tde-i18n/tde-i18n-zh_TW/messages/tdewebdev/kxsldbg.po

# translation of kxsldbg.po to Chinese Traditional
#
# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006.
msgid ""
msgstr ""
"Project-Id-Version: kxsldbg\n"
"POT-Creation-Date: 2021-03-12 18:19+0000\n"
"PO-Revision-Date: 2006-09-12 15:06+0800\n"
"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
"dot tw>\n"
"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"

#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Frank Weng (a.k.a. Franklin)"

#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "franklin at goodhorse dot idv dot tw"

#: kxsldbg.cpp:67
msgid "&XSLDbg Handbook"
msgstr ""

#: kxsldbg.cpp:76
msgid "Could not find our part."
msgstr "無法找到 Part。"

#: kxsldbg.cpp:176
msgid "File: %1  Line: %2  Col: %3"
msgstr "檔案：%1  行：%2 欄：%3"

#: kxsldbgpart/kxsldbg_part.cpp:87 kxsldbgpart/kxsldbg_part.cpp:634
#: kxsldbgpart/kxsldbg_part.cpp:636
msgid "Goto XPath"
msgstr "跳到 XPath"

#: kxsldbgpart/kxsldbg_part.cpp:95 kxsldbgpart/xsldbgglobalvariables.ui:185
#: kxsldbgpart/xsldbglocalvariables.ui:122
#, no-c-format
msgid "Evaluate"
msgstr "計算"

#: kxsldbgpart/kxsldbg_part.cpp:109
msgid "Configure Editor..."
msgstr "設定編輯器..."

#: kxsldbgpart/kxsldbg_part.cpp:113
msgid "Configure..."
msgstr "設定..."

#: kxsldbgpart/kxsldbg_part.cpp:118
msgid "Inspect..."
msgstr "檢查..."

#: kxsldbgpart/kxsldbg_part.cpp:125
msgid "Run"
msgstr "執行"

#: kxsldbgpart/kxsldbg_part.cpp:135
msgid "Step"
msgstr "走一步"

#: kxsldbgpart/kxsldbg_part.cpp:140 kxsldbgpart/xsldbgconfig.ui:261
#, no-c-format
msgid "Next"
msgstr "下一步"

#: kxsldbgpart/kxsldbg_part.cpp:145
msgid "Step Up"
msgstr "往上走一步"

#: kxsldbgpart/kxsldbg_part.cpp:150
msgid "Step Down"
msgstr "往下走一步"

#: kxsldbgpart/kxsldbg_part.cpp:156
msgid "Break"
msgstr "中斷"

#: kxsldbgpart/kxsldbg_part.cpp:161
msgid "Enable/Disable"
msgstr "開啟/關閉"

#: kxsldbgpart/kxsldbg_part.cpp:171
msgid "&Source"
msgstr "源碼(&S)"

#: kxsldbgpart/kxsldbg_part.cpp:176
msgid "&Data"
msgstr "資料(&D)"

#: kxsldbgpart/kxsldbg_part.cpp:181
msgid "&Output"
msgstr "輸出(&O)"

#: kxsldbgpart/kxsldbg_part.cpp:186
msgid "Reload Current File From Disk"
msgstr "從磁碟重新載入目前的檔案"

#: kxsldbgpart/kxsldbg_part.cpp:192
msgid "Walk Through Stylesheet..."
msgstr "走過樣式表..."

#: kxsldbgpart/kxsldbg_part.cpp:196
msgid "Stop Wal&king Through Stylesheet"
msgstr "停止走過樣式表(&K)"

#: kxsldbgpart/kxsldbg_part.cpp:200
msgid "Tr&ace Execution of Stylesheet"
msgstr "追蹤樣式表的執行(&A)"

#: kxsldbgpart/kxsldbg_part.cpp:204
msgid "Stop Tracing of Stylesheet"
msgstr "停止追蹤樣式表的執行"

#: kxsldbgpart/kxsldbg_part.cpp:209
msgid "&Evaluate Expression..."
msgstr "計算表示式(&E)"

#: kxsldbgpart/kxsldbg_part.cpp:214
msgid "Goto &XPath..."
msgstr "跳到 XPath(&X)..."

#: kxsldbgpart/kxsldbg_part.cpp:219
msgid "Lookup SystemID..."
msgstr "搜尋系統代碼..."

#: kxsldbgpart/kxsldbg_part.cpp:224
msgid "Lookup PublicID..."
msgstr "搜尋公開代碼..."

#: kxsldbgpart/kxsldbg_part.cpp:277
msgid "KXsldbgPart"
msgstr "KXsldbgPart"

#: kxsldbgpart/kxsldbg_part.cpp:358
msgid "Debugger Not Ready"
msgstr "除錯器未就緒"

#: kxsldbgpart/kxsldbg_part.cpp:359
msgid "Configure and start the debugger first."
msgstr "請先設定並啟動除錯器。"

#: kxsldbgpart/kxsldbg_part.cpp:376 kxsldbgpart/kxsldbg_part.cpp:382
msgid "Lookup SystemID"
msgstr "搜尋系統代碼"

#: kxsldbgpart/kxsldbg_part.cpp:377 kxsldbgpart/kxsldbg_part.cpp:383
msgid "Please enter SystemID to find:"
msgstr "請輸入要尋找的系統代碼："

#: kxsldbgpart/kxsldbg_part.cpp:408 kxsldbgpart/kxsldbg_part.cpp:413
msgid "Lookup PublicID"
msgstr "搜尋公開代碼"

#: kxsldbgpart/kxsldbg_part.cpp:409 kxsldbgpart/kxsldbg_part.cpp:414
msgid "Please enter PublicID to find:"
msgstr "請輸入要尋找的公開代碼："

#: kxsldbgpart/kxsldbg_part.cpp:622 kxsldbgpart/kxsldbg_part.cpp:624
msgid "Evalute Expression"
msgstr "計算表示式"

#: kxsldbgpart/kxsldbg_part.cpp:622 kxsldbgpart/kxsldbg_part.cpp:624
#: kxsldbgpart/kxsldbg_part.cpp:634 kxsldbgpart/kxsldbg_part.cpp:636
msgid "XPath:"
msgstr "XPath："

#: kxsldbgpart/kxsldbg_part.cpp:738 kxsldbgpart/libxsldbg/xsldbg.cpp:591
msgid "Error: Too many file names supplied via command line.\n"
msgstr "錯誤：命令列中指定了太多檔名。\n"

#: kxsldbgpart/kxsldbg_part.cpp:802
msgid "SystemID or PublicID Resolution Result"
msgstr "系統代碼或公開代碼解析結果"

#: kxsldbgpart/kxsldbg_part.cpp:803
#, c-format
msgid ""
"SystemID or PublicID has been resolved to\n"
".%1"
msgstr ""
"系統代碼或公開代碼已轉換成\n"
".%1"

#: kxsldbgpart/libxsldbg/breakpoint.cpp:623
msgid "disabled"
msgstr "已關閉"

#: kxsldbgpart/libxsldbg/breakpoint.cpp:624
msgid "enabled"
msgstr "已開啟"

#: kxsldbgpart/libxsldbg/breakpoint.cpp:643
msgid ""
"Breakpoint %1 %2 for template: \"%3\" mode: \"%4\" in file \"%5\" at line %6"
msgstr "中斷點 %1 %2 樣本：\"%3\" 模式：\"%4\" 檔案：\"%5\" 行號：%6"

#: kxsldbgpart/libxsldbg/breakpoint.cpp:645
msgid "Breakpoint %1 %2 for template: \"%3\" mode: \"%4\""
msgstr "中斷點 %1 %2 樣本：\"%3\" 模式：\"%4\""

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:94
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:345
msgid "Failed to add breakpoint."
msgstr "加入中斷點失敗。"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:97
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:352
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:800
#: kxsldbgpart/libxsldbg/debugXSL.cpp:510
msgid "Error: Debugger has no files loaded. Try reloading files.\n"
msgstr "錯誤：除錯器未載入檔案。請試著重新載入檔案。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:113
msgid "Error: Unable to parse %1 as a number of frames.\n"
msgstr "錯誤：無法剖析 %1 為框架數量。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:151
msgid "Error: Stylesheet is not valid or file is not loaded.\n"
msgstr "錯誤：樣式表不合法，或是檔案未載入。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:191
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:215
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:302
msgid ""
"Warning: Breakpoint for file \"%1\" at line %2 does not seem to be valid.\n"
msgstr "警告：檔案 \"%1\" 在行號 %2 的中斷點似乎不合法。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:213
msgid "Error: Unable to find a stylesheet file whose name contains %1.\n"
msgstr "錯誤：無法找到名稱內包含 %1 的樣式表檔案。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:223
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:318
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:1031
#: kxsldbgpart/libxsldbg/debugXSL.cpp:679
#: kxsldbgpart/libxsldbg/debugXSL.cpp:713
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1237
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1340 kxsldbgpart/libxsldbg/files.cpp:1353
#: kxsldbgpart/libxsldbg/files_unix.cpp:61
#: kxsldbgpart/libxsldbg/files_unix.cpp:153
#: kxsldbgpart/libxsldbg/search.cpp:113 kxsldbgpart/libxsldbg/search.cpp:1198
#: kxsldbgpart/libxsldbg/search.cpp:1261 kxsldbgpart/libxsldbg/search.cpp:1322
#: kxsldbgpart/libxsldbg/search.cpp:1374 kxsldbgpart/libxsldbg/search.cpp:1422
#: kxsldbgpart/libxsldbg/search.cpp:1476 kxsldbgpart/libxsldbg/search.cpp:1522
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:105
#: kxsldbgpart/libxsldbg/xsldbg.cpp:512 kxsldbgpart/libxsldbg/xsldbg.cpp:1069
msgid "Error: Out of memory.\n"
msgstr "錯誤：記憶體用盡。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:249
msgid "Error: Data file is invalid. Try the run command first.\n"
msgstr "錯誤：資料檔不合法。請試著先使用 run 命令。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:304
msgid "Error: Unable to find a data file whose name contains %1.\n"
msgstr "錯誤：無法找到名稱內包含 %1 的資料檔案。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:375
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:695
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:821
#: kxsldbgpart/libxsldbg/param_cmds.cpp:107
msgid "Error: Unable to parse %1 as a line number.\n"
msgstr "錯誤：無法剖析 %1 為行號。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:419
msgid "Error: Unable to find the added breakpoint."
msgstr "錯誤：找不到新增的中斷點。"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:425
#: kxsldbgpart/libxsldbg/search.cpp:491 kxsldbgpart/libxsldbg/trace_cmds.cpp:68
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:111
msgid "Error: Invalid arguments to command %1.\n"
msgstr "錯誤：命令 %1 的參數不合法。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:527
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:722
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:848
msgid "Error: Invalid arguments for command %1.\n"
msgstr "錯誤：命令 %1 有不合法的參數。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:596
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:952
msgid ""
"Information: Breakpoint validation has caused breakpoint %1 to be re-"
"created.\n"
msgstr "資訊：中斷點檢查造成中斷點 %1 被重新建立。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:603
msgid "Warning: Breakpoint exits for file \"%1\" at line %2.\n"
msgstr "警告：檔案 %1 行號 %2 的中斷點離開。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:626
msgid "Error: No templates found or unable to add breakpoint.\n"
msgstr "錯誤：找不到樣本，或無法加入中斷點。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:631
#, c-format
msgid ""
"_n: Information: Added %n new breakpoint.\n"
"Information: Added %n new breakpoints."
msgstr "資訊：已新增 %n 中斷點。"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:651
msgid "Error: Failed to add breakpoint for file \"%1\" at line %2.\n"
msgstr "錯誤：加入中斷點到檔案 \"%1\" 行號 %2 失敗。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:653
msgid "Error: Failed to add breakpoint.\n"
msgstr "錯誤：加入中斷點失敗。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:677
msgid "Failed to delete breakpoint."
msgstr "刪除中斷點失敗。"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:714
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:842
msgid "Error: Breakpoint does not exist for file \"%1\" at line %2.\n"
msgstr "錯誤：中斷點不存在於檔案 %1 行號 %2。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:735
msgid "Error: Unable to delete breakpoint %1.\n"
msgstr "錯誤：無法刪除中斷點 %1。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:738
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:864
msgid "Error: Breakpoint %1 does not exist.\n"
msgstr "錯誤：中斷點 %1 不存在。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:745
msgid "Error: Unable to delete breakpoint at template %1.\n"
msgstr "錯誤：無法刪除樣本 %1 的中斷點。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:748
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:871
msgid "Error: Breakpoint at template \"%1\" does not exist.\n"
msgstr "錯誤：樣本 %1 的中斷點不存在。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:797
msgid "Failed to enable/disable breakpoint."
msgstr "開啟/關閉中斷點失敗。"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:861
msgid "Error: Unable to enable/disable breakpoint %1.\n"
msgstr "錯誤：無法開啟/關閉中斷點 %1。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:956
#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:995
msgid "Warning: Validation of breakpoint %1 failed.\n"
msgstr "警告：中斷點 %1 檢查失敗。\n"

#: kxsldbgpart/libxsldbg/breakpoint_cmds.cpp:984
msgid ""
"Information: Breakpoint validation has caused one or more breakpoints to be "
"re-created.\n"
msgstr "資訊：中斷點檢查造成一個或多個中斷點重新建立。\n"

#: kxsldbgpart/libxsldbg/debug.cpp:135
msgid "Error: XSLT source and XML data are empty. Cannot enter the debugger.\n"
msgstr "錯誤：XSLT 來源與 XML 資料為空的。無法進入除錯器。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:532
msgid "Error: The XSLT template named \"%1\" was not found.\n"
msgstr "錯誤：找不到名為 \"%1\" 的 XSLT 樣本。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:535
msgid " template: \"%1\"\n"
msgstr " 樣本： \"%1\"\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:560
#: kxsldbgpart/libxsldbg/debugXSL.cpp:566
msgid "Error: Unable to cd. No stylesheet loaded.\n"
msgstr "錯誤：無法切換目錄。未載入樣式表。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:563
msgid "Error: Unknown arguments to the command %1.\n"
msgstr "錯誤：命令 %1 有未知的參數。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:585
msgid "Error: Invalid arguments to the command %1.\n"
msgstr "錯誤：命令 %1 有不合法的參數。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:606
msgid ""
"_n: Warning: XPath %1 is a Node Set with %n child.\n"
"Warning: XPath %1 is a Node Set with %n children."
msgstr "警告：XPath %1 是一個節點集，有 %n 個子節點。"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:608
msgid "Warning: XPath %1 is an empty Node Set.\n"
msgstr "警告：XPath %1 是空的節點集。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:617
msgid "Error: XPath %1 was not found.\n"
msgstr "錯誤：找不到 XPath %1。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:672
#: kxsldbgpart/libxsldbg/debugXSL.cpp:675
#: kxsldbgpart/libxsldbg/debugXSL.cpp:706
msgid "#%1 template: \"%2\" mode: \"%3\""
msgstr "#%1 樣本：\"%2\" 模式：\"%3\""

#: kxsldbgpart/libxsldbg/debugXSL.cpp:677
#: kxsldbgpart/libxsldbg/debugXSL.cpp:694
#: kxsldbgpart/libxsldbg/debugXSL.cpp:709
#: kxsldbgpart/libxsldbg/debugXSL.cpp:762
msgid " in file \"%1\" at line %2\n"
msgstr "檔案：\"%1\" 行號： %2\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:692
msgid "#%1 template: \"LIBXSLT_DEFAULT\" mode: \"\""
msgstr "#%1 樣本：\"LIBXSLT_DEFAULT\" 模式：\"\""

#: kxsldbgpart/libxsldbg/debugXSL.cpp:735
msgid "\tNo items in call stack.\n"
msgstr "\t呼叫堆疊中沒有項目。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:758
msgid "#%1 template: \"%2\""
msgstr "#%1 樣本： \"%2\""

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1025
msgid "Information: Updating search database. This may take a while...\n"
msgstr "資訊：更新搜尋資料庫中。可能要花一點時間...\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1028
msgid "Information: Looking for breakpoints.\n"
msgstr "資訊：搜尋中斷點中。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1030
msgid "Information: Looking for imports and top-level stylesheets.\n"
msgstr "資訊：搜尋匯入與頂層的樣式表中。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1032
msgid "Information: Looking for xsl:includes.\n"
msgstr "資訊：搜尋 xsl:includes 中。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1034
msgid "Information: Looking for templates.\n"
msgstr "資訊：搜尋樣本中。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1036
msgid "Information: Looking for global variables.\n"
msgstr "資訊：搜尋全域變數中。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1038
msgid "Information: Looking for local variables.\n"
msgstr "資訊：搜尋本地端變數中。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1040
msgid "Information: Formatting output.\n"
msgstr "資訊：格式化輸出中。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1108
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1118
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1136
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1138
msgid ""
"\n"
"Reached template: \"%1\" mode: \"%2\"\n"
msgstr ""
"\n"
"已到達樣本：\"%1\" 模式：\"%2\"\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1295
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2091
msgid "Breakpoint for file \"%1\" at line %2.\n"
msgstr "檔案 \"%1\" 的中斷點，在行號：%2。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1297
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2093
msgid "Breakpoint at text node in file \"%1\".\n"
msgstr "檔案 \"%1\" 中的文字節點的中斷點。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1460
msgid ""
"Unable to print local help. Online help can be found at http://xsldbg."
"sourceforge.net/docs/index.html.\n"
msgstr ""
"無法列印本地端說明文件。您可以在 http://xsldbg.sourceforge.net/docs/index."
"html 找到線上的說明文件。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1613
msgid ""
"\n"
"No breakpoints are set for the file.\n"
msgstr ""
"\n"
"此檔案沒有設定中斷點。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1615
#, c-format
msgid ""
"_n: \tTotal of %n breakpoint present.\n"
"\tTotal of %n breakpoints present."
msgstr "\t總共有 %n 個中斷點。"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1634
msgid "Error: Unable to delete breakpoint.\n"
msgstr "錯誤：無法刪除中斷點。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1656
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1676
msgid "Error: Unable to enable/disable breakpoint.\n"
msgstr "錯誤：無法開啟/關閉中斷點。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1709
msgid " in file \"%1\" at line %2"
msgstr "檔案：\"%1\" 行號：%2"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1717
msgid "Error: Unable to print working directory.\n"
msgstr "錯誤：無法列印工作目錄。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1737
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1759
msgid "Error: Need to use the run command first.\n"
msgstr "錯誤：需要先使用 run 命令。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1794
msgid "Load of source deferred. Use the run command.\n"
msgstr "載入源碼發生延遲。請使用 run 命令。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1834
msgid "Load of data file deferred. Use the run command.\n"
msgstr "載入資料檔發生延遲。請使用 run 命令。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1888
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1901
#: kxsldbgpart/libxsldbg/debugXSL.cpp:2061
#: kxsldbgpart/libxsldbg/file_cmds.cpp:248
#: kxsldbgpart/libxsldbg/file_cmds.cpp:265
#: kxsldbgpart/libxsldbg/param_cmds.cpp:52
#: kxsldbgpart/libxsldbg/param_cmds.cpp:71
#: kxsldbgpart/libxsldbg/param_cmds.cpp:101
#: kxsldbgpart/libxsldbg/param_cmds.cpp:115
msgid "Error: Invalid arguments for the command %1.\n"
msgstr "錯誤：命令 %1 的參數不合法。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1911
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1932
#: kxsldbgpart/libxsldbg/debugXSL.cpp:1940
msgid "Warning: The %1 command is disabled.\n"
msgstr "警告：命令 %1 已關閉。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:1996
msgid "Opening terminal %1.\n"
msgstr "開啟終端機 %1。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:2012
#: kxsldbgpart/libxsldbg/file_cmds.cpp:213
#: kxsldbgpart/libxsldbg/file_cmds.cpp:269
#: kxsldbgpart/libxsldbg/option_cmds.cpp:113
#: kxsldbgpart/libxsldbg/option_cmds.cpp:116
#: kxsldbgpart/libxsldbg/os_cmds.cpp:48
msgid "Error: Missing arguments for the command %1.\n"
msgstr "錯誤：命令 %1 缺少參數。\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:2016
msgid "Warning: The %1 command is disabled\n"
msgstr "警告：命令 %1 已關閉\n"

#: kxsldbgpart/libxsldbg/debugXSL.cpp:2080
msgid "Error: Unknown command %1. Try help.\n"
msgstr "錯誤：未知的命令 %1。請找說明文件。\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:71
msgid "Entity %1 "
msgstr "實體 %1"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:78
msgid "No external General Parsed entities present.\n"
msgstr "沒有看到外部的「一般剖析」（General Parsed）實體。\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:80
#, c-format
msgid ""
"_n: \tTotal of %n entity found.\n"
"\tTotal of %n entities found."
msgstr "\t總共找到 %n 個實體。"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:121
#: kxsldbgpart/libxsldbg/file_cmds.cpp:129
msgid "SystemID \"%1\" was not found in current catalog.\n"
msgstr "在目前的目錄中找不到系統代碼 %1。\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:125
msgid "SystemID \"%1\" maps to: \"%2\"\n"
msgstr "系統代碼 \"%1\" 映射到：\"%2\"\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:168
#: kxsldbgpart/libxsldbg/file_cmds.cpp:176
msgid "PublicID \"%1\" was not found in current catalog.\n"
msgstr "在目前的目錄中找不到公開代碼 \"%1\"。\n"

#: kxsldbgpart/libxsldbg/file_cmds.cpp:172
msgid "PublicID \"%1\" maps to: \"%2\"\n"
msgstr "公開代碼 \"%1\" 映射到：\"%2\"\n"

#: kxsldbgpart/libxsldbg/files.cpp:192 kxsldbgpart/libxsldbg/files.cpp:215
msgid "Error: Unable to open terminal %1.\n"
msgstr "錯誤：無法開啟終端機 %1。\n"

#: kxsldbgpart/libxsldbg/files.cpp:195
msgid "Error: Did not previously open terminal.\n"
msgstr "錯誤：先前未開啟終端機。\n"

#: kxsldbgpart/libxsldbg/files.cpp:497
msgid "Error: The file name \"%1\" is too long.\n"
msgstr "錯誤：檔案名稱 \"%1\" 太長。\n"

#: kxsldbgpart/libxsldbg/files.cpp:521
msgid "Error: Unable to change to directory %1.\n"
msgstr "錯誤：無法變換到目錄 %1。\n"

#: kxsldbgpart/libxsldbg/files.cpp:524
msgid "Changed to directory %1.\n"
msgstr "變換到目錄 %1。\n"

#: kxsldbgpart/libxsldbg/files.cpp:552
msgid "Setting XML Data file name to %1.\n"
msgstr "設定 XML 資料檔案名稱為 %1。\n"

#: kxsldbgpart/libxsldbg/files.cpp:564
msgid "Setting stylesheet file name to %1.\n"
msgstr "設定樣式表檔案名稱為 %1。\n"

#: kxsldbgpart/libxsldbg/files.cpp:581
msgid "Setting stylesheet base path to %1.\n"
msgstr "設定樣式表基礎路徑為 %1。\n"

#: kxsldbgpart/libxsldbg/files.cpp:598
msgid "Missing file name.\n"
msgstr "缺少檔名。\n"

#: kxsldbgpart/libxsldbg/files.cpp:1108 kxsldbgpart/libxsldbg/files.cpp:1143
msgid "Encoding of text failed.\n"
msgstr "文字編碼失敗。\n"

#: kxsldbgpart/libxsldbg/files.cpp:1179
#, c-format
msgid "Unable to initialize encoding %1."
msgstr "無法初始化編碼 %1。"

#: kxsldbgpart/libxsldbg/files.cpp:1184
msgid "Invalid encoding %1.\n"
msgstr "不合法的編碼 %1。\n"

#: kxsldbgpart/libxsldbg/files.cpp:1245
msgid " ----- more ---- \n"
msgstr " ----- 更多 ----- \n"

#: kxsldbgpart/libxsldbg/files.cpp:1363
msgid "Error: Unable to convert %1 to local file name.\n"
msgstr "錯誤：無法轉換 %1 為本地端檔案名稱。\n"

#: kxsldbgpart/libxsldbg/files_unix.cpp:67
msgid "Error: USER environment variable is not set.\n"
msgstr "錯誤：使用者環境變數未設定。\n"

#: kxsldbgpart/libxsldbg/files_unix.cpp:199
msgid ""
"Error: The value of the option docspath or searchresultspath is empty. See "
"help on setoption or options command for more information.\n"
msgstr ""
"錯誤：docspath 或 searchresultspath 選項值是空的。詳情請參考 setoption 說明"
"或 options 命令的說明。\n"

#: kxsldbgpart/libxsldbg/help_unix.cpp:59
#: kxsldbgpart/libxsldbg/help_unix.cpp:64
msgid "xsldbg version"
msgstr "xsldbg 版本"

#: kxsldbgpart/libxsldbg/help_unix.cpp:60
#: kxsldbgpart/libxsldbg/help_unix.cpp:65
msgid "Help document version"
msgstr "說明文件版本"

#: kxsldbgpart/libxsldbg/help_unix.cpp:61
#: kxsldbgpart/libxsldbg/help_unix.cpp:66
msgid "Help not found for command"
msgstr "找不到說明文件：命令"

#: kxsldbgpart/libxsldbg/help_unix.cpp:98
msgid ""
"Error: Unable to display help. Help files not found in %1 or xsldbg not "
"found in path.\n"
msgstr ""
"錯誤：無法顯示說明。說明檔在 %1 內找不到，或是 xsldbg 在路徑中找不到。\n"

#: kxsldbgpart/libxsldbg/help_unix.cpp:100
msgid "Error: Unable to find xsldbg or help files.\n"
msgstr "錯誤：找不到 xsldbg 或說明檔。\n"

#: kxsldbgpart/libxsldbg/help_unix.cpp:105
msgid "Error: Unable to print help file.\n"
msgstr "錯誤：無法列印說明檔。\n"

#: kxsldbgpart/libxsldbg/help_unix.cpp:110
msgid "Error: No path to documentation; aborting help.\n"
msgstr "錯誤：沒有文件路徑，取消說明。\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:140
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:243
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:383
msgid "Error: XPath %1 results in an empty Node Set.\n"
msgstr "錯誤：XPath %1 導致一個空的節點集合。\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:175
msgid ""
"Information: Temporarily setting document's encoding to UTF-8. Previously "
"was %1.\n"
msgstr "資訊：暫時設定文件編碼為 UTF-8。先前為 %1。\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:229
msgid "Error: Unable to save temporary results to %1.\n"
msgstr "錯誤：無法儲存暫時結果到 %1。\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:251
msgid "NULL string value supplied."
msgstr "提供了 NULL 字串。"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:262
msgid "Unable to convert XPath to string."
msgstr "無法轉換 XPath 為字串。"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:358
msgid ""
"Warning: Unable to print expression. No stylesheet was properly loaded.\n"
msgstr "警告：無法列印表示式。無法正確載入樣式表。\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:418
msgid " Global %1\n"
msgstr " 全域 %1\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:421
msgid " Global "
msgstr " 全域 "

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:424
msgid " Global = %1\n"
msgstr " 全域 = %1\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:427
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:430
msgid ""
" Global = %1\n"
"%2"
msgstr ""
" 全域 = %1\n"
"%2"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:430
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:568
msgid "Warning: No value assigned to variable.\n"
msgstr "警告：沒有指定值給變數。\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:483
msgid ""
"Error: Debugger has no files loaded or libxslt has not reached a template.\n"
"Try reloading files or taking more steps.\n"
msgstr ""
"錯誤：除錯器未載入檔案，或是 libxslt 未取得樣本。\n"
"請試著重新載入檔案，或多做幾個步驟。\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:520
msgid ""
"Error: Libxslt has not initialized variables yet; try stepping to a "
"template.\n"
msgstr "錯誤：Libxslt 尚未初始化變數。請試著進入樣本。\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:556
#, c-format
msgid " Local %1"
msgstr " 本地端 %1"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:559
msgid " Local "
msgstr " 本地端 "

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:562
msgid " Local = %1\n"
msgstr " 本地端 = %1\n"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:565
#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:568
msgid ""
" Local = %1\n"
"%2"
msgstr ""
" 本地端 = %1\n"
"%2"

#: kxsldbgpart/libxsldbg/nodeview_cmds.cpp:583
msgid ""
"Error: Libxslt has not initialized variables yet; try stepping past the xsl:"
"param elements in the template.\n"
msgstr "錯誤：Libxslt 尚未初始化變數。請試著進入樣本中的 xsl:param 元素。\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:73
#: kxsldbgpart/libxsldbg/option_cmds.cpp:107
msgid "Error: Unable to parse %1 as an option value.\n"
msgstr "錯誤：無法剖析 %1 為選項值。\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:110
msgid "Error: Unknown option name %1.\n"
msgstr "錯誤：未知的選項名稱 %1。\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:146
msgid "Option %1 = %2\n"
msgstr "選項 %1 = %2\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:157
msgid "Option %1 = \"%2\"\n"
msgstr "選項 %1 = \"%2\"\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:159
msgid "Option %1 = \"\"\n"
msgstr "選項 %1 = \"\"\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:230
msgid "\tNo expression watches set.\n"
msgstr "\t沒有設定監控表示式。\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:237
msgid " WatchExpression %1 "
msgstr " 監控表示式 %1"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:263
msgid ""
"Error: Unable to add watch expression \"%1\". It already has been added or "
"it cannot be watched.\n"
msgstr ""
"錯誤：無法新增監控表示式 \"%1\"。可能因為它已經新增過了，或是它無法被監控。\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:287
msgid "Error: Unable to parse %1 as a watchID.\n"
msgstr "錯誤：無法剖析 %1 為監控代碼。\n"

#: kxsldbgpart/libxsldbg/option_cmds.cpp:292
msgid "Error: Watch expression %1 does not exist.\n"
msgstr "錯誤：監控表示式 %1 不存在。\n"

#: kxsldbgpart/libxsldbg/options.cpp:296 kxsldbgpart/libxsldbg/options.cpp:326
msgid "Error: Option %1 is not a valid boolean/integer option.\n"
msgstr "錯誤：選項 %1 不是合法的布林/整數選項。\n"

#: kxsldbgpart/libxsldbg/options.cpp:368 kxsldbgpart/libxsldbg/options.cpp:399
msgid "Error: Option %1 is not a valid string xsldbg option.\n"
msgstr "錯誤：選項 %1 不是合法的字串 xsldbg 選項。\n"

#: kxsldbgpart/libxsldbg/options.cpp:511
msgid " Parameter %1 %2=\"%3\"\n"
msgstr " 參數 %1 %2 = \"%3\"\n"

#: kxsldbgpart/libxsldbg/options.cpp:546
msgid ""
"\n"
"No parameters present.\n"
msgstr ""
"\n"
"沒有參數。\n"

#: kxsldbgpart/libxsldbg/os_cmds.cpp:72
msgid "Error: No command processor available for shell command \"%1\".\n"
msgstr "錯誤：shell 命令 \"%1\" 找不到處理器。\n"

#: kxsldbgpart/libxsldbg/os_cmds.cpp:77
msgid "Information: Starting shell command \"%1\".\n"
msgstr "資訊：開始執行 shell 命令 \"%1\"。\n"

#: kxsldbgpart/libxsldbg/os_cmds.cpp:92
msgid "Information: Finished shell command.\n"
msgstr "資訊：已完成 shell 命令。\n"

#: kxsldbgpart/libxsldbg/os_cmds.cpp:96
msgid "Error: Unable to run command. System error %1.\n"
msgstr "錯誤：無法執行命令。系統錯誤 %1。\n"

#: kxsldbgpart/libxsldbg/param_cmds.cpp:48
msgid "Failed to add parameter"
msgstr "加入參數失敗"

#: kxsldbgpart/libxsldbg/param_cmds.cpp:96
msgid "Failed to delete parameter"
msgstr "刪除參數失敗"

#: kxsldbgpart/libxsldbg/param_cmds.cpp:112
msgid "Error: Unable to find parameter %1.\n"
msgstr "錯誤：找不到參數 %1。\n"

#: kxsldbgpart/libxsldbg/param_cmds.cpp:146
msgid "Unable to print parameters"
msgstr "無法列印參數"

#: kxsldbgpart/libxsldbg/search.cpp:414
msgid ""
"Error: Unable to write search Database to file %1. Try setting the "
"\"searchresultspath\" option to a writable path.\n"
msgstr ""
"錯誤：無法將搜尋資料庫寫入檔案 %1。請試著將 searchresultspath 遠項設定為一個"
"可寫入的路徑。\n"

#: kxsldbgpart/libxsldbg/search.cpp:489
msgid "Information: Transformed %1 using %2 and saved to %3.\n"
msgstr "資訊：已使用 %2 轉換 %1 並儲存到 %3。\n"

#: kxsldbgpart/libxsldbg/search.cpp:730
msgid "Error: XSLT template named \"%1\" was not found.\n"
msgstr "錯誤：找不到 XSLT 樣本名稱 \"%1\"。\n"

#: kxsldbgpart/libxsldbg/search_cmds.cpp:52
msgid "Error: No path to documentation; aborting searching.\n"
msgstr "錯誤：沒有文件路徑。搜尋中斷。\n"

#: kxsldbgpart/libxsldbg/search_cmds.cpp:54
msgid "Error: Error in value of USE_DOCS_MACRO; look at Makefile.am.\n"
msgstr "錯誤：USE_DOCS_MACRO 的值錯誤。請查看 Makefile.am。\n"

#: kxsldbgpart/libxsldbg/search_cmds.cpp:56
msgid ""
"Error: Required environment variable %1 not set to the directory of xsldbg "
"documentation.\n"
msgstr "錯誤：未將必要的環境變數 %1 設定為 xsldbg 文件的目錄。\n"

#: kxsldbgpart/libxsldbg/search_cmds.cpp:62
msgid "Error: Stylesheet not valid, files not loaded yet?\n"
msgstr "錯誤：樣式表不合法。檔案尚未載入嗎？\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:135
msgid " template: \"%1\" mode: \"%2\" in file \"%3\" at line %4\n"
msgstr "樣本：\"%1\" 模式：\"%2\" 檔案：\"%3\" 行號：\"%4\"\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:184
#: kxsldbgpart/libxsldbg/variable_cmds.cpp:36
msgid "Error: Stylesheet is not valid.\n"
msgstr "錯誤：樣式表不合法。\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:226
msgid "\tNo XSLT templates found.\n"
msgstr "\t找不到 XSLT 樣本。\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:228
#, c-format
msgid ""
"_n: \tTotal of %n XSLT template found\n"
"\tTotal of %n XSLT templates found"
msgstr "\t總共找到 %n 個 XSLT 樣本"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:229
#, c-format
msgid ""
"_n: \tTotal of %n XSLT template printed\n"
"\tTotal of %n XSLT templates printed"
msgstr "\t總共列印 %n 個 XSLT 樣本"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:261
#: kxsldbgpart/libxsldbg/template_cmds.cpp:290
msgid " Stylesheet %1\n"
msgstr " 樣式表 %1\n"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:325
#, c-format
msgid ""
"_n: \tTotal of %n XSLT stylesheet found.\n"
"\tTotal of %n XSLT stylesheets found."
msgstr "\t總共找到 %n 個 XSLT 樣式表"

#: kxsldbgpart/libxsldbg/template_cmds.cpp:328
msgid "\tNo XSLT stylesheets found.\n"
msgstr "\t沒有找到任何 XSLT 樣式表。\n"

#: kxsldbgpart/libxsldbg/trace_cmds.cpp:69
msgid "Warning: Assuming normal speed.\n"
msgstr "警告：假設為正常速度。\n"

#: kxsldbgpart/libxsldbg/utils.cpp:111
msgid "Error: Unmatched quotes in input.\n"
msgstr "錯誤：輸入中的引號不對稱。\n"

#: kxsldbgpart/libxsldbg/variable_cmds.cpp:99
msgid ""
"Error: Cannot change a variable that does not use the select attribute.\n"
msgstr "錯誤：無法變更未使用 select 屬性的變數。\n"

#: kxsldbgpart/libxsldbg/variable_cmds.cpp:102
msgid "Error: Variable %1 was not found.\n"
msgstr "錯誤：找不到變數 %1。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:270 kxsldbgpart/libxsldbg/xsldbg.cpp:298
#: kxsldbgpart/libxsldbg/xsldbg.cpp:320
msgid "%1 took %2 ms to complete.\n"
msgstr "%1 花了 %2 毫秒完成。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:361
#, c-format
msgid "XInclude processing %1."
msgstr "XInclude 處理 %1。"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:399 kxsldbgpart/libxsldbg/xsldbg.cpp:446
msgid "Error: Unable to write temporary results to %1.\n"
msgstr "錯誤：無法將暫時結果寫到 %1。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:409
#, c-format
msgid ""
"_n: Applying stylesheet %n time\n"
"Applying stylesheet %n times"
msgstr "套用樣式表 %n 次"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:412
msgid "Applying stylesheet"
msgstr "套用樣式表"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:473 kxsldbgpart/libxsldbg/xsldbg.cpp:491
msgid "Saving result"
msgstr "儲存結果"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:476
msgid "Warning: Generating non-standard output XHTML.\n"
msgstr "警告：產生非標準輸出 XHTML 中。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:493
msgid "Warning: Unsupported, non-standard output method %1.\n"
msgstr "警告：未支援，非標準輸出方法 %1。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:509
msgid "Running stylesheet and saving result"
msgstr "執行樣式表並儲存結果中"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:516
msgid "Error: Unable to save results of transformation to file %1.\n"
msgstr "錯誤：無法儲存轉換結果到檔案 %1。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:558 kxsldbgpart/libxsldbg/xsldbg.cpp:887
#: kxsldbgpart/libxsldbg/xsldbg.cpp:919 kxsldbgpart/libxsldbg/xsldbg.cpp:997
msgid "Fatal error: Aborting debugger due to an unrecoverable error.\n"
msgstr "嚴重錯誤：因為無法修復的錯誤而中止除錯器。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:683
msgid ""
"Warning: Too many libxslt parameters provided via the command line option --"
"param.\n"
msgstr "警告：命令列選項 --param 提供了太多 libxslt 參數。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:692
msgid ""
"Error: Argument \"%1\" to --param is not in the format <name>:<value>.\n"
msgstr "錯誤：--param 參數 \"%1\" 的格式不是 <name>:<value>。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:744
msgid ""
"\n"
"Starting stylesheet\n"
"\n"
msgstr ""
"\n"
"啟動樣式表\n"
"\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:755
msgid "Error: No XSLT source file supplied.\n"
msgstr "錯誤：沒有提供 XSLT 源碼檔案。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:758
msgid "Error: No XML data file supplied.\n"
msgstr "錯誤：沒有提供 XML 資料檔。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:795
msgid ""
"\n"
"Debugger never received control.\n"
msgstr ""
"\n"
"除錯器ˋ無法接收控制。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:800
msgid ""
"\n"
"Finished stylesheet\n"
"\n"
msgstr ""
"\n"
"已完成的樣式表\n"
"\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:857
msgid ""
"Going to the command shell; not all xsldbg commands will work as not all "
"needed have been loaded.\n"
msgstr ""
"到命令列中的話，不是所有的 xsldbg 命令都能使用，因為不是所有需要的東西都能載"
"入。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:914
#, c-format
msgid "Parsing stylesheet %1"
msgstr "剖析樣式表 %1 中"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:916
msgid "Error: Cannot parse file %1.\n"
msgstr "錯誤：無法剖析檔案 %1。\n"

#: kxsldbgpart/libxsldbg/xsldbg.cpp:995 kxsldbgpart/libxsldbg/xsldbg.cpp:1043
msgid "Error: Unable to parse file %1.\n"
msgstr "錯誤：無法剖析檔案 %1。\n"

#: kxsldbgpart/xsldbgbreakpointlistitem.cpp:38
#: kxsldbgpart/xsldbgbreakpoints.ui:81
#, no-c-format
msgid "Enabled"
msgstr "已開啟"

#: kxsldbgpart/xsldbgbreakpointlistitem.cpp:40
msgid "Disabled"
msgstr "已關閉"

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:83
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:92
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:115
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:120
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:143
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:148 kxsldbgpart/xsldbgdebugger.cpp:297
#: kxsldbgpart/xsldbgdebugger.cpp:317 kxsldbgpart/xsldbgdebugger.cpp:335
#: kxsldbgpart/xsldbgdebugger.cpp:355 kxsldbgpart/xsldbgdebugger.cpp:375
#: kxsldbgpart/xsldbgdebugger.cpp:394
msgid "Operation Failed"
msgstr "操作失敗"

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:84
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:116
#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:144
msgid "A line number was provided without a file name."
msgstr "提供了行號但沒有檔名。"

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:93
msgid "No details provided or an invalid line number was supplied."
msgstr "沒有提供詳情，或是行號不正確。"

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:121
msgid "No details provided or an invalid line or ID was supplied."
msgstr "沒有提供詳情，或是行號或代碼不正確。"

#: kxsldbgpart/xsldbgbreakpointsimpl.cpp:149
msgid "No details provided."
msgstr "沒有提供詳情。"

#: kxsldbgpart/xsldbgconfigimpl.cpp:191
msgid "\t\"XSL source\" \n"
msgstr "\t\"XSL 源碼\"\n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:193
msgid "\t\"XML data\" \n"
msgstr "\t\"XML 資料\"\n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:195
msgid "\t\"Output file\" \n"
msgstr "\t\"輸出檔案\"\n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:197
msgid "Missing values for \n"
msgstr "缺乏值：\n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:201
msgid "Output file is the same as either XSL Source or XML Data file\n"
msgstr "輸出檔案與 XSL 源碼檔或 XML 資料檔相同\n"

#: kxsldbgpart/xsldbgconfigimpl.cpp:220
msgid ""
"The following libxslt parameters are empty\n"
"\t"
msgstr ""
"底下的 libxslt 參數是空的：\n"
"\t"

#: kxsldbgpart/xsldbgconfigimpl.cpp:370
msgid "Choose XSL Source to Debug"
msgstr "選擇要除錯的 XSL 源碼檔"

#: kxsldbgpart/xsldbgconfigimpl.cpp:382
msgid "Choose XML Data to Debug"
msgstr "選擇要除錯的 XML 資料檔"

#: kxsldbgpart/xsldbgconfigimpl.cpp:393
msgid "Choose Output File for XSL Transformation"
msgstr "選擇要做 XSL 轉換的輸出檔"

#: kxsldbgpart/xsldbgconfigimpl.cpp:484
msgid "Suspect Configuration"
msgstr "猜測設定"

#: kxsldbgpart/xsldbgconfigimpl.cpp:488
msgid "Incomplete or Invalid Configuration"
msgstr "不完整或不合法的設定"

#: kxsldbgpart/xsldbgdebugger.cpp:298 kxsldbgpart/xsldbgdebugger.cpp:318
#: kxsldbgpart/xsldbgdebugger.cpp:336 kxsldbgpart/xsldbgdebugger.cpp:356
#: kxsldbgpart/xsldbgdebugger.cpp:376 kxsldbgpart/xsldbgdebugger.cpp:395
msgid "Cannot set/edit breakpoints on the output file."
msgstr "無法設定或編輯輸出檔案的中斷點。"

#: kxsldbgpart/xsldbginspector.cpp:68
msgid "Xsldbg Inspector"
msgstr "Xsldbg 檢查員"

#: kxsldbgpart/xsldbginspector.cpp:77
msgid "Breakpoints"
msgstr "中斷點"

#: kxsldbgpart/xsldbginspector.cpp:83
msgid "Variables"
msgstr "變數"

#: kxsldbgpart/xsldbginspector.cpp:89
msgid "CallStack"
msgstr "呼叫堆疊"

#: kxsldbgpart/xsldbginspector.cpp:95
msgid "Templates"
msgstr "樣本"

#: kxsldbgpart/xsldbginspector.cpp:101
msgid "Sources"
msgstr "源碼"

#: kxsldbgpart/xsldbginspector.cpp:107
msgid "Entities"
msgstr "實體"

#: kxsldbgpart/xsldbginspector.cpp:126
msgid "Apply changes to xsldbg after restarting execution"
msgstr "重新執行後套用變更到 xsldbg"

#: kxsldbgpart/xsldbginspector.cpp:133
msgid "&Refresh"
msgstr "刷新(&R)"

#: kxsldbgpart/xsldbginspector.cpp:134
msgid "Refresh values in inspectors from xsldbg"
msgstr "從 xsldbg 刷新檢查員中的值"

#: kxsldbgpart/xsldbglocallistitem.cpp:32
#: kxsldbgpart/xsldbglocalvariablesimpl.cpp:71
msgid "Local"
msgstr "本地端"

#: kxsldbgpart/xsldbglocallistitem.cpp:34
#: kxsldbgpart/xsldbglocalvariablesimpl.cpp:73
msgid "Global"
msgstr "全域"

#: kxsldbgpart/xsldbgoutputview.cpp:61
msgid "xsldbg Output"
msgstr "xsldbg 輸出"

#: kxsldbgpart/xsldbgoutputview.cpp:62
msgid ""
"\t\txsldbg output capture ready\n"
"\n"
msgstr ""
"\t\txsldbg 輸出拮取就緒\n"
"\n"

#: kxsldbgpart/xsldbgoutputview.cpp:76
msgid "Result of evaluation"
msgstr "計算結果"

#: kxsldbgpart/xsldbgoutputview.cpp:93
msgid "Request Failed "
msgstr "請求失敗"

#: main.cpp:9
msgid "A TDE KPart Application for xsldbg, an XSLT debugger"
msgstr "為 XSLT 除錯器 xsldbg 設計的 TDE KPart 應用程式"

#: main.cpp:14 xsldbgmain.cpp:96
msgid "XSL script to run"
msgstr "要執行的 XSL 文稿"

#: main.cpp:15 xsldbgmain.cpp:97
msgid "XML data to be transformed"
msgstr "要轉換的 XML 資料"

#: main.cpp:16
msgid "File to save results to"
msgstr "儲存結果的檔案"

#: main.cpp:22
msgid "KXSLDbg"
msgstr "KXSLDbg"

#: xsldbgmain.cpp:50
msgid "A TDE console application for xsldbg, an XSLT debugger"
msgstr "xsldbg 的 TDE 主控台應用程式，XSLT 除錯器"

#: xsldbgmain.cpp:56
msgid "Start a shell"
msgstr "啟動 shell"

#: xsldbgmain.cpp:57
msgid "Path to change into before loading files"
msgstr "在載入檔案前要切換的路徑"

#: xsldbgmain.cpp:58
msgid "Add a parameter named <name> and value <value> to XSL environment"
msgstr "在 XSL 環境中新增名為 <name> 與值為 <value> 的參數"

#: xsldbgmain.cpp:59
msgid "Use ISO 639 language code specified; for example en_US"
msgstr "使用 ISO 639 語言代碼，例如 en_US"

#: xsldbgmain.cpp:59
msgid "Save to a given file. See output command documentation"
msgstr "儲存到指定檔案。請參考輸出指令說明"

#: xsldbgmain.cpp:60
msgid "Show the version of libxml and libxslt used"
msgstr "顯示 libxml 與 libxslt 使用的版本"

#: xsldbgmain.cpp:61
msgid "Show logs of what is happening"
msgstr "顯示事件紀錄"

#: xsldbgmain.cpp:62
msgid "Display the time used"
msgstr "顯示使用時間"

#: xsldbgmain.cpp:63
msgid "Run the transformation 20 times"
msgstr "執行廿次轉換"

#: xsldbgmain.cpp:65
msgid "Dump the tree of the result instead"
msgstr "改傾印結果樹"

#: xsldbgmain.cpp:67
msgid "Disable the DTD loading phase"
msgstr "關閉 DTD 載入工作階段"

#: xsldbgmain.cpp:68
msgid "Disable the output of the result"
msgstr "關閉結果輸出"

#: xsldbgmain.cpp:69
msgid "Increase the maximum depth"
msgstr "遞增最大深度"

#: xsldbgmain.cpp:72
msgid "The input document is(are) an HTML file(s)"
msgstr "輸入的文件是 HTML 檔"

#: xsldbgmain.cpp:76
msgid "The input document is SGML docbook"
msgstr "輸入的文件是 SGML docbook 檔"

#: xsldbgmain.cpp:79
msgid "Disable the fetching DTDs or entities over network"
msgstr "關閉從網路上抓取 DTD 或實體的功能"

#: xsldbgmain.cpp:82
msgid "Use the catalogs from $SGML_CATALOG_FILES"
msgstr "使用 $SGML_CATALOG_FILES 的目錄"

#: xsldbgmain.cpp:86
msgid "Disable XInclude processing on document input"
msgstr "文件輸入時關閉 XInclude 處理"

#: xsldbgmain.cpp:89
msgid "Print profiling informations"
msgstr "列印設定檔資訊"

#: xsldbgmain.cpp:90
msgid "Do not run gdb compatability mode and print less information"
msgstr "不要以 gdb 相容模式執行，並印出較少資訊"

#: xsldbgmain.cpp:91
msgid "Detect and use encodings in the stylesheet"
msgstr "偵測與使用樣式表中的編碼"

#: xsldbgmain.cpp:92
msgid "Treat command line input as encoded in UTF-8"
msgstr "命令列輸入一律當成 UTF-8 編碼"

#: xsldbgmain.cpp:93
msgid "Use HTML output when generating search reports"
msgstr "產生搜尋報告時使用 HTML 輸出"

#: xsldbgmain.cpp:94
msgid ""
"Print all error messages to stdout, normally error messages go to stderr"
msgstr ""
"將所有的錯誤列印到標準輸出（stdout）。通常錯誤訊息都是丟到標準錯誤（stderr）"

#: xsldbgmain.cpp:95
msgid ""
"Disable the automatic restarting of execution when current processing pass "
"is complete"
msgstr "目前行程階段完成後關閉自動重新執行功能"

#: xsldbgmain.cpp:123
msgid "Using libxml %1, libxslt %2 and libexslt %3\n"
msgstr "使用 libxml %1, libxslt %2 與 libexslt %3\n"

#: xsldbgmain.cpp:124
msgid "xsldbg was compiled against libxml %1, libxslt %2 and libexslt %3\n"
msgstr "xsldbg 編譯時使用了 libxml %1，libxslt %2 與 libexslt %3\n"

#: xsldbgmain.cpp:125
msgid "libxslt %1 was compiled against libxml %2\n"
msgstr "libxslt %1 編譯時使用了 libxml %2\n"

#: xsldbgmain.cpp:126
msgid "libexslt %1 was compiled against libxml %2\n"
msgstr "libexslt %1 編譯時使用了 libxml %2\n"

#: xsldbgmain.cpp:129
msgid "Xsldbg"
msgstr "Xsldbg"

#: kxsldbg_shell.rc:9 kxsldbgpart/kxsldbg_part.rc:4
#, no-c-format
msgid "Debug"
msgstr "除錯"

#: kxsldbgpart/xsldbgbreakpoints.ui:17
#, no-c-format
msgid "Xsldbg Breakpoints"
msgstr "Xsldbg 中斷點"

#: kxsldbgpart/xsldbgbreakpoints.ui:26
#, no-c-format
msgid "ID"
msgstr "代碼"

#: kxsldbgpart/xsldbgbreakpoints.ui:37 kxsldbgpart/xsldbgglobalvariables.ui:40
#: kxsldbgpart/xsldbglocalvariables.ui:150 kxsldbgpart/xsldbgtemplates.ui:32
#, no-c-format
msgid "Name"
msgstr "名稱"

#: kxsldbgpart/xsldbgbreakpoints.ui:48 kxsldbgpart/xsldbgtemplates.ui:43
#, no-c-format
msgid "Mode"
msgstr "模式"

#: kxsldbgpart/xsldbgbreakpoints.ui:59
#, no-c-format
msgid "File Name"
msgstr "檔案名稱"

#: kxsldbgpart/xsldbgbreakpoints.ui:70 kxsldbgpart/xsldbgcallstack.ui:54
#: kxsldbgpart/xsldbgtemplates.ui:65
#, no-c-format
msgid "Line Number"
msgstr "行號"

#: kxsldbgpart/xsldbgbreakpoints.ui:102
#, no-c-format
msgid "Click breakpoint in list to modify or delete it"
msgstr "點選清單中的中斷點可以修改或刪除"

#: kxsldbgpart/xsldbgbreakpoints.ui:138
#, no-c-format
msgid "ID:"
msgstr "代碼："

#: kxsldbgpart/xsldbgbreakpoints.ui:146
#, no-c-format
msgid "Line number:"
msgstr "行號："

#: kxsldbgpart/xsldbgbreakpoints.ui:154
#, no-c-format
msgid "You don't need to specify directory for file name"
msgstr "您不需要為檔名指定目錄。"

#: kxsldbgpart/xsldbgbreakpoints.ui:162
#, no-c-format
msgid "Template name or match name to look for"
msgstr "要搜尋的樣本名稱或比對名稱"

#: kxsldbgpart/xsldbgbreakpoints.ui:198 kxsldbgpart/xsldbgbreakpoints.ui:253
#, no-c-format
msgid "Must be positive"
msgstr "必須是正數"

#: kxsldbgpart/xsldbgbreakpoints.ui:285
#, no-c-format
msgid "Mode:"
msgstr "模式："

#: kxsldbgpart/xsldbgbreakpoints.ui:293
#, no-c-format
msgid "Name:"
msgstr "名稱："

#: kxsldbgpart/xsldbgbreakpoints.ui:301
#, no-c-format
msgid "File name:"
msgstr "檔案名稱："

#: kxsldbgpart/xsldbgbreakpoints.ui:375
#, no-c-format
msgid "Delete breakpoint using ID"
msgstr "使用代碼刪除中斷點"

#: kxsldbgpart/xsldbgbreakpoints.ui:386
#, no-c-format
msgid "Clear entered text"
msgstr "清除輸入的文字"

#: kxsldbgpart/xsldbgbreakpoints.ui:394
#, no-c-format
msgid "Add All"
msgstr "全部新增"

#: kxsldbgpart/xsldbgbreakpoints.ui:397
#, no-c-format
msgid "Add breakpoint on all templates found"
msgstr "在全部找到的樣本中新增中斷點"

#: kxsldbgpart/xsldbgbreakpoints.ui:408
#, no-c-format
msgid "Delete all breakpoints"
msgstr "刪除所有的中斷點"

#: kxsldbgpart/xsldbgbreakpoints.ui:416
#, no-c-format
msgid "Enable"
msgstr "開啟"

#: kxsldbgpart/xsldbgbreakpoints.ui:419
#, no-c-format
msgid "Enable breakpoint using ID"
msgstr "使用代碼開啟中斷點"

#: kxsldbgpart/xsldbgbreakpoints.ui:430
#, no-c-format
msgid "Add breakpoint using file name with line number or a template name"
msgstr "使用檔名與行號或是樣本名稱新增中斷點"

#: kxsldbgpart/xsldbgbreakpoints.ui:488 kxsldbgpart/xsldbgcallstack.ui:114
#: kxsldbgpart/xsldbgentities.ui:125 kxsldbgpart/xsldbgglobalvariables.ui:229
#: kxsldbgpart/xsldbglocalvariables.ui:324 kxsldbgpart/xsldbgsources.ui:111
#, no-c-format
msgid "Refresh"
msgstr "刷新"

#: kxsldbgpart/xsldbgcallstack.ui:17
#, no-c-format
msgid "Xsldbg Callstack"
msgstr "Xsldbg 呼叫堆疊"

#: kxsldbgpart/xsldbgcallstack.ui:32
#, no-c-format
msgid "Frame# Template Name"
msgstr "框架# 樣本 名稱"

#: kxsldbgpart/xsldbgcallstack.ui:43 kxsldbgpart/xsldbgtemplates.ui:54
#, no-c-format
msgid "Source File Name"
msgstr "源碼檔案名稱"

#: kxsldbgpart/xsldbgcallstack.ui:75
#, no-c-format
msgid "Oldest Frame # is 0, Frame # has been added to the first column"
msgstr "最舊的框架編號為 0，框架編號已新增到第一個欄位"

#: kxsldbgpart/xsldbgconfig.ui:31
#, no-c-format
msgid "KXsldbg Configuration"
msgstr "KXsldbg 設定"

#: kxsldbgpart/xsldbgconfig.ui:75
#, no-c-format
msgid "LibXSLT Parameters"
msgstr "LibXSLT 參數"

#: kxsldbgpart/xsldbgconfig.ui:108
#, no-c-format
msgid "Parameter value:"
msgstr "參數值："

#: kxsldbgpart/xsldbgconfig.ui:148
#, no-c-format
msgid "Parameter name:"
msgstr "參數名稱："

#: kxsldbgpart/xsldbgconfig.ui:229
#, no-c-format
msgid "Prev"
msgstr "前一個"

#: kxsldbgpart/xsldbgconfig.ui:464
#, no-c-format
msgid "Output file:"
msgstr "輸出檔案："

#: kxsldbgpart/xsldbgconfig.ui:488 kxsldbgpart/xsldbgconfig.ui:536
#: kxsldbgpart/xsldbgconfig.ui:584
#, no-c-format
msgid "..."
msgstr "..."

#: kxsldbgpart/xsldbgconfig.ui:512
#, no-c-format
msgid "XML data:"
msgstr "XML 資料："

#: kxsldbgpart/xsldbgconfig.ui:560
#, no-c-format
msgid "XSL source:"
msgstr "XSL 源碼："

#: kxsldbgpart/xsldbgconfig.ui:621
#, no-c-format
msgid "catalogs"
msgstr "目錄"

#: kxsldbgpart/xsldbgconfig.ui:624
#, no-c-format
msgid "use catalogs from $SGML_CATALOGS_FILES"
msgstr "使用 $SGML_CATALOGS_FILES 中的目錄"

#: kxsldbgpart/xsldbgconfig.ui:632
#, no-c-format
msgid "novalid"
msgstr "novalid"

#: kxsldbgpart/xsldbgconfig.ui:635
#, no-c-format
msgid "skip the DTD loading phase"
msgstr "忽略 DTD 載入階段"

#: kxsldbgpart/xsldbgconfig.ui:643
#, no-c-format
msgid "html"
msgstr "html"

#: kxsldbgpart/xsldbgconfig.ui:646
#, no-c-format
msgid "the input document is(are) an HTML file(s)"
msgstr "輸入的文件為 HTML 檔"

#: kxsldbgpart/xsldbgconfig.ui:654
#, no-c-format
msgid "docbook"
msgstr "docbook"

#: kxsldbgpart/xsldbgconfig.ui:657
#, no-c-format
msgid "the input document is SGML docbook"
msgstr "輸入的文件為 SGML 檔"

#: kxsldbgpart/xsldbgconfig.ui:665
#, no-c-format
msgid "debug"
msgstr "debug"

#: kxsldbgpart/xsldbgconfig.ui:668
#, no-c-format
msgid "dump the tree of the result instead"
msgstr "改為傾印結果樹"

#: kxsldbgpart/xsldbgconfig.ui:676
#, no-c-format
msgid "noout"
msgstr "noout"

#: kxsldbgpart/xsldbgconfig.ui:679
#, no-c-format
msgid "do not dump the result"
msgstr "不要傾印結果"

#: kxsldbgpart/xsldbgconfig.ui:687
#, no-c-format
msgid "profile"
msgstr "profile"

#: kxsldbgpart/xsldbgconfig.ui:690
#, no-c-format
msgid "print profiling information"
msgstr "列印設定檔資訊"

#: kxsldbgpart/xsldbgconfig.ui:698
#, no-c-format
msgid "timing"
msgstr "timing"

#: kxsldbgpart/xsldbgconfig.ui:701
#, no-c-format
msgid "display the time used"
msgstr "顯示使用的時間"

#: kxsldbgpart/xsldbgconfig.ui:709
#, no-c-format
msgid "nonet"
msgstr "nonet"

#: kxsldbgpart/xsldbgconfig.ui:712
#, no-c-format
msgid "refuse to fetch DTDs or entities over network"
msgstr "拒絕從網路上抓取 DTDs 或實體"

#: kxsldbgpart/xsldbgentities.ui:25
#, no-c-format
msgid "Xsldbg Entities"
msgstr "Xsldbg 實體"

#: kxsldbgpart/xsldbgentities.ui:40
#, no-c-format
msgid "PublicID"
msgstr "公開代碼"

#: kxsldbgpart/xsldbgentities.ui:51
#, no-c-format
msgid "SystemID"
msgstr "系統代碼"

#: kxsldbgpart/xsldbgglobalvariables.ui:25
#, no-c-format
msgid "Xsldbg Global Variables"
msgstr "Xsldbg 全域變數"

#: kxsldbgpart/xsldbgglobalvariables.ui:51
#: kxsldbgpart/xsldbglocalvariables.ui:183 kxsldbgpart/xsldbgsources.ui:32
#, no-c-format
msgid "Source File"
msgstr "源碼檔案"

#: kxsldbgpart/xsldbgglobalvariables.ui:62
#: kxsldbgpart/xsldbglocalvariables.ui:194
#, no-c-format
msgid "Source Line Number"
msgstr "源碼行號"

#: kxsldbgpart/xsldbgglobalvariables.ui:150
#: kxsldbgpart/xsldbglocalvariables.ui:87
#, no-c-format
msgid "Expression:"
msgstr "表示式："

#: kxsldbgpart/xsldbgglobalvariables.ui:158
#: kxsldbgpart/xsldbglocalvariables.ui:95
#, no-c-format
msgid "Enter a valid XPath expression"
msgstr "請輸入合法的 XPath 表示式"

#: kxsldbgpart/xsldbgglobalvariables.ui:188
#: kxsldbgpart/xsldbglocalvariables.ui:125
#, no-c-format
msgid "Result of evaluation will appear in message window"
msgstr "計算結果會出現在訊息視窗中"

#: kxsldbgpart/xsldbglocalvariables.ui:25
#, no-c-format
msgid "Xsldbg Local Variables"
msgstr "Xsldbg 本地端變數"

#: kxsldbgpart/xsldbglocalvariables.ui:161
#, no-c-format
msgid "Template Context"
msgstr "樣本內容"

#: kxsldbgpart/xsldbglocalvariables.ui:172
#, no-c-format
msgid "Type"
msgstr "型態"

#: kxsldbgpart/xsldbglocalvariables.ui:228
#, no-c-format
msgid "Variable expression:"
msgstr "變數表示式："

#: kxsldbgpart/xsldbglocalvariables.ui:249
#, no-c-format
msgid "Variable type:"
msgstr "變數型態："

#: kxsldbgpart/xsldbglocalvariables.ui:270
#, no-c-format
msgid "Set Expression"
msgstr "設定表示式"

#: kxsldbgpart/xsldbglocalvariables.ui:273
#, no-c-format
msgid "Set the selection for variable "
msgstr "設定選取的變數"

#: kxsldbgpart/xsldbglocalvariables.ui:283
#, no-c-format
msgid "Variable name:"
msgstr "變數名稱："

#: kxsldbgpart/xsldbgmsgdialog.ui:26
#, no-c-format
msgid "qxsldbg Message"
msgstr "qxsldbg 訊息"

#: kxsldbgpart/xsldbgmsgdialog.ui:71
#, no-c-format
msgid "TextLabel1"
msgstr "TextLabel1"

#: kxsldbgpart/xsldbgsources.ui:17
#, no-c-format
msgid "Xsldbg Source Files"
msgstr "Xsldbg 源碼檔案"

#: kxsldbgpart/xsldbgsources.ui:43
#, no-c-format
msgid "Parent File"
msgstr "父母檔案"

#: kxsldbgpart/xsldbgsources.ui:54
#, no-c-format
msgid "Parent Line Number"
msgstr "父母行號"

#: kxsldbgpart/xsldbgtemplates.ui:17
#, no-c-format
msgid "Xsldbg Templates"
msgstr "Xsldbg 樣本"

#: kxsldbgpart/xsldbgwalkspeed.ui:17
#, no-c-format
msgid "Configure xsldbg's Walk Speed"
msgstr "設定 xsldbg 執行速度"

#: kxsldbgpart/xsldbgwalkspeed.ui:51
#, no-c-format
msgid ""
"Change the speed at which xsldbg walks through execution of the stylesheet."
msgstr "改變 xsldbg 「走過」樣式表時的執行速度"

#: kxsldbgpart/xsldbgwalkspeed.ui:95
#, no-c-format
msgid "Slow"
msgstr "慢"

#: kxsldbgpart/xsldbgwalkspeed.ui:117
#, no-c-format
msgid "Fast"
msgstr "快"

#~ msgid "Warning: The %1 command is disbled\n"
#~ msgstr "警告：命令 %1 已關閉。\n"