tdelibs/tdecore/DESIGN.tdeconfig

tdeconfigdata.h contains definitions of the data formats used by tdeconfig.

Configuration entries are stored as "KEntry". They are indexed with "KEntryKey".
The primary store is a "KEntryMap" which is defined as a QMap from "KEntryKey"
to "KEntry"

KEntry's are stored in order in the KEntryMap. The most significant sort 
criteria is mGroup. This means that all entries who belong in the same group,
are grouped in the QMap as well. 

The start of a group is indicated with a KEntryKey with an empty mKey and a 
dummy KEntry. This allows us to search for the start of the group and then to 
iterate until we end up in another group. That way we will find all entries
of a certain group.

Entries that are localised with the _current_ locale are stored with bLocal 
set to true. Entries that are localised with another locale are either not
stored at all (default), or with the localization as part of the key (when
reading a file in order to merge it). 
[WABA: Does it make sense to keep both localized and non-localised around?
Can't we just let the localised version override the non-localised version?]

Currently the localization bit is the least significant sort criteria, that 
means that the localised version always follows the non-localised version
immediately.

<Changed for KDE 3.0>
Entries that are being read from a location other than the location to
which is written back are marked as "default" and will be added both as
normal entry as well as an entry with the key marked as default.

When entries are written to disk, it is checked whether the entry to write 
is equal to the default, if so the entry will not be written. The default
entry always follows directly after the normal entry, due to the sorting.
(After that the localised version follows)

When entries are written to disk, it is checked whether the entry to write 
is equal to the default, if so the entry will not be written.
</Changed>

Open question:
Should unmodified entries that are written back be compared with the default
too? This seems to be mostly a transition issue.

<Changed during KDE 3.0 / 3.2>
Extra functions:

bool entryIsImmutable(key); // Can entry be modified?
bool hasDefault(key); // Is there a system wide default set for the entry?
void revertToDefault(key); // Restore to default
void deleteEntry(key); // Remove entry

Note that there is a subtle difference between revertToDefault() and deleteEntry().
revertToDefault() will change the entry to the default value set by the system 
administrator (Via e.g. $TDEDIR/share/config) or, if no such default was set,
non-existant.
deleteEntry() will make the entry non-existant.

Entries are marked "immutable" if the key is followed by [$i]. This means
that a user can not override these entries.

Entries can be marked as deleted if they are followed by [$d]. This
is needed if the system administrator has specified a default value but the
entry was deleted (made 'non-existant'). In that case we can't just leave 
the entry out since that would mean we get the default from the system 
administrator back the next time we read the file.
</changed>

When an entry is read with readEntry(key, defaultValue), non-existing
entries will return "defaultValue" while hasKey(key) will return "false"
for such entries.

Currently all entries are stored in memory. When TDEConfig is "sync()'ed"
it reads the file that it is about to overwrite (for the second time), it 
then merges in the entries it has in memory and writes the result back to 
the file. It does NOT update its map of entries in memory with the entries
(re)read from disk. It only updates the entries in memory when 
"reparseConfiguration()" is called.


Open Question: The standard writeEntry() function returns the original value,
is this needed? Nobody seems to use it. 

Open Question: The bPersistent flag doesn't seem to be used... could it be removed?

Open Question: Is the bNLS flag needed? Localised entries seem to be mostly
useful for default files, are they ever created by the user itself?

Open Question: Would it be worthwhile to lock a user option that is equal to the 
default so that it doesn't change when the default changes?


KDE3.0 Changes
==============

*) writeEntry now returns void instead of QString.
*) deleteEntry functions added


------------------------------------------------------------------------------

TDEConfig XT
==========

My buzzword picker offered TDEConfig XT ("eXtended Technology") and TDEConfig NG 
("Next Generation").  Since the planned changes are ment to be evolutionary 
rather than revolutionary, TDEConfig NG was dropped.

Goals
=====

* Have the default value for config entries defined in 1 place. Currently it is
not uncommon to have them defined in three places:
  1) In the application that reads the setting in order to use it
  2) In the settings dialog when reading the setting
  3) In the settings dialog when selecting "Use defaults".

* Provide type-information about config entries to facilate "KConfEdit" like 
tools. Ideally type-information also includes range-information; this is even
mandatory if enums become an explicit type.

* Facilitate the documentation of config entries.


Instead of relying on the defaults that are hard-coded in the application, 
rely on default configuration files being installed in $TDEDIR. The technical
changes required for this are very minimal, it is mostly a change in policy.

Type information can be provide by preceding every entry with a formalized 
comment.

Work to be done:
* TDEConfig needs to be extended to provide access to the default values provided 
by the default config files. TDEConfig already stores this information internally.
(DONE)
* A formal comment structure needs to be designed that can convey type-information.
Preferably in such a way that it is easily parsable by both machine and user.
* TDEConfig needs to be extended, or another class created, that is able to parse
the formalized comments.
* A tool needs to be developed that can assist developers with the generation
and verification of default configuration files including type-information.

Drawbacks:
* We rely on default configuration files being properly installed. 
* The user can break applications by making improper modifications to these 
files.
* It is not possible to store defaults settings in a config file that are 
of a dynamic nature. Examples are settings derived from other settings, 
e.g. a color setting could be derived from the current color theme, or
e.g. the default high score user name which is determined by the user
currently logged in.


Some random ideas:
* The format of the entries would be something like this:

[Mail Settings]
#!Type=string
#!Description=SMTP server to use for sending mail
#!Description[nl]=SMTP server voor het versturen van mail
Host=wantelbos.zogje.fr

- the type could be subclassed more, e.g. strings can be "email", "hostname",
  "url", etc.

- having translations in these files is very arguable. external po's would be
  better.



Class overview

                       TDEConfigBase
                            |
                            v
 TDEConfigBackend  <-----> TDEConfig <------> TDEConfigSkeleton           /--< myapp.kcfg
       |                    |                    |                 /
       v                    v                    |*---------------<
TDEConfigINIBackend      KSimpleConfig             |tdeconfig_compiler \
                                                 |                  \--< myconfig.kcfg-codegen
                                                 v                                                    
                                             MyConfig <-----TDEConfigDialogManager----> MyConfigWidget *---< myconfigwidget.ui
                                                                                                      uic

TDEConfigBase: defines API for generic config class

TDEConfig: functional generic config class that supports merging of cascaded
         configuration files

KSimpleConfig: functional generic config class without support for cascading
               configuration files.

TDEConfigBackend: defines API for config backend, t.i. the actual handling
                of the storage method and storage format.

TDEConfigINIBackend: the standard (and only one so far) class that implements
                   the config backend using the file-based .INI format
                   for configuration files

TDEConfigSkeleton: base class for deriving classes that store application
                 specific options providing type-safety and single-point
                 defaults.

MyConfig: An application specific class that offers configuration options
          to the applications via variables or accessor functions and that
          handles type-safety and defaults. MyConfig is just an example
          name, the application developer choses the actual name.

myapp.kcfg: File describing the configuration options used by a specific
            application. myapp.kcfg is just an example name, the application
            developer choses the actual name.

myconfig.kcfg-codegen: Implementation specific code generation instructions
                       for the MyConfig class. myconfig.kcfg-codegen is
                       just an example name, the application developer
                       choses the actual name.

TDEConfigDialogManager: Class that links widgets in a dialog up with their
                      corresponding confguration options in a configuration
                      object derived from TDEConfigSkeleton.

MyConfigWidget: Dialog generated from a .ui description file. Widget names
                in the dialog that start with "kcfg_" refer to configuration
                options.