log size (MaxLogSize)</b>\n"
"<p>\n"
"Controls the maximum size of each log file before they are\n"
"rotated.  Defaults to 1048576 (1MB).  Set to 0 to disable log rotating.</p>\n"
"<p>\n"
"<i>ex</i>: 1048576</p>\n"
msgstr ""
"<b>अधिकतम निवेदित आकार (MaxRequestSize)</b>\n"
"<p>\n"
"Controls the maximum size of HTTP requests and print files.\n"
"Set to 0 to disable this feature (defaults to 0).</p>\n"
"<p>\n"
"<i>ex</i>: 0</p>\n"

#: cupsd.conf.template:162
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Page log (PageLog)</b>\n"
"<p>\n"
"The page log file; if this does not start with a leading /\n"
"then it is assumed to be relative to ServerRoot.  By default set to\n"
"\"/var/log/cups/page_log\".</p>\n"
"<p>\n"
"You can also use the special name <b>syslog</b> to send the output to the\n"
"syslog file or daemon.</p>\n"
"<p>\n"
"<i>ex</i>: /var/log/cups/page_log</p>\n"
msgstr ""
"<b>अस्थायी फ़ाइलें (TempDir)</b>\n"
"<p>\n"
"The directory to put temporary files in. This directory must be\n"
"writable by the user defined above!  Defaults to \"/var/spool/cups/tmp\" or\n"
"the value of the TMPDIR environment variable.</p>\n"
"<p>\n"
"<i>ex</i>: /var/spool/cups/tmp</p>\n"

#: cupsd.conf.template:177
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Preserve job history (PreserveJobHistory)</b>\n"
"<p>\n"
"Whether or not to preserve the job history after a\n"
"job is completed, canceled, or stopped.  Default is Yes.</p>\n"
"<p>\n"
"<i>ex</i>: Yes</p>\n"
msgstr ""
"<b>कार्य इतिहास सुरक्षित रखें (PreserveJobHistory)</b>\n"
"<p>\n"
"Whether or not to preserve the job history after a\n"
"job is completed, canceled, or stopped.  Default is Yes.</p>\n"
"<p>\n"
"<i>ex</i>: Yes</p>\n"

#: cupsd.conf.template:188
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Preserve job files (PreserveJobFiles)</b>\n"
"<p>\n"
"Whether or not to preserve the job files after a\n"
"job is completed, canceled, or stopped.  Default is No.</p>\n"
"<p>\n"
"<i>ex</i>: No</p>\n"
msgstr ""
"<b>कार्य फ़ाइलें सुरक्षित रखें (PreserveJobFiles)</b>\n"
"<p>\n"
"Whether or not to preserve the job files after a\n"
"job is completed, canceled, or stopped.  Default is No.</p>\n"
"<p>\n"
"<i>ex</i>: No</p>\n"

#: cupsd.conf.template:199
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Printcap file (Printcap)</b>\n"
"<p>\n"
"The name of the printcap file.  Default is no filename.\n"
"Leave blank to disable printcap file generation.</p>\n"
"<p>\n"
"<i>ex</i>: /etc/printcap</p>\n"
msgstr ""
"<b>प्रिंटकेप फ़ाइल (Printcap)</b>\n"
"<p>\n"
"The name of the printcap file.  Default is no filename.\n"
"Leave blank to disable printcap file generation.</p>\n"
"<p>\n"
"<i>ex</i>: /etc/printcap</p>\n"

#: cupsd.conf.template:210
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Request directory (RequestRoot)</b>\n"
"<p>\n"
"The directory where request files are stored.\n"
"By default /var/spool/cups.</p>\n"
"<p>\n"
"<i>ex</i>: /var/spool/cups</p>\n"
msgstr ""
"<b>निवेदित डिरेक्ट्री (RequestRoot)</b>\n"
"<p>\n"
"The directory where request files are stored.\n"
"By default /var/spool/cups.</p>\n"
"<p>\n"
"<i>ex</i>: /var/spool/cups</p>\n"

#: cupsd.conf.template:221
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Remote root user (RemoteRoot)</b>\n"
"<p>\n"
"The name of the user assigned to unauthenticated accesses\n"
"from remote systems.  By default \"remroot\".</p>\n"
"<p>\n"
"<i>ex</i>: remroot</p>\n"
msgstr ""
"<b>रिमोट रूट उपयोक्ता (RemoteRoot)</b>\n"
"<p>\n"
"The name of the user assigned to unauthenticated accesses\n"
"from remote systems.  By default \"remroot\".</p>\n"
"<p>\n"
"<i>ex</i>: remroot</p>\n"

#: cupsd.conf.template:232
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Server binaries (ServerBin)</b>\n"
"<p>\n"
"The root directory for the scheduler executables.\n"
"By default /usr/lib/cups or /usr/lib32/cups (IRIX 6.5).</p>\n"
"<p>\n"
"<i>ex</i>: /usr/lib/cups</p>\n"
msgstr ""
"<b>सर्वर बाइनरीज़ (ServerBin)</b>\n"
"<p>\n"
"The root directory for the scheduler executables.\n"
"By default /usr/lib/cups or /usr/lib32/cups (IRIX 6.5).</p>\n"
"<p>\n"
"<i>ex</i>: /usr/lib/cups</p>\n"

#: cupsd.conf.template:243
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Server files (ServerRoot)</b>\n"
"<p>\n"
"The root directory for the scheduler.\n"
"By default /etc/cups.</p>\n"
"<p>\n"
"<i>ex</i>: /etc/cups</p>\n"
msgstr ""
"<b>सर्वर फ़ाइलें (ServerRoot)</b>\n"
"<p>\n"
"The root directory for the scheduler.\n"
"By default /etc/cups.</p>\n"
"<p>\n"
"<i>ex</i>: /etc/cups</p>\n"

#: cupsd.conf.template:254
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>User (User)</b>\n"
"<p>\n"
"The user the server runs under.  Normally this\n"
"must be <b>lp</b>, however you can configure things for another user\n"
"as needed.</p>\n"
"<p>\n"
"Note: the server must be run initially as root to support the\n"
"default IPP port of 631.  It changes users whenever an external\n"
"program is run...</p>\n"
"<p>\n"
"<i>ex</i>: lp</p>\n"
msgstr ""
"<b>उपयोक्ता </b>\n"
"<p>\n"
"The user the server runs under.  Normally this\n"
"must be <b>lp</b>, however you can configure things for another user\n"
"as needed.</p>\n"
"<p>\n"
"Note: the server must be run initially as root to support the\n"
"default IPP port of 631.  It changes users whenever an external\n"
"program is run...</p>\n"
"<p>\n"
"<i>ex</i>: lp</p>\n"

#: cupsd.conf.template:270
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Group (Group)</b>\n"
"<p>\n"
"The group the server runs under.  Normally this\n"
"must be <b>lpadmin</b>, however you can configure things for another\n"
"group as needed.</p>\n"
"<p>\n"
"<i>ex</i>: lpadmin</p>\n"
msgstr ""
"<b>समूह (Group)</b>\n"
"<p>\n"
"The group the server runs under.  Normally this\n"
"must be <b>sys</b>, however you can configure things for another\n"
"group as needed.</p>\n"
"<p>\n"
"<i>ex</i>: sys</p>\n"

#: cupsd.conf.template:282
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>RIP cache (RIPCache)</b>\n"
"<p>\n"
"The amount of memory that each RIP should use to cache\n"
"bitmaps.  The value can be any real number followed by \"k\" for\n"
"kilobytes, \"m\" for megabytes, \"g\" for gigabytes, or \"t\" for tiles\n"
"(1 tile = 256x256 pixels).  Defaults to \"8m\" (8 megabytes).</p>\n"
"<p>\n"
"<i>ex</i>: 8m</p>\n"
msgstr ""
"<b>रिप कैश (RIPCache)</b>\n"
"<p>\n"
"The amount of memory that each RIP should use to cache\n"
"bitmaps.  The value can be any real number followed by \"k\" for\n"
"kilobytes, \"m\" for megabytes, \"g\" for gigabytes, or \"t\" for tiles\n"
"(1 tile = 256x256 pixels).  Defaults to \"8m\" (8 megabytes).</p>\n"
"<p>\n"
"<i>ex</i>: 8m</p>\n"

#: cupsd.conf.template:295
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Temporary files (TempDir)</b>\n"
"<p>\n"
"The directory to put temporary files in. This directory must be\n"
"writable by the user defined above!  Defaults to \"/var/spool/cups/tmp\" or\n"
"the value of the TMPDIR environment variable.</p>\n"
"<p>\n"
"<i>ex</i>: /var/spool/cups/tmp</p>\n"
msgstr ""
"<b>अस्थायी फ़ाइलें (TempDir)</b>\n"
"<p>\n"
"The directory to put temporary files in. This directory must be\n"
"writable by the user defined above!  Defaults to \"/var/spool/cups/tmp\" or\n"
"the value of the TMPDIR environment variable.</p>\n"
"<p>\n"
"<i>ex</i>: /var/spool/cups/tmp</p>\n"

#: cupsd.conf.template:307
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Filter limit (FilterLimit)</b>\n"
"<p>\n"
"Sets the maximum cost of all job filters that can be run\n"
"at the same time.  A limit of 0 means no limit.  A typical job may need\n"
"a filter limit of at least 200; limits less than the minimum required\n"
"by a job force a single job to be printed at any time.</p>\n"
"<p>\n"
"The default limit is 0 (unlimited).</p>\n"
"<p>\n"
"<i>ex</i>: 200</p>\n"
msgstr ""
"<b>फ़िल्टर सीमा (FilterLimit)</b>\n"
"<p>\n"
"Sets the maximum cost of all job filters that can be run\n"
"at the same time.  A limit of 0 means no limit.  A typical job may need\n"
"a filter limit of at least 200; limits less than the minimum required\n"
"by a job force a single job to be printed at any time.</p>\n"
"<p>\n"
"The default limit is 0 (unlimited).</p>\n"
"<p>\n"
"<i>ex</i>: 200</p>\n"

#: cupsd.conf.template:322
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Listen to (Port/Listen)</b>\n"
"<p>\n"
"Ports/addresses that are listened to.  The default port 631 is reserved\n"
"for the Internet Printing Protocol (IPP) and is what is used here.</p>\n"
"<p>\n"
"You can have multiple Port/Listen lines to listen to more than one\n"
"port or address, or to restrict access.</p>\n"
"<p>\n"
"Note: Unfortunately, most web browsers don't support TLS or HTTP Upgrades\n"
"for encryption.  If you want to support web-based encryption you will\n"
"probably need to listen on port 443 (the \"HTTPS\" port...).</p>\n"
"<p>\n"
"<i>ex</i>: 631, myhost:80, 1.2.3.4:631</p>\n"
msgstr ""
"<b>को सुनें (Port/Listen)</b>\n"
"<p>\n"
"Ports/addresses that are listened to.  The default port 631 is reserved\n"
"for the Internet Printing Protocol (IPP) and is what is used here.</p>\n"
"<p>\n"
"You can have multiple Port/Listen lines to listen to more than one\n"
"port or address, or to restrict access.</p>\n"
"<p>\n"
"Note: Unfortunately, most web browsers don't support टीएलएस or HTTP "
"Upgrades\n"
"for encryption.  If you want to support web-based encryption you will\n"
"probably need to listen on port 443 (the \"HTTPS\" port...).</p>\n"
"<p>\n"
"<i>ex</i>: 631, myhost:80, 1.2.3.4:631</p>\n"

#: cupsd.conf.template:348
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Hostname lookups (HostNameLookups)</b>\n"
"<p>\n"
"Whether or not to do lookups on IP addresses to get a\n"
"fully-qualified hostname.  This defaults to Off for performance reasons...</"
"p>\n"
"<p>\n"
"<i>ex</i>: On</p>\n"
msgstr ""
"<b>होस्ट नाम लुकअप्स (HostNameLookups)</b>\n"
"<p>\n"
"Whether or not to do lookups on IP addresses to get a\n"
"fully-qualified hostname.  This defaults to Off for performance reasons...</"
"p>\n"
"<p>\n"
"<i>ex</i>: On</p>\n"

#: cupsd.conf.template:359
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Keep alive (KeepAlive)</b>\n"
"<p>\n"
"Whether or not to support the Keep-Alive connection\n"
"option.  Default is on.</p>\n"
"<p>\n"
"<i>ex</i>: On</p>\n"
msgstr ""
"<b>जीवंत बनाए रखें (KeepAlive)</b>\n"
"<p>\n"
"Whether or not to support the Keep-Alive connection\n"
"option.  Default is on.</p>\n"
"<p>\n"
"<i>ex</i>: On</p>\n"

#: cupsd.conf.template:370
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Keep-alive timeout (KeepAliveTimeout)</b>\n"
"<p>\n"
"The timeout (in seconds) before Keep-Alive connections are\n"
"automatically closed.  Default is 60 seconds.</p>\n"
"<p>\n"
"<i>ex</i>: 60</p>\n"
msgstr ""
"<b>जीवंत बनाए रखें टाइम आउट (KeepAliveTimeout)</b>\n"
"<p>\n"
"The timeout (in seconds) before Keep-Alive connections are\n"
"automatically closed.  Default is 60 seconds.</p>\n"
"<p>\n"
"<i>ex</i>: 60</p>\n"

#: cupsd.conf.template:381
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Max clients (MaxClients)</b>\n"
"<p>\n"
"Controls the maximum number of simultaneous clients that\n"
"will be handled.  Defaults to 100.</p>\n"
"<p>\n"
"<i>ex</i>: 100</p>\n"
msgstr ""
"<b>अधिकतम क्लाएंट्स (MaxClients)</b>\n"
"<p>\n"
"Controls the maximum number of simultaneous clients that\n"
"will be handled.  Defaults to 100.</p>\n"
"<p>\n"
"<i>ex</i>: 100</p>\n"

#: cupsd.conf.template:392
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Max request size (MaxRequestSize)</b>\n"
"<p>\n"
"Controls the maximum size of HTTP requests and print files.\n"
"Set to 0 to disable this feature (defaults to 0).</p>\n"
"<p>\n"
"<i>ex</i>: 0</p>\n"
msgstr ""
"<b>अधिकतम निवेदित आकार (MaxRequestSize)</b>\n"
"<p>\n"
"Controls the maximum size of HTTP requests and print files.\n"
"Set to 0 to disable this feature (defaults to 0).</p>\n"
"<p>\n"
"<i>ex</i>: 0</p>\n"

#: cupsd.conf.template:403
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Client timeout (Timeout)</b>\n"
"<p>\n"
"The timeout (in seconds) before requests time out.  Default is 300 seconds.</"
"p>\n"
"<p>\n"
"<i>ex</i>: 300</p>\n"
msgstr ""
"<b>क्लाएंट टाइम आउट (Timeout)</b>\n"
"<p>\n"
"The timeout (in seconds) before requests time out.  Default is 300 seconds.</"
"p>\n"
"<p>\n"
"<i>ex</i>: 300</p>\n"

#: cupsd.conf.template:413
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Use browsing (Browsing)</b>\n"
"<p>\n"
"Whether or not to <b>listen</b> to printer \n"
"information from other CUPS servers.  \n"
"</p>\n"
"<p>\n"
"Enabled by default.\n"
"</p>\n"
"<p>\n"
"Note: to enable the <b>sending</b> of browsing\n"
"information from this CUPS server to the LAN,\n"
"specify a valid <i>BrowseAddress</i>.\n"
"</p>\n"
"<p>\n"
"<i>ex</i>: On</p>\n"
msgstr ""
"<b>ब्राउज़िंग इस्तेमाल करें (Browsing)</b>\n"
"<p>\n"
"क्या प्रिंटर जानकारी को <b>सुनें</b> या नहीं \n"
"अन्य कप्स सर्वर से.  \n"
"</p>\n"
"<p>\n"
"डिफ़ॉल्ट से सक्षम किया गया है.\n"
"</p>\n"
"<p>\n"
"टीप: ब्राउजिंग जानकारी <b>भेजना</b> सक्षम करने के लिए\n"
"इस कप्स सर्वर से लैन पर,\n"
"एक वैध <i>ब्राउज़ पता</i> निर्दिष्ट करें.\n"
"</p>\n"
"<p>\n"
"<i>ex</i>: On</p>\n"

#: cupsd.conf.template:433
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Use short names (BrowseShortNames)</b>\n"
"<p>\n"
"Whether or not to use \"short\" names for remote printers\n"
"when possible (e.g. \"printer\" instead of \"printer@host\").  Enabled by\n"
"default.</p>\n"
"<p>\n"
"<i>ex</i>: Yes</p>\n"
msgstr ""
"<b>कार्य फ़ाइलें सुरक्षित रखें (PreserveJobFiles)</b>\n"
"<p>\n"
"Whether or not to preserve the job files after a\n"
"job is completed, canceled, or stopped.  Default is No.</p>\n"
"<p>\n"
"<i>ex</i>: No</p>\n"

#: cupsd.conf.template:445
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Browse addresses (BrowseAddress)</b>\n"
"<p>\n"
"Specifies a broadcast address to be used.  By\n"
"default browsing information is broadcast to all active interfaces.</p>\n"
"<p>\n"
"Note: HP-UX 10.20 and earlier do not properly handle broadcast unless\n"
"you have a Class A, B, C, or D netmask (i.e. no CIDR support).</p>\n"
"<p>\n"
"<i>ex</i>: x.y.z.255, x.y.255.255</p>\n"
msgstr ""

#: cupsd.conf.template:461
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Browse allow/deny (BrowseAllow/BrowseDeny)</b>\n"
"<p>\n"
"<u>BrowseAllow</u>: specifies an address mask to allow for incoming browser\n"
"packets. The default is to allow packets from all addresses.</p>\n"
"<p>\n"
"<u>BrowseDeny</u>: specifies an address mask to deny for incoming browser\n"
"packets. The default is to deny packets from no addresses.</p>\n"
"<p>\n"
"Both \"BrowseAllow\" and \"BrowseDeny\" accept the following notations for\n"
"addresses:</p>\n"
"<pre>\n"
"All\n"
"None\n"
"*.domain.com\n"
".domain.com\n"
"host.domain.com\n"
"nnn.*\n"
"nnn.nnn.*\n"
"nnn.nnn.nnn.*\n"
"nnn.nnn.nnn.nnn\n"
"nnn.nnn.nnn.nnn/mm\n"
"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
"</pre><p>\n"
"The hostname/domainname restrictions only work if you have turned hostname\n"
"lookups on!</p>\n"
msgstr ""

#: cupsd.conf.template:492
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Browse interval (BrowseInterval)</b>\n"
"<p>\n"
"The time between browsing updates in seconds.  Default\n"
"is 30 seconds.</p>\n"
"<p>\n"
"Note that browsing information is sent whenever a printer's state changes\n"
"as well, so this represents the maximum time between updates.</p>\n"
"<p>\n"
"Set this to 0 to disable outgoing broadcasts so your local printers are\n"
"not advertised but you can still see printers on other hosts.</p>\n"
"<p>\n"
"<i>ex</i>: 30</p>\n"
msgstr ""

#: cupsd.conf.template:509
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Browse order (BrowseOrder)</b>\n"
"<p>\n"
"Specifies the order of BrowseAllow/BrowseDeny comparisons.</p>\n"
"<p>\n"
"<i>ex</i>: allow,deny</p>\n"
msgstr ""
"<b>ब्राउज़ अनुक्रम (BrowseOrder)</b>\n"
"<p>\n"
"ब्राउज़ स्वीकारें/ब्राउज नकारें तुलना के अनुक्रम को निर्दिष्ट करता है.</p>\n"
"<p>\n"
"<i>ex</i>: स्वीकारें,नकारें</p>\n"

#: cupsd.conf.template:520
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Browse poll (BrowsePoll)</b>\n"
"<p>\n"
"Poll the named server(s) for printers.</p>\n"
"<p>\n"
"<i>ex</i>: myhost:631</p>\n"
msgstr ""
"<b>ब्राउज़ अनुक्रम (BrowseOrder)</b>\n"
"<p>\n"
"ब्राउज़ स्वीकारें/ब्राउज नकारें तुलना के अनुक्रम को निर्दिष्ट करता है.</p>\n"
"<p>\n"
"<i>ex</i>: स्वीकारें,नकारें</p>\n"

#: cupsd.conf.template:530
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Browse port (BrowsePort)</b>\n"
"<p>\n"
"The port used for UDP broadcasts.  By default this is\n"
"the IPP port; if you change this you need to do it on all servers.\n"
"Only one BrowsePort is recognized.</p>\n"
"<p>\n"
"<i>ex</i>: 631</p>\n"
msgstr ""
"<b>ब्राउज़ अनुक्रम (BrowseOrder)</b>\n"
"<p>\n"
"ब्राउज़ स्वीकारें/ब्राउज नकारें तुलना के अनुक्रम को निर्दिष्ट करता है.</p>\n"
"<p>\n"
"<i>ex</i>: स्वीकारें,नकारें</p>\n"

#: cupsd.conf.template:542
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Browse relay (BrowseRelay)</b>\n"
"<p>\n"
"Relay browser packets from one address/network to another.</p>\n"
"<p>\n"
"<i>ex</i>: src-address dest-address</p>\n"
msgstr ""
"<b>ब्राउज़ अनुक्रम (BrowseOrder)</b>\n"
"<p>\n"
"ब्राउज़ स्वीकारें/ब्राउज नकारें तुलना के अनुक्रम को निर्दिष्ट करता है.</p>\n"
"<p>\n"
"<i>ex</i>: स्वीकारें,नकारें</p>\n"

#: cupsd.conf.template:552
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Browse timeout (BrowseTimeout)</b>\n"
"<p>\n"
"The timeout (in seconds) for network printers - if we don't\n"
"get an update within this time the printer will be removed\n"
"from the printer list.  This number definitely should not be\n"
"less the BrowseInterval value for obvious reasons.  Defaults\n"
"to 300 seconds.</p>\n"
"<p>\n"
"<i>ex</i>: 300</p>\n"
msgstr ""
"<b>क्लाएंट टाइम आउट (Timeout)</b>\n"
"<p>\n"
"The timeout (in seconds) before requests time out.  Default is 300 seconds.</"
"p>\n"
"<p>\n"
"<i>ex</i>: 300</p>\n"

#: cupsd.conf.template:566
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Implicit classes (ImplicitClasses)</b>\n"
"<p>\n"
"Whether or not to use implicit classes.</p>\n"
"<p>\n"
"Printer classes can be specified explicitly in the classes.conf\n"
"file, implicitly based upon the printers available on the LAN, or\n"
"both.</p>\n"
"<p>\n"
"When ImplicitClasses is On, printers on the LAN with the same name\n"
"(e.g. Acme-LaserPrint-1000) will be put into a class with the same\n"
"name. This allows you to setup multiple redundant queues on a LAN\n"
"without a lot of administrative difficulties.  If a user sends a\n"
"job to Acme-LaserPrint-1000, the job will go to the first available\n"
"queue.</p>\n"
"<p>\n"
"Enabled by default.</p>\n"
msgstr ""

#: cupsd.conf.template:587
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>System group (SystemGroup)</b>\n"
"<p>\n"
"The group name for \"System\" (printer administration)\n"
"access.  The default varies depending on the operating system, but\n"
"will be <b>sys</b>, <b>system</b>, or <b>root</b> (checked for in that "
"order).</p>\n"
"<p>\n"
"<i>ex</i>: lpadmin</p>\n"
msgstr ""
"<b>समूह (Group)</b>\n"
"<p>\n"
"The group the server runs under.  Normally this\n"
"must be <b>sys</b>, however you can configure things for another\n"
"group as needed.</p>\n"
"<p>\n"
"<i>ex</i>: sys</p>\n"

#: cupsd.conf.template:599
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Encryption certificate (ServerCertificate)</b>\n"
"<p>\n"
"The file to read containing the server's certificate.\n"
"Defaults to \"/etc/cups/ssl/server.crt\".</p>\n"
"<p>\n"
"<i>ex</i>: /etc/cups/ssl/server.crt</p>\n"
msgstr ""
"<b>एनक्रिप्शन प्रमाणपत्र (ServerCertificate)</b>\n"
"<p>\n"
"सर्वर का प्रमाणपत्र पढ़ने के लिए फ़ाइल.\n"
"डिफ़ॉल्ट है \"/etc/cups/ssl/server.crt\".</p>\n"
"<p>\n"
"<i>ex</i>: /etc/cups/ssl/server.crt</p>\n"

#: cupsd.conf.template:610
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Encryption key (ServerKey)</b>\n"
"<p>\n"
"The file to read containing the server's key.\n"
"Defaults to \"/etc/cups/ssl/server.key\".</p>\n"
"<p>\n"
"<i>ex</i>: /etc/cups/ssl/server.key</p>\n"
msgstr ""
"<b>एनक्रिप्शन प्रमाणपत्र (ServerCertificate)</b>\n"
"<p>\n"
"सर्वर का प्रमाणपत्र पढ़ने के लिए फ़ाइल.\n"
"डिफ़ॉल्ट है \"/etc/cups/ssl/server.crt\".</p>\n"
"<p>\n"
"<i>ex</i>: /etc/cups/ssl/server.crt</p>\n"

#: cupsd.conf.template:621
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"Access permissions\n"
"Access permissions for each directory served by the scheduler.\n"
"Locations are relative to DocumentRoot...\n"
"AuthType: the authorization to use:\n"
"None   - Perform no authentication\n"
"Basic  - Perform authentication using the HTTP Basic method.\n"
"Digest - Perform authentication using the HTTP Digest method.\n"
"(Note: local certificate authentication can be substituted by\n"
"the client for Basic or Digest when connecting to the\n"
"localhost interface)\n"
"AuthClass: the authorization class; currently only Anonymous, User,\n"
"System (valid user belonging to group SystemGroup), and Group\n"
"(valid user belonging to the specified group) are supported.\n"
"AuthGroupName: the group name for \"Group\" authorization.\n"
"Order: the order of Allow/Deny processing.\n"
"Allow: allows access from the specified hostname, domain, IP address, or\n"
"network.\n"
"Deny: denies access from the specified hostname, domain, IP address, or\n"
"network.\n"
"Both \"Allow\" and \"Deny\" accept the following notations for addresses:\n"
"All\n"
"None\n"
"*.domain.com\n"
".domain.com\n"
"host.domain.com\n"
"nnn.*\n"
"nnn.nnn.*\n"
"nnn.nnn.nnn.*\n"
"nnn.nnn.nnn.nnn\n"
"nnn.nnn.nnn.nnn/mm\n"
"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
"The host and domain address require that you enable hostname lookups\n"
"with \"HostNameLookups On\" above.\n"
"Encryption: whether or not to use encryption; this depends on having\n"
"the OpenSSL library linked into the CUPS library and scheduler.\n"
"Possible values:\n"
"Always       - Always use encryption (SSL)\n"
"Never        - Never use encryption\n"
"Required     - Use TLS encryption upgrade\n"
"IfRequested  - Use encryption if the server requests it\n"
"The default value is \"IfRequested\".\n"
msgstr ""

#: cupsd.conf.template:707
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Authentication (AuthType)</b>\n"
"<p>\n"
"The authorization to use:<p>\n"
"<ul type=circle>\n"
"<li><i>None</i>   - Perform no authentication.</li>\n"
"<li><i>Basic</i>  - Perform authentication using the HTTP Basic method.</"
"li>\n"
"<li><i>Digest</i> - Perform authentication using the HTTP Digest method.</"
"li>\n"
"</ul><p>\n"
"Note: local certificate authentication can be substituted by\n"
"the client for <i>Basic</i> or <i>Digest</i> when connecting to the\n"
"localhost interface.</p>\n"
msgstr ""

#: cupsd.conf.template:721
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Class (AuthClass)</b>\n"
"<p>\n"
"The authorization class; currently only <i>Anonymous</i>, <i>User</i>,\n"
"<i>System</i> (valid user belonging to group SystemGroup), and <i>Group</i>\n"
"(valid user belonging to the specified group) are supported.</p>\n"
msgstr ""
"<b>फ़ॉन्ट पथ (FontPath)</b>\n"
"<p>\n"
"सभी फ़ॉन्ट फ़ाइलों को निर्धारित करने का पथ (currently only for pstoraster).\n"
"By default /usr/share/cups/fonts.</p>\n"
"<p>\n"
"<i>ex</i>: /usr/share/cups/fonts</p>\n"

#: cupsd.conf.template:729
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<p>The user/group names allowed to access the resource. The format is a\n"
"comma separated list.</p>\n"
msgstr ""
"<p>उपयोक्ता/समूह नाम जो रिसोर्स को एक्सेस करने के लिए स्वीकार्य हैं. फॉर्मेट है\n"
"कॉमा से अलग की गई सूची.</p>\n"

#: cupsd.conf.template:734
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Satisfy (Satisfy)</b>\n"
"<p>\n"
"This directive controls whether all specified conditions must\n"
"be satisfied to allow access to the resource. If set to \"all\",\n"
"then all authentication and access control conditions must be\n"
"satisfied to allow access.\n"
"</p>\n"
"<p>\n"
"Setting Satisfy to \"any\" allows a user to gain access if the\n"
"authentication <i>or</i> access control requirements are satisfied.\n"
"For example, you might require authentication for remote access,\n"
"but allow local access without authentication.\n"
"</p>\n"
"<p>\n"
"The default is \"all\".\n"
"</p> \n"
msgstr ""

#: cupsd.conf.template:753
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Authentication group name (AuthGroupName)</b>\n"
"<p>\n"
"The group name for <i>Group</i> authorization.</p>\n"
msgstr ""
"<b>प्रामाणिक समूह नाम (AuthGroupName)</b>\n"
"<p>\n"
"समूह नाम <i>समूह</i> अनुमोदन के लिए.</p>\n"

#: cupsd.conf.template:759
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>ACL order (Order)</b>\n"
"<p>\n"
"The order of Allow/Deny processing.</p>\n"
msgstr ""
"<b>ब्राउज़ अनुक्रम (BrowseOrder)</b>\n"
"<p>\n"
"ब्राउज़ स्वीकारें/ब्राउज नकारें तुलना के अनुक्रम को निर्दिष्ट करता है.</p>\n"
"<p>\n"
"<i>ex</i>: स्वीकारें,नकारें</p>\n"

#: cupsd.conf.template:765
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Allow</b>\n"
"<p>\n"
"Allows access from the specified hostname, domain, IP address, or\n"
"network. Possible values are:</p>\n"
"<pre>\n"
"All\n"
"None\n"
"*.domain.com\n"
".domain.com\n"
"host.domain.com\n"
"nnn.*\n"
"nnn.nnn.*\n"
"nnn.nnn.nnn.*\n"
"nnn.nnn.nnn.nnn\n"
"nnn.nnn.nnn.nnn/mm\n"
"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
"</pre><p>\n"
"The host and domain address require that you enable hostname lookups\n"
"with \"HostNameLookups On\" above.</p>\n"
msgstr ""

#: cupsd.conf.template:787
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>ACL addresses (Allow/Deny)</b>\n"
"<p>\n"
"Allows/Denies access from the specified hostname, domain, IP address, or\n"
"network. Possible values are:</p>\n"
"<pre>\n"
"All\n"
"None\n"
"*.domain.com\n"
".domain.com\n"
"host.domain.com\n"
"nnn.*\n"
"nnn.nnn.*\n"
"nnn.nnn.nnn.*\n"
"nnn.nnn.nnn.nnn\n"
"nnn.nnn.nnn.nnn/mm\n"
"nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm\n"
"</pre><p>\n"
"The host and domain address require that you enable hostname lookups\n"
"with \"HostNameLookups On\" above.</p>\n"
msgstr ""

#: cupsd.conf.template:809
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Encryption (Encryption)</b>\n"
"<p>\n"
"Whether or not to use encryption; this depends on having\n"
"the OpenSSL library linked into the CUPS library and scheduler.</p>\n"
"<p>\n"
"Possible values:</p>\n"
"<ul type=circle>\n"
"<li><i>Always</i>       - Always use encryption (SSL)</li>\n"
"<li><i>Never</i>        - Never use encryption</li>\n"
"<li><i>Required</i>     - Use TLS encryption upgrade</li>\n"
"<li><i>IfRequested</i>  - Use encryption if the server requests it</li>\n"
"</ul><p>\n"
"The default value is \"IfRequested\".</p>\n"
msgstr ""

#: cupsd.conf.template:825
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Access permissions</b>\n"
"<p>\n"
"Access permissions for each directory served by the scheduler.\n"
"Locations are relative to DocumentRoot...</p>\n"
msgstr ""
"<b>सर्वर फ़ाइलें (ServerRoot)</b>\n"
"<p>\n"
"The root directory for the scheduler.\n"
"By default /etc/cups.</p>\n"
"<p>\n"
"<i>ex</i>: /etc/cups</p>\n"

#: cupsd.conf.template:832
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Auto purge jobs (AutoPurgeJobs)</b>\n"
"<p>\n"
"Automatically purge jobs when not needed for quotas.\n"
"Default is No.</p>\n"
msgstr ""
"<b>Port</b>\n"
"<p>\n"
" कप्स डेमन जिस पोर्ट पर सुनेगा उसका मान. डिफ़ॉल्ट है 631.</p>\n"

#: cupsd.conf.template:841
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Browse protocols (BrowseProtocols)</b>\n"
"<p>\n"
"Which protocols to use for browsing.  Can be\n"
"any of the following separated by whitespace and/or commas:</p>\n"
"<ul type=circle>\n"
"<li><i>all</i>  - Use all supported protocols.</li>\n"
"<li><i>cups</i> - Use the CUPS browse protocol.</li>\n"
"<li><i>slp</i>  - Use the SLPv2 protocol.</li>\n"
"</ul><p>\n"
"The default is <b>cups</b>.</p>\n"
"<p>\n"
"Note: If you choose to use SLPv2, it is <b>strongly</b> recommended that\n"
"you have at least one SLP Directory Agent (DA) on your\n"
"network.  Otherwise, browse updates can take several seconds,\n"
"during which the scheduler will not response to client\n"
"requests.</p>\n"
msgstr ""

#: cupsd.conf.template:862
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Classification (Classification)</b>\n"
"<p>\n"
"The classification level of the server.  If set, this\n"
"classification is displayed on all pages, and raw printing is disabled.\n"
"The default is the empty string.</p>\n"
"<p>\n"
"<i>ex</i>: confidential\n"
msgstr ""
"<b>वर्गीकरण (Classification)</b>\n"
"<p>\n"
"सर्वर का वर्गीकरण स्तर.  यदि यह सेट किया जाता है,\n"
"वर्गीकरण सभी पृष्ठों पर दिखाई देगा, तथा रॉ छपाई अक्षम किया जाएगा.\n"
"डिफ़ॉल्ट रिक्त स्ट्रिंग है.</p>\n"
"<p>\n"
"<i>ex</i>: गोपनीय\n"

#: cupsd.conf.template:874
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Allow overrides (ClassifyOverride)</b>\n"
"<p>\n"
"Whether to allow users to override the classification\n"
"on printouts. If enabled, users can limit banner pages to before or\n"
"after the job, and can change the classification of a job, but cannot\n"
"completely eliminate the classification or banners.</p>\n"
"<p>\n"
"The default is off.</p>\n"
msgstr ""

#: cupsd.conf.template:887
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Hide implicit members (HideImplicitMembers)</b>\n"
"<p>\n"
"Whether or not to show the members of an\n"
"implicit class.</p>\n"
"<p>\n"
"When HideImplicitMembers is On, any remote printers that are\n"
"part of an implicit class are hidden from the user, who will\n"
"then only see a single queue even though many queues will be\n"
"supporting the implicit class.</p>\n"
"<p>\n"
"Enabled by default.</p>\n"
msgstr ""

#: cupsd.conf.template:903
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Use &quot;any&quot; classes (ImplicitAnyClasses)</b>\n"
"<p>\n"
"Whether or not to create <b>AnyPrinter</b> implicit\n"
"classes.</p>\n"
"<p>\n"
"When ImplicitAnyClasses is On and a local queue of the same name\n"
"exists, e.g. \"printer\", \"printer@server1\", \"printer@server1\", then\n"
"an implicit class called \"Anyprinter\" is created instead.</p>\n"
"<p>\n"
"When ImplicitAnyClasses is Off, implicit classes are not created\n"
"when there is a local queue of the same name.</p>\n"
"<p>\n"
"Disabled by default.</p>\n"
msgstr ""

#: cupsd.conf.template:921
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Max jobs (MaxJobs)</b>\n"
"<p>\n"
"Maximum number of jobs to keep in memory (active and completed).\n"
"Default is 0 (no limit).</p>\n"
msgstr ""
"<b>अधिकतम क्लाएंट्स (MaxClients)</b>\n"
"<p>\n"
"Controls the maximum number of simultaneous clients that\n"
"will be handled.  Defaults to 100.</p>\n"
"<p>\n"
"<i>ex</i>: 100</p>\n"

#: cupsd.conf.template:930
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Max jobs per user (MaxJobsPerUser)</b>\n"
"<p>\n"
"The MaxJobsPerUser directive controls the maximum number of <i>active</i>\n"
"jobs that are allowed for each user. Once a user reaches the limit, new\n"
"jobs will be rejected until one of the active jobs is completed, stopped,\n"
"aborted, or canceled.</p>\n"
"<p>\n"
"Setting the maximum to 0 disables this functionality.\n"
"Default is 0 (no limit).\n"
"</p>\n"
msgstr ""

#: cupsd.conf.template:945
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Max jobs per printer (MaxJobsPerPrinter)</b>\n"
"<p>\n"
"The MaxJobsPerPrinter directive controls the maximum number of <i>active</"
"i>\n"
"jobs that are allowed for each printer or class. Once a printer or class\n"
"reaches the limit, new jobs will be rejected until one of the active jobs\n"
"is completed, stopped, aborted, or canceled.</p>\n"
"<p>\n"
"Setting the maximum to 0 disables this functionality.\n"
"Default is 0 (no limit).\n"
"</p>\n"
msgstr ""

#: cupsd.conf.template:960
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Port</b>\n"
"<p>\n"
"The port value that the CUPS daemon is listening to. Default is 631.</p>\n"
msgstr ""
"<b>Port</b>\n"
"<p>\n"
" कप्स डेमन जिस पोर्ट पर सुनेगा उसका मान. डिफ़ॉल्ट है 631.</p>\n"

#: cupsd.conf.template:966
#, fuzzy
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<b>Address</b>\n"
"<p>\n"
"The address that the CUPS daemon is listening at. Leave it empty or use\n"
"an asterisk (*) to specify a port value on the entire subnetwork.</p>\n"
msgstr ""
"<b>Port</b>\n"
"<p>\n"
" कप्स डेमन जिस पोर्ट पर सुनेगा उसका मान. डिफ़ॉल्ट है 631.</p>\n"

#: cupsd.conf.template:973
msgid ""
"_: Do not translate the keyword between brackets (e.g. ServerName, "
"ServerAdmin, etc.)\n"
"<p>Check this box if you want to use SSL encryption with this address/port.\n"
"</p>\n"
msgstr ""
"<p>इस बक्से को चेक करें यदि आप इस पता/पोर्ट के साथ एसएसएल एनक्रिप्शन का उपयोग करना "
"चाहते हैं.\n"
"</p>\n"